A couple of ibmvscsi files are missing the inclusion of linux/of.h
and linux/irqdomain.h, relying on transitive inclusion from another
file.
As we are about to break this dependency, make sure these dependencies
are explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered.
When this occurs during error handling, the current policy is to allow
error handling to continue, and the inevitable nexus ha reset will handle
the required reset.
However various steps of error handling need to taken before this happens.
These also involve some level of HW interaction, which will also fail with
various timeouts.
Speed up this process by recording a HW fault bit for an internal abort
timeout - when this is set, just automatically error any HW interaction,
and essentially go straight to clear nexus ha (to reset the controller).
Link: https://lore.kernel.org/r/1623058179-80434-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered. However if a timeout occurs
during SCSI error handling, issuing a controller reset immediately may
conflict with the error handling.
To handle internal abort in these two scenarios, only queue the reset when
not in an error handling function. In the case of a timeout during error
handling, do nothing and rely on the inevitable ha nexus reset to reset the
controller.
Link: https://lore.kernel.org/r/1623058179-80434-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qedi_clear_session_ctx() could race with the in-kernel or userspace driven
recovery/removal and we could access a NULL conn or do a double free.
We should be using iscsi_host_remove() to start the removal process from
the driver. It will start the in-kernel recovery and notify userspace that
the driver's scsi_hosts are being removed. iscsid will then drive the
session removal like is done when the logout command is run. When the
sessions are removed, iscsi_host_remove() will return so qedi can finish
knowing there are no running sessions and no new sessions will be allowed.
This also fixes an issue where we check for a NULL conn after already
accessing it introduced in commit 27e986289e ("scsi: iscsi: Drop suspend
calls from ep_disconnect") by just removing the function completely.
Link: https://lore.kernel.org/r/20210609192709.5094-1-michael.christie@oracle.com
Fixes: 27e986289e ("scsi: iscsi: Drop suspend calls from ep_disconnect")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pci_alloc_irq_vectors_affinity() function returns negative error codes
or it returns a number between the minimum vectors (1 in this case) and
max_vectors. It won't return zero. Because "i" is a u16 then the error
handling won't work. And also if it did work the error code was not set.
Really "max_vectors" can be an int as well because we're doing a min_t() on
int type. The other change is that it's better to remove unnecessary
initialization so that static checkers can warn us if there are ever
uninitialized variable bugs introduced in the future.
I changed the error code from -1 (-EPERM) if the kmalloc() failed to
-ENOMEM. And on success path I changed it from "return retval;" to "return
0;" which shouldn't affect the compiled code but makes it more readable.
Link: https://lore.kernel.org/r/YMCJcnmSI4kOIyv/@mwanda
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the query request, we already have query_trace, but in
ufshcd_send_command(), there will add two more redundant traces. Since
lrbp->cmd is NULL in the query request, the two trace events below provide
nothing except the tag and DB. Instead of letting them take up the limited
trace ring buffer, it’s better not to print these traces in case of cmd ==
NULL.
ufshcd_command: send_req: ff3b0000.ufs: tag: 28, DB: 0x0, size: -1, IS: 0, LBA: 18446744073709551615, opcode: 0x0 (0x0), group_id: 0x0
ufshcd_command: dev_complete: ff3b0000.ufs: tag: 28, DB: 0x0, size: -1, IS: 0, LBA: 18446744073709551615, opcode: 0x0 (0x0), group_id: 0x0
Link: https://lore.kernel.org/r/20210531104308.391842-4-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current UPIU completion event trace still prints the COMMAND UPIU
header, rather than the RSP UPIU header. This makes UPIU command trace
useless in problem shooting in case we receive a trace log from the
customer/field.
There are two important fields in RSP UPIU:
1. The response field, which indicates the UFS defined overall success or
failure of the series of Command, Data and RESPONSE UPIU’s that make up
the execution of a task.
2. The Status field, which contains the command set specific status for a
specific command issued by the initiator device.
Before this commit, the UPIU paired trace events:
ufshcd_upiu: send_req: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
ufshcd_upiu: complete_rsp: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
After this commit:
ufshcd_upiu: send_req: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
ufshcd_upiu: complete_rsp: fe3b0000.ufs: HDR:21 00 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
Link: https://lore.kernel.org/r/20210531104308.391842-3-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current UFS IRQ handler is completely wrapped by host lock, and because
ufshcd_send_command() is also protected by host lock, when IRQ handler
fires, not only the CPU running the IRQ handler cannot send new requests,
the rest CPUs can neither. Move the host lock wrapping the IRQ handler into
specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to further
reduce occpuation of host lock in ufshcd_transfer_req_compl(), host lock is
no longer required to call __ufshcd_transfer_req_compl(). As per test, the
optimization can bring considerable gain to random read/write performance.
Link: https://lore.kernel.org/r/1621845419-14194-3-git-send-email-cang@codeaurora.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When scsi_add_host_with_dma() returns failure, the caller will call
scsi_host_put(shost) to release everything allocated for this host
instance. Consequently we can't also free allocated stuff in
scsi_add_host_with_dma(), otherwise we will end up with a double free.
Strictly speaking, host resource allocations should have been done in
scsi_host_alloc(). However, the allocations may need information which is
not yet provided by the driver when that function is called. So leave the
allocations where they are but rely on host device's release handler to
free resources.
Link: https://lore.kernel.org/r/20210602133029.2864069-3-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"Five small and fairly minor fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-V
scsi: ufs: ufs-mediatek: Fix HCI version in some platforms
scsi: qedf: Do not put host in qedf_vport_create() unconditionally
scsi: lpfc: Fix failure to transmit ABTS on FC link
scsi: target: core: Fix warning on realtime kernels
Include Hannes' SCSI command result rework in the staging branch.
[mkp: remove DRIVER_SENSE from mpi3mr]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we got a response then we should always wake up the conn. For both the
cmd_cleanup_req == 0 or cmd_cleanup_req > 0, we shouldn't dig into
iscsi_itt_to_task because we don't know what the upper layers are doing.
We can also remove the qedi_clear_task_idx call here because once we signal
success libiscsi will loop over the affected commands and end up calling
the cleanup_task callout which will release it.
Link: https://lore.kernel.org/r/20210525181821.7617-29-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need to make sure that abort and reset completion work has completed
before ep_disconnect returns. After ep_disconnect we can't manipulate
cmds because libiscsi will call conn_stop and take onwership.
We are trying to make sure abort work and reset completion work has
completed before we do the cmd clean up in ep_disconnect. The problem is
that:
1. the work function sets the QEDI_CONN_FW_CLEANUP bit, so if the work was
still pending we would not see the bit set. We need to do this before
the work is queued.
2. If we had multiple works queued then we could break from the loop in
qedi_ep_disconnect early because when abort work 1 completes it could
clear QEDI_CONN_FW_CLEANUP. qedi_ep_disconnect could then see that
before work 2 has run.
3. A TMF reset completion work could run after ep_disconnect starts
cleaning up cmds via qedi_clearsq. ep_disconnect's call to qedi_clearsq
-> qedi_cleanup_all_io would might think it's done cleaning up cmds,
but the reset completion work could still be running. We then return
from ep_disconnect while still doing cleanup.
This replaces the bit with a counter to track the number of queued TMF
works, and adds a bool to prevent new works from starting from the
completion path once a ep_disconnect starts.
Link: https://lore.kernel.org/r/20210525181821.7617-28-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drivers shouldn't be calling block/unblock session for tmf handling because
the functions can change the session state from under libiscsi.
iscsi_queuecommand's call to iscsi_prep_scsi_cmd_pdu->
iscsi_check_tmf_restrictions will prevent new cmds from being sent to qedi
after we've started handling a TMF. So we don't need to try and block it in
the driver, and we can remove these block calls.
Link: https://lore.kernel.org/r/20210525181821.7617-25-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If qedi_tmf_work's qedi_wait_for_cleanup_request call times out we will
also force the clean up of the qedi_work_map but
qedi_process_cmd_cleanup_resp could still be accessing the qedi_cmd.
To fix this issue we extend where we hold the tmf_work_lock and back_lock
so the qedi_process_cmd_cleanup_resp access is serialized with the cleanup
done in qedi_tmf_work and any completion handling for the iscsi_task.
Link: https://lore.kernel.org/r/20210525181821.7617-22-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the SCSI cmd completes after qedi_tmf_work calls iscsi_itt_to_task then
the qedi qedi_cmd->task_id could be freed and used for another cmd. If we
then call qedi_iscsi_cleanup_task with that task_id we will be cleaning up
the wrong cmd.
Wait to release the task_id until the last put has been done on the
iscsi_task. Because libiscsi grabs a ref to the task when sending the
abort, we know that for the non-abort timeout case that the task_id we are
referencing is for the cmd that was supposed to be aborted.
A latter commit will fix the case where the abort times out while we are
running qedi_tmf_work.
Link: https://lore.kernel.org/r/20210525181821.7617-21-michael.christie@oracle.com
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
