Reserve memory from &_text to &_end. Otherwise if kernel address
was modified, the memory range of start_pfn to kernel_start_pfn
would be reserved. Then we could not use this range.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 9cce844abf ("MIPS: CPU#0 is not hotpluggable"),
c->hotpluggable is 0 for CPU 0 and it will not generate a control
file in sysfs for this CPU:
[root@linux loongson]# cat /sys/devices/system/cpu/cpu0/online
cat: /sys/devices/system/cpu/cpu0/online: No such file or directory
[root@linux loongson]# echo 0 > /sys/devices/system/cpu/cpu0/online
bash: /sys/devices/system/cpu/cpu0/online: Permission denied
So no need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable(),
just remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Provide a weak plat_get_fdt() in relocate.c in case some platform enable
USE_OF while plat_get_fdt() is useless.
1MB RELOCATION_TABLE_SIZE is small for Loongson64 because too many
instructions should be relocated. 2MB is enough in present.
Add KASLR support for Loongson64.
KASLR(kernel address space layout randomization)
To enable KASLR on Loongson64:
First, make loongson3_defconfig.
Then, enable CONFIG_RELOCATABLE and CONFIG_RANDOMIZE_BASE.
Finally, compile the kernel.
To test KASLR on Loongson64:
Start machine with KASLR kernel.
The first time:
# cat /proc/iomem
00200000-0effffff : System RAM
02f30000-03895e9f : Kernel code
03895ea0-03bc7fff : Kernel data
03e30000-04f43f7f : Kernel bss
The second time:
# cat /proc/iomem
00200000-0effffff : System RAM
022f0000-02c55e9f : Kernel code
02c55ea0-02f87fff : Kernel data
031f0000-04303f7f : Kernel bss
We see that code, data and bss sections become randomize.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Apply_r_mips_26_rel() relocates instructions like j, jal and etc. These
instructions consist of 6bits function field and 26bits address field.
The value of target_addr as follows,
=================================================================
| high 4bits | low 28bits |
=================================================================
|the high 4bits of this PC | the low 26bits of instructions << 2|
=================================================================
Thus, loc_orig and log_new both need high 4bits rather than high 6bits.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
Most architectures with the exception of alpha, mips, parisc and
sparc use the same values for these flags. Move their definitions into
asm-generic/signal-defs.h and allow the architectures with non-standard
values to override them. Also, document the non-standard flag values
in order to make it easier to add new generic flags in the future.
A consequence of this change is that on powerpc and x86, the constants'
values aside from SA_RESETHAND change signedness from unsigned
to signed. This is not expected to impact realistic use of these
constants. In particular the typical use of the constants where they
are or'ed together and assigned to sa_flags (or another int variable)
would not be affected.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528
Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the user manual and code comment said, Loongson-3 has 4-scache banks,
while Loongson-2K has only 2 banks, so we should multiply the number of
scache banks, this multiply operation should be done by c->scache.sets
instead of scache_size, otherwise we will get the wrong scache size when
execute lscpu. For example, the scache size should be 8192K instead of
2048K on the Loongson 3A3000 and 3A4000 platform, we can see the related
info in the following boot message:
[loongson@linux ~]$ dmesg | grep "Unified secondary cache"
[ 0.000000] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[ 4.061909] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[ 4.125629] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[ 4.188379] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
E.g. without this patch:
[loongson@linux ~]$ cat /sys/devices/system/cpu/cpu*/cache/index2/size
2048K
2048K
2048K
2048K
[loongson@linux ~]$ lscpu | grep "L2 cache"
L2 cache: 2048K
With this patch:
[loongson@linux ~]$ cat /sys/devices/system/cpu/cpu*/cache/index2/size
8192K
8192K
8192K
8192K
[loongson@linux ~]$ lscpu | grep "L2 cache"
L2 cache: 8192K
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since commit 02cf211968 ("Cleanup the mess in cpu_cache_init."),
cpu_has_6k_cache and cpu_has_8k_cache have no user, r6k_cache_init()
and r8k_cache_init() are not defined for over 15 years, just remove
them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Protection map difference between RIXI and non RIXI cpus is _PAGE_NO_EXEC
and _PAGE_NO_READ usage. Both already take care of cpu_has_rixi while
setting up the page bits. So we just need one setup of protection map
and can drop the now unused (and broken for RIXI) PAGE_* defines.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS protection bits are setup during runtime so using defines like
PAGE_SHARED ignores this runtime changes. Using vm_get_page_prot
to get correct page protection fixes this.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS protection bits are setup during runtime so using defines like
PAGE_READONLY ignores these runtime changes. To fix this we simply
use the page protection of the setup vma.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The DLCI driver (dlci.c) implements the Frame Relay protocol. However,
we already have another newer and better implementation of Frame Relay
provided by the HDLC_FR driver (hdlc_fr.c).
The DLCI driver's implementation of Frame Relay is used by only one
hardware driver in the kernel - the SDLA driver (sdla.c).
The SDLA driver provides Frame Relay support for the Sangoma S50x devices.
However, the vendor provides their own driver (along with their own
multi-WAN-protocol implementations including Frame Relay), called WANPIPE.
I believe most users of the hardware would use the vendor-provided WANPIPE
driver instead.
(The WANPIPE driver was even once in the kernel, but was deleted in
commit 8db60bcf30 ("[WAN]: Remove broken and unmaintained Sangoma
drivers.") because the vendor no longer updated the in-kernel WANPIPE
driver.)
Cc: Mike McLagan <mike.mclagan@linux.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1.Refresh defconfig of CI20 to support OTG and RNG.
2.Refresh defconfig of CU1000-Neo to support OTG/RNG/OST/SC16IS752.
3.Refresh defconfig of CU1830-Neo to support OTG/DTRNG/OST/SC16IS752.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull in mips-fixes to get memblock fix.
- fix bug preventing booting on several platforms
- fix for build error, when modules need has_transparent_hugepage
- fix for memleak in alchemy clk setup
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If the clk_register fails, we should free h before
function returns to prevent memleak.
Fixes: 474402291a ("MIPS: Alchemy: clock framework integration of onchip clocks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The loop over all memblocks works with PFNs and not physical
addresses, so we need for_each_mem_pfn_range().
Fixes: b10d6bca87 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = a27bd01c
[00000000] *pgd=236a0003, *pmd=1ffa64003
Internal error: Oops: 207 [#1] SMP ARM
Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
Hardware name: BCM2711
PC is at zs_map_object+0x94/0x338
LR is at zram_bvec_rw.constprop.0+0x330/0xa64
pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013
sp : e376bbe0 ip : 00000000 fp : c1e2921c
r10: 00000002 r9 : c1dda730 r8 : 00000000
r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000
r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5383d Table: 235c2a80 DAC: fffffffd
Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
Stack: (0xe376bbe0 to 0xe376c000)
As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.
The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.
After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.
I looked up the possible number of bits in source code and
datasheets, here is what I found:
- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
support more than 32 bits, even though supersections in theory allow
up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
XPA supports up to 60 bits in theory, but 40 bits are more than
anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit
addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit
addressing. There is no highmem support on RISC-V, so anything
above 2GB is unused, but it might be useful to eventually support
CONFIG_ZRAM for high pages.
Fixes: 61989a80fb ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a9 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit c3e2ee6574 ("MIPS: generic: Add support for zboot") added
support for self-extracting images to Generic MIPS. However, the
intended way to boot Generic MIPS kernels is using FIT Images and
UHI boot protocol, but currently there's no way to make self-extracting
FIT Image (only legacy uzImages).
Add a target for this named "vmlinuz.itb", which will consist of
vmlinuz.bin and selected DT blobs. It will allow to have the advantages
of both UHI and self-extracting images.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
1. All final targets like vmlinuz.{bin,ecoff,srec} etc. should reside in
$(objtree)/arch/mips/boot, not in the root $(objtree) directory.
The only file that should be left there is vmlinuz, similar to other
architectures.
2. Add all the targets to $(targets) variable, so they'll be properly
accounted by Kbuild. This also allows to remove redundant
$(clean-files) (which were missing uzImage BTW).
3. Prefix all targets with $(obj)/$(objtree), depending on their
locations.
Misc: fix the identation of the 'STRIP' quiet message.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Ocelots is supported by the generic MIPS build so make it clears that
LEGACY_BOARD_OCELOT is only needed for legacy boards which didn't have
bootloader supporting device tree.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Ocelot belongs to a family of SoC named the VCore III. In order to add
these new Soc, use the new symbol SOC_VCOREIII instead of a one
dedicated to Ocelot.
In order to avoid regression on driver building, the MSCC_OCELOT
configuration symbol is kept until the driver will be converted.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When BCM47XX_BCMA is enabled and BCMA_DRIVER_PCI is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for BCMA_DRIVER_PCI_HOSTMODE
Depends on [n]: MIPS [=y] && BCMA_DRIVER_PCI [=n] && PCI_DRIVERS_LEGACY [=y] && BCMA [=y]=y
Selected by [y]:
- BCM47XX_BCMA [=y] && BCM47XX [=y] && PCI [=y]
The reason is that BCM47XX_BCMA selects BCMA_DRIVER_PCI_HOSTMODE without
depending on or selecting BCMA_DRIVER_PCI while BCMA_DRIVER_PCI_HOSTMODE
depends on BCMA_DRIVER_PCI. This can also fail building the kernel.
Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.
Fixes: c1d1c5d421 ("bcm47xx: add support for bcma bus")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209879
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When BCM47XX_SSB is enabled and SSB_PCIHOST is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for SSB_B43_PCI_BRIDGE
Depends on [n]: SSB [=y] && SSB_PCIHOST [=n]
Selected by [y]:
- BCM47XX_SSB [=y] && BCM47XX [=y] && PCI [=y]
The reason is that BCM47XX_SSB selects SSB_B43_PCI_BRIDGE without
depending on or selecting SSB_PCIHOST while SSB_B43_PCI_BRIDGE depends on
SSB_PCIHOST. This can also fail building the kernel as demonstrated in a
bug report.
Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210051
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In play_dead function, the whole 64-bit PC mailbox was used as a indicator
to determine if the master core had written boot jump information.
However, after we introduced CSR mailsend, the hardware will not guarante
an atomic write for the 64-bit PC mailbox. Thus we have to use the lower
32-bit which is written at the last as the jump indicator instead.
Signed-off-by: Lu Zeng <zenglu@loongson.cn>
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Loongson 3A4000+ CPU has per-core Mail_Send register to send mail,
there is no need to maintain register address of each core and node,
just simply specify cpu number.
Signed-off-by: Lu Zeng <zenglu@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the current code, for example, core 1 sets Core[0, 1, 2, 3]_IPI_Enalbe
register and core 2, 3 do the same thing on the 1-way Loongson64 platform,
this is not necessary. Set IPI_Enable register per core by itself to avoid
duplicate operations and make the logic more clear.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
