There's no need to have separate masks for the stride bitfield
in PLANE_STRIDE for different platforms. All the extra bits
are hardcoded to zero anyway.
Also the masks we're using now don't even match the actual hardware
since the bitfield was only 10 bits on skl/derivatives, only getting
bumped to 11 bits on glk.
So let's just use a 12 bit mask for everything.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Move DisplayPort functions into a separate module to reduce the size
of the KMS helpers. Select DRM_DP_HELPER for all users of the code. To
avoid naming conflicts, rename drm_dp_helper.c to drm_dp.c
This change can help to reduce the size of the kernel binary. Some
numbers from a x86-64 test build:
Before:
drm_kms_helper.ko: 447480 bytes
After:
drm_dp_helper.ko: 216632 bytes
drm_kms_helper.ko: 239424 bytes
For early-boot graphics, generic DRM drivers, such as simpledrm,
require DRM KMS helpers to be built into the kernel. Generic helper
functions for DisplayPort take up a significant portion of DRM KMS
helper library. These functions are not used by generic drivers and
can be loaded as a module.
v3:
* fix include statement in DRM selftests
v2:
* move DP helper code into dp/ (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-4-tzimmermann@suse.de
Pull drm fixes from Daniel Vetter:
"drivers fixes:
- i915 fixes for ttm backend + one pm wakelock fix
- amdgpu fixes, fairly big pile of small things all over. Note this
doesn't yet containe the fixed version of the otg sync patch that
blew up
- small driver fixes: meson, sun4i, vga16fb probe fix
drm core fixes:
- cma-buf heap locking
- ttm compilation
- self refresh helper state check
- wrong error message in atomic helpers
- mipi-dbi buffer mapping"
* tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm: (49 commits)
drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy
drm: fix error found in some cases after the patch d1af5cd86997
drm/ttm: fix compilation on ARCH=um
dma-buf: cma_heap: Fix mutex locking section
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
drm/amdkfd: Fix ASIC name typos
drm/amdkfd: Fix DQM asserts on Hawaii
drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2
drm/amd/pm: only send GmiPwrDnControl msg on master die (v3)
drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interrupt
drm/amdgpu: not return error on the init_apu_flags
drm/amdkfd: Use prange->update_list head for remove_list
drm/amdkfd: Use prange->list head for insert_list
drm/amdkfd: make SPDX License expression more sound
drm/amdkfd: Check for null pointer after calling kmemdup
drm/amd/display: invalid parameter check in dmub_hpd_callback
Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process"
drm/amd/display: reset dcn31 SMU mailbox on failures
drm/amdkfd: use default_groups in kobj_type
drm/amdgpu: use default_groups in kobj_type
...
If the GuC fails to load, it is useful to know what firmware file /
version was attempted. So move the version info report to before the
load attempt rather than only after a successful load.
If the GuC does fail to load, then make the error messages visible
rather than being 'debug' prints that do not appears in dmesg output
by default.
When waiting for the GuC to load, it used to be necessary to check for
two different states - READY and (LAPIC_DONE | MIA_CORE). Apparently
the second signified init complete on RC6 exit. However, in more
recent GuC versions the RC6 exit sequence now finishes with status
READY as well. So the test can be simplified.
Also, add an enum giving all the current status codes that GuC loading
can report as a reference without having to pull and search through
the GuC source files.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-4-John.C.Harrison@Intel.com
Update to the latest GuC release.
The latest GuC firmware introduces a number of interface changes:
GuC may return NO_RESPONSE_RETRY message for requests sent over CTB.
Add support for this reply and try resending the request again as a
new CTB message.
A KLV (key-length-value) mechanism is now used for passing
configuration data such as CTB management.
With the new KLV scheme, the old CTB management actions are no longer
used and are removed.
Register capture on hang is now supported by GuC. Full i915 support
for this will be added by a later patch. A minimum support of
providing capture memory and register lists is required though, so add
that in.
The device id of the current platform needs to be provided at init time.
The 'poll CS' w/a (Wa_22012773006) was blanket enabled by previous
versions of GuC. It must now be explicitly requested by the KMD. So,
add in the code to turn it on when relevant.
The GuC log entry format has changed. This requires adding a new field
to the log header structure to mark the wrap point at the end of the
buffer (as the buffer size is no longer a multiple of the log entry
size).
New CTB notification messages are now sent for some things that were
previously only sent via MMIO notifications.
Of these, the crash dump notification was not really being handled by
i915. It called the log flush code but that only flushed the regular
debug log and then only if relay logging was enabled. So just report
an error message instead.
The 'exception' notification was just being ignored completely. So add
an error message for that as well.
Note that in either the crash dump or the exception case, the GuC is
basically dead. The KMD will detect this via the heartbeat and trigger
both an error log (which will include the crash dump as part of the
GuC log) and a GT reset. So no other processing is really required.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-3-John.C.Harrison@Intel.com
There is a known (but exceedingly unlikely) race condition where the
asynchronous frequency management code could reduce the GT clock while
a GuC reload is in progress (during a full GT reset). A fix is in
progress but there are complex locking issues to be resolved. In the
meantime bump the timeout to 200ms. Even at slowest clock, this
should be sufficient. And in the working case, a larger timeout makes
no difference.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107000622.292081-2-John.C.Harrison@Intel.com
Implement async (non-blocking) unbinding by not syncing the vma before
calling unbind on the vma_resource.
Add the resulting unbind fence to the object's dma_resv from where it is
picked up by the ttm migration code.
Ideally these unbind fences should be coalesced with the migration blit
fence to avoid stalling the migration blit waiting for unbind, as they
can certainly go on in parallel, but since we don't yet have a
reasonable data structure to use to coalesce fences and attach the
resulting fence to a timeline, we defer that for now.
Note that with async unbinding, even while the unbind waits for the
preceding bind to complete before unbinding, the vma itself might have been
destroyed in the process, clearing the vma pages. Therefore we can
only allow async unbinding if we have a refcounted sg-list and keep a
refcount on that for the vma resource pages to stay intact until
binding occurs. If this condition is not met, a request for an async
unbind is diverted to a sync unbind.
v2:
- Use a separate kmem_cache for vma resources for now to isolate their
memory allocation and aid debugging.
- Move the check for vm closed to the actual unbinding thread. Regardless
of whether the vm is closed, we need the unbind fence to properly wait
for capture.
- Clear vma_res::vm on unbind and update its documentation.
v4:
- Take cache coloring into account when searching for vma resources
pending unbind. (Matthew Auld)
v5:
- Fix timeout and error check in i915_vma_resource_bind_dep_await().
- Avoid taking a reference on the object for async binding if
async unbind capable.
- Fix braces around a single-line if statement.
v6:
- Fix up the cache coloring adjustment. (Kernel test robot <lkp@intel.com>)
- Don't allow async unbinding if the vma_res pages are not the same as
the object pages. (Matthew Auld)
v7:
- s/unsigned long/u64/ in a number of places (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-5-thomas.hellstrom@linux.intel.com
