The scan request command is identical in binary format to the previous
scan request command and the only change is now a previously reserved
octet is used to indicate new flags introduced in the command. Align
the code to support the new version and the previous one.
Later patches would add the specific handling for the new
flags.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.392a4af559bc.Ib8f1e3b527453531c10bfd7f4b116d3e257c7f1f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When the station is removed we need to remove the session protection
that may be still running.
Note that we need also to remove the session protection upon unassoc in
case the station is kept in the AUTH state.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.483977310ca2.If7eba02594f20dabd22d758e1c917fbca54b2ddd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
A new version of this command deprecates the rxchain_info field
but is otherwise the same, so treat it the same way. We already
leave the rxchain_info zeroed since the RLC command is supported.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.aca5bd78518e.I2f1b4b38899717851ea9f5b6dd23cde27e10387a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's an RLC configuration command in the firmware that's
going to replace the chain information in the PHY context.
Add support for this command, while leaving the PHY context
fields unset when we know the RLC command will be used.
Also add support to send only the RLC configuration command
if only the # of chains used on the PHY context changes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.55faa3782bb0.I3f9d0071e680cab513c59b093d0827af99d41c51@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Newer firmware versions are going to come with a new version
of the wowlan status API, which gives us replay counters for
both GTKs that might still be in use, as well as unifying the
layout of the counters to just be 64-bit quantities.
Extend our code to handle this case and be able to install
replay counters for both keys, if they're sent up from the
firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.73637acafe0b.I33e27712a12fff2816edc0a8abda1759259e20d7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's a new version with some addition, we'll need to
do something with the additional data later, but for now
just parse it so we don't fail with the newer firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.f856cb190a4e.I77e3ff5a92b1bcc3e81c1344b046dade0a8b6a24@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Move the GTK rekeying condition into iwl_mvm_set_key_rx_seq()
so we can modify it in the next patch. In the next firmware
API revision we'll properly get data for both active GTKs and
will have to install it accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.f309942ddd15.Iaa95c602f3a681dd464e10ce2de047aa86fac19c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We have a MAC component (which is inside the SoC) and it has several
different HW steps. 3 bits used to be enough but now we need 4-bits
to represent all the different steps.
Properly support 4-bits in the MAC step value by refactoring all the
current handling of the MAC step/dash.
Already from family 8000 and up the dash (bits 0-1) no longer exists
and the step (until 8000 bits 2-3) consists of the dash bits as well.
To do this remove the CSR_HW_REV_STEP and the CSR_HW_REV_DASH
macros, replace them with CSR_HW_REV_STEP_DASH and add hw_rev_step
into the trans struct.
In addition remove the CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP and
CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH macros and create a new macro
combining the 2 (this way we don't need shifting or anything else.)
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Mike Golant <michael.golant@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211207160459.2e81a14d1f80.Ia5287e37fb3439d805336837361f6491f958e465@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.
Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649
Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reported-by: Maximilian Ernestus <maximilian@ernestus.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If we happen to decide an NSSN queue sync (IWL_MVM_RXQ_NSSN_SYNC)
for some remaining packets that are still on the queue, but just
after we've decided to do a delBA (which causes its own queues
sync with IWL_MVM_RXQ_NOTIF_DEL_BA) we can end up with a sequence
of events like this:
CPU 1 CPU 2
remove BA session with baid N
send IWL_MVM_RXQ_NOTIF_DEL_BA
send IWL_MVM_RXQ_NSSN_SYNC
get IWL_MVM_RXQ_NOTIF_DEL_BA
get IWL_MVM_RXQ_NOTIF_DEL_BA
get IWL_MVM_RXQ_NSSN_SYNC
complete IWL_MVM_RXQ_NOTIF_DEL_BA
remove N from baid_map[]
get IWL_MVM_RXQ_NSSN_SYNC
WARN_ON(!baid_map[N])
Thus, there's a race that leads in hitting the WARN_ON, but more
importantly, it's a race that potentially even results in a new
aggregation session getting assigned to baid N.
To fix this, remove the WARN_ON() in the NSSN_SYNC case, we can't
completely protect against hitting this case, so we shouldn't be
warning. However, guard ourselves against BAID reuse by doing yet
another round of queue synchronization after the entry is removed
from the baid_map, so that it cannot be reused with any in-flight
IWL_MVM_RXQ_NSSN_SYNC messages.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083237.44abbbc50f40.I5492600dfe513356555abe2d7df0e2835846e3d8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes the following W=1 kernel build warning:
drivers/net/wireless/intel/iwlwifi/mvm/rfi.c:11: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
[removed the static const fix, since it's already done and
updated the commit message accordingly.]
Link: https://lore.kernel.org/r/20210517050141.61488-7-shenyang39@huawei.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Smatch spot a possible NULL pointer dereference. Fix it.
__iwl_mvm_mac_set_key can be called with sta = NULL
Also add a NULL pointer check after memory allocation.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20211130105951.85539-1-emmanuel.grumbach@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
It's easier to use and understand, and to extend for EHT later,
if we use the values here instead of the shifted values.
Unfortunately, we need to add _POS so that we can use it in
places like iwlwifi/mvm where constants are needed.
While at it, fix the typo ("NOMIMAL") which also helps catch any
conflicts.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20211126104817.7c29a05b8eb5.I2ca9faf06e177e3035bec91e2ae53c2f91d41774@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Read the rfkill state upon boot, mac start and mac stop.
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-6-emmanuel.grumbach@intel.com
Add the vendor commands that must be used by the network manager
to allow proper operation of iwlmei.
* Send information on the AP CSME is connected to
* Notify the userspace when roaming is forbidden
* Allow the userspace to require ownership
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v6: remove the VENDOR_CMDS Kconfig option and make the whole infra
depend on IWLMEI directly
v7: remove // comments
remove an unneeded function
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-5-emmanuel.grumbach@intel.com
iwlmei needs to know about the follwing events:
* Association
* De-association
* Country Code change
* SW Rfkill change
* SAR table changes
iwlmei can take the device away from us, so report the new
rfkill type when this happens.
Advertise the required data from the CSME firmware to the
usersapce: mostly, the AP that the CSME firmware is currently
associated to in case there is an active link protection
session.
Generate the HOST_ASSOC / HOST_DISSASSOC messages.
Don't support WPA1 (non-RSNA) for now.
Don't support shared wep either.
We can then determine the AUTH parameter by checking the AKM.
Feed the cipher from the key installation.
SW Rfkill will be implemented later when cfg80211 will
allow us to read the SW Rfkill state.
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v7: Ayala added her signed-off
remove pointless function declaration
fix a bug due to merge conflict in the HOST_ASSOC message
v8: leave a print if we have a SAP connection on a device we do
not support (yet)
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-4-emmanuel.grumbach@intel.com
Fix warnings produced by:
- lockdep_assert_wiphy() in function reg_process_self_managed_hint(),
- wiphy_dereference() in function iwl_mvm_init_fw_regd().
Both function are expected to be called in critical section.
The warnings were discovered when running v5.15 kernel
with debug options enabled:
1)
Hardware name: Google Delbin/Delbin
RIP: 0010:reg_process_self_managed_hint+0x254/0x347 [cfg80211]
...
Call Trace:
regulatory_set_wiphy_regd_sync+0x3d/0xb0
iwl_mvm_init_mcc+0x49d/0x5a2
iwl_op_mode_mvm_start+0x1b58/0x2507
? iwl_mvm_reprobe_wk+0x94/0x94
_iwl_op_mode_start+0x146/0x1a3
iwl_opmode_register+0xda/0x13d
init_module+0x28/0x1000
2)
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:263 suspicious rcu_dereference_protected() usage!
...
Hardware name: Google Delbin/Delbin, BIOS Google_Delbin
Call Trace:
dump_stack_lvl+0xb1/0xe6
iwl_mvm_init_fw_regd+0x2e7/0x379
iwl_mvm_init_mcc+0x2c6/0x5a2
iwl_op_mode_mvm_start+0x1b58/0x2507
? iwl_mvm_reprobe_wk+0x94/0x94
_iwl_op_mode_start+0x146/0x1a3
iwl_opmode_register+0xda/0x13d
init_module+0x28/0x100
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211110215744.5487-1-lukasz.bartosik@semihalf.com
In some very rare cases the init flow may fail. In many cases, this is
recoverable, so we can retry. Implement a loop to retry two more times
after the first attempt failed.
This can happen in two different situations, namely during probe and
during mac80211 start. For the first case, a simple loop is enough.
For the second case, we need to add a flag to prevent mac80211 from
trying to restart it as well, leaving full control with the driver.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid
When we receive an association response, a significant amount
of time might have passed since we sent the corresponding
association request (mac80211 will wait up to 500ms for the TX
and then 100ms for the response after ACK was received). But
the time event is touched only when we send the assoc request,
so it might not have much time remaining, more easily causing
the (dreaded)
No beacon heard and the session protection is over already...
message.
Refactor iwl_mvm_mac_mgd_prepare_tx() and split out a new
function iwl_mvm_protect_assoc(), and call it on successful
association to extend the time event to the minimum time if
necessary.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.411c174d9e5e.I03c701c2e9e6788f34546e538264763db0ab30ef@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If we somehow get disassociated while still waiting for a beacon
during connection, we can end up printing the
No beacon heard and the session protection is over already...
message even if we aren't really quite waiting for it anymore.
Remove the time event, if it's running, when we get disassociated
and don't need to wait for beacons anymore.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.6192e2363784.Ie9c2bfdc30dcfff2c4dd7c393c79e3ac182840a9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When this code was implemented, there was no official FW API
description yet, so a placeholder name was used (GEO_TX_POWER_LIMIT).
But then the command became actually called
PER_CHAIN_LIMIT_OFFSET_CMD. Rename the command (and change related
comments) to PER_CHAIN_LIMIT_OFFSET_CMD to avoid confusion.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.672fa727ef75.I6572df5d1e3441a0214993a59985da9a9431f3e5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Trying to convert from one firmware data representation to the
next version is getting tedious and error-prone, and doesn't
lend itself well to new APIs being added. Additionally, the
version 11 of the API as defined in the driver doesn't even
exist in the firmware.
Instead of converting to a newer firmware version of the data,
convert to an internal representation. This takes a bit more
space because the TKIP/AES counters etc. must be kept twice,
their representation is different and we don't know which of
the ones it is until later, but this is just a temporary use
of memory, and the code is clearer this way.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.9e71630627f3.Iad975e15338844ca068683f62a51eb1fcb69e608@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's a new revision of the WGDS table with more data,
and corresponding firmware API to pass it through. Add
support for both.
Since we now support 4 different versions, make a table
to load them instead of hard-coding it all.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.2f9b8e304f25.If88d2d1309270e659d4845c5b5c22d5e8d8e2caf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
To improve chances of hearing beacons and probe responses during
a scan which (based on the scan request parameters) looks like a
roaming scan, enable reception on all chains.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.f115ad455aca.I5de854fe8ce58c85c21a7adf43526acb29156a08@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read the bitmap from the ACPI and pass it to he FW
through LARI_CONFIG_CHANGE_CMD.
This allows OEMs to override channel state to active
as per Geo Location bitmap.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.23d4f2d182c0.I39ac5ff74ac6f2223f393657205eddc1c8e48890@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sometimes driver fails to detect misbehaving AP since we may
miss a few beacons (AP is declared misbehaving only after the second
time CSA counter has a wrong jump).
Move the print to the start of the function to avoid doubts when
analysing this kind of issues.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.8e6b1eb8a436.I5fd6caee968007e91d03b93d6ea84b670ce047e9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Set BT coex high priority during the 802.1X handshake to avoid
issues where BT is active enough to kill all the big negotiation
frames that we may need to send (e.g. with a large certificate),
leading to the connection not being established correctly. Give
WiFi priority over BT during this short but critical phase.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.a1825bbba397.I10315577fb41dfcec15c92e8f6785d9655f74c6a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Code tried to avoid setting ACs for PS-poll by an early return.
However as a result the timeouts weren't set as well.
Inactivity timeout of zero means we will always try to go back to
sleep immediately after moving to AM, which doesn't make much sense,
and isn't supported by FW.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.dda7f6ba0b22.Ia107bfe496b84e8a2edb33d9f39a5d2b56ed63f7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Evidently, it's possible to hit this issue, so reduce the
noise from it by just having it print a (rate-limited)
message instead. We don't really know yet why we hit it,
but there's no value in having a WARN_ON() here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.8d503387b523.Id2c82d023df5128e553b28c935d30df4d9411917@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When auth/assoc completes, we should remove session protection,
except when association is successful, where we need it until a
beacon is received from the AP.
In particular, in the case of assoc comeback, currently the session
protection event just times out, leading to confusing messages:
wlan0: 42:00:00:00:00:00 rejected association temporarily; comeback duration 1000 TU (1024 ms)
iwlwifi 0000:00:00.0: Not associated and the session protection is over already...
wlan0: Connection to AP 42:00:00:00:00:00 lost
wlan0: associate with 42:00:00:00:00:00 (try 2/3)
mac80211 never does anything on the "Connection ... lost" as it's
not even connected.
Removing the session protection when it's no longer needed removes
those confusing messages and lets the device do other things in the
allocated time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.95e4bebb069b.I635280e5d26c70414ac6eb5d62b46fe4bd942818@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Remove the unused csi parameter from
iwl_mvm_pass_packet_to_mac80211(). It is not used anymore, but was
accidentally left in.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211017132604.480251-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags this two APIs
may use the new rate. Add support for the new rate.
These two APIs were updated in one patch because both of them
are using the same functions which were changed.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.7eb6240b8079.I1e804e70a8ebd23840a9431fc5d2a56ad8d5d1a2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of this
structures was added in the FW. Add support for this new
version and for the new rate_n_flags in this API.
Both these APIs were updated in one patch since they are
using the same functions.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.a28e7a92f558.I19f72735c674f815c6e7c11cecfad6230b4510ef@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of
BEACON_TEMPLATE_CMD was added in FW in order to support
the new rate_n_flags.
Add support for the new version.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b42e67f14293.Ic3f1ed8cb3a31cfaa51174497dd993936b00d398@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, FW added a new version for
LOCATION_RANGE_RSP_NTFY, and it's internal structure -
LOCATION_RANGE_RSP_AP_ETRY_NTFY. Add support for this.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.c5c6c863631e.I4b493f4eeabbfa1dc965ae012b72fc57de7d5f4f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of tlc_update_notif
was added in FW in order to support the new rate_n_flags.
Add support for the new version, and move the all API to use the
new rate_n_flags only (if FW supports the old one - convert it).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.9fc0cb5d5898.I1f88e02317f79f1be7f792c01236d836045a44b3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate & flags, convert an old format rate to
the new. This is needed if the driver supports the new format
but the FW supports the old one.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.1ea5263dafec.Iadffe7cb26554d4c23c9242eb2ec8326306202a9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Use the previously added infrastructure to scrub key material
in firmware dumps:
* in the TX FIFO data, just search for each key that we
know about and override such data
* scrub various commands that we sent to the firmware if
they're present
* in firmware memory, where advertised by firmware TLVs
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.d1514964e6a7.I18f8c2ce8082952af7cfe5f8fe75fe51851b8853@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In firmware dumps, currently all kinds of key material may be
included, e.g. in host commands (if firmware crashes during the
processing of a key-related command) or in the TX FIFO(s) if
we have been using in-TX-command key material.
Additionally, some firmware versions will advertise sections
of their internal data to not dump, due to them containing some
sensitive data.
Add some infrastructure to allow scrubbing this data out, as
dependent on the opmode's idea of what will need to be done.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.360cc8fe55b1.Ie3bd3ece38043969f7e116e61a6ec1197a58d78b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Consensus seems to be emerging that corporations or groups
shouldn't be listed as module authors, and we will not
maintain this email address any longer. Just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.32109514aad0.I91a7d745f4ab50ee8ef918ece00dda8251541595@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We should consider the P2P interface type, which isn't in
vif->type due to mac80211's special handling of that. Use
ieee80211_vif_type_p2p() to convert appropriately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.8e992a3beee2.I4231ac8a7ae8f844e35a1ec221baf3e2b676e765@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If resume fails for some reason, we need to set the PM state
back to normal so we're able to send commands during firmware
reset, rather than failing all of them because we're in D3.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 708a39aaca ("iwlwifi: mvm: don't send commands during suspend\resume transition")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.7ceb9eaca9f6.If0cbef38c6d07ec1ddce125878a4bdadcb35d2c9@changeid
This code was refactored and the mutex_unlock(&mvm->mutex); was
accidentally deleted.
Fixes: af3aab9ce2 ("iwlwifi: mvm: d3: make key reprogramming iteration optional")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210831081849.GB9846@kili
These should be >= ARRAY_SIZE() instead of > ARRAY_SIZE() to prevent an
out of bounds write on the next line.
Fixes: 79e561f0f0 ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210831081802.GA9846@kili
In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL
before dereferencing it.
Fixes: 7b3954a1d6 ("iwlwifi: mvm: Explicitly stop session protection before unbinding")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210907143156.e80e52167d93.Ie2247f43f8acb2cee6dff5b07a3947c79a772835@changeid
Due to a rebase damage, we lost the rtnl_lock() when the patch was
sent out. This causes an RTNL imbalance and failed assertions, due to
missing RTNL protection, for instance:
RTNL: assertion failed at net/wireless/reg.c (4025)
WARNING: CPU: 60 PID: 1720 at net/wireless/reg.c:4025 regulatory_set_wiphy_regd_sync+0x7f/0x90 [cfg80211]
Call Trace:
iwl_mvm_init_mcc+0x170/0x190 [iwlmvm]
iwl_op_mode_mvm_start+0x824/0xa60 [iwlmvm]
iwl_opmode_register+0xd0/0x130 [iwlwifi]
init_module+0x23/0x1000 [iwlmvm]
Fix this by adding the missing rtnl_lock() back to the code.
Fixes: eb09ae93da ("iwlwifi: mvm: load regdomain at INIT stage")
Link: https://lore.kernel.org/lkml/CAHk-=wjB_zBwZ+WR9LOpvgjvaQn=cqryoKigod8QnZs=iYGEhA@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To check beacon protection had a mismatch of the key ID we
currently use the key ID from the firmware, but firmware
side we want to clean up the API to stop reporting this.
Instead, check the IWL_RX_MPDU_STATUS_KEY_VALID bit that
indicates that the firmware used the correct key, and if
that's set but we get invalid MIC/replay use the key ID
from the frame to look up the key and notify mac80211 of
MIC error or replay. Since both keys must have the same
cipher and thus MIC length, we can use either of them to
look up the MIC length.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.30e665d39b07.I78bf7d304ef5a80cecf5fa1c1fca0b51b956cceb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This version adds the following configuration options:
1. Enable/disable setting the session id in the FTM frame
2. Set the BSS color for the responder
3. Set the minimum and maximum time between measurements for
non trigger based NDP ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.0a10d43f3d7f.Ice4112c1910cf94babd1c2d492a3a3de9f7ee6cb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This version adds the following configuration options:
1. Set the BSS color for NDP ranging
2. Set the minimum and maximum time between measurements for
non trigger based NDP ranging.
3. Terminate the session in case the responder requests LMR feedback.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.9dcd5210b7e5.I76f6977cde852de0f251344e279ad85076eef8d6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When P2P roc is removed, the IWL_MVM_STATUS_NEED_FLUSH_P2P bit is set
to indicate to iwl_mvm_roc_done_wk() that the removed roc is a P2P
one, so it will flush the broadcast station and not the aux station.
However, since setting this bit and scheduling the worker is done
in roc ended flow as well as in case the roc is removed, there is
a race where the worker has already started running (but did not
test this bit yet) and then it is scheduled again. In this case,
the first run of the worker will clear this bit, and thus the second
run will find it already cleared and will try to flush and remove
the aux station by mistake.
Fix it by scheduling the worker only if this bit is not yet set. In
case this bit is already set, the worker is either running or
scheduled, so there is no need to re-schedule it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.8c147659b331.If5924375e9bfd46214ab8ab81cb9d0f5c82fbcbc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We used to load the regdomain only in the load stage,
this caused the 'iw phy phy0 reg get' command to fail if we
booted a machine with wifi off.
Therefor we should load it in INIT stage already.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.a6077801d7d5.I7d8d5c895bc467efbf81ea055dde366ea01cced1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We used to read the PPAG, WRDS, EWRD, WGDS tables from ACPI
in the load stage only. This prevented vendor commands from
being executed before bringing the interface up. Move reading those tables
to INIT stage.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.ce3b60f0b426.I3643bf00e714aae930880cc7d6cf390b142eaccb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The new version of the command has same size and layout as
version 10. It just sends corresponding station id in one
of the reserved fields. It's not used in the driver, so just
be ready to accept version 11.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.0a387598eef1.I3be0bbf603ef95c644218be8a12b329411f11646@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The GEO profiles have been stored in single-dimension arrays and the
access has been done via a single index. We will soon need to support
different revisions of this table, which will make the flat array even
harder to handle. To prepare for that, convert the single-dimension
array to a struct with substructures.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.56f3506411a2.I600ed3708d19f2263a5a8d143f6711d08499bbb0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This definition was only used to pass the size of the tables in the FW
API to the iwl_sar_select_profile() function, but we should actually
pass the definition from the FW API file. We don't have the concept
of tables in the ACPI definition, so we can remove it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.00b5084be918.I18efb3c45bffacfa9a356c2c8d34e5ffbb3eb423@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
- Short SSIDs should always be added for direct SSIDs included
in the scan request. However, this was not done in case that
information for collocated APs was included. Fix this.
- With the above fix, if the FW also supports discovery of hidden
APs over the 6GHz band, also set the corresponding full SSID
information.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.02512b7a1443.Ibb023b09b86179ed049a195f4e32e887c2f4971d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When a station is removed, the driver-mac80211 station mapping is removed
before the station is actually deleted from the FW. As a result, it is
reasonable that the FW will continue to pass frames although the driver
doesn't have a station for them anymore. Thus change the message
severity level from ERR to DEBUG_DROP.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.a751177743c6.I5607504dade88ba461508643f58390dd661c05ba@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In later firmware we haven't needed the TSC anyway since
we have it already (and firmware image doesn't change),
but the new version adds the ability to send down replay
counters for more than one GTK. Implement that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.28cd065e8c4a.Ic8406a78ee46b07e0ca1b8199522ef08ec6eef53@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Now that only reprogramming is left in the initial key iteration,
skip it entirely on unified firmware images instead of skipping
only the command sending inside of it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.c6f77325c430.I798ce9d757492a9e3d223c1de5d4e62ebbc00b2c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If we're sending the KEK/KCK data we also need the GTK and
IGTK type, add a separate key iteration for that so we can
make the configure_key iteration optional later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.c99f86423702.Icf7d4e93be77ea05a80235d01851ad0155593de9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We do a key iteration to program the keys, and while at it
we also collect the data necessary for TKIP. This code has
all kinds of dependencies on the firmware API though, so
take out the TKIP phase 1 key generation and do that in a
separate key iteration only if necessary.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.80721fc0fd61.I5a8fbba4e3a9606f700ee41c7a4244dd5e2af935@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's no need for all the complicated conditions here, any
bufferable MMPDUs or MMPDUs for client interfaces are already
coming through the TXQ interface, not iwl_mvm_mac_tx().
Simplify the logic.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.3939f7c5c43a.I1d5cb5262e31a000023d79acbb897b8db50adf0d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Since switching to mac80211 TXQs, we no longer need to
advertise more hardware queues than ACs, since we don't
even set QUEUE_CONTROL anyway, so the vif->hw_queue[]
mapping array won't be used.
All we need (at least for now) is for hw->queues to
indicate that we have enough queues to handle QoS.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.80611a3c1ee7.I8a3d2b269421b6d8bada8c12cce3e095e6cfaeed@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then
queue numbers are just sequentially assigned 0, 1, 2, ...
Prior to TVQM, in DQA, there were some statically allocated
queue numbers:
* IWL_MVM_DQA_AUX_QUEUE == 1,
* both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and
IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and
* IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9.
Now, these values are assigned to the members mvm->aux_queue,
mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by
default. Normally, this doesn't really matter, and if TVQM is
in fact available we override them to the real values after
allocating a queue for use there.
However, this allocation doesn't always happen. For example,
for mvm->p2p_dev_queue (== 2) it only happens when the P2P
Device interface is started, if any. If it's not started, the
value in mvm->p2p_dev_queue remains 2. This wouldn't really
matter all that much if it weren't for iwl_mvm_is_static_queue()
which checks a queue number against one of those four static
numbers.
Now, if no P2P Device or monitor interface is added then queue
2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or
mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously
returns true for it. If it then gets full, all interface queues
are stopped, instead of just backpressuring against the one TXQ
that's really the only affected one.
This clearly can lead to issues, as everything is stopped even
if just a single TXQ filled its corresponding HW queue, if it
happens to have an appropriate number (2 or 9, AUX is always
reassigned.) Due to a mac80211 bug, this also led to a situation
in which the queues remained stopped across a deauthentication
and then attempts to connect to a new AP started failing, but
that's fixed separately.
Fix all of this by simply initializing the queue numbers to
the invalid value until they're used, if TVQM is enabled, and
also setting them back to that value when the queues are later
freed again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The firmware SMPS request should only be honoured if the
connection is currently with HE and on 160 MHz, so check
that and then potentially reapply any request if the BW
changes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.0cdcac5660da.I9ee7956fd4f48399855d1f97728bc58b36caf112@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When installing a (new) key, set the replay counter so that
after FW restart the firmware has the correct value of the
replay counters.
This doesn't have a large effect - for frames that reach
the driver, it will do a replay check, and when installing
a new key, the counter is normally zero to start with (not
for GTK though, if joining the BSS for the first time).
Since this only affects frames handled entirely by the FW,
and that's restricted to a few unicast management frames,
the only affect here is for those after a firmware restart.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.1cedf2ca7bb6.I2e609c28eaa301436e6740f4f1beca838f69a96a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
EAPOL failure results in deauthentication with various reasons, not
related to AUTH failure specifically, so we just merge AUTH failure
with failed to assoc to AP.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2ff350d85eab.I02c5b5d29c0d5c2e014bd1081b07ed33772ae04d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add support for discovery of hidden networks on the 6GHz band,
by including the scan request direct SSIDs in the FW scan request
command:
- In case a short SSID matches one of the direct SSIDs in the scan
request command, add the matching SSID in the same offset in the
'direct_ssids' array.
- Otherwise, add the SSID in one of the available slots.
Additionally, as a preparation to handle hidden APs, refactor
iwl_mvm_umac_scan_cfg_channels_v6_6g() the function.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.ffb540a70212.Ia2bb9bc9435b833820bcc7dc30adcedb5a5a9869@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The scan request processing populated the direct SSIDs
in the FW scan request command also for 6GHz scan, which is not
needed and might result in unexpected behavior.
Fix the code to add the direct SSIDs only in case the scan
is not a 6GHz scan.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.f465937c7bbf.Ic11a1659ddda850c3ec1b1afbe9e2b9577ac1800@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If the firmware crashes while we're already shutting down
the system, there isn't much we can do since the shutdown
process is continuing and we wanted to do that. Don't do
a FW restart, with the implied debug collection, in this
case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.43a7351ae6bd.I164d48ce4379accf76ea0637983fd946d52dc6f5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* aggregation handling improvements for some drivers
* hidden AP discovery on 6 GHz and other HE 6 GHz
improvements
* minstrel improvements for no-ack frames
* deferred rate control for TXQs to improve reaction
times
* virtual time-based airtime scheduler
* along with various little cleanups/fixups
-----BEGIN PGP SIGNATURE-----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=nFvj
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-06-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes berg says:
====================
Lots of changes:
* aggregation handling improvements for some drivers
* hidden AP discovery on 6 GHz and other HE 6 GHz
improvements
* minstrel improvements for no-ack frames
* deferred rate control for TXQs to improve reaction
times
* virtual time-based airtime scheduler
* along with various little cleanups/fixups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We have mgd_prepare_tx(), but sometimes drivers may want/need
to take action when the exchange finishes, whether successfully
or not.
Add a notification to the driver on completion, i.e. call the
new method mgd_complete_tx().
To unify the two scenarios, and to add more information, make
both of them take a struct that has the duration (prepare only),
subtype (both) and success (complete only).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sending nulldata packets is important for sw AP link probing and detecting
4-address mode links. The checks that dropped these packets were apparently
added to work around an iwlwifi firmware bug with multi-TID aggregation.
Fixes: 41cbb0f5a2 ("mac80211: add support for HE")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
