In early AMD desktop/mobile platforms (during 2013), when the IOMMU
Performance Counter (PMC) support was first introduced in
commit 30861ddc9c ("perf/x86/amd: Add IOMMU Performance Counter
resource management"), there was a HW bug where the counters could not
be accessed. The result was reading of the counter always return zero.
At the time, the suggested workaround was to add a test logic prior
to initializing the PMC feature to check if the counters can be programmed
and read back the same value. This has been working fine until the more
recent desktop/mobile platforms start enabling power gating for the PMC,
which prevents access to the counters. This results in the PMC support
being disabled unnecesarily.
Unfortunatly, there is no documentation of since which generation
of hardware the original PMC HW bug was fixed. Although, it was fixed
soon after the first introduction of the PMC. Base on this, we assume
that the buggy platforms are less likely to be in used, and it should
be relatively safe to remove this legacy logic.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210409085848.3908-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, IOMMU invalidations and device-IOTLB invalidations using
AMD IOMMU fall back to full address-space invalidation if more than a
single page need to be flushed.
Full flushes are especially inefficient when the IOMMU is virtualized by
a hypervisor, since it requires the hypervisor to synchronize the entire
address-space.
AMD IOMMUs allow to provide a mask to perform page-specific
invalidations for multiple pages that match the address. The mask is
encoded as part of the address, and the first zero bit in the address
(in bits [51:12]) indicates the mask size.
Use this hardware feature to perform selective IOMMU and IOTLB flushes.
Combine the logic between both for better code reuse.
The IOMMU invalidations passed a smoke-test. The device IOTLB
invalidations are untested.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210323210619.513069-1-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a present pasid entry is disassembled, all kinds of pasid related
caches need to be flushed. But when a pasid entry is not being used
(PRESENT bit not set), we don't need to do this. Check the PRESENT bit
in intel_pasid_tear_down_entry() and avoid flushing caches if it's not
set.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A few functions that were intentended for the perf events support are
currently declared in arch/x86/events/amd/iommu.h, which mens they are
not in scope for the actual function definition. Also amdkfd has started
using a few of them using externs in a .c file. End that misery by
moving the prototypes to the proper header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead make the global iommu_dma_strict paramete in iommu.c canonical by
exporting helpers to get and set it and use those directly in the drivers.
This make sure that the iommu.strict parameter also works for the AMD and
Intel IOMMU drivers on x86. As those default to lazy flushing a new
IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to
represent the default if not overriden by an explicit parameter.
[ported on top of the other iommu_attr changes and added a few small
missing bits]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only thing that fsl_pamu_window_enable does for the current caller
is to fill in the prot value in the only dma_window structure, and to
propagate a few values from the iommu_domain_geometry struture into the
dma_window. Remove the dma_window entirely, hardcode the prot value and
otherwise use the iommu_domain_geometry structure instead.
Remove the now unused ->domain_window_enable iommu method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-7-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some systems allow devices to handle I/O Page Faults in the core mm. For
example systems implementing the PCIe PRI extension or Arm SMMU stall
model. Infrastructure for reporting these recoverable page faults was
added to the IOMMU core by commit 0c830e6b32 ("iommu: Introduce device
fault report API"). Add a page fault handler for host SVA.
IOMMU driver can now instantiate several fault workqueues and link them
to IOPF-capable devices. Drivers can choose between a single global
workqueue, one per IOMMU device, one per low-level fault queue, one per
domain, etc.
When it receives a fault event, most commonly in an IRQ handler, the
IOMMU driver reports the fault using iommu_report_device_fault(), which
calls the registered handler. The page fault handler then calls the mm
fault handler, and reports either success or failure with
iommu_page_response(). After the handler succeeds, the hardware retries
the access.
The iopf_param pointer could be embedded into iommu_fault_param. But
putting iopf_param into the iommu_param structure allows us not to care
about ordering between calls to iopf_queue_add_device() and
iommu_register_device_fault_handler().
Tested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-7-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The second parameter of clk_get_optional() is "const char *", so use NULL
instead of integer 0 to fix a sparse warning like:
">> drivers/iommu/sprd-iommu.c:456:42: sparse: sparse: Using plain integer as NULL pointer"
Also this patch changes to use the resource-managed variant of
clk_get_optional(), then there's no need to add clk_put() which
is missed in the current driver.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20210331031645.1001913-1-zhang.lyra@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel VT-d driver checks wrong register to report snoop capablility
when using first level page table for GPA to HPA translation. This might
lead the IOMMU driver to say that it supports snooping control, but in
reality, it does not. Fix this by always setting PASID-table-entry.PGSNP
whenever a pasid entry is setting up for GPA to HPA translation so that
the IOMMU driver could report snoop capability as long as it runs in the
scalable mode.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Suggested-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210330021145.13824-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU in many SoC depends on the MM clocks and power-domain which
are device_initcall normally, thus the subsys_init here is not helpful.
This patch switches it to module_platform_driver which also allow the
driver built as module.
Correspondingly switch the config to tristate, and update the
iommu_ops's owner.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210326032337.24578-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
