The user can change the QoS credits dynamically with the
management console interface which notifies OS with sysfs. After
returning from the OS interface successfully, the management
console updates the hypervisor. Since the VAS capabilities in
the hypervisor is not updated when the OS gets the update,
the kernel is using the old total credits value from the
hypervisor. Fix this issue by using the new QoS credits
from the userspace instead of depending on VAS capabilities
from the hypervisor.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/76d156f8af1e03cc09369d68e0bfad0c40031bcc.camel@linux.ibm.com
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off().
Fixes: d164f6d4f9 ("powerpc/4xx: Add suspend and idle support")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192941.20955-1-rdunlap@infradead.org
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from powersave_off().
Fixes: 302eca184f ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org
When CONFIG_PPC64 is set and CONFIG_ALTIVEC is not the following build
failures occur:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c: In function 'dc_fpu_begin':
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c:61:17: error: implicit declaration of function 'enable_kernel_altivec'; did you mean 'enable_kernel_vsx'? [-Werror=implicit-function-declaration]
61 | enable_kernel_altivec();
| ^~~~~~~~~~~~~~~~~~~~~
| enable_kernel_vsx
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c: In function 'dc_fpu_end':
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c:89:17: error: implicit declaration of function 'disable_kernel_altivec'; did you mean 'disable_kernel_vsx'? [-Werror=implicit-function-declaration]
89 | disable_kernel_altivec();
| ^~~~~~~~~~~~~~~~~~~~~~
| disable_kernel_vsx
cc1: some warnings being treated as errors
This commit adds stub instances of both enable_kernel_altivec() and
disable_kernel_altivec() the same way as done in commit bd73758803
regarding enable_kernel_vsx() and disable_kernel_vsx().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220221230741.293064-1-magalilemes00@gmail.com
The strlcpy should not be used because it doesn't limit the source
length. As linus says, it's a completely useless function if you
can't implicitly trust the source string - but that is almost always
why people think they should use it! All in all the BSD function
will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, We prefer using strscpy instead of strlcpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210807072154.64512-1-wangborong@cdjrlc.com
Fix some pr_debug() issues in mpc52xx_pci.c:
- use __func__ to print function names
- use "%pr" to print struct resource entries
- use "%pa" to print a resource_size_t (phys_addr_t)
The latter two fix several build warnings:
../arch/powerpc/platforms/52xx/mpc52xx_pci.c: In function 'mpc52xx_pci_setup':
../include/linux/kern_levels.h:5:18: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
../arch/powerpc/platforms/52xx/mpc52xx_pci.c:277:40: note: format string is defined here
277 | pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n",
| ~^
| |
| unsigned int
| %llx
../include/linux/kern_levels.h:5:18: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
../arch/powerpc/platforms/52xx/mpc52xx_pci.c:277:49: note: format string is defined here
277 | pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n",
| ~^
| |
| unsigned int
| %llx
../arch/powerpc/platforms/52xx/mpc52xx_pci.c:299:36: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
299 | (unsigned long long)res->flags, (void*)hose->io_base_phys);
| ^
../arch/powerpc/platforms/52xx/mpc52xx_pci.c:295:2: note: in expansion of macro 'pr_debug'
295 | pr_debug(".io_resource={.start=%llx,.end=%llx,.flags=%llx} "
| ^~~~~~~~
The change to print mem_resource[0] is for consistency within this
source file and to use the kernel API -- there were no warnings here.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[chleroy: Fixed checkpatch complaints]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210429005323.8195-1-rdunlap@infradead.org
We found these warnings in arch/powerpc/kernel/time.c as follows:
warning: symbol 'decrementer_max' was not declared. Should it be static?
warning: symbol 'rtc_lock' was not declared. Should it be static?
warning: symbol 'dtl_consumer' was not declared. Should it be static?
Declare 'decrementer_max' in powerpc asm/time.h.
Include linux/mc146818rtc.h in powerpc kernel/time.c where 'rtc_lock' is
declared. And remove duplicated declaration of 'rtc_lock' in powerpc
platforms/chrp/time.c because it has included linux/mc146818rtc.h.
Move 'dtl_consumer' definition after "include <asm/dtl.h>" because it is
declared there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210324090939.143477-1-heying24@huawei.com
Build kernel with `C=2`:
arch/powerpc/perf/isa207-common.c:24:18: warning: symbol
'isa207_pmu_format_attr' was not declared. Should it be static?
arch/powerpc/perf/power9-pmu.c:101:5: warning: symbol 'p9_dd21_bl_ev'
was not declared. Should it be static?
arch/powerpc/perf/power9-pmu.c:115:5: warning: symbol 'p9_dd22_bl_ev'
was not declared. Should it be static?
Those symbols are used only in the files that define them so we declare
them as static to fix the warnings.
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200923071453.2540-1-wangwensheng4@huawei.com
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In smp_85xx_start_cpu() we are passed an address but we're unsure if
it's a real or virtual address, so there's a check to determine that.
The check has an off-by-one in that it tests if the address is greater
than high_memory, but high_memory is the first address of high memory,
so the check should be greater-or-equal.
It seems this has never been a problem in practice, but it also triggers
the DEBUG_VIRTUAL checks in __pa() which we would like to avoid. We can
fix both issues by converting high_memory - 1 to a physical address and
testing against that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406145802.538416-3-mpe@ellerman.id.au
Currently the boot wrapper lacks a -mcpu option, so it will be built for
the toolchain's default cpu. This is a problem if the toolchain defaults
to a cpu with newer instructions.
We could wire in TARGET_CPU but instead use the oldest supported option
so the wrapper runs anywhere.
The GCC documentation stays that -mcpu=powerpc64le will give us a
generic 64 bit powerpc machine:
-mcpu=powerpc, -mcpu=powerpc64, and -mcpu=powerpc64le specify pure
32-bit PowerPC (either endian), 64-bit big endian PowerPC and 64-bit
little endian PowerPC architecture machine types, with an appropriate,
generic processor model assumed for scheduling purposes.
So do that for each of the three machines.
This bug was found when building the kernel with a toolchain that
defaulted to powre10, resulting in a pcrel enabled wrapper which fails
to link:
arch/powerpc/boot/wrapper.a(crt0.o): in function `p_base':
(.text+0x150): call to `platform_init' lacks nop, can't restore toc; (toc save/adjust stub)
(.text+0x154): call to `start' lacks nop, can't restore toc; (toc save/adjust stub)
powerpc64le-buildroot-linux-gnu-ld: final link failed: bad value
Even with tha bug worked around the resulting kernel would crash on a
power9 box:
$ qemu-system-ppc64 -nographic -nodefaults -M powernv9 -kernel arch/powerpc/boot/zImage.epapr -serial mon:stdio
[ 7.069331356,5] INIT: Starting kernel at 0x20010020, fdt at 0x3068c628 25694 bytes
[ 7.130374661,3] ***********************************************
[ 7.131072886,3] Fatal Exception 0xe40 at 00000000200101e4 MSR 9000000000000001
[ 7.131290613,3] CFAR : 000000002001027c MSR : 9000000000000001
[ 7.131433759,3] SRR0 : 0000000020010050 SRR1 : 9000000000000001
[ 7.131577775,3] HSRR0: 00000000200101e4 HSRR1: 9000000000000001
[ 7.131733687,3] DSISR: 00000000 DAR : 0000000000000000
[ 7.131905162,3] LR : 0000000020010280 CTR : 0000000000000000
[ 7.132068356,3] CR : 44002004 XER : 00000000
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/400
Link: https://lore.kernel.org/r/20220330112437.540214-1-joel@jms.id.au
The F_GETLK64/F_SETLK64/F_SETLKW64 fcntl opcodes are only implemented
for the 32-bit syscall APIs, but are also needed for compat handling
on 64-bit kernels.
Consolidate them in unistd.h instead of definining the internal compat
definitions in compat.h, which is rather error prone (e.g. parisc
gets the values wrong currently).
Note that before this change they were never visible to userspace due
to the fact that CONFIG_64BIT is only set for kernel builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On crash, boot memory area is copied to a destination address by f/w.
This region is setup as separate PT_LOAD segment with appropriate
offset to handle the different physical address and offset in vmcore.
If this destination address is not page aligned, reading the vmcore
with mmap is likely to fail forcing tools like makedumpfile to fall
back to regular read. Avoid mmap read failure by ensuring that the
destination address is always page aligned.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-3-hbathini@linux.ibm.com
Boot memory area is setup as separate PT_LOAD segment in the vmcore
as it is moved by f/w, on crash, to a destination address provided by
the kernel. Having separate PT_LOAD segment helps in handling the
different physical address and offset for boot memory area in the
vmcore.
Commit ced1bf52f4 ("powerpc/fadump: merge adjacent memory ranges to
reduce PT_LOAD segements") inadvertly broke this pre-condition for
cases where some of the first kernel memory is available adjacent to
boot memory area. This scenario is rare but possible when memory for
fadump could not be reserved adjacent to boot memory area owing to
memory hole or such. Reading memory from a vmcore exported in such
scenario provides incorrect data. Fix it by ensuring no other region
is folded into boot memory area.
Fixes: ced1bf52f4 ("powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements")
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-2-hbathini@linux.ibm.com
An LPAR can be terminated by the POWER Hypervisor (PHYP) for various
reasons. If FADump was configured when PHYP terminates the LPAR,
platform-assisted dump is initiated to save the kernel dump. But CPU
register data would not be processed/saved in the vmcore in such case
because CPU mask is set in crash_fadump() at the time of kernel crash
and it remains unset in this case with LPAR being terminated by PHYP
abruptly.
To get around the problem, initialize cpu_mask to cpu_possible_mask
so as to ensure all possible CPUs' register data is processed for the
vmcore generated on PHYP terminated LPAR. Also, rename the crash info
member variable from online_mask to cpu_mask as it doesn't necessarily
have to be online CPU mask always.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220404182137.59231-1-hbathini@linux.ibm.com
Dump capture would fail if capture kernel is not of the endianess as the
production kernel, because the in-memory data structure (struct
opal_fadump_mem_struct) shared across production kernel and capture
kernel assumes the same endianess for both the kernels, which doesn't
have to be true always. Fix it by having a well-defined endianess for
struct opal_fadump_mem_struct.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161902744901.86147.14719228311655123526.stgit@hbathini
Pull powerpc fixes from Michael Ellerman:
- Partly revert a change to our timer_interrupt() that caused lockups
with high res timers disabled.
- Fix a bug in KVM TCE handling that could corrupt kernel memory.
- Two commits fixing Power9/Power10 perf alternative event selection.
Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic
Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin.
* tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf: Fix 32bit compile
powerpc/perf: Fix power10 event alternatives
powerpc/perf: Fix power9 event alternatives
KVM: PPC: Fix TCE handling for VFIO
powerpc/time: Always set decrementer in timer_interrupt()
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
