Mediatek DRM Next for Linux 5.20
1. Add Mediatek Soc DRM (vdosys0) support for mt8195
2. Cooperate with DSI RX devices to modify dsi funcs and delay mipi high to cooperate with panel sequence
3. Add mt8186 dsi compatible and convert dsi_dtbinding to .yaml
4. Add MediaTek SoC DRM (vdosys1) support for mt8195
5. Add MT8195 dp_intf driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fix drm_edid.h include]
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220709142021.24260-1-chunkuang.hu@kernel.org
drm/tegra: Changes for v5.20-rc1
The bulk of these changes adds support for context isolation for the
various supported host1x engines, as well as support for the hardware
found on the new Tegra234 SoC generation.
There's also a couple of fixes and cleanups. To round things off, the
device tree bindings are converted to the new json-schema format that
allows DTBs to be validated.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708181136.673789-1-thierry.reding@gmail.com
In exynos7_decon_resume, When it fails, we must use clk_disable_unprepare()
to free resource that have been used.
Fixes: 6f83d20838 ("drm/exynos: use DRM_DEV_ERROR to print out error
message")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jian Zhang <zhangjian210@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Emails to Joonyoung Shim bounce ("550 5.1.1 Recipient address rejected:
User unknown"), so remove him from maintainers of DT bindings (display,
phy).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Emails to Joonyoung Shim bounce ("550 5.1.1 Recipient address rejected:
User unknown"), so move him to credits file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
* crtc: Remove unnessary include statements from drm_crtc.h, plus
fallout in drivers
* edid: More use of struct drm_edid; implement HF-EEODB extension
Driver Changes:
* bridge:
* anx7625: Implement HDP timeout via callback; Cleanups
* fsl-ldb: Drop DE flip; Modesetting fixes
* imx: Depend on ARCH_MXC
* sil8620: Fix off-by-one
* ti-sn65dsi86: Convert to atomic modesetting
* ingenic: Fix display at maximum resolution
* panel:
* simple: Add support for HannStar HSD101PWW2, plus DT bindings; Add
support for ETML0700Y5DHA, plus DT bindings
* rockchip: Fixes
* vc4: Cleanups
* vmwgfx: Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YsaHq1pvE699NtOM@linux-uq9g
This is a collection of three fixes for small annoyances.
Two of these are already pending in other trees, but I really don't want
to release another -rc with these issues pending, so I picked up the
patches for these things directly. We'll end up with duplicate commits
eventually, I prefer that over having these issues pending.
The third one is just me getting rid of another BUG_ON() just because it
was reported and I dislike those things so much.
* merge 'hot-fixes' branch:
ida: don't use BUG_ON() for debugging
drm/aperture: Run fbdev removal before internal helpers
ptrace: fix clearing of JOBCTL_TRACED in ptrace_unfreeze_traced()
This is another old BUG_ON() that just shouldn't exist (see also commit
a382f8fee4: "signal handling: don't use BUG_ON() for debugging").
In fact, as Matthew Wilcox points out, this condition shouldn't really
even result in a warning, since a negative id allocation result is just
a normal allocation failure:
"I wonder if we should even warn here -- sure, the caller is trying to
free something that wasn't allocated, but we don't warn for
kfree(NULL)"
and goes on to point out how that current error check is only causing
people to unnecessarily do their own index range checking before freeing
it.
This was noted by Itay Iellin, because the bluetooth HCI socket cookie
code does *not* do that range checking, and ends up just freeing the
error case too, triggering the BUG_ON().
The HCI code requires CAP_NET_RAW, and seems to just result in an ugly
splat, but there really is no reason to BUG_ON() here, and we have
generally striven for allocation models where it's always ok to just do
free(alloc());
even if the allocation were to fail for some random reason (usually
obviously that "random" reason being some resource limit).
Fixes: 88eca0207c ("ida: simplified functions for id allocation")
Reported-by: Itay Iellin <ieitayie@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for a reported problem that showed
up in 5.19-rc1 in the wlan-ng driver. It has been in linux-next for a
week with no reported problems"
* tag 'staging-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging/wlan-ng: get the correct struct hfa384x in work callback
Pull char/misc driver fixes from Greg KH:
"Here are four small char/misc driver fixes for 5.19-rc6 to resolve
some reported issues. They only affect two drivers:
- rtsx_usb: fix for of-reported DMA warning error, the driver was
handling memory buffers in odd ways, it has now been fixed up to be
much simpler and correct by Shuah.
- at25 eeprom driver bugfix for reported problem
All of these have been in linux-next for a week with no reported
problems"
* tag 'char-misc-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx_usb: set return value in rsp_buf alloc err path
misc: rtsx_usb: use separate command and response buffers
misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer
eeprom: at25: Rework buggy read splitting
Pull io_uring fix from Jens Axboe:
"A single fix for an issue that came up yesterday that we should plug
for -rc6.
This is a regression introduced in this cycle"
* tag 'io_uring-5.19-2022-07-09' of git://git.kernel.dk/linux-block:
io_uring: check that we have a file table when allocating update slots
Pull Kbuild fixes from Masahiro Yamada:
- Adjust gen_compile_commands.py to the format change of *.mod files
- Remove unused macro in scripts/Makefile.modinst
* tag 'kbuild-fixes-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove unused cmd_none in scripts/Makefile.modinst
gen_compile_commands: handle multiple lines per .mod file
Pull irq fixes from Borislav Petkov:
- Gracefully handle failure to request MMIO resources in the GICv3
driver
- Make a static key static in the Apple AIC driver
- Fix the Xilinx intc driver dependency on OF_ADDRESS
* tag 'irq_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/apple-aic: Make symbol 'use_fast_ipi' static
irqchip/xilinx: Add explicit dependency on OF_ADDRESS
irqchip/gicv3: Handle resource request failure consistently
Pull x86 fixes from Borislav Petkov:
- Prepare for and clear .brk early in order to address XenPV guests
failures where the hypervisor verifies page tables and uninitialized
data in that range leads to bogus failures in those checks
- Add any potential setup_data entries supplied at boot to the identity
pagetable mappings to prevent kexec kernel boot failures. Usually,
this is not a problem for the normal kernel as those mappings are
part of the initially mapped 2M pages but if kexec gets to allocate
the second kernel somewhere else, those setup_data entries need to be
mapped there too.
- Fix objtool not to discard text references from the __tracepoints
section so that ENDBR validation still works
- Correct the setup_data types limit as it is user-visible, before 5.19
releases
* tag 'x86_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix the setup data types max limit
x86/ibt, objtool: Don't discard text references from tracepoint section
x86/compressed/64: Add identity mappings for setup_data entries
x86: Fix .brk attribute in linker script
x86: Clear .brk area at early boot
x86/xen: Use clear_bss() for Xen PV guests
Commit 65ce9c3832 ("kbuild: move module strip/compression code into
scripts/Makefile.modinst") added this unused code.
Perhaps, I thought cmd_none was useful for CONFIG_MODULE_COMPRESS_NONE,
but I did not use it after all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Pull i2c fixes from Wolfram Sang:
"Two I2C driver bugfixes preventing resource leaks"
* tag 'i2c-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Unregister the clk notifier in error path
i2c: piix4: Fix a memory leak in the EFCH MMIO support
Always run fbdev removal first to remove simpledrm via sysfb_disable().
This clears the internal state.
The later call to drm_aperture_detach_drivers() then does nothing.
Otherwise, with drm_aperture_detach_drivers() running first, the call to
sysfb_disable() uses inconsistent state.
Example backtrace show below:
BUG: KASAN: use-after-free in device_del+0x79/0x5f0
Read of size 8 at addr ffff888108185050 by task systemd-udevd/311
CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G E 5.19.0-rc2-1-default+ #1689
Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011
Call Trace:
device_del+0x79/0x5f0
platform_device_del.part.0+0x19/0xe0
platform_device_unregister+0x1c/0x30
sysfb_disable+0x2d/0x70
remove_conflicting_framebuffers+0x1c/0xf0
remove_conflicting_pci_framebuffers+0x130/0x1a0
drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0
mgag200_pci_probe+0x2d/0x140 [mgag200]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 873eb3b118 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CI reported the following splat while running the strace testsuite:
WARNING: CPU: 1 PID: 3570031 at kernel/ptrace.c:272 ptrace_check_attach+0x12e/0x178
CPU: 1 PID: 3570031 Comm: strace Tainted: G OE 5.19.0-20220624.rc3.git0.ee819a77d4e7.300.fc36.s390x #1
Hardware name: IBM 3906 M04 704 (z/VM 7.1.0)
Call Trace:
[<00000000ab4b645a>] ptrace_check_attach+0x132/0x178
([<00000000ab4b6450>] ptrace_check_attach+0x128/0x178)
[<00000000ab4b6cde>] __s390x_sys_ptrace+0x86/0x160
[<00000000ac03fcec>] __do_syscall+0x1d4/0x200
[<00000000ac04e312>] system_call+0x82/0xb0
Last Breaking-Event-Address:
[<00000000ab4ea3c8>] wait_task_inactive+0x98/0x190
This is because JOBCTL_TRACED is set, but the task is not in TASK_TRACED
state. Caused by ptrace_unfreeze_traced() which does:
task->jobctl &= ~TASK_TRACED
but it should be:
task->jobctl &= ~JOBCTL_TRACED
Fixes: 31cae1eaae ("sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull powerpc fix from Michael Ellerman:
- On Power8 bare metal, fix creation of RNG platform devices, which are
needed for the /dev/hwrng driver to probe correctly.
Thanks to Jason A. Donenfeld, and Sachin Sant.
* tag 'powerpc-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: delay rng platform device creation until later in boot
If IORING_FILE_INDEX_ALLOC is set asking for an allocated slot, the
helper doesn't check if we actually have a file table or not. The non
alloc path does do that correctly, and returns -ENXIO if we haven't set
one up.
Do the same for the allocated path, avoiding a NULL pointer dereference
when trying to find a free bit.
Fixes: a7c41b4687 ("io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull fscache fixes from David Howells:
- Fix a check in fscache_wait_on_volume_collision() in which the
polarity is reversed. It should complain if a volume is still marked
acquisition-pending after 20s, but instead complains if the mark has
been cleared (ie. the condition has cleared).
Also switch an open-coded test of the ACQUIRE_PENDING volume flag to
use the helper function for consistency.
- Not a fix per se, but neaten the code by using a helper to check for
the DROPPED state.
- Fix cachefiles's support for erofs to only flush requests associated
with a released control file, not all requests.
- Fix a race between one process invalidating an object in the cache
and another process trying to look it up.
* tag 'fscache-fixes-20220708' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Fix invalidation/lookup race
cachefiles: narrow the scope of flushed requests when releasing fd
fscache: Introduce fscache_cookie_is_dropped()
fscache: Fix if condition in fscache_wait_on_volume_collision()
For some cases (accessing registers, unmap legacy queue), it needs
access mes in atomic context. Use spinlock to protect agaist mes
ring buffer race condition.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Output Data Mapping is a power saving feature that allows us to run at
reduced DPP and DISP clocks compared to what could be achieved with a
single pipe.
Set the default policy for single display use case to use 2 to 1 ODM combine.
The options are queried by DC and appropriate register programming sequence
is initiated to enable this feature.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add a missing callback to set DIG FIFO output pixel mode. This is used
when ODM combine is activated.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent regressions related to CPPC support.
Specifics:
- Prevent _CPC from being used if the platform firmware does not
confirm CPPC v2 support via _OSC (Mario Limonciello)
- Allow systems with X86_FEATURE_CPPC set to use _CPC even if CPPC
support cannot be agreed on via _OSC (Mario Limonciello)"
* tag 'acpi-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked
Pull power management fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in a devfreq driver and a runtime
PM framework issue that may cause a supplier device to be suspended
before its consumer.
Specifics:
- Fix NULL pointer dereference related to printing a diagnostic
message in the exynos-bus devfreq driver (Christian Marangi)
- Fix race condition in the runtime PM framework which in some cases
may cause a supplier device to be suspended when its consumer is
still active (Rafael Wysocki)"
* tag 'pm-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: exynos-bus: Fix NULL pointer dereference
PM: runtime: Fix supplier device management during consumer probe
PM: runtime: Redefine pm_runtime_release_supplier()
Pull iommu fixes from Joerg Roedel:
- fix device setup failures in the Intel VT-d driver when the PASID
table is shared
- fix Intel VT-d device hot-add failure due to wrong device notifier
order
- remove the old IOMMU mailing list from the MAINTAINERS file now that
it has been retired
* tag 'iommu-fixes-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Remove iommu@lists.linux-foundation.org
iommu/vt-d: Fix RID2PASID setup/teardown failure
iommu/vt-d: Fix PCI bus rescan device hot add
Pull gpio fixes from Bartosz Golaszewski:
- fix a build error in gpio-vf610
- fix a null-pointer dereference in the GPIO character device code
* tag 'gpio-fixes-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: fix null pointer dereference in linereq_free()
gpio: vf610: fix compilation error
Pull block fixes from Jens Axboe:
"NVMe pull request with another id quirk addition, and a tracing fix"
* tag 'block-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
Pull io_uring tweak from Jens Axboe:
"Just a minor tweak to an addition made in this release cycle: padding
a 32-bit value that's in a 64-bit union to avoid any potential
funkiness from that"
* tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
io_uring: explicit sqe padding for ioctl commands
Pull fbdev fixes from Helge Deller:
- fbcon now prevents switching to screen resolutions which are smaller
than the font size, and prevents enabling a font which is bigger than
the current screen resolution. This fixes vmalloc-out-of-bounds
accesses found by KASAN.
- Guiling Deng fixed a bug where the centered fbdev logo wasn't
displayed correctly if the screen size matched the logo size.
- Hsin-Yi Wang provided a patch to include errno.h to fix build when
CONFIG_OF isn't enabled.
* tag 'for-5.19/fbdev-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Use fbcon_info_from_console() in fbcon_modechange_possible()
fbmem: Check virtual screen sizes in fb_set_var()
fbcon: Prevent that screen size is smaller than font size
fbcon: Disallow setting font bigger than screen size
video: of_display_timing.h: include errno.h
fbdev: fbmem: Fix logo center image dx issue
Although all DSS belong to a single pool on Xe_HP platforms (i.e.,
they're not organized into slices from a topology point of view), we do
still need to pass 'group' and 'instance' targets when steering register
accesses to a specific instance of a per-DSS multicast register. The
rules for how to determine group and instance IDs (which previously used
legacy terms "slice" and "subslice") varies by platform. Some platforms
determine steering by gslice membership, some platforms by cslice
membership, and future platforms may have other rules.
Since looping over each DSS and performing steered unicast register
accesses is a relatively common pattern, let's add a dedicated iteration
macro to handle this (and replace the platform-specific "instdone" loop
we were using previously. This will avoid the calling code needing to
figure out the details about how to obtain steering IDs for a specific
DSS.
Most of the places where we use this new loop are in the GPU errorstate
code at the moment, but we do have some additional features coming in
the future that will also need to loop over each DSS and steer some
register accesses accordingly.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701232006.1016135-1-matthew.d.roper@intel.com
There are several things wrong here. First, none of these
numbers are FP, so there is no need to cast to double. Next
make sure to use proper 64 bit division helpers.
Fixes: 85f4bc0c33 ("drm/amd/display: Add SubVP required code")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately. Make the
code simpler without functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
While at it, remove a useless bitmap_zero() call. The bitmap is already
zero'ed when allocated.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
host1x_cdma_push_wide() had the assumptions that the last parameter word
was a NOP opcode, and that NOP opcodes could be used in all situations.
Neither are true with the new job opcode sequence, so adjust the
function to not have these assumptions, and instead place an early
RESTART opcode when necessary to jump back to the beginning of the
pushbuffer.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During the refactoring of channel_submit(), assignment of syncval was
moved but it is also used in channel_submit(). Add this assignment back
to channel_submit() as well.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
