Vlan code may need fdb change when changing mac address of bridge device
even if it is caused by the mac address changing of a bridge port.
Example configuration:
ip link set eth0 address 12:34:56:78:90:ab
ip link set eth1 address aa:bb:cc:dd:ee:ff
brctl addif br0 eth0
brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab
bridge vlan add dev br0 vid 10 self
bridge vlan add dev eth0 vid 10
We will have fdb entry such that f->dst == NULL, f->vlan_id == 10 and
f->addr == 12:34:56:78:90:ab at this time.
Next, change the mac address of eth0 to greater value.
ip link set eth0 address ee:ff:12:34:56:78
Then, mac address of br0 will be recalculated and set to aa:bb:cc:dd:ee:ff.
However, an entry aa:bb:cc:dd:ee:ff will not be created and we will be not
able to communicate using br0 on vlan 10.
Address this issue by deleting and adding local entries whenever
changing the mac address of the bridge device.
If there already exists an entry that has the same address, for example,
in case that br_fdb_changeaddr() has already inserted it,
br_fdb_change_mac_address() will simply fail to insert it and no
duplicated entry will be made, as it was.
This approach also needs br_add_if() to call br_fdb_insert() before
br_stp_recalculate_bridge_id() so that we don't create an entry whose
dst == NULL in this function to preserve previous behavior.
Note that this is a slight change in behavior where the bridge device can
receive the traffic to the new address before calling
br_stp_recalculate_bridge_id() in br_add_if().
However, it is not a problem because we have already the address on the
new port and such a way to insert new one before recalculating bridge id
is taken in br_device_event() as well.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have been always failed to delete the old entry at
br_fdb_change_mac_address() because br_set_mac_address() updates
dev->dev_addr before calling br_fdb_change_mac_address() and
br_fdb_change_mac_address() uses dev->dev_addr to find the old entry.
That update of dev_addr is completely unnecessary because the same work
is done in br_stp_change_bridge_id() which is called right away after
calling br_fdb_change_mac_address().
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit bc9a25d21e ("bridge: Add vlan support for local fdb entries"),
br_fdb_changeaddr() has inserted a new local fdb entry only if it can
find old one. But if we have two ports where they have the same address
or user has deleted a local entry, there will be no entry for one of the
ports.
Example of problematic case:
ip link set eth0 address aa:bb:cc:dd:ee:ff
ip link set eth1 address aa:bb:cc:dd:ee:ff
brctl addif br0 eth0
brctl addif br0 eth1 # eth1 will not have a local entry due to dup.
ip link set eth1 address 12:34:56:78:90:ab
Then, the new entry for the address 12:34:56:78:90:ab will not be
created, and the bridge device will not be able to communicate.
Insert new entries regardless of whether we can find old entries or not.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
br_fdb_changeaddr() assumes that there is at most one local entry per port
per vlan. It used to be true, but since commit 36fd2b63e3 ("bridge: allow
creating/deleting fdb entries via netlink"), it has not been so.
Therefore, the function might fail to search a correct previous address
to be deleted and delete an arbitrary local entry if user has added local
entries manually.
Example of problematic case:
ip link set eth0 address ee:ff:12:34:56:78
brctl addif br0 eth0
bridge fdb add 12:34:56:78:90:ab dev eth0 master
ip link set eth0 address aa:bb:cc:dd:ee:ff
Then, the address 12:34:56:78:90:ab might be deleted instead of
ee:ff:12:34:56:78, the original mac address of eth0.
Address this issue by introducing a new flag, added_by_user, to struct
net_bridge_fdb_entry.
Note that br_fdb_delete_by_port() has to set added_by_user to 0 in cases
like:
ip link set eth0 address 12:34:56:78:90:ab
ip link set eth1 address aa:bb:cc:dd:ee:ff
brctl addif br0 eth0
bridge fdb add aa:bb:cc:dd:ee:ff dev eth0 master
brctl addif br0 eth1
brctl delif br0 eth0
In this case, kernel should delete the user-added entry aa:bb:cc:dd:ee:ff,
but it also should have been added by "brctl addif br0 eth1" originally,
so we don't delete it and treat it a new kernel-created entry.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konrad writes:
Please git pull the following branch:
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git stable/for-jens-3.14
which is based off v3.13-rc6. If you would like me to rebase it on
a different branch/tag I would be more than happy to do so.
The patches are all bug-fixes and hopefully can go in 3.14.
They deal with xen-blkback shutdown and cause memory leaks
as well as shutdown races. They should go to stable tree and if you
are OK with I will ask them to backport those fixes.
There is also a fix to xen-blkfront to deal with unexpected state
transition. And lastly a fix to the header where it was using the
__aligned__ unnecessarily.
Reserve space from 0x0 - __pa(swapper_pg_dir),
if kernel is loaded from 0, which is not DMAable.
It is causing problem with MMC driver and others
which want to add dma buffers to this space.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
All of them are DT-related.
- fixes for typos in i2c and ohci clocks
- addition of a USB host node for at91sam9n12ek
- 2 DT documentation updates that have been sent a long time ago
- a new board based on the sama5d36 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJS9QjhAAoJEAf03oE53VmQwwMIAMj6mM4Fv042REUssGIeVGlk
kmt3NzFeQI2ipTsgdwloAd53Hvty9RiX0ww4ZIGnxy8eZdEaRy6aDCohQsCvfYtx
LDcGdmIZ9056+62h/dqEbKYzs23j+diSJPe5sJF3/EHRRrRtBLSccEjnAMYI+Vqx
Gpj4XplbG89yXQZb1sKCCo9OsScu1ncdXs6G1ghZt1WhcvDwRuf/C0Af5KYCOibs
iXyMYxw7dd2VS8DxABxfi4xhW/ZZFR5ml66XdEW6MQLRG5Z33v7v7S9Wt0DV8uqd
C+naFnbm09/miHFX8bGZeI1Yaavs+UhKdD86fCn0Mn4uHNr4IdqqLGPEkZpjyJA=
=m41s
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
From Nicolas Ferre:
First series of AT91 fixes for 3.14.
All of them are DT-related.
- fixes for typos in i2c and ohci clocks
- addition of a USB host node for at91sam9n12ek
- 2 DT documentation updates that have been sent a long time ago
- a new board based on the sama5d36 SoC
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91: add Atmel's SAMA5D3 Xplained board
spi/atmel: document clock properties
mmc: atmel-mci: document clock properties
ARM: at91: enable USB host on at91sam9n12ek board
ARM: at91/dt: fix sama5d3 ohci hclk clock reference
ARM: at91/dt: sam9263: fix compatibility string for the I2C
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Select CONFIG_SOC_DRA7XX so that we can boot dra7-evm.
DRA7 family are A15 based processors that supports LPAE and an
evolutionary update to the OMAP5 generation of processors.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Since commit 9e8147bb5e
"ARM: imx6q: move low-power code out of clock driver"
the kernel fails to boot on i.MX6Q/D if preemption is
enabled (CONFIG_PREEMPT=y). The kernel just hangs
before the console comes up.
The above commit moved the initalization of the low-power
mode setting (enabling clocked WAIT states), which was
introduced in commit 83ae20981a
"ARM: imx: correct low-power mode setting", from
imx6q_clks_init to imx6q_pm_init. Now it is called
much later, after all cores are enabled.
This patch moves the low-power mode initialization back
to imx6q_clks_init again (and to imx6sl_clks_init).
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Pull CIFS fixes from Steve French:
"Small fix from Jeff for writepages leak, and some fixes for ACLs and
xattrs when SMB2 enabled.
Am expecting another fix from Jeff and at least one more fix (for
mounting SMB2 with cifsacl) in the next week"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] clean up page array when uncached write send fails
cifs: use a flexarray in cifs_writedata
retrieving CIFS ACLs when mounted with SMB2 fails dropping session
Add protocol specific operation for CIFS xattrs
Due to commit 88f718e3fa
"ARM: pxa: delete the custom GPIO header" some drivers fail
compilation, for example like this:
In file included from sound/soc/pxa/spitz.c:28:0:
sound/soc/pxa/spitz.c: In function ‘spitz_ext_control’:
arch/arm/mach-pxa/include/mach/spitz.h:111:30: error:
‘PXA_NR_BUILTIN_GPIO’ undeclared (first use in this function)
#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
(etc.)
This is caused by implicit inclusion of <mach/irqs.h> from
various board-specific headers under <mach/*> in the PXA
platform. So we take a sweep over these, and for every such
header that uses PXA_NR_BUILTIN_GPIO or PXA_GPIO_TO_IRQ()
we explicitly #include "irqs.h" so that we satisfy the
dependency in the board include file alone.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Kevin Hilman <khilman@linaro.org>
This board fails compilation like this:
arch/arm/mach-pxa/am300epd.c: In function ‘am300_cleanup’:
arch/arm/mach-pxa/am300epd.c:179:2: error: implicit declaration
of function ‘PXA_GPIO_TO_IRQ’ [-Werror=implicit-function-declaration]
free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
This was caused by commit 88f718e3fa
"ARM: pxa: delete the custom GPIO header"
This is because it was previously getting the macro PXA_GPIO_TO_IRQ
implicitly from <linux/gpio.h> which in turn implicitly included
<mach/gpio.h> which in turn included <mach/irqs.h>.
Add the missing include so that the board compiles again.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
- phy
- add support for optional phys via NULL
- ata
- fix boot hang due to probe failure of optional phys
NOTE: Series has been Ack'd by both the phy maintainer and the ata maintainer
for going through arm-soc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=TXSu
-----END PGP SIGNATURE-----
Merge tag 'mvebu-phy_ata-fixes-3.14' of git://git.infradead.org/linux-mvebu into fixes
From Jason Cooper:
mvebu phy and ata fixes for v3.14
- phy
- add support for optional phys via NULL
- ata
- fix boot hang due to probe failure of optional phys
NOTE: Series has been Ack'd by both the phy maintainer and the ata maintainer
for going through arm-soc
* tag 'mvebu-phy_ata-fixes-3.14' of git://git.infradead.org/linux-mvebu:
ata: sata_mv: Fix probe failures with optional phys
drivers: phy: Add support for optional phys
drivers: phy: Make NULL a valid phy reference
Signed-off-by: Kevin Hilman <khilman@linaro.org>
cppcheck detected following format string mismatch.
[blk-mq-tag.c:201]: (warning) %u in format string (no. 1) requires
'unsigned int' but the argument type is 'int'.
Change "cpu" from int to unsigned int, because the cpu
never become minus value.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Witch to using a preallocated flush_rq for blk-mq similar to what's done
with the old request path. This allows us to set up the request properly
with a tag from the actually allowed range and ->rq_disk as needed by
some drivers. To make life easier we also switch to dynamic allocation
of ->flush_rq for the old path.
This effectively reverts most of
"blk-mq: fix for flush deadlock"
and
"blk-mq: Don't reserve a tag for flush request"
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Use the block layer helpers for CPU-local completions instead of
reimplementing them locally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Make sure to complete requests on the submitting CPU. Previously this
was done in blk_mq_end_io, but the responsibility shifted to the drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Rework I/O completions to work more like the old code path. blk_mq_end_io
now stays out of the business of deferring completions to others CPUs
and calling blk_mark_rq_complete. The latter is very important to allow
completing requests that have timed out and thus are already marked completed,
the former allows using the IPI callout even for driver specific completions
instead of having to reimplement them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
After commit 202317a573 (ACPI / scan: Add acpi_device objects for
all device nodes in the namespace) acpi_bus_get_device() will always
return 0 for dock devices in dock_notify(), so the dock station
docking code under ACPI_NOTIFY_DEVICE_CHECK will never be executed
and docking will not work as a result of that.
Fix the problem by making dock_notify() use acpi_device_enumerated()
to check the presence of the device instead of checking the return
value of acpi_bus_get_device().
Fixes: 202317a573 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Even after the fix for leftover kconfig handling (commit f8f1becf),
the current code still doesn't handle properly the builtin/module
mixup case between the core snd-hda-codec and other codec drivers.
For example, when CONFIG_SND_HDA_INTEL=y and
CONFIG_SND_HDA_CODEC_HDMI=m, it'll end up with an unresolved symbol
snd_hda_parse_hdmi_codec. This patch fixes the issue.
Now codec->parser points to the parser object *only* when a module
(either generic or HDMI parser) is loaded and bound. When a builtin
symbol is used, codec->parser still points to NULL. This is the
difference from the previous versions.
Fixes: f8f1becfa4 ('ALSA: hda - Fix leftover ifdef checks after modularization')
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Correct a typo causing the stack protector to be left enabled.
0xFFFFFFF -> 0xFFFFFFFF
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Some drivers check if readq/writeq functions are defined.
If not internal driver functions are used which cause
compilation failures.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add missing param.h header because of HZ macro.
It is causing compilation failure:
In file included from include/linux/delay.h:14:0,
from drivers/clk/qcom/reset.c:18:
drivers/clk/qcom/reset.c: In function 'qcom_reset':
arch/microblaze/include/asm/delay.h:39:35: error: 'HZ'
undeclared (first use in this function)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
As far as I can tell we have used a default of 60 seconds for
FIN_WAIT2 timeout for ages (since 2.x times??).
In any case, the timeout these days is 60 seconds, so the 3 min
comment is wrong (and cost me a few minutes of my life when I was
debugging a FIN_WAIT2 related problem in a userspace application and
checked the kernel source for details).
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove occurrences of unused struct __vxge_hw_device pointer in functions
vxge_learn_mac() and vxge_rem_isr().
Detected by Coverity: CID 139839, CID 139842.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver description files give these descriptions to the vendor specific
ports on this modem:
VID_19D2&PID_1270&MI_00: "ZTE MF667 Diagnostics Port"
VID_19D2&PID_1270&MI_01: "ZTE MF667 AT Port"
VID_19D2&PID_1270&MI_02: "ZTE MF667 ATExt2 Port"
VID_19D2&PID_1270&MI_03: "ZTE MF667 ATExt Port"
VID_19D2&PID_1270&MI_04: "ZTE MF667 USB Modem"
VID_19D2&PID_1270&MI_05: "ZTE MF667 Network Adapter"
Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unused network device private data pointer 'vp' in function
vortex_eisa_cleanup(). Detected by Coverity: CID 139826.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip rules with iif/oif references do not update:
(detach/attach) across interface renames.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
CC: Willem de Bruijn <willemb@google.com>
CC: Eric Dumazet <edumazet@google.com>
CC: Chris Davis <chrismd@google.com>
CC: Carlo Contavalli <ccontavalli@google.com>
Google-Bug-Id: 12936021
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove occurrences of unused pointer to network device private data in
functions dlci_header() and dlci_receive().
Detected by Coverity: CID 139844, CID 139845.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8df8c56a (6lowpan: Moving generic compression code into 6lowpan_iphc.c)
left pointer 'hdr' unused - remove it.
Detected by Coverity: CID 1164868.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SELinux fixes from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
SELinux: Fix kernel BUG on empty security contexts.
selinux: add SOCK_DIAG_BY_FAMILY to the list of netlink message types
The patch 446fab5933 ("ipv6: enable anycast addresses
as source addresses in ICMPv6 error messages") causes an Oops when pinging a not
set up IPv6 peer on a sit tunnel.
The problem is that ipv6_anycast_destination() uses unconditionally skb_dst(skb),
which is NULL in this case.
The solution is to use instead the ipv6_chk_acast_addr_src() function.
Here are the steps to reproduce it:
modprobe sit
ip link add sit1 type sit remote 10.16.0.121 local 10.16.0.249
ip l s sit1 up
ip -6 a a dev sit1 2001🔢:123 remote 2001🔢:121
ping6 2001🔢:121
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull vfs fixes from Al Viro:
"A couple of fixes, both -stable fodder. The O_SYNC bug is fairly
old..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix a kmap leak in virtio_console
fix O_SYNC|O_APPEND syncing the wrong range on write()
Mark functions as static in net/sunrpc/svc_xprt.c because they are not
used outside this file.
This eliminates the following warning in net/sunrpc/svc_xprt.c:
net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include appropriate header file net/netfilter/nf_tables_core.h in
net/netfilter/nft_lookup.c because it has prototype declaration of
functions defined in net/netfilter/nft_lookup.c.
This eliminates the following warning in net/netfilter/nft_lookup.c:
net/netfilter/nft_lookup.c:133:12: warning: no previous prototype for ‘nft_lookup_module_init’ [-Wmissing-prototypes]
net/netfilter/nft_lookup.c:138:6: warning: no previous prototype for ‘nft_lookup_module_exit’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move prototype declaration of function to header file
include/net/net_namespace.h from net/ipx/af_ipx.c because they are used
by more than one file.
This eliminates the following warning in net/ipx/sysctl_net_ipx.c:
net/ipx/sysctl_net_ipx.c:33:6: warning: no previous prototype for ‘ipx_register_sysctl’ [-Wmissing-prototypes]
net/ipx/sysctl_net_ipx.c:38:6: warning: no previous prototype for ‘ipx_unregister_sysctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move prototype declarations of function to header file
include/net/datalink.h from net/ipx/af_ipx.c because they are used by
more than one file.
This eliminates the following warning in net/ipx/pe2.c:
net/ipx/pe2.c:20:24: warning: no previous prototype for ‘make_EII_client’ [-Wmissing-prototypes]
net/ipx/pe2.c:32:6: warning: no previous prototype for ‘destroy_EII_client’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move prototype declaration of functions to header file include/net/ipx.h
from net/ipx/af_ipx.c because they are used by more than one file.
This eliminates the following warning in
net/ipx/ipx_route.c:33:19: warning: no previous prototype for ‘ipxrtr_lookup’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:52:5: warning: no previous prototype for ‘ipxrtr_add_route’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:94:6: warning: no previous prototype for ‘ipxrtr_del_routes’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:149:5: warning: no previous prototype for ‘ipxrtr_route_skb’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:171:5: warning: no previous prototype for ‘ipxrtr_route_packet’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:261:5: warning: no previous prototype for ‘ipxrtr_ioctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move prototype definition of function to header file include/net/ipx.h
from net/ipx/ipx_route.c because they are used by more than one file.
This eliminates the following warning from net/ipx/af_ipx.c:
net/ipx/af_ipx.c:193:23: warning: no previous prototype for ‘ipxitf_find_using_net’ [-Wmissing-prototypes]
net/ipx/af_ipx.c:577:5: warning: no previous prototype for ‘ipxitf_send’ [-Wmissing-prototypes]
net/ipx/af_ipx.c:1219:8: warning: no previous prototype for ‘ipx_cksum’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move prototype declaration of functions to header file include/net/dn.h
from net/decnet/af_decnet.c because they are used by more than one file.
This eliminates the following warning in net/decnet/af_decnet.c:
net/decnet/sysctl_net_decnet.c:354:6: warning: no previous prototype for ‘dn_register_sysctl’ [-Wmissing-prototypes]
net/decnet/sysctl_net_decnet.c:359:6: warning: no previous prototype for ‘dn_unregister_sysctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move prototype declaration of functions to header file include/net/dn_route.h
from net/decnet/af_decnet.c because it is used by more than one file.
This eliminates the following warning in net/decnet/dn_route.c:
net/decnet/dn_route.c:629:5: warning: no previous prototype for ‘dn_route_rcv’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mark functions as static in core/dev.c because they are not used outside
this file.
This eliminates the following warning in core/dev.c:
net/core/dev.c:2806:5: warning: no previous prototype for ‘__dev_queue_xmit’ [-Wmissing-prototypes]
net/core/dev.c:4640:5: warning: no previous prototype for ‘netdev_adjacent_sysfs_add’ [-Wmissing-prototypes]
net/core/dev.c:4650:6: warning: no previous prototype for ‘netdev_adjacent_sysfs_del’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include appropriate header file net/caif/caif_dev.h in caif/cfsrvl.c
because it has prototype declaration of functions defined in
caif/cfsrvl.c.
This eliminates the following warning in caif/cfsrvl.c:
net/caif/cfsrvl.c:198:6: warning: no previous prototype for ‘caif_free_client’ [-Wmissing-prototypes]
net/caif/cfsrvl.c:208:6: warning: no previous prototype for ‘caif_client_register_refcnt’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include appropriate header file net/caif/caif_dev.h in caif/caif_dev.c
because it has prototype declarations of function defined in
caif/caif_dev.c.
This eliminates the following file in caif/caif_dev.c:
net/caif/caif_dev.c:303:6: warning: no previous prototype for ‘caif_enroll_dev’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mark function as static in net/9p/client.c because it is not used
outside this file.
This eliminates the following warning in net/9p/client.c:
net/9p/client.c:207:18: warning: no previous prototype for ‘p9_fcall_alloc’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
Please pull this batch of fixes intended for the 3.14 stream!
For the mac80211 bits, Johannes says:
"This is just a collection of small fixes, the commit logs explain the
details. The only thing that isn't strictly a fix is the 5/10 MHz
enabling, I had forgotten this and there's little point in waiting
longer. The patch simply removes the force-disable code that I put in
when there was a problem with the userspace API (that has long been
fixed.)"
For the iwlwifi bits, Emmanuel says:
"I have an important fix that disables A band in case the driver thought
it was enabled, and the firmware disagreed. We ended up making the
firmware unhappy. I also fix the station table in AP mode and fix the
scan while we have BT working.
Johannes removes a static variable that could potentially lead to to
issues on multi-device setups and disables scheduled scan to avoid
issues with old versions of wpa_supplicant.
A small fix from David on scan and a few new device IDs for 7265."
On top of that...
Oleksij Rempel adds a USB ID to the ar5523 driver and changes the
default powersave setting for ath9k_htc to "off", due to observed
stability issues (based on an equivalent ath9k patch).
Stanislaw Gruszka similarly disables powersave for a couple of rt2x00
drivers. He also fixes a couple of scheduling while atomic issues
in ath9k_htc.
Sujith Manoharan rounds-out the powersave disables with one for ath9k.
He also fixes a build prolem with ath9k on ARM and fixes an ath9k Tx
power calculation.
Finally, Andrea Merello fixes a couple of lingering DMA mapping
problems in the rtl8180 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/nftables/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes, mostly nftables
fixes, most relevantly they are:
* Fix a crash in the h323 conntrack NAT helper due to expectation list
corruption, from Alexey Dobriyan.
* A couple of RCU race fixes for conntrack, one manifests by hitting BUG_ON
in nf_nat_setup_info() and the destroy path, patches from Andrey Vagin and
me.
* Dump direction attribute in nft_ct only if it is set, from Arturo
Borrero.
* Fix IPVS bug in its own connection tracking system that may lead to
copying only 4 bytes of the IPv6 address when initializing the
ip_vs_conn object, from Michal Kubecek.
* Fix -EBUSY errors in nftables when deleting the rules, chain and tables
in a row due mixture of asynchronous and synchronous object releasing,
from me.
* Three fixes for the nf_tables set infrastructure when using intervals and
mappings, from me.
* Four patches to fixing the nf_tables log, reject and ct expressions from
the new inet table, from Patrick McHardy.
* Fix memory overrun in the map that is used to dynamically allocate names
from anonymous sets, also from Patrick.
* Fix a potential oops if you dump a set with NFPROTO_UNSPEC and a table
name, from Patrick McHardy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add prototype declaration to header file include/linux/bio.h because it
is used by more than one file.
This eliminates the following warning in bio-integrity.c:
fs/bio-integrity.c:214:14: warning: no previous prototype for ‘bio_integrity_tag_size’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
