If altname deletion of the short alternative name fails, the error
message printed is: "Failed to add short alternative name".
This is obviously a typo, as we are testing altname deletion.
Fix this using a proper error message.
Fixes: f95e6c9c46 ("selftest: net: add alternative names test")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
Add tests for invalid xsk descriptors in the Tx ring. A number of
handcrafted nasty invalid descriptors are created and submitted to the
tx ring to check that they are validated correctly. Corner case valid
ones are also sent. The tests are run for both aligned and unaligned
mode.
pkt_stream_set() is introduced to be able to create a hand-crafted
packet stream where every single packet is specified in detail.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-20-magnus.karlsson@gmail.com
Eliminate a test specific if-statement for the RX_FILL_EMTPY stats
test that is present in the test runner. We can do this as we now have
the use_addr_for_fill option. Just create and empty Rx packet stream
and indicated that the test runner should use the addresses in that to
populate the fill ring. As there are no packets in the stream, the
fill ring will be empty and we will get the error stats that we want
to test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-19-magnus.karlsson@gmail.com
Add a test for unaligned mode in which packet buffers can be placed
anywhere within the umem. Some packets are made to straddle page
boundaries in order to check for correctness. On the Tx side, buffers
are now allocated according to the addresses found in the packet
stream. Thus, the placement of buffers can be controlled with the
boolean use_addr_for_fill in the packet stream.
One new pkt_stream interface is introduced: pkt_stream_replace_half()
that replaces every other packet in the default packet stream with the
specified new packet. The constant DEFAULT_OFFSET is also
introduced. It specifies at what offset from the start of a chunk a Tx
packet is placed by the sending thread. This is just to be able to
test that it is possible to send packets at an offset not equal to
zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-18-magnus.karlsson@gmail.com
Introduce the concept of a default packet stream that is the set of
packets sent by most tests. Then add the ability to replace it for a
test that would like to send or receive something else through the use
of the function pkt_stream_replace() and then restored with
pkt_stream_restore_default(). These are then used to convert the
STAT_TEST_TX_INVALID to use these new APIs.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-17-magnus.karlsson@gmail.com
Make xdp_flags and bind_flags local instead of global by moving them
into the interface object. These flags decide if the socket should be
created in SKB mode or in DRV mode and therefore they are sticky and
will survive a test_spec_reset. Since every test is first run in SKB
mode then in DRV mode, this change only happens once. With this
change, the configured_mode global variable can also be
erradicated. The first test_spec_init() also becomes superfluous and
can be eliminated.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-13-magnus.karlsson@gmail.com
Replace the second_step global variable with a test specification
variable called total_steps that a test can be set to indicate how
many times the packet stream should be sent without reinitializing any
sockets. This eliminates test specific code in the test runner around
the bidirectional test.
The total_steps variable is 1 by default as most tests only need a
single round of packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-11-magnus.karlsson@gmail.com
Introduce a test specification to be able to concisely describe a
test. Currently, a test is implemented by sprinkling test specific if
statements here and there, which is not scalable or easy to
understand. The end goal with this patch set is to come to the point
in which a test is completely specified by a test specification that
can easily be constructed in a single function so that new tests can
be added without too much trouble. This test specification will be run
by a test runner that has no idea about tests. It just executes the
what test specification states.
This patch introduces the test specification and, as a start, puts the
two interface objects in there, one containing the packet stream to be
sent and the other one the packet stream that is supposed to be
received for a test to pass. The global variables containing these can
then be eliminated. The following patches will convert each existing
test into a test specification and add the needed fields into it and
the functionality in the test runner that act on the test
specification. At the end, the test runner should contain no test
specific code and each test should be described in a single simple
function.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-4-magnus.karlsson@gmail.com
Simplify the xsk_info and umem_info allocation by allocating them
upfront in an array, instead of allocating an array of pointers to
future creations of these. Allocating them upfront also has the
advantage that configuration information can be stored in these
structures instead of relying on global variables. With the previous
structure, xsk_info and umem_info were created too late to be able to
store most configuration information. This will be used to eliminate
most global variables in later patches in this series.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-2-magnus.karlsson@gmail.com
Introduce a macro LIBBPF_DEPRECATED_SINCE(major, minor, message) to prepare
the deprecation of two API functions. This macro marks functions as deprecated
when libbpf's version reaches the values passed as an argument.
As part of this change libbpf_version.h header is added with recorded major
(LIBBPF_MAJOR_VERSION) and minor (LIBBPF_MINOR_VERSION) libbpf version macros.
They are now part of libbpf public API and can be relied upon by user code.
libbpf_version.h is installed system-wide along other libbpf public headers.
Due to this new build-time auto-generated header, in-kernel applications
relying on libbpf (resolve_btfids, bpftool, bpf_preload) are updated to
include libbpf's output directory as part of a list of include search paths.
Better fix would be to use libbpf's make_install target to install public API
headers, but that clean up is left out as a future improvement. The build
changes were tested by building kernel (with KBUILD_OUTPUT and O= specified
explicitly), bpftool, libbpf, selftests/bpf, and resolve_btfids builds. No
problems were detected.
Note that because of the constraints of the C preprocessor we have to write
a few lines of macro magic for each version used to prepare deprecation (0.6
for now).
Also, use LIBBPF_DEPRECATED_SINCE() to schedule deprecation of
btf__get_from_id() and btf__load(), which are replaced by
btf__load_from_kernel_by_id() and btf__load_into_kernel(), respectively,
starting from future libbpf v0.6. This is part of libbpf 1.0 effort ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/278
Co-developed-by: Quentin Monnet <quentin@isovalent.com>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210908213226.1871016-1-andrii@kernel.org
Pull more tracing updates from Steven Rostedt:
- Add migrate-disable counter to tracing header
- Fix error handling in event probes
- Fix missed unlock in osnoise in error path
- Fix merge issue with tools/bootconfig
- Clean up bootconfig data when init memory is removed
- Fix bootconfig to loop only on subkeys
- Have kernel command lines override bootconfig options
- Increase field counts for synthetic events
- Have histograms dynamic allocate event elements to save space
- Fixes in testing and documentation
* tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/boot: Fix to loop on only subkeys
selftests/ftrace: Exclude "(fault)" in testing add/remove eprobe events
tracing: Dynamically allocate the per-elt hist_elt_data array
tracing: synth events: increase max fields count
tools/bootconfig: Show whole test command for each test case
bootconfig: Fix missing return check of xbc_node_compose_key function
tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
docs: bootconfig: Add how to use bootconfig for kernel parameters
init/bootconfig: Reorder init parameter from bootconfig and cmdline
init: bootconfig: Remove all bootconfig data when the init memory is removed
tracing/osnoise: Fix missed cpus_read_unlock() in start_per_cpu_kthreads()
tracing: Fix some alloc_event_probe() error handling bugs
tracing: Add migrate-disabled counter to tracing output.
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
The original test for adding and removing eprobes used synthetic events
and retrieved the filename from the open system call at the end of the
system call. This would allow it to always be loaded into the page tables
when accessed.
Masami suggested that the test was too complex for just testing add and
remove, so it was changed to test just adding and removing an event probe
on top of the start of the open system call event. Now it is possible that
the filename will not be loaded into memory at the time the eprobe is
triggered, and will result in "(fault)" being displayed in the event. This
causes the test to fail.
Account for "(fault)" also being one of the values of the filename field
of the event probe.
Link: https://lkml.kernel.org/r/20210907230429.5783d519@rorschach.local.home
Fixes: 079db70794 ("selftests/ftrace: Add test case to test adding and removing of event probe")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
bpf_prog_test_run_xattr takes a struct __sk_buff, but did not permit
that __skbuff to include an nonzero ingress_ifindex.
This patch updates to allow ingress_ifindex, convert the __sk_buff field to
sk_buff (skb_iif) and back, and tests that the value is present from on BPF
program side. The test sets an unlikely distinct value for ingress_ifindex
(11) from ifindex (1), which is in line with the rest of the synthetic field
tests.
Adding this support allows testing BPF that operates differently on
incoming and outgoing skbs by discriminating on this field.
Signed-off-by: Neil Spring <ntspring@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210831033356.1459316-1-ntspring@fb.com
Pull networking fixes and stragglers from Jakub Kicinski:
"Networking stragglers and fixes, including changes from netfilter,
wireless and can.
Current release - regressions:
- qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi
- ip_gre: validate csum_start only on pull
- bnxt_en: fix 64-bit doorbell operation on 32-bit kernels
- ionic: fix double use of queue-lock, fix a sleeping in atomic
- can: c_can: fix null-ptr-deref on ioctl()
- cs89x0: disable compile testing on powerpc
Current release - new code bugs:
- bridge: mcast: fix vlan port router deadlock, consistently disable
BH
Previous releases - regressions:
- dsa: tag_rtl4_a: fix egress tags, only port 0 was working
- mptcp: fix possible divide by zero
- netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
- netfilter: socket: icmp6: fix use-after-scope
- stmmac: fix MAC not working when system resume back with WoL active
Previous releases - always broken:
- ip/ip6_gre: use the same logic as SIT interfaces when computing
v6LL address
- seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6
- mptcp: only send extra TCP acks in eligible socket states
- dsa: lantiq_gswip: fix maximum frame length
- stmmac: fix overall budget calculation for rxtx_napi
- bnxt_en: fix firmware version reporting via devlink
- renesas: sh_eth: add missing barrier to fix freeing wrong tx
descriptor
Stragglers:
- netfilter: conntrack: switch to siphash
- netfilter: refuse insertion if chain has grown too large
- ncsi: add get MAC address command to get Intel i210 MAC address"
* tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
ieee802154: Remove redundant initialization of variable ret
net: stmmac: fix MAC not working when system resume back with WoL active
net: phylink: add suspend/resume support
net: renesas: sh_eth: Fix freeing wrong tx descriptor
bonding: 3ad: pass parameter bond_params by reference
cxgb3: fix oops on module removal
can: c_can: fix null-ptr-deref on ioctl()
can: rcar_canfd: add __maybe_unused annotation to silence warning
net: wwan: iosm: Unify IO accessors used in the driver
net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors
net: qcom/emac: Replace strlcpy with strscpy
ip6_gre: Revert "ip6_gre: add validation for csum_start"
net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static
selftests/bpf: Test XDP bonding nest and unwind
bonding: Fix negative jump label count on nested bonding
MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry
stmmac: dwmac-loongson:Fix missing return value
iwlwifi: fix printk format warnings in uefi.c
net: create netdev->dev_addr assignment helpers
bnxt_en: Fix possible unintended driver initiated error recovery
...
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
struct pt_regs is not exported to userspace on all archs. arm64 and s390
export "user_pt_regs" instead, which causes build failure at the moment:
progs/test_task_pt_regs.c:8:16: error: variable has incomplete type 'struct pt_regs'
struct pt_regs current_regs = {};
Instead of using pt_regs from ptrace.h, use the larger kernel struct
from vmlinux.h directly. Since the test runner task_pt_regs.c does not
have access to the kernel struct definition, copy it into a char array.
Fixes: 576d47bb1a ("bpf: selftests: Add bpf_task_pt_regs() selftest")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20210906163635.302307-1-jean-philippe@linaro.org
Modify the test to check that enslaving a bond slave with a XDP program
is now allowed.
Extend attach test to exercise the program unwinding in bond_xdp_set and
add a new test for loading XDP program on doubly nested bond device to
verify that static key incr/decr is correct.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM/arm64 updates for 5.15
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
Pull tracing updates from Steven Rostedt:
- simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig can now start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- introduce "event probes" that attach to other events and can retrieve
data from pointers of fields, or record fields as different types (a
pointer to a string as a string instead of just a hex number)
- various fixes and clean ups
* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
tracing/doc: Fix table format in histogram code
selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
selftests/ftrace: Add selftest for testing eprobe events on synthetic events
selftests/ftrace: Add test case to test adding and removing of event probe
selftests/ftrace: Fix requirement check of README file
selftests/ftrace: Add clear_dynamic_events() to test cases
tracing: Add a probe that attaches to trace events
tracing/probes: Reject events which have the same name of existing one
tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
tracing/probe: Change traceprobe_set_print_fmt() to take a type
tracing/probes: Use struct_size() instead of defining custom macros
tracing/probes: Allow for dot delimiter as well as slash for system names
tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
tracing: Have dynamic events have a ref counter
tracing: Add DYNAMIC flag for dynamic events
tracing: Replace deprecated CPU-hotplug functions.
MAINTAINERS: Add an entry for os noise/latency
tracepoint: Fix kerneldoc comments
bootconfig/tracing/ktest: Update ktest example for boot-time tracing
tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
...
Pull Kselftest updates from Shuah Khan:
"Fixes to build and test failures:
- openat2 test failure for O_LARGEFILE flag on ARM64
- x86 test build failures related to glibc 2.34 adding support for
variable sized MINSIGSTKSZ and SIGSTKSZ
- removing obsolete configs in sync and cpufreq config files
- minor spelling and duplicate header include cleanups"
* tag 'linux-kselftest-next-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/cpufreq: Rename DEBUG_PI_LIST to DEBUG_PLIST
selftests/sync: Remove the deprecated config SYNC
selftests: safesetid: Fix spelling mistake "cant" -> "can't"
selftests/x86: Fix error: variably modified 'altstack_data' at file scope
kselftest:sched: remove duplicate include in cs_prctl_test.c
selftests: openat2: Fix testing failure for O_LARGEFILE flag
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
Since merged pages are copied every time they need to be modified, the
write access time is different between shared and non-shared pages. Add
ksm_cow_time() function which evaluates latency of these COW breaks.
First, 4000 pages are allocated and the time, required to modify 1 byte in
every other page, is measured. After this, the pages are merged into 2000
pairs and in each pair, 1 page is modified (i.e. they are decoupled) to
detect COW breaks. The time needed to break COW of merged pages is then
compared with performance of non-shared pages.
The test is run as follows: ./ksm_tests -C
The output:
Total size: 15 MiB
Not merged pages:
Total time: 0.002185489 s
Average speed: 3202.945 MiB/s
Merged pages:
Total time: 0.004386872 s
Average speed: 1595.670 MiB/s
Link: https://lkml.kernel.org/r/1d03ee0d1b341959d4b61672c6401d498bff5652.1629386192.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When userfaultfd copy-ioctl fails since the PTE already exists, an -EEXIST
error is returned and the faulting thread is not woken. The current
userfaultfd test does not wake the faulting thread in such case. The
assumption is presumably that another thread set the PTE through copy/wp
ioctl and would wake the faulting thread or that alternatively the fault
handler would realize there is no need to "must_wait" and continue. This
is not necessarily true.
There is an assumption that the "must_wait" tests in handle_userfault()
are sufficient to provide definitive answer whether the offending PTE is
populated or not. However, userfaultfd_must_wait() test is lockless.
Consequently, concurrent calls to ptep_modify_prot_start(), for instance,
can clear the PTE and can cause userfaultfd_must_wait() to wrongly assume
it is not populated and a wait is needed.
There are therefore 3 options:
(1) Change the tests to wake on copy failure.
(2) Wake faulting thread unconditionally on zero/copy ioctls before
returning -EEXIST.
(3) Change the userfaultfd_must_wait() to hold locks.
This patch took the first approach, but the others are valid solutions
with different tradeoffs.
Link: https://lkml.kernel.org/r/20210808020724.1022515-4-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
