Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
Add arch bcmbca device tree binding document for Broadcom ARM based
broadband SoC chipsets. In this change, only BCM47622 is added. Other
chipsets will be added in the future.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Create a new description for BCM53016 and move Meraki MR32 under it.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Currently only the SoC names are added. This patch expands these to add
the devices.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull devicetree updates from Rob Herring:
- Refactor powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
powerpc: Free fdt on error in elf64_load()
of: overlay: Fix kerneldoc warning in of_overlay_remove()
of: linux/of.h: fix kernel-doc warnings
of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
docs: dt: update writing-schema.rst references
dt-bindings: media: venus: Add sm8250 dt schema
of: base: Fix spelling issue with function param 'prop'
docs: dt: Add DT API documentation
of: Add missing 'Return' section in kerneldoc comments
of: Fix kerneldoc output formatting
docs: dt: Group DT docs into relevant sub-sections
docs: dt: Make 'Devicetree' wording more consistent
docs: dt: writing-schema: Include the example schema in the doc build
docs: dt: writing-schema: Remove spurious indentation
dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
dt-bindings: media: video-interfaces: Drop the example
devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
...
Pull ARM devicetree updates from Arnd Bergmann:
"There are six new SoCs added this time.
Apple M1 and Nuvoton WPCM450 have separate branches because they are
new SoC families that require changes outside of device tree files.
The other four are variations of already supported chips and get
merged through this branch:
- STMicroelectronics STM32H750 is one of many variants of STM32
microcontrollers based on the Cortex-M7 core.
This is particularly notable since we rarely add support for new
MMU-less chips these days. In this case, the board that gets added
along with the platform is not a SoC reference platform but the
"Art Pi" (https://art-pi.gitee.io/website/) machine that was
originally design for the RT-Thread RTOS.
- NXP i.MX8QuadMax is a variant of the growing i.MX8
embedded/industrial SoC family, using two Cortex-A72 and four
Cortex-A53 cores.
It gets added along with its reference board, the "NXP i.MX8QuadMax
Multisensory Enablement Kit".
- Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon
7c) that is used in some Chromebooks and Windows laptops.
Only a reference board is added for the moment.
- TI AM64x Sita4ra is a new version of the K3 SoC family for
industrial control, motor control, remote IO, IoT gateway etc.,
similar to the older AM65x family.
Two reference machines are added alongside.
Among the newly added machines, there is a very clear skew towards
64-bit machines now, with 12 32-bit machines compared to 23 64-bit
machines. The full list sorted by SoC is:
- ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
- Allwinner A10: Topwise A721 Tablet
- Amlogic GXL: MeCool KII TV box
- Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
- Broadcom BCM4908: TP-Link Archer C2300 V1 router
- MStar SSD202D: M5Stack UnitV2 camera
- Marvell Armada 38x: ATL-x530 ethernet switch
- Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311, Asus Flip
CM3, Asus Detachable CM3
- Mediatek MT8516/MT8183: OLogic Pumpkin Board
- NXP i.MX7: reMarkable Tablet
- NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
- Nuvoton NPCM730: Quanta GBS BMC
- Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
- Qualcomm MSM8998: OnePlus 5/5T phones
- Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
- Rockchip RK3399: NanoPi R4S board
- STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM, EDIMM2.2
Starter Kit, Carrier, SOM
- TI AM65: Siemens SIMATIC IOT2050 gateway
There is notable work going into extending already supported machines
and SoCs:
- ASpeed AST2500
- Allwinner A23, A83t, A31, A64, H6
- Amlogic G12B
- Broadcom BCM4908
- Marvell Armada 7K/8K/CN91xx
- Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
- NXP i.MX8Q, i.MX8MM, i.MX8MP
- Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
- Renesas R-Car M3, V3U
- Rockchip RK3328, RK3399
- STEricsson U8500
- STMicroelectronics STM32MP141
- Samsung Exynos 4412
- TI K3-AM65, K3-J7200
- TI OMAP3
Among the treewide cleanups and bug fixes, two parts stand out:
- There are a number of cleanups for issues pointed out by 'make
dtbs_check' this time, and I expect more to come in the future as
we increasingly check for regressions.
- After a change to the MMC subsystem that can lead to unpredictable
device numbers, several platforms add 'aliases' properties for
these to give each MMC controller a fixed number"
* tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (516 commits)
dt-bindings: mali-bifrost: add dma-coherent
arm64: dts: amlogic: misc DT schema fixups
arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
ARM: dts: mstar: Add a dts for M5Stack UnitV2
dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2
dt-bindings: vendor-prefixes: Add vendor prefix for M5Stack
arm64: dts: mt8183: fix dtbs_check warning
arm64: dts: mt8183-pumpkin: fix dtbs_check warning
ARM: dts: aspeed: tiogapass: add hotplug controller
ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
ARM: dts: aspeed: Rainier: Update to pass 2 hardware
ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
ARM: dts: qcom: sdx55: add IPA information
ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
...
The PWM bus controlling the fan in RPi's official PoE hat can only be
controlled by the board's co-processor.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
* tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: add config for Broadcom BCM4908 SoCs
arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
dt-bindings: arm: bcm: document BCM4908 bindings
Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
BCM4908 is a new family that includes BCM4906, BCM4908 and BCM49408.
It's mostly used in home routers and often replaces Northstar in vendors
portfolio.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.
However, simple-bus also comes with some constraints, like having the ranges,
our case.
Let's switch to simple-mfd that provides the same probing logic without
those constraints.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
mark the Meraki MR32 and its SoC (BCM53016) as supported
in the bindings documentation file.
A quick look on Broadcom BCM5301x series umbrella website reveals:
<https://www.broadcom.com/products/embedded-and-networking-processors/communications/bcm5301x>
"BCM53012 and BCM53016 with dual-core Cortex-A9 CPU at 1 GHz, 256KB L2 cache,
16-bit DDR2 interface, USB3 integrated switch, GPHYs and packet accelerator".
As far as I can tell, Broadcom considers the SoC to be
a version of the BCM53012.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The RaspberryPi firmware binding uses two compatible, include simple-bus.
The select statement generated by default will thus select any node that
has simple-bus, not all of them being the raspberrypi firmware node.
This results in warnings being wrongfully reported. Let's add a custom
select statement to fix that.
Fixes: d4c708c032 ("dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200626115433.125735-1-maxime@cerno.tech
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the commits are for additional hardware support and minor
fixes for existing machines for all the usual platforms: qcom,
amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
sunxi, broadcom, omap, and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation. Andre
Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into dts
files, for many devices that relied on a mix of auxiliary data in
addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants,
along with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
on the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"
* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
ARM: dts: ux500: Fix missing node renames
arm64: dts: Revert "specify console via command line"
MAINTAINERS: Update Calxeda Highbank maintainership
arm: dts: calxeda: Group port-phys and sgpio-gpio items
arm: dts: calxeda: Fix interrupt grouping
arm: dts: calxeda: Provide UART clock
arm: dts: calxeda: Basic DT file fixes
arm64: dts: specify console via command line
ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
ARM: dts: gemini: Add thermal zone to DIR-685
ARM: dts: gemini: Rename IDE nodes
ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
arm64: dts: khadas-vim3: add SPIFC controller node
...
Consolidate and move the 'secondary-boot-reg' property from the 3
existing binding documents into the main cpus.yaml documentation, also
make sure that the property is enforced when relevant.
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update Vulcan SoC family binding document for boards/SoCs to use YAML.
Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM11351 SoC family binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM4708 SoC family binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM23550 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM21664 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Stingray SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Northstar 2 SoC binding document for boards/SoCs to
use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Northstar Plus SoC binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Hurricane 2 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadocom Cygnus SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Several DT references got broken due to txt->yaml conversion.
Those are auto-fixed by running:
scripts/documentation-file-ref-check --fix
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the BCM2835/6/7 SoC bindings to DT schema format using json-schema.
All the other Broadcom boards are maintained by Florian Fainelli.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh@kernel.org>
This adds the root properties for Raspberry Pi Compute Module 3 and
Compute Module 3 Lite.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
