Extend CPUID emulation to support XFD, AMX_TILE, AMX_INT8 and
AMX_BF16. Adding those bits into kvm_cpu_caps finally activates all
previous logics in this series.
Hide XFD on 32bit host kernels. Otherwise it leads to a weird situation
where KVM tells userspace to migrate MSR_IA32_XFD and then rejects
attempts to read/write the MSR.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-17-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two XCR0 bits are defined for AMX to support XSAVE mechanism. Bit 17
is for tilecfg and bit 18 is for tiledata.
The value of XCR0[17:18] is always either 00b or 11b. Also, SDM
recommends that only 64-bit operating systems enable Intel AMX by
setting XCR0[18:17]. 32-bit host kernel never sets the tile bits in
vcpu->arch.guest_supported_xcr0.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-16-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest IA32_XFD_ERR is generally modified in two places:
- Set by CPU when #NM is triggered;
- Cleared by guest in its #NM handler;
Intercept #NM for the first case when a nonzero value is written
to IA32_XFD. Nonzero indicates that the guest is willing to do
dynamic fpstate expansion for certain xfeatures, thus KVM needs to
manage and virtualize guest XFD_ERR properly. The vcpu exception
bitmap is updated in XFD write emulation according to guest_fpu::xfd.
Save the current XFD_ERR value to the guest_fpu container in the #NM
VM-exit handler. This must be done with interrupt disabled, otherwise
the unsaved MSR value may be clobbered by host activity.
The saving operation is conducted conditionally only when guest_fpu:xfd
includes a non-zero value. Doing so also avoids misread on a platform
which doesn't support XFD but #NM is triggered due to L1 interception.
Queueing #NM to the guest is postponed to handle_exception_nmi(). This
goes through the nested_vmx check so a virtual vmexit is queued instead
when #NM is triggered in L2 but L1 wants to intercept it.
Restore the host value (always ZERO outside of the host #NM
handler) before enabling interrupt.
Restore the guest value from the guest_fpu container right before
entering the guest (with interrupt disabled).
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-13-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When XFD causes an instruction to generate #NM, IA32_XFD_ERR
contains information about which disabled state components are
being accessed. The #NM handler is expected to check this
information and then enable the state components by clearing
IA32_XFD for the faulting task (if having permission).
If the XFD_ERR value generated in guest is consumed/clobbered
by the host before the guest itself doing so, it may lead to
non-XFD-related #NM treated as XFD #NM in host (due to non-zero
value in XFD_ERR), or XFD-related #NM treated as non-XFD #NM in
guest (XFD_ERR cleared by the host #NM handler).
Introduce a new field in fpu_guest to save the guest xfd_err value.
KVM is expected to save guest xfd_err before interrupt is enabled
and restore it right before entering the guest (with interrupt
disabled).
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-12-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel's eXtended Feature Disable (XFD) feature allows the software
to dynamically adjust fpstate buffer size for XSAVE features which
have large state.
Because guest fpstate has been expanded for all possible dynamic
xstates at KVM_SET_CPUID2, emulation of the IA32_XFD MSR is
straightforward. For write just call fpu_update_guest_xfd() to
update the guest fpu container once all the sanity checks are passed.
For read simply return the cached value in the container.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-11-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM can request fpstate expansion in two approaches:
1) When intercepting guest updates to XCR0 and XFD MSR;
2) Before vcpu runs (e.g. at KVM_SET_CPUID2);
The first option doesn't waste memory for legacy guest if it doesn't
support XFD. However doing so introduces more complexity and also
imposes an order requirement in the restoring path, i.e. XCR0/XFD
must be restored before XSTATE.
Given that the agreement is to do the static approach. This is
considered a better tradeoff though it does waste 8K memory for
legacy guest if its CPUID includes dynamically-enabled xfeatures.
Successful fpstate expansion requires userspace VMM to acquire
guest xstate permissions before calling KVM_SET_CPUID2.
Also take the chance to adjust the indent in kvm_set_cpuid().
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-9-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest support for dynamically enabled FPU features requires a few
modifications to the enablement function which is currently invoked from
the #NM handler:
1) Use guest permissions and sizes for the update
2) Update fpu_guest state accordingly
3) Take into account that the enabling can be triggered either from a
running guest via XSETBV and MSR_IA32_XFD write emulation or from
a guest restore. In the latter case the guests fpstate is not the
current tasks active fpstate.
Split the function and implement the guest mechanics throughout the
callchain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-7-yang.zhong@intel.com>
[Add 32-bit stub for __xfd_enable_feature. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vCPU threads are different from native tasks regarding to the initial XFD
value. While all native tasks follow a fixed value (init_fpstate::xfd)
established by the FPU core at boot, vCPU threads need to obey the reset
value (i.e. ZERO) defined by the specification, to meet the expectation of
the guest.
Let the caller supply an argument and adjust the host and guest related
invocations accordingly.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GZIP-compressed files end with 4 byte data that represents the size
of the original input. The decompressors (the self-extracting kernel)
exploit it to know the vmlinux size beforehand. To mimic the GZIP's
trailer, Kbuild provides cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}.
Unfortunately these macros are used everywhere despite the appended
size data is only useful for the decompressors.
There is no guarantee that such hand-crafted trailers are safely ignored.
In fact, the kernel refuses compressed initramdfs with the garbage data.
That is why usr/Makefile overrides size_append to make it no-op.
To limit the use of such broken compressed files, this commit renames
the existing macros as follows:
cmd_bzip2 --> cmd_bzip2_with_size
cmd_lzma --> cmd_lzma_with_size
cmd_lzo --> cmd_lzo_with_size
cmd_lz4 --> cmd_lz4_with_size
cmd_xzkern --> cmd_xzkern_with_size
cmd_zstd22 --> cmd_zstd22_with_size
To keep the decompressors working, I updated the following Makefiles
accordingly:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/mips/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/x86/boot/compressed/Makefile
I reused the current macro names for the normal usecases; they produce
the compressed data in the proper format.
I did not touch the following:
arch/arc/boot/Makefile
arch/arm64/boot/Makefile
arch/csky/boot/Makefile
arch/mips/boot/Makefile
arch/riscv/boot/Makefile
arch/sh/boot/Makefile
kernel/Makefile
This means those Makefiles will stop appending the size data.
I dropped the 'override size_append' hack from usr/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
Pull xen updates from Juergen Gross:
- a fix for the Xen gntdev driver
- a fix for running as Xen dom0 booted via EFI and the EFI framebuffer
being located above 4GB
- a series for support of mapping other guest's memory by using zone
device when running as Xen guest on Arm
* tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
dt-bindings: xen: Clarify "reg" purpose
arm/xen: Read extended regions from DT and init Xen resource
xen/unpopulated-alloc: Add mechanism to use Xen resource
xen/balloon: Bring alloc(free)_xenballooned_pages helpers back
arm/xen: Switch to use gnttab_setup_auto_xlat_frames() for DT
xen/unpopulated-alloc: Drop check for virt_addr_valid() in fill_list()
xen/x86: obtain upper 32 bits of video frame buffer address for Dom0
xen/gntdev: fix unmap notification order
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
Pull perf updates from Borislav Petkov:
"Cleanup of the perf/kvm interaction."
* tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Drop guest callback (un)register stubs
KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c
KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y
KVM: arm64: Convert to the generic perf callbacks
KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c
KVM: Move x86's perf guest info callbacks to generic KVM
KVM: x86: More precisely identify NMI from guest when handling PMI
KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable
perf/core: Use static_call to optimize perf_guest_info_callbacks
perf: Force architectures to opt-in to guest callbacks
perf: Add wrappers for invoking guest callbacks
perf/core: Rework guest callbacks to prepare for static_call support
perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv
perf: Stop pretending that perf can handle multiple guest callbacks
KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
perf: Protect perf_guest_cbs with RCU
The LKP robot reported that commit in Fixes: caused a failure. Turns out
the ldt_gdt_32 selftest turns into an infinite loop trying to clear the
segment.
As discovered by Sean, what happens is that PARANOID_EXIT_TO_KERNEL_MODE
in the handle_exception_return path overwrites the entry stack data with
the task stack data, restoring the "bad" segment value.
Instead of having the exception retry the instruction, have it emulate
the full instruction. Replace EX_TYPE_POP_ZERO with EX_TYPE_POP_REG
which will do the equivalent of: POP %reg; MOV $imm, %reg.
In order to encode the segment registers, add them as registers 8-11 for
32-bit.
By setting regs->[defg]s the (nested) RESTORE_REGS will pop this value
at the end of the exception handler and by increasing regs->sp, it will
have skipped the stack slot.
This was debugged by Sean Christopherson <seanjc@google.com>.
[ bp: Add EX_REG_GS too. ]
Fixes: aa93e2ad74 ("x86/entry_32: Remove .fixup usage")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/Yd1l0gInc4zRcnt/@hirez.programming.kicks-ass.net
Pull missed x86 build updates from Borislav Petkov:
"In the heat of the battle between me and the tip pull requests, I've
sent you the tip:x86/build branch without the two top-most commits
from Ingo (it appears I hadn't fast-forwarded my local branch, sorry
about that).
Therefore, here's a part 2 of x86/build for 5.17.
- Make x86 defconfigs more useful by enabling
CONFIG_LOCALVERSION_AUTO and CONFIG_KALLSYMS_ALL
And while you merge that, I'll be at the blackboard, writing:
I will always fast-forward local branches before tagging and sending pull requests to Linus.
I will always fast-forward local branches before tagging and sending pull requests to Linus.
I will always fast-forward local branches before tagging and sending pull requests..."
* tag 'x86_build_for_v5.17_rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kbuild: Enable CONFIG_KALLSYMS_ALL=y in the defconfigs
x86/defconfig: Enable CONFIG_LOCALVERSION_AUTO=y in the defconfig
Pull EFI updates from Ard Biesheuvel:
- support taking the measurement of the initrd when loaded via the
LoadFile2 protocol
- kobject API cleanup from Greg
- some header file whitespace fixes
* tag 'efi-next-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: use default_groups in kobj_type
efi/libstub: measure loaded initrd info into the TPM
efi/libstub: consolidate initrd handling across architectures
efi/libstub: x86/mixed: increase supported argument count
efi/libstub: add prototype of efi_tcg2_protocol::hash_log_extend_event()
include/linux/efi.h: Remove unneeded whitespaces before tabs
Pull UML updates from Richard Weinberger:
- set_fs removal
- Devicetree support
- Many cleanups from Al
- Various virtio and build related fixes
* tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (31 commits)
um: virtio_uml: Allow probing from devicetree
um: Add devicetree support
um: Extract load file helper from initrd.c
um: remove set_fs
hostfs: Fix writeback of dirty pages
um: Use swap() to make code cleaner
um: header debriding - sigio.h
um: header debriding - os.h
um: header debriding - net_*.h
um: header debriding - mem_user.h
um: header debriding - activate_ipi()
um: common-offsets.h debriding...
um, x86: bury crypto_tfm_ctx_offset
um: unexport handle_page_fault()
um: remove a dangling extern of syscall_trace()
um: kill unused cpu()
uml/i386: missing include in barrier.h
um: stop polluting the namespace with registers.h contents
logic_io instance of iounmap() needs volatile on argument
um: move amd64 variant of mmap(2) to arch/x86/um/syscalls_64.c
...
Pull hwmon updates from Guenter Roeck:
"New drivers:
- PMBus driver for MPS Multi-phase mp5023
- PMBus driver for Delta AHE-50DC fan control module
- Driver for NZXT RGB&Fan Controller/Smart Device v2
- Driver for Texas Instruments INA238
- Driver to support X370 Asus WMI
- Driver to support B550 Asus WMI
Other notable changes:
- Cleanup of ntc_thermistor driver, and added support for Samsung
1404-001221 NTC
- Improve detection of LM84, MAX1617, and MAX1617A in adm1021 driver
- Clean up tmp401 driver, and convert to with_info API
- Add support for regulators and IR38060, IR38164 IR38263 to ir38064
PMBus driver
- Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh to
k10temp driver
- Add support for F81966 to f71882fg driver
- Add support for ONSEMI N34TS04 to jc42 driver
- Clean up and simplify dell-smm driver
- Add support for ROG STRIX B550-A/X570-I GAMING to nct6775 driver
And various other minor improvements and fixes"
* tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
hwmon: (nzxt-smart2) make array detect_fans_report static const
hwmon: (xgene-hwmon) Add free before exiting xgene_hwmon_probe
hwmon: (nzxt-smart2) Fix "unused function" warning
hwmon: (dell-smm) Pack the whole smm_regs struct
hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage
hwmon: (mr75203) fix wrong power-up delay value
hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible"
hwmon/pmbus: (ir38064) Expose a regulator
hwmon/pmbus: (ir38064) Add of_match_table
hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263
hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING
hwmon: (pmbus) Add support for MPS Multi-phase mp5023
dt-bindings: add Delta AHE-50DC fan control module
hwmon: (pmbus) Add Delta AHE-50DC fan control module driver
hwmon: prefix kernel-doc comments for structs with struct
hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC
hwmon: (ntc_thermistor) Drop OF dependency
hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked()
hwmon: (dell-smm) Simplify ioctl handler
...
Pull crypto updates from Herbert Xu:
"Algorithms:
- Drop alignment requirement for data in aesni
- Use synchronous seeding from the /dev/random in DRBG
- Reseed nopr DRBGs every 5 minutes from /dev/random
- Add KDF algorithms currently used by security/DH
- Fix lack of entropy on some AMD CPUs with jitter RNG
Drivers:
- Add support for the D1 variant in sun8i-ce
- Add SEV_INIT_EX support in ccp
- PFVF support for GEN4 host driver in qat
- Compression support for GEN4 devices in qat
- Add cn10k random number generator support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits)
crypto: af_alg - rewrite NULL pointer check
lib/mpi: Add the return value check of kcalloc()
crypto: qat - fix definition of ring reset results
crypto: hisilicon - cleanup warning in qm_get_qos_value()
crypto: kdf - select SHA-256 required for self-test
crypto: x86/aesni - don't require alignment of data
crypto: ccp - remove unneeded semicolon
crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
crypto: s390/sha512 - Use macros instead of direct IV numbers
crypto: sparc/sha - remove duplicate hash init function
crypto: powerpc/sha - remove duplicate hash init function
crypto: mips/sha - remove duplicate hash init function
crypto: sha256 - remove duplicate generic hash init function
crypto: jitter - add oversampling of noise source
MAINTAINERS: update SEC2 driver maintainers list
crypto: ux500 - Use platform_get_irq() to get the interrupt
crypto: hisilicon/qm - disable qm clock-gating
crypto: omap-aes - Fix broken pm_runtime_and_get() usage
MAINTAINERS: update caam crypto driver maintainers list
crypto: octeontx2 - prevent underflow in get_cores_bmap()
...
Pull KCSAN updates from Paul McKenney:
"This provides KCSAN fixes and also the ability to take memory barriers
into account for weakly-ordered systems. This last can increase the
probability of detecting certain types of data races"
* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
kcsan: Avoid nested contexts reading inconsistent reorder_access
kcsan: Turn barrier instrumentation into macros
kcsan: Make barrier tests compatible with lockdep
kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
compiler_attributes.h: Add __disable_sanitizer_instrumentation
objtool, kcsan: Remove memory barrier instrumentation from noinstr
objtool, kcsan: Add memory barrier instrumentation to whitelist
sched, kcsan: Enable memory barrier instrumentation
mm, kcsan: Enable barrier instrumentation
x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
asm-generic/bitops, kcsan: Add instrumentation for barriers
locking/atomics, kcsan: Add instrumentation for barriers
locking/barriers, kcsan: Support generic instrumentation
locking/barriers, kcsan: Add instrumentation for barriers
kcsan: selftest: Add test case to check memory barrier instrumentation
kcsan: Ignore GCC 11+ warnings about TSan runtime support
kcsan: test: Add test cases for memory barrier instrumentation
kcsan: test: Match reordered or normal accesses
...
Some BIOS-es contain a bug where they add addresses which map to system
RAM in the PCI host bridge window returned by the ACPI _CRS method, see
commit 4dc2287c18 ("x86: avoid E820 regions when allocating address
space").
To work around this bug Linux excludes E820 reserved addresses when
allocating addresses from the PCI host bridge window since 2010.
Recently (2019) some systems have shown-up with E820 reservations which
cover the entire _CRS returned PCI bridge memory window, causing all
attempts to assign memory to PCI BARs which have not been setup by the
BIOS to fail. For example here are the relevant dmesg bits from a
Lenovo IdeaPad 3 15IIL 81WE:
[mem 0x000000004bc50000-0x00000000cfffffff] reserved
pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window]
The ACPI specifications appear to allow this new behavior:
The relationship between E820 and ACPI _CRS is not really very clear.
ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means:
This range of addresses is in use or reserved by the system and is
not to be included in the allocatable memory pool of the operating
system's memory manager.
and it may be used when:
The address range is in use by a memory-mapped system device.
Furthermore, sec 15.2 says:
Address ranges defined for baseboard memory-mapped I/O devices, such
as APICs, are returned as reserved.
A PCI host bridge qualifies as a baseboard memory-mapped I/O device,
and its apertures are in use and certainly should not be included in
the general allocatable pool, so the fact that some BIOS-es reports
the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug.
So it seems that the excluding of E820 reserved addresses is a mistake.
Ideally Linux would fully stop excluding E820 reserved addresses,
but then the old systems this was added for will regress.
Instead keep the old behavior for old systems, while ignoring
the E820 reservations for any systems from now on.
Old systems are defined here as BIOS year < 2018, this was chosen to make
sure that E820 reservations will not be used on the currently affected
systems, while at the same time also taking into account that the systems
for which the E820 checking was originally added may have received BIOS
updates for quite a while (esp. CVE related ones), giving them a more
recent BIOS year then 2010.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793
BugLink: https://bugs.launchpad.net/bugs/1878279
BugLink: https://bugs.launchpad.net/bugs/1931715
BugLink: https://bugs.launchpad.net/bugs/1932069
BugLink: https://bugs.launchpad.net/bugs/1921649
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull power management updates from Rafael Wysocki:
"The most signigicant change here is the addition of a new cpufreq
'P-state' driver for AMD processors as a better replacement for the
venerable acpi-cpufreq driver.
There are also other cpufreq updates (in the core, intel_pstate, ARM
drivers), PM core updates (mostly related to adding new macros for
declaring PM operations which should make the lives of driver
developers somewhat easier), and a bunch of assorted fixes and
cleanups.
Summary:
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas
Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector
Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano)"
* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
cpuidle: use default_groups in kobj_type
x86: intel_epb: Allow model specific normal EPB value
MAINTAINERS: Add AMD P-State driver maintainer entry
Documentation: amd-pstate: Add AMD P-State driver introduction
cpufreq: amd-pstate: Add AMD P-State performance attributes
cpufreq: amd-pstate: Add AMD P-State frequencies attributes
cpufreq: amd-pstate: Add boost mode support for AMD P-State
cpufreq: amd-pstate: Add trace for AMD P-State module
cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
cpufreq: amd-pstate: Add fast switch function for AMD P-State
cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
ACPI: CPPC: Add CPPC enable register function
ACPI: CPPC: Check present CPUs for determining _CPC is valid
ACPI: CPPC: Implement support for SystemIO registers
x86/msr: Add AMD CPPC MSR definitions
x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
cpufreq: use default_groups in kobj_type
...
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
Pull slab updates from Vlastimil Babka:
- Separate struct slab from struct page - an offshot of the page folio
work.
Struct page fields used by slab allocators are moved from struct page
to a new struct slab, that uses the same physical storage. Similar to
struct folio, it always is a head page. This brings better type
safety, separation of large kmalloc allocations from true slabs, and
cleanup of related objcg code.
- A SLAB_MERGE_DEFAULT config optimization.
* tag 'slab-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (33 commits)
mm/slob: Remove unnecessary page_mapcount_reset() function call
bootmem: Use page->index instead of page->freelist
zsmalloc: Stop using slab fields in struct page
mm/slub: Define struct slab fields for CONFIG_SLUB_CPU_PARTIAL only when enabled
mm/slub: Simplify struct slab slabs field definition
mm/sl*b: Differentiate struct slab fields by sl*b implementations
mm/kfence: Convert kfence_guarded_alloc() to struct slab
mm/kasan: Convert to struct folio and struct slab
mm/slob: Convert SLOB to use struct slab and struct folio
mm/memcg: Convert slab objcgs from struct page to struct slab
mm: Convert struct page to struct slab in functions used by other subsystems
mm/slab: Finish struct page to struct slab conversion
mm/slab: Convert most struct page to struct slab by spatch
mm/slab: Convert kmem_getpages() and kmem_freepages() to struct slab
mm/slub: Finish struct page to struct slab conversion
mm/slub: Convert most struct page to struct slab by spatch
mm/slub: Convert pfmemalloc_match() to take a struct slab
mm/slub: Convert __free_slab() to use struct slab
mm/slub: Convert alloc_slab_page() to return a struct slab
mm/slub: Convert print_page_info() to print_slab_info()
...
Pull random number generator updates from Jason Donenfeld:
"These a bit more numerous than usual for the RNG, due to folks
resubmitting patches that had been pending prior and generally renewed
interest.
There are a few categories of patches in here:
1) Dominik Brodowski and I traded a series back and forth for a some
weeks that fixed numerous issues related to seeds being provided
at extremely early boot by the firmware, before other parts of the
kernel or of the RNG have been initialized, both fixing some
crashes and addressing correctness around early boot randomness.
One of these is marked for stable.
2) I replaced the RNG's usage of SHA-1 with BLAKE2s in the entropy
extractor, and made the construction a bit safer and more
standard. This was sort of a long overdue low hanging fruit, as we
were supposed to have phased out SHA-1 usage quite some time ago
(even if all we needed here was non-invertibility). Along the way
it also made extraction 131% faster. This required a bit of
Kconfig and symbol plumbing to make things work well with the
crypto libraries, which is one of the reasons why I'm sending you
this pull early in the cycle.
3) I got rid of a truly superfluous call to RDRAND in the hot path,
which resulted in a whopping 370% increase in performance.
4) Sebastian Andrzej Siewior sent some patches regarding PREEMPT_RT,
the full series of which wasn't ready yet, but the first two
preparatory cleanups were good on their own. One of them touches
files in kernel/irq/, which is the other reason why I'm sending
you this pull early in the cycle.
5) Other assorted correctness fixes from Eric Biggers, Jann Horn,
Mark Brown, Dominik Brodowski, and myself"
* 'random-5.17-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: don't reset crng_init_cnt on urandom_read()
random: avoid superfluous call to RDRAND in CRNG extraction
random: early initialization of ChaCha constants
random: use IS_ENABLED(CONFIG_NUMA) instead of ifdefs
random: harmonize "crng init done" messages
random: mix bootloader randomness into pool
random: do not throw away excess input to crng_fast_load
random: do not re-init if crng_reseed completes before primary init
random: fix crash on multiple early calls to add_bootloader_randomness()
random: do not sign extend bytes for rotation when mixing
random: use BLAKE2s instead of SHA1 in extraction
lib/crypto: blake2s: include as built-in
random: fix data race on crng init time
random: fix data race on crng_node_pool
irq: remove unused flags argument from __handle_irq_event_percpu()
random: remove unused irq_flags argument from add_interrupt_randomness()
random: document add_hwgenerator_randomness() with other input functions
MAINTAINERS: add git tree for random.c
Pull RAS updates from Borislav Petkov:
"A relatively big amount of movements in RAS-land this time around:
- First part of a series to move the AMD address translation code
from arch/x86/ to amd64_edac as that is its only user anyway
- Some MCE error injection improvements to the AMD side
- Reorganization of the #MC handler code and the facilities it calls
to make it noinstr-safe
- Add support for new AMD MCA bank types and non-uniform banks layout
- The usual set of cleanups and fixes"
* tag 'ras_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/mce: Reduce number of machine checks taken during recovery
x86/mce/inject: Avoid out-of-bounds write when setting flags
x86/MCE/AMD, EDAC/mce_amd: Support non-uniform MCA bank type enumeration
x86/MCE/AMD, EDAC/mce_amd: Add new SMCA bank types
x86/mce: Check regs before accessing it
x86/mce: Mark mce_start() noinstr
x86/mce: Mark mce_timed_out() noinstr
x86/mce: Move the tainting outside of the noinstr region
x86/mce: Mark mce_read_aux() noinstr
x86/mce: Mark mce_end() noinstr
x86/mce: Mark mce_panic() noinstr
x86/mce: Prevent severity computation from being instrumented
x86/mce: Allow instrumentation during task work queueing
x86/mce: Remove noinstr annotation from mce_setup()
x86/mce: Use mce_rdmsrl() in severity checking code
x86/mce: Remove function-local cpus variables
x86/mce: Do not use memset to clear the banks bitmaps
x86/mce/inject: Set the valid bit in MCA_STATUS before error injection
x86/mce/inject: Check if a bank is populated before injecting
x86/mce: Get rid of cpu_missing
...
Pull thread_info flag accessor helper updates from Borislav Petkov:
"Add a set of thread_info.flags accessors which snapshot it before
accesing it in order to prevent any potential data races, and convert
all users to those new accessors"
* tag 'core_entry_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc: Snapshot thread flags
powerpc: Avoid discarding flags in system_call_exception()
openrisc: Snapshot thread flags
microblaze: Snapshot thread flags
arm64: Snapshot thread flags
ARM: Snapshot thread flags
alpha: Snapshot thread flags
sched: Snapshot thread flags
entry: Snapshot thread flags
x86: Snapshot thread flags
thread_info: Add helpers to snapshot thread flags
Pull x86 vdso updates from Borislav Petkov:
"Remove -nostdlib compiler flag now that the vDSO uses the linker
instead of the compiler driver to link files"
* tag 'x86_vdso_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Remove -nostdlib compiler flag
x86/vdso: Remove -nostdlib compiler flag
Pull x86 build fix from Borislav Petkov:
"A fix for cross-compiling the compressed stub on arm64 with clang"
* tag 'x86_build_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Move CLANG_FLAGS to beginning of KBUILD_CFLAGS
Pull x86 cpuid updates from Borislav Petkov:
- Enable the short string copies for CPUs which support them, in
copy_user_enhanced_fast_string()
- Avoid writing MSR_CSTAR on Intel due to TDX guests raising a #VE trap
* tag 'x86_cpu_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib: Add fast-short-rep-movs check to copy_user_enhanced_fast_string()
x86/cpu: Don't write CSTAR MSR on Intel CPUs
Pull x86 cleanups from Borislav Petkov:
"The mandatory set of random minor cleanups all over tip"
* tag 'x86_cleanups_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Remove redundant assignment to variable shift
x86/boot/string: Add missing function prototypes
x86/fpu: Remove duplicate copy_fpstate_to_sigframe() prototype
x86/uaccess: Move variable into switch case statement
Pull misc x86 updates from Borislav Petkov:
"The pile which we cannot find the proper topic for so we stick it in
x86/misc:
- Add support for decoding instructions which do MMIO accesses in
order to use it in SEV and TDX guests
- An include fix and reorg to allow for removing set_fs in UML later"
* tag 'x86_misc_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Remove the mtrr_bp_init() stub
x86/sev-es: Use insn_decode_mmio() for MMIO implementation
x86/insn-eval: Introduce insn_decode_mmio()
x86/insn-eval: Introduce insn_get_modrm_reg_ptr()
x86/insn-eval: Handle insn_get_opcode() failure
Pull x86 mm updates from Borislav Petkov:
- Flush *all* mappings from the TLB after switching to the trampoline
pagetable to prevent any stale entries' presence
- Flush global mappings from the TLB, in addition to the CR3-write,
after switching off of the trampoline_pgd during boot to clear the
identity mappings
- Prevent instrumentation issues resulting from the above changes
* tag 'x86_mm_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Prevent early boot triple-faults with instrumentation
x86/mm: Include spinlock_t definition in pgtable.
x86/mm: Flush global TLB when switching to trampoline page-table
x86/mm/64: Flush global TLB on boot and AP bringup
x86/realmode: Add comment for Global bit usage in trampoline_pgd
x86/mm: Add missing <asm/cpufeatures.h> dependency to <asm/page_64.h>
Pull x86 SGX updates from Borislav Petkov:
- Add support for handling hw errors in SGX pages: poisoning,
recovering from poison memory and error injection into SGX pages
- A bunch of changes to the SGX selftests to simplify and allow of SGX
features testing without the need of a whole SGX software stack
- Add a sysfs attribute which is supposed to show the amount of SGX
memory in a NUMA node, similar to what /proc/meminfo is to normal
memory
- The usual bunch of fixes and cleanups too
* tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/sgx: Fix NULL pointer dereference on non-SGX systems
selftests/sgx: Fix corrupted cpuid macro invocation
x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
x86/sgx: Fix minor documentation issues
selftests/sgx: Add test for multiple TCS entry
selftests/sgx: Enable multiple thread support
selftests/sgx: Add page permission and exception test
selftests/sgx: Rename test properties in preparation for more enclave tests
selftests/sgx: Provide per-op parameter structs for the test enclave
selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed
selftests/sgx: Move setup_test_encl() to each TEST_F()
selftests/sgx: Encpsulate the test enclave creation
selftests/sgx: Dump segments and /proc/self/maps only on failure
selftests/sgx: Create a heap for the test enclave
selftests/sgx: Make data measurement for an enclave segment optional
selftests/sgx: Assign source for each segment
selftests/sgx: Fix a benign linker warning
x86/sgx: Add check for SGX pages to ghes_do_memory_failure()
x86/sgx: Add hook to error injection address validation
x86/sgx: Hook arch_memory_failure() into mainline code
...
Pull x86 resource control fixlet from Borislav Petkov:
"A minor code cleanup removing a redundant assignment"
* tag 'x86_cache_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Remove redundant assignment to variable chunks
Pull x86 SEV updates from Borislav Petkov:
"The accumulated pile of x86/sev generalizations and cleanups:
- Share the SEV string unrolling logic with TDX as TDX guests need it
too
- Cleanups and generalzation of code shared by SEV and TDX"
* tag 'x86_sev_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Move common memory encryption code to mem_encrypt.c
x86/sev: Rename mem_encrypt.c to mem_encrypt_amd.c
x86/sev: Use CC_ATTR attribute to generalize string I/O unroll
x86/sev: Remove do_early_exception() forward declarations
x86/head64: Carve out the guest encryption postprocessing into a helper
x86/sev: Get rid of excessive use of defines
x86/sev: Shorten GHCB terminate macro names
Pull x86 platform fix from Borislav Petkov:
"A single DT compatibility fix for the Intel media processor CE4100
driver"
* tag 'x86_platform_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
Pull x86 paravirtualization fix from Borislav Petkov:
"Define the INTERRUPT_RETURN macro only when CONFIG_XEN_PV is enabled
as it is its only user"
* tag 'x86_paravirt_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Fix build PARAVIRT_XXL=y without XEN_PV
Pull x86 fpu update from Borislav Petkov:
"A single x86/fpu update for 5.17:
- Exclude AVX opmask registers use from AVX512 state tracking as they
don't contribute to frequency throttling"
* tag 'x86_fpu_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Correct AVX512 state tracking
Merge cpuidle updates, PM core updates and one hiberation-related
update for 5.17-rc1:
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
* pm-cpuidle:
cpuidle: use default_groups in kobj_type
cpuidle: Fix cpuidle_remove_state_sysfs() kerneldoc comment
cpuidle: menu: Fix typo in a comment
* pm-core:
PM: runtime: Simplify locking in pm_runtime_put_suppliers()
mmc: mxc: Use the new PM macros
mmc: jz4740: Use the new PM macros
PM: runtime: Add safety net to supplier device release
PM: runtime: Capture device status before disabling runtime PM
PM: core: Add new *_PM_OPS macros, deprecate old ones
PM: core: Redefine pm_ptr() macro
r8169: Avoid misuse of pm_ptr() macro
* pm-sleep:
PM: hibernate: Allow ACPI hardware signature to be honoured
Merge cpufreq updates for 5.17-rc1:
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
* pm-cpufreq: (32 commits)
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
MAINTAINERS: Add AMD P-State driver maintainer entry
Documentation: amd-pstate: Add AMD P-State driver introduction
cpufreq: amd-pstate: Add AMD P-State performance attributes
cpufreq: amd-pstate: Add AMD P-State frequencies attributes
cpufreq: amd-pstate: Add boost mode support for AMD P-State
cpufreq: amd-pstate: Add trace for AMD P-State module
cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
cpufreq: amd-pstate: Add fast switch function for AMD P-State
cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
ACPI: CPPC: Add CPPC enable register function
ACPI: CPPC: Check present CPUs for determining _CPC is valid
ACPI: CPPC: Implement support for SystemIO registers
x86/msr: Add AMD CPPC MSR definitions
x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
cpufreq: use default_groups in kobj_type
cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
cpufreq: intel_pstate: Update cpuinfo.max_freq on HWP_CAP changes
...
Pull arm64 updates from Catalin Marinas:
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME
support (scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and
reciprocal square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP ==
1 (potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: errata: Fix exec handling in erratum 1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64: Enable KCSAN
kselftest/arm64: Add pidbench for floating point syscall cases
arm64/fp: Add comments documenting the usage of state restore functions
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
...
