Add custom implementation of getsockopt hook for TCP_ZEROCOPY_RECEIVE.
We skip generic hooks for TCP_ZEROCOPY_RECEIVE and have a custom
call in do_tcp_getsockopt using the on-stack data. This removes
3% overhead for locking/unlocking the socket.
Without this patch:
3.38% 0.07% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt
|
--3.30%--__cgroup_bpf_run_filter_getsockopt
|
--0.81%--__kmalloc
With the patch applied:
0.52% 0.12% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt_kern
Note, exporting uapi/tcp.h requires removing netinet/tcp.h
from test_progs.h because those headers have confliciting
definitions.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210115163501.805133-2-sdf@google.com
llvm patch https://reviews.llvm.org/D84002 permitted
to emit empty rodata datasec if the elf .rodata section
contains read-only data from local variables. These
local variables will be not emitted as BTF_KIND_VARs
since llvm converted these local variables as
static variables with private linkage without debuginfo
types. Such an empty rodata datasec will make
skeleton code generation easy since for skeleton
a rodata struct will be generated if there is a
.rodata elf section. The existence of a rodata
btf datasec is also consistent with the existence
of a rodata map created by libbpf.
The btf with such an empty rodata datasec will fail
in the kernel though as kernel will reject a datasec
with zero vlen and zero size. For example, for the below code,
int sys_enter(void *ctx)
{
int fmt[6] = {1, 2, 3, 4, 5, 6};
int dst[6];
bpf_probe_read(dst, sizeof(dst), fmt);
return 0;
}
We got the below btf (bpftool btf dump ./test.o):
[1] PTR '(anon)' type_id=0
[2] FUNC_PROTO '(anon)' ret_type_id=3 vlen=1
'ctx' type_id=1
[3] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[4] FUNC 'sys_enter' type_id=2 linkage=global
[5] INT 'char' size=1 bits_offset=0 nr_bits=8 encoding=SIGNED
[6] ARRAY '(anon)' type_id=5 index_type_id=7 nr_elems=4
[7] INT '__ARRAY_SIZE_TYPE__' size=4 bits_offset=0 nr_bits=32 encoding=(none)
[8] VAR '_license' type_id=6, linkage=global-alloc
[9] DATASEC '.rodata' size=0 vlen=0
[10] DATASEC 'license' size=0 vlen=1
type_id=8 offset=0 size=4
When loading the ./test.o to the kernel with bpftool,
we see the following error:
libbpf: Error loading BTF: Invalid argument(22)
libbpf: magic: 0xeb9f
...
[6] ARRAY (anon) type_id=5 index_type_id=7 nr_elems=4
[7] INT __ARRAY_SIZE_TYPE__ size=4 bits_offset=0 nr_bits=32 encoding=(none)
[8] VAR _license type_id=6 linkage=1
[9] DATASEC .rodata size=24 vlen=0 vlen == 0
libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
Basically, libbpf changed .rodata datasec size to 24 since elf .rodata
section size is 24. The kernel then rejected the BTF since vlen = 0.
Note that the above kernel verifier failure can be worked around with
changing local variable "fmt" to a static or global, optionally const, variable.
This patch permits a datasec with vlen = 0 in kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210119153519.3901963-1-yhs@fb.com
There are 3 tests added into verifier's jit tests to trigger x64
jit jump padding.
The first test can be represented as the following assembly code:
1: bpf_call bpf_get_prandom_u32
2: if r0 == 1 goto pc+128
3: if r0 == 2 goto pc+128
...
129: if r0 == 128 goto pc+128
130: goto pc+128
131: goto pc+127
...
256: goto pc+2
257: goto pc+1
258: r0 = 1
259: ret
We first store a random number to r0 and add the corresponding
conditional jumps (2~129) to make verifier believe that those jump
instructions from 130 to 257 are reachable. When the program is sent to
x64 jit, it starts to optimize out the NOP jumps backwards from 257.
Since there are 128 such jumps, the program easily reaches 15 passes and
triggers jump padding.
Here is the x64 jit code of the first test:
0: 0f 1f 44 00 00 nop DWORD PTR [rax+rax*1+0x0]
5: 66 90 xchg ax,ax
7: 55 push rbp
8: 48 89 e5 mov rbp,rsp
b: e8 4c 90 75 e3 call 0xffffffffe375905c
10: 48 83 f8 01 cmp rax,0x1
14: 0f 84 fe 04 00 00 je 0x518
1a: 48 83 f8 02 cmp rax,0x2
1e: 0f 84 f9 04 00 00 je 0x51d
...
f6: 48 83 f8 18 cmp rax,0x18
fa: 0f 84 8b 04 00 00 je 0x58b
100: 48 83 f8 19 cmp rax,0x19
104: 0f 84 86 04 00 00 je 0x590
10a: 48 83 f8 1a cmp rax,0x1a
10e: 0f 84 81 04 00 00 je 0x595
...
500: 0f 84 83 01 00 00 je 0x689
506: 48 81 f8 80 00 00 00 cmp rax,0x80
50d: 0f 84 76 01 00 00 je 0x689
513: e9 71 01 00 00 jmp 0x689
518: e9 6c 01 00 00 jmp 0x689
...
5fe: e9 86 00 00 00 jmp 0x689
603: e9 81 00 00 00 jmp 0x689
608: 0f 1f 00 nop DWORD PTR [rax]
60b: eb 7c jmp 0x689
60d: eb 7a jmp 0x689
...
683: eb 04 jmp 0x689
685: eb 02 jmp 0x689
687: 66 90 xchg ax,ax
689: b8 01 00 00 00 mov eax,0x1
68e: c9 leave
68f: c3 ret
As expected, a 3 bytes NOPs is inserted at 608 due to the transition
from imm32 jmp to imm8 jmp. A 2 bytes NOPs is also inserted at 687 to
replace a NOP jump.
The second test case is tricky. Here is the assembly code:
1: bpf_call bpf_get_prandom_u32
2: if r0 == 1 goto pc+2048
3: if r0 == 2 goto pc+2048
...
2049: if r0 == 2048 goto pc+2048
2050: goto pc+2048
2051: goto pc+16
2052: goto pc+15
...
2064: goto pc+3
2065: goto pc+2
2066: goto pc+1
...
[repeat "goto pc+16".."goto pc+1" 127 times]
...
4099: r0 = 2
4100: ret
There are 4 major parts of the program.
1) 1~2049: Those are instructions to make 2050~4098 reachable. Some of
them also could generate the padding for jmp_cond.
2) 2050: This is the target instruction for the imm32 nop jmp padding.
3) 2051~4098: The repeated "goto 1~16" instructions are designed to be
consumed by the nop jmp optimization. In the end, those
instrucitons become 128 continuous 0 offset jmp and are
optimized out in 1 pass, and this make insn 2050 an imm32
nop jmp in the next pass, so that we can trigger the
5 bytes padding.
4) 4099~4100: Those are the instructions to end the program.
The x64 jit code is like this:
0: 0f 1f 44 00 00 nop DWORD PTR [rax+rax*1+0x0]
5: 66 90 xchg ax,ax
7: 55 push rbp
8: 48 89 e5 mov rbp,rsp
b: e8 bc 7b d5 d3 call 0xffffffffd3d57bcc
10: 48 83 f8 01 cmp rax,0x1
14: 0f 84 7e 66 00 00 je 0x6698
1a: 48 83 f8 02 cmp rax,0x2
1e: 0f 84 74 66 00 00 je 0x6698
24: 48 83 f8 03 cmp rax,0x3
28: 0f 84 6a 66 00 00 je 0x6698
2e: 48 83 f8 04 cmp rax,0x4
32: 0f 84 60 66 00 00 je 0x6698
38: 48 83 f8 05 cmp rax,0x5
3c: 0f 84 56 66 00 00 je 0x6698
42: 48 83 f8 06 cmp rax,0x6
46: 0f 84 4c 66 00 00 je 0x6698
...
666c: 48 81 f8 fe 07 00 00 cmp rax,0x7fe
6673: 0f 1f 40 00 nop DWORD PTR [rax+0x0]
6677: 74 1f je 0x6698
6679: 48 81 f8 ff 07 00 00 cmp rax,0x7ff
6680: 0f 1f 40 00 nop DWORD PTR [rax+0x0]
6684: 74 12 je 0x6698
6686: 48 81 f8 00 08 00 00 cmp rax,0x800
668d: 0f 1f 40 00 nop DWORD PTR [rax+0x0]
6691: 74 05 je 0x6698
6693: 0f 1f 44 00 00 nop DWORD PTR [rax+rax*1+0x0]
6698: b8 02 00 00 00 mov eax,0x2
669d: c9 leave
669e: c3 ret
Since insn 2051~4098 are optimized out right before the padding pass,
there are several conditional jumps from the first part are replaced with
imm8 jmp_cond, and this triggers the 4 bytes padding, for example at
6673, 6680, and 668d. On the other hand, Insn 2050 is replaced with the
5 bytes nops at 6693.
The third test is to invoke the first and second tests as subprogs to test
bpf2bpf. Per the system log, there was one more jit happened with only
one pass and the same jit code was produced.
v4:
- Add the second test case which triggers jmp_cond padding and imm32 nop
jmp padding.
- Add the new test case as another subprog
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210119102501.511-4-glin@suse.com
Conflicts:
drivers/net/can/dev.c
commit 03f16c5075 ("can: dev: can_restart: fix use after free bug")
commit 3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
Code move.
drivers/net/dsa/b53/b53_common.c
commit 8e4052c32d ("net: dsa: b53: fix an off by one in checking "vlan->vid"")
commit b7a9e0da2d ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects")
Field rename.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The prog_test that's added depends on Clang/LLVM features added by
Yonghong in commit 286daafd6512 (was https://reviews.llvm.org/D72184).
Note the use of a define called ENABLE_ATOMICS_TESTS: this is used
to:
- Avoid breaking the build for people on old versions of Clang
- Avoid needing separate lists of test objects for no_alu32, where
atomics are not supported even if Clang has the feature.
The atomics_test.o BPF object is built unconditionally both for
test_progs and test_progs-no_alu32. For test_progs, if Clang supports
atomics, ENABLE_ATOMICS_TESTS is defined, so it includes the proper
test code. Otherwise, progs and global vars are defined anyway, as
stubs; this means that the skeleton user code still builds.
The atomics_test.o userspace object is built once and used for both
test_progs and test_progs-no_alu32. A variable called skip_tests is
defined in the BPF object's data section, which tells the userspace
object whether to skip the atomics test.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-11-jackmanb@google.com
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
Add a test to check that the verifier is able to recognize spilling of
PTR_TO_MEM registers, by reserving a ringbuf buffer, forcing the spill
of a pointer holding the buffer address to the stack, filling it back
in from the stack and writing to the memory area pointed by it.
The patch was partially contributed by CyberArk Software, Inc.
Signed-off-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210113053810.13518-2-gilad.reti@gmail.com
During an out-of-tree build, attempting to install the $(TEST_FILES)
into the $(OUTPUT) directory fails, because the objects were already
generated into $(OUTPUT):
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_lwt_ip_encap.o" failed: No such file or directory (2)
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_tc_edt.o" failed: No such file or directory (2)
Use $(TEST_GEN_FILES) instead.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210113163319.1516382-4-jean-philippe@linaro.org
If some of the subtests use module BTFs through ksyms, they will cause
bpf_prog to take a refcount on bpf_testmod module, which will prevent it from
successfully unloading. Module's refcnt is decremented when bpf_prog is freed,
which generally happens in RCU callback. So we need to trigger
syncronize_rcu() in the kernel, which can be achieved nicely with
membarrier(MEMBARRIER_CMD_SHARED) or membarrier(MEMBARRIER_CMD_GLOBAL) syscall.
So do that in kernel_sync_rcu() and make it available to other test inside the
test_progs. This synchronize_rcu() is called before attempting to unload
bpf_testmod.
Fixes: 9f7fa22589 ("selftests/bpf: Add bpf_testmod kernel module for testing")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-5-andrii@kernel.org
It was found in [1] that bpf_inode_storage_get helper did not check
the nullness of the passed owner ptr which caused an oops when
dereferenced. This change incorporates the example suggested in [1] into
the local storage selftest.
The test is updated to create a temporary directory instead of just
using a tempfile. In order to replicate the issue this copied rm binary
is renamed tiggering the inode_rename with a null pointer for the
new_inode. The logic to verify the setting and deletion of the inode
local storage of the old inode is also moved to this LSM hook.
The change also removes the copy_rm function and simply shells out
to copy files and recursively delete directories and consolidates the
logic of setting the initial inode storage to the bprm_committed_creds
hook and removes the file_open hook.
[1]: https://lore.kernel.org/bpf/CANaYP3HWkH91SN=wTNO9FL_2ztHfqcXKX38SSE-JJ2voh+vssw@mail.gmail.com
Suggested-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075525.256820-2-kpsingh@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf 2021-01-07
We've added 4 non-merge commits during the last 10 day(s) which contain
a total of 4 files changed, 14 insertions(+), 7 deletions(-).
The main changes are:
1) Fix task_iter bug caused by the merge conflict resolution, from Yonghong.
2) Fix resolve_btfids for multiple type hierarchies, from Jiri.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpftool: Fix compilation failure for net.o with older glibc
tools/resolve_btfids: Warn when having multiple IDs for single type
bpf: Fix a task_iter bug caused by a merge conflict resolution
selftests/bpf: Fix a compile error for BPF_F_BPRM_SECUREEXEC
====================
Link: https://lore.kernel.org/r/20210107221555.64959-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
When CONFIG_BPF_LSM is not configured, running bpf selftesting will show
BPF_F_BPRM_SECUREEXEC undefined error for bprm_opts.c.
The problem is that bprm_opts.c includes vmliunx.h. The vmlinux.h is
generated by "bpftool btf dump file ./vmlinux format c". On the other
hand, BPF_F_BPRM_SECUREEXEC is defined in include/uapi/linux/bpf.h
and used only in bpf_lsm.c. When CONFIG_BPF_LSM is not set, bpf_lsm
will not be compiled, so vmlinux.h will not include definition of
BPF_F_BPRM_SECUREEXEC.
Ideally, we want to compile bpf selftest regardless of the configuration
setting, so change the include file from vmlinux.h to bpf.h.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201224011242.585967-1-jiang.wang@bytedance.com
20b6cc34ea ("bpf: Avoid hashtab deadlock with map_locked") introduced
a possibility of getting EBUSY error on lock contention, which seems to happen
very deterministically in test_maps when running 1024 threads on low-CPU
machine. In libbpf CI case, it's a 2 CPU VM and it's hitting this 100% of the
time. Work around by retrying on EBUSY (and EAGAIN, while we are at it) after
a small sleep. sched_yield() is too agressive and fails even after 20 retries,
so I went with usleep(1) for backoff.
Also log actual error returned to make it easier to see what's going on.
Fixes: 20b6cc34ea ("bpf: Avoid hashtab deadlock with map_locked")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201223200652.3417075-1-andrii@kernel.org
Pull Kbuild updates from Masahiro Yamada:
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/kbuild: Document platform dependency practises
Documentation/kbuild: Document COMPILE_TEST dependencies
genksyms: Ignore module scoped _Static_assert()
modpost: turn static exports into error
modpost: turn section mismatches to error from fatal()
modpost: change license incompatibility to error() from fatal()
modpost: turn missing MODULE_LICENSE() into error
modpost: refactor error handling and clarify error/fatal difference
modpost: rename merror() to error()
kbuild: don't hardcode depmod path
kbuild: doc: document subdir-y syntax
kbuild: doc: clarify the difference between extra-y and always-y
kbuild: doc: split if_changed explanation to a separate section
kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
kbuild: doc: fix 'List directories to visit when descending' section
kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
kbuild: doc: update the description about kbuild Makefiles
Makefile.extrawarn: remove -Wnested-externs warning
tweewide: Fix most Shebang lines
If Makefile cannot find any of the vmlinux's in its VMLINUX_BTF_PATHS list,
it tries to run btftool incorrectly, with VMLINUX_BTF unset:
bpftool btf dump file $(VMLINUX_BTF) format c
Such that the keyword 'format' is misinterpreted as the path to vmlinux.
The resulting build error message is fairly cryptic:
GEN vmlinux.h
Error: failed to load BTF from format: No such file or directory
This patch makes the failure reason clearer by yielding this instead:
Makefile:...: *** Cannot find a vmlinux for VMLINUX_BTF at any of
"{paths}". Stop.
Fixes: acbd06206b ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201215182011.15755-1-kamal@canonical.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-12-14
1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.
2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.
3) Support for finding BTF based kernel attach targets through libbpf's
bpf_program__set_attach_target() API, from Andrii Nakryiko.
4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.
5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.
6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.
7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.
8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.
9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
KP Singh, Jiri Olsa and various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
bpf: Permits pointers on stack for helper calls
libbpf: Expose libbpf ring_buffer epoll_fd
selftests/bpf: Add set_attach_target() API selftest for module target
libbpf: Support modules in bpf_program__set_attach_target() API
selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
selftests/bpf: Drop the need for LLVM's llc
selftests/bpf: fix bpf_testmod.ko recompilation logic
samples/bpf: Fix possible hang in xdpsock with multiple threads
selftests/bpf: Make selftest compilation work on clang 11
selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
selftests/bpf: Drop tcp-{client,server}.py from Makefile
selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
selftests/bpf: Xsk selftests framework
bpf: Only provide bpf_sock_from_file with CONFIG_NET
bpf: Return -ENOTSUPP when attaching to non-kernel BTF
xsk: Validate socket state in xsk_recvmsg, prior touching socket members
...
====================
Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, ima_setup.sh spews outputs from commands like mkfs and dd
on the terminal without taking into account the verbosity level of
the test framework. Update test_progs to set the environment variable
SELFTESTS_VERBOSE=1 when a verbose output is requested. This
environment variable is then used by ima_setup.sh (and can be used by
other similar scripts) to obey the verbosity level of the test harness
without needing to re-implement command line options for verbosity.
In "silent" mode, the script saves the output to a temporary file, the
contents of which are echoed back to stderr when the script encounters
an error.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201211010711.3716917-1-kpsingh@kernel.org
LLC is meant for compiler development and debugging. Consequently, it
exposes many low level options about its backend. To avoid future bugs
introduced by using the raw LLC tool, use clang directly so that all
appropriate options are passed to the back end.
Additionally, simplify the Makefile by removing the
CLANG_NATIVE_BPF_BUILD_RULE as it is not being use, stop passing
dwarfris attr since elfutils/libdw now supports the bpf backend (which
should work with any recent pahole), and stop passing alu32 since
-mcpu=v3 implies alu32.
Signed-off-by: Andrew Delgadillo <adelg@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201211004344.3355074-1-adelg@google.com
bpf_testmod.ko build rule declared dependency on VMLINUX_BTF, but the variable
itself was initialized after the rule was declared, which often caused
bpf_testmod.ko to not be re-compiled. Fix by moving VMLINUX_BTF determination
sooner.
Also enforce bpf_testmod.ko recompilation when we detect that vmlinux image
changed by removing bpf_testmod/bpf_testmod.ko. This is necessary to generate
correct module's split BTF. Without it, Kbuild's module build logic might
determine that nothing changed on the kernel side and thus bpf_testmod.ko
shouldn't be rebuilt, so won't re-generate module BTF, which often leads to
module's BTF with wrong string offsets against vmlinux BTF. Removing .ko file
forces Kbuild to re-build the module.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 9f7fa22589 ("selftests/bpf: Add bpf_testmod kernel module for testing")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20201211015946.4062098-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier trace changed following a bugfix. After checking the 64-bit
sign, only the upper bit mask is known, not bit 31. Update the test
accordingly.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test fails because of a recent fix to the verifier, even though this
program is valid. In details what happens is:
7: (61) r1 = *(u32 *)(r0 +0)
Load a 32-bit value, with signed bounds [S32_MIN, S32_MAX]. The bounds
of the 64-bit value are [0, U32_MAX]...
8: (65) if r1 s> 0xffffffff goto pc+1
... therefore this is always true (the operand is sign-extended).
10: (b4) w2 = 11
11: (6d) if r2 s> r1 goto pc+1
When true, the 64-bit bounds become [0, 10]. The 32-bit bounds are still
[S32_MIN, 10].
13: (64) w1 <<= 2
Because this is a 32-bit operation, the verifier propagates the new
32-bit bounds to the 64-bit ones, and the knowledge gained from insn 11
is lost.
14: (0f) r0 += r1
15: (7a) *(u64 *)(r0 +0) = 4
Then the verifier considers r0 unbounded here, rejecting the test. To
make the test work, change insn 8 to check the sign of the 32-bit value.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After a 32-bit load followed by a branch, the verifier would reduce the
maximum bound of the register to 0x7fffffff, allowing a user to bypass
bound checks. Ensure such a program is rejected.
In the second test, the 64-bit compare should not sufficient to
determine whether the signed 32-bit lower bound is 0, so the verifier
should reject the second branch.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We can't compile test_core_reloc_module.c selftest with clang 11, compile
fails with:
CLNG-LLC [test_maps] test_core_reloc_module.o
progs/test_core_reloc_module.c:57:21: error: use of unknown builtin \
'__builtin_preserve_type_info' [-Wimplicit-function-declaration]
out->read_ctx_sz = bpf_core_type_size(struct bpf_testmod_test_read_ctx);
Skipping these tests if __builtin_preserve_type_info() is not supported
by compiler.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201209142912.99145-1-jolsa@kernel.org
