Add APIs for appending new BTF types at the end of BTF object.
Each BTF kind has either one API of the form btf__add_<kind>(). For types
that have variable amount of additional items (struct/union, enum, func_proto,
datasec), additional API is provided to emit each such item. E.g., for
emitting a struct, one would use the following sequence of API calls:
btf__add_struct(...);
btf__add_field(...);
...
btf__add_field(...);
Each btf__add_field() will ensure that the last BTF type is of STRUCT or
UNION kind and will automatically increment that type's vlen field.
All the strings are provided as C strings (const char *), not a string offset.
This significantly improves usability of BTF writer APIs. All such strings
will be automatically appended to string section or existing string will be
re-used, if such string was already added previously.
Each API attempts to do all the reasonable validations, like enforcing
non-empty names for entities with required names, proper value bounds, various
bit offset restrictions, etc.
Type ID validation is minimal because it's possible to emit a type that refers
to type that will be emitted later, so libbpf has no way to enforce such
cases. User must be careful to properly emit all the necessary types and
specify type IDs that will be valid in the finally generated BTF.
Each of btf__add_<kind>() APIs return new type ID on success or negative
value on error. APIs like btf__add_field() that emit additional items
return zero on success and negative value on error.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200929020533.711288-2-andriin@fb.com
Add an ability to create an empty BTF object from scratch. This is going to be
used by pahole for BTF encoding. And also by selftest for convenient creation
of BTF objects.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-7-andriin@fb.com
Allow internal BTF representation to switch from default read-only mode, in
which raw BTF data is a single non-modifiable block of memory with BTF header,
types, and strings layed out sequentially and contiguously in memory, into
a writable representation with types and strings data split out into separate
memory regions, that can be dynamically expanded.
Such writable internal representation is transparent to users of libbpf APIs,
but allows to append new types and strings at the end of BTF, which is
a typical use case when generating BTF programmatically. All the basic
guarantees of BTF types and strings layout is preserved, i.e., user can get
`struct btf_type *` pointer and read it directly. Such btf_type pointers might
be invalidated if BTF is modified, so some care is required in such mixed
read/write scenarios.
Switch from read-only to writable configuration happens automatically the
first time when user attempts to modify BTF by either adding a new type or new
string. It is still possible to get raw BTF data, which is a single piece of
memory that can be persisted in ELF section or into a file as raw BTF. Such
raw data memory is also still owned by BTF and will be freed either when BTF
object is freed or if another modification to BTF happens, as any modification
invalidates BTF raw representation.
This patch adds the first two BTF manipulation APIs: btf__add_str(), which
allows to add arbitrary strings to BTF string section, and btf__find_str()
which allows to find existing string offset, but not add it if it's missing.
All the added strings are automatically deduplicated. This is achieved by
maintaining an additional string lookup index for all unique strings. Such
index is built when BTF is switched to modifiable mode. If at that time BTF
strings section contained duplicate strings, they are not de-duplicated. This
is done specifically to not modify the existing content of BTF (types, their
string offsets, etc), which can cause confusion and is especially important
property if there is struct btf_ext associated with struct btf. By following
this "imperfect deduplication" process, btf_ext is kept consitent and correct.
If deduplication of strings is necessary, it can be forced by doing BTF
deduplication, at which point all the strings will be eagerly deduplicated and
all string offsets both in struct btf and struct btf_ext will be updated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200926011357.2366158-6-andriin@fb.com
Add bpf_prog_test_run_opts() with support of new fields in bpf_attr.test,
namely, flags and cpu. Also extend _opts operations to support outputs via
opts.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200925205432.1777-3-songliubraving@fb.com
The patch adds a simple wrapper bpf_prog_bind_map around the syscall.
When the libbpf tries to load a program, it will probe the kernel for
the support of this syscall and unconditionally bind .rodata section
to the program.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Link: https://lore.kernel.org/bpf/20200915234543.3220146-4-sdf@google.com
BPF program title is ambigious and misleading term. It is ELF section name, so
let's just call it that and deprecate bpf_program__title() API in favor of
bpf_program__section_name().
Additionally, using bpf_object__find_program_by_title() is now inherently
dangerous and ambiguous, as multiple BPF program can have the same section
name. So deprecate this API as well and recommend to switch to non-ambiguous
bpf_object__find_program_by_name().
Internally, clean up usage and mis-usage of BPF program section name for
denoting BPF program name. Shorten the field name to prog->sec_name to be
consistent with all other prog->sec_* variables.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200903203542.15944-11-andriin@fb.com
Add support for shared umems between hardware queues and devices to
the AF_XDP part of libbpf. This so that zero-copy can be achieved in
applications that want to send and receive packets between HW queues
on one device or between different devices/netdevs.
In order to create sockets that share a umem between hardware queues
and devices, a new function has been added called
xsk_socket__create_shared(). It takes the same arguments as
xsk_socket_create() plus references to a fill ring and a completion
ring. So for every socket that share a umem, you need to have one more
set of fill and completion rings. This in order to maintain the
single-producer single-consumer semantics of the rings.
You can create all the sockets via the new xsk_socket__create_shared()
call, or create the first one with xsk_socket__create() and the rest
with xsk_socket__create_shared(). Both methods work.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-14-git-send-email-magnus.karlsson@intel.com
Add a set of APIs to perf_buffer manage to allow applications to integrate
perf buffer polling into existing epoll-based infrastructure. One example is
applications using libevent already and wanting to plug perf_buffer polling,
instead of relying on perf_buffer__poll() and waste an extra thread to do it.
But perf_buffer is still extremely useful to set up and consume perf buffer
rings even for such use cases.
So to accomodate such new use cases, add three new APIs:
- perf_buffer__buffer_cnt() returns number of per-CPU buffers maintained by
given instance of perf_buffer manager;
- perf_buffer__buffer_fd() returns FD of perf_event corresponding to
a specified per-CPU buffer; this FD is then polled independently;
- perf_buffer__consume_buffer() consumes data from single per-CPU buffer,
identified by its slot index.
To support a simpler, but less efficient, way to integrate perf_buffer into
external polling logic, also expose underlying epoll FD through
perf_buffer__epoll_fd() API. It will need to be followed by
perf_buffer__poll(), wasting extra syscall, or perf_buffer__consume(), wasting
CPU to iterate buffers with no data. But could be simpler and more convenient
for some cases.
These APIs allow for great flexiblity, but do not sacrifice general usability
of perf_buffer.
Also exercise and check new APIs in perf_buffer selftest.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20200821165927.849538-1-andriin@fb.com
With libbpf and BTF it is pretty common to have libbpf built for one
architecture, while BTF information was generated for a different architecture
(typically, but not always, BPF). In such case, the size of a pointer might
differ betweem architectures. libbpf previously was always making an
assumption that pointer size for BTF is the same as native architecture
pointer size, but that breaks for cases where libbpf is built as 32-bit
library, while BTF is for 64-bit architecture.
To solve this, add heuristic to determine pointer size by searching for `long`
or `unsigned long` integer type and using its size as a pointer size. Also,
allow to override the pointer size with a new API btf__set_pointer_size(), for
cases where application knows which pointer size should be used. User
application can check what libbpf "guessed" by looking at the result of
btf__pointer_size(). If it's not 0, then libbpf successfully determined a
pointer size, otherwise native arch pointer size will be used.
For cases where BTF is parsed from ELF file, use ELF's class (32-bit or
64-bit) to determine pointer size.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-5-andriin@fb.com
Add public APIs to parse BTF from raw data file (e.g.,
/sys/kernel/btf/vmlinux), as well as generic btf__parse(), which will try to
determine correct format, currently either raw or ELF.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200802013219.864880-2-andriin@fb.com
Sync UAPI header and add support for using bpf_link-based XDP attachment.
Make xdp/ prog type set expected attach type. Kernel didn't enforce
attach_type for XDP programs before, so there is no backwards compatiblity
issues there.
Also fix section_names selftest to recognize that xdp prog types now have
expected attach type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-8-andriin@fb.com
Make libbpf aware of the newly added program type, and assign it a
section name.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-13-jakub@cloudflare.com
Add setter for BTF FD to allow application more fine-grained control in more
advanced scenarios. Storing BTF FD inside `struct btf` provides little benefit
and probably would be better done differently (e.g., btf__load() could just
return FD on success), but we are stuck with this due to backwards
compatibility. The main problem is that it's impossible to load BTF and than
free user-space memory, but keep FD intact, because `struct btf` assumes
ownership of that FD upon successful load and will attempt to close it during
btf__free(). To allow callers (e.g., libbpf itself for BTF sanitization) to
have more control over this, add btf__set_fd() to allow to reset FD
arbitrarily, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-3-andriin@fb.com
Currently, bpf_object__load() (and by induction skeleton's load), will always
attempt to prepare, relocate, and load into kernel every single BPF program
found inside the BPF object file. This is often convenient and the right thing
to do and what users expect.
But there are plenty of cases (especially with BPF development constantly
picking up the pace), where BPF application is intended to work with old
kernels, with potentially reduced set of features. But on kernels supporting
extra features, it would like to take a full advantage of them, by employing
extra BPF program. This could be a choice of using fentry/fexit over
kprobe/kretprobe, if kernel is recent enough and is built with BTF. Or BPF
program might be providing optimized bpf_iter-based solution that user-space
might want to use, whenever available. And so on.
With libbpf and BPF CO-RE in particular, it's advantageous to not have to
maintain two separate BPF object files to achieve this. So to enable such use
cases, this patch adds ability to request not auto-loading chosen BPF
programs. In such case, libbpf won't attempt to perform relocations (which
might fail due to old kernel), won't try to resolve BTF types for
BTF-aware (tp_btf/fentry/fexit/etc) program types, because BTF might not be
present, and so on. Skeleton will also automatically skip auto-attachment step
for such not loaded BPF programs.
Overall, this feature allows to simplify development and deployment of
real-world BPF applications with complicated compatibility requirements.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200625232629.3444003-2-andriin@fb.com
Add a bunch of getter for various aspects of BPF map. Some of these attribute
(e.g., key_size, value_size, type, etc) are available right now in struct
bpf_map_def, but this patch adds getter allowing to fetch them individually.
bpf_map_def approach isn't very scalable, when ABI stability requirements are
taken into account. It's much easier to extend libbpf and add support for new
features, when each aspect of BPF map has separate getter/setter.
Getters follow the common naming convention of not explicitly having "get" in
its name: bpf_map__type() returns map type, bpf_map__key_size() returns
key_size. Setters, though, explicitly have set in their name:
bpf_map__set_type(), bpf_map__set_key_size().
This patch ensures we now have a getter and a setter for the following
map attributes:
- type;
- max_entries;
- map_flags;
- numa_node;
- key_size;
- value_size;
- ifindex.
bpf_map__resize() enforces unnecessary restriction of max_entries > 0. It is
unnecessary, because libbpf actually supports zero max_entries for some cases
(e.g., for PERF_EVENT_ARRAY map) and treats it specially during map creation
time. To allow setting max_entries=0, new bpf_map__set_max_entries() setter is
added. bpf_map__resize()'s behavior is preserved for backwards compatibility
reasons.
Map ifindex getter is added as well. There is a setter already, but no
corresponding getter. Fix this assymetry as well. bpf_map__set_ifindex()
itself is converted from void function into error-returning one, similar to
other setters. The only error returned right now is -EBUSY, if BPF map is
already loaded and has corresponding FD.
One lacking attribute with no ability to get/set or even specify it
declaratively is numa_node. This patch fixes this gap and both adds
programmatic getter/setter, as well as adds support for numa_node field in
BTF-defined map.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200621062112.3006313-1-andriin@fb.com
Add bpf_program__attach_nets(), which uses LINK_CREATE subcommand to create
an FD-based kernel bpf_link, for attach types tied to network namespace,
that is BPF_FLOW_DISSECTOR for the moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-7-jakub@cloudflare.com
Declaring and instantiating BPF ring buffer doesn't require any changes to
libbpf, as it's just another type of maps. So using existing BTF-defined maps
syntax with __uint(type, BPF_MAP_TYPE_RINGBUF) and __uint(max_elements,
<size-of-ring-buf>) is all that's necessary to create and use BPF ring buffer.
This patch adds BPF ring buffer consumer to libbpf. It is very similar to
perf_buffer implementation in terms of API, but also attempts to fix some
minor problems and inconveniences with existing perf_buffer API.
ring_buffer support both single ring buffer use case (with just using
ring_buffer__new()), as well as allows to add more ring buffers, each with its
own callback and context. This allows to efficiently poll and consume
multiple, potentially completely independent, ring buffers, using single
epoll instance.
The latter is actually a problem in practice for applications
that are using multiple sets of perf buffers. They have to create multiple
instances for struct perf_buffer and poll them independently or in a loop,
each approach having its own problems (e.g., inability to use a common poll
timeout). struct ring_buffer eliminates this problem by aggregating many
independent ring buffer instances under the single "ring buffer manager".
Second, perf_buffer's callback can't return error, so applications that need
to stop polling due to error in data or data signalling the end, have to use
extra mechanisms to signal that polling has to stop. ring_buffer's callback
can return error, which will be passed through back to user code and can be
acted upon appropariately.
Two APIs allow to consume ring buffer data:
- ring_buffer__poll(), which will wait for data availability notification
and will consume data only from reported ring buffer(s); this API allows
to efficiently use resources by reading data only when it becomes
available;
- ring_buffer__consume(), will attempt to read new records regardless of
data availablity notification sub-system. This API is useful for cases
when lowest latency is required, in expense of burning CPU resources.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-3-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This new API, perf_buffer__consume, can be used as follows:
- When you have a perf ring where wakeup_events is higher than 1,
and you have remaining data in the rings you would like to pull
out on exit (or maybe based on a timeout).
- For low latency cases where you burn a CPU that constantly polls
the queues.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159048487929.89441.7465713173442594608.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Two new libbpf APIs are added to support bpf_iter:
- bpf_program__attach_iter
Given a bpf program and additional parameters, which is
none now, returns a bpf_link.
- bpf_iter_create
syscall level API to create a bpf iterator.
The macro BPF_SEQ_PRINTF are also introduced. The format
looks like:
BPF_SEQ_PRINTF(seq, "task id %d\n", pid);
This macro can help bpf program writers with
nicer bpf_seq_printf syntax similar to the kernel one.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175917.2476936-1-yhs@fb.com
Add bpf_program__attach_cgroup(), which uses BPF_LINK_CREATE subcommand to
create an FD-based kernel bpf_link. Also add low-level bpf_link_create() API.
If expected_attach_type is not specified explicitly with
bpf_program__set_expected_attach_type(), libbpf will try to determine proper
attach type from BPF program's section definition.
Also add support for bpf_link's underlying BPF program replacement:
- unconditional through high-level bpf_link__update_program() API;
- cmpxchg-like with specifying expected current BPF program through
low-level bpf_link_update() API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-4-andriin@fb.com
Since BPF_PROG_TYPE_LSM uses the same attaching mechanism as
BPF_PROG_TYPE_TRACING, the common logic is refactored into a static
function bpf_program__attach_btf_id.
A new API call bpf_program__attach_lsm is still added to avoid userspace
conflicts if this ever changes in the future.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-7-kpsingh@chromium.org
For internal maps (most notably the maps backing global variables), libbpf
uses an internal mmaped area to store the data after opening the object.
This data is subsequently copied into the kernel map when the object is
loaded.
This adds a function to set a new value for that data, which can be used to
before it is loaded into the kernel. This is especially relevant for RODATA
maps, since those are frozen on load.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329132253.232541-1-toke@redhat.com
This adds a new function to set the XDP fd while specifying the FD of the
program to replace, using the newly added IFLA_XDP_EXPECTED_FD netlink
parameter. The new function uses the opts struct mechanism to be extendable
in the future.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158515700857.92963.7052131201257841700.stgit@toke.dk
With bpf_link abstraction supported by kernel explicitly, add
pinning/unpinning API for links. Also allow to create (open) bpf_link from BPF
FS file.
This API allows to have an "ephemeral" FD-based BPF links (like raw tracepoint
or fexit/freplace attachments) surviving user process exit, by pinning them in
a BPF FS, which is an important use case for long-running BPF programs.
As part of this, expose underlying FD for bpf_link. While legacy bpf_link's
might not have a FD associated with them (which will be expressed as
a bpf_link with fd=-1), kernel's abstraction is based around FD-based usage,
so match it closely. This, subsequently, allows to have a generic
pinning/unpinning API for generalized bpf_link. For some types of bpf_links
kernel might not support pinning, in which case bpf_link__pin() will return
error.
With FD being part of generic bpf_link, also get rid of bpf_link_fd in favor
of using vanialla bpf_link.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200303043159.323675-3-andriin@fb.com
Currently when you want to attach a trace program to a bpf program
the section name needs to match the tracepoint/function semantics.
However the addition of the bpf_program__set_attach_target() API
allows you to specify the tracepoint/function dynamically.
The call flow would look something like this:
xdp_fd = bpf_prog_get_fd_by_id(id);
trace_obj = bpf_object__open_file("func.o", NULL);
prog = bpf_object__find_program_by_title(trace_obj,
"fentry/myfunc");
bpf_program__set_expected_attach_type(prog, BPF_TRACE_FENTRY);
bpf_program__set_attach_target(prog, xdp_fd,
"xdpfilt_blk_all");
bpf_object__load(trace_obj)
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158220519486.127661.7964708960649051384.stgit@xdp-tutorial
Add minimal support for program extensions. bpf_object_open_opts() needs to be
called with attach_prog_fd = target_prog_fd and BPF program extension needs to
have in .c file section definition like SEC("freplace/func_to_be_replaced").
libbpf will search for "func_to_be_replaced" in the target_prog_fd's BTF and
will pass it in attach_btf_id to the kernel. This approach works for tests, but
more compex use case may need to request function name (and attach_btf_id that
kernel sees) to be more dynamic. Such API will be added in future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200121005348.2769920-3-ast@kernel.org
This patch exposes bpf_find_kernel_btf() as a LIBBPF_API.
It will be used in 'bpftool map dump' in a following patch
to dump a map with btf_vmlinux_value_type_id set.
bpf_find_kernel_btf() is renamed to libbpf_find_kernel_btf()
and moved to btf.c. As <linux/kernel.h> is included,
some of the max/min type casting needs to be fixed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200115230031.1102305-1-kafai@fb.com
Added four libbpf API functions to support map batch operations:
. int bpf_map_delete_batch( ... )
. int bpf_map_lookup_batch( ... )
. int bpf_map_lookup_and_delete_batch( ... )
. int bpf_map_update_batch( ... )
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-8-brianvv@google.com
This patch adds BPF STRUCT_OPS support to libbpf.
The only sec_name convention is SEC(".struct_ops") to identify the
struct_ops implemented in BPF,
e.g. To implement a tcp_congestion_ops:
SEC(".struct_ops")
struct tcp_congestion_ops dctcp = {
.init = (void *)dctcp_init, /* <-- a bpf_prog */
/* ... some more func prts ... */
.name = "bpf_dctcp",
};
Each struct_ops is defined as a global variable under SEC(".struct_ops")
as above. libbpf creates a map for each variable and the variable name
is the map's name. Multiple struct_ops is supported under
SEC(".struct_ops").
In the bpf_object__open phase, libbpf will look for the SEC(".struct_ops")
section and find out what is the btf-type the struct_ops is
implementing. Note that the btf-type here is referring to
a type in the bpf_prog.o's btf. A "struct bpf_map" is added
by bpf_object__add_map() as other maps do. It will then
collect (through SHT_REL) where are the bpf progs that the
func ptrs are referring to. No btf_vmlinux is needed in
the open phase.
In the bpf_object__load phase, the map-fields, which depend
on the btf_vmlinux, are initialized (in bpf_map__init_kern_struct_ops()).
It will also set the prog->type, prog->attach_btf_id, and
prog->expected_attach_type. Thus, the prog's properties do
not rely on its section name.
[ Currently, the bpf_prog's btf-type ==> btf_vmlinux's btf-type matching
process is as simple as: member-name match + btf-kind match + size match.
If these matching conditions fail, libbpf will reject.
The current targeting support is "struct tcp_congestion_ops" which
most of its members are function pointers.
The member ordering of the bpf_prog's btf-type can be different from
the btf_vmlinux's btf-type. ]
Then, all obj->maps are created as usual (in bpf_object__create_maps()).
Once the maps are created and prog's properties are all set,
the libbpf will proceed to load all the progs.
bpf_map__attach_struct_ops() is added to register a struct_ops
map to a kernel subsystem.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200109003514.3856730-1-kafai@fb.com
Introduce a new probe which checks whether kernel has large maximum
program size which was increased in the following commit:
c04c0d2b96 ("bpf: increase complexity limit and maximum program size")
Based on the similar check in Cilium[0], authored by Daniel Borkmann.
[0] 657d0f585a
Co-authored-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200108162428.25014-2-mrostecki@opensuse.org
Introduce a new bpf_prog_attach_xattr function that, in addition to
program fd, target fd and attach type, accepts an extendable struct
bpf_prog_attach_opts.
bpf_prog_attach_opts relies on DECLARE_LIBBPF_OPTS macro to maintain
backward and forward compatibility and has the following "optional"
attach attributes:
* existing attach_flags, since it's not required when attaching in NONE
mode. Even though it's quite often used in MULTI and OVERRIDE mode it
seems to be a good idea to reduce number of arguments to
bpf_prog_attach_xattr;
* newly introduced attribute of BPF_PROG_ATTACH command: replace_prog_fd
that is fd of previously attached cgroup-bpf program to replace if
BPF_F_REPLACE flag is used.
The new function is named to be consistent with other xattr-functions
(bpf_prog_test_run_xattr, bpf_create_map_xattr, bpf_load_program_xattr).
The struct bpf_prog_attach_opts is supposed to be used with
DECLARE_LIBBPF_OPTS macro.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/bd6e0732303eb14e4b79cb128268d9e9ad6db208.1576741281.git.rdna@fb.com
There are cases in which BPF resource (program, map, etc) has to outlive
userspace program that "installed" it in the system in the first place.
When BPF program is attached, libbpf returns bpf_link object, which
is supposed to be destroyed after no longer necessary through
bpf_link__destroy() API. Currently, bpf_link destruction causes both automatic
detachment and frees up any resources allocated to for bpf_link in-memory
representation. This is inconvenient for the case described above because of
coupling of detachment and resource freeing.
This patch introduces bpf_link__disconnect() API call, which marks bpf_link as
disconnected from its underlying BPF resouces. This means that when bpf_link
is destroyed later, all its memory resources will be freed, but BPF resource
itself won't be detached.
This design allows to follow strict and resource-leak-free design by default,
while giving easy and straightforward way for user code to opt for keeping BPF
resource attached beyond lifetime of a bpf_link. For some BPF programs (i.e.,
FS-based tracepoints, kprobes, raw tracepoint, etc), user has to make sure to
pin BPF program to prevent kernel to automatically detach it on process exit.
This should typically be achived by pinning BPF program (or map in some cases)
in BPF FS.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191218225039.2668205-1-andriin@fb.com
Add new set of APIs, allowing to open/load/attach BPF object through BPF
object skeleton, generated by bpftool for a specific BPF object file. All the
xxx_skeleton() APIs wrap up corresponding bpf_object_xxx() APIs, but
additionally also automate map/program lookups by name, global data
initialization and mmap()-ing, etc. All this greatly improves and simplifies
userspace usability of working with BPF programs. See follow up patches for
examples.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-13-andriin@fb.com
Add APIs to get BPF program function name, as opposed to bpf_program__title(),
which returns BPF program function's section name. Function name has a benefit
of being a valid C identifier and uniquely identifies a specific BPF program,
while section name can be duplicated across multiple independent BPF programs.
Add also bpf_object__find_program_by_name(), similar to
bpf_object__find_program_by_title(), to facilitate looking up BPF programs by
their C function names.
Convert one of selftests to new API for look up.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-9-andriin@fb.com
Expose API that allows to emit type declaration and field/variable definition
(if optional field name is specified) in valid C syntax for any provided BTF
type. This is going to be used by bpftool when emitting data section layout as
a struct. As part of making this API useful in a stand-alone fashion, move
initialization of some of the internal btf_dump state to earlier phase.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-8-andriin@fb.com
Generalize BPF program attaching and allow libbpf to auto-detect type (and
extra parameters, where applicable) and attach supported BPF program types
based on program sections. Currently this is supported for:
- kprobe/kretprobe;
- tracepoint;
- raw tracepoint;
- tracing programs (typed raw TP/fentry/fexit).
More types support can be trivially added within this framework.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-3-andriin@fb.com
New development cycles starts, bump to v0.0.7 proactively.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191209224022.3544519-1-andriin@fb.com
Teach libbpf to recognize tracing programs types and attach them to
fentry/fexit.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-7-ast@kernel.org
Introduce btf__find_by_name_kind() helper to search BTF by name and kind, since
name alone can be ambiguous.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-6-ast@kernel.org
This adds a new getter for the BPF program size (in bytes). This is useful
for a caller that is trying to predict how much memory will be locked by
loading a BPF object into the kernel.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333185272.88376.10996937115395724683.stgit@toke.dk
Currently, libbpf only provides a function to get a single ID for the XDP
program attached to the interface. However, it can be useful to get the
full set of program IDs attached, along with the attachment mode, in one
go. Add a new getter function to support this, using an extendible
structure to carry the information. Express the old bpf_get_link_id()
function in terms of the new function.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157333185164.88376.7520653040667637246.stgit@toke.dk
Support storing and setting a pin path in struct bpf_map, which can be used
for automatic pinning. Also store the pin status so we can avoid attempts
to re-pin a map that has already been pinned (or reused from a previous
pinning).
The behaviour of bpf_object__{un,}pin_maps() is changed so that if it is
called with a NULL path argument (which was previously illegal), it will
(un)pin only those maps that have a pin_path set.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297876.394725.14782206533681896279.stgit@toke.dk
There are bpf_program__set_type() and
bpf_program__set_expected_attach_type(), but no corresponding getters,
which seems rather incomplete. Fix this.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-3-andriin@fb.com
Add new set of bpf_object__open APIs using new approach to optional
parameters extensibility allowing simpler ABI compatibility approach.
This patch demonstrates an approach to implementing libbpf APIs that
makes it easy to extend existing APIs with extra optional parameters in
such a way, that ABI compatibility is preserved without having to do
symbol versioning and generating lots of boilerplate code to handle it.
To facilitate succinct code for working with options, add OPTS_VALID,
OPTS_HAS, and OPTS_GET macros that hide all the NULL, size, and zero
checks.
Additionally, newly added libbpf APIs are encouraged to follow similar
pattern of having all mandatory parameters as formal function parameters
and always have optional (NULL-able) xxx_opts struct, which should
always have real struct size as a first field and the rest would be
optional parameters added over time, which tune the behavior of existing
API, if specified by user.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
New release cycle started, let's bump to v0.0.6 proactively.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190930222503.519782-1-andriin@fb.com
This patch adds a 'flags' field to the umem_config and umem_reg structs.
This will allow for more options to be added for configuring umems.
The first use for the flags field is to add a flag for unaligned chunks
mode. These flags can either be user-provided or filled with a default.
Since we change the size of the xsk_umem_config struct, we need to version
the ABI. This patch includes the ABI versioning for xsk_umem__create. The
Makefile was also updated to handle multiple function versions in
check-abi.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add an API function taking a BTF object id and providing the id of the
next BTF object in the kernel. This can be used to list all BTF objects
loaded on the system.
v2:
- Rebase on top of Andrii's changes regarding libbpf versioning.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently libbpf version is specified in 2 places: libbpf.map and
Makefile. They easily get out of sync and it's very easy to update one,
but forget to update another one. In addition, Github projection of
libbpf has to maintain its own version which has to be remembered to be
kept in sync manually, which is very error-prone approach.
This patch makes libbpf.map a source of truth for libbpf version and
uses shell invocation to parse out correct full and major libbpf version
to use during build. Now we need to make sure that once new release
cycle starts, we need to add (initially) empty section to libbpf.map
with correct latest version.
This also will make it possible to keep Github projection consistent
with kernel sources version of libbpf by adopting similar parsing of
version from libbpf.map.
v2->v3:
- grep -o + sort -rV (Andrey);
v1->v2:
- eager version vars evaluation (Jakub);
- simplified version regex (Andrey);
Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_MAP_TYPE_PERF_EVENT_ARRAY map is often used to send data from BPF program
to user space for additional processing. libbpf already has very low-level API
to read single CPU perf buffer, bpf_perf_event_read_simple(), but it's hard to
use and requires a lot of code to set everything up. This patch adds
perf_buffer abstraction on top of it, abstracting setting up and polling
per-CPU logic into simple and convenient API, similar to what BCC provides.
perf_buffer__new() sets up per-CPU ring buffers and updates corresponding BPF
map entries. It accepts two user-provided callbacks: one for handling raw
samples and one for get notifications of lost samples due to buffer overflow.
perf_buffer__new_raw() is similar, but provides more control over how
perf events are set up (by accepting user-provided perf_event_attr), how
they are handled (perf_event_header pointer is passed directly to
user-provided callback), and on which CPUs ring buffers are created
(it's possible to provide a list of CPUs and corresponding map keys to
update). This API allows advanced users fuller control.
perf_buffer__poll() is used to fetch ring buffer data across all CPUs,
utilizing epoll instance.
perf_buffer__free() does corresponding clean up and unsets FDs from BPF map.
All APIs are not thread-safe. User should ensure proper locking/coordination if
used in multi-threaded set up.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a wrapper utilizing bpf_link "infrastructure" to allow attaching BPF
programs to raw tracepoints.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Allow attaching BPF programs to kernel tracepoint BPF hooks specified by
category and name.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add ability to attach to kernel and user probes and retprobes.
Implementation depends on perf event support for kprobes/uprobes.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_program__attach_perf_event allows to attach BPF program to existing
perf event hook, providing most generic and most low-level way to attach BPF
programs. It returns struct bpf_link, which should be passed to
bpf_link__destroy to detach and free resources, associated with a link.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_link is an abstraction of an association of a BPF program and one of
many possible BPF attachment points (hooks). This allows to have uniform
interface for detaching BPF programs regardless of the nature of link
and how it was created. Details of creation and setting up of a specific
bpf_link is handled by corresponding attachment methods
(bpf_program__attach_xxx) added in subsequent commits. Once successfully
created, bpf_link has to be eventually destroyed with
bpf_link__destroy(), at which point BPF program is disassociated from
a hook and all the relevant resources are freed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding a new API libbpf_num_possible_cpus() that helps user with
per-CPU map operations.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf was recently made aware of the log_level attribute for programs,
used to specify the level of information expected to be dumped by the
verifier. Function bpf_prog_load_xattr() got support for this log_level
parameter.
But some applications using libbpf rely on another function to load
programs, bpf_object__load(), which does accept any parameter for log
level. Create an API function based on bpf_object__load(), but accepting
an "attr" object as a parameter. Then add a log_level field to that
object, so that applications calling the new bpf_object__load_xattr()
can pick the desired log level.
v3:
- Rewrite commit log.
v2:
- We are in a new cycle, bump libbpf extraversion number.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BTF contains enough type information to allow generating valid
compilable C header w/ correct layout of structs/unions and all the
typedef/enum definitions. This patch adds a new "object" - btf_dump to
facilitate dumping BTF as valid C. btf_dump__dump_type() is the main API
which takes care of dumping out (through user-provided printf-like
callback function) C definitions for given type ID and it's required
dependencies. This allows for not just dumping out entirety of BTF types,
but also selective filtering based on user-provided criterias w/ minimal
set of dependent types.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Loading BTF and BTF.ext from ELF file is a common need. Instead of
requiring every user to re-implement it, let's provide this API from
libbpf itself. It's mostly copy/paste from `bpftool btf dump`
implementation, which will be switched to libbpf's version in next
patch. btf__parse_elf allows to load BTF and optionally BTF.ext.
This is also useful for tests that need to load/work with BTF, loaded
from test ELF files.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds libbpf support for BTF Var and DataSec kinds. Main point
here is that libbpf needs to do some preparatory work before the
whole BTF object can be loaded into the kernel, that is, fixing up
of DataSec size taken from the ELF section size and non-static
variable offset which needs to be taken from the ELF's string section.
Upstream LLVM doesn't fix these up since at time of BTF emission
it is too early in the compilation process thus this information
isn't available yet, hence loader needs to take care of it.
Note, deduplication handling has not been in the scope of this work
and needs to be addressed in a future commit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://reviews.llvm.org/D59441
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work adds BPF loader support for global data sections
to libbpf. This allows to write BPF programs in more natural
C-like way by being able to define global variables and const
data.
Back at LPC 2018 [0] we presented a first prototype which
implemented support for global data sections by extending BPF
syscall where union bpf_attr would get additional memory/size
pair for each section passed during prog load in order to later
add this base address into the ldimm64 instruction along with
the user provided offset when accessing a variable. Consensus
from LPC was that for proper upstream support, it would be
more desirable to use maps instead of bpf_attr extension as
this would allow for introspection of these sections as well
as potential live updates of their content. This work follows
this path by taking the following steps from loader side:
1) In bpf_object__elf_collect() step we pick up ".data",
".rodata", and ".bss" section information.
2) If present, in bpf_object__init_internal_map() we add
maps to the obj's map array that corresponds to each
of the present sections. Given section size and access
properties can differ, a single entry array map is
created with value size that is corresponding to the
ELF section size of .data, .bss or .rodata. These
internal maps are integrated into the normal map
handling of libbpf such that when user traverses all
obj maps, they can be differentiated from user-created
ones via bpf_map__is_internal(). In later steps when
we actually create these maps in the kernel via
bpf_object__create_maps(), then for .data and .rodata
sections their content is copied into the map through
bpf_map_update_elem(). For .bss this is not necessary
since array map is already zero-initialized by default.
Additionally, for .rodata the map is frozen as read-only
after setup, such that neither from program nor syscall
side writes would be possible.
3) In bpf_program__collect_reloc() step, we record the
corresponding map, insn index, and relocation type for
the global data.
4) And last but not least in the actual relocation step in
bpf_program__relocate(), we mark the ldimm64 instruction
with src_reg = BPF_PSEUDO_MAP_VALUE where in the first
imm field the map's file descriptor is stored as similarly
done as in BPF_PSEUDO_MAP_FD, and in the second imm field
(as ldimm64 is 2-insn wide) we store the access offset
into the section. Given these maps have only single element
ldimm64's off remains zero in both parts.
5) On kernel side, this special marked BPF_PSEUDO_MAP_VALUE
load will then store the actual target address in order
to have a 'map-lookup'-free access. That is, the actual
map value base address + offset. The destination register
in the verifier will then be marked as PTR_TO_MAP_VALUE,
containing the fixed offset as reg->off and backing BPF
map as reg->map_ptr. Meaning, it's treated as any other
normal map value from verification side, only with
efficient, direct value access instead of actual call to
map lookup helper as in the typical case.
Currently, only support for static global variables has been
added, and libbpf rejects non-static global variables from
loading. This can be lifted until we have proper semantics
for how BPF will treat multi-object BPF loads. From BTF side,
libbpf will set the value type id of the types corresponding
to the ".bss", ".data" and ".rodata" names which LLVM will
emit without the object name prefix. The key type will be
left as zero, thus making use of the key-less BTF option in
array maps.
Simple example dump of program using globals vars in each
section:
# bpftool prog
[...]
6784: sched_cls name load_static_dat tag a7e1291567277844 gpl
loaded_at 2019-03-11T15:39:34+0000 uid 0
xlated 1776B jited 993B memlock 4096B map_ids 2238,2237,2235,2236,2239,2240
# bpftool map show id 2237
2237: array name test_glo.bss flags 0x0
key 4B value 64B max_entries 1 memlock 4096B
# bpftool map show id 2235
2235: array name test_glo.data flags 0x0
key 4B value 64B max_entries 1 memlock 4096B
# bpftool map show id 2236
2236: array name test_glo.rodata flags 0x80
key 4B value 96B max_entries 1 memlock 4096B
# bpftool prog dump xlated id 6784
int load_static_data(struct __sk_buff * skb):
; int load_static_data(struct __sk_buff *skb)
0: (b7) r6 = 0
; test_reloc(number, 0, &num0);
1: (63) *(u32 *)(r10 -4) = r6
2: (bf) r2 = r10
; int load_static_data(struct __sk_buff *skb)
3: (07) r2 += -4
; test_reloc(number, 0, &num0);
4: (18) r1 = map[id:2238]
6: (18) r3 = map[id:2237][0]+0 <-- direct addr in .bss area
8: (b7) r4 = 0
9: (85) call array_map_update_elem#100464
10: (b7) r1 = 1
; test_reloc(number, 1, &num1);
[...]
; test_reloc(string, 2, str2);
120: (18) r8 = map[id:2237][0]+16 <-- same here at offset +16
122: (18) r1 = map[id:2239]
124: (18) r3 = map[id:2237][0]+16
126: (b7) r4 = 0
127: (85) call array_map_update_elem#100464
128: (b7) r1 = 120
; str1[5] = 'x';
129: (73) *(u8 *)(r9 +5) = r1
; test_reloc(string, 3, str1);
130: (b7) r1 = 3
131: (63) *(u32 *)(r10 -4) = r1
132: (b7) r9 = 3
133: (bf) r2 = r10
; int load_static_data(struct __sk_buff *skb)
134: (07) r2 += -4
; test_reloc(string, 3, str1);
135: (18) r1 = map[id:2239]
137: (18) r3 = map[id:2235][0]+16 <-- direct addr in .data area
139: (b7) r4 = 0
140: (85) call array_map_update_elem#100464
141: (b7) r1 = 111
; __builtin_memcpy(&str2[2], "hello", sizeof("hello"));
142: (73) *(u8 *)(r8 +6) = r1 <-- further access based on .bss data
143: (b7) r1 = 108
144: (73) *(u8 *)(r8 +5) = r1
[...]
For Cilium use-case in particular, this enables migrating configuration
constants from Cilium daemon's generated header defines into global
data sections such that expensive runtime recompilations with LLVM can
be avoided altogether. Instead, the ELF file becomes effectively a
"template", meaning, it is compiled only once (!) and the Cilium daemon
will then rewrite relevant configuration data from the ELF's .data or
.rodata sections directly instead of recompiling the program. The
updated ELF is then loaded into the kernel and atomically replaces
the existing program in the networking datapath. More info in [0].
Based upon recent fix in LLVM, commit c0db6b6bd444 ("[BPF] Don't fail
for static variables").
[0] LPC 2018, BPF track, "ELF relocation for static data in BPF",
http://vger.kernel.org/lpc-bpf2018.html#session-3
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, bpf_prog_info includes 9 arrays. The user has the option to
fetch any combination of these arrays. However, this requires a lot of
handling.
This work becomes more tricky when we need to store bpf_prog_info to a
file, because these arrays are allocated independently.
This patch introduces 'struct bpf_prog_info_linear', which stores arrays
of bpf_prog_info in continuous memory.
Helper functions are introduced to unify the work to get different sets
of bpf_prog_info. Specifically, bpf_program__get_prog_info_linear()
allows the user to select which arrays to fetch, and handles details for
the user.
Please see the comments right before 'enum bpf_prog_info_array' for more
details and examples.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lkml.kernel.org/r/ce92c091-e80d-a0c1-4aa0-987706c42b20@iogearbox.net
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit adds AF_XDP support to libbpf. The main reason for this is
to facilitate writing applications that use AF_XDP by offering
higher-level APIs that hide many of the details of the AF_XDP
uapi. This is in the same vein as libbpf facilitates XDP adoption by
offering easy-to-use higher level interfaces of XDP
functionality. Hopefully this will facilitate adoption of AF_XDP, make
applications using it simpler and smaller, and finally also make it
possible for applications to benefit from optimizations in the AF_XDP
user space access code. Previously, people just copied and pasted the
code from the sample application into their application, which is not
desirable.
The interface is composed of two parts:
* Low-level access interface to the four rings and the packet
* High-level control plane interface for creating and setting
up umems and af_xdp sockets as well as a simple XDP program.
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add new accessor for bpf_object to get opaque struct btf * from it.
struct btf * is needed for all operations with BTF and it's present in
bpf_object. The only thing missing is a way to get it.
Example use-case is to get BTF key_type_id and value_type_id for a map in
bpf_object. It can be done with btf__get_map_kv_tids() but that function
requires struct btf *.
Similar API can be added for struct btf_ext but no use-case for it yet.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add bpf_map__resize() to change max_entries for a map.
Quite often necessary map size is unknown at compile time and can be
calculated only at run time.
Currently the following approach is used to do so:
* bpf_object__open_buffer() to open Elf file from a buffer;
* bpf_object__find_map_by_name() to find relevant map;
* bpf_map__def() to get map attributes and create struct
bpf_create_map_attr from them;
* update max_entries in bpf_create_map_attr;
* bpf_create_map_xattr() to create new map with updated max_entries;
* bpf_map__reuse_fd() to replace the map in bpf_object with newly
created one.
And after all this bpf_object can finally be loaded. The map will have
new size.
It 1) is quite a lot of steps; 2) doesn't take BTF into account.
For "2)" even more steps should be made and some of them require changes
to libbpf (e.g. to get struct btf * from bpf_object).
Instead the whole problem can be solved by introducing simple
bpf_map__resize() API that checks the map and sets new max_entries if
the map is not loaded yet.
So the new steps are:
* bpf_object__open_buffer() to open Elf file from a buffer;
* bpf_object__find_map_by_name() to find relevant map;
* bpf_map__resize() to update max_entries.
That's much simpler and works with BTF.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Now that we have btf__get_raw_data() it's trivial for tests to iterate
over all strings for testing purposes, which eliminates the need for
btf__get_strings() API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch changes struct btf_ext to retain original data in sequential
block of memory, which makes it possible to expose
btf_ext__get_raw_data() interface similar to btf__get_raw_data(), allowing
users of libbpf to get access to raw representation of .BTF.ext section.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch exposes new API btf__get_raw_data() that allows to get a copy
of raw BTF data out of struct btf. This is useful for external programs
that need to manipulate raw data, e.g., pahole using btf__dedup() to
deduplicate BTF type info and then writing it back to file.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change splits out previous btf__new functionality of constructing
struct btf and loading it into kernel into two:
- btf__new() just creates and initializes struct btf
- btf__load() attempts to load existing struct btf into kernel
btf__free will still close BTF fd, if it was ever loaded successfully
into kernel.
This change allows users of libbpf to manipulate BTF using its API,
without the need to unnecessarily load it into kernel.
One of the intended use cases is pahole, which will do DWARF to BTF
conversion and then use libbpf to do type deduplication, while then
handling ELF sections overwriting and other concerns on its own.
Fixes: 2d3feca8c4 ("bpf: btf: print map dump and lookup with btf info")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch sets up a new kind of tests (BTF dedup tests) and tests few aspects of
BTF dedup algorithm. More complete set of tests will come in follow up patches.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch implements BTF types deduplication algorithm. It allows to
greatly compress typical output of pahole's DWARF-to-BTF conversion or
LLVM's compilation output by detecting and collapsing identical types emitted in
isolation per compilation unit. Algorithm also resolves struct/union forward
declarations into concrete BTF types representing referenced struct/union. If
undesired, this resolution can be disabled through specifying corresponding options.
Algorithm itself and its application to Linux kernel's BTF types is
described in details at:
https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, to get map key/value type id's, the macro
BPF_ANNOTATE_KV_PAIR(<map_name>, <key_type>, <value_type>)
needs to be defined in the bpf program for the
corresponding map.
During program/map loading time,
the local static function bpf_map_find_btf_info()
in libbpf.c is implemented to retrieve the key/value
type ids given the map name.
The patch refactored function bpf_map_find_btf_info()
to create an API btf__get_map_kv_tids() which includes
the bulk of implementation for the original function.
The API btf__get_map_kv_tids() can be used by bcc,
a JIT based bpf compilation system, which uses the
same BPF_ANNOTATE_KV_PAIR to record map key/value types.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following set of functions, which manipulates .BTF.ext
section, are exposed as API functions:
. btf_ext__new
. btf_ext__free
. btf_ext__reloc_func_info
. btf_ext__reloc_line_info
. btf_ext__func_info_rec_size
. btf_ext__line_info_rec_size
These functions are useful for JIT based bpf codegen, e.g.,
bcc, to manipulate in-memory .BTF.ext sections.
The signature of function btf_ext__reloc_func_info()
is also changed to be the same as its definition in btf.c.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since we have a dedicated netlink attributes for xdp setup on a
particular interface, it is now possible to retrieve the program id that
is currently attached to the interface. The use case is targeted for
sample xdp programs, which will store the program id just after loading
bpf program onto iface. On shutdown, the sample will make sure that it
can unload the program by querying again the iface and verifying that
both program id's matches.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
XDP samples are mostly cooperating with eBPF maps through their file
descriptors. In case of a eBPF program that contains multiple maps it
might be tiresome to iterate through them and call bpf_map__fd for each
one. Add a helper mostly based on bpf_object__find_map_by_name, but
instead of returning the struct bpf_map pointer, return map fd.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Similarly to what was done for program types and map types, add a set of
probes to test the availability of the different eBPF helper functions
on the current system.
For each known program type, all known helpers are tested, in order to
establish a compatibility matrix. Output is provided as a set of lists
of available helpers, one per program type.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF helper functions...
eBPF helpers supported for program type socket_filter:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
eBPF helpers supported for program type kprobe:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
# bpftool --json --pretty feature probe kernel
{
...
"helpers": {
"socket_filter_available_helpers": ["bpf_map_lookup_elem", \
"bpf_map_update_elem","bpf_map_delete_elem", ...
],
"kprobe_available_helpers": ["bpf_map_lookup_elem", \
"bpf_map_update_elem","bpf_map_delete_elem", ...
],
...
}
}
v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.
v4:
- Use "enum bpf_func_id" instead of "__u32" in bpf_probe_helper()
declaration for the type of the argument used to pass the id of
the helper to probe.
- Undef BPF_HELPER_MAKE_ENTRY after using it.
v3:
- Do not pass kernel version from bpftool to libbpf probes (kernel
version for testing program with kprobes is retrieved directly from
libbpf).
- Dump one list of available helpers per program type (instead of one
list of compatible program types per helper).
v2:
- Move probes from bpftool to libbpf.
- Test all program types for each helper, print a list of working prog
types for each helper.
- Fall back on include/uapi/linux/bpf.h for names and ids of helpers.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new probes for eBPF map types, to detect what are the ones available
on the system. Try creating one map of each type, and see if the kernel
complains.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF map types...
eBPF map_type hash is available
eBPF map_type array is available
eBPF map_type prog_array is available
...
# bpftool --json --pretty feature probe kernel
{
...
"map_types": {
"have_hash_map_type": true,
"have_array_map_type": true,
"have_prog_array_map_type": true,
...
}
}
v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.
v3:
- Use a switch with all enum values for setting specific map parameters,
so that gcc complains at compile time (-Wswitch-enum) if new map types
were added to the kernel but libbpf was not updated.
v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce probes for supported BPF program types in libbpf, and call it
from bpftool to test what types are available on the system. The probe
simply consists in loading a very basic program of that type and see if
the verifier complains or not.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF program types...
eBPF program_type socket_filter is available
eBPF program_type kprobe is available
eBPF program_type sched_cls is available
...
# bpftool --json --pretty feature probe kernel
{
...
"program_types": {
"have_socket_filter_prog_type": true,
"have_kprobe_prog_type": true,
"have_sched_cls_prog_type": true,
...
}
}
v5:
- In libbpf.map, move global symbol to a new LIBBPF_0.0.2 section.
- Rename (non-API function) prog_load() as probe_load().
v3:
- Get kernel version for checking kprobes availability from libbpf
instead of from bpftool. Do not pass kernel_version as an argument
when calling libbpf probes.
- Use a switch with all enum values for setting specific program
parameters just before probing, so that gcc complains at compile time
(-Wswitch-enum) if new prog types were added to the kernel but libbpf
was not updated.
- Add a comment in libbpf.h about setrlimit() usage to allow many
consecutive probe attempts.
v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new function, which encourages safe usage of the test interface.
bpf_prog_test_run continues to work as before, but should be considered
unsafe.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
More and more projects use libbpf and one day it'll likely be packaged
and distributed as DSO and that requires ABI versioning so that both
compatible and incompatible changes to ABI can be introduced in a safe
way in the future without breaking executables dynamically linked with a
previous version of the library.
Usual way to do ABI versioning is version script for the linker. Add
such a script for libbpf. All global symbols currently exported via
LIBBPF_API macro are added to the version script libbpf.map.
The version name LIBBPF_0.0.1 is constructed from the name of the
library + version specified by $(LIBBPF_VERSION) in Makefile.
Version script does not duplicate the work done by LIBBPF_API macro, it
rather complements it. The macro is used at compile time and can be used
by compiler to do optimization that can't be done at link time, it is
purely about global symbol visibility. The version script, in turn, is
used at link time and takes care of ABI versioning. Both techniques are
described in details in [1].
Whenever ABI is changed in the future, version script should be changed
appropriately.
[1] https://www.akkadia.org/drepper/dsohowto.pdf
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
