On NVIDIA SoC's the ARM SMMU needs to interact with the memory
controller in order to map memory clients to the corresponding stream
IDs. Document how the nvidia,memory-controller property can be used to
achieve this.
Note that this is a backwards-incompatible change that is, however,
necessary to ensure correctness. Without the new property, most of the
devices would still work but it is not guaranteed that all will.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220429082243.496000-2-thierry.reding@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
ATSHA204 is predecessor of ATSHA204A which supports less features and some
of them are slightly different.
Introduce a new compatible string for ATSHA204 cryptochip "atmel,atsha204".
Current version of Linux kernel driver atmel-sha204a.c implements only hw
random number generator which is same in both ATSHA204 and ATSHA204A
cryptochips. So driver already supports also ATSHA204 hw generator, so just
simply extends list of compatible strings.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull devicetree fixes from Rob Herring:
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
* tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pci: apple,pcie: Drop max-link-speed from example
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
dt-bindings: ufs: cdns,ufshc: Add power-domains
Apple SoC NVMe driver and dependencies:
- RTKit IPC library required to boot and communicate with
co-processors embedded inside Apple SoCs
- SART DMA address filter required to allow some DMA transactions for
the NVMe co-processor
- NVMe platform driver
The following minor changes since v3 on the mailing list have been
folded in:
- sart: %llx -> %pa for a phys_addr_t
- rtkit:/sart: Drop IS_ENABLED inside headers
- rtkit: Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- nvme: Set NVME_REQ_CANCELLED in the timeout handler
- nvme: Use DEFINE_SIMPLE_DEV_PM_OPS instead of #ifdef CONFIG_PM_SLEEP
* tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux:
nvme-apple: Add initial Apple SoC NVMe driver
dt-bindings: nvme: Add Apple ANS NVMe
soc: apple: Add SART driver
dt-bindings: iommu: Add Apple SART DMA address filter
soc: apple: Add RTKit IPC library
soc: apple: Always include Makefile
Link: https://lore.kernel.org/r/20220505154020.84638-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The R329 and D1 SoCs each contain an LRADC with a programming interface
compatible to earlier LRADCs. However, the LRADC now has its own clock
gate and reset line, instead of being always active.
To support this, add clock/reset properties to the binding, and require
them for the variant in the new SoCs.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220414002349.24332-1-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.19, please pull the following:
- Oleksij fixes the ethernet node name for the USB Ethernet adapter on
BCM283x (Raspberry Pi 1/2/3) platforms
- Kuldeep fixes the PL022 SPI controller clock names to conform to the
binding
- Rafal updates the various BCM5301X (Northstar) Device Tree include
files to be dtsschema conforming for pinctrl, NAND
- Arinc adds the Asus RT-AC88U binding, removes some unnecessary
properties of the Ethernet switch DT node, populates the correct PHY
interface for port 5 of the switch, adds support for fetching the MAC
address from the NVMEM provider and finally disables gmac0 on that
device which is unused
- Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio
line names conforming to the printed circuit board layout
- Krzysztof updates various Broadcom DTS files to have a conforming SPI
nor Device Tree node
- Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2
wireless routers based on the BCM4708 SoC
- William adds support for the BCM47622 ARMv7 Broadband SoC and provides
a basic DTS to boot upstream Linux on such a system
* tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
ARM: dts: add dts files for bcmbca soc 47622
dt-bindings: arm: add bcmbca device tree binding document
ARM: dts: bcm283x: Align ETH_CLK GPIO line name
ARM: dts: bcm283x: Remove gpio line name NC
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U
ARM: dts: broadcom: align SPI NOR node name with dtschema
dt-bindings: arm: bcm: add bindings for Asus RT-AC88U
ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
dt-bindings: arm: bcm: create new description for BCM53016
dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings
ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U
ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U
ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U
ARM: dts: BCM5301X: Fix DTC warning for NAND node
ARM: dts: BCM5301X: Update pin controller node name
...
Link: https://lore.kernel.org/r/20220504210942.1838248-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm FVP/Juno device tree updates for v5.19
The main and bulk of the change is the addition of new platform
Arm corstone1000(both FVP and FPGA versions). Also, there are
addition of Coresight Cross Trigger Interface(CTI) support on Juno,
fix for incorrect SCMI power domain IDs, addition of virtio-rng
on FVP which is default disabled as it works only on latest versions
of the FVP model.
Other miscellanous changes include dropping of useless
'dma-channels/requests' properties and updating virtio device
node names as per dtschema.
* tag 'juno-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Drop useless 'dma-channels/requests' properties
arm64: dts: fvp: Align virtio device node names with dtschema
arm64: dts: fvp: Add virtio-rng support
arm64: dts: Add Arm corstone1000 platform support
dt-bindings: Add Arm corstone1000 platform
arm64: dts: juno: add CTI entries to device tree
arm64: dts: juno: Fix SCMI power domain IDs for ETF and CS funnel
Link: https://lore.kernel.org/r/20220504112917.3492009-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: reset: stm32mp15: rename RST_SCMI define
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
dt-bindings: rcc: Add optional external ethernet RX clock properties
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
ARM: dts: stm32: add support for Protonic PRTT1x boards
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
dt-bindings: arm: stm32: correct blank lines
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
...
Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reset controller updates for v5.19
Add Meson-S4 SoC reset controller support to reset-meson, AST2600 LPC
reset controller support to reset-simple, and R9A07G054 USBPHY reset
controller support to reset-rzg2l-usbphy-ctrl. Add ACPI _RST support to
device_reset(), simplify the uniphier-glue reset driver using bulk API
and devres and clean up its dt-bindings docs. Convert most dt-bindings
docs from txt to yaml.
* tag 'reset-for-v5.19' of git://git.pengutronix.de/pza/linux:
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
dt-bindings: reset: nuvoton,npcm-reset: Convert to yaml
dt-bindings: reset: lantiq,reset: Convert to yaml
dt-bindings: reset: bitmain,bm1880-reset: Convert to yaml
dt-bindings: reset: berlin: Convert to yaml
dt-bindings: reset: ath79: Convert to yaml
dt-bindings: reset: amlogic,meson-axg-audio-arb: Convert to yaml
dt-bindings: reset: uniphier-glue: Clean up clocks, resets, and their names using compatible string
reset: Kconfig: Make RESET_RZG2L_USBPHY_CTRL depend on ARCH_RZG2L
reset: ACPI reset support
reset: simple: Add AST2600 compatible
reset: reset-meson: add support for the Meson-S4 SoC Reset Controller
dt-bindings: reset: add bindings for the Meson-S4 SoC Reset Controller
dt-bindings: reset: Add compatible for Meson-S4 Reset Controller
reset: uniphier-glue: Use devm_add_action_or_reset()
reset: uniphier-glue: Use reset_control_bulk API
Link: https://lore.kernel.org/r/20220503160057.46625-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The unit address does not make sense in all cases the multi-led node is
used, e.g. for the upcoming PWM multi-color LED driver.
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The generic properties, used in most of the drivers and defined in
generic dma-common DT bindings, are 'dma-channels' and 'dma-requests'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.Core MX8M Plus is an EDIMM SoM based on NXP i.MX8M Plus from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board from Engicam.
i.Core MX8M Plus needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Plus EDIMM2.2 Starter Kit.
Add bindings for it.
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add toradex,verdin-imx8mp for the Verdin iMX8M Plus modules, its nonwifi
and wifi variants and the carrier boards (both Dahlia and the Verdin
Development Board) they may be mated in.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
