leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,107,925 Commits 2 Branches 0 Tags
f7fbcf4637fe8f54acb18d88488ae901b3d7a4dc
Commit Graph

1891 Commits

Author SHA1 Message Date
Ping-Ke Shih
8372026846 rtw89: pci: reclaim TX BD only if it really need 
To reclaim TX BD, we need to read hardware reading index to determine if
any DMA is complete. Since this IO spends time, do this thing only if we
really need it when TX BD has no free buffer corresponding to target skb.

The experimental result shows that reading counter decreases from 26,000
to 130 per second.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-4-pkshih@realtek.com
 2022-04-24 14:30:34 +03:00
Ping-Ke Shih
e1757e8045 rtw89: pci: add variant RPWM/CPWM to enter low power mode 
RPWM/CPWM are registers that can set and check low power mode. Since chips
use different address, add a field to access them in common flow.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-3-pkshih@realtek.com
 2022-04-24 14:30:33 +03:00
Ping-Ke Shih
948e521c72 rtw89: pci: add variant IMR/ISR and configure functions 
8852CE uses different but similar IMR/ISR registers, and its masks are also
different in various states, so add config_intr_mask ops to configure masks
according to under_recovery or low_power states.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-2-pkshih@realtek.com
 2022-04-24 14:30:33 +03:00
Po-Hao Huang
9ebacb1e7e rtw88: pci: 8821c: Disable 21ce completion timeout 
Disable this capability to avoid timeout errors on certain platforms.
Without it, pci bus might stuck and leads to disconnection.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220420093058.31646-2-pkshih@realtek.com
 2022-04-23 15:46:53 +03:00
Po-Hao Huang
9cbdadf009 rtw88: fix uninitialized 'tim_offset' warning 
This avoids below warning and makes compiler happy.
error: uninitialized symbol 'tim_offset'

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220420093058.31646-1-pkshih@realtek.com
 2022-04-23 15:46:53 +03:00
Ping-Ke Shih
79dafcd4ff rtw89: 8852c: add help function of set channel 
During setting channel, we need to backup/restore and disable/enable some
settings. The settings include SCH (scheduler channel), PPDU status report,
and RF components, DFS and ADC.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-13-pkshih@realtek.com
 2022-04-23 15:44:51 +03:00
Ping-Ke Shih
1b00e9236a rtw89: 8852c: add set channel of BB part 
BB does many settings during setting channel. First is to configure CCK
for 2G channels, and then basic channel and bandwidth settings with a
encoded channel index that will report to driver when we receive packets.
Configure spur elimination to avoid spur of CSI and NBI tones in certain
frequencies. Also, it initializes BT grant to arrange path sharing with
BT according to band. Finally, reset TSSI and BB hardware to ensure it
stays in initial state.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-12-pkshih@realtek.com
 2022-04-23 15:44:51 +03:00
Ping-Ke Shih
63fb5c9815 rtw89: 8852c: set channel of MAC part 
Configure channel and bandwidth of MAC registers to work properly.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-11-pkshih@realtek.com
 2022-04-23 15:44:51 +03:00
Ping-Ke Shih
bb865ba6ea rtw89: 8852c: add set channel function of RF part 
Prepare functions to configure channel and bandwidth accordingly.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-10-pkshih@realtek.com
 2022-04-23 15:44:50 +03:00
Ping-Ke Shih
7b9c98c7a4 rtw89: 8852c: add HFC parameters 
HFC is short for HCI flow control, and these parameters is used to
configure PCI quota for TX/RX.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-9-pkshih@realtek.com
 2022-04-23 15:44:50 +03:00
Ping-Ke Shih
e6b17cbd34 rtw89: 8852c: add efuse gain offset parser 
Define efuse struct to access gain offset, and store them for further use
by setting channel.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-8-pkshih@realtek.com
 2022-04-23 15:44:50 +03:00
Zong-Zhe Yang
e885871ee8 rtw89: 8852c: support bb gain info 
Add parser for bb gain table and configure bb gain table for 8852c.
While ctrl_ch, obtain bb gain error settings and write them to phy.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-7-pkshih@realtek.com
 2022-04-23 15:44:50 +03:00
Ping-Ke Shih
cc99eefa61 rtw89: 8852c: add BB initial and reset functions 
chip_ops::bb_sethw is to initialize BB settings out of BB parameters
tables. Once switching channel or initialing, we do chip_ops::bb_reset to
reset hardware counters and states to make things in expectation.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-6-pkshih@realtek.com
 2022-04-23 15:44:50 +03:00
Ping-Ke Shih
c7845551bf rtw89: 8852c: phy: configure TSSI bandedge 
TSSI is used to manage TX power with thermal value as a factor. This patch
is to configure bandedge to TX proper waveform.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-5-pkshih@realtek.com
 2022-04-23 15:44:49 +03:00
Zong-Zhe Yang
c6badab206 rtw89: 8852c: add TX power track tables 
TX power track tables are used to do TX power compensation according to
thermal value. In order to work in existing and new chip, add new 6G
entries, and change type from u8 to s8.

Internal version table is HALRF_027_00_031.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-4-pkshih@realtek.com
 2022-04-23 15:44:49 +03:00
Ping-Ke Shih
342475ac51 rtw89: 8852c: add TX power by rate and limit tables 
TX power depends on rate, but must follow regulation for specific country.
Once asked to set channel, we configure registers according to these TX
power tables.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-3-pkshih@realtek.com
 2022-04-23 15:44:49 +03:00
Ping-Ke Shih
eefad995c2 rtw89: 8852c: add BB and RF parameters tables 
These parameters are used to initialize BB and RF hardware when we are
going to bring up interface and start to transmit and receive.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-2-pkshih@realtek.com
 2022-04-23 15:44:49 +03:00
Ping-Ke Shih
dc4246eff0 rtw89: pci: correct return value handling of rtw89_write16_mdio_mask() 
Fix wrong checking statement. Fortunately, this wrong code doesn't affect
existing chip.

Fixes: 740c431c22 ("rtw89: pci: add register definition to rtw89_pci_info to generalize pci code")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220413010804.8941-5-pkshih@realtek.com
 2022-04-13 09:26:52 +03:00
Ping-Ke Shih
0a6f299b67 rtw89: configure security CAM for V1 chip 
Add to configure security CAM while mac80211 calls set_key and del_key.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220413010804.8941-4-pkshih@realtek.com
 2022-04-13 09:26:52 +03:00
Ping-Ke Shih
04b5983ef7 rtw89: add new H2C to configure security CAM via DCTL for V1 chip 
DCTL is short for D-MAC control that V1 chip uses this H2C to configure
security CAM. Implement the callers in next patch.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220413010804.8941-3-pkshih@realtek.com
 2022-04-13 09:26:51 +03:00
Ping-Ke Shih
aa7f148bed rtw89: extend H2C of CMAC control info 
In order to support new chip that has capability of 160M, we need new
format to fill new information, so add a new V1 ID for newer use. Since
most fields are the same, fill fields according to the function ID of chip.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220413010804.8941-2-pkshih@realtek.com
 2022-04-13 09:26:51 +03:00
Lv Ruyi
780d9c48a0 rtlwifi: rtl8192cu: Fix spelling mistake "writting" -> "writing" 
There are some spelling mistakes in the comments. Fix it.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220411032458.2517551-1-lv.ruyi@zte.com.cn
 2022-04-12 16:56:12 +03:00
Lv Ruyi
e8c241d4a7 rtlwifi: Fix spelling mistake "cacluated" -> "calculated" 
There are some spelling mistakes in the comments. Fix it.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408095803.2495336-1-lv.ruyi@zte.com.cn
 2022-04-12 16:54:05 +03:00
Jimmy Hon
b9eb5f0742 rtw88: 8821ce: Disable PCIe ASPM L1 for 8821CE using chip ID 
Make workaround work for other 8821CE devices with different PCI ID

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407075123.420696-3-honyuenkwun@gmail.com
 2022-04-12 16:52:54 +03:00
Jimmy Hon
d528682620 rtw88: 8821ce: add support for device ID 0xb821 
New device ID 0xb821 found on TP-Link T2E
Tested it with c821 driver. 2.4GHz and 5GHz works.

PCI id:
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device b821
        Subsystem: Realtek Semiconductor Co., Ltd. Device b821

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407075123.420696-2-honyuenkwun@gmail.com
 2022-04-12 16:52:54 +03:00
Po-Hao Huang
ece31c93d4 rtw88: 8821c: fix debugfs rssi value 
RSSI value per frame is reported to mac80211 but not maintained in
our own statistics, add it back to help us debug.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407095858.46807-7-pkshih@realtek.com
 2022-04-12 16:52:06 +03:00
Ping-Ke Shih
f5207c1221 rtw88: do PHY calibration while starting AP 
Calling calibration to yield expected PHY performance. We do this in STA
mode, so do this in AP mode as well.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407095858.46807-6-pkshih@realtek.com
 2022-04-12 16:52:06 +03:00
Po-Hao Huang
f1c4dabfe6 rtw88: 8821c: Enable TX report for management frames 
Without this setting, hardware would not report to driver even if
management frames are transmitted successfully. So we fix it.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407095858.46807-5-pkshih@realtek.com
 2022-04-12 16:52:05 +03:00
Po-Hao Huang
f2217968ff rtw88: Add update beacon flow for AP mode 
To support stations in power saving mode, AP should notify stations
that there are frames buffered at the AP via TIM during beacons.
Driver used to transmit identical beacons that were downloaded to
hardware during the initiation phase. This beacon will become
obsolete over time.

If the beacon does not contain sufficient information, station would
not be able to percept that there is data to receive. Hence it won't
wake up and start the PS-poll procedure, this could lead to timeout
and/or lost data segments. In order to resolve this issue, driver will
now download beacon to hardware whenever the content is updated.

Enable hardware to update dtim_count for more efficiency, this reduces
the overhead of downloading beacon at every beacon interval since most
of the time only the dtim_count needs to be updated.

Change queue mapping for broadcast/multicast frames to high queue, so
these frames can be prioritized and sent when dtim_count is zero.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407095858.46807-4-pkshih@realtek.com
 2022-04-12 16:52:05 +03:00
Po-Hao Huang
6723c0cde8 rtw88: fix incorrect frequency reported 
We should only fill in frequency reported by firmware during scan.
Add this so frames won't be dropped by mac80211 due to frequency
mismatch.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407095858.46807-3-pkshih@realtek.com
 2022-04-12 16:52:05 +03:00
Po-Hao Huang
c1edc86472 rtw88: add ieee80211:sta_rc_update ops 
Adding this allows us to get notification when bitrate configuration
of the station changes. Update according parameters to firmware so
the rate control algorithm can work properly.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407095858.46807-2-pkshih@realtek.com
 2022-04-12 16:52:05 +03:00
Joe Perches
af5175acc8 rtw89: rtw89_ser: add const to struct state_ent and event_ent 
Change the struct and the uses to const to reduce data.

$ size drivers/net/wireless/realtek/rtw89/ser.o* (x86-64 defconfig w/ rtw89)
   text	   data	    bss	    dec	    hex	filename
   3741	      8	      0	   3749	    ea5	drivers/net/wireless/realtek/rtw89/ser.o.new
   3437	    312	      0	   3749	    ea5	drivers/net/wireless/realtek/rtw89/ser.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/2fd88e6119f62b968477ef9781abb1832d399fd6.camel@perches.com
 2022-04-12 16:37:49 +03:00
Chia-Yuan Li
065cf8f977 rtw89: 8852c: add 8852c specific BT-coexistence initial function 
Initialize registers to default values, such as PTA and GNT pin, and set
pin MUX according to number of antenna on hardware module.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-10-pkshih@realtek.com
 2022-04-12 16:34:39 +03:00
Johnson Lin
d264edb1cc rtw89: Skip useless dig gain and igi related settings for 8852C 
Separated DIG RX gain, IGI configurations from not supportted HW using
"support_igi" capability flag.

Signed-off-by: Johnson Lin <johnson.lin@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-9-pkshih@realtek.com
 2022-04-12 16:34:39 +03:00
Chia-Yuan Li
ec356ffb29 rtw89: 8852c: disable firmware watchdog if CPU disabled 
Disable watchdog timer to prevent it timeout suddenly.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-8-pkshih@realtek.com
 2022-04-12 16:34:39 +03:00
Ping-Ke Shih
1817519701 rtw89: reset BA CAM 
BA CAM is used to react receiving AMPDU packets, so reset them to be
expected initial state.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-7-pkshih@realtek.com
 2022-04-12 16:34:39 +03:00
Ping-Ke Shih
9a1ab283c7 rtw89: change station scheduler setting for hardware TX mode 
The bit B_AX_SS_NONEMPTY_SS2FINFO_EN should be clear, because we configure
C-MAC as hardware TX/RX mode.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-6-pkshih@realtek.com
 2022-04-12 16:34:38 +03:00
Ping-Ke Shih
9f405b0162 rtw89: ser: configure top ERR IMR for firmware to recover 
Turn on ERR IMR, and then firmware can capture interrupts reflecting
errors to recover hardware states.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-5-pkshih@realtek.com
 2022-04-12 16:34:38 +03:00
Chia-Yuan Li
d86369e937 rtw89: ser: configure C-MAC interrupt mask 
Similarly, create functions to set specific C-MAC masks for firmware
recovery.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-4-pkshih@realtek.com
 2022-04-12 16:34:38 +03:00
Chia-Yuan Li
eeadcd2a47 rtw89: ser: configure D-MAC interrupt mask 
These interrupts are used by firmware to recover hardware. Create
functions to set specific D-MAC masks to replace plain register settings.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-3-pkshih@realtek.com
 2022-04-12 16:34:38 +03:00
Zong-Zhe Yang
5ddfffd6da rtw89: ser: fix unannotated fall-through 
add `break` to fix warning of unannotated fall-through between switch
labels.

Fixes: 14f9f47900 ("rtw89: ser: control hci interrupts on/off by state")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-2-pkshih@realtek.com
 2022-04-12 16:34:38 +03:00
Sriram R
046d2e7c50 mac80211: prepare sta handling for MLO support 
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.

With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.

To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.

For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.

For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.

Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.

Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.

  @ieee80211_sta@
  struct ieee80211_sta *s;
  struct sta_info *si;
  identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
  @@

  (
    s->
  -    var
  +    deflink.var
  |
   si->sta.
  -    var
  +    deflink.var
  )

  @sta_info@
  struct sta_info *si;
  identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
  @@

  (
    si->
  -    var
  +    deflink.var
  )

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 2022-04-11 16:42:03 +02:00
Chris Chiu
bd917b3d28 rtl8xxxu: fill up txrate info for gen1 chips 
RTL8188CUS/RTL8192CU(gen1) don't support rate adaptive report hence
no real txrate info can be retrieved. The vendor driver reports the
highest rate in HT capabilities from the IEs to avoid empty txrate.
This commit initiates the txrate information with the highest supported
rate negotiated with AP. The gen2 chip keeps update the txrate from
the rate adaptive reports, and gen1 chips at least have non-NULL txrate
after associated.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325035735.4745-3-chris.chiu@canonical.com
 2022-04-06 15:12:47 +03:00
Chris Chiu
21338c5bde rtl8xxxu: feed antenna information for cfg80211 
Fill up the available TX/RX antenna so the iw commands can show
correct antenna information for different chips.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325035735.4745-2-chris.chiu@canonical.com
 2022-04-06 15:12:47 +03:00
Jakob Koschel
a0ff2a8719 rtlwifi: replace usage of found with dedicated list iterator variable 
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.

To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].

This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220324072124.62458-1-jakobkoschel@gmail.com
 2022-04-06 15:11:58 +03:00
Po Hao Huang
65ee4971a2 rtw89: fix misconfiguration on hw_scan channel time 
Without this patch, hw scan won't stay long enough on DFS/passive
channels. Found previous logic error and fix it.

Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220401055043.12512-5-pkshih@realtek.com
 2022-04-06 11:56:33 +03:00
Ching-Te Ku
841f263384 rtw89: coex: Add case for scan offload 
Turn off coexistence driver control, let firmware can control the
traffic during scan. This prevents potential unexpected behavior of
the BT driver.

Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220401055043.12512-4-pkshih@realtek.com
 2022-04-06 11:56:33 +03:00
Po Hao Huang
2b8219e9b7 rtw89: packet offload handler to avoid warning 
Add a dummy function for packet offload to eliminate warning message
"c2h class 1 func 2 not support". This c2h is for debug purpose and
its presence itself can do the work, so further parsing won't be
required for now.

Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220401055043.12512-3-pkshih@realtek.com
 2022-04-06 11:56:33 +03:00
Po Hao Huang
ee20d538c4 rtw89: change idle mode condition during hw_scan 
Previously we only consider single interface's status, idle mode
behavior could be unexpected when multiple interfaces is active.
Change to enter/leave idle mode by mac80211's configuration state.

Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220401055043.12512-2-pkshih@realtek.com
 2022-04-06 11:56:33 +03:00
Ping-Ke Shih
9fb4862e91 rtw89: update ptcl_init 
ptcl_init, standing for protocol initialization, is updated to the latest
version.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325060055.58482-17-pkshih@realtek.com
 2022-04-06 11:55:15 +03:00