Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in
the enhanced (650) mode, which we select in `autoconfig_has_efr' with
the ECB bit set in the EFR register, they support the receive interrupt
trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112,
120. This applies to the original OX16C950 discrete UART[1] as well as
950 cores embedded into more complex devices.
For these devices we set the default to 112, which sets an excessively
high level of 112 or 7/8 of the FIFO capacity, unlike with other port
types where we choose at most 1/2 of their respective FIFO capacities.
Additionally we don't make the trigger level configurable. Consequently
frequent input overruns happen with high bit rates where hardware flow
control cannot be used (e.g. terminal applications) even with otherwise
highly-performant systems.
Lower the default receive interrupt trigger level to 32 then, and make
it configurable. Document the trigger levels along with other port
types, including the set of 16, 32, 64, 112 for the transmit interrupt
as well[2].
References:
[1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford
Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger
Levels", p. 22
[2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously a sharing group (shared and master ids pair) can be only
inherited when mount is created via bindmount. This patch adds an
ability to add an existing private mount into an existing sharing group.
With this functionality one can first create the desired mount tree from
only private mounts (without the need to care about undesired mount
propagation or mount creation order implied by sharing group
dependencies), and next then setup any desired mount sharing between
those mounts in tree as needed.
This allows CRIU to restore any set of mount namespaces, mount trees and
sharing group trees for a container.
We have many issues with restoring mounts in CRIU related to sharing
groups and propagation:
- reverse sharing groups vs mount tree order requires complex mounts
reordering which mostly implies also using some temporary mounts
(please see https://lkml.org/lkml/2021/3/23/569 for more info)
- mount() syscall creates tons of mounts due to propagation
- mount re-parenting due to propagation
- "Mount Trap" due to propagation
- "Non Uniform" propagation, meaning that with different tricks with
mount order and temporary children-"lock" mounts one can create mount
trees which can't be restored without those tricks
(see https://www.linuxplumbersconf.org/event/7/contributions/640/)
With this new functionality we can resolve all the problems with
propagation at once.
Link: https://lore.kernel.org/r/20210715100714.120228-1-ptikhomirov@virtuozzo.com
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: lkml <linux-kernel@vger.kernel.org>
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Update the static assertions about siginfo_t to also describe
it's alignment and size.
While investigating if it was possible to add a 64bit field into
siginfo_t[1] it became apparent that the alignment of siginfo_t
is as much a part of the ABI as the size of the structure.
If the alignment changes siginfo_t when embedded in another structure
can move to a different offset. Which is not acceptable from an ABI
structure.
So document that fact and add static assertions to notify developers
if they change change the alignment by accident.
[1] https://lkml.kernel.org/r/YJEZdhe6JGFNYlum@elver.google.com
Acked-by: Marco Elver <elver@google.com>
v1: https://lkml.kernel.org/r/20210505141101.11519-4-ebiederm@xmission.co
Link: https://lkml.kernel.org/r/875yxaxmyl.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Arm Fixed Rate Compression (AFRC) is a proprietary fixed rate image
compression protocol and format.
It is designed to provide guaranteed bandwidth and memory footprint
reductions in graphics and media use-cases.
This patch aims to add modifier definitions for describing
AFRC.
Signed-off-by: Normunds Rieksts <normunds.rieksts@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170709.39922-1-normunds.rieksts@arm.com
The CPU domain should be static for discrete, and on DG1 we don't need
any flushing since everything is already coherent, so really all this
does is an object wait, for which we have an ioctl. Longer term the
desired caching should be an immutable creation time property for the
BO, which can be set with something like gem_create_ext.
One other user is iris + userptr, which uses the set_domain to probe all
the pages to check if the GUP succeeds, however we now have a PROBE
flag for this purpose.
v2: add some more kernel doc, also add the implicit rules with caching
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-5-matthew.auld@intel.com
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
-----BEGIN PGP SIGNATURE-----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=BUya
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15-rc1:
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
The FIXED mapping is only used for ttm, and tells userspace that the
mapping type is pre-defined. This disables the other type of mmap
offsets when discrete memory is used, so fix the selftests as well.
Document the struct as well, so it shows up in docbook.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mauld: Included minor fixes from the review comments]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714122833.766586-1-maarten.lankhorst@linux.intel.com
Add support for the IOAM inline insertion (only for the host-to-host use case)
which is per-route configured with lightweight tunnels. The target is iproute2
and the patch is ready. It will be posted as soon as this patchset is merged.
Here is an overview:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace type 0x800000 ns 1 size 12 dev eth0
This example configures an IOAM Pre-allocated Trace option attached to the
fc00::1/128 prefix. The IOAM namespace (ns) is 1, the size of the pre-allocated
trace data block is 12 octets (size) and only the first IOAM data (bit 0:
hop_limit + node id) is included in the trace (type) represented as a bitfield.
The reason why the in-transit (IPv6-in-IPv6 encapsulation) use case is not
implemented is explained on the patchset cover.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Generic Netlink commands to allow userspace to configure IOAM
namespaces and schemas. The target is iproute2 and the patch is ready.
It will be posted as soon as this patchset is merged. Here is an overview:
$ ip ioam
Usage: ip ioam { COMMAND | help }
ip ioam namespace show
ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ]
ip ioam namespace del ID
ip ioam schema show
ip ioam schema add ID DATA
ip ioam schema del ID
ip ioam namespace set ID schema { ID | none }
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for processing the IOAM Pre-allocated Trace with IPv6,
see [1] and [2]. Introduce a new IPv6 Hop-by-Hop TLV option, see IANA [3].
A new per-interface sysctl is introduced. The value is a boolean to accept (=1)
or ignore (=0, by default) IPv6 IOAM options on ingress for an interface:
- net.ipv6.conf.XXX.ioam6_enabled
Two other sysctls are introduced to define IOAM IDs, represented by an integer.
They are respectively per-namespace and per-interface:
- net.ipv6.ioam6_id
- net.ipv6.conf.XXX.ioam6_id
The value of the first one represents the IOAM ID of the node itself (u32; max
and default value = U32_MAX>>8, due to hop limit concatenation) while the other
represents the IOAM ID of an interface (u16; max and default value = U16_MAX).
Each "ioam6_id" sysctl has a "_wide" equivalent:
- net.ipv6.ioam6_id_wide
- net.ipv6.conf.XXX.ioam6_id_wide
The value of the first one represents the wide IOAM ID of the node itself (u64;
max and default value = U64_MAX>>8, due to hop limit concatenation) while the
other represents the wide IOAM ID of an interface (u32; max and default value
= U32_MAX).
The use of short and wide equivalents is not exclusive, a deployment could
choose to leverage both. For example, net.ipv6.conf.XXX.ioam6_id (short format)
could be an identifier for a physical interface, whereas
net.ipv6.conf.XXX.ioam6_id_wide (wide format) could be an identifier for a
logical sub-interface. Documentation about new sysctls is provided at the end
of this patchset.
Two relativistic hash tables are used: one for IOAM namespaces, the other for
IOAM schemas. A namespace can only have a single active schema and a schema
can only be attached to a single namespace (1:1 relationship).
[1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options
[2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data
[3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch provides the IPv6 IOAM option header [1] as well as the IOAM
Trace header [2]. An IOAM option must be 4n-aligned. Here is an overview of
a Hop-by-Hop with an IOAM Trace option:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next header | Hdr Ext Len | Padding | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Option Type | Opt Data Len | Reserved | IOAM Type |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Namespace-ID | NodeLen | Flags | RemainingLen|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IOAM-Trace-Type | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
| | |
| node data [n] | |
| | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ D
| | a
| node data [n-1] | t
| | a
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
~ ... ~ S
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ p
| | a
| node data [1] | c
| | e
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| | |
| node data [0] | |
| | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
The IOAM option header starts at "Option Type" and ends after "IOAM
Type". The IOAM Trace header starts at "Namespace-ID" and ends after
"IOAM-Trace-Type/Reserved".
IOAM Type: either Pre-allocated Trace (=0), Incremental Trace (=1),
Proof-of-Transit (=2) or Edge-to-Edge (=3). Note that both the
Pre-allocated Trace and the Incremental Trace look the same. The two
others are not implemented.
Namespace-ID: IOAM namespace identifier, not to be confused with network
namespaces. It adds further context to IOAM options and associated data,
and allows devices which are IOAM capable to determine whether IOAM
options must be processed or ignored. It can also be used by an operator
to distinguish different operational domains or to identify different
sets of devices.
NodeLen: Length of data added by each node. It depends on the Trace
Type.
Flags: Only the Overflow (O) flag for now. The O flag is set by a
transit node when there are not enough octets left to record its data.
RemainingLen: Remaining free space to record data.
IOAM-Trace-Type: Bit field where each bit corresponds to a specific kind
of IOAM data. See [2] for a detailed list.
[1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options
[2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the default we assume the traffic to pass, if we have no
matching IPsec policy. With this patch, we have a possibility to
change this default from allow to block. It can be configured
via netlink. Each direction (input/output/forward) can be
configured separately. With the default to block configuered,
we need allow policies for all packet flows we accept.
We do not use default policy lookup for the loopback device.
v1->v2
- fix compiling when XFRM is disabled
- Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Christian Langrock <christian.langrock@secunet.com>
Signed-off-by: Christian Langrock <christian.langrock@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
-----BEGIN PGP SIGNATURE-----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=x8Eo
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
The V3D engine has several hardware performance counters that can of
interest for userspace performance analysis tools.
This exposes new ioctls to create and destroy performance monitor
objects, as well as to query the counter values.
Each created performance monitor object has an ID that can be attached
to CL/CSD submissions, so the driver enables the requested counters when
the job is submitted, and updates the performance monitor values when
the job is done.
It is up to the user to ensure all the jobs have been finished before
getting the performance monitor values. It is also up to the user to
properly synchronize BCL jobs when submitting jobs with different
performance monitors attached.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Emma Anholt <emma@anholt.net>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608111541.461991-1-jasuarez@igalia.com
DCS is an offload to SW load balancing of DC initiator work requests.
A single DCI can be connected to only one target at the time and can't
start new connection until the previous work request is completed. This
limitation will cause to delay when the initiator process needs to
transfer data to multiple targets at the same time. The SW solution is to
use a process that handling and spreading the work request on many DCIs
according to destinations.
This feature is an offload to this process and coming to reduce the load
from the CPU and improve the performance.
Link: https://lore.kernel.org/r/491c2c2afdb5b07de7f03eab3f93cf0704549dbc.1624258894.git.leonro@nvidia.com
Reviewed-by: Meir Lichtinger <meirl@nvidia.com>
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new global vlan option which controls whether multicast snooping
is enabled or disabled for a single vlan. It controls the vlan private
flag: BR_VLFLAG_GLOBAL_MCAST_ENABLED.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new vlan options dump flag which causes only global vlan options
to be dumped. The dumps are done only with bridge devices, ports are
ignored. They support vlan compression if the options in sequential
vlans are equal (currently always true).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can have two types of vlan options depending on context:
- per-device vlan options (split in per-bridge and per-port)
- global vlan options
The second type wasn't supported in the bridge until now, but we need
them for per-vlan multicast support, per-vlan STP support and other
options which require global vlan context. They are contained in the global
bridge vlan context even if the vlan is not configured on the bridge device
itself. This patch adds initial netlink attributes and support for setting
these global vlan options, they can only be set (RTM_NEWVLAN) and the
operation must use the bridge device. Since there are no such options yet
it shouldn't have any functional effect.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the port multicast context to check if the router port is a vlan and
in case it is include its vlan id in the notification.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a global knob that controls if vlan multicast snooping is enabled.
The proper contexts (vlan or bridge-wide) will be chosen based on the knob
when processing packets and changing bridge device state. Note that
vlans have their individual mcast snooping enabled by default, but this
knob is needed to turn on bridge vlan snooping. It is disabled by
default. To enable the knob vlan filtering must also be enabled, it
doesn't make sense to have vlan mcast snooping without vlan filtering
since that would lead to inconsistencies. Disabling vlan filtering will
also automatically disable vlan mcast snooping.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's a noop on DG1, and in the future when need to support other devices
which let us control the coherency, then it should be an immutable
creation time property for the BO. This will likely be controlled
through a new gem_create_ext extension.
v2: add some kernel doc for the discrete changes, and document the
implicit rules
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-2-matthew.auld@intel.com
The Open vSwitch kernel module uses the upcall mechanism to send
packets from kernel space to user space when it misses in the kernel
space flow table. The upcall sends packets via a Netlink socket.
Currently, a Netlink socket is created for every vport. In this way,
there is a 1:1 mapping between a vport and a Netlink socket.
When a packet is received by a vport, if it needs to be sent to
user space, it is sent via the corresponding Netlink socket.
This mechanism, with various iterations of the corresponding user
space code, has seen some limitations and issues:
* On systems with a large number of vports, there is a correspondingly
large number of Netlink sockets which can limit scaling.
(https://bugzilla.redhat.com/show_bug.cgi?id=1526306)
* Packet reordering on upcalls.
(https://bugzilla.redhat.com/show_bug.cgi?id=1844576)
* A thundering herd issue.
(https://bugzilla.redhat.com/show_bug.cgi?id=1834444)
This patch introduces an alternative, feature-negotiated, upcall
mode using a per-cpu dispatch rather than a per-vport dispatch.
In this mode, the Netlink socket to be used for the upcall is
selected based on the CPU of the thread that is executing the upcall.
In this way, it resolves the issues above as:
a) The number of Netlink sockets scales with the number of CPUs
rather than the number of vports.
b) Ordering per-flow is maintained as packets are distributed to
CPUs based on mechanisms such as RSS and flows are distributed
to a single user space thread.
c) Packets from a flow can only wake up one user space thread.
The corresponding user space code can be found at:
https://mail.openvswitch.org/pipermail/ovs-dev/2021-July/385139.html
Bugzilla: https://bugzilla.redhat.com/1844576
Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-07-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 45 non-merge commits during the last 15 day(s) which contain
a total of 52 files changed, 3122 insertions(+), 384 deletions(-).
The main changes are:
1) Introduce bpf timers, from Alexei.
2) Add sockmap support for unix datagram socket, from Cong.
3) Fix potential memleak and UAF in the verifier, from He.
4) Add bpf_get_func_ip helper, from Jiri.
5) Improvements to generic XDP mode, from Kumar.
6) Support for passing xdp_md to XDP programs in bpf_prog_run, from Zvi.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_KPROBE programs,
so it's now possible to call bpf_get_func_ip from both kprobe and
kretprobe programs.
Taking the caller's address from 'struct kprobe::addr', which is
defined for both kprobe and kretprobe.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-5-jolsa@kernel.org
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_TRACING programs,
specifically for all trampoline attach types.
The trampoline's caller IP address is stored in (ctx - 8) address.
so there's no reason to actually call the helper, but rather fixup
the call instruction and return [ctx - 8] value directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-4-jolsa@kernel.org
Introduce 'struct bpf_timer { __u64 :64; __u64 :64; };' that can be embedded
in hash/array/lru maps as a regular field and helpers to operate on it:
// Initialize the timer.
// First 4 bits of 'flags' specify clockid.
// Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, int flags);
// Configure the timer to call 'callback_fn' static function.
long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn);
// Arm the timer to expire 'nsec' nanoseconds from the current time.
long bpf_timer_start(struct bpf_timer *timer, u64 nsec, u64 flags);
// Cancel the timer and wait for callback_fn to finish if it was running.
long bpf_timer_cancel(struct bpf_timer *timer);
Here is how BPF program might look like:
struct map_elem {
int counter;
struct bpf_timer timer;
};
struct {
__uint(type, BPF_MAP_TYPE_HASH);
__uint(max_entries, 1000);
__type(key, int);
__type(value, struct map_elem);
} hmap SEC(".maps");
static int timer_cb(void *map, int *key, struct map_elem *val);
/* val points to particular map element that contains bpf_timer. */
SEC("fentry/bpf_fentry_test1")
int BPF_PROG(test1, int a)
{
struct map_elem *val;
int key = 0;
val = bpf_map_lookup_elem(&hmap, &key);
if (val) {
bpf_timer_init(&val->timer, &hmap, CLOCK_REALTIME);
bpf_timer_set_callback(&val->timer, timer_cb);
bpf_timer_start(&val->timer, 1000 /* call timer_cb2 in 1 usec */, 0);
}
}
This patch adds helper implementations that rely on hrtimers
to call bpf functions as timers expire.
The following patches add necessary safety checks.
Only programs with CAP_BPF are allowed to use bpf_timer.
The amount of timers used by the program is constrained by
the memcg recorded at map creation time.
The bpf_timer_init() helper needs explicit 'map' argument because inner maps
are dynamic and not known at load time. While the bpf_timer_set_callback() is
receiving hidden 'aux->prog' argument supplied by the verifier.
The prog pointer is needed to do refcnting of bpf program to make sure that
program doesn't get freed while the timer is armed. This approach relies on
"user refcnt" scheme used in prog_array that stores bpf programs for
bpf_tail_call. The bpf_timer_set_callback() will increment the prog refcnt which is
paired with bpf_timer_cancel() that will drop the prog refcnt. The
ops->map_release_uref is responsible for cancelling the timers and dropping
prog refcnt when user space reference to a map reaches zero.
This uref approach is done to make sure that Ctrl-C of user space process will
not leave timers running forever unless the user space explicitly pinned a map
that contained timers in bpffs.
bpf_timer_init() and bpf_timer_set_callback() will return -EPERM if map doesn't
have user references (is not held by open file descriptor from user space and
not pinned in bpffs).
The bpf_map_delete_elem() and bpf_map_update_elem() operations cancel
and free the timer if given map element had it allocated.
"bpftool map update" command can be used to cancel timers.
The 'struct bpf_timer' is explicitly __attribute__((aligned(8))) because
'__u64 :64' has 1 byte alignment of 8 byte padding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-4-alexei.starovoitov@gmail.com
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets
in subflow receive buffers longer than necessary, delaying
MPTCP-level ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
- netfilter: conntrack: do not mark RST in the reply direction coming
after SYN packet for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison
-----BEGIN PGP SIGNATURE-----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=QFnb
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski.
"Including fixes from bpf and netfilter.
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack:
- do not renew entry stuck in tcp SYN_SENT state
- do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison"
* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
sfc: add logs explaining XDP_TX/REDIRECT is not available
sfc: ensure correct number of XDP queues
sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
net: fddi: fix UAF in fza_probe
net: dsa: sja1105: fix address learning getting disabled on the CPU port
net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
net: Use nlmsg_unicast() instead of netlink_unicast()
octeontx2-pf: Fix uninitialized boolean variable pps
ipv6: allocate enough headroom in ip6_finish_output2()
net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
net: bridge: multicast: fix MRD advertisement router port marking race
net: bridge: multicast: fix PIM hello router port marking race
net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
dsa: fix for_each_child.cocci warnings
virtio_net: check virtqueue_add_sgs() return value
mptcp: properly account bulk freed memory
selftests: mptcp: fix case multiple subflows limited by server
mptcp: avoid processing packet if a subflow reset
mptcp: fix syncookie process if mptcp can not_accept new subflow
...
Convert all the drm_i915_gem_set_domain bits to proper kernel doc.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-4-matthew.auld@intel.com
Convert all the drm_i915_gem_caching bits to proper kernel doc.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-2-matthew.auld@intel.com
Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"
Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The bdflush system call has been deprecated for a very long time.
Recently Michael Schmitz tested[1] and found that the last known
caller of of the bdflush system call is unaffected by it's removal.
Since the code is not needed delete it.
[1] https://lkml.kernel.org/r/36123b5d-daa0-6c2b-f2d4-a942f069fd54@gmail.com
Link: https://lkml.kernel.org/r/87sg10quue.fsf_-_@disp2133
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Commit 48d6b3336a ("RDMA/irdma: Add ABI definitions") adds
./include/uapi/rdma/irdma-abi.h with an additional unneeded closing
bracket at the end of the SPDX-License-Identifier line.
Hence, ./scripts/spdxcheck.py complains:
include/uapi/rdma/irdma-abi.h: 1:77 Syntax error: )
Remove that closing bracket to make spdxcheck.py happy.
Fixes: 48d6b3336a ("RDMA/irdma: Add ABI definitions")
Link: https://lore.kernel.org/r/20210701104127.1877-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix typo in a define: CEC_OP_REC_SEQ_SATERDAY -> CEC_OP_REC_SEQ_SATURDAY
This isn't used yet in actual applications to the best of my knowledge,
and it certainly doesn't break the ABI since the value doesn't change.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmDnGVYQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpv6UEAC78zkseI8TmKaowNfkz/+MkP9eSFb1pVn3
rxpbPOsZompHoZpeWt4oHL+3Rmm3a9iRo/APA2ELas4zvp+Q+6uG7eha2Dc4hUA9
YgeO4z9YfG8wQNZc3x7bncb6ZwqEE5nnbFe/m25SyrAZVLlZ7FKHxfoZDqjhlGFC
eLNiYO6vdvwgCoBMcotyCDttrPfEu6947/5vB1zevv57twdQQaEWGUhvyx1XrlDX
0YD5fmdOjNU2isgxt4xo2Ur2zL6w254/hvj58sV3Z7JfkJpI9DCK+ztKEfzuyEhA
WYz06rDAT1+1KuVLfowaZ+pYiPPOIsL0+QXI83r3nLaE7WGGlfS8Hmz//1FbziYs
ZSZI826kEN+/lKeWTcKOOMhmkYyXEFFuQZS34eg9KI4xwML8v+ILlHmcp+tjebw9
vzNF6f7N2ki+jnyxxyNxeMHxeAMWsqnIRROOhZg6bbs6UVNpDy4qRzpQaDOaJsVe
uSAQ6PTd/etR9KE+ClhLe6X7Rmp/lfZCPe64wqM/3k1qV2KWhE1fwCQO4c5o1MBN
rpk3Ef5PZYP3aakCvZnfcjMWlpZNbq/xMc6vPc+yq32akq1t1KbODVBiR5odcH0C
Gt5N11im50SO06haBt7EOe4JMQLbK5sxG15t4C6mNQZgPegGfaLlVkKpzIkOzUha
OkRofKMcDA==
=gHse
-----END PGP SIGNATURE-----
Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
Doorbell remapping for ifcvf, mlx5.
virtio_vdpa support for mlx5.
Validate device input in several drivers (for SEV and friends).
ZONE_MOVABLE aware handling in virtio-mem.
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmDm5jQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp6mYIAMTk5ggM5xdt6NCAASAigssEAoCTMorfoxkx
i7O562TEejgLvYKx/EZnYF+YpmYGyWEY9AgxMPxP/nPRLszuf0nZSmMp5ivu/vMz
zwpAto+7RpUmIQP+N6QjWabiWrpQI9EnXA47kOnyU703Y+RnITPNCvD1PpnDG3zs
W2GdH7DKqwsCY22hB+zboH2D6HNf3gTuUtgUBYbdBnYVxdOsSd1dx9Te0EKUTV3y
uvENmFEcushDRYpUhAsZm4bKcLOn+6rgNGXuXNa4R/hUlJTwrQjGmzu+ua6vfMwF
dcGxdaeMJUo8o0C1Pz7wJBXF5UZXQlxoyBP+0b0ZTm69AwmIHMY=
=o6A1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio,vhost,vdpa updates from Michael Tsirkin:
- Doorbell remapping for ifcvf, mlx5
- virtio_vdpa support for mlx5
- Validate device input in several drivers (for SEV and friends)
- ZONE_MOVABLE aware handling in virtio-mem
- Misc fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-mem: prioritize unplug from ZONE_MOVABLE in Big Block Mode
virtio-mem: simplify high-level unplug handling in Big Block Mode
virtio-mem: prioritize unplug from ZONE_MOVABLE in Sub Block Mode
virtio-mem: simplify high-level unplug handling in Sub Block Mode
virtio-mem: simplify high-level plug handling in Sub Block Mode
virtio-mem: use page_zonenum() in virtio_mem_fake_offline()
virtio-mem: don't read big block size in Sub Block Mode
virtio/vdpa: clear the virtqueue state during probe
vp_vdpa: allow set vq state to initial state after reset
virtio-pci library: introduce vp_modern_get_driver_features()
vdpa: support packed virtqueue for set/get_vq_state()
virtio-ring: store DMA metadata in desc_extra for split virtqueue
virtio: use err label in __vring_new_virtqueue()
virtio_ring: introduce virtqueue_desc_add_split()
virtio_ring: secure handling of mapping errors
virtio-ring: factor out desc_extra allocation
virtio_ring: rename vring_desc_extra_packed
virtio-ring: maintain next in extra state for packed virtqueue
vdpa/mlx5: Clear vq ready indication upon device reset
vdpa/mlx5: Add support for doorbell bypassing
...
- Support for optimized routines based on the host CPU
- Support for PCI via virtio
- Various fixes
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmDnZwAWHHJpY2hhcmRA
c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wW1BD/9SHWGYhxLY+xL27eO0Q8XOPePb
diqllGavzq3fcakmJ3+6iIpb/WYX0ztu1M4KMBRP3QxNjP6nFkS1ph3PC0LL3ec2
h23hRfOrhlQd4rdonPcq/Z7oXKhrkem9G6KneVfvB94HmXnaZIrNBjwQRy0uRMXE
/IVNH4o6YMR8Av/VrG+L6BS+O/oXVnYVSLOuXsIrxmxS24NybsOpRzHvl14ZUsHt
eiwzcRC3ugAaxJn8cOSrHdBwvdOgbFFWEtMITcesQpYru+EmQcsCZdmJ0DbwsV2e
9k+LrVoy0CZFoekBtaaFvZq+JVBjUZKoAUYBML4ejWnQKolJH0BZQRh4RT0rbTjc
UMiuE3kFUsdJjzJRyO4pcqpwaNhCiZ2XrwyKeev/FLIn95bD1xbLJWfRvoKhioiI
X+1vujN2+N5n8T+u8sCVohujJCkUkMjevfF6ew8rvYOj3FrGqTi4jgrXUFAIsjLa
mHdA92oHIjNOCjyVIqnoUFTDltVMW9CwnLtd5nPnGvJoMtsj7lthy6fdtdPH0WVu
iNR4toE/AjBJo4rtib/irYbZtqmw2AbBFqoRk4yj8Fw4ZdSPYELwAR1aah0Oce9R
t1T9OE66vlr28XIC0NF917JfSNkc2eXnx4B21Zh+a/68XSJ1FzXPTob3lvXVVhQR
Ou4aw6dH7mql/2bq1w==
=wAww
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Support for optimized routines based on the host CPU
- Support for PCI via virtio
- Various fixes
* tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: remove unneeded semicolon in um_arch.c
um: Remove the repeated declaration
um: fix error return code in winch_tramp()
um: fix error return code in slip_open()
um: Fix stack pointer alignment
um: implement flush_cache_vmap/flush_cache_vunmap
um: add a UML specific futex implementation
um: enable the use of optimized xor routines in UML
um: Add support for host CPU flags and alignment
um: allow not setting extra rpaths in the linux binary
um: virtio/pci: enable suspend/resume
um: add PCI over virtio emulation driver
um: irqs: allow invoking time-travel handler multiple times
um: time-travel/signals: fix ndelay() in interrupt
um: expose time-travel mode to userspace side
um: export signals_enabled directly
um: remove unused smp_sigio_handler() declaration
lib: add iomem emulation (logic_iomem)
um: allow disabling NO_IOMEM
Pull yet more updates from Andrew Morton:
"54 patches.
Subsystems affected by this patch series: lib, mm (slub, secretmem,
cleanups, init, pagemap, and mremap), and debug"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (54 commits)
powerpc/mm: enable HAVE_MOVE_PMD support
powerpc/book3s64/mm: update flush_tlb_range to flush page walk cache
mm/mremap: allow arch runtime override
mm/mremap: hold the rmap lock in write mode when moving page table entries.
mm/mremap: use pmd/pud_poplulate to update page table entries
mm/mremap: don't enable optimized PUD move if page table levels is 2
mm/mremap: convert huge PUD move to separate helper
selftest/mremap_test: avoid crash with static build
selftest/mremap_test: update the test to handle pagesize other than 4K
mm: rename p4d_page_vaddr to p4d_pgtable and make it return pud_t *
mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *
kdump: use vmlinux_build_id to simplify
buildid: fix kernel-doc notation
buildid: mark some arguments const
scripts/decode_stacktrace.sh: indicate 'auto' can be used for base path
scripts/decode_stacktrace.sh: silence stderr messages from addr2line/nm
scripts/decode_stacktrace.sh: support debuginfod
x86/dumpstack: use %pSb/%pBb for backtrace printing
arm64: stacktrace: use %pSb for backtrace printing
module: add printk formats to add module build ID to stacktraces
...
Introduce "memfd_secret" system call with the ability to create memory
areas visible only in the context of the owning process and not mapped not
only to other processes but in the kernel page tables as well.
The secretmem feature is off by default and the user must explicitly
enable it at the boot time.
Once secretmem is enabled, the user will be able to create a file
descriptor using the memfd_secret() system call. The memory areas created
by mmap() calls from this file descriptor will be unmapped from the kernel
direct map and they will be only mapped in the page table of the processes
that have access to the file descriptor.
Secretmem is designed to provide the following protections:
* Enhanced protection (in conjunction with all the other in-kernel
attack prevention systems) against ROP attacks. Seceretmem makes
"simple" ROP insufficient to perform exfiltration, which increases the
required complexity of the attack. Along with other protections like
the kernel stack size limit and address space layout randomization which
make finding gadgets is really hard, absence of any in-kernel primitive
for accessing secret memory means the one gadget ROP attack can't work.
Since the only way to access secret memory is to reconstruct the missing
mapping entry, the attacker has to recover the physical page and insert
a PTE pointing to it in the kernel and then retrieve the contents. That
takes at least three gadgets which is a level of difficulty beyond most
standard attacks.
* Prevent cross-process secret userspace memory exposures. Once the
secret memory is allocated, the user can't accidentally pass it into the
kernel to be transmitted somewhere. The secreremem pages cannot be
accessed via the direct map and they are disallowed in GUP.
* Harden against exploited kernel flaws. In order to access secretmem,
a kernel-side attack would need to either walk the page tables and
create new ones, or spawn a new privileged uiserspace process to perform
secrets exfiltration using ptrace.
The file descriptor based memory has several advantages over the
"traditional" mm interfaces, such as mlock(), mprotect(), madvise(). File
descriptor approach allows explicit and controlled sharing of the memory
areas, it allows to seal the operations. Besides, file descriptor based
memory paves the way for VMMs to remove the secret memory range from the
userspace hipervisor process, for instance QEMU. Andy Lutomirski says:
"Getting fd-backed memory into a guest will take some possibly major
work in the kernel, but getting vma-backed memory into a guest without
mapping it in the host user address space seems much, much worse."
memfd_secret() is made a dedicated system call rather than an extension to
memfd_create() because it's purpose is to allow the user to create more
secure memory mappings rather than to simply allow file based access to
the memory. Nowadays a new system call cost is negligible while it is way
simpler for userspace to deal with a clear-cut system calls than with a
multiplexer or an overloaded syscall. Moreover, the initial
implementation of memfd_secret() is completely distinct from
memfd_create() so there is no much sense in overloading memfd_create() to
begin with. If there will be a need for code sharing between these
implementation it can be easily achieved without a need to adjust user
visible APIs.
The secret memory remains accessible in the process context using uaccess
primitives, but it is not exposed to the kernel otherwise; secret memory
areas are removed from the direct map and functions in the
follow_page()/get_user_page() family will refuse to return a page that
belongs to the secret memory area.
Once there will be a use case that will require exposing secretmem to the
kernel it will be an opt-in request in the system call flags so that user
would have to decide what data can be exposed to the kernel.
Removing of the pages from the direct map may cause its fragmentation on
architectures that use large pages to map the physical memory which
affects the system performance. However, the original Kconfig text for
CONFIG_DIRECT_GBPAGES said that gigabyte pages in the direct map "... can
improve the kernel's performance a tiny bit ..." (commit 00d1c5e057
("x86: add gbpages switches")) and the recent report [1] showed that "...
although 1G mappings are a good default choice, there is no compelling
evidence that it must be the only choice". Hence, it is sufficient to
have secretmem disabled by default with the ability of a system
administrator to enable it at boot time.
Pages in the secretmem regions are unevictable and unmovable to avoid
accidental exposure of the sensitive data via swap or during page
migration.
Since the secretmem mappings are locked in memory they cannot exceed
RLIMIT_MEMLOCK. Since these mappings are already locked independently
from mlock(), an attempt to mlock()/munlock() secretmem range would fail
and mlockall()/munlockall() will ignore secretmem mappings.
However, unlike mlock()ed memory, secretmem currently behaves more like
long-term GUP: secretmem mappings are unmovable mappings directly consumed
by user space. With default limits, there is no excessive use of
secretmem and it poses no real problem in combination with
ZONE_MOVABLE/CMA, but in the future this should be addressed to allow
balanced use of large amounts of secretmem along with ZONE_MOVABLE/CMA.
A page that was a part of the secret memory area is cleared when it is
freed to ensure the data is not exposed to the next user of that page.
The following example demonstrates creation of a secret mapping (error
handling is omitted):
fd = memfd_secret(0);
ftruncate(fd, MAP_SIZE);
ptr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, 0);
[1] https://lore.kernel.org/linux-mm/213b4567-46ce-f116-9cdf-bbd0c884eb3c@linux.intel.com/
[akpm@linux-foundation.org: suppress Kconfig whine]
Link: https://lkml.kernel.org/r/20210518072034.31572-5-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This API allows one context to grab bits out of another context upon
creation. It can be used as a short-cut for setparam(getparam()) for
things like I915_CONTEXT_PARAM_VM. However, it's never been used by any
real userspace. It's used by a few IGT tests and that's it. Since it
doesn't add any real value (most of the stuff you can CLONE you can copy
in other ways), drop it.
There is one thing that this API allows you to clone which you cannot
clone via getparam/setparam: timelines. However, timelines are an
implementation detail of i915 and not really something that needs to be
exposed to userspace. Also, sharing timelines between contexts isn't
obviously useful and supporting it has the potential to complicate i915
internally. It also doesn't add any functionality that the client can't
get in other ways. If a client really wants a shared timeline, they can
use a syncobj and set it as an in and out fence on every submit.
v2 (Jason Ekstrand):
- More detailed commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-7-jason@jlekstrand.net
The idea behind this param is to support OpenCL drivers with relocations
because OpenCL reserves 0x0 for NULL and, if we placed memory there, it
would confuse CL kernels. It was originally sent out as part of a patch
series including libdrm [1] and Beignet [2] support. However, the
libdrm and Beignet patches never landed in their respective upstream
projects so this API has never been used. It's never been used in Mesa
or any other driver, either.
Dropping this API allows us to delete a small bit of code.
[1]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067030.html
[2]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067031.html
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-4-jason@jlekstrand.net
This reverts commit 88be76cdaf ("drm/i915: Allow userspace to specify
ringsize on construction"). This API was originally added for OpenCL
but the compute-runtime PR has sat open for a year without action so we
can still pull it out if we want. I argue we should drop it for three
reasons:
1. If the compute-runtime PR has sat open for a year, this clearly
isn't that important.
2. It's a very leaky API. Ring size is an implementation detail of the
current execlist scheduler and really only makes sense there. It
can't apply to the older ring-buffer scheduler on pre-execlist
hardware because that's shared across all contexts and it won't
apply to the GuC scheduler that's in the pipeline.
3. Having userspace set a ring size in bytes is a bad solution to the
problem of having too small a ring. There is no way that userspace
has the information to know how to properly set the ring size so
it's just going to detect the feature and always set it to the
maximum of 512K. This is what the compute-runtime PR does. The
scheduler in i915, on the other hand, does have the information to
make an informed choice. It could detect if the ring size is a
problem and grow it itself. Or, if that's too hard, we could just
increase the default size from 16K to 32K or even 64K instead of
relying on userspace to do it.
Let's drop this API for now and, if someone decides they really care
about solving this problem, they can do it properly.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-2-jason@jlekstrand.net
Support passing a xdp_md via ctx_in/ctx_out in bpf_attr for
BPF_PROG_TEST_RUN.
The intended use case is to pass some XDP meta data to the test runs of
XDP programs that are used as tail calls.
For programs that use bpf_prog_test_run_xdp, support xdp_md input and
output. Unlike with an actual xdp_md during a non-test run, data_meta must
be 0 because it must point to the start of the provided user data. From
the initial xdp_md, use data and data_end to adjust the pointers in the
generated xdp_buff. All other non-zero fields are prohibited (with
EINVAL). If the user has set ctx_out/ctx_size_out, copy the (potentially
different) xdp_md back to the userspace.
We require all fields of input xdp_md except the ones we explicitly
support to be set to zero. The expectation is that in the future we might
add support for more fields and we want to fail explicitly if the user
runs the program on the kernel where we don't yet support them.
Co-developed-by: Cody Haas <chaas@riotgames.com>
Co-developed-by: Lisa Watanabe <lwatanabe@riotgames.com>
Signed-off-by: Cody Haas <chaas@riotgames.com>
Signed-off-by: Lisa Watanabe <lwatanabe@riotgames.com>
Signed-off-by: Zvi Effron <zeffron@riotgames.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210707221657.3985075-3-zeffron@riotgames.com
- Prevent sigaltstack out of bounds writes. The kernel unconditionally
writes the FPU state to the alternate stack without checking whether
the stack is large enough to accomodate it.
Check the alternate stack size before doing so and in case it's too
small force a SIGSEGV instead of silently corrupting user space data.
- MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never been
updated despite the fact that the FPU state which is stored on the
signal stack has grown over time which causes trouble in the field
when AVX512 is available on a CPU. The kernel does not expose the
minimum requirements for the alternate stack size depending on the
available and enabled CPU features.
ARM already added an aux vector AT_MINSIGSTKSZ for the same reason.
Add it to x86 as well
- A major cleanup of the x86 FPU code. The recent discoveries of XSTATE
related issues unearthed quite some inconsistencies, duplicated code
and other issues.
The fine granular overhaul addresses this, makes the code more robust
and maintainable, which allows to integrate upcoming XSTATE related
features in sane ways.
-----BEGIN PGP SIGNATURE-----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=Mq1m
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
"Fixes and improvements for FPU handling on x86:
- Prevent sigaltstack out of bounds writes.
The kernel unconditionally writes the FPU state to the alternate
stack without checking whether the stack is large enough to
accomodate it.
Check the alternate stack size before doing so and in case it's too
small force a SIGSEGV instead of silently corrupting user space
data.
- MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never
been updated despite the fact that the FPU state which is stored on
the signal stack has grown over time which causes trouble in the
field when AVX512 is available on a CPU. The kernel does not expose
the minimum requirements for the alternate stack size depending on
the available and enabled CPU features.
ARM already added an aux vector AT_MINSIGSTKSZ for the same reason.
Add it to x86 as well.
- A major cleanup of the x86 FPU code. The recent discoveries of
XSTATE related issues unearthed quite some inconsistencies,
duplicated code and other issues.
The fine granular overhaul addresses this, makes the code more
robust and maintainable, which allows to integrate upcoming XSTATE
related features in sane ways"
* tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
x86/fpu/xstate: Clear xstate header in copy_xstate_to_uabi_buf() again
x86/fpu/signal: Let xrstor handle the features to init
x86/fpu/signal: Handle #PF in the direct restore path
x86/fpu: Return proper error codes from user access functions
x86/fpu/signal: Split out the direct restore code
x86/fpu/signal: Sanitize copy_user_to_fpregs_zeroing()
x86/fpu/signal: Sanitize the xstate check on sigframe
x86/fpu/signal: Remove the legacy alignment check
x86/fpu/signal: Move initial checks into fpu__restore_sig()
x86/fpu: Mark init_fpstate __ro_after_init
x86/pkru: Remove xstate fiddling from write_pkru()
x86/fpu: Don't store PKRU in xstate in fpu_reset_fpstate()
x86/fpu: Remove PKRU handling from switch_fpu_finish()
x86/fpu: Mask PKRU from kernel XRSTOR[S] operations
x86/fpu: Hook up PKRU into ptrace()
x86/fpu: Add PKRU storage outside of task XSAVE buffer
x86/fpu: Dont restore PKRU in fpregs_restore_userspace()
x86/fpu: Rename xfeatures_mask_user() to xfeatures_mask_uabi()
x86/fpu: Move FXSAVE_LEAK quirk info __copy_kernel_to_fpregs()
x86/fpu: Rename __fpregs_load_activate() to fpregs_restore_userregs()
...
nf_conntrack_netlink.h does not exist, refer to nfnetlink_conntrack.h instead.
Signed-off-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYORvYQAKCRDh3BK/laaZ
PCfvAQCbU+PW2RbwlqjZMet6w9qorh29XYe786P5pNRVbMYCygD+N45l66Sbd/Rz
7M7ioVDseyTW4dnLhb8SzSNB0zr6jQs=
=MDvD
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fixes for virtiofs submounts
- Misc fixes and cleanups
* tag 'fuse-update-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: Fix spelling mistakes
fuse: use DIV_ROUND_UP helper macro for calculations
fuse: fix illegal access to inode with reused nodeid
fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)
fuse: Make fuse_fill_super_submount() static
fuse: Switch to fc_mount() for submounts
fuse: Call vfs_get_tree() for submounts
fuse: add dedicated filesystem context ops for submounts
virtiofs: propagate sync() to file server
fuse: reject internal errno
fuse: check connected before queueing on fpq->io
fuse: ignore PG_workingset after stealing
fuse: Fix infinite loop in sget_fc()
fuse: Fix crash if superblock of submount gets killed early
fuse: Fix crash in fuse_dentry_automount() error path
Here is the big set of tty and serial driver patches for 5.14-rc1.
A bit more than normal, but nothing major, lots of cleanups. Highlights
are:
- lots of tty api cleanups and mxser driver cleanups from Jiri
- build warning fixes
- various serial driver updates
- coding style cleanups
- various tty driver minor fixes and updates
- removal of broken and disable r3964 line discipline (finally!)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM4qQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylKvQCfbh+OmTkDlDlDhSWlxuV05M1XTXoAoLUcLZru
s5JCnwSZztQQLMDHj7Pd
=Zupm
-----END PGP SIGNATURE-----
Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.14-rc1.
A bit more than normal, but nothing major, lots of cleanups.
Highlights are:
- lots of tty api cleanups and mxser driver cleanups from Jiri
- build warning fixes
- various serial driver updates
- coding style cleanups
- various tty driver minor fixes and updates
- removal of broken and disable r3964 line discipline (finally!)
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
serial: mvebu-uart: remove unused member nb from struct mvebu_uart
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
dt-bindings: mvebu-uart: fix documentation
serial: mvebu-uart: correctly calculate minimal possible baudrate
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: fix calculation of clock divisor
tty: make linux/tty_flip.h self-contained
serial: Prefer unsigned int to bare use of unsigned
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
serial: qcom_geni_serial: use DT aliases according to DT bindings
Revert "tty: serial: Add UART driver for Cortina-Access platform"
tty: serial: Add UART driver for Cortina-Access platform
MAINTAINERS: add me back as mxser maintainer
mxser: Documentation, fix typos
mxser: Documentation, make the docs up-to-date
mxser: Documentation, remove traces of callout device
mxser: introduce mxser_16550A_or_MUST helper
mxser: rename flags to old_speed in mxser_set_serial_info
mxser: use port variable in mxser_set_serial_info
mxser: access info->MCR under info->slock
...
Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanna driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems mushed
together" tree...
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM8jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymECgCg0yL+8WxDKO5Gg5llM5PshvLB1rQAn0y5pDgg
nw78LV3HQ0U7qaZBtI91
=x+AR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
- Add support for the CXL Fixed Memory Window Structure, a recent
extension of the ACPI CEDT (CXL Early Discovery Table)
- Add infrastructure for component registers
- Add HDM (Host-managed device memory) decoder definitions
- Define a device model for an HDM decoder tree
- Bridge CXL persistent memory capabilities to an NVDIMM bus /
device-model
- Switch to fine grained mapping of CXL MMIO registers to allow
different drivers / system software to own individual register blocks
- Enable media provisioning commands, and publish the label storage area
size in sysfs
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYOB2lAAKCRDfioYZHlFs
ZyyaAP9O+SnYflFX+3gpoU4pK92VbIUl9KzzHdvJdW2CqtEVMgD9GO4V2Ng17WFg
/Mzn9Mj9S+YaHYvOsN6qEF1V0QvqNQ4=
=+X3m
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"This subsystem is still in the build-out phase as the bulk of the
update is improvements to enumeration and fleshing out the device
model. In terms of new features, more mailbox commands have been added
to the allowed-list in support of persistent memory provisioning
support targeting v5.15.
The critical update from an enumeration perspective is support for the
CXL Fixed Memory Window Structure that indicates to Linux which system
physical address ranges decode to the CXL Host Bridges in the system.
This allows the driver to detect which address ranges have been mapped
by firmware and what address ranges are available for future hotplug.
So, again, mostly skeleton this round, with more meat targeting v5.15.
Summary:
- Add support for the CXL Fixed Memory Window Structure, a recent
extension of the ACPI CEDT (CXL Early Discovery Table)
- Add infrastructure for component registers
- Add HDM (Host-managed device memory) decoder definitions
- Define a device model for an HDM decoder tree
- Bridge CXL persistent memory capabilities to an NVDIMM bus /
device-model
- Switch to fine grained mapping of CXL MMIO registers to allow
different drivers / system software to own individual register
blocks
- Enable media provisioning commands, and publish the label storage
area size in sysfs
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
cxl/pci: Rename CXL REGLOC ID
cxl/acpi: Use the ACPI CFMWS to create static decoder objects
cxl/acpi: Add the Host Bridge base address to CXL port objects
cxl/pmem: Register 'pmem' / cxl_nvdimm devices
libnvdimm: Drop unused device power management support
libnvdimm: Export nvdimm shutdown helper, nvdimm_delete()
cxl/pmem: Add initial infrastructure for pmem support
cxl/core: Add cxl-bus driver infrastructure
cxl/pci: Add media provisioning required commands
cxl/component_regs: Fix offset
cxl/hdm: Fix decoder count calculation
cxl/acpi: Introduce cxl_decoder objects
cxl/acpi: Enumerate host bridge root ports
cxl/acpi: Add downstream port data to cxl_port instances
cxl/Kconfig: Default drivers to CONFIG_CXL_BUS
cxl/acpi: Introduce the root of a cxl_port topology
cxl/pci: Fixup devm_cxl_iomap_block() to take a 'struct device *'
cxl/pci: Add HDM decoder capabilities
cxl/pci: Reserve individual register block regions
cxl/pci: Map registers based on capabilities
...
As the diffstat scatters over the tree, we've got many tree-wide
small changes, but also got quite a few intrusive changes in the
core side. The only ABI-visible core change is the new rawmidi
framing mode support while others are kernel-internal, mostly code
refactoring and/or nice improvements.
Here are some highlights:
Core:
- A new framing access mode for rawmidi to get timestamps
- Cleanup / refactoring of buffer memory management helper code
- Support for automatic negotiation of ASoC DAI formats
- Revival of software suspend for PCM and control core, as a
preliminary work for PCI BAR rescan support
ASoC:
- Accessory detection support for several Qualcomm parts
- Support for IEC958 control with hdmi-codec
- Merging of Tegra machine drivers into a single driver
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
USB-audio:
- Reduction of latency at playback start
- Code cleanup / fixes of usx2y driver
- Scarlett2 mixer code fixes and enhancements
- Quirks for Ozone and Denon devices
HD-audio:
- A few quirks for HP and ASUS machines
- Display power management fixes
Others:
- FireWire code refactoring and enhancements
- Tree-wide trivial coding-style fixes
-----BEGIN PGP SIGNATURE-----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=IN9G
-----END PGP SIGNATURE-----
Merge tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat scatters over the tree, we've got many tree-wide small
changes, but also got quite a few intrusive changes in the core side.
The only ABI-visible core change is the new rawmidi framing mode
support while others are kernel-internal, mostly code refactoring
and/or nice improvements.
Here are some highlights:
Core:
- A new framing access mode for rawmidi to get timestamps
- Cleanup / refactoring of buffer memory management helper code
- Support for automatic negotiation of ASoC DAI formats
- Revival of software suspend for PCM and control core, as a
preliminary work for PCI BAR rescan support
ASoC:
- Accessory detection support for several Qualcomm parts
- Support for IEC958 control with hdmi-codec
- Merging of Tegra machine drivers into a single driver
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
USB-audio:
- Reduction of latency at playback start
- Code cleanup / fixes of usx2y driver
- Scarlett2 mixer code fixes and enhancements
- Quirks for Ozone and Denon devices
HD-audio:
- A few quirks for HP and ASUS machines
- Display power management fixes
Others:
- FireWire code refactoring and enhancements
- Tree-wide trivial coding-style fixes"
* tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
ALSA: usb-audio: scarlett2: Fix for loop increment in scarlett2_usb_get_config
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
ALSA: hda/realtek - Add ALC285 HP init procedure
ALSA: hda/realtek - Add type for ALC287
ALSA: scarlett2: Fix scarlett2_*_ctl_put() return values again
ALSA: scarlett2: Fix pad count for 18i8 Gen 3
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
ALSA: hda: Release codec display power during shutdown/reboot
ALSA: hda: Release controller display power during shutdown/reboot
ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
ASoC: fsl: remove unnecessary oom message
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tegra30: ahub: Use devm_platform_get_and_ioremap_resource()
ASoC: tegra: tegra210_admaif: Use devm_platform_get_and_ioremap_resource()
...
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
This PR contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that can do
ROCE. Otherwise this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide refcount_t
conversion
- Several series for the hns driver, more HIP09 HW capabilities, migration
to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use DEVICE_ATTR_*,
make the ib_port sysfs first-class, and overall use sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support
-----BEGIN PGP SIGNATURE-----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=wyqt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that
can do ROCE.
Other than that, this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide
refcount_t conversion
- Several series for the hns driver, more HIP09 HW capabilities,
migration to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use
DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
RDMA/core: Always release restrack object
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
RDMA/rxe: Missing unlock on error in get_srq_wqe()
RDMA/cma: Fix rdma_resolve_route() memory leak
RDMA/core/sa_query: Remove unused argument
RDMA/cma: Fix incorrect Packet Lifetime calculation
RDMA/cma: Protect RMW with qp_mutex
RDMA/cma: Remove unnecessary INIT->INIT transition
RDMA/hns: Add window selection field of congestion control
RDMA/hfi1: Remove use of kmap()
RDMA/irdma: Remove use of kmap()
RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
IB/isert: Align target max I/O size to initiator size
RDMA/hns: Fix incorrect vlan enable bit in QPC
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/irdma: Use the queried port attributes
RDMA/rxe: Fix redundant skb_put_zero
RDMA/rxe: Fix extra copy in prepare_ack_packet
...
Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.
This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.
This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an interface for getting PHC (PTP Hardware Clock)
virtual clocks, which are based on PHC physical clock
providing hardware timestamp to network packets.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmDcl7AACgkQnJ2qBz9k
QNnsBQf+LBAPsfykQ/f8EdHErO1lfbVTmwf2g/JzTkjrIVZTZ6Ic47aCIiFxgHU2
Js9ufaPxpsbbopzpn2PAoCUzxNsZDqgXtnC03MOUAqoSFbAvgLHz2sQwjqeYJUGQ
P6n7VipEA/qBVpQI5zeCUhHYcahoNrRjSLzaFnE2Z8CrQYQ6Ry9gVEhduvu2OTru
62cWlAWlTJfx/FcR1Y0F/ZznnNSKMiAHcEe3F6Beztplg2ooq+z6FclJYrkmnxMq
SXSOsqTCdi1/oFx36NpvLkykrIS9I7N/iqCnKwbm6X+nyZZKyAwYZhWVqkbozPPu
+u1Ppq8o0IuWwEA6/UAmxgAO3m/Gkw==
=tn0h
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc fs updates from Jan Kara:
"The new quotactl_fd() syscall (remake of quotactl_path() syscall that
got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs,
isofs, and writeback fixes and cleanups"
* tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: fix obtain a reference to a freeing memcg css
quota: remove unnecessary oom message
isofs: remove redundant continue statement
quota: Wire up quotactl_fd syscall
quota: Change quotactl_path() systcall to an fd-based one
reiserfs: Remove unneed check in reiserfs_write_full_page()
udf: Fix NULL pointer dereference in udf_symlink function
reiserfs: add check for invalid 1st journal block
I. Background: Sparse Memory Mappings
When we manage sparse memory mappings dynamically in user space - also
sometimes involving MAP_NORESERVE - we want to dynamically populate/
discard memory inside such a sparse memory region. Example users are
hypervisors (especially implementing memory ballooning or similar
technologies like virtio-mem) and memory allocators. In addition, we want
to fail in a nice way (instead of generating SIGBUS) if populating does
not succeed because we are out of backend memory (which can happen easily
with file-based mappings, especially tmpfs and hugetlbfs).
While MADV_DONTNEED, MADV_REMOVE and FALLOC_FL_PUNCH_HOLE allow for
reliably discarding memory for most mapping types, there is no generic
approach to populate page tables and preallocate memory.
Although mmap() supports MAP_POPULATE, it is not applicable to the concept
of sparse memory mappings, where we want to populate/discard dynamically
and avoid expensive/problematic remappings. In addition, we never
actually report errors during the final populate phase - it is best-effort
only.
fallocate() can be used to preallocate file-based memory and fail in a
safe way. However, it cannot really be used for any private mappings on
anonymous files via memfd due to COW semantics. In addition, fallocate()
does not actually populate page tables, so we still always get pagefaults
on first access - which is sometimes undesired (i.e., real-time workloads)
and requires real prefaulting of page tables, not just a preallocation of
backend storage. There might be interesting use cases for sparse memory
regions along with mlockall(MCL_ONFAULT) which fallocate() cannot satisfy
as it does not prefault page tables.
II. On preallcoation/prefaulting from user space
Because we don't have a proper interface, what applications (like QEMU and
databases) end up doing is touching (i.e., reading+writing one byte to not
overwrite existing data) all individual pages.
However, that approach
1) Can result in wear on storage backing, because we end up reading/writing
each page; this is especially a problem for dax/pmem.
2) Can result in mmap_sem contention when prefaulting via multiple
threads.
3) Requires expensive signal handling, especially to catch SIGBUS in case
of hugetlbfs/shmem/file-backed memory. For example, this is
problematic in hypervisors like QEMU where SIGBUS handlers might already
be used by other subsystems concurrently to e.g, handle hardware errors.
"Simply" doing preallocation concurrently from other thread is not that
easy.
III. On MADV_WILLNEED
Extending MADV_WILLNEED is not an option because
1. It would change the semantics: "Expect access in the near future." and
"might be a good idea to read some pages" vs. "Definitely populate/
preallocate all memory and definitely fail on errors.".
2. Existing users (like virtio-balloon in QEMU when deflating the balloon)
don't want populate/prealloc semantics. They treat this rather as a hint
to give a little performance boost without too much overhead - and don't
expect that a lot of memory might get consumed or a lot of time
might be spent.
IV. MADV_POPULATE_READ and MADV_POPULATE_WRITE
Let's introduce MADV_POPULATE_READ and MADV_POPULATE_WRITE, inspired by
MAP_POPULATE, with the following semantics:
1. MADV_POPULATE_READ can be used to prefault page tables just like
manually reading each individual page. This will not break any COW
mappings. The shared zero page might get mapped and no backend storage
might get preallocated -- allocation might be deferred to
write-fault time. Especially shared file mappings require an explicit
fallocate() upfront to actually preallocate backend memory (blocks in
the file system) in case the file might have holes.
2. If MADV_POPULATE_READ succeeds, all page tables have been populated
(prefaulted) readable once.
3. MADV_POPULATE_WRITE can be used to preallocate backend memory and
prefault page tables just like manually writing (or
reading+writing) each individual page. This will break any COW
mappings -- e.g., the shared zeropage is never populated.
4. If MADV_POPULATE_WRITE succeeds, all page tables have been populated
(prefaulted) writable once.
5. MADV_POPULATE_READ and MADV_POPULATE_WRITE cannot be applied to special
mappings marked with VM_PFNMAP and VM_IO. Also, proper access
permissions (e.g., PROT_READ, PROT_WRITE) are required. If any such
mapping is encountered, madvise() fails with -EINVAL.
6. If MADV_POPULATE_READ or MADV_POPULATE_WRITE fails, some page tables
might have been populated.
7. MADV_POPULATE_READ and MADV_POPULATE_WRITE will return -EHWPOISON
when encountering a HW poisoned page in the range.
8. Similar to MAP_POPULATE, MADV_POPULATE_READ and MADV_POPULATE_WRITE
cannot protect from the OOM (Out Of Memory) handler killing the
process.
While the use case for MADV_POPULATE_WRITE is fairly obvious (i.e.,
preallocate memory and prefault page tables for VMs), one issue is that
whenever we prefault pages writable, the pages have to be marked dirty,
because the CPU could dirty them any time. while not a real problem for
hugetlbfs or dax/pmem, it can be a problem for shared file mappings: each
page will be marked dirty and has to be written back later when evicting.
MADV_POPULATE_READ allows for optimizing this scenario: Pre-read a whole
mapping from backend storage without marking it dirty, such that eviction
won't have to write it back. As discussed above, shared file mappings
might require an explciit fallocate() upfront to achieve
preallcoation+prepopulation.
Although sparse memory mappings are the primary use case, this will also
be useful for other preallocate/prefault use cases where MAP_POPULATE is
not desired or the semantics of MAP_POPULATE are not sufficient: as one
example, QEMU users can trigger preallocation/prefaulting of guest RAM
after the mapping was created -- and don't want errors to be silently
suppressed.
Looking at the history, MADV_POPULATE was already proposed in 2013 [1],
however, the main motivation back than was performance improvements --
which should also still be the case.
V. Single-threaded performance comparison
I did a short experiment, prefaulting page tables on completely *empty
mappings/files* and repeated the experiment 10 times. The results
correspond to the shortest execution time. In general, the performance
benefit for huge pages is negligible with small mappings.
V.1: Private mappings
POPULATE_READ and POPULATE_WRITE is fastest. Note that
Reading/POPULATE_READ will populate the shared zeropage where applicable
-- which result in short population times.
The fastest way to allocate backend storage (here: swap or huge pages) and
prefault page tables is POPULATE_WRITE.
V.2: Shared mappings
fallocate() is fastest, however, doesn't prefault page tables.
POPULATE_WRITE is faster than simple writes and read/writes.
POPULATE_READ is faster than simple reads.
Without a fd, the fastest way to allocate backend storage and prefault
page tables is POPULATE_WRITE. With an fd, the fastest way is usually
FALLOCATE+POPULATE_READ or FALLOCATE+POPULATE_WRITE respectively; one
exception are actual files: FALLOCATE+Read is slightly faster than
FALLOCATE+POPULATE_READ.
The fastest way to allocate backend storage prefault page tables is
FALLOCATE+POPULATE_WRITE -- except when dealing with actual files; then,
FALLOCATE+POPULATE_READ is fastest and won't directly mark all pages as
dirty.
v.3: Detailed results
==================================================
2 MiB MAP_PRIVATE:
**************************************************
Anon 4 KiB : Read : 0.119 ms
Anon 4 KiB : Write : 0.222 ms
Anon 4 KiB : Read/Write : 0.380 ms
Anon 4 KiB : POPULATE_READ : 0.060 ms
Anon 4 KiB : POPULATE_WRITE : 0.158 ms
Memfd 4 KiB : Read : 0.034 ms
Memfd 4 KiB : Write : 0.310 ms
Memfd 4 KiB : Read/Write : 0.362 ms
Memfd 4 KiB : POPULATE_READ : 0.039 ms
Memfd 4 KiB : POPULATE_WRITE : 0.229 ms
Memfd 2 MiB : Read : 0.030 ms
Memfd 2 MiB : Write : 0.030 ms
Memfd 2 MiB : Read/Write : 0.030 ms
Memfd 2 MiB : POPULATE_READ : 0.030 ms
Memfd 2 MiB : POPULATE_WRITE : 0.030 ms
tmpfs : Read : 0.033 ms
tmpfs : Write : 0.313 ms
tmpfs : Read/Write : 0.406 ms
tmpfs : POPULATE_READ : 0.039 ms
tmpfs : POPULATE_WRITE : 0.285 ms
file : Read : 0.033 ms
file : Write : 0.351 ms
file : Read/Write : 0.408 ms
file : POPULATE_READ : 0.039 ms
file : POPULATE_WRITE : 0.290 ms
hugetlbfs : Read : 0.030 ms
hugetlbfs : Write : 0.030 ms
hugetlbfs : Read/Write : 0.030 ms
hugetlbfs : POPULATE_READ : 0.030 ms
hugetlbfs : POPULATE_WRITE : 0.030 ms
**************************************************
4096 MiB MAP_PRIVATE:
**************************************************
Anon 4 KiB : Read : 237.940 ms
Anon 4 KiB : Write : 708.409 ms
Anon 4 KiB : Read/Write : 1054.041 ms
Anon 4 KiB : POPULATE_READ : 124.310 ms
Anon 4 KiB : POPULATE_WRITE : 572.582 ms
Memfd 4 KiB : Read : 136.928 ms
Memfd 4 KiB : Write : 963.898 ms
Memfd 4 KiB : Read/Write : 1106.561 ms
Memfd 4 KiB : POPULATE_READ : 78.450 ms
Memfd 4 KiB : POPULATE_WRITE : 805.881 ms
Memfd 2 MiB : Read : 357.116 ms
Memfd 2 MiB : Write : 357.210 ms
Memfd 2 MiB : Read/Write : 357.606 ms
Memfd 2 MiB : POPULATE_READ : 356.094 ms
Memfd 2 MiB : POPULATE_WRITE : 356.937 ms
tmpfs : Read : 137.536 ms
tmpfs : Write : 954.362 ms
tmpfs : Read/Write : 1105.954 ms
tmpfs : POPULATE_READ : 80.289 ms
tmpfs : POPULATE_WRITE : 822.826 ms
file : Read : 137.874 ms
file : Write : 987.025 ms
file : Read/Write : 1107.439 ms
file : POPULATE_READ : 80.413 ms
file : POPULATE_WRITE : 857.622 ms
hugetlbfs : Read : 355.607 ms
hugetlbfs : Write : 355.729 ms
hugetlbfs : Read/Write : 356.127 ms
hugetlbfs : POPULATE_READ : 354.585 ms
hugetlbfs : POPULATE_WRITE : 355.138 ms
**************************************************
2 MiB MAP_SHARED:
**************************************************
Anon 4 KiB : Read : 0.394 ms
Anon 4 KiB : Write : 0.348 ms
Anon 4 KiB : Read/Write : 0.400 ms
Anon 4 KiB : POPULATE_READ : 0.326 ms
Anon 4 KiB : POPULATE_WRITE : 0.273 ms
Anon 2 MiB : Read : 0.030 ms
Anon 2 MiB : Write : 0.030 ms
Anon 2 MiB : Read/Write : 0.030 ms
Anon 2 MiB : POPULATE_READ : 0.030 ms
Anon 2 MiB : POPULATE_WRITE : 0.030 ms
Memfd 4 KiB : Read : 0.412 ms
Memfd 4 KiB : Write : 0.372 ms
Memfd 4 KiB : Read/Write : 0.419 ms
Memfd 4 KiB : POPULATE_READ : 0.343 ms
Memfd 4 KiB : POPULATE_WRITE : 0.288 ms
Memfd 4 KiB : FALLOCATE : 0.137 ms
Memfd 4 KiB : FALLOCATE+Read : 0.446 ms
Memfd 4 KiB : FALLOCATE+Write : 0.330 ms
Memfd 4 KiB : FALLOCATE+Read/Write : 0.454 ms
Memfd 4 KiB : FALLOCATE+POPULATE_READ : 0.379 ms
Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 0.268 ms
Memfd 2 MiB : Read : 0.030 ms
Memfd 2 MiB : Write : 0.030 ms
Memfd 2 MiB : Read/Write : 0.030 ms
Memfd 2 MiB : POPULATE_READ : 0.030 ms
Memfd 2 MiB : POPULATE_WRITE : 0.030 ms
Memfd 2 MiB : FALLOCATE : 0.030 ms
Memfd 2 MiB : FALLOCATE+Read : 0.031 ms
Memfd 2 MiB : FALLOCATE+Write : 0.031 ms
Memfd 2 MiB : FALLOCATE+Read/Write : 0.031 ms
Memfd 2 MiB : FALLOCATE+POPULATE_READ : 0.030 ms
Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 0.030 ms
tmpfs : Read : 0.416 ms
tmpfs : Write : 0.369 ms
tmpfs : Read/Write : 0.425 ms
tmpfs : POPULATE_READ : 0.346 ms
tmpfs : POPULATE_WRITE : 0.295 ms
tmpfs : FALLOCATE : 0.139 ms
tmpfs : FALLOCATE+Read : 0.447 ms
tmpfs : FALLOCATE+Write : 0.333 ms
tmpfs : FALLOCATE+Read/Write : 0.454 ms
tmpfs : FALLOCATE+POPULATE_READ : 0.380 ms
tmpfs : FALLOCATE+POPULATE_WRITE : 0.272 ms
file : Read : 0.191 ms
file : Write : 0.511 ms
file : Read/Write : 0.524 ms
file : POPULATE_READ : 0.196 ms
file : POPULATE_WRITE : 0.434 ms
file : FALLOCATE : 0.004 ms
file : FALLOCATE+Read : 0.197 ms
file : FALLOCATE+Write : 0.554 ms
file : FALLOCATE+Read/Write : 0.480 ms
file : FALLOCATE+POPULATE_READ : 0.201 ms
file : FALLOCATE+POPULATE_WRITE : 0.381 ms
hugetlbfs : Read : 0.030 ms
hugetlbfs : Write : 0.030 ms
hugetlbfs : Read/Write : 0.030 ms
hugetlbfs : POPULATE_READ : 0.030 ms
hugetlbfs : POPULATE_WRITE : 0.030 ms
hugetlbfs : FALLOCATE : 0.030 ms
hugetlbfs : FALLOCATE+Read : 0.031 ms
hugetlbfs : FALLOCATE+Write : 0.031 ms
hugetlbfs : FALLOCATE+Read/Write : 0.030 ms
hugetlbfs : FALLOCATE+POPULATE_READ : 0.030 ms
hugetlbfs : FALLOCATE+POPULATE_WRITE : 0.030 ms
**************************************************
4096 MiB MAP_SHARED:
**************************************************
Anon 4 KiB : Read : 1053.090 ms
Anon 4 KiB : Write : 913.642 ms
Anon 4 KiB : Read/Write : 1060.350 ms
Anon 4 KiB : POPULATE_READ : 893.691 ms
Anon 4 KiB : POPULATE_WRITE : 782.885 ms
Anon 2 MiB : Read : 358.553 ms
Anon 2 MiB : Write : 358.419 ms
Anon 2 MiB : Read/Write : 357.992 ms
Anon 2 MiB : POPULATE_READ : 357.533 ms
Anon 2 MiB : POPULATE_WRITE : 357.808 ms
Memfd 4 KiB : Read : 1078.144 ms
Memfd 4 KiB : Write : 942.036 ms
Memfd 4 KiB : Read/Write : 1100.391 ms
Memfd 4 KiB : POPULATE_READ : 925.829 ms
Memfd 4 KiB : POPULATE_WRITE : 804.394 ms
Memfd 4 KiB : FALLOCATE : 304.632 ms
Memfd 4 KiB : FALLOCATE+Read : 1163.359 ms
Memfd 4 KiB : FALLOCATE+Write : 933.186 ms
Memfd 4 KiB : FALLOCATE+Read/Write : 1187.304 ms
Memfd 4 KiB : FALLOCATE+POPULATE_READ : 1013.660 ms
Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 794.560 ms
Memfd 2 MiB : Read : 358.131 ms
Memfd 2 MiB : Write : 358.099 ms
Memfd 2 MiB : Read/Write : 358.250 ms
Memfd 2 MiB : POPULATE_READ : 357.563 ms
Memfd 2 MiB : POPULATE_WRITE : 357.334 ms
Memfd 2 MiB : FALLOCATE : 356.735 ms
Memfd 2 MiB : FALLOCATE+Read : 358.152 ms
Memfd 2 MiB : FALLOCATE+Write : 358.331 ms
Memfd 2 MiB : FALLOCATE+Read/Write : 358.018 ms
Memfd 2 MiB : FALLOCATE+POPULATE_READ : 357.286 ms
Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 357.523 ms
tmpfs : Read : 1087.265 ms
tmpfs : Write : 950.840 ms
tmpfs : Read/Write : 1107.567 ms
tmpfs : POPULATE_READ : 922.605 ms
tmpfs : POPULATE_WRITE : 810.094 ms
tmpfs : FALLOCATE : 306.320 ms
tmpfs : FALLOCATE+Read : 1169.796 ms
tmpfs : FALLOCATE+Write : 933.730 ms
tmpfs : FALLOCATE+Read/Write : 1191.610 ms
tmpfs : FALLOCATE+POPULATE_READ : 1020.474 ms
tmpfs : FALLOCATE+POPULATE_WRITE : 798.945 ms
file : Read : 654.101 ms
file : Write : 1259.142 ms
file : Read/Write : 1289.509 ms
file : POPULATE_READ : 661.642 ms
file : POPULATE_WRITE : 1106.816 ms
file : FALLOCATE : 1.864 ms
file : FALLOCATE+Read : 656.328 ms
file : FALLOCATE+Write : 1153.300 ms
file : FALLOCATE+Read/Write : 1180.613 ms
file : FALLOCATE+POPULATE_READ : 668.347 ms
file : FALLOCATE+POPULATE_WRITE : 996.143 ms
hugetlbfs : Read : 357.245 ms
hugetlbfs : Write : 357.413 ms
hugetlbfs : Read/Write : 357.120 ms
hugetlbfs : POPULATE_READ : 356.321 ms
hugetlbfs : POPULATE_WRITE : 356.693 ms
hugetlbfs : FALLOCATE : 355.927 ms
hugetlbfs : FALLOCATE+Read : 357.074 ms
hugetlbfs : FALLOCATE+Write : 357.120 ms
hugetlbfs : FALLOCATE+Read/Write : 356.983 ms
hugetlbfs : FALLOCATE+POPULATE_READ : 356.413 ms
hugetlbfs : FALLOCATE+POPULATE_WRITE : 356.266 ms
**************************************************
[1] https://lkml.org/lkml/2013/6/27/698
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20210419135443.12822-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MPOL_LOCAL policy has been setup as a real policy, but it is still handled
like a faked POL_PREFERRED policy with one internal MPOL_F_LOCAL flag bit
set, and there are many places having to judge the real 'prefer' or the
'local' policy, which are quite confusing.
In current code, there are 4 cases that MPOL_LOCAL are used:
1. user specifies 'local' policy
2. user specifies 'prefer' policy, but with empty nodemask
3. system 'default' policy is used
4. 'prefer' policy + valid 'preferred' node with MPOL_F_STATIC_NODES
flag set, and when it is 'rebind' to a nodemask which doesn't contains
the 'preferred' node, it will perform as 'local' policy
So make 'local' a real policy instead of a fake 'prefer' one, and kill
MPOL_F_LOCAL bit, which can greatly reduce the confusion for code reading.
For case 4, the logic of mpol_rebind_preferred() is confusing, as Michal
Hocko pointed out:
: I do believe that rebinding preferred policy is just bogus and it should
: be dropped altogether on the ground that a preference is a mere hint from
: userspace where to start the allocation. Unless I am missing something
: cpusets will be always authoritative for the final placement. The
: preferred node just acts as a starting point and it should be really
: preserved when cpusets changes. Otherwise we have a very subtle behavior
: corner cases.
So dump all the tricky transformation between 'prefer' and 'local', and
just record the new nodemask of rebinding.
[feng.tang@intel.com: fix a problem in mpol_set_nodemask(), per Michal Hocko]
Link: https://lkml.kernel.org/r/1622560492-1294-3-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: refine code and comments of mpol_set_nodemask(), per Michal]
Link: https://lkml.kernel.org/r/20210603081807.GE56979@shbuild999.sh.intel.com
Link: https://lkml.kernel.org/r/1622469956-82897-3-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the feature is fully implemented (the faulting path hooks exist
so userspace is notified, and the ioctl to resolve such faults is
available), advertise this as a supported feature.
Link: https://lkml.kernel.org/r/20210503180737.2487560-6-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmDbjZ4UHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMMMRAAgwwYgJ8pqac21co0rLCEMLdnSKvu
ueaqCa0F/c+UJ9VmHZ0eDr4FHFgCxKamUP1+/Zn4U53tc483mX/Kz6blGd91hz1K
YnYJGK/tlOmhOJtaZOsp0saRrYn/62kO5tyzp+mhNKje5ON4ICA5jR3Wz+B+RDSM
GXH8EDuxKVkAuqpTZHm79a8LL2G9uDre2uWWHehDxLNAOuLxK/3DnObHRdEi4ZcV
9MSFljLnSocFdLOPRL2R05LQ2ce18NHkTW+FMzPbTezLP4lm62lEsAYOQ1vvUm0A
MoncR4bFGMPYbM5WQmwiDDBBVoo6+HB5Q0AK6fbZwaIJYNFCCc0ytKKyfSyyIaRK
8qSaGeXpUU4nHeygeHvhz7uOVFJfG+WXWRM2WIOwUWU0KKbvCSJ3UDM3cuJHIQol
jv2yuYIZQcz/tXTsOn59ivjsxXclsb3d1Z6FmligaoAoASCerCgeGkhDC4CwHYg5
qZHxE/rtiZxzgZ15cghxITOcGzOVEeYqbo9FzD5aXh66MGzOkrtYwJ+CCVTSx27O
uco6PKelVI2EJ9v4KeQtIMOFDU/ZyJrde/q2otfqQoSaR12Jarpi0qL/5ossuR2B
bEqNN6sX22++QfvLZOAJ8EmYjzkmDfs4q4LYQxMpQfw27OTcK17rXcnI//mmRbUr
SrCuVW3mF8FzxJc=
=1bAZ
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Another merge window, another small audit pull request.
Four patches in total: one is cosmetic, one removes an unnecessary
initialization, one renames some enum values to prevent name
collisions, and one converts list_del()/list_add() to list_move().
None of these are earth shattering and all pass the audit-testsuite
tests while merging cleanly on top of your tree from earlier today"
* tag 'audit-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove unnecessary 'ret' initialization
audit: remove trailing spaces and tabs
audit: Use list_move instead of list_del/list_add
audit: Rename enum audit_state constants to avoid AUDIT_DISABLED redefinition
audit: add blank line after variable declarations
Problem:
On reconfigure of device, there is no way to defend if the backend
storage is matching with the initial backend storage.
Say, if an initial connect request for backend "pool1/image1" got
mapped to /dev/nbd0 and the userspace process is terminated. A next
reconfigure request within NBD_ATTR_DEAD_CONN_TIMEOUT is allowed to
use /dev/nbd0 for a different backend "pool1/image2"
For example, an operation like below could be dangerous:
$ sudo rbd-nbd map --try-netlink rbd-pool/ext4-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="bfc444b4-64b1-418f-8b36-6e0d170cfc04" TYPE="ext4"
$ sudo pkill -9 rbd-nbd
$ sudo rbd-nbd attach --try-netlink --device /dev/nbd0 rbd-pool/xfs-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="d29bf343-6570-4069-a9ea-2fa156ced908" TYPE="xfs"
Solution:
Provide a way for userspace processes to keep some metadata to identify
between the device and the backend, so that when a reconfigure request is
made, we can compare and avoid such dangerous operations.
With this solution, as part of the initial connect request, backend
path can be stored in the sysfs per device config, so that on a reconfigure
request it's easy to check if the backend path matches with the initial
connect backend path.
Please note, ioctl interface to nbd will not have these changes, as there
won't be any reconfigure.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210429102828.31248-1-prasanna.kalever@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Highlights:
- New think-lmi driver adding support for changing BIOS settings from
within Linux using the standard firmware-attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function
Note this also contains merges of the following immutable branches/tags
shared with other subsystems:
- platform-drivers-x86-goodix-v5.14-1
- intel-gpio-v5.14-1
- linux-pm/acpi-scan
- devm-helpers-v5.14-1
The following is an automated git shortlog grouped by driver:
ACPI:
- scan: initialize local variable to avoid garbage being returned
- scan: Add function to fetch dependent of ACPI device
- scan: Extend acpi_walk_dep_device_list()
- scan: Rearrange dep_unmet initialization
Add intel_skl_int3472 driver:
- Add intel_skl_int3472 driver
ISST:
- Use numa node id for cpu pci dev mapping
- Optimize CPU to PCI device mapping
Input:
- goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c
MAINTAINERS:
- Update IRC link for Surface System Aggregator subsystem
- Update info for telemetry
Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans
Merge tag 'devm-helpers-v5.14-1' into review-hans:
- Merge tag 'devm-helpers-v5.14-1' into review-hans
Merge tag 'intel-gpio-v5.14-1' into review-hans:
- Merge tag 'intel-gpio-v5.14-1' into review-hans
Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans:
- Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans
Remove "default n" entries:
- Remove "default n" entries
Rename hp-wireless to wireless-hotkey:
- Rename hp-wireless to wireless-hotkey
asus-nb-wmi:
- Revert "add support for ASUS ROG Zephyrus G14 and G15"
- Revert "Drop duplicate DMI quirk structures"
dcdbas:
- drop unneeded assignment in host_control_smi()
dell-privacy:
- Add support for Dell hardware privacy
dell-wmi:
- Rename dell-wmi.c to dell-wmi-base.c
dell-wmi-sysman:
- Change user experience when Admin/System Password is modified
- fw_attr_inuse can be static
- Use firmware_attributes_class helper
- Make populate_foo_data functions more robust
dell-wmi-sysman/think-lmi:
- Make fw_attr_class global static
devm-helpers:
- Add resource managed version of work init
docs:
- driver-api: Update Surface Aggregator user-space interface documentation
extcon:
- extcon-max8997: Simplify driver using devm
- extcon-max8997: Fix IRQ freeing at error path
- extcon-max77693.c: Fix potential work-queue cancellation race
- extcon-max14577: Fix potential work-queue cancellation race
firmware_attributes_class:
- Create helper file for handling firmware-attributes class registration events
gpio:
- wcove: Split error handling for CTRL and IRQ registers
- wcove: Unify style of to_reg() with to_ireg()
- wcove: Use IRQ hardware number getter instead of direct access
- crystalcove: remove platform_set_drvdata() + cleanup probe
gpiolib:
- acpi: Add acpi_gpio_get_io_resource()
- acpi: Introduce acpi_get_and_request_gpiod() helper
hdaps:
- Constify static attribute_group struct
ideapad-laptop:
- Ignore VPC event bit 10
intel_cht_int33fe:
- Move to its own subfolder
- Correct "displayport" fwnode reference
intel_ips:
- fix set but unused warning in read_mgtv
intel_pmt_crashlog:
- Constify static attribute_group struct
intel_skl_int3472:
- Uninitialized variable in skl_int3472_handle_gpio_resources()
- Move to intel/ subfolder
- Provide skl_int3472_unregister_clock()
- Provide skl_int3472_unregister_regulator()
- Use ACPI GPIO resource directly
- Fix dependencies (drop CLKDEV_LOOKUP)
- Free ACPI device resources after use
mfd:
- tps68470: Remove tps68470 MFD driver
platform/mellanox:
- mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag"
platform/surface:
- aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_packet_layer.c
- aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_request_layer.c
- aggregator: Drop unnecessary variable initialization
- aggregator: Do not return uninitialized value
- aggregator_cdev: Add lockdep support
- aggregator_cdev: Allow enabling of events from user-space
- aggregator_cdev: Add support for forwarding events to user-space
- aggregator: Update copyright
- aggregator: Allow enabling of events without notifiers
- aggregator: Allow registering notifiers without enabling events
- dtx: Add missing mutex_destroy() call in failure path
- aggregator: Fix event disable function
- aggregator_registry: Consolidate node groups for 5th- and 6th-gen devices
- aggregator_registry: Add support for 13" Intel Surface Laptop 4
- aggregator_registry: Update comments for 15" AMD Surface Laptop 4
samsung-laptop:
- set debugfs blobs to read only
- use octal numbers for rwx file permissions
tc1100-wmi:
- Constify static attribute_group struct
think-lmi:
- Move kfree(setting->possible_values) to tlmi_attr_setting_release()
- Split current_value to reflect only the value
- Fix issues with duplicate attributes
- Return EINVAL when kbdlang gets set to a 0 length string
- Add missing MODULE_DEVICE_TABLE
- Avoid potential read before start of the buffer
- Fix check for admin password being set
- Add WMI interface support on Lenovo platforms
thinkpad-lmi:
- Remove unused display_name member from struct tlmi_pwd_setting
thinkpad_acpi:
- Add X1 Carbon Gen 9 second fan support
- Fix inconsistent indenting
tools/power/x86/intel-speed-select:
- v1.10 release
- Fix uncore memory frequency display
toshiba_acpi:
- Fix missing error code in toshiba_acpi_setup_keyboard()
toshiba_haps:
- Fix missing newline in pr_debug call in toshiba_haps_notify
touchscreen_dmi:
- Fix Chuwi Hi10 Pro comment
- Add info for the Goodix GT912 panel of TM800A550L tablets
- Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets
x86/platform/uv:
- Constify static attribute_group struct
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmDbELwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yp2wgAj1mTOJi/4Rx1g8wXLpP/hflEkFMU
yyMeKe3LOEzuo/LZUfW4tqWiXa4aTgN6rUOF8KUumsIor/72hKcczuPVY+qCqF7V
qYZ0vMG93DfAyVPQvBrNjHMXiVevD/gMFRqJEOOgXt96B6Zea4vh1pBvLACAHFZ0
bjkZDX3cO89TSfUF7uhiU9UkMvMMAVs34Knc1Pe4QnZ16e2kPGcKip3qb73yT+xC
8NVRgE6fdSIJfDAVzqpdh91rfDdzHDJ6vT10uijOTkriJciN07UKtYuK5StCpAo5
sXIQllHySHRHj5N0IWZ04w6RMQ+l/9CaHDttkYWW3fV1EU9SVzvp/+d6zA==
=tAuE
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New think-lmi driver adding support for changing Lenovo Thinkpad
BIOS settings from within Linux using the standard firmware-
attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function"
* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
platform/x86: think-lmi: Split current_value to reflect only the value
platform/x86: think-lmi: Fix issues with duplicate attributes
platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
platform/x86: intel_cht_int33fe: Move to its own subfolder
platform/x86: intel_skl_int3472: Move to intel/ subfolder
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
platform/x86: intel_skl_int3472: Free ACPI device resources after use
platform/x86: Remove "default n" entries
platform/x86: ISST: Use numa node id for cpu pci dev mapping
platform/x86: ISST: Optimize CPU to PCI device mapping
tools/power/x86/intel-speed-select: v1.10 release
tools/power/x86/intel-speed-select: Fix uncore memory frequency display
extcon: extcon-max8997: Simplify driver using devm
extcon: extcon-max8997: Fix IRQ freeing at error path
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYNnKNAAKCRCRxhvAZXjc
ok/HAQDz3FK3/yeqxH6OLyCedUcD+YBFPPzrfqX+3y6q3z5tGgD9GAGxFXWcMFA2
/cbfmizwh1eJ3WMnbHUp7x6ogpQhWwQ=
=PpNs
-----END PGP SIGNATURE-----
Merge tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr updates from Christian Brauner:
"A few releases ago the old mount API gained support for a mount
options which prevents following symlinks on a given mount. This adds
support for it in the new mount api through the MOUNT_ATTR_NOSYMFOLLOW
flag via mount_setattr() and fsmount(). With mount_setattr() that flag
can even be applied recursively.
There's an additional ack from Ross Zwisler who originally authored
the nosymfollow patch. As I've already had the patches in my for-next
I didn't add his ack explicitly"
* tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: test MOUNT_ATTR_NOSYMFOLLOW with mount_setattr()
mount: Support "nosymfollow" in new mount api
-----BEGIN PGP SIGNATURE-----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=htVu
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"A normal mix of improvements, core changes and features that user have
been missing or complaining about.
User visible changes:
- new sysfs exports:
- add sysfs knob to limit scrub IO bandwidth per device
- device stats are also available in
/sys/fs/btrfs/FSID/devinfo/DEVID/error_stats
- support cancellable resize and device delete ioctls
- change how the empty value is interpreted when setting a property,
so far we have only 'btrfs.compression' and we need to distinguish
a reset to defaults and setting "do not compress", in general the
empty value will always mean 'reset to defaults' for any other
property, for compression it's either 'no' or 'none' to forbid
compression
Performance improvements:
- no need for full sync when truncation does not touch extents,
reported run time change is -12%
- avoid unnecessary logging of xattrs during fast fsyncs (+17%
throughput, -17% runtime on xattr stress workload)
Core:
- preemptive flushing improvements and fixes
- adjust clamping logic on multi-threaded workloads to avoid
flushing too soon
- take into account global block reserve, may help on almost full
filesystems
- continue flushing when there are enough pending delalloc and
ordered bytes
- simplify logic around conditional transaction commit, a workaround
used in the past for throttling that's been superseded by ticket
reservations that manage the throttling in a better way
- subpage blocksize preparation:
- submit read time repair only for each corrupted sector
- scrub repair now works with sectors and not pages
- free space cache (v1) works with sectors and not pages
- more fine grained bio tracking for extents
- subpage support in page callbacks, extent callbacks, end io
callbacks
- simplify transaction abort logic and always abort and don't check
various potentially unreliable stats tracked by the transaction
- exclusive operations can do more checks when started and allow eg.
cancellation of the same running operation
- ensure relocation never runs while we have send operations running,
e.g. when zoned background auto reclaim starts
Fixes:
- zoned: more sanity checks of write pointer
- improve error handling in delayed inodes
- send:
- fix invalid path for unlink operations after parent
orphanization
- fix crash when memory allocations trigger reclaim
- skip compression of we have only one page (can't make things
better)
- empty value of a property newly means reset to default
Other:
- lots of cleanups, comment updates, yearly typo fixing
- disable build on platforms having page size 256K"
* tag 'for-5.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (101 commits)
btrfs: remove unused btrfs_fs_info::total_pinned
btrfs: rip out btrfs_space_info::total_bytes_pinned
btrfs: rip the first_ticket_bytes logic from fail_all_tickets
btrfs: remove FLUSH_DELAYED_REFS from data ENOSPC flushing
btrfs: rip out may_commit_transaction
btrfs: send: fix crash when memory allocations trigger reclaim
btrfs: ensure relocation never runs while we have send operations running
btrfs: shorten integrity checker extent data mount option
btrfs: switch mount option bits to enums and use wider type
btrfs: props: change how empty value is interpreted
btrfs: compression: don't try to compress if we don't have enough pages
btrfs: fix unbalanced unlock in qgroup_account_snapshot()
btrfs: sysfs: export dev stats in devinfo directory
btrfs: fix typos in comments
btrfs: remove a stale comment for btrfs_decompress_bio()
btrfs: send: use list_move_tail instead of list_del/list_add_tail
btrfs: disable build on platforms having page size 256K
btrfs: send: fix invalid path for unlink operations after parent orphanization
btrfs: inline wait_current_trans_commit_start in its caller
btrfs: sink wait_for_unblock parameter to async commit
...
-----BEGIN PGP SIGNATURE-----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=VQX8
-----END PGP SIGNATURE-----
Merge tag 'media/v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- V4L2 core control API was split into separate files
- New RC maps: tango and tc-90405
- Hantro driver got support for G2/HEVC decoder
- av7710 is moving to staging, together with some legacy APIs
- several cleanups related to compat_ioctl32 code
- Move the MPEG-2 stateless control type out of staging
- Address several issues with RPM get logic on media drivers
- Lots of cleanups, bug fixes and improvements.
* tag 'media/v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: s5p-mfc: Fix display delay control creation
media: mtk-vpu: on suspend, read/write regs only if vpu is running
media: video-mux: Skip dangling endpoints
media: Fix Media Controller API config checks
media: i2c: rdacm20: Re-work ov10635 reset
media: i2c: rdacm20: Check return values
media: i2c: rdacm20: Report camera module name
media: i2c: rdacm20: Enable noise immunity
media: i2c: rdacm20: Embed 'serializer' field
media: i2c: rdacm21: Power up OV10640 before OV490
media: i2c: rdacm21: Fix OV10640 powerup
media: i2c: rdacm21: Add delay after OV490 reset
media: i2c: max9271: Introduce wake_up() function
media: i2c: max9271: Check max9271_write() return
media: i2c: max9286: Rework comments in .bound()
media: i2c: max9286: Define high channel amplitude
media: i2c: max9286: Cache channel amplitude
media: i2c: max9286: Rename reverse_channel_mv
media: i2c: max9286: Adjust parameters indent
media: hantro: add support for Rockchip RK3036
...
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of live migration
- Support for initializing the PDPTRs without loading them from memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this has
been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on
AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDV9UYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOIRgf/XX8fKLh24RnTOs2ldIu2AfRGVrT4
QMrr8MxhmtukBAszk2xKvBt8/6gkUjdaIC3xqEnVjxaDaUvZaEtP7CQlF5JV45rn
iv1zyxUKucXrnIOr+gCioIT7qBlh207zV35ArKioP9Y83cWx9uAs22pfr6g+7RxO
h8bJZlJbSG6IGr3voANCIb9UyjU1V/l8iEHqRwhmr/A5rARPfD7g8lfMEQeGkzX6
+/UydX2fumB3tl8e2iMQj6vLVdSOsCkehvpHK+Z33EpkKhan7GwZ2sZ05WmXV/nY
QLAYfD10KegoNWl5Ay4GTp4hEAIYVrRJCLC+wnLdc0U8udbfCuTC31LK4w==
=NcRh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This covers all architectures (except MIPS) so I don't expect any
other feature pull requests this merge window.
ARM:
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration and
apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical
address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of
live migration
- Support for initializing the PDPTRs without loading them from
memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this
has been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM
registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap
on AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits)
KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled
kvm: x86: disable the narrow guest module parameter on unload
selftests: kvm: Allows userspace to handle emulation errors.
kvm: x86: Allow userspace to handle emulation errors
KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on
KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT
KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic
KVM: x86: Enhance comments for MMU roles and nested transition trickiness
KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE
KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU
KVM: x86/mmu: Use MMU's role to determine PTTYPE
KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers
KVM: x86/mmu: Add a helper to calculate root from role_regs
KVM: x86/mmu: Add helper to update paging metadata
KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0
KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls
KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper
KVM: x86/mmu: Get nested MMU's root level from the MMU's role
...
* aggregation handling improvements for some drivers
* hidden AP discovery on 6 GHz and other HE 6 GHz
improvements
* minstrel improvements for no-ack frames
* deferred rate control for TXQs to improve reaction
times
* virtual time-based airtime scheduler
* along with various little cleanups/fixups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmDWUHgACgkQB8qZga/f
l8RxXA/+KjkrFUGDHlMTIzS/i03EcB+idLYy+XBWYuO3PN4p/uCCXLzdGfiRKTxp
iCAjYp0ZP01FlN4sOIN+qqrUMoN0e8xqBEY1DFbJELBB1knV4VR0FeBPPcBMUEgE
xAjdZnIsfKO1yU2mrdQVDnkvXr4jHDALePvGwCQe+4KUbwCmVjo6nb534v17Ie3C
MDNnGq395fCvo9NW+Yvzw6s9ZLdhr28bGhSBgBrqmPBx/9vm3b7BA8qO+X6BzAny
87S2x+z40wabBujCGMvw9J5H6OJ0ZLfbT0TumNznqQbCbmwRdSUC+W/cjgRq/aQn
CA3E9T7tofIr1mk9EgcjE8ax91TB/TTX5Nh9Huki25B7rNRBM57VnuEuzmXP5qBS
xgsr60agQHp2ZAGRPBC9msPcPCbvRfdl9ckTAF8/4vI7uEXSyYViX92M0F1FEy60
Mw13B8WeRA4bH22xHpqdXsyl0x2OQHXHlLHfpzmhcUy0i2cQOQMsWbl3g6CJMTq+
/InNSaG+cqrCVse734KJLumRhOq4+MkedYJlqL7uHZJrXlLgQ9Z8ewANjJ/BjTsQ
d8I16XkKPyv8UiJEwHZ6NaHvU48LR8T/r4ym9c/rz0DTWHZyp87QMYa55iwuk4Zo
cW7G3f/N7dMk9fGRxgfIrnNwNUCMsGcBSJeJyr5qT7u8+RW0bRo=
=nFvj
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-06-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes berg says:
====================
Lots of changes:
* aggregation handling improvements for some drivers
* hidden AP discovery on 6 GHz and other HE 6 GHz
improvements
* minstrel improvements for no-ack frames
* deferred rate control for TXQs to improve reaction
times
* virtual time-based airtime scheduler
* along with various little cleanups/fixups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow
the flexible utilization of SMT siblings, without exposing
untrusted domains to information leaks & side channels, plus
to ensure more deterministic computing performance on SMT
systems used by heterogenous workloads.
There's new prctls to set core scheduling groups, which
allows more flexible management of workloads that can share
siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve
'memcache'-like workloads.
- "Age" (decay) average idle time, to better track & improve workloads
such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked
via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable
it at runtime if tooling needs it. Use static keys and
other optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3VDr
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
- Core locking & atomics:
- Convert all architectures to ARCH_ATOMIC: move every
architecture to ARCH_ATOMIC, then get rid of ARCH_ATOMIC
and all the transitory facilities and #ifdefs.
Much reduction in complexity from that series:
63 files changed, 756 insertions(+), 4094 deletions(-)
- Self-test enhancements
- Futexes:
- Add the new FUTEX_LOCK_PI2 ABI, which is a variant that
doesn't set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).
[ The temptation to repurpose FUTEX_LOCK_PI's implicit
setting of FLAGS_CLOCKRT & invert the flag's meaning
to avoid having to introduce a new variant was
resisted successfully. ]
- Enhance futex self-tests
- Lockdep:
- Fix dependency path printouts
- Optimize trace saving
- Broaden & fix wait-context checks
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tH//
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Core locking & atomics:
- Convert all architectures to ARCH_ATOMIC: move every architecture
to ARCH_ATOMIC, then get rid of ARCH_ATOMIC and all the
transitory facilities and #ifdefs.
Much reduction in complexity from that series:
63 files changed, 756 insertions(+), 4094 deletions(-)
- Self-test enhancements
- Futexes:
- Add the new FUTEX_LOCK_PI2 ABI, which is a variant that doesn't
set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).
[ The temptation to repurpose FUTEX_LOCK_PI's implicit setting of
FLAGS_CLOCKRT & invert the flag's meaning to avoid having to
introduce a new variant was resisted successfully. ]
- Enhance futex self-tests
- Lockdep:
- Fix dependency path printouts
- Optimize trace saving
- Broaden & fix wait-context checks
- Misc cleanups and fixes.
* tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
locking/lockdep: Correct the description error for check_redundant()
futex: Provide FUTEX_LOCK_PI2 to support clock selection
futex: Prepare futex_lock_pi() for runtime clock selection
lockdep/selftest: Remove wait-type RCU_CALLBACK tests
lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
lockdep: Fix wait-type for empty stack
locking/selftests: Add a selftest for check_irq_usage()
lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
locking/lockdep: Remove the unnecessary trace saving
locking/lockdep: Fix the dep path printing for backwards BFS
selftests: futex: Add futex compare requeue test
selftests: futex: Add futex wait test
seqlock: Remove trailing semicolon in macros
locking/lockdep: Reduce LOCKDEP dependency list
locking/lockdep,doc: Improve readability of the block matrix
locking/atomics: atomic-instrumented: simplify ifdeffery
locking/atomic: delete !ARCH_ATOMIC remnants
locking/atomic: xtensa: move to ARCH_ATOMIC
locking/atomic: sparc: move to ARCH_ATOMIC
locking/atomic: sh: move to ARCH_ATOMIC
...
This ioctl request reads from uffdio_continue structure written by
userspace which justifies _IOC_WRITE flag. It also writes back to that
structure which justifies _IOC_READ flag.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.
Fixes: f619147104 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
-----BEGIN PGP SIGNATURE-----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=fWBV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v5.14.
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
Add a fallback mechanism to the in-kernel instruction emulator that
allows userspace the opportunity to process an instruction the emulator
was unable to. When the in-kernel instruction emulator fails to process
an instruction it will either inject a #UD into the guest or exit to
userspace with exit reason KVM_INTERNAL_ERROR. This is because it does
not know how to proceed in an appropriate manner. This feature lets
userspace get involved to see if it can figure out a better path
forward.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210510144834.658457-2-aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.
Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.
Thus, this is following up on Eric's commit 3d368ab87c ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE. This is also in line in how we retrieve socket cookie
via SO_COOKIE.
[1] https://kind.sigs.k8s.io/
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit defines the API for userspace and prepare the common
functionalities to support per VM/VCPU binary stats data readings.
The KVM stats now is only accessible by debugfs, which has some
shortcomings this change series are supposed to fix:
1. The current debugfs stats solution in KVM could be disabled
when kernel Lockdown mode is enabled, which is a potential
rick for production.
2. The current debugfs stats solution in KVM is organized as "one
stats per file", it is good for debugging, but not efficient
for production.
3. The stats read/clear in current debugfs solution in KVM are
protected by the global kvm_lock.
Besides that, there are some other benefits with this change:
1. All KVM VM/VCPU stats can be read out in a bulk by one copy
to userspace.
2. A schema is used to describe KVM statistics. From userspace's
perspective, the KVM statistics are self-describing.
3. With the fd-based solution, a separate telemetry would be able
to read KVM stats in a less privileged environment.
4. After the initial setup by reading in stats descriptors, a
telemetry only needs to read the stats data itself, no more
parsing or setup is needed.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com> #arm64
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-3-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A final batch of fixes for v5.13, this is larger than I'd like due to
the fixes for a series of suspend issues that Intel turned up in their
testing this week.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDTZ30ACgkQJNaLcl1U
h9C5dQf6AjDh6y0SfB264cv2kSCLtYsOstSeamrEv3HBjqGiWEDgzfdB5Z+5d+EJ
ScWsfsZ8eMr7WcMZJ+wEGNKxcZO2uHEaC29dpNrDeE4Ffr9hsSucPhJ8Fm+K0qDH
VqX4kDPFY+OiuOf5RipDyAgoHo4zhIeaE9Rgxd4lbNH/xpWtgalN22iyYLpiYZLP
YJk+/8L37ZcKYX3uCImMEe4yseH3AFzGz7yi/tyyWCUP7GEwtWgzv2vadxewjY5E
h12ToqsTMQIrix0ZfMbYW9KJ7ANn6PFBz10vH8XuGbUlBW33pVzqP+Wr9adXGG4N
XLs6wRpbDbdJc3aDpDjA1nRlBl5XEg==
=h2+R
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Fixes for v5.13
A final batch of fixes for v5.13, this is larger than I'd like due to
the fixes for a series of suspend issues that Intel turned up in their
testing this week.
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
This commit adds two stats for the socket migration feature to evaluate the
effectiveness: LINUX_MIB_TCPMIGRATEREQ(SUCCESS|FAILURE).
If the migration fails because of the own_req race in receiving ACK and
sending SYN+ACK paths, we do not increment the failure stat. Then another
CPU is responsible for the req.
Link: https://lore.kernel.org/bpf/CAK6E8=cgFKuGecTzSCSQ8z3YJ_163C0uwO9yRvfDSE7vOe9mJA@mail.gmail.com/
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Skip non-SCTP packets in the new SCTP chunk support for nft_exthdr,
from Phil Sutter.
2) Simplify TCP option sanity check for TCP packets, also from Phil.
3) Add a new expression to store when the rule has been used last time.
4) Pass the hook state object to log function, from Florian Westphal.
5) Document the new sysctl knobs to tune the flowtable timeouts,
from Oz Shlomo.
6) Fix snprintf error check in the new nfnetlink_hook infrastructure,
from Dan Carpenter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pick up dependent changes which either went mainline (x86/urgent is
based on -rc7 and that contains them) as urgent fixes and the current
x86/urgent branch which contains two more urgent fixes, so that the
bigger FPU rework can base off ontop.
Signed-off-by: Borislav Petkov <bp@suse.de>
There shouldn't be any reason to ever use uncached over writecombine,
so just use writecombine for MSM_BO_UNCACHED.
Note: userspace never used MSM_BO_UNCACHED anyway
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a new cache mode for creating coherent host-cached BOs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Link: https://lore.kernel.org/r/20210423190833.25319-5-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
There may be cases where vendor-specific elements need to be
used over the air. Rather than have driver or firmware add
them and possibly cause problems that way, add them to the
iftype-data band capabilities. This way we can advertise to
userspace first, and use them in mac80211 next.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.e8c4f0347276.Iee5964682b3e9ec51fc1cd57a7c62383eaf6ddd7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Backmerge tag 'v5.13-rc7' into drm-next
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.
With this socket option, users can change probe_interval for
a transport, asoc or sock after it's created.
Note that if the change is for an asoc, also apply the change
to each transport in this asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aharon Landau says:
====================
In case device supports only real-time timestamp, the kernel will fail to
create QP despite rdma-core requested such timestamp type.
It is because device returns free-running timestamp, and the conversion
from free-running to real-time is performed in the user space.
This series fixes it, by returning real-time timestamp.
====================
* mlx5_realtime_ts:
RDMA/mlx5: Support real-time timestamp directly from the device
RDMA/mlx5: Refactor get_ts_format functions to simplify code
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc7' into rdma.git for-next
Linux 5.13-rc7
Needed for dependencies in following patches. Merge conflict in rxe_cmop.c
resolved by compining both patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
'ETHTOOL_A_MODULE_EEPROM_DATA' is a binary attribute, not a nested one.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if the user asks for a real-time timestamp, the device will
return a free-running one, and the timestamp will be translated to
real-time in the user-space.
When the device supports only real-time timestamp and not free-running,
the creation of the QP will fail even though the user needs supported the
real-time one. To prevent this, we will return the real-time timestamp
directly from the device.
Link: https://lore.kernel.org/r/c6cfc8e6f038575c5c2de6505830f7e74e4de80d.1623829775.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.
Without a flexible array, this looks like an attempt to perform a memcpy()
read beyond the end of the packet->mad.data array:
drivers/infiniband/core/user_mad.c:
memcpy(packet->msg->mad, packet->mad.data, IB_MGMT_MAD_HDR);
Switch from [0] to [] to use the appropriately handled type for trailing
bytes.
Link: https://lore.kernel.org/r/20210616202615.1247242-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The FUTEX_LOCK_PI futex operand uses a CLOCK_REALTIME based absolute
timeout since it was implemented, but it does not require that the
FUTEX_CLOCK_REALTIME flag is set, because that was introduced later.
In theory as none of the user space implementations can set the
FUTEX_CLOCK_REALTIME flag on this operand, it would be possible to
creatively abuse it and make the meaning invers, i.e. select CLOCK_REALTIME
when not set and CLOCK_MONOTONIC when set. But that's a nasty hackery.
Another option would be to have a new FUTEX_CLOCK_MONOTONIC flag only for
FUTEX_LOCK_PI, but that's also awkward because it does not allow libraries
to handle the timeout clock selection consistently.
So provide a new FUTEX_LOCK_PI2 operand which implements the timeout
semantics which the other operands use and leave FUTEX_LOCK_PI alone.
Reported-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210422194705.440773992@linutronix.de
Now that we have H_RPT_INVALIDATE fully implemented, enable
support for the same via KVM_CAP_PPC_RPT_INVALIDATE KVM capability
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-6-bharata@linux.ibm.com
The VMM may not wish to have it's own mapping of guest memory mapped
with PROT_MTE because this causes problems if the VMM has tag checking
enabled (the guest controls the tags in physical RAM and it's unlikely
the tags are correct for the VMM).
Instead add a new ioctl which allows the VMM to easily read/write the
tags from guest memory, allowing the VMM's mapping to be non-PROT_MTE
while the VMM can still read/write the tags for the purpose of
migration.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-6-steven.price@arm.com
Add a new VM feature 'KVM_ARM_CAP_MTE' which enables memory tagging
for a VM. This will expose the feature to the guest and automatically
tag memory pages touched by the VM as PG_mte_tagged (and clear the tag
storage) to ensure that the guest cannot see stale tags, and so that
the tags are correctly saved/restored across swap.
Actually exposing the new capability to user space happens in a later
patch.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
[maz: move VM_SHARED sampling into the critical section]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-3-steven.price@arm.com
Even if POSIX doesn't mandate it, linux users legitimately expect sync() to
flush all data and metadata to physical storage when it is located on the
same system. This isn't happening with virtiofs though: sync() inside the
guest returns right away even though data still needs to be flushed from
the host page cache.
This is easily demonstrated by doing the following in the guest:
$ dd if=/dev/zero of=/mnt/foo bs=1M count=5K ; strace -T -e sync sync
5120+0 records in
5120+0 records out
5368709120 bytes (5.4 GB, 5.0 GiB) copied, 5.22224 s, 1.0 GB/s
sync() = 0 <0.024068>
and start the following in the host when the 'dd' command completes
in the guest:
$ strace -T -e fsync /usr/bin/sync virtiofs/foo
fsync(3) = 0 <10.371640>
There are no good reasons not to honor the expected behavior of sync()
actually: it gives an unrealistic impression that virtiofs is super fast
and that data has safely landed on HW, which isn't the case obviously.
Implement a ->sync_fs() superblock operation that sends a new FUSE_SYNCFS
request type for this purpose. Provision a 64-bit placeholder for possible
future extensions. Since the file server cannot handle the wait == 0 case,
we skip it to avoid a gratuitous roundtrip. Note that this is
per-superblock: a FUSE_SYNCFS is send for the root mount and for each
submount.
Like with FUSE_FSYNC and FUSE_FSYNCDIR, lack of support for FUSE_SYNCFS in
the file server is treated as permanent success. This ensures
compatibility with older file servers: the client will get the current
behavior of sync() not being propagated to the file server.
Note that such an operation allows the file server to DoS sync(). Since a
typical FUSE file server is an untrusted piece of software running in
userspace, this is disabled by default. Only enable it with virtiofs for
now since virtiofsd is supposedly trusted by the guest kernel.
Reported-by: Robert Krawitz <rlk@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Changing ucontext ABI response structure to pass wqe_mode to user library.
A flag in comp_mask has been set to indicate presence of wqe_mode.
Moved wqe-mode ABI to uapi/rdma/bnxt_re-abi.h
Link: https://lore.kernel.org/r/20210616202817.1185276-1-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A little bit of documentation covering the topics of engine discovery,
context engine maps and virtual engines. It is not very detailed but
supposed to be a starting point of giving a brief high level overview of
general principles and intended use cases.
v2:
* Have the text in uapi header and link from there.
v4:
* Link from driver-uapi.rst.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618150036.2507653-1-tvrtko.ursulin@linux.intel.com
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix
umem creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose queue
should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking
(staging: rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets
are validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xxUe
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
queue should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking (staging:
rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets are
validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing
wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel
egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming"
* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
net: ethernet: fix potential use-after-free in ec_bhf_remove
selftests/net: Add icmp.sh for testing ICMP dummy address responses
icmp: don't send out ICMP messages with a source address of 0.0.0.0
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
net: ll_temac: Fix TX BD buffer overwrite
net: ll_temac: Add memory-barriers for TX BD access
net: ll_temac: Make sure to free skb when it is completely used
MAINTAINERS: add Guvenc as SMC maintainer
bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
bnxt_en: Fix TQM fastpath ring backing store computation
bnxt_en: Rediscover PHY capabilities after firmware reset
cxgb4: fix wrong shift.
mac80211: handle various extensible elements correctly
mac80211: reset profile_periodicity/ema_ap
cfg80211: avoid double free of PMSR request
cfg80211: make certificate generation more robust
mac80211: minstrel_ht: fix sample time check
net: qed: Fix memcpy() overflow of qed_dcbx_params()
net: cdc_eem: fix tx fixup skb leak
net: hamradio: fix memory leak in mkiss_close
...
Modify the pr_info content from int to char *, this looks more readable.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.
Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.
Below is a quick example reproducing this issue with network namespaces:
ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel
With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <jch@irif.fr>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member named csum_enabled in struct mptcp_sock,
used a dummy mptcp_is_checksum_enabled() helper to initialize it.
Also added a new member named mptcpi_csum_enabled in struct mptcp_info
to expose the csum_enabled flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IETF RFC 8986 [1] includes the definition of SRv6 End.DT4, End.DT6, and
End.DT46 Behaviors.
The current SRv6 code in the Linux kernel only implements End.DT4 and
End.DT6 which can be used respectively to support IPv4-in-IPv6 and
IPv6-in-IPv6 VPNs. With End.DT4 and End.DT6 it is not possible to create a
single SRv6 VPN tunnel to carry both IPv4 and IPv6 traffic.
The proposed End.DT46 implementation is meant to support the decapsulation
of IPv4 and IPv6 traffic coming from a single SRv6 tunnel.
The implementation of the SRv6 End.DT46 Behavior in the Linux kernel
greatly simplifies the setup and operations of SRv6 VPNs.
The SRv6 End.DT46 Behavior leverages the infrastructure of SRv6 End.DT{4,6}
Behaviors implemented so far, because it makes use of a VRF device in
order to force the routing lookup into the associated routing table.
To make the End.DT46 work properly, it must be guaranteed that the routing
table used for routing lookup operations is bound to one and only one VRF
during the tunnel creation. Such constraint has to be enforced by enabling
the VRF strict_mode sysctl parameter, i.e.:
$ sysctl -wq net.vrf.strict_mode=1
Note that the same approach is used for the SRv6 End.DT4 Behavior and for
the End.DT6 Behavior in VRF mode.
The command used to instantiate an SRv6 End.DT46 Behavior is
straightforward, i.e.:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-enddt46-decapsulation-and-s
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Performance and impact of SRv6 End.DT46 Behavior on the SRv6 Networking
=======================================================================
This patch aims to add the SRv6 End.DT46 Behavior with minimal impact on
the performance of SRv6 End.DT4 and End.DT6 Behaviors.
In order to verify this, we tested the performance of the newly introduced
SRv6 End.DT46 Behavior and compared it with the performance of SRv6
End.DT{4,6} Behaviors, considering both the patched kernel and the kernel
before applying the End.DT46 patch (referred to as vanilla kernel).
In details, the following decapsulation scenarios were considered:
1.a) IPv6 traffic in SRv6 End.DT46 Behavior on patched kernel;
1.b) IPv4 traffic in SRv6 End.DT46 Behavior on patched kernel;
2.a) SRv6 End.DT6 Behavior (VRF mode) on patched kernel;
2.b) SRv6 End.DT4 Behavior on patched kernel;
3.a) SRv6 End.DT6 Behavior (VRF mode) on vanilla kernel (without the
End.DT46 patch);
3.b) SRv6 End.DT4 Behavior on vanilla kernel (without the End.DT46 patch).
All tests were performed on a testbed deployed on the CloudLab [2]
facilities. We considered IPv{4,6} traffic handled by a single core (at 2.4
GHz on a Xeon(R) CPU E5-2630 v3) on kernel 5.13-rc1 using packets of size
~ 100 bytes.
Scenario (1.a): average 684.70 kpps; std. dev. 0.7 kpps;
Scenario (1.b): average 711.69 kpps; std. dev. 1.2 kpps;
Scenario (2.a): average 690.70 kpps; std. dev. 1.2 kpps;
Scenario (2.b): average 722.22 kpps; std. dev. 1.7 kpps;
Scenario (3.a): average 690.02 kpps; std. dev. 2.6 kpps;
Scenario (3.b): average 721.91 kpps; std. dev. 1.2 kpps;
Considering the results for the patched kernel (1.a, 1.b, 2.a, 2.b) we
observe that the performance degradation incurred in using End.DT46 rather
than End.DT6 and End.DT4 respectively for IPv6 and IPv4 traffic is minimal,
around 0.9% and 1.5%. Such very minimal performance degradation is the
price to be paid if one prefers to use a single tunnel capable of handling
both types of traffic (IPv4 and IPv6).
Comparing the results for End.DT4 and End.DT6 under the patched and the
vanilla kernel (2.a, 2.b, 3.a, 3.b) we observe that the introduction of the
End.DT46 patch has no impact on the performance of End.DT4 and End.DT6.
[2] https://www.cloudlab.us
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a system with multiple ASICs, there is a need to provide monitoring
tools with information on how long a device was opened and how many
times a device was opened.
Therefore, we add a new opcode to the INFO ioctl to provide that
information.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Sometimes it is useful to allow the command to continue running despite
the timeout occurred, to differentiate between really stuck or just very
time consuming commands. This can be achieved by passing a new debug
flag alongside the cs, HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT.
Anyway, if the timeout occurred, a warning print shall be issued,
however this shall not fail the submission.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit in sched/urgent moved the cfs_rq_is_decayed() function:
a7b359fc6a: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
and this fresh commit in sched/core modified it in the old location:
9e077b52d8: ("sched/pelt: Check that *_avg are null when *_sum are")
Merge the two variants.
Conflicts:
kernel/sched/fair.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds a new "DMA Buffer ioctls" section to the dma-buf docs and adds
documentation for DMA_BUF_IOCTL_SYNC.
v2 (Daniel Vetter):
- Fix a couple typos
- Add commentary about synchronization with other devices
- Use item list format for describing flags
v3 (Pekka Paalanen):
- Clarify stalling requirements.
- Be more clear that that DMA_BUF_IOCTL_SYNC with SINC_END has to be
called before more GPU work happens.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617194258.579011-1-jason@jlekstrand.net
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Th_strings arrays netdev_features_strings, tunable_strings, and
phy_tunable_strings has been moved to file net/ethtool/common.c.
So fixes the comment.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This hypercall is used by the SEV guest to notify a change in the page
encryption status to the hypervisor. The hypercall should be invoked
only when the encryption attribute is changed from encrypted -> decrypted
and vice versa. By default all guest pages are considered encrypted.
The hypercall exits to userspace to manage the guest shared regions and
integrate with the userspace VMM's migration code.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <90778988e1ee01926ff9cac447aacb745f954c8c.1623174621.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a new version of KVM_GET_SREGS / KVM_SET_SREGS.
It has the following changes:
* Has flags for future extensions
* Has vcpu's PDPTRs, allowing to save/restore them on migration.
* Lacks obsolete interrupt bitmap (done now via KVM_SET_VCPU_EVENTS)
New capability, KVM_CAP_SREGS2 is added to signal
the userspace of this ioctl.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modeled after KVM_CAP_ENFORCE_PV_FEATURE_CPUID, the new capability allows
for limiting Hyper-V features to those exposed to the guest in Hyper-V
CPUIDs (0x40000003, 0x40000004, ...).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmDLL74ACgkQnJ2qBz9k
QNleSAf/XikH+tsM6K9yDEeU93GGSqKUB71n9clSQBIiGZ7/UliG0wotrUjec9Rg
vBTZlh3JEdfboeBei+mG3hmOdAoYK4HMsJJikqRGPyWOTujh1eOZlT1LOXaY5zNM
631A9pWe8edlpr4Mq7Wb4nO4FToEZ91iXDLliFF371aV8kP/yuv5ZjHwIn5Pt5gI
DPnWwaJ+meW9KZ4gVKAfvZLVkKFat2xJ9r2LDpqbIkH9SBcfjBmeHOy0gFyCKx6l
yma5iANgtWLhesP6ZwSeaRb1+T9altSLCCFZrYdKH9PXTMFUqzrbiZ8tfVmllePZ
GaUOWcHYiLmvqvXnaAREiHnMFT6prg==
=kevs
-----END PGP SIGNATURE-----
Merge tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and fanotify fixes from Jan Kara:
"A fixup finishing disabling of quotactl_path() syscall (I've missed
archs using different way to declare syscalls) and a fix of an fd leak
in error handling path of fanotify"
* tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: finish disable quotactl_path syscall
fanotify: fix copy_event_to_user() fid error clean up
io-wq defaults to per-node masks for IO workers. This works fine by
default, but isn't particularly handy for workloads that prefer more
specific affinities, for either performance or isolation reasons.
This adds IORING_REGISTER_IOWQ_AFF that allows the user to pass in a CPU
mask that is then applied to IO thread workers, and an
IORING_UNREGISTER_IOWQ_AFF that simply resets the masks back to the
default of per-node.
Note that no care is given to existing IO threads, they will need to go
through a reschedule before the affinity is correct if they are already
running or sleeping.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new optional expression that tells you when last matching on a
given rule / set element element has happened.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add support to collect more detailed SMC fallback reason statistics and
provide these statistics to user space on the netlink interface.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the netlink function which collects the statistics information and
delivers it to the userspace.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While events can already be enabled and disabled via the generic request
IOCTL, this bypasses the internal reference counting mechanism of the
controller. Due to that, disabling an event will turn it off regardless
of any other client having requested said event, which may break
functionality of that client.
To solve this, add IOCTLs wrapping the ssam_controller_event_enable()
and ssam_controller_event_disable() functions, which have been
previously introduced for this specific purpose.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, debugging unknown events requires writing a custom driver.
This is somewhat difficult, slow to adapt, and not entirely
user-friendly for quickly trying to figure out things on devices of some
third-party user. We can do better. We already have a user-space
interface intended for debugging SAM EC requests, so let's add support
for receiving events to that.
This commit provides support for receiving events by reading from the
controller file. It additionally introduces two new IOCTLs to control
which event categories will be forwarded. Specifically, a user-space
client can specify which target categories it wants to receive events
from by registering the corresponding notifier(s) via the IOCTLs and
after that, read the received events by reading from the controller
device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT
to check if the attached eBPF program is capable of migrating sockets. When
the eBPF program is attached, we run it for socket migration if the
expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or
net.ipv4.tcp_migrate_req is enabled.
Currently, the expected_attach_type is not enforced for the
BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the
earlier idea in the commit aac3fc320d ("bpf: Post-hooks for sys_bind") to
fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type().
Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to
select a new listener based on the child socket. migrating_sk varies
depending on if it is migrating a request in the accept queue or during
3WHS.
- accept_queue : sock (ESTABLISHED/SYN_RECV)
- 3WHS : request_sock (NEW_SYN_RECV)
In the eBPF program, we can select a new listener by
BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning
SK_DROP. This feature is useful when listeners have different settings at
the socket API level or when we want to free resources as soon as possible.
- SK_PASS with selected_sk, select it as a new listener
- SK_PASS with selected_sk NULL, fallbacks to the random selection
- SK_DROP, cancel the migration.
There is a noteworthy point. We select a listening socket in three places,
but we do not have struct skb at closing a listener or retransmitting a
SYN+ACK. On the other hand, some helper functions do not expect skb is NULL
(e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer()
in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb
temporarily before running the eBPF program.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
We will call sock_reuseport.prog for socket migration in the next commit,
so the eBPF program has to know which listener is closing to select a new
listener.
We can currently get a unique ID of each listener in the userspace by
calling bpf_map_lookup_elem() for BPF_MAP_TYPE_REUSEPORT_SOCKARRAY map.
This patch makes the pointer of sk available in sk_reuseport_md so that we
can get the ID by BPF_FUNC_get_socket_cookie() in the eBPF program.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201119001154.kapwihc2plp4f7zc@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-9-kuniyu@amazon.co.jp
In commit 5b9fedb31e ("quota: Disable quotactl_path syscall") Jan Kara
disabled quotactl_path syscall on several architectures.
This commit disables it on all architectures using unified list of
system calls:
- arm64
- arc
- csky
- h8300
- hexagon
- nds32
- nios2
- openrisc
- riscv (32/64)
CC: Jan Kara <jack@suse.cz>
CC: Christian Brauner <christian.brauner@ubuntu.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/lkml/20210512153621.n5u43jsytbik4yze@wittgenstein
Link: https://lore.kernel.org/r/20210614153712.313707-1-marcin@juszkiewicz.com.pl
Fixes: 5b9fedb31e ("quota: Disable quotactl_path syscall")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Signed-off-by: Jan Kara <jack@suse.cz>
Some of the commands have already been defined for the support of RAW
commands (to be blocked). Unlike their usage in the RAW interface, when
used through the supported interface, they will be coordinated and
marshalled along with other commands being issued by userspace and the
driver itself. That coordination will be added later.
The list of commands was determined based on the learnings from
libnvdimm and this list is provided directly from Dan.
Recommended-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210413140907.534404-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into tty-next
We want the tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into char-misc-next
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to create (and destroy) interfaces via a new
rtnetlink kind "wwan". The responsible driver has to use
the new wwan_register_ops() to make this possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases, for example in the upcoming WWAN framework changes,
there's no natural "parent netdev", so sometimes dummy netdevs are
created or similar. IFLA_PARENT_DEV_NAME is a new attribute intended to
contain a device (sysfs, struct device) name that can be used instead
when creating a new netdev, if the rtnetlink family implements it.
As suggested by Parav Pandit, we also introduce IFLA_PARENT_DEV_BUS_NAME
attribute in order to uniquely identify a device on the system (with
bus/name pair).
ip-link(8) support for the generic parent device attributes will help
us avoid code duplication, so no other link type will require a custom
code to handle the parent name attribute. E.g. the WWAN interface
creation command will looks like this:
$ ip link add wwan0-1 parent-dev wwan0 type wwan channel-id 1
So, some future subsystem (or driver) FOO will have an interface
creation command that looks like this:
$ ip link add foo1-3 parent-dev foo1 type foo bar-id 3 baz-type Y
Below is an example of dumping link info of a random device with these
new attributes:
$ ip --details link show wlp0s20f3
4: wlp0s20f3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DORMANT group default qlen 1000
...
parent_bus pci parent_dev 0000:00:14.3
Co-developed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Co-developed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=MbrN
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Just an API change for the registration changes that went into this
release. Better to get it sorted out now than before it's too late"
* tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
io_uring: add feature flag for rsrc tags
io_uring: change registration/upd/rsrc tagging ABI
VMware mks-guest-stats mechanism allows the collection of performance stats from
guest userland GL contexts, as well as from vmwgfx kernelspace, via a set of sw-
defined performance counters. The userspace performance counters are (de)registerd
with vmware-vmx-stats hypervisor via new iocts. The vmwgfx kernelspace counters
are controlled at build-time via a new config DRM_VMWGFX_MKSSTATS.
* Add vmw_mksstat_{add|remove|reset}_ioctl controlling the tracking of
mks-guest-stats in guest winsys contexts
* Add DRM_VMWGFX_MKSSTATS config to drivers/gpu/drm/vmwgfx/Kconfig controlling
the instrumentation of vmwgfx for kernelspace mks-guest-stats counters
* Instrument vmwgfx vmw_execbuf_ioctl to collect mks-guest-stats according to
DRM_VMWGFX_MKSSTATS
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-3-zackr@vmware.com
Add set of defines and constants for SOCK_SEQPACKET support
in vsock.
Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- remove redundant NULL checks by various people
- fix sparse checker warnings from Marc
- expose more GPU ID values to userspace from Christian
- add HWDB entry for GPU found on i.MX8MP from Sascha
- rework of the linear window calculation to better deal with
systems with large regions of reserved RAM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/f27e1ec2c2fea310bfb6fe6c99174a54e9dfba83.camel@pengutronix.de
Run the following command to find and remove the trailing spaces and tabs:
sed -r -i 's/[ \t]+$//' <audit_files>
The files to be checked are as follows:
kernel/audit*
include/linux/audit.h
include/uapi/linux/audit.h
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add IORING_FEAT_RSRC_TAGS indicating that io_uring supports a bunch of
new IORING_REGISTER operations, in particular
IORING_REGISTER_[FILES[,UPDATE]2,BUFFERS[2,UPDATE]] that support rsrc
tagging, and also indicating implemented dynamic fixed buffer updates.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b995d4045b6c6b4ab7510ca124fd25ac2203af7.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.
It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.
Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b554897a7c17ad6e3becc48dfed2f7af9f423d5.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The NLMSG_LENGTH(0) may confuse the API users,
NLMSG_HDRLEN is much more clear.
Besides, some code style problems are also fixed.
Signed-off-by: Chen Li <chenli@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this patch we add a section to document what userspace should do to
find out the CRTC index. This is important as they may be many places in
the documentation that need this, so it's better to just point to this
section and avoid repetition.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609230039.73307-2-leandro.ribeiro@collabora.com
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add nfgenmsg field to nfnetlink's struct nfnl_info and use it.
2) Remove nft_ctx_init_from_elemattr() and nft_ctx_init_from_setattr()
helper functions.
3) Add the nf_ct_pernet() helper function to fetch the conntrack
pernetns data area.
4) Expose TCP and UDP flowtable offload timeouts through sysctl,
from Oz Shlomo.
5) Add nfnetlink_hook subsystem to fetch the netfilter hook
pipeline configuration, from Florian Westphal. This also includes
a new field to annotate the hook type as metadata.
6) Fix unsafe memory access to non-linear skbuff in the new SCTP
chunk support for nft_exthdr, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This nfnl subsystem allows to dump the list of all active netfiler hooks,
e.g. defrag, conntrack, nf/ip/arp/ip6tables and so on.
This helps to see what kind of features are currently enabled in
the network stack.
Sample output from nft tool using this infra:
$ nft list hook ip input
family ip hook input {
+0000000010 nft_do_chain_inet [nf_tables] # nft table firewalld INPUT
+0000000100 nf_nat_ipv4_local_in [nf_nat]
+2147483647 ipv4_confirm [nf_conntrack]
}
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some users have pointed out that path-based syscalls are problematic in
some environments and at least directory fd argument and possibly also
resolve flags are desirable for such syscalls. Rather than
reimplementing all details of pathname lookup and following where it may
eventually evolve, let's go for full file descriptor based syscall
similar to how ioctl(2) works since the beginning. Managing of quotas
isn't performance sensitive so the extra overhead of open does not
matter and we are able to consume O_PATH descriptors as well which makes
open cheap anyway. Also for frequent operations (such as retrieving
usage information for all users) we can reuse single fd and in fact get
even better performance as well as avoiding races with possible remounts
etc.
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
netfilter and wireguard trees.
The bpf vs lockdown+audit fix is the most notable.
Current release - regressions:
- virtio-net: fix page faults and crashes when XDP is enabled
- mlx5e: fix HW timestamping with CQE compression, and make sure they
are only allowed to coexist with capable devices
- stmmac:
- fix kernel panic due to NULL pointer dereference of mdio_bus_data
- fix double clk unprepare when no PHY device is connected
Current release - new code bugs:
- mt76: a few fixes for the recent MT7921 devices and runtime
power management
Previous releases - regressions:
- ice: - track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
- fix allowing VF to request more/less queues via virtchnl
- correct supported and advertised autoneg by using PHY capabilities
- allow all LLDP packets from PF to Tx
- kbuild: quote OBJCOPY var to avoid a pahole call break the build
Previous releases - always broken:
- bpf, lockdown, audit: fix buggy SELinux lockdown permission checks
- mt76: address the recent FragAttack vulnerabilities not covered
by generic fixes
- ipv6: fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
- Bluetooth:
- fix the erroneous flush_work() order, to avoid double free
- use correct lock to prevent UAF of hdev object
- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect
- ieee802154: multiple fixes to error checking and return values
- igb: fix XDP with PTP enabled
- intel: add correct exception tracing for XDP
- tls: fix use-after-free when TLS offload device goes down and back up
- ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
- netfilter: nft_ct: skip expectations for confirmed conntrack
- mptcp: fix falling back to TCP in presence of out of order packets
early in connection lifetime
- wireguard: switch from O(n) to a O(1) algorithm for maintaining peers,
fixing stalls and a large memory leak in the process
Misc:
- devlink: correct VIRTUAL port to not have phys_port attributes
- Bluetooth: fix VIRTIO_ID_BT assigned number
- net: return the correct errno code ENOBUF -> ENOMEM
- wireguard:
- peer: allocate in kmem_cache saving 25% on peer memory
- do not use -O3
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sNP5
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless, netfilter and
wireguard trees.
The bpf vs lockdown+audit fix is the most notable.
Things haven't slowed down just yet, both in terms of regressions in
current release and largish fixes for older code, but we usually see a
slowdown only after -rc5.
Current release - regressions:
- virtio-net: fix page faults and crashes when XDP is enabled
- mlx5e: fix HW timestamping with CQE compression, and make sure they
are only allowed to coexist with capable devices
- stmmac:
- fix kernel panic due to NULL pointer dereference of
mdio_bus_data
- fix double clk unprepare when no PHY device is connected
Current release - new code bugs:
- mt76: a few fixes for the recent MT7921 devices and runtime power
management
Previous releases - regressions:
- ice:
- track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
- fix allowing VF to request more/less queues via virtchnl
- correct supported and advertised autoneg by using PHY
capabilities
- allow all LLDP packets from PF to Tx
- kbuild: quote OBJCOPY var to avoid a pahole call break the build
Previous releases - always broken:
- bpf, lockdown, audit: fix buggy SELinux lockdown permission checks
- mt76: address the recent FragAttack vulnerabilities not covered by
generic fixes
- ipv6: fix KASAN: slab-out-of-bounds Read in
fib6_nh_flush_exceptions
- Bluetooth:
- fix the erroneous flush_work() order, to avoid double free
- use correct lock to prevent UAF of hdev object
- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed
connect
- ieee802154: multiple fixes to error checking and return values
- igb: fix XDP with PTP enabled
- intel: add correct exception tracing for XDP
- tls: fix use-after-free when TLS offload device goes down and back
up
- ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
- netfilter: nft_ct: skip expectations for confirmed conntrack
- mptcp: fix falling back to TCP in presence of out of order packets
early in connection lifetime
- wireguard: switch from O(n) to a O(1) algorithm for maintaining
peers, fixing stalls and a large memory leak in the process
Misc:
- devlink: correct VIRTUAL port to not have phys_port attributes
- Bluetooth: fix VIRTIO_ID_BT assigned number
- net: return the correct errno code ENOBUF -> ENOMEM
- wireguard:
- peer: allocate in kmem_cache saving 25% on peer memory
- do not use -O3"
* tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: avoid link re-train during TC-MQPRIO configuration
sch_htb: fix refcount leak in htb_parent_to_leaf_offload
wireguard: allowedips: free empty intermediate nodes when removing single node
wireguard: allowedips: allocate nodes in kmem_cache
wireguard: allowedips: remove nodes in O(1)
wireguard: allowedips: initialize list head in selftest
wireguard: peer: allocate in kmem_cache
wireguard: use synchronize_net rather than synchronize_rcu
wireguard: do not use -O3
wireguard: selftests: make sure rp_filter is disabled on vethc
wireguard: selftests: remove old conntrack kconfig value
virtchnl: Add missing padding to virtchnl_proto_hdrs
ice: Allow all LLDP packets from PF to Tx
ice: report supported and advertised autoneg using PHY capabilities
ice: handle the VF VSI rebuild failure
ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared
ice: Fix allowing VF to request more/less queues via virtchnl
virtio-net: fix for skb_over_panic inside big mode
ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
fib: Return the correct errno code
...
Add a flag to define yellow carp series.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The value of the AFBC_FEATURES register is required by userspace to
determine AFBC support on Bifrost. A user on our IRC channel (#panfrost)
reported a workload that raised a fault on one system's Mali G31 but
worked flawlessly with another system's Mali G31. We determined the
cause to be missing AFBC support on one vendor's Mali implementation --
it turns out AFBC is optional on Bifrost!
Whether AFBC is supported or not is exposed in the AFBC_FEATURES
register on Bifrost, which reads back as 0 on Midgard. A zero value
indicates AFBC is fully supported, provided the architecture itself
supports AFBC, allowing backwards-compatibility with Midgard. Bits 0 and
15 indicate that AFBC support is absent for texturing and rendering
respectively.
The user experiencing the fault reports that AFBC_FEATURES reads back
0x10001 on their system, confirming the architectural lack of AFBC.
Userspace needs this parameter to know to disable AFBC on that
chip, and perhaps others.
v2: Fix typo from copy-paste fail.
v3: Bump the UABI version. This commit was cherry-picked from another
series so chalking this up to a rebase fail.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210604130011.3203-1-alyssa.rosenzweig@collabora.com
The audio, video and OSD APIs are used upstream only by the
av7110 driver, which was moved to staging.
So, move the corresponding header files to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Fixes UAF and CVE-2021-3564
- Fix VIRTIO_ID_BT to use an unassigned ID
- Fix firmware loading on some Intel Controllers
-----BEGIN PGP SIGNATURE-----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=X9Cg
-----END PGP SIGNATURE-----
Merge tag 'for-net-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
bluetooth pull request for net:
- Fixes UAF and CVE-2021-3564
- Fix VIRTIO_ID_BT to use an unassigned ID
- Fix firmware loading on some Intel Controllers
Signed-off-by: David S. Miller <davem@davemloft.net>
Including <linux/in.h> and <netinet/in.h> in the dependencies breaks
compilation of trinity due to multiple definitions. <linux/in.h> is only
used in <linux/icmp.h> to provide the definition of the struct in_addr,
but this can be substituted out by using the datatype __be32.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It turned out that the VIRTIO_ID_* are not assigned in the virtio_ids.h
file in the upstream kernel. Picking the next free one was wrong and
there is a process that has been followed now.
See https://github.com/oasis-tcs/virtio-spec/issues/108 for details.
Fixes: afd2daa26c ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
amd-drm-next-5.14-2021-06-02:
amdgpu:
- GC/MM register access macro clean up for SR-IOV
- Beige Goby updates
- W=1 Fixes
- Aldebaran fixes
- Misc display fixes
- ACPI ATCS/ATIF handling rework
- SR-IOV fixes
- RAS fixes
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes for suspend/resume
- More buffer object subclassing work
- Add new INFO query for additional vbios information
- Add new placement for preemptable SG buffers
amdkfd:
- Misc fixes
radeon:
- W=1 Fixes
- Misc cleanups
UAPI:
- Add new INFO query for additional vbios information
Useful for debugging vbios related issues. Proposed umr patch:
https://patchwork.freedesktop.org/patch/433297/
- 16bpc fixed point format support
IGT test:
https://lists.freedesktop.org/archives/igt-dev/2021-May/031507.html
Proposed Vulkan patch:
a25d480207
- Add a new GEM flag which is only used internally in the kernel driver. Userspace
is not allowed to set it.
drm:
- 16bpc fixed point format fourcc
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602214009.4553-1-alexander.deucher@amd.com
Shiraz Saleem says:
====================
Add Intel Ethernet Protocol Driver for RDMA (irdma)
The following patch series introduces a unified Intel Ethernet Protocol
Driver for RDMA (irdma) for the X722 iWARP device and a new E810 device
which supports iWARP and RoCEv2. The irdma module replaces the legacy
i40iw module for X722 and extends the ABI already defined for i40iw. It is
backward compatible with legacy X722 rdma-core provider (libi40iw).
X722 and E810 are PCI network devices that are RDMA capable. The RDMA
block of this parent device is represented via an auxiliary device
exported to 'irdma' using the core auxiliary bus infrastructure recently
added for 5.11 kernel. The parent PCI netdev drivers 'i40e' and 'ice'
register auxiliary RDMA devices with private data/ops encapsulated that
bind to auxiliary drivers registered in irdma module.
Currently, default is RoCEv2 for E810. Runtime support for protocol switch
to iWARP will be made available via devlink in a future patch.
====================
Link: https://lore.kernel.org/r/20210602205138.889-1-shiraz.saleem@intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* branch 'irdma':
RDMA/irdma: Update MAINTAINERS file
RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw
RDMA/irdma: Add ABI definitions
RDMA/irdma: Add dynamic tracing for CM
RDMA/irdma: Add miscellaneous utility definitions
RDMA/irdma: Add user/kernel shared libraries
RDMA/irdma: Add RoCEv2 UD OP support
RDMA/irdma: Implement device supported verb APIs
RDMA/irdma: Add PBLE resource manager
RDMA/irdma: Add connection manager
RDMA/irdma: Add QoS definitions
RDMA/irdma: Add privileged UDA queue implementation
RDMA/irdma: Add HMC backing store setup functions
RDMA/irdma: Implement HW Admin Queue OPs
RDMA/irdma: Implement device initialization definitions
RDMA/irdma: Register auxiliary driver and implement private channel OPs
i40e: Register auxiliary devices to provide RDMA
i40e: Prep i40e header for aux bus conversion
ice: Register auxiliary device to provide RDMA
ice: Implement iidc operations
ice: Initialize RDMA support
iidc: Introduce iidc.h
i40e: Replace one-element array with flexible-array member
Add Kconfig and Makefile to build irdma driver.
Remove i40iw driver and add an alias in irdma.
Remove legacy exported symbols i40e_register_client
and i40e_unregister_client from i40e as they are no
longer used.
irdma is the replacement driver that supports X722.
Link: https://lore.kernel.org/r/20210602205138.889-16-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement device supported verb APIs. The supported APIs
vary based on the underlying transport the ibdev is
registered as (i.e. iWARP or RoCEv2).
Link: https://lore.kernel.org/r/20210602205138.889-10-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor DEVLINK_CMD_RATE_{GET|SET} command handlers to support setting
a node as a parent for another rate object (leaf or node) by means of
new attribute DEVLINK_ATTR_RATE_PARENT_NODE_NAME. Extend devlink ops
with new callbacks rate_{leaf|node}_parent_set() to set node as a parent
for rate object to allow supporting drivers to implement rate grouping
through devlink. Driver implementations are allowed to support leafs
or node children only. Invoking callback with NULL as parent should be
threated by the driver as unset parent action.
Extend rate object struct with reference counter to disallow deleting a
node with any child pointing to it. User should unset parent for the
child explicitly.
Example:
$ devlink port function rate add netdevsim/netdevsim10/group1
$ devlink port function rate add netdevsim/netdevsim10/group2
$ devlink port function rate set netdevsim/netdevsim10/group1 parent group2
$ devlink port function rate show netdevsim/netdevsim10/group1
netdevsim/netdevsim10/group1: type node parent group2
$ devlink port function rate set netdevsim/netdevsim10/group1 noparent
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for DEVLINK_CMD_RATE_{NEW|DEL} commands that are used
to create and delete devlink rate nodes. Add new attribute
DEVLINK_ATTR_RATE_NODE_NAME that specify node name string. The node name
is an alphanumeric identifier. No valid node name can be a devlink port
index, eg. decimal number. Extend devlink ops with new callbacks
rate_node_{new|del}() and rate_node_tx_{share|max}_set() to allow
supporting drivers to implement ports rate grouping and setting tx rate
of rate nodes through devlink.
Expose devlink_rate_nodes_destroy() function to allow vendor driver do
proper cleanup of internally allocated resources for the nodes if the
driver goes down or due to any other reasons which requires nodes to be
destroyed.
Disallow moving device from switchdev to legacy mode if any node exists
on that device. User must explicitly delete nodes before switching mode.
Example:
$ devlink port function rate add netdevsim/netdevsim10/group1
$ devlink port function rate set netdevsim/netdevsim10/group1 \
tx_share 10mbit tx_max 100mbit
Add + set command can be combined:
$ devlink port function rate add netdevsim/netdevsim10/group1 \
tx_share 10mbit tx_max 100mbit
$ devlink port function rate show netdevsim/netdevsim10/group1
netdevsim/netdevsim10/group1: type node tx_share 10mbit tx_max 100mbit
$ devlink port function rate del netdevsim/netdevsim10/group1
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for DEVLINK_CMD_RATE_SET command with new attributes
DEVLINK_ATTR_RATE_TX_{SHARE|MAX} that are used to set devlink rate
shared/max tx rate values. Extend devlink ops with new callbacks
rate_leaf_tx_{share|max}_set() to allow supporting drivers to implement
rate control through devlink.
New attributes are optional. Driver implementations are allowed to
support either or both of them.
Shared rate example:
$ devlink port function rate set netdevsim/netdevsim10/0 tx_share 10mbit
$ devlink port function rate show netdevsim/netdevsim10/0
netdevsim/netdevsim10/0: type leaf tx_share 10mbit
Max rate example:
$ devlink port function rate set netdevsim/netdevsim10/0 tx_max 100mbit
$ devlink port function rate show netdevsim/netdevsim10/0
netdevsim/netdevsim10/0: type leaf tx_max 100mbit
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow registering rate object for devlink ports with dedicated
devlink_rate_leaf_{create|destroy}() API. Implement new netlink
DEVLINK_CMD_RATE_GET command that is used to retrieve rate object info.
Add new DEVLINK_CMD_RATE_{NEW|DEL} commands that are used for
notifications when creating/deleting leaf rate object.
Rate API is intended to be used for rate limiting of individual
devlink ports (leafs) and their aggregates (nodes).
Example:
$ devlink port show
pci/0000:03:00.0/0
pci/0000:03:00.0/1
$ devlink port function rate show
pci/0000:03:00.0/0: type leaf
pci/0000:03:00.0/1: type leaf
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace BIT() in v4l2's UPAI header with _BITUL(). BIT() is not defined
in the UAPI headers and its usage may cause userspace build errors.
Fixes: 206bc0f6fb ("media: vicodec: mark the stateless FWHT API as stable")
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the audio_out_delay value is unused, then set it to 1, not 0.
The value 0 is reserved, and 1 is a much safer value since it
translates to a delay of (1 - 1) * 2 = 0 ms.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmC0CoEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG8qYH/0bJOUUsj4fsBHY+
1fSTcbEZYxrdO6nYOzk34UZBeC7rGdhpFFVCU0fh/il8ec3K8pU9ypZykhvpFwGD
cY0zrfaNiEcsIinYZh/tMyfPK3JMqGrcOkKqYli5kSfW9BR0YzHBeiETcHMyZfMu
a8uI9nNYIZda0hwrXMbMNaFMH4Nif3kXwDxNNrx1THaTYifVZK+IwlM8TpcSPIK/
eNbU+5G/VBiQ9YE4PZyXVbsWMZcJ9NDRanx6aKMYTlwSDytxmd5HlURKJcfOiXnQ
AQq9VYbkkuw6FhBPnWvkYVJj1UwkySXjXyZkTiIH8iIMpJ406rWrQgIaQPI3o/98
iVDfH9k=
=t88B
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc4' into media_tree
Linux 5.13-rc4
* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
Documentation: seccomp: Fix user notification documentation
MAINTAINERS: adjust to removing i2c designware platform data
perf vendor events powerpc: Fix eventcode of power10 JSON events
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
perf stat: Fix error check for bpf_program__attach
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
...
UAPI Changes:
- Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel)
Driver Changes:
- Fix for Gitlab issues #3293 and #3450:
Avoid kernel crash on older L-shape memory machines
- Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya)
- Fix crash in auto_retire active retire callback due to
misalignment (Stephane)
- Fix overlay active retire callback alignment (Tvrtko)
- Eliminate need to align active retire callbacks (Matt A, Ville,
Daniel)
- Program FF_MODE2 tuning value for all Gen12 platforms (Caz)
- Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi)
- Create stolen memory region from local memory on DG1 (CQ)
- Place PD in LMEM on dGFX (Matt A)
- Use WC when default state object is allocated in LMEM (Venkata)
- Determine the coherent map type based on object location (Venkata)
- Use lmem physical addresses for fb_mmap() on discrete (Mohammed)
- Bypass aperture on fbdev when LMEM is available (Anusha)
- Return error value when displayable BO not in LMEM for dGFX (Mohammed)
- Do release kernel context if breadcrumb measure fails (Janusz)
- Hide modparams for compiled-out features (Tvrtko)
- Apply Wa_22010271021 for all Gen11 platforms (Caz)
- Fix unlikely ref count race in arming the watchdog timer (Tvrtko)
- Check actual RC6 enable status in PMU (Tvrtko)
- Fix a double free in gen8_preallocate_top_level_pdp (Lv)
- Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten)
- Remove erroneous i915_is_ggtt check for
I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten)
- Convert uAPI headers to real kerneldoc (Matt A)
- Clean up kerneldoc warnings headers (Matt A, Maarten)
- Fail driver if LMEM training failed (Matt R)
- Avoid div-by-zero on Gen2 (Ville)
- Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville)
- Remove reference to struct drm_device.pdev (Thomas)
- Increase separation between GuC and execlists code (Chris, Matt B)
- Use might_alloc() (Bernard)
- Split DGFX_FEATURES from GEN12_FEATURES (Lucas)
- Deduplicate Wa_22010271021 programming on (Jose)
- Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko)
- Selftest improvements (Chris, Hsin-Yi, Tvrtko)
- Shuffle around init_memory_region for stolen (Matt)
- Typo fixes (wengjianfeng)
[airlied: fix conflict with fixes in i915_active.c]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com
Pull HID fixes from Jiri Kosina:
- memory leak fix in usbhid from Anirudh Rayabharam
- additions for a few new recognized generic key IDs from Dmitry
Torokhov
- Asus T101HA and Dell K15A quirks from Hans de Goede
- memory leak fix in amd_sfh from Basavaraj Natikar
- Win8 compatibility and Stylus fixes in multitouch driver from
Ahelenia Ziemiańska
- NULL pointer dereference fix in hid-magicmouse from Johan Hovold
- assorted other small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (33 commits)
HID: asus: Cleanup Asus T101HA keyboard-dock handling
HID: magicmouse: fix NULL-deref on disconnect
HID: intel-ish-hid: ipc: Add Alder Lake device IDs
HID: i2c-hid: fix format string mismatch
HID: amd_sfh: Fix memory leak in amd_sfh_work
HID: amd_sfh: Use devm_kzalloc() instead of kzalloc()
HID: ft260: improve error handling of ft260_hid_feature_report_get()
HID: magicmouse: fix crash when disconnecting Magic Trackpad 2
HID: gt683r: add missing MODULE_DEVICE_TABLE
HID: pidff: fix error return code in hid_pidff_init()
HID: logitech-hidpp: initialize level variable
HID: multitouch: Disable event reporting on suspend on the Asus T101HA touchpad
HID: core: Remove extraneous empty line before EXPORT_SYMBOL_GPL(hid_check_keys_pressed)
HID: hid-sensor-custom: Process failure of sensor_hub_set_feature()
HID: i2c-hid: Skip ELAN power-on command after reset
HID: usbhid: fix info leak in hid_submit_ctrl
HID: Add BUS_VIRTUAL to hid_connect logging
HID: multitouch: set Stylus suffix for Stylus-application devices, too
HID: multitouch: require Finger field to mark Win8 reports as MT
HID: remove the unnecessary redefinition of a macro
...
Add AMDGPU_INFO_VBIOS_INFO subquery id for detailed vbios info.
Provides a way for the user application to get the VBIOS
information without having to parse the binary.
It is useful for the user to be able to display in a simple way the VBIOS
version in their system if they happen to encounter an issue.
V2:
Use numeric serial.
Parse and expose vbios version string.
V3:
Remove redundant data in drm_amdgpu_info_vbios struct.
V4:
64 bit alignment in drm_amdgpu_info_vbios.
v5: squash together all the reverts, etc. (Alex)
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Support for SCTP chunks matching on nf_tables, from Phil Sutter.
2) Skip LDMXCSR, we don't need a valid MXCSR state. From Stefano Brivio.
3) CONFIG_RETPOLINE for nf_tables set lookups, from Florian Westphal.
4) A few Kconfig leading spaces removal, from Juerg Haefliger.
5) Remove spinlock from xt_limit, from Jason Baron.
6) Remove useless initialization in xt_CT, oneliner from Yang Li.
7) Tree-wide replacement of netlink_unicast() by nfnetlink_unicast().
8) Reduce footprint of several structures: xt_action_param,
nft_pktinfo and nf_hook_state, from Florian.
10) Add nft_thoff() and nft_sk() helpers and use them, also from Florian.
11) Fix documentation in nf_tables pipapo avx2, from Florian Westphal.
12) Fix clang-12 fmt string warnings, also from Florian.
====================
Adding support for MAPv5 egress packets.
This involves adding the MAPv5 header and setting the csum_valid_required
in the checksum header to request HW compute the checksum.
Corresponding stats are incremented based on whether the checksum is
computed in software or HW.
New stat has been added which represents the count of packets whose
checksum is calculated by the HW.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding support for processing of MAPv5 downlink packets.
It involves parsing the Mapv5 packet and checking the csum header
to know whether the hardware has validated the checksum and is
valid or not.
Based on the checksum valid bit the corresponding stats are
incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY
or left as CHEKSUM_NONE to let network stack revalidate the checksum
and update the respective snmp stats.
Current MAPV1 header has been modified, the reserved field in the
Mapv1 header is now used for next header indication.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit dab741e0e0 ("Add a "nosymfollow" mount option.") added support
for the "nosymfollow" mount option allowing to block following symlinks
when resolving paths. The mount option so far was only available in the
old mount api. Make it available in the new mount api as well. Bonus is
that it can be applied to a whole subtree not just a single mount.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <zwisler@google.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The kernel versions including the following commits are referenced:
DRM_CLIENT_CAP_STEREO_3D
61d8e32825 ("drm: Add a STEREO_3D capability to the SET_CLIENT_CAP ioctl")
DRM_CLIENT_CAP_UNIVERSAL_PLANES
681e7ec730 ("drm: Allow userspace to ask for universal plane list (v2)")
c7dbc6c9ae ("drm: Remove command line guard for universal planes")
DRM_CLIENT_CAP_ATOMIC
88a48e297b ("drm: add atomic properties")
8b72ce158c ("drm: Always enable atomic API")
DRM_CLIENT_CAP_ASPECT_RATIO
7595bda2fb ("drm: Add DRM client cap for aspect-ratio")
DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
d67b6a2065 ("drm: writeback: Add client capability for exposing writeback connectors")
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434202/
Make it clear that the client is responsible for enabling ATOMIC
prior to enabling WRITEBACK_CONNECTORS. Linkify the reference to
ATOMIC.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434200/
In the docs for DRM_CLIENT_CAP_STEREO_3D and
DRM_CLIENT_CAP_ASPECT_RATIO, reference the DRM_MODE_FLAG_* defines
that get set when the cap is enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434201/
* Another state update on exit to userspace fix
* Prevent the creation of mixed 32/64 VMs
* Fix regression with irqbypass not restarting the guest on failed connect
* Fix regression with debug register decoding resulting in overlapping access
* Commit exception state on exit to usrspace
* Fix the MMU notifier return values
* Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
* fix guest missed wakeup with assigned devices
* fix WARN reported by syzkaller
* do not use BIT() in UAPI headers
* make the kvm_amd.avic parameter bool
PPC fixes:
* make halt polling heuristics consistent with other architectures
selftests:
* various fixes
* new performance selftest memslot_perf_test
* test UFFD minor faults in demand_paging_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCyF0MUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOHSgf/Q4Hm5e12Bj2xJy6A+iShnrbbT8PW
hcIIOA7zGWXfjVYcBV7anbj7CcpzfIz0otcRBABa5mkhj+fb3YmPEb0EzCPi4Hru
zxpcpB2w7W7WtUOIKe2EmaT+4Pk6/iLcfr8UMHMqx460akE9OmIg10QNWai3My/3
RIOeakSckBI9e/1TQZbxH66dsLwCT0lLco7i7AWHdFxkzUQyoA34HX5pczOCBsO5
3nXH+/txnRVhqlcyzWLVVGVzFqmpHtBqkIInDOXfUqIoxo/gOhOgF1QdMUEKomxn
5ZFXlL5IXNtr+7yiI67iHX7CWkGZE9oJ04TgPHn6LR6wRnVvc3JInzcB5Q==
=ollO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
Chunks are SCTP header extensions similar in implementation to IPv6
extension headers or TCP options. Reusing exthdr expression to find and
extract field values from them is therefore pretty straightforward.
For now, this supports extracting data from chunks at a fixed offset
(and length) only - chunks themselves are an extensible data structure;
in order to make all fields available, a nested extension search is
needed.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmCvTYUTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqTxPB/4xVeasYKcyinylU7adBp9HFIvKjOiK
TpxQ7h4EhjJxkmQyONP529ZeQ5sjbnbc9IGkDQNhhVVm764LnEJ01aIi+kMtRs+M
szAGbWcITSyv4iaYCcKtNDSi2m74TK4gtRhsKItkIBRAZCs5jb54DSjWae7cGH0A
M/ts6WbYTbp89Lmww3mYtQ4dpmqvk/gXNbzKicrs2uGbPg0YTyq8rAQztt4yFaQR
9cBzxnwcfgvTz/uihkItiClv7kZIYjwzFB8BO1S2qx0TaUE1n78uiuuzcIdfvPt8
TKap7pwnjLYYToHokcWaU2t8Nd1Hy3KCaHuYO54TdXM4KYODJmbPydER
=pVNd
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
can-next 2021-05-27
The first 2 patches are by Geert Uytterhoeven and convert the rcan_can
and rcan_canfd device tree bindings to yaml.
The next 2 patches are by Oliver Hartkopp and me and update the CAN
uapi headers.
zuoqilin's patch removes an unnecessary variable from the CAN proc
code.
Patrick Menschel contributes 3 patches for CAN ISOTP to enhance the
error messages.
Jiapeng Chong's patch removes two dead stores from the softing driver.
The next 4 patches are by me and silence several warnings found by
clang compiler.
Jimmy Assarsson's patches for the kvaser_usb driver add support for
the Kvaser hydra devices.
Dario Binacchi provides 2 patches for the c_can driver, first removing
an unused variable, then adding basic ethtool support to query driver
and ring parameter info.
The last 4 patches are by Torin Cooper-Bennun and clean up the m_can
driver.
* tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (21 commits)
can: m_can: fix whitespace in a few comments
can: m_can: make TXESC, RXESC config more explicit
can: m_can: clean up CCCR reg defs, order by revs
can: m_can: use bits.h macros for all regmasks
can: c_can: add ethtool support
can: c_can: remove unused variable struct c_can_priv::rxmasked
can: kvaser_usb: Add new Kvaser hydra devices
can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID
can: at91_can: silence clang warning
can: mcp251xfd: silence clang warning
can: mcp251x: mcp251x_can_probe(): silence clang warning
can: hi311x: hi3110_can_probe(): silence clang warning
can: softing: Remove redundant variable ptr
can: isotp: Add error message if txqueuelen is too small
can: isotp: add symbolic error message to isotp_module_init()
can: isotp: change error format from decimal to symbolic error names
can: proc: remove unnecessary variables
can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame
can: uapi: update CAN-FD frame description
dt-bindings: can: rcar_canfd: Convert to json-schema
...
====================
Link: https://lore.kernel.org/r/20210527084532.1384031-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These are 16 bits per color channel unsigned normalized formats.
They are supported by at least AMD display hw, and suitable for
direct scanout of Vulkan swapchain images in the format
VK_FORMAT_R16G16B16A16_UNORM.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace BIT() in KVM's UPAI header with _BITUL(). BIT() is not defined
in the UAPI headers and its usage may cause userspace build errors.
Fixes: fb04a1eddb ("KVM: X86: Implement ring-based dirty memory tracking")
Signed-off-by: Joe Richey <joerichey@google.com>
Message-Id: <20210521085849.37676-3-joerichey94@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmCqzFgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIgQH/3nAV/fYbUCubEQe
RXUcjMGznIpdHeMiY/hPezObYnpBI3UAi2JwHCvQfoE8ckbx4tq8Xp+TUWebsdaf
zpDhKXDj2jHha1f5AixHCn1UFxiqOSn3d2muY2Bh1Nhg7iJuzU8xjIMCcOdss+fp
8e4wqidOHkpWvGJ96CQ5zCNxeXI+/f7VX2IgdJ+RCDwzbqJlIvvXwAkg1KrguUEz
EPmhpODqjPbVVc/mhtguMLMWl78WKCTBOSHCcYBolatXfm2ojsnX1hXprypWY4Mg
vKXxF/91AS8InCC08Jw+puz+fXDBx1jtNmFFhDOFTyz/TvwPaKZiWbAeXOZFJA2Z
Wm4su7g=
=cqxg
-----END PGP SIGNATURE-----
Merge v5.13-rc3 into drm-next
drm/i915 is extremely on fire without the below revert from -rc3:
commit 293837b9ac
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed May 19 05:55:57 2021 -1000
Revert "i915: fix remap_io_sg to verify the pgprot"
Backmerge so we don't have a too wide bisect window for anything
that's a more involved workload than booting the driver.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The struct can_frame and struct canfd_frame intentionally share the
same layout to be able to write CAN frame content into a CAN FD frame
structure. When this is done the former differentiation via CAN_MTU /
CANFD_MTU is lost. CANFD_FDF allows programmers to mark CAN FD frames
in the case of using struct canfd_frame for mixed CAN/CAN FD
content (dual use).
N.B. the Kernel APIs do NOT provide mixed CAN / CAN FD content inside
of struct canfd_frame therefore the CANFD_FDF flag is disregarded by
Linux.
Link: https://lore.kernel.org/r/20170411134343.3089-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since an early version of the CAN-FD specification the bit that
defines a CAN-FD frame on the wire, has been renamed from Extended
Data Length (EDL) to FD Frame (FDF).
To avoid confusion, update the struct canfd_frame description in the
UAPI headers accordingly.
Link: https://lore.kernel.org/r/20210517113727.77597-1-mkl@pengutronix.de
Suggested-by: Ayoub Kaanich <kayoub5@live.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds two flags BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS to
extend xdp_redirect_map for broadcast support.
With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces
in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be
excluded when do broadcasting.
When getting the devices in dev hash map via dev_map_hash_get_next_key(),
there is a possibility that we fall back to the first key when a device
was removed. This will duplicate packets on some interfaces. So just walk
the whole buckets to avoid this issue. For dev array map, we also walk the
whole map to find valid interfaces.
Function bpf_clear_redirect_map() was removed in
commit ee75aef23a ("bpf, xdp: Restructure redirect actions").
Add it back as we need to use ri->map again.
With test topology:
+-------------------+ +-------------------+
| Host A (i40e 10G) | ---------- | eno1(i40e 10G) |
+-------------------+ | |
| Host B |
+-------------------+ | |
| Host C (i40e 10G) | ---------- | eno2(i40e 10G) |
+-------------------+ | |
| +------+ |
| veth0 -- | Peer | |
| veth1 -- | | |
| veth2 -- | NS | |
| +------+ |
+-------------------+
On Host A:
# pktgen/pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -s 64
On Host B(Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz, 128G Memory):
Use xdp_redirect_map and xdp_redirect_map_multi in samples/bpf for testing.
All the veth peers in the NS have a XDP_DROP program loaded. The
forward_map max_entries in xdp_redirect_map_multi is modify to 4.
Testing the performance impact on the regular xdp_redirect path with and
without patch (to check impact of additional check for broadcast mode):
5.12 rc4 | redirect_map i40e->i40e | 2.0M | 9.7M
5.12 rc4 | redirect_map i40e->veth | 1.7M | 11.8M
5.12 rc4 + patch | redirect_map i40e->i40e | 2.0M | 9.6M
5.12 rc4 + patch | redirect_map i40e->veth | 1.7M | 11.7M
Testing the performance when cloning packets with the redirect_map_multi
test, using a redirect map size of 4, filled with 1-3 devices:
5.12 rc4 + patch | redirect_map multi i40e->veth (x1) | 1.7M | 11.4M
5.12 rc4 + patch | redirect_map multi i40e->veth (x2) | 1.1M | 4.3M
5.12 rc4 + patch | redirect_map multi i40e->veth (x3) | 0.8M | 2.6M
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-3-liuhangbin@gmail.com
Extend the existing bpf_map_lookup_and_delete_elem() functionality to
hashtab map types, in addition to stacks and queues.
Create a new hashtab bpf_map_ops function that does lookup and deletion
of the element under the same bucket lock and add the created map_ops to
bpf.h.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/4d18480a3e990ffbf14751ddef0325eed3be2966.1620763117.git.denis.salopek@sartura.hr
Until now, the MPEG-2 V4L2 API was not exported as a public API,
and only defined in a private media header (media/mpeg2-ctrls.h).
After reviewing the MPEG-2 specification in detail, and reworking
the controls so they match the MPEG-2 semantics properly,
we can consider it ready.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the MPEG-2 stateless control types out of staging,
and re-number it to avoid any confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
SG BOs such as dmabuf imports and userptr BOs do not consume system
resources directly. Instead they point to resources owned elsewhere.
They typically get evicted by DMABuf move notifiers of MMU notifiers.
If those notifiers don't need to wait for hardware fences (i.e. the SG
BOs are used in a preemptible context), then we don't need to limit
them to the GTT size and we don't need TTM to evict them.
Create a new placement for such preemptible SG BOs that does not impose
artificial size limits and TTM evictions.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull siginfo fix from Eric Biederman:
"During the merge window an issue with si_perf and the siginfo ABI came
up. The alpha and sparc siginfo structure layout had changed with the
addition of SIGTRAP TRAP_PERF and the new field si_perf.
The reason only alpha and sparc were affected is that they are the
only architectures that use si_trapno.
Looking deeper it was discovered that si_trapno is used for only a few
select signals on alpha and sparc, and that none of the other
_sigfault fields past si_addr are used at all. Which means technically
no regression on alpha and sparc.
While the alignment concerns might be dismissed the abuse of si_errno
by SIGTRAP TRAP_PERF does have the potential to cause regressions in
existing userspace.
While we still have time before userspace starts using and depending
on the new definition siginfo for SIGTRAP TRAP_PERF this set of
changes cleans up siginfo_t.
- The si_trapno field is demoted from magic alpha and sparc status
and made an ordinary union member of the _sigfault member of
siginfo_t. Without moving it of course.
- si_perf is replaced with si_perf_data and si_perf_type ending the
abuse of si_errno.
- Unnecessary additions to signalfd_siginfo are removed"
* 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
signal: Deliver all of the siginfo perf data in _perf
signal: Factor force_sig_perf out of perf_sigtrap
signal: Implement SIL_FAULT_TRAPNO
siginfo: Move si_trapno inside the union inside _si_fault
This file has been updated many times since 2010.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
amd-drm-next-5.14-2021-05-19:
amdgpu:
- Aldebaran updates
- More LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- RAS fixes
- PCIe ASPM support
- Modifier fixes
- Enable TMZ on Renoir
- Buffer object code cleanup
- Display overlay fixes
- Initial support for multiple eDP panels
- Initial SR-IOV support for Aldebaran
- DP link training refactor
- Misc code cleanups and bug fixes
- SMU regression fixes for variable sized arrays
- MAINTAINERS fixes for amdgpu
amdkfd:
- Initial SR-IOV support for Aldebaran
- Topology fixes
- Initial HMM SVM support
- Misc code cleanups and bug fixes
radeon:
- Misc code cleanups and bug fixes
- SMU regression fixes for variable sized arrays
- Flickering fix for Oland with multiple 4K displays
UAPI:
- amdgpu: Drop AMDGPU_GEM_CREATE_SHADOW flag.
This was always a kernel internal flag and userspace use of it has always been blocked.
It's no longer needed so remove it.
- amdkgd: HMM SVM support
Overview: https://patchwork.freedesktop.org/series/85562/
Porposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/tree/fxkamd/hmm-wip
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520031258.231896-1-alexander.deucher@amd.com
Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported issues,
and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYKZCBg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhRQCdGk6ri4oluyn/Z/2KAjvXDOmTmvgAn12VP42d
S1Zmh4qRH2OWaLOBg7c2
=qtxj
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported
issues, and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
misc: eeprom: at24: check suspend status before disable regulator
uio_hv_generic: Fix another memory leak in error handling paths
uio_hv_generic: Fix a memory leak in error handling paths
uio/uio_pci_generic: fix return value changed in refactoring
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
dyndbg: drop uninformative vpr_info
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
cdrom: gdrom: initialize global variable at init time
brcmfmac: properly check for bus register errors
Revert "brcmfmac: add a check for the status of usb_register"
video: imsttfb: check for ioremap() failures
Revert "video: imsttfb: fix potential NULL pointer dereferences"
net: liquidio: Add missing null pointer checks
Revert "net: liquidio: fix a NULL pointer dereference"
media: gspca: properly check for errors in po1030_probe()
Revert "media: gspca: Check the return value of write_bridge for timeout"
media: gspca: mt9m111: Check write_bridge for timeout
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
media: dvb: Add check on sp8870_readreg return
...
The new bit in the comp_mask is needed to mark that kernel supports
SQD2RTS transition for the modify QP command.
Link: https://lore.kernel.org/r/7ce705fedac1b2b8e3a2f4013e04244dc5946344.1620641808.git.leonro@nvidia.com
Reviewed-by: Evgenii Kochetov <evgeniik@nvidia.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-05-19
The following pull-request contains BPF updates for your *net-next* tree.
We've added 43 non-merge commits during the last 11 day(s) which contain
a total of 74 files changed, 3717 insertions(+), 578 deletions(-).
The main changes are:
1) syscall program type, fd array, and light skeleton, from Alexei.
2) Stop emitting static variables in skeleton, from Andrii.
3) Low level tc-bpf api, from Kumar.
4) Reduce verifier kmalloc/kfree churn, from Lorenz.
====================
Add BPF_PROG_RUN command as an alias to BPF_RPOG_TEST_RUN to better
indicate the full range of use cases done by the command.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210519014032.20908-1-alexei.starovoitov@gmail.com
Define AT_MINSIGSTKSZ in the generic uapi header. It is already used
as generic ABI in glibc's generic elf.h, and this define will prevent
future namespace conflicts. In particular, x86 is also using this
generic definition.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-2-chang.seok.bae@intel.com
UAPI Changes:
* drm: Disable connector force-probing for non-master clients
* drm: Enforce consistency between IN_FORMATS property and cap + related
driver cleanups
* drm/amdgpu: Track devices, process info and fence info via
/proc/<pid>/fdinfo
* drm/ioctl: Mark AGP-related ioctls as legacy
* drm/ttm: Provide tt_shrink file to trigger shrinker via debugfs;
Cross-subsystem Changes:
* fbdev/efifb: Special handling of non-PCI devices
* fbdev/imxfb: Fix error message
Core Changes:
* drm: Add connector helper to attach HDR-metadata property and convert
drivers
* drm: Add connector helper to compare HDR-metadata and convert drivers
* drm: Add conenctor helper to attach colorspace property
* drm: Signal colorimetry in HDMI infoframe
* drm: Support pitch for destination buffers; Add blitter function
with generic format conversion
* drm: Remove struct drm_device.pdev and update legacy drivers
* drm: Remove obsolete DRM_KMS_FB_HELPER config option in core and drivers
* drm: Remove obsolete drm_pci_alloc/drm_pci_free
* drm/aperture: Add helpers for aperture ownership and convert drivers, replaces rsp fbdev helpers
* drm/agp: Mark DRM AGP code as legacy and convert legacy drivers
* drm/atomic-helpers: Cleanups
* drm/dp: Handle downstream port counts of 0 correctly; AUX channel fixes; Use
drm_err_*/drm_dbg_*(); Cleanups
* drm/dp_dual_mode: Use drm_err_*/drm_dbg_*()
* drm/dp_mst: Use drm_err_*/drm_dbg_*(); Use Extended Base Receiver Capability DPCD space
* drm/gem-ttm-helper: Provide helper for dumb_map_offset and convert drivers
* drm/panel: Use sysfs_emit; panel-simple: Use runtime PM, Power up panel
when reading EDID, Cache EDID, Cleanups;
Lms397KF04: DT bindings
* drm/pci: Mark AGP helpers as legacy
* drm/print: Handle NULL for DRM devices gracefully
* drm/scheduler: Change scheduled fence track
* drm/ttm: Don't count SG BOs against pages_limit; Warn about freeing pinned
BOs; Fix error handling if no BO can be swapped out; Move special
handling of non-GEM drivers into vmwgfx; Move page_alignment into
the BO; Set drm-misc as TTM tree in MAINTAINERS; Cleanup
ttm_agp_backend; Add ttm_sys_manager for system domain; Cleanups
Driver Changes:
* drm: Don't set allow_fb_modifiers explictly in drivers
* drm/amdgpu: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages
* drm/ast: Use managed pcim_iomap(); Fix EDID retrieval with DP501
* drm/bridge: MHDP8546: HDCP support + DT bindings, Register DP AUX channel
with userspace; Sil8620: Fix module dependencies; dw-hdmi: Add option to
not load CEC driver; Fix stopping in drm_bridge_chain_pre_enable();
Ti-sn65dsi86: Fix refclk handling, Break GPIO and MIPI-to-eDP into
subdrivers, Use pm_runtime autosuspend, cleanups; It66121: Add
driver + DT bindings; Adv7511: Support I2S IEC958 encoding; Anx7625: fix
power-on delay; Nwi-dsi: Modesetting fixes; Cleanups
* drm/bochs: Support screen blanking
* drm/gma500: Cleanups
* drm/gud: Cleanups
* drm/i915: Use correct max source link rate for MST
* drm/kmb: Cleanups
* drm/meson: Disable dw-hdmi CEC driver
* drm/nouveau: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages; Register AUX adapters after their connectors
* drm/qxl: Fix shadow BO unpin
* drm/radeon: Duplicate some DRM AGP code to uncouple from legacy drivers
* drm/simpledrm: Add a generic DRM driver for simple-framebuffer devices
* drm/tiny: Fix log spam if probe function gets deferred
* drm/vc4: Add support for HDR-metadata property; Cleanups
* drm/virtio: Create dumb BOs as guest blobs;
* drm/vkms: Use managed drmm_universal_plane_alloc(); Add XRGB plane
composition; Add overlay support
* drm/vmwgfx: Enable console with DRM_FBDEV_EMULATION; Fix CPU updates
of coherent multisample surfaces; Remove reservation semaphore; Add
initial SVGA3 support; Support amd64; Use 1-based IDR; Use min_t();
Cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmCb4QsACgkQaA3BHVML
eiPwUgf/eTodvGQyB0cjv1vyHlttLo2t9k4QBO0pzVH0DJokl/pMpY0CuS8A/afW
RmKLYod3TQb2QeEqWjocPxcYrh5WCbjdDZlmSb+pF+qau4b4s09SzIogK3lO1Nve
9N1WVa7C3JC3k3XYexpeZ78RtoNN0UboMKDfbZODnn1PtjVtOp7Nbb92trRuB7y+
B72A8RQMYB5IywVln9+lzLYcrmpHZbk/sLmC5pIGBPcTyhn0TFinUYlg9iq1PvNM
fIqvPvXwxDVRO6hgnxZWKrdvQKCOcl5KFnk4E6H+ZkgWJ+yuAWI9r2N9TeelcW+M
jlCHreWEHhuTPkr/ypnVmO8kuEgSFA==
=G9ip
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-05-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.14:
UAPI Changes:
* drm: Disable connector force-probing for non-master clients
* drm: Enforce consistency between IN_FORMATS property and cap + related
driver cleanups
* drm/amdgpu: Track devices, process info and fence info via
/proc/<pid>/fdinfo
* drm/ioctl: Mark AGP-related ioctls as legacy
* drm/ttm: Provide tt_shrink file to trigger shrinker via debugfs;
Cross-subsystem Changes:
* fbdev/efifb: Special handling of non-PCI devices
* fbdev/imxfb: Fix error message
Core Changes:
* drm: Add connector helper to attach HDR-metadata property and convert
drivers
* drm: Add connector helper to compare HDR-metadata and convert drivers
* drm: Add conenctor helper to attach colorspace property
* drm: Signal colorimetry in HDMI infoframe
* drm: Support pitch for destination buffers; Add blitter function
with generic format conversion
* drm: Remove struct drm_device.pdev and update legacy drivers
* drm: Remove obsolete DRM_KMS_FB_HELPER config option in core and drivers
* drm: Remove obsolete drm_pci_alloc/drm_pci_free
* drm/aperture: Add helpers for aperture ownership and convert drivers, replaces rsp fbdev helpers
* drm/agp: Mark DRM AGP code as legacy and convert legacy drivers
* drm/atomic-helpers: Cleanups
* drm/dp: Handle downstream port counts of 0 correctly; AUX channel fixes; Use
drm_err_*/drm_dbg_*(); Cleanups
* drm/dp_dual_mode: Use drm_err_*/drm_dbg_*()
* drm/dp_mst: Use drm_err_*/drm_dbg_*(); Use Extended Base Receiver Capability DPCD space
* drm/gem-ttm-helper: Provide helper for dumb_map_offset and convert drivers
* drm/panel: Use sysfs_emit; panel-simple: Use runtime PM, Power up panel
when reading EDID, Cache EDID, Cleanups;
Lms397KF04: DT bindings
* drm/pci: Mark AGP helpers as legacy
* drm/print: Handle NULL for DRM devices gracefully
* drm/scheduler: Change scheduled fence track
* drm/ttm: Don't count SG BOs against pages_limit; Warn about freeing pinned
BOs; Fix error handling if no BO can be swapped out; Move special
handling of non-GEM drivers into vmwgfx; Move page_alignment into
the BO; Set drm-misc as TTM tree in MAINTAINERS; Cleanup
ttm_agp_backend; Add ttm_sys_manager for system domain; Cleanups
Driver Changes:
* drm: Don't set allow_fb_modifiers explictly in drivers
* drm/amdgpu: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages
* drm/ast: Use managed pcim_iomap(); Fix EDID retrieval with DP501
* drm/bridge: MHDP8546: HDCP support + DT bindings, Register DP AUX channel
with userspace; Sil8620: Fix module dependencies; dw-hdmi: Add option to
not load CEC driver; Fix stopping in drm_bridge_chain_pre_enable();
Ti-sn65dsi86: Fix refclk handling, Break GPIO and MIPI-to-eDP into
subdrivers, Use pm_runtime autosuspend, cleanups; It66121: Add
driver + DT bindings; Adv7511: Support I2S IEC958 encoding; Anx7625: fix
power-on delay; Nwi-dsi: Modesetting fixes; Cleanups
* drm/bochs: Support screen blanking
* drm/gma500: Cleanups
* drm/gud: Cleanups
* drm/i915: Use correct max source link rate for MST
* drm/kmb: Cleanups
* drm/meson: Disable dw-hdmi CEC driver
* drm/nouveau: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages; Register AUX adapters after their connectors
* drm/qxl: Fix shadow BO unpin
* drm/radeon: Duplicate some DRM AGP code to uncouple from legacy drivers
* drm/simpledrm: Add a generic DRM driver for simple-framebuffer devices
* drm/tiny: Fix log spam if probe function gets deferred
* drm/vc4: Add support for HDR-metadata property; Cleanups
* drm/virtio: Create dumb BOs as guest blobs;
* drm/vkms: Use managed drmm_universal_plane_alloc(); Add XRGB plane
composition; Add overlay support
* drm/vmwgfx: Enable console with DRM_FBDEV_EMULATION; Fix CPU updates
of coherent multisample surfaces; Remove reservation semaphore; Add
initial SVGA3 support; Support amd64; Use 1-based IDR; Use min_t();
Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YJvkD523evviED01@linux-uq9g.fritz.box
Add bpf_sys_close() helper to be used by the syscall/loader program to close
intermediate FDs and other cleanup.
Note this helper must never be allowed inside fdget/fdput bracketing.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-11-alexei.starovoitov@gmail.com
Add new helper:
long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags)
Description
Find BTF type with given name and kind in vmlinux BTF or in module's BTFs.
Return
Returns btf_id and btf_obj_fd in lower and upper 32 bits.
It will be used by loader program to find btf_id to attach the program to
and to find btf_ids of ksyms.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-10-alexei.starovoitov@gmail.com
Typical program loading sequence involves creating bpf maps and applying
map FDs into bpf instructions in various places in the bpf program.
This job is done by libbpf that is using compiler generated ELF relocations
to patch certain instruction after maps are created and BTFs are loaded.
The goal of fd_idx is to allow bpf instructions to stay immutable
after compilation. At load time the libbpf would still create maps as usual,
but it wouldn't need to patch instructions. It would store map_fds into
__u32 fd_array[] and would pass that pointer to sys_bpf(BPF_PROG_LOAD).
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-9-alexei.starovoitov@gmail.com
Add placeholders for bpf_sys_bpf() helper and new program type.
Make sure to check that expected_attach_type is zero for future extensibility.
Allow tracing helper functions to be used in this program type, since they will
only execute from user context via bpf_prog_test_run.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-2-alexei.starovoitov@gmail.com
With the addition of ssi_perf_data and ssi_perf_type struct signalfd_siginfo
is dangerously close to running out of space. All that remains is just
enough space for two additional 64bit fields. A practice of adding all
possible siginfo_t fields into struct singalfd_siginfo can not be supported
as adding the missing fields ssi_lower, ssi_upper, and ssi_pkey would
require two 64bit fields and one 32bit fields. In practice the fields
ssi_perf_data and ssi_perf_type can never be used by signalfd as the signal
that generates them always delivers them synchronously to the thread that
triggers them.
Therefore until someone actually needs the fields ssi_perf_data and
ssi_perf_type in signalfd_siginfo remove them. This leaves a bit more room
for future expansion.
v1: https://lkml.kernel.org/r/20210503203814.25487-12-ebiederm@xmission.com
v2: https://lkml.kernel.org/r/20210505141101.11519-12-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20210517195748.8880-5-ebiederm@xmission.com
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
It turns out that linux uses si_trapno very sparingly, and as such it
can be considered extra information for a very narrow selection of
signals, rather than information that is present with every fault
reported in siginfo.
As such move si_trapno inside the union inside of _si_fault. This
results in no change in placement, and makes it eaiser
to extend _si_fault in the future as this reduces the number of
special cases. In particular with si_trapno included in the union it
is no longer a concern that the union must be pointer aligned on most
architectures because the union follows immediately after si_addr
which is a pointer.
This change results in a difference in siginfo field placement on
sparc and alpha for the fields si_addr_lsb, si_lower, si_upper,
si_pkey, and si_perf. These architectures do not implement the
signals that would use si_addr_lsb, si_lower, si_upper, si_pkey, and
si_perf. Further these architecture have not yet implemented the
userspace that would use si_perf.
The point of this change is in fact to correct these placement issues
before sparc or alpha grow userspace that cares. This change was
discussed[1] and the agreement is that this change is currently safe.
[1]: https://lkml.kernel.org/r/CAK8P3a0+uKYwL1NhY6Hvtieghba2hKYGD6hcKx5n8=4Gtt+pHA@mail.gmail.com
Acked-by: Marco Elver <elver@google.com>
v1: https://lkml.kernel.org/r/m1tunns7yf.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/20210505141101.11519-5-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20210517195748.8880-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This commit adds a new framing mode that frames all MIDI data into
32-byte frames with a timestamp.
The main benefit is that we can get accurate timestamps even if
userspace wakeup and processing is not immediate.
Testing on a Celeron N3150 with this mode has a max jitter of 2.8 ms,
compared to the in-kernel seq implementation which has a max jitter
of 5 ms during idle and much worse when running scheduler stress tests
in parallel.
Signed-off-by: David Henningsson <coding@diwic.se>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210515071533.55332-1-coding@diwic.se
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=JpHn
-----END PGP SIGNATURE-----
Merge tag 'block-5.13-2021-05-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for shared tag set exit (Bart)
- Correct ioctl range for zoned ioctls (Damien)
- Removed dead/unused function (Lin)
- Fix perf regression for shared tags (Ming)
- Fix out-of-bounds issue with kyber and preemption (Omar)
- BFQ merge fix (Paolo)
- Two error handling fixes for nbd (Sun)
- Fix weight update in blk-iocost (Tejun)
- NVMe pull request (Christoph):
- correct the check for using the inline bio in nvmet (Chaitanya
Kulkarni)
- demote unsupported command warnings (Chaitanya Kulkarni)
- fix corruption due to double initializing ANA state (me, Hou Pu)
- reset ns->file when open fails (Daniel Wagner)
- fix a NULL deref when SEND is completed with error in nvmet-rdma
(Michal Kalderon)
- Fix kernel-doc warning (Bart)
* tag 'block-5.13-2021-05-14' of git://git.kernel.dk/linux-block:
block/partitions/efi.c: Fix the efi_partition() kernel-doc header
blk-mq: Swap two calls in blk_mq_exit_queue()
blk-mq: plug request for shared sbitmap
nvmet: use new ana_log_size instead the old one
nvmet: seset ns->file when open fails
nbd: share nbd_put and return by goto put_nbd
nbd: Fix NULL pointer in flush_workqueue
blkdev.h: remove unused codes blk_account_rq
block, bfq: avoid circular stable merges
blk-iocost: fix weight updates of inner active iocgs
nvmet: demote fabrics cmd parse err msg to debug
nvmet: use helper to remove the duplicate code
nvmet: demote discovery cmd parse err msg to debug
nvmet-rdma: Fix NULL deref when SEND is completed with error
nvmet: fix inline bio check for passthru
nvmet: fix inline bio check for bdev-ns
nvme-multipath: fix double initialization of ANA state
kyber: fix out of bounds access when preempted
block: uapi: fix comment about block device ioctl
Now that we have split the multicast router state into two, one for IPv4
and one for IPv6, also add individual timers to the mdb netlink router
port dump. Leaving the old timer attribute for backwards compatibility.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Noone stepped up in the past two years since it was marked as BROKEN by
commit c7084edc3f (tty: mark Siemens R3964 line discipline as BROKEN).
Remove the line discipline for good.
Three remarks:
* we remove also the uapi header (as noone is able to use that interface
anyway)
* we do *not* remove the N_R3964 constant definition from tty.h, so it
remains reserved.
* in_interrupt() check is now removed from vt's con_put_char. Noone else
calls tty_operations::put_char from interrupt context.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210505091928.22010-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch provides support for setting and copying core scheduling
'task cookies' between threads (PID), processes (TGID), and process
groups (PGID).
The value of core scheduling isn't that tasks don't share a core,
'nosmt' can do that. The value lies in exploiting all the sharing
opportunities that exist to recover possible lost performance and that
requires a degree of flexibility in the API.
From a security perspective (and there are others), the thread,
process and process group distinction is an existent hierarchal
categorization of tasks that reflects many of the security concerns
about 'data sharing'. For example, protecting against cache-snooping
by a thread that can just read the memory directly isn't all that
useful.
With this in mind, subcommands to CREATE/SHARE (TO/FROM) provide a
mechanism to create and share cookies. CREATE/SHARE_TO specify a
target pid with enum pidtype used to specify the scope of the targeted
tasks. For example, PIDTYPE_TGID will share the cookie with the
process and all of it's threads as typically desired in a security
scenario.
API:
prctl(PR_SCHED_CORE, PR_SCHED_CORE_GET, tgtpid, pidtype, &cookie)
prctl(PR_SCHED_CORE, PR_SCHED_CORE_CREATE, tgtpid, pidtype, NULL)
prctl(PR_SCHED_CORE, PR_SCHED_CORE_SHARE_TO, tgtpid, pidtype, NULL)
prctl(PR_SCHED_CORE, PR_SCHED_CORE_SHARE_FROM, srcpid, pidtype, NULL)
where 'tgtpid/srcpid == 0' implies the current process and pidtype is
kernel enum pid_type {PIDTYPE_PID, PIDTYPE_TGID, PIDTYPE_PGID, ...}.
For return values, EINVAL, ENOMEM are what they say. ESRCH means the
tgtpid/srcpid was not found. EPERM indicates lack of PTRACE permission
access to tgtpid/srcpid. ENODEV indicates your machines lacks SMT.
[peterz: complete rewrite]
Signed-off-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123309.039845339@infradead.org
Fix the comment mentioning ioctl command range used for zoned block
devices to reflect the range of commands actually implemented.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210509234806.3000-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Expose PLL information per ASIC. This also fixes some casting warnings.
- Skip reading further firmware errors in case PCI link is down.
- Security firmware error should be handled as error and not warning.
- Allow user to ignore firmware errors.
- Fix bug in timeout calculation when waiting for interrupt of CS.
- Fix bug of potential use-after-free.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE7TEboABC71LctBLFZR1NuKta54AFAmCWTaoTHG9nYWJiYXlA
a2VybmVsLm9yZwAKCRBlHU24q1rngMgUB/4gep0fP5vP71R4vsjdlKFkuf/1+b9/
oUJbI5ujWLuJGJpxpv1pZfy/miT4hOIYgxR5jRXa7NJMabW4+PBO7lufif9nsFb9
D4BG/2hAWJLoSdmSlNaRhswScDVjfQBpQPtKBUZPs7YOebNjVCdXBoFwKSFHeWV/
L3zs2/zelCqz8l+F3UFi7Pix+SZCOruah9iAPQaluhQvYEiz6BH5mnz+rm2v7X/X
0/ySpKmtpBcRiL736s9tAZpGjgkfT6Ujdv4qWywX6YPVndoaWLbZlkwm/FGH9SwL
KLE9bx0xi9u1b8bVN4OltV37g4cH7dqfktXYS0AP4S2lnjTkMCoUmzu0
=7Lkr
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-fixes-2021-05-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-linus
Oded writes:
This tag contains the following fixes for 5.13-rc2:
- Expose PLL information per ASIC. This also fixes some casting warnings.
- Skip reading further firmware errors in case PCI link is down.
- Security firmware error should be handled as error and not warning.
- Allow user to ignore firmware errors.
- Fix bug in timeout calculation when waiting for interrupt of CS.
- Fix bug of potential use-after-free.
* tag 'misc-habanalabs-fixes-2021-05-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux:
habanalabs/gaudi: Fix a potential use after free in gaudi_memset_device_memory
habanalabs: wait for interrupt wrong timeout calculation
habanalabs: ignore f/w status error
habanalabs: change error level of security not ready
habanalabs: skip reading f/w errors on bad status
habanalabs: expose ASIC specific PLL index
and netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to
avoid false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JmWS
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
Currently the user cannot interpret the PLL information based on index
as its exposed as an integer.
This commit exposes ASIC specific PLL indexes and maps it to a generic
FW compatible index.
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."
I recently receive a patch to explicitly add a new one.
Let's do treewide cleanups, otherwise some people follow the existing code
and attempt to upstream their favoriate editor setups.
It is even nicer if scripts/checkpatch.pl can check it.
If we like to impose coding style in an editor-independent manner, I think
editorconfig (patch [1]) is a saner solution.
[1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/
Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Support for the memtest= kernel command-line argument.
* Support for building the kernel with FORTIFY_SOURCE.
* Support for generic clockevent broadcasts.
* Support for the buildtar build target.
* Some build system cleanups to pass more LLVM-friendly arguments.
* Support for kprobes.
* A rearranged kernel memory map, the first part of supporting sv48
systems.
* Improvements to kexec, along with support for kdump and crash kernels.
* An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
* Support for XIP.
* A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
Along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
-----BEGIN PGP SIGNATURE-----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=PsA8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the memtest= kernel command-line argument.
- Support for building the kernel with FORTIFY_SOURCE.
- Support for generic clockevent broadcasts.
- Support for the buildtar build target.
- Some build system cleanups to pass more LLVM-friendly arguments.
- Support for kprobes.
- A rearranged kernel memory map, the first part of supporting sv48
systems.
- Improvements to kexec, along with support for kdump and crash
kernels.
- An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
- Support for XIP.
- A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
... along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
RISC-V: Always define XIP_FIXUP
riscv: Remove 32b kernel mapping from page table dump
riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
RISC-V: Enable Microchip PolarFire ICICLE SoC
RISC-V: Initial DTS for Microchip ICICLE board
dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
RISC-V: Add Microchip PolarFire SoC kconfig option
RISC-V: enable XIP
RISC-V: Add crash kernel support
RISC-V: Add kdump support
RISC-V: Improve init_resources()
RISC-V: Add kexec support
RISC-V: Add EM_RISCV to kexec UAPI header
riscv: vdso: fix and clean-up Makefile
riscv/mm: Use BUG_ON instead of if condition followed by BUG.
riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
riscv: module: Create module allocations without exec permissions
riscv: bpf: Avoid breaking W^X
...
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
- Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury)
- Add the missing fifth node on the rcar_gen3 sensor (Niklas
Söderlund)
- Remove duplicate include in ti-bandgap (Zhang Yunkai)
- Assign error code in the error path in the function
thermal_of_populate_bind_params() (Jia-Ju Bai)
- Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian
King)
- Use the device name instead of auto-numbering for a better
identification of the cooling device (Daniel Lezcano)
- Improve a bit the division accuracy in the power allocator governor
(Jeson Gao)
- Enable the missing third sensor on msm8976 (Konrad Dybcio)
- Add QCom tsens driver co-maintainer (Thara Gopinath)
- Fix memory leak and use after free errors in the core code (Daniel
Lezcano)
- Add the MDM9607 compatible bindings (Konrad Dybcio)
- Fix trivial spello in the copyright name for Hisilicon (Hao Fang)
- Fix negative index array access when converting the frequency to
power in the energy model (Brian-sy Yang)
- Add support for Gen2 new PMIC support for Qcom SPMI (David Collins)
- Update maintainer file for CPU cooling device section (Lukasz Luba)
- Fix missing put_device on error in the Qcom tsens driver (Guangqing
Zhu)
- Add compatible DT binding for sm8350 (Robert Foss)
- Add support for the MDM9607's tsens driver (Konrad Dybcio)
- Remove duplicate error messages in thermal_mmio and the bcm2835
driver (Ruiqi Gong)
- Add the Thermal Temperature Cooling driver (Zhang Rui)
- Remove duplicate error messages in the Hisilicon sensor driver (Ye
Bin)
- Use the devm_platform_ioremap_resource_byname() function instead of
a couple of corresponding calls (dingsenjie)
- Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei)
- Add missing property in the DT thermal sensor binding (Rafał
Miłecki)
- Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe)
- Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki)
- Replace the thermal_notify_framework() call by a call to the
thermal_zone_device_update() function. Remove the function as well
as the corresponding documentation (Thara Gopinath)
- Add support for the ipq8064-tsens sensor along with a set of
cleanups and code preparation (Ansuel Smith)
- Add a lockless __thermal_cdev_update() function to improve the
locking scheme in the core code and governors (Lukasz Luba)
- Fix multiple cooling device notification changes (Lukasz Luba)
- Remove unneeded variable initialization (Colin Ian King)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmCRqDIACgkQqDIjiipP
6E8O2Qf5AQvSVoN9WYRBLo1+a4mkGsJ/wHQMEsOA4FVHft5/QVkRtpMNbSiyq00O
YTpNuoBqiYm/tSTyzK/5Oh+0ucgm/ef4c4dTyPjZYw2GB+3rYNRAXdX/tB6Ggjl/
oUArUCoSQZjOU6Y573B05rcHp1PVM/XL9LgD1uX76tXA1MaGvsyC0cyPRAdOANke
W83BWI0XMhv8B1bZwHVB2Oft5x6HhqWBl3HKbNOmPEMtwkqqBCFAqB0wNEH88ZTf
2hyBjBoZQHdMkJsC0piMvIyAjHZiIjQB47VWz31EvKB3/E28xCqRqPViPq9QbrA5
got0+oDbxI96T024ndXRomc0SSxZnw==
=5THg
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Remove duplicate error message for the amlogic driver (Tang Bin)
- Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury)
- Add the missing fifth node on the rcar_gen3 sensor (Niklas Söderlund)
- Remove duplicate include in ti-bandgap (Zhang Yunkai)
- Assign error code in the error path in the function
thermal_of_populate_bind_params() (Jia-Ju Bai)
- Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian
King)
- Use the device name instead of auto-numbering for a better
identification of the cooling device (Daniel Lezcano)
- Improve a bit the division accuracy in the power allocator governor
(Jeson Gao)
- Enable the missing third sensor on msm8976 (Konrad Dybcio)
- Add QCom tsens driver co-maintainer (Thara Gopinath)
- Fix memory leak and use after free errors in the core code (Daniel
Lezcano)
- Add the MDM9607 compatible bindings (Konrad Dybcio)
- Fix trivial spello in the copyright name for Hisilicon (Hao Fang)
- Fix negative index array access when converting the frequency to
power in the energy model (Brian-sy Yang)
- Add support for Gen2 new PMIC support for Qcom SPMI (David Collins)
- Update maintainer file for CPU cooling device section (Lukasz Luba)
- Fix missing put_device on error in the Qcom tsens driver (Guangqing
Zhu)
- Add compatible DT binding for sm8350 (Robert Foss)
- Add support for the MDM9607's tsens driver (Konrad Dybcio)
- Remove duplicate error messages in thermal_mmio and the bcm2835
driver (Ruiqi Gong)
- Add the Thermal Temperature Cooling driver (Zhang Rui)
- Remove duplicate error messages in the Hisilicon sensor driver (Ye
Bin)
- Use the devm_platform_ioremap_resource_byname() function instead of a
couple of corresponding calls (dingsenjie)
- Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei)
- Add missing property in the DT thermal sensor binding (Rafał Miłecki)
- Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe)
- Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki)
- Replace the thermal_notify_framework() call by a call to the
thermal_zone_device_update() function. Remove the function as well as
the corresponding documentation (Thara Gopinath)
- Add support for the ipq8064-tsens sensor along with a set of cleanups
and code preparation (Ansuel Smith)
- Add a lockless __thermal_cdev_update() function to improve the
locking scheme in the core code and governors (Lukasz Luba)
- Fix multiple cooling device notification changes (Lukasz Luba)
- Remove unneeded variable initialization (Colin Ian King)
* tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (55 commits)
thermal/drivers/mtk_thermal: Remove redundant initializations of several variables
thermal/core/power allocator: Use the lockless __thermal_cdev_update() function
thermal/core/fair share: Use the lockless __thermal_cdev_update() function
thermal/core/fair share: Lock the thermal zone while looping over instances
thermal/core/power_allocator: Update once cooling devices when temp is low
thermal/core/power_allocator: Maintain the device statistics from going stale
thermal/core: Create a helper __thermal_cdev_update() without a lock
dt-bindings: thermal: tsens: Document ipq8064 bindings
thermal/drivers/tsens: Add support for ipq8064-tsens
thermal/drivers/tsens: Drop unused define for msm8960
thermal/drivers/tsens: Replace custom 8960 apis with generic apis
thermal/drivers/tsens: Fix bug in sensor enable for msm8960
thermal/drivers/tsens: Use init_common for msm8960
thermal/drivers/tsens: Add VER_0 tsens version
thermal/drivers/tsens: Convert msm8960 to reg_field
thermal/drivers/tsens: Don't hardcode sensor slope
Documentation: driver-api: thermal: Remove thermal_notify_framework from documentation
thermal/core: Remove thermal_notify_framework
iwlwifi: mvm: tt: Replace thermal_notify_framework
dt-bindings: thermal: brcm,ns-thermal: Convert to the json-schema
...
It is currently not obvious that the RECLAIM_* bits are part of the uapi
since they are defined in vmscan.c. Move them to a uapi header to make it
obvious.
This should have no functional impact.
Link: https://lkml.kernel.org/r/20210219172557.08074910@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert the uAPI changes from the below commit with notice that these
regions and capabilities are no longer provided.
Fixes: b392a19891 ("vfio/pci: remove vfio_pci_nvlink2")
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <162014341432.3807030.11054087109120670135.stgit@omen>
HUTRR101 added a new usage code for a key that is supposed to invoke and
dismiss an emoji picker widget to assist users to locate and enter emojis.
This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In addition to some bug fixes and cleanups this adds support for
exposing the virtio based transport to user space using the rpmsg_char
driver.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmCRYXsbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FXiEP/RC4cXMaHCtIKvXDbwwB
yP0Gl+gnP1LEEK8IkD5PJVzS5oi/s6KGct4x3EadvQEq42uJCxskbYZMN/R+wMGd
XTz2N0Bt7wErLQznD0dqDCdpihrkoao1zSu4rSDlnBzRZEGuWQBgTTeiEPh1sVXF
40r2zuUrvkERKG27DsflbE15Iqaz3ZoEc7X/0Mv9YQtBV+0HTtd6n0X8Vus6JcGR
un7t9Op9SlvYcEtsyqCewNrgpJhb9orpWDnIV+V7VXrvEBr0UOat881t2QZN3geM
pdIo+bU66VnqWy8Rd2g5zJl9jHr5C8YbpTgUy0+WFAjNu6CV0sW9jlMFKBMxMrDi
XpKqj/4TUqTvdSe30Y70/HdCQelbFVxNEFljX86hqD2Isg6P5DAe2GKDApt1SsMo
apy6Snp0F4JTL8rb0g5e/WUnWh11bKyhFSYFKnzPZKpQWfE0ppfOLKfDMlvksxyI
IZIqVz87VVu2itVPuYAvSBTtL+5KQP1U39LIOrX4y9Y3eordlbjIMU1wiem7uU3c
B3VYgaJY0iElElNqyrGZWvJxHuJf/IgOqg4V2P8x5fcw+vmSuz2prS6a2kU8doKU
D3cZrIpSGZLBfJw47bOBsdEnVNh16gC+TbGuh/hzEA+wJ+nu/haLl/KQf6yUQd24
ifIRQ0csTeptssTb/5rjLtNf
=pv2g
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"In addition to some bug fixes and cleanups this adds support for
exposing the virtio based transport to user space using the rpmsg_char
driver"
* tag 'rpmsg-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()
rpmsg: char: Return an error if device already open
rpmsg: virtio: Register the rpmsg_char device
rpmsg: char: Use rpmsg_sendto to specify the message destination address
rpmsg: Add short description of the IOCTL defined in UAPI.
rpmsg: Move RPMSG_ADDR_ANY in user API
rpmsg: char: Rename rpmsg_char_init to rpmsg_chrdev_init
Add new extension to support setting an immutable-priority-list of
potential placements, at creation time.
If we use the normal gem_create or gem_create_ext without the
extensions/placements then we still get the old behaviour with only
placing the object in system memory.
v2(Daniel & Jason):
- Add a bunch of kernel-doc
- Simplify design for placements extension
Testcase: igt/gem_create/create-ext-placement-sanity-check
Testcase: igt/gem_create/create-ext-placement-each
Testcase: igt/gem_create/create-ext-placement-all
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-6-matthew.auld@intel.com
Same old gem_create but with now with extensions support. This is needed
to support various upcoming usecases.
v2:(Chris)
- Use separate ioctl number for gem_create_ext, instead of hijacking
the existing gem_create ioctl, otherwise we run into the issue
with being unable to detect if the kernel supports the new extension
behaviour.
- We now have gem_create_ext.flags, which should be zeroed.
- I915_GEM_CREATE_EXT_SETPARAM value is now zero, since this is the
index into our array of extensions.
- Setup a "vanilla" object which we can directly apply our extensions
to.
v3:(Daniel & Jason)
- drop I915_GEM_CREATE_EXT_SETPARAM. Instead just have each extension
do one thing only, instead of generic setparam which can cover
various use cases.
- add some kernel-doc.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-5-matthew.auld@intel.com
Returns the available memory region areas supported by the HW.
v2(Daniel & Jason):
- Add some kernel-doc, including example usage.
- Drop all the extra rsvd
v3(Jason & Tvrtko)
- add back rsvd
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-3-matthew.auld@intel.com
This extension breaks when trying to delete rules, add a new revision to
fix this.
Fixes: 5e6874cdb8 ("[SECMARK]: Add xtables SECMARK target")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Force-probing a connector can be slow and cause flickering. As this
affects the global KMS state, let's make it so only the DRM master
can force-probe a connector.
Non-master DRM clients won't be able to force-probe a connector
anymore. Instead, KMS will perform a regular read-only connector
query.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210402112212.5625-1-contact@emersion.fr
-----BEGIN PGP SIGNATURE-----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=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
- Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
allow filtering based on name or UUID prefix.
- Various small fixes for typos, warnings, unused function, or
needlessly exported interfaces.
- Remove needless request_queue NULL pointer checks in DM thin and
cache targets.
- Remove unnecessary loop in DM core's __split_and_process_bio().
- Remove DM core's dm_vcalloc() and just use kvcalloc or
kvmalloc_array instead (depending whether zeroing is useful).
- Fix request-based DM's double free of blk_mq_tag_set in device
remove after table load fails.
- Improve DM persistent data performance on non-x86 by fixing packed
structs to have a stated alignment. Also remove needless extra work
from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
that caused duplicate checksum calculation.
- Fix missing goto in DM integrity's bitmap_flush_interval error
handling.
- Add "reset_recalculate" feature flag to DM integrity.
- Improve DM integrity by leveraging discard support to avoid needless
re-writing of metadata and also use discard support to improve
hash recalculation.
- Fix race with DM raid target's reshape and MD raid4/5/6 resync that
resulted in inconsistant reshape state during table reloads.
- Update DM raid target to temove unnecessary discard limits for raid0
and raid10 now that MD has optimized discard handling for both raid
levels.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmCMVxkTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWjD7B/4mucuval0w8OBl7MPE5mR/tPmU/Avr
iFmXQjofjXCXGdCk7XqOqKZGKlm/jCTQkhbZPEo5PTCZPf6iGyeoSFOC0xck9HUI
9EJNrnx6L0ch3OS5IREgc3oO7vXFnmnLvmo27t7yUaqWqdMBIZ/rEA6Ro7oq4pXc
fo/Yqka2iuS0X2RKhAbci2KAOWdeX400nqH7bHaR5VgOE3JRJtsEWRTmkngB4bzM
Bsz2zzaSnbFa/Nlg2cH69kw2NJpZsAoKmoQ0OJt7QQs+GYLvCbioQnlxLPSFhlKX
4mSPPPKy3TxaAqsHXt+gCG6Vs8VvvgK0iHIa9e0ifIy3wvLoosLpIXhc
=k1ND
-----END PGP SIGNATURE-----
Merge tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Improve scalability of DM's device hash by switching to rbtree
- Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
allow filtering based on name or UUID prefix.
- Various small fixes for typos, warnings, unused function, or
needlessly exported interfaces.
- Remove needless request_queue NULL pointer checks in DM thin and
cache targets.
- Remove unnecessary loop in DM core's __split_and_process_bio().
- Remove DM core's dm_vcalloc() and just use kvcalloc or kvmalloc_array
instead (depending whether zeroing is useful).
- Fix request-based DM's double free of blk_mq_tag_set in device remove
after table load fails.
- Improve DM persistent data performance on non-x86 by fixing packed
structs to have a stated alignment. Also remove needless extra work
from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
that caused duplicate checksum calculation.
- Fix missing goto in DM integrity's bitmap_flush_interval error
handling.
- Add "reset_recalculate" feature flag to DM integrity.
- Improve DM integrity by leveraging discard support to avoid needless
re-writing of metadata and also use discard support to improve hash
recalculation.
- Fix race with DM raid target's reshape and MD raid4/5/6 resync that
resulted in inconsistant reshape state during table reloads.
- Update DM raid target to temove unnecessary discard limits for raid0
and raid10 now that MD has optimized discard handling for both raid
levels.
* tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm raid: remove unnecessary discard limits for raid0 and raid10
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
dm integrity: use discard support when recalculating
dm integrity: increase RECALC_SECTORS to improve recalculate speed
dm integrity: don't re-write metadata if discarding same blocks
dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
dm raid: fix fall-through warning in rs_check_takeover() for Clang
dm clone metadata: remove unused function
dm integrity: fix missing goto in bitmap_flush_interval error handling
dm: replace dm_vcalloc()
dm space map common: fix division bug in sm_ll_find_free_block()
dm persistent data: packed struct should have an aligned() attribute too
dm btree spine: remove paranoid node_check call in node_prep_for_write()
dm space map disk: remove redundant calls to sm_disk_get_nr_free()
dm integrity: add the "reset_recalculate" feature flag
dm persistent data: remove unused return from exit_shadow_spine()
dm cache: remove needless request_queue NULL pointer checks
dm thin: remove needless request_queue NULL pointer check
dm: unexport dm_{get,put}_table_device
dm ebs: fix a few typos
...
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
Including:
- Big cleanup of almost unsused parts of the IOMMU API by
Christoph Hellwig. This mostly affects the Freescale PAMU
driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- SMMUv3: Drop vestigial PREFETCH_ADDR support
- SMMUv3: Elide TLB sync logic for empty gather
- SMMUv3: Fix "Service Failure Mode" handling
- SMMUv2: New Qualcomm compatible string
- Removal of the AMD IOMMU performance counter writeable check
on AMD. It caused long boot delays on some machines and is
only needed to work around an errata on some older (possibly
pre-production) chips. If someone is still hit by this
hardware issue anyway the performance counters will just
return 0.
- Support for targeted invalidations in the AMD IOMMU driver.
Before that the driver only invalidated a single 4k page or the
whole IO/TLB for an address space. This has been extended now
and is mostly useful for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the
Intel VT-d driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost
when converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and
support iommu_ops to be const again when drivers are built as
modules.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmCMEIoACgkQK/BELZcB
GuOu9xAAvg6aR0uHlxvRq6cgNnHN9Ltp5+t3qFYtRRrauY0iOPMO62k0QQli5shX
CGeczD0e59KAZqI0zNJnQn8hMY5dg7XVkFCC5BrSzuCDCtwJZ0N5Tq3pfUlaV1rw
BJf41t79Fd+jp7kn53tu+vRAfYZ3+sLOx/6U3c15pqKRZSkyFWbQllOtD3J5LnLu
1PyPlfiNpMwCajiS7aQbN+fuJ/lKIFeA2MDPOsCBzhbfxiJUqJxZOKAZO3rOjFfK
feTibqQ+3Zz6MPXt9st1cvPpy8jCosv81OY6Knqvxf/oB5q+fEdi2uNrKISonb/t
Fw331oOIwg2A+HOpwC9MN1AumOIqiHSWWENAMk9SlP+TMIWKQ8kZreyI6IEB23dV
+QvP3DVA+CfLwtNY/Zh0IqKh28D+IHlKbpWNU1m+9AUe468mV/MTjfwxr9Yfffhm
LZ6C0DgFdmtqv8jPuDGUOgo3RNeN8bLnUSEHG9gHibA+RKujl5BWDjKkwILqMQTt
Ysdsu8TiNtFIULomizqCpgqEbQfW8TLFvASXCM1VMQ/PDURxvchZPxFDJonYXy+K
z2HGaG3eUE07YrAdRKH69aMVIbmS+sjEhvmi4xZ1Lh7wWcIE2AZVvO8qNb+Ckcp3
4tLPPDksm/iQngnFf6gdgH3qv4rgbzE4+74GXqeANiQCjY9dSJI=
=qF2C
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
This is significantly bug fixes and general cleanups. The noteworthy new
features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and
qib
- Quite a few general cleanups on spelling, error handling, static checker
detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool
-----BEGIN PGP SIGNATURE-----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=vsXA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is significantly bug fixes and general cleanups. The noteworthy
new features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw
and qib
- Quite a few general cleanups on spelling, error handling, static
checker detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits)
IB/qib: Remove redundant assignment to ret
RDMA/nldev: Add copy-on-fork attribute to get sys command
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
RDMA/siw: Fix a use after free in siw_alloc_mr
IB/hfi1: Remove redundant variable rcd
RDMA/nldev: Add QP numbers to SRQ information
RDMA/nldev: Return SRQ information
RDMA/restrack: Add support to get resource tracking for SRQ
RDMA/nldev: Return context information
RDMA/core: Add CM to restrack after successful attachment to a device
RDMA/cma: Skip device which doesn't support CM
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
RDMA/mlx5: Expose private query port
RDMA/mlx4: Remove an unused variable
RDMA/mlx5: Fix type assignment for ICM DM
IB/mlx5: Set right RoCE l3 type and roce version while deleting GID
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
RDMA/cxgb4: add missing qpid increment
IB/ipoib: Remove unnecessary struct declaration
RDMA/bnxt_re: Get rid of custom module reference counting
...
No surprises in this development cycle, and most of works are about
the fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced;
used by HD-audio for now, more adaption will follow later.
The former "Mic Mute-LED Mode" mixer control has been replaced with
the corresponding sysfs now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements;
this will allow more controls in the normal usage pattern while
avoiding the possible memory exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates
Note that this PR includes a couple of changes in reset and SPI
drivers, too, and some merge conflicts might happen.
-----BEGIN PGP SIGNATURE-----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=YT3U
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"No surprises in this development cycle, and most of work is about the
fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced. It is used by HD-audio
for now, more adaption will follow later. The former "Mic Mute-LED
Mode" mixer control has been replaced with the corresponding sysfs
now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements; this will allow more controls in
the normal usage pattern while avoiding the possible memory
exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates"
* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
ALSA: hda/realtek: Re-order ALC662 quirk table entries
ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: usb-audio: Remove redundant assignment to len
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
ALSA: virtio: fix kernel-doc
ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
...
This patch provides counters for SRv6 Behaviors as defined in [1],
section 6. For each SRv6 Behavior instance, counters defined in [1] are:
- the total number of packets that have been correctly processed;
- the total amount of traffic in bytes of all packets that have been
correctly processed;
In addition, this patch introduces a new counter that counts the number of
packets that have NOT been properly processed (i.e. errors) by an SRv6
Behavior instance.
Counters are not only interesting for network monitoring purposes (i.e.
counting the number of packets processed by a given behavior) but they also
provide a simple tool for checking whether a behavior instance is working
as we expect or not.
Counters can be useful for troubleshooting misconfigured SRv6 networks.
Indeed, an SRv6 Behavior can silently drop packets for very different
reasons (i.e. wrong SID configuration, interfaces set with SID addresses,
etc) without any notification/message to the user.
Due to the nature of SRv6 networks, diagnostic tools such as ping and
traceroute may be ineffective: paths used for reaching a given router can
be totally different from the ones followed by probe packets. In addition,
paths are often asymmetrical and this makes it even more difficult to keep
up with the journey of the packets and to understand which behaviors are
actually processing our traffic.
When counters are enabled on an SRv6 Behavior instance, it is possible to
verify if packets are actually processed by such behavior and what is the
outcome of the processing. Therefore, the counters for SRv6 Behaviors offer
an non-invasive observability point which can be leveraged for both traffic
monitoring and troubleshooting purposes.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters
Troubleshooting using SRv6 Behavior counters
--------------------------------------------
Let's make a brief example to see how helpful counters can be for SRv6
networks. Let's consider a node where an SRv6 End Behavior receives an SRv6
packet whose Segment Left (SL) is equal to 0. In this case, the End
Behavior (which accepts only packets with SL >= 1) discards the packet and
increases the error counter.
This information can be leveraged by the network operator for
troubleshooting. Indeed, the error counter is telling the user that the
packet:
(i) arrived at the node;
(ii) the packet has been taken into account by the SRv6 End behavior;
(iii) but an error has occurred during the processing.
The error (iii) could be caused by different reasons, such as wrong route
settings on the node or due to an invalid SID List carried by the SRv6
packet. Anyway, the error counter is used to exclude that the packet did
not arrive at the node or it has not been processed by the behavior at
all.
Turning on/off counters for SRv6 Behaviors
------------------------------------------
Each SRv6 Behavior instance can be configured, at the time of its creation,
to make use of counters.
This is done through iproute2 which allows the user to create an SRv6
Behavior instance specifying the optional "count" attribute as shown in the
following example:
$ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0
per-behavior counters can be shown by adding "-s" to the iproute2 command
line, i.e.:
$ ip -s -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Impact of counters for SRv6 Behaviors on performance
====================================================
To determine the performance impact due to the introduction of counters in
the SRv6 Behavior subsystem, we have carried out extensive tests.
We chose to test the throughput achieved by the SRv6 End.DX2 Behavior
because, among all the other behaviors implemented so far, it reaches the
highest throughput which is around 1.5 Mpps (per core at 2.4 GHz on a
Xeon(R) CPU E5-2630 v3) on kernel 5.12-rc2 using packets of size ~ 100
bytes.
Three different tests were conducted in order to evaluate the overall
throughput of the SRv6 End.DX2 Behavior in the following scenarios:
1) vanilla kernel (without the SRv6 Behavior counters patch) and a single
instance of an SRv6 End.DX2 Behavior;
2) patched kernel with SRv6 Behavior counters and a single instance of
an SRv6 End.DX2 Behavior with counters turned off;
3) patched kernel with SRv6 Behavior counters and a single instance of
SRv6 End.DX2 Behavior with counters turned on.
All tests were performed on a testbed deployed on the CloudLab facilities
[2], a flexible infrastructure dedicated to scientific research on the
future of Cloud Computing.
Results of tests are shown in the following table:
Scenario (1): average 1504764,81 pps (~1504,76 kpps); std. dev 3956,82 pps
Scenario (2): average 1501469,78 pps (~1501,47 kpps); std. dev 2979,85 pps
Scenario (3): average 1501315,13 pps (~1501,32 kpps); std. dev 2956,00 pps
As can be observed, throughputs achieved in scenarios (2),(3) did not
suffer any observable degradation compared to scenario (1).
Thanks to Jakub Kicinski and David Ahern for their valuable suggestions
and comments provided during the discussion of the proposed RFCs.
[2] https://www.cloudlab.us
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmCJU1UACgkQnJ2qBz9k
QNk62AgAgp05OIXU/AgObb7DvSyI3ycwCV8PeWBpwD8yoDAh5x0tmT7vnJu974p6
yHdnF7rr69ZzvbNCHLJ5kRykRlUao9W7cO5fdOW1uTpL7Ic60QuJMks/NfgVTHp1
2zIQmBDerfn1/LTK8r2pPGcvtcjRcr7Ep4beN0Duw57lfVMJhjsNRPnBbXGBcp0r
QzKk4/8V3DCZvOw+XNC3nto7avjvf+nU9sJmuh83546eqh0atjWivvO5aAlDOe6W
rhBiLlmP0in5u2n1fYqzI1OQvtgtleyEZT2G0CrbAZn0xjmV/if9wl+3K6TOwDvR
778xDEX7sZCaO/xkB+WK3hrd15ftKg==
=0kYE
-----END PGP SIGNATURE-----
Merge tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota, ext2, reiserfs updates from Jan Kara:
- support for path (instead of device) based quotactl syscall
(quotactl_path(2))
- ext2 conversion to kmap_local()
- other minor cleanups & fixes
* tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs/reiserfs/journal.c: delete useless variables
fs/ext2: Replace kmap() with kmap_local_page()
ext2: Match up ext2_put_page() with ext2_dotdot() and ext2_find_entry()
fs/ext2/: fix misspellings using codespell tool
quota: report warning limits for realtime space quotas
quota: wire up quotactl_path
quota: Add mountpath based quota support
-----BEGIN PGP SIGNATURE-----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=ZJ8L
-----END PGP SIGNATURE-----
Merge tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Support for multi-shot mode for POLL requests
- More efficient reference counting. This is shamelessly stolen from
the mm side. Even though referencing is mostly single/dual user, the
128 count was retained to keep the code the same. Maybe this
should/could be made generic at some point.
- Removal of the need to have a manager thread for each ring. The
manager threads only job was checking and creating new io-threads as
needed, instead we handle this from the queue path.
- Allow SQPOLL without CAP_SYS_ADMIN or CAP_SYS_NICE. Since 5.12, this
thread is "just" a regular application thread, so no need to restrict
use of it anymore.
- Cleanup of how internal async poll data lifetime is managed.
- Fix for syzbot reported crash on SQPOLL cancelation.
- Make buffer registration more like file registrations, which includes
flexibility in avoiding full set unregistration and re-registration.
- Fix for io-wq affinity setting.
- Be a bit more defensive in task->pf_io_worker setup.
- Various SQPOLL fixes.
- Cleanup of SQPOLL creds handling.
- Improvements to in-flight request tracking.
- File registration cleanups.
- Tons of cleanups and little fixes
* tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block: (156 commits)
io_uring: maintain drain logic for multishot poll requests
io_uring: Check current->io_uring in io_uring_cancel_sqpoll
io_uring: fix NULL reg-buffer
io_uring: simplify SQPOLL cancellations
io_uring: fix work_exit sqpoll cancellations
io_uring: Fix uninitialized variable up.resv
io_uring: fix invalid error check after malloc
io_uring: io_sq_thread() no longer needs to reset current->pf_io_worker
kernel: always initialize task->pf_io_worker to NULL
io_uring: update sq_thread_idle after ctx deleted
io_uring: add full-fledged dynamic buffers support
io_uring: implement fixed buffers registration similar to fixed files
io_uring: prepare fixed rw for dynanic buffers
io_uring: keep table of pointers to ubufs
io_uring: add generic rsrc update with tags
io_uring: add IORING_REGISTER_RSRC
io_uring: enumerate dynamic resources
io_uring: add generic path for rsrc update
io_uring: preparation for rsrc tagging
io_uring: decouple CQE filling from requests
...
The current definitions of constants for PROBE, currently defined only
in the net-next kernel branch, are inconsistent, with
some beginning with ICMP and others with simply EXT. This patch
attempts to standardize the naming conventions of the constants for
PROBE before their release into a stable Kernel, and to update the
relevant definitions in net/ipv4/icmp.c.
Similarly, the definitions for the code field (previously
ICMP_EXT_MAL_QUERY, etc) use the same prefixes as the type field. This
patch adds _CODE_ to the prefix to clarify the distinction of these
constants.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210427153635.2591-1-andreas.a.roeseler@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and debugfs interfaces
to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality - but without the previous
regressions
- Add 'scheduler latency debugging': warn after long periods of pending need_resched. This
is an opt-in feature that requires the enabling of the LATENCY_WARN scheduler feature,
or the use of the resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix remaining
balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E7mz
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
debugfs interfaces to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve
performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large
number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality -
but without the previous regressions
- Add 'scheduler latency debugging': warn after long periods of pending
need_resched. This is an opt-in feature that requires the enabling of
the LATENCY_WARN scheduler feature, or the use of the
resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
remaining balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by
CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
cpumask/hotplug: Fix cpu_dying() state tracking
kthread: Fix PF_KTHREAD vs to_kthread() race
sched/debug: Fix cgroup_path[] serialization
sched,psi: Handle potential task count underflow bugs more gracefully
sched: Warn on long periods of pending need_resched
sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
sched/debug: Rename the sched_debug parameter to sched_verbose
sched,fair: Alternative sched_slice()
sched: Move /proc/sched_debug to debugfs
sched,debug: Convert sysctl sched_domains to debugfs
debugfs: Implement debugfs_create_str()
sched,preempt: Move preempt_dynamic to debug.c
sched: Move SCHED_DEBUG sysctl to debugfs
sched: Don't make LATENCYTOP select SCHED_DEBUG
sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
cpumask: Introduce DYING mask
cpumask: Make cpu_{online,possible,present,active}() inline
rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
...
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability enumeration method
introduced on the latest Intel platforms. This table is in a well-defined PCI
namespace location and is read via MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter blocks, but
fancier counters still need to be enumerated explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of 'hybrid' CPUs
and PMUs. Alder Lake is a mix of Golden Cove ('big') and Gracemont ('small' - Atom derived)
cores.
The CPU-side feature set is entirely symmetrical - but on the PMU side there's
core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX profiling, by
fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The immediate motivation
is to support low-overhead sampling-based race detection for user-space code. The
feature consists of the following main changes:
- Add thread-only event inheritance via perf_event_attr::inherit_thread, which limits
inheritance of events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap, extend siginfo with an u64
::si_perf, and add the breakpoint information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the new field can be used
to introduce support for other types of metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NhQ7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability
enumeration method introduced on the latest Intel platforms. This
table is in a well-defined PCI namespace location and is read via
MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter
blocks, but fancier counters still need to be enumerated
explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of
'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
and Gracemont ('small' - Atom derived) cores.
The CPU-side feature set is entirely symmetrical - but on the PMU
side there's core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX
profiling, by fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The
immediate motivation is to support low-overhead sampling-based race
detection for user-space code. The feature consists of the following
main changes:
- Add thread-only event inheritance via
perf_event_attr::inherit_thread, which limits inheritance of
events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via
perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
extend siginfo with an u64 ::si_perf, and add the breakpoint
information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the
new field can be used to introduce support for other types of
metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
signal, perf: Add missing TRAP_PERF case in siginfo_layout()
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
perf/x86: Allow for 8<num_fixed_counters<16
perf/x86/rapl: Add support for Intel Alder Lake
perf/x86/cstate: Add Alder Lake CPU support
perf/x86/msr: Add Alder Lake CPU support
perf/x86/intel/uncore: Add Alder Lake support
perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
perf/x86/intel: Add Alder Lake Hybrid support
perf/x86: Support filter_match callback
perf/x86/intel: Add attr_update for Hybrid PMUs
perf/x86: Add structures for the attributes of Hybrid PMUs
perf/x86: Register hybrid PMUs
perf/x86: Factor out x86_pmu_show_pmu_cap
perf/x86: Remove temporary pmu assignment in event_init
perf/x86/intel: Factor out intel_pmu_check_extra_regs
perf/x86/intel: Factor out intel_pmu_check_event_constraints
perf/x86/intel: Factor out intel_pmu_check_num_counters
perf/x86: Hybrid PMU support for extra_regs
perf/x86: Hybrid PMU support for event constraints
...
- printk fourcc modifier support added %p4cc
core:
- drm_crtc_commit_wait
- atomic plane state helpers reworked for full state
- dma-buf heaps API rework
- edid: rework and improvements for displayid
dp-mst:
- better topology logging
bridge:
- Chipone ICN6211
- Lontium LT8912B
- anx7625 regulator support
panel:
- fix lt9611 4k panels handling
simple-kms:
- add plane state helpers
ttm:
- debugfs support
- removal of unused sysfs
- ignore signaled moved fences
- ioremap buffer according to mem caching
i915:
- Alderlake S enablement
- Conversion to dma_resv_locking
- Bring back watchdog timeout support
- legacy ioctl cleanups
- add GEM TDDO and RFC process
- DG1 LMEM preparation work
- intel_display.c refactoring
- Gen9/TGL PCH combination support
- eDP MSO Support
- multiple PSR instance support
- Link training debug updates
- Disable PSR2 support on JSL/EHL
- DDR5/LPDDR5 support for bw calcs
- LSPCON limited to gen9/10 platforms
- HSW/BDW async flip/VTd corruption workaround
= SAGV watermakr fixes
- SNB hard hang on ring resume fix
- Limit imported dma-buf size
- move to use new tasklet API
- refactor KBL/TGL/ADL-S display/gt steppings
- refactoring legacy DP/HDMI, FB plane code out
amdgpu:
- uapi: add ioctl to query video capabilities
- Iniital AMD Freesync HDMI support
- Initial Adebaran support
- 10bpc dithering improvements
- DCN secure display support
- Drop legacy IO BAR requirements
- PCIE/S0ix/RAS/Prime/Reset fixes
- Display ASSR support
- SMU gfx busy queues for RV/PCO
- Initial LTTPR display work
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- debugfs cleanps
- fw error handling ifix
- Flexible array cleanups
msm:
- big DSI phy/pll cleanup
- sc7280 initial support
- commong bandwidth scaling path
- shrinker locking contention fixes
- unpin/swap support for GEM objcets
ast:
- cursor plane handling reworked
tegra:
- don't register DP AUX channels before connectors
zynqmp:
- fix OOB struct padding memset
gma500:
- drop ttm and medfield support
exynos:
- request_irq cleanup function
mediatek:
- fine tune line time for EOTp
- MT8192 dpi support
- atomic crtc config updates
- don't support HDMI connector creation
mxsdb:
- imx8mm support
panfrost:
-= MMU IRQ handling rework
qxl:
- locking fixes
- resource deallocation changes
sun4i:
- add alpha properties to UI/VI layers
vc4:
- RPi4 CEC support
vmwgfx:
- doc cleanups
arc:
- moved to drm/tiny
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJgiNSVAAoJEAx081l5xIa+fvYP/1206BfOYOx5opt5K3By06ZY
zrOsbeaqFdHzfUR7xVwO4vqQNhkX4Pt8H/U7uYZx8PRdrXzGENwWLIaIskyUrKOd
BtwNqUr0ZXJGDlGg26StnUHKeAXuYXlpBKLta5y4LUTkI+bm6V/oVaDMq4dnah70
2CXS4C2mnaFRLBzuRlraxoGFN4eZkz6Waeyo6PJxn/l2GE2gw+jho0Yrh8e8F2w5
EjQeNF22/uHwznov03XFJlyugecuBDbE8A6Ma/znnkVdBXcT94eUMugbKOKi4Nn6
PuJOEdJxmj/9s3oi6kBERc8dvpOj0O+8Vp+xOzn2U3BVXebvu7VoJsq6FcAvL5lN
ltj4iErxUlEud2GRIVUMx8OTFiKj4ThRFJ2/8Uf22r3P7RHO5E9BLnZBzqIAhDVr
s2cDBMItcxcVHRCmE04h12XAO4libZBb2TVjbqG94Acq7beR76pMszFrmxPmHBEm
NGe1s7+ajxMzsq/NIsk4XAhqSmJo6+ujKyyVnrgvKUVeEaWW1U4YvjhJaetnP4fB
47gF24wOSNFwiCUZlqaIpp/MR4Z8YmaJ7tayWQq4Oj/neWe/yc8xQgQIuE8GL20j
P9eNQNvlBnoxkz275M9x4kVhJ5FRjr7OYnd3sFVnALuj6fnL3Z1RXLqI1lNtIz1d
YM89veZuNxMaiDz8roPH
=bLWZ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"The usual lots of work all over the place.
i915 has gotten some Alderlake work and prelim DG1 code, along with a
major locking rework over the GEM code, and brings back the property
of timing out long running jobs using a watchdog. amdgpu has some
Alderbran support (new GPU), freesync HDMI support along with a lot
other fixes.
Outside of the drm, there is a new printf specifier added which should
have all the correct acks/sobs:
- printk fourcc modifier support added %p4cc
Summary:
core:
- drm_crtc_commit_wait
- atomic plane state helpers reworked for full state
- dma-buf heaps API rework
- edid: rework and improvements for displayid
dp-mst:
- better topology logging
bridge:
- Chipone ICN6211
- Lontium LT8912B
- anx7625 regulator support
panel:
- fix lt9611 4k panels handling
simple-kms:
- add plane state helpers
ttm:
- debugfs support
- removal of unused sysfs
- ignore signaled moved fences
- ioremap buffer according to mem caching
i915:
- Alderlake S enablement
- Conversion to dma_resv_locking
- Bring back watchdog timeout support
- legacy ioctl cleanups
- add GEM TDDO and RFC process
- DG1 LMEM preparation work
- intel_display.c refactoring
- Gen9/TGL PCH combination support
- eDP MSO Support
- multiple PSR instance support
- Link training debug updates
- Disable PSR2 support on JSL/EHL
- DDR5/LPDDR5 support for bw calcs
- LSPCON limited to gen9/10 platforms
- HSW/BDW async flip/VTd corruption workaround
- SAGV watermark fixes
- SNB hard hang on ring resume fix
- Limit imported dma-buf size
- move to use new tasklet API
- refactor KBL/TGL/ADL-S display/gt steppings
- refactoring legacy DP/HDMI, FB plane code out
amdgpu:
- uapi: add ioctl to query video capabilities
- Iniital AMD Freesync HDMI support
- Initial Adebaran support
- 10bpc dithering improvements
- DCN secure display support
- Drop legacy IO BAR requirements
- PCIE/S0ix/RAS/Prime/Reset fixes
- Display ASSR support
- SMU gfx busy queues for RV/PCO
- Initial LTTPR display work
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- debugfs cleanps
- fw error handling ifix
- Flexible array cleanups
msm:
- big DSI phy/pll cleanup
- sc7280 initial support
- commong bandwidth scaling path
- shrinker locking contention fixes
- unpin/swap support for GEM objcets
ast:
- cursor plane handling reworked
tegra:
- don't register DP AUX channels before connectors
zynqmp:
- fix OOB struct padding memset
gma500:
- drop ttm and medfield support
exynos:
- request_irq cleanup function
mediatek:
- fine tune line time for EOTp
- MT8192 dpi support
- atomic crtc config updates
- don't support HDMI connector creation
mxsdb:
- imx8mm support
panfrost:
- MMU IRQ handling rework
qxl:
- locking fixes
- resource deallocation changes
sun4i:
- add alpha properties to UI/VI layers
vc4:
- RPi4 CEC support
vmwgfx:
- doc cleanups
arc:
- moved to drm/tiny"
* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
drm/ttm: Don't count pages in SG BOs against pages_limit
drm/ttm: fix return value check
drm/bridge: lt8912b: fix incorrect handling of of_* return values
drm: bridge: fix LONTIUM use of mipi_dsi_() functions
drm: bridge: fix ANX7625 use of mipi_dsi_() functions
drm/amdgpu: page retire over debugfs mechanism
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
drm/amd/display: Fix the Wunused-function warning
drm/radeon/r600: Fix variables that are not used after assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/amd/display: Update DCN302 SR Exit Latency
drm/amdgpu: enable ras eeprom on aldebaran
drm/amdgpu: RAS harvest on driver load
drm/amdgpu: add ras aldebaran ras eeprom driver
drm/amd/pm: increase time out value when sending msg to SMU
drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
drm/amd/pm: add the callback to get vbios bootup values for vangogh
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/amdgpu: move mmhub ras_func init to ip specific file
...
The new attribute indicates that the kernel copies DMA pages on fork,
hence libibverbs' fork support through madvise and MADV_DONTFORK is not
needed.
The introduced attribute is always reported as supported since the kernel
has the patch that added the copy-on-fork behavior. This allows the
userspace library to identify older vs newer kernel versions. Extra care
should be taken when backporting this patch as it relies on the fact that
the copy-on-fork patch is merged, hence no check for support is added.
Don't backport this patch unless you also have the following series:
commit 70e806e4e6 ("mm: Do early cow for pinned pages during fork() for
ptes") and commit 4eae4efa2c ("hugetlb: do early cow when page pinned on
src mm").
Fixes: 70e806e4e6 ("mm: Do early cow for pinned pages during fork() for ptes")
Fixes: 4eae4efa2c ("hugetlb: do early cow when page pinned on src mm")
Link: https://lore.kernel.org/r/20210418121025.66849-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch extends the set infrastructure to add a special catch-all set
element. If the lookup fails to find an element (or range) in the set,
then the catch-all element is selected. Users can specify a mapping,
expression(s) and timeout to be attached to the catch-all element.
This patch adds a catchall list to the set, this list might contain more
than one single catch-all element (e.g. in case that the catch-all
element is removed and a new one is added in the same transaction).
However, most of the time, there will be either one element or no
elements at all in this list.
The catch-all element is identified via NFT_SET_ELEM_CATCHALL flag and
such special element has no NFTA_SET_ELEM_KEY attribute. There is a new
nft_set_elem_catchall object that stores a reference to the dummy
catch-all element (catchall->elem) whose layout is the same of the set
element type to reuse the existing set element codebase.
The set size does not apply to the catch-all element, users can define a
catch-all element even if the set is full.
The check for valid set element flags hava been updates to report
EOPNOTSUPP in case userspace requests flags that are not supported when
using new userspace nftables and old kernel.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* Handle possible -EPROBE_DEFER from parse_mtd_partitions()
* Constify buf in mtd_write_user_prot_reg()
* Constify name param in mtd_bdi_init
* Fix fall-through warnings for Clang
* Get rid of Big MTD Lock ouf of mtdchar
* Drop mtd_mutex usage from mtdchar_open()
* Don't lock when recursively deleting partitions
* Use module_mtd_blktrans() to register driver when relevant
* Parse MTD as NVMEM cells
* New OTP (one-time-programmable) erase ioctl
* Require write permissions for locking and badblock ioctls
* physmap:
- Fix error return code of physmap_flash_remove()
- physmap-bt1-rom: Fix unintentional stack access
* ofpart parser:
- Support Linksys Northstar partitions
- Make symbol 'bcm4908_partitions_quirks' static
- Limit parsing of deprecated DT syntax
- Support BCM4908 fixed partitions
* Qcom parser:
- Incompatible with spi-nor 4k sectors
- Fix error condition
- Extend Qcom SMEM parser to SPI flash
CFI:
* Disable broken buffered writes for CFI chips within ID 0x2201
* Address a Coverity report for unused value
SPI NOR core:
* Add OTP support
* Fix module unload while an op in progress
* Add various cleanup patches
* Add Michael and Pratyush as designated reviewers in MAINTAINERS
SPI NOR controller drivers:
* intel-spi:
- Move platform data header to x86 subfolder
NAND core:
* Fix error handling in nand_prog_page_op() (x2)
* Add a helper to retrieve the number of ECC bytes per step
* Add a helper to retrieve the number of ECC steps
* Let ECC engines advertize the exact number of steps
* ECC Hamming:
- Populate the public nsteps field
- Use the public nsteps field
* ECC BCH:
- Populate the public nsteps field
- Use the public nsteps field
Raw NAND core:
* Add support for secure regions in NAND memory
* Try not to use the ECC private structures
* Remove duplicate include in rawnand.h
* BBT:
- Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED)
Raw NAND controller drivers:
* Qcom:
- Convert bindings to YAML
- Use dma_mapping_error() for error check
- Add missing nand_cleanup() in error path
- Return actual error code instead of -ENODEV
- Update last code word register
- Add helper to configure location register
- Rename parameter name in macro
- Add helper to check last code word
- Convert nandc to chip in Read/Write helper
- Update register macro name for 0x2c offset
* GPMI:
- Fix a double free in gpmi_nand_init
* Rockchip:
- Use flexible-array member instead of zero-length array
* Atmel:
- Update ecc_stats.corrected counter
* MXC:
- Remove unneeded of_match_ptr()
* R852:
- replace spin_lock_irqsave by spin_lock in hard IRQ
* Brcmnand:
- Move to polling in pio mode on oops write
- Read/write oob during EDU transfer
- Fix OOB R/W with Hamming ECC
* FSMC:
- Fix error code in fsmc_nand_probe()
* OMAP:
- Use ECC information from the generic structures
SPI-NAND core:
* Add missing MODULE_DEVICE_TABLE()
SPI-NAND drivers:
* gigadevice: Support GD5F1GQ5UExxG
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmCBq3UACgkQJWrqGEe9
VoS9Xwf+I9W5WZS+WLYdlJ9RvuPDYVyZolZdsxIOOaOGuMAYSLJI/GjWJyHAFdwJ
qIPvr6qFnmKfUUaFZkln5Qk4QSfx+/t7+yj57e3lM9bSBEfTNToMI4AU8X6UAxa5
NHnsU8O8sohnk2UrP1qRtk3IezJ0FdzHbQAc82GQ1QY+IE0NwHg0ETjgESR5iEfq
PSnXb5Dgd637ENUlLsauSLbqFcD8sULvA3fJngxkQbBXDfv3KNZQhNsqw/l7NMY5
rROk8/jv7kgnYs8ObdkWO9SZ9QIiFSLk3vgbrTTNl8ozYpIMVbsrLmsnh7G34RNO
oWmbyOQdMDugaPYLJ9aTQmyI1qbKsA==
=zJPs
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core:
- Handle possible -EPROBE_DEFER from parse_mtd_partitions()
- Constify buf in mtd_write_user_prot_reg()
- Constify name param in mtd_bdi_init
- Fix fall-through warnings for Clang
- Get rid of Big MTD Lock ouf of mtdchar
- Drop mtd_mutex usage from mtdchar_open()
- Don't lock when recursively deleting partitions
- Use module_mtd_blktrans() to register driver when relevant
- Parse MTD as NVMEM cells
- New OTP (one-time-programmable) erase ioctl
- Require write permissions for locking and badblock ioctls
- physmap:
- Fix error return code of physmap_flash_remove()
- physmap-bt1-rom: Fix unintentional stack access
- ofpart parser:
- Support Linksys Northstar partitions
- Make symbol 'bcm4908_partitions_quirks' static
- Limit parsing of deprecated DT syntax
- Support BCM4908 fixed partitions
- Qcom parser:
- Incompatible with spi-nor 4k sectors
- Fix error condition
- Extend Qcom SMEM parser to SPI flash
CFI:
- Disable broken buffered writes for CFI chips within ID 0x2201
- Address a Coverity report for unused value
SPI NOR core:
- Add OTP support
- Fix module unload while an op in progress
- Add various cleanup patches
- Add Michael and Pratyush as designated reviewers in MAINTAINERS
SPI NOR controller drivers:
- intel-spi:
- Move platform data header to x86 subfolder
NAND core:
- Fix error handling in nand_prog_page_op() (x2)
- Add a helper to retrieve the number of ECC bytes per step
- Add a helper to retrieve the number of ECC steps
- Let ECC engines advertize the exact number of steps
- ECC Hamming:
- Populate the public nsteps field
- Use the public nsteps field
- ECC BCH:
- Populate the public nsteps field
- Use the public nsteps field
Raw NAND core:
- Add support for secure regions in NAND memory
- Try not to use the ECC private structures
- Remove duplicate include in rawnand.h
- BBT:
- Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED)
Raw NAND controller drivers:
- Qcom:
- Convert bindings to YAML
- Use dma_mapping_error() for error check
- Add missing nand_cleanup() in error path
- Return actual error code instead of -ENODEV
- Update last code word register
- Add helper to configure location register
- Rename parameter name in macro
- Add helper to check last code word
- Convert nandc to chip in Read/Write helper
- Update register macro name for 0x2c offset
- GPMI:
- Fix a double free in gpmi_nand_init
- Rockchip:
- Use flexible-array member instead of zero-length array
- Atmel:
- Update ecc_stats.corrected counter
- MXC:
- Remove unneeded of_match_ptr()
- R852:
- replace spin_lock_irqsave by spin_lock in hard IRQ
- Brcmnand:
- Move to polling in pio mode on oops write
- Read/write oob during EDU transfer
- Fix OOB R/W with Hamming ECC
- FSMC:
- Fix error code in fsmc_nand_probe()
- OMAP:
- Use ECC information from the generic structures
SPI-NAND core:
- Add missing MODULE_DEVICE_TABLE()
SPI-NAND drivers:
- gigadevice: Support GD5F1GQ5UExxG"
* tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (89 commits)
Revert "mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND"
mtd: core: Constify buf in mtd_write_user_prot_reg()
Revert "mtd: spi-nor: macronix: Add support for mx25l51245g"
mtd: spi-nor: core: Fix an issue of releasing resources during read/write
mtd: cfi_cmdset_0002: remove redundant assignment to variable timeo
mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201
mtd: rawnand: qcom: Use dma_mapping_error() for error check
mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
mtd: rawnand: qcom: Add missing nand_cleanup() in error path
mtd: rawnand: Add support for secure regions in NAND memory
dt-bindings: mtd: Add a property to declare secure regions in NAND chips
dt-bindings: mtd: Convert Qcom NANDc binding to YAML
mtd: spi-nor: winbond: add OTP support to w25q32fw/jw
mtd: spi-nor: implement OTP support for Winbond and similar flashes
mtd: spi-nor: add OTP support
mtd: spi-nor: swp: Improve code around spi_nor_check_lock_status_sr()
mtd: spi-nor: Move Software Write Protection logic out of the core
mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND
include: linux: mtd: Remove duplicate include of nand.h
mtd: parsers: ofpart: support Linksys Northstar partitions
...
- Update NFSv2 and NFSv3 XDR encoding functions
- Add batch Receive posting to the server's RPC/RDMA transport (take 2)
- Reduce page allocator traffic in svcrdma
-----BEGIN PGP SIGNATURE-----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=BOO0
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Highlights:
- Update NFSv2 and NFSv3 XDR encoding functions
- Add batch Receive posting to the server's RPC/RDMA transport (take 2)
- Reduce page allocator traffic in svcrdma"
* tag 'nfsd-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (70 commits)
NFSD: Use DEFINE_SPINLOCK() for spinlock
sunrpc: Remove unused function ip_map_lookup
NFSv4.2: fix copy stateid copying for the async copy
UAPI: nfsfh.h: Replace one-element array with flexible-array member
svcrdma: Clean up dto_q critical section in svc_rdma_recvfrom()
svcrdma: Remove svc_rdma_recv_ctxt::rc_pages and ::rc_arg
svcrdma: Remove sc_read_complete_q
svcrdma: Single-stage RDMA Read
SUNRPC: Move svc_xprt_received() call sites
SUNRPC: Export svc_xprt_received()
svcrdma: Retain the page backing rq_res.head[0].iov_base
svcrdma: Remove unused sc_pages field
svcrdma: Normalize Send page handling
svcrdma: Add a "deferred close" helper
svcrdma: Maintain a Receive water mark
svcrdma: Use svc_rdma_refresh_recvs() in wc_receive
svcrdma: Add a batch Receive posting mechanism
svcrdma: Remove stale comment for svc_rdma_wc_receive()
svcrdma: Provide an explanatory comment in CMA event handler
svcrdma: RPCDBG_FACILITY is no longer used
...
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) The various ip(6)table_foo incarnations are updated to expect
that the table is passed as 'void *priv' argument that netfilter core
passes to the hook functions. This reduces the struct net size by 2
cachelines on x86_64. From Florian Westphal.
2) Add cgroupsv2 support for nftables.
3) Fix bridge log family merge into nf_log_syslog: Missing
unregistration from netns exit path, from Phil Sutter.
4) Add nft_pernet() helper to access nftables pernet area.
5) Add struct nfnl_info to reduce nfnetlink callback footprint and
to facilite future updates. Consolidate nfnetlink callbacks.
6) Add CONFIG_NETFILTER_XTABLES_COMPAT Kconfig knob, also from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the big set of USB and Thunderbolt driver updates for 5.13-rc1.
Lots of little things in here, with loads of tiny fixes and cleanups
over these drivers, as well as these "larger" changes:
- thunderbolt updates and new features added
- xhci driver updates and split out of a mediatek-specific xhci
driver from the main xhci module to make it easier to work
with (something that I have been wanting for a while).
- loads of typec feature additions and updates
- dwc2 driver updates
- dwc3 driver updates
- gadget driver fixes and minor updates
- loads of usb-serial cleanups and fixes and updates
- usbip documentation updates and fixes
- lots of other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa42A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymMEACgkQBzLb5W/IocS+oq7+D7P3V581sAn1Dcy2Qq
Yz370/X2hrjXAyIm7/Cz
=5dj/
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.13-rc1.
Lots of little things in here, with loads of tiny fixes and cleanups
over these drivers, as well as these "larger" changes:
- thunderbolt updates and new features added
- xhci driver updates and split out of a mediatek-specific xhci
driver from the main xhci module to make it easier to work with
(something that I have been wanting for a while).
- loads of typec feature additions and updates
- dwc2 driver updates
- dwc3 driver updates
- gadget driver fixes and minor updates
- loads of usb-serial cleanups and fixes and updates
- usbip documentation updates and fixes
- lots of other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (371 commits)
usb: Fix up movement of USB core kerneldoc location
usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capability
usb: dwc3: Capture new capability register GHWPARAMS9
usb: gadget: prevent a ternary sign expansion bug
usb: dwc3: core: Do core softreset when switch mode
usb: dwc2: Get rid of useless error checks in suspend interrupt
usb: dwc2: Update dwc2_handle_usb_suspend_intr function.
usb: dwc2: Add exit hibernation mode before removing drive
usb: dwc2: Add hibernation exiting flow by system resume
usb: dwc2: Add hibernation entering flow by system suspend
usb: dwc2: Allow exit hibernation in urb enqueue
usb: dwc2: Move exit hibernation to dwc2_port_resume() function
usb: dwc2: Move enter hibernation to dwc2_port_suspend() function
usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated.
usb: dwc2: Clear fifo_map when resetting core.
usb: dwc2: Allow exiting hibernation from gpwrdn rst detect
usb: dwc2: Fix hibernation between host and device modes.
usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
usb: dwc2: Reset DEVADDR after exiting gadget hibernation.
usb: dwc2: Update exit hibernation when port reset is asserted
...
Here is the big set of tty and serial driver updates for 5.13-rc1.
Actually busy this release, with a number of cleanups happening:
- much needed core tty cleanups by Jiri Slaby
- removal of unused and orphaned old-style serial drivers. If
anyone shows up with this hardware, it is trivial to restore
these but we really do not think they are in use anymore.
- fixes and cleanups from Johan Hovold on a number of termios
setting corner cases that loads of drivers got wrong as well
as removing unneeded code due to tty core changes from long
ago that were never propagated out to the drivers
- loads of platform-specific serial port driver updates and
fixes
- coding style cleanups and other small fixes and updates all
over the tty/serial tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa3NQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykMXgCfX3FZgKveI4l94ChXSy4OyKwycHUAn00BzrMC
/7BwA1FnjQnC4zSzuHnm
=bAas
-----END PGP SIGNATURE-----
Merge tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.13-rc1.
Actually busy this release, with a number of cleanups happening:
- much needed core tty cleanups by Jiri Slaby
- removal of unused and orphaned old-style serial drivers. If anyone
shows up with this hardware, it is trivial to restore these but we
really do not think they are in use anymore.
- fixes and cleanups from Johan Hovold on a number of termios setting
corner cases that loads of drivers got wrong as well as removing
unneeded code due to tty core changes from long ago that were never
propagated out to the drivers
- loads of platform-specific serial port driver updates and fixes
- coding style cleanups and other small fixes and updates all over
the tty/serial tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
serial: extend compile-test coverage
serial: stm32: add FIFO threshold configuration
dt-bindings: serial: 8250: update TX FIFO trigger level
dt-bindings: serial: stm32: override FIFO threshold properties
dt-bindings: serial: add RX and TX FIFO properties
serial: xilinx_uartps: drop low-latency workaround
serial: vt8500: drop low-latency workaround
serial: timbuart: drop low-latency workaround
serial: sunsu: drop low-latency workaround
serial: sifive: drop low-latency workaround
serial: txx9: drop low-latency workaround
serial: sa1100: drop low-latency workaround
serial: rp2: drop low-latency workaround
serial: rda: drop low-latency workaround
serial: owl: drop low-latency workaround
serial: msm_serial: drop low-latency workaround
serial: mpc52xx_uart: drop low-latency workaround
serial: meson: drop low-latency workaround
serial: mcf: drop low-latency workaround
serial: lpc32xx_hs: drop low-latency workaround
...
Here is the big set of staging and IIO driver updates for 5.13-rc1.
Lots of little churn in here, and some larger churn as well. Major
things are:
- removal of wimax drivers, no one has this hardware anymore for
this failed "experiment".
- removal of the Google gasket driver, turns out no one wanted
to maintain it or cares about it anymore, so they asked for it
to be removed.
- comedi finally moves out of the staging directory into
drivers/comedi/ This is one of the oldest kernel subsystems
around, being created in the 2.0 kernel days, and was one of
the first things added to drivers/staging/ when that was
created over 15 years ago. It should have been moved out of
staging a long time ago, it's well maintained and used by
loads of different devices in the real world every day. Nice
to see this finally happen.
- so many tiny coding style cleanups it's not funny. Perfect
storm of at least 2 different intern project application
deadlines combined to provide a huge number of new
contributions in this area from people learning how to do
kernel development. Great job to everyone involved here.
There's also the normal updates for IIO drivers with new IIO drivers and
updates all over that subsystem.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa1zw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfMACgq/Qj9n6NO/P4BX55XWjRkjOmxxwAoKrYEWkG
fIdLmhh4FGWkxaJO3Izf
=PCXb
-----END PGP SIGNATURE-----
Merge tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.13-rc1.
Lots of little churn in here, and some larger churn as well. Major
things are:
- removal of wimax drivers, no one has this hardware anymore for this
failed "experiment".
- removal of the Google gasket driver, turns out no one wanted to
maintain it or cares about it anymore, so they asked for it to be
removed.
- comedi finally moves out of the staging directory into drivers/comedi
This is one of the oldest kernel subsystems around, being created
in the 2.0 kernel days, and was one of the first things added to
drivers/staging/ when that was created over 15 years ago.
It should have been moved out of staging a long time ago, it's well
maintained and used by loads of different devices in the real world
every day. Nice to see this finally happen.
- so many tiny coding style cleanups it's not funny.
Perfect storm of at least 2 different intern project application
deadlines combined to provide a huge number of new contributions in
this area from people learning how to do kernel development. Great
job to everyone involved here.
There's also the normal updates for IIO drivers with new IIO drivers
and updates all over that subsystem.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits)
staging: octeon: Use 'for_each_child_of_node'
Staging: rtl8723bs: rtw_xmit: fixed tabbing issue
staging: rtl8188eu: remove unused function parameters
staging: rtl8188eu: cmdThread is a task_struct
staging: rtl8188eu: remove constant variable and dead code
staging: rtl8188eu: change bLeisurePs' type to bool
staging: rtl8723bs: remove empty #ifdef block
staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations
staging: rtl8723bs: split too long line
staging: rtl8723bs: fix indentation in if block
staging: rtl8723bs: fix code indent issue
staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*()
staging: rtl8192e: indent statement properly
staging: rtl8723bs: Remove led_blink_hdl() and everything related
staging: comedi: move out of staging directory
staging: rtl8723bs: remove sdio_drv_priv structure
staging: rtl8723bs: remove unused argument in function
staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration
staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()
staging: rtl8723bs: fix indentation issue introduced by long line split
...
Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through
this tree.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa0CQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylQ/QCgwLQleU5hH/iQwxbHgNL5GawNUroAmwZtxILF
1r6zjmGi0Ak4oFBf7A0T
=Rrl6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through this
tree.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
bluetooth: eliminate the potential race condition when removing the HCI controller
coresight: etm-perf: Fix define build issue when built as module
phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"
phy: ti: j721e-wiz: Add missing include linux/slab.h
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
stm class: Use correct UUID APIs
intel_th: pci: Add Alder Lake-M support
intel_th: pci: Add Rocket Lake CPU support
intel_th: Consistency and off-by-one fix
intel_th: Constify attribute_group structs
intel_th: Constify all drvdata references
stm class: Remove an unused function
habanalabs/gaudi: Fix uninitialized return code rc when read size is zero
greybus: es2: fix kernel-doc warnings
mei: me: add Alder Lake P device id.
dw-xdata-pcie: Update outdated info and improve text format
dw-xdata-pcie: Fix documentation build warns
fbdev: zero-fill colormap in fbcmap.c
firmware: qcom-scm: Fix QCOM_SCM configuration
speakup: i18n: Switch to kmemdup_nul() in spk_msg_set()
...
Highlights:
- Lots of Microsoft Surface work
- platform-profile support for HP and Microsoft Surface devices
- New WMI Gigabyte motherboard temperature monitoring driver
- Intel PMC improvements for Tiger Lake and Alder Lake
- Misc. bugfixes, improvements and quirk additions all over
The following is an automated git shortlog grouped by driver:
Add support for DYTC MMC_GET BIOS API.:
- Add support for DYTC MMC_GET BIOS API.
Adjust Dell drivers to a personal email address:
- Adjust Dell drivers to a personal email address
Fix typo in Kconfig:
- Fix typo in Kconfig
ISST:
- Account for increased timeout in some cases
MAINTAINERS:
- Add missing section for alienware-wmi driver
- Adjust Dell drivers to email alias
- update MELLANOX HARDWARE PLATFORM SUPPORT maintainers
Merge tag 'ib-mfd-platform-x86-v5.13' into review-hans:
- Merge tag 'ib-mfd-platform-x86-v5.13' into review-hans
Merge tag 'irq-no-autoen-2021-03-25' into review-hans:
- Merge tag 'irq-no-autoen-2021-03-25' into review-hans
Typo fix in the file classmate-laptop.c:
- Typo fix in the file classmate-laptop.c
add Gigabyte WMI temperature driver:
- add Gigabyte WMI temperature driver
add support for Advantech software defined button:
- add support for Advantech software defined button
asus-laptop:
- fix kobj_to_dev.cocci warnings
asus-wmi:
- Add param to turn fn-lock mode on by default
dell-wmi-sysman:
- Make init_bios_attributes() ACPI object parsing more robust
- Cleanup create_attributes_level_sysfs_files()
- Make sysman_init() return -ENODEV of the interfaces are not found
- Cleanup sysman_init() error-exit handling
- Fix release_attributes_data() getting called twice on init_bios_attributes() failure
- Make it safe to call exit_foo_attributes() multiple times
- Fix possible NULL pointer deref on exit
- Fix crash caused by calling kset_unregister twice
docs:
- driver-api: Add Surface DTX driver documentation
genirq:
- Add IRQF_NO_AUTOEN for request_irq/nmi()
gigabyte-wmi:
- add support for B550M AORUS PRO-P
- add X570 AORUS ELITE
hp-wmi:
- add platform profile support
- rename "thermal policy" to "thermal profile"
intel-hid:
- Fix spurious wakeups caused by tablet-mode events during suspend
- Support Lenovo ThinkPad X1 Tablet Gen 2
intel-vbtn:
- Remove unused KEYMAP_LEN define
- Stop reporting SW_DOCK events
intel_chtdc_ti_pwrbtn:
- Fix missing IRQF_ONESHOT as only threaded handler
intel_pmc_core:
- Uninitialized data in pmc_core_lpm_latch_mode_write()
- add ACPI dependency
- Fix "unsigned 'ret' is never less than zero" smatch warning
- Add support for Alder Lake PCH-P
- Add LTR registers for Tiger Lake
- Add option to set/clear LPM mode
- Add requirements file to debugfs
- Get LPM requirements for Tiger Lake
- Show LPM residency in microseconds
- Handle sub-states generically
- Remove global struct pmc_dev
- Don't use global pmcdev in quirks
- export platform global reset bits via etr3 sysfs file
- Ignore GBE LTR on Tiger Lake platforms
- Update Kconfig
intel_pmt_class:
- Initial resource to 0
intel_pmt_crashlog:
- Fix incorrect macros
mfd:
- intel_pmt: Add support for DG1
- intel_pmt: Fix nuisance messages and handling of disabled capabilities
panasonic-laptop:
- remove redundant assignment of variable result
platform:
- x86: ACPI: Get rid of ACPICA message printing
platform/mellanox:
- mlxreg-hotplug: move to use request_irq by IRQF_NO_AUTOEN flag
- Typo fix in the file mlxbf-bootctl.c
platform/surface:
- aggregator: fix a bit test
- aggregator: move to use request_irq by IRQF_NO_AUTOEN flag
- aggregator_registry: Give devices time to set up when connecting
- clean up a variable in surface_dtx_read()
- fix semicolon.cocci warnings
- aggregator_registry: Add support for Surface Pro 7+
- aggregator_registry: Make symbol 'ssam_base_hub_group' static
- dtx: Add support for native SSAM devices
- Add DTX driver
- aggregator: Make SSAM_DEFINE_SYNC_REQUEST_x define static functions
- Add platform profile driver
- aggregator_registry: Add HID subsystem devices
- aggregator_registry: Add DTX device
- aggregator_registry: Add platform profile device
- aggregator_registry: Add battery subsystem devices
- aggregator_registry: Add base device hub
- Set up Surface Aggregator device registry
pmc_atom:
- Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
thinkpad_acpi:
- Add labels to the first 2 temperature sensors
- Correct thermal sensor allocation
- Correct minor typo
- sysfs interface to get wwan antenna type
- Disable DYTC CQL mode around switching to balanced mode
- Allow the FnLock LED to change state
- check dytc version for lapmode sysfs
- Handle keyboard cover attach/detach events
tools/power/x86/intel-speed-select:
- v1.9 release
- Drop __DATE__ and __TIME__ macros
- Add options to force online
- Process mailbox read error for core-power
- Increase string size
touchscreen_dmi:
- Add info for the Teclast Tbook 11 tablet
- Handle device properties with software node API
wmi:
- Make remove callback return void
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmCGbVEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9x4ywgAo51ExPQcLMlEDdfpN7oa0ErT+4AF
lKqOHO/g3Am63NwlAVZElKAJq+AChfQzZ+Idy9E/IirFplmhuoKBBRQoB+U9SwYS
zerwNDwAh1j1ZLlWDo0BSsiJLdGJH3j5BvScjo57+Vfa75J9EofIGXvNEjLNxb7j
djLc4FawAfaqL6YerKXZPvYIfpIw2+26SyxDw2s6KlYyBkPIEneQvto0ObWR3vLc
1iFxLgfxL1fYX7dD9e/9H84kIQzs/wgTduXmnSn32BcFw3YOtWpnpwB0wJ8IIXM0
8Ta6jH2ZGTbgfKaHZf2O+UObj8tRXFzjpx4neh5vybRrBsYELzQIm+W+jQ==
=fsK6
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates freom Hans de Goede:
- lots of Microsoft Surface work
- platform-profile support for HP and Microsoft Surface devices
- new WMI Gigabyte motherboard temperature monitoring driver
- Intel PMC improvements for Tiger Lake and Alder Lake
- misc bugfixes, improvements and quirk additions all over
* tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-P
platform/x86: intel_pmc_core: Uninitialized data in pmc_core_lpm_latch_mode_write()
platform/x86: intel_pmc_core: add ACPI dependency
platform/surface: aggregator: fix a bit test
platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" smatch warning
platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet
platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P
platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake
platform/x86: intel_pmc_core: Add option to set/clear LPM mode
platform/x86: intel_pmc_core: Add requirements file to debugfs
platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake
platform/x86: intel_pmc_core: Show LPM residency in microseconds
platform/x86: intel_pmc_core: Handle sub-states generically
platform/x86: intel_pmc_core: Remove global struct pmc_dev
platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only threaded handler
platform/x86: gigabyte-wmi: add X570 AORUS ELITE
platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensors
platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
platform/x86: add Gigabyte WMI temperature driver
...
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not allow
precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON in
softirq context for crypto performance improvements. The conditional
yield support is modified to take softirqs into account and reduce the
latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers, new
functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
-----BEGIN PGP SIGNATURE-----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=6NGI
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not
allow precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON
in softirq context for crypto performance improvements. The
conditional yield support is modified to take softirqs into account
and reduce the latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
new functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64: pac: Optimize kernel entry/exit key installation code paths
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
arm64/sve: Remove redundant system_supports_sve() tests
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
kasan, arm64: tests supports for HW_TAGS async mode
arm64: mte: Report async tag faults before suspend
arm64: mte: Enable async tag check fault
arm64: mte: Conditionally compile mte_enable_kernel_*()
arm64: mte: Enable TCO in functions that can read beyond buffer limits
kasan: Add report for async mode
arm64: mte: Drop arch_enable_tagging()
kasan: Add KASAN mode kernel parameter
arm64: mte: Add asynchronous mode support
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
...
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
Add RISC-V to the list of supported kexec architectures, we need to
add the definition early-on so that later patches can use it.
EM_RISCV is 243 as per ELF psABI specification here:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
A lot of changes here for quite a quiet release in subsystem terms -
there's been a lot of fixes and cleanups all over the subsystem both
from generic work and from people working on specific drivers.
- More cleanup and consolidation work in the core and the generic card
drivers from Morimoto-san.
- Lots of cppcheck fixes for Pierre-Louis Brossart.
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCGv4YACgkQJNaLcl1U
h9DwqAf/bSdRqMQLPAAzU/O79ztMRwSRcF14ygZceoqnNbohwqzeFTHweTK8NINj
dZsZiXK/NYDlcbBE3e5VcYr6g149L+1Xu6HZEY1CBUz7LOR8QaHUXAnJQHuXlv/D
J0EK5NBILR8jk9mpPd/c+dd3lo4liREWTOQKCcIuFI8M5V8CZqtoSfg6RK2qf3Oi
myC3+2pEqI4+h5GQRy5y7mxtFOn4w9kzp49P7EwD9SL9o4VGbsaORMeA+QaOe9PS
KLn6ZKSJ7lBcxvg5a1w4E4SwRC/GA0QY+n1YMNGfrfCm7PSdw4GSyovd9xQKwrvG
vhf+bYkzRBVRqvQP9pvrGGJY9DdDIA==
=A+NC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.13
A lot of changes here for quite a quiet release in subsystem terms -
there's been a lot of fixes and cleanups all over the subsystem both
from generic work and from people working on specific drivers.
- More cleanup and consolidation work in the core and the generic card
drivers from Morimoto-san.
- Lots of cppcheck fixes for Pierre-Louis Brossart.
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715.
The default behavior for source MACVLAN is to duplicate packets to
appropriate type source devices, and then do the normal destination MACVLAN
flow. This patch adds an option to skip destination MACVLAN processing if
any matching source MACVLAN device has the option set.
This allows setting up a "catch all" device for source MACVLAN: create one
or more devices with type source nodst, and one device with e.g. type vepa,
and incoming traffic will be received on exactly one device.
v2: netdev wants non-standard line length
Signed-off-by: Jethro Beekman <kernel@jbeekman.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new io_uring_register() opcode for rsrc registeration. Instead of
accepting a pointer to resources, fds or iovecs, it @arg is now pointing
to a struct io_uring_rsrc_register, and the second argument tells how
large that struct is to make it easily extendible by adding new fields.
All that is done mainly to be able to pass in a pointer with tags. Pass
it in and enable CQE posting for file resources. Doesn't support setting
tags on update yet.
A design choice made here is to not post CQEs on rsrc de-registration,
but only when we updated-removed it by rsrc dynamic update.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c498aaec32a4bb277b2406b9069662c02cdda98c.1619356238.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove unused AMDGPU_GEM_CREATE_SHADOW flag.
Userspace is never allowed to use this.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
-----BEGIN PGP SIGNATURE-----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=fpey
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.13
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
The alignment of a structure is that of its largest member. On
architectures like 32-bit Arm (but not e.g. 32-bit x86) 64-bit integers
will require 64-bit alignment and not its natural word size.
This means that there is no portable way to add 64-bit integers to
siginfo_t on 32-bit architectures without breaking the ABI, because
siginfo_t does not yet (and therefore likely never will) contain 64-bit
fields on 32-bit architectures. Adding a 64-bit integer could change the
alignment of the union after the 3 initial int si_signo, si_errno,
si_code, thus introducing 4 bytes of padding shifting the entire union,
which would break the ABI.
One alternative would be to use the __packed attribute, however, it is
non-standard C. Given siginfo_t has definitions outside the Linux kernel
in various standard libraries that can be compiled with any number of
different compilers (not just those we rely on), using non-standard
attributes on siginfo_t should be avoided to ensure portability.
In the case of the si_perf field, word size is sufficient since there is
no exact requirement on size, given the data it contains is user-defined
via perf_event_attr::sig_data. On 32-bit architectures, any excess bits
of perf_event_attr::sig_data will therefore be truncated when copying
into si_perf.
Since si_perf is intended to disambiguate events (e.g. encoding relevant
information if there are more events of the same type), 32 bits should
provide enough entropy to do so on 32-bit architectures.
For 64-bit architectures, no change is intended.
Fixes: fb6cc127e0 ("signal: Introduce TRAP_PERF si_code and si_perf to siginfo")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lkml.kernel.org/r/20210422191823.79012-1-elver@google.com
Add a new flag LANDLOCK_CREATE_RULESET_VERSION to
landlock_create_ruleset(2). This enables to retreive a Landlock ABI
version that is useful to efficiently follow a best-effort security
approach. Indeed, it would be a missed opportunity to abort the whole
sandbox building, because some features are unavailable, instead of
protecting users as much as possible with the subset of features
provided by the running kernel.
This new flag enables user space to identify the minimum set of Landlock
features supported by the running kernel without relying on a filesystem
interface (e.g. /proc/version, which might be inaccessible) nor testing
multiple syscall argument combinations (i.e. syscall bisection). New
Landlock features will be documented and tied to a minimum version
number (greater than 1). The current version will be incremented for
each new kernel release supporting new Landlock features. User space
libraries can leverage this information to seamlessly restrict processes
as much as possible while being compatible with newer APIs.
This is a much more lighter approach than the previous
landlock_get_features(2): the complexity is pushed to user space
libraries. This flag meets similar needs as securityfs versions:
selinux/policyvers, apparmor/features/*/version* and tomoyo/version.
Supporting this flag now will be convenient for backward compatibility.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-14-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
These 3 system calls are designed to be used by unprivileged processes
to sandbox themselves:
* landlock_create_ruleset(2): Creates a ruleset and returns its file
descriptor.
* landlock_add_rule(2): Adds a rule (e.g. file hierarchy access) to a
ruleset, identified by the dedicated file descriptor.
* landlock_restrict_self(2): Enforces a ruleset on the calling thread
and its future children (similar to seccomp). This syscall has the
same usage restrictions as seccomp(2): the caller must have the
no_new_privs attribute set or have CAP_SYS_ADMIN in the current user
namespace.
All these syscalls have a "flags" argument (not currently used) to
enable extensibility.
Here are the motivations for these new syscalls:
* A sandboxed process may not have access to file systems, including
/dev, /sys or /proc, but it should still be able to add more
restrictions to itself.
* Neither prctl(2) nor seccomp(2) (which was used in a previous version)
fit well with the current definition of a Landlock security policy.
All passed structs (attributes) are checked at build time to ensure that
they don't contain holes and that they are aligned the same way for each
architecture.
See the user and kernel documentation for more details (provided by a
following commit):
* Documentation/userspace-api/landlock.rst
* Documentation/security/landlock.rst
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Link: https://lore.kernel.org/r/20210422154123.13086-9-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Using Landlock objects and ruleset, it is possible to tag inodes
according to a process's domain. To enable an unprivileged process to
express a file hierarchy, it first needs to open a directory (or a file)
and pass this file descriptor to the kernel through
landlock_add_rule(2). When checking if a file access request is
allowed, we walk from the requested dentry to the real root, following
the different mount layers. The access to each "tagged" inodes are
collected according to their rule layer level, and ANDed to create
access to the requested file hierarchy. This makes possible to identify
a lot of files without tagging every inodes nor modifying the
filesystem, while still following the view and understanding the user
has from the filesystem.
Add a new ARCH_EPHEMERAL_INODES for UML because it currently does not
keep the same struct inodes for the same inodes whereas these inodes are
in use.
This commit adds a minimal set of supported filesystem access-control
which doesn't enable to restrict all file-related actions. This is the
result of multiple discussions to minimize the code of Landlock to ease
review. Thanks to the Landlock design, extending this access-control
without breaking user space will not be a problem. Moreover, seccomp
filters can be used to restrict the use of syscall families which may
not be currently handled by Landlock.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-8-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Add QP numbers that are associated with the SRQ to the SRQ information.
The QPs are displayed in a range form.
Sample output:
$ rdma res show srq
dev ibp8s0f0 srqn 0 type BASIC pdn 3 comm [ib_ipoib]
dev ibp8s0f0 srqn 4 type BASIC lqpn 125-128,130-140 pdn 9 pid 3581 comm ibv_srq_pingpon
dev ibp8s0f0 srqn 5 type BASIC lqpn 141-156 pdn 10 pid 3584 comm ibv_srq_pingpon
dev ibp8s0f0 srqn 6 type BASIC lqpn 157-172 pdn 11 pid 3590 comm ibv_srq_pingpon
dev ibp8s0f1 srqn 0 type BASIC pdn 3 comm [ib_ipoib]
dev ibp8s0f1 srqn 1 type BASIC lqpn 329-344 pdn 4 pid 3586 comm ibv_srq_pingpon
$ rdma res show srq lqpn 126-141
dev ibp8s0f0 srqn 4 type BASIC lqpn 126-128,130-140 pdn 9 pid 3581 comm ibv_srq_pingpon
dev ibp8s0f0 srqn 5 type BASIC lqpn 141 pdn 10 pid 3584 comm ibv_srq_pingpon
$ rdma res show srq lqpn 127
dev ibp8s0f0 srqn 4 type BASIC lqpn 127 pdn 9 pid 3581 comm ibv_srq_pingpon
Link: https://lore.kernel.org/r/79a4bd4caec2248fd9583cccc26786af8e4414fc.1618753110.git.leonro@nvidia.com
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend the RDMA nldev return a SRQ information, like SRQ number, SRQ type,
PD number, CQ number and process ID that created that SRQ.
Sample output:
$ rdma res show srq
dev ibp8s0f0 srqn 0 type BASIC pdn 3 comm [ib_ipoib]
dev ibp8s0f0 srqn 4 type BASIC pdn 9 pid 3581 comm ibv_srq_pingpon
dev ibp8s0f0 srqn 5 type BASIC pdn 10 pid 3584 comm ibv_srq_pingpon
dev ibp8s0f0 srqn 6 type BASIC pdn 11 pid 3590 comm ibv_srq_pingpon
dev ibp8s0f1 srqn 0 type BASIC pdn 3 comm [ib_ipoib]
dev ibp8s0f1 srqn 1 type BASIC pdn 4 pid 3586 comm ibv_srq_pingpon
Link: https://lore.kernel.org/r/322f9210b95812799190dd4a0fb92f3a3bba0333.1618753110.git.leonro@nvidia.com
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend the RDMA nldev return a context information, like ctx number and
process ID that created that context. This functionality is helpful to
find orphan contexts that are not closed for some reason.
Sample output:
$ rdma res show ctx
dev ibp8s0f0 ctxn 0 pid 980 comm ibv_rc_pingpong
dev ibp8s0f0 ctxn 1 pid 981 comm ibv_rc_pingpong
dev ibp8s0f0 ctxn 2 pid 992 comm ibv_rc_pingpong
dev ibp8s0f1 ctxn 0 pid 984 comm ibv_rc_pingpong
dev ibp8s0f1 ctxn 1 pid 987 comm ibv_rc_pingpong
$ rdma res show ctx dev ibp8s0f1
dev ibp8s0f1 ctxn 0 pid 984 comm ibv_rc_pingpong
dev ibp8s0f1 ctxn 1 pid 987 comm ibv_rc_pingpong
Link: https://lore.kernel.org/r/5c956acfeac4e9d532988575f3da7d64cb449374.1618753110.git.leonro@nvidia.com
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The command is used for copying the incoming buffer into the
SEV guest memory space.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <c5d0e3e719db7bb37ea85d79ed4db52e9da06257.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command is used to create the encryption context for an incoming
SEV guest. The encryption context can be later used by the hypervisor
to import the incoming data into the SEV guest memory space.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <c7400111ed7458eee01007c4d8d57cdf2cbb0fc2.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After completion of SEND_START, but before SEND_FINISH, the source VMM can
issue the SEND_CANCEL command to stop a migration. This is necessary so
that a cancelled migration can restart with a new target later.
Reviewed-by: Nathan Tempelman <natet@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Steve Rutherford <srutherford@google.com>
Message-Id: <20210412194408.2458827-1-srutherford@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command is used for encrypting the guest memory region using the encryption
context created with KVM_SEV_SEND_START.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by : Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <d6a6ea740b0c668b30905ae31eac5ad7da048bb3.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a capability for userspace to mirror SEV encryption context from
one vm to another. On our side, this is intended to support a
Migration Helper vCPU, but it can also be used generically to support
other in-guest workloads scheduled by the host. The intention is for
the primary guest and the mirror to have nearly identical memslots.
The primary benefits of this are that:
1) The VMs do not share KVM contexts (think APIC/MSRs/etc), so they
can't accidentally clobber each other.
2) The VMs can have different memory-views, which is necessary for post-copy
migration (the migration vCPUs on the target need to read and write to
pages, when the primary guest would VMEXIT).
This does not change the threat model for AMD SEV. Any memory involved
is still owned by the primary guest and its initial state is still
attested to through the normal SEV_LAUNCH_* flows. If userspace wanted
to circumvent SEV, they could achieve the same effect by simply attaching
a vCPU to the primary VM.
This patch deliberately leaves userspace in charge of the memslots for the
mirror, as it already has the power to mess with them in the primary guest.
This patch does not support SEV-ES (much less SNP), as it does not
handle handing off attested VMSAs to the mirror.
For additional context, we need a Migration Helper because SEV PSP
migration is far too slow for our live migration on its own. Using
an in-guest migrator lets us speed this up significantly.
Signed-off-by: Nathan Tempelman <natet@google.com>
Message-Id: <20210408223214.2582277-1-natet@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xnack retries are used for page fault recovery. Some AMD chip
families support continuously retry while page table entries are invalid.
The driver must handle the page fault interrupt and fill in a valid entry
for the GPU to continue.
This ioctl allows to enable/disable XNACK retries per KFD process.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add svm (shared virtual memory) ioctl data structure and API definition.
The svm ioctl API is designed to be extensible in the future. All
operations are provided by a single IOCTL to preserve ioctl number
space. The arguments structure ends with a variable size array of
attributes that can be used to set or get one or multiple attributes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* set sk_pacing_shift for 802.3->802.11 encap offload
* some monitor support for 802.11->802.3 decap offload
* HE (802.11ax) spec updates
* userspace API for TDLS HE support
* along with various other small features, cleanups and
fixups
-----BEGIN PGP SIGNATURE-----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=b0NQ
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of updates, all over the map:
* set sk_pacing_shift for 802.3->802.11 encap offload
* some monitor support for 802.11->802.3 decap offload
* HE (802.11ax) spec updates
* userspace API for TDLS HE support
* along with various other small features, cleanups and
fixups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
cap_setfcap is required to create file capabilities.
Since commit 8db6c34f1d ("Introduce v3 namespaced file capabilities"),
a process running as uid 0 but without cap_setfcap is able to work
around this as follows: unshare a new user namespace which maps parent
uid 0 into the child namespace.
While this task will not have new capabilities against the parent
namespace, there is a loophole due to the way namespaced file
capabilities are represented as xattrs. File capabilities valid in
userns 1 are distinguished from file capabilities valid in userns 2 by
the kuid which underlies uid 0. Therefore the restricted root process
can unshare a new self-mapping namespace, add a namespaced file
capability onto a file, then use that file capability in the parent
namespace.
To prevent that, do not allow mapping parent uid 0 if the process which
opened the uid_map file does not have CAP_SETFCAP, which is the
capability for setting file capabilities.
As a further wrinkle: a task can unshare its user namespace, then open
its uid_map file itself, and map (only) its own uid. In this case we do
not have the credential from before unshare, which was potentially more
restricted. So, when creating a user namespace, we record whether the
creator had CAP_SETFCAP. Then we can use that during map_write().
With this patch:
1. Unprivileged user can still unshare -Ur
ubuntu@caps:~$ unshare -Ur
root@caps:~# logout
2. Root user can still unshare -Ur
ubuntu@caps:~$ sudo bash
root@caps:/home/ubuntu# unshare -Ur
root@caps:/home/ubuntu# logout
3. Root user without CAP_SETFCAP cannot unshare -Ur:
root@caps:/home/ubuntu# /sbin/capsh --drop=cap_setfcap --
root@caps:/home/ubuntu# /sbin/setcap cap_setfcap=p /sbin/setcap
unable to set CAP_SETFCAP effective capability: Operation not permitted
root@caps:/home/ubuntu# unshare -Ur
unshare: write failed /proc/self/uid_map: Operation not permitted
Note: an alternative solution would be to allow uid 0 mappings by
processes without CAP_SETFCAP, but to prevent such a namespace from
writing any file capabilities. This approach can be seen at [1].
Background history: commit 95ebabde38 ("capabilities: Don't allow
writing ambiguous v3 file capabilities") tried to fix the issue by
preventing v3 fscaps to be written to disk when the root uid would map
to the same uid in nested user namespaces. This led to regressions for
various workloads. For example, see [2]. Ultimately this is a valid
use-case we have to support meaning we had to revert this change in
3b0c2d3eaa ("Revert 95ebabde38 ("capabilities: Don't allow writing
ambiguous v3 file capabilities")").
Link: https://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux.git/log/?h=2021-04-15/setfcap-nsfscaps-v4 [1]
Link: https://github.com/containers/buildah/issues/3071 [2]
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Andrew G. Morgan <morgan@kernel.org>
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Expose a non standard query port via IOCTL that will be used to expose
port attributes that are specific to mlx5 devices.
The new interface receives a port number to query and returns a structure
that contains the available attributes for that port. This will be used
to fill the gap between pure DEVX use cases and use cases where a kernel
needs to inform userspace about various kernel driver configurations that
userspace must use in order to work correctly.
Flags is used to indicate which fields are valid on return.
MLX5_IB_UAPI_QUERY_PORT_VPORT:
The vport number of the queered port.
MLX5_IB_UAPI_QUERY_PORT_VPORT_VHCA_ID:
The VHCA ID of the vport of the queered port.
MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_RX:
The vport's RX ICM address used for sw steering.
MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_TX:
The vport's TX ICM address used for sw steering.
MLX5_IB_UAPI_QUERY_PORT_VPORT_REG_C0:
The metadata used to tag egress packets of the vport.
MLX5_IB_UAPI_QUERY_PORT_ESW_OWNER_VHCA_ID:
The E-Switch owner vhca id of the vport.
Link: https://lore.kernel.org/r/6e2ef13e5a266a6c037eb0105eb1564c7bb52f23.1618743394.git.leonro@nvidia.com
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a note about the two-step process.
v2(Tvrtko):
- Also document the other method of just passing in a buffer which is
large enough, which avoids two ioctl calls. Can make sense for
smaller query items.
v3: prefer kernel-doc references for structs and members
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419105741.27844-4-matthew.auld@intel.com
Add some example usage for the extension chaining also, which is quite
nifty.
v2: (Daniel)
- clarify that the name is just some integer, also document that the
name space is not global
v3: prefer kernel-doc references for structs
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419105741.27844-3-matthew.auld@intel.com
Fix the cases where it is almost already valid kernel doc, for the
others just nerf the warnings for now.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419105741.27844-1-matthew.auld@intel.com
Add a capability, KVM_CAP_SGX_ATTRIBUTE, that can be used by userspace
to grant a VM access to a priveleged attribute, with args[0] holding a
file handle to a valid SGX attribute file.
The SGX subsystem restricts access to a subset of enclave attributes to
provide additional security for an uncompromised kernel, e.g. to prevent
malware from using the PROVISIONKEY to ensure its nodes are running
inside a geniune SGX enclave and/or to obtain a stable fingerprint.
To prevent userspace from circumventing such restrictions by running an
enclave in a VM, KVM restricts guest access to privileged attributes by
default.
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <0b099d65e933e068e3ea934b0523bab070cb8cea.1618196135.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation takes inspiration from the existing bpf_trace_printk
helper but there are a few differences:
To allow for a large number of format-specifiers, parameters are
provided in an array, like in bpf_seq_printf.
Because the output string takes two arguments and the array of
parameters also takes two arguments, the format string needs to fit in
one argument. Thankfully, ARG_PTR_TO_CONST_STR is guaranteed to point to
a zero-terminated read-only map so we don't need a format string length
arg.
Because the format-string is known at verification time, we also do
a first pass of format string validation in the verifier logic. This
makes debugging easier.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-4-revest@chromium.org
Current Hardware events and Hardware cache events have special perf
types, PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE. The two types don't
pass the PMU type in the user interface. For a hybrid system, the perf
subsystem doesn't know which PMU the events belong to. The first capable
PMU will always be assigned to the events. The events never get a chance
to run on the other capable PMUs.
Extend the two types to become PMU aware types. The PMU type ID is
stored at attr.config[63:32].
Add a new PMU capability, PERF_PMU_CAP_EXTENDED_HW_TYPE, to indicate a
PMU which supports the extended PERF_TYPE_HARDWARE and
PERF_TYPE_HW_CACHE.
The PMU type is only required when searching a specific PMU. The PMU
specific codes will only be interested in the 'real' config value, which
is stored in the low 32 bit of the event->attr.config. Update the
event->attr.config in the generic code, so the PMU specific codes don't
need to calculate it separately.
If a user specifies a PMU type, but the PMU doesn't support the extended
type, error out.
If an event cannot be initialized in a PMU specified by a user, error
out immediately. Perf should not try to open it on other PMUs.
The new PMU capability is only set for the X86 hybrid PMUs for now.
Other architectures, e.g., ARM, may need it as well. The support on ARM
may be implemented later separately.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-22-git-send-email-kan.liang@linux.intel.com
Draft P802.11ax_D2.5 defines the following capabilities that
can be negotiated using RSNXE capabilities:
- Secure LTF measurement exchange protocol.
- Secure RTT measurement exchange protocol.
- Management frame protection for all management frames exchanged
during the negotiation and range measurement procedure.
Extend the nl80211 API to allow drivers to declare support for
these new capabilities as part of extended feature.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210409123755.8280e31d8091.Ifcb29f84f432290338f80c8378aa5c9e0a390c93@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This capability will allow the user to know which KVM_GUESTDBG_* bits
are supported.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401135451.1004564-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most devices maintain RMON (RFC 2819) stats - particularly
the "histogram" of packets received by size. Unlike other
RFCs which duplicate IEEE stats, the short/oversized frame
counters in RMON don't seem to match IEEE stats 1-to-1 either,
so expose those, too. Do not expose basic packet, CRC errors
etc - those are already otherwise covered.
Because standard defines packet ranges only up to 1518, and
everything above that should theoretically be "oversized"
- devices often create their own ranges.
Going beyond what the RFC defines - expose the "histogram"
in the Tx direction (assume for now that the ranges will
be the same).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Number of devices maintains the standard-based MAC control
counters for control frames. Add a API for those.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the MAC statistics are included in
struct rtnl_link_stats64, but some fields
are aggregated. Besides it's good to expose
these clearly hardware stats separately.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an interface for reading standard stats, including
stats which don't have a corresponding control interface.
Start with IEEE 802.3 PHY stats. There seems to be only
one stat to expose there.
Define API to not require user space changes when new
stats or groups are added. Groups are based on bitset,
stats have a string set associated.
v1: wrap stats in a nest
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new software event to count context switches
involving cgroup switches. So it's counted only if cgroups of
previous and next tasks are different. Note that it only checks the
cgroups in the perf_event subsystem. For cgroup v2, it shouldn't
matter anyway.
One can argue that we can do this by using existing sched_switch event
with eBPF. But some systems might not have eBPF for some reason so
I'd like to add this as a simple way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210210083327.22726-2-namhyung@kernel.org
Adds bit perf_event_attr::sigtrap, which can be set to cause events to
send SIGTRAP (with si_code TRAP_PERF) to the task where the event
occurred. The primary motivation is to support synchronous signals on
perf events in the task where an event (such as breakpoints) triggered.
To distinguish perf events based on the event type, the type is set in
si_errno. For events that are associated with an address, si_addr is
copied from perf_sample_data.
The new field perf_event_attr::sig_data is copied to si_perf, which
allows user space to disambiguate which event (of the same type)
triggered the signal. For example, user space could encode the relevant
information it cares about in sig_data.
We note that the choice of an opaque u64 provides the simplest and most
flexible option. Alternatives where a reference to some user space data
is passed back suffer from the problem that modification of referenced
data (be it the event fd, or the perf_event_attr) can race with the
signal being delivered (of course, the same caveat applies if user space
decides to store a pointer in sig_data, but the ABI explicitly avoids
prescribing such a design).
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/lkml/YBv3rAT566k+6zjg@hirez.programming.kicks-ass.net/
Introduces the TRAP_PERF si_code, and associated siginfo_t field
si_perf. These will be used by the perf event subsystem to send signals
(if requested) to the task where an event occurred.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de> # asm-generic
Link: https://lkml.kernel.org/r/20210408103605.1676875-6-elver@google.com
Adds bit perf_event_attr::remove_on_exec, to support removing an event
from a task on exec.
This option supports the case where an event is supposed to be
process-wide only, and should not propagate beyond exec, to limit
monitoring to the original process image only.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-5-elver@google.com
Adds bit perf_event_attr::inherit_thread, to restricting inheriting
events only if the child was cloned with CLONE_THREAD.
This option supports the case where an event is supposed to be
process-wide only (including subthreads), but should not propagate
beyond the current process's shared environment.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YBvj6eJR%2FDY2TsEB@hirez.programming.kicks-ass.net/
Similarly to pause statistics add stats for FEC.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
where block is a block of bits FEC operates on.
Each of these counters is defined per lane (PCS instance).
Multiple vendors provide number of corrected _bits_ rather
than/as well as blocks.
This set adds the 2 standard-based block counters and a extra
one for corrected bits.
Counters are exposed to user space via netlink in new attributes.
Each attribute carries an array of u64s, first element is
the total count, and the following ones are a per-lane break down.
Much like with pause stats the operation will not fail when driver
does not implement the get_fec_stats callback (nor can the driver
fail the operation by returning an error). If stats can't be
reported the relevant attributes will be empty.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Couple of dmaengine driver fixes for:
- race and descriptor issue for xilinx driver
- fix interrupt handling, wq state & cleanup, field sizes for
completion, msix permissions for idxd driver
- rumtim pm fix for tegra driver
- double free fix in dma_async_device_register
-----BEGIN PGP SIGNATURE-----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=GduB
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A couple of dmaengine driver fixes for:
- race and descriptor issue for xilinx driver
- fix interrupt handling, wq state & cleanup, field sizes for
completion, msix permissions for idxd driver
- runtime pm fix for tegra driver
- double free fix in dma_async_device_register"
* tag 'dmaengine-fix-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: idxd: fix wq cleanup of WQCFG registers
dmaengine: idxd: clear MSIX permission entry on shutdown
dmaengine: plx_dma: add a missing put_device() on error path
dmaengine: tegra20: Fix runtime PM imbalance on error
dmaengine: Fix a double free in dma_async_device_register
dmaengine: dw: Make it dependent to HAS_IOMEM
dmaengine: idxd: fix wq size store permission state
dmaengine: idxd: fix opcap sysfs attribute output
dmaengine: idxd: fix delta_rec and crc size field for completion record
dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback
dmaengine: xilinx: dpdma: Fix race condition in done IRQ
dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
When posix access ACL is set, it can have an effect on file mode and it can
also need to clear SGID if.
- None of caller's group/supplementary groups match file owner group.
AND
- Caller is not priviliged (No CAP_FSETID).
As of now fuser server is responsible for changing the file mode as
well. But it does not know whether to clear SGID or not.
So add a flag FUSE_SETXATTR_ACL_KILL_SGID and send this info with SETXATTR
to let file server know that sgid needs to be cleared as well.
Reported-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fuse client needs to send additional information to file server when it
calls SETXATTR(system.posix_acl_access), so add extra flags field to the
structure.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is currently no way to discover the target of a tracing program
attachment after the fact. Add this information to bpf_link_info and return
it when querying the bpf_link fd.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413091607.58945-1-toke@redhat.com
Maor Gottlieb says:
====================
This series from Maor extends MEMIC to support atomic operations from the
host in addition to already supported regular read/write.
====================
* 'memic_ops':
RDMA/mlx5: Expose UAPI to query DM
RDMA/mlx5: Add support in MEMIC operations
RDMA/mlx5: Add support to MODIFY_MEMIC command
RDMA/mlx5: Re-organize the DM code
RDMA/mlx5: Move all DM logic to separate file
RDMA/uverbs: Make UVERBS_OBJECT_METHODS to consider line number
net/mlx5: Add MEMIC operations related bits
Expose UAPI to query MEMIC DM, this will let user space application
that didn't allocate the DM but has access to by owning the matching
command FD to retrieve its information.
Link: https://lore.kernel.org/r/20210411122924.60230-8-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
MEMIC buffer, in addition to regular read and write operations, can
support atomic operations from the host.
Introduce and implement new UAPI to allocate address space for MEMIC
operations such as atomic. This includes:
1. Expose new IOCTL for request mapping of MEMIC operation.
2. Hold the operations address in a list, so same operation to same DM
will be allocated only once.
3. Manage refcount on the mlx5_ib_dm object, so it would be keep valid
until all addresses were unmapped.
Link: https://lore.kernel.org/r/20210411122924.60230-7-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
msm-next from Rob:
* Big DSI phy/pll cleanup. Includes some clk patches, acked by
maintainer
* Initial support for sc7280
* compatibles fixes for sm8150/sm8250
* cleanups for all dpu gens to use same bandwidth scaling paths (\o/)
* various shrinker path lock contention optimizations
* unpin/swap support for GEM objects (disabled by default, enable with
msm.enable_eviction=1 .. due to various combinations of iommu drivers
with older gens I want to get more testing on hw I don't have in front
of me before enabling by default)
* The usual assortment of misc fixes and cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvL=4aw15qoY8fbKG9FCgnx8Y-dCtf7xiFwTQSHopwSQg@mail.gmail.com
msm-next pull request has a baseline with stuff from -fixes, roll
forward first.
Some simple conflicts in amdgpu, ttm and one in i915 where git gets
confused and tries to add the same function twice.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This change introduces a prctl that allows the user program to control
which PAC keys are enabled in a particular task. The main reason
why this is useful is to enable a userspace ABI that uses PAC to
sign and authenticate function pointers and other pointers exposed
outside of the function, while still allowing binaries conforming
to the ABI to interoperate with legacy binaries that do not sign or
authenticate pointers.
The idea is that a dynamic loader or early startup code would issue
this prctl very early after establishing that a process may load legacy
binaries, but before executing any PAC instructions.
This change adds a small amount of overhead to kernel entry and exit
due to additional required instruction sequences.
On a DragonBoard 845c (Cortex-A75) with the powersave governor, the
overhead of similar instruction sequences was measured as 4.9ns when
simulating the common case where IA is left enabled, or 43.7ns when
simulating the uncommon case where IA is disabled. These numbers can
be seen as the worst case scenario, since in more realistic scenarios
a better performing governor would be used and a newer chip would be
used that would support PAC unlike Cortex-A75 and would be expected
to be faster than Cortex-A75.
On an Apple M1 under a hypervisor, the overhead of the entry/exit
instruction sequences introduced by this patch was measured as 0.3ns
in the case where IA is left enabled, and 33.0ns in the case where
IA is disabled.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ibc41a5e6a76b275efbaa126b31119dc197b927a5
Link: https://lore.kernel.org/r/d6609065f8f40397a4124654eb68c9f490b4d477.1616123271.git.pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
'linux/blkdev.h' and 'uapi/linux/lightnvm.h' included in 'lightnvm.h'
is duplicated.It is also included in the 5th and 7th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Link: https://lore.kernel.org/r/20210413105257.159260-4-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In 'bpf_ringbuf_reserve()' we require the flag to '0' at the moment.
For 'bpf_ringbuf_{discard,submit,output}' a flag of '0' might send a
notification to the process if needed.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210412192434.944343-1-pctammela@mojatatu.com
Per net/bpf/test_run.c, particular prog types have additional
restrictions around the parameters that can be provided, so document
these in the header.
I didn't bother documenting the limitation on duration for raw
tracepoints since that's an output parameter anyway.
Tested with ./tools/testing/selftests/bpf/test_doc_build.sh.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210410174549.816482-1-joe@cilium.io
This adds two new POLL_ADD flags, IORING_POLL_UPDATE_EVENTS and
IORING_POLL_UPDATE_USER_DATA. As with the other POLL_ADD flag, these are
masked into sqe->len. If set, the POLL_ADD will have the following
behavior:
- sqe->addr must contain the the user_data of the poll request that
needs to be modified. This field is otherwise invalid for a POLL_ADD
command.
- If IORING_POLL_UPDATE_EVENTS is set, sqe->poll_events must contain the
new mask for the existing poll request. There are no checks for whether
these are identical or not, if a matching poll request is found, then it
is re-armed with the new mask.
- If IORING_POLL_UPDATE_USER_DATA is set, sqe->off must contain the new
user_data for the existing poll request.
A POLL_ADD with any of these flags set may complete with any of the
following results:
1) 0, which means that we successfully found the existing poll request
specified, and performed the re-arm procedure. Any error from that
re-arm will be exposed as a completion event for that original poll
request, not for the update request.
2) -ENOENT, if no existing poll request was found with the given
user_data.
3) -EALREADY, if the existing poll request was already in the process of
being removed/canceled/completing.
4) -EACCES, if an attempt was made to modify an internal poll request
(eg not one originally issued ass IORING_OP_POLL_ADD).
The usual -EINVAL cases apply as well, if any invalid fields are set
in the sqe for this command type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The default io_uring poll mode is one-shot, where once the event triggers,
the poll command is completed and won't trigger any further events. If
we're doing repeated polling on the same file or socket, then it can be
more efficient to do multishot, where we keep triggering whenever the
event becomes true.
This deviates from the usual norm of having one CQE per SQE submitted. Add
a CQE flag, IORING_CQE_F_MORE, which tells the application to expect
further completion events from the submitted SQE. Right now the only user
of this is POLL_ADD in multishot mode.
Since sqe->poll_events is using the space that we normally use for adding
flags to commands, use sqe->len for the flag space for POLL_ADD. Multishot
mode is selected by setting IORING_POLL_ADD_MULTI in sqe->len. An
application should expect more CQEs for the specificed SQE if the CQE is
flagged with IORING_CQE_F_MORE. In multishot mode, only cancelation or an
error will terminate the poll request, in which case the flag will be
cleared.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Define get_module_eeprom_by_page() ethtool callback and implement
netlink infrastructure.
get_module_eeprom_by_page() allows network drivers to dump a part of
module's EEPROM specified by page and bank numbers along with offset and
length. It is effectively a netlink replacement for get_module_info()
and get_module_eeprom() pair, which is needed due to emergence of
complex non-linear EEPROM layouts.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add support to reset device after the user closes the file descriptor.
Because we support a single user, we can reset the device (if needs to)
after a user closes its file descriptor to make sure the device is in
idle and clean state for the next user.
- Add a new feature to allow the user to wait on interrupt. This is needed
for future ASICs
- Replace GFP_ATOMIC with GFP_KERNEL wherever possible and add code to
support failure of allocating with GFP_ATOMIC.
- Update code to support the latest firmware image:
- More security features are done in the firmware
- Remove hard-coded assumptions and replace them with values that are
sent to the firmware on loading.
- Print device unusable error
- Reset device in case the communication between driver and firmware
gets out of sync.
- Support new PCI device ids for secured GAUDI.
- Expose current power draw through the INFO IOCTL.
- Support resetting the device upon a request from the BMC (through F/W).
- Always use only a single MSI in GAUDI, due to H/W limitation.
- Improve data-path code by taking out code from spinlock protection.
- Allow user to specify custom timeout per Command Submission.
- Some enhancements to debugfs.
- Various minor changes and improvements.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE7TEboABC71LctBLFZR1NuKta54AFAmByAxcTHG9nYWJiYXlA
a2VybmVsLm9yZwAKCRBlHU24q1rngLzgB/4gkltBLgkp+VaIK+fb7uB34CY096M1
e8iO7eqxjrjW3YymBaHVYVuaogv9/XD1pUap/rsvw4Ytvb3g390wLjHhsHcSW0AM
8gIswu0VqWWrxphe0ns+ArV4j6JWVBkUQ1QDxp9Ut0qMaUZha/EkfAengMseQbjR
3oaPwrUCpPpl4XfZaBTxTg3RyHtXnzi3cFw2b207D9iX8DS69TtLgMPAj5xN4vO2
lei/4ZRJw/MbJSwvmNJt2d7E7CniLQh9sy7JnMeinpG+WD4GMdx1m0bI8fIuKQ11
GkvVRREGHuQ0YtvTIWi9K+GAwJNqIIw/cW8M3+P1+7WjLWAKkyOTtYk5
=ZHBU
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2021-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v5.13:
- Add support to reset device after the user closes the file descriptor.
Because we support a single user, we can reset the device (if needs to)
after a user closes its file descriptor to make sure the device is in
idle and clean state for the next user.
- Add a new feature to allow the user to wait on interrupt. This is needed
for future ASICs
- Replace GFP_ATOMIC with GFP_KERNEL wherever possible and add code to
support failure of allocating with GFP_ATOMIC.
- Update code to support the latest firmware image:
- More security features are done in the firmware
- Remove hard-coded assumptions and replace them with values that are
sent to the firmware on loading.
- Print device unusable error
- Reset device in case the communication between driver and firmware
gets out of sync.
- Support new PCI device ids for secured GAUDI.
- Expose current power draw through the INFO IOCTL.
- Support resetting the device upon a request from the BMC (through F/W).
- Always use only a single MSI in GAUDI, due to H/W limitation.
- Improve data-path code by taking out code from spinlock protection.
- Allow user to specify custom timeout per Command Submission.
- Some enhancements to debugfs.
- Various minor changes and improvements.
* tag 'misc-habanalabs-next-2021-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (41 commits)
habanalabs: print f/w boot unknown error
habanalabs: update to latest F/W communication header
habanalabs/gaudi: skip iATU if F/W security is enabled
habanalabs/gaudi: derive security status from pci id
habanalabs: move dram scrub to free sequence
habanalabs: send dynamic msi-x indexes to f/w
habanalabs/gaudi: clear QM errors only if not in stop_on_err mode
habanalabs: support DEVICE_UNUSABLE error indication from FW
habanalabs: use strscpy instead of sprintf and strlcpy
habanalabs: remove the store jobs array from CS IOCTL
habanalabs/gaudi: add debugfs to DMA from the device
habanalabs/gaudi: sync stream add protection to SOB reset flow
habanalabs: add custom timeout flag per cs
habanalabs: improve utilization calculation
habanalabs: support legacy and new pll indexes
habanalabs: move relevant datapath work outside cs lock
habanalabs: avoid soft lockup bug upon mapping error
habanalabs/gaudi: Update async events header
habanalabs/gaudi: unsecure TPC cfg status registers
habanalabs/gaudi: always use single-msi mode
...
When async binder buffer got exhausted, some normal oneway transactions
will also be discarded and may cause system or application failures. By
that time, the binder debug information we dump may not be relevant to
the root cause. And this issue is difficult to debug if without the
backtrace of the thread sending spam.
This change will send BR_ONEWAY_SPAM_SUSPECT to userspace when oneway
spamming is detected, request to dump current backtrace. Oneway spamming
will be reported only once when exceeding the threshold (target process
dips below 80% of its oneway space, and current process is responsible for
either more than 50 transactions, or more than 50% of the oneway space).
And the detection will restart when the async buffer has returned to a
healthy state.
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Hang Lu <hangl@codeaurora.org>
Link: https://lore.kernel.org/r/1617961246-4502-3-git-send-email-hangl@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Callout devices are long-gone, but the ASYNC_SPLIT_TERMIOS flag was
never added to the deprecation mask.
Add it so that a warning is printed if it is ever used.
Fixes: 8a8ae62f82 ("tty: warn on deprecated serial flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some kernel-internal ASYNC flags have been superseded by tty-port flags
and should no longer be used by kernel drivers.
Fix the misspelled "__KERNEL__" compile guards which failed their sole
purpose to break out-of-tree drivers that have not yet been updated.
Fixes: 5c0517fefc ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac80211, wireless, and bpf trees. No scary regressions here
or in the works, but small fixes for 5.12 changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params
from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding
the rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related
tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool
memory model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SHL0
-----END PGP SIGNATURE-----
Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees.
No scary regressions here or in the works, but small fixes for 5.12
changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt"
* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
net: fix hangup on napi_disable for threaded napi
net: hns3: Trivial spell fix in hns3 driver
lan743x: fix ethernet frame cutoff issue
net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
net: dsa: lantiq_gswip: Don't use PHY auto polling
net: sched: sch_teql: fix null-pointer dereference
ipv6: report errors for iftoken via netlink extack
net: sched: fix err handler in tcf_action_init()
net: sched: fix action overwrite reference counting
Revert "net: sched: bump refcount for new action in ACT replace mode"
ice: fix memory leak of aRFS after resuming from suspend
i40e: Fix sparse warning: missing error code 'err'
i40e: Fix sparse error: 'vsi->netdev' could be null
i40e: Fix sparse error: uninitialized symbol 'ring'
i40e: Fix sparse errors in i40e_txrx.c
i40e: Fix parameters in aq_get_phy_register()
nl80211: fix beacon head validation
bpf, x86: Validate computation of branch displacements for x86-32
bpf, x86: Validate computation of branch displacements for x86-64
...
The store part was never implemented in the code and never been used
by the userspace applications.
We currently use the related parameters to a different purpose with
a defined union. However, there is no point in that and it is better
to just remove the union and the store parameters.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a need to allow to user to send command submissions with
custom timeout as some CS take longer than the max timeout that is
used by default.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add driver implementation for reading the current power from the device
CPU F/W.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=jiCz
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2021-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
====================
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add constants for 2.5G and 5G speed in PCS speed register into mdio.h.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enhance enum nl80211_tdls_peer_capability to configure TDLS peer's
support for HE mode. Userspace decodes the TDLS setup response frame
and confugures the HE mode support to driver if the peer has advertized
HE mode support in TDLS setup response frame. The driver uses this
information to decide whether to include HE operation IE in TDLS setup
confirmation frame.
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
Link: https://lore.kernel.org/r/1614696636-30144-1-git-send-email-vamsin@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This adds support for Bluetooth HCI transport over virtio.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The docs were very sparse with how exactly CMD_ROAM should be
used. Specifically related to BSS information normally obtained
through a user space scan.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Link: https://lore.kernel.org/r/20210311230333.103934-1-prestwoj@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Recompiling with the new extended version of struct rfkill_event
broke systemd in *two* ways:
- It used "sizeof(struct rfkill_event)" to read the event, but
then complained if it actually got something != 8, this broke
it on new kernels (that include the updated API);
- It used sizeof(struct rfkill_event) to write a command, but
didn't implement the intended expansion protocol where the
kernel returns only how many bytes it accepted, and errored
out due to the unexpected smaller size on kernels that didn't
include the updated API.
Even though systemd has now been fixed, that fix may not be always
deployed, and other applications could potentially have similar
issues.
As such, in the interest of avoiding regressions, revert the
default API "struct rfkill_event" back to the original size.
Instead, add a new "struct rfkill_event_ext" that extends it by
the new field, and even more clearly document that applications
should be prepared for extensions in two ways:
* write might only accept fewer bytes on older kernels, and
will return how many to let userspace know which data may
have been ignored;
* read might return anything between 8 (the original size) and
whatever size the application sized its buffer at, indicating
how much event data was supported by the kernel.
Perhaps that will help avoid such issues in the future and we
won't have to come up with another version of the struct if we
ever need to extend it again.
Applications that want to take advantage of the new field will
have to be modified to use struct rfkill_event_ext instead now,
which comes with the danger of them having already been updated
to use it from 'struct rfkill_event', but I found no evidence
of that, and it's still relatively new.
Cc: stable@vger.kernel.org # 5.11
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-r4 (x86-64)
Link: https://lore.kernel.org/r/20210319232510.f1a139cfdd9c.Ic5c7c9d1d28972059e132ea653a21a427c326678@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix remaining issues with kdoc in the ethtool headers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a note on expected handling of reserved fields,
and references to all kdocs. This fixes a bunch
of kdoc warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extended link state structures and enums use kdoc headers
but then do not describe any of the members.
Convert to normal comments.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Performance counts, and ALWAYS_ON counters used for capturing GPU
timestamps, lose their state across suspend/resume cycles. Userspace
tooling for performance monitoring needs to be aware of this. For
example, after a suspend userspace needs to recalibrate it's offset
between CPU and GPU time.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210325012358.1759770-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Implement the hypervisor side of the KVM PTP interface.
The service offers wall time and cycle count from host to guest.
The caller must specify whether they want the host's view of
either the virtual or physical counter.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-7-jianyong.wu@arm.com
This driver never had any open userspace (which for VFIO would include
VM kernel drivers) that use it, and thus should never have been added
by our normal userspace ABI rules.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20210326061311.1497642-2-hch@lst.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add Colorimetry control class for colorimetry controls
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Long Term Reference (LTR) frames are the frames that are encoded
sometime in the past and stored in the DPB buffer list to be used
as reference to encode future frames.
This change adds controls to enable this feature.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Modify the documentation to point out which flags and structs are
used to configure the statistics.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
CoreSight PMU supports aux-buffer for the ETM tracing. The trace
generated by the ETM (associated with individual CPUs, like Intel PT)
is captured by a separate IP (CoreSight TMC-ETR/ETF until now).
The TMC-ETR applies formatting of the raw ETM trace data, as it
can collect traces from multiple ETMs, with the TraceID to indicate
the source of a given trace packet.
Arm Trace Buffer Extension is new "sink" IP, attached to individual
CPUs and thus do not provide additional formatting, like TMC-ETR.
Additionally, a system could have both TRBE *and* TMC-ETR for
the trace collection. e.g, TMC-ETR could be used as a single
trace buffer to collect data from multiple ETMs to correlate
the traces from different CPUs. It is possible to have a
perf session where some events end up collecting the trace
in TMC-ETR while the others in TRBE. Thus we need a way
to identify the type of the trace for each AUX record.
Define the trace formats exported by the CoreSight PMU.
We don't define the flags following the "ETM" as this
information is available to the user when issuing
the session. What is missing is the additional
formatting applied by the "sink" which is decided
at the runtime and the user may not have a control on.
So we define :
- CORESIGHT format (indicates the Frame format)
- RAW format (indicates the format of the source)
The default value is CORESIGHT format for all the records
(i,e == 0). Add the RAW format for others that use
raw format.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-3-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Allocate a byte for advertising the PMU specific format type
of the given AUX record. A PMU could end up providing hardware
trace data in multiple format in a single session.
e.g, The format of hardware buffer produced by CoreSight ETM
PMU depends on the type of the "sink" device used for collection
for an event (Traditional TMC-ETR/Bs with formatting or
TRBEs without any formatting).
# Boring story of why this is needed. Goto The_End_of_Story for skipping.
CoreSight ETM trace allows instruction level tracing of Arm CPUs.
The ETM generates the CPU excecution trace and pumps it into CoreSight
AMBA Trace Bus and is collected by a different CoreSight component
(traditionally CoreSight TMC-ETR /ETB/ETF), called "sink".
Important to note that there is no guarantee that every CPU has
a dedicated sink. Thus multiple ETMs could pump the trace data
into the same "sink" and thus they apply additional formatting
of the trace data for the user to decode it properly and attribute
the trace data to the corresponding ETM.
However, with the introduction of Arm Trace buffer Extensions (TRBE),
we now have a dedicated per-CPU architected sink for collecting the
trace. Since the TRBE is always per-CPU, it doesn't apply any formatting
of the trace. The support for this driver is under review [1].
Now a system could have a per-cpu TRBE and one or more shared
TMC-ETRs on the system. A user could choose a "specific" sink
for a perf session (e.g, a TMC-ETR) or the driver could automatically
select the nearest sink for a given ETM. It is possible that
some ETMs could end up using TMC-ETR (e.g, if the TRBE is not
usable on the CPU) while the others using TRBE in a single
perf session. Thus we now have "formatted" trace collected
from TMC-ETR and "unformatted" trace collected from TRBE.
However, we don't get into a situation where a single event
could end up using TMC-ETR & TRBE. i.e, any AUX buffer is
guaranteed to be either RAW or FORMATTED, but not a mix
of both.
As for perf decoding, we need to know the type of the data
in the individual AUX buffers, so that it can set up the
"OpenCSD" (library for decoding CoreSight trace) decoder
instance appropriately. Thus the perf.data file must conatin
the hints for the tool to decode the data correctly.
Since this is a runtime variable, and perf tool doesn't have
a control on what sink gets used (in case of automatic sink
selection), we need this information made available from
the PMU driver for each AUX record.
# The_End_of_Story
Cc: Peter Ziljstra <peterz@infradead.org>
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Cc: will@kernel.org
Cc: mark.rutland@arm.com
Cc: mike.leach@linaro.org
Cc: acme@kernel.org
Cc: jolsa@redhat.com
Cc: Mathieu Poirier <mathieu.poirer@linaro.org>
Reviewed by: Mike Leach <mike.leach@linaro.org>
Acked-by: Peter Ziljstra <peterz@infradead.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-2-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
-----BEGIN PGP SIGNATURE-----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=8odY
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Remove comment that never came to fruition in 22 years of development
(Christoph)
- Remove unused request flag (Christoph)
- Fix for null_blk fake timeout handling (Damien)
- Fix for IOCB_NOWAIT being ignored for O_DIRECT on raw bdevs (Pavel)
- Error propagation fix for multiple split bios (Yufen)
* tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
block: remove the unused RQF_ALLOCED flag
block: update a few comments in uapi/linux/blkpg.h
block: don't ignore REQ_NOWAIT for direct IO
null_blk: fix command timeout completion handling
block: only update parent bi_status when bio fail
The MPTCP reset option allows to carry a mptcp-specific error code that
provides more information on the nature of a connection reset.
Reset option data received gets stored in the subflow context so it can
be sent to userspace via the 'subflow closed' netlink event.
When a subflow is closed, the desired error code that should be sent to
the peer is also placed in the subflow context structure.
If a reset is sent before subflow establishment could complete, e.g. on
HMAC failure during an MP_JOIN operation, the mptcp skb extension is
used to store the reset information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-01
The following pull-request contains BPF updates for your *net-next* tree.
We've added 68 non-merge commits during the last 7 day(s) which contain
a total of 70 files changed, 2944 insertions(+), 1139 deletions(-).
The main changes are:
1) UDP support for sockmap, from Cong.
2) Verifier merge conflict resolution fix, from Daniel.
3) xsk selftests enhancements, from Maciej.
4) Unstable helpers aka kernel func calling, from Martin.
5) Batches ops for LPM map, from Pedro.
6) Fix race in bpf_get_local_storage, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The big top of the file comment talk about grand plans that never
happened, so remove them to not confuse the readers. Also mark the
devname and volname fields as ignored as they were never used by the
kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reusing BPF_SK_SKB_STREAM_VERDICT is possible but its name is
confusing and more importantly we still want to distinguish them
from user-space. So we can just reuse the stream verdict code but
introduce a new type of eBPF program, skb_verdict. Users are not
allowed to attach stream_verdict and skb_verdict programs to the
same map.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-10-xiyou.wangcong@gmail.com
Add FEC API to netlink.
This is not a 1-to-1 conversion.
FEC settings already depend on link modes to tell user which
modes are supported. Take this further an use link modes for
manual configuration. Old struct ethtool_fecparam is still
used to talk to the drivers, so we need to translate back
and forth. We can revisit the internal API if number of FEC
encodings starts to grow.
Enforce only one active FEC bit (by using a bit position
rather than another mask).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with
help from Thomas Hellström)
- watchdog (Tvrtko, one patch to cancel individual request from Chris)
- legacy ioctl cleanup (Jason+Ashutosh)
- i915-gem TODO and RFC process doc (me)
- i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it
and put it in here too
-----BEGIN PGP SIGNATURE-----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=P0yC
-----END PGP SIGNATURE-----
Merge tag 'topic/i915-gem-next-2021-03-26' of ssh://git.freedesktop.org/git/drm/drm into drm-next
special i915-gem-next pull as requested
- Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with
help from Thomas Hellström)
- watchdog (Tvrtko, one patch to cancel individual request from Chris)
- legacy ioctl cleanup (Jason+Ashutosh)
- i915-gem TODO and RFC process doc (me)
- i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it
and put it in here too
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YF24MHoOSjpKFEXA@phenom.ffwll.local
Add definitions for the ICMPV6 type of Extended Echo Request and
Extended Echo Reply, as defined by sections 2 and 3 of RFC 8335.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add definitions for PROBE ICMP types and codes.
Add AFI definitions for IP and IPV6 as specified by IANA
Add a struct to represent the additional header when probing by IP
address (ctype == 3) for use in parsing incoming PROBE messages
Add a struct to represent the entire Interface Identification Object
(IIO) section of an incoming PROBE packet
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In commit ea7800565a ("can: add optional DLC element to Classical
CAN frame structure") the struct can_frame::can_dlc was put into an
anonymous union with another u8 variable.
For various reasons some members in struct can_frame and canfd_frame
including the first 8 byes of data are expected to have the same
memory layout. This is enforced by a BUILD_BUG_ON check in af_can.c.
Since the above mentioned commit this check fails on ARM kernels
compiled with the ARM OABI (which means CONFIG_AEABI not set). In this
case -mabi=apcs-gnu is passed to the compiler, which leads to a
structure size boundary of 32, instead of 8 compared to CONFIG_AEABI
enabled. This means the the union in struct can_frame takes 4 bytes
instead of the expected 1.
Rong Chen illustrates the problem with pahole in the ARM OABI case:
| struct can_frame {
| canid_t can_id; /* 0 4 */
| union {
| __u8 len; /* 4 1 */
| __u8 can_dlc; /* 4 1 */
| }; /* 4 4 */
| __u8 __pad; /* 8 1 */
| __u8 __res0; /* 9 1 */
| __u8 len8_dlc; /* 10 1 */
|
| /* XXX 5 bytes hole, try to pack */
|
| __u8 data[8]
| __attribute__((__aligned__(8))); /* 16 8 */
|
| /* size: 24, cachelines: 1, members: 6 */
| /* sum members: 19, holes: 1, sum holes: 5 */
| /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */
| /* last cacheline: 24 bytes */
| } __attribute__((__aligned__(8)));
Marking the anonymous union as __attribute__((packed)) fixes the
BUILD_BUG_ON problem on these compilers.
Fixes: ea7800565a ("can: add optional DLC element to Classical CAN frame structure")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Rong Chen <rong.a.chen@intel.com>
Link: https://lore.kernel.org/linux-can/2c82ec23-3551-61b5-1bd8-178c3407ee83@hartkopp.net/
Link: https://lore.kernel.org/r/20210325125850.1620-3-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This may sound like a contradiction but some SPI-NOR flashes really
support erasing their OTP region until it is finally locked. Having the
possibility to erase an OTP region might come in handy during
development.
The ioctl argument follows the OTPLOCK style.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210303201819.2752-1-michael@walle.cc
This patch adds support to BPF verifier to allow bpf program calling
kernel function directly.
The use case included in this set is to allow bpf-tcp-cc to directly
call some tcp-cc helper functions (e.g. "tcp_cong_avoid_ai()"). Those
functions have already been used by some kernel tcp-cc implementations.
This set will also allow the bpf-tcp-cc program to directly call the
kernel tcp-cc implementation, For example, a bpf_dctcp may only want to
implement its own dctcp_cwnd_event() and reuse other dctcp_*() directly
from the kernel tcp_dctcp.c instead of reimplementing (or
copy-and-pasting) them.
The tcp-cc kernel functions mentioned above will be white listed
for the struct_ops bpf-tcp-cc programs to use in a later patch.
The white listed functions are not bounded to a fixed ABI contract.
Those functions have already been used by the existing kernel tcp-cc.
If any of them has changed, both in-tree and out-of-tree kernel tcp-cc
implementations have to be changed. The same goes for the struct_ops
bpf-tcp-cc programs which have to be adjusted accordingly.
This patch is to make the required changes in the bpf verifier.
First change is in btf.c, it adds a case in "btf_check_func_arg_match()".
When the passed in "btf->kernel_btf == true", it means matching the
verifier regs' states with a kernel function. This will handle the
PTR_TO_BTF_ID reg. It also maps PTR_TO_SOCK_COMMON, PTR_TO_SOCKET,
and PTR_TO_TCP_SOCK to its kernel's btf_id.
In the later libbpf patch, the insn calling a kernel function will
look like:
insn->code == (BPF_JMP | BPF_CALL)
insn->src_reg == BPF_PSEUDO_KFUNC_CALL /* <- new in this patch */
insn->imm == func_btf_id /* btf_id of the running kernel */
[ For the future calling function-in-kernel-module support, an array
of module btf_fds can be passed at the load time and insn->off
can be used to index into this array. ]
At the early stage of verifier, the verifier will collect all kernel
function calls into "struct bpf_kfunc_desc". Those
descriptors are stored in "prog->aux->kfunc_tab" and will
be available to the JIT. Since this "add" operation is similar
to the current "add_subprog()" and looking for the same insn->code,
they are done together in the new "add_subprog_and_kfunc()".
In the "do_check()" stage, the new "check_kfunc_call()" is added
to verify the kernel function call instruction:
1. Ensure the kernel function can be used by a particular BPF_PROG_TYPE.
A new bpf_verifier_ops "check_kfunc_call" is added to do that.
The bpf-tcp-cc struct_ops program will implement this function in
a later patch.
2. Call "btf_check_kfunc_args_match()" to ensure the regs can be
used as the args of a kernel function.
3. Mark the regs' type, subreg_def, and zext_dst.
At the later do_misc_fixups() stage, the new fixup_kfunc_call()
will replace the insn->imm with the function address (relative
to __bpf_call_base). If needed, the jit can find the btf_func_model
by calling the new bpf_jit_find_kfunc_model(prog, insn).
With the imm set to the function address, "bpftool prog dump xlated"
will be able to display the kernel function calls the same way as
it displays other bpf helper calls.
gpl_compatible program is required to call kernel function.
This feature currently requires JIT.
The verifier selftests are adjusted because of the changes in
the verbose log in add_subprog_and_kfunc().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015142.1544736-1-kafai@fb.com
kdoc does not have good support for documenting defines,
and we can't abuse the enum documentation because it
generates warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct ethtool_fecparam::reserved can't be used in SET, because
ethtool user space doesn't zero-initialize the structure.
Make this clear.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When LVM needs to find a device with a particular UUID it needs to ask for
UUID for each device. This patch returns UUID directly in the list of
devices, so that LVM doesn't have to query all the devices with an ioctl.
The UUID is returned if the flag DM_UUID_FLAG is set in the parameters.
Returning UUID is done in backward-compatible way. There's one unused
32-bit word value after the event number. This patch sets the bit
DM_NAME_LIST_FLAG_HAS_UUID if UUID is present and
DM_NAME_LIST_FLAG_DOESNT_HAVE_UUID if it isn't (if none of these bits is
set, then we have an old kernel that doesn't support returning UUIDs). The
UUID is stored after this word. The 'next' value is updated to point after
the UUID, so that old version of libdevmapper will skip the UUID without
attempting to interpret it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
amd-drm-next-5.13-2021-03-23:
amdgpu:
- Debugfs cleanup
- Various cleanups and spelling fixes
- Flexible array cleanups
- Initial AMD Freesync HDMI
- Display fixes
- 10bpc dithering improvements
- Display ASSR support
- Clean up and unify powerplay and swsmu interfaces
- Vangogh fixes
- Add SMU gfx busy queues for RV/PCO
- PCIE DPM fixes
- S0ix fixes
- GPU metrics data fixes
- DCN secure display support
- Backlight type override
- Add initial support for Aldebaran
- RAS fixes
- Prime fixes for A+A systems
- Reset fixes
- Initial resource cursor support
- Drop legacy IO BAR requirements
- Various power fixes
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- Debugfs cleanups
- Flexible array cleanups
UAPI:
- amdgpu: Add a new INFO ioctl interface to query video capabilities
rather than hardcoding them in userspace. This allows us to provide
fine grained asic capabilities (e.g., if a particular part is
bandwidth limited, we can limit the capabilities). Proposed userspace:
https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_capshttps://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps
- amdkfd: bump the driver version. There was a problem with reporting
some RAS features on older versions of the driver. Proposed userspace:
7cdd63475c
Danvet: A bunch of conflicts all over, but it seems to compile ... I
did put the call to dc_allow_idle_optimizations() on a single line
since it looked a bit too jarring to be left alone.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324040147.1990338-1-alexander.deucher@amd.com
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
-----BEGIN PGP SIGNATURE-----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=jeRJ
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of IIO/counter device support, features and cleanup in the 5.13 cycle
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
* tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (119 commits)
iio: acpi_als: Add trigger support
iio: acpi_als: Add local variable dev in probe
iio: acpi_als: Add timestamp channel
iio: adc: ad7292: Modify the bool initialization assignment
iio: cros: unify hw fifo attributes without API changes
iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
iio: event_monitor: Enable events before monitoring
dt-bindings: iio: adc: Add compatible for Mediatek MT8195
iio:magnetometer: Add Support for ST IIS2MDC
dt-bindings: iio: st,st-sensors add IIS2MDC.
staging: iio: ad9832: kernel-doc fixes
iio:dac:max517.c: Use devm_iio_device_register()
iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
iio: buffer: kfifo_buf: kernel-doc, typo in function name.
iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
iio: adc: adi-axi-adc: Drop false marking for kernel-doc
iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
...
Kunpeng930 supports doorbell isolation to ensure that each queue
has an independent doorbell address space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
struct ethtool_fecparam::active_fec is a GET-only field,
all in-tree drivers correctly ignore it on SET. Clear
the field on SET to avoid any confusion. Again, we can't
reject non-zero now since ethtool user space does not
zero-init the param correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct ethtool_fecparam::reserved is never looked at by the core.
Make sure it's actually 0. Unfortunately we can't return an error
because old ethtool doesn't zero-initialize the structure for SET.
On GET we can be more verbose, there are no in tree (ab)users.
Fix up the kdoc on the structure. Remove the mention of FEC
bypass. Seems like a niche thing to configure in the first
place.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Digging through the mailing list archive @autoneg was part
of the first version of the RFC, this left over comment was
pointed out twice in review but wasn't removed.
The sentence is an exact copy-paste from pauseparam.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/porte/the port/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Various fixes, all over:
1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.
2) Always store the rx queue mapping in veth, from Maciej
Fijalkowski.
3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.
4) Fix memory leak in octeontx2-af from Colin Ian King.
5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
Yonghong Song.
6) Fix tx ptp stats in mlx5, from Aya Levin.
7) Check correct ip version in tun decap, fropm Roi Dayan.
8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.
9) Work item memork leak in mlx5, from Shay Drory.
10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.
11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.
12) Fix data race in pxa168_eth, from Pavel Andrianov.
13) Range validate stab in red_check_params(), from Eric Dumazet.
14) Inherit vlan filtering setting properly in b53 driver, from
Florian Fainelli.
15) Fix rtnl locking in igc driver, from Sasha Neftin.
16) Pause handling fixes in igc driver, from Muhammad Husaini
Zulkifli.
17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.
18) Use after free in qlcnic, from Lv Yunlong.
19) fix crash in fritzpci mISDN, from Tong Zhang.
20) Premature rx buffer reuse in igb, from Li RongQing.
21) Missing termination of ip[a driver message handler arrays, from
Alex Elder.
22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
driver, from Xie He.
23) Use after free in c_can_pci_remove(), from Tong Zhang.
24) Uninitialized variable use in nl80211, from Jarod Wilson.
25) Off by one size calc in bpf verifier, from Piotr Krysiuk.
26) Use delayed work instead of deferrable for flowtable GC, from
Yinjun Zhang.
27) Fix infinite loop in NPC unmap of octeontx2 driver, from
Hariprasad Kelam.
28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
of fifo sizes, from Corentin Labbe.
29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.
30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.
31) Fix psample UAPI breakage, from Ido Schimmel"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
psample: Fix user API breakage
math: Export mul_u64_u64_div_u64
ch_ktls: fix enum-conversion warning
octeontx2-af: Fix memory leak of object buf
ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
net: bridge: don't notify switchdev for local FDB addresses
net/sched: act_ct: clear post_ct if doing ct_clear
net: dsa: don't assign an error value to tag_ops
isdn: capi: fix mismatched prototypes
net/mlx5: SF, do not use ecpu bit for vhca state processing
net/mlx5e: Fix division by 0 in mlx5e_select_queue
net/mlx5e: Fix error path for ethtool set-priv-flag
net/mlx5e: Offload tuple rewrite for non-CT flows
net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
net/mlx5: Add back multicast stats for uplink representor
net: ipconfig: ic_dev can be NULL in ic_close_devs
MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
docs: networking: Fix a typo
r8169: fix DMA being used after buffer free if WoL is enabled
net: ipa: fix init header command validation
...
Cited commit added a new attribute before the existing group reference
count attribute, thereby changing its value and breaking existing
applications on new kernels.
Before:
# psample -l
libpsample ERROR psample_group_foreach: failed to recv message: Operation not supported
After:
# psample -l
Group Num Refcount Group Seq
1 1 0
Fix by restoring the value of the old attribute and remove the
misleading comments from the enumerator to avoid future bugs.
Cc: stable@vger.kernel.org
Fixes: d8bed686ab ("net: psample: Add tunnel support")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Adiel Bidani <adielb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- The Open Routing (Open/R) network protocol netlink handler uses ID 99
- Will also add to `/etc/iproute2/rt_protos` once this is accepted
- For more information: https://github.com/facebook/openr
Signed-off-by: From: Cooper Lees <me@cooperlees.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User space needs to know if binder transactions occurred to frozen
processes. Introduce a new BINDER_GET_FROZEN ioctl and keep track of
transactions occurring to frozen proceses.
Signed-off-by: Marco Ballesio <balejs@google.com>
Signed-off-by: Li Li <dualli@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20210316011630.1121213-4-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frozen tasks can't process binder transactions, so a way is required to
inform transmitting ends of communication failures due to the frozen
state of their receiving counterparts. Additionally, races are possible
between transitions to frozen state and binder transactions enqueued to
a specific process.
Implement BINDER_FREEZE ioctl for user space to inform the binder driver
about the intention to freeze or unfreeze a process. When the ioctl is
called, block the caller until any pending binder transactions toward
the target process are flushed. Return an error to transactions to
processes marked as frozen.
Co-developed-by: Todd Kjos <tkjos@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Marco Ballesio <balejs@google.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Li Li <dualli@google.com>
Link: https://lore.kernel.org/r/20210316011630.1121213-2-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the license boilerplate (containing an obsolete address), because
we now have the SPDX header.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210322141748.1062733-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indicate the availability reliable SRAM EDC state in the new bit
in the device properties.
Proposed userspace changes:
7cdd63475c
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The macro is for memory mapped by GPU as uncached.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The added format is V4L2_PIX_FMT_YUV24, this is a packed
YUV 4:4:4 format, with 8 bits for each component, 24 bits
per sample.
This format is used by the i.MX 8QuadMax and i.MX 8DualXPlus/8QuadXPlus
JPEG encoder/decoder.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix these kernel-doc warnings:
include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCBCRI' not described in enum 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCRCBI' not described in enum 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCrCbI' description in 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCbCrI' description in 'osd_pix_format'
include/media/davinci/vpbe_osd.h:232: warning: expecting prototype for enum davinci_cursor_v_width. Prototype was for enum
osd_cursor_v_width instead
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'ns' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'sof' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'length' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'flags' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'buf' not described in 'uvc_meta_buf'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the following kernel-doc warnings:
include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'm' not described in 'v4l2_plane'
include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'reserved' not described in 'v4l2_plane'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'm' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved2' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1068: warning: Function parameter or member 'tv' not described in 'v4l2_timeval_to_ns'
include/uapi/linux/videodev2.h:1068: warning: Excess function parameter 'ts' description in 'v4l2_timeval_to_ns'
include/uapi/linux/videodev2.h:1138: warning: Function parameter or member 'reserved' not described in 'v4l2_exportbuffer'
include/uapi/linux/videodev2.h:2237: warning: Function parameter or member 'reserved' not described in 'v4l2_plane_pix_format'
include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'hsv_enc' not described in 'v4l2_pix_format_mplane'
include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'reserved' not described in 'v4l2_pix_format_mplane'
include/uapi/linux/videodev2.h:2281: warning: Function parameter or member 'reserved' not described in 'v4l2_sdr_format'
include/uapi/linux/videodev2.h:2315: warning: Function parameter or member 'fmt' not described in 'v4l2_format'
include/uapi/linux/v4l2-subdev.h:53: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_format'
include/uapi/linux/v4l2-subdev.h:66: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_crop'
include/uapi/linux/v4l2-subdev.h:89: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_mbus_code_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_width' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_width' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_height' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_height' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:119: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval'
include/uapi/linux/v4l2-subdev.h:140: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval_enum'
include/uapi/linux/cec.h:406: warning: Function parameter or member 'raw' not described in 'cec_connector_info'
include/uapi/linux/cec.h:470: warning: Function parameter or member 'flags' not described in 'cec_event'
include/media/v4l2-h264.h:82: warning: Function parameter or member 'reflist' not described in 'v4l2_h264_build_p_ref_list'
include/media/v4l2-h264.h:82: warning: expecting prototype for v4l2_h264_build_b_ref_lists(). Prototype was for v4l2_h264_build_p_ref_list()
instead
include/media/cec.h:50: warning: Function parameter or member 'lock' not described in 'cec_devnode'
include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dht' not described in 'v4l2_jpeg_header'
include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dqt' not described in 'v4l2_jpeg_header'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix following warnings:
./scripts/kernel-doc --none include/uapi/linux/v4l2-controls.h
include/uapi/linux/v4l2-controls.h:1727: warning: bad line:
include/uapi/linux/v4l2-controls.h:1853: warning: expecting prototype for struct v4l2_vp8_frame. Prototype was for struct v4l2_ctrl_vp8_frame instead
include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'segment' not described in 'v4l2_ctrl_vp8_frame'
include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'entropy' not described in 'v4l2_ctrl_vp8_frame'
include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'coder_state' not described in 'v4l2_ctrl_vp8_frame'
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Until now, the VP8 V4L2 API was not exported as a public API,
and only defined in a private media header (media/vp8-ctrls.h).
The reason for this was a concern about the API not complete
and ready to support VP8 decoding hardware accelerators.
After reviewing the VP8 specification in detail, and now
that the API is able to support Cedrus and Hantro G1,
we can consider this ready.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the VP8 stateless control types out of staging,
and re-number it to avoid any confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since we are ready to stabilize the VP8 stateless API,
move the parsed VP8 pixel format.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a control to enable inserting of AUD NALU into encoded
bitstream.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make display delay and display delay enable MFC controls standard v4l
controls. This will allow reuse of the controls for other decoder
drivers. Also the new proposed controls are now codec agnostic because
they could be used for any codec.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBXwRseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGX80H/2qQ49e2lbOfIqdR
CBThtgg89QmN9WPTfVhwB6b4vejB7kIiIpOPyJVkaio6lVe8Ewhl064fnGHwXm39
vPy0ZVAB96oaKaki6qi1k7jhCAMpl/vXf1RDe5PaEKPwp3Lr81BlY6dcTPbjxkFP
Uw+uC3iRQnT8msSqA1vnhbDl9w6jfmuxX45Eo9NWGz0hDCpZNOEt2oSo/OcXTH4k
c91FiW8Qv9uZX2tV4VSqFQgVPfneA+OWXMpjMg6kfK3jOJ5cZwmFGAa8ByqWACH/
U9OODYQCsyX5ZM11g7MOt7Iv+YSU8OA0We8KDN4cRZobrCHF0Txp3ZTSPjb/xHE3
9nUM50I=
=a6Go
-----END PGP SIGNATURE-----
Merge 5.12-rc4 into usb-next
We need the usb/thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Report the number of warnings that a user will get for exceeding the
soft limit of a realtime volume. This plugs a gap needed before we
can land a realtime quota implementation for XFS in the next cycle.
Link: https://lore.kernel.org/r/20210318041736.GB22094@magnolia
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
libdrm has supported the newer execbuffer2 ioctl and using it by default
when it exists since libdrm commit b50964027bef which landed Mar 2, 2010.
The i915 and i965 drivers in Mesa at the time both used libdrm and so
did the Intel X11 back-end. The SNA back-end for X11 has always used
execbuffer2.
v2 (Jason Ekstrand):
- Add a comment saying what Linux version it's being removed in.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Keith Packard <keithp@keithp.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-2-jason@jlekstrand.net
Write protect bit, when set, inhibits supervisor writes to the read-only
pages. In guest supervisor shared virtual addressing (SVA), write-protect
should be honored upon guest bind supervisor PASID request.
This patch extends the VT-d portion of the IOMMU UAPI to include WP bit.
WPE bit of the supervisor PASID entry will be set to match CPU CR0.WP bit.
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-3-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
According with USB Device Class Definition for Video Device the
Processing Unit Descriptor bLength should be 12 (10 + bmControlSize),
but it has 11.
Invalid length caused that Processing Unit Descriptor Test Video form
CV tool failed. To fix this issue patch adds bmVideoStandards into
uvc_processing_unit_descriptor structure.
The bmVideoStandards field was added in UVC 1.1 and it wasn't part of
UVC 1.0a.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210315071748.29706-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a description of the IOCTLs and provide information on the default
value of the source and destination addresses.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-4-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As the RPMSG_ADDR_ANY is a valid src or dst address that can be set by
user applications, migrate its definition in user API.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Microsoft Surface Book series devices consist of a so-called
clipboard part (containing the CPU, touchscreen, and primary battery)
and a base part (containing keyboard, secondary battery, and optional
discrete GPU). These parts can be separated, i.e. the clipboard can be
detached and used as tablet.
This detachment process is initiated by pressing a button. On the
Surface Book 2 and 3 (targeted with this commit), the Surface Aggregator
Module (i.e. the embedded controller on those devices) attempts to send
a notification to any listening client driver and waits for further
instructions (i.e. whether the detachment process should continue or be
aborted). If it does not receive a response in a certain time-frame, the
detachment process (by default) continues and the clipboard can be
physically separated. In other words, (by default and) without a driver,
the detachment process takes about 10 seconds to complete.
This commit introduces a driver for this detachment system (called DTX).
This driver allows a user-space daemon to control and influence the
detachment behavior. Specifically, it forwards any detachment requests
to user-space, allows user-space to make such requests itself, and
allows handling of those requests. Requests can be handled by either
aborting, continuing/allowing, or delaying (i.e. resetting the timeout
via a heartbeat commend). The user-space API is implemented via the
/dev/surface/dtx miscdevice.
In addition, user-space can change the default behavior on timeout from
allowing detachment to disallowing it, which is useful if the (optional)
discrete GPU is in use.
Furthermore, this driver allows user-space to receive notifications
about the state of the base, specifically when it is physically removed
(as opposed to detachment requested), in what manner it is connected
(i.e. in reverse-/tent-/studio- or laptop-mode), and what type of base
is connected. Based on this information, the driver also provides a
simple tablet-mode switch (aliasing all modes without keyboard access,
i.e. tablet-mode and studio-mode to its reported tablet-mode).
An implementation of such a user-space daemon, allowing configuration of
detachment behavior via scripts (e.g. safely unmounting USB devices
connected to the base before continuing) can be found at [1].
[1]: https://github.com/linux-surface/surface-dtx-daemon
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210308184819.437438-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For userspace checkpoint and restore (C/R) a way of getting process state
containing RSEQ configuration is needed.
There are two ways this information is going to be used:
- to re-enable RSEQ for threads which had it enabled before C/R
- to detect if a thread was in a critical section during C/R
Since C/R preserves TLS memory and addresses RSEQ ABI will be restored
using the address registered before C/R.
Detection whether the thread is in a critical section during C/R is needed
to enforce behavior of RSEQ abort during C/R. Attaching with ptrace()
before registers are dumped itself doesn't cause RSEQ abort.
Restoring the instruction pointer within the critical section is
problematic because rseq_cs may get cleared before the control is passed
to the migrated application code leading to RSEQ invariants not being
preserved. C/R code will use RSEQ ABI address to find the abort handler
to which the instruction pointer needs to be set.
To achieve above goals expose the RSEQ ABI address and the signature value
with the new ptrace request PTRACE_GET_RSEQ_CONFIGURATION.
This new ptrace request can also be used by debuggers so they are aware
of stops within restartable sequences in progress.
Signed-off-by: Piotr Figiel <figiel@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michal Miroslaw <emmir@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20210226135156.1081606-1-figiel@google.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYFC+9QAKCRDh3BK/laaZ
PNUIAQD+g4qznv8fTiN5Juj+qr42DsLAWutI0EdVvZI4UMe01AEAmlLrlHZCE1dM
inXPu/Nq+0gMytAlodcOkHFtdOZqpgY=
=9izk
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Fix a deadlock and a couple of other bugs"
* tag 'fuse-fixes-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: 32-bit user space ioctl compat for fuse device
virtiofs: Fail dax mount if device does not support it
fuse: fix live lock in fuse_iget()
With a 64-bit kernel build the FUSE device cannot handle ioctl requests
coming from 32-bit user space. This is due to the ioctl command
translation that generates different command identifiers that thus cannot
be used for direct comparisons without proper manipulation.
Explicitly extract type and number from the ioctl command to enable 32-bit
user space compatibility on 64-bit kernel builds.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add a connector type for USB connected display panels.
Some examples of what current userspace will name the connector:
- Weston: "UNNAMED-%d"
- Mutter: "Unknown20-%d"
- X: "Unknown20-%d"
v2:
- Update drm_connector_enum_list
- Add examples to commit message
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313112545.37527-2-noralf@tronnes.org
Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Resolves a merge issue with:
drivers/tty/hvc/hvcs.c
and we want the tty/serial fixes from 5.12-rc3 in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend psample to report the following attributes when available:
* Output traffic class as a 16-bit value
* Output traffic class occupancy in bytes as a 64-bit value
* End-to-end latency of the packet in nanoseconds resolution
* Software timestamp in nanoseconds resolution (always available)
* Packet's protocol. Needed for packet dissection in user space (always
available)
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow a policer action to enforce a rate-limit based on packets-per-second,
configurable using a packet-per-second rate and burst parameters.
e.g.
tc filter add dev tap1 parent ffff: u32 match \
u32 0 0 police pkts_rate 3000 pkts_burst 1000
Testing was unable to uncover a performance impact of this change on
existing features.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The umem DMA list calculation was locked at 4k pages due to confusion
around how this API works and is used when larger pages are present.
The conclusion is:
- umem's cannot extend past what is mapped into the process, so creating
a lage page size and referring to a sub-range is not allowed
- umem's must always have a page offset of zero, except for sub PAGE_SIZE
umems
- The feature of umem_offset to create multiple objects inside a umem
is buggy and isn't used anyplace. Thus we can assume all users of the
current API have umem_offset == 0 as well
Provide a new page size calculator that limits the DMA list to the VA
range and enforces umem_offset == 0.
Allow user space to specify the page sizes which it can accept, this
bitmap must be derived from the intended use of the umem, based on
per-usage HW limitations.
Link: https://lore.kernel.org/r/20210304130501.1102577-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- RTM_NEWNEXTHOP et.al. that handle resilient groups will have a new nested
attribute, NHA_RES_GROUP, whose elements are attributes NHA_RES_GROUP_*.
- RTM_NEWNEXTHOPBUCKET et.al. is a suite of new messages that will
currently serve only for dumping of individual buckets of resilient next
hop groups. For nexthop group buckets, these messages will carry a nested
attribute NHA_RES_BUCKET, whose elements are attributes NHA_RES_BUCKET_*.
There are several reasons why a new suite of messages is created for
nexthop buckets instead of overloading the information on the existing
RTM_{NEW,DEL,GET}NEXTHOP messages.
First, a nexthop group can contain a large number of nexthop buckets (4k
is not unheard of). This imposes limits on the amount of information that
can be encoded for each nexthop bucket given a netlink message is limited
to 64k bytes.
Second, while RTM_NEWNEXTHOPBUCKET is only used for notifications at
this point, in the future it can be extended to provide user space with
control over nexthop buckets configuration.
- The new group type is NEXTHOP_GRP_TYPE_RES. Note that nexthop code is
adjusted to bounce groups with that type for now.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The HIP09 supports XRC transport service, it greatly saves the number of
QPs required to connect all processes in a large cluster.
Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With this change, an ioctl() call is added to open a character device for a
buffer. The ioctl() number is 'i' 0x91, which follows the
IIO_GET_EVENT_FD_IOCTL ioctl.
The ioctl() will return an FD for the requested buffer index. The indexes
are the same from the /sys/iio/devices/iio:deviceX/bufferY (i.e. the Y
variable).
Since there doesn't seem to be a sane way to return the FD for buffer0 to
be the same FD for the /dev/iio:deviceX, this ioctl() will return another
FD for buffer0 (or the first buffer). This duplicate FD will be able to
access the same buffer object (for buffer0) as accessing directly the
/dev/iio:deviceX chardev.
Also, there is no IIO_BUFFER_GET_BUFFER_COUNT ioctl() implemented, as the
index for each buffer (and the count) can be deduced from the
'/sys/bus/iio/devices/iio:deviceX/bufferY' folders (i.e the number of
bufferY folders).
Used following C code to test this:
-------------------------------------------------------------------
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <fcntl.h"
#include <errno.h>
#define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0x91, int)
int main(int argc, char *argv[])
{
int fd;
int fd1;
int ret;
if ((fd = open("/dev/iio:device0", O_RDWR))<0) {
fprintf(stderr, "Error open() %d errno %d\n",fd, errno);
return -1;
}
fprintf(stderr, "Using FD %d\n", fd);
fd1 = atoi(argv[1]);
ret = ioctl(fd, IIO_BUFFER_GET_FD_IOCTL, &fd1);
if (ret < 0) {
fprintf(stderr, "Error for buffer %d ioctl() %d errno %d\n", fd1, ret, errno);
close(fd);
return -1;
}
fprintf(stderr, "Got FD %d\n", fd1);
close(fd1);
close(fd);
return 0;
}
-------------------------------------------------------------------
Results are:
-------------------------------------------------------------------
# ./test 0
Using FD 3
Got FD 4
# ./test 1
Using FD 3
Got FD 4
# ./test 2
Using FD 3
Got FD 4
# ./test 3
Using FD 3
Got FD 4
# ls /sys/bus/iio/devices/iio\:device0
buffer buffer0 buffer1 buffer2 buffer3 dev
in_voltage_sampling_frequency in_voltage_scale
in_voltage_scale_available
name of_node power scan_elements subsystem uevent
-------------------------------------------------------------------
iio:device0 has some fake kfifo buffers attached to an IIO device.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210215104043.91251-21-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
struct v4l2_ctrl_h264_pps members obviously match picture parameter syntax,
not sequence parameter syntax.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-10
The following pull-request contains BPF updates for your *net* tree.
We've added 8 non-merge commits during the last 5 day(s) which contain
a total of 11 files changed, 136 insertions(+), 17 deletions(-).
The main changes are:
1) Reject bogus use of vmlinux BTF as map/prog creation BTF, from Alexei Starovoitov.
2) Fix allocation failure splat in x86 JIT for large progs. Also fix overwriting
percpu cgroup storage from tracing programs when nested, from Yonghong Song.
3) Fix rx queue retrieval in XDP for multi-queue veth, from Maciej Fijalkowski.
4) Fix bpf_check_mtu() helper API before freeze to have mtu_len as custom skb/xdp
L3 input length, from Jesper Dangaard Brouer.
5) Fix inode_storage's lookup_elem return value upon having bad fd, from Tal Lossos.
6) Fix bpftool and libbpf cross-build on MacOS, from Georgi Valkov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Cyclades driver was orphaned by commit d459883e6c (MAINTAINERS:
remove two dead e-mail) 13 years ago. Noone stepped up to take care of
them and to fix all the issues the driver has.
On the top of that, there is no way to obtain the firmware for Z cards
from the vendor as cyclades.com ceased to exist.
So it's time to drop the driver with all its traces.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210302062214.29627-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-09
The following pull-request contains BPF updates for your *net-next* tree.
We've added 90 non-merge commits during the last 17 day(s) which contain
a total of 114 files changed, 5158 insertions(+), 1288 deletions(-).
The main changes are:
1) Faster bpf_redirect_map(), from Björn.
2) skmsg cleanup, from Cong.
3) Support for floating point types in BTF, from Ilya.
4) Documentation for sys_bpf commands, from Joe.
5) Support for sk_lookup in bpf_prog_test_run, form Lorenz.
6) Enable task local storage for tracing programs, from Song.
7) bpf_for_each_map_elem() helper, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
Document all of the DRM_CAP_* defines.
v2 (Pekka):
- Describe what the bit depth is
- Expand on preferred dumb buffer memory access patterns
- Explain what a PRIME buffer is
- Mention DRM_IOCTL_PRIME_FD_TO_HANDLE and DRM_IOCTL_PRIME_HANDLE_TO_FD
- Explicitly reference CLOCK_REALTIME and CLOCK_MONOTONIC
- Make it clear DRM_CAP_CRTC_IN_VBLANK_EVENT applies to both DRM_EVENT_VBLANK
and DRM_EVENT_FLIP_COMPLETE
v3 (Daniel):
- Specify kernel versions for caps that don't depend on drivers
- Make it clear dumb buffers caps are only about dumb buffers
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210308123421.747836-1-contact@emersion.fr
The FIB lookup example[1] show how the IP-header field tot_len
(iph->tot_len) is used as input to perform the MTU check.
This patch extend the BPF-helper bpf_check_mtu() with the same ability
to provide the length as user parameter input, via mtu_len parameter.
This still needs to be done before the bpf_check_mtu() helper API
becomes frozen.
[1] samples/bpf/xdp_fwd_kern.c
Fixes: 34b2021cc6 ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161521555850.3515614.6533850861569774444.stgit@firesoul
Introduce skeleton of the virtio sound driver. The driver implements
the virtio sound device specification, which has become part of the
virtio standard.
Initial initialization of the device, virtqueues and creation of an
empty ALSA sound device.
Signed-off-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Link: https://lore.kernel.org/r/20210302164709.3142702-3-anton.yakovlev@opensynergy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect enum type definition in nfnetlink_cthelper UAPI,
from Dmitry V. Levin.
2) Remove extra space in deprecated automatic helper assignment
notice, from Klemen Košir.
3) Drop early socket demux socket after NAT mangling, from
Florian Westphal. Add a test to exercise this bug.
4) Fix bogus invalid packet report in the conntrack TCP tracker,
also from Florian.
5) Fix access to xt[NFPROTO_UNSPEC] list with no mutex
in target/match_revfn(), from Vasily Averin.
6) Disallow updates on the table ownership flag.
7) Fix double hook unregistration of tables with owner.
8) Remove bogus check on the table owner in __nft_release_tables().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_skb_adjust_room sets the inner_protocol as skb->protocol for packets
encapsulation. But that is not appropriate when pushing Ethernet header.
Add an option to further specify encap L2 type and set the inner_protocol
as ETH_P_TEB.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xuesen Huang <huangxuesen@kuaishou.com>
Signed-off-by: Zhiyong Cheng <chengzhiyong@kuaishou.com>
Signed-off-by: Li Wang <wangli09@kuaishou.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20210304064046.6232-1-hxseverything@gmail.com
Allow to pass sk_lookup programs to PROG_TEST_RUN. User space
provides the full bpf_sk_lookup struct as context. Since the
context includes a socket pointer that can't be exposed
to user space we define that PROG_TEST_RUN returns the cookie
of the selected socket or zero in place of the socket pointer.
We don't support testing programs that select a reuseport socket,
since this would mean running another (unrelated) BPF program
from the sk_lookup test handler.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210303101816.36774-3-lmb@cloudflare.com
Abstract out the target parameter so that upcoming commits, more than
just the existing "helpers" target can be called to generate specific
portions of docs from the eBPF UAPI headers.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-10-joe@cilium.io
Based roughly on the following commits:
* Commit cb4d03ab49 ("bpf: Add generic support for lookup batch op")
* Commit 057996380a ("bpf: Add batch ops to all htab bpf map")
* Commit aa2e93b8e5 ("bpf: Add generic support for update and delete
batch ops")
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-9-joe@cilium.io
Commit 468e2f64d2 ("bpf: introduce BPF_PROG_QUERY command") originally
introduced this, but there have been several additions since then.
Unlike BPF_PROG_ATTACH, it appears that the sockmap progs are not able
to be queried so far.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-8-joe@cilium.io
Based on a brief read of the corresponding source code.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-7-joe@cilium.io
Commit b2197755b2 ("bpf: add support for persistent maps/progs")
contains the original implementation and git logs, used as reference for
this documentation.
Also pull in the filename restriction as documented in commit 6d8cb045cd
("bpf: comment why dots in filenames under BPF virtual FS are not allowed")
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-5-joe@cilium.io
Document the meaning of the BPF_F_LOCK flag for the map lookup/update
descriptions. Based on commit 96049f3afd ("bpf: introduce BPF_F_LOCK
flag").
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-4-joe@cilium.io
Introduce high-level descriptions of the intent and return codes of the
bpf() syscall commands. Subsequent patches may further flesh out the
content to provide a more useful programming reference.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-3-joe@cilium.io
These descriptions are present in the man-pages project from the
original submissions around 2015-2016. Import them so that they can be
kept up to date as developers extend the bpf syscall commands.
These descriptions follow the pattern used by scripts/bpf_helpers_doc.py
so that we can take advantage of the parser to generate more up-to-date
man page writing based upon these headers.
Some minor wording adjustments were made to make the descriptions
more consistent for the description / return format.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-2-joe@cilium.io
Co-authored-by: Alexei Starovoitov <ast@kernel.org>
Co-authored-by: Michael Kerrisk <mtk.manpages@gmail.com>
* selftests fixes
* Add runstate information to the new Xen support
* Allow compiling out the Xen interface
* 32-bit PAE without EPT bugfix
* NULL pointer dereference bugfix
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA+lGcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMaMQf/Q8bQr5vVAeNk+1MyRmzNqFEbLqbe
h50f4Wd2N+svZ6XinQH1vvuQm1WYj/g616Q3nCeYwCJyY34g5tf60XcuAMnVRIzw
qc2IUvSAJ3faVElMrSA5thN3bkPzJpRrdIpQGBgOd+rT+eQkPSsJlTy34JJmvbmh
xFGjoVj49tYEkFfpxEbtytW6QiYtPz/ai8SARRXbEUWO/pVzdkgK5XWshRhE9vpB
GLCEXUngdPokJMblRMuK4YOSFQXXHobAJAgPwSzguDV41qezXaKOGYOLe7+V+0kH
z607RnQc1wGgsLanT13okYMQr09/XCjpvFkZ9CK2bIJPsyWP+ihA/37hVQ==
=1GNo
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- Doc fixes
- selftests fixes
- Add runstate information to the new Xen support
- Allow compiling out the Xen interface
- 32-bit PAE without EPT bugfix
- NULL pointer dereference bugfix
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Clear the CR4 register on reset
KVM: x86/xen: Add support for vCPU runstate information
KVM: x86/xen: Fix return code when clearing vcpu_info and vcpu_time_info
selftests: kvm: Mmap the entire vcpu mmap area
KVM: Documentation: Fix index for KVM_CAP_PPC_DAWR1
KVM: x86: allow compiling out the Xen hypercall interface
KVM: xen: flush deferred static key before checking it
KVM: x86/mmu: Set SPTE_AD_WRPROT_ONLY_MASK if and only if PML is enabled
KVM: x86: hyper-v: Fix Hyper-V context null-ptr-deref
KVM: x86: remove misplaced comment on active_mmu_pages
KVM: Documentation: rectify rst markup in kvm_run->flags
Documentation: kvm: fix messy conversion from .txt to .rst
Commit 5ee759cda5 ("l2tp: use standard API for warning log messages")
changed a number of warnings about invalid packets in the receive path
so that they are always shown, instead of only when a special L2TP debug
flag is set. Even with rate limiting these warnings can easily cause
significant log spam - potentially triggered by a malicious party
sending invalid packets on purpose.
In addition these warnings were noticed by projects like Tunneldigger [1],
which uses L2TP for its data path, but implements its own control
protocol (which is sufficiently different from L2TP data packets that it
would always be passed up to userspace even with future extensions of
L2TP).
Some of the warnings were already redundant, as l2tp_stats has a counter
for these packets. This commit adds one additional counter for invalid
packets that are passed up to userspace. Packets with unknown session are
not counted as invalid, as there is nothing wrong with the format of
these packets.
With the additional counter, all of these messages are either redundant
or benign, so we reduce them to pr_debug_ratelimited().
[1] https://github.com/wlanslovenija/tunneldigger/issues/160
Fixes: 5ee759cda5 ("l2tp: use standard API for warning log messages")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apparently, <linux/netfilter/nfnetlink_cthelper.h> and
<linux/netfilter/nfnetlink_acct.h> could not be included into the same
compilation unit because of a cut-and-paste typo in the former header.
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Cc: <stable@vger.kernel.org> # v3.6
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=oc8u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
We currently hardcode these in mesa, but querying them from
the kernel makes more sense since there may be board specific
limitations that the kernel driver is better suited to
determining.
Userpace patches that use this interface:
https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_capshttps://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps
v2: reorder the codecs to better align with mesa
v3: add max_pixels_per_frame to handle the portrait case, squash in
memory leak fix
v4: drop extra break
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bpf_for_each_map_elem() helper is introduced which
iterates all map elements with a callback function. The
helper signature looks like
long bpf_for_each_map_elem(map, callback_fn, callback_ctx, flags)
and for each map element, the callback_fn will be called. For example,
like hashmap, the callback signature may look like
long callback_fn(map, key, val, callback_ctx)
There are two known use cases for this. One is from upstream ([1]) where
a for_each_map_elem helper may help implement a timeout mechanism
in a more generic way. Another is from our internal discussion
for a firewall use case where a map contains all the rules. The packet
data can be compared to all these rules to decide allow or deny
the packet.
For array maps, users can already use a bounded loop to traverse
elements. Using this helper can avoid using bounded loop. For other
type of maps (e.g., hash maps) where bounded loop is hard or
impossible to use, this helper provides a convenient way to
operate on all elements.
For callback_fn, besides map and map element, a callback_ctx,
allocated on caller stack, is also passed to the callback
function. This callback_ctx argument can provide additional
input and allow to write to caller stack for output.
If the callback_fn returns 0, the helper will iterate through next
element if available. If the callback_fn returns 1, the helper
will stop iterating and returns to the bpf program. Other return
values are not used for now.
Currently, this helper is only available with jit. It is possible
to make it work with interpreter with so effort but I leave it
as the future work.
[1]: https://lore.kernel.org/bpf/20210122205415.113822-1-xiyou.wangcong@gmail.com/
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210226204925.3884923-1-yhs@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf 2021-02-26
1) Fix for bpf atomic insns with src_reg=r0, from Brendan.
2) Fix use after free due to bpf_prog_clone, from Cong.
3) Drop imprecise verifier log message, from Dmitrii.
4) Remove incorrect blank line in bpf helper description, from Hangbin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: No need to drop the packet when there is no geneve opt
bpf: Remove blank line in bpf helper description comment
tools/resolve_btfids: Fix build error with older host toolchains
selftests/bpf: Fix a compiler warning in global func test
bpf: Drop imprecise log message
bpf: Clear percpu pointers in bpf_prog_clone_free()
bpf: Fix a warning message in mark_ptr_not_null_reg()
bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
====================
Link: https://lore.kernel.org/r/20210226193737.57004-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 34b2021cc6 ("bpf: Add BPF-helper for MTU checking") added an extra
blank line in bpf helper description. This will make bpf_helpers_doc.py stop
building bpf_helper_defs.h immediately after bpf_check_mtu(), which will
affect future added functions.
Fixes: 34b2021cc6 ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210223131457.1378978-1-liuhangbin@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Merge more updates from Andrew Morton:
"118 patches:
- The rest of MM.
Includes kfence - another runtime memory validator. Not as thorough
as KASAN, but it has unmeasurable overhead and is intended to be
usable in production builds.
- Everything else
Subsystems affected by this patch series: alpha, procfs, sysctl,
misc, core-kernel, MAINTAINERS, lib, bitops, checkpatch, init,
coredump, seq_file, gdb, ubsan, initramfs, and mm (thp, cma,
vmstat, memory-hotplug, mlock, rmap, zswap, zsmalloc, cleanups,
kfence, kasan2, and pagemap2)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
MIPS: make userspace mapping young by default
initramfs: panic with memory information
ubsan: remove overflow checks
kgdb: fix to kill breakpoints on initmem after boot
scripts/gdb: fix list_for_each
x86: fix seq_file iteration for pat/memtype.c
seq_file: document how per-entry resources are managed.
fs/coredump: use kmap_local_page()
init/Kconfig: fix a typo in CC_VERSION_TEXT help text
init: clean up early_param_on_off() macro
init/version.c: remove Version_<LINUX_VERSION_CODE> symbol
checkpatch: do not apply "initialise globals to 0" check to BPF progs
checkpatch: don't warn about colon termination in linker scripts
checkpatch: add kmalloc_array_node to unnecessary OOM message check
checkpatch: add warning for avoiding .L prefix symbols in assembly files
checkpatch: improve TYPECAST_INT_CONSTANT test message
checkpatch: prefer ftrace over function entry/exit printks
checkpatch: trivial style fixes
checkpatch: ignore warning designated initializers using NR_CPUS
checkpatch: improve blank line after declaration test
...
Drop the doubled word "for" in a comment. {firewire-cdev.h}
Drop the doubled word "in" in a comment. {input.h}
Drop the doubled word "a" in a comment. {mdev.h}
Drop the doubled word "the" in a comment. {ptrace.h}
Link: https://lkml.kernel.org/r/20210126232444.22861-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
new vdpa features to allow creation and deletion of new devices
virtio-blk support per-device queue depth
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmA3+oYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpyXgIAL71dM1GjVwnJC/hZHRPeRKBLUVzj7bAILaO
i4TKQj0rs5OjJPrbGJVrbTpiUXfef+D75lzKYmOnfk+f2UeYSR6XecnlWbLddI16
RcMHQW6lt/M5WiyQjt71VH+gqtKIJLHDt3Ek1C0g8BjbFEWnpElAqdd/AWkzg9B9
ibCVPQq9dk+A8ZtfZpFB7/ykykHY8ndNQS9RJQLtE8fLNifN3Cir+uUf+pFzjjbs
PvukiN7BNqHXOCeoMpMttEuYGNR29jgZHbEm1hdnSQ55NIYqLMuhoD8eO114/CBz
p4clSmzhVoSU0sfc3igcyCZoVtjRcebOAaep7OoaIBRlQ1MXht8=
=YFEf
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- new vdpa features to allow creation and deletion of new devices
- virtio-blk support per-device queue depth
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (31 commits)
virtio-input: add multi-touch support
virtio_mmio: fix one typo
vdpa/mlx5: fix param validation in mlx5_vdpa_get_config()
virtio_net: Fix fall-through warnings for Clang
virtio_input: Prevent EV_MSC/MSC_TIMESTAMP loop storm for MT.
virtio-blk: support per-device queue depth
virtio_vdpa: don't warn when fail to disable vq
virtio-pci: introduce modern device module
virito-pci-modern: rename map_capability() to vp_modern_map_capability()
virtio-pci-modern: introduce helper to get notification offset
virtio-pci-modern: introduce helper for getting queue nums
virtio-pci-modern: introduce helper for setting/geting queue size
virtio-pci-modern: introduce helper to set/get queue_enable
virtio-pci-modern: introduce vp_modern_queue_address()
virtio-pci-modern: introduce vp_modern_set_queue_vector()
virtio-pci-modern: introduce vp_modern_generation()
virtio-pci-modern: introduce helpers for setting and getting features
virtio-pci-modern: introduce helpers for setting and getting status
virtio-pci-modern: introduce helper to set config vector
virtio-pci-modern: introduce vp_modern_remove()
...
Merge misc updates from Andrew Morton:
"A few small subsystems and some of MM.
172 patches.
Subsystems affected by this patch series: hexagon, scripts, ntfs,
ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap,
memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan,
pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
mempolicy, oom-kill, hugetlbfs, and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits)
mm/migrate: remove unneeded semicolons
hugetlbfs: remove unneeded return value of hugetlb_vmtruncate()
hugetlbfs: fix some comment typos
hugetlbfs: correct some obsolete comments about inode i_mutex
hugetlbfs: make hugepage size conversion more readable
hugetlbfs: remove meaningless variable avoid_reserve
hugetlbfs: correct obsolete function name in hugetlbfs_read_iter()
hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs
hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr()
hugetlbfs: remove special hugetlbfs_set_page_dirty()
mm/hugetlb: change hugetlb_reserve_pages() to type bool
mm, oom: fix a comment in dump_task()
mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk()
numa balancing: migrate on fault among multiple bound nodes
mm, compaction: make fast_isolate_freepages() stay within zone
mm/compaction: fix misbehaviors of fast_find_migrateblock()
mm/compaction: correct deferral logic for proactive compaction
mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked
mm/compaction: remove rcu_read_lock during page compaction
z3fold: simplify the zhdr initialization code in init_z3fold_page()
...
Now, NUMA balancing can only optimize the page placement among the NUMA
nodes if the default memory policy is used. Because the memory policy
specified explicitly should take precedence. But this seems too strict in
some situations. For example, on a system with 4 NUMA nodes, if the
memory of an application is bound to the node 0 and 1, NUMA balancing can
potentially migrate the pages between the node 0 and 1 to reduce
cross-node accessing without breaking the explicit memory binding policy.
So in this patch, we add MPOL_F_NUMA_BALANCING mode flag to
set_mempolicy() when mode is MPOL_BIND. With the flag specified, NUMA
balancing will be enabled within the thread to optimize the page placement
within the constrains of the specified memory binding policy. With the
newly added flag, the NUMA balancing control mechanism becomes,
- sysctl knob numa_balancing can enable/disable the NUMA balancing
globally.
- even if sysctl numa_balancing is enabled, the NUMA balancing will be
disabled for the memory areas or applications with the explicit
memory policy by default.
- MPOL_F_NUMA_BALANCING can be used to enable the NUMA balancing for
the applications when specifying the explicit memory policy
(MPOL_BIND).
Various page placement optimization based on the NUMA balancing can be
done with these flags. As the first step, in this patch, if the memory of
the application is bound to multiple nodes (MPOL_BIND), and in the hint
page fault handler the accessing node are in the policy nodemask, the page
will be tried to be migrated to the accessing node to reduce the
cross-node accessing.
If the newly added MPOL_F_NUMA_BALANCING flag is specified by an
application on an old kernel version without its support, set_mempolicy()
will return -1 and errno will be set to EINVAL. The application can use
this behavior to run on both old and new kernel versions.
And if the MPOL_F_NUMA_BALANCING flag is specified for the mode other than
MPOL_BIND, set_mempolicy() will return -1 and errno will be set to EINVAL
as before. Because we don't support optimization based on the NUMA
balancing for these modes.
In the previous version of the patch, we tried to reuse MPOL_MF_LAZY for
mbind(). But that flag is tied to MPOL_MF_MOVE.*, so it seems not a good
API/ABI for the purpose of the patch.
And because it's not clear whether it's necessary to enable NUMA balancing
for a specific memory area inside an application, so we only add the flag
at the thread level (set_mempolicy()) instead of the memory area level
(mbind()). We can do that when it become necessary.
To test the patch, we run a test case as follows on a 4-node machine with
192 GB memory (48 GB per node).
1. Change pmbench memory accessing benchmark to call set_mempolicy()
to bind its memory to node 1 and 3 and enable NUMA balancing. Some
related code snippets are as follows,
#include <numaif.h>
#include <numa.h>
struct bitmask *bmp;
int ret;
bmp = numa_parse_nodestring("1,3");
ret = set_mempolicy(MPOL_BIND | MPOL_F_NUMA_BALANCING,
bmp->maskp, bmp->size + 1);
/* If MPOL_F_NUMA_BALANCING isn't supported, fall back to MPOL_BIND */
if (ret < 0 && errno == EINVAL)
ret = set_mempolicy(MPOL_BIND, bmp->maskp, bmp->size + 1);
if (ret < 0) {
perror("Failed to call set_mempolicy");
exit(-1);
}
2. Run a memory eater on node 3 to use 40 GB memory before running pmbench.
3. Run pmbench with 64 processes, the working-set size of each process
is 640 MB, so the total working-set size is 64 * 640 MB = 40 GB. The
CPU and the memory (as in step 1.) of all pmbench processes is bound
to node 1 and 3. So, after CPU usage is balanced, some pmbench
processes run on the CPUs of the node 3 will access the memory of
the node 1.
4. After the pmbench processes run for 100 seconds, kill the memory
eater. Now it's possible for some pmbench processes to migrate
their pages from node 1 to node 3 to reduce cross-node accessing.
Test results show that, with the patch, the pages can be migrated from
node 1 to node 3 after killing the memory eater, and the pmbench score
can increase about 17.5%.
Link: https://lkml.kernel.org/r/20210120061235.148637-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the large set of char/misc/whatever driver subsystem updates for
5.12-rc1. Over time it seems like this tree is collecting more and more
tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86
maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only reported
issue being a merge conflict in include/linux/mod_devicetable.h that you
will hit in your tree due to the dfl_device_id addition from the fpga
subsystem in here. The resolution should be simple.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw
tNW6n1JhXLYl9f5JdhvS
=MOHs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
Introduce an initial driver for CXL 2.0 Type-3 Memory Devices. CXL is
Compute Express Link which released the 2.0 specification in November.
The Linux relevant changes in CXL 2.0 are support for an OS to
dynamically assign address space to memory devices, support for
switches, persistent memory, and hotplug. A Type-3 Memory Device is a
PCI enumerated device presenting the CXL Memory Device Class Code and
implementing the CXL.mem protocol. CXL.mem allows device to advertise
CPU and I/O coherent memory to the system, i.e. typical "System RAM" and
"Persistent Memory" in Linux /proc/iomem terms.
In addition to the CXL.mem fast path there is an administrative command
hardware mailbox interface for maintenance and provisioning. It is this
command interface that is the focus of the initial driver. With this
driver a CXL device that is mapped by the BIOS can be administered by
Linux. Linux support for CXL PMEM and dynamic CXL address space
management are to be implemented post v5.12.
4cdadfd5e0 cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
8adaf747c9 cxl/mem: Find device capabilities
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
b39cb1052a cxl/mem: Register CXL memX devices
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
13237183c7 cxl/mem: Add a "RAW" send command
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
472b1ce6e9 cxl/mem: Enable commands via CEL
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
57ee605b97 cxl/mem: Add set of informational commands
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-----BEGIN PGP SIGNATURE-----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=3SAQ
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull initial support for CXL (Compute Express Link) from Dan Williams:
"Introduce an initial driver for CXL 2.0 Type-3 Memory Devices.
CXL is Compute Express Link which released the 2.0 specification in
November. The Linux relevant changes in CXL 2.0 are support for an OS
to dynamically assign address space to memory devices, support for
switches, persistent memory, and hotplug.
A Type-3 Memory Device is a PCI enumerated device presenting the CXL
Memory Device Class Code and implementing the CXL.mem protocol.
CXL.mem allows device to advertise CPU and I/O coherent memory to the
system, i.e. typical "System RAM" and "Persistent Memory" in Linux
/proc/iomem terms.
In addition to the CXL.mem fast path there is an administrative
command hardware mailbox interface for maintenance and provisioning.
It is this command interface that is the focus of the initial driver.
With this driver a CXL device that is mapped by the BIOS can be
administered by Linux.
Linux support for CXL PMEM and dynamic CXL address space management
are to be implemented post v5.12"
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
4cdadfd5e0 ("cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints")
13237183c7 ("cxl/mem: Add a "RAW" send command")
472b1ce6e9 ("cxl/mem: Enable commands via CEL")
57ee605b97 ("cxl/mem: Add set of informational commands")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
8adaf747c9 ("cxl/mem: Find device capabilities")
b39cb1052a ("cxl/mem: Register CXL memX devices")
* tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/mem: Fix potential memory leak
cxl/mem: Return -EFAULT if copy_to_user() fails
MAINTAINERS: Add maintainers of the CXL driver
cxl/mem: Add set of informational commands
cxl/mem: Enable commands via CEL
cxl/mem: Add a "RAW" send command
cxl/mem: Add basic IOCTL interface
cxl/mem: Register CXL memX devices
cxl/mem: Find device capabilities
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
Commit 34b2021cc6 ("bpf: Add BPF-helper for MTU checking") added an extra
blank line in bpf helper description. This will make bpf_helpers_doc.py stop
building bpf_helper_defs.h immediately after bpf_check_mtu(), which will
affect future added functions.
Fixes: 34b2021cc6 ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210223131457.1378978-1-liuhangbin@gmail.com
A few reasons to do this:
- The naming of the manager and worker have changed. That's a user visible
change, so makes sense to flag it.
- Opening certain files that use ->signal (like /proc/self or /dev/tty)
now works, and the flag tells the application upfront that this is the
case.
- Related to the above, using signalfd will now work as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Log space and revoke accounting rework to fix some failed asserts.
* Local resource group glock sharing for better local performance.
* Add support for version 1802 filesystems: trusted xattr support and
'-o rgrplvb' mounts by default.
* Actually synchronize on the inode glock's FREEING bit during withdraw
("gfs2: fix glock confusion in function signal_our_withdraw").
* Fix parallel recovery of multiple journals ("gfs2: keep bios separate
for each journal").
* Various other bug fixes.
-----BEGIN PGP SIGNATURE-----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=45VG
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Log space and revoke accounting rework to fix some failed asserts.
- Local resource group glock sharing for better local performance.
- Add support for version 1802 filesystems: trusted xattr support and
'-o rgrplvb' mounts by default.
- Actually synchronize on the inode glock's FREEING bit during withdraw
("gfs2: fix glock confusion in function signal_our_withdraw").
- Fix parallel recovery of multiple journals ("gfs2: keep bios separate
for each journal").
- Various other bug fixes.
* tag 'gfs2-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (49 commits)
gfs2: Don't get stuck with I/O plugged in gfs2_ail1_flush
gfs2: Per-revoke accounting in transactions
gfs2: Rework the log space allocation logic
gfs2: Minor calc_reserved cleanup
gfs2: Use resource group glock sharing
gfs2: Allow node-wide exclusive glock sharing
gfs2: Add local resource group locking
gfs2: Add per-reservation reserved block accounting
gfs2: Rename rs_{free -> requested} and rd_{reserved -> requested}
gfs2: Check for active reservation in gfs2_release
gfs2: Don't search for unreserved space twice
gfs2: Only pass reservation down to gfs2_rbm_find
gfs2: Also reflect single-block allocations in rgd->rd_extfail_pt
gfs2: Recursive gfs2_quota_hold in gfs2_iomap_end
gfs2: Add trusted xattr support
gfs2: Enable rgrplvb for sb_fs_format 1802
gfs2: Don't skip dlm unlock if glock has an lvb
gfs2: Lock imbalance on error path in gfs2_recover_one
gfs2: Move function gfs2_ail_empty_tr
gfs2: Get rid of current_tail()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
Enable user to query vdpa device information.
$ vdpa dev add mgmtdev vdpasim_net name foo2
Show the newly created vdpa device by its name:
$ vdpa dev show foo2
foo2: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 2 max_vq_size 256
$ vdpa dev show foo2 -jp
{
"dev": {
"foo2": {
"type": "network",
"mgmtdev": "vdpasim_net",
"vendor_id": 0,
"max_vqs": 2,
"max_vq_size": 256
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-6-parav@nvidia.com
Including a memory leak fix:
Link: https://lore.kernel.org/r/20210217060614.59561-1-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the ability to add and delete a vdpa device.
Examples:
Create a vdpa device of type network named "foo2" from
the management device vdpasim:
$ vdpa dev add mgmtdev vdpasim_net name foo2
Delete the vdpa device after its use:
$ vdpa dev del foo2
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To add one or more VDPA devices, define a management device which
allows adding or removing vdpa device. A management device defines
set of callbacks to manage vdpa devices.
To begin with, it defines add and remove callbacks through which a user
defined vdpa device can be added or removed.
A unique management device is identified by its unique handle identified
by management device name and optionally the bus name.
Hence, introduce routine through which driver can register a
management device and its callback operations for adding and remove
a vdpa device.
Introduce vdpa netlink socket family so that user can query management
device and its attributes.
Example of show vdpa management device which allows creating vdpa device of
networking class (device id = 0x1) of virtio specification 1.1
section 5.1.1.
$ vdpa mgmtdev show
vdpasim_net:
supported_classes:
net
Example of showing vdpa management device in JSON format.
$ vdpa mgmtdev show -jp
{
"show": {
"vdpasim_net": {
"supported_classes": [ "net" ]
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Including a bugfix:
vpda: correctly size vdpa_nl_policy
We need to ensure last entry of vdpa_nl_policy[]
is zero, otherwise out-of-bounds access is hurting us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Eli Cohen <elic@nvidia.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa
- Significant rework in rxe to get it ready to have XRC support added
- Several rts bug fixes
- Big series to get to 'make W=1' cleanness, primarily updating kdocs
- Support for creating a RDMA MR from a DMABUF fd to allow PCI peer to
peer transfers to GPU VRAM
- Device disassociation now works properly with umad
- Work to support more than 255 ports on a RDMA device
- Further support for the new HNS HIP09 hardware
- Coding style cleanups: comma to semicolon, unneded semicolon/blank
lines, remove 'h' printk format, don't check for NULL before kfree,
use true/false for bool.
-----BEGIN PGP SIGNATURE-----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=Z4cZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, if not for Lee's 70 patches cleaning the
kdocs it would be well below typical for patch count.
Most of the interesting work here was in the HNS and rxe drivers which
got fairly major internal changes.
Summary:
- Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa
- Significant rework in rxe to get it ready to have XRC support added
- Several rts bug fixes
- Big series to get to 'make W=1' cleanness, primarily updating kdocs
- Support for creating a RDMA MR from a DMABUF fd to allow PCI peer
to peer transfers to GPU VRAM
- Device disassociation now works properly with umad
- Work to support more than 255 ports on a RDMA device
- Further support for the new HNS HIP09 hardware
- Coding style cleanups: comma to semicolon, unneded semicolon/blank
lines, remove 'h' printk format, don't check for NULL before kfree,
use true/false for bool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (205 commits)
RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()
RDMA/srp: Fix support for unpopulated and unbalanced NUMA nodes
RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
RDMA/mlx5: Allow CQ creation without attached EQs
RDMA/rtrs-srv-sysfs: fix missing put_device
RDMA/rtrs-srv: fix memory leak by missing kobject free
RDMA/rtrs: Only allow addition of path to an already established session
RDMA/rtrs-srv: Fix stack-out-of-bounds
RDMA/rxe: Remove unused pkt->offset
RDMA/ucma: Fix use-after-free bug in ucma_create_uevent
RDMA/core: Fix kernel doc warnings for ib_port_immutable_read()
RDMA/qedr: Use true and false for bool variable
RDMA/hns: Adjust definition of FRMR fields
RDMA/hns: Refactor process of posting CMDQ
RDMA/hns: Adjust fields and variables about CMDQ tail/head
RDMA/hns: Remove redundant operations on CMDQ
RDMA/hns: Fixes missing error code of CMDQ
RDMA/hns: Remove unused member and variable of CMDQ
RDMA/ipoib: Remove racy Subnet Manager sendonly join checks
RDMA/mlx5: Support 400Gbps IB rate in mlx5 driver
...
internal_hash and journal_mac capabilities.
- Various DM writecache fixes to address performance, fix table output
to match what was provided at table creation, fix writing beyond end
of device when shrinking underlying data device, and a couple other
small cleanups.
- Add DM crypt support for using trusted keys.
- Fix deadlock when swapping to DM crypt device by throttling number
of in-flight REQ_SWAP bios. Implemented in DM core so that other
bio-based targets can opt-in by setting ti->limit_swap_bios.
- Fix various inverted logic bugs in the .iterate_devices callout
functions that are used to assess if specific feature or capability
is supported across all devices being combined/stacked by DM.
- Fix DM era target bugs that exposed users to lost writes or memory
leaks.
- Add DM core support for passing through inline crypto support of
underlying devices. Includes block/keyslot-manager changes that
enable extending this support to DM.
- Various small fixes and cleanups (spelling fixes, front padding
calculation cleanup, cleanup conditional zoned support in targets,
etc).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmAqxggTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWjVOCACkZKleQhsCEYHNtjZ40Du+4PPBvESA
O+ScdUCeik4YUXvQtlFRPcYxxOH0zL0CUivLnNlsKzGTTgulw5azgFNuUTzIhH5y
a86Q+DReigPegzVCCOenInU18pYa03rLtYOAb6SK49IqVeMWMFSJVBv73HWS7OFV
slMlsQCN46YgbviYsGUXk5+uKMET4ijJZVW+8zSYg0GsWLHdgQtBkEoojO1n9H2B
jio2Nvhto0bJ4dV482lmd3G+LABmaBbLs0Xx/a7iHVigkIYZz4BHwDYNz/EQnNEi
dYlOrSL9a6ur+DFR6vxShzG40LbK7KVr8jHiXyKv2WZA7FMK0l4fyEFV
=E+n3
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM integrity's HMAC support to provide enhanced security of
internal_hash and journal_mac capabilities.
- Various DM writecache fixes to address performance, fix table output
to match what was provided at table creation, fix writing beyond end
of device when shrinking underlying data device, and a couple other
small cleanups.
- Add DM crypt support for using trusted keys.
- Fix deadlock when swapping to DM crypt device by throttling number of
in-flight REQ_SWAP bios. Implemented in DM core so that other
bio-based targets can opt-in by setting ti->limit_swap_bios.
- Fix various inverted logic bugs in the .iterate_devices callout
functions that are used to assess if specific feature or capability
is supported across all devices being combined/stacked by DM.
- Fix DM era target bugs that exposed users to lost writes or memory
leaks.
- Add DM core support for passing through inline crypto support of
underlying devices. Includes block/keyslot-manager changes that
enable extending this support to DM.
- Various small fixes and cleanups (spelling fixes, front padding
calculation cleanup, cleanup conditional zoned support in targets,
etc).
* tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (31 commits)
dm: fix deadlock when swapping to encrypted device
dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED
dm: set DM_TARGET_PASSES_CRYPTO feature for some targets
dm: support key eviction from keyslot managers of underlying devices
dm: add support for passing through inline crypto support
block/keyslot-manager: Introduce functions for device mapper support
block/keyslot-manager: Introduce passthrough keyslot manager
dm era: only resize metadata in preresume
dm era: Use correct value size in equality function of writeset tree
dm era: Fix bitset memory leaks
dm era: Verify the data block size hasn't changed
dm era: Reinitialize bitset cache before digesting a new writeset
dm era: Update in-core bitset after committing the metadata
dm era: Recover committed writeset after crash
dm writecache: use bdev_nr_sectors() instead of open-coded equivalent
dm writecache: fix writing beyond end of underlying device when shrinking
dm table: remove needless request_queue NULL pointer checks
dm table: fix zoned iterate_devices based device capability checks
dm table: fix DAX iterate_devices based device capability checks
dm table: fix iterate_devices based device capability checks
...
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to perform
the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that userspace
programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx as well
as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers from
intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all over the
place
-----BEGIN PGP SIGNATURE-----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=OZtR
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"It's been a relatively calm release cycle and we're actually removing
more code than we're adding.
Summary:
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to
perform the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that
userspace programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx
as well as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers
from intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all
over the place"
* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
gpio: pcf857x: Fix missing first interrupt
gpio: ep93xx: refactor base IRQ number
gpio: ep93xx: refactor ep93xx_gpio_add_bank
gpio: ep93xx: Fix typo s/hierarchial/hierarchical
gpio: ep93xx: drop to_irq binding
gpio: ep93xx: Fix wrong irq numbers in port F
gpio: uapi: use the preferred SPDX license identifier
gpio: gpio-xilinx: Add check if width exceeds 32
gpio: gpio-xilinx: Add support for suspend and resume
gpio: gpio-xilinx: Add interrupt support
gpio: gpio-xilinx: Reduce spinlock array to array
gpio: gpio-xilinx: Simplify with dev_err_probe()
gpio: msic: Drop driver from Makefile
gpio: wcove: Split out to_ireg() helper and deduplicate the code
gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
gpio: wcove: Get rid of error prone casting in IRQ handler
gpio: intel-mid: Remove driver for deprecated platform
gpio: msic: Remove driver for deprecated platform
gpio: aggregator: Remove trailing comma in terminator entries
gpio: aggregator: Use compound literal from the header
...
The main focus of this release from a framework point of view has been
spi-mem where we've acquired support for a few new hardware features
which enable better performance on suitable hardware. Otherwise mostly
thanks to Arnd's cleanup efforts on old platforms we've removed several
obsolete drivers which just about balance out the newer drivers we've
added this cycle.
- Allow drivers to flag if they are unidirectional.
- Support for DTR mode and hardware acceleration of dummy cycles in spi-mem.
- Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
QuadSPI, Realtek RTL838x and RTL839x.
- Removal of obsolute EFM32, Txx9 and SIRF Prima and Atlas drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAq3M0ACgkQJNaLcl1U
h9Aq3gf6AuboDwFguKZAmXp27zjYsv5o5KtPyycTltIIfjGuA58+fN2zQT+puoGI
wzafjk9R73Foa67YKUwClaBGZNZbYOkB2iOk9a+/sku6k3jO14moybpMuL32dCVe
lutKd9D4n8/J5UHX3SHKHAZ9r2vp28rlaZa4wd79Ww5r+BLajUcrkjtr4GVT5k1k
WzzC0nUjE/zg1oV+PlakMolwK+iBCQYTT7S4r/OQAABQIkXXdtwmGvFUUXpGVF19
GUs52XI8QzK5504Xl+F7NF1+2zHovO11PTHnd+rAe6AfA/NGggtk6O1Y9R4tQHF9
TN6PHukNxUdTFfe6RTbSzPagpFydvQ==
=/4Ve
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The main focus of this release from a framework point of view has been
spi-mem where we've acquired support for a few new hardware features
which enable better performance on suitable hardware.
Otherwise mostly thanks to Arnd's cleanup efforts on old platforms
we've removed several obsolete drivers which just about balance out
the newer drivers we've added this cycle.
Summary:
- Allow drivers to flag if they are unidirectional.
- Support for DTR mode and hardware acceleration of dummy cycles in
spi-mem.
- Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
QuadSPI, Realtek RTL838x and RTL839x.
- Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers"
* tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits)
spi: Skip zero-length transfers in spi_transfer_one_message()
spi: dw: Avoid stack content exposure
spi: cadence-quadspi: Use spi_mem_dtr_supports_op()
spi: spi-mem: add spi_mem_dtr_supports_op()
spi: atmel-quadspi: Disable the QSPI IP at suspend()
spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint
spi: pxa2xx: Fix the controller numbering for Wildcat Point
spi: Change provied to provided in the file spi.h
spi: mediatek: add set_cs_timing support
spi: support CS timing for HW & SW mode
spi: add power control when set_cs_timing
spi: stm32: make spurious and overrun interrupts visible
spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
spi: stm32: defer probe for reset
spi: stm32: driver uses reset controller only at init
spi: stm32h7: ensure message are smaller than max size
spi: stm32: use bitfield macros
spi: stm32: do not mandate cs_gpio
spi: stm32: properly handle 0 byte transfer
spi: clps711xx: remove redundant white-space
...
Pull i2c updates from Wolfram Sang:
- mostly driver updates. Bigger ones for mlxcpld and iproc. But most of
them are all over the place.
- removal of the efm32, sirf, u300, and zte zx bus drivers because of
platform removal. So, we have a pleasant diffstat this time.
- first set of cleanups in the I2C core as preparation to increase
maximum length of SMBus transfers to 255 (as specified in the new
standard). Better documentation of struct i2c_msg and its flags stand
out here.
- the testunit can now respond to SMBus block process calls which is
the testcase when implementing the above new maximum length.
* 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits)
i2c: remove redundant error print in stm32f7_i2c_probe
i2c: testunit: add support for block process calls
i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ
dt-bindings: eeprom: at24: Document ROHM BR24G01
i2c: i801: Add support for Intel Alder Lake PCH-P
i2c: mv64xxx: Fix check for missing clock after adding RPM
i2c: mux: mlxcpld: Add callback to notify mux creation completion
i2c: mux: mlxcpld: Extend supported mux number
i2c: mux: mlxcpld: Extend driver to support word address space devices
i2c: mux: mlxcpld: Get rid of adapter numbers enforcement
i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support
i2c: mux: mlxcpld: Convert driver to platform driver
i2c: imx: Synthesize end of transaction events without idle interrupts
i2c: i2c-qcom-geni: Add shutdown callback for i2c
i2c: mv64xxx: Add runtime PM support
i2c: amd-mp2: Remove unused macro
i2c: amd-mp2: convert to PCI logging functions
i2c: mux: mlxcpld: Move header file out of x86 realm
platform/x86: mlxcpld: Update module license
i2c: mux: mlxcpld: Update module license
...
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support
- Base / userspace API parts merged from Rafael's acpi-platform branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through merging
of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc. other fixes / new hw support / quirks
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: Fix possible deadlock in platform_profile_remove()
- platform-profile: Introduce object pointers to callbacks
- platform-profile: Drop const qualifier for cur_profile
- platform: Add platform profile support
Documentation:
- Add documentation for new platform_profile sysfs attribute
Documentation/ABI:
- sysfs-platform-ideapad-laptop: conservation_mode attribute
- sysfs-platform-ideapad-laptop: update device attribute paths
Kconfig:
- add missing selects for ideapad-laptop
MAINTAINERS:
- update email address for Henrique de Moraes Holschuh
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans
Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next:
- Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next
Move all dell drivers to their own subdirectory:
- Move all dell drivers to their own subdirectory
Platform:
- OLPC: Constify static struct regulator_ops
- OLPC: Specify the enable time
- OLPC: Remove dcon_rdev from olpc_ec_priv
- OLPC: Fix probe error handling
Revert "platform/x86:
- ideapad-laptop: Switch touchpad attribute to be RO"
acer-wmi:
- Don't use ACPI_EXCEPTION()
amd-pmc:
- put device on error paths
- Fix CONFIG_DEBUG_FS check
dell-wmi-sysman:
- fix a NULL pointer dereference
docs:
- driver-api: Add Surface Aggregator subsystem documentation
drm/gma500:
- Get rid of duplicate NULL checks
- Convert to use new SCU IPC API
gpio:
- msic: Remove driver for deprecated platform
- intel-mid: Remove driver for deprecated platform
hp-wmi:
- Disable tablet-mode reporting by default
- Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
i2c-multi-instantiate:
- Don't create platform device for INT3515 ACPI nodes
ideapad-laptop:
- add "always on USB charging" control support
- add keyboard backlight control support
- send notification about touchpad state change to sysfs
- fix checkpatch warnings, more consistent style
- change 'cfg' debugfs file format
- change 'status' debugfs file format
- check for touchpad support in _CFG
- check for Fn-lock support in HALS
- rework is_visible() logic
- rework and create new ACPI helpers
- group and separate (un)related constants into enums
- misc. device attribute changes
- always propagate error codes from device attributes' show() callback
- convert ACPI helpers to return -EIO in case of failure
- use dev_{err,warn} or appropriate variant to display log messages
- use msecs_to_jiffies() helper instead of hand-crafted formula
- use for_each_set_bit() helper to simplify event processing
- use kobj_to_dev()
- use device_{add,remove}_group
- use sysfs_emit()
- add missing call to submodule destructor
- sort includes lexicographically
- use appropriately typed variable to store the return value of ACPI methods
- remove unnecessary NULL checks
- remove unnecessary dev_set_drvdata() call
- DYTC Platform profile support
- Disable touchpad_switch for ELAN0634
intel-vbtn:
- Eval VBDL after registering our notifier
- Add alternative method to enable switches
- Create 2 separate input-devs for buttons and switches
- Rework wakeup handling in notify_handler()
- Drop HP Stream x360 Convertible PC 11 from allow-list
- Support for tablet mode on Dell Inspiron 7352
intel_mid_powerbtn:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_mid_thermal:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_pmt:
- Make INTEL_PMT_CLASS non-user-selectable
intel_pmt_crashlog:
- Add dependency on MFD_INTEL_PMT
intel_pmt_telemetry:
- Add dependency on MFD_INTEL_PMT
intel_scu_ipc:
- Increase virtual timeout from 3 to 5 seconds
intel_scu_wdt:
- Drop mistakenly added const
- Get rid of custom x86 model comparison
- Drop SCU notification
- Move driver from arch/x86
msi-wmi:
- Fix variable 'status' set but not used compiler warning
platform/surface:
- aggregator: Fix access of unaligned value
- Add Surface Hot-Plug driver
- surface3-wmi: Fix variable 'status' set but not used compiler warning
- aggregator: Fix braces in if condition with unlikely() macro
- aggregator: Fix kernel-doc references
- aggregator: fix a kernel-doc markup
- aggregator_cdev: Add comments regarding unchecked allocation size
- aggregator_cdev: Fix access of uninitialized variables
- fix potential integer overflow on shift of a int
- Add Surface ACPI Notify driver
- Add Surface Aggregator user-space interface
- aggregator: Add dedicated bus and device type
- aggregator: Add error injection capabilities
- aggregator: Add trace points
- aggregator: Add event item allocation caching
- aggregator: Add control packet allocation caching
- Add Surface Aggregator subsystem
- SURFACE_PLATFORMS should depend on ACPI
- surface_gpe: Fix non-PM_SLEEP build warnings
platform/x86/intel-uncore-freq:
- Add Sapphire Rapids server support
rtc:
- mrst: Remove driver for deprecated platform
sony-laptop:
- Remove unneeded semicolon
thinkpad_acpi:
- Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
- Fix 'warning: no previous prototype for' warnings
- Add platform profile support
- fixed warning and incorporated review comments
- rectify length of title underline
- Don't register keyboard_lang unnecessarily
- set keyboard language
- Add P53/73 firmware to fan_quirk_table for dual fan control
- correct palmsensor error checking
tools/power/x86/intel-speed-select:
- Update version to 1.8
- Add new command to get/set TRL
- Add new command turbo-mode
- Set higher of cpuinfo_max_freq or base_frequency
- Set scaling_max_freq to base_frequency
touchscreen_dmi:
- Add info for the Jumper EZpad 7 tablet
- Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
watchdog:
- intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
- intel_scu_watchdog: Remove driver for deprecated platform
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAqZ5cUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zmuwf/XLoZzs6oW7Ps9DhkyU5lk7D79rti
DY4AabVnWZhJ+Yl5+qMCTjC0R0nJYoq9PCDU5q20HHSFq7PXV0fPEVo7ZOp8tPng
wdzb2glbtGjSWksjj3c8eB/jjPP0tpsWptH+9jlTv9yXwQNVh/rPVltmD+z8y69U
qNzySltQMtoKmQKNbktUeHA12jBldnH+QlkL8KUp5ZEVDd7gukkmAovpzEcnwk5U
lrza7I52c9Ggu1pD2OCX7an9tk6N7mQ6Rk2/c6GzRsOYa6SC5Aj7fi2bs0LRdGGx
Kz/gtKS3dRIreEs4LGmL8byVi7a/YvCQoTfO+MxKq/btedBwxO2edDDsRg==
=B+Fz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
-----BEGIN PGP SIGNATURE-----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=/wKL
-----END PGP SIGNATURE-----
Merge tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some core fixes in VB2 mem2mem support
- some improvements and cleanups in V4L2 async kAPI
- newer controls in V4L2 API for H-264 and HEVC codecs
- allegro-dvt driver was promoted from staging
- new i2c sendor drivers: imx334, ov5648, ov8865
- new automobile camera module: rdacm21
- ipu3 cio2 driver started gained support for some ACPI BIOSes
- new ATSC frontend: MaxLinear mxl692 VSB tuner/demod
- the SMIA/CCS driver gained more support for CSS standard
- several driver fixes, updates and improvements
* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
media: v4l: async: Fix kerneldoc documentation for async functions
media: i2c: max9271: Add MODULE_* macros
media: i2c: Kconfig: Make MAX9271 a module
media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
media: i2c: Add imx334 camera sensor driver
media: dt-bindings: media: Add bindings for imx334
media: ov8856: Configure sensor for GRBG Bayer for all modes
media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
media: ov5675: fix vflip/hflip control
media: ipu3-cio2: Build bridge only if ACPI is enabled
media: Remove the legacy v4l2-clk API
media: ov6650: Use the generic clock framework
media: mt9m111: Use the generic clock framework
media: ov9640: Use the generic clock framework
media: pxa_camera: Drop the v4l2-clk clock register
media: mach-pxa: Register the camera sensor fixed-rate clock
media: i2c: imx258: get clock from device properties and enable it via runtime PM
media: i2c: imx258: simplify getting state container
media: i2c: imx258: add support for binding via device tree
media: dt-bindings: media: imx258: add bindings for IMX258 sensor
...
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU. Instead of the complex
"fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an
rwlock so that page faults are concurrent, but the code that can run
against page faults is limited. Right now only page faults take the
lock for reading; in the future this will be extended to some
cases of page table destruction. I hope to switch the default MMU
around 5.12-rc3 (some testing was delayed due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmApSRgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOc7wf9FnlinKoTFaSk7oeuuhF/CoCVwSFs
Z9+A2sNI99tWHQxFR6dyDkEFeQoXnqSxfLHtUVIdH/JnTg0FkEvFz3NK+0PzY1PF
PnGNbSoyhP58mSBG4gbBAxdF3ZJZMB8GBgYPeR62PvMX2dYbcHqVBNhlf6W4MQK4
5mAUuAnbf19O5N267sND+sIg3wwJYwOZpRZB7PlwvfKAGKf18gdBz5dQ/6Ej+apf
P7GODZITjqM5Iho7SDm/sYJlZprFZT81KqffwJQHWFMEcxFgwzrnYPx7J3gFwRTR
eeh9E61eCBDyCTPpHROLuNTVBqrAioCqXLdKOtO5gKvZI3zmomvAsZ8uXQ==
=uFZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
Pull parisc updates from Helge Deller:
- Optimize parisc page table locks by using the existing
page_table_lock
- Export argv0-preserve flag in binfmt_misc for usage in qemu-user
- Fix interrupt table (IVT) checksum so firmware will call crash
handler (HPMC)
- Increase IRQ stack to 64kb on 64-bit kernel
- Switch to common devmem_is_allowed() implementation
- Minor fix to get_whan()
* 'parisc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
binfmt_misc: pass binfmt_misc flags to the interpreter
parisc: Optimize per-pagetable spinlocks
parisc: Replace test_ti_thread_flag() with test_tsk_thread_flag()
parisc: Bump 64-bit IRQ stack size to 64 KB
parisc: Fix IVT checksum calculation wrt HPMC
parisc: Use the generic devmem_is_allowed()
parisc: Drop out of get_whan() if task is running again
- Add CPU-PMU support for Intel Sapphire Rapids CPUs
- Extend the perf ABI with PERF_SAMPLE_WEIGHT_STRUCT, to offer two-parameter
sampling event feedback. Not used yet, but is intended for Golden Cove
CPU-PMU, which can provide both the instruction latency and the cache
latency information for memory profiling events.
- Remove experimental, default-disabled perfmon-v4 counter_freezing support
that could only be enabled via a boot option. The hardware is hopelessly
broken, we'd like to make sure nobody starts relying on this, as it would
only end in tears.
- Fix energy/power events on Intel SPR platforms
- Simplify the uprobes resume_execution() logic
- Misc smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BCcg
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
- Add CPU-PMU support for Intel Sapphire Rapids CPUs
- Extend the perf ABI with PERF_SAMPLE_WEIGHT_STRUCT, to offer
two-parameter sampling event feedback. Not used yet, but is intended
for Golden Cove CPU-PMU, which can provide both the instruction
latency and the cache latency information for memory profiling
events.
- Remove experimental, default-disabled perfmon-v4 counter_freezing
support that could only be enabled via a boot option. The hardware is
hopelessly broken, we'd like to make sure nobody starts relying on
this, as it would only end in tears.
- Fix energy/power events on Intel SPR platforms
- Simplify the uprobes resume_execution() logic
- Misc smaller fixes.
* tag 'perf-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix psys-energy event on Intel SPR platform
perf/x86/rapl: Only check lower 32bits for RAPL energy counters
perf/x86/rapl: Add msr mask support
perf/x86/kvm: Add Cascade Lake Xeon steppings to isolation_ucodes[]
perf/x86/intel: Support CPUID 10.ECX to disable fixed counters
perf/x86/intel: Add perf core PMU support for Sapphire Rapids
perf/x86/intel: Filter unsupported Topdown metrics event
perf/x86/intel: Factor out intel_update_topdown_event()
perf/core: Add PERF_SAMPLE_WEIGHT_STRUCT
perf/intel: Remove Perfmon-v4 counter_freezing support
x86/perf: Use static_call for x86_pmu.guest_get_msrs
perf/x86/intel/uncore: With > 8 nodes, get pci bus die id from NUMA info
perf/x86/intel/uncore: Store the logical die id instead of the physical die id.
x86/kprobes: Do not decode opcode in resume_execution()
-----BEGIN PGP SIGNATURE-----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=8MX/
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/io_uring-2021-02-17' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Highlights from this cycles are things like request recycling and
task_work optimizations, which net us anywhere from 10-20% of speedups
on workloads that mostly are inline.
This work was originally done to put io_uring under memcg, which adds
considerable overhead. But it's a really nice win as well. Also worth
highlighting is the LOOKUP_CACHED work in the VFS, and using it in
io_uring. Greatly speeds up the fast path for file opens.
Summary:
- Put io_uring under memcg protection. We accounted just the rings
themselves under rlimit memlock before, now we account everything.
- Request cache recycling, persistent across invocations (Pavel, me)
- First part of a cleanup/improvement to buffer registration (Bijan)
- SQPOLL fixes (Hao)
- File registration NULL pointer fixup (Dan)
- LOOKUP_CACHED support for io_uring
- Disable /proc/thread-self/ for io_uring, like we do for /proc/self
- Add Pavel to the io_uring MAINTAINERS entry
- Tons of code cleanups and optimizations (Pavel)
- Support for skip entries in file registration (Noah)"
* tag 'for-5.12/io_uring-2021-02-17' of git://git.kernel.dk/linux-block: (103 commits)
io_uring: tctx->task_lock should be IRQ safe
proc: don't allow async path resolution of /proc/thread-self components
io_uring: kill cached requests from exiting task closing the ring
io_uring: add helper to free all request caches
io_uring: allow task match to be passed to io_req_cache_free()
io-wq: clear out worker ->fs and ->files
io_uring: optimise io_init_req() flags setting
io_uring: clean io_req_find_next() fast check
io_uring: don't check PF_EXITING from syscall
io_uring: don't split out consume out of SQE get
io_uring: save ctx put/get for task_work submit
io_uring: don't duplicate io_req_task_queue()
io_uring: optimise SQPOLL mm/files grabbing
io_uring: optimise out unlikely link queue
io_uring: take compl state from submit state
io_uring: inline io_complete_rw_common()
io_uring: move res check out of io_rw_reissue()
io_uring: simplify iopoll reissuing
io_uring: clean up io_req_free_batch_finish()
io_uring: move submit side state closer in the ring
...
Add an ioctl which allows reading fs-verity metadata from a file.
This is useful when a file with fs-verity enabled needs to be served
somewhere, and the other end wants to do its own fs-verity compatible
verification of the file. See the commit messages for details.
This new ioctl has been tested using new xfstests I've written for it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYCv/2hQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK6/7AQDRmmnV+G34yGPCWfu8tyjdYvWPyak2
IA/I+eM6S/F+4QEAkbX6rOwYVhLHN9KSOYyNhJiBchm6xq83J+R8BYh/Kw0=
=FPNK
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Add an ioctl which allows reading fs-verity metadata from a file.
This is useful when a file with fs-verity enabled needs to be served
somewhere, and the other end wants to do its own fs-verity compatible
verification of the file. See the commit messages for details.
This new ioctl has been tested using new xfstests I've written for it"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: support reading signature with ioctl
fs-verity: support reading descriptor with ioctl
fs-verity: support reading Merkle tree with ioctl
fs-verity: add FS_IOC_READ_VERITY_METADATA ioctl
fs-verity: don't pass whole descriptor to fsverity_verify_signature()
fs-verity: factor out fsverity_get_descriptor()
- Update NFSv2 and NFSv3 XDR decoding functions
- Further improve support for re-exporting NFS mounts
- Convert NFSD stats to per-CPU counters
- Add batch Receive posting to the server's RPC/RDMA transport
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmAYVsAACgkQM2qzM29m
f5f1Lg/+IBC7Bhnnc8jNr4nv4IntCwwKdx2VzSzQszbN/kkhLZK89u36nZyqp0RB
Vg3olyS5DseEisMMx0rI0KkHBz7pz+kXVdOGvve8fHBZvewnJ/FpxNZPChG4aMDc
mfjHLvDHO0/GoUqSftrBrjSEJ2jHoNdDcmvzgdAlugTuLOjGX3HhmKa3ZYVTNgFn
kDmFMaEHjS3pb3LqNDHNIYYpNnvtIukxHUh9weDvr+AH8Rmt/WVfjDc26xBS0FQu
jDJUk9AP06VYgZx0dLKp4In8GJYwz9DNjNrWm91+RyJml9AWrFswdBHHcfi0W/Yy
GipkBZGYE6ZblyMlITZCB4etyHQsq7qLuqicTlcXjL/Fdkd7xlT8DwFlZ8LjpyCU
LeHTI2cGzRSJ/JjL2hvhPvT3gR5hln/qk17jSP7V4S6psZAqAEvw/Xa/+MDJhB/b
vnzltFPvEgZc59Q/SJLbaWZLHy1q0enbrOBLMZDmUlk911/tgAuflHJM60N8o732
vkfy05pvZlrV0cFY546pQd7zTKZcAOYPVHHoP25wPa2ibKBu6eQ6kZEi5zu+tVK3
CkvqIhePFspBMQ6GOPKixTiFV4KFoO1HBtk+JEeMkiHXHk1xATCWbg1m7wkaagsq
NNS/qFkLRnftGYpFViBaxTFBGxiBOSbsTIS/zfj5L7JOpW4FRD4=
=02xw
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
- Update NFSv2 and NFSv3 XDR decoding functions
- Further improve support for re-exporting NFS mounts
- Convert NFSD stats to per-CPU counters
- Add batch Receive posting to the server's RPC/RDMA transport
* tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (65 commits)
nfsd: skip some unnecessary stats in the v4 case
nfs: use change attribute for NFS re-exports
NFSv4_2: SSC helper should use its own config.
nfsd: cstate->session->se_client -> cstate->clp
nfsd: simplify nfsd4_check_open_reclaim
nfsd: remove unused set_client argument
nfsd: find_cpntf_state cleanup
nfsd: refactor set_client
nfsd: rename lookup_clientid->set_client
nfsd: simplify nfsd_renew
nfsd: simplify process_lock
nfsd4: simplify process_lookup1
SUNRPC: Correct a comment
svcrdma: DMA-sync the receive buffer in svc_rdma_recvfrom()
svcrdma: Reduce Receive doorbell rate
svcrdma: Deprecate stat variables that are no longer used
svcrdma: Restore read and write stats
svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter
svcrdma: Convert rdma_stat_recv to a per-CPU counter
svcrdma: Refactor svc_rdma_init() and svc_rdma_clean_up()
...
Pull namei updates from Al Viro:
"Most of that pile is LOOKUP_CACHED series; the rest is a couple of
misc cleanups in the general area...
There's a minor bisect hazard in the end of series, and normally I
would've just folded the fix into the previous commit, but this branch
is shared with Jens' tree, with stuff on top of it in there, so that
would've required rebases outside of vfs.git"
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix handling of nd->depth on LOOKUP_CACHED failures in try_to_unlazy*
fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED
fs: add support for LOOKUP_CACHED
saner calling conventions for unlazy_child()
fs: make unlazy_walk() error handling consistent
fs/namei.c: Remove unlikely of status being -ECHILD in lookup_fast()
do_tmpfile(): don't mess with finish_open()
Here is the big set of USB and Thunderbolt driver changes for 5.12-rc1.
It's been an active set of development in these subsystems for the past
few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on some
of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYCqf5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZhQCgoDMMu9YZZI8chWVlIbDYiHxG520An1SlbwDb
hRh87fsQFkwWk06Bp9AQ
=LmS1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.12-rc1.
It's been an active set of development in these subsystems for the
past few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on
some of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits)
dt-bindings: usb: mediatek: musb: add mt8516 compatbile
dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623
dt-bindings: usb: mtk-xhci: add optional assigned clock properties
Documentation: connector: Update the description of sink-vdos
usb: misc: usb3503: Fix logic in usb3503_init()
dt-bindings: usb: usb-device: fix typo in required properties
usb: Replace lkml.org links with lore
dt-bindings: usb: dwc3: add description for rk3328
dt-bindings: usb: convert rockchip,dwc3.txt to yaml
usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable
USB: quirks: sort quirk entries
USB: serial: drop bogus to_usb_serial_port() checks
USB: serial: make remove callback return void
USB: serial: drop if with an always false condition
usb: gadget: Assign boolean values to a bool variable
usb: typec: tcpm: Get Sink VDO from fwnode
dt-bindings: connector: Add SVDM VDO properties
usb: typec: displayport: Fill the negotiated SVDM Version in the header
usb: typec: ucsi: Determine common SVDM Version
usb: typec: tcpm: Determine common SVDM Version
...
Here is the big set of tty/serial driver changes for 5.12-rc1.
Nothing huge, just lots of good cleanups and additions:
- Your n_tty line discipline cleanups
- vt core cleanups and reworks to make the code more "modern"
- stm32 driver additions
- tty led support added to the tty core and led layer
- minor serial driver fixups and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYCqgqw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymJYQCgnxHmkhzJ2VarTDR3cWm1gu0NU7AAoNe5wWUh
4TQbhB9LSNo78HnIVze0
=Chcg
-----END PGP SIGNATURE-----
Merge tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver changes for 5.12-rc1.
Nothing huge, just lots of good cleanups and additions:
- n_tty line discipline cleanups
- vt core cleanups and reworks to make the code more "modern"
- stm32 driver additions
- tty led support added to the tty core and led layer
- minor serial driver fixups and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
serial: core: Remove BUG_ON(in_interrupt()) check
vt_ioctl: Remove in_interrupt() check
dt-bindings: serial: imx: Switch to my personal address
vt: keyboard, use new API for keyboard_tasklet
serial: stm32: improve platform_get_irq condition handling in init_port
serial: ifx6x60: Remove driver for deprecated platform
tty: fix up iterate_tty_read() EOVERFLOW handling
tty: fix up hung_up_tty_read() conversion
tty: fix up hung_up_tty_write() conversion
tty: teach the n_tty ICANON case about the new "cookie continuations" too
tty: teach n_tty line discipline about the new "cookie continuations"
tty: clean up legacy leftovers from n_tty line discipline
tty: implement read_iter
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
serial: remove sirf prima/atlas driver
serial: mxs-auart: Remove <asm/cacheflush.h>
serial: mxs-auart: Remove serial_mxs_probe_dt()
serial: fsl_lpuart: Use of_device_get_match_data()
dt-bindings: serial: renesas,hscif: Add r8a779a0 support
tty: serial: Drop unused efm32 serial driver
...
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
SCMI firmware:
- add support for a completion interrupt
Reset controllers:
- new driver for BCM4908
- new devm_reset_control_get_optional_exclusive_released()
function
Memory controllers:
- Renesas RZ/G2 support
- Tegra124 interconnect support
- Allow more drivers to be loadable modules
TEE/optee firmware:
- minor code cleanup
The other half of this is SoC specific drivers that do not
belong into any other subsystem, most of them living in
drivers/soc:
- Allwinner/sunxi power management work
- Allwinner H616 support
- ASpeed AST2600 system identification support
- AT91 SAMA7G5 SoC ID driver
- AT91 SoC driver cleanups
- Broadcom BCM4908 power management bus support
- Marvell mbus cleanups
- Mediatek MT8167 power domain support
- Qualcomm socinfo driver support for PMIC
- Qualcomm SoC identification for many more products
- TI Keystone driver cleanups for PRUSS and elsewhere
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmApjS8ACgkQYKtH/8kJ
UidDyw/6ArE2RWN1qk3GJbQKdCYQdqH4Ig/Nc9LA977ul2BX/BohYoEGCoveH5cG
16FaYK8tYDCSoTfS0+w1Y8r6TgZKcV6GCM0xLSVtaihk2CO81sUfDFBIppJd614a
2lGx9DW7205ql4vGcQsK31ncr0hVviHG2e8lOEbFc9SkQpmYuLF1dxW2JK9oWGe2
rLXHKb20N7AvgN8Y6V0YAOGNpu9MOnx0TbTGn6SMgzIKMkpYaSs/oZY11d9jrn7Y
m/iIahRWzLFR/lYdrD7Jowpy2A/lcwPdQlRkOiuF1s6FFCqxe1yQsrpcbt/7fXes
UzOyE494GZFtO0zjFuwglsmiAZDMwO/fQVrIzSGV0SXF8LJpiYYTG1b3Yv5SY5Hr
r7EF4A7GlmNmd6K1HrXTYJz9tr4oxLDw+9LZGx74JV8x0iK3cd1hRTXb1SbspA6h
S/KRQsuEjpAyQ6xXWVp2fp6VxZkrjIpPavbcQw2RsoBnbNdrcXahTk96JfpWYGjH
iyJkEKmCF6/w/s5+xQfy+DYepxFDO0YsPbM7kL5qhaY83KBMOHKJFCUZVWj7md5w
QIVTeeiSewIlT5bG9XyjIfmsImq1acqTW+QCaxCnvMSsZDBbdhTMK48GwyN9U9+x
jdQCPQye3TKL2WU6U40FPNIr08QcNy4vmJp4fMqwK5xO3+P+Zhs=
=I2Zn
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
SCMI firmware:
- add support for a completion interrupt
Reset controllers:
- new driver for BCM4908
- new devm_reset_control_get_optional_exclusive_released() function
Memory controllers:
- Renesas RZ/G2 support
- Tegra124 interconnect support
- Allow more drivers to be loadable modules
TEE/optee firmware:
- minor code cleanup
The other half of this is SoC specific drivers that do not belong into
any other subsystem, most of them living in drivers/soc:
- Allwinner/sunxi power management work
- Allwinner H616 support
- ASpeed AST2600 system identification support
- AT91 SAMA7G5 SoC ID driver
- AT91 SoC driver cleanups
- Broadcom BCM4908 power management bus support
- Marvell mbus cleanups
- Mediatek MT8167 power domain support
- Qualcomm socinfo driver support for PMIC
- Qualcomm SoC identification for many more products
- TI Keystone driver cleanups for PRUSS and elsewhere"
* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
soc: aspeed: socinfo: Add new systems
soc: aspeed: snoop: Add clock control logic
memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
optee: simplify i2c access
drivers: soc: atmel: fix type for same7
tee: optee: remove need_resched() before cond_resched()
soc: qcom: ocmem: don't return NULL in of_get_ocmem
optee: sync OP-TEE headers
tee: optee: fix 'physical' typos
drivers: optee: use flexible-array member instead of zero-length array
tee: fix some comment typos in header files
soc: ti: k3-ringacc: Use of_device_get_match_data()
soc: ti: pruss: Refactor the CFG sub-module init
soc: mediatek: pm-domains: Don't print an error if child domain is deferred
soc: mediatek: pm-domains: Add domain regulator supply
dt-bindings: power: Add domain regulator supply
soc: mediatek: cmdq: Remove cmdq_pkt_flush()
soc: mediatek: pm-domains: Add support for mt8167
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAppPgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGeXYH/imZPBd4A1jIMehN
5HV2A53Z+MXmmaMuGj9X1KV6vsf55/xB+IhOoFdtRAIsO8c2yYSCO8i4+4R0XfYA
+/YFJeq672rojQnmh6XbpR8dugaAV7CUHy6n7KDsyvtT6EOCpwFSwkOb4X3tBRX6
TlYgm2d/xgV/wRHSgLVugK0MdFCLMAnyb7mkPfar9QrMgG1BiDKLq07xmwnS23On
TkqpJ9yZ/rJpUrrUqQYPShSO/FmA+fSfWs0CDv7EIrJ40LUScD6PZxSHWTIHtjLk
E4jFda6wuqLRVWsBwaBzUIdD0zk7X5quHRzEpbC5ga16SK6yrWvE5YJJXCguIEuZ
f3FMRYs=
=CAjn
-----END PGP SIGNATURE-----
Merge tag 'v5.11' into rdma.git for-next
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add two helper functions to release one table and hooks from
the netns and netlink event path.
2) Add table ownership infrastructure, this new infrastructure allows
users to bind a table (and its content) to a process through the
netlink socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add initial set of formal commands beyond basic identify and command
enumeration.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v2)
Link: https://lore.kernel.org/r/20210217040958.1354670-8-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL devices identified by the memory-device class code must implement
the Device Command Interface (described in 8.2.9 of the CXL 2.0 spec).
While the driver already maintains a list of commands it supports, there
is still a need to be able to distinguish between commands that the
driver knows about from commands that are optionally supported by the
hardware.
The Command Effects Log (CEL) is specified in the CXL 2.0 specification.
The CEL is one of two types of logs, the other being vendor specific.
They are distinguished in hardware/spec via UUID. The CEL is useful for
2 things:
1. Determine which optional commands are supported by the CXL device.
2. Enumerate any vendor specific commands
The CEL is used by the driver to determine which commands are available
in the hardware and therefore which commands userspace is allowed to
execute. The set of enabled commands might be a subset of commands which
are advertised in UAPI via CXL_MEM_SEND_COMMAND IOCTL.
With the CEL enabling comes a internal flag to indicate a base set of
commands that are enabled regardless of CEL. Such commands are required
for basic interaction with the hardware and thus can be useful in debug
cases, for example if the CEL is corrupted.
The implementation leaves the statically defined table of commands and
supplements it with a bitmap to determine commands that are enabled.
This organization was chosen for the following reasons:
- Smaller memory footprint. Doesn't need a table per device.
- Reduce memory allocation complexity.
- Fixed command IDs to opcode mapping for all devices makes development
and debugging easier.
- Certain helpers are easily achievable, like cxl_for_each_cmd().
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v3)
Link: https://lore.kernel.org/r/20210217040958.1354670-7-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL memory device send interface will have a number of supported
commands. The raw command is not such a command. Raw commands allow
userspace to send a specified opcode to the underlying hardware and
bypass all driver checks on the command. The primary use for this
command is to [begrudgingly] allow undocumented vendor specific hardware
commands.
While not the main motivation, it also allows prototyping new hardware
commands without a driver patch and rebuild.
While this all sounds very powerful it comes with a couple of caveats:
1. Bug reports using raw commands will not get the same level of
attention as bug reports using supported commands (via taint).
2. Supported commands will be rejected by the RAW command.
With this comes new debugfs knob to allow full access to your toes with
your weapon of choice.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ariel Sibley <Ariel.Sibley@microchip.com>
Link: https://lore.kernel.org/r/20210217040958.1354670-6-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a straightforward IOCTL that provides a mechanism for userspace to
query the supported memory device commands. CXL commands as they appear
to userspace are described as part of the UAPI kerneldoc. The command
list returned via this IOCTL will contain the full set of commands that
the driver supports, however, some of those commands may not be
available for use by userspace.
Memory device commands first appear in the CXL 2.0 specification. They
are submitted through a mailbox mechanism specified in the CXL 2.0
specification.
The send command allows userspace to issue mailbox commands directly to
the hardware. The list of available commands to send are the output of
the query command. The driver verifies basic properties of the command
and possibly inspect the input (or output) payload to determine whether
or not the command is allowed (or might taint the kernel).
Reported-by: kernel test robot <lkp@intel.com> # bug in earlier revision
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20210217040958.1354670-5-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-02-16
The following pull-request contains BPF updates for your *net-next* tree.
There's a small merge conflict between 7eeba1706e ("tcp: Add receive timestamp
support for receive zerocopy.") from net-next tree and 9cacf81f81 ("bpf: Remove
extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows:
[...]
lock_sock(sk);
err = tcp_zerocopy_receive(sk, &zc, &tss);
err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname,
&zc, &len, err);
release_sock(sk);
[...]
We've added 116 non-merge commits during the last 27 day(s) which contain
a total of 156 files changed, 5662 insertions(+), 1489 deletions(-).
The main changes are:
1) Adds support of pointers to types with known size among global function
args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov.
2) Add bpf_iter for task_vma which can be used to generate information similar
to /proc/pid/maps, from Song Liu.
3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow
rewriting bind user ports from BPF side below the ip_unprivileged_port_start
range, both from Stanislav Fomichev.
4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map
as well as per-cpu maps for the latter, from Alexei Starovoitov.
5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer
for sleepable programs, both from KP Singh.
6) Extend verifier to enable variable offset read/write access to the BPF
program stack, from Andrei Matei.
7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to
query device MTU from programs, from Jesper Dangaard Brouer.
8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF
tracing programs, from Florent Revest.
9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when
otherwise too many passes are required, from Gary Lin.
10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function
verification both related to zero-extension handling, from Ilya Leoshkevich.
11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa.
12) Batch of AF_XDP selftest cleanups and small performance improvement
for libbpf's xsk map redirect for newer kernels, from Björn Töpel.
13) Follow-up BPF doc and verifier improvements around atomics with
BPF_FETCH, from Brendan Jackman.
14) Permit zero-sized data sections e.g. if ELF .rodata section contains
read-only data from local variables, from Yonghong Song.
15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add mptcpi_local_addr_used and mptcpi_local_addr_max in struct mptcp_info.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It can be useful to the interpreter to know which flags are in use.
For instance, knowing if the preserve-argv[0] is in use would
allow to skip the pathname argument.
This patch uses an unused auxiliary vector, AT_FLAGS, to add a
flag to inform interpreter if the preserve-argv[0] is enabled.
Note by Helge Deller:
The real-world user of this patch is qemu-user, which needs to know
if it has to preserve the argv[0]. See Debian bug #970460.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: YunQiang Su <ysu@wavecomp.com>
URL: http://bugs.debian.org/970460
Signed-off-by: Helge Deller <deller@gmx.de>
A userspace daemon like firewalld might need to monitor for netlink
updates to detect its ruleset removal by the (global) flush ruleset
command to ensure ruleset persistency. This adds extra complexity from
userspace and, for some little time, the firewall policy is not in
place.
This patch adds the NFT_TABLE_F_OWNER flag which allows a userspace
program to own the table that creates in exclusivity.
Tables that are owned...
- can only be updated and removed by the owner, non-owners hit EPERM if
they try to update it or remove it.
- are destroyed when the owner closes the netlink socket or the process
is gone (implicit netlink socket closure).
- are skipped by the global flush ruleset command.
- are listed in the global ruleset.
The userspace process that sets on the NFT_TABLE_F_OWNER flag need to
leave open the netlink socket.
A new NFTA_TABLE_OWNER netlink attribute specifies the netlink port ID
to identify the owner from userspace.
This patch also updates error reporting when an unknown table flag is
specified to change it from EINVAL to EOPNOTSUPP given that EINVAL is
usually reserved to report for malformed netlink messages to userspace.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
GPL-2.0 license identifier is deprecated. User-space projects that want
to include the kernel header with their source-code will be unable to
become fully REUSE compliant due to the reuse tool complaining about
deprecated licenses. Change the SPDX identifier to GPL-2.0-only.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The description of the flags field of the struct gpio_v2_line_info
mentions "the GPIO lines" while the info only applies to an individual
GPIO line. This was accidentally changed from "the GPIO line" during
formatting improvements.
Reword to "this GPIO line" to clarify and to be consistent with other
struct gpio_v2_line_info fields.
Fixes: 2cc522d393 ("gpio: uapi: kernel-doc formatting improvements")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
* more minstrel work from Felix to reduce the
probing overhead
* QoS for nl80211 control port frames
* STBC injection support
* and a couple of small fixes
-----BEGIN PGP SIGNATURE-----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=PXD5
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-02-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Last set of updates:
* more minstrel work from Felix to reduce the
probing overhead
* QoS for nl80211 control port frames
* STBC injection support
* and a couple of small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow userspace (mptcpd) to subscribe to mptcp genl multicast events.
This implementation reuses the same event API as the mptcp kernel fork
to ease integration of existing tools, e.g. mptcpd.
Supported events include:
1. start and close of an mptcp connection
2. start and close of subflows (joins)
3. announce and withdrawals of addresses
4. subflow priority (backup/non-backup) change.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This BPF-helper bpf_check_mtu() works for both XDP and TC-BPF programs.
The SKB object is complex and the skb->len value (accessible from
BPF-prog) also include the length of any extra GRO/GSO segments, but
without taking into account that these GRO/GSO segments get added
transport (L4) and network (L3) headers before being transmitted. Thus,
this BPF-helper is created such that the BPF-programmer don't need to
handle these details in the BPF-prog.
The API is designed to help the BPF-programmer, that want to do packet
context size changes, which involves other helpers. These other helpers
usually does a delta size adjustment. This helper also support a delta
size (len_diff), which allow BPF-programmer to reuse arguments needed by
these other helpers, and perform the MTU check prior to doing any actual
size adjustment of the packet context.
It is on purpose, that we allow the len adjustment to become a negative
result, that will pass the MTU check. This might seem weird, but it's not
this helpers responsibility to "catch" wrong len_diff adjustments. Other
helpers will take care of these checks, if BPF-programmer chooses to do
actual size adjustment.
V14:
- Improve man-page desc of len_diff.
V13:
- Enforce flag BPF_MTU_CHK_SEGS cannot use len_diff.
V12:
- Simplify segment check that calls skb_gso_validate_network_len.
- Helpers should return long
V9:
- Use dev->hard_header_len (instead of ETH_HLEN)
- Annotate with unlikely req from Daniel
- Fix logic error using skb_gso_validate_network_len from Daniel
V6:
- Took John's advice and dropped BPF_MTU_CHK_RELAX
- Returned MTU is kept at L3-level (like fib_lookup)
V4: Lot of changes
- ifindex 0 now use current netdev for MTU lookup
- rename helper from bpf_mtu_check to bpf_check_mtu
- fix bug for GSO pkt length (as skb->len is total len)
- remove __bpf_len_adj_positive, simply allow negative len adj
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287790461.790810.3429728639563297353.stgit@firesoul
The BPF-helpers for FIB lookup (bpf_xdp_fib_lookup and bpf_skb_fib_lookup)
can perform MTU check and return BPF_FIB_LKUP_RET_FRAG_NEEDED. The BPF-prog
don't know the MTU value that caused this rejection.
If the BPF-prog wants to implement PMTU (Path MTU Discovery) (rfc1191) it
need to know this MTU value for the ICMP packet.
Patch change lookup and result struct bpf_fib_lookup, to contain this MTU
value as output via a union with 'tot_len' as this is the value used for
the MTU lookup.
V5:
- Fixed uninit value spotted by Dan Carpenter.
- Name struct output member mtu_result
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287789952.790810.13134700381067698781.stgit@firesoul
Explicitly define reserved field and require it and any subsequent
fields to be zero-valued for now. Additionally, limit the valid CMSG
flags that tcp_zerocopy_receive accepts.
Fixes: 7eeba1706e ("tcp: Add receive timestamp support for receive zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This needs a new helper that:
- can work in a sleepable context (using sock_gen_cookie)
- takes a struct sock pointer and checks that it's not NULL
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-2-revest@chromium.org
Since "92acdc58ab11 bpf, net: Rework cookie generator as per-cpu one"
socket cookies are not guaranteed to be non-decreasing. The
bpf_get_socket_cookie helper descriptions are currently specifying that
cookies are non-decreasing but we don't want users to rely on that.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-1-revest@chromium.org
Add per-program counter for number of times recursion prevention mechanism
was triggered and expose it via show_fdinfo and bpf_prog_info.
Teach bpftool to print it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-7-alexei.starovoitov@gmail.com
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.
This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support. When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices. When an unsupported setting is used, the blk-crypto
fallback is used as usual.
Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities. Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.
For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reject the unsupported and invalid ct_state flags of cls flower rules.
Fixes: e0ace68af2 ("net/sched: cls_flower: Add matching on conntrack info")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce KVM_CAP_PPC_DAWR1 which can be used by QEMU to query whether
KVM supports 2nd DAWR or not. The capability is by default disabled
even when the underlying CPU supports 2nd DAWR. QEMU needs to check
and enable it manually to use the feature.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The device_attribute .show() and .store() methods gained an extra
parameter in v2.6.13, but the example in the documentation for the
7-segment header file was never updated. Add the missing parameters.
While at it, get rid of the (misspelled) deprecated symbolic
permissions, and switch to DEVICE_ATTR_RW(), which was introduced in
v3.11
Fixes: 54b6f35c99 ("[PATCH] Driver core: change device_attribute callbacks")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210207130543.2128980-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irqfd is a mechanism to inject a specific interrupt to a User VM using a
decoupled eventfd mechanism.
Vhost is a kernel-level virtio server which uses eventfd for interrupt
injection. To support vhost on ACRN, irqfd is introduced in HSM.
HSM provides ioctls to associate a virtual Message Signaled Interrupt
(MSI) with an eventfd. The corresponding virtual MSI will be injected
into a User VM once the eventfd got signal.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-17-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ioeventfd is a mechanism to register PIO/MMIO regions to trigger an
eventfd signal when written to by a User VM. ACRN userspace can register
any arbitrary I/O address with a corresponding eventfd and then pass the
eventfd to a specific end-point of interest for handling.
Vhost is a kernel-level virtio server which uses eventfd for signalling.
To support vhost on ACRN, ioeventfd is introduced in HSM.
A new I/O client dedicated to ioeventfd is associated with a User VM
during VM creation. HSM provides ioctls to associate an I/O region with
a eventfd. The I/O client signals a eventfd once its corresponding I/O
region is matched with an I/O request.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-16-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The C-states and P-states data are used to support CPU power management.
The hypervisor controls C-states and P-states for a User VM.
ACRN userspace need to query the data from the hypervisor to build ACPI
tables for a User VM.
HSM provides ioctls for ACRN userspace to query C-states and P-states
data obtained from the hypervisor.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-14-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACRN userspace need to inject virtual interrupts into a User VM in
devices emulation.
HSM needs provide interfaces to do so.
Introduce following interrupt injection interfaces:
ioctl ACRN_IOCTL_SET_IRQLINE:
Pass data from userspace to the hypervisor, and inform the hypervisor
to inject a virtual IOAPIC GSI interrupt to a User VM.
ioctl ACRN_IOCTL_INJECT_MSI:
Pass data struct acrn_msi_entry from userspace to the hypervisor, and
inform the hypervisor to inject a virtual MSI to a User VM.
ioctl ACRN_IOCTL_VM_INTR_MONITOR:
Set a 4-Kbyte aligned shared page for statistics information of
interrupts of a User VM.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-13-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI device passthrough enables an OS in a virtual machine to directly
access a PCI device in the host. It promises almost the native
performance, which is required in performance-critical scenarios of
ACRN.
HSM provides the following ioctls:
- Assign - ACRN_IOCTL_ASSIGN_PCIDEV
Pass data struct acrn_pcidev from userspace to the hypervisor, and
inform the hypervisor to assign a PCI device to a User VM.
- De-assign - ACRN_IOCTL_DEASSIGN_PCIDEV
Pass data struct acrn_pcidev from userspace to the hypervisor, and
inform the hypervisor to de-assign a PCI device from a User VM.
- Set a interrupt of a passthrough device - ACRN_IOCTL_SET_PTDEV_INTR
Pass data struct acrn_ptdev_irq from userspace to the hypervisor,
and inform the hypervisor to map a INTx interrupt of passthrough
device of User VM.
- Reset passthrough device interrupt - ACRN_IOCTL_RESET_PTDEV_INTR
Pass data struct acrn_ptdev_irq from userspace to the hypervisor,
and inform the hypervisor to unmap a INTx interrupt of passthrough
device of User VM.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-12-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A User VM can access its virtual PCI configuration spaces via port IO
approach, which has two following steps:
1) writes address into port 0xCF8
2) put/get data in/from port 0xCFC
To distribute a complete PCI configuration space access one time, HSM
need to combine such two accesses together.
Combine two paired PIO I/O requests into one PCI I/O request and
continue the I/O request distribution.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-11-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An I/O request of a User VM, which is constructed by the hypervisor, is
distributed by the ACRN Hypervisor Service Module to an I/O client
corresponding to the address range of the I/O request.
For each User VM, there is a shared 4-KByte memory region used for I/O
requests communication between the hypervisor and Service VM. An I/O
request is a 256-byte structure buffer, which is 'struct
acrn_io_request', that is filled by an I/O handler of the hypervisor
when a trapped I/O access happens in a User VM. ACRN userspace in the
Service VM first allocates a 4-KByte page and passes the GPA (Guest
Physical Address) of the buffer to the hypervisor. The buffer is used as
an array of 16 I/O request slots with each I/O request slot being 256
bytes. This array is indexed by vCPU ID.
An I/O client, which is 'struct acrn_ioreq_client', is responsible for
handling User VM I/O requests whose accessed GPA falls in a certain
range. Multiple I/O clients can be associated with each User VM. There
is a special client associated with each User VM, called the default
client, that handles all I/O requests that do not fit into the range of
any other I/O clients. The ACRN userspace acts as the default client for
each User VM.
The state transitions of a ACRN I/O request are as follows.
FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ...
FREE: this I/O request slot is empty
PENDING: a valid I/O request is pending in this slot
PROCESSING: the I/O request is being processed
COMPLETE: the I/O request has been processed
An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM
and ACRN userspace are in charge of processing the others.
The processing flow of I/O requests are listed as following:
a) The I/O handler of the hypervisor will fill an I/O request with
PENDING state when a trapped I/O access happens in a User VM.
b) The hypervisor makes an upcall, which is a notification interrupt, to
the Service VM.
c) The upcall handler schedules a worker to dispatch I/O requests.
d) The worker looks for the PENDING I/O requests, assigns them to
different registered clients based on the address of the I/O accesses,
updates their state to PROCESSING, and notifies the corresponding
client to handle.
e) The notified client handles the assigned I/O requests.
f) The HSM updates I/O requests states to COMPLETE and notifies the
hypervisor of the completion via hypercalls.
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-10-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HSM provides hypervisor services to the ACRN userspace. While
launching a User VM, ACRN userspace needs to allocate memory and request
the ACRN Hypervisor to set up the EPT mapping for the VM.
A mapping cache is introduced for accelerating the translation between
the Service VM kernel virtual address and User VM physical address.
>From the perspective of the hypervisor, the types of GPA of User VM can be
listed as following:
1) RAM region, which is used by User VM as system ram.
2) MMIO region, which is recognized by User VM as MMIO. MMIO region is
used to be utilized for devices emulation.
Generally, User VM RAM regions mapping is set up before VM started and
is released in the User VM destruction. MMIO regions mapping may be set
and unset dynamically during User VM running.
To achieve this, ioctls ACRN_IOCTL_SET_MEMSEG and ACRN_IOCTL_UNSET_MEMSEG
are introduced in HSM.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-9-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A virtual CPU of User VM has different context due to the different
registers state. ACRN userspace needs to set the virtual CPU
registers state (e.g. giving a initial registers state to a virtual
BSP of a User VM).
HSM provides an ioctl ACRN_IOCTL_SET_VCPU_REGS to do the virtual CPU
registers state setting. The ioctl passes the registers state from ACRN
userspace to the hypervisor directly.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-8-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VM management interfaces expose several VM operations to ACRN
userspace via ioctls. For example, creating VM, starting VM, destroying
VM and so on.
The ACRN Hypervisor needs to exchange data with the ACRN userspace
during the VM operations. HSM provides VM operation ioctls to the ACRN
userspace and communicates with the ACRN Hypervisor for VM operations
via hypercalls.
HSM maintains a list of User VM. Each User VM will be bound to an
existing file descriptor of /dev/acrn_hsm. The User VM will be
destroyed when the file descriptor is closed.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-7-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The flag indicates to user space that route offload failed.
Previous patch set added the ability to emit RTM_NEWROUTE notifications
whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, but if the offload
fails there is no indication to user-space.
The flag will be used in subsequent patches by netdevsim and mlxsw to
indicate to user space that route offload failed, so that users will
have better visibility into the offload process.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
of Feb 2nd (batadv-next-pullrequest-20210202) and includes the
following patches:
- Bump version strings, by Simon Wunderlich (added commit log)
- Drop publication years from copyright info, by Sven Eckelmann
(replaced the previous patch which updated copyright years, as per
our discussion)
- Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged)
- Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged)
-----BEGIN PGP SIGNATURE-----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=fX7f
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset is an updated version of the pull request
of Feb 2nd (batadv-next-pullrequest-20210202) and includes the
following patches:
- Bump version strings, by Simon Wunderlich (added commit log)
- Drop publication years from copyright info, by Sven Eckelmann
(replaced the previous patch which updated copyright years, as per
our discussion)
- Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged)
- Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged)
* tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix names for kernel-doc blocks
batman-adv: Avoid sizeof on flexible structure
batman-adv: Drop publication years from copyright info
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20210208165938.13262-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support for an additional filesystem version (sb_fs_format = 1802).
When a filesystem with the new version is mounted, the filesystem
supports "trusted.*" xattrs.
In addition, version 1802 filesystems implement a form of forward
compatibility for xattrs: when xattrs with an unknown prefix (ea_type)
are found on a version 1802 filesystem, those attributes are not shown
by listxattr, and they are not accessible by getxattr, setxattr, or
removexattr.
This mechanism might turn out to be what we need in the future, but if
not, we can always bump the filesystem version and break compatibility
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Add support for FS_VERITY_METADATA_TYPE_SIGNATURE to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the built-in signature (if present) of a verity file for
serving to a client which implements fs-verity compatible verification.
See the patch which introduced FS_IOC_READ_VERITY_METADATA for more
details.
The ability for userspace to read the built-in signatures is also useful
because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-7-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add support for FS_VERITY_METADATA_TYPE_DESCRIPTOR to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the fs-verity descriptor of a file for serving to a client
which implements fs-verity compatible verification. See the patch which
introduced FS_IOC_READ_VERITY_METADATA for more details.
"fs-verity descriptor" here means only the part that userspace cares
about because it is hashed to produce the file digest. It doesn't
include the signature which ext4 and f2fs append to the
fsverity_descriptor struct when storing it on-disk, since that way of
storing the signature is an implementation detail. The next patch adds
a separate metadata_type value for retrieving the signature separately.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-6-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add support for FS_VERITY_METADATA_TYPE_MERKLE_TREE to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the Merkle tree of a verity file for serving to a client which
implements fs-verity compatible verification. See the patch which
introduced FS_IOC_READ_VERITY_METADATA for more details.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-5-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity
metadata from a file that has fs-verity enabled, including:
- The Merkle tree
- The fsverity_descriptor (not including the signature if present)
- The built-in signature, if present
This ioctl has similar semantics to pread(). It is passed the type of
metadata to read (one of the above three), and a buffer, offset, and
size. It returns the number of bytes read or an error.
Separate patches will add support for each of the above metadata types.
This patch just adds the ioctl itself.
This ioctl doesn't make any assumption about where the metadata is
stored on-disk. It does assume the metadata is in a stable format, but
that's basically already the case:
- The Merkle tree and fsverity_descriptor are defined by how fs-verity
file digests are computed; see the "File digest computation" section
of Documentation/filesystems/fsverity.rst. Technically, the way in
which the levels of the tree are ordered relative to each other wasn't
previously specified, but it's logical to put the root level first.
- The built-in signature is the value passed to FS_IOC_ENABLE_VERITY.
This ioctl is useful because it allows writing a server program that
takes a verity file and serves it to a client program, such that the
client can do its own fs-verity compatible verification of the file.
This only makes sense if the client doesn't trust the server and if the
server needs to provide the storage for the client.
More concretely, there is interest in using this ability in Android to
export APK files (which are protected by fs-verity) to "protected VMs".
This would use Protected KVM (https://lwn.net/Articles/836693), which
provides an isolated execution environment without having to trust the
traditional "host". A "guest" VM can boot from a signed image and
perform specific tasks in a minimum trusted environment using files that
have fs-verity enabled on the host, without trusting the host or
requiring that the guest has its own trusted storage.
Technically, it would be possible to duplicate the metadata and store it
in separate files for serving. However, that would be less efficient
and would require extra care in userspace to maintain file consistency.
In addition to the above, the ability to read the built-in signatures is
useful because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
redirection range specification before the API has been made official in 5.11.
- Ensure tasks using the generic syscall code do trap after returning
from a syscall when single-stepping is requested.
-----BEGIN PGP SIGNATURE-----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=l5j7
-----END PGP SIGNATURE-----
Merge tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull syscall entry fixes from Borislav Petkov:
- For syscall user dispatch, separate prctl operation from syscall
redirection range specification before the API has been made official
in 5.11.
- Ensure tasks using the generic syscall code do trap after returning
from a syscall when single-stepping is requested.
* tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Use different define for selector variable in SUD
entry: Ensure trap after single-step on system call return
The batman-adv source code was using the year of publication (to net-next)
as "last" year for the copyright statement. The whole source code mentioned
in the MAINTAINERS "BATMAN ADVANCED" section was handled as a single entity
regarding the publishing year.
This avoided having outdated (in sense of year information - not copyright
holder) publishing information inside several files. But since the simple
"update copyright year" commit (without other changes) in the file was not
well received in the upstream kernel, the option to not have a copyright
year (for initial and last publication) in the files are chosen instead.
More detailed information about the years can still be retrieved from the
SCM system.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Michael Kerrisk suggested that, from an API perspective, it is a bad
idea to share the PR_SYS_DISPATCH_ defines between the prctl operation
and the selector variable.
Therefore, define two new constants to be used by SUD's selector variable
and update the corresponding documentation and test cases.
While this changes the API syscall user dispatch has never been part of a
Linux release, it will show up for the first time in 5.11.
Suggested-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210205184321.2062251-1-krisman@collabora.com
This reverts commit 9ab7e76aef.
This patch was committed without maintainer approval and despite a number
of unaddressed concerns from review. There are several issues that
impede the acceptance of this patch and that make a reversion of this
particular instance of these changes the best way forward:
i) the patch contains several logically separate changes that would be
better served as smaller patches (for review purposes)
ii) functionality like the handling of end markers has been introduced
without further explanation
iii) symmetry between the handling of GTPv0 and GTPv1 has been
unnecessarily broken
iv) the patchset produces 'broken' packets when extension headers are
included
v) there are no available userspace tools to allow for testing this
functionality
vi) there is an unaddressed Coverity report against the patch concering
memory leakage
vii) most importantly, the patch contains a large amount of superfluous
churn that impedes other ongoing work with this driver
This patch will be reworked into a series that aligns with other
ongoing work and facilitates review.
Signed-off-by: Jonas Bonn <jonas@norrbonn.se>
Acked-by: Harald Welte <laforge@gnumonks.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add feature called "staged command submissions". In this feature,
the driver allows the user to submit multiple command submissions
that describe a single pass on the deep learning graph. The driver
tracks the completion of the entire pass by the last stage CS.
- Update code to support the latest firmware image
- Optimizations and improvements to MMU code:
- Support page size that is not power-of-2
- Make the locks scheme simpler
- mmap areas in device configuration space to userspace
- Security fixes:
- Make ETR non-secured
- Remove access to kernel memory through debug-fs interface
- Remove access through PCI bar to SyncManager register block
in Gaudi
- Many small bug fixes
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE7TEboABC71LctBLFZR1NuKta54AFAmARvmgTHG9nYWJiYXlA
a2VybmVsLm9yZwAKCRBlHU24q1rngJ67B/9eSEhEXDoYVXjdt0qebOf2sAI65csq
ZZ5FXcnkQHjStytpSfBTztlz1fvRF9sged7Kta98Bl+H70JqebzRhv076ZDT5IEs
0DI//FoMYIShItTtFwgjINU8QGBww42Cod4SXNJ6wpRBrIhtBQF3Yn9XpWA7nesY
ido3O7Vf73mU+gCA+mj1TBkhmGg+tZ8c1rwhItBkNYjU9mQwSZSEY/fGwtadwsB/
GECYAu3ekZn/RmUC9YvJ68o6b/CLpAmOGSqcOsj6mRzL9CsI73KuVU23N0plnLaX
kuCCSLRZb2AbNnj5u7Hp7FvwBa8LVlxYRsCKbTJ9KXpmSlbrj67I4sHw
=cqv6
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2021-01-27' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v5.12:
- Add feature called "staged command submissions". In this feature,
the driver allows the user to submit multiple command submissions
that describe a single pass on the deep learning graph. The driver
tracks the completion of the entire pass by the last stage CS.
- Update code to support the latest firmware image
- Optimizations and improvements to MMU code:
- Support page size that is not power-of-2
- Make the locks scheme simpler
- mmap areas in device configuration space to userspace
- Security fixes:
- Make ETR non-secured
- Remove access to kernel memory through debug-fs interface
- Remove access through PCI bar to SyncManager register block
in Gaudi
- Many small bug fixes
* tag 'misc-habanalabs-next-2021-01-27' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (41 commits)
habanalabs: update to latest hl_boot_if.h spec from F/W
habanalabs/gaudi: unmask HBM interrupts after handling
habanalabs: update SyncManager interrupt handling
habanalabs: fix ETR security issue
habanalabs: staged submission support
habanalabs: modify device_idle interface
habanalabs: add CS completion and timeout properties
habanalabs: add new mem ioctl op for mapping hw blocks
habanalabs: fix MMU debugfs related nodes
habanalabs: add user available interrupt to hw_ip
habanalabs: always try to use the hint address
CREDITS: update email address and home address
habanalabs: update email address in sysfs/debugfs docs
habanalabs: add security violations dump to debugfs
habanalabs: ignore F/W BMC errors in case no BMC present
habanalabs/gaudi: print sync manager SEI interrupt info
habanalabs: Use 'dma_set_mask_and_coherent()'
habanalabs/gaudi: remove PCI access to SM block
habanalabs: add driver support for internal cb scheduling
habanalabs: increment ctx ref from within a cs allocation
...
Instead of adding a plethora of new KVM_CAP_XEN_FOO capabilities, just
add bits to the return value of KVM_CAP_XEN_HVM.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
It turns out that we can't handle event channels *entirely* in userspace
by delivering them as ExtINT, because KVM is a bit picky about when it
accepts ExtINT interrupts from a legacy PIC. The in-kernel local APIC
has to have LVT0 configured in APIC_MODE_EXTINT and unmasked, which
isn't necessarily the case for Xen guests especially on secondary CPUs.
To cope with this, add kvm_xen_get_interrupt() which checks the
evtchn_pending_upcall field in the Xen vcpu_info, and delivers the Xen
upcall vector (configured by KVM_XEN_ATTR_TYPE_UPCALL_VECTOR) if it's
set regardless of LAPIC LVT0 configuration. This gives us the minimum
support we need for completely userspace-based implementation of event
channels.
This does mean that vcpu_enter_guest() needs to check for the
evtchn_pending_upcall flag being set, because it can't rely on someone
having set KVM_REQ_EVENT unless we were to add some way for userspace to
do so manually.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Allow the Xen emulated guest the ability to register secondary
vcpu time information. On Xen guests this is used in order to be
mapped to userspace and hence allow vdso gettimeofday to work.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
The vcpu info supersedes the per vcpu area of the shared info page and
the guest vcpus will use this instead.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Add KVM_XEN_ATTR_TYPE_SHARED_INFO to allow hypervisor to know where the
guest's shared info page is.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
This will be used to set up shared info pages etc.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Add a new exit reason for emulator to handle Xen hypercalls.
Since this means KVM owns the ABI, dispense with the facility for the
VMM to provide its own copy of the hypercall pages; just fill them in
directly using VMCALL/VMMCALL as we do for the Hyper-V hypercall page.
This behaviour is enabled by a new INTERCEPT_HCALL flag in the
KVM_XEN_HVM_CONFIG ioctl structure, and advertised by the same flag
being returned from the KVM_CAP_XEN_HVM check.
Rename xen_hvm_config() to kvm_xen_write_hypercall_page() and move it
to the nascent xen.c while we're at it, and add a test case.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Virtual Machine can exploit bus locks to degrade the performance of
system. Bus lock can be caused by split locked access to writeback(WB)
memory or by using locks on uncacheable(UC) memory. The bus lock is
typically >1000 cycles slower than an atomic operation within a cache
line. It also disrupts performance on other cores (which must wait for
the bus lock to be released before their memory operations can
complete).
To address the threat, bus lock VM exit is introduced to notify the VMM
when a bus lock was acquired, allowing it to enforce throttling or other
policy based mitigations.
A VMM can enable VM exit due to bus locks by setting a new "Bus Lock
Detection" VM-execution control(bit 30 of Secondary Processor-based VM
execution controls). If delivery of this VM exit was preempted by a
higher priority VM exit (e.g. EPT misconfiguration, EPT violation, APIC
access VM exit, APIC write VM exit, exception bitmap exiting), bit 26 of
exit reason in vmcs field is set to 1.
In current implementation, the KVM exposes this capability through
KVM_CAP_X86_BUS_LOCK_EXIT. The user can get the supported mode bitmap
(i.e. off and exit) and enable it explicitly (disabled by default). If
bus locks in guest are detected by KVM, exit to user space even when
current exit reason is handled by KVM internally. Set a new field
KVM_RUN_BUS_LOCK in vcpu->run->flags to inform the user space that there
is a bus lock detected in guest.
Document for Bus Lock VM exit is now available at the latest "Intel
Architecture Instruction Set Extensions Programming Reference".
Document Link:
https://software.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.html
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20201106090315.18606-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SEV FW version >= 0.23 added a new command that can be used to query
the attestation report containing the SHA-256 digest of the guest memory
encrypted through the KVM_SEV_LAUNCH_UPDATE_{DATA, VMSA} commands and
sign the report with the Platform Endorsement Key (PEK).
See the SEV FW API spec section 6.8 for more details.
Note there already exist a command (KVM_SEV_LAUNCH_MEASURE) that can be
used to get the SHA-256 digest. The main difference between the
KVM_SEV_LAUNCH_MEASURE and KVM_SEV_ATTESTATION_REPORT is that the latter
can be called while the guest is running and the measurement value is
signed with PEK.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: John Allen <john.allen@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20210104151749.30248-1-brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, when auto negotiation is on, the user can advertise all the
linkmodes which correspond to a specific speed, but does not have a
similar selector for the number of lanes. This is significant when a
specific speed can be achieved using different number of lanes. For
example, 2x50 or 4x25.
Add 'ETHTOOL_A_LINKMODES_LANES' attribute and expand 'struct
ethtool_link_settings' with lanes field in order to implement a new
lanes-selector that will enable the user to advertise a specific number
of lanes as well.
When auto negotiation is off, lanes parameter can be forced only if the
driver supports it. Add a capability bit in 'struct ethtool_ops' that
allows ethtool know if the driver can handle the lanes parameter when
auto negotiation is off, so if it does not, an error message will be
returned when trying to set lanes.
Example:
$ ethtool -s swp1 lanes 4
$ ethtool swp1
Settings for swp1:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKR/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseSR/Full
50000baseCR2/Full
100000baseSR4/Full
100000baseCR4/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
100000baseSR4/Full
100000baseCR4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: on
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Link detected: no
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fixes some comment typos in header files
- Updates to use flexible-array member instead of zero-length array
- Syncs internal OP-TEE headers with the ones from OP-TEE OS
-----BEGIN PGP SIGNATURE-----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=hZqK
-----END PGP SIGNATURE-----
Merge tag 'tee-housekeeping-for-v5.12' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
TEE subsystem housekeeping
- Fixes some comment typos in header files
- Updates to use flexible-array member instead of zero-length array
- Syncs internal OP-TEE headers with the ones from OP-TEE OS
* tag 'tee-housekeeping-for-v5.12' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
optee: sync OP-TEE headers
tee: optee: fix 'physical' typos
drivers: optee: use flexible-array member instead of zero-length array
tee: fix some comment typos in header files
Link: https://lore.kernel.org/r/20210203120742.GA3624453@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Define interfaces that allow the underlying memory object of an iova
range to be mapped to a new host virtual address in the host process:
- VFIO_DMA_UNMAP_FLAG_VADDR for VFIO_IOMMU_UNMAP_DMA
- VFIO_DMA_MAP_FLAG_VADDR flag for VFIO_IOMMU_MAP_DMA
- VFIO_UPDATE_VADDR extension for VFIO_CHECK_EXTENSION
Unmap vaddr invalidates the host virtual address in an iova range, and
blocks vfio translation of host virtual addresses. DMA to already-mapped
pages continues. Map vaddr updates the base VA and resumes translation.
See comments in uapi/linux/vfio.h for more details.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For the UNMAP_DMA ioctl, delete all mappings if VFIO_DMA_UNMAP_FLAG_ALL
is set. Define the corresponding VFIO_UNMAP_ALL extension.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eCIK
-----END PGP SIGNATURE-----
Merge tag 'media/v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"The rockship rkisp1 driver will be promoted from staging in 5.11.
While not too late, do a few uAPI changes which are needed to better
support its functionalities"
* tag 'media/v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rockchip: rkisp1: extend uapi array sizes
media: rockchip: rkisp1: carry ip version information
media: rockchip: rkisp1: reduce number of histogram grid elements in uapi
media: rkisp1: stats: mask the hist_bins values
media: rkisp1: stats: remove a wrong cast to u8
media: rkisp1: uapi: change hist_bins array type from __u16 to __u32
This patch adds support for skipping a file descriptor when using
IORING_REGISTER_FILES_UPDATE. __io_sqe_files_update will skip fds set
to IORING_REGISTER_FILES_SKIP. IORING_REGISTER_FILES_SKIP is inturn
added as a #define in io_uring.h
Signed-off-by: noah <goldstein.w.n@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a prep rename patch for subsequent patches to generalize file
registration.
[io_uring_rsrc_update:: rename fds -> data]
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
[leave io_uring_files_update as struct]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge RESOLVE_CACHED bits from Al, as the io_uring changes will build on
top of that.
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED
fs: add support for LOOKUP_CACHED
saner calling conventions for unlazy_child()
fs: make unlazy_walk() error handling consistent
fs/namei.c: Remove unlikely of status being -ECHILD in lookup_fast()
do_tmpfile(): don't mess with finish_open()
