Since SoM revision 1.9 the PHY has been replaced with an ADIN1300,
add an entry for it next to the original.
As Russell King pointed out, additional phy nodes cause warnings like:
mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing
To avoid this the new node has its status set to disabled. U-Boot will
be modified to enable the appropriate phy node after probing.
The existing ar8035 nodes have to stay enabled by default to avoid
breaking existing systems when they update Linux only.
Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
update for the MAINTAINERS file, and few bug fixes for dts
descriptions:
- Updates to the BananaPi R2-Pro (rk3568) dts to match production
hardware rather than the prototype version.
- Qualcomm sm8250 soundwire gets disabled on some machines to avoid
crashes
- A number of aspeed SoC specific fixes, addressing incorrect pin
cotrol settings, some values in the romed8hm board, and a revert
for an accidental removal of a DT node"
* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: omap: remove me as a maintainer
ARM: dts: aspeed: Add video engine to g6
ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
arm64: dts: rockchip: Change io-domains of bpi-r2-pro
The HPE SoC is new to linux. A basic device tree layout with minimum
required for linux to boot including a timer and watchdog support has
been created.
The dts file is empty at this point but will be updated in subsequent
updates as board specific features are enabled.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enable HPE GXP Architecture and its watchdog for base support for HPE
GXP SoCs.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GXP is the HPE BMC SoC that is used in the majority
of current generation HPE servers. Traditionally the asic will
last multiple generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC
features at HPE. It supports ARMv7 architecture based on the Cortex A9
core. It is capable of using an AXI bus to whicha memory controller is
attached. It has multiple SPI interfaces to connect boot flash and BIOS
flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple
i2c engines to drive connectivity with a host infrastructure. There
currently are no public specifications but this process is being worked.
Previously there was a requirement to reset the EHCI controller for the
asic to boot. This functionality has been moved to the u-boot
bootloader.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow
encoding, and so it does not jump to the following instruction as
expected. So use W(b) instead.
Fixes: 6c7cb60bff ("ARM: fix Thumb2 regression with Spectre BHB")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The Spectre-BHB mitigations were inadvertently left disabled for
Cortex-A15, due to the fact that cpu_v7_bugs_init() is not called in
that case. So fix that.
Fixes: b9baf5c8c5 ("ARM: Spectre-BHB workaround")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
If ATMEL_PM is y but PM is n, build fails:
arch/arm/mach-at91/pm.c:1435:13: error: redefinition of 'at91rm9200_pm_init'
void __init at91rm9200_pm_init(void)
^~~~~~~~~~~~~~~~~~
In file included from arch/arm/mach-at91/pm.c:29:0:
arch/arm/mach-at91/generic.h:19:27: note: previous definition of 'at91rm9200_pm_init' was here
static inline void __init at91rm9200_pm_init(void) { }
^~~~~~~~~~~~~~~~~~
ATMEL_PM should not be enabled independently, it is only selected by Soc.
Fixes: f2f5cf78a3 ("ARM: at91: pm: add support for sama5d2 secure suspend")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220517031606.11628-1-yuehaibing@huawei.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
* irq/gic-v3-nmi-fixes-5.19:
: .
: GICv3 pseudo-NMI fixes from Mark Rutland:
:
: "These patches fix a couple of issues with the way GICv3 pseudo-NMIs are
: handled:
:
: * The first patch adds a barrier we missed from NMI handling due to an
: oversight.
:
: * The second patch refactors some logic around reads from ICC_IAR1_EL1
: and adds commentary to explain what's going on.
:
: * The third patch descends into madness, reworking gic_handle_irq() to
: consistently manage ICC_PMR_EL1 + DAIF and avoid cases where these can
: be left in an inconsistent state while softirqs are processed."
: .
irqchip/gic-v3: Fix priority mask handling
irqchip/gic-v3: Refactor ISB + EOIR at ack time
irqchip/gic-v3: Ensure pseudo-NMIs have an ISB between ack and handling
Signed-off-by: Marc Zyngier <maz@kernel.org>
Not all of these drivers are needed on every ARCH_SUNXI platform. In
particular, the ARCH_SUNXI symbol will be reused for the Allwinner D1,
a RISC-V SoC which contains none of these irqchips.
Introduce Kconfig symbols so we can select only the drivers actually
used by a particular set of platforms. This also lets us move the
irqchip driver dependencies to a more appropriate location.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220509034941.30704-1-samuel@sholland.org
There are cases where a context synchronization event is necessary
between an IRQ being raised and being handled, and there are races such
that we cannot rely upon the exception entry being subsequent to the
interrupt being raised. To fix this, we place an ISB between a read of
IAR and the subsequent invocation of an IRQ handler.
When EOI mode 1 is in use, we need to EOI an interrupt prior to invoking
its handler, and we have a write to EOIR for this. As this write to EOIR
requires an ISB, and this is provided by the gic_write_eoir() helper, we
omit the usual ISB in this case, with the logic being:
| if (static_branch_likely(&supports_deactivate_key))
| gic_write_eoir(irqnr);
| else
| isb();
This is somewhat opaque, and it would be a little clearer if there were
an unconditional ISB, with only the write to EOIR being conditional,
e.g.
| if (static_branch_likely(&supports_deactivate_key))
| write_gicreg(irqnr, ICC_EOIR1_EL1);
|
| isb();
This patch rewrites the code that way, with this logic factored into a
new helper function with comments explaining what the ISB is for, as
were originally laid out in commit:
39a06b67c2 ("irqchip/gic: Ensure we have an ISB between ack and ->handle_irq")
Note that since then, we removed the IAR polling in commit:
342677d70a ("irqchip/gic-v3: Remove acknowledge loop")
... which removed one of the two race conditions.
For consistency, other portions of the driver are made to manipulate
EOIR using write_gicreg() and explcit ISBs, and the gic_write_eoir()
helper function is removed.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513133038.226182-3-mark.rutland@arm.com
In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Delete no longer needed properties of MediaTek Larbs for MT2701.
* tag 'v5.18-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mediatek: Get rid of mediatek, larb for MM nodes
Link: https://lore.kernel.org/r/b4383f23-0adc-b9de-a1d9-abd1c2f82b27@gmail.com
This concludes a cleanup that was started back in 2019, with an
incompatible DT binding change. Kernels before 5.18 can no longer
use the updated dtb from 5.19, and the drivers no longer parse the
old properties, which breaks compatibility with older dtb files.
Link: https://lore.kernel.org/lkml/1546318276-18993-2-git-send-email-yong.wu@mediatek.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull misc fixes from Andrew Morton:
"Seven MM fixes, three of which address issues added in the most recent
merge window, four of which are cc:stable.
Three non-MM fixes, none very serious"
[ And yes, that's a real pull request from Andrew, not me creating a
branch from emailed patches. Woo-hoo! ]
* tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add a mailing list for DAMON development
selftests: vm: Makefile: rename TARGETS to VMTARGETS
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
mailmap: add entry for martyna.szapar-mudlaw@intel.com
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
procfs: prevent unprivileged processes accessing fdinfo dir
mm: mremap: fix sign for EFAULT error return value
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
mm/huge_memory: do not overkill when splitting huge_zero_page
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
mvebu arm for 5.19 (part 1)
Fix typos in comment on orion5x files
* tag 'mvebu-arm-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
orion5x: fix typos in comments
Link: https://lore.kernel.org/r/87o801r2ss.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
interrupt-parent is not to be used as a boolean property.
It is already present in the DT in the proper way it's supposed to be used:
interrupt-parent = <&gic>;
This is also reported by dtbs_check:
arch/arm/boot/dts/at91-sama7g5ek.dtb: interrupt-controller@e8c11000: interrupt-parent: True is not of type 'array'
From schema: /.local/lib/python3.8/site-packages/dtschema/schemas/interrupts.yaml
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220503133127.64320-1-eugen.hristev@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Crypto module atsha204a is available at i2c address 0x64. Module is used
for symmetric cryptography and provides also hardware random number
generator and OTP storage for device serial number and MAC addresses.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
