The parent pointer node handler must be declared with a NULL
initializer. Before using it, a check must be performed to make
sure that a valid address has been assigned to it.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because of the possible alloc failure of the alloc_page(), it could
return NULL pointer.
And there is a check below the sg_assign_page().
But it will be more logical to move the NULL check before the
sg_assign_page().
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the return value check of kcalloc() to avoid potential
NULL ptr dereference.
Fixes: a8ea8bdd9d ("lib/mpi: Extend the MPI library")
Signed-off-by: Zizhuang Deng <sunsetdzz@gmail.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add MT7986 clock support, include topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Link: https://lore.kernel.org/r/20211217121148.6753-4-sam.shih@mediatek.com
Reviewed-by: Ryder Lee <ryder.lee@kernel.org>
[sboyd@kernel.org: Fix typos in Kconfig, there are more existing typos
from where they were copied from of but whatever]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Refcount leak in ipt_CLUSTERIP rule loading path, from Xin Xiong.
2) Use socat in netfilter selftests, from Hangbin Liu.
3) Skip layer checksum 4 update for IP fragments.
4) Missing allocation of pcpu scratch maps on clone in
nft_set_pipapo, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone
netfilter: nft_payload: do not update layer 4 checksum when mangling fragments
selftests: netfilter: switch to socat for tests using -q option
netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()
====================
Link: https://lore.kernel.org/r/20220106215139.170824-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Revert the patch fixing the DM related crash causing a widespread
regression for kernel ULPs. A proper fix just didn't appear this cycle
due to the holidays
- Missing NULL check on alloc in uverbs
- Double free in rxe error paths
- Fix a new kernel-infoleak report when forming ah_attr's without GRH's in
ucma
-----BEGIN PGP SIGNATURE-----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=A1/J
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Last pull for 5.16, the reversion has been known for a while now but
didn't get a proper fix in time. Looks like we will have several
info-leak bugs to take care of going foward.
- Revert the patch fixing the DM related crash causing a widespread
regression for kernel ULPs. A proper fix just didn't appear this
cycle due to the holidays
- Missing NULL check on alloc in uverbs
- Double free in rxe error paths
- Fix a new kernel-infoleak report when forming ah_attr's without
GRH's in ucma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Don't infoleak GRH fields
RDMA/uverbs: Check for null return of kmalloc_array
Revert "RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow"
RDMA/rxe: Prevent double freeing rxe_map_set()
Add MT7986 clock dt-bindings, include topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217121148.6753-3-sam.shih@mediatek.com
Reviewed-by: Ryder Lee <ryder.lee@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch adds the binding documentation for topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217121148.6753-2-sam.shih@mediatek.com
Reviewed-by: Ryder Lee <ryder.lee@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Appropriately change calls to regmap_update_bits() with regmap_set_bits()
and regmap_clear_bits() for improved readability.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220103143712.46675-2-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a clockgating bit check helper and use it in functions
mtk_cg_bit_is_cleared(), mtk_cg_bit_is_set() to shrink the
file size.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220103143712.46675-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-01-06
We've added 41 non-merge commits during the last 2 day(s) which contain
a total of 36 files changed, 1214 insertions(+), 368 deletions(-).
The main changes are:
1) Various fixes in the verifier, from Kris and Daniel.
2) Fixes in sockmap, from John.
3) bpf_getsockopt fix, from Kuniyuki.
4) INET_POST_BIND fix, from Menglong.
5) arm64 JIT fix for bpf pseudo funcs, from Hou.
6) BPF ISA doc improvements, from Christoph.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
bpf: selftests: Add bind retry for post_bind{4, 6}
bpf: selftests: Use C99 initializers in test_sock.c
net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND()
bpf/selftests: Test bpf_d_path on rdonly_mem.
libbpf: Add documentation for bpf_map batch operations
selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3
xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames
xdp: Move conversion to xdp_frame out of map functions
page_pool: Store the XDP mem id
page_pool: Add callback to init pages when they are allocated
xdp: Allow registering memory model without rxq reference
samples/bpf: xdpsock: Add timestamp for Tx-only operation
samples/bpf: xdpsock: Add time-out for cleaning Tx
samples/bpf: xdpsock: Add sched policy and priority support
samples/bpf: xdpsock: Add cyclic TX operation capability
samples/bpf: xdpsock: Add clockid selection support
samples/bpf: xdpsock: Add Dest and Src MAC setting for Tx-only operation
samples/bpf: xdpsock: Add VLAN support for Tx-only operation
libbpf 1.0: Deprecate bpf_object__find_map_by_offset() API
libbpf 1.0: Deprecate bpf_map__is_offload_neutral()
...
====================
Link: https://lore.kernel.org/r/20220107013626.53943-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In newer SoC we have to clear bit for disabling 48MHz oscillator
clock gate. Remove CLK_GATE_SET_TO_DISABLE flag for proper enable
and disable of 48MHz clock.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-6-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Replace hard coded con_id string with fch_data->name. We have clk
consumers looking up with different clock names, hence use dynamic
con_id string during clk lookup registration. fch_data->name will
be initialized in acpi driver based on fmw property value.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-5-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a new device property to fetch clk-name from firmware.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-4-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Initially "is-rv" device property is added for 48MHz fixed clock
support on Raven or RV architecture. It's unused now as we moved
to pci device_id based selection to extend such support on other
architectures. This change removed unused code from acpi driver.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-3-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
FCH controller clock configuration slightly differs across AMD's
SOC architectures. Newer family of SOC only support a 48MHz fix
clock while stoney SOC family has a clk_mux to choose 48MHz and
25 MHz clk. At present fixed clk support is only enabled for RV
architecture using "is-rv" device property initialized from boot
loader. This limit 48MHz fixed clock gate support to RV platform
unless we add similar device property in boot loader for other
architectures.
Add pci_device_id table with Stoney platform id and replace "is-rv"
device property check with pci id match to add clk mux support with
25MHz and 48MHz clk support based on clk mux selection. This enable
48Mhz fixed fch clock support by default on all newer SOC's except
stoney. Also replace RV with FIXED as a generic naming conventions
across all platforms and changed module description.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-2-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Ingenic JZ4760 and JZ4770 both have an extra DMA core named BDMA
dedicated to the NAND and BCH controller, but which can also do
memory-to-memory transfers. The JZ4760 additionally has a DMA core named
MDMA dedicated to memory-to-memory transfers. The programming manual for
the JZ4770 does have a bit for a MDMA clock, but does not seem to have
the hardware wired in.
Add the BDMA and MDMA clocks to the JZ4760 CGU code, and the BDMA clock
to the JZ4770 code, so that the BDMA and MDMA controllers can be used.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211220193319.114974-3-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Ingenic JZ4760 and JZ4770 both have an extra DMA core named BDMA
dedicated to the NAND and BCH controller, but which can also do
memory-to-memory transfers. The JZ4760 additionally has a DMA core named
MDMA dedicated to memory-to-memory transfers. The programming manual for
the JZ4770 does have a bit for a MDMA clock, but does not seem to have
the hardware wired in.
Add macros for the MDMA and BDMA clocks to the dt-bindings include
files, so that they can be used within Device Tree files.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211220193319.114974-2-paul@crapouillou.net
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bm1880_clk_unregister_pll & bm1880_clk_unregister_div both try to
free statically allocated variables, so remove those kfrees.
For example, if we take L703 kfree(div_hw):
- div_hw is a bm1880_div_hw_clock pointer
- in bm1880_clk_register_plls this is pointed to an element of arg1:
struct bm1880_div_hw_clock *clks
- in the probe, where bm1880_clk_register_plls is called arg1 is
bm1880_div_clks, defined on L371:
static struct bm1880_div_hw_clock bm1880_div_clks[]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 1ab4601da5 ("clk: Add common clock driver for BM1880 SoC")
Link: https://lore.kernel.org/r/20211223154244.1024062-1-conor.dooley@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Menglong Dong says:
====================
From: Menglong Dong <imagedong@tencent.com>
The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in
__inet_bind() is not handled properly. While the return value
is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and
exit:
err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk);
if (err) {
inet->inet_saddr = inet->inet_rcv_saddr = 0;
goto out_release_sock;
}
Let's take UDP for example and see what will happen. For UDP
socket, it will be added to 'udp_prot.h.udp_table->hash' and
'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port()
called success. If 'inet->inet_rcv_saddr' is specified here,
then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong
to (because inet_saddr is changed to 0), and UDP packet received
will not be passed to this sock. If 'inet->inet_rcv_saddr' is not
specified here, the sock will work fine, as it can receive packet
properly, which is wired, as the 'bind()' is already failed.
To undo the get_port() operation, introduce the 'put_port' field
for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP
proto, it is udp_lib_unhash(); For icmp proto, it is
ping_unhash().
Therefore, after sys_bind() fail caused by
BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which
means that it can try to be binded to another port.
The second patch use C99 initializers in test_sock.c
The third patch is the selftests for this modification.
Changes since v4:
- use C99 initializers in test_sock.c before adding the test case
Changes since v3:
- add the third patch which use C99 initializers in test_sock.c
Changes since v2:
- NULL check for sk->sk_prot->put_port
Changes since v1:
- introduce 'put_port' field for 'struct proto'
- add selftests for it
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With previous patch, kernel is able to 'put_port' after sys_bind()
fails. Add the test for that case: rebind another port after
sys_bind() fails. If the bind success, it means previous bind
operation is already undoed.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220106132022.3470772-4-imagedong@tencent.com
The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in
__inet_bind() is not handled properly. While the return value
is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and
exit:
err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk);
if (err) {
inet->inet_saddr = inet->inet_rcv_saddr = 0;
goto out_release_sock;
}
Let's take UDP for example and see what will happen. For UDP
socket, it will be added to 'udp_prot.h.udp_table->hash' and
'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port()
called success. If 'inet->inet_rcv_saddr' is specified here,
then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong
to (because inet_saddr is changed to 0), and UDP packet received
will not be passed to this sock. If 'inet->inet_rcv_saddr' is not
specified here, the sock will work fine, as it can receive packet
properly, which is wired, as the 'bind()' is already failed.
To undo the get_port() operation, introduce the 'put_port' field
for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP
proto, it is udp_lib_unhash(); For icmp proto, it is
ping_unhash().
Therefore, after sys_bind() fail caused by
BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which
means that it can try to be binded to another port.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220106132022.3470772-2-imagedong@tencent.com
This reverts commit 410bd754cd.
The reverted commit had added a retry mechanism to the command entry
index allocation. The previous patch ensures that there is a free
command entry index once the command work handler holds the command
semaphore. Thus the retry mechanism is not needed.
Fixes: 410bd754cd ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Avoid a race where command work handler may fail to allocate command
entry index, by holding the command semaphore down till command entry
index is being freed.
Fixes: 410bd754cd ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently during NIC profile disablement all VXLAN udp ports offloaded to the
HW are flushed and during its enablement the driver send notification to
the stack to inform the core that the entire UDP tunnel port state has been
lost, uplink representor doesn't have the same behavior which can cause
VXLAN udp ports offload to be in bad state while moving between modes while
VXLAN interface exist.
Fixed by aligning the uplink representor profile behavior to the NIC behavior.
Fixes: 84db661247 ("net/mlx5e: Move set vxlan nic info to profile init")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Even when SF devices are supported, the SF device table allocation
can still fail.
In such case mlx5_sf_dev_supported still reports true, but SF device
table is invalid. This can result in NULL table access.
Hence, fix it by adding NULL table check.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tunnel device follows RFC 6040, and during decapsulation inner
ip_ecn might change depending on inner and outer ip_ecn as follows:
+---------+----------------------------------------+
|Arriving | Arriving Outer Header |
| Inner +---------+---------+---------+----------+
| Header | Not-ECT | ECT(0) | ECT(1) | CE |
+---------+---------+---------+---------+----------+
| Not-ECT | Not-ECT | Not-ECT | Not-ECT | <drop> |
| ECT(0) | ECT(0) | ECT(0) | ECT(1) | CE* |
| ECT(1) | ECT(1) | ECT(1) | ECT(1)* | CE* |
| CE | CE | CE | CE | CE |
+---------+---------+---------+---------+----------+
Cells marked above are changed from original inner packet ip_ecn value.
Tc then matches on the modified inner ip_ecn, but hw offload which
matches the inner ip_ecn value before decap, will fail.
Fix that by mapping all the cases of outer and inner ip_ecn matching,
and only supporting cases where we know inner wouldn't be changed by
decap, or in the outer ip_ecn=CE case, inner ip_ecn didn't matter.
Fixes: bcef735c59 ("net/mlx5e: Offload TC matching on tos/ttl for ip tunnels")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This reverts commit 54e1217b90.
Although the NIC doesn't support offload of outer header CSUM, using
gso_partial_features allows offloading the tunnel's segmentation. The
driver relies on the stack CSUM calculation of the outer header. For
this, NETIF_F_GSO_GRE_CSUM must be a member of the device's features.
Fixes: 54e1217b90 ("net/mlx5e: Block offload of outer header csum for GRE tunnel")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This reverts commit 6d6727dddc.
Although the NIC doesn't support offload of outer header CSUM, using
gso_partial_features allows offloading the tunnel's segmentation. The
driver relies on the stack CSUM calculation of the outer header. For
this, NETIF_F_GSO_UDP_TUNNEL_CSUM must be a member of the device's
features.
Fixes: 6d6727dddc ("net/mlx5e: Block offload of outer header csum for UDP tunnels")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Routes with nexthop objects is currently not supported by multipath offload
and any attempts to use it is blocked, however this also block adding SW
routes with nexthop.
Resolve this by returning NOTIFY_DONE instead of an error which will allow such
a route to be created in SW but not offloaded.
This fix also solve an issue which block adding such routes on different devices
due to missing check if the route FIB device is one of multipath devices.
Fixes: 6a87afc072 ("mlx5: Fail attempts to use routes with nexthop objects")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Driver initiates DMA sync, hence it may skip CPU sync. Add
DMA_ATTR_SKIP_CPU_SYNC as input attribute both to dma_map_page and
dma_unmap_page to avoid redundant sync with the CPU.
When forcing the device to work with SWIOTLB, the extra sync might cause
data corruption. The driver unmaps the whole page while the hardware
used just a part of the bounce buffer. So syncing overrides the entire
page with bounce buffer that only partially contains real data.
Fixes: bc77b240b3 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Fixes: db05815b36 ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This patch fixes the following build error for source file
drivers/scsi/pcmcia/sym53c500_cs.c:
In file included from ./include/linux/bug.h:5,
from ./include/linux/cpumask.h:14,
from ./include/linux/mm_types_task.h:14,
from ./include/linux/mm_types.h:5,
from ./include/linux/buildid.h:5,
from ./include/linux/module.h:14,
from drivers/scsi/pcmcia/sym53c500_cs.c:42:
drivers/scsi/pcmcia/sym53c500_cs.c: In function ‘SYM53C500_intr’:
./arch/parisc/include/asm/bug.h:28:2: error: expected expression before ‘do’
28 | do { \
| ^~
./arch/parisc/include/asm/io.h:276:20: note: in expansion of macro ‘BUG’
276 | #define outb(x, y) BUG()
| ^~~
drivers/scsi/pcmcia/sym53c500_cs.c:124:19: note: in expansion of macro ‘outb’
124 | #define REG0(x) (outb(C4_IMG, (x) + CONFIG4))
| ^~~~
drivers/scsi/pcmcia/sym53c500_cs.c:362:2: note: in expansion of macro ‘REG0’
362 | REG0(port_base);
| ^~~~
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Helge Deller <deller@gmx.de>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the parisc pdc_stable sysfs code to use default_groups
field which has been the preferred way since aa30f47cf6 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Add a simplistic keyboard driver for usage of PDC I/O functions
with kgdb. This driver makes it possible to use KGDB with QEMU.
Signed-off-by: Helge Deller <deller@gmx.de>
The definitions for pdc_toc_pim_11 and pdc_toc_pim_20 are wrong since they
include an entry for a hversion field which doesn't exist in the specification.
Fix this and clean up some whitespaces so that the whole file will be in
sync with it's copy in the SeaBIOS-hppa sources.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.16
This patch adds two new LWS routines - lws_atomic_xchg and lws_atomic_store.
These are simpler than the CAS routines. Currently, we use the CAS
routines for atomic stores. This is inefficient since it requires
both winning the spinlock and a successful CAS operation.
Change has been tested on c8000 and rp3440.
In v2, I moved the code to disble/enable page faults inside the spinlocks.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
The parisc architecture lacks general hardware support for compare and swap.
Particularly for userspace, it is difficult to implement software atomic
support. Page faults in critical regions can cause processes to sleep and
block the forward progress of other processes. Thus, it is essential that
page faults be disabled in critical regions. For performance reasons, we
also need to disable external interrupts in critical regions.
In order to do this, we need a mechanism to trigger COW breaks outside the
critical region. Fortunately, parisc has the "stbys,e" instruction. When
the leftmost byte of a word is addressed, this instruction triggers all
the exceptions of a normal store but it does not write to memory. Thus,
we can use it to trigger COW breaks outside the critical region without
modifying the data that is to be updated atomically.
COW breaks occur randomly. So even if we have priviously executed a "stbys,e"
instruction, we still need to disable pagefaults around the critical region.
If a fault occurs in the critical region, we return -EAGAIN. I had to add
a wrapper around _arch_futex_atomic_op_inuser() as I found in testing that
returning -EAGAIN caused problems for some processes even though it is
listed as a possible return value.
The patch implements the above. The code no longer attempts to sleep with
interrupts disabled and I haven't seen any stalls with the change.
I have attempted to merge common code and streamline the fast path. In the
futex code, we only compute the spinlock address once.
I eliminated some debug code in the original CAS routine that just made the
flow more complicated.
I don't clip the arguments when called from wide mode. As a result, the LWS
routines should work when called from 64-bit processes.
I defined TASK_PAGEFAULT_DISABLED offset for use in the lws_pagefault_disable
and lws_pagefault_enable macros.
Since we now disable interrupts on the gateway page where necessary, it
might be possible to allow processes to be scheduled when they are on the
gateway page.
Change has been tested on c8000 and rp3440. It improves glibc build and test
time by about 10%.
In v2, I removed the lws_atomic_xchg and and lws_atomic_store calls. I
also removed the bug fixes that were not directly related to this patch.
In v3, I removed the code to force interruptions from
arch_futex_atomic_op_inuser(). It is always called with page faults
disabled, so this code had no effect.
In v4, I fixed a typo in depi_safe line.
In v5, I moved the code to disable/enable page faults inside the spinlocks.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
In debugging kernel panics, I believe it is useful to know what type
of page fault caused the termination. "Bad Address" is too vague.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
It is dangerous to call faulthandler_disabled() when user_mode(regs)
is true. The task pagefault_disabled counter is racy and it is not
updated atomically on parisc. As a result, calling faulthandler_disabled()
may cause erroneous termination.
We now handle execption fixups and termination when user_mode(regs) is
false in handle_interruption(). Thus, we can just remove the
faulthandler_disabled() check from do_page_fault().
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Use register r29 instead of register r8 to signal faults when accessing
user memory. In case of faults, the fixup routine will store -EFAULT in
this register.
This change saves up to 752 bytes on a 32bit kernel, partly because the
compiler doesn't need to save and restore the old r8 value on the stack.
bloat-o-meter results for usage with r29 register:
add/remove: 0/0 grow/shrink: 23/86 up/down: 228/-980 (-752)
bloat-o-meter results for usage with r28 register:
add/remove: 0/0 grow/shrink: 28/83 up/down: 296/-956 (-660)
Signed-off-by: Helge Deller <deller@gmx.de>
In handle_interruption(), we call faulthandler_disabled() to check whether the
fault handler is not disabled. If the fault handler is disabled, we immediately
call do_page_fault(). It then calls faulthandler_disabled(). If disabled,
do_page_fault() attempts to fixup the exception by jumping to no_context:
no_context:
if (!user_mode(regs) && fixup_exception(regs)) {
return;
}
parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);
Apart from the error messages, the two blocks of code perform the same
function.
We can avoid two calls to faulthandler_disabled() by a simple revision
to the code in handle_interruption().
Note: I didn't try to fix the formatting of this code block.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
While working on the rewrite to the light-weight syscall and futex code, I
experimented with using a hash index based on the user physical address of
atomic variable. This exposed two problems with the lpa and lpa_user defines.
Because of the copy instruction, the pa argument needs to be an early clobber
argument. This prevents gcc from allocating the va and pa arguments to the same
register.
Secondly, the lpa instruction can cause a page fault so we need to catch
exceptions.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Fixes: 116d753308 ("parisc: Use lpa instruction to load physical addresses in driver code")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.2+
The depi instruction is similar to the extru instruction on 64-bit machines.
It leaves the most-significant 32 bits of the target register in an undefined
state. On 64-bit machines, the macro uses depdi to perform safe deposits in
the least-significant 32 bits.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix the following build warning:
Documentation/networking/devlink/mlx5.rst:13: WARNING: Error parsing content block for the "list-table" directive:
+uniform two-level bullet list expected, but row 2 does not contain the same number of items as row 1 (2 vs 3).
...
Add the missing item in the first row.
Fixes: 0844fa5f7b ("net/mlx5: Let user configure io_eq_size param")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The rep legacy RQ completion handling was missing the appropriate
handling of error CQEs (dump the CQE and queue a recover work), fix it
by calling trigger_report() when needed.
Since all CQE handling flows do the exact same error CQE handling,
extract it to a common helper function.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove redundant and trivial error logging when trying to
offload mirred device with unsupported devices.
Using OVS could hit those a lot and the errors are still
logged in extack.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
