This implements the callback added by the patch ("drm/dp: Add
wait_hpd_asserted() callback to struct drm_dp_aux").
With this change and all the two "DP AUX Endpoint" drivers changed to
use wait_hpd_asserted(), we no longer need to have an long delay in
the AUX transfer function. It's up to the panel code to make sure that
the panel is powered now. If someone tried to call the aux transfer
function without making sure the panel is powered we'll just get a
normal transfer failure.
We'll still keep the wait for HPD in the pre_enable() function. Though
it's probably not actually needed there, this driver is used in the
old mode (pre-DP AUX Endpoints) and it may be important for those
cases. If nothing else, it shouldn't cause any big problems.
NOTE: When handling the timeout for HPD we start the timer _after_
we've runtime resumed the device. This is definitely important for the
panel on my homestar which comes up 170 ms after we start timing (the
panel specifies 200 ms max). It's a little unclear how much of this
extra time is due to some internal state machine in the parade
firmware vs. debouncing but it seems to work for the two test cases I
have to do it this way.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614145327.v4.4.Ie827321ce263be52fdb8c1276f6f8cc00d78029f@changeid
Panel orientation property should be set before drm_dev_register().
Some drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.
In drm_bridge_connector_init(), if a bridge is a panel bridge, use it to
set the connector's panel orientation property.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-9-hsinyi@chromium.org
Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().
The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.
Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_orientation_from_panel() before
drm_dev_register().
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: removed space before tab]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-2-hsinyi@chromium.org
This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 30bpp parallel input color format and can
map the input to VESA or JEIDA standards. The two channels can be used
simultaneously, either in dual mode or split mode. In dual mode, the
two channels output identical data. In split mode, channel0 outputs
odd pixels and channel1 outputs even pixels. This patch supports the
LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-13-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 24bpp parallel input color format and can map
the input to VESA or JEIDA standards. The two channels cannot be used
simultaneously, that is to say, the user should pick one of them to use.
Two LDB channels from two LDB instances can work together in LDB split
mode to support a dual link LVDS display. The channel indexes have to be
different. Channel0 outputs odd pixels and channel1 outputs even pixels.
This patch supports the LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-12-victor.liu@nxp.com
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens. The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel. For now, the driver only supports
the bypass mode.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
Each LFP may have different panel type which is stored in LFP data
data block. Based on the child device index respective panel-type/
panel-type2 field will be used.
v1: Initial rfc verion.
v2: Based on review comments from Jani,
- Used panel-type instead addition panel-index variable.
- DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_*
macro.
v3:
- passing intel_bios_encoder_data as argument of
intel_bios_init_panel(). Passing NULL to indicate encoder is not
initialized yet for dsi as current focus is to enable dual EDP. [Jani]
v4:
- encoder->devdata used which is initialized before from vbt
structure. [Jani]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620065138.5126-1-animesh.manna@intel.com
When DMAR / VT-d is enabled, the display engine uses overfetching,
presumably to deal with the increased latency. To avoid display engine
errors and DMAR faults, as a workaround the GGTT is populated with scatch
PTEs when VT-d is enabled. However starting with gen10, Write-combined
writing of scratch PTES is no longer possible and as a result, populating
the full GGTT with scratch PTEs like on resume becomes very slow as
uncached access is needed.
Therefore, on integrated GPUs utilize the fact that the PTEs are stored in
stolen memory which retain content across S3 suspend. Don't clear the PTEs
on suspend and resume. This improves on resume time with around 100 ms.
While 100+ms might appear like a short time it's 10% to 20% of total resume
time and important in some applications.
One notable exception is Intel Rapid Start Technology which may cause
stolen memory to be lost across what the OS percieves as S3 suspend.
If IRST is enabled or if we can't detect whether IRST is enabled, retain
the old workaround, clearing and re-instating PTEs.
As an additional measure, if we detect that the last ggtt pte was lost
during suspend, print a warning and re-populate the GGTT ptes
On discrete GPUs, the display engine scans out from LMEM which isn't
subject to DMAR, and presumably the workaround is therefore not needed,
but that needs to be verified and disabling the workaround for dGPU,
if possible, will be deferred to a follow-up patch.
v2:
- Rely on retained ptes to also speed up suspend and resume re-binding.
- Re-build GGTT ptes if Intel rst is enabled.
v3:
- Re-build GGTT ptes also if we can't detect whether Intel rst is enabled,
and if the guard page PTE and end of GGTT was lost.
v4:
- Fix some kerneldoc issues (Matthew Auld), rebase.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617152856.249295-1-thomas.hellstrom@linux.intel.com
The device is identified by "NEXT" in board name, however there are
different versions of it, "Next Advance" and "Next Pro", that have
different DMI board names.
Due to a production error a batch or two have their board names prefixed
by "AYANEO", this makes it 6 different DMI board names. To save some
space in final kernel image DMI_MATCH is used instead of
DMI_EXACT_MATCH.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220619111952.8487-1-maccraft123mc@gmail.com
Display resolution change is implemented through drm modeset. Older
modeset (resolution) has to be disabled first before newer modeset
(resolution) can be enabled. Display disable will turn off both
pixel clock and main link clock so that main link have to be
re-trained during display enable to have new video stream flow
again. At current implementation, display enable function manually
kicks up irq_hpd_handle which will read panel link status and start
link training if link status is not in sync state.
However, there is rare case that a particular panel links status keep
staying in sync for some period of time after main link had been shut
down previously at display disabled. In this case, main link retraining
will not be executed by irq_hdp_handle(). Hence video stream of newer
display resolution will fail to be transmitted to panel due to main
link is not in sync between host and panel.
This patch will bypass irq_hpd_handle() in favor of directly call
dp_ctrl_on_stream() to always perform link training in regardless of
main link status. So that no unexpected exception resolution change
failure cases will happen. Also this implementation are more efficient
than manual kicking off irq_hpd_handle function.
Changes in v2:
-- set force_link_train flag on DP only (is_edp == false)
Changes in v3:
-- revise commit text
-- add Fixes tag
Changes in v4:
-- revise commit text
Changes in v5:
-- fix spelling at commit text
Changes in v6:
-- split dp_ctrl_on_stream() for phy test case
-- revise commit text for modeset
Changes in v7:
-- drop 0 assignment at local variable (ret = 0)
Changes in v8:
-- add patch to remove pixel_rate from dp_ctrl
Changes in v9:
-- forward declare dp_ctrl_on_stream_phy_test_report()
Fixes: 62671d2ef2 ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489895/
Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
As explained in [1], using max_linewidth to limit the modes
does not seem to remove 4K modes on chipsets such as
sm8250 where the max_linewidth actually supports 4k.
This would have been alright if dual SSPP support was
present but otherwise fails the per SSPP bandwidth check.
The ideal way to implement this would be to filter out
the modes which will exceed the bandwidth check by computing
it.
But this would be an exhaustive solution till we have
dual SSPP support.
Let's instead use max_mixer_width to limit the modes.
max_mixer_width still remains 2560 on sm8250 so even if
the max_linewidth is 4096, the only way 4k modes could have
been supported is to have source split enabled on the SSPP.
Since source split support is not enabled yet in DPU driver,
enforce max_mixer_width as the upper limit on the modes.
[1] https://patchwork.freedesktop.org/patch/489662/
Fixes: e67dcecda0 ("drm/msm/dpu: limit writeback modes according to max_linewidth")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489893/
Link: https://lore.kernel.org/r/1655407606-21760-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
During msm initialize phase, dp_display_unbind() will be called to undo
initializations had been done by dp_display_bind() previously if there is
error happen at msm_drm_bind. In this case, core_initialized flag had to
be check to make sure clocks is on before update DP controller register
to disable HPD interrupts. Otherwise system will crash due to below NOC
fatal error.
QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007
QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007
QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024
QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042
QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c
QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c
QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002
QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001
QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006
QTISECLIB [01f23dfd3]NOC error fatal
changes in v2:
-- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch
Fixes: 570d3e5d28 ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488387/
Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Prior to the last commit, this could result in setting the GPU
written fence value back to an older value, if we had missed
updating completed_fence prior to suspend. This was mostly
harmless as the GPU would eventually overwrite it again with
the correct value. But we should just not do this. Instead
just leave a sanity check that the fence looks plausible (in
case the GPU scribbled on memory).
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490138/
Link: https://lore.kernel.org/r/20220618161120.3451993-2-robdclark@gmail.com
I noticed while looking at some traces, that we could miss calls to
msm_update_fence(), as the irq could have raced with retire_submits()
which could have already popped the last submit on a ring out of the
queue of in-flight submits. But walking the list of submits in the
irq handler isn't really needed, as dma_fence_is_signaled() will dtrt.
So lets just drop it entirely.
v2: use spin_lock_irqsave/restore as we are no longer protected by the
spin_lock_irqsave/restore() in update_fences()
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490136/
Link: https://lore.kernel.org/r/20220618161120.3451993-1-robdclark@gmail.com
Let's replace the assortment of intel_gt_* and intel_uncore_* functions
that operate on MCR registers with a cleaner set of interfaces:
* intel_gt_mcr_read -- unicast read from specific instance
* intel_gt_mcr_read_any[_fw] -- unicast read from any non-terminated
instance
* intel_gt_mcr_unicast_write -- unicast write to specific instance
* intel_gt_mcr_multicast_write[_fw] -- multicast write to all instances
We'll also replace the historic "slice" and "subslice" terminology with
"group" and "instance" to match the documentation for more recent
platforms; these days MCR steering applies to more types of replication
than just slice/subslice.
v2:
- Reference the new kerneldoc from i915.rst. (Jani)
- Tweak the wording of the documentation for a couple functions to
clarify the difference between "_fw" and non-"_fw" forms.
v3:
- s/read/write/ to fix copy-paste mistake in a couple comments.
(Harish)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-3-matthew.d.roper@intel.com
Handling of multicast/replicated registers is spread across intel_gt.c
and intel_uncore.c today. As multicast handling and the related
steering logic gets more complicated with the addition of new platforms
and new rules it makes sense to centralize it all in one place.
For now the existing functions have been moved to the new .c/.h as-is.
Function renames and updates to operate in a more consistent manner will
be done in subsequent patches.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-2-matthew.d.roper@intel.com
