Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
Currently the FRL training mode (Concurrent, Sequential) and
training type (Normal, Extended) are not defined properly and
are passed as bool values in drm_helpers for pcon
configuration for FRL training.
This patch:
-Add register masks for Sequential and Normal FRL training options.
-Fixes the drm_helpers for FRL Training configuration to use the
appropriate masks.
-Modifies the calls to the above drm_helpers in i915/intel_dp as per
the above change.
v2: Re-used the register masks for these options, instead of enum. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-2-ankit.k.nautiyal@intel.com
An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.
The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.
v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com
Save some place in the GTT VMAs by using a u16 instead of unsigned int
to store the view dimensions. The maximum FB stride is 256kB which is
4096 tiles in the worst case (yf-tiles), the maximum FB height is 16k
pixels, which is 16384 tiles in the worst case (linear 4x1 tiled FB).
v2:
- Fix worst case tile height formula in commit log. (Ville)
- Add an assign_chk_ovf helper to simplify the related assignments.
v3:
- Enclose params of the assign_chk_ovf macro in parentheses.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-21-imre.deak@intel.com
Instead of copying separately the GTT remapped and color plane view info
from the FB to the plane state, do this by copying the whole
intel_fb_view struct. For this we make sure the FB view state is fully
inited (that is also including the view type) already during FB
creation, so this init is not required during atomic check time. This
also means the we don't need to reset the unused color plane info during
atomic check, as these are already reset during FB creation.
I noticed that initial FBs will only work atm if they are page aligned
(which BIOS most probably always ensures), but add a comment to sanitize
this part once. Also we won't disable the plane if
get_initial_plane_config() failed for some reason (for instance due to
unsupported rotation), add a TODO: comment for this too.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-19-imre.deak@intel.com
To allow the simplification of FB/plane view computation in the
follow-up patches, unify the corresponding state in the
intel_framebuffer and intel_plane_state structs into a new intel_fb_view
struct.
This adds some overhead to intel_framebuffer as the rotated view will
have now space for 4 color planes instead of the required 2 and it'll
also contain the unused offset for each color_plane info. Imo this is an
acceptable trade-off to get a simplified way of the remap computation.
Use the new intel_fb_view struct for the FB normal view as well, so (in
the follow-up patches) we can remove the special casing for normal view
calculation wrt. the calculation of remapped/rotated views. This also
adds an overhead to the intel_framebuffer struct, as the gtt remap info
and per-color plane offset/pitch is not required for the normal view,
but imo this is an acceptable trade-off as above. The per-color plane
pitch filed will be used by a follow-up patch, so we can retrieve the
pitch for each view in the same way.
No functional changes in this patch.
v2:
- Make the patch have _no functional change_.
(fix skl_check_nv12_aux_surface() and skl_check_main_surface()).
- s/i915_color_plane_view::pitch/stride/ (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-17-imre.deak@intel.com
Factor out to a new function the logic to calculate an FB plane's
normal-view size.
Instead of using intel_remapped_plane_info, which is related only to
remapping, add a helper to get the tile pitch and rows for an FB plane,
so these helpers can be used both by the normal size calculation and the
remapping code.
Also add a new fb_plane_view_dims struct in which we can pass around the
view (either FB plane or plane source) and tile dimensions conveniently
to functions calculating further view parameters.
v2:
- Add back the +1 tile adjustment for x!=0 in calc_plane_normal_size(). (Ville)
- s/pages/tiles/ in calc_plane_normal_size(). (Ville)
- Add a helper for the plane view width calculation. (Ville)
- Return tiles as unsigned int from calc_plane_normal_size().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-16-imre.deak@intel.com
The HW plane state is cleared and inited after we store the rotation to
it, so store it instead to the uapi state to match what we do with all
other plane state until intel_plane_copy_uapi_to_hw_state() is called.
Rotation for initial FBs is not supported atm, but let's still fix the
plane state setup here.
While at it remove the redundant intel_state->uapi.src/dst init, which
will be done in intel_plane_copy_uapi_to_hw_state().
v2: Remove redundant intel_state->uapi.src/dst init. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-2-imre.deak@intel.com
The dbuf bandwidth calculations don't need the planes to be
added to the state. Each plane's data rate has already been
precalculated and stored in the crtc state, and that with
the dbuf slice usage for each plane is all the dbuf bandwidth
code needs to figure out what the minimum cdclk is.
What we're trying to do here is make sure each plane recalculates
its minimum cdclk (ie. plane->min_cdclk()) on those platforms where
the number of active planes affects the result of said calculation.
Nothing to do with any dbuf cdclk requirements.
Not sure if we had stuff in slightly different order or what,
but at least in the current scheme this is not necessary.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325004415.17432-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Update logic to program AUD_FREQ_CNTRL register based on new guidance.
Earlier this register was configured by BIOS and driver discovered the
value at init. This is no longer recommended and instead driver should
set the values based on the hardware revision.
Add the recommended values for all supported hardware. This change applies
for all GEN12+ hardware. For TGL, some special case handling is needed
to not break existing systems.
Extend the debug print to also include values of the register as written
by BIOS. This can help debug rare cases where BIOS has configured the link
settings to incorrect values.
Bspec: 49279
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324123725.4170214-1-kai.vehmanen@linux.intel.com
There are a couple of ioctl's related to tiling and cache placement,
that make no sense for userptr, reject those:
- i915_gem_set_tiling_ioctl()
Tiling should always be linear for userptr. Changing placement will
fail with -ENXIO.
- i915_gem_set_caching_ioctl()
Userptr memory should always be cached. Changing caching mode will
fail with -ENXIO.
- i915_gem_set_domain_ioctl()
Still temporarily allowed to work as intended, it's used to check
userptr validity. With the reworked userptr code, it will keep
working for this usecase.
This plus the previous changes have been tested against beignet
by using its own unit tests, and intel-video-compute by using
piglit's opencl tests.
Changes since v1:
- set_domain was apparently used in iris for checking userptr validity,
keep it working as intended.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-14-maarten.lankhorst@linux.intel.com
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:
@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)
@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)
There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.
v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
ILK is the only platform that we consider "gen5" and SNB is the only
platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then
replace numeric platform tests for these two generations with direct
platform tests with the following Coccinelle semantic patch:
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 5)
+ IS_IRONLAKE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 6)
+ IS_SANDYBRIDGE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN_RANGE(dev_priv, 5, 6)
+ IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv)
This will simplify our upcoming patches which eliminate INTEL_GEN()
usage in the display code.
v2:
- Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville)
- Rebase + regenerate from semantic patch
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
The enabled_planes bitmask was supposed to track logically enabled
planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting
even disabled planes into the bitmask since
intel_plane_atomic_check_with_state() only takes the early exit
if the plane was disabled and stays disabled. I think I misread
the early said codepath to exit whenever the plane is logically
disabled, which is not true.
So let's fix this up properly and set the bit only when the plane
actually is logically enabled.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: ee42ec19ca ("drm/i915: Track logically enabled planes for hw state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit 97bc7ffa1b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The spec requires to use at least 3.2ms for the AUX timeout period if
there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming
spec update makes this more specific, by requiring a 3.2ms minimum
timeout period for the LTTPR detection reading the 0xF0000-0xF0007
range (3.6.5.1).
Accordingly disable LTTPR detection until GLK, where the maximum timeout
we can set is only 1.6ms.
Link training in the non-transparent mode is known to fail at least on
some SKL systems with a WD19 dock on the link, which exposes an LTTPR
(see the References below). While this could have different reasons
besides the too short AUX timeout used, not detecting LTTPRs (and so not
using the non-transparent LT mode) fixes link training on these systems.
While at it add a code comment about the platform specific maximum
timeout values.
v2: Add a comment about the g4x maximum timeout as well. (Ville)
Reported-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com>
Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com
(cherry picked from commit 984982f3ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The enabled_planes bitmask was supposed to track logically enabled
planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting
even disabled planes into the bitmask since
intel_plane_atomic_check_with_state() only takes the early exit
if the plane was disabled and stays disabled. I think I misread
the early said codepath to exit whenever the plane is logically
disabled, which is not true.
So let's fix this up properly and set the bit only when the plane
actually is logically enabled.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: ee42ec19ca ("drm/i915: Track logically enabled planes for hw state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
