platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 1159788592 ("i825xx: Move the Intel 82586/82593/82596 based drivers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit adeef3e321 ("net: constify netdev->dev_addr") the bmac
driver no longer builds with the following errors (pmac32_defconfig):
linux/drivers/net/ethernet/apple/bmac.c: In function ‘bmac_probe’:
linux/drivers/net/ethernet/apple/bmac.c:1287:20: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)j)’
1287 | dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
| ^
Fix it by making the modifications to a local macaddr variable and then
passing that to eth_hw_addr_set().
We don't use the existing addr variable because the bitrev8() would
mutate it, but it is already used unreversed later in the function.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit adeef3e321 ("net: constify netdev->dev_addr") the mace
driver no longer builds with various errors (pmac32_defconfig):
linux/drivers/net/ethernet/apple/mace.c: In function ‘mace_probe’:
linux/drivers/net/ethernet/apple/mace.c:170:20: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)j)’
170 | dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
| ^
linux/drivers/net/ethernet/apple/mace.c: In function ‘mace_reset’:
linux/drivers/net/ethernet/apple/mace.c:349:32: warning: passing argument 2 of ‘__mace_set_address’ discards ‘const’ qualifier from pointer target type
349 | __mace_set_address(dev, dev->dev_addr);
| ~~~^~~~~~~~~~
linux/drivers/net/ethernet/apple/mace.c:93:62: note: expected ‘void *’ but argument is of type ‘const unsigned char *’
93 | static void __mace_set_address(struct net_device *dev, void *addr);
| ~~~~~~^~~~
linux/drivers/net/ethernet/apple/mace.c: In function ‘__mace_set_address’:
linux/drivers/net/ethernet/apple/mace.c:388:36: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)i)’
388 | out_8(&mb->padr, dev->dev_addr[i] = p[i]);
| ^
Fix it by making the modifications to a local macaddr variable and then
passing that to eth_hw_addr_set(), as well as adding some missing const
qualifiers.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver neglects to check the result of platform_get_irq_optional()'s
call and blithely passes the negative error codes to devm_request_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL.
Stop calling devm_request_irq() with the invalid IRQ #s.
Fixes: 8562056f26 ("net: bcmgenet: request Wake-on-LAN interrupt")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Substantially all bug fixes and cleanups:
- Update drivers to use common helpers for GUIDs, pkeys, bitmaps,
memset_startat, and others
- General code cleanups from bots
- Simplify some of the rxe pool code in preparation for a larger rework
- Clean out old stuff from hns, including all support for hip06 devices
- Fix a bug where GID table entries could be missed if the table had holes
in it
- Rename paths and sessions in rtrs for better understandability
- Consolidate the roce source port selection code
- NDR speed support in mlx5
-----BEGIN PGP SIGNATURE-----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=EL3r
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Another small cycle. Mostly cleanups and bug fixes, quite a bit
assisted from bots. There are a few new syzkaller splats that haven't
been solved yet but they should get into the rcs in a few weeks, I
think.
Summary:
- Update drivers to use common helpers for GUIDs, pkeys, bitmaps,
memset_startat, and others
- General code cleanups from bots
- Simplify some of the rxe pool code in preparation for a larger
rework
- Clean out old stuff from hns, including all support for hip06
devices
- Fix a bug where GID table entries could be missed if the table had
holes in it
- Rename paths and sessions in rtrs for better understandability
- Consolidate the roce source port selection code
- NDR speed support in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (83 commits)
RDMA/irdma: Remove the redundant return
RDMA/rxe: Use the standard method to produce udp source port
RDMA/irdma: Make the source udp port vary
RDMA/hns: Replace get_udp_sport with rdma_get_udp_sport
RDMA/core: Calculate UDP source port based on flow label or lqpn/rqpn
IB/qib: Fix typos
RDMA/rtrs-clt: Rename rtrs_clt to rtrs_clt_sess
RDMA/rtrs-srv: Rename rtrs_srv to rtrs_srv_sess
RDMA/rtrs-clt: Rename rtrs_clt_sess to rtrs_clt_path
RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path
RDMA/rtrs: Rename rtrs_sess to rtrs_path
RDMA/hns: Modify the hop num of HIP09 EQ to 1
IB/iser: Align coding style across driver
IB/iser: Remove un-needed casting to/from void pointer
IB/iser: Don't suppress send completions
IB/iser: Rename ib_ret local variable
IB/iser: Fix RNR errors
IB/iser: Remove deprecated pi_guard module param
IB/mlx5: Expose NDR speed through MAD
RDMA/cxgb4: Set queue pair state when being queried
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmHbZ+YeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDs4H/RgC8JOV3Dki1VtO
6OwPxUKKojhVU9LJis7kyG5voB/zE7tK5nI+jC3gYGQUFKWaZ3YY8s3UcV1zvg/b
a44b91boA+dKxEwOq4RZNQ9mU+QWnNoG5+UqBkmB8vewi3QC3T8xEmpWcERLbU7d
KrI2T6i4ksJ9OYSYMEMyrvrpt7nt3n1tDX8b71faXjf1zbLeGo9zT53t6BJ/LknV
AK406Eq/3bg36OZrKFuG7hCJfRE/cSlxF9bxK3sIfMBMQ2YPe1S5+pxl5iBD0nyl
NaHOBYcLTxPAne3YgIvK0zDdsS+EtPSlaVdWfSmNjQhX2vqEixldgdrOCmwp37vd
3gV9D28=
=hrOo
-----END PGP SIGNATURE-----
Merge tag 'v5.16' into rdma.git for-next
To resolve minor conflict in:
drivers/infiniband/hw/mlx5/mlx5_ib.h
By merging both hunks.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Treewide cleanup and consolidation of MSI interrupt handling in
preparation for further changes in this area which are necessary to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space
-----BEGIN PGP SIGNATURE-----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=vKzd
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
Core:
- Provide a new interface for affinity hints to provide a separation
between hint and actual affinity change which has become a hidden
property of the current interface
- Fix up the in tree usage of the affinity hint interfaces
Drivers:
- No new irqchip drivers!
- Fix GICv3 redistributor table reservation with RT across kexec
- Fix GICv4.1 redistributor view of the VPE table across kexec
- Add support for extra interrupts on spear-shirq
- Make obtaining some interrupts optional for the Renesas drivers
- Various cleanups and bug fixes
-----BEGIN PGP SIGNATURE-----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=myJA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Provide a new interface for affinity hints to provide a separation
between hint and actual affinity change which has become a hidden
property of the current interface
- Fix up the in tree usage of the affinity hint interfaces
Drivers:
- No new irqchip drivers!
- Fix GICv3 redistributor table reservation with RT across kexec
- Fix GICv4.1 redistributor view of the VPE table across kexec
- Add support for extra interrupts on spear-shirq
- Make obtaining some interrupts optional for the Renesas drivers
- Various cleanups and bug fixes"
* tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt
irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt
irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time
irqchip/ingenic-tcu: Use correctly sized arguments for bit field
irqchip/gic-v2m: Add const to of_device_id
irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init
irqchip/spear-shirq: Add support for IRQ 0..6
irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime
irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve
irqchip/gic-v3-its: Give the percpu rdist struct its own flags field
net/mlx4: Use irq_update_affinity_hint()
net/mlx5: Use irq_set_affinity_and_hint()
hinic: Use irq_set_affinity_and_hint()
scsi: lpfc: Use irq_set_affinity()
mailbox: Use irq_update_affinity_hint()
ixgbe: Use irq_update_affinity_hint()
be2net: Use irq_update_affinity_hint()
enic: Use irq_update_affinity_hint()
RDMA/irdma: Use irq_update_affinity_hint()
scsi: mpt3sas: Use irq_set_affinity_and_hint()
...
Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant
subsystems all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd7deA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym8ngCgw0ANwrRPE5b1dthEmfU2f8Knk5kAn0pHQv6R
VRZJypgNfU/Pt0ykstZD
=CO9J
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
* Reverse xmas tree variables order
* User friendly messages on error paths
* Refactor __prestera_inetaddr_event to use early return
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20220111011051.4941-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for OX810SE dwmac glue setup, which is a simplified version
of the OX820 introduced later with more control on the PHY interface.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mask the ECN bits before calling mlx5e_route_lookup_ipv4_get(). The
tunnel key might have the last ECN bit set. This interferes with the
route lookup process as ip_route_output_key_hash() interpretes this bit
specially (to restrict the route scope).
Found by code inspection, compile tested only.
Fixes: c7b9038d8a ("net/mlx5e: TC preparation refactoring for routing update event")
Fixes: 9a941117fb ("net/mlx5e: Maximize ip tunnel key usage on the TC offloading path")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mask the ECN bits before calling ip_route_output_ports(). The tos
variable might be passed directly from an IPv4 header, so it may have
the last ECN bit set. This interferes with the route lookup process as
ip_route_output_key_hash() interpretes this bit specially (to restrict
the route scope).
Found by code inspection, compile tested only.
Fixes: 804c2f3e36 ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch remove magic numbers in sun4i-emac.c and replace with macros
defined in sun4i-emac.h
Signed-off-by: Conley Lee <conleylee@foxmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/tencent_71466C2135CD1780B19D7844BE3F167C940A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 6bf950a8ff.
To align with other vendors, NET_VENDOR configs are supposed to be ON by
default, while their drivers should default to OFF.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220110205246.66298-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano).
-----BEGIN PGP SIGNATURE-----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=1egI
-----END PGP SIGNATURE-----
Merge tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most signigicant change here is the addition of a new cpufreq
'P-state' driver for AMD processors as a better replacement for the
venerable acpi-cpufreq driver.
There are also other cpufreq updates (in the core, intel_pstate, ARM
drivers), PM core updates (mostly related to adding new macros for
declaring PM operations which should make the lives of driver
developers somewhat easier), and a bunch of assorted fixes and
cleanups.
Summary:
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas
Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector
Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano)"
* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
cpuidle: use default_groups in kobj_type
x86: intel_epb: Allow model specific normal EPB value
MAINTAINERS: Add AMD P-State driver maintainer entry
Documentation: amd-pstate: Add AMD P-State driver introduction
cpufreq: amd-pstate: Add AMD P-State performance attributes
cpufreq: amd-pstate: Add AMD P-State frequencies attributes
cpufreq: amd-pstate: Add boost mode support for AMD P-State
cpufreq: amd-pstate: Add trace for AMD P-State module
cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
cpufreq: amd-pstate: Add fast switch function for AMD P-State
cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
ACPI: CPPC: Add CPPC enable register function
ACPI: CPPC: Check present CPUs for determining _CPC is valid
ACPI: CPPC: Implement support for SystemIO registers
x86/msr: Add AMD CPPC MSR definitions
x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
cpufreq: use default_groups in kobj_type
...
Merge cpuidle updates, PM core updates and one hiberation-related
update for 5.17-rc1:
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
* pm-cpuidle:
cpuidle: use default_groups in kobj_type
cpuidle: Fix cpuidle_remove_state_sysfs() kerneldoc comment
cpuidle: menu: Fix typo in a comment
* pm-core:
PM: runtime: Simplify locking in pm_runtime_put_suppliers()
mmc: mxc: Use the new PM macros
mmc: jz4740: Use the new PM macros
PM: runtime: Add safety net to supplier device release
PM: runtime: Capture device status before disabling runtime PM
PM: core: Add new *_PM_OPS macros, deprecate old ones
PM: core: Redefine pm_ptr() macro
r8169: Avoid misuse of pm_ptr() macro
* pm-sleep:
PM: hibernate: Allow ACPI hardware signature to be honoured
As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
Moreover, dma_set_mask_and_coherent() returns 0 or -EIO, so the return
code of the function can be used directly.
Finally, inline bnx2x_set_coherency_mask() because it is now only a wrapper
for a single dma_set_mask_and_coherent() call.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/29608a525876afddceabf8f11b2ba606da8748fc.1641730747.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
Moreover, dma_set_mask_and_coherent() returns 0 or -EIO, so the return
code of the function can be used directly. There is no need to 'rc = -EIO'
explicitly.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/b9aa46e7e5a5aa61f56aac5ea439930f41ad9946.1641726804.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So if dma_set_mask_and_coherent() succeeds, 'netdev->features' will have
NETIF_F_HIGHDMA in all cases. Move the assignment of this feature in
be_netdev_init() instead be_probe() which is a much logical place.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/637696d7141faa68c29fc34b70f9aa67d5e605f0.1641718999.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As stated in [1], dma_set_mask() with a 64-bit mask will never fail if
dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So, if dma_set_mask_and_coherent() succeeds, 'using_dac' is known to be
'true'. This variable can be removed.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/1d5a7b3f4fa735f1233c3eb3fa07e71df95fad75.1641658516.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As stated in [1], dma_set_mask() with a 64-bit mask will never fail if
dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
If dma_set_mask_and_coherent() succeeds, 'ap->pci_using_dac' is known to be
1. So 'pci_using_dac' can be removed from the 'struct ace_private'.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/1a414c05c27b21c661aef61dffe1adcd1578b1f5.1641651917.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As stated in [1], dma_set_mask() with a 64-bit mask will never fail if
dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So qlcnic_set_dma_mask(), (in qlcnic_main.c) can be simplified a lot and
inlined directly in its only caller.
If dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1.
So it can be removed from all the calling chain.
qlcnic_setup_netdev() can finally be simplified as-well.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4996ab0337d62ec6a54b2edf234cd5ced4b4d7ad.1641649611.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees reports quoted commit introduced the following warning on arm64:
drivers/net/ethernet/allwinner/sun4i-emac.c:922:60: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
922 | netdev_info(ndev, "get io resource from device: 0x%x, size = %u\n",
| ~^
| | | unsigned int
| %llx
923 | regs->start, resource_size(regs));
| ~~~~~~~~~~~
| |
| resource_size_t {aka long long unsigned int}
.. and another one like that for resource_size().
Switch to %pa and a cast.
Reported-by: Kees Cook <keescook@chromium.org>
Fixes: 47869e82c8 ("sun4i-emac.c: add dma support")
Link: https://lore.kernel.org/r/20220108034438.2227343-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Build bot reports:
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c: In function 'fec_set_block_stats':
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c:1235:48: error: 'outl' undeclared (first use in this function); did you mean 'out'?
1235 | if (mlx5_core_access_reg(mdev, in, sz, outl, sz, MLX5_REG_PPCNT, 0, 0))
| ^~~~
| out
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220109213321.2292830-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While it has always been possible to infer that an HWRM command was
abandoned due to an unhealthy firmware status by the shortened timeout
reported, this change improves the log messaging to account for this
case explicitly. In the interests of further clarity, the firmware
status is now also reported in these new messages.
v2: Remove inline keyword for hwrm_wait_must_abort() in .c file.
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some older devices cannot accommodate the 40 seconds timeout
cap for long running commands (such as NVRAM commands) due to
hardware limitations. Allow these devices to request more time for
these long running commands, but print a warning, since the longer
timeout may cause the hung task watchdog to trigger. In the case of a
firmware update operation, this is preferable to failing outright.
v2: Use bp->hwrm_cmd_max_timeout directly without the constants.
Fixes: 881d8353b0 ("bnxt_en: Add an upper bound for all firmware command timeouts.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current driver design relies on the PF netdev being open in order
to intercept the following HWRM commands from a VF:
- HWRM_FUNC_VF_CFG
- HWRM_CFA_L2_FILTER_ALLOC
- HWRM_PORT_PHY_QCFG (only if FW_CAP_LINK_ADMIN is not supported)
If the PF is closed, then VFs are subjected to rather inscrutable error
messages in response to any configuration requests involving the above
command types. Recent firmware distinguishes this problem case from
other errors by returning HWRM_ERR_CODE_PF_UNAVAILABLE. In most cases,
the appropriate course of action is still to fail, but this can now be
accomplished with the aid of more user informative log messages. For L2
filter allocations that are already asynchronous, an automatic retry
seems more appropriate.
v2: Delete extra newline.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add logging of firmware messages. These can be useful for diagnosing
issues in the field, but due to their verbosity are only appropriate
at a debug message level.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create an inline function for resetting the driver
to reduce code duplication.
Signed-off-by: Nati Koler <nkoler@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changed bad_csum to csum_bad to align with csum_unchecked & csum_good
Signed-off-by: Nati Koler <nkoler@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add qid and req_id to error prints when ENA_REGS_RESET_INV_TX_REQ_ID
reset occurs.
Switch from %hu to %u, since u16 should be printed with %u, as
explained in [1].
[1] - https://www.kernel.org/doc/html/latest/core-api/printk-formats.html
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This struct was used to pass data from callee function to its caller.
Its usage can be avoided.
Removing it results in less code without any damage to code readability.
Also it allows to consolidate ring size calculation into a single
function (ena_calc_io_queue_size()).
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The print that indicates that device reset has finished is
currently called from ena_restore_device().
Move it to ena_fw_reset_device() as it is the more natural
location for it.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ena_com_indirect_table_fill_entry() function only returns -EINVAL
or 0, no need to check for -EOPNOTSUPP.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the capabilities field to query the device for ENI stats
support.
This replaces the previous method that tried to get the ENI stats
during ena_probe() and used the success or failure as an indication
for support by the device.
Remove eni_stats_supported field from struct ena_adapter. This field
was used for the previous method of queriying for ENI stats support.
Change the severity level of the print in case of
ena_com_get_eni_stats() failure from info to error.
With the previous method of querying form ENI stats support, failure
to get ENI stats was normal for devices that don't support it.
With the use of the capabilities field such a failure is unexpected,
as it is called only if the device reported that it supports ENI
stats.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This bitmask field indicates what capabilities are supported by the
device.
The capabilities field differs from the 'supported_features' field which
indicates what sub-commands for the set/get feature commands are
supported. The sub-commands are specified in the 'feature_id' field of
the 'ena_admin_set_feat_cmd' struct in the following way:
struct ena_admin_set_feat_cmd cmd;
cmd.aq_common_descriptor.opcode = ENA_ADMIN_SET_FEATURE;
cmd.feat_common.feature_
The 'capabilities' field, on the other hand, specifies different
capabilities of the device. For example, whether the device supports
querying of ENI stats.
Also add an enumerator which contains all the capabilities. The
first added capability macro is for ENI stats feature.
Capabilities are queried along with the other device attributes (in
ena_com_get_dev_attr_feat()) during device initialization and are stored
in the ena_com_dev struct. They can be later queried using the
ena_com_get_cap() helper function.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ena_calc_io_queue_size() always returns 0, therefore make it a
void function and update the calling function to stop checking
the return value.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for flushing the MAC table on a given port in the ocelot
switch library, and use this functionality in the felix DSA driver.
This operation is needed when a port leaves a bridge to become
standalone, and when the learning is disabled, and when the STP state
changes to a state where no FDB entry should be present.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220107144229.244584-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Assuming the test setup described here:
https://patchwork.kernel.org/project/netdevbpf/cover/20210205130240.4072854-1-vladimir.oltean@nxp.com/
(swp1 and swp2 are in bond0, and bond0 is in a bridge with swp0)
it can be seen that when swp1 goes down (on either board A or B), then
traffic that should go through that port isn't forwarded anywhere.
A dump of the PGID table shows the following:
PGID_DST[0] = ports 0
PGID_DST[1] = ports 1
PGID_DST[2] = ports 2
PGID_DST[3] = ports 3
PGID_DST[4] = ports 4
PGID_DST[5] = ports 5
PGID_DST[6] = no ports
PGID_AGGR[0] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[1] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[2] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[3] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[4] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[5] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[6] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[7] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[8] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[9] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[10] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[11] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[12] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[13] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[14] = ports 0, 1, 2, 3, 4, 5
PGID_AGGR[15] = ports 0, 1, 2, 3, 4, 5
PGID_SRC[0] = ports 1, 2
PGID_SRC[1] = ports 0
PGID_SRC[2] = ports 0
PGID_SRC[3] = no ports
PGID_SRC[4] = no ports
PGID_SRC[5] = no ports
PGID_SRC[6] = ports 0, 1, 2, 3, 4, 5
Whereas a "good" PGID configuration for that setup should have looked
like this:
PGID_DST[0] = ports 0
PGID_DST[1] = ports 1, 2
PGID_DST[2] = ports 1, 2
PGID_DST[3] = ports 3
PGID_DST[4] = ports 4
PGID_DST[5] = ports 5
PGID_DST[6] = no ports
PGID_AGGR[0] = ports 0, 2, 3, 4, 5
PGID_AGGR[1] = ports 0, 2, 3, 4, 5
PGID_AGGR[2] = ports 0, 2, 3, 4, 5
PGID_AGGR[3] = ports 0, 2, 3, 4, 5
PGID_AGGR[4] = ports 0, 2, 3, 4, 5
PGID_AGGR[5] = ports 0, 2, 3, 4, 5
PGID_AGGR[6] = ports 0, 2, 3, 4, 5
PGID_AGGR[7] = ports 0, 2, 3, 4, 5
PGID_AGGR[8] = ports 0, 2, 3, 4, 5
PGID_AGGR[9] = ports 0, 2, 3, 4, 5
PGID_AGGR[10] = ports 0, 2, 3, 4, 5
PGID_AGGR[11] = ports 0, 2, 3, 4, 5
PGID_AGGR[12] = ports 0, 2, 3, 4, 5
PGID_AGGR[13] = ports 0, 2, 3, 4, 5
PGID_AGGR[14] = ports 0, 2, 3, 4, 5
PGID_AGGR[15] = ports 0, 2, 3, 4, 5
PGID_SRC[0] = ports 1, 2
PGID_SRC[1] = ports 0
PGID_SRC[2] = ports 0
PGID_SRC[3] = no ports
PGID_SRC[4] = no ports
PGID_SRC[5] = no ports
PGID_SRC[6] = ports 0, 1, 2, 3, 4, 5
In other words, in the "bad" configuration, the attempt is to remove the
inactive swp1 from the destination ports via PGID_DST. But when a MAC
table entry is learned, it is learned towards PGID_DST 1, because that
is the logical port id of the LAG itself (it is equal to the lowest
numbered member port). So when swp1 becomes inactive, if we set
PGID_DST[1] to contain just swp1 and not swp2, the packet will not have
any chance to reach the destination via swp2.
The "correct" way to remove swp1 as a destination is via PGID_AGGR
(remove swp1 from the aggregation port groups for all aggregation
codes). This means that PGID_DST[1] and PGID_DST[2] must still contain
both swp1 and swp2. This makes the MAC table still treat packets
destined towards the single-port LAG as "multicast", and the inactive
ports are removed via the aggregation code tables.
The change presented here is a design one: the ocelot_get_bond_mask()
function used to take an "only_active_ports" argument. We don't need
that. The only call site that specifies only_active_ports=true,
ocelot_set_aggr_pgids(), must retrieve the entire bonding mask, because
it must program that into PGID_DST. Additionally, it must also clear the
inactive ports from the bond mask here, which it can't do if bond_mask
just contains the active ports:
ac = ocelot_read_rix(ocelot, ANA_PGID_PGID, i);
ac &= ~bond_mask; <---- here
/* Don't do division by zero if there was no active
* port. Just make all aggregation codes zero.
*/
if (num_active_ports)
ac |= BIT(aggr_idx[i % num_active_ports]);
ocelot_write_rix(ocelot, ac, ANA_PGID_PGID, i);
So it becomes the responsibility of ocelot_set_aggr_pgids() to take
ocelot_port->lag_tx_active into consideration when populating the
aggr_idx array.
Fixes: 23ca3b727e ("net: mscc: ocelot: rebalance LAGs on link up/down events")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220107164332.402133-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable `ret_code' used for returning is never changed in function
`iavf_shutdown_adminq'. So that it can be removed and just return its
initial value 0 at the end of `iavf_shutdown_adminq' function.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The code that uses variables pe_cntx_size and pe_filt_size
has been removed, so they should be removed as well.
Eliminate the following clang warnings:
drivers/net/ethernet/intel/i40e/i40e_common.c:4139:20:
warning: variable 'pe_filt_size' set but not used.
drivers/net/ethernet/intel/i40e/i40e_common.c:4139:6:
warning: variable 'pe_cntx_size' set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove non-inclusive language from the driver.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The i40e_asq_send_command will now use a non blocking usleep_range if
possible (non-atomic context), instead of busy-waiting udelay. The
usleep_range function uses hrtimers to provide better performance and
removes the negative impact of busy-waiting in time-critical
environments.
1. Rename i40e_asq_send_command to i40e_asq_send_command_atomic
and add 5th parameter to inform if called from an atomic context.
Call inside usleep_range (if non-atomic) or udelay (if atomic).
2. Change i40e_asq_send_command to invoke
i40e_asq_send_command_atomic(..., false).
3. Change two functions:
- i40e_aq_set_vsi_uc_promisc_on_vlan
- i40e_aq_set_vsi_mc_promisc_on_vlan
to explicitly use i40e_asq_send_command_atomic(..., true)
instead of i40e_asq_send_command, as they use spinlocks and do some
work in an atomic context.
All other calls to i40e_asq_send_command remain unchanged.
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Trusted VF can use up every resource available, leaving nothing
to other trusted VFs.
Introduce define, which calculates MacVlan resources available based
on maximum available MacVlan resources, bare minimum for each VF and
number of currently allocated VFs.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a VF is removed respective PTP resources are not
being freed currently. This patch fixes it.
Fixes: 43510ef4dd ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF")
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before using the ptp pci device by AF driver increment
the reference count of it.
Fixes: a8b90c9d26 ("octeontx2-af: Add PTP device id for CN10K and 95O silcons")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Expose FEC per lane block counters via ethtool
2) Trivial fixes/updates/cleanup to mlx5e netdev driver
3) Fix htmldoc build warning
4) Spread mlx5 SFs (sub-functions) to all available CPU cores: Commits 1..5
Shay Drory Says:
================
Before this patchset, mlx5 subfunction shared the same IRQs (MSI-X) with
their peers subfunctions, causing them to use same CPU cores.
In large scale, this is very undesirable, SFs use small number of cpu
cores and all of them will be packed on the same CPU cores, not
utilizing all CPU cores in the system.
In this patchset we want to achieve two things.
a) Spread IRQs used by SFs to all cpu cores
b) Pack less SFs in the same IRQ, will result in multiple IRQs per core.
In this patchset, we spread SFs over all online cpus available to mlx5
irqs in Round-Robin manner. e.g.: Whenever a SF is created, pick the next
CPU core with least number of SF IRQs bound to it, SFs will share IRQs on
the same core until a certain limit, when such limit is reached, we
request a new IRQ and add it to that CPU core IRQ pool, when out of IRQs,
pick any IRQ with least number of SF users.
This enhancement is done in order to achieve a better distribution of
the SFs over all the available CPUs, which reduces application latency,
as shown bellow.
Machine details:
Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz with 56 cores.
PCI Express 3 with BW of 126 Gb/s.
ConnectX-5 Ex; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe4.0
x16.
Base line test description:
Single SF on the system. One instance of netperf is running on-top the
SF.
Numbers: latency = 15.136 usec, CPU Util = 35%
Test description:
There are 250 SFs on the system. There are 3 instances of netperf
running, on-top three different SFs, in parallel.
Perf numbers:
# netperf SFs latency(usec) latency CPU utilization
affinity affinity (lower is better) increase %
1 cpu=0 cpu={0} ~23 (app 1-3) 35% 75%
2 cpu=0,2,4 cpu={0} app 1: 21.625 30% 68% (CPU 0)
app 2-3: 16.5 9% 15% (CPU 2,4)
3 cpu=0 cpu={0,2,4} app 1: ~16 7% 84% (CPU 0)
app 2-3: ~17.9 14% 22% (CPU 2,4)
4 cpu=0,2,4 cpu={0,2,4} 15.2 (app 1-3) 0% 33% (CPU 0,2,4)
- The first two entries (#1 and #2) show current state. e.g.: SFs are
using the same CPU. The last two entries (#3 and #4) shows the latency
reduction improvement of this patch. e.g.: SFs are on different CPUs.
- Whenever we use several CPUs, in case there is a different CPU
utilization, write the utilization of each CPU separately.
- Whenever the latency result of the netperf instances were different,
write the latency of each netperf instances separately.
Commands:
- for netperf CPU=0:
$ for i in {1..3}; do taskset -c 0 netperf -H 1${i}.1.1.1 -t TCP_RR -- \
-o RT_LATENCY -r8 & done
- for netperf CPU=0,2,4
$ for i in {1..3}; do taskset -c $(( ($i - 1) * 2 )) netperf -H \
1${i}.1.1.1 -t TCP_RR -- -o RT_LATENCY -r8 & done
================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmHXh+AACgkQSD+KveBX
+j68fQgAghUX4TFS2JSwa7+XSCtzz7GIu2Xrz8aWTAnydRLlNXuFuuHYcNed6I0l
7DaVOZwHp1tp3tnx3WMGPUU6ujDPEgasaDDblvG2UXix5LPVEHDXY44ittQX8mpC
SC8Yj9mNo6DSfOMUZklFDMbw57XuLJ+HEGnwnrOEEyLX7ruDXGEViUmVBd4IoC3B
F2fJHBkdTJfHWTJRB4pWbZD1dw7WbKd0RyPla3OkoHugEUCKnbjii8cMwNM64Bbp
Pjz/SiShVy+NTotqPzRNjcx7y4tHOXCYt33zt1VlGtdUxs5eCA5jkjHFz0jb12Lu
rvfHaBaU+elMKTw5G/WMGJxZQx0kEQ==
=VBWY
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2022-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-01-06
1) Expose FEC per lane block counters via ethtool
2) Trivial fixes/updates/cleanup to mlx5e netdev driver
3) Fix htmldoc build warning
4) Spread mlx5 SFs (sub-functions) to all available CPU cores: Commits 1..5
Shay Drory Says:
================
Before this patchset, mlx5 subfunction shared the same IRQs (MSI-X) with
their peers subfunctions, causing them to use same CPU cores.
In large scale, this is very undesirable, SFs use small number of cpu
cores and all of them will be packed on the same CPU cores, not
utilizing all CPU cores in the system.
In this patchset we want to achieve two things.
a) Spread IRQs used by SFs to all cpu cores
b) Pack less SFs in the same IRQ, will result in multiple IRQs per core.
In this patchset, we spread SFs over all online cpus available to mlx5
irqs in Round-Robin manner. e.g.: Whenever a SF is created, pick the next
CPU core with least number of SF IRQs bound to it, SFs will share IRQs on
the same core until a certain limit, when such limit is reached, we
request a new IRQ and add it to that CPU core IRQ pool, when out of IRQs,
pick any IRQ with least number of SF users.
This enhancement is done in order to achieve a better distribution of
the SFs over all the available CPUs, which reduces application latency,
as shown bellow.
Machine details:
Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz with 56 cores.
PCI Express 3 with BW of 126 Gb/s.
ConnectX-5 Ex; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe4.0
x16.
Base line test description:
Single SF on the system. One instance of netperf is running on-top the
SF.
Numbers: latency = 15.136 usec, CPU Util = 35%
Test description:
There are 250 SFs on the system. There are 3 instances of netperf
running, on-top three different SFs, in parallel.
Perf numbers:
# netperf SFs latency(usec) latency CPU utilization
affinity affinity (lower is better) increase %
1 cpu=0 cpu={0} ~23 (app 1-3) 35% 75%
2 cpu=0,2,4 cpu={0} app 1: 21.625 30% 68% (CPU 0)
app 2-3: 16.5 9% 15% (CPU 2,4)
3 cpu=0 cpu={0,2,4} app 1: ~16 7% 84% (CPU 0)
app 2-3: ~17.9 14% 22% (CPU 2,4)
4 cpu=0,2,4 cpu={0,2,4} 15.2 (app 1-3) 0% 33% (CPU 0,2,4)
- The first two entries (#1 and #2) show current state. e.g.: SFs are
using the same CPU. The last two entries (#3 and #4) shows the latency
reduction improvement of this patch. e.g.: SFs are on different CPUs.
- Whenever we use several CPUs, in case there is a different CPU
utilization, write the utilization of each CPU separately.
- Whenever the latency result of the netperf instances were different,
write the latency of each netperf instances separately.
Commands:
- for netperf CPU=0:
$ for i in {1..3}; do taskset -c 0 netperf -H 1${i}.1.1.1 -t TCP_RR -- \
-o RT_LATENCY -r8 & done
- for netperf CPU=0,2,4
$ for i in {1..3}; do taskset -c $(( ($i - 1) * 2 )) netperf -H \
1${i}.1.1.1 -t TCP_RR -- -o RT_LATENCY -r8 & done
================
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-01-06
Victor adds restoring of advanced rules after reset.
Wojciech improves usage of switchdev control VSI by utilizing the
device's advanced rules for forwarding.
Christophe Jaillet removes some unneeded calls to zero bitmaps, changes
some bitmap operations that don't need to be atomic, and converts a
kfree() to a more appropriate bitmap_free().
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Use bitmap_free() to free bitmap
ice: Optimize a few bitmap operations
ice: Slightly simply ice_find_free_recp_res_idx
ice: improve switchdev's slow-path
ice: replay advanced rules after reset
====================
Link: https://lore.kernel.org/r/20220106183013.3777622-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend existing driver for Spectrum, Spectrum-2 and Spectrum-3 ASICs
to support Spectrum-4 ASIC as well.
Currently there is no released firmware version for Spectrum-4, so the
driver is not enforcing a minimum version.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Spectrum-4 will calculate hash function for bloom filter differently
from the existing ASICs.
First, two hash functions will be used to calculate 16 bits result.
The final result will be combination of the two results - 6 bits which
are result of CRC-6 will be used as MSB and 10 bits which are result of
CRC-10 will be used as LSB.
Second, while in Spectrum{2,3}, there is a padding in each chunk, so the
chunks use a sequence of whole bytes, in Spectrum-4 there is no padding,
so each chunk use 20 bytes minus 2 bits, so it is necessary to align the
chunks to be without holes.
Add dedicated 'mlxsw_sp_acl_bf_ops' for Spectrum-4 and add the required
tables for CRC calculations.
All the details are documented as part of the code for future use.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Spectrum-4 will calculate hash function for bloom filter differently from
the existing ASICs.
There are two changes:
1. Instead of using one hash function to calculate 16 bits output (CRC-16),
two functions will be used.
2. The chunks will be built differently, without padding.
As preparation for support of Spectrum-4 bloom filter, add 'ops'
structure to allow handling different calculation for different ASICs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Spectrum-4 will calculate hash function for bloom filter differently from
the existing ASICs.
There are two changes:
1. Instead of using one hash function to calculate 16 bits output (CRC-16),
two functions will be used.
2. The chunks will be built differently, without padding.
As preparation for support of Spectrum-4 bloom filter, rename CRC table
to include "sp2" prefix and "crc16", as next patch will add two additional
tables. In addition, rename all the dedicated functions and defines for
Spectrum-{2,3} to include "sp2" prefix.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Spectrum-4 will calculate hash function for bloom filter differently from
the existing ASICs.
One of the changes is related to the way that the chunks will be build -
without padding.
As preparation for support of Spectrum-4 bloom filter, make
mlxsw_sp_acl_bf_key_encode() more flexible, so it will be able to use it
for Spectrum-4 as well.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, mlxsw_sp_acl_bf_rule_count_index_get() is implemented before
mlxsw_sp_acl_bf_index_get() but is used after it.
Adding a new function for Spectrum-4 would make them further apart still.
Fix by moving them around.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Spectrum-4 ASIC will support more virtual routers and local ports
compared to the existing ASICs. Therefore, the virtual router and local
port ACL key elements need to be increased.
Introduce new key elements for Spectrum-4 to be aligned with the elements
used already for other Spectrum ASICs.
The key blocks layout is the same for Spectrum-4, so use the existing
code for encode_block() and clear_block(), just create separate blocks.
Note that size of `VIRT_ROUTER_MSB` is 4 bits in Spectrum-4,
therefore declare it using `MLXSW_AFK_ELEMENT_INST_U32()`, in order to
be able to set `.avoid_size_check` to true.
Otherwise, `mlxsw_afk_blocks_check()` will fail and warn.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In Spectrum-4, the size of the virtual router ACL key element increased
from 11 bits to 12 bits.
In order to reuse the existing virtual router ACL key element
enumerators for Spectrum-4, rename 'VIRT_ROUTER_8_10' and
'VIRT_ROUTER_0_7' to 'VIRT_ROUTER_MSB' and 'VIRT_ROUTER_LSB',
respectively.
No functional changes intended.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before accessing the port private structure make sure that there is
still a non-NULL pointer there. A NULL pointer access can happen when we
are on the remove path, some switch ports are unregistered and some are
in the process of unregistering.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We could get into a situation when the fwnode of the parent device is
not yet set because its probe didn't yet finish. When this happens, any
caller of the dpaa2_mac_open() will not have the fwnode available, thus
cause problems at the PHY connect time.
Avoid this by just returning -EPROBE_DEFER from the dpaa2_mac_open when
this happens.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parent pointer node handler must be declared with a NULL
initializer. Before using it, a check must be performed to make
sure that a valid address has been assigned to it.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 410bd754cd.
The reverted commit had added a retry mechanism to the command entry
index allocation. The previous patch ensures that there is a free
command entry index once the command work handler holds the command
semaphore. Thus the retry mechanism is not needed.
Fixes: 410bd754cd ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Avoid a race where command work handler may fail to allocate command
entry index, by holding the command semaphore down till command entry
index is being freed.
Fixes: 410bd754cd ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently during NIC profile disablement all VXLAN udp ports offloaded to the
HW are flushed and during its enablement the driver send notification to
the stack to inform the core that the entire UDP tunnel port state has been
lost, uplink representor doesn't have the same behavior which can cause
VXLAN udp ports offload to be in bad state while moving between modes while
VXLAN interface exist.
Fixed by aligning the uplink representor profile behavior to the NIC behavior.
Fixes: 84db661247 ("net/mlx5e: Move set vxlan nic info to profile init")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Even when SF devices are supported, the SF device table allocation
can still fail.
In such case mlx5_sf_dev_supported still reports true, but SF device
table is invalid. This can result in NULL table access.
Hence, fix it by adding NULL table check.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tunnel device follows RFC 6040, and during decapsulation inner
ip_ecn might change depending on inner and outer ip_ecn as follows:
+---------+----------------------------------------+
|Arriving | Arriving Outer Header |
| Inner +---------+---------+---------+----------+
| Header | Not-ECT | ECT(0) | ECT(1) | CE |
+---------+---------+---------+---------+----------+
| Not-ECT | Not-ECT | Not-ECT | Not-ECT | <drop> |
| ECT(0) | ECT(0) | ECT(0) | ECT(1) | CE* |
| ECT(1) | ECT(1) | ECT(1) | ECT(1)* | CE* |
| CE | CE | CE | CE | CE |
+---------+---------+---------+---------+----------+
Cells marked above are changed from original inner packet ip_ecn value.
Tc then matches on the modified inner ip_ecn, but hw offload which
matches the inner ip_ecn value before decap, will fail.
Fix that by mapping all the cases of outer and inner ip_ecn matching,
and only supporting cases where we know inner wouldn't be changed by
decap, or in the outer ip_ecn=CE case, inner ip_ecn didn't matter.
Fixes: bcef735c59 ("net/mlx5e: Offload TC matching on tos/ttl for ip tunnels")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This reverts commit 54e1217b90.
Although the NIC doesn't support offload of outer header CSUM, using
gso_partial_features allows offloading the tunnel's segmentation. The
driver relies on the stack CSUM calculation of the outer header. For
this, NETIF_F_GSO_GRE_CSUM must be a member of the device's features.
Fixes: 54e1217b90 ("net/mlx5e: Block offload of outer header csum for GRE tunnel")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This reverts commit 6d6727dddc.
Although the NIC doesn't support offload of outer header CSUM, using
gso_partial_features allows offloading the tunnel's segmentation. The
driver relies on the stack CSUM calculation of the outer header. For
this, NETIF_F_GSO_UDP_TUNNEL_CSUM must be a member of the device's
features.
Fixes: 6d6727dddc ("net/mlx5e: Block offload of outer header csum for UDP tunnels")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Routes with nexthop objects is currently not supported by multipath offload
and any attempts to use it is blocked, however this also block adding SW
routes with nexthop.
Resolve this by returning NOTIFY_DONE instead of an error which will allow such
a route to be created in SW but not offloaded.
This fix also solve an issue which block adding such routes on different devices
due to missing check if the route FIB device is one of multipath devices.
Fixes: 6a87afc072 ("mlx5: Fail attempts to use routes with nexthop objects")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Driver initiates DMA sync, hence it may skip CPU sync. Add
DMA_ATTR_SKIP_CPU_SYNC as input attribute both to dma_map_page and
dma_unmap_page to avoid redundant sync with the CPU.
When forcing the device to work with SWIOTLB, the extra sync might cause
data corruption. The driver unmaps the whole page while the hardware
used just a part of the bounce buffer. So syncing overrides the entire
page with bounce buffer that only partially contains real data.
Fixes: bc77b240b3 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Fixes: db05815b36 ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The rep legacy RQ completion handling was missing the appropriate
handling of error CQEs (dump the CQE and queue a recover work), fix it
by calling trigger_report() when needed.
Since all CQE handling flows do the exact same error CQE handling,
extract it to a common helper function.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove redundant and trivial error logging when trying to
offload mirred device with unsupported devices.
Using OVS could hit those a lot and the errors are still
logged in extack.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Feature dependencies should be resolved in fix features rather than in
set features flow. Move the check that disables HW-GRO in case CQE
compression is enabled from set_feature_hw_gro() to
mlx5e_fix_features().
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove redundant space when constructing the feature's enum. Validate
against the indented enum value.
Fixes: 6c72cb05d4 ("net/mlx5e: Use bitmap field for profile features")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When using libvirt to passthrough VF to VM it will always set the VF vlan
to 0 even if user didn’t request it, this will cause libvirt to fail to
boot in case the PF isn't eswitch owner.
Example of such case is the DPU host PF which isn't eswitch manager, so
any attempt to passthrough VF of it using libvirt will fail.
Fix it by not returning error in case set VF vlan is called with vid 0.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add FEC counters' statistics of corrected_blocks and
uncorrectable_blocks, along with their lanes via ethtool.
HW supports corrected_blocks and uncorrectable_blocks counters both for
RS-FEC mode and FC-FEC mode. In FC mode these counters are accumulated
per lane, while in RS mode the correction method crosses lanes, thus
only total corrected_blocks and uncorrectable_blocks are reported in
this mode.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
log_max_qp in driver's default profile #2 was set to 18, but FW actually
supports 17 at the most - a situation that led to the concerning print
when the driver is loaded:
"log_max_qp value in current profile is 18, changing to HCA capabaility
limit (17)"
The expected behavior from mlx5_profile #2 is to match the maximum FW
capability in regards to log_max_qp. Thus, log_max_qp in profile #2 is
initialized to a defined static value (0xff) - which basically means that
when loading this profile, log_max_qp value will be what the currently
installed FW supports at most.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently all SFs are using the same CPUs. Spreading SF over CPUs, in
round-robin manner, in order to achieve better distribution of the SFs
over available CPUs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently IRQs are requested one by one. To balance spreading IRQs
among cpus using such scheme requires remembering cpu mask for the
cpus used for a given device. This complicates the IRQ allocation
scheme in subsequent patch.
Hence, prepare the code for bulk IRQs allocation. This enables
spreading IRQs among cpus in subsequent patch.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The downstream patches add more functionality to irq_pool_affinity.
Move the irq_pool_affinity logic to a new file in order to ease the
coding and maintenance of it.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move affinity binding of the IRQ to irq_request function in order to
bind the IRQ before inserting it to the xarray.
After this change, the IRQ is ready for use when inserted to the xarray.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, IRQ layer have a separate flow for ctrl and comp IRQs, and
the distinction between ctrl and comp IRQs is done in the IRQ layer.
In order to ease the coding and maintenance of the IRQ layer,
introduce a new API for requesting control IRQs -
mlx5_ctrl_irq_request(struct mlx5_core_dev *dev).
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Callers of this functions ignore its return value, as reported by
Wang Qing, in one of the return paths, it returns positive values.
Since return value is ignored anyways, void out the return type of the
function.
Reported-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
kfree() and bitmap_free() are the same. But using the latter is more
consistent when freeing memory allocated with bitmap_zalloc().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a bitmap is local to a function, it is safe to use the non-atomic
__[set|clear]_bit(). No concurrent accesses can occur.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The 'possible_idx' bitmap is set just after it is zeroed, so we can save
the first step.
The 'free_idx' bitmap is used only at the end of the function as the
result of a bitmap xor operation. So there is no need to explicitly
zero it before.
So, slightly simply the code and remove 2 useless 'bitmap_zero()' call
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In current switchdev implementation, every VF PR is assigned to
individual ring on switchdev ctrl VSI. For slow-path traffic, there
is a mapping VF->ring done in software based on src_vsi value (by
calling ice_eswitch_get_target_netdev function).
With this change, HW solution is introduced which is more
efficient. For each VF, src MAC (VF's MAC) filter will be created,
which forwards packets to the corresponding switchdev ctrl VSI queue
based on src MAC address.
This filter has to be removed and then replayed in case of
resetting one VF. Keep information about this rule in repr->mac_rule,
thanks to that we know which rule has to be removed and replayed
for a given VF.
In case of CORE/GLOBAL all rules are removed
automatically. We have to take care of readding them. This is done
by ice_replay_vsi_adv_rule.
When driver leaves switchdev mode, remove all advanced rules
from switchdev ctrl VSI. This is done by ice_rem_adv_rule_for_vsi.
Flag repr->rule_added is needed because in some cases reset
might be triggered before VF sends request to add MAC.
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_replay_vsi_adv_rule will replay advanced rules for a given VSI.
Exit this function when list of rules for given recipe is empty.
Do not add rule when given vsi_handle does not match vsi_handle
from the rule info.
Use ICE_MAX_NUM_RECIPES instead of ICE_SW_LKUP_LAST in order to find
advanced rules as well.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As the possible failure of the allocation, the devm_ioremap() may return
NULL pointer.
Take tgec_initialization() as an example.
If allocation fails, the params->base_addr will be NULL pointer and will
be assigned to tgec->regs in tgec_config().
Then it will cause the dereference of NULL pointer in set_mac_address(),
which is called by tgec_init().
Therefore, it should be better to add the sanity check after the calling
of the devm_ioremap().
Fixes: 3933961682 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the ibmveth sysfs code to use default_groups
field which has been the preferred way since aa30f47cf6 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Cristobal Forno <cforno12@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code is holding the &ofdpa->flow_tbl_lock spinlock so it is not
allowed to sleep. That means we have to pass the OFDPA_OP_FLAG_NOWAIT
flag to ofdpa_flow_tbl_del().
Fixes: 936bd48656 ("rocker: use FIB notifications instead of switchdev calls")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean the following coccicheck warning:
./drivers/net/ethernet/sfc/efx_channels.c:870:36-37: WARNING opportunity
for swap().
./drivers/net/ethernet/sfc/efx_channels.c:824:36-37: WARNING opportunity
for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the PCS selection to use mac_select_pcs, which allows the PCS
to perform any validation it needs.
We must use separate phylink_pcs instances for the USX and SGMII PCS,
rather than just changing the "ops" pointer before re-setting it to
phylink as this interface queries the PCS, rather than requesting it
to be changed.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can increase the efficiency of rx path by using buffers to receive
packets then build SKBs around them just before passing into the network
stack. In contrast, preallocating SKBs too early reduces CPU cache
efficiency.
NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
Down Up
Before 577 Mbps 648 Mbps
After 624 Mbps 695 Mbps
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
Down Up
Before 545 Mbps 625 Mbps
After 577 Mbps 648 Mbps
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The four RGMII interface modes take care of the required RGMII delay
configuration at the PHY and should not be limited by the network MAC
driver. Sadly, gemini was only permitting RGMII mode with no delays,
which would require the required delay to be inserted via PCB tracking
or by the MAC.
However, there are designs that require the PHY to add the delay, which
is impossible without Gemini permitting the other three PHY interface
modes. Fix the driver to allow these.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/E1n4mpT-002PLd-Ha@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Locally generated packets ingress the device through its CPU port. When
the CPU port is congested and there are not enough credits in its
headroom buffer, packets can be dropped.
While this might be acceptable for data packets that traverse the
network, configuration packets exchanged between the host and the device
(EMADs) should not be subjected to this flow control.
The "sdq_lp" bit in the SDQ (Send Descriptor Queue) context allows the
host to instruct the device to treat packets sent on this queue as
"local processing" and always process them, regardless of the state of
the CPU port's headroom.
Add the definition of this bit and set it for the dedicated SDQ reserved
for the transmission of EMAD packets. This makes the "local processing"
bit in the WQE (Work Queue Element) redundant, so clear it.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently PF and VF use two sets of command code for modules to interact
with firmware. These codes values are same espect the macro names. It is
redundent to keep two sets of command code for same functions between PF
and VF.
So this patch firstly creates a unified command code for PF and VF module.
We keep the macro name same with the PF command code name to avoid too many
meaningless modifications. Secondly the new common command codes are used
to replace the old ones in VF and deletes the old ones.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch firstly uses new tqp struct(hclge_comm_tqp) and removes the
old VF tqp struct(hclgevf_tqp). All the tqp stats members used in VF module
are modified according to the new hclge_comm_tqp.
Secondly VF tqp stats APIs are refactored to use new common tqp stats APIs.
The old tqp stats APIs in VF are deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch firstly uses new tqp struct(hclge_comm_tqp) and deletes the
old PF tqp struct(hclge_tqp). All the tqp stats members used in PF module
are modified according to the new hclge_comm_tqp.
Secondly PF tqp stats APIs are refactored to use new common tqp stats APIs.
The old tqp stats APIs in PF are deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch creates new set of common tqp stats structures and APIs for PF
and VF tqp stats module. Subfunctions such as get tqp stats, update tqp
stats and reset tqp stats are inclued in this patch.
These new common tqp stats APIs will be used to replace the old PF and VF
tqp stats APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses common rss init APIs to replace the old APIs in VF rss
module and removes the old VF rss init APIs. Several related Subfunctions
and macros are also modified in this patch.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses common rss init APIs to replace the old APIs in PF rss
module and deletes the old PF rss init APIs. Some related subfunctions and
macros are also modified in this patch.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch creates new set of common rss init APIs for PF and VF rss
module. Subfunctions called by rss init process are also created include
rss tuple configuration and rss indirect table configuration.
These new common rss init APIs will be used to replace the old PF and VF
rss init APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses new common rss set APIs to replace the old APIs in VF rss
module and removes those old rss set APIs. The related macros in VF are
also modified.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses new common rss set APIs to replace the old APIs in PF rss
module and deletes the old rss set APIs. The related macros are also
modified.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, hns3 PF and VF rss module have two sets of rss set APIs to
configure rss. There is no need to keep two sets of these same APIs.
So this patch creates new set of common rss set APIs for PF and VF reuse.
These new APIs will be used to unify old APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch firstly uses new rss parameter struct(hclge_comm_rss_cfg) as
child member of hclgevf_dev and deletes the original child rss parameter
member(hclgevf_rss_cfg). All the rss parameter members used in VF rss
module is modified according to the new hclge_comm_rss_cfg.
Secondly VF rss get APIs are refactored to use new common rss get APIs. The
old rss get APIs in VF are deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch firstly uses new rss parameter struct(hclge_comm_rss_cfg) as
child member of hclge_dev and deletes the original child rss parameter
members in vport. All the vport child rss parameter members used in PF rss
module is modified according to the new hclge_comm_rss_cfg.
Secondly PF rss get APIs are refactored to use new common rss get APIs. The
old rss get APIs in PF are deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PF and VF rss get APIs are almost the same espect the suffixes of API
names. These same impementions bring double development and bugfix work.
So this patch creates new common rss get APIs for PF and VF rss module.
Subfunctions called by rss query process are also created(e.g. rss tuple
conversion APIs).
These new common rss get APIs will be used to replace PF and VF old rss
APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there are two different sets of special command codes in PF and
VF cmdq modules, this is because VF driver only uses small part of all the
command codes. In other words, these not used command codes in VF are also
sepcial command codes theoretically.
So this patch unifes the special command codes and deletes the bool param
is_pf of hclge_comm_send. All the related functions are refactored
according to the new hclge_comm_send function prototype.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently PF stores its rss parameters in vport structure. VF stores rss
configurations in hclgevf_rss_cfg structure. Actually hns3 rss parameters
are same beween PF and VF. The two set of rss parameters are redundent and
may add extra bugfix work.
So this patch creates new common rss parameter struct(hclge_comm_rss_cfg)
to unify PF and VF rss configurations.
These new structures will be used to unify rss configurations in PF and VF
rss APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend lan966x driver with mdb support by implementing the switchdev
calls: SWITCHDEV_OBJ_ID_PORT_MDB and SWITCHDEV_OBJ_ID_HOST_MDB.
It is allowed to add both ipv4/ipv6 entries and l2 entries. To add
ipv4/ipv6 entries is not required to use the PGID table while for l2
entries it is required. The PGID table is much smaller than MAC table
so only fewer l2 entries can be added.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first entries in the PGID table are used by the front ports while
the last entries are used for different purposes like flooding mask,
copy to CPU, etc. So add these macros to define which entries can be
used for general purpose.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend mac functionality with the function lan966x_mac_ip_learn. This
function adds an entry in the MAC table for IP multicast addresses.
These entries can copy a frame to the CPU but also can forward on the
front ports.
This functionality is needed for mdb support. In case the CPU and some
of the front ports subscribe to an IP multicast address.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement read and write access to IEEE 802.3 Clause 45 Ethernet
phy registers while making use of new mdiobus_c45_regad and
mdiobus_c45_devad helpers.
Tested on the Ubiquiti UniFi 6 LR access point featuring
MediaTek MT7622BV WiSoC with Aquantia AQR112C.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of returning -1 (-EPERM) when MDIO bus is stuck busy
while writing or 0xffff if it happens while reading, return the
appropriate -ETIMEDOUT. Also fix return type to int instead of u32.
Refactor functions to use bitfield helpers instead of having various
masking and shifting constants in the code, which also results in the
register definitions in the header file being more obviously related
to what is stated in the MediaTek's Reference Manual.
Fixes: 656e705243 ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-01-04
This series contains updates to i40e and iavf drivers.
Mateusz adjusts displaying of failed VF MAC message when the failure is
expected as well as modifying an NVM info message to not confuse the user
for i40e.
Di Zhu fixes a use-after-free issue MAC filters for i40e.
Jedrzej fixes an issue with misreporting of Rx and Tx queues during
reinitialization for i40e.
Karen correct checking of channel queue configuration to occur against
active queues for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The RX page_ring is an optional feature that improves
performance. When allocation fails the driver can still
function, but possibly with a lower bandwidth.
Guard against dereferencing a NULL page_ring.
Fixes: 2768935a46 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reported-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/164111288276.5798.10330502993729113868.stgit@palantir17.mph.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the absence of this validation, if the user requests to
configure queues more than the enabled queues, it results in
sending the requested number of queues to the kernel stack
(due to the asynchronous nature of VF response), in which
case the stack might pick a queue to transmit that is not
enabled and result in Tx hang. Fix this bug by
limiting the total number of queues allocated for VF to
active queues of VF.
Fixes: d5b33d0244 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Ashwin Vijayavel <ashwin.vijayavel@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There was a wrong queues representation in sysfs during
driver's reinitialization in case of online cpus number is
less than combined queues. It was caused by stopped
NetworkManager, which is responsible for calling vsi_open
function during driver's initialization.
In specific situation (ex. 12 cpus online) there were 16 queues
in /sys/class/net/<iface>/queues. In case of modifying queues with
value higher, than number of online cpus, then it caused write
errors and other errors.
Add updating of sysfs's queues representation during driver
initialization.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When loading the i40e driver, it prints a message like: 'The driver for the
device detected a newer version of the NVM image v1.x than expected v1.y.
Please install the most recent version of the network driver.' This is
misleading as the driver is working as expected.
Fix that by removing the second part of message and changing it from
dev_info to dev_dbg.
Fixes: 4fb29bddb5 ("i40e: The driver now prints the API version in error message")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Hide i40e opcode information sent during response to VF in case when
untrusted VF tried to change MAC on the VF interface.
This is implemented by adding an additional parameter 'hide' to the
response sent to VF function that hides the display of error
information, but forwards the error code to VF.
Previously it was not possible to send response with some error code
to VF without displaying opcode information.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Return value from efx_mcdi_rpc() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent bpf-next merge brought in header changes which uncovered
includes missing in net-next which were not present in bpf-next.
Build problems happen only on less-popular arches like hppa,
sparc, alpha etc.
I could repro the build problem with ice but not the mlx5 problem
Abdul was reporting. mlx5 does look like it should include filter.h,
anyway.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Fixes: e63a023489 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Link: https://lore.kernel.org/all/7c03768d-d948-c935-a7ab-b1f963ac7eed@linux.vnet.ibm.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for scatter gather DMA. DMA in PMAC splits
the packet into several buffers when the MTU on the CPU port is
less than the MTU of the switch. The first buffer starts at an
offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the
offset. Thanks to this patch, the user can still connect to the
device in such a situation. For normal configurations, the patch
has no effect on performance.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get originating device from tuple offload metadata match ingress_ifindex,
and set flow_source hint to either LOCAL for vf/sf reps, UPLINK for
uplink/wire/tunnel devices/bond, or ANY (as before this patch)
for all others.
This allows lower layer (software steering or firmware) to insert the tuple
rule only in one table (either rx or tx) instead of two (rx and tx).
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
That said, 'high_dma' can only be 1 after a successful
dma_set_mask_and_coherent().
Simplify code and remove some dead code accordingly, including a now
useless parameter to vxge_device_register().
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
That said, 'dma_flag' can only be 'true' after a successful
dma_set_mask_and_coherent().
Simplify code and remove some dead code accordingly, including the now
useless 'high_dma_flag' field in 'struct s2io_nic'.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sorry for being rude but new vendors/drivers are supposed to be disabled
by default, otherwise we will have to manually keep track of all vendors
we are not interested in building.
Fixes: 2f207cbf0d ("net: vertexcom: Add MSE102x SPI support")
CC: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A simple variable update from "pcs" to "mdio_device" for the mdio device
will make things a little cleaner.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove references to lynx_pcs structures so drivers like the Felix DSA
can reference alternate PCS drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 26eee0210a ("net/fsl: fix a bug in xgmac_mdio") fixed a bug in
the QorIQ mdio driver but left the (now unused) incorrect bit definition
for MDIO_DATA_BSY in the code. This commit removes it.
Signed-off-by: Markus Koch <markus@notsyncing.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
Simplify code and remove some dead code accordingly.
Now that qed_set_coherency_mask() is mostly a single call to
dma_set_mask_and_coherent(), fold it in its only caller.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
That said, 'pci_using_dac' can only be 1 after a successful
dma_set_mask_and_coherent().
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
That said, 'pci_using_dac' can only be 1 after a successful
dma_set_mask_and_coherent().
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The role of ena_calc_max_io_queue_num() is to return the number
of queues supported by the device, which means the return value
should be >=0.
The function that calls ena_calc_max_io_queue_num(), checks
the return value. If it is 0, it means the device reported
it supports 0 IO queues. This case is considered an error
and is handled by the calling function accordingly.
However the current implementation of ena_calc_max_io_queue_num()
is wrong, since when it detects the device supports 0 IO queues,
it returns -EFAULT.
In such a case the calling function doesn't detect the error,
and therefore doesn't handle it.
This commit changes ena_calc_max_io_queue_num() to return 0
in case the device reported it supports 0 queues, allowing the
calling function to properly handle the error case.
Fixes: 736ce3f414 ("net: ena: make ethtool -l show correct max number of queues")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A wrong request id received from the device is a sign that
something is wrong with it, therefore trigger a device reset.
Also add some debug info to the "Page is NULL" print to make
it easier to debug.
Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ena_com_tx_comp_req_id_get() checks the req_id of a received completion,
and if it is out of bounds returns -EINVAL. This is a sign that
something is wrong with the device and it needs to be reset.
The current code does not reset the device in this case, which leaves
the driver in an undefined state, where this completion is not properly
handled.
This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq()
and ena_clean_xdp_irq() which resets the device to fix the issue.
This commit also removes unnecessary request id checks from
validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded
because it was already performed in ena_com_tx_comp_req_id_get(), which
is called right before these functions.
Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask_and_coherent() with a 64-bit mask
will never fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
That said, 'pci_using_dac' can only be 1 after a successful
dma_set_mask_and_coherent().
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
This simplifies code and removes some dead code (dma_set_coherent_mask()
can not fail after a successful dma_set_mask())
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5 Software steering, New features and optimizations
This patch series brings various SW steering features, optimizations and
debug-ability focused improvements.
1) Expose debugfs for dumping the SW steering resources
2) Removing unused fields
3) support for matching on new fields
4) steering optimization for RX/TX-only rules
5) Make Software steering the default steering mechanism when
available, applies only to Switchdev mode FDB
From Yevgeny Kliteynik and Muhammad Sammar:
- Patch 1 fixes an error flow in creating matchers
- Patch 2 fix lower case macro prefix "mlx5_" to "MLX5_"
- Patch 3 removes unused struct member in mlx5dr_matcher
- Patch 4 renames list field in matcher struct to list_node to reflect the
fact that is field is for list node that is stored on another struct's lists
- Patch 5 adds checking for valid Flex parser ID value
- Patch 6 adds the missing reserved fields to dr_match_param and aligns it to
the format that is defined by HW spec
- Patch 7 adds support for dumping SW steering (SMFS) resources using debugfs
in CSV format: domain and its tables, matchers and rules
- Patch 8 adds support for a new destination type - UPLINK
- Patch 9 adds WARN_ON_ONCE on refcount checks in SW steering object destructors
- Patches 10, 11, 12 add misc5 flow table match parameters and add support for
matching on tunnel headers 0 and 1
- Patch 13 adds support for matching on geneve_tlv_option_0_exist field
- Patch 14 implements performance optimization for for empty or RX/TX-only
matchers by splitting RX and TX matchers handling: matcher connection in the
matchers chain is split into two separate lists (RX only and TX only), which
solves a usecase of many RX or TX only rules that create a long chain of
RX/TX-only paths w/o the actual rules
- Patch 15 ignores modify TTL if device doesn't support it instead of
adding and unsupported action
- Patch 16 sets SMFS as a default steering mode
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmHOvKsACgkQSD+KveBX
+j4CpQf8Cc3NkWhGVYYhRBlntdpyVTDpoVhw6RDXVwboIRZ3GcMm81SxgwKrDuUx
Yhup4K1CNKt44D1RRhX4ElSemfo/afxfGIcq7S87vciUOaebWTIZgRyNvuYr/buI
v9LIM7zTb1aXL7m3KQHOGc7cucVRvsNjteTxvp/DR0bPFEuzAr5tw9Y5qop9pBbM
cfgdmXKUoRxA039mqZ2Fl7y+z51zRkfsCza7lEHcGgpvwOLubFEaghj7YTIT6h1m
+We8w3/+B0mqS0HpByIxmyf/EQBG5Hl7FTbFj1Somn7EFEP4E+LaFzg8nGsUHEeI
f5027uM7XGlThAUrgdaOMcwBfIuOww==
=BE8m
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 Software steering, New features and optimizations
This patch series brings various SW steering features, optimizations and
debug-ability focused improvements.
1) Expose debugfs for dumping the SW steering resources
2) Removing unused fields
3) support for matching on new fields
4) steering optimization for RX/TX-only rules
5) Make Software steering the default steering mechanism when
available, applies only to Switchdev mode FDB
From Yevgeny Kliteynik and Muhammad Sammar:
- Patch 1 fixes an error flow in creating matchers
- Patch 2 fix lower case macro prefix "mlx5_" to "MLX5_"
- Patch 3 removes unused struct member in mlx5dr_matcher
- Patch 4 renames list field in matcher struct to list_node to reflect the
fact that is field is for list node that is stored on another struct's lists
- Patch 5 adds checking for valid Flex parser ID value
- Patch 6 adds the missing reserved fields to dr_match_param and aligns it to
the format that is defined by HW spec
- Patch 7 adds support for dumping SW steering (SMFS) resources using debugfs
in CSV format: domain and its tables, matchers and rules
- Patch 8 adds support for a new destination type - UPLINK
- Patch 9 adds WARN_ON_ONCE on refcount checks in SW steering object destructors
- Patches 10, 11, 12 add misc5 flow table match parameters and add support for
matching on tunnel headers 0 and 1
- Patch 13 adds support for matching on geneve_tlv_option_0_exist field
- Patch 14 implements performance optimization for for empty or RX/TX-only
matchers by splitting RX and TX matchers handling: matcher connection in the
matchers chain is split into two separate lists (RX only and TX only), which
solves a usecase of many RX or TX only rules that create a long chain of
RX/TX-only paths w/o the actual rules
- Patch 15 ignores modify TTL if device doesn't support it instead of
adding and unsupported action
- Patch 16 sets SMFS as a default steering mode
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
currently most cmdq APIs are unified in hclge_comm_cmd.c. Newly developed
cmdq APIs should also be placed in hclge_comm_cmd.c. So there is no need to
keep hclge_cmd.c and hclgevf_cmd.c.
This patch moves the hclge(vf)_cmd_send to hclge(vf)_main.c and deletes
the source files and makefile scripts.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses common cmdq init and uninit APIs to replace the old APIs in
VF cmdq module init and uninit module. Then the old VF init and uninit
APIs is deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses common cmdq init and uninit APIs to replace the old APIs in
PF cmdq module init and uninit modules. Then the old PF init and uninit
APIs is deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PF and VF cmdq init and uninit APIs are also almost same espect the
suffixes of API names.
This patch creates common cmdq init and uninit APIs needed by PF and VF
cmdq modules. The next patch will use the new unified APIs to replace init
and uninit APIs in PF module.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses common cmdq resource allocate/free/query APIs to replace
the old APIs in VF cmdq module and deletes the old cmdq resource APIs.
Still we kept hclgevf_cmd_setup_basic_desc name as a seam API to avoid too
many meaningless replacement.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses common cmdq resource allocate/free/query APIs to replace
the old APIs in PF cmdq module and deletes the old cmdq resource APIs.
Still we kept hclge_cmd_setup_basic_desc name as a seam API to avoid too
many meaningless replacement.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PF and VF cmdq module resource allocate/free/query APIs are almost the
same espect the suffixes of API names. These same implementations bring
double development and bugfix work.
This patch creates common cmdq resource allocate/free/query APIs called by
PF and VF cmdq init/uninit APIs. The next patch will use the new unified
APIs to replace init/uninit APIs.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch firstly uses new hardware description struct hclge_comm_hw as
child member of hclgevf_hw and deletes the old hardware description child
members. All the hclgevf_hw variables used in VF module is modified
according to the new hclgevf_hw.
Secondly hclgevf_cmd_send is refactored to use hclge_comm_cmd_send APIs.
The old functions called by hclgevf_cmd_send are all deleted. Still we kept
hclgevf_cmd_send to avoid too many meaningless modifications.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch firstly uses new hardware description struct hclge_comm_hw as
child member of hclge_hw and deletes the original child memebers of
hclge_hw. All the hclge_hw variables used in PF module is modified
according to the new hclge_hw.
Secondly hclge_cmd_send is refactored to use hclge_comm_cmd_send APIs. The
old functions called by hclge_cmd_send are deleted and hclge_cmd_send is
kept to avoid too many meaningless modifications.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch create new set of unified hclge_comm_cmd_send APIs for PF and VF
cmdq module. Subfunctions called by hclge_comm_cmd_send are also created
include cmdq result check, cmdq return code conversion and ring space
opertaion APIs.
These new common cmdq APIs will be used to replace the old PF and VF cmdq
APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch use new common struct hclge_desc to replace struct hclgevf_desc
in VF cmdq module and then delete the old struct hclgevf_desc.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently PF and VF cmdq APIs use struct hclge(vf)_hw to describe cmdq
hardware information needed by hclge(vf)_cmd_send. There are a little
differences between its child struct hclge_cmq_ring and hclgevf_cmq_ring.
It is redundent to use two sets of structures to support same functions.
So this patch creates new set of common cmdq hardware description
structures(hclge_comm_hw) to unify PF and VF cmdq functions. The struct
hclge_desc is still kept to avoid too many meaningless replacement.
These new structures will be used to unify hclge(vf)_hw structures in PF
and VF cmdq APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we plan to refactor PF and VF cmdq module. A new file folder
hns3_common will be created to store new common APIs used by PF and VF
cmdq module. Thus the PF and VF compilation process will both depends on
the hns3_common. This may cause parallel building problems if we add a new
makefile building unit.
So this patch combined the PF and VF makefile scripts to the top level
makefile to support the new hns3_common which will be created in the next
patch.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set SMFS (SW-managed flow steering) as a default steering mode
instead of DMFS (device-managed flow steering)
In SMFS, the driver writes the STEs (Steering Table Entries) directly
to the device's ICM, which allows for a higher rule insertion rate
than through using FW command interface, as it is done in DMFS.
SMFS/DMFS steering modes can be configured through devlink param
'flow_steering_mode'. The possible values are 'smfs' or 'dmfs'.
The desired 'flow_steering_mode' param value should be set before
enabling switchdev mode.
Example:
# devlink dev param set pci/0000:05:00.0 name flow_steering_mode smfs
# devlink dev eswitch set pci/0000:05:00.0 mode switchdev
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
When modifying TTL, packet's csum has to be recalculated.
Due to HW issue in ConnectX-5, csum recalculation for modify TTL
is supported through a work-around that is specifically enabled
by configuration.
If the work-around isn't enabled, ignore the modify TTL action
rather than adding an unsupported action.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Every matcher has RX and TX paths. When a new matcher is created, its RX
and TX start/end anchors are connected to the respective RX and TX anchors
of the previous and next matchers.
This creates a potential performance issue: when a certain rule is added
to a matcher, in many cases it is RX or TX only rule, which may create a
long chain of RX/TX-only paths w/o the actual rules.
This patch aims to handle this issue.
RX and TX matchers are now handled separately: matcher connection in the
matchers chain is split into two separate lists: RX only and TX only.
when a new matcher is created, it is initially created 'detached' - its
RX/TX members are not inserted into the table's matcher list.
When an actual rule is added, only its appropriate RX or TX nic matchers
are then added to the table's nic matchers list and inserted into its
place in the chain of matchers.
I.e., if the rule that is being added is an RX-only rule, only the RX
part of the matcher will be connected to the chain, while TX part of the
matcher remains detached and doesn't prolong the TX chain of the matchers.
Same goes for rule deletion: when the last RX/TX rule of the nic matcher
is destroyed, the nic matcher is removed from its list.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Match on geneve_tlv_option_0_exist field on devices that support STEv1.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Tunnel headers are generic encapsulation headers, applies for all
tunneling protocols identified by the device native parser or by the
programmable parser, this support will enable raw matching headers 0 and 1.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Add support for misc5 match parameter as per HW spec, this will allow
matching on tunnel_header fields.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Extend mlx5 debugfs support to present Software Steering resources:
dr_domain including it's tables, matchers and rules.
The interface is read-only. While dump is being presented, new steering
rules cannot be inserted/deleted.
The steering information is dumped in the CSV form with the following
format:
<object_type>,<object_ID>, <object_info>,...,<object_info>
This data can be read at the following path:
/sys/kernel/debug/mlx5/<BDF>/steering/fdb/<domain_handle>
Example:
# cat /sys/kernel/debug/mlx5/0000:82:00.0/steering/fdb/dmn_000018644
3100,0x55caa4621c50,0xee802,4,65533
3101,0x55caa4621c50,0xe0100008
Changes in V2:
- Reduce temp hex buffer size and avoid unnecessary memset
- Use bin2hex() instead of DIY loop
- Don't check debugfs functions return values
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Allow only legal values for flex parser ID - values from 0 to 7.
For other values skip the parser, and as a result the matcher creation
will fail for using invalid flex parser ID.
Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
In dr_types structs, some list fields are list heads, and some
are just list nodes that are stored on the other structs' lists.
Rename the appropriate list field to reflect this distinction.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Macros prefix should be capital letters - fix the prefix in
mlx5_FLEX_PARSER_MPLS_OVER_UDP_ENABLED.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
The error code of nic matcher init functions wasn't checked.
This patch improves the matcher init function and fix error flow bug:
the handling of match parameter is moved into a separate function
and error flow is simplified.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.
Fixes: 18a6c85fcc ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by checkpatch.pl, no space is necessary after a cast.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch.pl complains as the following:
Alignment should match open parenthesis
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/process/coding-style.rst says (in line 88)
"Don't put multiple assignments on a single line either."
This patch fixes the coding style issue reported by checkpatch.pl.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add () around macro argument to avoid precedence issues
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.
This silences the related checkpatch warnings from:
commit 5dbdb2d87c ("checkpatch: prefer strscpy to strlcpy")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to enable flow-director filter when multiple TCs are
configured. Flow director filter can be configured using ethtool
(--config-ntuple option). When multiple TCs are configured, each
TC is mapped to an unique HW VSI. So VSI corresponding to queue
used in filter is identified and flow director context is updated
with correct VSI while configuring ntuple filter in HW.
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
queue
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-12-29
Ruud Bos says:
The igb driver provides support for PEROUT and EXTTS pin functions that
allow adapter external use of timing signals. At Hottinger Bruel & Kjaer we
are using the PEROUT function to feed a PTP corrected 1pps signal into an
FPGA as cross system synchronized time source.
Support for the PEROUT and EXTTS SDP functions is currently limited to
i210/i211 based adapters. This patch series enables these functions also
for 82580/i354/i350 based ones. Because the time registers of these
adapters do not have the nice split in second rollovers as the i210 has,
the implementation is slightly more complex compared to the i210
implementation.
The PEROUT function has been successfully tested on an i350 based ethernet
adapter. Using the following user space code excerpt, the driver outputs a
PTP corrected 1pps signal on the SDP0 pin of an i350:
struct ptp_pin_desc desc;
memset(&desc, 0, sizeof(desc));
desc.index = 0;
desc.func = PTP_PF_PEROUT;
desc.chan = 0;
if (ioctl(fd, PTP_PIN_SETFUNC, &desc) == 0) {
struct timespec ts;
if (clock_gettime(clkid, &ts) == 0) {
struct ptp_perout_request rq;
memset(&rq, 0, sizeof(rq));
rq.index = 0;
rq.start.sec = ts.tv_sec + 1;
rq.start.nsec = 500000000;
rq.period.sec = 1;
rq.period.nsec = 0;
if (ioctl(fd, PTP_PEROUT_REQUEST, &rq) == 0) {
/* 1pps signal is now available on SDP0 */
}
}
}
The added EXTTS function has not been tested. However, looking at the data
sheets, the layout of the registers involved match the i210 exactly except
for the time registers mentioned before. Hence the almost identical
implementation.
---
Note: I made changes to fix RCT and checkpatch messages regarding
unnecessary parenthesis.
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add inetaddr notifiers to support add/del IPv4 address on switchdev
port. We create TRAP on first address, added on port and delete TRAP,
when last address removed.
Currently, driver supports only regular port to became routed.
Other port type support will be added later
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initial implementation of notification handlers. For now this is just
stub.
So that we can move forward and add prestera_router_hw's objects
manipulations.
We support several addresses on interface. We just have nothing to do for
second address, because rif is already enabled on this interface, after
first one.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add prestera_router_hw.c. This file contains functions, which track HW
objects relations and links. This include implicity creation of objects,
that needed by requested one and implicity removing of objects, which
reference counter is became zero.
We need this layer, because kernel callbacks not always mapped to
creation of single HW object. So let it be two different layers - one
for subscribing and parsing kernel structures, and another
(prestera_router_hw.c) for HW objects relations tracking.
There is two types of objects on router_hw layer:
- Explicit objects (rif_entry) : created by higher layer.
- Implicit objects (vr) : created on demand by explicit objects.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add prestera_router.c, which contains code to subscribe/unsubscribe on
kernel notifiers for router. This handle kernel notifications,
parse structures to make key to manipulate prestera_router_hw's objects.
Also prestera_router is container for router's objects database.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add functions to enable routing on port, which is not in vlan.
Also we can enable routing on vlan.
prestera_hw_rif_create() take index of allocated virtual router.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add functions and structures to allocate virtual router.
prestera_hw_vr_create() return index of allocated VR so that we can move
forward and also add another objects (e.g. router interface),
which has link to VR.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing includes unmasked by the subsequent change.
Mostly network drivers missing an include for XDP_PACKET_HEADROOM.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211230012742.770642-2-kuba@kernel.org
Thanks for your review. Here is the new version for this patch.
This patch adds support for the emac rx dma present on sun4i. The emac
is able to move packets from rx fifo to RAM by using dma.
Change since v4.
- rename sbk field to skb
- rename alloc_emac_dma_req to emac_alloc_dma_req
- using kzalloc(..., GPF_ATOMIC) in interrupt context to avoid
sleeping
- retry by using emac_inblk_32bit when emac_dma_inblk_32bit fails
- fix some code style issues
Change since v5.
- fix some code style issue
Signed-off-by: Conley Lee <conleylee@foxmail.com>
Link: https://lore.kernel.org/r/tencent_DE05ADA53D5B084D4605BE6CB11E49EF7408@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support for the PTP pin function on 82580/i354/i350 based adapters.
Because the time registers of these adapters do not have the nice split in
second rollovers as the i210 has, the implementation is slightly more
complex compared to the i210 implementation.
Signed-off-by: Ruud Bos <kernel.hbk@gmail.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Support for the PEROUT PTP pin function on 82580/i354/i350 based adapters.
Because the time registers of these adapters do not have the nice split in
second rollovers as the i210 has, the implementation is slightly more
complex compared to the i210 implementation.
Signed-off-by: Ruud Bos <kernel.hbk@gmail.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove code duplication in the tsync interrupt handler function by moving
this logic to separate functions. This keeps the interrupt handler readable
and allows the new functions to be extended for adapter types other than
i210.
Signed-off-by: Ruud Bos <kernel.hbk@gmail.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allow reuse of SDP config struct initialization by moving it to a
separate function.
Signed-off-by: Ruud Bos <kernel.hbk@gmail.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.
There's a lot of missing includes this was masking. Primarily
in networking tho, this time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
In case of an error in mlx5e_set_features(), 'netdev->features' must be
updated with the correct state of the device to indicate which features
were updated successfully.
To do that we maintain a copy of 'netdev->features' and update it after
successful feature changes, so we can assign it to back to
'netdev->features' if needed.
However, since not all netdev features are handled by the driver (e.g.
GRO/TSO/etc), some features may not be updated correctly in case of an
error updating another feature.
For example, while requesting to disable TSO (feature which is not
handled by the driver) and enable HW-GRO, if an error occurs during
HW-GRO enable, 'oper_features' will be assigned with 'netdev->features'
and HW-GRO turned off. TSO will remain enabled in such case, which is a
bug.
To solve that, instead of using 'netdev->features' as the baseline of
'oper_features' and changing it on set feature success, use 'features'
instead and update it in case of errors.
Fixes: 75b81ce719 ("net/mlx5e: Don't override netdev features field unless in error flow")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix a memory leak with decap rule with internal port as destination
device. The driver allocates a modify hdr action but doesn't set
the flow attr modify hdr action which results in skipping releasing
the modify hdr action when releasing the flow.
backtrace:
[<000000005f8c651c>] krealloc+0x83/0xd0
[<000000009f59b143>] alloc_mod_hdr_actions+0x156/0x310 [mlx5_core]
[<000000002257f342>] mlx5e_tc_match_to_reg_set_and_get_id+0x12a/0x360 [mlx5_core]
[<00000000b44ea75a>] mlx5e_tc_add_fdb_flow+0x962/0x1470 [mlx5_core]
[<0000000003e384a0>] __mlx5e_add_fdb_flow+0x54c/0xb90 [mlx5_core]
[<00000000ed8b22b6>] mlx5e_configure_flower+0xe45/0x4af0 [mlx5_core]
[<00000000024f4ab5>] mlx5e_rep_indr_offload.isra.0+0xfe/0x1b0 [mlx5_core]
[<000000006c3bb494>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<00000000d3dac2ea>] tc_setup_cb_add+0x1d2/0x420
Fixes: b16eb3c81f ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-28
This series contains updates to igc driver only.
Vinicius disables support for crosstimestamp on i225-V as lockups are being
observed.
James McLaughlin fixes Tx timestamping support on non-MSI-X platforms.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
====================
Link: https://lore.kernel.org/r/20211228182421.340354-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
10GbE Intel Wired LAN Driver Updates 2021-12-28
Alexander Lobakin says:
napi_build_skb() I introduced earlier this year ([0]) aims
to decrease MM pressure and the overhead from in-place
kmem_cache_alloc() on each Rx entry processing by decaching
skbuff_heads from NAPI per-cpu cache filled prior to that by
napi_consume_skb() (so it is sort of a direct shortcut for
free -> mm -> alloc cycle).
Currently, no in-tree drivers use it. Switch all Intel Ethernet
drivers to it to get slight-to-medium perf boosts depending on
the frame size.
ice driver, 50 Gbps link, pktgen + XDP_PASS (local in) sample:
frame_size/nthreads 64/42 128/20 256/8 512/4 1024/2 1532/1
net-next (Kpps) 46062 34654 18248 9830 5343 2714
series 47438 34708 18330 9875 5435 2777
increase 2.9% 0.15% 0.45% 0.46% 1.72% 2.32%
Additionally, e1000's been switched to napi_consume_skb() as it's
safe and works fine there, and there's no point in napi_build_skb()
without paired NAPI cache feeding point.
[0] https://lore.kernel.org/all/20210213141021.87840-1-alobakin@pm.me
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbevf: switch to napi_build_skb()
ixgbe: switch to napi_build_skb()
igc: switch to napi_build_skb()
igb: switch to napi_build_skb()
ice: switch to napi_build_skb()
iavf: switch to napi_build_skb()
i40e: switch to napi_build_skb()
e1000: switch to napi_build_skb()
e1000: switch to napi_consume_skb()
====================
Link: https://lore.kernel.org/r/20211228175815.281449-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When allocated, this bitmap is not initialized. Only the first bit is set a
few lines below.
Use bitmap_zalloc() to make sure that it is cleared before being used.
Fixes: 6461b446f2 ("ionic: Add interrupts and doorbells")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a missing line after the declaration and
fixes the checkpatch warning:
WARNING: Missing a blank line after declarations
+ int desc;
+ for (desc = 0; desc < LTQ_DESC_NUM; desc++)
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://lore.kernel.org/r/20211228220031.71576-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the missing code comment for memory barrier
call and fixes checkpatch warning:
WARNING: memory barrier without comment
+ wmb();
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://lore.kernel.org/r/20211228214910.70810-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since referenced change pci_irq_vector() can't be used in atomic
context any longer. This conflicts with our usage of this function
in rtl8169_netpoll(). Therefore store the interrupt number in
struct rtl8169_private.
Fixes: 495c66aca3 ("genirq/msi: Convert to new functions")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/3cd24763-f307-78f5-76ed-a5fbf315fb28@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Time synchronization was not properly enabled on non-MSI-X platforms.
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Signed-off-by: James McLaughlin <james.mclaughlin@qsc.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It was reported that when PCIe PTM is enabled, some lockups could
be observed with some integrated i225-V models.
While the issue is investigated, we can disable crosstimestamp for
those models and see no loss of functionality, because those models
don't have any support for time synchronization.
Fixes: a90ec84837 ("igc: Add support for PTP getcrosststamp()")
Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/
Reported-by: Stefan Dietrich <roots@gmx.de>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
ixgbevf driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
ixgbe driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
igc driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
igb driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
ice driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
iavf driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
i40e driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx element.
e1000 driver runs Tx completion polling cycle right before the Rx
one. Now that e1000 uses napi_consume_skb() to put skbuff_heads of
completed entries into the cache, it will never empty and always
warm at that moment. Switch to the napi_build_skb() to relax mm
pressure on heavy Rx and increase throughput.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In order to take the best from per-cpu NAPI skbuff_head caches and
CPU cycles, let's switch from dev_kfree_skb_any(), which passes skb
back to the mm layer, to napi_consume_skb(), which feeds those
caches on non-zero budget instead (falls back to the former on 0).
Do the replacement in e1000_unmap_and_free_tx_resource(). There are
4 call sites of this function throughout the driver:
* e1000_clean_tx_ring(). Slowpath, process context, cleans the
whole Tx ring on ifdown. Use budget of 0 here;
* e1000_tx_map(). Hotpath, net Tx softirq, unmaps the buffers in
case of error. Use 0 as well;
* e1000_clean_tx_irq(). Hotpath, NAPI Tx completion polling cycle.
As the driver doesn't count completed Tx entries towards the NAPI
budget, just use the poll budget of 64 to utilize caches.
Apart from being a preparation for switching to napi_build_skb(),
this is useful on its own as well, as napi_consume_skb() flushes
skb caches by batches of 32 instead of one-at-a-time.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Received frames have FCS truncated. There is no need
to subtract FCS length from the statistics.
Fixes: fe1a56420c ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there
is no need to call free_netdev() explicitly or there will be a double
free().
Simplify all error handling paths accordingly.
Fixes: d51b6ce441 ("net: ethernet: add ag71xx driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq() for DT users only.
While at it propagate error code in case request_irq() fails instead of
returning -EBUSY.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq(). While doing so return error pointer
from read_dts_node() as platform_get_irq() may return -EPROBE_DEFER.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The blamed commit changed the vlan used by the host ports to be 4095
instead of 0.
Because of this change the following issues are seen:
- when the port is probed first it was adding an entry in the MAC table
with the wrong vlan (port->pvid which is default 0) and not HOST_PVID
- when the port is removed from a bridge, it was using the wrong vlan to
add entries in the MAC table. It was using the old PVID and not the
HOST_PVID
This patch fixes this two issues by using the HOST_PVID instead of
port->pvid.
Fixes: 6d2c186afa ("net: lan966x: Add vlan support.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If NETIF_F_GRO_HW is disabled, the existing driver code uses kmalloc'ed
data for RX buffers. This causes inefficient SW GRO performance
because the GRO data is merged using the less efficient frag_list.
Use netdev_alloc_frag() and friends instead so that GRO data can be
merged into skb_shinfo(skb)->frags for better performance.
[Use skb_free_frag() - Vikas Gupta]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The xdp_do_flush_map function has been replaced with the more general
xdp_do_flush().
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support showing and setting the CQE mode in ethtool.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CQE coalescing mode is the same as the timer reset coalescing mode
on Broadcom devices. Currently this mode is always enabled if it
is supported by the device. Restructure the code slightly to support
dynamically changing this mode.
Add a flags field to struct bnxt_coal. Initially, the CQE flag will
be set for the RX and TX side if the device supports it. We need to
move bnxt_init_dflt_coal() to set up default coalescing until the
capability is determined.
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5750X (P5) chips handle receiving packets on the NQ rather than the main
completion queue so we need to get and set stats from the correct spots
for dynamic interrupt moderation.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Log the unrecognized error report type value as well.
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FW has been modified to send a new async event when it detects
a pause storm. Register for this new event and log it upon receipt.
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmHD/VkACgkQSD+KveBX
+j4AXgf/eOPLXGtPLtWI6J5tVtIRk1sX0BDRcOhvHJiQtFtRGFNpQKdwsZ0bDjos
YSuRtqiY1SORQOuqDL41r2m68jzXpU49z3O6jD4ELojw2+rKmTC6PiNdRdNm34rl
1bU25qYNK7rsW1EyoaW1FUp91+5+1pkzWcJwO0JY6mrCoUa2FFdwFDkb6KBRDiCZ
JLBRKFzsqzprYIFWqBm6FyE+0vFipkMzp33tIYzgoe1/A1gWOspsTJDd2tOFVXvw
UWOudh3xYi1+7WcFov1K4vf1ppFvPhe3JkzC47Q/qqNia8gDYcXRosGw06c05Z5p
G8CU7D44OUJ4OLjG8oMyNhFAfpUKEg==
=tS8n
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-12-22
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
net/mlx5e: Delete forward rule for ct or sample action
net/mlx5e: Fix ICOSQ recovery flow for XSK
net/mlx5e: Fix interoperability between XSK and ICOSQ recovery flow
net/mlx5e: Fix skb memory leak when TC classifier action offloads are disabled
net/mlx5e: Wrap the tx reporter dump callback to extract the sq
net/mlx5: Fix tc max supported prio for nic mode
net/mlx5: Fix SF health recovery flow
net/mlx5: Fix error print in case of IRQ request failed
net/mlx5: Use first online CPU instead of hard coded CPU
net/mlx5: DR, Fix querying eswitch manager vport for ECPF
net/mlx5: DR, Fix NULL vs IS_ERR checking in dr_domain_init_resources
====================
Link: https://lore.kernel.org/r/20211223190441.153012-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ETHER_CLK_SEL_FREQ_SEL_2P5M is not 0 bit of the register. This is a
value, which is 0. Fix from BIT(0) to 0.
Reported-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Fixes: b38dd98ff8 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211223073633.101306-1-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the u32 variable to type u64 in a context where expression of
type u64 is required to avoid potential overflow.
Fixes: e9e3720002 ("net: stmmac: ptp: update tas basetime after ptp adjust")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Link: https://lore.kernel.org/r/20211223073928.37371-1-xiaoliang.yang_1@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch series extends the current supported bridge flags with the
following flags: BR_FLOOD, BR_BCAST_FLOOD and BR_LEARNING.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All the error handling paths of 'mlx5e_tc_add_fdb_flow()' end to 'err_out'
where 'flow_flag_set(flow, FAILED);' is called.
All but the new error handling paths added by the commits given in the
Fixes tag below.
Fix these error handling paths and branch to 'err_out'.
Fixes: 166f431ec6 ("net/mlx5e: Add indirect tc offload of ovs internal port")
Fixes: b16eb3c81f ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
(cherry picked from commit 31108d142f)
When there is ct or sample action, the ct or sample rule will be deleted
and return. But if there is an extra mirror action, the forward rule can't
be deleted because of the return.
Fix it by removing the return.
Fixes: 69e2916ebc ("net/mlx5: CT: Add support for mirroring")
Fixes: f94d6389f6 ("net/mlx5e: TC, Add support to offload sample action")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There are two ICOSQs per channel: one is needed for RX, and the other
for async operations (XSK TX, kTLS offload). Currently, the recovery
flow for both is the same, and async ICOSQ is mistakenly treated like
the regular ICOSQ.
This patch prevents running the regular ICOSQ recovery on async ICOSQ.
The purpose of async ICOSQ is to handle XSK wakeup requests and post
kTLS offload RX parameters, it has nothing to do with RQ and XSKRQ UMRs,
so the regular recovery sequence is not applicable here.
Fixes: be5323c837 ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Both regular RQ and XSKRQ use the same ICOSQ for UMRs. When doing
recovery for the ICOSQ, don't forget to deactivate XSKRQ.
XSK can be opened and closed while channels are active, so a new mutex
prevents the ICOSQ recovery from running at the same time. The ICOSQ
recovery deactivates and reactivates XSKRQ, so any parallel change in
XSK state would break consistency. As the regular RQ is running, it's
not enough to just flush the recovery work, because it can be
rescheduled.
Fixes: be5323c837 ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When TC classifier action offloads are disabled (CONFIG_MLX5_CLS_ACT in
Kconfig), the mlx5e_rep_tc_receive() function which is responsible for
passing the skb to the stack (or freeing it) is defined as a nop, and
results in leaking the skb memory. Replace the nop with a call to
napi_gro_receive() to resolve the leak.
Fixes: 28e7606fa8 ("net/mlx5e: Refactor rx handler of represetor device")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Only prio 1 is supported if firmware doesn't support ignore flow
level for nic mode. The offending commit removed the check wrongly.
Add it back.
Fixes: 9a99c8f125 ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SF do not directly control the PCI device. During recovery flow SF
should not be allowed to do pci disable or pci reset, its PF will do it.
It fixes the following kernel trace:
mlx5_core.sf mlx5_core.sf.25: mlx5_health_try_recover:387:(pid 40948): starting health recovery flow
mlx5_core 0000:03:00.0: mlx5_pci_slot_reset was called
mlx5_core 0000:03:00.0: wait vital counter value 0xab175 after 1 iterations
mlx5_core.sf mlx5_core.sf.25: firmware version: 24.32.532
mlx5_core.sf mlx5_core.sf.23: mlx5_health_try_recover:387:(pid 40946): starting health recovery flow
mlx5_core 0000:03:00.0: mlx5_pci_slot_reset was called
mlx5_core 0000:03:00.0: wait vital counter value 0xab193 after 1 iterations
mlx5_core.sf mlx5_core.sf.23: firmware version: 24.32.532
mlx5_core.sf mlx5_core.sf.25: mlx5_cmd_check:813:(pid 40948): ENABLE_HCA(0x104) op_mod(0x0) failed,
status bad resource state(0x9), syndrome (0x658908)
mlx5_core.sf mlx5_core.sf.25: mlx5_function_setup:1292:(pid 40948): enable hca failed
mlx5_core.sf mlx5_core.sf.25: mlx5_health_try_recover:389:(pid 40948): health recovery failed
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case IRQ layer failed to find or to request irq, the driver is
printing the first cpu of the provided affinity as part of the error
print. Empty affinity is a valid input for the IRQ layer, and it is
an error to call cpumask_first() on empty affinity.
Remove the first cpu print from the error message.
Fixes: c36326d38d ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Hard coded CPU (0 in our case) might be offline. Hence, use the first
online CPU instead.
Fixes: f891b7cdbd ("net/mlx5: Enable single IRQ for PCI Function")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
On BlueField the E-Switch manager is the ECPF (vport 0xFFFE), but when
querying capabilities of ECPF eswitch manager, need to query vport 0
with other_vport = 0.
Fixes: 9091b821aa ("net/mlx5: DR, Handle eswitch manager and uplink vports separately")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The mlx5_get_uars_page() function returns error pointers.
Using IS_ERR() to check the return value to fix this.
Fixes: 4ec9e7b026 ("net/mlx5: DR, Expose steering domain functionality")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Spectrum ASICs do not support matching of VLAN ID at egress.
Currently, mlxsw driver forbids matching of all VLAN related fields at
egress, which is too strict check.
For example, the following filter is not supported by the driver:
$ tc filter add dev swpX egress protocol 802.1q pref 1 handle 101 flower
vlan_ethtype ipv4 src_ip .. dst_ip .. skip_sw action pass
Error: mlxsw_spectrum: vlan_id key is not supported on egress.
We have an error talking to the kernel
The filter above does not match on VLAN ID, but is bounced anyway.
Make the check more specific, forbid only matching of 'vlan_id' at egress.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) From Shay Drory: Devlink user knobs to control device's EQ size
This series provides knobs which will enable users to
minimize memory consumption of mlx5 Functions (PF/VF/SF).
mlx5 exposes two new generic devlink params for EQ size
configuration and uses devlink generic param max_macs.
LINK: https://lore.kernel.org/netdev/20211208141722.13646-1-shayd@nvidia.com/
2) From Tariq and Lama, allocate software channel objects and statistics
of a mlx5 netdevice private data dynamically upon first demand to save on
memory.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmHClsoACgkQSD+KveBX
+j5d6gf+NKH8mQd6Aa/Gt4Y2DtS7GzN+dPD+2MokuT2YSWU8kVGlMnC01MTE2V2s
jiOUC6ZEbayx2ORzd58XlcfAMEZz2WH8VGLXTdmM3niv13D7AueSsUP5SVK7Oamk
h0bwzOV8CE1Ru5s3Q3zPaLBqTWN+TmyG42HNwYyD8GZT7O5q8iBfor97N2KN5U5u
rhxzFcD2jfhtYxACkjea6RTN9CTM7l9FS4+DIjhu53PAOBaOZLj8NKSYUqP6I17L
ITJDd9za4Nq/YiB2yU4UVNkDEXsuXWoqnTNsL1oEUPForEomJsnikHV9ywzyKVMn
SbWdZOr5C14UBH9wyyauEBBv5oLB7w==
=cotW
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-12-21
1) From Shay Drory: Devlink user knobs to control device's EQ size
This series provides knobs which will enable users to
minimize memory consumption of mlx5 Functions (PF/VF/SF).
mlx5 exposes two new generic devlink params for EQ size
configuration and uses devlink generic param max_macs.
LINK: https://lore.kernel.org/netdev/20211208141722.13646-1-shayd@nvidia.com/
2) From Tariq and Lama, allocate software channel objects and statistics
of a mlx5 netdevice private data dynamically upon first demand to save on
memory.
* tag 'mlx5-updates-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Take packet_merge params directly from the RX res struct
net/mlx5e: Allocate per-channel stats dynamically at first usage
net/mlx5e: Use dynamic per-channel allocations in stats
net/mlx5e: Allow profile-specific limitation on max num of channels
net/mlx5e: Save memory by using dynamic allocation in netdev priv
net/mlx5e: Add profile indications for PTP and QOS HTB features
net/mlx5e: Use bitmap field for profile features
net/mlx5: Remove the repeated declaration
net/mlx5: Let user configure max_macs generic param
devlink: Clarifies max_macs generic devlink param
net/mlx5: Let user configure event_eq_size param
devlink: Add new "event_eq_size" generic device param
net/mlx5: Let user configure io_eq_size param
devlink: Add new "io_eq_size" generic device param
====================
Link: https://lore.kernel.org/r/20211222031604.14540-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable bytes is being used to summate slot lengths,
however the value is never used afterwards. The summation
is redundant so remove variable bytes.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211222003937.727325-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix an odd indent where some code was left indented, and causes smatch
to warn:
ice_log_pkg_init() warn: inconsistent indenting
While here, for consistency, add a break after the default case.
This commit has a Fixes: but we caught this while it was only in net-next.
Fixes: 247dd97d71 ("ice: Refactor status flow for DDP load")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20211221230538.2546315-1-jesse.brandeburg@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-12-21
This series contains updates to ice driver only.
Karol modifies the reset flow to correct issues with PTP reset.
Jake extends PTP support for E822 based devices. This includes a few
cleanup patches, that fix some minor issues. In addition, there are some
slight refactors to ease the addition of E822 support, followed by adding
the new hardware implementation ice_ptp_hw.c.
There are a few major differences with E822 support compared to E810
support:
*) The E822 device has a Clock Generation Unit which must be initialized in
order to generate proper clock frequencies on the output that drives the PTP
hardware clock registers
*) The E822 PHY is a bit different and requires a more complex
initialization procedure which must be rerun any time the link configuration
changes.
*) The E822 devices support enhanced timestamp calibration by making use of
a process called Vernier offset measurement. This allows the hardware to
measure phase offset related to the PHY clocks for Serdes and FEC, reducing
the inaccuracy of the timestamp relative to the actual packet transmission
and receipt. Making use of this requires data gathered from the first
transmitted and received packets, and waiting for the PHY to complete the
calibration measurements. This is done as part of a new kthread, ov_work.
Note that to avoid delay in enabling timestamps, we start the PHY in
'bypass' mode which allows timestamps to be captured without the Vernier
calibration measurement. Once the first packets have been sent and received,
we then complete the calibration setup and exit bypass mode and begin using
the more precise timestamps. According to the datasheet, timestamps without
calibration data can be incorrect relative to actual receipt or transmission
by up to 1 clock cycle (~1.25 nanoseconds), while calibrated timestamps
should be correct to within 1/8th of a clock cycle (~0.15 nanoseconds).
*) E822 devices support crosstimestamping via PCIe PTM, which we enable when
available on the platform.
There is a fair amount of logic required to perform PHY and CGU
initialization, which is the vast majority of the new code, but it is fairly
self contained within ice_ptp_hw.c, with the exception of monitoring for
offset validity being handled by a kthread.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: support crosstimestamping on E822 devices if supported
ice: exit bypass mode once hardware finishes timestamp calibration
ice: ensure the hardware Clock Generation Unit is configured
ice: implement basic E822 PTP support
ice: convert clk_freq capability into time_ref
ice: introduce ice_ptp_init_phc function
ice: use 'int err' instead of 'int status' in ice_ptp_hw.c
ice: PTP: move setting of tstamp_config
ice: introduce ice_base_incval function
ice: Fix E810 PTP reset flow
====================
Link: https://lore.kernel.org/r/20211221174845.3063640-1-anthony.l.nguyen@intel.com
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.
Fixes: 5a6681e22c ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.
Fixes: 5a6681e22c ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220135603.954944-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use auxiliary_get_drvdata and auxiliary_set_drvdata helpers.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20211221235852.323752-4-david.e.box@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because platform_get_irq() could fail and return error irq.
Therefore, it might be better to check it if order to avoid the use of
error irq.
Fixes: 797047f875 ("net: ks8851: Implement Parallel bus operations")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because platform_get_irq() could fail and return error irq.
Therefore, it might be better to check it if order to avoid the use of
error irq.
Fixes: ae150435b5 ("smsc: Move the SMC (SMSC) drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
As packet_merge params structure is saved on the RX resources structure, there
is no need to pass it separately.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Make stats allocation per-channel dynamic on demand, at channel open
operation.
Previously the stats array was pre-allocated for the maximum possible
number of channels. Here we defer the per-channel stats instance allocation
upon its first usage, so that it's allocated only if really needed.
Allocating stats on demand helps maintain a more memory-efficient code,
as we're saving memory when the used number of channels is smaller than
the maximum.
The stats memory instances are still freed in mlx5e_priv_arrays_free(),
so that they are persistent to channels' closure.
Memory size allocated for struct mlx5e_channel_stats is 3648 bytes.
If maximum number of channel stands for 64, the total memory space
allocated for stats is 3648x64 = 228K bytes. In scenarios where the
number of channels in use is significantly smaller than maximum number,
the memory saved can be remarkable.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Make stats array an array of pointer. This patch comes in to prepare for
the next patch where allocations of the stats are to be performed
dynamically on first usage.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Let SF/VF representor's netdev use profile-specific limitation on
max_nch to reduce its memory and HW resources consumption.
This is particularly important for environments with limited memory
and high number of SFs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Vu Pham <vuhuong@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Many arrays in priv are statically allocated with a pre-defined maximum
(for num channels, num TCs, etc...), that is in some cases significantly
larger than the actual maximum. Examples:
- The more VFs are supported, the less MSIX vectors each of them could
have. This limits the max_nch for each.
- Systems with limited number of cores or MSIX (< 64).
- Netdev profiles that do not support: QoS (DCB / HTB), PTP TX port
timestamping.
Here we save some amount of memory by moving several structures
and arrays to follow the actual maximum instead.
This patch also prepares the code for even more savings to follow.
For example, on a system where the maximum num of channel is 8,
the channels stats structs alone go down from 3648*64 = 228 KB to
3648*8 = 28.5 KB per interface.
This is important for environments with high number of VFs/SFs or
limited memory.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Let the profile indicate support of the PTP and HTB (QOS) features.
This unifies the logic that calculates the number of netdev queues needed
for the features, and allows simplification of mlx5e_create_netdev(),
which no longer requires number of rx/tx queues as parameters.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use a features bitmap field in mlx5e_profile to declare profile support
state of the different features. Let it replace the existing
rx_ptp_support boolean. It will be extended to cover more features in a
downstream patch.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Function 'mlx5_esw_vport_match_metadata_supported' and
'mlx5_esw_offloads_vport_metadata_set' are declared twice, so remove
the repeated declaration and blank line.
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, max_macs is taking 70Kbytes of memory per function. This
size is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the number of max_macs.
For example, to reduce the number of max_macs to 1, execute::
$ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
cmode driverinit
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Event EQ is an EQ which received the notification of almost all the
events generated by the NIC.
Currently, each event EQ is taking 512KB of memory. This size is not
needed in most use cases, and is critical with large scale. Hence,
allow user to configure the size of the event EQ.
For example to reduce event EQ size to 64, execute::
$ devlink dev param set pci/0000:00:0b.0 name event_eq_size value 64 \
cmode driverinit
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, each I/O EQ is taking 128KB of memory. This size
is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the size of I/O EQs.
For example, to reduce I/O EQ size to 64, execute:
$ devlink dev param set pci/0000:00:0b.0 name io_eq_size value 64 \
cmode driverinit
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Refactoring "PF still resetting" message, because previous version looked
like a bug - it informed about changes that worked as designed but might
confuse users. Changes requested to make message more user-friendly.
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The variable used for return status in `igb_write_xmdio_reg' function
is never changed and this function is just need return 0. Thus, the
`ret_val' can be removed and return 0 at the end of the
`igb_write_xmdio_reg' function.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
'MII_CR_FULL_DUPLEX' define not in use. This patch comes to tidy up
obsolete define.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
'IGC_CTRL_EXT_LINK_MODE_MASK' not in use. This patch comes to tidy up
obsolete define.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i225 devices use only spi nvm type. This patch comes to tidy up
obsolete nvm types.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
_phy_none type not in use. Clean up the code accordingly,
and get rid of the unused enum line
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
_I_PHY_ID not in use. Clean up the code accordingly,
and get rid of the unused define
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
E822 devices on supported platforms can generate a cross timestamp
between the platform ART and the device time. This process allows for
very precise measurement of the difference between the PTP hardware
clock and the platform time.
This is only supported if we know the TSC frequency relative to ART, so
we do not enable this unless the boot CPU has a known TSC frequency (as
required by convert_art_ns_to_tsc).
Because PCIe PTM support is not available on all platforms, introduce
CONFIG_ICE_HWTS and make it depend on X86 where we know the support
exists.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
