Today when the DSI controller is paired with the Combo-PHY it
uses the high-speed (HS) Word clock for its low power (LP)
transmit PPI communication to the DPHY. The interface signaling
only changes state at an Escape clock frequency (i.e. its
effectively running on a virtual Tx Escape clock that is controlled
by counters w/in the controller), but all the interface flops are
running off the HS clock.
This has the following drawbacks:
* It is a deviation from the PPI spec which assumes signaling is
running on a physical Escape clock
* The PV timings are over constrained (HS timed to 312.5MHz vs.
an Escape clock of 20MHz max)
This feature is proposing to change the LP Tx communication between
the controller and the DPHY from a virtual Tx Escape clock to a physical
clock.
To do this we need to program two "M" divisors. One for the usual
DSI_ESC_CLK_DIV and DPHY_ESC_CLK_DIV register and one for MIPIO_DWORD8.
For DSI_ESC_CLK_DIV and DPHY_ESC_CLK_DIV registers the "M" is calculated
as following
Nt = ceil(f_link/160) (theoretical word clock)
Nact = max[3, Nt + (Nt + 1)%2] (actual word clock)
M = Nact * 8
For MIPIO_DWORD8 register, the divisor "M" is calculated as following
M = (Nact - 1)/2
BSpec: 55171
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-11-lucas.demarchi@intel.com
drm-misc-next for 5.14:
UAPI Changes:
* drm: Disable connector force-probing for non-master clients
* drm: Enforce consistency between IN_FORMATS property and cap + related
driver cleanups
* drm/amdgpu: Track devices, process info and fence info via
/proc/<pid>/fdinfo
* drm/ioctl: Mark AGP-related ioctls as legacy
* drm/ttm: Provide tt_shrink file to trigger shrinker via debugfs;
Cross-subsystem Changes:
* fbdev/efifb: Special handling of non-PCI devices
* fbdev/imxfb: Fix error message
Core Changes:
* drm: Add connector helper to attach HDR-metadata property and convert
drivers
* drm: Add connector helper to compare HDR-metadata and convert drivers
* drm: Add conenctor helper to attach colorspace property
* drm: Signal colorimetry in HDMI infoframe
* drm: Support pitch for destination buffers; Add blitter function
with generic format conversion
* drm: Remove struct drm_device.pdev and update legacy drivers
* drm: Remove obsolete DRM_KMS_FB_HELPER config option in core and drivers
* drm: Remove obsolete drm_pci_alloc/drm_pci_free
* drm/aperture: Add helpers for aperture ownership and convert drivers, replaces rsp fbdev helpers
* drm/agp: Mark DRM AGP code as legacy and convert legacy drivers
* drm/atomic-helpers: Cleanups
* drm/dp: Handle downstream port counts of 0 correctly; AUX channel fixes; Use
drm_err_*/drm_dbg_*(); Cleanups
* drm/dp_dual_mode: Use drm_err_*/drm_dbg_*()
* drm/dp_mst: Use drm_err_*/drm_dbg_*(); Use Extended Base Receiver Capability DPCD space
* drm/gem-ttm-helper: Provide helper for dumb_map_offset and convert drivers
* drm/panel: Use sysfs_emit; panel-simple: Use runtime PM, Power up panel
when reading EDID, Cache EDID, Cleanups;
Lms397KF04: DT bindings
* drm/pci: Mark AGP helpers as legacy
* drm/print: Handle NULL for DRM devices gracefully
* drm/scheduler: Change scheduled fence track
* drm/ttm: Don't count SG BOs against pages_limit; Warn about freeing pinned
BOs; Fix error handling if no BO can be swapped out; Move special
handling of non-GEM drivers into vmwgfx; Move page_alignment into
the BO; Set drm-misc as TTM tree in MAINTAINERS; Cleanup
ttm_agp_backend; Add ttm_sys_manager for system domain; Cleanups
Driver Changes:
* drm: Don't set allow_fb_modifiers explictly in drivers
* drm/amdgpu: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages
* drm/ast: Use managed pcim_iomap(); Fix EDID retrieval with DP501
* drm/bridge: MHDP8546: HDCP support + DT bindings, Register DP AUX channel
with userspace; Sil8620: Fix module dependencies; dw-hdmi: Add option to
not load CEC driver; Fix stopping in drm_bridge_chain_pre_enable();
Ti-sn65dsi86: Fix refclk handling, Break GPIO and MIPI-to-eDP into
subdrivers, Use pm_runtime autosuspend, cleanups; It66121: Add
driver + DT bindings; Adv7511: Support I2S IEC958 encoding; Anx7625: fix
power-on delay; Nwi-dsi: Modesetting fixes; Cleanups
* drm/bochs: Support screen blanking
* drm/gma500: Cleanups
* drm/gud: Cleanups
* drm/i915: Use correct max source link rate for MST
* drm/kmb: Cleanups
* drm/meson: Disable dw-hdmi CEC driver
* drm/nouveau: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages; Register AUX adapters after their connectors
* drm/qxl: Fix shadow BO unpin
* drm/radeon: Duplicate some DRM AGP code to uncouple from legacy drivers
* drm/simpledrm: Add a generic DRM driver for simple-framebuffer devices
* drm/tiny: Fix log spam if probe function gets deferred
* drm/vc4: Add support for HDR-metadata property; Cleanups
* drm/virtio: Create dumb BOs as guest blobs;
* drm/vkms: Use managed drmm_universal_plane_alloc(); Add XRGB plane
composition; Add overlay support
* drm/vmwgfx: Enable console with DRM_FBDEV_EMULATION; Fix CPU updates
of coherent multisample surfaces; Remove reservation semaphore; Add
initial SVGA3 support; Support amd64; Use 1-based IDR; Use min_t();
Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YJvkD523evviED01@linux-uq9g.fritz.box
The DDI naming template for display version 12 went A-C, TC1-TC6. With
XE_LPD, that naming scheme for DDI's has now changed to A-E, TC1-TC4.
The XE_LPD design keeps the register offsets and bitfields relating to
the TC outputs in the same location they were previously. The new "D"
and "E" outputs now take the locations that were previously used by TC5
and TC6 outputs, or what we would have considered to be outputs "H" and
"I" under the legacy lettering scheme.
For the most part everything will just work as long as we initialize the
output with the proper 'enum port' value. However we do need to take
care to pick the correct AUX channel when parsing the VBT (e.g., a
reference to 'AUX D' is actually asking us to use the 8th aux channel,
not the fourth). We should also make sure that our encoders and aux
channels are named appropriately so that it's easier to correlate driver
debug messages with the bspec instructions.
v2:
- Update handling of TGL_TRANS_CLK_SEL_PORT. (Jose)
v3:
- Add hpd_pin to handle outputs D and E (Jose)
- Fixed conversion of BIOS port to aux ch for TC ports (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-2-matthew.d.roper@intel.com
Aside from the hardware-managed PG0, XE_LPD has power wells 1-2 and
A-D. These power wells should be enabled/disabled according to the
following dependency tree (enable top to bottom, disable bottom to top):
PG0
|
--PG1--
/ \
PGA --PG2--
/ | \
PGB PGC PGD
PWR_WELL_CTL follows the general ICL/TGL design and places PG A-D in the
bits that would have been PG 6-9 under the old scheme.
PWR_WELL_CTL_{DDI,AUX}'s bit indexing for DDI's A-C and TC1 is the same
as TGL, but DDI-D is placed at index 7 (bits 14 & 15).
v2:
- Squash in LPSP status patch from Uma since it's also a
powerwell-specific change.
Bspec: 49233
Bspec: 49503
Bspec: 49504
Bspec: 49505
Bspec: 49296
Bspec: 50090
Bspec: 53920
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-4-matthew.d.roper@intel.com
When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.
AMDGPU had nearly the exact same issue. This problem description is
therefore copied from my commit message of the AMDGPU patch.
On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210510133349.14491-4-wse@tuxedocomputers.com
Couples the decission between RGB and YCbCr420 mode and the check if the
port clock can archive the required frequency. Other checks and
configuration steps that where previously done in between can also be done
before or after.
This allows for are cleaner implementation of retrying different color
encodings.
A slight change in behaviour occurs with this patch: If YCbCr420 is not
allowed but display is YCbCr420 only it no longer fails, but just prints
an error and tries to fallback on RGB.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210510133349.14491-3-wse@tuxedocomputers.com
