The immediate enabling was actually not an issue for the
HW perspective for core platforms that have HW tracking.
HW will wait few identical idle frames before transitioning
to actual psr active anyways.
Now that we removed VLV/CHV out of the picture completely
we can safely remove any delays.
Note that this patch also remove the delayed activation
on HSW and BDW introduced by commit 'd0ac896a477d
("drm/i915: Delay first PSR activation.")'. This was
introduced to fix a blank screen on VLV/CHV and also
masked some frozen screens on other core platforms.
Probably the same that we are now properly hunting and fixing.
v2:(DK): Remove unnecessary WARN_ONs and make some other
VLV | CHV more readable.
v3: Do it regardless the timer rework.
v4: (DK/CI): Add VLV || CHV check on cancel work at psr_disable.
v5: Kill remaining items and fully rework activation functions.
v6: Rebase on top of VLV/CHV clean-up and keep the reactivation
on a regular non-delayed work to avoid extra delays on exit
calls and allow us to add few more safety checks before
real activation.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180613192600.3955-1-rodrigo.vivi@intel.com
Due to a silent conflict (silent because we are trying to fix the CI
test that is meant to exercising these failures!) between commit
51e645b665 ("drm/i915: Mark the GPU as wedged without error on fault
injection") and commit 8571a05a9d ("drm/i915: Use GEM suspend when
aborting initialisation"), we failed to actually squash the error
message after injecting the load failure.
Rearrange the code to export i915_load_failure() for better logging of
real errors (and quiet logging of injected errors).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180609111058.2660-1-chris@chris-wilson.co.uk
We currently using GuC as a proxy to the hardware. When Guc is used in
such mode, it consumes the bit 20 of the hw_id to indicate that the
workload was submitted by proxy.
So far we probably haven't seen the issue because we need to allocate
1048576+ contexts to hit this issue. Still, we should avoid allocating
the hw_id on that bit and restriction to bits [0:19] (i.e 20bits
instead of 21).
v2: Leave the max hw_id computation in i915_gem_context.c (Michel)
v3: Be consistent on if/else usage (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
BSpec: 1237
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180602112946.30803-2-lionel.g.landwerlin@intel.com
During testing we encounter a conflict between SUSPEND_TEST_DEVICES and
disabling reset (gem_eio/suspend). This results in the device continuing
on without being reset, but since it has gone through HW sanitization to
account for the suspend/resume cycle, we have to assume the device has
been reset to its defaults. A simple way around this is to skip the
sanitize phase for SUSPEND_TEST_DEVICES by moving it to suspend-late.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180531082246.9763-4-chris@chris-wilson.co.uk
PSR hardware and hence the driver code for VLV and CHV deviates a lot from
their DDI counterparts. While the feature has been disabled for a long time
now, retaining support for these platforms is a maintenance burden. There
have been multiple refactoring commits to just keep the existing code for
these platforms in line with the rest. There are known issues that need to
be fixed to enable PSR on these platforms, and there is no PSR capable
platform in CI to ensure the code does not break again if we get around to
fixing the existing issues. On account of all these reasons, let's nuke
this code for now and bring it back if a need arises in the future.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511230059.19387-1-dhinakaran.pandiyan@intel.com
For psr block #9, the vbt description has moved to options [0-3] for
TP1,TP2,TP3 Wakeup time from decimal value without any change to vbt
structure. Since spec does not mention from which VBT version this
change was added to vbt.bsf file, we cannot depend on bdb->version check
to change for all the platforms.
There is RCR inplace for GOP team to provide the version number
to make generic change. Since Kabylake with bdb version 209 is having this
change, limiting this change to gen9_bc and version 209+ to unblock google.
Tested on skl(bdb version 203,without options) and
kabylake(bdb version 209,212) having new options.
bspec 20131
v2: (Jani and Rodrigo)
move the 165 version check to intel_bios.c
v3: Jani
Move the abstraction to intel_bios.
v4: Jani
Rename tp*_wakeup_time to have "us" suffix.
For values outside range[0-3],default to max 2500us.
Old decimal value was wake up time in multiples of 100us.
v5: Jani and Rodrigo
Handle option 2 in default condition.
Print oustide range value.
For negetive values default to 2500us.
v6: Jani
Handle default first and then fall through for case 2.
v7: Rodrigo
Apply this change for IS_GEN9_BC and vbt version > 209
v8: Puthik
Add new function vbt_psr_to_us.
v9: Jani
Change to v7 version as it's more readable.
DK
add comment /*fall through*/ after case2.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Puthikorn Voravootivat <puthik@chromium.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526981243-2745-1-git-send-email-vathsala.nagaraju@intel.com
WaProgramMgsrForCorrectSliceSpecificMmioReads dictate that before any MMIO
read into Slice/Subslice specific registers, MCR packet control
register(0xFDC) needs to be programmed to point to any enabled
slice/subslice pair. Otherwise, incorrect value will be returned.
However, that means each subsequent MMIO read will be forwarded to a
specific slice/subslice combination as read is unicast. This is OK since
slice/subslice specific register values are consistent in almost all cases
across slice/subslice. There are rare occasions such as INSTDONE that this
value will be dependent on slice/subslice combo, in such cases, we need to
program 0xFDC and recover this after. This is already covered by
read_subslice_reg.
Also, 0xFDC will lose its information after TDR/engine reset/power state
change.
References: HSD#1405586840, BSID#0575
v2:
- use fls() instead of find_last_bit() (Chris)
- added INTEL_SSEU to extract sseu from device info. (Chris)
v3:
- rebase on latest tip
v5:
- Added references (Mika)
- Change the ordered of passing arguments and etc. (Ursulin)
v7:
- Moved WA explanation Comments(Oscar)
- Rebased.
v8:
- Renamed sanitize_mcr to calculate_s_ss_select. (Oscar)
- calculate s/ss selector instead of whole mcr. (Oscar)
v9:
- Updated function name (Oscar)
- Remove redundant variables (Oscar)
v10:
- Separate pre-GEN10 and GEN11 mask. (Oscar)
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Yunwei Zhang <yunwei.zhang@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526683197-24656-1-git-send-email-yunwei.zhang@intel.com
Inherit workarounds from previous platforms that are still valid for
Icelake.
v2: GEN7_ROW_CHICKEN2 is masked
v3:
- Since it has been fixed already in upstream, removed the TODO
comment about WA_SET_BIT for WaInPlaceDecompressionHang.
- Squashed with this patch:
drm/i915/icl: add icelake_init_clock_gating()
from Paulo Zanoni <paulo.r.zanoni@intel.com>
- Squashed with this patch:
drm/i915/icl: WaForceEnableNonCoherent
from Oscar Mateo <oscar.mateo@intel.com>
- WaPushConstantDereferenceHoldDisable is now Wa_1604370585 and
applies to B0 as well.
- WaPipeControlBefore3DStateSamplePattern WABB was being applied
to ICL incorrectly.
v4:
- Wrap the commit message
- s/dev_priv/p to please checkpatch
v5: Rebased on top of the WA refactoring
v6: Rebased on top of further whitelist registers refactoring (Michel)
v7: Added WaRsForcewakeAddDelayForAck
v8: s/ICL_HDC_CHICKEN0/ICL_HDC_MODE (Mika)
v9:
- C, not lisp (Chris)
- WaIncreaseDefaultTLBEntries is the same for GEN > 9_LP (Tvrtko)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-2-git-send-email-oscar.mateo@intel.com
When userspace is passing around swapbuffers using DRI, we frequently
have to open and close the same object in the foreign address space.
This shows itself as the same object being rebound at roughly 30fps
(with a second object also being rebound at 30fps), which involves us
having to rewrite the page tables and maintain the drm_mm range manager
every time.
However, since the object still exists and it is only the local handle
that disappears, if we are lazy and do not unbind the VMA immediately
when the local user closes the object but defer it until the GPU is
idle, then we can reuse the same VMA binding. We still have to be
careful to mark the handle and lookup tables as closed to maintain the
uABI, just allowing the underlying VMA to be resurrected if the user is
able to access the same object from the same context again.
If the object itself is destroyed (neither userspace keeping a handle to
it), the VMA will be reaped immediately as usual.
In the future, this will be even more useful as instantiating a new VMA
for use on the GPU will become heavier. A nuisance indeed, so nip it in
the bud.
v2: s/__i915_vma_final_close/i915_vma_destroy/ etc.
v3: Leave a hint as to why we deferred the unbind on close.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-1-chris@chris-wilson.co.uk
We need to move to a more flexible timeline that doesn't assume one
fence context per engine, and so allow for a single timeline to be used
across a combination of engines. This means that preallocating a fence
context per engine is now a hindrance, and so we want to introduce the
singular timeline. From the code perspective, this has the notable
advantage of clearing up a lot of mirky semantics and some clumsy
pointer chasing.
By splitting the timeline up into a single entity rather than an array
of per-engine timelines, we can realise the goal of the previous patch
of tracking the timeline alongside the ring.
v2: Tweak wait_for_idle to stop the compiling thinking that ret may be
uninitialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-2-chris@chris-wilson.co.uk
In the future, we want to move a request between engines. To achieve
this, we first realise that we have two timelines in effect here. The
first runs through the GTT is required for ordering vma access, which is
tracked currently by engine. The second is implied by sequential
execution of commands inside the ringbuffer. This timeline is one that
maps to userspace's expectations when submitting requests (i.e. given the
same context, batch A is executed before batch B). As the rings's
timelines map to userspace and the GTT timeline an implementation
detail, move the timeline from the GTT into the ring itself (per-context
in logical-ring-contexts/execlists, or a global per-engine timeline for
the shared ringbuffers in legacy submission.
The two timelines are still assumed to be equivalent at the moment (no
migrating requests between engines yet) and so we can simply move from
one to the other without adding extra ordering.
v2: Reinforce that one isn't allowed to mix the engine execution
timeline with the client timeline from userspace (on the ring).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-1-chris@chris-wilson.co.uk
In the next patch, rings are the central timeline as requests may jump
between engines. Therefore in the future as we retire in order along the
engine timeline, we may retire out-of-order within a ring (as the ring now
occurs along multiple engines), leading to much hilarity in miscomputing
the position of ring->head.
As an added bonus, retiring along the ring reduces the penalty of having
one execlists client do cleanup for another (old legacy submission
shares a ring between all clients). The downside is that slow and
irregular (off the critical path) process of cleaning up stale requests
after userspace becomes a modicum less efficient.
In the long run, it will become apparent that the ordered
ring->request_list matches the ring->timeline, a fun challenge for the
future will be unifying the two lists to avoid duplication!
v2: We need both engine-order and ring-order processing to maintain our
knowledge of where individual rings have completed upto as well as
knowing what was last executing on any engine. And finally by decoupling
retiring the contexts on the engine and the timelines along the rings,
we do have to keep a reference to the context on each request
(previously it was guaranteed by the context being pinned).
v3: Not just a reference to the context, but we need to keep it pinned
as we manipulate the rings; i.e. we need a pin for both the manipulation
of the engine state during its retirements, and a separate pin for the
manipulation of the ring state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-3-chris@chris-wilson.co.uk
In commit 9b6586ae9f ("drm/i915: Keep a global seqno per-engine"), we
moved from a global inflight counter to per-engine counters in the
hope that will be easy to run concurrently in future. However, with the
advent of the desire to move requests between engines, we do need a
global counter to preserve the semantics that no engine wraps in the
middle of a submit. (Although this semantic is now only required for gen7
semaphore support, which only supports greater-then comparisons!)
v2: Keep a global counter of all requests ever submitted and force the
reset when it wraps.
References: 9b6586ae9f ("drm/i915: Keep a global seqno per-engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-1-chris@chris-wilson.co.uk
Interrupts other than the one for AUX errors are required only for debug,
so unmask them via debugfs when the user requests debug.
User can make such a request with
echo 1 > <DEBUG_FS>/dri/0/i915_edp_psr_debug
There are no locks to serialize PSR debug enabling from
irq_postinstall() and debugfs for simplicity. As irq_postinstall() is
called only during module initialization/resume and IGT subtests
aren't expected to modify PSR debug at those times, we should be safe.
v2: Unroll loops (Ville)
Avoid resetting error mask bits.
v3: Unmask interrupts in postinstall() if debug was still enabled.
Avoid RMW (Ville)
v4: Avoid extra IMR write introduced in the previous version.(Jose)
Style changes, renames (Jose).
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405013717.24254-1-dhinakaran.pandiyan@intel.com
Today we only want to pass along the priority to engine->schedule(), but
in the future we want to have much more control over the various aspects
of the GPU during a context's execution, for example controlling the
frequency allowed. As we need an ever growing number of parameters for
scheduling, move those into a struct for convenience.
v2: Move the anonymous struct into its own function for legibility and
ye olde gcc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-3-chris@chris-wilson.co.uk
Add a selftest to ensure that we restore the whitelisted registers after
rewrite the registers everytime they might be scrubbed, e.g. module
load, reset and resume. For the other volatile workaround registers, we
export their presence via debugfs and check in igt/gem_workarounds.
However, we don't export the whitelist and rather than do so, let's test
them directly in the kernel.
The test we use is to read the registers back from the CS (this helps us
be sure that the registers will be valid for MI_LRI etc). In order to
generate the expected list, we split intel_whitelist_workarounds_emit
into two phases, the first to build the list and the second to apply.
Inside the test, we only build the list and then check that list against
the hw.
v2: Filter out pre-gen8 as they do not have RING_NONPRIV.
v3: Drop unused engine parameter, no plans to use it now or future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414122754.569-1-chris@chris-wilson.co.uk
Currently, we rely on inspecting the hangcheck state from within the
i915_reset() routines to determine which engines were guilty of the
hang. This is problematic for cases where we want to run
i915_handle_error() and call i915_reset() independently of hangcheck.
Instead of relying on the indirect parameter passing, turn it into an
explicit parameter providing the set of stalled engines which then are
treated as guilty until proven innocent.
While we are removing the implicit stalled parameter, also make the
reason into an explicit parameter to i915_reset(). We still need a
back-channel for i915_handle_error() to hand over the task to the locked
waiter, but let's keep that its own channel rather than incriminate
another.
This leaves stalled/seqno as being private to hangcheck, with no more
nefarious snooping by reset, be it whole-device or per-engine. \o/
The only real issue now is that this makes it crystal clear that we
don't actually do any testing of hangcheck per se in
drv_selftest/live_hangcheck, merely of resets!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180406220354.18911-2-chris@chris-wilson.co.uk
Although i915 don't implement aux sync frame through tests was
findout that pannels can do selective update when the y-coordinate
is also included in SDP, that is why it is required to run PSR2 in
i915.
So moving to only one place the sink requirements that the actual
driver needs to enable PSR2.
Also intel_psr2_config_valid() is called every time the crtc config
is computed, wasting some time every time it was checking for
Y coordinate requirement.
This allow us to nuke y_cord_support and some of VSC setup code that
was handling a scenario that would never happen(PSR2 without Y
coordinate).
Also here renaming intel_dp_get_y_cord_status() to
intel_dp_get_y_coord_required() as it more accurate to the name and
function of bit according to eDP spec.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-4-jose.souza@intel.com
eDP spec states that aux frame is required to do PSR2 selective
update but i915 don't fully implement it. It sends the aux frame
sync messages but the value is always zero as the GTC is not enabled
in driver.
Through tests was findout that pannels can do selective update when
the y-coordinate is also included in SDP, that is why it is required
to run PSR2 in i915.
A dummy value is not useful at all to sink, so removing everything
related to aux frame sync, if GTC is enabled we can bring this back.
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-3-jose.souza@intel.com
After
commit dd9f31c7a3
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Aug 16 17:46:07 2017 +0300
drm/i915/gen9+: Set same power state before hibernation image
save/restore
during hibernation/suspend the power domain functionality got disabled,
after which resume could leave it incorrectly disabled if the ACPI
target state was S0 during suspend and i915 was not loaded by the loader
kernel.
This was caused by not considering if we resumed from hibernation as the
condition for power domains reiniting.
Fix this by simply tracking if we suspended power domains during system
suspend and reinit power domains accordingly during resume. This will
result in reiniting power domains always when resuming from hibernation,
regardless of the platform and whether or not i915 is loaded by the
loader kernel.
The reason we didn't catch this earlier is that the enabled/disabled
state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform
and kernel config dependent: on my SKL the target state is S4
during PMSG_FREEZE and (with the driver loaded in the loader kernel)
S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during
PMSG_FREEZE but (contrary to this) power domains are not initialized
during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or
it's loaded but without the DMC firmware being available.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196
Reported-and-tested-by: amn-bas@hotmail.com
Fixes: dd9f31c7a3 ("drm/i915/gen9+: Set same power state before hibernation image save/restore")
Cc: amn-bas@hotmail.com
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322143642.26883-1-imre.deak@intel.com
Not all callers want the GPU error to handled in the same way, so expose
a control parameter. In the first instance, some callers do not want the
heavyweight error capture so add a bit to request the state to be
captured and saved.
v2: Pass msg down to i915_reset/i915_reset_engine so that we include the
reason for the reset in the dev_notice(), superseding the earlier option
to not print that notice.
v3: Stash the reason inside the i915->gpu_error to handover to the direct
reset from the blocking waiter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-2-chris@chris-wilson.co.uk
Hardware may have specific restrictions on GuC WOPCM offset and size. On
Gen9, the value of the GuC WOPCM size register needs to be larger than the
value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for
reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size
will lead to GuC firmware execution failures. On the other hand, with
current static GuC WOPCM offset and size values (512KB for both offset and
size), the GuC WOPCM size verification will fail on Gen9 even if it can be
fixed by lowering the GuC WOPCM offset by calculating its value based on
HuC firmware size (which is likely less than 200KB on Gen9), so that we can
have a GuC WOPCM size value which is large enough to pass the GuC WOPCM
size check.
This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to
24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support
to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To
meet all above requirements, let's provide dynamic partitioning of the
WOPCM that will be based on platform specific HuC/GuC firmware sizes.
v2:
- Removed intel_wopcm_init (Ville/Sagar/Joonas)
- Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar)
- Removed unnecessary function calls (Joonas)
- Init GuC WOPCM partition as soon as firmware fetching is completed
v3:
- Fixed indentation issues (Chris)
- Removed layering violation code (Chris/Michal)
- Created separat files for GuC wopcm code (Michal)
- Used inline function to avoid code duplication (Michal)
v4:
- Preset the GuC WOPCM top during early GuC init (Chris)
- Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed
v5:
- Moved GuC DMA WOPCM register updating code into intel_wopcm.c
- Took care of the locking status before writing to GuC DMA
Write-Once registers. (Joonas)
v6:
- Made sure the GuC WOPCM size to be multiple of 4K (4K aligned)
v8:
- Updated comments and fixed naming issues (Sagar/Joonas)
- Updated commit message to include more description about the hardware
restriction on GuC WOPCM size (Sagar)
v9:
- Minor changes variable names and code comments (Sagar)
- Added detailed GuC WOPCM layout drawing (Sagar/Michal)
- Refined macro definitions to be reader friendly (Michal)
- Removed redundent check to valid flag (Michal)
- Unified first parameter for exported GuC WOPCM functions (Michal)
- Refined the name and parameter list of hardware restriction checking
functions (Michal)
v10:
- Used shorter function name for internal functions (Joonas)
- Moved init-ealry function into c file (Joonas)
- Consolidated and removed redundant size checks (Joonas/Michal)
- Removed unnecessary unlikely() from code which is only called once
during boot (Joonas)
- More fixes to kernel-doc format and content (Michal)
- Avoided the use of PAGE_MASK for 4K pages (Michal)
- Added error log messages to error paths (Michal)
v11:
- Replaced intel_guc_wopcm with more generic intel_wopcm and attached
intel_wopcm to drm_i915_private instead intel_guc (Michal)
- dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top
offset from GuC WOPCM base) (Michal)
- Moved WOPCM marco definitions into .c source file (Michal)
- Exported WOPCM layout diagram as kernel-doc (Michal)
v12:
- Updated naming, function kernel-doc to align with new changes (Michal)
v13:
- Updated the ordering of s-o-b/cc/r-b tags (Sagar)
- Corrected one tense error in comment (Sagar)
- Corrected typos and removed spurious comments (Joonas)
Bspec: 12690
Signed-off-by: Jackie Li <yaodong.li@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9)
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com
So far we are using frontbuffer tracking for everything
and ignoring that PSR has a HW capable HW tracking for many
modern usages of GPU on Core platforms and newer Atom ones.
One reason for that is that we were trying to keep same
infrastructure in place for VLV/CHV than the rest of platforms.
But also because when this infrastructure was created
the front-buffer-tracking origin wasn't that good and stable
how it is today after Paulo reworked it to attend FBC cases.
However this PSR implementation without HW tracking died
on gen8LP. And newer platforms are starting to demand more HW
tracking specially with PSR2 cases in mind.
By disabling and re-enabling PSR totally every time we believe
someone is going to change the front buffer content we don't
allow PSR HW tracking to do this job and specially compromising
the whole idea of PSR2 case where the HW tracking detect only
the damaged area and do a partial screen update.
So, from now on, on the platforms that has hw_tracking let's
rely more on HW tracking.
This also is the case in used by other drivers and more validated
by SV teams. So I hope that this will lead us to less misterious
bugs.
v2: Only do this for platform that actually has hw tracking.
v3 from DK
Do this only for flips, small gradual changes are better.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307033420.3086-3-dhinakaran.pandiyan@intel.com
