Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/radeon/radeon_fence.c:168: warning: Function parameter or member 'wait' not described in 'radeon_fence_check_signaled'
drivers/gpu/drm/radeon/radeon_fence.c:168: warning: Function parameter or member 'mode' not described in 'radeon_fence_check_signaled'
drivers/gpu/drm/radeon/radeon_fence.c:168: warning: Function parameter or member 'flags' not described in 'radeon_fence_check_signaled'
drivers/gpu/drm/radeon/radeon_fence.c:168: warning: Function parameter or member 'key' not described in 'radeon_fence_check_signaled'
drivers/gpu/drm/radeon/radeon_fence.c:393: warning: Function parameter or member 'f' not described in 'radeon_fence_enable_signaling'
drivers/gpu/drm/radeon/radeon_fence.c:393: warning: Excess function parameter 'fence' description in 'radeon_fence_enable_signaling'
drivers/gpu/drm/radeon/radeon_fence.c:1010: warning: Function parameter or member 'm' not described in 'radeon_debugfs_gpu_reset'
drivers/gpu/drm/radeon/radeon_fence.c:1010: warning: Function parameter or member 'data' not described in 'radeon_debugfs_gpu_reset'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jerome Glisse <glisse@freedesktop.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/radeon/radeon_kms.c:61:6: warning: no previous prototype for ‘radeon_driver_unload_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:104:5: warning: no previous prototype for ‘radeon_driver_load_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:618:6: warning: no previous prototype for ‘radeon_driver_lastclose_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:633:5: warning: no previous prototype for ‘radeon_driver_open_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:704:6: warning: no previous prototype for ‘radeon_driver_postclose_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:755:5: warning: no previous prototype for ‘radeon_get_vblank_counter_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:825:5: warning: no previous prototype for ‘radeon_enable_vblank_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:852:6: warning: no previous prototype for ‘radeon_disable_vblank_kms’ [-Wmissing-prototypes]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Demote non-conformant headers
- Fix misnaming issues
- Rename labels with identical names
- Remove incorrect descriptions
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/radeon/radeon_device.c:637:6: warning: no previous prototype for ‘radeon_device_is_virtual’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_device.c:552: warning: duplicate section name 'Note'
drivers/gpu/drm/radeon/radeon_device.c:556: warning: duplicate section name 'Note'
drivers/gpu/drm/radeon/radeon_device.c:561: warning: duplicate section name 'Note'
drivers/gpu/drm/radeon/radeon_device.c:564: warning: duplicate section name 'Note'
drivers/gpu/drm/radeon/radeon_device.c:1106: warning: Function parameter or member 'family' not described in 'radeon_gart_size_auto'
drivers/gpu/drm/radeon/radeon_device.c:1291: warning: Function parameter or member 'ddev' not described in 'radeon_device_init'
drivers/gpu/drm/radeon/radeon_device.c:1565: warning: Function parameter or member 'dev' not described in 'radeon_suspend_kms'
drivers/gpu/drm/radeon/radeon_device.c:1565: warning: Function parameter or member 'suspend' not described in 'radeon_suspend_kms'
drivers/gpu/drm/radeon/radeon_device.c:1565: warning: Function parameter or member 'fbcon' not described in 'radeon_suspend_kms'
drivers/gpu/drm/radeon/radeon_device.c:1565: warning: Function parameter or member 'freeze' not described in 'radeon_suspend_kms'
drivers/gpu/drm/radeon/radeon_device.c:1565: warning: Excess function parameter 'pdev' description in 'radeon_suspend_kms'
drivers/gpu/drm/radeon/radeon_device.c:1565: warning: Excess function parameter 'state' description in 'radeon_suspend_kms'
drivers/gpu/drm/radeon/radeon_device.c:1669: warning: Function parameter or member 'dev' not described in 'radeon_resume_kms'
drivers/gpu/drm/radeon/radeon_device.c:1669: warning: Function parameter or member 'resume' not described in 'radeon_resume_kms'
drivers/gpu/drm/radeon/radeon_device.c:1669: warning: Function parameter or member 'fbcon' not described in 'radeon_resume_kms'
drivers/gpu/drm/radeon/radeon_device.c:1669: warning: Excess function parameter 'pdev' description in 'radeon_resume_kms'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently drivers get called to move a buffer, but if they have to
move it temporarily through another space (SYSTEM->VRAM via TT)
then they can end up with a lot of ttm->driver->ttm call stacks,
if the temprorary space moves requires eviction.
Instead of letting the driver do all the placement/space for the
temporary, allow it to report back (-EMULTIHOP) and a placement (hop)
to the move code, which will then do the temporary move, and the
correct placement move afterwards.
This removes a lot of code from drivers, at the expense of
adding some midlayering. I've some further ideas on how to turn
it inside out, but I think this is a good solution to the call
stack problems.
v2: separate out the driver patches, add WARN for getting
MULTHOP in paths we shouldn't (Daniel)
v3: use memset (Christian)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: hristian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-2-airlied@gmail.com
We need commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
amd-drm-next-5.11-2020-11-05:
amdgpu:
- Add initial support for Vangogh
- Add support for Green Sardine
- Add initial support for Dimgrey Cavefish
- Scatter/Gather display support for Renoir
- Updates for Sienna Cichlid
- Updates for Navy Flounder
- SMU7 power improvements
- Modifier support for gfx9+
- CI BACO fixes
- Arcturus SMU fixes
- Lots of code cleanups
- DC fixes
- Kernel doc fixes
- Add more GPU HW client information to page fault error logging
- MPO clock tuning for RV
- FP fixes for DCN3 on ARM and PPC
radeon:
- Expose voltage via hwmon on Sumo APUs
amdkfd:
- Fix unique id handling
- Misc fixes
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105222749.201798-1-alexander.deucher@amd.com
This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.
TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.
v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
Create hwmon attribute for vddc, that uses previously declared get_current_vddc() callback if there's an implementation available.
Also hides vddc, if there is no implementation for the current chipset (as per Alexander Deucher's suggestion).
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a callback for reporting vddc, to the dpm field of the radeon_asic structure.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for 5.10:
UAPI Changes:
Cross-subsystem Changes:
- virtio: Merged a PR for patches that will affect drm/virtio
Core Changes:
- dev: More devm_drm convertions and removal of drm_dev_init
- atomic: Split out drm_atomic_helper_calc_timestamping_constants of
drm_atomic_helper_update_legacy_modeset_state
- ttm: More rework
Driver Changes:
- i915: selftests improvements
- panfrost: support for Amlogic SoC
- vc4: one fix
- tree-wide: conversions to devm_drm_dev_alloc,
- ast: simplifications of the atomic modesetting code
- panfrost: multiple fixes
- vc4: multiple fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
