fixes.2020.04.27a: Miscellaneous fixes.
kfree_rcu.2020.04.27a: Changes related to kfree_rcu().
rcu-tasks.2020.04.27a: Addition of new RCU-tasks flavors.
stall.2020.04.27a: RCU CPU stall-warning updates.
torture.2020.05.07a: Torture-test updates.
This commit converts three ULONG_CMP_LT() invocations in rcutorture to
time_before() to reflect the fact that they are comparing timestamps to
the jiffies counter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Make it a bit easier to apply KASAN to rcutorture runs with a new --kasan
argument, again leveraging the config_override_param() bash function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a few lines of code by also using the bash
config_override_param() to set the initial list of Kconfig options from
the CFcommon file. While in the area, it makes this function capable of
update-in-place on the file containing the cumulative Kconfig options,
thus avoiding annoying changes when adding another source of options.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit applies config_override_param() to allow scenario-specific
Kconfig options to override those in CFcommon. This in turn will allow
additional Kconfig options to be placed in CFcommon, for example, an
option common to all but a few scenario can be placed in CFcommon and
then overridden in those few scenarios. Plus this change saves one
whole line of code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, attempting to override a --kcsan default with a --kconfig
option might or might not work. However, it would be good to allow the
user to adjust the --kcsan defaults, for example, to specify a different
time for CONFIG_KCSAN_REPORT_ONCE_IN_MS. This commit therefore uses the
new config_override_param() bash function to apply the --kcsan defaults
and then apply the --kconfig options, which allows this overriding
to occur.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit introduces a config_override_param() bash function that
folds in an additional set of Kconfig options. This is initially applied
to fold in the --kconfig kvm.sh parameter, but later commits will also
apply it to the Kconfig options added by the --kcsan kvm.sh parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The #CHECK# directives that can be present in CFcommon and in the
rcutorture scenario Kconfig files are both copied to ConfigFragment
and grepped out of the two directive files and added to ConfigFragment.
This commit therefore removes the redundant "grep" commands and takes
advantage of the consequent opportunity to simplify redirection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit fixes the following sparse warning:
kernel/rcu/rcutorture.c:1695:16: warning: symbol 'rcu_fwds' was not declared. Should it be static?
kernel/rcu/rcutorture.c:1696:6: warning: symbol 'rcu_fwd_emergency_stop' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The KCSAN tool emits a great many warnings for current kernels, for
example, a one-hour run of the full set of rcutorture scenarios results
in no fewer than 3252 such warnings, many of which are duplicates
or are otherwise closely related. This commit therefore introduces
a kcsan-collapse.sh script that maps these warnings down to a set of
function pairs (22 of them given the 3252 individual warnings), placing
the resulting list in decreasing order of frequency of occurrence into
a kcsan.sum file. If any KCSAN warnings were produced, the pathname of
this file is emitted at the end of the summary of the rcutorture runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although the existing --kconfig argument can be used to run KCSAN for
an rcutorture test, it is not as straightforward as one might like:
--kconfig "CONFIG_DEBUG_INFO=y CONFIG_KCSAN=y \
CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n \
CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n \
CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000 \
CONFIG_KCSAN_VERBOSE=y CONFIG_KCSAN_INTERRUPT_WATCHER=y"
This commit therefore adds a "--kcsan" argument that emulates the above
--kconfig command. Note that if you specify a Kconfig option using
-kconfig that conflicts with one that --kcsan adds, you get whatever
the script and the build system decide to give you.
Cc: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit provides an rcutorture.stall_gp_kthread module parameter
to allow rcutorture to starve the grace-period kthread. This allows
testing the code that detects such starvation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The number of CPUs is tuned to allow "4*CFLIST TREE10" on a large system,
up from "3*CFLIST TREE10" previously.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit aids testing of RCU task stall warning messages by adding
an rcutorture.stall_cpu_block module parameter that results in the
induced stall sleeping within the RCU read-side critical section.
Spinning with interrupts disabled is still available via the
rcutorture.stall_cpu_irqsoff module parameter, and specifying neither
of these two module parameters will spin with preemption disabled.
Note that sleeping (as opposed to preemption) results in additional
complaints from RCU at context-switch time, so yet more testing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When using -Wextra, gcc complains about torture_preempt_schedule()
when its definition is empty (i.e., when CONFIG_PREEMPTION is not
set/enabled). Fix these warnings by adding an empty do-while block
for that macro when CONFIG_PREEMPTION is not set.
Fixes these build warnings:
../kernel/locking/locktorture.c:119:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:166:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:337:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:490:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:528:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:553:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
I have verified that there is no object code change (with gcc 7.5.0).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
The n_barrier_successes, n_barrier_attempts, and
n_rcu_torture_barrier_error variables are updated (without access
markings) by the main rcu_barrier() test kthread, and accessed (also
without access markings) by the rcu_torture_stats() kthread. This of
course can result in KCSAN complaints.
Because the accesses are in diagnostic prints, this commit uses
data_race() to excuse the diagnostic prints from the data race. If this
were to ever cause bogus statistics prints (for example, due to store
tearing), any misleading information would be disambiguated by the
presence or absence of an rcutorture splat.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely and due to the mild consequences of the
failure, namely a confusing rcutorture console message.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
System hangs or killed rcutorture guest OSes can result in truncated
"Reader Pipe:" lines, which can in turn result in false-positive
reader-batch near-miss warnings. This commit therefore adjusts the
reader-batch checks to account for possible line truncation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds stubs for KCSAN's data_race(), ASSERT_EXCLUSIVE_WRITER(),
and ASSERT_EXCLUSIVE_ACCESS() macros to allow code using these macros to
move ahead.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When all quiescent states have been seen, it is normally the grace-period
kthread that is in trouble. Although the existing stack trace from
the current CPU might possibly provide useful information, experience
indicates that there is too much noise for this to be worthwhile.
This commit therefore removes this stack trace from the output.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the grace-period kthread is starved, idle threads' extended quiescent
states are not reported. These idle threads thus wrongly appear to
be blocking the current grace period. This commit therefore tags such
idle threads as probable false positives when the grace-period kthread
is being starved.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although the accesses used to determine whether or not an expedited
stall should be printed are an integral part of the concurrency algorithm
governing use of the corresponding variables, the values that are simply
printed are ancillary. As such, it is best to use data_race() for these
accesses in order to provide the greatest latitude in the use of KCSAN
for the other accesses that are an integral part of the algorithm. This
commit therefore changes the relevant uses of READ_ONCE() to data_race().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit replaces the schedule_on_each_cpu(ftrace_sync) instances
with synchronize_rcu_tasks_rude().
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
[ paulmck: Make Kconfig adjustments noted by kbuild test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit allows TASKS_TRACE_RCU to be used independently of TASKS_RCU
and vice versa.
[ paulmck: Fix conditional compilation per kbuild test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a failure-return count for smp_call_function_single(),
and adds this to the console messages for rcutorture writer stalls and at
the end of rcutorture testing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a TRACE02 scenario which enables preemption and RCU
Tasks Trace IPIs, more specifically, disabling heavyweight readers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a counter for the number of times the quiescent state
was an idle task associated with an offline CPU, and prints this count
at the end of rcutorture runs and at stall time.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds counts of the number of calls and number of successful
calls to rcu_dynticks_zero_in_eqs(), which are printed at the end
of rcutorture runs and at stall time. This allows evaluation of the
effectiveness of rcu_dynticks_zero_in_eqs().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit scans the CPUs, adding each CPU's idle task to the list of
tasks that need quiescent states.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The idle task corresponding to an offline CPU can appear to be running
while that CPU is offline. This commit therefore adds checks for this
situation, treating it as a quiescent state. Because the tasklist scan
and the holdout-list scan now exclude CPU-hotplug operations, readers
on the CPU-hotplug paths are still waited for.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit disables CPU hotplug across RCU tasks trace scans, which
is a first step towards correctly recognizing idle tasks "running" on
offline CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_read_unlock_trace() can invoke rcu_read_unlock_trace_special(),
which in turn can call wake_up(). Therefore, if any scheduler lock is
held across a call to rcu_read_unlock_trace(), self-deadlock can occur.
This commit therefore uses the irq_work facility to defer the wake_up()
to a clean environment where no scheduler locks will be held.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
[ paulmck: Update #includes for m68k per kbuild test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Systems running CPU-bound real-time task do not want IPIs sent to CPUs
executing nohz_full userspace tasks. Battery-powered systems don't
want IPIs sent to idle CPUs in low-power mode. Unfortunately, RCU tasks
trace can and will send such IPIs in some cases.
Both of these situations occur only when the target CPU is in RCU
dyntick-idle mode, in other words, when RCU is not watching the
target CPU. This suggests that CPUs in dyntick-idle mode should use
memory barriers in outermost invocations of rcu_read_lock_trace()
and rcu_read_unlock_trace(), which would allow the RCU tasks trace
grace period to directly read out the target CPU's read-side state.
One challenge is that RCU tasks trace is not targeting a specific
CPU, but rather a task. And that task could switch from one CPU to
another at any time.
This commit therefore uses try_invoke_on_locked_down_task()
and checks for task_curr() in trc_inspect_reader_notrunning().
When this condition holds, the target task is running and cannot move.
If CONFIG_TASKS_TRACE_RCU_READ_MB=y, the new rcu_dynticks_zero_in_eqs()
function can be used to check if the specified integer (in this case,
t->trc_reader_nesting) is zero while the target CPU remains in that same
dyntick-idle sojourn. If so, the target task is in a quiescent state.
If not, trc_read_check_handler() must indicate failure so that the
grace-period kthread can take appropriate action or retry after an
appropriate delay, as the case may be.
With this change, given CONFIG_TASKS_TRACE_RCU_READ_MB=y, if a given
CPU remains idle or a given task continues executing in nohz_full mode,
the RCU tasks trace grace-period kthread will detect this without the
need to send an IPI.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit provides a new TASKS_TRACE_RCU_READ_MB Kconfig option that
enables use of read-side memory barriers by both rcu_read_lock_trace()
and rcu_read_unlock_trace() when the are executed with the
current->trc_reader_special.b.need_mb flag set. This flag is currently
never set. Doing that is the subject of a later commit.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a grace-period count and a count of IPIs sent since
boot, which is printed in response to rcutorture writer stalls and at
the end of rcutorture testing. These counts will be used to evaluate
various schemes to reduce the number of IPIs sent.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit splits ->trc_reader_need_end by using the rcu_special union.
This change permits readers to check to see if a memory barrier is
required without any added overhead in the common case where no such
barrier is required. This commit also adds the read-side checking.
Later commits will add the machinery to properly set the new
->trc_reader_special.b.need_mb field.
This commit also makes rcu_read_unlock_trace_special() tolerate nested
read-side critical sections within interrupt and NMI handlers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit provides a rcupdate.rcu_task_ipi_delay kernel boot parameter
that specifies how old the RCU tasks trace grace period must be before
the grace-period kthread starts sending IPIs. This delay allows more
tasks to pass through rcu_tasks_qs() quiescent states, thus reducing
(or even eliminating) the number of IPIs that must be sent.
On a short rcutorture test setting this kernel boot parameter to HZ/2
resulted in zero IPIs for all 877 RCU-tasks trace grace periods that
elapsed during that test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a place to record the grace-period start in jiffies.
This will be used by later commits for debugging purposes and to throttle
IPIs early in the grace period.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes the calls to rcu_tasks_qs() detect and report
quiescent states for RCU tasks trace. If the task is in a quiescent
state and if ->trc_reader_checked is not yet set, the task sets its own
->trc_reader_checked. This will cause the grace-period kthread to
remove it from the holdout list if it still remains there.
[ paulmck: Fix conditional compilation per kbuild test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds state for each RCU-tasks flavor to the rcutorture
writer stall output. The initial state is minimal, but you have to
start somewhere.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Fixes based on feedback from kbuild test robot. ]
This commit pushes the #ifdef CONFIG_TASKS_RCU_GENERIC from
kernel/rcu/update.c to kernel/rcu/tasks.h in order to improve
readability as more APIs are added.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds RCU CPU stall warnings for RCU Tasks Trace. These
dump out any tasks blocking the current grace period, as well as any
CPUs that have not responded to an IPI request. This happens in two
phases, when initially extracting state from the tasks and later when
waiting for any holdout tasks to check in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because RCU does not watch exception early-entry/late-exit, idle-loop,
or CPU-hotplug execution, protection of tracing and BPF operations is
needlessly complicated. This commit therefore adds a variant of
Tasks RCU that:
o Has explicit read-side markers to allow finite grace periods in
the face of in-kernel loops for PREEMPT=n builds. These markers
are rcu_read_lock_trace() and rcu_read_unlock_trace().
o Protects code in the idle loop, exception entry/exit, and
CPU-hotplug code paths. In this respect, RCU-tasks trace is
similar to SRCU, but with lighter-weight readers.
o Avoids expensive read-side instruction, having overhead similar
to that of Preemptible RCU.
There are of course downsides:
o The grace-period code can send IPIs to CPUs, even when those
CPUs are in the idle loop or in nohz_full userspace. This is
mitigated by later commits.
o It is necessary to scan the full tasklist, much as for Tasks RCU.
o There is a single callback queue guarded by a single lock,
again, much as for Tasks RCU. However, those early use cases
that request multiple grace periods in quick succession are
expected to do so from a single task, which makes the single
lock almost irrelevant. If needed, multiple callback queues
can be provided using any number of schemes.
Perhaps most important, this variant of RCU does not affect the vanilla
flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace
readers can operate from idle, offline, and exception entry/exit in no
way enables rcu_preempt and rcu_sched readers to do so.
The memory ordering was outlined here:
https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/
This effort benefited greatly from off-list discussions of BPF
requirements with Alexei Starovoitov and Andrii Nakryiko. At least
some of the on-list discussions are captured in the Link: tags below.
In addition, KCSAN was quite helpful in finding some early bugs.
Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/
Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/
Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andriin@fb.com>
[ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ]
[ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ]
[ paulmck: Fix locking issue reported by rcutorture. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit refactors RCU tasks to allow variants to be added. These
variants will share the current Tasks-RCU tasklist scan and the holdout
list processing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes the flavors of RCU Tasks to use different names
for their kthreads and in their console messages.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a "rude" variant of RCU-tasks that has as quiescent
states schedule(), cond_resched_tasks_rcu_qs(), userspace execution,
and (in theory, anyway) cond_resched(). In other words, RCU-tasks rude
readers are regions of code with preemption disabled, but excluding code
early in the CPU-online sequence and late in the CPU-offline sequence.
Updates make use of IPIs and force an IPI and a context switch on each
online CPU. This variant is useful in some situations in tracing.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
[ paulmck: Apply EXPORT_SYMBOL_GPL() feedback from Qiujun Huang. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Apply review feedback from Steve Rostedt. ]
This commit splits out generic processing from RCU-tasks-specific
processing in order to allow additional flavors to be added. It also
adds a def_bool TASKS_RCU_GENERIC to enable the common RCU-tasks
infrastructure code.
This is primarily, but not entirely, a code-movement commit.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
