Another round from new cases in 5.19-rc of removing redundant
minItems/maxItems when 'items' list is specified. This time it is in
if/then schemas as the meta-schema was failing to check this case.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220606225137.1536010-1-robh@kernel.org
Most Allwinner SoCs have just one input clock to drive the watchdog
peripheral. So far this is the 24 MHz "HOSC" oscillator, divided down
internally to 32 KHz.
The F1C100 series watchdog however uses the unchanged 32 KHz "LOSC" as
its only clock input, which has the same effect, but let's the binding
description mismatch.
Change the binding description to name the clocks more loosely, so both
the LOSC and divided HOSC match the description. As the fixed clock names
now make less sense, drop them from SoCs supporting just one clock
input, they were not used by any DT anyway.
For the newer SoCs, supporting a choice of two input clocks, we keep
both the description and clock-names requirement.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220317162349.739636-3-andre.przywara@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Parse compatible as expected for modern QCOMs.
Fixes warnings as:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: watchdog@17980000: compatible: ['qcom,apss-wdt-sdm845', 'qcom,kpss-wdt'] is too long
From schema: Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: watchdog@17980000: compatible: Additional items are not allowed ('qcom,kpss-wdt' was unexpected)
From schema: Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220111212310.97566-1-david@ixit.cz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Pull watchdog updates from Wim Van Sebroeck:
- add support for BCM4908
- renesas_wdt: add R-Car Gen4 support
- improve watchdog_dev function documentation
- sp5100_tco: replace the cd6h/cd7h port I/O with MMIO accesses during
initialization
- several other small improvements and fixes
* tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
Watchdog: sp5100_tco: Enable Family 17h+ CPUs
Watchdog: sp5100_tco: Add initialization using EFCH MMIO
Watchdog: sp5100_tco: Refactor MMIO base address initialization
Watchdog: sp5100_tco: Move timer initialization into function
watchdog: ixp4xx: Implement restart
watchdog: orion_wdt: support pretimeout on Armada-XP
watchdog: allow building BCM7038_WDT for BCM4908
watchdog: renesas_wdt: Add R-Car Gen4 support
dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
watchdog: Improve watchdog_dev function documentation
watchdog: aspeed: add nowayout support
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
watchdog: imx2_wdg: Alow ping on suspend
Pull devicetree updates from Rob Herring:
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the
source level syntax information. There's a bunch of schema fixes as a
result of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial
filename or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated
HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass
messages also now print by default at PR_INFO level to help test
automation.
* tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits)
dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable
dt-bindings: nvmem: add U-Boot environment variables binding
dt-bindings: ufs: qcom: Add SM6350 compatible string
dt-bindings: dmaengine: sifive,fu540-c000: include generic schema
dt-bindings: gpio: pca95xx: drop useless consumer example
Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"
dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent'
dt-bindings: gnss: Add two more chips
dt-bindings: gnss: Rewrite sirfstar binding in YAML
dt-bindings: gnss: Modify u-blox to use common bindings
dt-bindings: gnss: Rewrite common bindings in YAML
dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible
dt-bindings: ata: ahci-platform: Add power-domains property
dt-bindings: ata: ahci-platform: Convert DT bindings to yaml
dt-bindings: kbuild: Use DTB files for validation
dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate
dt-bindings: Add QEMU virt machine compatible
dt-bindings: arm: Convert QEMU fw-cfg to DT schema
dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
dt-bindings: i2c: convert i2c-at91 to json-schema
...
Pull watchdog updates from Wim Van Sebroeck:
- New device support:
- Watchdog Timer driver for RZ/G2L
- Realtek Otto watchdog timer
- Apple SoC watchdog driver
- Fintek F81966
- Remove BCM63XX_WDT after support for this SoC was added to
BCM7038_WDT
- Improvements of the BCM7038_WDT and s3c2410_wdt code
- Several other fixes and improvements
* tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: msc313e: Check if the WDT was running at boot
watchdog: Add Apple SoC watchdog driver
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
watchdog: s3c2410: Fix getting the optional clock
watchdog: s3c2410: Use platform_get_irq() to get the interrupt
dt-bindings: watchdog: atmel: Add missing 'interrupts' property
watchdog: mtk_wdt: use platform_get_irq_optional
watchdog: Add Watchdog Timer driver for RZ/G2L
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: da9063: Add hard dependency on I2C
watchdog: Add Realtek Otto watchdog timer
dt-bindings: watchdog: Realtek Otto WDT binding
watchdog: s3c2410: Add Exynos850 support
watchdog: da9063: use atomic safe i2c transfer in reset handler
watchdog: davinci: Use div64_ul instead of do_div
watchdog: Remove BCM63XX_WDT
MIPS: BCM63XX: Provide platform data to watchdog device
watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
watchdog: Allow building BCM7038_WDT for BCM63XX
watchdog: bcm7038_wdt: Support platform data configuration
...
Pull devicetree updates from Rob Herring:
"Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom
Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt
controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in
preparation to move to validating DTB files directly (instead of
intermediate YAML representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes"
* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
dt-bindings: net: mdio: Drop resets/reset-names child properties
dt-bindings: clock: samsung: convert S5Pv210 to dtschema
dt-bindings: clock: samsung: convert Exynos5410 to dtschema
dt-bindings: clock: samsung: convert Exynos5260 to dtschema
dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
dt-bindings: clock: samsung: convert Exynos7 to dtschema
dt-bindings: clock: samsung: convert Exynos5433 to dtschema
dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
dt-bindings: clock: imx5: Drop clock consumer node from example
dt-bindings: Drop required 'interrupt-parent'
dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
dt-bindings: net: stm32-dwmac: Make each example a separate entry
dt-bindings: net: Cleanup MDIO node schemas
...
Exynos850 SoC has two CPU clusters:
- cluster 0: contains CPUs #0, #1, #2, #3
- cluster 1: contains CPUs #4, #5, #6, #7
Each cluster has its own dedicated watchdog timer. Those WDT instances
are controlled using different bits in PMU registers, new
"samsung,index" property is added to tell the driver which bits to use
for defined watchdog node.
Also on Exynos850 the peripheral clock and the source clock are two
different clocks. Provide a way to specify two clocks in watchdog device
tree node.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-3-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
With 'unevaluatedProperties' support implemented, the ti,rti-wdt example
has the following warning:
/home/rob/proj/git/linux-dt/.build-arm64/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.example.dt.yaml: watchdog@2200000: Unevaluated properties are not allowed ('assigned-clock-parents' was unexpected)
The problem is the schema has a typo in 'assigned-clocks-parents'. As
it is not required to list assigned clocks in bindings, just drop the
property definitions to fix this.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211206174028.2294330-1-robh@kernel.org
"maxItems" is not needed with an "items" list
Fixes:
$ DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml make dtbs_check
Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml: properties:clocks: {'required': ['maxItems']} is not allowed for {'minItems': 1, 'maxItems': 2, 'items': [{'description': 'High-frequency oscillator input, divided internally'}, {'description': 'Low-frequency oscillator input, only found on some variants'}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
...
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211029142443.68779-1-david@ixit.cz
D1 keeps the same register layout and clock sources as the R329, but it
adds a key field which must be set to update the watchdog's "CFG" and
"MODE" registers. Therefore it is not backward-compatible.
Similarly to the R329, the D1 has three watchdog instances, and only one
of them has the "soft reset" registers. So that instance needs an extra
compatible string.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210902225750.29313-3-samuel@sholland.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
divided by 750. However, starting with R329, LOSC (OSC32k) is added as
an alternative clock source, with a bit to switch between them.
Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
cycle counts to keep the timeouts independent of the clock source. This
keeps the programming interface backward-compatible.
Furthermore, the R329 has two watchdogs: one for use by the ARM CPUs
at 0x20000a0, and a second one for use by the DSPs at 0x7020400. The
first of these adds two more new registers, to allow software to
immediately assert the SoC reset signal. Add an additional "-reset"
suffix to signify the presence of this feature.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210902225750.29313-2-samuel@sholland.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
