For some cases (accessing registers, unmap legacy queue), it needs
access mes in atomic context. Use spinlock to protect agaist mes
ring buffer race condition.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Output Data Mapping is a power saving feature that allows us to run at
reduced DPP and DISP clocks compared to what could be achieved with a
single pipe.
Set the default policy for single display use case to use 2 to 1 ODM combine.
The options are queried by DC and appropriate register programming sequence
is initiated to enable this feature.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add a missing callback to set DIG FIFO output pixel mode. This is used
when ODM combine is activated.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although all DSS belong to a single pool on Xe_HP platforms (i.e.,
they're not organized into slices from a topology point of view), we do
still need to pass 'group' and 'instance' targets when steering register
accesses to a specific instance of a per-DSS multicast register. The
rules for how to determine group and instance IDs (which previously used
legacy terms "slice" and "subslice") varies by platform. Some platforms
determine steering by gslice membership, some platforms by cslice
membership, and future platforms may have other rules.
Since looping over each DSS and performing steered unicast register
accesses is a relatively common pattern, let's add a dedicated iteration
macro to handle this (and replace the platform-specific "instdone" loop
we were using previously. This will avoid the calling code needing to
figure out the details about how to obtain steering IDs for a specific
DSS.
Most of the places where we use this new loop are in the GPU errorstate
code at the moment, but we do have some additional features coming in
the future that will also need to loop over each DSS and steer some
register accesses accordingly.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701232006.1016135-1-matthew.d.roper@intel.com
There are several things wrong here. First, none of these
numbers are FP, so there is no need to cast to double. Next
make sure to use proper 64 bit division helpers.
Fixes: 85f4bc0c33 ("drm/amd/display: Add SubVP required code")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately. Make the
code simpler without functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The global sseu config is applicable only to gen11 platforms where
concurrent media, render and OA use cases may cause some subslices to be
turned off and hence lose NOA configuration. Ideally we want to return
ENODEV for non-gen11 platforms, however, this has shipped with gfx12, so
disable only for gfx12.50+.
v2: gfx12 is already shipped with this, disable for gfx12.50+ (Lionel)
v3: (Matt)
- Update commit message and replace "12.5" with "12.50"
- Replace DRM_DEBUG() with driver specific drm_dbg()
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-2-umesh.nerlige.ramappa@intel.com
Even though the IOVA API never actually needed it, iova.h is still
carrying an include of dma-mapping.h, now solely for the sake of not
breaking tegra-drm. Fix that properly.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The code assumes that Tegra GEM is permanently vmapped, which is not
true for the scattered buffers. After converting Tegra video decoder
driver to V4L API, we're now getting a BUG_ON from dma-buf core on playing
video using libvdpau-tegra on T30+ because tegra_gem_prime_vmap() sets
vaddr to NULL. Older pre-V4L video decoder driver wasn't vmapping dma-bufs.
Fix it by actually vmapping the exported GEMs.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drivers/gpu/drm/tegra/vic.c:326:12: error: ‘vic_runtime_suspend’ defined but not used [-Werror=unused-function]
static int vic_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/tegra/vic.c:292:12: error: ‘vic_runtime_resume’ defined but not used [-Werror=unused-function]
static int vic_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~
Mark it as __maybe_unused.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Tegra234 support for VIC. It is backwards compatible with
Tegra194.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement the get_streamid_offset and can_use_memory_ctx callbacks
required for supporting context isolation. Since old firmware on VIC
cannot support context isolation without hacks that we don't want to
implement, check the firmware binary to see if context isolation
should be enabled.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For engines that support context isolation, allocate a context when
opening a channel, and set up stream ID offset and context fields
when submitting a job.
As of this commit, the stream ID offset and fallback stream ID
are not used when context isolation is disabled. However, with
upcoming patches that enable a full featured job opcode sequence,
these will be necessary.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
NVDEC's TRANSCFG register is at a different offset than VIC.
This becomes a problem now when context isolation is enabled and
the reset value of the register is no longer sufficient.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DMACTX field determines which context, as specified in the
TRANSCFG register, is used. While during boot it doesn't matter
which is used, later on it matters and this value is reused by
the firmware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[Why]
Changes from "Fix for dmub outbox notification enable" need to land
in DM or DMUB outbox notification would be disabled.
[How]
Enable outbox notification only after interrupt are enabled and IRQ
handlers registered. Any pending notification will be sent by DMUB
once outbox notification is enabled.
Fixes: ed72087064 ("drm/amd/display: Fix for dmub outbox notification enable")
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Queue would be freed when create_queue_cpsch fails
So lets do queue cleanup otherwise various list and memory issues
happen.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I was getting the following message on boot on Linux 5.19-rc5:
radeon 0000:01:05.0: vram limit (0) must be a power of 2
(I didn't use any radeon.vramlimit commandline parameter).
This is caused by
commit 8c2d34eb53 ("drm/radeon: use kernel is_power_of_2 rather than local version")
which removed radeon_check_pot_argument() and converted its users to
is_power_of_2(). The two functions differ in its handling of 0, which is
the default value of radeon_vram_limit: radeon_check_pot_argument()
"incorrectly" considered it a power of 2, while is_power_of_2() does not.
An appropriate conditional silences the warning message.
It is not necessary to add a similar test to other callers of
is_power_of_2() in radeon_device.c. The matching commit in amdgpu:
commit 7611750784 ("drm/amdgpu: use kernel is_power_of_2 rather than local version")
is unaffected by this bug.
Tested on Radeon HD 3200.
Not ccing stable, this is not serious enough.
Fixes: 8c2d34eb53 ("drm/radeon: use kernel is_power_of_2 rather than local version")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hwseq.c:428:33: warning: variable 'old_pipe' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The return value indicates whether the operation(disable/enable) succeeded
or not. The existing logic reports wrong result even if the disablement was
performed successfully. That will make succeeding reenablement abandoned
as dc->idle_optimizations_allowed is always true.
[How]
Correct the return value to reflect the real result of disablement.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no reason to require the primary plane to always be at the
bottom of the stack, as the VSP supports arbitrary ordering of planes,
and the KMS API doesn't have such a requirement either. Lift the
restriction.
As the primary plane can now be positioned arbitrarily, enable control
of its alpha channel as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Tomohito Esaki <etom@igel.co.jp>
As per R-Car-Gen3_Common_OPC_Customer_Notifications_V30.1.pdf,
unexpected image output(such as incorrect colors or planes being
invisible) can happen on the below conditions, as PnALPHAR register
is not initialized by reset.
When alpha blending (PpMRm.PpSPIM=0b101) is performed and:
•two Planes are enabled on any DUn (n=0,1,2,3)
oDSPRn= 0x0000 0031 or 0x0000 0013
•or DU0 and DU1 is used for display at the same time
oDSPR0= 0x0000 0001 and DSPR1= 0x0000 0003
oDSPR0= 0x0000 0003 and DSPR1= 0x0000 0001
•or DU2 and DU3(H3 Only) is used for display at the same time
oDSPR2= 0x0000 0001 and DSPR3= 0x0000 0003
oDSPR2= 0x0000 0003 and DSPR3= 0x0000 0001
This patch set PnALPHAR register to 0 to avoid this issue.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To avoid preventing the display from coming up before the rootfs is
mounted, without resorting to packing fw in the initrd, the GPU has
this limbo state where the device is probed, but we aren't ready to
start sending commands to it. This is particularly problematic for
a6xx, since the GMU (which requires fw to be loaded) is the one that
is controlling the power/clk/icc votes.
So defer enabling runpm until we are ready to call gpu->hw_init(),
as that is a point where we know we have all the needed fw and are
ready to start sending commands to the coproc's.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489337/
Link: https://lore.kernel.org/r/20220613182036.2567963-1-robdclark@gmail.com
