When a CPU is booted in EL2, the kernel checks for VHE support and
initializes the CPU core accordingly. For nVHE it also installs the stub
vectors and drops down to EL1.
Once KVM gains the ability to boot cores without going through the
kernel entry point, it will need to initialize the CPU the same way.
Extract the relevant bits of el2_setup into an init_el2_state macro
with an argument specifying whether to initialize for VHE or nVHE.
The following ifdefs are removed:
* CONFIG_ARM_GIC_V3 - always selected on arm64
* CONFIG_COMPAT - hstr_el2 can be set even without 32-bit support
No functional change intended. Size of el2_setup increased by
148 bytes due to duplication.
Signed-off-by: David Brazdil <dbrazdil@google.com>
[maz: reworked to fit the new PSTATE initial setup code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-9-dbrazdil@google.com
CPU index should never be negative. Change the signature of
(set_)cpu_logical_map to take an unsigned int.
This still works even if the users treat the CPU index as an int,
and will allow the hypervisor's implementation to check that the index
is valid with a single upper-bound check.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-8-dbrazdil@google.com
Now that the PAN toggling has been removed, the only user of
__system_matches_cap() is has_generic_auth(), which is only built when
CONFIG_ARM64_PTR_AUTH is selected, and Qian reports that this results in
a build-time warning when CONFIG_ARM64_PTR_AUTH is not selected:
| arch/arm64/kernel/cpufeature.c:2649:13: warning: '__system_matches_cap' defined but not used [-Wunused-function]
| static bool __system_matches_cap(unsigned int n)
| ^~~~~~~~~~~~~~~~~~~~
It's tricky to restructure things to prevent this, so let's mark
__system_matches_cap() as __maybe_unused, as we used to do for the other
user of __system_matches_cap() which we just removed.
Reported-by: Qian Cai <qcai@redhat.com>
Suggested-by: Qian Cai <qcai@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201203152403.26100-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull arm64 fixes from Will Deacon:
"I'm sad to say that we've got an unusually large arm64 fixes pull for
rc7 which addresses numerous significant instrumentation issues with
our entry code.
Without these patches, lockdep is hopelessly unreliable in some
configurations [1,2] and syzkaller is therefore not a lot of use
because it's so noisy.
Although much of this has always been broken, it appears to have been
exposed more readily by other changes such as 044d0d6de9 ("lockdep:
Only trace IRQ edges") and general lockdep improvements around IRQ
tracing and NMIs.
Fixing this properly required moving much of the instrumentation hooks
from our entry assembly into C, which Mark has been working on for the
last few weeks. We're not quite ready to move to the recently added
generic functions yet, but the code here has been deliberately written
to mimic that closely so we can look at cleaning things up once we
have a bit more breathing room.
Having said all that, the second version of these patches was posted
last week and I pushed it into our CI (kernelci and cki) along with a
commit which forced on PROVE_LOCKING, NOHZ_FULL and
CONTEXT_TRACKING_FORCE. The result? We found a real bug in the
md/raid10 code [3].
Oh, and there's also a really silly typo patch that's unrelated.
Summary:
- Fix numerous issues with instrumentation and exception entry
- Fix hideous typo in unused register field definition"
[1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com
[2] https://lore.kernel.org/r/20201119193819.GA2601289@elver.google.com
[3] https://lore.kernel.org/r/94c76d5e-466a-bc5f-e6c2-a11b65c39f83@redhat.com
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Fix typo in macro definition
arm64: entry: fix EL1 debug transitions
arm64: entry: fix NMI {user, kernel}->kernel transitions
arm64: entry: fix non-NMI kernel<->kernel transitions
arm64: ptrace: prepare for EL1 irq/rcu tracking
arm64: entry: fix non-NMI user<->kernel transitions
arm64: entry: move el1 irq/nmi logic to C
arm64: entry: prepare ret_to_user for function call
arm64: entry: move enter_from_user_mode to entry-common.c
arm64: entry: mark entry code as noinstr
arm64: mark idle code as noinstr
arm64: syscall: exit userspace before unmasking exceptions
Now that set_fs() is gone, addr_limit_user_check() is redundant. Remove
the checks and associated thread flag.
To ensure that _TIF_WORK_MASK can be used as an immediate value in an
AND instruction (as it is in `ret_to_user`), TIF_MTE_ASYNC_FAULT is
renumbered to keep the constituent bits of _TIF_WORK_MASK contiguous.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-11-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that the uaccess primitives dont take addr_limit into account, we
have no need to manipulate this via set_fs() and get_fs(). Remove
support for these, along with some infrastructure this renders
redundant.
We no longer need to flip UAO to access kernel memory under KERNEL_DS,
and head.S unconditionally clears UAO for all kernel configurations via
an ERET in init_kernel_el. Thus, we don't need to dynamically flip UAO,
nor do we need to context-switch it. However, we still need to adjust
PAN during SDEI entry.
Masking of __user pointers no longer needs to use the dynamic value of
addr_limit, and can use a constant derived from the maximum possible
userspace task size. A new TASK_SIZE_MAX constant is introduced for
this, which is also used by core code. In configurations supporting
52-bit VAs, this may include a region of unusable VA space above a
48-bit TTBR0 limit, but never includes any portion of TTBR1.
Note that TASK_SIZE_MAX is an exclusive limit, while USER_DS and
KERNEL_DS were inclusive limits, and is converted to a mask by
subtracting one.
As the SDEI entry code repurposes the otherwise unnecessary
pt_regs::orig_addr_limit field to store the TTBR1 of the interrupted
context, for now we rename that to pt_regs::sdei_ttbr1. In future we can
consider factoring that out.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We currently have many uaccess_*{enable,disable}*() variants, which
subsequent patches will cut down as part of removing set_fs() and
friends. Once this simplification is made, most uaccess routines will
only need to ensure that the user page tables are mapped in TTBR0, as is
currently dealt with by uaccess_ttbr0_{enable,disable}().
The existing uaccess_{enable,disable}() routines ensure that user page
tables are mapped in TTBR0, and also disable PAN protections, which is
necessary to be able to use atomics on user memory, but also permit
unrelated privileged accesses to access user memory.
As preparatory step, let's rename uaccess_{enable,disable}() to
uaccess_{enable,disable}_privileged(), highlighting this caveat and
discouraging wider misuse. Subsequent patches can reuse the
uaccess_{enable,disable}() naming for the common case of ensuring the
user page tables are mapped in TTBR0.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In preparation for removing addr_limit and set_fs() we must decouple the
SDEI PAN/UAO manipulation from the uaccess code, and explicitly
reinitialize these as required.
SDEI enters the kernel with a non-architectural exception, and prior to
the most recent revision of the specification (ARM DEN 0054B), PSTATE
bits (e.g. PAN, UAO) are not manipulated in the same way as for
architectural exceptions. Notably, older versions of the spec can be
read ambiguously as to whether PSTATE bits are inherited unchanged from
the interrupted context or whether they are generated from scratch, with
TF-A doing the latter.
We have three cases to consider:
1) The existing TF-A implementation of SDEI will clear PAN and clear UAO
(along with other bits in PSTATE) when delivering an SDEI exception.
2) In theory, implementations of SDEI prior to revision B could inherit
PAN and UAO (along with other bits in PSTATE) unchanged from the
interrupted context. However, in practice such implementations do not
exist.
3) Going forward, new implementations of SDEI must clear UAO, and
depending on SCTLR_ELx.SPAN must either inherit or set PAN.
As we can ignore (2) we can assume that upon SDEI entry, UAO is always
clear, though PAN may be clear, inherited, or set per SCTLR_ELx.SPAN.
Therefore, we must explicitly initialize PAN, but do not need to do
anything for UAO.
Considering what we need to do:
* When set_fs() is removed, force_uaccess_begin() will have no HW
side-effects. As this only clears UAO, which we can assume has already
been cleared upon entry, this is not a problem. We do not need to add
code to manipulate UAO explicitly.
* PAN may be cleared upon entry (in case 1 above), so where a kernel is
built to use PAN and this is supported by all CPUs, the kernel must
set PAN upon entry to ensure expected behaviour.
* PAN may be inherited from the interrupted context (in case 3 above),
and so where a kernel is not built to use PAN or where PAN support is
not uniform across CPUs, the kernel must clear PAN to ensure expected
behaviour.
This patch reworks the SDEI code accordingly, explicitly setting PAN to
the expected state in all cases. To cater for the cases where the kernel
does not use PAN or this is not uniformly supported by hardware we add a
new cpu_has_pan() helper which can be used regardless of whether the
kernel is built to use PAN.
The existing system_uses_ttbr0_pan() is redefined in terms of
system_uses_hw_pan() both for clarity and as a minor optimization when
HW PAN is not selected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The SDEI support code is split across arch/arm64/ and drivers/firmware/,
largley this is split so that the arch-specific portions are under
arch/arm64, and the management logic is under drivers/firmware/.
However, exception entry fixups are currently under drivers/firmware.
Let's move the exception entry fixups under arch/arm64/. This
de-clutters the management logic, and puts all the arch-specific
portions in one place. Doing this also allows the fixups to be applied
earlier, so things like PAN and UAO will be in a known good state before
we run other logic. This will also make subsequent refactoring easier.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As with SCTLR_ELx and other control registers, some PSTATE bits are
UNKNOWN out-of-reset, and we may not be able to rely on hardware or
firmware to initialize them to our liking prior to entry to the kernel,
e.g. in the primary/secondary boot paths and return from idle/suspend.
It would be more robust (and easier to reason about) if we consistently
initialized PSTATE to a default value, as we do with control registers.
This will ensure that the kernel is not adversely affected by bits it is
not aware of, e.g. when support for a feature such as PAN/UAO is
disabled.
This patch ensures that PSTATE is consistently initialized at boot time
via an ERET. This is not intended to relax the existing requirements
(e.g. DAIF bits must still be set prior to entering the kernel). For
features detected dynamically (which may require system-wide support),
it is still necessary to subsequently modify PSTATE.
As ERET is not always a Context Synchronization Event, an ISB is placed
before each exception return to ensure updates to control registers have
taken effect. This handles the kernel being entered with SCTLR_ELx.EOS
clear (or any future control bits being in an UNKNOWN state).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201113124937.20574-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For a while now el2_setup has performed some basic initialization of EL1
even when the kernel is booted at EL1, so the name is a little
misleading. Further, some comments are stale as with VHE it doesn't drop
the CPU to EL1.
To clarify things, rename el2_setup to init_kernel_el, and update
comments to be clearer as to the function's purpose.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201113124937.20574-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For consistency, all tasks have a pt_regs reserved at the highest
portion of their task stack. Among other things, this ensures that a
task's SP is always pointing within its stack rather than pointing
immediately past the end.
While it is never legitimate to ERET from a kthread, we take pains to
initialize pt_regs for kthreads as if this were legitimate. As this is
never legitimate, the effects of an erroneous return are rarely tested.
Let's simplify things by initializing a kthread's pt_regs such that an
ERET is caught as an illegal exception return, and removing the explicit
initialization of other exception context. Note that as
spectre_v4_enable_task_mitigation() only manipulates the PSTATE within
the unused regs this is safe to remove.
As user tasks will have their exception context initialized via
start_thread() or start_compat_thread(), this should only impact cases
where something has gone very wrong and we'd like that to be clearly
indicated.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201113124937.20574-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Handling all combinations of the VMAP_STACK and SHADOW_CALL_STACK options
in sdei_arch_get_entry_point() makes the code difficult to read,
particularly when considering the error and cleanup paths.
Move the checking of these options into the callee functions, so that
they return early if the relevant option is not enabled.
Signed-off-by: Will Deacon <will@kernel.org>
In debug_exception_enter() and debug_exception_exit() we trace hardirqs
on/off while RCU isn't guaranteed to be watching, and we don't save and
restore the hardirq state, and so may return with this having changed.
Handle this appropriately with new entry/exit helpers which do the bare
minimum to ensure this is appropriately maintained, without marking
debug exceptions as NMIs. These are placed in entry-common.c with the
other entry/exit helpers.
In future we'll want to reconsider whether some debug exceptions should
be NMIs, but this will require a significant refactoring, and for now
this should prevent issues with lockdep and RCU.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marins <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-12-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Exceptions which can be taken at (almost) any time are consdiered to be
NMIs. On arm64 that includes:
* SDEI events
* GICv3 Pseudo-NMIs
* Kernel stack overflows
* Unexpected/unhandled exceptions
... but currently debug exceptions (BRKs, breakpoints, watchpoints,
single-step) are not considered NMIs.
As these can be taken at any time, kernel features (lockdep, RCU,
ftrace) may not be in a consistent kernel state. For example, we may
take an NMI from the idle code or partway through an entry/exit path.
While nmi_enter() and nmi_exit() handle most of this state, notably they
don't save/restore the lockdep state across an NMI being taken and
handled. When interrupts are enabled and an NMI is taken, lockdep may
see interrupts become disabled within the NMI code, but not see
interrupts become enabled when returning from the NMI, leaving lockdep
believing interrupts are disabled when they are actually disabled.
The x86 code handles this in idtentry_{enter,exit}_nmi(), which will
shortly be moved to the generic entry code. As we can't use either yet,
we copy the x86 approach in arm64-specific helpers. All the NMI
entrypoints are marked as noinstr to prevent any instrumentation
handling code being invoked before the state has been corrected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-11-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There are periods in kernel mode when RCU is not watching and/or the
scheduler tick is disabled, but we can still take exceptions such as
interrupts. The arm64 exception handlers do not account for this, and
it's possible that RCU is not watching while an exception handler runs.
The x86/generic entry code handles this by ensuring that all (non-NMI)
kernel exception handlers call irqentry_enter() and irqentry_exit(),
which handle RCU, lockdep, and IRQ flag tracing. We can't yet move to
the generic entry code, and already hadnle the user<->kernel transitions
elsewhere, so we add new kernel<->kernel transition helpers alog the
lines of the generic entry code.
Since we now track interrupts becoming masked when an exception is
taken, local_daif_inherit() is modified to track interrupts becoming
re-enabled when the original context is inherited. To balance the
entry/exit paths, each handler masks all DAIF exceptions before
exit_to_kernel_mode().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-10-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE
will WARN() at boot time that interrupts are enabled when we call
context_tracking_user_enter(), despite the DAIF flags indicating that
IRQs are masked.
The problem is that we're not tracking IRQ flag changes accurately, and
so lockdep believes interrupts are enabled when they are not (and
vice-versa). We can shuffle things so to make this more accurate. For
kernel->user transitions there are a number of constraints we need to
consider:
1) When we call __context_tracking_user_enter() HW IRQs must be disabled
and lockdep must be up-to-date with this.
2) Userspace should be treated as having IRQs enabled from the PoV of
both lockdep and tracing.
3) As context_tracking_user_enter() stops RCU from watching, we cannot
use RCU after calling it.
4) IRQ flag tracing and lockdep have state that must be manipulated
before RCU is disabled.
... with similar constraints applying for user->kernel transitions, with
the ordering reversed.
The generic entry code has enter_from_user_mode() and
exit_to_user_mode() helpers to handle this. We can't use those directly,
so we add arm64 copies for now (without the instrumentation markers
which aren't used on arm64). These replace the existing user_exit() and
user_exit_irqoff() calls spread throughout handlers, and the exception
unmasking is left as-is.
Note that:
* The accounting for debug exceptions from userspace now happens in
el0_dbg() and ret_to_user(), so this is removed from
debug_exception_enter() and debug_exception_exit(). As
user_exit_irqoff() wakes RCU, the userspace-specific check is removed.
* The accounting for syscalls now happens in el0_svc(),
el0_svc_compat(), and ret_to_user(), so this is removed from
el0_svc_common(). This does not adversely affect the workaround for
erratum 1463225, as this does not depend on any of the state tracking.
* In ret_to_user() we mask interrupts with local_daif_mask(), and so we
need to inform lockdep and tracing. Here a trace_hardirqs_off() is
sufficient and safe as we have not yet exited kernel context and RCU
is usable.
* As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only
needs to check for the latter.
* EL0 SError handling will be dealt with in a subsequent patch, as this
needs to be treated as an NMI.
Prior to this patch, booting an appropriately-configured kernel would
result in spats as below:
| DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())
| WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0
| Modules linked in:
| CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--)
| pc : check_flags.part.54+0x1dc/0x1f0
| lr : check_flags.part.54+0x1dc/0x1f0
| sp : ffff80001003bd80
| x29: ffff80001003bd80 x28: ffff66ce801e0000
| x27: 00000000ffffffff x26: 00000000000003c0
| x25: 0000000000000000 x24: ffffc31842527258
| x23: ffffc31842491368 x22: ffffc3184282d000
| x21: 0000000000000000 x20: 0000000000000001
| x19: ffffc318432ce000 x18: 0080000000000000
| x17: 0000000000000000 x16: ffffc31840f18a78
| x15: 0000000000000001 x14: ffffc3184285c810
| x13: 0000000000000001 x12: 0000000000000000
| x11: ffffc318415857a0 x10: ffffc318406614c0
| x9 : ffffc318415857a0 x8 : ffffc31841f1d000
| x7 : 647261685f706564 x6 : ffffc3183ff7c66c
| x5 : ffff66ce801e0000 x4 : 0000000000000000
| x3 : ffffc3183fe00000 x2 : ffffc31841500000
| x1 : e956dc24146b3500 x0 : 0000000000000000
| Call trace:
| check_flags.part.54+0x1dc/0x1f0
| lock_is_held_type+0x10c/0x188
| rcu_read_lock_sched_held+0x70/0x98
| __context_tracking_enter+0x310/0x350
| context_tracking_enter.part.3+0x5c/0xc8
| context_tracking_user_enter+0x6c/0x80
| finish_ret_to_user+0x2c/0x13cr
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-8-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for reworking the EL1 irq/nmi entry code, move the
existing logic to C. We no longer need the asm_nmi_enter() and
asm_nmi_exit() wrappers, so these are removed. The new C functions are
marked noinstr, which prevents compiler instrumentation and runtime
probing.
In subsequent patches we'll want the new C helpers to be called in all
cases, so we don't bother wrapping the calls with ifdeferry. Even when
the new C functions are stubs the trivial calls are unlikely to have a
measurable impact on the IRQ or NMI paths anyway.
Prototypes are added to <asm/exception.h> as otherwise (in some
configurations) GCC will complain about the lack of a forward
declaration. We already do this for existing function, e.g.
enter_from_user_mode().
The new helpers are marked as noinstr (which prevents all
instrumentation, tracing, and kprobes). Otherwise, there should be no
functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-7-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In a subsequent patch ret_to_user will need to make a C function call
(in some configurations) which may clobber x0-x18 at the start of the
finish_ret_to_user block, before enable_step_tsk consumes the flags
loaded into x1.
In preparation for this, let's load the flags into x19, which is
preserved across C function calls. This avoids a redundant reload of the
flags and ensures we operate on a consistent shapshot regardless.
There should be no functional change as a result of this patch. At this
point of the entry/exit paths we only need to preserve x28 (tsk) and the
sp, and x19 is free for this use.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-6-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In later patches we'll want to extend enter_from_user_mode() and add a
corresponding exit_to_user_mode(). As these will be common for all
entries/exits from userspace, it'd be better for these to live in
entry-common.c with the rest of the entry logic.
This patch moves enter_from_user_mode() into entry-common.c. As with
other functions in entry-common.c it is marked as noinstr (which
prevents all instrumentation, tracing, and kprobes) but there are no
other functional changes.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Functions in entry-common.c are marked as notrace and NOKPROBE_SYMBOL(),
but they're still subject to other instrumentation which may rely on
lockdep/rcu/context-tracking being up-to-date, and may cause nested
exceptions (e.g. for WARN/BUG or KASAN's use of BRK) which will corrupt
exceptions registers which have not yet been read.
Prevent this by marking all functions in entry-common.c as noinstr to
prevent compiler instrumentation. This also blacklists the functions for
tracing and kprobes, so we don't need to handle that separately.
Functions elsewhere will be dealt with in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Core code disables RCU when calling arch_cpu_idle(), so it's not safe
for arch_cpu_idle() or its calees to be instrumented, as the
instrumentation callbacks may attempt to use RCU or other features which
are unsafe to use in this context.
Mark them noinstr to prevent issues.
The use of local_irq_enable() in arch_cpu_idle() is similarly
problematic, and the "sched/idle: Fix arch_cpu_idle() vs tracing" patch
queued in the tip tree addresses that case.
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In el0_svc_common() we unmask exceptions before we call user_exit(), and
so there's a window where an IRQ or debug exception can be taken while
RCU is not watching. In do_debug_exception() we account for this in via
debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we
call trace functions which rely on RCU before we have a guarantee that
RCU is watching.
Let's avoid this by having el0_svc_common() exit userspace before
unmasking exceptions, matching what we do for all other EL0 entry paths.
We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ
flags while we're sure exceptions are masked in DAIF.
The workaround for Cortex-A76 erratum 1463225 may trigger a debug
exception before this point, but the debug code invoked in this case is
safe even when RCU is not watching.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
Our Meltdown mitigation state isn't exposed outside of cpufeature.c,
contrary to the rest of the Spectre mitigation state. As we are going
to use it in KVM, expose a arm64_get_meltdown_state() helper which
returns the same possible values as arm64_get_spectre_v?_state().
Signed-off-by: Marc Zyngier <maz@kernel.org>
Provide support for additional kernel command line parameters to be
concatenated onto the end of the command line provided by the
bootloader. Additional parameters are specified in the CONFIG_CMDLINE
option when CONFIG_CMDLINE_EXTEND is selected, matching other
architectures and leveraging existing support in the FDT and EFI stub
code.
Special care must be taken for the arch-specific nokaslr parsing. Search
the bootargs FDT property and the CONFIG_CMDLINE when
CONFIG_CMDLINE_EXTEND is in use.
There are a couple of known use cases for this feature:
1) Switching between stable and development kernel versions, where one
of the versions benefits from additional command line parameters,
such as debugging options.
2) Specifying additional command line parameters, for additional tuning
or debugging, when the bootloader does not offer an interactive mode.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200921191557.350256-3-tyhicks@linux.microsoft.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Don't ask for *the* command line string to search for "nokaslr" in
kaslr_early_init(). Instead, tell a helper function to search all the
appropriate command line strings for "nokaslr" and return the result.
This paves the way for searching multiple command line strings without
having to concatenate the strings in early init.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200921191557.350256-2-tyhicks@linux.microsoft.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Directly using the kimage_voffset variable is fine for now, but
will become more problematic as we start distrusting EL1.
Instead, patch the kimage_voffset into the HYP text, ensuring
we don't have to load an untrusted value later on.
Signed-off-by: Marc Zyngier <maz@kernel.org>
With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
Task scheduler behavior depends on frequency invariance (FI) support and
the resulting invariant load tracking signals. For example, in order to
make accurate predictions across CPUs for all performance states, Energy
Aware Scheduling (EAS) needs frequency-invariant load tracking signals
and therefore it has a direct dependency on FI. This dependency is known,
but EAS enablement is not yet conditioned on the presence of FI during
the built of the scheduling domain hierarchy.
Before this is done, the following must be considered: while
arch_scale_freq_invariant() will see changes in FI support and could
be used to condition the use of EAS, it could return different values
during system initialisation.
For arm64, such a scenario will happen for a system that does not support
cpufreq driven FI, but does support counter-driven FI. For such a system,
arch_scale_freq_invariant() will return false if called before counter
based FI initialisation, but change its status to true after it.
If EAS becomes explicitly dependent on FI this would affect the task
scheduler behavior which builds its scheduling domain hierarchy well
before the late counter-based FI init. During that process, EAS would be
disabled due to its dependency on FI.
Two points of future early calls to arch_scale_freq_invariant() which
would determine EAS enablement are:
- (1) drivers/base/arch_topology.c:126 <<update_topology_flags_workfn>>
rebuild_sched_domains();
This will happen after CPU capacity initialisation.
- (2) kernel/sched/cpufreq_schedutil.c:917 <<rebuild_sd_workfn>>
rebuild_sched_domains_energy();
-->rebuild_sched_domains();
This will happen during sched_cpufreq_governor_change() for the
schedutil cpufreq governor.
Therefore, before enforcing the presence of FI support for the use of EAS,
ensure the following: if there is a change in FI support status after
counter init, use the existing rebuild_sched_domains_energy() function to
trigger a rebuild of the scheduling and performance domains that in turn
will determine the enablement of EAS.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lkml.kernel.org/r/20201027180713.7642-3-ionela.voinescu@arm.com
We don't need to check for MTE support before checking the flag
because it can only be set if the hardware supports MTE. As a result
we can unconditionally check the flag bit which is expected to be in
a register and therefore the check can be done in a single instruction
instead of first needing to load the hwcaps.
On a DragonBoard 845c with a kernel built with CONFIG_ARM64_MTE=y with
the powersave governor this reduces the cost of a kernel entry/exit
(invalid syscall) from 465.1ns to 463.8ns.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If4dc3501fd4e4f287322f17805509613cfe47d24
Link: https://lore.kernel.org/r/20201118032051.1405907-1-pcc@google.com
[catalin.marinas@arm.com: remove IS_ENABLED(CONFIG_ARM64_MTE)]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Even though support for EFI boot remains entirely optional for arm64,
it is unlikely that we will ever be able to repurpose the image header
fields that the EFI loader relies on, i.e., the magic NOP at offset
0x0 and the PE header address at offset 0x3c.
So let's factor out the differences into a 'efi_signature_nop' macro and
a local symbol representing the PE header address, and move the
conditional definitions into efi-header.S, taking into account whether
CONFIG_EFI is enabled or not. While at it, switch to a signature NOP
that behaves more like a NOP, i.e., one that only clobbers the
flags.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201117124729.12642-4-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We no longer map the first 64 KB of the kernel image, as there is nothing
there that we ever need to refer back to once the kernel has booted. Even
though facilities like kallsyms are very careful to only refer to the
region that starts at _stext when mapping virtual addresses to symbol
names, let's avoid any confusion by switching to local .L prefixed symbol
names for the EFI header, as none of them have any significance to the
rest of the kernel.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201117124729.12642-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In a previous patch, we increased the size of the EFI PE/COFF header
to 64 KB, which resulted in the _stext symbol to appear at a fixed
offset of 64 KB into the image.
Since 64 KB is also the largest page size we support, this completely
removes the need to map the first 64 KB of the kernel image, given that
it only contains the arm64 Image header and the EFI header, neither of
which we ever access again after booting the kernel. More importantly,
we should avoid an executable mapping of non-executable and not entirely
predictable data, to deal with the unlikely event that we inadvertently
emitted something that looks like an opcode that could be used as a
gadget for speculative execution.
So let's limit the kernel mapping of .text to the [_stext, _etext)
region, which matches the view of generic code (such as kallsyms) when
it reasons about the boundaries of the kernel's .text section.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201117124729.12642-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The spectre-v3a mitigation is split between cpu_errata.c and spectre.c,
with the former handling detection of the problem and the latter handling
enabling of the workaround.
Move the detection logic alongside the enabling logic, like we do for the
other spectre mitigations.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-10-will@kernel.org
