Add Raptor Lake PCI ID for processor thermal device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add Raptor Lake ACPI IDs for DPTF devices.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add Raptor Lake ACPI IDs for DPTF devices.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ret_val local variable in cpc_read() is not necessary, so
eliminate it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Huang Rui <ray.huang@amd.com>
The code as currently implemented does not work on big endian systems,
so fix it up.
Fixes: a2c8f92bea ("ACPI: CPPC: Implement support for SystemIO registers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/linux-acpi/20220111092928.GA24968@kili/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Eliminate the follow smatch warning:
fs/cifs/sess.c:1581 sess_auth_rawntlmssp_authenticate() warn:
inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
One of my previous fixes:
cifs: send workstation name during ntlmssp session setup
...changed the prototype of build_ntlmssp_negotiate_blob
from being allocated by the caller to being allocated within
the function. The caller needs to free this object too.
While SMB2 version of the caller did it, I forgot to free
for the SMB1 version. Fixing that here.
Fixes: 49bd49f983 ("cifs: send workstation name during ntlmssp session setup")
Cc: stable@vger.kernel.org # 5.16
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The new module parameter to control PMU virtualization should apply
to Intel as well as AMD, for situations where userspace is not trusted.
If the module parameter allows PMU virtualization, there could be a
new KVM_CAP or guest CPUID bits whereby userspace can enable/disable
PMU virtualization on a per-VM basis.
If the module parameter does not allow PMU virtualization, there
should be no userspace override, since we have no precedent for
authorizing that kind of override. If it's false, other counter-based
profiling features (such as LBR including the associated CPUID bits
if any) will not be exposed.
Change its name from "pmu" to "enable_pmu" as we have temporary
variables with the same name in our code like "struct kvm_pmu *pmu".
Fixes: b1d66dad65 ("KVM: x86/svm: Add module param to control PMU virtualization")
Suggested-by : Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220111073823.21885-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM forbids KVM_SET_CPUID2 after KVM_RUN was performed on a vCPU unless
the supplied CPUID data is equal to what was previously set. Test this.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to reusing the existing 'get_cpuid_test' for testing
"KVM_SET_CPUID{,2} after KVM_RUN" rename it to 'cpuid_test' to avoid
the confusion.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit feb627e8d6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
forbade changing CPUID altogether but unfortunately this is not fully
compatible with existing VMMs. In particular, QEMU reuses vCPU fds for
CPU hotplug after unplug and it calls KVM_SET_CPUID2. Instead of full ban,
check whether the supplied CPUID data is equal to what was previously set.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Fixes: feb627e8d6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-3-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
[Do not call kvm_find_cpuid_entry repeatedly. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge support for the Platform Firmware Runtime Update and Telemetry
interface based on ACPI.
The interface provided here allows updating certain pieces of the
platform firmware without restarting the system and collecting
platform firmware telemetry data.
This also includes a utility for accesing the new interface from user
space.
* acpi-pfrut:
ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
ACPI: pfr_update: Fix return value check in pfru_write()
ACPI: tools: Introduce utility for firmware updates/telemetry
ACPI: Introduce Platform Firmware Runtime Telemetry driver
ACPI: Introduce Platform Firmware Runtime Update device driver
efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
kvm_update_cpuid_runtime() mangles CPUID data coming from userspace
VMM after updating 'vcpu->arch.cpuid_entries', this makes it
impossible to compare an update with what was previously
supplied. Introduce __kvm_update_cpuid_runtime() version which can be
used to tweak the input before it goes to 'vcpu->arch.cpuid_entries'
so the upcoming update check can compare tweaked data.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to CPUID 0x0A.EBX bit vector, the event [7] should be the
unrealized event "Topdown Slots" instead of the *kernel* generalized
common hardware event "REF_CPU_CYCLES", so we need to skip the cpuid
unavaliblity check in the intel_pmc_perf_hw_id() for the last
REF_CPU_CYCLES event and update the confusing comment.
If the event is marked as unavailable in the Intel guest CPUID
0AH.EBX leaf, we need to avoid any perf_event creation, whether
it's a gp or fixed counter. To distinguish whether it is a rejected
event or an event that needs to be programmed with PERF_TYPE_RAW type,
a new special returned value of "PERF_COUNT_HW_MAX + 1" is introduced.
Fixes: 62079d8a43 ("KVM: PMU: add proper support for fixed counter 2")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220105051509.69437-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we've made these ioctls defunct, move them from xfs_fs.h to
xfs_ioctl.c, which effectively removes them from the publicly supported
ioctl interfaces for XFS.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
According to the glibc compat header for Irix 4, these ioctls originated
in April 1991 as a (somewhat clunky) way to preallocate space at the end
of a file on an EFS filesystem. XFS, which was released in Irix 5.3 in
December 1993, picked up these ioctls to maintain compatibility and they
were ported to Linux in the early 2000s.
Recently it was pointed out to me they still lurk in the kernel, even
though the Linux fallocate syscall supplanted the functionality a long
time ago. fstests doesn't seem to include any real functional or stress
tests for these ioctls, which means that the code quality is ... very
questionable. Most notably, it was a stale disk block exposure vector
for 21 years and nobody noticed or complained. As mature programmers
say, "If you're not testing it, it's broken."
Given all that, let's withdraw these ioctls from the XFS userspace API.
Normally we'd set a long deprecation process, but I estimate that there
aren't any real users, so let's trigger a warning in dmesg and return
-ENOTTY.
See: CVE-2021-4155
Augments: 983d8e60f5 ("xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Remove the definitions for these ioctls, since the functionality (and,
weirdly, the 32-bit compat ioctl definitions) were removed from the
kernel in November 2019.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Merge additional ACPI-related updates for 5.17-rc1:
- Ignore E820 reservations covering PCI host bridge windows on
sufficiently recent x86 systems to avoid issues with allocating
PCI BARs on systems where the E820 reservations cover the entire
PCI host bridge memory window returned by the _CRS object in the
system's ACPI tables (Hans de Goede).
- Add more sanity checking to ACPI SPCR tables parsing (Mark
Langsdorf).
- Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).
- Drop unnecessary "static" from the ACPI PCC address space handling
driver added recently (kernel test robot).
* acpi-x86:
x86/PCI: Ignore E820 reservations for bridge windows on newer systems
* acpi-tables:
ACPI: SPCR: check if table->serial_port.access_width is too wide
* acpi-soc:
ACPI: APD: Check for NULL pointer after calling devm_ioremap()
* acpi-pcc:
ACPI: PCC: pcc_ctx can be static
Commit 7cfa9c92d0 ("net: sfp: avoid power switch on address-change
modules") unintetionally changed the semantics for high power modules
without the digital diagnostics monitoring. We repeatedly attempt to
read the power status from the non-existing 0xa2 address in a futile
hope this failure is temporary:
[ 8.856051] sfp sfp-eth3: module NTT 0000000000000000 rev 0000 sn 0000000000000000 dc 160408
[ 8.865843] mvpp2 f4000000.ethernet eth3: switched to inband/1000base-x link mode
[ 8.873469] sfp sfp-eth3: Failed to read EEPROM: -5
[ 8.983251] sfp sfp-eth3: Failed to read EEPROM: -5
[ 9.103250] sfp sfp-eth3: Failed to read EEPROM: -5
We previosuly assumed such modules were powered up in the correct mode,
continuing without further configuration as long as the required power
class was supported by the host.
Restore this behaviour, while preserving the intent of subsequent
patches to avoid the "Address Change Sequence not supported" warning
if we are not going to be accessing the DDM address.
Fixes: 7cfa9c92d0 ("net: sfp: avoid power switch on address-change modules")
Reported-by: 照山周一郎 <teruyama@springboard-inc.jp>
Tested-by: 照山周一郎 <teruyama@springboard-inc.jp>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
If brd_alloc() from brd_probe() is called before brd_alloc() from
brd_init() is called, module loading will fail with -EEXIST error.
To close this race, call __register_blkdev() just before leaving
brd_init().
Then, we can remove brd_devices_mutex mutex, for brd_device list
will no longer be accessed concurrently.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/6b074af7-c165-4fab-b7da-8270a4f6f6cd@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 4195926aed ("gpio: Add support for IDT 79RC3243x GPIO controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 76c47d1449 ("gpio: mpc8xxx: Add ACPI support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Sven Schnelle will help reviewing s390 architecture code.
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Previously, we've used magic values to specify the OAC
(operand-access control) for mvcos.
Instead we introduce a bit field for it.
When using a bit field, we cannot use an immediate value with K
constraint anymore, since GCC older than 10 doesn't recognize
the bit field union as a compile time constant.
To make things work with older compilers,
load the OAC value through a register.
Bloat-o-meter reports a slight increase in kernel size with this change:
Total: Before=15692135, After=15693015, chg +0.01%
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Co-developed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220111100003.743116-1-scgl@linux.ibm.com
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Adds support for the CPU Measurement Sampling Facility limit sampling
bit in the sampling device driver.
Limited samples have no valueable information are not collected.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Adds support for the CPU Measurement Counter Facility second version
number 7.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Gal Pressman says:
====================
net: Couple of skb memory leak fixes
As discussed in:
https://lore.kernel.org/netdev/20220102081253.9123-1-gal@nvidia.com/
These are the two followup suggestions from Eric and Jakub.
Patch #1 adds a sk_defer_free_flush() call to the kTLS splice_read
handler.
Patch #2 verifies the defer list is empty on socket destroy, and calls a
defer free flush as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The cited Fixes patch moved to a deferred skb approach where the skbs
are not freed immediately under the socket lock. Add a WARN_ON_ONCE()
to verify the deferred list is empty on socket destroy, and empty it to
prevent potential memory leaks.
Fixes: f35f821935 ("tcp: defer skb freeing after socket lock is released")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is a followup to
commit ffef737fd0 ("net/tls: Fix skb memory leak when running kTLS traffic")
Which was missing another sk_defer_free_flush() call in
tls_sw_splice_read().
Fixes: f35f821935 ("tcp: defer skb freeing after socket lock is released")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the blamed commit, the call to the function
switchdev_bridge_port_offload was passing the wrong argument for
atomic_nb. It was ocelot_netdevice_nb instead of ocelot_swtchdev_nb.
This patch fixes this issue.
Fixes: 4e51bf44a0 ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of only servicing the lowest pending interrupt line, make sure
all pending SoC interrupts are serviced before exiting the chained
handler. This adds a small overhead if only one interrupt is pending,
but should prevent rapid re-triggering of the handler.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5082ad3cb8b4eedf55075561b93eff6570299fe1.1641739718.git.sander@svanheule.net
There is an offset between routing values (1..6) and the connected MIPS
CPU interrupts (2..7), but no distinction was made between these two
values.
This issue was previously hidden during testing, because an interrupt
mapping was used where for each required interrupt another (unused)
routing was configured, with an offset of +1.
Offset the CPU IRQ numbers by -1 to retrieve the correct routing value.
Fixes: 9f3a0f34b8 ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/177b920aa8d8610615692d0e657e509f363c85ca.1641739718.git.sander@svanheule.net
The driver assigned the irqchip and irq handler to the hardware irq,
instead of the virq. This is incorrect, and only worked because these
irq numbers happened to be the same on the devices used for testing the
original driver.
Fixes: 9f3a0f34b8 ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/4b4936606480265db47df152f00bc2ed46340599.1641739718.git.sander@svanheule.net
TC voltage swing programming sequence was updated with a new step.
BSpec: 54956
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113174826.50272-1-jose.souza@intel.com
(cherry picked from commit 5ff59dddac)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Some weird devices set the codec SSID vendor ID 0, and
snd_pci_quirk_lookup_id() loop aborts at the point although it should
still try matching with the SSID device ID. This resulted in a
missing quirk for some old Macs.
Fix the loop termination condition to check both subvendor and
subdevice.
Fixes: 73355ddd87 ("ALSA: hda: Code refactoring snd_hda_pick_fixup()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215495
Link: https://lore.kernel.org/r/20220116082838.19382-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=Kauh
-----END PGP SIGNATURE-----
Merge tag '5.17-rc-part1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- multichannel patches mostly related to improving reconnect behavior
- minor cleanup patches
* tag '5.17-rc-part1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix FILE_BOTH_DIRECTORY_INFO definition
cifs: move superblock magic defitions to magic.h
cifs: Fix smb311_update_preauth_hash() kernel-doc comment
cifs: avoid race during socket reconnect between send and recv
cifs: maintain a state machine for tcp/smb/tcon sessions
cifs: fix hang on cifs_get_next_mid()
cifs: take cifs_tcp_ses_lock for status checks
cifs: reconnect only the connection and not smb session where possible
cifs: add WARN_ON for when chan_count goes below minimum
cifs: adjust DebugData to use chans_need_reconnect for conn status
cifs: use the chans_need_reconnect bitmap for reconnect status
cifs: track individual channel status using chans_need_reconnect
cifs: remove redundant assignment to pointer p
Prior to Linux v5.4 devtmpfs used mount_single() which treats the given
mount options as "remount" options, so it updates the configuration of
the single super_block on each mount.
Since that was changed, the mount options used for devtmpfs are ignored.
This is a regression which affect systemd - which mounts devtmpfs with
"-o mode=755,size=4m,nr_inodes=1m".
This patch restores the "remount" effect by calling reconfigure_single()
Fixes: d401727ea0 ("devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add me as maintainer for the framebuffer code.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYeRunAAKCRD3ErUQojoP
XwfjAQCby++H4rdvUwTrE1ZkIOUVAjDhmLvJ1Agbn+F8XLAlsgD9EAJwvTUyH603
T4Gu4khLMZ61VUXTbPV+kfuSOVUakwo=
=fyqU
-----END PGP SIGNATURE-----
Merge tag 'fbdev-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev maintainership update from Helge Deller:
"The fbdev layer is orphaned, but seems to need some care. So I'd like
to step up as new maintainer"
* tag 'fbdev-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
MAINTAINERS: Add Helge as fbdev maintainer
Pull input updates from Dmitry Torokhov:
"Updates to Goodix touchscreen driver (addition of pen support) and
Silead touchscreen driver (also addition of pen support and parsing of
embedded firmware to determine screen size), along with assorted fixes
for other drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix a typo in a comment
Input: zinitix - add compatible for bt532
Input: zinitix - handle proper supply names
dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend
Input: axp20x-pek - revert "always register interrupt handlers" change
Input: gpio-keys - avoid clearing twice some memory
Input: byd - fix typo in a comment
Input: ucb1400_ts - remove redundant variable penup
Input: ti_am335x_tsc - lower the X and Y sampling time
Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2
Input: ti_am335x_tsc - set ADCREFM for X configuration
Input: silead - add pen support
Input: silead - add support for EFI-embedded fw using different min/max coordinates
Input: goodix - 2 small fixes for pen support
Input: goodix - improve gpiod_get() error logging
Input: goodix - add pen support
Input: ff-core - correct magnitude setting for rumble compatibility
Input: palmas-pwrbutton - make a couple of arrays static const
Input: wacom_i2c - clean up the query device fields
Input: palmas-pwrbutton - use bitfield helpers
Drivers:
- svc: runtime pm suport
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmHkiAQACgkQY6TcMGxw
OjIm0g//XDVYRFcY00j5sWiXNhwOt2kWuz4N6ING8t/GaPkxiOE8MxbB2xhcsbQS
od3Lt9vRQQVjGY0OgCOBsC0dJYuFDmg3YglI6V6EnxrdmgjSdkVsKbh0kvYY0tR7
6O72CaUxxG4TQ1/ASK95lXlCPwF6QhUZCsWKj4f9FI/SgqwgndkHKgXXOVmO806Y
NYnm21LZOBHA9LJ1TlUSp9H1hWg2mNY4n4liuFqsrzr9YaKhGn5IdXD6kXlgFxcp
xFv0GKu0Gc6UMOOqzhDsUPgRz4T2t30pF2P48jKVNRoHnQouixWgpJBbsDutagwV
oYsxGLaxHsBaAYlSpMiyyayDma/kwdSP6JRiaZg27O88ZyELbx/wNM5qNbbLyHMw
MUbmWrjRgT75HRfYijobvRqZWER3KACl7h7kEYiBPyyXKvsSF1qPozguBR/GunZ5
CmOogaO4GqbpZy4s9Ya+qXrpDvQqjy2z1trwpf0aH+0NMXFI5t4jusRuWt5/YctK
v9Wv9bxCv7Wk0VgR3RP5uc67M+g0SeoRvu3qAURZVINihaPD/p7BVdIRyS17flim
Q/mBU1p4t3qW4iUHwtwCCqCHLSC1axBNIQ/CXCptnCoZzmNf2elFgERbMQ9TpxyX
WwEqlzPpiOF8KPMjI+q2uRDmCMmjezJfBPFU2jnmB4IJ0qBtuCs=
=6Xr2
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Mostly non urgent fixes and a few improvements (including runtime pm
suport) to the Silvaco driver"
* tag 'i3c/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw: check return of dw_i3c_master_get_free_pos()
i3c: master: mipi-i3c-hci: correct the config reference for endianness
i3c: master: svc: enable the interrupt in the enable ibi function
i3c: master: svc: add the missing module device table
i3c: master: svc: add runtime pm support
i3c: master: svc: set ODSTOP to let I2C device see the STOP signal
i3c: master: svc: add support for slave to stop returning data
i3c: master: svc: separate err, fifo and disable interrupt of reset function
i3c: master: svc: fix atomic issue
i3c: master: svc: move module reset behind clk enable
i3c/master/mipi-i3c-hci: Fix a potentially infinite loop in 'hci_dat_v1_get_index()'
i3c: fix incorrect address slot lookup on 64-bit
i3c/master/mipi-i3c-hci: Prefer kcalloc over open coded arithmetic
i3c/master/mipi-i3c-hci: Prefer struct_size over open coded arithmetic
for Linux v5.17
-----BEGIN PGP SIGNATURE-----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=TMHM
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.17' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"New AMD PCI ID for NTB, and a number of bug fixes for ntb_hw_switchtec
for Linux v5.17"
* tag 'ntb-5.17' of git://github.com/jonmason/ntb:
ntb_hw_switchtec: Fix a minor issue in config_req_id_table()
ntb_hw_switchtec: Remove code for disabling ID protection
ntb_hw_switchtec: Update the way of getting VEP instance ID
ntb_hw_switchtec: AND with the part_map for a valid tpart_vec
ntb_hw_switchtec: Fix bug with more than 32 partitions
ntb_hw_switchtec: Fix pff ioread to read into mmio_part_cfg_all
ntb_hw_switchtec: fix the spelling of "its"
NTB/msi: Fix ntbm_msi_request_threaded_irq() kernel-doc comment
ntb_hw_amd: Add NTB PCI ID for new gen CPU
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmHih/MACgkQ+iyteGJfRsqJBQCeN3KG3aVFcHwFM7EgNIRpqQCp
swMAoK0LtVw4gTrQX8YxJ+Ml/ZVz3guA
=NVYY
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- New device support:
- Watchdog Timer driver for RZ/G2L
- Realtek Otto watchdog timer
- Apple SoC watchdog driver
- Fintek F81966
- Remove BCM63XX_WDT after support for this SoC was added to
BCM7038_WDT
- Improvements of the BCM7038_WDT and s3c2410_wdt code
- Several other fixes and improvements
* tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: msc313e: Check if the WDT was running at boot
watchdog: Add Apple SoC watchdog driver
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
watchdog: s3c2410: Fix getting the optional clock
watchdog: s3c2410: Use platform_get_irq() to get the interrupt
dt-bindings: watchdog: atmel: Add missing 'interrupts' property
watchdog: mtk_wdt: use platform_get_irq_optional
watchdog: Add Watchdog Timer driver for RZ/G2L
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: da9063: Add hard dependency on I2C
watchdog: Add Realtek Otto watchdog timer
dt-bindings: watchdog: Realtek Otto WDT binding
watchdog: s3c2410: Add Exynos850 support
watchdog: da9063: use atomic safe i2c transfer in reset handler
watchdog: davinci: Use div64_ul instead of do_div
watchdog: Remove BCM63XX_WDT
MIPS: BCM63XX: Provide platform data to watchdog device
watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
watchdog: Allow building BCM7038_WDT for BCM63XX
watchdog: bcm7038_wdt: Support platform data configuration
...
Pull coccinelle updates from Julia Lawall:
"Remove some semantic patches and remove a maintainer.
Qing Wang <wangqing@vivo.com> reported that fen.cocci mostly finds
false positives, so it is dropped.
scripts/coccinelle/iterators/for_each_child.cocci also subsumes it, in
a more correct way.
Matthew Wilcox <willy@infradead.org> reported that bugon.cocci mostly
gives false positives. It is an old script and was designed to be
inaccurate to maximally cover problems, but most of what it is useful
for has been done already.
Gilles Muller passed away and is thus dropped from the maintainers
list"
* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
drop fen.cocci
scripts/coccinelle: drop bugon.cocci
MAINTAINERS: remove Gilles Muller
Pull module updates from Luis Chamberlain:
"The biggest change here is in-kernel support for module decompression.
This change is being made to help support LSMs like LoadPin as
otherwise it loses link between the source of kernel module on the
disk and binary blob that is being loaded into the kernel.
kmod decompression is still done by userspace even with this is done,
both because there are no measurable gains in not doing so and as it
adds a secondary extra check for validating the module before loading
it into the kernel.
The rest of the changes are minor, the only other change worth
mentionin there is Jessica Yu is now bowing out of maintenance of
modules as she's taking a break from work.
While there were other changes posted for modules, those have not yet
received much review of testing so I'm not yet comfortable in merging
any of those changes yet."
* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: fix signature check failures when using in-kernel decompression
kernel: Fix spelling mistake "compresser" -> "compressor"
MAINTAINERS: add mailing lists for kmod and modules
module.h: allow #define strings to work with MODULE_IMPORT_NS
module: add in-kernel support for decompressing
MAINTAINERS: Remove myself as modules maintainer
module: Remove outdated comment
Commit 2b3d047870 ("unicode: Add utf8-data module") changed the
generated utf8data file from 'utf8data.h' to 'utf8data.c', but didn't
change the comments or the .gitignore to match.
The comments should be updated too, but at least they don't cause any
visible breakage. But the gitignore file needs changing to avoid git
complaining about untracked files.
Fixes: 2b3d047870 ("unicode: Add utf8-data module")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
