When search for a peer lag device we can filter based on that
device's capabilities.
Downstream patch will be less strict when filtering compatible devices
and remove the limitation where we require exact MLX5_MAX_PORTS and
change it to a range.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use a lag specific lock instead of depending on external locks to
synchronise the lag creation/destruction.
With this, taking E-Switch mode lock is no longer needed for syncing
lag logic.
Cleanup any dead code that is left over and don't export functions that
aren't used outside the E-Switch core code.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is no need to expose E-Switch function for something that can be
checked with already present API inside lag code.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Devcom API is intended to be used between 2 devices only add this
implied assumption into the code and check when it's no true.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Downstream patches will add support for hardware lag with
more than 2 ports. Add a way for users to query the number of lag ports.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, health recovery will reload driver to recover it from fatal
errors. During the driver's load process, it would wait for FW to set the
pre-init bit for up to 120 seconds, beyond this threshold it would abort
the load process. In some cases, such as a FW upgrade on the DPU, this
timeout period is insufficient, and the user has no way to recover the
host device.
To solve this issue, introduce a new FW pre-init timeout for health
recovery, which is set to 2 hours.
The timeout for devlink reload and probe will use the original one because
they are user triggered flows, and therefore should not have a
significantly long timeout, during which the user command would hang.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, removing a device needs to get the driver interface lock before
doing any cleanup. If the driver is waiting in a loop for FW init, there
is no way to cancel the wait, instead the device cleanup waits for the
loop to conclude and release the lock.
To allow immediate response to remove device commands, check the TEARDOWN
flag while waiting for FW init, and exit the loop if it has been set.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Historically the nfp driver has supported NFP chips with Netronome's
PCIE vendor ID. This patch extends the driver to also support NFP
chips, which at this point are assumed to be otherwise identical from
a software perspective, that have Corigine's PCIE vendor ID (0x1da8).
Also, Rename the macro definitions PCI_DEVICE_ID_NERTONEOME_NFPXXXX
to PCI_DEVICE_ID_NFPXXXX, as they are now used in conjunction with two
PCIE vendor IDs.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Historically the nfp driver has supported NFP chips with Netronome's
PCIE vendor ID. In preparation for extending the to also support NFP
chips that have Corigine's PCIE vendor ID (0x1da8) make printk statements
relating to the chip vendor neutral.
An alternate approach is to set the string based on the PCI vendor ID.
In our judgement this proved to cumbersome so we have taken this simpler
approach.
Update strings relating to the driver to use Corigine, who have taken
over maintenance of the driver.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-05-06
This series contains updates to ice driver only.
Ivan Vecera fixes a race with aux plug/unplug by delaying setting adev
until initialization is complete and adding locking.
Anatolii ensures VF queues are completely disabled before attempting to
reconfigure them.
Michal ensures stale Tx timestamps are cleared from hardware.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix PTP stale Tx timestamps cleanup
ice: clear stale Tx queue settings before configuring
ice: Fix race during aux device (un)plugging
====================
Link: https://lore.kernel.org/r/20220506174129.4976-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-05-06
Marcin Szycik says:
This patchset adds support for systemd defined naming scheme for port
representors, as well as re-enables displaying PCI bus-info in ethtool.
bus-info information has previously been removed from ethtool for port
representors, as a workaround for a bug in lshw tool, where the tool would
sometimes display wrong descriptions for port representors/PF. Now the bug
has been fixed in lshw tool [1].
Removing the workaround can be considered a regression (user might be
running an older, unpatched version of lshw) (see [2] for discussion).
However, calling SET_NETDEV_DEV also produces the same effect as removing
the workaround, i.e. lshw is able to access PCI bus-info (this time not
via ethtool, but in some other way) and the bug can occur.
Adding SET_NETDEV_DEV is important, as it greatly improves netdev naming -
- port representors are named based on PF name. Currently port representors
are named "ethX", which might be confusing, especially when spawning VFs on
multiple PFs. Furthermore, it's currently harder to determine to which PF
does a particular port representor belong, as bus-info is not shown in
ethtool.
Consider the following three cases:
Case 1: current code - driver workaround in place, no SET_NETDEV_DEV,
lshw with or without fix. Port representors are not displayed because they
don't have bus-info (the workaround), PFs are labelled correctly:
$ sudo ./lshw -c net -businfo
Bus info Device Class Description
========================================================
pci@0000:02:00.0 ens6f0 network Ethernet Controller E810-XXV for SFP <-- PF
pci@0000:02:00.1 ens6f1 network Ethernet Controller E810-XXV for SFP
pci@0000:02:01.0 ens6f0v0 network Ethernet Adaptive Virtual Function <-- VF
pci@0000:02:01.1 ens6f0v1 network Ethernet Adaptive Virtual Function
...
Case 2: driver workaround in place, SET_NETDEV_DEV, no lshw fix. Port
representors have predictable names. lshw is able to get bus-info because
of SET_NETDEV_DEV and netdevs CAN be mislabelled:
$ sudo ./lshw -c net -businfo
Bus info Device Class Description
=============================================================
pci@0000:02:00.0 ens6f0npf0vf60 network Ethernet Controller E810-XXV for SFP <-- mislabeled port representor
pci@0000:02:00.1 ens6f1 network Ethernet Controller E810-XXV for SFP
pci@0000:02:01.0 ens6f0v0 network Ethernet Adaptive Virtual Function
pci@0000:02:01.1 ens6f0v1 network Ethernet Adaptive Virtual Function
...
pci@0000:02:00.0 ens6f0npf0vf26 network Ethernet interface
pci@0000:02:00.0 ens6f0 network Ethernet interface <-- mislabeled PF
pci@0000:02:00.0 ens6f0npf0vf81 network Ethernet interface
...
$ sudo ethtool -i ens6f0npf0vf60
driver: ice
...
bus-info:
...
Output of lshw would be the same with workaround removed; it does not
change the fact that lshw labels netdevs incorrectly, while at the same
time it prevents ethtool from displaying potentially useful data
(bus-info).
Case 3: workaround removed, SET_NETDEV_DEV, lshw fix:
$ sudo ./lshw -c net -businfo
Bus info Device Class Description
=============================================================
pci@0000:02:00.0 ens6f0npf0vf73 network Ethernet Controller E810-XXV for SFP
pci@0000:02:00.1 ens6f1 network Ethernet Controller E810-XXV for SFP
pci@0000:02:01.0 ens6f0v0 network Ethernet Adaptive Virtual Function
pci@0000:02:01.1 ens6f0v1 network Ethernet Adaptive Virtual Function
...
pci@0000:02:00.0 ens6f0npf0vf5 network Ethernet Controller E810-XXV for SFP
pci@0000:02:00.0 ens6f0 network Ethernet Controller E810-XXV for SFP
pci@0000:02:00.0 ens6f0npf0vf60 network Ethernet Controller E810-XXV for SFP
...
$ sudo ethtool -i ens6f0npf0vf73
driver: ice
...
bus-info: 0000:02:00.0
...
In this case poort representors have predictable names, netdevs are not
mislabelled in lshw, and bus-info is shown in ethtool.
[1] https://ezix.org/src/pkg/lshw/commit/9bf4e4c9c1
[2] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20220321144731.3935-1-marcin.szycik@linux.intel.com
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
Revert "ice: Hide bus-info in ethtool for PRs in switchdev mode"
ice: link representors to PCI device
====================
Link: https://lore.kernel.org/r/20220506180052.5256-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The argument rss_ind_tbl_size is type u16 in function definition of
hclge_comm_get_rss_indir_tbl(), but it is set to type __le16 in function
declaration by mistake, so fix it.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new mailbox opcode to query map relation between
vf ring and vector.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses __le16/__32 to define mailbox data structures. Then byte
order conversion are added for mailbox messages from VF to PF.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, hns3 mailbox processing between PF and VF missed to convert
message byte order and use data type u16 instead of __le16 for mailbox
data process. These processes may cause problems between different
architectures.
So this patch uses __le16/__le32 data type to define mailbox data
structures. To be compatible with old hns3 driver, these structures use
one-byte alignment. Then byte order conversions are added to mailbox
messages from PF to VF.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vector0 is used for common interrupt control events and is
irrelevant to performance. Currently, the driver sets the
default affinity of vector0 to NUMA nodes, which is unnecessary.
Therefore, the default setting is removed, and the driver does
not set the affinity for vector0.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When set tx-buf-size as 0 by ethtool, hns3_init_tx_spare_buffer()
will return directly and priv->ring->tx_spare->len is uninitialized,
then print function access priv->ring->tx_spare->len will cause
this issue.
When set tx-buf-size as 0 by ethtool, the print function will
print 0 directly and not access priv->ring->tx_spare->len.
Fixes: 2373b35c24 ("net: hns3: add log for setting tx spare buf size")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It fixes memory leak in ring buffer change logic.
When ring buffer size is changed(ethtool -G eth0 rx 4096), sfc driver
works like below.
1. stop all channels and remove ring buffers.
2. allocates new buffer array.
3. allocates rx buffers.
4. start channels.
While the above steps are working, it skips some steps if the channel
doesn't have a ->copy callback function.
Due to ptp channel doesn't have ->copy callback, these above steps are
skipped for ptp channel.
It eventually makes some problems.
a. ptp channel's ring buffer size is not changed, it works only
1024(default).
b. memory leak.
The reason for memory leak is to use the wrong ring buffer values.
There are some values, which is related to ring buffer size.
a. efx->rxq_entries
- This is global value of rx queue size.
b. rx_queue->ptr_mask
- used for access ring buffer as circular ring.
- roundup_pow_of_two(efx->rxq_entries) - 1
c. rx_queue->max_fill
- efx->rxq_entries - EFX_RXD_HEAD_ROOM
These all values should be based on ring buffer size consistently.
But ptp channel's values are not.
a. efx->rxq_entries
- This is global(for sfc) value, always new ring buffer size.
b. rx_queue->ptr_mask
- This is always 1023(default).
c. rx_queue->max_fill
- This is new ring buffer size - EFX_RXD_HEAD_ROOM.
Let's assume we set 4096 for rx ring buffer,
normal channel ptp channel
efx->rxq_entries 4096 4096
rx_queue->ptr_mask 4095 1023
rx_queue->max_fill 4086 4086
sfc driver allocates rx ring buffers based on these values.
When it allocates ptp channel's ring buffer, 4086 ring buffers are
allocated then, these buffers are attached to the allocated array.
But ptp channel's ring buffer array size is still 1024(default)
and ptr_mask is still 1023 too.
So, 3062 ring buffers will be overwritten to the array.
This is the reason for memory leak.
Test commands:
ethtool -G <interface name> rx 4096
while :
do
ip link set <interface name> up
ip link set <interface name> down
done
In order to avoid this problem, it adds ->copy callback to ptp channel
type.
So that rx_queue->ptr_mask value will be updated correctly.
Fixes: 7c236c43b8 ("sfc: Add support for IEEE-1588 PTP")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For notifications that the router needs to handle, router lock is taken.
Further, at least to determine whether an event is related to a tunnel
underlay, router lock also needs to be taken. Due to this, the router lock
is always taken for each unhandled event, and also for some handled events,
even if they are not related to underlay. Thus each event implies at least
one router lock, sometimes two.
Instead of deferring the locking to the leaf handlers, take the lock in the
router notifier handler always. This simplifies thinking about the locking
state, and in some cases saves one lock cycle.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The position of netdevice notifier registration no longer depends on the
router initialization, because the event handler no longer dispatches to
the router code. Update the comment at the registration to that effect.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The events related to IPIP tunnels are handled by the router code. Move the
handling from the central dispatcher in spectrum.c to the new notifier
handler in the router module.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The events NETDEV_PRE_CHANGEADDR, NETDEV_CHANGEADDR and NETDEV_CHANGEMTU
have implications for in-ASIC router interface objects, and as such are
handled in the router module. Move the handling from the central dispatcher
in spectrum.c to the new notifier handler in the router module.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
L3 HW stats are implemented in mlxsw as RIF counters, and therefore the
code resides in spectrum_router. Exclude the offload xstats events from the
mlxsw_sp_netdevice_event_is_router() predicate, and instead recreate the
glue code in the router module.
Previously, the order of dispatch was that for events on tunnels, a
dedicated handler was called, which however did not handle HW stats events.
But there is nothing special about tunnel devices as far as HW stats: there
is a RIF associated with the tunnel netdevice, and that RIF is where the
counter should be installed. Therefore now, HW stats events are tested
first, independent of netdevice type. The upshot is that as of this commit,
mlxsw supports L3 HW stats work on GRE tunnels.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Events involving VRF, as L3 concern, are handled in the router code, by the
helper mlxsw_sp_netdevice_vrf_event(). The handler is currently invoked
from the centralized dispatcher in spectrum.c. Instead, move the call to
the newly-introduced router-specific notifier handler.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all netdevice events are handled in the centralized notifier
handler maintained by spectrum.c. Since a number of events are involving
router code, spectrum.c needs to dispatch them to spectrum_router.c. The
spectrum module therefore needs to know more about the router code than it
should have, and there is are several API points through which the two
modules communicate.
To simplify the notifier handlers, introduce a new notifier into the router
module.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enslaving netdevices to VRF is currently handled through an
mlxsw_sp_is_vrf_event() conditional in mlxsw_sp_netdevice_event(). In the
following patch sets, VRF enslavement will be handled purely in the router
code. Therefore make handlers of NETDEV_PRECHANGEUPPER tolerant of
enslaving to VRF, so that they do not bounce the change.
For NETDEV_CHANGEUPPER, drop the WARN_ON(1) and bounce from
mlxsw_sp_netdevice_port_vlan_event(). This is the only handler that warned
and bounces even in the CHANGEUPPER code, other handler quietly do nothing
when they encounter an unfamiliar upper.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch all Ethernet drivers which use custom napi weights
to the new API.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The felix driver is the only user of dsa_port_walk_mdbs(), and there
isn't even a good reason for it, considering that the host MDB entries
are already saved by the ocelot switch lib in the ocelot->multicast list.
Rewrite the multicast entry migration procedure around the
ocelot->multicast list so we can delete dsa_port_walk_mdbs().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch increases the polling rate used by the
mlxbf_gige driver on the MDIO bus. The previous
polling rate was every 100us, and the new rate is
every 5us. With this change the amount of time
spent waiting for the MDIO BUSY signal to de-assert
drops from ~100us to ~27us for each operation.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20220505162309.20050-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using min_t(int, ...) as a potential array index implies to the compiler
that negative offsets should be allowed. This is not the case, though.
Replace "int" with "unsigned int". Fixes the following warning exposed
under future CONFIG_FORTIFY_SOURCE improvements:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:11,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/rcupdate.h:29,
from include/linux/rculist.h:11,
from include/linux/pid.h:5,
from include/linux/sched.h:14,
from include/linux/delay.h:23,
from drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:35:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function 't4_get_raw_vpd_params':
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 29 and size [2147483648, 4294967295] [-Warray-bounds]
46 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
388 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2796:9: note: in expansion of macro 'memcpy'
2796 | memcpy(p->id, vpd + id, min_t(int, id_len, ID_LEN));
| ^~~~~~
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 0 and size [2147483648, 4294967295] [-Warray-bounds]
46 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
388 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2798:9: note: in expansion of macro 'memcpy'
2798 | memcpy(p->sn, vpd + sn, min_t(int, sn_len, SERNUM_LEN));
| ^~~~~~
Additionally remove needless cast from u8[] to char * in last strim()
call.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202205031926.FVP7epJM-lkp@intel.com
Fixes: fc9279298e ("cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()")
Fixes: 24c521f81c ("cxgb4: Use pci_vpd_find_id_string() to find VPD ID string")
Cc: Raju Rangoju <rajur@chelsio.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220505233101.1224230-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
10GbE Intel Wired LAN Driver Updates 2022-05-05
This series contains updates to ixgbe and igb drivers.
Jeff Daly adjusts type for 'allow_unsupported_sfp' to match the
associated struct value for ixgbe.
Alaa Mohamed converts, deprecated, kmap() call to kmap_local_page() for
igb.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igb: Convert kmap() to kmap_local_page()
ixgbe: Fix module_param allow_unsupported_sfp type
====================
Link: https://lore.kernel.org/r/20220505155651.2606195-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read stale PTP Tx timestamps from PHY on cleanup.
After running out of Tx timestamps request handlers, hardware (HW) stops
reporting finished requests. Function ice_ptp_tx_tstamp_cleanup() used
to only clean up stale handlers in driver and was leaving the hardware
registers not read. Not reading stale PTP Tx timestamps prevents next
interrupts from arriving and makes timestamping unusable.
Fixes: ea9b847cda ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The iAVF driver uses 3 virtchnl op codes to communicate with the PF
regarding the VF Tx queues:
* VIRTCHNL_OP_CONFIG_VSI_QUEUES configures the hardware and firmware
logic for the Tx queues
* VIRTCHNL_OP_ENABLE_QUEUES configures the queue interrupts
* VIRTCHNL_OP_DISABLE_QUEUES disables the queue interrupts and Tx rings.
There is a bug in the iAVF driver due to the race condition between VF
reset request and shutdown being executed in parallel. This leads to a
break in logic and VIRTCHNL_OP_DISABLE_QUEUES is not being sent.
If this occurs, the PF driver never cleans up the Tx queues. This results
in leaving behind stale Tx queue settings in the hardware and firmware.
The most obvious outcome is that upon the next
VIRTCHNL_OP_CONFIG_VSI_QUEUES, the PF will fail to program the Tx
scheduler node due to a lack of space.
We need to protect ICE driver against such situation.
To fix this, make sure we clear existing stale settings out when
handling VIRTCHNL_OP_CONFIG_VSI_QUEUES. This ensures we remove the
previous settings.
Calling ice_vf_vsi_dis_single_txq should be safe as it will do nothing if
the queue is not configured. The function already handles the case when the
Tx queue is not currently configured and exits with a 0 return in that
case.
Fixes: 7ad15440ac ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Function ice_plug_aux_dev() assigns pf->adev field too early prior
aux device initialization and on other side ice_unplug_aux_dev()
starts aux device deinit and at the end assigns NULL to pf->adev.
This is wrong because pf->adev should always be non-NULL only when
aux device is fully initialized and ready. This wrong order causes
a crash when ice_send_event_to_aux() call occurs because that function
depends on non-NULL value of pf->adev and does not assume that
aux device is half-initialized or half-destroyed.
After order correction the race window is tiny but it is still there,
as Leon mentioned and manipulation with pf->adev needs to be protected
by mutex.
Fix (un-)plugging functions so pf->adev field is set after aux device
init and prior aux device destroy and protect pf->adev assignment by
new mutex. This mutex is also held during ice_send_event_to_aux()
call to ensure that aux device is valid during that call.
Note that device lock used ice_send_event_to_aux() needs to be kept
to avoid race with aux drv unload.
Reproducer:
cycle=1
while :;do
echo "#### Cycle: $cycle"
ip link set ens7f0 mtu 9000
ip link add bond0 type bond mode 1 miimon 100
ip link set bond0 up
ifenslave bond0 ens7f0
ip link set bond0 mtu 9000
ethtool -L ens7f0 combined 1
ip link del bond0
ip link set ens7f0 mtu 1500
sleep 1
let cycle++
done
In short when the device is added/removed to/from bond the aux device
is unplugged/plugged. When MTU of the device is changed an event is
sent to aux device asynchronously. This can race with (un)plugging
operation and because pf->adev is set too early (plug) or too late
(unplug) the function ice_send_event_to_aux() can touch uninitialized
or destroyed fields. In the case of crash below pf->adev->dev.mutex.
Crash:
[ 53.372066] bond0: (slave ens7f0): making interface the new active one
[ 53.378622] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[ 53.386294] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 53.549104] bond0: (slave ens7f1): Enslaving as a backup interface with an up
link
[ 54.118906] ice 0000:ca:00.0 ens7f0: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[ 54.233374] ice 0000:ca:00.1 ens7f1: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[ 54.248204] bond0: (slave ens7f0): Releasing backup interface
[ 54.253955] bond0: (slave ens7f1): making interface the new active one
[ 54.274875] bond0: (slave ens7f1): Releasing backup interface
[ 54.289153] bond0 (unregistering): Released all slaves
[ 55.383179] MII link monitoring set to 100 ms
[ 55.398696] bond0: (slave ens7f0): making interface the new active one
[ 55.405241] BUG: kernel NULL pointer dereference, address: 0000000000000080
[ 55.405289] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[ 55.412198] #PF: supervisor write access in kernel mode
[ 55.412200] #PF: error_code(0x0002) - not-present page
[ 55.412201] PGD 25d2ad067 P4D 0
[ 55.412204] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 55.412207] CPU: 0 PID: 403 Comm: kworker/0:2 Kdump: loaded Tainted: G S
5.17.0-13579-g57f2d6540f03 #1
[ 55.429094] bond0: (slave ens7f1): Enslaving as a backup interface with an up
link
[ 55.430224] Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.4.4 10/07/
2021
[ 55.430226] Workqueue: ice ice_service_task [ice]
[ 55.468169] RIP: 0010:mutex_unlock+0x10/0x20
[ 55.472439] Code: 0f b1 13 74 96 eb e0 4c 89 ee eb d8 e8 79 54 ff ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 40 ef 01 00 31 d2 <f0> 48 0f b1 17 75 01 c3 e9 e3 fe ff ff 0f 1f 00 0f 1f 44 00 00 48
[ 55.491186] RSP: 0018:ff4454230d7d7e28 EFLAGS: 00010246
[ 55.496413] RAX: ff1a79b208b08000 RBX: ff1a79b2182e8880 RCX: 0000000000000001
[ 55.503545] RDX: 0000000000000000 RSI: ff4454230d7d7db0 RDI: 0000000000000080
[ 55.510678] RBP: ff1a79d1c7e48b68 R08: ff4454230d7d7db0 R09: 0000000000000041
[ 55.517812] R10: 00000000000000a5 R11: 00000000000006e6 R12: ff1a79d1c7e48bc0
[ 55.524945] R13: 0000000000000000 R14: ff1a79d0ffc305c0 R15: 0000000000000000
[ 55.532076] FS: 0000000000000000(0000) GS:ff1a79d0ffc00000(0000) knlGS:0000000000000000
[ 55.540163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 55.545908] CR2: 0000000000000080 CR3: 00000003487ae003 CR4: 0000000000771ef0
[ 55.553041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 55.560173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 55.567305] PKRU: 55555554
[ 55.570018] Call Trace:
[ 55.572474] <TASK>
[ 55.574579] ice_service_task+0xaab/0xef0 [ice]
[ 55.579130] process_one_work+0x1c5/0x390
[ 55.583141] ? process_one_work+0x390/0x390
[ 55.587326] worker_thread+0x30/0x360
[ 55.590994] ? process_one_work+0x390/0x390
[ 55.595180] kthread+0xe6/0x110
[ 55.598325] ? kthread_complete_and_exit+0x20/0x20
[ 55.603116] ret_from_fork+0x1f/0x30
[ 55.606698] </TASK>
Fixes: f9f5301e7e ("ice: Register auxiliary device to provide RDMA")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit bfaaba99e6.
Commit bfaaba99e6 ("ice: Hide bus-info in ethtool for PRs in switchdev
mode") was a workaround for lshw tool displaying incorrect
descriptions for port representors and PF in switchdev mode. Now the issue
has been fixed in the lshw tool itself [1].
Removing the workaround can be considered a regression, as the user might
be running older, unpatched lshw version. However, another important change
(ice: link representors to PCI device, which improves port representor
netdev naming with SET_NETDEV_DEV) also causes the same "regression" as
removing the workaround, i.e. unpatched lshw is able to access bus-info
information (this time not via ethtool) and the bug can occur. Therefore,
the workaround no longer prevents the bug and can be removed.
[1] https://ezix.org/src/pkg/lshw/commit/9bf4e4c9c1
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link port representors to parent PCI device to benefit from
systemd defined naming scheme.
Example from ip tool:
- without linking:
eth0 ...
- with linking:
eth0 ...
altname enp24s0f0npf0vf0
The port representor name is being shown in altname, because the name is
longer than IFNAMSIZ (16) limit. Altname can be used in ip tool.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Drivers should call the TSO setting helper, GSO is controllable
by user space.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make later patches smaller create a helper for inheriting
the TSO limitations of a lower device. The TSO in the name
is not an accident, subsequent patches will replace GSO
with TSO in more names.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add helper functions that can create links between flow rules
and cached neighbour entries. Also add the relevant calls to
these functions.
* When a new neighbour entry gets added cycle through the saved
pre_tun flow list and link any relevant matches. Update the
neighbour table on the nfp with this new information.
* When a new pre_tun flow rule gets added iterate through the
save neighbour entries and link any relevant matches. Once
again update the nfp neighbour table with any new links.
* Do the inverse when deleting - remove any created links and
also inform the nfp of this.
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the way in which the tunnel neighbour entries
are handled. Previously they were mostly send-and-forget, with
just the destination IP's cached in a list. This update changes
to a scheme where the neighbour entry information is stored in
a hash table.
The reason for this is that the neighbour table will now also
be used on the decapsulation path, whereas previously it was
only used for encapsulation. We need to save more of the neighbour
information in order to link them with flower flows in follow
up patches.
Updating of the neighbour table is now also handled by the same
function, instead of separate *_write_neigh_vX functions.
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for more rework in following patches by updating
the existing nfp_neigh_structs. The update allows for
the same headers to be used for both old and new firmware,
with a slight length adjustment when sending the control message
to the firmware.
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a callback is received to invalidate a neighbour entry
there is no need to try and populate any other flow information.
Only the flowX->daddr information is needed as lookup key to delete
an entry from the NFP neighbour table. Fix this by only doing the
lookup if the callback is for a new entry.
As part of this cleanup remove the setting of flow6.flowi6_proto, as
this is not needed either, it looks to be a possible leftover from a
previous implementation.
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that the rule also matches on source MAC address. On top
of that also now save the src and dst MAC addresses similar to how
vlan_tci is saved - this will be used in later comparisons with
neighbour entries. Indicate if the flow matched on ipv4 or ipv6.
Populate the vlan_tpid field that got added to the pre_run_rule
struct as well.
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add calls to add and remove flows to the predt_table. This very simply
just allocates and add a new pretun entry if detected as such, and
removes it when encountered on a delete flow.
Compatibility for older firmware is kept in place through the
DECAP_V2 feature bit.
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous implementation of using a pre_tun_table for decap has
some limitations, causing flows to end up unoffloaded when in fact
we are able to offload them. This is because the pre_tun_table does
not have enough matching resolution. The next step is to instead make
use of the neighbour table which already exists for the encap direction.
This patch prepares for this by:
- Moving nfp_tun_neigh/_v6 to main.h.
- Creating two new "wrapping" structures, one to keep track of neighbour
entries (previously they were send-and-forget), and another to keep
track of pre_tun flows.
- Create a new list in nfp_flower_priv to keep track of pre_tunnel flows
- Create a new table in nfp_flower_priv to keep track of next neighbour
entries
- Initialising and destroying these new list/tables
- Extending nfp_fl_payload->pre_tun_rule to save more information for
future use.
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
