Since the code related to 'CURRENT_QM' debugfs is exactly same in
sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the configuration of the total number of queues 'ctrl_qp_num'
from sec2/hpre/zip to qm.c. And get the total number of queues
from the hardware register for Kunpeng930.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
System may be able to get physical address of zero if not reserved by
firmware.
The dma address obtained by 'dma_alloc_coherent' is valid, since already
checking cpu va before, so do not check again.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.
[ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[ 7.180345] Call Trace:
[ 7.182576] mutex_lock+0xc9/0xd0
[ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf]
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 25c6ffb249 ("crypto: qat - check if PF is running")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/cavium/nitrox/nitrox_isr.c:17: warning: expecting prototype for One vector for each type of ring(). Prototype was for NR_RING_VECTORS() instead
drivers/crypto/cavium/nitrox/nitrox_isr.c:224: warning: Function parameter or member 'irq' not described in 'nps_core_int_isr'
drivers/crypto/cavium/nitrox/nitrox_isr.c:224: warning: Function parameter or member 'data' not described in 'nps_core_int_isr'
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'tfm' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'in_key' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'key_len' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: expecting prototype for Nest Accelerators driver(). Prototype was for cbc_aes_nx_set_key() instead
drivers/crypto/nx/nx_debugfs.c:34: warning: Function parameter or member 'drv' not described in 'nx_debugfs_init'
drivers/crypto/nx/nx_debugfs.c:34: warning: expecting prototype for Nest Accelerators driver(). Prototype was for nx_debugfs_init() instead
drivers/crypto/nx/nx.c:31: warning: Incorrect use of kernel-doc format: * nx_hcall_sync - make an H_COP_OP hcall for the passed in op structure
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'nx_ctx' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'op' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'may_sleep' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: expecting prototype for Nest Accelerators driver(). Prototype was for nx_hcall_sync() instead
drivers/crypto/nx/nx.c:209: warning: Function parameter or member 'nbytes' not described in 'trim_sg_list'
Cc: "Breno Leitão" <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kent Yoder <yoder1@us.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/caam/caampkc.c:199: warning: expecting prototype for from a given scatterlist(). Prototype was for caam_rsa_count_leading_zeros() instead
drivers/crypto/caam/caamalg_qi2.c:87: warning: Function parameter or member 'xts_key_fallback' not described in 'caam_ctx'
drivers/crypto/caam/caamalg_qi2.c:87: warning: Function parameter or member 'fallback' not described in 'caam_ctx'
Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/keembay/ocs-hcu.c:107: warning: expecting prototype for struct ocs_hcu_dma_list. Prototype was for struct ocs_hcu_dma_entry instead
drivers/crypto/keembay/ocs-hcu.c:127: warning: expecting prototype for struct ocs_dma_list. Prototype was for struct ocs_hcu_dma_list instead
drivers/crypto/keembay/ocs-hcu.c:610: warning: expecting prototype for ocs_hcu_digest(). Prototype was for ocs_hcu_hash_update() instead
drivers/crypto/keembay/ocs-hcu.c:648: warning: expecting prototype for ocs_hcu_hash_final(). Prototype was for ocs_hcu_hash_finup() instead
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Declan Murphy <declan.murphy@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ones remove here not only fail to conform to kernel-doc, but also
provide no value, so let's remove them completely in this case.
Fixes the following W=1 kernel build warning(s):
drivers/crypto/ux500/hash/hash_core.c:368: warning: Function parameter or member 'ctx' not described in 'hash_get_device_data'
drivers/crypto/ux500/hash/hash_core.c:368: warning: Excess function parameter 'hash_ctx' description in 'hash_get_device_data'
drivers/crypto/ux500/hash/hash_core.c:551: warning: expecting prototype for hash_init(). Prototype was for ux500_hash_init() instead
drivers/crypto/ux500/hash/hash_core.c:592: warning: Function parameter or member 'length' not described in 'hash_processblock'
drivers/crypto/ux500/hash/hash_core.c:1302: warning: expecting prototype for hash_update(). Prototype was for ahash_update() instead
drivers/crypto/ux500/hash/hash_core.c:1322: warning: expecting prototype for hash_final(). Prototype was for ahash_final() instead
drivers/crypto/ux500/hash/hash_core.c:1622: warning: Function parameter or member 'device_data' not described in 'ahash_algs_register_all'
drivers/crypto/ux500/hash/hash_core.c:1622: warning: expecting prototype for hash_algs_register_all(). Prototype was for ahash_algs_register_all() instead
drivers/crypto/ux500/hash/hash_core.c:1647: warning: Function parameter or member 'device_data' not described in 'ahash_algs_unregister_all'
drivers/crypto/ux500/hash/hash_core.c:1647: warning: expecting prototype for hash_algs_unregister_all(). Prototype was for ahash_algs_unregister_all() instead
drivers/crypto/ux500/cryp/cryp.c:19: warning: Incorrect use of kernel-doc format: * cryp_wait_until_done - wait until the device logic is not busy
drivers/crypto/ux500/cryp/cryp.c:22: warning: Function parameter or member 'device_data' not described in 'cryp_wait_until_done'
drivers/crypto/ux500/cryp/cryp.c:22: warning: expecting prototype for ST(). Prototype was for cryp_wait_until_done() instead
drivers/crypto/ux500/cryp/cryp.c:292: warning: Function parameter or member 'cryp_mode' not described in 'cryp_save_device_context'
drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: Function parameter or member 'device_data' not described in 'cryp_enable_irq_src'
drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: Function parameter or member 'irq_src' not described in 'cryp_enable_irq_src'
drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: expecting prototype for ST(). Prototype was for cryp_enable_irq_src() instead
drivers/crypto/ux500/cryp/cryp_core.c:42: warning: expecting prototype for ST(). Prototype was for CRYP_MAX_KEY_SIZE() instead
drivers/crypto/ux500/cryp/cryp_core.c:91: warning: Function parameter or member 'key' not described in 'cryp_ctx'
drivers/crypto/ux500/cryp/cryp_core.c:91: warning: Function parameter or member 'session_id' not described in 'cryp_ctx'
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Shujuan Chen <shujuan.chen@stericsson.com>
Cc: Joakim Bech <joakim.xx.bech@stericsson.com>
Cc: Berne Hebark <berne.herbark@stericsson.com>
Cc: Niklas Hernaeus <niklas.hernaeus@stericsson.com>
Cc: Jonas Linde <jonas.linde@stericsson.com>
Cc: Andreas Westin <andreas.westin@stericsson.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/chelsio/chcr_core.c:2: warning: wrong kernel-doc identifier on line:
drivers/crypto/chelsio/chcr_algo.c:806: warning: Function parameter or member 'wrparam' not described in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'req' description in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'ctx' description in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'qid' description in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'op_type' description in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:1566: warning: Function parameter or member 'req' not described in 'create_hash_wr'
drivers/crypto/chelsio/chcr_algo.c:1566: warning: Function parameter or member 'param' not described in 'create_hash_wr'
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Cc: Rohit Maheshwari <rohitm@chelsio.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Manoj Malviya <manojmalviya@chelsio.com>
Cc: Atul Gupta <atul.gupta@chelsio.com>
Cc: Jitendra Lulla <jlulla@chelsio.com>
Cc: M R Gowda <yeshaswi@chelsio.com>
Cc: Harsh Jain <harsh@chelsio.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/bcm/util.c:136: warning: Function parameter or member 'from_nents' not described in 'spu_msg_sg_add'
drivers/crypto/bcm/util.c:136: warning: Function parameter or member 'length' not described in 'spu_msg_sg_add'
drivers/crypto/bcm/spu.c:464: warning: Excess function parameter 'Return' description in 'spum_gcm_ccm_pad_len'
drivers/crypto/bcm/spu.c:524: warning: Function parameter or member 'iv_len' not described in 'spum_aead_ivlen'
drivers/crypto/bcm/spu.c:524: warning: expecting prototype for spu_aead_ivlen(). Prototype was for spum_aead_ivlen() instead
drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'alg_digest_size' not described in 'spum_digest_size'
drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'alg' not described in 'spum_digest_size'
drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'htype' not described in 'spum_digest_size'
drivers/crypto/bcm/spu.c:583: warning: bad line:
drivers/crypto/bcm/spu.c:927: warning: Function parameter or member 'is_inbound' not described in 'spum_cipher_req_finish'
drivers/crypto/bcm/spu.c:927: warning: Excess function parameter 'isInbound' description in 'spum_cipher_req_finish'
drivers/crypto/bcm/spu2.c:557: warning: Function parameter or member 'fmd' not described in 'spu2_fmd_init'
drivers/crypto/bcm/spu2.c:557: warning: Function parameter or member 'spu2_type' not described in 'spu2_fmd_init'
drivers/crypto/bcm/spu2.c:557: warning: Excess function parameter 'spu2_cipher_type' description in 'spu2_fmd_init'
drivers/crypto/bcm/spu2.c:615: warning: Function parameter or member 'auth_first' not described in 'spu2_fmd_ctrl0_write'
drivers/crypto/bcm/spu2.c:615: warning: Excess function parameter 'authFirst' description in 'spu2_fmd_ctrl0_write'
drivers/crypto/bcm/spu2.c:666: warning: Function parameter or member 'is_inbound' not described in 'spu2_fmd_ctrl1_write'
drivers/crypto/bcm/spu2.c:803: warning: expecting prototype for spu_payload_length(). Prototype was for spu2_payload_length() instead
drivers/crypto/bcm/spu2.c:825: warning: Function parameter or member 'is_hash' not described in 'spu2_response_hdr_len'
drivers/crypto/bcm/spu2.c:825: warning: expecting prototype for spu_response_hdr_len(). Prototype was for spu2_response_hdr_len() instead
drivers/crypto/bcm/spu2.c:843: warning: expecting prototype for spu_hash_pad_len(). Prototype was for spu2_hash_pad_len() instead
drivers/crypto/bcm/spu2.c:855: warning: Function parameter or member 'cipher_mode' not described in 'spu2_gcm_ccm_pad_len'
drivers/crypto/bcm/spu2.c:855: warning: Function parameter or member 'data_size' not described in 'spu2_gcm_ccm_pad_len'
drivers/crypto/bcm/spu2.c:855: warning: expecting prototype for spu2_gcm_ccm_padlen(). Prototype was for spu2_gcm_ccm_pad_len() instead
drivers/crypto/bcm/spu2.c:872: warning: expecting prototype for spu_assoc_resp_len(). Prototype was for spu2_assoc_resp_len() instead
drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'alg_digest_size' not described in 'spu2_digest_size'
drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'alg' not described in 'spu2_digest_size'
drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'htype' not described in 'spu2_digest_size'
drivers/crypto/bcm/spu2.c:945: warning: expecting prototype for spu_create_request(). Prototype was for spu2_create_request() instead
drivers/crypto/bcm/spu2.c:1122: warning: expecting prototype for spu_cipher_req_init(). Prototype was for spu2_cipher_req_init() instead
drivers/crypto/bcm/spu2.c:1182: warning: Function parameter or member 'is_inbound' not described in 'spu2_cipher_req_finish'
drivers/crypto/bcm/spu2.c:1182: warning: expecting prototype for spu_cipher_req_finish(). Prototype was for spu2_cipher_req_finish() instead
drivers/crypto/bcm/spu2.c:1243: warning: expecting prototype for spu_request_pad(). Prototype was for spu2_request_pad() instead
drivers/crypto/bcm/spu2.c:1321: warning: expecting prototype for spu_status_process(). Prototype was for spu2_status_process() instead
drivers/crypto/bcm/cipher.c:1048: warning: Function parameter or member 'req' not described in 'spu_aead_rx_sg_create'
drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'cipher' not described in 'rfc4543_gcm_esp_setkey'
drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'key' not described in 'rfc4543_gcm_esp_setkey'
drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'keylen' not described in 'rfc4543_gcm_esp_setkey'
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Rice <rob.rice@broadcom.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Multiple threads or clients can submit a command to the TEE ring
buffer. This patch helps to synchronize command submission to the
ring.
One thread shall write a command to a TEE ring buffer entry only if:
- Trusted OS has notified that the TEE command for the given entry
has been processed and driver has copied the TEE response into
client buffer.
- The command entry is empty and can be written into.
After a command has been written to the TEE ring buffer, the global
wptr (mutex protected) shall be incremented for use by next client.
If PSP became unresponsive while processing TEE request from a
client, then further command submission to queue will be disabled.
Fixes: 33960acccf (crypto: ccp - add TEE support for Raven Ridge)
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PSP TEE device driver polls the command status variable every
5ms to check for command completion. Reduce this time to 1ms so that
there is an improvement in driver response time to clients which submit
TEE commands.
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.delete the original complex method of obtaining the
current device and replace it with the initialized
device pointer.
2.fixes some coding style
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As of commit bb475230b8 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.
This allows to unconditionally return errors from
devm_reset_control_get_optional_exclusive.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DMA_TO_DEVICE synchronisation must be done after the last modification
of the memory region by the software and before it is handed off to
the device.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'dma_mapping_error' return a negative value if 'dma_addr' is equal to
'DMA_MAPPING_ERROR' not zero, so fix initialization of 'dma_addr'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. crypto and crypto/atmel-ecc:
Move curve id of ECDH from the key into the algorithm name instead
in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh'
to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh';
2. crypto/testmgr and net/bluetooth:
Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt
the modification.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A new generation of accelerator Kunpeng930 has appeared, and the
corresponding driver needs to be updated to support some new
algorithms of Kunpeng930. To be compatible with Kunpeng920, we
add parameter 'struct hisi_qm *qm' to sec_algs_(un)register to
identify the chip's version.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If SEV has been disabled (e.g. through BIOS), the driver probe will still
issue SEV firmware commands. The SEV INIT firmware command will return an
error in this situation, but the error code is a general error code that
doesn't highlight the exact reason.
Add a check for X86_FEATURE_SEV in sev_dev_init() and emit a meaningful
message and skip attempting to initialize the SEV firmware if the feature
is not enabled. Since building the SEV code is dependent on X86_64, adding
the check won't cause any build problems.
Cc: John Allen <john.allen@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-By: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the case where the dma_iv mapping fails, the return error path leaks
the memory allocated to object d. Fix this by adding a new error return
label and jumping to this to ensure d is free'd before the return.
Addresses-Coverity: ("Resource leak")
Fixes: ac2614d721 ("crypto: sun8i-ss - Add support for the PRNG")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In one of the error paths of the for_each_child_of_node() loop,
add missing call to of_node_put().
Fix the following coccicheck warning:
./drivers/crypto/nx/nx-common-powernv.c:927:1-23: WARNING: Function
"for_each_child_of_node" should have of_node_put() before return around
line 936.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver for Slim Security Subsystem (SlimSSS) on Exynos5433 takes two
clocks - aclk (AXI/AHB clock) and pclk (APB/Advanced Peripheral Bus
clock). The "aclk", as main high speed bus clock, is enabled first. Then
the "pclk" is enabled.
However the driver assigned reversed names for lookup of these clocks
from devicetree, so effectively the "pclk" was enabled first.
Although it might not matter in reality, the correct order is to enable
first main/high speed bus clock - "aclk". Also this was the intention
of the actual code.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
totallen is used to get the size of the data to be transformed.
This is also available via nbytes or cryptlen in the qce_sha_reqctx
and qce_cipher_ctx. Similarly offset convey nothing for the supported
encryption and authentication transformations and is always 0.
Remove these two redundant parameters in qce_start.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The following are the conditions for requesting AES fallback cipher.
- AES-192
- AES-XTS request with len <= 512 byte (Allow messages of length
less than 512 bytes for all other AES encryption algorithms other
than AES XTS)
- AES-XTS request with len > QCE_SECTOR_SIZE and is not a multiple
of it
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ECB/CBC encryption/decryption requires the data to be blocksize aligned.
Crypto engine hangs on non-block sized operations for these algorithms.
Return invalid data if data size is not blocksize aligned for these
algorithms.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
