Enable HDA Jack polling for the tegra platforms as Jack detection
logic doesn't work when the HDACODEC in runtime suspended state as
unsol event won't be triggered during D3 state. This will help the
userspace audio setting controls to correctly show available audio
devices in gui.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220411073210.23445-3-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDA Jack detection logic doesn't work when the HDACODEC
in runtime suspended state as unsol event won't be triggered
during D3 state. As pulseaudio server in userspace rely on the
jack mixer control status to show the audio devices in gui and
any display sink device hotplug event during D3 state will never
updates the jack status which will result in no audio device option
available in userspace settings.
The possible option available to resolve this issue is to run Jack
polling worker thread even after codec suspend state. The choice can
be made based on compromise between power saving or Jack detection in
suspend state.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220411073210.23445-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull sound fixes from Takashi Iwai:
"Just a few fixes that have been gathered since the previous pull:
- An additional fix for potential PCM deadlocks
- A series of HD-audio CS8409 codec patches for new models
- Other device specific fixes for HD-audio, ASoC mediatek, Intel,
fsl, rockchip"
* tag 'sound-fix-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
ALSA: hda: Avoid unsol event during RPM suspending
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
ALSA: hda/cs8409: Add new Dolphin HW variants
ALSA: hda/cs8409: Disable HSBIAS_SENSE_EN for Cyborg
ALSA: hda/cs8409: Support new Warlock MLK Variants
ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants
ALSA: hda/cs8409: Re-order quirk table into ascending order
ALSA: hda/cs8409: Fix Warlock to use mono mic configuration
ALSA: cs4236: fix an incorrect NULL check on list iterator
ALSA: hda/realtek: Enable headset mic on Lenovo P360
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
ALSA: hda/realtek: Add mute and micmut LED support for Zbook Fury 17 G9
ASoC: rockchip: i2s_tdm: Fixup config for SND_SOC_DAIFMT_DSP_A/B
ASoC: fsl-asoc-card: Fix jack_event() always return 0
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
There is a corner case with unsol event handling during codec runtime
suspending state. When the codec runtime suspend call initiated, the
codec->in_pm atomic variable would be 0, currently the codec runtime
suspend function calls snd_hdac_enter_pm() which will just increments
the codec->in_pm atomic variable. Consider unsol event happened just
after this step and before snd_hdac_leave_pm() in the codec runtime
suspend function. The snd_hdac_power_up_pm() in the unsol event
flow in hdmi_present_sense_via_verbs() function would just increment
the codec->in_pm atomic variable without calling pm_runtime_get_sync
function.
As codec runtime suspend flow is already in progress and in parallel
unsol event is also accessing the codec verbs, as soon as codec
suspend flow completes and clocks are switched off before completing
the unsol event handling as both functions doesn't wait for each other.
This will result in below errors
[ 589.428020] tegra-hda 3510000.hda: azx_get_response timeout, switching
to polling mode: last cmd=0x505f2f57
[ 589.428344] tegra-hda 3510000.hda: spurious response 0x80000074:0x5,
last cmd=0x505f2f57
[ 589.428547] tegra-hda 3510000.hda: spurious response 0x80000065:0x5,
last cmd=0x505f2f57
To avoid this, the unsol event flow should not perform any codec verb
related operations during RPM_SUSPENDING state.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220329155940.26331-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer <mccleetus@gmail.com>
Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
Commit 07bcab9394 ("ALSA: hda/realtek: Add support for HP Laptops")
breaks mute and micmute LEDs because it changed the LED quirk from
ALC285_FIXUP_HP_GPIO_LED to ALC245_FIXUP_HP_GPIO_LED, so change it back
here.
Also reorder the chain of quirks to ensure LED quirk is the last one
being applied.
Fixes: 07bcab9394 ("ALSA: hda/realtek: Add support for HP Laptops")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220317221134.566358-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra234 chip scratch register communication between audio
and hdmi driver differs slightly in the way it triggers the
interrupt compared to legacy chips. Interrupt is triggered
by writing non-zero values to verb 0xF80 instead of 31st bit
of scratch register.
DP MST support changed the NID to be used for scratch register
read/write from audio function group NID to Converter widget NID.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220216092240.26464-4-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GCAP register on Tegra234 implies no Input Streams(ISS)
supported, but the HW output stream descriptor programming
should start with offset 0x20*4 from base stream descriptor
address. This will be a problem while calculating the offset
for output stream descriptor which will be considering input
stream also. So here output stream starts with offset 0 which
is wrong as HW register for output stream offset starts with 4.
So hardcode the input stream numbers to 4 to avoid the issue
in offset calculation.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220216092240.26464-3-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add hda driver support for the Tegra234 chip. The hdacodec
on this chip now supports DP MST feature, HDA block contains
azalia controller and one hda-codec instance by supporting
4 independent output streams over DP MST mode. There is no
input stream support.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220216092240.26464-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With few changes, snd_hda_codec_register() and its
unregister-counterpart can be re-used by ASoC drivers. While at it,
provide kernel doc for the exposed functions.
Due to ALSA-device vs ASoC-component organization differences, new
'snddev_managed' argument is specified allowing for better control over
codec registration process.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220214101404.4074026-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement HDA keep alive (KAE) support for Intel display codecs. When no
audio stream is active, the display codec will provide a continuous clock
and a valid but silent audio stream to any connected HDMI/DP receiver.
Without this, upon starting a new playback stream, initial samples may be
lost as many receivers require time to initialize for new clock.
This is a new feature in Intel AlderLake-P display codec implementation
and replaces the Intel i915 silent-stream extension that has been used
on older hardware. Main benefit of the new method is that codec no longer
needs to be kept in D0 power state.
This patch depends on commit 112a87c48e ("drm/i915/display: program
audio CDCLK-TS for keepalives").
[ a minor coding-style fix by tiwai ]
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Jyri Sarha <jyri.sarha@intel.com>
Link: https://lore.kernel.org/r/20220216172405.3994959-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This branch contains 5.17-rc1 + the SPI tree's spi-acpi-helpers tag +
the other patches from the "[PATCH v6 0/9] Support Spi in
i2c-multi-instantiate driver" series.
The recently introduced coef_mutex for Realtek codec seems causing a
deadlock when the relevant code is invoked from the power-off state;
then the HD-audio core tries to power-up internally, and this kicks
off the codec runtime PM code that tries to take the same coef_mutex.
In order to avoid the deadlock, do the temporary power up/down around
the coef_mutex acquisition and release. This assures that the
power-up sequence runs before the mutex, hence no re-entrance will
happen.
Fixes: b837a9f5ab ("ALSA: hda: realtek: Fix race at concurrent COEF updates")
Reported-and-tested-by: Julian Wollrath <jwollrath@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220214132838.4db10fca@schienar
Link: https://lore.kernel.org/r/20220214130410.21230-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
