Noticed this while moving all of the VESA backlight code in i915 over to
DRM helpers: it would appear that we calculate the frequency value we want
to write to DP_EDP_BACKLIGHT_FREQ_SET twice even though this value never
actually changes during runtime. So, let's simplify things by just caching
this value in intel_panel.backlight, and re-writing it as-needed.
Changes since v1:
* Wrap panel->backlight.edp.vesa.pwm_freq_pre_divider in
DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP check - Jani
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-2-lyude@redhat.com
This introduces the following function that can exit and activate a psr
source when intel_psr is already enabled.
- intel_psr_pause(): Pause current PSR. It deactivates current psr state.
- intel_psr_resume(): Resume paused PSR. It activates paused psr state.
v2: Address Jose's review comment.
- Remove unneeded changes around the intel_psr_enable().
- Add intel_psr_post_exit() which processes waiting until PSR is idle
and WA for SelectiveFetch.
v3: Address Jose's review comment.
- Rename intel_psr_post_exit() to intel_psr_wait_exit_locked().
- Move WA_1408330847 to intel_psr_disable_locked()
- If the PSR is paused by an explicit intel_psr_paused() call, make the
intel_psr_flush() not to activate PSR.
v4: Address Jose's review comment.
- In order to avoid the scenario of PSR is not active but there is a
scheduled psr->work, it changes the check routine of intel_psr_pause()
for PSR's enablement from "psr->active" to "psr->enable".
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-1-gwan-gyeong.mun@intel.com
Commit 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware
configuration read out") is not allowing fastsets to happen when PSR
states changes but PSR is a feature that can be enabled and disabled
during fastsets.
So here moving the PSR pipe conf checks to a block that is only
executed when checking if HW state matches with requested state, not
during the phase where it checks if fastset is possible or not.
There still a state mismatch not allowing fastsets between states
turning off or on PSR because of crtc_state->infoframes.enable
BIT(DP_SDP_VSC) but at least for now it will allow a fastset between
PSR1 <-> PSR2, that is a case heavilly used by CI due to pipe CRC not
work with PSR2, but the remaning issue will be fixed in a future patch.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-1-jose.souza@intel.com
UAPI Changes:
- Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel)
Driver Changes:
- Fix for Gitlab issues #3293 and #3450:
Avoid kernel crash on older L-shape memory machines
- Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya)
- Fix crash in auto_retire active retire callback due to
misalignment (Stephane)
- Fix overlay active retire callback alignment (Tvrtko)
- Eliminate need to align active retire callbacks (Matt A, Ville,
Daniel)
- Program FF_MODE2 tuning value for all Gen12 platforms (Caz)
- Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi)
- Create stolen memory region from local memory on DG1 (CQ)
- Place PD in LMEM on dGFX (Matt A)
- Use WC when default state object is allocated in LMEM (Venkata)
- Determine the coherent map type based on object location (Venkata)
- Use lmem physical addresses for fb_mmap() on discrete (Mohammed)
- Bypass aperture on fbdev when LMEM is available (Anusha)
- Return error value when displayable BO not in LMEM for dGFX (Mohammed)
- Do release kernel context if breadcrumb measure fails (Janusz)
- Hide modparams for compiled-out features (Tvrtko)
- Apply Wa_22010271021 for all Gen11 platforms (Caz)
- Fix unlikely ref count race in arming the watchdog timer (Tvrtko)
- Check actual RC6 enable status in PMU (Tvrtko)
- Fix a double free in gen8_preallocate_top_level_pdp (Lv)
- Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten)
- Remove erroneous i915_is_ggtt check for
I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten)
- Convert uAPI headers to real kerneldoc (Matt A)
- Clean up kerneldoc warnings headers (Matt A, Maarten)
- Fail driver if LMEM training failed (Matt R)
- Avoid div-by-zero on Gen2 (Ville)
- Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville)
- Remove reference to struct drm_device.pdev (Thomas)
- Increase separation between GuC and execlists code (Chris, Matt B)
- Use might_alloc() (Bernard)
- Split DGFX_FEATURES from GEN12_FEATURES (Lucas)
- Deduplicate Wa_22010271021 programming on (Jose)
- Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko)
- Selftest improvements (Chris, Hsin-Yi, Tvrtko)
- Shuffle around init_memory_region for stolen (Matt)
- Typo fixes (wengjianfeng)
[airlied: fix conflict with fixes in i915_active.c]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com
[why]
Link rate in kHz is what is eventually required to calculate the link
bandwidth, which makes kHz a more generic unit. This should also make
forward-compatibility with new DP standards easier.
[how]
- Replace 'link rate DPCD code' with 'link rate in kHz' when used with
drm_dp_mst_topology_mgr_init()
- Add/remove related DPCD code conversion from/to kHz where applicable
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512210011.8425-2-nikola.cornij@amd.com
The kernel prefers enabling fbc over the initial fb, since this leads to
actual runtime power savings, so if the initial fb is deemed too big
using some heuristic, then we simply skip allocating stolen for it.
However if the kernel is not configured with fbcon then it should be
possible to relax this, since unlike with fbcon the display server
shouldn't preserve it when later replacing it, and so we should be able
to re-use the stolen memory for fbc and friends. This patch is reported
to fix some flicker seen during boot splash on some devices.
v2: s/FRAMEBUFFER_CONSOLE/CONFIG_FRAMEBUFFER_CONSOLE
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526124901.245689-1-matthew.auld@intel.com
XE_LPD brings enhanced underrun recovery: the hardware can somewhat
mitigate underruns by using an interpolated replacement pixel (soft
underrun) or the previous pixel (hard underrun). Furthermore, underruns
can now be caused downstream by the port, even if the pipe itself is
operating properly. The interrupt register and PIPE_STATUS register
give us extra bits to recognize hard/soft underruns and determine
whether the underrun was caused by the port, so we'll use that
information to print some more descriptive errors when underruns occur.
v2:
- Keep ICL's PIPE_STATUS defined separately from the old GMCH pipe
status register. (Ville)
- Only read/clear the PIPE_STATUS register on platforms with
display ver >= 11. (Lucas)
v3:
- Actually enable+unmask all the new underrun interrupts, clear stale
bits out from PIPE_STATUS before enabling the interrupts, report all
FIFO underruns errors at once, rename a bunch of stuff to unconfuse
vs. PIPESTAT. (Ville)
Bspec: 50335
Bspec: 50366
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-2-matthew.d.roper@intel.com
On ADL-P TC cold is exited and blocked when legacy aux is powered,
that is exacly the same of what ICL need for static TC ports.
TODO: When a TBT hub or monitor is connected it will cause TBT and
legacy aux to be powered at the same time, hopefully this will not
cause any issues but if it do, some rework will be needed.
v2:
- skip icl_tc_port_assert_ref_held() warn on, adl-p uses aux to
block TC cold
v3:
- Drop icl_tc_port_assert_ref_held() earlier return for adl_p, not
needed anymore
- Set timeout_expected when enabling aux power well as port could be
disconnected when tc_cold_block() is called
BSpec: 55480
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-2-jose.souza@intel.com
All DPT FB color plane surface base addresses must be 2MB aligned. On
ADL_P this means that the offsets in CCS FB object must be also 2MB
aligned. Adjusting unaligned offsets for these FBs during commit time
(compensating with the x/y offsets) doesn't work, since the big
alignment would most probably lead to an x/y offset mismatch error
between the main and CCS planes.
We can overcome this limitation by remapping CCS FBs, so that each color
plane is at an aligned offset, leaving x/y for each plane unadjusted
during commit and so not causing an x/y mismatch error. However
remapping for CCS FBs will be done as a follow-up, so for now require
that user space allocates the FB obj with properly aligned planes.
v2: s/SZ_2M/512*4k/ for clarity. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524172703.2113058-1-imre.deak@intel.com
Fix table returned when port_clock > 270000:
drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c:752:47: error: variable 'adlp_dkl_phy_dp_ddi_trans_hbr2_hbr3' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
Initial version of the patch had it in a single table, but on second
version the table got split, but we continued to reference just one of
them.
Fixes: ca96288226 ("drm/i915/adl_p: Define and use ADL-P specific DP translation tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521005209.4058702-1-lucas.demarchi@intel.com
The driver currently disables the LTTPR non-transparent link training
mode for sinks with a DPCD_REV<1.4, based on the following description
of the LTTPR DPCD register range in DP standard 2.0 (at the 0xF0000
register description):
""
LTTPR-related registers at DPCD Addresses F0000h through F02FFh are valid
only for DPCD r1.4 (or higher).
"""
The transparent link training mode should still work fine, however the
implementation for this in some retimer FWs seems to be broken, see the
References: link below.
After discussions with DP standard authors the above "DPCD r1.4" does
not refer to the DPCD revision (stored in the DPCD_REV reg at 0x00000),
rather to the "LTTPR field data structure revision" stored in the
0xF0000 reg. An update request has been filed at vesa.org (see
wg/Link/documentComment/3746) for the upcoming v2.1 specification to
clarify the above description along the following lines:
"""
LTTPR-related registers at DPCD Addresses F0000h through F02FFh are
valid only for LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 1.4 (or
higher)
"""
Based on my tests Windows uses the non-transparent link training mode
for DPCD_REV==1.2 sinks as well (so presumably for all DPCD_REVs), and
forcing it to use transparent mode on ICL/TGL platforms leads to the
same LT failure as reported at the References: link.
Based on the above let's assume that the transparent link training mode
is not well tested/supported and align the code to the correct
interpretation of what the r1.4 version refers to.
Reported-and-tested-by: Casey Harkins <caseyharkins@gmail.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3415
Fixes: 264613b406 ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512212809.1234701-1-imre.deak@intel.com
Core Changes:
- drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose).
Driver Changes:
- Display plane clock rates fixes and improvements (Ville).
- Uninint DMC FW loader state during shutdown (Imre).
- Convert snprintf to sysfs_emit (Xuezhi).
- Fix invalid access to ACPI _DSM objects (Takashi).
- A big refactor around how i915 addresses the graphics
and display IP versions. (Matt, Lucas).
- Backlight fix (Lyude).
- Display watermark and DBUF fixes (Ville).
- HDCP fix (Anshuman).
- Improve cases where display is not available (Jose).
- Defeature PSR2 for RKL and ALD-S (Jose).
- VLV DSI panel power fixes and improvements (Hans).
- display-12 workaround (Jose).
- Fix modesetting (Imre).
- Drop redundant address-of op before lttpr_common_caps array (Imre).
- Fix compiler checks (Jose, Jason).
- GLK display fixes (Ville).
- Fix error code returns (Dan).
- eDP novel: back again to slow and wide link training everywhere (Kai-Heng).
- Abstract DMC FW path (Rodrigo).
- Preparation and changes for upcoming
XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh).
- Fix comment typo in DSI code (zuoqilin).
- Simplify CCS and UV plane alignment handling (Imre).
- PSR Fixes on TGL (Gwan-gyeong, Jose).
- Add intel_dp_hdcp.h and rename init (Jani).
- Move crtc and dpll declarations around (Jani).
- Fix pre-skl DP AUX precharge length (Ville).
- Remove stray newlines from random files (Ville).
- crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville).
- Add frontbuffer tracking tracepoints (Ville).
- ADL-S PCI ID updates (Anand).
- Use unique backlight device names (Jani).
- A few clean-ups on i915/audio (Jani).
- Use intel_framebuffer instead of drm one on intel_fb functions (Imre).
- Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre).
- Nuke display error state (Ville).
- ADL-P initial enablement patches
starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika).
- Display clean-up around VBT and the strap bits (Lucas).
- Try YCbCr420 color when RGB fails (Werner).
- More PSR fixes and improvements (Jose).
- Other generic display code clean-up (Jose, Ville).
- Use correct downstream caps for check Src-Ctl mode for PCON (Ankit).
- Disable HiZ Raw Stall Optimization on broken gen7 (Simon).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com
