DC was using compile time initialization of register addresses using
SR_* macros and their variants. These have been converted to use runtime
initialization.
The REG_STRUCT macro is a definition that is added to SR_* macros.
During initialization, this must be defined before SR_* macros are
invoked, which are in turn invoked through various IP initialization macros.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Reprogramming the stream despite no changes in ODM combine mode.
Reprogramming the stream would cause intermittent black screen on
display which could only be recovered through enable/disable sequence.
[HOW]
Fixed bug where we detected a change in ODM combine mode despite ODM
combine mode being disabled. Also removed code which required stream to
be reprogrammed once a change in ODM combine mode was noticed. Lastly we
do not support dynamic ODM switching for HDMI TMDS and FRL on DCN32,
therefore we never want to change its ODM policy.
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When multiple displays are used, the underlying framebuffers could be
two separate framebuffers, or a single large framebuffer. Fix the
calculation logic for CAB to account for large framebuffer. Current
logic assumes that any FB that the plane points to are independent. When
a single FB is used on the system, this does 2 times allocation.
Add a check to prevent duplicate allocation by checking if the base
addresses are the same, and then ensuring that the if we allocate using
the pitch, whole of the other fbs will be accounted for in the first
allocation.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We got a report from Stephen/Michael that the PowerPC build was failing
with the following error:
ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float
ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o
This error happened because of the function optc3_set_vrr_m_const. This
function expects a double as a parameter in a code that is not allowed
to have FPU operations. After further investigation, it became clear
that optc3_set_vrr_m_const was never invoked, so we can safely drop this
function and fix the ld issue.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coding error in DET allocation was resulting in too few DET segments
being allocated, causing underflow.
[How]
Reset pipe count each time we begin iterating through pipes for a stream.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In single display ODM combine mode, two MPO videos ( three
planes ) are not working
[How]
When we detect three planes, don't set odm combine 2to1 policy
for the MPO planes. Otherwise, we run out of pipes available
Add support for two MPO videos in dc_add_plane_to_context().
Don't allow both videos to be on the same side of the
display.
Add extra check when fetching free pipe for two MPO videos.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For any DRR cases in SubVP, don't lock for VSYNC flips
- For DCN32/321 use FW to do DRR manual trigger programming
- Add bit in SubVP cmd to indicate if the SubVP pipe is DRR
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks like many of the code related to SubVP uses FPU operation, and
we have many static functions that are part of this feature. This commit
is a little bit large, but it only moves SubVP operation from one file
to another, and I had to do it in a single change due to dependencies
between functions.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The insert_entry_into_table_sorted function uses FPU operation and calls
other static functions support. This commit moves the insert entry
function with all the required struct and static functions to the FPU
file.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_predict_pipe_split uses FPU operations. This commit
moves this function to the dcn32_fpu file, and we ensure that we only
invoke it under the kernel_fpu protection.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_helper_populate_phantom_dlg_params uses FPU
operations. For this reason, this commit moves this function to the
dcn32_fpu file, and we ensure that we only invoke it under the
kernel_fpu protection.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e7ef5569e71bf3fec01ea513c27c6081c0dbbc64.
Idle optimization was disabled due to SMU and firmware bugs. Enable it
back for DCN32. DCN321 has them enabled already
Fixes: 6a640b95b0 ("drm/amd/display: disable idle optimizations")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Unbounded request logic in resource/DML has some issues where unbounded
request is being enabled incorrectly. SW today enables unbounded request
unconditionally in hardware, on the assumption that HW can always
support it in single pipe scenarios.
This worked until now because the same assumption is made in DML. A new
DML update is needed to fix a bug, where there are single pipe scenarios
where unbounded cannot be enabled, and this change in DML needs to be
ported in, and dcn32 resource logic fixed.
[how]
First, dcn32_resource should program unbounded req in HW according to
unbounded req enablement output from DML, as opposed to DML input.
Second, port in DML update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There are cases where the pipes populated are not all at the top
of the pipes list under context. Loop through all pipes for DET
allocation instead of just the number of populated ones, even if
some unpopulated pipes are iterated through unnecessarily.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VM enabled in IP configuration causes UCLK not
reaching DPM0. The expectation for VM enable should
be that KMD will indicate to DAL when VM is enabled,
then DAL will set the bit accordingly
[How]
Set gpuvm_enable to zero in DCN3_20 and DCN3_21 resource.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For certain MPO configurations, DML will split a pipe after DET buffer has
already been allocated by driver, resulting in allocation of more DET
segments than the configurable return buffer has, causing underflow.
[How]
Determine during DET override calculation whether or not a pipe will be
split later on by DML, and distribute DET segments based on expected
number of pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In general cases we want to keep the dram clock change requirement (we
prefer configs that support MCLK switch). Only override to false for
SubVP.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Output Data Mapping is a power saving feature that allows us to run at
reduced DPP and DISP clocks compared to what could be achieved with a
single pipe.
Set the default policy for single display use case to use 2 to 1 ODM combine.
The options are queried by DC and appropriate register programming sequence
is initiated to enable this feature.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add a missing callback to set DIG FIFO output pixel mode. This is used
when ODM combine is activated.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hwseq.c:428:33: warning: variable 'old_pipe' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The return value indicates whether the operation(disable/enable) succeeded
or not. The existing logic reports wrong result even if the disablement was
performed successfully. That will make succeeding reenablement abandoned
as dc->idle_optimizations_allowed is always true.
[How]
Correct the return value to reflect the real result of disablement.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some parts are consuming dangerously close to maximum number of states
supported when updating the BB (i.e. 8).
[how]
Change maximum stages from 9 to 20.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After some experimental tests, we noticed that we need to set
gpuvm_max_page_table_levels to '4' to meet the hardware requirements.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For Pixel Rate control, when on HDMI, HDMI DTO should be selected
instead of DP DTO.
[How]
Pass HDMI parameter for HDMI stream, and select correct DTO.
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
