Random noise could be heard when playing audio to the HDMI output.
This is due to the IEC conversion is invoked in the external loop.
As a result, this additional loop takes up a lot of the processing
cycle.
hdmi_reformat_iec958() process the conversion using an internal loop,
it is safe to move it out from the external loop to avoid unnecessary
processing cycle been spent. Furthermore, ALSA IEC958 plugin works in
32bit format only.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210421005546.7534-1-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kabylake_ssp_fixup function uses snd_soc_dpcm to identify the
codecs DAIs. The HW parameters are changed based on the codec DAI of the
stream. The earlier approach to get snd_soc_dpcm was using container_of()
macro on snd_pcm_hw_params.
The structures have been modified over time and snd_soc_dpcm does not have
snd_pcm_hw_params as a reference but as a copy. This causes the current
driver to crash when used.
This patch changes the way snd_soc_dpcm is extracted. snd_soc_pcm_runtime
holds 2 dpcm instances (one for playback and one for capture). 2 codecs
on the SSP are dmic (capture) and speakers (playback). Based on the
stream direction, snd_soc_dpcm is extracted from snd_soc_pcm_runtime.
Tested for all use cases of the driver.
Based on similar fix in kbl_rt5663_rt5514_max98927.c
from Harsha Priya <harshapriya.n@intel.com> and
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415124347.475432-1-lma@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to have separate quirk-handlers / byt_machine_id-s
for these.
These are both cases of BYT devices with a 10EC5640 ACPI HID while using
a rt5672 codec.
The Dell Venue 10 Pro 5055 is another example of such a device, instead
of adding a third byt_machine_id definition for this Dell model, make
change the 2 existing cases into a generic BYT_RT5672 byt_machine_id
in preparation for adding a quirk for the Dell Venue 10 Pro 5055.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Chuwi Hi8 tablet is using an analog mic on IN1 and has its
jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
It also only has 1 speaker.
Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210325221054.22714-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SST firmware's media and deep-buffer inputs are hardcoded to
S16LE, the corresponding DAIs don't have a hw_params callback and
their prepare callback also does not take the format into account.
So far the advertising of non working S24LE support has not caused
issues because pulseaudio defaults to S16LE, but changing pulse-audio's
config to use S24LE will result in broken sound.
Pipewire is replacing pulse now and pipewire prefers S24LE over S16LE
when available, causing the problem of the broken S24LE support to
come to the surface now.
Cc: stable@vger.kernel.org
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/866
Fixes: 098c2cd281 ("ASoC: Intel: Atom: add 24-bit support for media playback and capture")
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210324132711.216152-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds jsl_rt5682_rt1015p which supports the RT5682 headset
codec and ALC1015Q-VB speaker amplifier combination on JasperLake
platform.
This driver also supports ALC1015Q-CG if running in auto-mode.
Following table shows the audio interface support of the two
amplifiers.
| ALC1015Q-CG | ALC1015Q-VB
=====================================
I2C | Yes | No
Auto-mode | 48K, 64fs | 16k, 32fs
| 48k, 32fs
| 48k, 64fs
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210317110824.20814-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on which AIF is used the UCM profile needs to setup
a different path through the rt5640's "Digital Mixer Path" graph.
ATM the UCM profiles solve this by just enabling paths to the outputs /
from the input from both AIF1 and AIF2 and then relying on the DAPM
framework to power-down the parts of the graph connected to the
unused AIF.
But in order to be able to use hardware-volumecontrol and to use
the hardware mute controls, which are necessary for mute LED control,
the UCM profiles need to know which AIF is actually being used.
Add a new "aif:1" or "aif:2" part to the component string to provide
info about the used AIF to userspace / to the UCM profiles.
Note the size of byt_rt5640_components is not increased because the
size of 32 chars already is big enough.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307150503.34906-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove two machine descriptors which were added for development on
Intel RVPs but are no longer used or productized. This will not have
any impact on end-users. The corresponding cleanup was applied in the
SOF topologies.
Pierre-Louis Bossart (2):
ASoC: Intel: soc-acpi: remove unused TGL table with rt5682 only
ASoC: Intel: soc-acpi: remove TGL RVP mixed SoundWire/TDM config
.../intel/common/soc-acpi-intel-tgl-match.c | 23 -------------------
1 file changed, 23 deletions(-)
--
2.25.1
v5.12-rc1 flags new warnings with make W=1, fix missing or broken
function descriptors.
sound/soc/intel/atom/sst/sst_loader.c:85: warning: expecting prototype
for sst_start_merrifield(). Prototype was for sst_start_mrfld()
instead
sound/soc/intel/atom/sst/sst_acpi.c:339: warning: expecting prototype
for intel_sst_remove(). Prototype was for sst_acpi_remove() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210301165349.114952-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When I added the quirk for the "HP Pavilion x2 10-p0XX" I copied the
byt_rt5640_quirk_table[] entry for the HP Pavilion x2 10-k0XX / 10-n0XX
models since these use almost the same settings.
While doing this I accidentally also copied and kept the non-standard
OVCD_TH_1500UA setting used on those models. This too low threshold is
causing headsets to often be seen as headphones (without a headset-mic)
and when correctly identified it is causing ghost play/pause
button-presses to get detected.
Correct the HP Pavilion x2 10-p0XX quirk to use the default OVCD_TH_2000UA
setting, fixing these problems.
Fixes: fbdae7d6d0 ("ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210224105052.42116-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.
Add a quirk for the mic and jack-detect settings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.
Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire machine drivers make a heavy use of component prefixes to
uniquify control names. This however results in errors when looking
for widgets or pins. This patchset suggests two solutions but feedback
or suggestions on how to take the prefix into account would be
welcome.
Bard Liao (1):
ASoC: Intel: boards: max98373: get dapm from cpu_dai
Shuming Fan (1):
ASoC: dapm: use component prefix when checking widget names
sound/soc/intel/boards/sof_maxim_common.c | 5 +++--
sound/soc/soc-dapm.c | 13 ++++++++++++-
2 files changed, 15 insertions(+), 3 deletions(-)
--
2.25.1
