The only factor differentiating per-CPU bstats data type (struct
gnet_stats_basic_cpu) from the packed non-per-CPU one (struct
gnet_stats_basic_packed) was a u64_stats sync point inside the former.
The two data types are now equivalent: earlier commits added a u64_stats
sync point to the latter.
Combine both data types into "struct gnet_stats_basic_sync". This
eliminates redundancy and simplifies the bstats read/write APIs.
Use u64_stats_t for bstats "packets" and "bytes" data types. On 64-bit
architectures, u64_stats sync points do not use sequence counter
protection.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Qdisc::running sequence counter, used to protect Qdisc::bstats reads
from parallel writes, is in the process of being removed. Qdisc::bstats
read/writes will synchronize using an internal u64_stats sync point
instead.
Modify all bstats writes to use _bstats_update(). This ensures that
the internal u64_stats sync point is always acquired and released as
appropriate.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The not-per-CPU variant of qdisc tc (traffic control) statistics,
Qdisc::gnet_stats_basic_packed bstats, is protected with Qdisc::running
sequence counter.
This sequence counter is used for reliably protecting bstats reads from
parallel writes. Meanwhile, the seqcount's write section covers a much
wider area than bstats update: qdisc_run_begin() => qdisc_run_end().
That read/write section asymmetry can lead to needless retries of the
read section. To prepare for removing the Qdisc::running sequence
counter altogether, introduce a u64_stats sync point inside bstats
instead.
Modify _bstats_update() to start/end the bstats u64_stats write
section.
For bisectability, and finer commits granularity, the bstats read
section is still protected with a Qdisc::running read/retry loop and
qdisc_run_begin/end() still starts/ends that seqcount write section.
Once all call sites are modified to use _bstats_update(), the
Qdisc::running seqcount will be removed and bstats read/retry loop will
be modified to utilize the internal u64_stats sync point.
Note, using u64_stats implies no sequence counter protection for 64-bit
architectures. This can lead to the statistics "packets" vs. "bytes"
values getting out of sync on rare occasions. The individual values will
still be valid.
[bigeasy: Minor commit message edits, init all gnet_stats_basic_packed.]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The gnet_stats_queue::qlen member is only used in the SMP-case.
qdisc_qstats_qlen_backlog() needs to add qdisc_qlen() to qstats.qlen to
have the same value as that provided by qdisc_qlen_sum().
gnet_stats_copy_queue() needs to overwritte the resulting qstats.qlen
field whith the caller submitted qlen value. It might be differ from the
submitted value.
Let both functions use gnet_stats_add_queue() and remove unused
__gnet_stats_copy_queue().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function will replace __gnet_stats_copy_queue(). It reads all
arguments and adds them into the passed gnet_stats_queue argument.
In contrast to __gnet_stats_copy_queue() it also copies the qlen member.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
__gnet_stats_copy_basic() always assigns the value to the bstats
argument overwriting the previous value. The later added per-CPU version
always accumulated the values in the returning gnet_stats_basic_packed
argument.
Based on review there are five users of that function as of today:
- est_fetch_counters(), ___gnet_stats_copy_basic()
memsets() bstats to zero, single invocation.
- mq_dump(), mqprio_dump(), mqprio_dump_class_stats()
memsets() bstats to zero, multiple invocation but does not use the
function due to !qdisc_is_percpu_stats().
Add the values in __gnet_stats_copy_basic() instead overwriting. Rename
the function to gnet_stats_add_basic() to make it more obvious.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of netdev helper functions to improve code readability.
Replace 'dev->priv_flags & IFF_EBRIDGE' with netif_is_bridge_master(dev).
Signed-off-by: Kyungrok Chung <acadx0@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_stream_kill_queues() can be called on close when there are
still outstanding skbs to transmit. Those skbs may try to queue
notifications to the error queue (e.g. timestamps).
If sk_stream_kill_queues() purges the queue without taking
its lock the queue may get corrupted, and skbs leaked.
This shows up as a warning about an rmem leak:
WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x...
The leak is always a multiple of 0x300 bytes (the value is in
%rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of
an empty sk_buff. Indeed if we dump the socket state at the time
of the warning the sk_error_queue is often (but not always)
corrupted. The ->next pointer points back at the list head,
but not the ->prev pointer. Indeed we can find the leaked skb
by scanning the kernel memory for something that looks like
an skb with ->sk = socket in question, and ->truesize = 0x300.
The contents of ->cb[] of the skb confirms the suspicion that
it is indeed a timestamp notification (as generated in
__skb_complete_tx_timestamp()).
Removing purging of sk_error_queue should be okay, since
inet_sock_destruct() does it again once all socket refs
are gone. Eric suggests this may cause sockets that go
thru disconnect() to maintain notifications from the
previous incarnations of the socket, but that should be
okay since the race was there anyway, and disconnect()
is not exactly dependable.
Thanks to Jonathan Lemon and Omar Sandoval for help at various
stages of tracing the issue.
Fixes: cb9eff0978 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the 32-bit arch with 64-bit DMA seems to rare those days,
and page pool might carry a lot of code and complexity for
systems that possibly.
So disable dma mapping support for such systems, if drivers
really want to work on such systems, they have to implement
their own DMA-mapping fallback tracking outside page_pool.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The combination of NUD_PERMANENT + NTF_MANAGED is not supported and does
not make sense either given the former indicates a static/fixed neighbor
entry whereas the latter a dynamically resolved one. While it is possible
to transition from one over to the other, we should however reject such
creation attempts.
Fixes: 7482e3841d ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries")
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of open-coding a check for invalid bits in NTF_EXT_MASK, we can just
use the NLA_POLICY_MASK() helper instead, and simplify NDA_FLAGS_EXT sanity
check this way.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, NDA_FLAGS_EXT flags allow a maximum of 24 bits to be used for
extended neighbor flags. These are eventually fed into neigh->flags by
shifting with NTF_EXT_SHIFT as per commit 2c611ad97a ("net, neigh:
Extend neigh->flags to 32 bit to allow for extensions").
If really ever needed in future, the full 32 bits from NDA_FLAGS_EXT can
be used, it would only require to move neigh->flags from u32 to u64 inside
the kernel.
Add a build-time assertion such that when extending the NTF_EXT_MASK with
new bits, we'll trigger an error once we surpass the 24th bit. This assumes
that no bit holes in new NTF_EXT_* flags will slip in from UAPI, but I
think this is reasonable to assume.
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support classifying packets with netfilter on egress to satisfy user
requirements such as:
* outbound security policies for containers (Laura)
* filtering and mangling intra-node Direct Server Return (DSR) traffic
on a load balancer (Laura)
* filtering locally generated traffic coming in through AF_PACKET,
such as local ARP traffic generated for clustering purposes or DHCP
(Laura; the AF_PACKET plumbing is contained in a follow-up commit)
* L2 filtering from ingress and egress for AVB (Audio Video Bridging)
and gPTP with nftables (Pablo)
* in the future: in-kernel NAT64/NAT46 (Pablo)
The egress hook introduced herein complements the ingress hook added by
commit e687ad60af ("netfilter: add netfilter ingress hook after
handle_ing() under unique static key"). A patch for nftables to hook up
egress rules from user space has been submitted separately, so users may
immediately take advantage of the feature.
Alternatively or in addition to netfilter, packets can be classified
with traffic control (tc). On ingress, packets are classified first by
tc, then by netfilter. On egress, the order is reversed for symmetry.
Conceptually, tc and netfilter can be thought of as layers, with
netfilter layered above tc.
Traffic control is capable of redirecting packets to another interface
(man 8 tc-mirred). E.g., an ingress packet may be redirected from the
host namespace to a container via a veth connection:
tc ingress (host) -> tc egress (veth host) -> tc ingress (veth container)
In this case, netfilter egress classifying is not performed when leaving
the host namespace! That's because the packet is still on the tc layer.
If tc redirects the packet to a physical interface in the host namespace
such that it leaves the system, the packet is never subjected to
netfilter egress classifying. That is only logical since it hasn't
passed through netfilter ingress classifying either.
Packets can alternatively be redirected at the netfilter layer using
nft fwd. Such a packet *is* subjected to netfilter egress classifying
since it has reached the netfilter layer.
Internally, the skb->nf_skip_egress flag controls whether netfilter is
invoked on egress by __dev_queue_xmit(). Because __dev_queue_xmit() may
be called recursively by tunnel drivers such as vxlan, the flag is
reverted to false after sch_handle_egress(). This ensures that
netfilter is applied both on the overlay and underlying network.
Interaction between tc and netfilter is possible by setting and querying
skb->mark.
If netfilter egress classifying is not enabled on any interface, it is
patched out of the data path by way of a static_key and doesn't make a
performance difference that is discernible from noise:
Before: 1537 1538 1538 1537 1538 1537 Mb/sec
After: 1536 1534 1539 1539 1539 1540 Mb/sec
Before + tc accept: 1418 1418 1418 1419 1419 1418 Mb/sec
After + tc accept: 1419 1424 1418 1419 1422 1420 Mb/sec
Before + tc drop: 1620 1619 1619 1619 1620 1620 Mb/sec
After + tc drop: 1616 1624 1625 1624 1622 1619 Mb/sec
When netfilter egress classifying is enabled on at least one interface,
a minimal performance penalty is incurred for every egress packet, even
if the interface it's transmitted over doesn't have any netfilter egress
rules configured. That is caused by checking dev->nf_hooks_egress
against NULL.
Measurements were performed on a Core i7-3615QM. Commands to reproduce:
ip link add dev foo type dummy
ip link set dev foo up
modprobe pktgen
echo "add_device foo" > /proc/net/pktgen/kpktgend_3
samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh -i foo -n 400000000 -m "11:11:11:11:11:11" -d 1.1.1.1
Accept all traffic with tc:
tc qdisc add dev foo clsact
tc filter add dev foo egress bpf da bytecode '1,6 0 0 0,'
Drop all traffic with tc:
tc qdisc add dev foo clsact
tc filter add dev foo egress bpf da bytecode '1,6 0 0 2,'
Apply this patch when measuring packet drops to avoid errors in dmesg:
https://lore.kernel.org/netdev/a73dda33-57f4-95d8-ea51-ed483abd6a7a@iogearbox.net/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Laura García Liébana <nevola@gmail.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prepare for addition of a netfilter egress hook by generalizing the
ingress hook include file.
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prepare for addition of a netfilter egress hook by renaming
<linux/netfilter_ingress.h> to <linux/netfilter_netdev.h>.
The egress hook also necessitates a refactoring of the include file,
but that is done in a separate commit to ease reviewing.
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit a0c76345e3 ("devlink: disallow reload operation during device
cleanup") added devlink_reload_{enable,disable}() APIs to prevent reload
operation from racing with device probe/dismantle.
After recent changes to move devlink_register() to the end of device
probe and devlink_unregister() to the beginning of device dismantle,
these races can no longer happen. Reload operations will be denied if
the devlink instance is unregistered and devlink_unregister() will block
until all in-flight operations are done.
Therefore, remove these devlink_reload_{enable,disable}() APIs.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce new devlink call to set feature mask to control devlink
behavior during device initialization phase after devlink_alloc()
is already called.
This allows us to set reload ops based on device property which
is not known at the beginning of driver initialization.
For the sake of simplicity, this API lacks any type of locking and
needs to be called before devlink_register() to make sure that no
parallel access to the ops is possible at this stage.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initial annotation patch to separate calls that needs to be executed
before or after devlink_register().
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both netdev_to_devlink and netdev_to_devlink_port are used in devlink.c
only, so move them in order to reduce their scope.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The declaration of struct devlink in general header provokes the
situation where internal fields can be accidentally used by the driver
authors. In order to reduce such possible situations, let's reduce the
namespace exposure of struct devlink.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow a user space control plane to insert entries with a new NTF_EXT_MANAGED
flag. The flag then indicates to the kernel that the neighbor entry should be
periodically probed for keeping the entry in NUD_REACHABLE state iff possible.
The use case for this is targeting XDP or tc BPF load-balancers which use
the bpf_fib_lookup() BPF helper in order to piggyback on neighbor resolution
for their backends. Given they cannot be resolved in fast-path, a control
plane inserts the L3 (without L2) entries manually into the neighbor table
and lets the kernel do the neighbor resolution either on the gateway or on
the backend directly in case the latter resides in the same L2. This avoids
to deal with L2 in the control plane and to rebuild what the kernel already
does best anyway.
NTF_EXT_MANAGED can be combined with NTF_EXT_LEARNED in order to avoid GC
eviction. The kernel then adds NTF_MANAGED flagged entries to a per-neighbor
table which gets triggered by the system work queue to periodically call
neigh_event_send() for performing the resolution. The implementation allows
migration from/to NTF_MANAGED neighbor entries, so that already existing
entries can be converted by the control plane if needed. Potentially, we could
make the interval for periodically calling neigh_event_send() configurable;
right now it's set to DELAY_PROBE_TIME which is also in line with mlxsw which
has similar driver-internal infrastructure c723c735fa ("mlxsw: spectrum_router:
Periodically update the kernel's neigh table"). In future, the latter could
possibly reuse the NTF_MANAGED neighbors as well.
Example:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 managed extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a managed extern_learn REACHABLE
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Link: https://linuxplumbersconf.org/event/11/contributions/953/
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, all bits in struct ndmsg's ndm_flags are used up with the most
recent addition of 435f2e7cc0 ("net: bridge: add support for sticky fdb
entries"). This makes it impossible to extend the neighboring subsystem
with new NTF_* flags:
struct ndmsg {
__u8 ndm_family;
__u8 ndm_pad1;
__u16 ndm_pad2;
__s32 ndm_ifindex;
__u16 ndm_state;
__u8 ndm_flags;
__u8 ndm_type;
};
There are ndm_pad{1,2} attributes which are not used. However, due to
uncareful design, the kernel does not enforce them to be zero upon new
neighbor entry addition, and given they've been around forever, it is
not possible to reuse them today due to risk of breakage. One option to
overcome this limitation is to add a new NDA_FLAGS_EXT attribute for
extended flags.
In struct neighbour, there is a 3 byte hole between protocol and ha_lock,
which allows neigh->flags to be extended from 8 to 32 bits while still
being on the same cacheline as before. This also allows for all future
NTF_* flags being in neigh->flags rather than yet another flags field.
Unknown flags in NDA_FLAGS_EXT will be rejected by the kernel.
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT
state and NTF_USE flag with a dynamic NUD state from a user space control plane.
Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing
neighbor entry in combination with NTF_USE flag.
This is due to the latter directly calling into neigh_event_send() without any
meta data updates as happening in __neigh_update(). Thus, to enable this use
case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the
NUD_PERMANENT state in particular so that a latter neigh_event_send() is able
to re-resolve a neighbor entry.
Before fix, NUD_PERMANENT -> NUD_* & NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
As can be seen, despite the admin-triggered replace, the entry remains in the
NUD_PERMANENT state.
After fix, NUD_PERMANENT -> NUD_* & NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
After the fix, the admin-triggered replace switches to a dynamic state from
the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can
transition back from there, if needed, into NUD_PERMANENT.
Similar before/after behavior can be observed for below transitions:
Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[..]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NTF_EXT_LEARNED neigh flag is usually propagated back to user space
upon dump of the neighbor table. However, when used in combination with
NTF_USE flag this is not the case despite exempting the entry from the
garbage collector. This results in inconsistent state since entries are
typically marked in neigh->flags with NTF_EXT_LEARNED, but here they are
not. Fix it by propagating the creation flag to ___neigh_create().
Before fix:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
After fix:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
Fixes: 9ce33e4653 ("neighbour: support for NTF_EXT_LEARNED flag")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cosmetic commit making dev_get_port_parent_id slightly more readable.
There is no need to split the condition to return after calling
devlink_compat_switch_id_get and after that 'recurse' is always true.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
__dev_get_by_name is currently used to either retrieve a net device
reference using its name or to check if a name is already used by a
registered net device (per ns). In the later case there is no need to
return a reference to a net device.
Introduce a new helper, netdev_name_in_use, to check if a name is
currently used by a registered net device without leaking a reference
the corresponding net device. This helper uses netdev_name_node_lookup
instead of __dev_get_by_name as we don't need the extra logic retrieving
a reference to the corresponding net device.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the timeval compat code from core/sock to handle 32-bit and
64-bit timeval structures. Also introduce a new socket option define
to allow using y2038 safe timeval under 32-bit.
The existing behavior of sock_set_timeout and vsock's timeout setter
differ when the time value is out of bounds. vsocks current behavior
is retained at the expense of not being able to share the full
implementation.
This allows the LTP test vsock01 to pass under 32-bit compat mode.
Fixes: fe0c72f3db ("socket: move compat timeout handling into sock.c")
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Cc: Richard Palethorpe <rpalethorpe@richiejp.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to deadlocks in the networking subsystem spotted 12 years ago[1],
a workaround was put in place[2] to avoid taking the rtnl lock when it
was not available and restarting the syscall (back to VFS, letting
userspace spin). The following construction is found a lot in the net
sysfs and sysctl code:
if (!rtnl_trylock())
return restart_syscall();
This can be problematic when multiple userspace threads use such
interfaces in a short period, making them to spin a lot. This happens
for example when adding and moving virtual interfaces: userspace
programs listening on events, such as systemd-udevd and NetworkManager,
do trigger actions reading files in sysfs. It gets worse when a lot of
virtual interfaces are created concurrently, say when creating
containers at boot time.
Returning early without hitting the above pattern when the syscall will
fail eventually does make things better. While it is not a fix for the
issue, it does ease things.
[1] https://lore.kernel.org/netdev/49A4D5D5.5090602@trash.net/https://lore.kernel.org/netdev/m14oyhis31.fsf@fess.ebiederm.org/
and https://lore.kernel.org/netdev/20090226084924.16cb3e08@nehalam/
[2] Rightfully, those deadlocks are *hard* to solve.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
There are roughly 40 places where netdev->dev_addr is passed
as the destination to a of_get_mac_address() call. Add a helper
which takes a dev pointer instead, so it can call an appropriate
helper.
Note that of_get_mac_address() already assumes the address is
6 bytes long (ETH_ALEN) so use eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rob suggests to move of_net.c from under drivers/of/ somewhere
to the networking code.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_fill_statsinfo() is filling skb with one mandatory if_stats_msg structure.
nlmsg_put(skb, pid, seq, type, sizeof(struct if_stats_msg), flags);
But if_nlmsg_stats_size() never considered the needed storage.
This bug did not show up because alloc_skb(X) allocates skb with
extra tailroom, because of added alignments. This could very well
be changed in the future to have deterministic behavior.
Fixes: 10c9ead9f3 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
napi_gro_complete always returned the same value, NET_RX_SUCCESS
And the value was not used anywhere
Signed-off-by: Gyumin Hwang <hkm73560@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each region has an independently configurable number of maximum
snapshots. This information is not reported to userspace, making it not
very discoverable. Fix this by adding a new
DEVLINK_ATTR_REGION_MAX_SNAPSHOST attribute which is used to report this
maximum.
Ex:
$devlink region
pci/0000:af:00.0/nvm-flash: size 10485760 snapshot [] max 1
pci/0000:af:00.0/device-caps: size 4096 snapshot [] max 10
pci/0000:af:00.1/nvm-flash: size 10485760 snapshot [] max 1
pci/0000:af:00.1/device-caps: size 4096 snapshot [] max 10
This information enables users to understand why a new region command
may fail due to having too many existing snapshots.
Reported-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.
In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.
Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.
Fixes: 109f6e39fa ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This socket option provides a mechanism for users to reserve a certain
amount of memory for the socket to use. When this option is set, kernel
charges the user specified amount of memory to memcg, as well as
sk_forward_alloc. This amount of memory is not reclaimable and is
available in sk_forward_alloc for this socket.
With this socket option set, the networking stack spends less cycles
doing forward alloc and reclaim, which should lead to better system
performance, with the cost of an amount of pre-allocated and
unreclaimable memory, even under memory pressure.
Note:
This socket option is only available when memory cgroup is enabled and we
require this reserved memory to be charged to the user's memcg. We hope
this could avoid mis-behaving users to abused this feature to reserve a
large amount on certain sockets and cause unfairness for others.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct dev_addr_list is used for device addresses, unicast addresses
and multicast addresses. The first of those needs special handling
of the main address - netdev->dev_addr points directly the data
of the entry and drivers write to it freely, so we can't maintain
it in the rbtree (for now, at least, to be fixed in net-next).
Current work around sprinkles special handling of the first
address on the list throughout the code but it missed the case
where address is being added. First address will not be visible
during subsequent adds.
Syzbot found a warning where unicast addresses are modified
without holding the rtnl lock, tl;dr is that team generates
the same modification multiple times, not necessarily when
right locks are held.
In the repro we have:
macvlan -> team -> veth
macvlan adds a unicast address to the team. Team then pushes
that address down to its memebers (veths). Next something unrelated
makes team sync member addrs again, and because of the bug
the addr entries get duplicated in the veths. macvlan gets
removed, removes its addr from team which removes only one
of the duplicated addresses from veths. This removal is done
under rtnl. Next syzbot uses iptables to add a multicast addr
to team (which does not hold rtnl lock). Team syncs veth addrs,
but because veths' unicast list still has the duplicate it will
also get sync, even though this update is intended for mc addresses.
Again, uc address updates need rtnl lock, boom.
Reported-by: syzbot+7a2ab2cdc14d134de553@syzkaller.appspotmail.com
Fixes: 406f42fa0d ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following flower filter fails to match non-PPP_IP{V6} packets
wrapped in PPP_SES protocol:
tc filter add dev eth0 ingress protocol ppp_ses flower \
action simple sdata hi64
The reason is that proto local variable is being set even when
FLOW_DISSECT_RET_OUT_BAD status is returned.
The fix is to avoid setting proto variable if the PPP protocol is unknown.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink core code notified users about add/remove objects without
relation if this object can be accessible or not. In this patch we unify
such user visible notifications in one place.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3765996e4f ("napi: fix race inside napi_enable") fixed
an ordering bug in napi_enable() and made the napi_enable() diverge
from napi_disable(). The state transitions done on disable are
not symmetric to enable.
There is no known bug in napi_disable() this is just refactoring.
Eric suggests we can also replace msleep(1) with a more opportunistic
usleep_range().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need in extra one line functions to call relevant
functions only once.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no in-kernel users for the devlink port parameters API,
so let's remove it.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mptcp/protocol.c
977d293e23 ("mptcp: ensure tx skbs always have the MPTCP ext")
efe686ffce ("mptcp: ensure tx skbs always have the MPTCP ext")
same patch merged in both trees, keep net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid to call ksize again in __build_skb_around by passing
the result of data ksize to __build_skb_around
nginx stress test shows this change can reduce ksize cpu usage,
and give a little performance boost
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink_register() can't fail and always returns success, but all drivers
are obligated to check returned status anyway. This adds a lot of boilerplate
code to handle impossible flow.
Make devlink_register() void and simplify the drivers that use that
API call.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process will cause napi.state to contain NAPI_STATE_SCHED and
not in the poll_list, which will cause napi_disable() to get stuck.
The prefix "NAPI_STATE_" is removed in the figure below, and
NAPI_STATE_HASHED is ignored in napi.state.
CPU0 | CPU1 | napi.state
===============================================================================
napi_disable() | | SCHED | NPSVC
napi_enable() | |
{ | |
smp_mb__before_atomic(); | |
clear_bit(SCHED, &n->state); | | NPSVC
| napi_schedule_prep() | SCHED | NPSVC
| napi_poll() |
| napi_complete_done() |
| { |
| if (n->state & (NPSVC | | (1)
| _BUSY_POLL))) |
| return false; |
| ................ |
| } | SCHED | NPSVC
| |
clear_bit(NPSVC, &n->state); | | SCHED
} | |
| |
napi_schedule_prep() | | SCHED | MISSED (2)
(1) Here return direct. Because of NAPI_STATE_NPSVC exists.
(2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list
Since NAPI_STATE_SCHED already exists and napi is not in the
sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always
exist.
1. This will cause this queue to no longer receive packets.
2. If you encounter napi_disable under the protection of rtnl_lock, it
will cause the entire rtnl_lock to be locked, affecting the overall
system.
This patch uses cmpxchg to implement napi_enable(), which ensures that
there will be no race due to the separation of clear two bits.
Fixes: 2d8bff1269 ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It no need barrier when assigning a NULL value to an RCU protected
pointer. So use RCU_INIT_POINTER() instead for more fast.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the
sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It
is just lockdep wise equivalent. In fact it's an open coded trivial mutex
implementation with some interesting features.
sock::sk_lock.slock is a regular spinlock protecting the 'mutex'
representation sock::sk_lock.owned which is a plain boolean. If 'owned' is
true, then some other task holds the 'mutex', otherwise it is uncontended.
As this locking construct is obviously endangered by lock ordering issues as
any other locking primitive it got lockdep annotated via a dedicated
dependency map sock::sk_lock.dep_map which has to be updated at the lock
and unlock sites.
lock_sock_nested() is a straight forward 'mutex' lock operation:
might_sleep();
spin_lock_bh(sock::sk_lock.slock)
while (!try_lock(sock::sk_lock.owned)) {
spin_unlock_bh(sock::sk_lock.slock);
wait_for_release();
spin_lock_bh(sock::sk_lock.slock);
}
The lockdep annotation for sock::sk_lock.owned is for unknown reasons
_after_ the lock has been acquired, i.e. after the code block above and
after releasing sock::sk_lock.slock, but inside the bottom halves disabled
region:
spin_unlock(sock::sk_lock.slock);
mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
local_bh_enable();
The placement after the unlock is obvious because otherwise the
mutex_acquire() would nest into the spin lock held region.
But that's from the lockdep perspective still the wrong place:
1) The mutex_acquire() is issued _after_ the successful acquisition which
is pointless because in a dead lock scenario this point is never
reached which means that if the deadlock is the first instance of
exposing the wrong lock order lockdep does not have a chance to detect
it.
2) It only works because lockdep is rather lax on the context from which
the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves
and therefore non-preemptible region is obviously invalid, except for a
trylock which is clearly not the case here.
This 'works' stops working on RT enabled kernels where the bottom halves
serialization is done via a local lock, which exposes this misplacement
because the 'mutex' and the local lock nest the wrong way around and
lockdep complains rightfully about a lock inversion.
The placement is wrong since the initial commit a5b5bb9a05 ("[PATCH]
lockdep: annotate sk_locks") which introduced this.
Fix it by moving the mutex_acquire() in front of the actual lock
acquisition, which is what the regular mutex_lock() operation does as well.
lock_sock_fast() is not that straight forward. It looks at the first glance
like a convoluted trylock operation:
spin_lock_bh(sock::sk_lock.slock)
if (!sock::sk_lock.owned)
return false;
while (!try_lock(sock::sk_lock.owned)) {
spin_unlock_bh(sock::sk_lock.slock);
wait_for_release();
spin_lock_bh(sock::sk_lock.slock);
}
spin_unlock(sock::sk_lock.slock);
mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
local_bh_enable();
return true;
But that's not the case: lock_sock_fast() is an interesting optimization
for short critical sections which can run with bottom halves disabled and
sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in
the non contended case by preventing other lockers to acquire
sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which
in turn avoids the overhead of doing the heavy processing in release_sock()
including waking up wait queue waiters.
In the contended case, i.e. when sock::sk_lock.owned == true the behavior
is the same as lock_sock_nested().
Semantically this shortcut means, that the task acquired the 'mutex' even
if it does not touch the sock::sk_lock.owned field in the non-contended
case. Not telling lockdep about this shortcut acquisition is hiding
potential lock ordering violations in the fast path.
As a consequence the same reasoning as for the above lock_sock_nested()
case vs. the placement of the lockdep annotation applies.
The current placement of the lockdep annotation was just copied from
the original lock_sock(), now renamed to lock_sock_nested(),
implementation.
Fix this by moving the mutex_acquire() in front of the actual lock
acquisition and adding the corresponding mutex_release() into
unlock_sock_fast(). Also document the fast path return case with a comment.
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The key_domain member in struct net only exists if we define CONFIG_KEYS.
So we should add the define when we used key_domain.
Fixes: 9b24261051 ("keys: Network namespace domain tag")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-09-17
We've added 63 non-merge commits during the last 12 day(s) which contain
a total of 65 files changed, 2653 insertions(+), 751 deletions(-).
The main changes are:
1) Streamline internal BPF program sections handling and
bpf_program__set_attach_target() in libbpf, from Andrii.
2) Add support for new btf kind BTF_KIND_TAG, from Yonghong.
3) Introduce bpf_get_branch_snapshot() to capture LBR, from Song.
4) IMUL optimization for x86-64 JIT, from Jie.
5) xsk selftest improvements, from Magnus.
6) Introduce legacy kprobe events support in libbpf, from Rafael.
7) Access hw timestamp through BPF's __sk_buff, from Vadim.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits)
selftests/bpf: Fix a few compiler warnings
libbpf: Constify all high-level program attach APIs
libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7
selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API
libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target()
libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs
selftests/bpf: Stop using relaxed_core_relocs which has no effect
libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id()
bpf: Update bpf_get_smp_processor_id() documentation
libbpf: Add sphinx code documentation comments
selftests/bpf: Skip btf_tag test if btf_tag attribute not supported
docs/bpf: Add documentation for BTF_KIND_TAG
selftests/bpf: Add a test with a bpf program with btf_tag attributes
selftests/bpf: Test BTF_KIND_TAG for deduplication
selftests/bpf: Add BTF_KIND_TAG unit tests
selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format
selftests/bpf: Test libbpf API function btf__add_tag()
bpftool: Add support for BTF_KIND_TAG
libbpf: Add support for BTF_KIND_TAG
libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag
...
====================
Link: https://lore.kernel.org/r/20210917173738.3397064-1-ast@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink core exported generously the functions calls that were used
by netdevsim tests or not used at all.
Delete such APIs with one exception - devlink_alloc_ns(). That function
should be spared from deleting because it is a special form of devlink_alloc()
needed for the netdevsim.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need in specific devlink_param_*publish(), because same
output can be achieved by using devlink_params_*publish() in correct
places.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mq / mqprio make the default child qdiscs visible. They only do
so for the qdiscs which are within real_num_tx_queues when the
device is registered. Depending on order of calls in the driver,
or if user space changes config via ethtool -L the number of
qdiscs visible under tc qdisc show will differ from the number
of queues. This is confusing to users and potentially to system
configuration scripts which try to make sure qdiscs have the
right parameters.
Add a new Qdisc_ops callback and make relevant qdiscs TTRT.
Note that this uncovers the "shortcut" created by
commit 1f27cde313 ("net: sched: use pfifo_fast for non real queues")
The default child qdiscs beyond initial real_num_tx are always
pfifo_fast, no matter what the sysfs setting is. Fixing this
gets a little tricky because we'd need to keep a reference
on whatever the default qdisc was at the time of creation.
In practice this is likely an non-issue the qdiscs likely have
to be configured to non-default settings, so whatever user space
is doing such configuration can replace the pfifos... now that
it will see them.
Reported-by: Matthew Massey <matthewmassey@fb.com>
Reviewed-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The __alloc_frag_align() is short, and only called by two functions,
so inline page_frag_alloc_align() for reduce the overhead of calls.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-14
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 13 day(s) which contain
a total of 18 files changed, 334 insertions(+), 193 deletions(-).
The main changes are:
1) Fix mmap_lock lockdep splat in BPF stack map's build_id lookup, from Yonghong Song.
2) Fix BPF cgroup v2 program bypass upon net_cls/prio activation, from Daniel Borkmann.
3) Fix kvcalloc() BTF line info splat on oversized allocation attempts, from Bixuan Cui.
4) Fix BPF selftest build of task_pt_regs test for arm64/s390, from Jean-Philippe Brucker.
5) Fix BPF's disasm.{c,h} to dual-license so that it is aligned with bpftool given the former
is a build dependency for the latter, from Daniel Borkmann with ACKs from contributors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix cgroup v1 interference when non-root cgroup v2 BPF programs are used.
Back in the days, commit bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
embedded per-socket cgroup information into sock->sk_cgrp_data and in order
to save 8 bytes in struct sock made both mutually exclusive, that is, when
cgroup v1 socket tagging (e.g. net_cls/net_prio) is used, then cgroup v2
falls back to the root cgroup in sock_cgroup_ptr() (&cgrp_dfl_root.cgrp).
The assumption made was "there is no reason to mix the two and this is in line
with how legacy and v2 compatibility is handled" as stated in bd1060a1d6.
However, with Kubernetes more widely supporting cgroups v2 as well nowadays,
this assumption no longer holds, and the possibility of the v1/v2 mixed mode
with the v2 root fallback being hit becomes a real security issue.
Many of the cgroup v2 BPF programs are also used for policy enforcement, just
to pick _one_ example, that is, to programmatically deny socket related system
calls like connect(2) or bind(2). A v2 root fallback would implicitly cause
a policy bypass for the affected Pods.
In production environments, we have recently seen this case due to various
circumstances: i) a different 3rd party agent and/or ii) a container runtime
such as [0] in the user's environment configuring legacy cgroup v1 net_cls
tags, which triggered implicitly mentioned root fallback. Another case is
Kubernetes projects like kind [1] which create Kubernetes nodes in a container
and also add cgroup namespaces to the mix, meaning programs which are attached
to the cgroup v2 root of the cgroup namespace get attached to a non-root
cgroup v2 path from init namespace point of view. And the latter's root is
out of reach for agents on a kind Kubernetes node to configure. Meaning, any
entity on the node setting cgroup v1 net_cls tag will trigger the bypass
despite cgroup v2 BPF programs attached to the namespace root.
Generally, this mutual exclusiveness does not hold anymore in today's user
environments and makes cgroup v2 usage from BPF side fragile and unreliable.
This fix adds proper struct cgroup pointer for the cgroup v2 case to struct
sock_cgroup_data in order to address these issues; this implicitly also fixes
the tradeoffs being made back then with regards to races and refcount leaks
as stated in bd1060a1d6, and removes the fallback, so that cgroup v2 BPF
programs always operate as expected.
[0] https://github.com/nestybox/sysbox/
[1] https://kind.sigs.k8s.io/
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20210913230759.2313-1-daniel@iogearbox.net
BPF programs may want to know hardware timestamps if NIC supports
such timestamping.
Expose this data as hwtstamp field of __sk_buff the same way as
gso_segs/gso_size. This field could be accessed from the same
programs as tstamp field, but it's read-only field. Explicit test
to deny access to padding data is added to bpf_skb_is_valid_access.
Also update BPF_PROG_TEST_RUN tests of the feature.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210909220409.8804-2-vfedorenko@novek.ru
There is a statement that is indented one character too deeply,
clean this up.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pktgen_thread_worker() no longer needs wait variable, delete it.
Fixes: ef87979c27 ("pktgen: better scheduler friendliness")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Clean up and consolidate ct ecache infrastructure by merging ct and
expect notifiers, from Florian Westphal.
2) Missing counters and timestamp in nfnetlink_queue and _log conntrack
information.
3) Missing error check for xt_register_template() in iptables mangle,
as a incremental fix for the previous pull request, also from
Florian Westphal.
4) Add netfilter hooks for the SRv6 lightweigh tunnel driver, from
Ryoga Sato. The hooks are enabled via nf_hooks_lwtunnel sysctl
to make sure existing netfilter rulesets do not break. There is
a static key to disable the hooks by default.
The pktgen_bench_xmit_mode_netif_receive.sh shows no noticeable
impact in the seg6_input path for non-netfilter users: similar
numbers with and without this patch.
This is a sample of the perf report output:
11.67% kpktgend_0 [ipv6] [k] ipv6_get_saddr_eval
7.89% kpktgend_0 [ipv6] [k] __ipv6_addr_label
7.52% kpktgend_0 [ipv6] [k] __ipv6_dev_get_saddr
6.63% kpktgend_0 [kernel.vmlinux] [k] asm_exc_nmi
4.74% kpktgend_0 [ipv6] [k] fib6_node_lookup_1
3.48% kpktgend_0 [kernel.vmlinux] [k] pskb_expand_head
3.33% kpktgend_0 [ipv6] [k] ip6_rcv_core.isra.29
3.33% kpktgend_0 [ipv6] [k] seg6_do_srh_encap
2.53% kpktgend_0 [ipv6] [k] ipv6_dev_get_saddr
2.45% kpktgend_0 [ipv6] [k] fib6_table_lookup
2.24% kpktgend_0 [kernel.vmlinux] [k] ___cache_free
2.16% kpktgend_0 [ipv6] [k] ip6_pol_route
2.11% kpktgend_0 [kernel.vmlinux] [k] __ipv6_addr_type
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces netfilter hooks for solving the problem that
conntrack couldn't record both inner flows and outer flows.
This patch also introduces a new sysctl toggle for enabling lightweight
tunnel netfilter hooks.
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently when device is moved between network namespaces using
RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID,
IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and
target namespace already has device with same name, userspace will get
EINVAL what is confusing and makes debugging harder.
Fix it so that userspace gets more appropriate EEXIST instead what makes
debugging much easier.
Before:
# ./ifname.sh
+ ip netns add ns0
+ ip netns exec ns0 ip link add l0 type dummy
+ ip netns exec ns0 ip link show l0
8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff
+ ip link add l0 type dummy
+ ip link show l0
10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff
+ ip link set l0 netns ns0
RTNETLINK answers: Invalid argument
After:
# ./ifname.sh
+ ip netns add ns0
+ ip netns exec ns0 ip link add l0 type dummy
+ ip netns exec ns0 ip link show l0
8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff
+ ip link add l0 type dummy
+ ip link show l0
10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff
+ ip link set l0 netns ns0
RTNETLINK answers: File exists
The problem is that do_setlink() passes its `char *ifname` argument,
that it gets from a caller, to __dev_change_net_namespace() as is (as
`const char *pat`), but semantics of ifname and pat can be different.
For example, __rtnl_newlink() does this:
net/core/rtnetlink.c
3270 char ifname[IFNAMSIZ];
...
3286 if (tb[IFLA_IFNAME])
3287 nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
3288 else
3289 ifname[0] = '\0';
...
3364 if (dev) {
...
3394 return do_setlink(skb, dev, ifm, extack, tb, ifname, status);
3395 }
, i.e. do_setlink() gets ifname pointer that is always valid no matter
if user specified IFLA_IFNAME or not and then do_setlink() passes this
ifname pointer as is to __dev_change_net_namespace() as pat argument.
But the pat (pattern) in __dev_change_net_namespace() is used as:
net/core/dev.c
11198 err = -EEXIST;
11199 if (__dev_get_by_name(net, dev->name)) {
11200 /* We get here if we can't use the current device name */
11201 if (!pat)
11202 goto out;
11203 err = dev_get_valid_name(net, dev, pat);
11204 if (err < 0)
11205 goto out;
11206 }
As the result the `goto out` path on line 11202 is neven taken and
instead of returning EEXIST defined on line 11198,
__dev_change_net_namespace() returns an error from dev_get_valid_name()
and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier.
Fixes: d8a5ec6727 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both SKB_FRAG_PAGE_ORDER are defined to the same value in
net/core/sock.c and drivers/vhost/net.c.
Move the SKB_FRAG_PAGE_ORDER definition to net/core/sock.h,
as both net/core/sock.c and drivers/vhost/net.c include it,
and it seems a reasonable file to put the macro.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows the bpf-tcp-cc to call bpf_setsockopt. One use
case is to allow a bpf-tcp-cc switching to another cc during init().
For example, when the tcp flow is not ecn ready, the bpf_dctcp
can switch to another cc by calling setsockopt(TCP_CONGESTION).
During setsockopt(TCP_CONGESTION), the new tcp-cc's init() will be
called and this could cause a recursion but it is stopped by the
current trampoline's logic (in the prog->active counter).
While retiring a bpf-tcp-cc (e.g. in tcp_v[46]_destroy_sock()),
the tcp stack calls bpf-tcp-cc's release(). To avoid the retiring
bpf-tcp-cc making further changes to the sk, bpf_setsockopt is not
available to the bpf-tcp-cc's release(). This will avoid release()
making setsockopt() call that will potentially allocate new resources.
Although the bpf-tcp-cc already has a more powerful way to read tcp_sock
from the PTR_TO_BTF_ID, it is usually expected that bpf_getsockopt and
bpf_setsockopt are available together. Thus, bpf_getsockopt() is also
added to all tcp_congestion_ops except release().
When the old bpf-tcp-cc is calling setsockopt(TCP_CONGESTION)
to switch to a new cc, the old bpf-tcp-cc will be released by
bpf_struct_ops_put(). Thus, this patch also puts the bpf_struct_ops_map
after a rcu grace period because the trampoline's image cannot be freed
while the old bpf-tcp-cc is still running.
bpf-tcp-cc can only access icsk_ca_priv as SCALAR. All kernel's
tcp-cc is also accessing the icsk_ca_priv as SCALAR. The size
of icsk_ca_priv has already been raised a few times to avoid
extra kmalloc and memory referencing. The only exception is the
kernel's tcp_cdg.c that stores a kmalloc()-ed pointer in icsk_ca_priv.
To avoid the old bpf-tcp-cc accidentally overriding this tcp_cdg's pointer
value stored in icsk_ca_priv after switching and without over-complicating
the bpf's verifier for this one exception in tcp_cdg, this patch does not
allow switching to tcp_cdg. If there is a need, bpf_tcp_cdg can be
implemented and then use the bpf_sk_storage as the extended storage.
bpf_sk_setsockopt proto has only been recently added and used
in bpf-sockopt and bpf-iter-tcp, so impose the tcp_cdg limitation in the
same proto instead of adding a new proto specifically for bpf-tcp-cc.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173007.3976921-1-kafai@fb.com
The source of most of the slow down is the `dev_addr_lists.c` module,
which mainatins a linked list of HW addresses.
When using IPv6, this list grows for each IPv6 address added on a
VLAN, since each IPv6 address has a multicast HW address associated with
it.
When performing any modification to the involved links, this list is
traversed many times, often for nothing, all while holding the RTNL
lock.
Instead, this patch adds an auxilliary rbtree which cuts down
traversal time significantly.
Performance can be seen with the following script:
#!/bin/bash
ip netns del test || true 2>/dev/null
ip netns add test
echo 1 | ip netns exec test tee /proc/sys/net/ipv6/conf/all/keep_addr_on_down > /dev/null
set -e
ip -n test link add foo type veth peer name bar
ip -n test link add b1 type bond
ip -n test link add florp type vrf table 10
ip -n test link set bar master b1
ip -n test link set foo up
ip -n test link set bar up
ip -n test link set b1 up
ip -n test link set florp up
VLAN_COUNT=1500
BASE_DEV=b1
echo Creating vlans
ip netns exec test time -p bash -c "for i in \$(seq 1 $VLAN_COUNT);
do ip -n test link add link $BASE_DEV name foo.\$i type vlan id \$i; done"
echo Bringing them up
ip netns exec test time -p bash -c "for i in \$(seq 1 $VLAN_COUNT);
do ip -n test link set foo.\$i up; done"
echo Assiging IPv6 Addresses
ip netns exec test time -p bash -c "for i in \$(seq 1 $VLAN_COUNT);
do ip -n test address add dev foo.\$i 2000::\$i/64; done"
echo Attaching to VRF
ip netns exec test time -p bash -c "for i in \$(seq 1 $VLAN_COUNT);
do ip -n test link set foo.\$i master florp; done"
On an Intel(R) Xeon(R) CPU E5-2650 v3 @ 2.30GHz machine, the performance
before the patch is (truncated):
Creating vlans
real 108.35
Bringing them up
real 4.96
Assiging IPv6 Addresses
real 19.22
Attaching to VRF
real 458.84
After the patch:
Creating vlans
real 5.59
Bringing them up
real 5.07
Assiging IPv6 Addresses
real 5.64
Attaching to VRF
real 25.37
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Lu Wei <luwei32@huawei.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'd like to be able to identify netns from sk_msg hooks
to accelerate local process communication form different netns.
Signed-off-by: Xu Liu <liuxu623@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820071712.52852-2-liuxu623@gmail.com
There is no need to synchronize the account updating, so
use the relaxed atomic to avoid some memory barrier in the
data path.
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when creating an ingress qdisc on an indirect device before
the driver registered for callbacks, the driver will not have a chance
to register its filter configuration callbacks.
To fix that, modify the code such that it keeps track of all the ingress
qdiscs that call flow_indr_dev_setup_offload(). When a driver calls
flow_indr_dev_register(), go through the list of tracked ingress qdiscs
and call the driver callback entry point so as to give it a chance to
register its callback.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rcu field is not used. Remove it.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'd like to be able to identify netns from sockops hooks to
accelerate local process communication form different netns.
Signed-off-by: Xu Liu <liuxu623@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210818105820.91894-2-liuxu623@gmail.com
Currently, the declaration of fill_imix_distribution() is dependent
on CONFIG_XFRM. This is incorrect.
Move fill_imix_distribution() declaration out of #ifndef CONFIG_XFRM
block.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add gfp_t mask as an input parameter to mem_cgroup_charge_skmem(),
to give more control to the networking stack and enable it to change
memcg charging behavior. In the future, the networking stack may decide
to avoid oom-kills when fallbacks are more appropriate.
One behavior change in mem_cgroup_charge_skmem() by this patch is to
avoid force charging by default and let the caller decide when and if
force charging is needed through the presence or absence of
__GFP_NOFAIL.
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is only one caller for ops_free(), so inline it.
Separate net_drop_ns() and net_free(), so the net_free()
can be called directly.
Add free_exit_list() helper function for free net_exit_list.
====================
v2:
- v1 does not apply, rebase it.
====================
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add seq_puts() statement for dev_mcast, make it more readable.
As also, keep vertical alignment for {dev, ptype, dev_mcast} that
under /proc/net.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, sockmap for AF_UNIX protocol only supports
dgram type. This patch add unix stream type support, which
is similar to unix_dgram_proto. To support sockmap, dgram
and stream cannot share the same unix_proto anymore, because
they have different implementations, such as unhash for stream
type (which will remove closed or disconnected sockets from the map),
so rename unix_proto to unix_dgram_proto and add a new
unix_stream_proto.
Also implement stream related sockmap functions.
And add dgram key words to those dgram specific functions.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-3-jiang.wang@bytedance.com
Turn BPF_PROG_RUN into a proper always inlined function. No functional and
performance changes are intended, but it makes it much easier to understand
what's going on with how BPF programs are actually get executed. It's more
obvious what types and callbacks are expected. Also extra () around input
parameters can be dropped, as well as `__` variable prefixes intended to avoid
naming collisions, which makes the code simpler to read and write.
This refactoring also highlighted one extra issue. BPF_PROG_RUN is both
a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning
BPF_PROG_RUN into a function causes naming conflict compilation error. So
rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to
bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of
BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org
The { 0 } doesn't clear all fields in the struct, but tells to the
compiler to set all fields to zero and doesn't touch any sub-fields
if they exists.
The {} is an empty initialiser that instructs to fully initialize whole
struct including sub-fields, which is error-prone for future
devlink_flash_notify extensions.
Fixes: 6700acc5f1 ("devlink: collect flash notify params into a struct")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can use xarray instead of linearly organized linked lists for the
devlink instances. This will let us revise the locking scheme in favour
of internal xarray locking that protects database.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct devlink itself is protected by internal lock and doesn't
need global lock during operation. That global lock is used to protect
addition/removal new devlink instances from the global list in use by
all devlink consumers in the system.
The future conversion of linked list to be xarray will allow us to
actually delete that lock, but first we need to count all struct devlink
users.
The reference counting provides us a way to ensure that no new user
space commands success to grab devlink instance which is going to be
destroyed makes it is safe to access it without lock.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devlink objects are accessible only after they were registered and
have valid devlink_*->devlink pointers.
Remove that check and simplify respective fill functions as an outcome
of such change.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink_pernet_pre_exit() will be called if net namespace exits.
That routine is relevant for devlink instances that were assigned to
that namespaces first. This assignment is possible only with the following
command: "devlink reload DEV netns ...", which already checks reload support.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bps for imix mode is calculated by:
sum(imix_entry.size) / time_elapsed
The actual counts of each imix_entry are displayed under the
"Current:" section of the interface output in the following format:
imix_size_counts: size_1,count_1 size_2,count_2 ... size_n,count_n
Example (count = 200000):
imix_weights: 256,1 859,3 205,2
imix_size_counts: 256,32082 859,99796 205,68122
Result: OK: 17992362(c17964678+d27684) usec, 200000 (859byte,0frags)
11115pps 47Mb/sec (47977140bps) errors: 0
Summary of changes:
Calculate bps based on imix counters when in IMIX mode.
Add output for IMIX counters.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to represent the distribution of imix packet sizes, a
pre-computed data structure is used. It features 100 (IMIX_PRECISION)
"bins". Contiguous ranges of these bins represent the respective
packet size of each imix entry. This is done to avoid the overhead of
selecting the correct imix packet size based on the corresponding weights.
Example:
imix_weights 40,7 576,4 1500,1
total_weight = 7 + 4 + 1 = 12
pkt_size 40 occurs 7/total_weight = 58% of the time
pkt_size 576 occurs 4/total_weight = 33% of the time
pkt_size 1500 occurs 1/total_weight = 9% of the time
We generate a random number between 0-100 and select the corresponding
packet size based on the specified weights.
Eg. random number = 358723895 % 100 = 65
Selects the packet size corresponding to index:65 in the pre-computed
imix_distribution array.
An example of the pre-computed array is below:
The imix_distribution will look like the following:
0 -> 0 (index of imix_entry.size == 40)
1 -> 0 (index of imix_entry.size == 40)
2 -> 0 (index of imix_entry.size == 40)
[...] -> 0 (index of imix_entry.size == 40)
57 -> 0 (index of imix_entry.size == 40)
58 -> 1 (index of imix_entry.size == 576)
[...] -> 1 (index of imix_entry.size == 576)
90 -> 1 (index of imix_entry.size == 576)
91 -> 2 (index of imix_entry.size == 1500)
[...] -> 2 (index of imix_entry.size == 1500)
99 -> 2 (index of imix_entry.size == 1500)
Create and use "bin" representation of the imix distribution.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds "imix_weights" command for specifying internet mix distribution.
The command is in this format:
"imix_weights size_1,weight_1 size_2,weight_2 ... size_n,weight_n"
where the probability that packet size_i is picked is:
weight_i / (weight_1 + weight_2 + .. + weight_n)
The user may provide up to 100 imix entries (size_i,weight_i) in this
command.
The user specified imix entries will be displayed in the "Params"
section of the interface output.
Values for clone_skb > 0 is not supported in IMIX mode.
Summary of changes:
Add flag for enabling internet mix mode.
Add command (imix_weights) for internet mix input.
Return -ENOTSUPP when clone_skb > 0 in IMIX mode.
Display imix_weights in Params.
Create data structures to store imix entries and distribution.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).
It happens that the following happens:
- the network driver (e1000e here) prepares to suspend, calls e1000e_down()
which calls netif_carrier_off() to signal that the link is going down.
- netif_carrier_off() adds a link_watch event to the list of events for
this device
- the device is completely stopped.
- the machine suspends
- the cable is unplugged and the machine brought to another location
- the machine is resumed
- the queued linkwatch events are processed for the device
- the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
are silently dropped
- the device is resumed with its link down
- the upper VLAN and bond interfaces are never notified that the link had
been turned down and remain up
- the only way to provoke a change is to physically connect the machine
to a port and possibly unplug it.
The state after resume looks like this:
$ ip -br li | egrep 'bond|eth'
bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>
Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.
The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f69 ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.
Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.
Fixes: 124eee3f69 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable drivers to publish/unpublish individual parameter.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently device configuration parameters can be registered as an array.
Due to this a constant array must be registered. A single driver
supporting multiple devices each with different device capabilities end
up registering all parameters even if it doesn't support it.
One possible workaround a driver can do is, it registers multiple single
entry arrays to overcome such limitation.
Better is to provide a API that enables driver to register/unregister a
single parameter. This also further helps in two ways.
(1) to reduce the memory of devlink_param_entry by avoiding in registering
parameters which are not supported by the device.
(2) avoid generating multiple parameter add, delete, publish, unpublish,
init value notifications for such unsupported parameters
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create and use a helper function for one parameter registration.
Subsequent patch also will reuse this for driver facing routine to
register a single parameter.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new device generic parameter to enable/disable creation of
VDPA net auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_vnet value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
VDPA net functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new device generic parameter to enable/disable creation of
RDMA auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_rdma value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
RDMA functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new device generic parameter to enable/disable creation of
Ethernet auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_eth value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
Ethernet functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there's support for filtering neighbours/links for interfaces
which have a specific master device (using the IFLA_MASTER/NDA_MASTER
attributes).
This patch adds support for filtering interfaces/neighbours dump for
interfaces that *don't* have a master.
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210810090658.2778960-1-lschlesinger@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2021-08-10
We've added 31 non-merge commits during the last 8 day(s) which contain
a total of 28 files changed, 3644 insertions(+), 519 deletions(-).
1) Native XDP support for bonding driver & related BPF selftests, from Jussi Maki.
2) Large batch of new BPF JIT tests for test_bpf.ko that came out as a result from
32-bit MIPS JIT development, from Johan Almbladh.
3) Rewrite of netcnt BPF selftest and merge into test_progs, from Stanislav Fomichev.
4) Fix XDP bpf_prog_test_run infra after net to net-next merge, from Andrii Nakryiko.
5) Follow-up fix in unix_bpf_update_proto() to enforce socket type, from Cong Wang.
6) Fix bpf-iter-tcp4 selftest to print the correct dest IP, from Jose Blanquicet.
7) Various misc BPF XDP sample improvements, from Niklas Söderlund, Matthew Cover,
and Muhammad Falak R Wani.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
bpf, tests: Add tail call test suite
bpf, tests: Add tests for BPF_CMPXCHG
bpf, tests: Add tests for atomic operations
bpf, tests: Add test for 32-bit context pointer argument passing
bpf, tests: Add branch conversion JIT test
bpf, tests: Add word-order tests for load/store of double words
bpf, tests: Add tests for ALU operations implemented with function calls
bpf, tests: Add more ALU64 BPF_MUL tests
bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64
bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH
bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations
bpf, tests: Fix typos in test case descriptions
bpf, tests: Add BPF_MOV tests for zero and sign extension
bpf, tests: Add BPF_JMP32 test cases
samples, bpf: Add an explict comment to handle nested vlan tagging.
selftests/bpf: Add tests for XDP bonding
selftests/bpf: Fix xdp_tx.c prog section name
net, core: Allow netdev_lower_get_next_private_rcu in bh context
bpf, devmap: Exclude XDP broadcast to master device
net, bonding: Add XDP support to the bonding driver
...
====================
Link: https://lore.kernel.org/r/20210810130038.16927-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently page pool only support page recycling when there
is only one user of the page, and the split page reusing
implemented in the most driver can not use the page pool as
bing-pong way of reusing requires the multi user support in
page pool.
Those reusing or recycling has below limitations:
1. page from page pool can only be used be one user in order
for the page recycling to happen.
2. Bing-pong way of reusing in most driver does not support
multi desc using different part of the same page in order
to save memory.
So add multi-users support and frag page recycling in page
pool to overcome the above limitation.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For 32 bit systems with 64 bit dma, dma_addr[1] is used to
store the upper 32 bit dma addr, those system should be rare
those days.
For normal system, the dma_addr[1] in 'struct page' is not
used, so we can reuse dma_addr[1] for storing frag count,
which means how many frags this page might be splited to.
In order to simplify the page frag support in the page pool,
the PAGE_POOL_DMA_USE_PP_FRAG_COUNT macro is added to indicate
the 32 bit systems with 64 bit dma, and the page frag support
in page pool is disabled for such system.
The newly added page_pool_set_frag_count() is called to reserve
the maximum frag count before any page frag is passed to the
user. The page_pool_atomic_sub_frag_count_return() is called
when user is done with the page frag.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, page->pp is cleared and set everytime the page
is recycled, which is unnecessary.
So only set the page->pp when the page is added to the page
pool and only clear it when the page is released from the
page pool.
This is also a preparation to support allocating frag page
in page pool.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the XDP bonding slave lookup to work in the NAPI poll context in which
the redudant rcu_read_lock() has been removed we have to follow the same
approach as in 694cea395f ("bpf: Allow RCU-protected lookups to happen
from bh context") and modify the WARN_ON to also check rcu_read_lock_bh_held().
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210731055738.16820-6-joamaki@gmail.com
This adds the ndo_xdp_get_xmit_slave hook for transforming XDP_TX
into XDP_REDIRECT after BPF program run when the ingress device
is a bond slave.
The dev_xdp_prog_count is exposed so that slave devices can be checked
for loaded XDP programs in order to avoid the situation where both
bond master and slave have programs loaded according to xdp_state.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/bpf/20210731055738.16820-3-joamaki@gmail.com
Fix a typo when checking existence of port_type_set function pointer.
Fixes: 82564f6c70 ("devlink: Simplify devlink port API calls")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All kernel devlink implementations call to devlink_alloc() during
initialization routine for specific device which is used later as
a parent device for devlink_register().
Such late device assignment causes to the situation which requires us to
call to device_register() before setting other parameters, but that call
opens devlink to the world and makes accessible for the netlink users.
Any attempt to move devlink_register() to be the last call generates the
following error due to access to the devlink->dev pointer.
[ 8.758862] devlink_nl_param_fill+0x2e8/0xe50
[ 8.760305] devlink_param_notify+0x6d/0x180
[ 8.760435] __devlink_params_register+0x2f1/0x670
[ 8.760558] devlink_params_register+0x1e/0x20
The simple change of API to set devlink device in the devlink_alloc()
instead of devlink_register() fixes all this above and ensures that
prior to call to devlink_register() everything already set.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As mentioned in commit c07aea3ef4 ("mm: add a signature in
struct page"):
"The page->signature field is aliased to page->lru.next and
page->compound_head."
And as the comment in page_is_pfmemalloc():
"lru.next has bit 1 set if the page is allocated from the
pfmemalloc reserves. Callers may simply overwrite it if they
do not need to preserve that information."
The page->signature is OR’ed with PP_SIGNATURE when a page is
allocated in page pool, see __page_pool_alloc_pages_slow(),
and page->signature is checked directly with PP_SIGNATURE in
page_pool_return_skb_page(), which might cause resoure leaking
problem for a page from page pool if bit 1 of lru.next is set
for a pfmemalloc page. What happens here is that the original
pp->signature is OR'ed with PP_SIGNATURE after the allocation
in order to preserve any existing bits(such as the bit 1, used
to indicate a pfmemalloc page), so when those bits are present,
those page is not considered to be from page pool and the DMA
mapping of those pages will be left stale.
As bit 0 is for page->compound_head, So mask both bit 0/1 before
the checking in page_pool_return_skb_page(). And we will return
those pfmemalloc pages back to the page allocator after cleaning
up the DMA mapping.
Fixes: 6a5bcd84e8 ("page_pool: Allow drivers to hint on SKB recycling")
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devlink port already has pointer to the devlink instance and all API
calls that forward these devlink ports to the drivers perform same
"devlink_port->devlink" assignment before actual call.
This patch removes useless parameter and allows us in the future
to create specific devlink_port_ops to manage user space access with
reliable ops assignment.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before commit ad2f99aedf ("net: bridge: move bridge ioctls out of
.ndo_do_ioctl") the bridge ioctl calls were divided in two parts:
one was deviceless called by sock_ioctl and didn't expect rtnl to be held,
the other was with a device called by dev_ifsioc() and expected rtnl to be
held. After the commit above they were united in a single ioctl stub, but
it didn't take care of the locking expectations.
For sock_ioctl now we acquire (1) br_ioctl_mutex, (2) rtnl
and for dev_ifsioc we acquire (1) rtnl, (2) br_ioctl_mutex
The fix is to get a refcnt on the netdev for dev_ifsioc calls and drop rtnl
then to reacquire it in the bridge ioctl stub after br_ioctl_mutex has
been acquired. That will avoid playing locking games and make the rules
straight-forward: we always take br_ioctl_mutex first, and then rtnl.
Reported-by: syzbot+34fe5894623c4ab1b379@syzkaller.appspotmail.com
Fixes: ad2f99aedf ("net: bridge: move bridge ioctls out of .ndo_do_ioctl")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 5e10da5385 ("skbuff: allow 'slow_gro' for skb carring sock
reference") introduces a serious regression at the GRO layer setting
the wrong truesize for stolen-head skbs.
Restore the correct truesize: SKB_DATA_ALIGN(...) instead of
SKB_TRUESIZE(...)
Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Fixes: 5e10da5385 ("skbuff: allow 'slow_gro' for skb carring sock reference")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the netif_receive xmit_mode is set, a line is supposed to set
clone_skb to a default 0 value. This line is made redundant due to a
preceding line that checks if clone_skb is more than zero and returns
-ENOTSUPP.
Overriding clone_skb to 0 does not make any difference to the behavior
because if it was positive we return error. So it can be either 0 or
negative, and in both cases the behavior is the same.
Remove redundant line that sets clone_skb to zero.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags disable automatic socket
buffers adjustment done by kernel (see tcp_fixup_rcvbuf() and
tcp_sndbuf_expand()). If we've just created a new socket this adjustment
is enabled on it, but if one changes the socket buffer size by
setsockopt(SO_{SND,RCV}BUF*) it becomes disabled.
CRIU needs to call setsockopt(SO_{SND,RCV}BUF*) on each socket on
restore as it first needs to increase buffer sizes for packet queues
restore and second it needs to restore back original buffer sizes. So
after CRIU restore all sockets become non-auto-adjustable, which can
decrease network performance of restored applications significantly.
CRIU need to be able to restore sockets with enabled/disabled adjustment
to the same state it was before dump, so let's add special setsockopt
for it.
Let's also export SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags to uAPI so
that using these interface one can reenable automatic socket buffer
adjustment on their sockets.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues()
can fail which breaks drivers trying to implement reconfiguration
in a way that can't leave the device half-broken. In other words
those functions are incompatible with prepare/commit approach.
Luckily setting real number of queues can fail only if the number
is increased, meaning that if we order operations correctly we
can guarantee ending up with either new config (success), or
the old one (on error).
Provide a helper implementing such logic so that drivers don't
have to duplicate it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack arg to validate_linkmsg and validate_link_af callbacks.
If a netlink attribute has a reject_message, use the extended ack
mechanism to carry the message back to user space.
Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is now only used by a handful of old ISA drivers,
and can be moved into the file they already all depend on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Those files under /proc/net/stat/ don't have vertical alignment, it looks
very difficult. Modify the seq_printf statement, keep vertical alignment.
v2:
- Use seq_puts() and seq_printf() correctly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.
Additionally this patch replaces commonly used dereferencing with variables.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like skb_realloc_headroom(), new helper increases headroom of specified skb.
Unlike skb_realloc_headroom(), it does not allocate a new skb if possible;
copies skb->sk on new skb when as needed and frees original skb in case
of failures.
This helps to simplify ip[6]_finish_output2() and a few other similar cases.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Nakryiko says:
====================
bpf-next 2021-07-30
We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).
The main changes are:
1) BTF-guided binary data dumping libbpf API, from Alan.
2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.
3) Ambient BPF run context and cgroup storage cleanup, from Andrii.
4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.
5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.
6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.
7) BPF map pinning improvements in libbpf, from Martynas.
8) Improved module BTF support in libbpf and bpftool, from Quentin.
9) Bpftool cleanups and documentation improvements, from Quentin.
10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.
11) Increased maximum cgroup storage size, from Stanislav.
12) Small fixes and improvements to BPF tests and samples, from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
tools: bpftool: Complete metrics list in "bpftool prog profile" doc
tools: bpftool: Document and add bash completion for -L, -B options
selftests/bpf: Update bpftool's consistency script for checking options
tools: bpftool: Update and synchronise option list in doc and help msg
tools: bpftool: Complete and synchronise attach or map types
selftests/bpf: Check consistency between bpftool source, doc, completion
tools: bpftool: Slightly ease bash completion updates
unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
tools: bpftool: Support dumping split BTF by id
libbpf: Add split BTF support for btf__load_from_kernel_by_id()
tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
tools: Free BTF objects at various locations
libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
libbpf: Rename btf__load() as btf__load_into_kernel()
libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
bpf: Increase supported cgroup storage value size
libbpf: Fix race when pinning maps in parallel
...
====================
Link: https://lore.kernel.org/r/20210730225606.1897330-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need in extra call indirection and check from impossible
flow where someone tries to set namespace without prior call
to devlink_alloc().
Instead of this extra logic and additional EXPORT_SYMBOL, use specialized
devlink allocation function that receives net namespace as an argument.
Such specialized API allows clear view when devlink initialized in wrong
net namespace and/or kernel users don't try to change devlink namespace
under the hood.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If skb_dst_set_noref() is invoked with a NULL dst, the 'slow_gro'
field is cleared, too. That could lead to wrong behavior if
the skb later enters the GRO stage.
Fix the potential issue replacing preserving a non-zero value of
the 'slow_gro' field.
Additionally, fix a comment typo.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 8a886b142b ("sk_buff: track dst status in slow_gro")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/aa42529252dc8bb02bd42e8629427040d1058537.1627662501.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
currently, only 'ingress' and 'clsact ingress' qdiscs store the tc 'chain
id' in the skb extension. However, userspace programs (like ovs) are able
to setup egress rules, and datapath gets confused in case it doesn't find
the 'chain id' for a packet that's "recirculated" by tc.
Change tcf_classify() to have the same semantic as tcf_classify_ingress()
so that a single function can be called in ingress / egress, using the tc
ingress / egress block respectively.
Suggested-by: Alaa Hleilel <alaa@nvidia.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic Kconfig, an initial (empty) af_mctp source object, and
{AF,PF}_MCTP definitions, and the required definitions for a new
protocol type.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change leverages the infrastructure introduced by the previous
patches to allow soft devices passing to the GRO engine owned skbs
without impacting the fast-path.
It's up to the GRO caller ensuring the slow_gro bit validity before
invoking the GRO engine. The new helper skb_prepare_for_gro() is
introduced for that goal.
On slow_gro, skbs are aggregated only with equal sk.
Additionally, skb truesize on GRO recycle and free is correctly
updated so that sk wmem is not changed by the GRO processing.
rfc-> v1:
- fixed bad truesize on dev_gro_receive NAPI_FREE
- use the existing state bit
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patches, at GRO time, skb->slow_gro is
usually 0, unless the packets comes from some H/W offload
slowpath or tunnel.
We can optimize the GRO code assuming !skb->slow_gro is likely.
This remove multiple conditionals in the most common path, at the
price of an additional one when we hit the above "slow-paths".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the previous one, but tracking the
active_extensions field status.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
using same source and destination ip/port for flow hash calculation
within the two directions.
Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both registered flag and devlink pointer are set at the same time
and indicate the same thing - devlink/devlink_port are ready. Instead
of checking ->registered use devlink pointer as an indication.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If backlog handler is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.
sk_psock_backlog()
sk_psock_handle_skb()
skb_psock_skb_ingress()
sk_psock_skb_ingress_enqueue()
sk_psock_queue_msg(psock,msg)
spin_lock(ingress_lock)
sk_psock_zap_ingress()
_sk_psock_purge_ingerss_msg()
_sk_psock_purge_ingress_msg()
-- free ingress_msg list --
spin_unlock(ingress_lock)
spin_lock(ingress_lock)
list_add_tail(msg,ingress_msg) <- entry on list with no one
left to free it.
spin_unlock(ingress_lock)
To fix we only enqueue from backlog if the ENABLED bit is set. The tear
down logic clears the bit with ingress_lock set so we wont enqueue the
msg in the last step.
Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-4-john.fastabend@gmail.com
Its possible if a socket is closed and the receive thread is under memory
pressure it may have cached a skb. We need to ensure these skbs are
free'd along with the normal ingress_skb queue.
Before 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()") tear
down and backlog processing both had sock_lock for the common case of
socket close or unhash. So it was not possible to have both running in
parrallel so all we would need is the kfree in those kernels.
But, latest kernels include the commit 799aa7f98d5e and this requires a
bit more work. Without the ingress_lock guarding reading/writing the
state->skb case its possible the tear down could run before the state
update causing it to leak memory or worse when the backlog reads the state
it could potentially run interleaved with the tear down and we might end up
free'ing the state->skb from tear down side but already have the reference
from backlog side. To resolve such races we wrap accesses in ingress_lock
on both sides serializing tear down and backlog case. In both cases this
only happens after an EAGAIN error case so having an extra lock in place
is likely fine. The normal path will skip the locks.
Note, we check state->skb before grabbing lock. This works because
we can only enqueue with the mutex we hold already. Avoiding a race
on adding state->skb after the check. And if tear down path is running
that is also fine if the tear down path then removes state->skb we
will simply set skb=NULL and the subsequent goto is skipped. This
slight complication avoids locking in normal case.
With this fix we no longer see this warning splat from tcp side on
socket close when we hit the above case with redirect to ingress self.
[224913.935822] WARNING: CPU: 3 PID: 32100 at net/core/stream.c:208 sk_stream_kill_queues+0x212/0x220
[224913.935841] Modules linked in: fuse overlay bpf_preload x86_pkg_temp_thermal intel_uncore wmi_bmof squashfs sch_fq_codel efivarfs ip_tables x_tables uas xhci_pci ixgbe mdio xfrm_algo xhci_hcd wmi
[224913.935897] CPU: 3 PID: 32100 Comm: fgs-bench Tainted: G I 5.14.0-rc1alu+ #181
[224913.935908] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[224913.935914] RIP: 0010:sk_stream_kill_queues+0x212/0x220
[224913.935923] Code: 8b 83 20 02 00 00 85 c0 75 20 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 df e8 2b 11 fe ff eb c3 0f 0b e9 7c ff ff ff 0f 0b eb ce <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 90 0f 1f 44 00 00 41 57 41
[224913.935932] RSP: 0018:ffff88816271fd38 EFLAGS: 00010206
[224913.935941] RAX: 0000000000000ae8 RBX: ffff88815acd5240 RCX: dffffc0000000000
[224913.935948] RDX: 0000000000000003 RSI: 0000000000000ae8 RDI: ffff88815acd5460
[224913.935954] RBP: ffff88815acd5460 R08: ffffffff955c0ae8 R09: fffffbfff2e6f543
[224913.935961] R10: ffffffff9737aa17 R11: fffffbfff2e6f542 R12: ffff88815acd5390
[224913.935967] R13: ffff88815acd5480 R14: ffffffff98d0c080 R15: ffffffff96267500
[224913.935974] FS: 00007f86e6bd1700(0000) GS:ffff888451cc0000(0000) knlGS:0000000000000000
[224913.935981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[224913.935988] CR2: 000000c0008eb000 CR3: 00000001020e0005 CR4: 00000000003706e0
[224913.935994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[224913.936000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[224913.936007] Call Trace:
[224913.936016] inet_csk_destroy_sock+0xba/0x1f0
[224913.936033] __tcp_close+0x620/0x790
[224913.936047] tcp_close+0x20/0x80
[224913.936056] inet_release+0x8f/0xf0
[224913.936070] __sock_release+0x72/0x120
[224913.936083] sock_close+0x14/0x20
Fixes: a136678c0b ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-3-john.fastabend@gmail.com
We don't want strparser to run and pass skbs into skmsg handlers when
the psock is null. We just sk_drop them in this case. When removing
a live socket from map it means extra drops that we do not need to
incur. Move the zap below strparser close to avoid this condition.
This way we stop the stream parser first stopping it from processing
packets and then delete the psock.
Fixes: a136678c0b ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-2-john.fastabend@gmail.com
All other user triggered operations are gone from ndo_ioctl, so move
the SIOCBOND family into a custom operation as well.
The .ndo_ioctl() helper is no longer called by the dev_ioctl.c code now,
but there are still a few definitions in obsolete wireless drivers as well
as the appletalk and ieee802154 layers to call SIOCSIFADDR/SIOCGIFADDR
helpers from inside the kernel.
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Working towards obsoleting the .ndo_do_ioctl operation entirely,
stop passing the SIOCBRADDIF/SIOCBRDELIF device ioctl commands
into this callback.
My first attempt was to add another ndo_siocbr() callback, but
as there is only a single driver that takes these commands and
there is already a hook mechanism to call directly into this
driver, extend this hook instead, and use it for both the
deviceless and the device specific ioctl commands.
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers that use SIOCDEVPRIVATE ioctl commands modify
the ifreq structure and expect it to be passed back to user
space, which has never really happened for compat mode
because the calling these drivers through ndo_do_ioctl
requires overwriting the ifr_data pointer.
Now that all drivers are converted to ndo_siocdevprivate,
change it to handle this correctly in both compat and
native mode.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to further reduce the scope of ndo_do_ioctl(), move
out the SIOCWANDEV handling into a new network device operation
function.
Adjust the prototype to only pass the if_settings sub-structure
in place of the ifreq, and remove the redundant 'cmd' argument
in the process.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
Cc: Kevin Curtis <kevin.curtis@farsite.co.uk>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-x25@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The compat handlers for SIOCDEVPRIVATE are incorrect for any driver that
passes data as part of struct ifreq rather than as an ifr_data pointer, or
that passes data back this way, since the compat_ifr_data_ioctl() helper
overwrites the ifr_data pointer and does not copy anything back out.
Since all drivers using devprivate commands are now converted to the
new .ndo_siocdevprivate callback, fix this by adding the missing piece
and passing the pointer separately the whole way.
This further unifies the native and compat logic for socket ioctls,
as the new code now passes the correct pointer as well as the correct
data for both native and compat ioctls.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
SIOCDEVPRIVATE ioctl commands are mainly used in really old
drivers, and they have a number of problems:
- They hide behind the normal .ndo_do_ioctl function that
is also used for other things in modern drivers, so it's
hard to spot a driver that actually uses one of these
- Since drivers use a number different calling conventions,
it is impossible to support compat mode for them in
a generic way.
- With all drivers using the same 16 commands codes, there
is no way to introspect the data being passed through
things like strace.
Add a new net_device_ops callback pointer, to address the
first two of these. Separating them from .ndo_do_ioctl
makes it easy to grep for drivers with a .ndo_siocdevprivate
callback, and the unwieldy name hopefully makes it easier
to spot in code review.
By passing the ifreq structure and the ifr_data pointer
separately, it is no longer necessary to overload these,
and the driver can use either one for a given command.
Cc: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the case when nlh is NULL in nlmsg_report(),
so that the caller doesn't need to deal with this case.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following out-of-bounds warnings:
net/core/flow_dissector.c: In function '__skb_flow_dissect':
>> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds]
1104 | memcpy(&key_addrs->v6addrs, &iph->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1105 | sizeof(key_addrs->v6addrs));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/ipv6.h:5,
from net/core/flow_dissector.c:6:
include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here
133 | struct in6_addr saddr;
| ^~~~~
>> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds]
1059 | memcpy(&key_addrs->v4addrs, &iph->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1060 | sizeof(key_addrs->v4addrs));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/ip.h:17,
from net/core/flow_dissector.c:5:
include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here
103 | __be32 saddr;
| ^~~~~
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge commit cited in fixes tag was incorrect. Due to it phys_port_name
of the virtual port resulted in incorrect name.
Also the phys_port_name of the physical port was written twice due to
the merge error.
Fix it by removing the old code and inserting back the misplaced code.
Related commits of interest in net and net-next branches that resulted
in merge conflict are:
in net-next branch:
commit f285f37cb1 ("devlink: append split port number to the port name")
in net branch:
commit b28d8f0c25 ("devlink: Correct VIRTUAL port to not have phys_port attributes")
Fixes: 126285651b ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows bpf tcp iter to call bpf_(get|set)sockopt.
To allow a specific bpf iter (tcp here) to call a set of helpers,
get_func_proto function pointer is added to bpf_iter_reg.
The bpf iter is a tracing prog which currently requires
CAP_PERFMON or CAP_SYS_ADMIN, so this patch does not
impose other capability checks for bpf_(get|set)sockopt.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200619.1036715-1-kafai@fb.com
The dev_ifconf() calling conventions make compat handling
more complicated than necessary, simplify this by moving
the in_compat_syscall() check into the function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since dynamic registration of the gifconf() helper is only used for
IPv4, and this can not be in a loadable module, this can be simplified
noticeably by turning it into a direct function call as a preparation
for cleaning up the compat handling.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
SIOCGIFMAP and SIOCSIFMAP currently require compat_alloc_user_space()
and copy_in_user() for compat mode.
Move the compat handling into the location where the structures are
actually used, to avoid using those interfaces and get a clearer
implementation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test if we actually can send/receive packets with MTU size. This kind of
issue was detected on ASIX HW with bogus EEPROM.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the IOAM inline insertion (only for the host-to-host use case)
which is per-route configured with lightweight tunnels. The target is iproute2
and the patch is ready. It will be posted as soon as this patchset is merged.
Here is an overview:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace type 0x800000 ns 1 size 12 dev eth0
This example configures an IOAM Pre-allocated Trace option attached to the
fc00::1/128 prefix. The IOAM namespace (ns) is 1, the size of the pre-allocated
trace data block is 12 octets (size) and only the first IOAM data (bit 0:
hop_limit + node id) is included in the trace (type) represented as a bitfield.
The reason why the in-transit (IPv6-in-IPv6 encapsulation) use case is not
implemented is explained on the patchset cover.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
unix sockets allows to send file descriptors via SCM_RIGHTS type messages.
Each such send call forces kernel to allocate up to 2Kb memory for
struct scm_fp_list.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An netadmin inside container can use 'ip a a' and 'ip r a'
to assign a large number of ipv4/ipv6 addresses and routing entries
and force kernel to allocate megabytes of unaccounted memory
for long-lived per-netdevice related kernel objects:
'struct in_ifaddr', 'struct inet6_ifaddr', 'struct fib6_node',
'struct rt6_info', 'struct fib_rules' and ip_fib caches.
These objects can be manually removed, though usually they lives
in memory till destroy of its net namespace.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
One of such objects is the 'struct fib6_node' mostly allocated in
net/ipv6/route.c::__ip6_ins_rt() inside the lock_bh()/unlock_bh() section:
write_lock_bh(&table->tb6_lock);
err = fib6_add(&table->tb6_root, rt, info, mxc);
write_unlock_bh(&table->tb6_lock);
In this case it is not enough to simply add SLAB_ACCOUNT to corresponding
kmem cache. The proper memory cgroup still cannot be found due to the
incorrect 'in_interrupt()' check used in memcg_kmem_bypass().
Obsoleted in_interrupt() does not describe real execution context properly.
>From include/linux/preempt.h:
The following macros are deprecated and should not be used in new code:
in_interrupt() - We're in NMI,IRQ,SoftIRQ context or have BH disabled
To verify the current execution context new macro should be used instead:
in_task() - We're in task context
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Container netadmin can create a lot of fake net devices,
then create a new net namespace and repeat it again and again.
Net device can request the creation of up to 4096 tx and rx queues,
and force kernel to allocate up to several tens of megabytes memory
per net device.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.
---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
<IRQ>
queue_userspace_packet+0x2af/0x5e0 [openvswitch]
ovs_dp_upcall+0x3d/0x60 [openvswitch]
ovs_dp_process_packet+0x125/0x150 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
netdev_port_receive+0x87/0x130 [openvswitch]
netdev_frame_hook+0x4b/0x60 [openvswitch]
__netif_receive_skb_core+0x2b4/0xc90
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x18/0x60
process_backlog+0xa9/0x160
net_rx_action+0x142/0x390
__do_softirq+0xe1/0x2d6
irq_exit+0xae/0xb0
do_IRQ+0x5a/0xf0
common_interrupt+0xf/0xf
Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
int i, j = 0;
int plen = 0; /* length of skb->head fragment */
int ret;
struct page *page;
unsigned int offset;
BUG_ON(!from->head_frag && !hlen);
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Alexander points out, when we are trying to recycle a cloned/expanded
SKB we might trigger a race. The recycling code relies on the
pp_recycle bit to trigger, which we carry over to cloned SKBs.
If that cloned SKB gets expanded or if we get references to the frags,
call skb_release_data() and overwrite skb->head, we are creating separate
instances accessing the same page frags. Since the skb_release_data()
will first try to recycle the frags, there's a potential race between
the original and cloned SKB, since both will have the pp_recycle bit set.
Fix this by explicitly those SKBs not recyclable.
The atomic_sub_return effectively limits us to a single release case,
and when we are calling skb_release_data we are also releasing the
option to perform the recycling, or releasing the pages from the page pool.
Fixes: 6a5bcd84e8 ("page_pool: Allow drivers to hint on SKB recycling")
Reported-by: Alexander Duyck <alexanderduyck@fb.com>
Suggested-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netlink_{broadcast, unicast} don't deal with 'if (err > 0' statement
but nlmsg_{multicast, unicast} do. The nlmsg_notify() contains them.
so use nlmsg_notify() instead. so that the caller wouldn't deal with
'if (err > 0' statement.
v2: use nlmsg_notify() will do well.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-07-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 45 non-merge commits during the last 15 day(s) which contain
a total of 52 files changed, 3122 insertions(+), 384 deletions(-).
The main changes are:
1) Introduce bpf timers, from Alexei.
2) Add sockmap support for unix datagram socket, from Cong.
3) Fix potential memleak and UAF in the verifier, from He.
4) Add bpf_get_func_ip helper, from Jiri.
5) Improvements to generic XDP mode, from Kumar.
6) Support for passing xdp_md to XDP programs in bpf_prog_run, from Zvi.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP and other connection oriented sockets have accept()
for each incoming connection on the server side, hence
they can just insert those fd's from accept() to sockmap,
which are of course established.
Now with datagram sockets begin to support sockmap and
redirection, the restriction is no longer applicable to
them, as they have no accept(). So we have to lift this
restriction for them. This is fine, because inside
bpf_sk_redirect_map() we still have another socket status
check, sock_map_redirect_allowed(), as a guard.
This also means they do not have to be removed from
sockmap when disconnecting.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210704190252.11866-3-xiyou.wangcong@gmail.com
Currently sock_map still has Kconfig dependency on CONFIG_INET,
but there is no actual functional dependency on it after we
introduce ->psock_update_sk_prot().
We have to extend it to CONFIG_NET now as we are going to
support AF_UNIX.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210704190252.11866-2-xiyou.wangcong@gmail.com
Andrii Nakryiko says:
====================
pull-request: bpf 2021-07-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 37 insertions(+), 15 deletions(-).
The main changes are:
1) Fix NULL pointer dereference in BPF_TEST_RUN for BPF_XDP_DEVMAP and
BPF_XDP_CPUMAP programs, from Xuan Zhuo.
2) Fix use-after-free of net_device in XDP bpf_link, from Xuan Zhuo.
3) Follow-up fix to subprog poke descriptor use-after-free problem, from
Daniel Borkmann and John Fastabend.
4) Fix out-of-range array access in s390 BPF JIT backend, from Colin Ian King.
5) Fix memory leak in BPF sockmap, from John Fastabend.
6) Fix for sockmap to prevent proc stats reporting bug, from John Fastabend
and Jakub Sitnicki.
7) Fix NULL pointer dereference in bpftool, from Tobias Klauser.
8) AF_XDP documentation fixes, from Baruch Siach.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If skb_linearize is needed and fails we could leak a msg on the error
handling. To fix ensure we kfree the msg block before returning error.
Found during code review.
Fixes: 4363023d26 ("bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20210712195546.423990-2-john.fastabend@gmail.com
Tracepoint trace_qdisc_enqueue() is introduced to trace skb at
the entrance of TC layer on TX side. This is similar to
trace_qdisc_dequeue():
1. For both we only trace successful cases. The failure cases
can be traced via trace_kfree_skb().
2. They are called at entrance or exit of TC layer, not for each
->enqueue() or ->dequeue(). This is intentional, because
we want to make trace_qdisc_enqueue() symmetric to
trace_qdisc_dequeue(), which is easier to use.
The return value of qdisc_enqueue() is not interesting here,
we have Qdisc's drop packets in ->dequeue(), it is impossible to
trace them even if we have the return value, the only way to trace
them is tracing kfree_skb().
We only add information we need to trace ring buffer. If any other
information is needed, it is easy to extend it without breaking ABI,
see commit 3dd344ea84 ("net: tracepoint: exposing sk_family in all
tcp:tracepoints").
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Qitao Xu <qitao.xu@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets
in subflow receive buffers longer than necessary, delaying
MPTCP-level ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
- netfilter: conntrack: do not mark RST in the reply direction coming
after SYN packet for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison
-----BEGIN PGP SIGNATURE-----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=QFnb
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski.
"Including fixes from bpf and netfilter.
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack:
- do not renew entry stuck in tcp SYN_SENT state
- do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison"
* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
sfc: add logs explaining XDP_TX/REDIRECT is not available
sfc: ensure correct number of XDP queues
sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
net: fddi: fix UAF in fza_probe
net: dsa: sja1105: fix address learning getting disabled on the CPU port
net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
net: Use nlmsg_unicast() instead of netlink_unicast()
octeontx2-pf: Fix uninitialized boolean variable pps
ipv6: allocate enough headroom in ip6_finish_output2()
net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
net: bridge: multicast: fix MRD advertisement router port marking race
net: bridge: multicast: fix PIM hello router port marking race
net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
dsa: fix for_each_child.cocci warnings
virtio_net: check virtqueue_add_sgs() return value
mptcp: properly account bulk freed memory
selftests: mptcp: fix case multiple subflows limited by server
mptcp: avoid processing packet if a subflow reset
mptcp: fix syncookie process if mptcp can not_accept new subflow
...
Some socket buffers allocated in the fclone cache (in __alloc_skb) can
end-up in the following path[1]:
napi_skb_finish
__kfree_skb_defer
napi_skb_cache_put
The issue is napi_skb_cache_put is not fclone friendly and will put
those skbuff in the skb cache to be reused later, although this cache
only expects skbuff allocated from skbuff_head_cache. When this happens
the skbuff is eventually freed using the wrong origin cache, and we can
see traces similar to:
[ 1223.947534] cache_from_obj: Wrong slab cache. skbuff_head_cache but object is from skbuff_fclone_cache
[ 1223.948895] WARNING: CPU: 3 PID: 0 at mm/slab.h:442 kmem_cache_free+0x251/0x3e0
[ 1223.950211] Modules linked in:
[ 1223.950680] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.13.0+ #474
[ 1223.951587] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-3.fc34 04/01/2014
[ 1223.953060] RIP: 0010:kmem_cache_free+0x251/0x3e0
Leading sometimes to other memory related issues.
Fix this by using __kfree_skb for fclone skbuff, similar to what is done
the other place __kfree_skb_defer is called.
[1] At least in setups using veth pairs and tunnels. Building a kernel
with KASAN we can for example see packets allocated in
sk_stream_alloc_skb hit the above path and later the issue arises
when the skbuff is reused.
Fixes: 9243adfc31 ("skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeing")
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will fail to build with CONFIG_SKB_EXTENSIONS disabled after
8550ff8d8c ("skbuff: Release nfct refcount on napi stolen or re-used
skbs") since there is an unconditionally use of skb_ext_find() without
an appropriate stub. Simply build the code conditionally and properly
guard against both COFNIG_SKB_EXTENSIONS as well as
CONFIG_NET_TC_SKB_EXT being disabled.
Fixes: Fixes: 8550ff8d8c ("skbuff: Release nfct refcount on napi stolen or re-used skbs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If copy_from_sockptr() then we need to unlock before returning.
Fixes: d463126e23 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This lifts the restriction on running devmap BPF progs in generic
redirect mode. To match native XDP behavior, it is invoked right before
generic_xdp_tx is called, and only supports XDP_PASS/XDP_ABORTED/
XDP_DROP actions.
We also return 0 even if devmap program drops the packet, as
semantically redirect has already succeeded and the devmap prog is the
last point before TX of the packet to device where it can deliver a
verdict on the packet.
This also means it must take care of freeing the skb, as
xdp_do_generic_redirect callers only do that in case an error is
returned.
Since devmap entry prog is supported, remove the check in
generic_xdp_install entirely.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210702111825.491065-5-memxor@gmail.com
This change implements CPUMAP redirect support for generic XDP programs.
The idea is to reuse the cpu map entry's queue that is used to push
native xdp frames for redirecting skb to a different CPU. This will
match native XDP behavior (in that RPS is invoked again for packet
reinjected into networking stack).
To be able to determine whether the incoming skb is from the driver or
cpumap, we reuse skb->redirected bit that skips generic XDP processing
when it is set. To always make use of this, CONFIG_NET_REDIRECT guard on
it has been lifted and it is always available.
>From the redirect side, we add the skb to ptr_ring with its lowest bit
set to 1. This should be safe as skb is not 1-byte aligned. This allows
kthread to discern between xdp_frames and sk_buff. On consumption of the
ptr_ring item, the lowest bit is unset.
In the end, the skb is simply added to the list that kthread is anyway
going to maintain for xdp_frames converted to skb, and then received
again by using netif_receive_skb_list.
Bulking optimization for generic cpumap is left as an exercise for a
future patch for now.
Since cpumap entry progs are now supported, also remove check in
generic_xdp_install for the cpumap.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210702111825.491065-4-memxor@gmail.com
This helper can later be utilized in code that runs cpumap and devmap
programs in generic redirect mode and adjust skb based on changes made
to xdp_buff.
When returning XDP_REDIRECT/XDP_TX, it invokes __skb_push, so whenever a
generic redirect path invokes devmap/cpumap prog if set, it must
__skb_pull again as we expect mac header to be pulled.
It also drops the skb_reset_mac_len call after do_xdp_generic, as the
mac_header and network_header are advanced by the same offset, so the
difference (mac_len) remains constant.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210702111825.491065-2-memxor@gmail.com
This commit prepares to use the XDP meta data length check in multiple
places by making it into a static inline function instead of a literal.
Co-developed-by: Cody Haas <chaas@riotgames.com>
Co-developed-by: Lisa Watanabe <lwatanabe@riotgames.com>
Signed-off-by: Cody Haas <chaas@riotgames.com>
Signed-off-by: Lisa Watanabe <lwatanabe@riotgames.com>
Signed-off-by: Zvi Effron <zeffron@riotgames.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210707221657.3985075-2-zeffron@riotgames.com
When multiple SKBs are merged to a new skb under napi GRO,
or SKB is re-used by napi, if nfct was set for them in the
driver, it will not be released while freeing their stolen
head state or on re-use.
Release nfct on napi's stolen or re-used SKBs, and
in gro_list_prepare, check conntrack metadata diff.
Fixes: 5c6b946047 ("net/mlx5e: CT: Handle misses after executing CT action")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some tests are failing, John bisected the issue to a recent commit.
sock_set_timestamp() parameters should be :
1) sk
2) optname
3) valbool
Fixes: 371087aa47 ("sock: expose so_timestamp options for mptcp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The get_unaligned()/put_unaligned() helpers are traditionally architecture
specific, with the two main variants being the "access-ok.h" version
that assumes unaligned pointer accesses always work on a particular
architecture, and the "le-struct.h" version that casts the data to a
byte aligned type before dereferencing, for architectures that cannot
always do unaligned accesses in hardware.
Based on the discussion linked below, it appears that the access-ok
version is not realiable on any architecture, but the struct version
probably has no downsides. This series changes the code to use the
same implementation on all architectures, addressing the few exceptions
separately.
Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=IY5U
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm/unaligned.h unification from Arnd Bergmann:
"Unify asm/unaligned.h around struct helper
The get_unaligned()/put_unaligned() helpers are traditionally
architecture specific, with the two main variants being the
"access-ok.h" version that assumes unaligned pointer accesses always
work on a particular architecture, and the "le-struct.h" version that
casts the data to a byte aligned type before dereferencing, for
architectures that cannot always do unaligned accesses in hardware.
Based on the discussion linked below, it appears that the access-ok
version is not realiable on any architecture, but the struct version
probably has no downsides. This series changes the code to use the
same implementation on all architectures, addressing the few
exceptions separately"
Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/
* tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: simplify asm/unaligned.h
asm-generic: uaccess: 1-byte access is always aligned
netpoll: avoid put_unaligned() on single character
mwifiex: re-fix for unaligned accesses
apparmor: use get_unaligned() only for multi-byte words
partitions: msdos: fix one-byte get_unaligned()
asm-generic: unaligned always use struct helpers
asm-generic: unaligned: remove byteshift helpers
powerpc: use linux/unaligned/le_struct.h on LE power7
m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
sh: remove unaligned access for sh4a
openrisc: always use unaligned-struct header
asm-generic: use asm-generic/unaligned.h for most architectures
Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.
This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.
This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_ll_usec is read locklessly from sk_can_busy_loop()
while another thread can change its value in sock_setsockopt()
This is correct but needs annotations.
BUG: KCSAN: data-race in __skb_try_recv_datagram / sock_setsockopt
write to 0xffff88814eb5f904 of 4 bytes by task 14011 on cpu 0:
sock_setsockopt+0x1287/0x2090 net/core/sock.c:1175
__sys_setsockopt+0x14f/0x200 net/socket.c:2100
__do_sys_setsockopt net/socket.c:2115 [inline]
__se_sys_setsockopt net/socket.c:2112 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2112
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88814eb5f904 of 4 bytes by task 14001 on cpu 1:
sk_can_busy_loop include/net/busy_poll.h:41 [inline]
__skb_try_recv_datagram+0x14f/0x320 net/core/datagram.c:273
unix_dgram_recvmsg+0x14c/0x870 net/unix/af_unix.c:2101
unix_seqpacket_recvmsg+0x5a/0x70 net/unix/af_unix.c:2067
____sys_recvmsg+0x15d/0x310 include/linux/uio.h:244
___sys_recvmsg net/socket.c:2598 [inline]
do_recvmmsg+0x35c/0x9f0 net/socket.c:2692
__sys_recvmmsg net/socket.c:2771 [inline]
__do_sys_recvmmsg net/socket.c:2794 [inline]
__se_sys_recvmmsg net/socket.c:2787 [inline]
__x64_sys_recvmmsg+0xcf/0x150 net/socket.c:2787
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000000 -> 0x00000101
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14001 Comm: syz-executor.3 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"Static" is a loaded word, and probably not what the author meant when
the code was written.
In particular, this looks weird:
$ bridge fdb add dev swp0 00:01:02:03:04:05 local # totally fine, but
$ bridge fdb add dev swp0 00:01:02:03:04:05 static
[ 2020.708298] swp0: FDB only supports static addresses # hmm what?
By looking at the implementation which uses dev_uc_add/dev_uc_del it is
absolutely clear that only local addresses are supported, and the proper
Network Unreachability Detection state is being used for this purpose
(user space indeed sets NUD_PERMANENT when local addresses are meant).
So it is just the message that is wrong, fix it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the more modern printk helper for network interfaces, which also
contains information about the associated struct device, and results in
overall shorter line lengths compared to printing an open-coded
dev->name.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch will add tracers to trace inet socket errors only. A user
space monitor application can track connection errors indepedent from
socket lifetime and do additional handling. For example a cluster
manager can fence a node if errors occurs in a specific heuristic.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Printing this stack dump multiple times does not provide additional
useful information, and consumes time in the data path. Printing once
is sufficient.
Changes
v2: Format indentation properly
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-28
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 12 day(s) which contain
a total of 56 files changed, 394 insertions(+), 380 deletions(-).
The main changes are:
1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney.
2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski.
3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev.
4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria.
5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards.
6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa.
7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi.
8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim.
9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young.
10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer.
11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski.
12) Fix up bpfilter startup log-level to info level, from Gary Lin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
xdp_rxq_info_unreg() implicitly calls xdp_rxq_info_unreg_mem_model().
This may well be confusing to the driver authors, and lead to double free
if they call xdp_rxq_info_unreg_mem_model() before xdp_rxq_info_unreg()
(when mem model type == MEM_TYPE_PAGE_POOL).
In fact error path of mvpp2_rxq_init() seems to currently do exactly that.
The double free will result in refcount underflow in page_pool_destroy().
Make the interface a little more programmer friendly by clearing type and
id so that xdp_rxq_info_unreg_mem_model() can be called multiple times.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210625221612.2637086-1-kuba@kernel.org
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow
the flexible utilization of SMT siblings, without exposing
untrusted domains to information leaks & side channels, plus
to ensure more deterministic computing performance on SMT
systems used by heterogenous workloads.
There's new prctls to set core scheduling groups, which
allows more flexible management of workloads that can share
siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve
'memcache'-like workloads.
- "Age" (decay) average idle time, to better track & improve workloads
such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked
via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable
it at runtime if tooling needs it. Use static keys and
other optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmDZcPoRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1g3yw//WfhIqy7Psa9d/MBMjQDRGbTuO4+w22Dj
vmWFU44Q4KJxQHWeIgUlrK+dzvYWvNmflUs2CUUOiDVzxFTHMIyBtL4qCBUbx4Ns
vKAcB9wsWZge2o3WzZqpProRhdoRaSKw8egUr2q7rACVBkckY7eGP/OjWxXU8BdA
b7D0LPWwuIBFfN4pFYeCDLn32Dqr9s6Chyj+ZecabdG7EE6Gu+f1diVcxy7JE/mc
4WWL0D1RqdgpGrBEuMJIxPYekdrZiuy4jtEbztz5gbTBteN1cj3BLfqn0Pc/e6rO
Vyuc5mXCAmzRVi18z6g6bsVl+IA/nrbErENB2OHOhOYtqiZxqGTd4GPWZszMyY17
5AsEO5+5pcaBsy4gyp09qURggBu9zhJnMVmOI3rIHZkmkhwzc6uUJlyhDCTiFWOz
3ZF3LjbZEyCKodMD8qMHbs3axIBpIfZqjzkvSKyFnvfXEGVytVse7NUuWtQ36u92
GnURxVeYY1TDVXvE1Y8owNKMxknKQ6YRlypP7Dtbeo/qG6hShp0xmS7qDLDi0ybZ
ZlK+bDECiVoDf3nvJo+8v5M82IJ3CBt4UYldeRJsa1YCK/FsbK8tp91fkEfnXVue
+U6LPX0AmMpXacR5HaZfb3uBIKRw/QMdP/7RFtBPhpV6jqCrEmuqHnpPQiEVtxwO
UmG7bt94Trk=
=3VDr
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
- Core locking & atomics:
- Convert all architectures to ARCH_ATOMIC: move every
architecture to ARCH_ATOMIC, then get rid of ARCH_ATOMIC
and all the transitory facilities and #ifdefs.
Much reduction in complexity from that series:
63 files changed, 756 insertions(+), 4094 deletions(-)
- Self-test enhancements
- Futexes:
- Add the new FUTEX_LOCK_PI2 ABI, which is a variant that
doesn't set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).
[ The temptation to repurpose FUTEX_LOCK_PI's implicit
setting of FLAGS_CLOCKRT & invert the flag's meaning
to avoid having to introduce a new variant was
resisted successfully. ]
- Enhance futex self-tests
- Lockdep:
- Fix dependency path printouts
- Optimize trace saving
- Broaden & fix wait-context checks
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tH//
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Core locking & atomics:
- Convert all architectures to ARCH_ATOMIC: move every architecture
to ARCH_ATOMIC, then get rid of ARCH_ATOMIC and all the
transitory facilities and #ifdefs.
Much reduction in complexity from that series:
63 files changed, 756 insertions(+), 4094 deletions(-)
- Self-test enhancements
- Futexes:
- Add the new FUTEX_LOCK_PI2 ABI, which is a variant that doesn't
set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).
[ The temptation to repurpose FUTEX_LOCK_PI's implicit setting of
FLAGS_CLOCKRT & invert the flag's meaning to avoid having to
introduce a new variant was resisted successfully. ]
- Enhance futex self-tests
- Lockdep:
- Fix dependency path printouts
- Optimize trace saving
- Broaden & fix wait-context checks
- Misc cleanups and fixes.
* tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
locking/lockdep: Correct the description error for check_redundant()
futex: Provide FUTEX_LOCK_PI2 to support clock selection
futex: Prepare futex_lock_pi() for runtime clock selection
lockdep/selftest: Remove wait-type RCU_CALLBACK tests
lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
lockdep: Fix wait-type for empty stack
locking/selftests: Add a selftest for check_irq_usage()
lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
locking/lockdep: Remove the unnecessary trace saving
locking/lockdep: Fix the dep path printing for backwards BFS
selftests: futex: Add futex compare requeue test
selftests: futex: Add futex wait test
seqlock: Remove trailing semicolon in macros
locking/lockdep: Reduce LOCKDEP dependency list
locking/lockdep,doc: Improve readability of the block matrix
locking/atomics: atomic-instrumented: simplify ifdeffery
locking/atomic: delete !ARCH_ATOMIC remnants
locking/atomic: xtensa: move to ARCH_ATOMIC
locking/atomic: sparc: move to ARCH_ATOMIC
locking/atomic: sh: move to ARCH_ATOMIC
...
It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.
Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.
Thus, this is following up on Eric's commit 3d368ab87c ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE. This is also in line in how we retrieve socket cookie
via SO_COOKIE.
[1] https://kind.sigs.k8s.io/
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XDP_REDIRECT works by a three-step process: the bpf_redirect() and
bpf_redirect_map() helpers will lookup the target of the redirect and store
it (along with some other metadata) in a per-CPU struct bpf_redirect_info.
Next, when the program returns the XDP_REDIRECT return code, the driver
will call xdp_do_redirect() which will use the information thus stored to
actually enqueue the frame into a bulk queue structure (that differs
slightly by map type, but shares the same principle). Finally, before
exiting its NAPI poll loop, the driver will call xdp_do_flush(), which will
flush all the different bulk queues, thus completing the redirect.
Pointers to the map entries will be kept around for this whole sequence of
steps, protected by RCU. However, there is no top-level rcu_read_lock() in
the core code; instead drivers add their own rcu_read_lock() around the XDP
portions of the code, but somewhat inconsistently as Martin discovered[0].
However, things still work because everything happens inside a single NAPI
poll sequence, which means it's between a pair of calls to
local_bh_disable()/local_bh_enable(). So Paul suggested[1] that we could
document this intention by using rcu_dereference_check() with
rcu_read_lock_bh_held() as a second parameter, thus allowing sparse and
lockdep to verify that everything is done correctly.
This patch does just that: we add an __rcu annotation to the map entry
pointers and remove the various comments explaining the NAPI poll assurance
strewn through devmap.c in favour of a longer explanation in filter.c. The
goal is to have one coherent documentation of the entire flow, and rely on
the RCU annotations as a "standard" way of communicating the flow in the
map code (which can additionally be understood by sparse and lockdep).
The RCU annotation replacements result in a fairly straight-forward
replacement where READ_ONCE() becomes rcu_dereference_check(), WRITE_ONCE()
becomes rcu_assign_pointer() and xchg() and cmpxchg() gets wrapped in the
proper constructs to cast the pointer back and forth between __rcu and
__kernel address space (for the benefit of sparse). The one complication is
that xskmap has a few constructions where double-pointers are passed back
and forth; these simply all gain __rcu annotations, and only the final
reference/dereference to the inner-most pointer gets changed.
With this, everything can be run through sparse without eliciting
complaints, and lockdep can verify correctness even without the use of
rcu_read_lock() in the drivers. Subsequent patches will clean these up from
the drivers.
[0] https://lore.kernel.org/bpf/20210415173551.7ma4slcbqeyiba2r@kafai-mbp.dhcp.thefacebook.com/
[1] https://lore.kernel.org/bpf/20210419165837.GA975577@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210624160609.292325-6-toke@redhat.com
Since we no longer modify gso_size, it is now theoretically
safe to not set SKB_GSO_DODGY and reset gso_segs to zero.
This also means the skb_is_gso_tcp() check should no longer
be necessary.
Unfortunately we cannot remove the skb_{decrease,increase}_gso_size()
helpers, as they are still used elsewhere:
bpf_skb_net_grow() without BPF_F_ADJ_ROOM_FIXED_GSO
bpf_skb_net_shrink() without BPF_F_ADJ_ROOM_FIXED_GSO
net/core/lwt_bpf.c's handle_gso_type()
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20210617000953.2787453-3-zenczykowski@gmail.com
This is technically a backwards incompatible change in behaviour, but I'm
going to argue that it is very unlikely to break things, and likely to fix
*far* more then it breaks.
In no particular order, various reasons follow:
(a) I've long had a bug assigned to myself to debug a super rare kernel crash
on Android Pixel phones which can (per stacktrace) be traced back to BPF clat
IPv6 to IPv4 protocol conversion causing some sort of ugly failure much later
on during transmit deep in the GSO engine, AFAICT precisely because of this
change to gso_size, though I've never been able to manually reproduce it. I
believe it may be related to the particular network offload support of attached
USB ethernet dongle being used for tethering off of an IPv6-only cellular
connection. The reason might be we end up with more segments than max permitted,
or with a GSO packet with only one segment... (either way we break some
assumption and hit a BUG_ON)
(b) There is no check that the gso_size is > 20 when reducing it by 20, so we
might end up with a negative (or underflowing) gso_size or a gso_size of 0.
This can't possibly be good. Indeed this is probably somehow exploitable (or
at least can result in a kernel crash) by delivering crafted packets and perhaps
triggering an infinite loop or a divide by zero... As a reminder: gso_size (MSS)
is related to MTU, but not directly derived from it: gso_size/MSS may be
significantly smaller then one would get by deriving from local MTU. And on
some NICs (which do loose MTU checking on receive, it may even potentially be
larger, for example my work pc with 1500 MTU can receive 1520 byte frames [and
sometimes does due to bugs in a vendor plat46 implementation]). Indeed even just
going from 21 to 1 is potentially problematic because it increases the number
of segments by a factor of 21 (think DoS, or some other crash due to too many
segments).
(c) It's always safe to not increase the gso_size, because it doesn't result in
the max packet size increasing. So the skb_increase_gso_size() call was always
unnecessary for correctness (and outright undesirable, see later). As such the
only part which is potentially dangerous (ie. could cause backwards compatibility
issues) is the removal of the skb_decrease_gso_size() call.
(d) If the packets are ultimately destined to the local device, then there is
absolutely no benefit to playing around with gso_size. It only matters if the
packets will egress the device. ie. we're either forwarding, or transmitting
from the device.
(e) This logic only triggers for packets which are GSO. It does not trigger for
skbs which are not GSO. It will not convert a non-GSO MTU sized packet into a
GSO packet (and you don't even know what the MTU is, so you can't even fix it).
As such your transmit path must *already* be able to handle an MTU 20 bytes
larger then your receive path (for IPv4 to IPv6 translation) - and indeed 28
bytes larger due to IPv4 fragments. Thus removing the skb_decrease_gso_size()
call doesn't actually increase the size of the packets your transmit side must
be able to handle. ie. to handle non-GSO max-MTU packets, the IPv4/IPv6 device/
route MTUs must already be set correctly. Since for example with an IPv4 egress
MTU of 1500, IPv4 to IPv6 translation will already build 1520 byte IPv6 frames,
so you need a 1520 byte device MTU. This means if your IPv6 device's egress
MTU is 1280, your IPv4 route must be 1260 (and actually 1252, because of the
need to handle fragments). This is to handle normal non-GSO packets. Thus the
reduction is simply not needed for GSO packets, because when they're correctly
built, they will already be the right size.
(f) TSO/GSO should be able to exactly undo GRO: the number of packets (TCP
segments) should not be modified, so that TCP's MSS counting works correctly
(this matters for congestion control). If protocol conversion changes the
gso_size, then the number of TCP segments may increase or decrease. Packet loss
after protocol conversion can result in partial loss of MSS segments that the
sender sent. How's the sending TCP stack going to react to receiving ACKs/SACKs
in the middle of the segments it sent?
(g) skb_{decrease,increase}_gso_size() are already no-ops for GSO_BY_FRAGS
case (besides triggering WARN_ON_ONCE). This means you already cannot guarantee
that gso_size (and thus resulting packet MTU) is changed. ie. you must assume
it won't be changed.
(h) changing gso_size is outright buggy for UDP GSO packets, where framing
matters (I believe that's also the case for SCTP, but it's already excluded
by [g]). So the only remaining case is TCP, which also doesn't want it
(see [f]).
(i) see also the reasoning on the previous attempt at fixing this
(commit fa7b83bf3b) which shows that the current
behaviour causes TCP packet loss:
In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the
coalesced packet payload can be > MSS, but < MSS + 20.
bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload
length. After then tcp_gso_segment checks for the payload length if it
is <= MSS. The condition is causing the packet to be dropped.
tcp_gso_segment():
[...]
mss = skb_shinfo(skb)->gso_size;
if (unlikely(skb->len <= mss)) goto out;
[...]
Thus changing the gso_size is simply a very bad idea. Increasing is unnecessary
and buggy, and decreasing can go negative.
Fixes: 6578171a7f ("bpf: add bpf_skb_change_proto helper")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/CANP3RGfjLikQ6dg=YpBU0OeHvyv7JOki7CyOUS9modaXAi-9vQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210617000953.2787453-2-zenczykowski@gmail.com
This reverts commit fa7b83bf3b.
See the followup commit for the reasoning why I believe the appropriate
approach is to simply make this change without a flag, but it can basically
be summarized as using this helper without the flag is bug-prone or outright
buggy, and thus the default should be this new behaviour.
As this commit has only made it into net-next/master, but not into
any real release, such a backwards incompatible change is still ok.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dongseok Yi <dseok.yi@samsung.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20210617000953.2787453-1-zenczykowski@gmail.com
Devlink eswitch set command doesn't hold devlink->lock, which makes
possible race condition between rate list traversing and others devlink
rate KAPI calls, like devlink_rate_nodes_destroy().
Hold devlink lock while traversing the list.
Fixes: a8ecb93ef0 ("devlink: Introduce rate nodes")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When eswitch is disabled, querying its current mode results in error.
Due to this when trying to set the eswitch mode for mlx5 devices, it
fails to set the eswitch switchdev mode.
Hence remove such check.
Fixes: a8ecb93ef0 ("devlink: Introduce rate nodes")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Port functions, like SFs, can be deleted by the user when its leaf rate
object has parent node. In such case node refcnt won't be decreased
which blocks the node from deletion later.
Do simple refcnt decrease, since driver in cleanup stage. This:
1) assumes that driver took proper internal parent unset action;
2) allows to avoid nested callbacks call and deadlock.
Fixes: d755598450 ("devlink: Allow setting parent node of rate objects")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-06-23
The following pull-request contains BPF updates for your *net* tree.
We've added 14 non-merge commits during the last 6 day(s) which contain
a total of 13 files changed, 137 insertions(+), 64 deletions(-).
Note that when you merge net into net-next, there is a small merge conflict
between 9f2470fbc4 ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf
with c49661aa6f ("skmsg: Remove unused parameters of sk_msg_wait_data()")
from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data()
and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take
tcp_msg_wait_data() and remove err parameter from the function, iii) for
net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data()
implementation and its prototype in header.
The main changes are:
1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend.
2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski.
3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang.
4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar.
5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson.
6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds two stats for the socket migration feature to evaluate the
effectiveness: LINUX_MIB_TCPMIGRATEREQ(SUCCESS|FAILURE).
If the migration fails because of the own_req race in receiving ACK and
sending SYN+ACK paths, we do not increment the failure stat. Then another
CPU is responsible for the req.
Link: https://lore.kernel.org/bpf/CAK6E8=cgFKuGecTzSCSQ8z3YJ_163C0uwO9yRvfDSE7vOe9mJA@mail.gmail.com/
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently pfifo_fast has both TCQ_F_CAN_BYPASS and TCQ_F_NOLOCK
flag set, but queue discipline by-pass does not work for lockless
qdisc because skb is always enqueued to qdisc even when the qdisc
is empty, see __dev_xmit_skb().
This patch calls sch_direct_xmit() to transmit the skb directly
to the driver for empty lockless qdisc, which aviod enqueuing
and dequeuing operation.
As qdisc->empty is not reliable to indicate a empty qdisc because
there is a time window between enqueuing and setting qdisc->empty.
So we use the MISSED state added in commit a90c57f2ce ("net:
sched: fix packet stuck problem for lockless qdisc"), which
indicate there is lock contention, suggesting that it is better
not to do the qdisc bypass in order to avoid packet out of order
problem.
In order to make MISSED state reliable to indicate a empty qdisc,
we need to ensure that testing and clearing of MISSED state is
within the protection of qdisc->seqlock, only setting MISSED state
can be done without the protection of qdisc->seqlock. A MISSED
state testing is added without the protection of qdisc->seqlock to
aviod doing unnecessary spin_trylock() for contention case.
As the enqueuing is not within the protection of qdisc->seqlock,
there is still a potential data race as mentioned by Jakub [1]:
thread1 thread2 thread3
qdisc_run_begin() # true
qdisc_run_begin(q)
set(MISSED)
pfifo_fast_dequeue
clear(MISSED)
# recheck the queue
qdisc_run_end()
enqueue skb1
qdisc empty # true
qdisc_run_begin() # true
sch_direct_xmit() # skb2
qdisc_run_begin()
set(MISSED)
When above happens, skb1 enqueued by thread2 is transmited after
skb2 is transmited by thread3 because MISSED state setting and
enqueuing is not under the qdisc->seqlock. If qdisc bypass is
disabled, skb1 has better chance to be transmited quicker than
skb2.
This patch does not take care of the above data race, because we
view this as similar as below:
Even at the same time CPU1 and CPU2 write the skb to two socket
which both heading to the same qdisc, there is no guarantee that
which skb will hit the qdisc first, because there is a lot of
factor like interrupt/softirq/cache miss/scheduling afffecting
that.
There are below cases that need special handling:
1. When MISSED state is cleared before another round of dequeuing
in pfifo_fast_dequeue(), and __qdisc_run() might not be able to
dequeue all skb in one round and call __netif_schedule(), which
might result in a non-empty qdisc without MISSED set. In order
to avoid this, the MISSED state is set for lockless qdisc and
__netif_schedule() will be called at the end of qdisc_run_end.
2. The MISSED state also need to be set for lockless qdisc instead
of calling __netif_schedule() directly when requeuing a skb for
a similar reason.
3. For netdev queue stopped case, the MISSED case need clearing
while the netdev queue is stopped, otherwise there may be
unnecessary __netif_schedule() calling. So a new DRAINING state
is added to indicate this case, which also indicate a non-empty
qdisc.
4. As there is already netif_xmit_frozen_or_stopped() checking in
dequeue_skb() and sch_direct_xmit(), which are both within the
protection of qdisc->seqlock, but the same checking in
__dev_xmit_skb() is without the protection, which might cause
empty indication of a lockless qdisc to be not reliable. So
remove the checking in __dev_xmit_skb(), and the checking in
the protection of qdisc->seqlock seems enough to avoid the cpu
consumption problem for netdev queue stopped case.
1. https://lkml.org/lkml/2021/5/29/215
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.
Fix this by casting 1 operand to u64.
Fixes: 0d2c4f9640 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064fb ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ffb7 ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
The preempt disable around do_xdp_generic() has been introduced in
commit
bbbe211c29 ("net: rcu lock and preempt disable missing around generic xdp")
For BPF it is enough to use migrate_disable() and the code was updated
as it can be seen in commit
3c58482a38 ("bpf: Provide bpf_prog_run_pin_on_cpu() helper")
This is a leftover which was not converted.
Use migrate_disable() before invoking do_xdp_generic().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is hard to observe packet drops without increasing relevant
drop counters, here we should increase sk->sk_drops which is
a protocol-independent counter. Fortunately psock is always
associated with a struct sock, we can just use psock->sk.
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-9-xiyou.wangcong@gmail.com
sk_psock_skb_redirect() only takes skb as a parameter, we
will need to know where this skb is from, so just pass
the source psock to this function as a new parameter.
This patch prepares for the next one.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-8-xiyou.wangcong@gmail.com
Currently sk_psock_verdict_apply() is void, but it handles some
error conditions too. Its caller is impossible to learn whether
it succeeds or fails, especially sk_psock_verdict_recv().
Make it return int to indicate error cases and propagate errors
to callers properly.
Fixes: ef5659280e ("bpf, sockmap: Allow skipping sk_skb parser program")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-7-xiyou.wangcong@gmail.com
If the dest psock does not set SK_PSOCK_TX_ENABLED,
the skb can't be queued anywhere so must be dropped.
This one is found during code review.
Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-6-xiyou.wangcong@gmail.com
When we drop skb inside sk_psock_skb_redirect(), we have to clear
its skb->_sk_redir pointer too, otherwise kfree_skb() would
misinterpret it as a valid skb->_skb_refdst and dst_release()
would eventually complain.
Fixes: e3526bb92a ("skmsg: Move sk_redir from TCP_SKB_CB to skb")
Reported-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-5-xiyou.wangcong@gmail.com
I tried to reuse sk_msg_wait_data() for different protocols,
but it turns out it can not be simply reused. For example,
UDP actually uses two queues to receive skb:
udp_sk(sk)->reader_queue and sk->sk_receive_queue. So we have
to check both of them to know whether we have received any
packet.
Also, UDP does not lock the sock during BH Rx path, it makes
no sense for its ->recvmsg() to lock the sock. It is always
possible for ->recvmsg() to be called before packets actually
arrive in the receive queue, we just use best effort to make
it accurate here.
Fixes: 1f5be6b3b0 ("udp: Implement udp_bpf_recvmsg() for sockmap")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-2-xiyou.wangcong@gmail.com
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the type and name of task_struct::state. Drop the volatile and
shrink it to an 'unsigned int'. Rename it in order to find all uses
such that we can use READ_ONCE/WRITE_ONCE as appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20210611082838.550736351@infradead.org
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The function get_net_ns_by_fd() could be inlined when NET_NS is not
enabled.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT
to check if the attached eBPF program is capable of migrating sockets. When
the eBPF program is attached, we run it for socket migration if the
expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or
net.ipv4.tcp_migrate_req is enabled.
Currently, the expected_attach_type is not enforced for the
BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the
earlier idea in the commit aac3fc320d ("bpf: Post-hooks for sys_bind") to
fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type().
Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to
select a new listener based on the child socket. migrating_sk varies
depending on if it is migrating a request in the accept queue or during
3WHS.
- accept_queue : sock (ESTABLISHED/SYN_RECV)
- 3WHS : request_sock (NEW_SYN_RECV)
In the eBPF program, we can select a new listener by
BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning
SK_DROP. This feature is useful when listeners have different settings at
the socket API level or when we want to free resources as soon as possible.
- SK_PASS with selected_sk, select it as a new listener
- SK_PASS with selected_sk NULL, fallbacks to the random selection
- SK_DROP, cancel the migration.
There is a noteworthy point. We select a listening socket in three places,
but we do not have struct skb at closing a listener or retransmitting a
SYN+ACK. On the other hand, some helper functions do not expect skb is NULL
(e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer()
in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb
temporarily before running the eBPF program.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
We will call sock_reuseport.prog for socket migration in the next commit,
so the eBPF program has to know which listener is closing to select a new
listener.
We can currently get a unique ID of each listener in the userspace by
calling bpf_map_lookup_elem() for BPF_MAP_TYPE_REUSEPORT_SOCKARRAY map.
This patch makes the pointer of sk available in sk_reuseport_md so that we
can get the ID by BPF_FUNC_get_socket_cookie() in the eBPF program.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201119001154.kapwihc2plp4f7zc@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-9-kuniyu@amazon.co.jp
reuseport_migrate_sock() does the same check done in
reuseport_listen_stop_sock(). If the reuseport group is capable of
migration, reuseport_migrate_sock() selects a new listener by the child
socket hash and increments the listener's sk_refcnt beforehand. Thus, if we
fail in the migration, we have to decrement it later.
We will support migration by eBPF in the later commits.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-5-kuniyu@amazon.co.jp
When we close a listening socket, to migrate its connections to another
listener in the same reuseport group, we have to handle two kinds of child
sockets. One is that a listening socket has a reference to, and the other
is not.
The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the
accept queue of their listening socket. So we can pop them out and push
them into another listener's queue at close() or shutdown() syscalls. On
the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the
three-way handshake and not in the accept queue. Thus, we cannot access
such sockets at close() or shutdown() syscalls. Accordingly, we have to
migrate immature sockets after their listening socket has been closed.
Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV
sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At
that time, if we could select a new listener from the same reuseport group,
no connection would be aborted. However, we cannot do that because
reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to
the reuseport group from closed sockets.
This patch allows TCP_CLOSE sockets to remain in the reuseport group and
access it while any child socket references them. The point is that
reuseport_detach_sock() was called twice from inet_unhash() and
sk_destruct(). This patch replaces the first reuseport_detach_sock() with
reuseport_stop_listen_sock(), which checks if the reuseport group is
capable of migration. If capable, it decrements num_socks, moves the socket
backwards in socks[] and increments num_closed_socks. When all connections
are migrated, sk_destruct() calls reuseport_detach_sock() to remove the
socket from socks[], decrement num_closed_socks, and set NULL to
sk_reuseport_cb.
By this change, closed or shutdowned sockets can keep sk_reuseport_cb.
Consequently, calling listen() after shutdown() can cause EADDRINUSE or
EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects
such sockets not to have the reuseport group. Therefore, this patch also
loosens such validation rules so that a socket can listen again if it has a
reuseport group with num_closed_socks more than 0.
When such sockets listen again, we handle them in reuseport_resurrect(). If
there is an existing reuseport group (reuseport_add_sock() path), we move
the socket from the old group to the new one and free the old one if
necessary. If there is no existing group (reuseport_alloc() path), we
allocate a new reuseport group, detach sk from the old one, and free it if
necessary, not to break the current shutdown behaviour:
- we cannot carry over the eBPF prog of shutdowned sockets
- we cannot attach/detach an eBPF prog to/from listening sockets via
shutdowned sockets
Note that when the number of sockets gets over U16_MAX, we try to detach a
closed socket randomly to make room for the new listening socket in
reuseport_grow().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
As noted in the following commit, a closed listener has to hold the
reference to the reuseport group for socket migration. This patch adds a
field (num_closed_socks) to struct sock_reuseport to manage closed sockets
within the same reuseport group. Moreover, this and the following commits
introduce some helper functions to split socks[] into two sections and keep
TCP_LISTEN and TCP_CLOSE sockets in each section. Like a double-ended
queue, we will place TCP_LISTEN sockets from the front and TCP_CLOSE
sockets from the end.
TCP_LISTEN----------> <-------TCP_CLOSE
+---+---+ --- +---+ --- +---+ --- +---+
| 0 | 1 | ... | i | ... | j | ... | k |
+---+---+ --- +---+ --- +---+ --- +---+
i = num_socks - 1
j = max_socks - num_closed_socks
k = max_socks - 1
This patch also extends reuseport_add_sock() and reuseport_grow() to
support num_closed_socks.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-3-kuniyu@amazon.co.jp
After the blamed patch, __skb_flow_dissect() on the DSA master stopped
adjusting for the length of the DSA headers. This is because it was told
to adjust only if the needed_headroom is zero, aka if there is no DSA
header. Of course, the adjustment should be done only if there _is_ a
DSA header.
Modify the comment too so it is clearer.
Fixes: 4e50025129 ("net: dsa: generalize overhead for taggers that use both headers and trailers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever query statistics is issued for trap, devlink subsystem
would also fill-in statistics 'dropped' field. This field indicates
the number of packets HW dropped and failed to report to the device driver,
and thus - to the devlink subsystem itself.
In case if device driver didn't register callback for hard drop
statistics querying, 'dropped' field will be omitted and not filled.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to create (and destroy) interfaces via a new
rtnetlink kind "wwan". The responsible driver has to use
the new wwan_register_ops() to make this possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases, for example in the upcoming WWAN framework changes,
there's no natural "parent netdev", so sometimes dummy netdevs are
created or similar. IFLA_PARENT_DEV_NAME is a new attribute intended to
contain a device (sysfs, struct device) name that can be used instead
when creating a new netdev, if the rtnetlink family implements it.
As suggested by Parav Pandit, we also introduce IFLA_PARENT_DEV_BUS_NAME
attribute in order to uniquely identify a device on the system (with
bus/name pair).
ip-link(8) support for the generic parent device attributes will help
us avoid code duplication, so no other link type will require a custom
code to handle the parent name attribute. E.g. the WWAN interface
creation command will looks like this:
$ ip link add wwan0-1 parent-dev wwan0 type wwan channel-id 1
So, some future subsystem (or driver) FOO will have an interface
creation command that looks like this:
$ ip link add foo1-3 parent-dev foo1 type foo bar-id 3 baz-type Y
Below is an example of dumping link info of a random device with these
new attributes:
$ ip --details link show wlp0s20f3
4: wlp0s20f3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DORMANT group default qlen 1000
...
parent_bus pci parent_dev 0000:00:14.3
Co-developed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Co-developed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to make rtnetlink ops that can create different
kinds of devices, like what we want to add to the WWAN
framework, the priv_size and setup parameters aren't quite
sufficient. Make this easier to manage by allowing ops to
allocate their own netdev via an @alloc method that gets
the tb netlink data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled.
The reason is that nsfs tries to access ns->ops but the proc_ns_operations
is not implemented in this case.
[7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010
[7.670268] pgd = 32b54000
[7.670544] [00000010] *pgd=00000000
[7.671861] Internal error: Oops: 5 [#1] SMP ARM
[7.672315] Modules linked in:
[7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 #16
[7.673309] Hardware name: Generic DT based system
[7.673642] PC is at nsfs_evict+0x24/0x30
[7.674486] LR is at clear_inode+0x20/0x9c
The same to tun SIOCGSKNS command.
To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is
disabled. Meanwhile move it to right place net/core/net_namespace.c.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: c62cce2cae ("net: add an ioctl to get a socket network namespace")
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some really really weird switches just couldn't decide whether to use a
normal or a tail tagger, so they just did both.
This creates problems for DSA, because we only have the concept of an
'overhead' which can be applied to the headroom or to the tailroom of
the skb (like for example during the central TX reallocation procedure),
depending on the value of bool tail_tag, but not to both.
We need to generalize DSA to cater for these odd switches by
transforming the 'overhead / tail_tag' pair into 'needed_headroom /
needed_tailroom'.
The DSA master's MTU is increased to account for both.
The flow dissector code is modified such that it only calls the DSA
adjustment callback if the tagger has a non-zero header length.
Taggers are trivially modified to declare either needed_headroom or
needed_tailroom, based on the tail_tag value that they currently
declare.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msg_zerocopy signals if a send operation required copying with a flag
in serr->ee.ee_code.
This field can be incorrect as of the below commit, as a result of
both structs uarg and serr pointing into the same skb->cb[].
uarg->zerocopy must be read before skb->cb[] is reinitialized to hold
serr. Similar to other fields len, hi and lo, use a local variable to
temporarily hold the value.
This was not a problem before, when the value was passed as a function
argument.
Fixes: 75518851a2 ("skbuff: Push status and refcounts into sock_zerocopy_callback")
Reported-by: Talal Ahmad <talalahmad@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit started returning errors when notification info is not
filled by the bridge driver, resulting in the following regression:
# ip link add name br1 type bridge vlan_filtering 1
# bridge vlan add dev br1 vid 555 self pvid untagged
RTNETLINK answers: Invalid argument
As long as the bridge driver does not fill notification info for the
bridge device itself, an empty notification should not be considered as
an error. This is explained in commit 59ccaaaa49 ("bridge: dont send
notification when skb->len == 0 in rtnl_bridge_notify").
Fix by removing the error and add a comment to avoid future bugs.
Fixes: a8db57c1d2 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The WARN_ON() macro takes a condition, it doesn't take a message. Use
WARN() instead.
Fixes: 1897db2ec3 ("devlink: Allow setting tx rate for devlink rate leaf objects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to
fill up the neighbour table with enough entries that it will overflow for
valid connections after that.
This behaviour is more prevalent after commit 58956317c8 ("neighbor:
Improve garbage collection") is applied, as it prevents removal from
entries that are not NUD_FAILED, unless they are more than 5s old.
Fixes: 58956317c8 (neighbor: Improve garbage collection)
Reported-by: Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up to now several high speed NICs have custom mechanisms of recycling
the allocated memory they use for their payloads.
Our page_pool API already has recycling capabilities that are always
used when we are running in 'XDP mode'. So let's tweak the API and the
kernel network stack slightly and allow the recycling to happen even
during the standard operation.
The API doesn't take into account 'split page' policies used by those
drivers currently, but can be extended once we have users for that.
The idea is to be able to intercept the packet on skb_release_data().
If it's a buffer coming from our page_pool API recycle it back to the
pool for further usage or just release the packet entirely.
To achieve that we introduce a bit in struct sk_buff (pp_recycle:1) and
a field in struct page (page->pp) to store the page_pool pointer.
Storing the information in page->pp allows us to recycle both SKBs and
their fragments.
We could have skipped the skb bit entirely, since identical information
can bederived from struct page. However, in an effort to affect the free path
as less as possible, reading a single bit in the skb which is already
in cache, is better that trying to derive identical information for the
page stored data.
The driver or page_pool has to take care of the sync operations on it's own
during the buffer recycling since the buffer is, after opting-in to the
recycling, never unmapped.
Since the gain on the drivers depends on the architecture, we are not
enabling recycling by default if the page_pool API is used on a driver.
In order to enable recycling the driver must call skb_mark_for_recycle()
to store the information we need for recycling in page->pp and
enabling the recycling bit, or page_pool_store_mem_info() for a fragment.
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a prerequisite patch, the next one is enabling recycling of
skbs and fragments. Add an extra argument on __skb_frag_unref() to
handle recycling, and update the current users of the function with that.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed by the page_pool to avoid recycling a page not allocated
via page_pool.
The page->signature field is aliased to page->lru.next and
page->compound_head, but it can't be set by mistake because the
signature value is a bad pointer, and can't trigger a false positive
in PageTail() because the last bit is 0.
Co-developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pktgen_{run, reset, stop}_all_threads() has the same code,
so add pktgen_handle_all_threads() for it.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to previous patch: expose SO_TIMESTAMPING helper so we do not
have to copy & paste this into the mptcp core.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This exports SO_TIMESTAMP_* function for re-use by MPTCP.
Without this there is too much copy & paste needed to support
this from mptcp setsockopt path.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.
Eliminate the follow smatch warning:
net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code
'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor DEVLINK_CMD_RATE_{GET|SET} command handlers to support setting
a node as a parent for another rate object (leaf or node) by means of
new attribute DEVLINK_ATTR_RATE_PARENT_NODE_NAME. Extend devlink ops
with new callbacks rate_{leaf|node}_parent_set() to set node as a parent
for rate object to allow supporting drivers to implement rate grouping
through devlink. Driver implementations are allowed to support leafs
or node children only. Invoking callback with NULL as parent should be
threated by the driver as unset parent action.
Extend rate object struct with reference counter to disallow deleting a
node with any child pointing to it. User should unset parent for the
child explicitly.
Example:
$ devlink port function rate add netdevsim/netdevsim10/group1
$ devlink port function rate add netdevsim/netdevsim10/group2
$ devlink port function rate set netdevsim/netdevsim10/group1 parent group2
$ devlink port function rate show netdevsim/netdevsim10/group1
netdevsim/netdevsim10/group1: type node parent group2
$ devlink port function rate set netdevsim/netdevsim10/group1 noparent
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for DEVLINK_CMD_RATE_{NEW|DEL} commands that are used
to create and delete devlink rate nodes. Add new attribute
DEVLINK_ATTR_RATE_NODE_NAME that specify node name string. The node name
is an alphanumeric identifier. No valid node name can be a devlink port
index, eg. decimal number. Extend devlink ops with new callbacks
rate_node_{new|del}() and rate_node_tx_{share|max}_set() to allow
supporting drivers to implement ports rate grouping and setting tx rate
of rate nodes through devlink.
Expose devlink_rate_nodes_destroy() function to allow vendor driver do
proper cleanup of internally allocated resources for the nodes if the
driver goes down or due to any other reasons which requires nodes to be
destroyed.
Disallow moving device from switchdev to legacy mode if any node exists
on that device. User must explicitly delete nodes before switching mode.
Example:
$ devlink port function rate add netdevsim/netdevsim10/group1
$ devlink port function rate set netdevsim/netdevsim10/group1 \
tx_share 10mbit tx_max 100mbit
Add + set command can be combined:
$ devlink port function rate add netdevsim/netdevsim10/group1 \
tx_share 10mbit tx_max 100mbit
$ devlink port function rate show netdevsim/netdevsim10/group1
netdevsim/netdevsim10/group1: type node tx_share 10mbit tx_max 100mbit
$ devlink port function rate del netdevsim/netdevsim10/group1
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for DEVLINK_CMD_RATE_SET command with new attributes
DEVLINK_ATTR_RATE_TX_{SHARE|MAX} that are used to set devlink rate
shared/max tx rate values. Extend devlink ops with new callbacks
rate_leaf_tx_{share|max}_set() to allow supporting drivers to implement
rate control through devlink.
New attributes are optional. Driver implementations are allowed to
support either or both of them.
Shared rate example:
$ devlink port function rate set netdevsim/netdevsim10/0 tx_share 10mbit
$ devlink port function rate show netdevsim/netdevsim10/0
netdevsim/netdevsim10/0: type leaf tx_share 10mbit
Max rate example:
$ devlink port function rate set netdevsim/netdevsim10/0 tx_max 100mbit
$ devlink port function rate show netdevsim/netdevsim10/0
netdevsim/netdevsim10/0: type leaf tx_max 100mbit
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow registering rate object for devlink ports with dedicated
devlink_rate_leaf_{create|destroy}() API. Implement new netlink
DEVLINK_CMD_RATE_GET command that is used to retrieve rate object info.
Add new DEVLINK_CMD_RATE_{NEW|DEL} commands that are used for
notifications when creating/deleting leaf rate object.
Rate API is intended to be used for rate limiting of individual
devlink ports (leafs) and their aggregates (nodes).
Example:
$ devlink port show
pci/0000:03:00.0/0
pci/0000:03:00.0/1
$ devlink port function rate show
pci/0000:03:00.0/0: type leaf
pci/0000:03:00.0/1: type leaf
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the in-kernel mark setting by doing an additional
sk_dst_reset() which was introduced by commit 50254256f3 ("sock: Reset
dst when changing sk_mark via setsockopt"). The code is now shared to
avoid any further suprises when changing the socket mark value.
Fixes: 84d1c61740 ("net: sock: add sock_set_mark")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
