With VM_MEM_SRC_ANONYMOUS_THP specified in vm_userspace_mem_region_add(),
we have to get the transparent hugepage size for HVA alignment. With the
new helpers, we can use get_backing_src_pagesz() to check whether THP is
configured and then get the exact configured hugepage size.
As different architectures may have different THP page sizes configured,
this can get the accurate THP page sizes on any platform.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With VM_MEM_SRC_ANONYMOUS_HUGETLB, we currently can only use system
default hugetlb pages to back the testing guest memory. In order to
add flexibility, now list all the known hugetlb backing src types with
different page sizes, so that we can specify use of hugetlb pages of the
exact granularity that we want. And as all the known hugetlb page sizes
are listed, it's appropriate for all architectures.
Besides, the helper get_backing_src_pagesz() is added to get the
granularity of different backing src types(anonumous, thp, hugetlb).
Suggested-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-9-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If HUGETLB is configured in the host kernel, then we can know the system
default hugetlb page size through *cat /proc/meminfo*. Otherwise, we will
not see the information of hugetlb pages in file /proc/meminfo if it's not
configured. So add a helper to determine whether HUGETLB is configured and
then get the default page size by reading /proc/meminfo.
This helper can be useful when a program wants to use the default hugetlb
pages of the system and doesn't know the default page size.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-8-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we want to have some tests about transparent hugepages, the system
configured THP hugepage size should better be known by the tests, which
can be used for kinds of alignment or guest memory accessing of vcpus...
So it makes sense to add a helper to get the transparent hugepage size.
With VM_MEM_SRC_ANONYMOUS_THP specified in vm_userspace_mem_region_add(),
we now stat /sys/kernel/mm/transparent_hugepage to check whether THP is
configured in the host kernel before madvise(). Based on this, we can also
read file /sys/kernel/mm/transparent_hugepage/hpage_pmd_size to get THP
hugepage size.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-7-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bring some improvements/rationalization over the first version
of the vgic_init selftests:
- ucall_init is moved in run_cpu()
- vcpu_args_set is not called as not needed
- whenever a helper is supposed to succeed, call the non "_" version
- helpers do not return -errno, instead errno is checked by the caller
- vm_gic struct is used whenever possible, as well as vm_gic_destroy
- _kvm_create_device takes an addition fd parameter
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210407135937.533141-1-eric.auger@redhat.com
The tests exercise the VGIC_V3 device creation including the
associated KVM_DEV_ARM_VGIC_GRP_ADDR group attributes:
- KVM_VGIC_V3_ADDR_TYPE_DIST/REDIST
- KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION
Some other tests dedicate to KVM_DEV_ARM_VGIC_GRP_REDIST_REGS group
and especially the GICR_TYPER read. The goal was to test the case
recently fixed by commit 23bde34771
("KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace").
The API under test can be found at
Documentation/virt/kvm/devices/arm-vgic-v3.rst
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405163941.510258-10-eric.auger@redhat.com
hardware_disable_test produces 512 snippets like
...
main: [511] waiting semaphore
run_test: [511] start vcpus
run_test: [511] all threads launched
main: [511] waiting 368us
main: [511] killing child
and this doesn't have much value, let's print this info with pr_debug().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210323104331.1354800-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As in kvm_ioctl and _kvm_ioctl, add
the respective _vm_ioctl for vm_ioctl.
_vm_ioctl invokes an ioctl using the vm fd,
leaving the caller to test the result.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318151624.490861-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new selftest for Hyper-V clocksources (MSR-based reference TSC
and TSC page). As a starting point, test the following:
1) Reference TSC is 1Ghz clock.
2) Reference TSC and TSC page give the same reading.
3) TSC page gets updated upon KVM_SET_CLOCK call.
4) TSC page does not get updated when guest opted for reenlightenment.
5) Disabled TSC page doesn't get updated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318140949.1065740-1-vkuznets@redhat.com>
[Add a host-side test using TSC + KVM_GET_MSR too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vcpu mmap area may consist of more than just the kvm_run struct.
Allocate enough space for the entire vcpu mmap area. Without this, on
x86, the PIO page, for example, will be missing. This is problematic
when dealing with an unhandled exception from the guest as the exception
vector will be incorrectly reported as 0x0.
Message-Id: <20210210165035.3712489-1-aaronlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Co-developed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable in practice will never be uninitialized, because the
loop will always go through at least one iteration.
In case it would not, make vcpu_get_cpuid report an assertion
failure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Xen shinfo selftest uses '40' when setting the GPA of the vCPU info
struct, but checks for the result at '0x40'. Arbitrarily use the hex
version to resolve the bug.
Fixes: 8d4e7e8083 ("KVM: x86: declare Xen HVM shared info capability and add test case")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-4-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Building the KVM selftests with LLVM's integrated assembler fails with:
$ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang
lib/x86_64/svm.c:77:16: error: too few operands for instruction
asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory");
^
<inline asm>:1:2: note: instantiated into assembly here
vmsave
^
lib/x86_64/svm.c:134:3: error: too few operands for instruction
"vmload\n\t"
^
<inline asm>:1:2: note: instantiated into assembly here
vmload
^
This is because LLVM IAS does not currently support calling vmsave,
vmload, or vmload without an explicit %rax operand.
Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing
this was suggested by Sean Christopherson.
Tested: building without this error in clang 11. The following patch
(not queued yet) needs to be applied to solve the other remaining error:
"selftests: kvm: remove reassignment of non-absolute variables".
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/X+Df2oQczVBmwEzi@google.com/
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20210210031719.769837-1-ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V emulation is enabled in KVM unconditionally. This is bad at least
from security standpoint as it is an extra attack surface. Ideally, there
should be a per-VM capability explicitly enabled by VMM but currently it
is not the case and we can't mandate one without breaking backwards
compatibility. We can, however, check guest visible CPUIDs and only enable
Hyper-V emulation when "Hv#1" interface was exposed in
HYPERV_CPUID_INTERFACE.
Note, VMMs are free to act in any sequence they like, e.g. they can try
to set MSRs first and CPUIDs later so we still need to allow the host
to read/write Hyper-V specific MSRs unconditionally.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-14-vkuznets@redhat.com>
[Add selftest vcpu_set_hv_cpuid API to avoid breaking xen_vmcall_test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generally, when Hyper-V emulation is enabled, VMM is supposed to set
Hyper-V CPUID identifications so the guest knows that Hyper-V features
are available. evmcs_test doesn't currently do that but so far Hyper-V
emulation in KVM was enabled unconditionally. As we are about to change
that, proper Hyper-V CPUID identification should be set in selftests as
well.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the updated maximum number of user memslots (32)
set_memory_region_test sometimes takes longer than the default 45 seconds
to finish. Raise the value to an arbitrary 120 seconds.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210127175731.2020089-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of adding a plethora of new KVM_CAP_XEN_FOO capabilities, just
add bits to the return value of KVM_CAP_XEN_HVM.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Disambiguate Xen vs. Hyper-V calls by adding 'orl $0x80000000, %eax'
at the start of the Hyper-V hypercall page when Xen hypercalls are
also enabled.
That bit is reserved in the Hyper-V ABI, and those hypercall numbers
will never be used by Xen (because it does precisely the same trick).
Switch to using kvm_vcpu_write_guest() while we're at it, instead of
open-coding it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Add a new exit reason for emulator to handle Xen hypercalls.
Since this means KVM owns the ABI, dispense with the facility for the
VMM to provide its own copy of the hypercall pages; just fill them in
directly using VMCALL/VMMCALL as we do for the Hyper-V hypercall page.
This behaviour is enabled by a new INTERCEPT_HCALL flag in the
KVM_XEN_HVM_CONFIG ioctl structure, and advertised by the same flag
being returned from the KVM_CAP_XEN_HVM check.
Rename xen_hvm_config() to kvm_xen_write_hypercall_page() and move it
to the nascent xen.c while we're at it, and add a test case.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Commit 181f494888 ("KVM: x86: fix CPUID entries returned by
KVM_GET_CPUID2 ioctl") revealed that we're not testing KVM_GET_CPUID2
ioctl at all. Add a test for it and also check that from inside the guest
visible CPUIDs are equal to it's output.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210129161821.74635-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test will check the effect of various CPUID settings on the
MSR_IA32_PERF_CAPABILITIES MSR, check that whatever user space writes
with KVM_SET_MSR is _not_ modified from the guest and can be retrieved
with KVM_GET_MSR, and check that invalid LBR formats are rejected.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210201051039.255478-12-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a memslot modification stress test in which a memslot is repeatedly
created and removed while vCPUs access memory in another memslot. Most
userspaces do not create or remove memslots on running VMs which makes
it hard to test races in adding and removing memslots without a
dedicated test. Adding and removing a memslot also has the effect of
tearing down the entire paging structure, which leads to more page
faults and pressure on the page fault handling path than a one-and-done
memory population test.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to overlap the ranges of memory each vCPU accesses instead
of partitioning them. This option will increase the probability of
multiple vCPUs faulting on the same page at the same time, and causing
interesting races, if there are bugs in the page fault handler or
elsewhere in the kernel.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Makarand Sonare <makarandsonare@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu pointed out that a log message printed while waiting for the
memory population phase of the dirty_log_perf_test will flood the debug
logs as there is no delay after printing the message. Since the message
does not provide much value anyway, remove it.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a guest is using xAPIC KVM allocates a backing page for the required
EPT entry for the APIC access address set in the VMCS. If mm decides to
move that page the KVM mmu notifier will update the VMCS with the new
HPA. This test induces a page move to test that APIC access continues to
work correctly. It is a directed test for
commit e649b3f018 "KVM: x86: Fix APIC page invalidation race".
Tested: ran for 1 hour on a skylake, migrating backing page every 1ms
Depends on patch "selftests: kvm: Add exception handling to selftests"
from aaronlewis@google.com that has not yet been queued.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20201105223823.850068-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 updates for Linux 5.11
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
KVM: s390: Features and Test for 5.11
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
The selftest even triggers a non-critical bug that is unrelated
to diag318, fix will follow later.
Both user_msr_test and userspace_msr_exit_test tests the functionality
of kvm_msr_filter. Instead of testing this feature in two tests, merge
them together, so there is only one test for this feature.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201204172530.2958493-1-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
