If the CQE size of the user space is not the size supported by the
hardware, the creation of CQ should be stopped.
Fixes: 09a5f210f6 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The size of CQE is different for different versions of hardware, so the
driver needs to specify the size of CQE explicitly.
Fixes: 09a5f210f6 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pointers should be printed with %p or %px rather than cast to 'unsigned
long long' and printed with %llx. Change %llx to %p to print the secured
pointer.
Fixes: 042a00f93a ("IB/{ipoib,hfi1}: Add a timeout handler for rdma_netdev")
Link: https://lore.kernel.org/r/20210922134857.619602-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Usnic VF doesn't need lock in atomic context to create QPs, so it is safe
to use mutex instead of spinlock. Such change fixes the following smatch
error.
Smatch static checker warning:
lib/kobject.c:289 kobject_set_name_vargs()
warn: sleeping in atomic context
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/2a0e295786c127e518ebee8bb7cafcb819a625f6.1631520231.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Local and remote invalidate operations are not allowed by IBA for MRs
created by (re)register memory verbs. This patch checks the MR type in
rxe_invalidate_mr().
Link: https://lore.kernel.org/r/20210914164206.19768-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For fast memory regions create duplicate mapping tables so ib_map_mr_sg()
can build a new mapping table which is then swapped into place
synchronously with the execution of an IB_WR_REG_MR work request.
Currently the rxe driver uses the same table for receiving RDMA operations
and for building new tables in preparation for reusing the MR. This
exposes users to potentially incorrect results.
Link: https://lore.kernel.org/r/20210914164206.19768-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Separate software and simulated hardware lkeys and rkeys for MRs and MWs.
This makes struct ib_mr and struct ib_mw isolated from hardware changes
triggered by executing work requests.
This change fixes a bug seen in blktest.
Link: https://lore.kernel.org/r/20210914164206.19768-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Eliminate RXE_MR_STATE_ZOMBIE which is not compatible with IBA.
RXE_MR_STATE_INVALID is better.
Replace RXE_MR_TYPE_XXX by IB_MR_TYPE_XXX which covers all the needed
types.
Link: https://lore.kernel.org/r/20210914164206.19768-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Earlier patches added memory barriers to protect user space to kernel
space communications. The user space queues were previously shown to have
occasional memory synchonization errors which were removed by adding
smp_load_acquire, smp_store_release barriers. This patch extends that to
the case where queues are used between kernel space threads.
This patch also extends the queue types to include kernel ULP queues which
access the other end of the queues in kernel verbs calls like poll_cq and
post_send/recv.
Link: https://lore.kernel.org/r/20210914164206.19768-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
gcc 8.3 and 5.4 throw this:
In function 'modify_qp_init_to_rtr',
././include/linux/compiler_types.h:322:38: error: call to '__compiletime_assert_1859' declared with attribute error: FIELD_PREP: value too large for the field
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
[..]
drivers/infiniband/hw/hns/hns_roce_common.h:91:52: note: in expansion of macro 'FIELD_PREP'
*((__le32 *)ptr + (field_h) / 32) |= cpu_to_le32(FIELD_PREP( \
^~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_common.h:95:39: note: in expansion of macro '_hr_reg_write'
#define hr_reg_write(ptr, field, val) _hr_reg_write(ptr, field, val)
^~~~~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4412:2: note: in expansion of macro 'hr_reg_write'
hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini);
Because gcc has miscalculated the constantness of lp_pktn_ini:
mtu = ib_mtu_enum_to_int(ib_mtu);
if (WARN_ON(mtu < 0)) [..]
lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu);
Since mtu is limited to {256,512,1024,2048,4096} lp_pktn_ini is between 4
and 8 which is compatible with the 4 bit field in the FIELD_PREP.
Work around this broken compiler by adding a 'can never be true'
constraint on lp_pktn_ini's value which clears out the problem.
Fixes: f0cb411aad ("RDMA/hns: Use new interface to modify QP context")
Link: https://lore.kernel.org/r/0-v1-c773ecb137bc+11f-hns_gcc8_jgg@nvidia.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The FSM can run in a circle allowing rdma_resolve_ip() to be called twice
on the same id_priv. While this cannot happen without going through the
work, it violates the invariant that the same address resolution
background request cannot be active twice.
CPU 1 CPU 2
rdma_resolve_addr():
RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY
rdma_resolve_ip(addr_handler) #1
process_one_req(): for #1
addr_handler():
RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND
mutex_unlock(&id_priv->handler_mutex);
[.. handler still running ..]
rdma_resolve_addr():
RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY
rdma_resolve_ip(addr_handler)
!! two requests are now on the req_list
rdma_destroy_id():
destroy_id_handler_unlock():
_destroy_id():
cma_cancel_operation():
rdma_addr_cancel()
// process_one_req() self removes it
spin_lock_bh(&lock);
cancel_delayed_work(&req->work);
if (!list_empty(&req->list)) == true
! rdma_addr_cancel() returns after process_on_req #1 is done
kfree(id_priv)
process_one_req(): for #2
addr_handler():
mutex_lock(&id_priv->handler_mutex);
!! Use after free on id_priv
rdma_addr_cancel() expects there to be one req on the list and only
cancels the first one. The self-removal behavior of the work only happens
after the handler has returned. This yields a situations where the
req_list can have two reqs for the same "handle" but rdma_addr_cancel()
only cancels the first one.
The second req remains active beyond rdma_destroy_id() and will
use-after-free id_priv once it inevitably triggers.
Fix this by remembering if the id_priv has called rdma_resolve_ip() and
always cancel before calling it again. This ensures the req_list never
gets more than one item in it and doesn't cost anything in the normal flow
that never uses this strange error path.
Link: https://lore.kernel.org/r/0-v1-3bc675b8006d+22-syz_cancel_uaf_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: e51060f08a ("IB: IP address based RDMA connection manager")
Reported-by: syzbot+dc3dfba010d7671e05f5@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the state is not idle then rdma_bind_addr() will immediately fail and
no change to global state should happen.
For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():
if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)
To view a mangled src_addr, eg with a IPv6 loopback address but an IPv4
family, failing the test.
This would manifest as this trace from syzkaller:
BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204
CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
__list_add_valid+0x93/0xa0 lib/list_debug.c:26
__list_add include/linux/list.h:67 [inline]
list_add_tail include/linux/list.h:100 [inline]
cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
vfs_write+0x28e/0xa30 fs/read_write.c:603
ksys_write+0x1ee/0x250 fs/read_write.c:658
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Which is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().
Instead of trying to re-use the src_addr memory to indirectly create an
any address build one explicitly on the stack and bind to that as any
other normal flow would do.
Link: https://lore.kernel.org/r/0-v1-9fbb33f5e201+2a-cma_listen_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 732d41c545 ("RDMA/cma: Make the locking for automatic state transition more clear")
Reported-by: syzbot+6bb0528b13611047209c@syzkaller.appspotmail.com
Tested-by: Hao Sun <sunhao.th@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the retry counter exceeds, as the remote QP didn't send any Ack or
Nack an asynchronous event (AE) for too many retries is generated. Add
code to handle the AE and set the correct IB WC error code
IB_WC_RETRY_EXC_ERR.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210916191222.824-4-shiraz.saleem@intel.com
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Due to duplicate reset flags, CQP commands are processed during reset.
This leads CQP failures such as below:
irdma0: [Delete Local MAC Entry Cmd Error][op_code=49] status=-27 waiting=1 completion_err=0 maj=0x0 min=0x0
Remove the redundant flag and set the correct reset flag so CPQ is paused
during reset
Fixes: 8498a30e1b ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
Link: https://lore.kernel.org/r/20210916191222.824-2-shiraz.saleem@intel.com
Reported-by: LiLiang <liali@redhat.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.
Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
FRMR WQE requires to provide the log2 value of the PBL and page size. Use
the standard ilog2() to calculate the log2 value
Link: https://lore.kernel.org/r/1631709163-2287-11-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use GFP_KERNEL instead of GFP_ATOMIC while allocating control path
structures which will be only called from non atomic context
Link: https://lore.kernel.org/r/1631709163-2287-10-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the FRMR is allocated with single page, driver is attempting to
create a level 0 HWQ and not allocating any page because the nopte field
is set. This causes the crash during post_send as the pbl is not
populated.
To avoid this crash, check for the nopte bit during HWQ creation with
single page and create a level 1 page table and populate the pbl address
correctly.
Link: https://lore.kernel.org/r/1631709163-2287-9-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fill the missing parameters for the FW command while querying SRQ.
Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/1631709163-2287-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW can support multiple page sizes. Enable bits for enabling sizes from 4k
to 1G by reporting page_size_cap.
Link: https://lore.kernel.org/r/1631709163-2287-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver has 1ms delay between the polling for atomic command completion.
Polling immediately after issuing command usually doesn't report any
completions. So all commands in the blocking path needs two iterations. So
effectively 1ms spend on each command. HW requires much lesser time for
each command. So reduce the delay to 1us and increase the iteration count
to wait for the same time.
Link: https://lore.kernel.org/r/1631709163-2287-5-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use separate buffers for the request and response data. Eventhough the
response data is not used, providing the correct length is appropriate.
Link: https://lore.kernel.org/r/1631709163-2287-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update a statistics counter name as the interface structure got updated.
Fixes: 9d6b648c31 ("bnxt_en: Update firmware interface spec to 1.10.1.65.")
Link: https://lore.kernel.org/r/1631709163-2287-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement extended statistics counters for newer adapters. Check if the FW
support for this command and issue the FW command only if is
supported. Includes code re-organization to handle extended stats. Also,
add AH and PD software counters.
Link: https://lore.kernel.org/r/1631709163-2287-2-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If cma_listen_on_all() fails it leaves the per-device ID still on the
listen_list but the state is not set to RDMA_CM_ADDR_BOUND.
When the cmid is eventually destroyed cma_cancel_listens() is not called
due to the wrong state, however the per-device IDs are still holding the
refcount preventing the ID from being destroyed, thus deadlocking:
task:rping state:D stack: 0 pid:19605 ppid: 47036 flags:0x00000084
Call Trace:
__schedule+0x29a/0x780
? free_unref_page_commit+0x9b/0x110
schedule+0x3c/0xa0
schedule_timeout+0x215/0x2b0
? __flush_work+0x19e/0x1e0
wait_for_completion+0x8d/0xf0
_destroy_id+0x144/0x210 [rdma_cm]
ucma_close_id+0x2b/0x40 [rdma_ucm]
__destroy_id+0x93/0x2c0 [rdma_ucm]
? __xa_erase+0x4a/0xa0
ucma_destroy_id+0x9a/0x120 [rdma_ucm]
ucma_write+0xb8/0x130 [rdma_ucm]
vfs_write+0xb4/0x250
ksys_write+0xb5/0xd0
? syscall_trace_enter.isra.19+0x123/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Ensure that cma_listen_on_all() atomically unwinds its action under the
lock during error.
Fixes: c80a0c52d8 ("RDMA/cma: Add missing error handling of listen_id")
Link: https://lore.kernel.org/r/20210913093344.17230-1-thomas.liu@ucloud.cn
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The port->attr.port_cap_flags should be set to enum
ib_port_capability_mask_bits in ib_mad.h, not
RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210831083223.65797-1-weijunji@bytedance.com
Signed-off-by: Junji Wei <weijunji@bytedance.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ROCE uses IGMP for Multicast instead of the native Infiniband system where
joins are required in order to post messages on the Multicast group. On
Ethernet one can send Multicast messages to arbitrary addresses without
the need to subscribe to a group.
So ROCE correctly does not send IGMP joins during rdma_join_multicast().
F.e. in cma_iboe_join_multicast() we see:
if (addr->sa_family == AF_INET) {
if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) {
ib.rec.hop_limit = IPV6_DEFAULT_HOPLIMIT;
if (!send_only) {
err = cma_igmp_send(ndev, &ib.rec.mgid,
true);
}
}
} else {
So the IGMP join is suppressed as it is unnecessary.
However no such check is done in destroy_mc(). And therefore leaving a
sendonly multicast group will send an IGMP leave.
This means that the following scenario can lead to a multicast receiver
unexpectedly being unsubscribed from a MC group:
1. Sender thread does a sendonly join on MC group X. No IGMP join
is sent.
2. Receiver thread does a regular join on the same MC Group x.
IGMP join is sent and the receiver begins to get messages.
3. Sender thread terminates and destroys MC group X.
IGMP leave is sent and the receiver no longer receives data.
This patch adds the same logic for sendonly joins to destroy_mc() that is
also used in cma_iboe_join_multicast().
Fixes: ab15c95a17 ("IB/core: Support for CMA multicast join flags")
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2109081340540.668072@gentwo.de
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
clang becomes confused due to the comparison to NULL in a integer constant
expression context:
>> drivers/infiniband/hw/qib/qib_sysfs.c:413:1: error: static_assert expression is not an integral constant expression
QIB_DIAGC_ATTR(rc_resends);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_sysfs.c:406:16: note: expanded from macro 'QIB_DIAGC_ATTR'
static_assert(&((struct qib_ibport *)0)->rvp.n_##N != (u64 *)NULL); \
Nathan found __same_type that solves this problem nicely, so use it instead.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An important error case regression fixes in mlx5:
- Wrong size used when computing the error path smaller allocation request
leads to corruption
- Confusing but ultimately harmless alignment mis-calculation
- Static checker warnings:
Null pointer subtraction in qib
kcalloc in bnxt_re
Missing static on global variable in hfi1
-----BEGIN PGP SIGNATURE-----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=Sg6A
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"I don't usually send a second PR in the merge window, but the fix to
mlx5 is significant enough that it should start going through the
process ASAP. Along with it comes some of the usual -rc stuff that
would normally wait for a -rc2 or so.
Summary:
Important error case regression fixes in mlx5:
- Wrong size used when computing the error path smaller allocation
request leads to corruption
- Confusing but ultimately harmless alignment mis-calculation
Static checker warning fixes:
- NULL pointer subtraction in qib
- kcalloc in bnxt_re
- Missing static on global variable in hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/hfi1: make hist static
RDMA/bnxt_re: Prefer kcalloc over open coded arithmetic
IB/qib: Fix null pointer subtraction compiler warning
RDMA/mlx5: Fix xlt_chunk_align calculation
RDMA/mlx5: Fix number of allocated XLT entries
This symbol is not used outside of trace.c, so marks it static.
Fix the following sparse warning:
drivers/infiniband/hw/hfi1/trace.c:491:23: warning: symbol 'hist' was not declared. Should it be static?
Link: https://lore.kernel.org/r/1630921723-21545-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As noted in the "Deprecated Interfaces, Language Features, Attributes, and
Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead to
values wrapping around and a smaller allocation being made than the caller
was expecting. Using those allocations could lead to linear overflows of
heap memory and other misbehaviors.
In this case this is not actually dynamic sizes: both sides of the
multiplication are constant values. However it is best to refactor this
anyway, just to keep the open-coded math idiom out of code.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Also, remove the unnecessary initialization of the sqp_tbl variable since
it is set a few lines later.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://lore.kernel.org/r/20210905081812.17113-1-len.baker@gmx.com
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
>> drivers/infiniband/hw/qib/qib_sysfs.c:411:1: warning: performing pointer subtraction with a null pointer has undefined behavior
+[-Wnull-pointer-subtraction]
QIB_DIAGC_ATTR(rc_resends);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_sysfs.c:408:51: note: expanded from macro 'QIB_DIAGC_ATTR'
.counter = &((struct qib_ibport *)0)->rvp.n_##N - (u64 *)0, \
Use offsetof and accomplish the type check using static_assert.
Fixes: 4a7aaf88c8 ("RDMA/qib: Use attributes for the port sysfs")
Link: https://lore.kernel.org/r/0-v1-43ae3c759177+65-qib_type_jgg@nvidia.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The XLT chunk alignment depends on ent_size not sizeof(ent_size) aka
sizeof(size_t). The incoming ent_size is either 8 or 16, so the
miscalculation when 16 is required is only an over-alignment and
functional harmless.
Fixes: 8010d74b99 ("RDMA/mlx5: Split the WR setup out of mlx5_ib_update_xlt()")
Link: https://lore.kernel.org/r/20210908081849.7948-2-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In commit 8010d74b99 ("RDMA/mlx5: Split the WR setup out of
mlx5_ib_update_xlt()") the allocation logic was split out of
mlx5_ib_update_xlt() and the logic was changed to enable better OOM
handling. Sadly this change introduced a miscalculation of the number of
entries that were actually allocated when under memory pressure where it
can actually become 0 which on s390 lets dma_map_single() fail.
It can also lead to corruption of the free pages list when the wrong
number of entries is used in the calculation of sg->length which is used
as argument for free_pages().
Fix this by using the allocation size instead of misusing get_order(size).
Cc: stable@vger.kernel.org
Fixes: 8010d74b99 ("RDMA/mlx5: Split the WR setup out of mlx5_ib_update_xlt()")
Link: https://lore.kernel.org/r/20210908081849.7948-1-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas). The core change causing the most
churn was replacing the command request field request with a macro,
allowing us to offset map to it and remove the redundant field; the
same was also done for the tag field. The most impactful change is
the final removal of scsi_ioctl, which has been deprecated for over a
decade.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
hC3BUEW8f2LLnujWanQ=
=lC5o
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs core
code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation
-----BEGIN PGP SIGNATURE-----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=ZwOe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
From Maor Gottlieb
====================
Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.
Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
In order to create DCS QPs, we don't need to rely on both
log_max_dci_stream_channels and log_max_dci_errored_streams capabilities.
Fixes: 11656f593a ("RDMA/mlx5: Add DCS offload support")
Link: https://lore.kernel.org/r/3e7b3363fd73686176cc584295e86832a7cf99b2.1630320354.git.leonro@nvidia.com
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB specification, the destination qpn is allowed to be
filled into the qpc only when the qp transitions from Init to RTR, so this
code is unused.
Link: https://lore.kernel.org/r/1629985056-57004-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The resp passed to the user space represents the enable flag of qp,
incomplete assignment will cause some features of the user space to be
disabled.
Fixes: 90ae0b57e4 ("RDMA/hns: Combine enable flags of qp")
Fixes: aba457ca89 ("RDMA/hns: Support owner mode doorbell")
Link: https://lore.kernel.org/r/1629985056-57004-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
dip_idx and dgid should be a one-to-one mapping relationship, but when
qp_num loops back to the start number, it may happen that two different
dgid are assiociated to the same dip_idx incorrectly.
One solution is to store the qp_num that is not assigned to dip_idx in an
array. When a dip_idx needs to be allocated to a new dgid, an spare qp_num
is extracted and assigned to dip_idx.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the dgid-dip_idx mapping relationship exists, dip should be assigned.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
dip_idx is associated with qp_num whose data type is u32. However, dip_idx
is incorrectly defined as u8 data in the hns_roce_dip struct, which leads
to data truncation during value assignment.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In RNR NAK screnario, according to the specification, when no credit is
available, only the first fragment of the send request can be sent. The
LSN(Limit Sequence Number) field should be 0 or the entire packet will be
resent.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1629883169-2306-1-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A MAD packet is sent as an unreliable datagram (UD). SA requests are sent
as MAD packets. As such, SA requests or responses may be silently dropped.
IB Core's MAD layer has a timeout and retry mechanism, which amongst
other, is used by RDMA CM. But it is not used by SA queries. The lack of
retries of SA queries leads to long specified timeout, and error being
returned in case of packet loss. The ULP or user-land process has to
perform the retry.
Fix this by taking advantage of the MAD layer's retry mechanism.
First, a check against a zero timeout is added in rdma_resolve_route(). In
send_mad(), we set the MAD layer timeout to one tenth of the specified
timeout and the number of retries to 10. The special case when timeout is
less than 10 is handled.
With this fix:
# ucmatose -c 1000 -S 1024 -C 1
runs stable on an Infiniband fabric. Without this fix, we see an
intermittent behavior and it errors out with:
cmatose: event: RDMA_CM_EVENT_ROUTE_ERROR, error: -110
(110 is ETIMEDOUT)
Link: https://lore.kernel.org/r/1628784755-28316-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This allows using the normal sg_table APIs and makes all the code
cleaner. Remove sgt, nents and nmapd from ib_umem.
Link: https://lore.kernel.org/r/20210824142531.3877007-4-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
orig_nents should represent the number of entries with pages,
but __sg_alloc_table_from_pages sets orig_nents as the number of
total entries in the table. This is wrong when the API is used for
dynamic allocation where not all the table entries are mapped with
pages. It wasn't observed until now, since RDMA umem who uses this
API in the dynamic form doesn't use orig_nents implicit or explicit
by the scatterlist APIs.
Fix it by changing the append API to track the SG append table
state and have an API to free the append table according to the
total number of entries in the table.
Now all APIs set orig_nents as number of enries with pages.
Fixes: 07da1223ec ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20210824142531.3877007-3-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
RDMA is the only in-kernel user that uses __sg_alloc_table_from_pages to
append pages dynamically. In the next patch. That mode will be extended
and that function will get more parameters. So separate it into a unique
function to make such change more clear.
Link: https://lore.kernel.org/r/20210824142531.3877007-2-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to support more coalesce parameters through netlink,
add two new parameter kernel_coal and extack for .set_coalesce
and .get_coalesce, then some extra info can return to user with
the netlink API.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The resources that use the hns bitmap interface: qp, cq, mr, pd, xrcd,
uar, srq, have been changed to IDA interfaces, and the unused hns' own
bitmap interfaces need to be deleted.
Link: https://lore.kernel.org/r/1629336980-17499-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch srq index allocation and release from hns' own bitmap interface to
IDA interface.
Link: https://lore.kernel.org/r/1629336980-17499-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch uar index allocation and release from hns' own bitmap interface to
IDA interface.
Link: https://lore.kernel.org/r/1629336980-17499-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ownerbit mode is for external card mode. Make it controlled by the
firmware.
Fixes: aba457ca89 ("RDMA/hns: Support owner mode doorbell")
Link: https://lore.kernel.org/r/1629539607-33217-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CMDQ support un-interrupt mode only, and firmware ignores this mode flag,
so remove it.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1629539607-33217-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The vector field naming is quite confusing, it is better referred to as
irqn.
Link: https://lore.kernel.org/r/20210811151131.39138-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cpu field in efa_irq struct is unused, remove it.
Link: https://lore.kernel.org/r/20210811151131.39138-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Casting to (void) does nothing, remove them.
Link: https://lore.kernel.org/r/20210806112112.124313-7-haris.iqbal@ionos.com
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are mis-match at counting inflight IO after changing the multipath
policy.
For example, we started fio test with round-robin policy and then we
changed the policy to min-inflight. IOs created under the RR policy is
finished under the min-inflight policy and inflight counter only
decreased. So the counter would be negative value. And also we started
fio test with min-inflight policy and changed the policy to the
round-robin. IOs created under the min-inflight policy increased the
inflight IO counter but the inflight IO counter was not decreased because
the policy was the round-robin when IO was finished.
So it should count IOs only if the IO is created under the min-inflight
policy. It should not care the policy when the IO is finished.
This patch adds a field mp_policy in struct rtrs_clt_io_req and stores the
multipath policy when an object of rtrs_clt_io_req is created. Then
rtrs-clt checks the mp_policy of only struct rtrs_clt_io_req instead of
the struct rtrs_clt.
Link: https://lore.kernel.org/r/20210806112112.124313-6-haris.iqbal@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IO performance test with fio after swapping the likely and unlikely
macros in all if-statement shows no difference. They do not help for the
performance of rtrs.
Thanks to Haakon Bugge for the test scenario.
The fio test did random read on 32 rnbd devices and 64 processes.
Test environment:
- Intel(R) Xeon(R) Gold 6130 CPU @ 2.10GHz
- 376G memory
- kernel version: 5.4.86
- gcc version: gcc (Debian 8.3.0-6) 8.3.0
- Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5]
Test result:
- before swapping: IOPS=829k, BW=3239MiB/s
- after swapping: IOPS=829k, BW=3238MiB/s
- remove all (un)likely: IOPS=829k, BW=3238MiB/s
Link: https://lore.kernel.org/r/20210806112112.124313-5-haris.iqbal@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The two functions are unused, so just remove them.
Link: https://lore.kernel.org/r/20210806112112.124313-3-haris.iqbal@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When all the paths are removed for a session, the addition of the first
path is like a new session for the storage server.
Hence, for_new_clt has to be set to 1.
Link: https://lore.kernel.org/r/20210806112112.124313-2-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Saeed Mahameed says:
====================
This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.
1) mlx5 single E-Switch FDB for lag
2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
3) Add DCS caps & fields support
We need this in net-next as multiple features are dependent on the
single FDB feature.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* mellanox/mlx5-next:
net/mlx5: Lag, Create shared FDB when in switchdev mode
net/mlx5: E-Switch, add logic to enable shared FDB
net/mlx5: Lag, move lag destruction to a workqueue
net/mlx5: Lag, properly lock eswitch if needed
net/mlx5: Add send to vport rules on paired device
net/mlx5: E-Switch, Add event callback for representors
net/mlx5e: Use shared mappings for restoring from metadata
net/mlx5e: Add an option to create a shared mapping
net/mlx5: E-Switch, set flow source for send to uplink rule
RDMA/mlx5: Add shared FDB support
{net, RDMA}/mlx5: Extend send to vport rules
RDMA/mlx5: Fill port info based on the relevant eswitch
net/mlx5: Lag, add initial logic for shared FDB
net/mlx5: Return mdev from eswitch
IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
1) New index member of struct rxe_queue was introduced but not zeroed so
the initial value of index may be random.
2) The current index is not masked off to index_mask.
In this case producer_addr() and consumer_addr() will get an invalid
address by the random index and then accessing the invalid address
triggers the following panic:
"BUG: unable to handle page fault for address: ffff9ae2c07a1414"
Fix the issue by using kzalloc() to zero out index member.
Fixes: 5bcf5a59c4 ("RDMA/rxe: Protext kernel index from user space")
Link: https://lore.kernel.org/r/20210820111509.172500-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make sure to free the IRQ vectors in case the allocation doesn't return
the expected number of IRQs.
Fixes: b7f5e880f3 ("RDMA/efa: Add the efa module")
Link: https://lore.kernel.org/r/20210811151131.39138-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_mcast_add_grp_elem() in rxe_mcast.c calls rxe_alloc() while holding
spinlocks which in turn calls kzalloc(size, GFP_KERNEL) which is
incorrect. This patch replaces rxe_alloc() by rxe_alloc_locked() which
uses GFP_ATOMIC. This bug was caused by the below mentioned commit and
failing to handle the need for the atomic allocate.
Fixes: 4276fd0ddd ("RDMA/rxe: Remove RXE_POOL_ATOMIC")
Link: https://lore.kernel.org/r/20210813210625.4484-1-rpearsonhpe@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The fixed commit removes all rtnl_lock() and rtnl_unlock() calls in
function bnxt_re_dev_init(), but forgets to remove a rtnl_unlock() in the
error handling path of bnxt_re_register_netdev(), which may cause a
deadlock. This bug is suggested by a static analysis tool.
Fixes: c2b777a959 ("RDMA/bnxt_re: Refactor device add/remove functionalities")
Link: https://lore.kernel.org/r/20210816085531.12167-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_sa_service_rec_query() was introduced in kernel v2.6.13 by
commit cbae32c563 ("[PATCH] IB: Add Service Record support to SA client")
in 2005. It was not used then and have never been used since.
Removing it and related functions/structs.
Link: https://lore.kernel.org/r/1628702736-12651-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Qedr code is tightly coupled with existing both INIT transitions. Here,
during first INIT transition all variables are reset and the RESET state
is checked in post_recv() before any posting.
Commit dc70f7c3ed ("RDMA/cma: Remove unnecessary INIT->INIT transition")
exposed this bug.
So moving variables reset to qedr_set_common_qp_params() and also avoid
RESET state check for post_recv().
Link: https://lore.kernel.org/r/20210811051650.14914-1-pkushwaha@marvell.com
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Just use seq_write to copy the stats into the seq_file buffer instead of
poking holes into the seq_file abstraction.
Link: https://lore.kernel.org/r/20210810151711.1795374-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmalloc_array() is called to allocate memory for tx->descp. If it fails,
the function __sdma_txclean() is called:
__sdma_txclean(dd, tx);
However, in the function __sdma_txclean(), tx-descp is dereferenced if
tx->num_desc is not zero:
sdma_unmap_desc(dd, &tx->descp[0]);
To fix this possible null-pointer dereference, assign the return value of
kmalloc_array() to a local variable descp, and then assign it to tx->descp
if it is not NULL. Otherwise, go to enomem.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If re-registering an MR in hns_roce_rereg_user_mr(), we should return NULL
instead of passing 0 to ERR_PTR for clarity.
Fixes: 4e9fc1dae2 ("RDMA/hns: Optimize the MR registration process")
Link: https://lore.kernel.org/r/20210804125939.20516-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In Kconfig, references to config symbols do not use the prefix "CONFIG_".
Commit fa0cf568fd ("RDMA/irdma: Add irdma Kconfig/Makefile and remove
i40iw") selects config CONFIG_AUXILIARY_BUS in config INFINIBAND_IRDMA,
but intended to select config AUXILIARY_BUS.
Fixes: fa0cf568fd ("RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw")
Link: https://lore.kernel.org/r/20210817084158.10095-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The dmabuf memory registrations are missing the restrack handling and
hence do not appear in rdma tool.
Fixes: bfe0cc6eb2 ("RDMA/uverbs: Add uverbs command for dma-buf based MR registration")
Link: https://lore.kernel.org/r/20210812135607.6228-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the below crash when deleting a slave from the unaffiliated list
twice. First time when the slave is bound to the master and the second
when the slave is unloaded.
Fix it by checking if slave is unaffiliated (doesn't have ib device)
before removing from the list.
RIP: 0010:mlx5r_mp_remove+0x4e/0xa0 [mlx5_ib]
Call Trace:
auxiliary_bus_remove+0x18/0x30
__device_release_driver+0x177/x220
device_release_driver+0x24/0x30
bus_remove_device+0xd8/0x140
device_del+0x18a/0x3e0
mlx5_rescan_drivers_locked+0xa9/0x210 [mlx5_core]
mlx5_unregister_device+0x34/0x60 [mlx5_core]
mlx5_uninit_one+0x32/0x100 [mlx5_core]
remove_one+0x6e/0xe0 [mlx5_core]
pci_device_remove+0x36/0xa0
__device_release_driver+0x177/0x220
device_driver_detach+0x3c/0xa0
unbind_store+0x113/0x130
kernfs_fop_write_iter+0x110/0x1a0
new_sync_write+0x116/0x1a0
vfs_write+0x1ba/0x260
ksys_write+0x5f/0xe0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 93f8244431 ("RDMA/mlx5: Convert mlx5_ib to use auxiliary bus")
Link: https://lore.kernel.org/r/17ec98989b0ba88f7adfbad68eb20bce8d567b44.1628587493.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
can and ieee802154.
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid
dma mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans
on idle systems to prevent frequent wake ups
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=hzDl
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, bpf, can and
ieee802154.
The size of this is pretty normal, but we got more fixes for 5.14
changes this week than last week. Nothing major but the trend is the
opposite of what we like. We'll see how the next week goes..
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid dma
mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across
suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via
netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is
out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans on idle systems to
prevent frequent wake ups"
* tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
vsock/virtio: avoid potential deadlock when vsock device remove
wwan: core: Avoid returning NULL from wwan_create_dev()
net: dsa: sja1105: unregister the MDIO buses during teardown
Revert "tipc: Return the correct errno code"
net: mscc: Fix non-GPL export of regmap APIs
net: igmp: increase size of mr_ifc_count
MAINTAINERS: switch to my OMP email for Renesas Ethernet drivers
tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
net: pcs: xpcs: fix error handling on failed to allocate memory
net: linkwatch: fix failure to restore device state across suspend/resume
net: bridge: fix memleak in br_add_if()
net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
net: bridge: fix flags interpretation for extern learn fdb entries
net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
bpf, core: Fix kernel-doc notation
net: igmp: fix data-race in igmp_ifc_timer_expire()
net: Fix memory leak in ieee802154_raw_deliver
...
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-10-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-9-bvanassche@acm.org
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saeed Mahameed says:
====================
pull-request: mlx5-next 2020-08-9
This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.
1) mlx5 single E-Switch FDB for lag
2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
3) Add DCS caps & fields support
[1] https://patchwork.kernel.org/project/netdevbpf/cover/20210803231959.26513-1-saeed@kernel.org/
[2] 0e3364dab7.1626609184.git.leonro@nvidia.com/
[3] 55e1d69bef.1624258894.git.leonro@nvidia.com/
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Lag, Create shared FDB when in switchdev mode
net/mlx5: E-Switch, add logic to enable shared FDB
net/mlx5: Lag, move lag destruction to a workqueue
net/mlx5: Lag, properly lock eswitch if needed
net/mlx5: Add send to vport rules on paired device
net/mlx5: E-Switch, Add event callback for representors
net/mlx5e: Use shared mappings for restoring from metadata
net/mlx5e: Add an option to create a shared mapping
net/mlx5: E-Switch, set flow source for send to uplink rule
RDMA/mlx5: Add shared FDB support
{net, RDMA}/mlx5: Extend send to vport rules
RDMA/mlx5: Fill port info based on the relevant eswitch
net/mlx5: Lag, add initial logic for shared FDB
net/mlx5: Return mdev from eswitch
IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
net/mlx5: Add DCS caps & fields support
====================
Link: https://lore.kernel.org/r/20210809202522.316930-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CQ destroy is performed based on the IRQ number that is stored in
cq->irqn. That number wasn't set explicitly during CQ creation and as
expected some of the API users of mlx5_core_create_cq() forgot to update
it.
This caused to wrong synchronization call of the wrong IRQ with a number
0 instead of the real one.
As a fix, set the IRQ number directly in the mlx5_core_create_cq() and
update all users accordingly.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Fixes: ef1659ade3 ("IB/mlx5: Add DEVX support for CQ events")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Previous atomic increment/decrement logic expects the atomic count to be
'0' after the final decrement.
Replacing atomic count with refcount does not allow that, as
refcount_dec() considers count of 1 as underflow and triggers a kernel
splat.
Fix the current refcount logic by using the usual pattern of decrementing
the refcount and test if it is '0' on the final deref in
c4iw_destroy_cq(). Use wait_for_completion() instead of wait_event().
Fixes: 7183451f84 ("RDMA/cxgb4: Use refcount_t instead of atomic_t for reference counting")
Link: https://lore.kernel.org/r/1628167412-12114-1-git-send-email-dakshaja@chelsio.com
Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Shared FDB allows to create a single RDMA device that holds representors
from both eswitches. As shared FDB is only active when both uplink
representors are enslaved there is a single RDMA port that represents
both uplinks.
The number of ports is the number of vports on both eswitches minus one
as we only need 1 port for both uplinks.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In shared FDB there is only one eswitch which is active and it receives
traffic from all representors and all vports in the HCA.
While the Ethernet representor will always reside on its native PF
the IB representor will not. Extend send to vport rule creation to
support such flows. Need to account for source vport that sends the
traffic (on which the representors resides) and the target eswitch
the traffic which reach.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In shared FDB a single RDMA device can have representors that are
connected to two different eswitches. Use the right eswitch when
preparing the response to userspace.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The QP usecnts were incremented through QP attributes structure while
decreased through QP itself. Rely on the ib_creat_qp_user() code that
initialized all QP parameters prior returning to the user and increment
exactly like destroy does.
Link: https://lore.kernel.org/r/25d256a3bb1fc480b77d7fe439817b993de48610.1628014762.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All QP creation flows called ib_create_qp_security(), but differently.
This caused to the need to provide exclusion conditions for the XRC_TGT,
because such QP already had selinux configuration call.
In order to fix it, move ib_create_qp_security() to the general QP
creation routine.
Link: https://lore.kernel.org/r/4d7cd6f5828aca37fb62283e6b126b73ab86b18c.1628014762.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The low-level create QP function grew to be larger than any sensible
inline function should be. The inline attribute is not really needed for
that function and can be implemented as exported symbol.
Link: https://lore.kernel.org/r/2c08709d86f876c3dfb77684357b2a939e570ca4.1628014762.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ib_create_named_qp() is kernel verb that is not used for user supplied
attributes. In such case, it is ULP responsibility to provide valid QP
attributes.
In-kernel API shouldn't check it, exactly like other functions that don't
check device capabilities.
Link: https://lore.kernel.org/r/b9b9e981d1af148b750750196e686199dbbf61f8.1628014762.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ib_create_named_qp() is kernel verb and no kernel users exist that use
XRC_INI QP. Hence such QP path is not reachable. In addition, delete
duplicated assignments of QP attributes from the initialization structure.
Link: https://lore.kernel.org/r/1b4c0d1def5f8f6d26839e14d19da950cc4a0b05.1628014762.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no real value in bypassing IB/core APIs for creating standard
objects with standard types. The open-coded variant didn't have any
restrack task management calls and caused to such objects to be not
present when running rdmatoool.
Link: https://lore.kernel.org/r/f745590e5fb7d56f90fdb25f64ee3983ba17e1e4.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Convert QP object to follow IB/core general allocation scheme. That
change allows us to make sure that restrack properly kref the memory.
Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com
Reviewed-by: Gal Pressman <galpress@amazon.com> #efa
Tested-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rdmavt QP has fields that are both needed for the control and data
path. Such mixed declaration caused to the very specific allocation flow
with kzalloc_node and SGE list embedded into the struct rvt_qp.
This patch separates QP creation to two: regular memory allocation for the
control path and specific code for the SGE list, while the access to the
later is performed through derefenced pointer.
Such pointer and its context are expected to be in the cache, so
performance difference is expected to be negligible, if any exists.
Link: https://lore.kernel.org/r/f66c1e20ccefba0db3c69c58ca9c897f062b4d1c.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Starting from commit 2b1f747071 ("RDMA/core: Allow drivers to disable
restrack DB") the restrack is able to handle non-standard QP types either.
That change allows us to rewrite custom QP calls to their IB/core
counterparts, so we will use general QP creation flow even for the driver
QP types.
Link: https://lore.kernel.org/r/51682ab82298748941f38bd23ee3bf77ef1cab7b.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The dev->devr.mutex was intended to protect GSI QP pointer change in the
struct mlx5_ib_port_resources when it is accessed from the
pkey_change_work. However that pointer isn't changed during the runtime
and once IB/core adds MAD, it stays stable.
Link: https://lore.kernel.org/r/6e338c561033df20d92e1371fc6a7a0d93aad945.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the driver release flow, we are ensuring that notifier is disabled and
no new works can be added to pkey_change_handler. It means that we can
cancel that handler before destroying resources to make sure that our
unwind routine is symmetrical to the allocation one.
Link: https://lore.kernel.org/r/f2b1ea1bad952e4e7a48a6f731de9e0344986b29.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
QP attributes that were supplied by IB/core already have all parameters
set when they are passed to the driver. The drivers are not supposed to
change anything in struct ib_qp_init_attr.
Fixes: 66d86e529d ("RDMA/hns: Add UD support for HIP09")
Link: https://lore.kernel.org/r/5987138875e8ade9aa339d4db6e1bd9694ed4591.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The call to internal QP creation function skips QP creation checks and
misses the addition of such device QPs to the restrack DB.
As a preparation to general allocation scheme, convert hns to use proper
API.
Link: https://lore.kernel.org/r/7b236c15f7d5abb368958297ac6962d8459cb824.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If hns_roce_cmd_use_events() fails then it means that the poll_sem is not
obtained, but the poll_sem is released in hns_roce_cmd_use_polling(), this
will cause an unlock problem.
This is the static checker warning:
drivers/infiniband/hw/hns/hns_roce_main.c:926 hns_roce_init()
error: double unlocked '&hr_dev->cmd.poll_sem' (orig line 879)
Event mode and polling mode are mutually exclusive and resources are
separated, so there is no need to process polling mode resources in event
mode.
The initial mode of cmd is polling mode, so even if cmd fails to switch to
event mode, it is not necessary to switch to polling mode.
Fixes: a389d016c0 ("RDMA/hns: Enable all CMDQ context")
Fixes: 3d50503b3b ("RDMA/hns: Optimize cmd init and mode selection for hip08")
Link: https://lore.kernel.org/r/1627887374-20019-1-git-send-email-liangwenpeng@huawei.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An earlier patch removed setting of tot_len in IPv4 headers because it was
also set in ip_local_out. However, this change resulted in an incorrect
ICRC being computed because the tot_len field is not masked out. This
patch restores that line. This fixes the bug reported by Zhu Yanjun. This
bug affects anyone using rxe which is currently broken.
Fixes: 230bb836ee ("RDMA/rxe: Fix redundant call to ip_send_check")
Link: https://lore.kernel.org/r/20210729220039.18549-3-rpearsonhpe@gmail.com
Reported-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-and-tested-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The memcpy() that copies a WQE from a SRQ the QP uses an incorrect size.
The size should have been the size of the rxe_send_wqe struct not the size
of a pointer to it. The result is that IO operations using a SRQ on the
responder side will fail.
Fixes: ec0fa2445c ("RDMA/rxe: Fix over copying in get_srq_wqe")
Link: https://lore.kernel.org/r/20210729220039.18549-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The net/sunrpc/xprtrdma module creates its QP using rdma_create_qp() and
immediately post receives, implicitly assuming the QP is in the INIT state
and thus valid for ib_post_recv().
The patch noted in Fixes: removed the RESET->INIT modifiy from
rdma_create_qp(), breaking NFS rdma for verbs providers that fail the
ib_post_recv() for a bad state.
This situation was proven using kprobes in rvt_post_recv() and
rvt_modify_qp(). The traces showed that the rvt_post_recv() failed before
ANY modify QP and that the current state was RESET.
Fix by reverting the patch below.
Fixes: dc70f7c3ed ("RDMA/cma: Remove unnecessary INIT->INIT transition")
Link: https://lore.kernel.org/r/1627583182-81330-1-git-send-email-mike.marciniszyn@cornelisnetworks.com
Cc: Haakon Bugge <haakon.bugge@oracle.com>
Cc: Chuck Lever III <chuck.lever@oracle.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixing a typo that causes a cache entry to shrink immediately after adding
to it new MRs if the entry size exceeds the high limit. In doing so, the
cache misses its purpose to prevent the creation of new mkeys on the
runtime by using the cached ones.
Fixes: b9358bdbc7 ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/fcb546986be346684a016f5ca23a0567399145fa.1627370131.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use -EINVAL return type to identify whether error is returned because of
"Out of MR resources" or any other error types.
Link: https://lore.kernel.org/r/20210729151732.30995-2-pkushwaha@marvell.com
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The core netlink code alread guarentees that no netlink callback can be
running outside the rdma_nl_register/unregister() region and this
registration happens during module init/exit. Thus it is already prevented
that iwpm_valid_client() can ever fail. Remove it.
Link: https://lore.kernel.org/r/a9f05a78f9996bf6ea47099b5e02671bf742f5ab.1627048781.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The failure during iw_cm module initialization partially left the system
with unreleased memory and other resources. Rewrite the module init/exit
routines in such way that netlink commands will be opened only after
successful initialization.
Fixes: b493d91d33 ("iwcm: common code for port mapper")
Link: https://lore.kernel.org/r/b01239f99cb1a3e6d2b0694c242d89e6410bcd93.1627048781.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Link: https://lore.kernel.org/r/1626674454-56075-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Tested-by: Josh Fisher <josh.fisher@cornelisnetworks.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is possible for the primary IPoIB network device associated with any
RDMA device to fail to join certain multicast groups preventing IPv6
neighbor discovery and possibly other network ULPs from working
correctly. The IPv4 broadcast group is not affected as the IPoIB network
device handles joining that multicast group directly.
This is because the primary IPoIB network device uses the pkey at ndex 0
in the associated RDMA device's pkey table. Anytime the pkey value of
index 0 changes, the primary IPoIB network device automatically modifies
it's broadcast address (i.e. /sys/class/net/[ib0]/broadcast), since the
broadcast address includes the pkey value, and then bounces carrier. This
includes initial pkey assignment, such as when the pkey at index 0
transitions from the opa default of invalid (0x0000) to some value such as
the OPA default pkey for Virtual Fabric 0: 0x8001 or when the fabric
manager is restarted with a configuration change causing the pkey at index
0 to change. Many network ULPs are not sensitive to the carrier bounce and
are not expecting the broadcast address to change including the linux IPv6
stack. This problem does not affect IPoIB child network devices as their
pkey value is constant for all time.
To mitigate this issue, change the default pkey in at index 0 to 0x8001 to
cover the predominant case and avoid issues as ipoib comes up and the FM
sweeps.
At some point, ipoib multicast support should automatically fix
non-broadcast addresses as it does with the primary broadcast address.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210715160445.142451.47651.stgit@awfm-01.cornelisnetworks.com
Suggested-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no counter for dmawait in AIP, which hampers debugging
performance issues.
Add the counter increment when the txq is queued.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210715160440.142451.8278.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
is_apu_thread_cq() used to detect CQs which are attached to APU
threads. This was extended to support other elements as well,
so the function was renamed to is_apu_cq().
c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't
reflected when the APU support was first introduced.
Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Use scsi_get_sector() instead of scsi_get_lba() since the name of the
latter is confusing. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210513223757.3938-3-bvanassche@acm.org
Link: https://lore.kernel.org/r/20210609033929.3815-12-martin.petersen@oracle.com
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-12-martin.petersen@oracle.com>
Leon Romanovsky says:
====================
Add ConnectX DCS offload support
This patchset from Lior adds support of DCI stream channel (DCS) support.
DCS is an offload to SW load balancing of DC initiator work requests.
A single DC QP initiator (DCI) can be connected to only one target at the
time and can't start new connection until the previous work request is
completed.
This limitation causes to delays when the initiator process needs to
transfer data to multiple targets at the same time.
====================
* branch 'mlx5_dcs':
RDMA/mlx5: Add DCS offload support
RDMA/mlx5: Separate DCI QP creation logic
net/mlx5: Add DCS caps & fields support
DCS is an offload to SW load balancing of DC initiator work requests.
A single DCI can be connected to only one target at the time and can't
start new connection until the previous work request is completed. This
limitation will cause to delay when the initiator process needs to
transfer data to multiple targets at the same time. The SW solution is to
use a process that handling and spreading the work request on many DCIs
according to destinations.
This feature is an offload to this process and coming to reduce the load
from the CPU and improve the performance.
Link: https://lore.kernel.org/r/491c2c2afdb5b07de7f03eab3f93cf0704549dbc.1624258894.git.leonro@nvidia.com
Reviewed-by: Meir Lichtinger <meirl@nvidia.com>
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch isolates DCI QP creation logic to separate function, so this
change will reduce complexity when adding new features to DCI QP without
interfering with other QP types.
The code was copied from create_user_qp() while taking only DCI relevant bits.
Link: https://lore.kernel.org/r/b4530bdd999349c59691224f016ff1efb5dc3b92.1624258894.git.leonro@nvidia.com
Reviewed-by: Meir Lichtinger <meirl@nvidia.com>
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the ICRC is generated as a u32 type and then forced to a __be32
and stored into the ICRC field in the packet. The actual type of the ICRC
is __be32. This patch replaces u32 by __be32 and eliminates the casts.
The computation is exactly the same as the original but the types are more
consistent.
Link: https://lore.kernel.org/r/20210707040040.15434-10-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch collects the code from rxe_register_device() that sets up the
crc32 calculation into a subroutine rxe_icrc_init() in rxe_icrc.c.
Link: https://lore.kernel.org/r/20210707040040.15434-8-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_icrc_hdr() in rxe_icrc.c is no longer shared. This patch makes it
static and changes the parameter list to match the other routines there.
Link: https://lore.kernel.org/r/20210707040040.15434-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Isolate ICRC generation into a single subroutine named rxe_generate_icrc()
in rxe_icrc.c. Remove scattered crc generation code from elsewhere.
Link: https://lore.kernel.org/r/20210707040040.15434-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixup rxe_send() and rxe_loopback() in rxe_net.c to have the same calling
sequence. This patch makes them static and have the same parameter list
and return value.
Link: https://lore.kernel.org/r/20210707040040.15434-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_xmit_packet() was an overlong inline subroutine. This patch moves it
into rxe_net.c as an ordinary subroutine.
Link: https://lore.kernel.org/r/20210707040040.15434-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the code in rxe_recv() that checks the ICRC on incoming packets to a
subroutine rxe_check_icrc() and move that to rxe_icrc.c.
Link: https://lore.kernel.org/r/20210707040040.15434-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_query_port() calls device->ops.query_port() to get the port
attributes. The method of querying is device driver specific. The same
function calls device->ops.query_gid() to get the GID and extract the
subnet_prefix (gid_prefix).
The GID and subnet_prefix are stored in a cache. But they do not get
read from the cache if the device is an Infiniband device. The
following change takes advantage of the cached subnet_prefix.
Testing with RDBMS has shown a significant improvement in performance
with this change.
Link: https://lore.kernel.org/r/20210712122625.1147-4-anand.a.khoje@oracle.com
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The lock cache_lock of struct ib_device is initialized in function
ib_cache_setup_one(). This is much later than the device initialization in
_ib_alloc_device().
This change shifts initialization of cache_lock in _ib_alloc_device().
Link: https://lore.kernel.org/r/20210712122625.1147-3-anand.a.khoje@oracle.com
Suggested-by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, cache for subnet_prefix was getting updated by reading port
attributes via ib_query_port. ib_query_port() calls ops.query_gid() to get
subnet_prefix and returns it via port_attr.
In ib_cache_update(), config_non_roce_gid_cache() obtains GIDs by calling
ops.query_gid(). We utilize this to store subnet_prefix in cache.
Link: https://lore.kernel.org/r/20210712122625.1147-2-anand.a.khoje@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Aru Kolappan <aru.kolappan@oracle.com>
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hardware stats API distinguishes between device and port statistics,
split the EFA stats accordingly instead of always dumping everything.
Link: https://lore.kernel.org/r/20210712105923.17389-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the returned value of the function irdma_setup_virt_qp is always 0,
remove the returned value check and change the returned type to void.
Link: https://lore.kernel.org/r/20210714031130.1511109-4-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the function irdma_set_hw_rsrc always returns zero, change the
returned type to void and remove all the related source code.
Link: https://lore.kernel.org/r/20210714031130.1511109-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix a coverity warning about NULL pointer dereference:
Dereferencing "vsi", which is known to be "NULL".
Link: https://lore.kernel.org/r/20210708213521.438-1-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505164 ("Null pointer dereferences")
Fixes: 8498a30e1b ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_mr_init_user() at the third error the driver fails to free the
memory at mr->map. This patch adds code to do that. This error only
occurs if page_address() fails to return a non zero address which should
never happen for 64 bit architectures.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210705164153.17652-1-rpearsonhpe@gmail.com
Reported by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]
The use of kmap() in siw_tx_hdt() is all thread local therefore
kmap_local_page() is a sufficient replacement and will work with pgmap
protected pages when those are implemented.
siw_tx_hdt() tracks pages used in a page_array. It uses that array to
unmap pages which were mapped on function exit. Not all entries in the
array are mapped and this is tracked in kmap_mask.
kunmap_local() takes a mapped address rather than a page. Alter
siw_unmap_pages() to take the iov array to reuse the iov_base address of
each mapping. Use PAGE_MASK to get the proper address for kunmap_local().
kmap_local_page() mappings are tracked in a stack and must be unmapped in
the opposite order they were mapped in. Because segments are mapped into
the page array in increasing index order, modify siw_unmap_pages() to
unmap pages in decreasing order.
Use kmap_local_page() instead of kmap() to map pages in the page_array.
[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/
Link: https://lore.kernel.org/r/20210624174814.2822896-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]
These uses of kmap() in the SIW driver are thread local. Therefore
kmap_local_page() is sufficient to use and will work with pgmap protected
pages when those are implemnted.
There is one more use of kmap() in this driver which is split into its own
patch because kmap_local_page() has strict ordering rules and the use of
the kmap_mask over multiple segments must be handled carefully.
Therefore, that conversion is handled in a stand alone patch.
Use kmap_local_page() instead of kmap() in the 'easy' cases.
[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/
Link: https://lore.kernel.org/r/20210622061422.2633501-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to account HB for sq_wr_avail properly, move sq_wr_avail from
rtrs_srv_con to rtrs_con.
Although rtrs-clt do not care sq_wr_avail, but still init it to
max_send_wr.
Fixes: b38041d50a ("RDMA/rtrs: Do not signal for heatbeat")
Link: https://lore.kernel.org/r/20210712060750.16494-7-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
flags is not used, so remove it from rtrs_post_rdma_write_imm_empty.
Link: https://lore.kernel.org/r/20210712060750.16494-6-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It's only used in rtrs.c, so no need to export.
Link: https://lore.kernel.org/r/20210712060750.16494-5-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On idle session, because we do not do signal for heartbeat, it will
overflow the send queue after sometime.
To avoid that, we need to enable the signal for heartbeat. To do that, add
a new member signal_interval in rtrs_path, which will set min of
queue_depth and SERVICE_CON_QUEUE_DEPTH, and track it for both heartbeat
and IO, so the sq queue full accounting is correct.
Fixes: b38041d50a ("RDMA/rtrs: Do not signal for heatbeat")
Link: https://lore.kernel.org/r/20210712060750.16494-4-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We need to track also the wr used for heatbeat. This is a preparation for
that, will be used in later patch.
The io_cnt in rtrs_clt is removed, use wr_cnt instead.
Link: https://lore.kernel.org/r/20210712060750.16494-3-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It could help debugging in case of error happens.
Link: https://lore.kernel.org/r/20210712060750.16494-2-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the function irdma_sc_parse_fpm_commit_buf always returns 0, remove
the returned value check and change the returned type to void.
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Link: https://lore.kernel.org/r/20210708064752.797520-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Majd Dibbiny <majd@nvidia.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following unused variable warning:
drivers/infiniband/hw/irdma/uk.c:934:6: warning: variable 'total_size' set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20210707211455.2076-1-tatyana.e.nikolova@intel.com
Link: https://lkml.org/lkml/2021/7/1/726
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Statistical counters are not incrementing in some adapter versions with
newer FW. This is due to the stats context length mismatch between FW and
driver. Since the L2 driver updates the length correctly, use the stats
length from L2 driver while allocating the DMA'able memory and creating
the stats context.
Fixes: 9d6b648c31 ("bnxt_en: Update firmware interface spec to 1.10.1.65.")
Link: https://lore.kernel.org/r/1626010296-6076-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts, softirqs
and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail what
sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event.
This has been hardcoded as "1" since 2015, no tooling should be looking
at it now. If one exists, we can revert this commit, fix that tool and
try to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes trace
events to write to console. When user space starts, this can easily live
lock the system. Having a boot option to stop just after boot up is
useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that match
the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path from
user space that can do this. All other paths are considered a bug.
- Small clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYN8YPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhxLAP9Mo5hHv7Hg6W7Ddv77rThm+qclsMR/
yW0P+eJpMm4+xAD8Cq03oE1DimPK+9WZBKU5rSqAkqG6CjgDRw6NlIszzQQ=
=WEPR
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers. The major core change is a rework
to drop the status byte handling macros and the old bit shifted
definitions and the rest of the updates are minor fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYN7I6iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpRAQCkngYZ
35yQrqOxgOk2pfrysE95tHrV1MfJm2U49NFTwAEAuZutEvBUTfBF+sbcJ06r6q7i
H0hkJN/Io7enFs5v3WA=
=zwIa
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
This PR contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that can do
ROCE. Otherwise this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide refcount_t
conversion
- Several series for the hns driver, more HIP09 HW capabilities, migration
to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use DEVICE_ATTR_*,
make the ib_port sysfs first-class, and overall use sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support
-----BEGIN PGP SIGNATURE-----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=wyqt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that
can do ROCE.
Other than that, this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide
refcount_t conversion
- Several series for the hns driver, more HIP09 HW capabilities,
migration to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use
DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
RDMA/core: Always release restrack object
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
RDMA/rxe: Missing unlock on error in get_srq_wqe()
RDMA/cma: Fix rdma_resolve_route() memory leak
RDMA/core/sa_query: Remove unused argument
RDMA/cma: Fix incorrect Packet Lifetime calculation
RDMA/cma: Protect RMW with qp_mutex
RDMA/cma: Remove unnecessary INIT->INIT transition
RDMA/hns: Add window selection field of congestion control
RDMA/hfi1: Remove use of kmap()
RDMA/irdma: Remove use of kmap()
RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
IB/isert: Align target max I/O size to initiator size
RDMA/hns: Fix incorrect vlan enable bit in QPC
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/irdma: Use the queried port attributes
RDMA/rxe: Fix redundant skb_put_zero
RDMA/rxe: Fix extra copy in prepare_ack_packet
...
The __assign_str macro has an unusual ending semicolon but the vast
majority of uses of the macro already have semicolon termination.
$ git grep -P '\b__assign_str\b' | wc -l
551
$ git grep -P '\b__assign_str\b.*;' | wc -l
480
Add semicolons to the __assign_str() uses without semicolon termination
and all the other uses without semicolon termination via additional defines
that are equivalent to __assign_str() with the eventual goal of removing
the semicolon from the __assign_str() macro definition.
Link: https://lore.kernel.org/lkml/1e068d21106bb6db05b735b4916bb420e6c9842a.camel@perches.com/
Link: https://lkml.kernel.org/r/48a056adabd8f70444475352f617914cef504a45.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Change location of rdma_restrack_del() to fix the bug where
task_struct was acquired but not released, causing to resource leak.
ucma_create_id() {
ucma_alloc_ctx();
rdma_create_user_id() {
rdma_restrack_new();
rdma_restrack_set_name() {
rdma_restrack_attach_task.part.0(); <--- task_struct was gotten
}
}
ucma_destroy_private_ctx() {
ucma_put_ctx();
rdma_destroy_id() {
_destroy_id() <--- id_priv was freed
}
}
}
Fixes: 889d916b6f ("RDMA/core: Don't access cm_id after its destruction")
Link: https://lore.kernel.org/r/073ec27acb943ca8b6961663c47c5abe78a5c8cc.1624948948.git.leonro@nvidia.com
Reported-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Coverity reports a signed 32-bit overflow on "1 << pprm->pble_shift" when
used expression to compute bits_needed that expects 64bit, unsigned.
Fix this by using the 1ULL in the left shift operator and convert mem_size
to u64.
Link: https://lore.kernel.org/r/20210625162329.1654-3-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505157 ("Integer handling issues")
Fixes: 915cc7ac0f ("RDMA/irdma: Add miscellaneous utility definitions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The contents of user-space req object is used in array indexing in
irdma_handle_q_mem without checking for valid values.
Guard against bad input on each of these req object pages by limiting them
to number of pages that make up the region.
Link: https://lore.kernel.org/r/20210625162329.1654-2-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505160 ("TAINTED_SCALAR")
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This error path needs to unlock before returning.
Fixes: ec0fa2445c ("RDMA/rxe: Fix over copying in get_srq_wqe")
Link: https://lore.kernel.org/r/YNXUCmnPsSkPyhkm@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Majd Dibbiny <majd@nvidia.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix a memory leak when "mda_resolve_route() is called more than once on
the same "rdma_cm_id".
This is possible if cma_query_handler() triggers the
RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and
allows rdma_resolve_route() to be called again.
Link: https://lore.kernel.org/r/f6662b7b-bdb7-2706-1e12-47c61d3474b6@oracle.com
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An approximation for the PacketLifeTime is half the local ACK timeout.
The encoding for both timers are logarithmic.
If the local ACK timeout is set, but zero, it means the timer is
disabled. In this case, we choose the CMA_IBOE_PACKET_LIFETIME value,
since 50% of infinite makes no sense.
Before this commit, the PacketLifeTime became 255 if local ACK
timeout was zero (not running).
Fixed by explicitly testing for timeout being zero.
Fixes: e1ee1e62be ("RDMA/cma: Use ACK timeout for RoCE packetLifeTime")
Link: https://lore.kernel.org/r/1624371207-26710-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The struct rdma_id_private contains three bit-fields, tos_set,
timeout_set, and min_rnr_timer_set. These are set by accessor functions
without any synchronization. If two or all accessor functions are invoked
in close proximity in time, there will be Read-Modify-Write from several
contexts to the same variable, and the result will be intermittent.
Fixed by protecting the bit-fields by the qp_mutex in the accessor
functions.
The consumer of timeout_set and min_rnr_timer_set is in
rdma_init_qp_attr(), which is called with qp_mutex held for connected
QPs. Explicit locking is added for the consumers of tos and tos_set.
This commit depends on ("RDMA/cma: Remove unnecessary INIT->INIT
transition"), since the call to rdma_init_qp_attr() from
cma_init_conn_qp() does not hold the qp_mutex.
Fixes: 2c1619edef ("IB/cma: Define option to set ack timeout and pack tos_set")
Fixes: 3aeffc46af ("IB/cma: Introduce rdma_set_min_rnr_timer()")
Link: https://lore.kernel.org/r/1624369197-24578-3-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rdma_create_qp(), a connected QP will be transitioned to the INIT
state.
Afterwards, the QP will be transitioned to the RTR state by the
cma_modify_qp_rtr() function. But this function starts by performing an
ib_modify_qp() to the INIT state again, before another ib_modify_qp() is
performed to transition the QP to the RTR state.
Hence, there is no need to transition the QP to the INIT state in
rdma_create_qp().
Link: https://lore.kernel.org/r/1624369197-24578-2-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The window selection field is necessary for congestion control of HIP09,
it is got from firmware and then filled into QPC. Some algorithms need it
to decide whether to limit the number of windows.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1624364163-44185-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmap() is being deprecated and will break uses of device dax after PKS
protection is introduced.[1]
The kmap() used in the irdma CM driver is thread local. Therefore
kmap_local_page() is sufficient to use and may provide performance
benefits as well. kmap_local_page() will work with device dax and pgmap
protected pages.
Use kmap_local_page() instead of kmap().
[1] https://lore.kernel.org/lkml/20201009195033.3208459-59-ira.weiny@intel.com/
Link: https://lore.kernel.org/r/20210622165622.2638628-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bit field rsvd1 in resp is not being initialized and garbage data is
being copied from the stack back to userspace via the ib_copy_to_udata
call. Fix this by setting the entire struct resp to zero; this will ensure
that further new bit fields in the future will be zero'd too.
Link: https://lore.kernel.org/r/20210623182437.163801-1-colin.king@canonical.com
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 879740517d ("RDMA/bnxt_re: Update ABI to pass wqe-mode to user space")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
[jgg: remove extra zeroing]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the Linux iser initiator default max I/O size set to 512KB and since
there is no handshake procedure for this size in iser protocol, set the
default max IO size of the target to 512KB as well.
For changing the default values, there is a module parameter for both
drivers.
Link: https://lore.kernel.org/r/20210524085215.29005-1-mgurtovoy@nvidia.com
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Backmerge tag 'v5.13-rc7' into drm-next
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.
Instead of hard code the gid_table_len value, use the value from the
ib_query_port() attributes.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210620201503.67055-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_init_packet() in rxe_net.c calls skb_put_zero() to reserve space for
the payload and zero it out. All these bytes are then re-written with RoCE
headers and payload. Remove this useless extra copy.
Fixes: ecb238f6a7 ("IB/cxgb4: use skb_put_zero()/__skb_put_zero")
Link: https://lore.kernel.org/r/20210618045742.204195-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently prepare_ack_packet writes almost all the fields of the BTH in
the ack packet twice. Replace code with the subroutine init_bth().
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210618045742.204195-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently get_srq_wqe() in rxe_resp.c copies the maximum possible number
of bytes from the wqe into the QPs copy of the SRQ wqe. This is usually
extra work and risks reading past the end of the SRQ circular buffer if
the SRQ is configured with less than the maximum possible number of SGEs.
Check the number of SGEs is not too large.
Compute the actual number of bytes in the WR and copy only those.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210618045742.204195-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
build_rdma_network_hdr() in rxe_resp.c does more copying than is
needed. Remove this subroutine and eliminate the extra copies for IPV6 and
reduce the extra copying for IPV4.
Fixes: e404f945a6 ("IB/rxe: improved debug prints & code cleanup")
Link: https://lore.kernel.org/r/20210618045742.204195-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For IPV4 packets sent on the wire the rxe driver calls ip_local_out()
which immediately calls __ip_local_out() which sets iph->tot_len and calls
ip_send_check(). This code is duplicated in prepare4(). On the loopback
path the IP header checksum and tot_len fields are not used so they do not
need to be set.
Remove this redundant code.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210618045742.204195-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In send_atomic_ack() in rxe_resp.c there is code copying ack_pkt into the
skb->cb[]. This doesn't do anything useful because the cb[] is not used in
the transmit path by the rxe driver.
Remove this code.
Fixes: 4c93496f18 ("IB/rxe: do not copy extra stack memory to skb")
Link: https://lore.kernel.org/r/20210618045742.204195-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iwmr->page_size stores the return from ib_umem_find_best_pgsz and maybe
zero when used in ib_umem_num_dma_blocks thus causing a divide by zero
error.
Fix this by erroring out of irdma_reg_user when 0 is returned from
ib_umem_find_best_pgsz.
Link: https://lore.kernel.org/r/20210622175232.439-3-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505149 ("Integer handling issues")
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The QP type has been checked in check_send_valid(), if it's not RC, it
will process the UD/GSI branch.
Link: https://lore.kernel.org/r/1624011020-16992-10-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The process of flushing CQE can be encapsultated into a function, which
can reduce duplicate code.
Link: https://lore.kernel.org/r/1624011020-16992-9-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_init_qp_table() will only return 0, because this function does
not need to return a value, so it is modified to void type.
Link: https://lore.kernel.org/r/1624011020-16992-8-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When query_qp is called by userspace, max_send_wr and max_send_sge are set
to 0 by the kernel driver. However, the userspace does not use these two
return values from the kernel driver, but uses its own calculated values.
So there is no need for special treatment.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1624011020-16992-6-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some kernel ULPs need to use the return value of qp_init_attr, so add
member assignments for qp_init_attr.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1624011020-16992-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A random value will be returned if the condition below is not met, so it
needs to be initialized.
Fixes: 9ea9a53ea9 ("RDMA/hns: Add mapped page count checking for MTR")
Link: https://lore.kernel.org/r/1624011020-16992-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a non-inline WR reuses a WQE that was used for inline last time, the
remaining inline flag should be cleared.
Fixes: 62490fd5a8 ("RDMA/hns: Avoid unnecessary memset on WQEs in post_send")
Link: https://lore.kernel.org/r/1624011020-16992-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Aharon Landau says:
====================
In case device supports only real-time timestamp, the kernel will fail to
create QP despite rdma-core requested such timestamp type.
It is because device returns free-running timestamp, and the conversion
from free-running to real-time is performed in the user space.
This series fixes it, by returning real-time timestamp.
====================
* mlx5_realtime_ts:
RDMA/mlx5: Support real-time timestamp directly from the device
RDMA/mlx5: Refactor get_ts_format functions to simplify code
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc7' into rdma.git for-next
Linux 5.13-rc7
Needed for dependencies in following patches. Merge conflict in rxe_cmop.c
resolved by compining both patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, if the user asks for a real-time timestamp, the device will
return a free-running one, and the timestamp will be translated to
real-time in the user-space.
When the device supports only real-time timestamp and not free-running,
the creation of the QP will fail even though the user needs supported the
real-time one. To prevent this, we will return the real-time timestamp
directly from the device.
Link: https://lore.kernel.org/r/c6cfc8e6f038575c5c2de6505830f7e74e4de80d.1623829775.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
QPC, SQC and RQC timestamp formats and capabilities are always equal
because they represent general hardware support. So instead of code
duplication, let's merge them into general enum and logic.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
rxe_mr_init_user() always returns the fixed -EINVAL when ib_umem_get()
fails so it's hard for user to know which actual error happens in
ib_umem_get(). For example, ib_umem_get() will return -EOPNOTSUPP when
trying to pin pages on a DAX file.
Return actual error as mlx4/mlx5 does.
Link: https://lore.kernel.org/r/20210621071456.4259-1-ice_yangxiao@163.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring array fields.
Use the ether_addr_copy() helper instead, as already done for smac.
Link: https://lore.kernel.org/r/20210616203744.1248551-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With fast memory registration on write request, rnbd-clt
can do bigger IO without split. rnbd-clt now can query
rtrs-clt to get the max_segments, instead of using
BMAX_SEGMENTS.
BMAX_SEGMENTS is not longer needed, so remove it.
Link: https://lore.kernel.org/r/20210621055340.11789-6-jinpu.wang@ionos.com
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As we can do fast memory registration on write, we can increase
the max_segments, default to 512K.
Link: https://lore.kernel.org/r/20210621055340.11789-5-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With write path fast memory registration, we need less memory for
each request.
With fast memory registration, we can reduce max_send_sge to save
memory usage.
Also convert the kmalloc_array to kcalloc.
Link: https://lore.kernel.org/r/20210621055340.11789-4-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With fast memory registration in write path, we can reduce
the memory consumption by using less max_send_sge, support IO bigger
than 116 KB (29 segments * 4 KB) without splitting, and it also
make the IO path more symmetric.
To avoid some times MR reg failed, waiting for the invalidation to finish
before the new mr reg. Introduce a refcount, only finish the request
when both local invalidation and io reply are there.
Link: https://lore.kernel.org/r/20210621055340.11789-3-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Dima Stepanov <dmitrii.stepanov@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce tail wr, we can send as the last wr, we want to send the local
invalidate wr after rdma wr in later patch.
While at it, also fix coding style issue.
Link: https://lore.kernel.org/r/20210621055340.11789-2-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Changing ucontext ABI response structure to pass wqe_mode to user library.
A flag in comp_mask has been set to indicate presence of wqe_mode.
Moved wqe-mode ABI to uapi/rdma/bnxt_re-abi.h
Link: https://lore.kernel.org/r/20210616202817.1185276-1-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Removed port validity check from ib_get_cached_subnet_prefix() as this
check is not needed because "port_num" is valid.
Link: https://lore.kernel.org/r/20210616154509.1047-2-anand.a.khoje@oracle.com
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Signed-off-by: Haakon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Compilation with W=1 produces warnings similar to the below.
drivers/infiniband/ulp/ipoib/ipoib_main.c:320: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
All such occurrences were found with the following one line
git grep -A 1 "\/\*\*" drivers/infiniband/
Link: https://lore.kernel.org/r/e57d5f4ddd08b7a19934635b44d6d632841b9ba7.1623823612.git.leonro@nvidia.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com> #rtrs
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch xrcd index allocation and release from hns own bitmap interface
to IDA interface.
Link: https://lore.kernel.org/r/1623325814-55737-7-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch pd index allocation and release from hns own bitmap interface
to IDA interface.
Link: https://lore.kernel.org/r/1623325814-55737-6-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch mtpt index allocation and release from hns own bitmap interface
to IDA interface.
Link: https://lore.kernel.org/r/1623325814-55737-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Round-robin (RR) is no longer used in the allocation of the bitmap table,
and all the function input parameters that use this mechanism are
BITMAP_NO_RR. The code that defines and uses the RR needs to be deleted.
Link: https://lore.kernel.org/r/1623325814-55737-4-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_bitmap_free_range() is only called inside hns_roce_bitmap_free(),
and the input parameter "cnt" is set to a constant 1. In addition, the
driver does not use alloc_range scenarios, so free_range does not need to
exist.
Link: https://lore.kernel.org/r/1623325814-55737-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fill all QPC fileds with hr_reg_*() instead of roce_set_*(). SQPN is used
for HIP08 ES only, it should be removed.
Link: https://lore.kernel.org/r/1624262443-24528-6-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid to do bitwise operations on a boolean value, add a new
register interface to avoid sparse comlaint about "dubious: x & !y" when
calling hr_reg_write(ctx, field, !!val).
Fixes: dc50477440 ("RDMA/hns: Use new interface to set MPT related fields")
Fixes: 495c24808c ("RDMA/hns: Add XRC subtype in QPC and XRC type in SRQC")
Link: https://lore.kernel.org/r/1624262443-24528-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GCC may reports an running time assert error when a value calculated from
ib_mtu_enum_to_int() is using as 'val' in FIELD_PREDP:
include/linux/compiler_types.h:328:38: error: call to
'__compiletime_assert_1524' declared with attribute error: FIELD_PREP:
value too large for the field
So a check is added about whether integer mtu from ib_mtu_enum_to_int() is
negative to avoid this warning.
Link: https://lore.kernel.org/r/1624262443-24528-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to use "!!" before "eq->eqe_size ==
HNS_ROCE_V3_EQE_SIZE", or sparse will complain about "dubious: x & !y".
Fixes: 782832f254 ("RDMA/hns: Simplify the function config_eqc()")
Link: https://lore.kernel.org/r/1624262443-24528-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Relaxed Ordering is a capability that can only benefit users that support
it. All kernel ULPs should support Relaxed Ordering, as they are designed
to read data only after observing the CQE and use the DMA API correctly.
Hence, implicitly enable Relaxed Ordering by default for MR transfers in
kernel ULPs.
Link: https://lore.kernel.org/r/b7e820aab7402b8efa63605f4ea465831b3b1e5e.1623236426.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both of HIP08 and HIP09 require the extended doorbell information to be
cleared before being used.
Fixes: 6b63597d35 ("RDMA/hns: Add TSQ link table support")
Link: https://lore.kernel.org/r/1623392089-35639-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently we only check device max_qp_wr limit for IO connection, but not
for service connection. We should check for both.
So save the max_qp_wr device limit in wr_limit, and use it for both IO
connections and service connections.
While at it, also remove an outdated comments.
Link: https://lore.kernel.org/r/20210614090337.29557-6-jinpu.wang@ionos.com
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Those variables are passed to create_cq, create_qp, rtrs_iu_alloc and
rtrs_iu_free, so these *_size means the num of unit. And cq_size also
means number of cq element.
Also move the setting of cq_num to common path.
Link: https://lore.kernel.org/r/20210614090337.29557-5-jinpu.wang@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When using rdma_rxe, post_one_recv() returns ENOMEM error due to the full
recv queue. This patch increase the number of WR for receive queue to
support all devices.
Link: https://lore.kernel.org/r/20210614090337.29557-4-jinpu.wang@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We use device limit max_send_sge, which is suboptimal for memory usage.
We don't need that much for User Con, 1 is enough. And for IO con,
sess->max_segments + 1 is enough
Link: https://lore.kernel.org/r/20210614090337.29557-3-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently rtrs when create_qp use a coarse numbers (bigger in general),
which leads to hardware create more resources which only waste memory with
no benefits.
For max_send_wr, we don't really need alway max_qp_wr size when creating
qp, reduce it to cq_size.
For max_recv_wr, cq_size is enough.
With the patch when sess_queue_depth=128, per session (2 paths) memory
consumption reduced from 188 MB to 65MB
When always_invalidate is enabled, we need send more wr, so treat it
special.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210614090337.29557-2-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the port_groups data is being destroyed and managed by the core
code this restriction is no longer needed. All the ib_port_attrs are
compatible with the core's sysfs lifecycle.
When the main device is destroyed and moved to another namespace the
driver's port sysfs can be created/destroyed as well due to it now being a
simple attribute list.
Link: https://lore.kernel.org/r/afd8b676eace2821692d44489ff71856277c48d1.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
init_port was only being used to register sysfs attributes against the
port kobject. Now that all users are creating static attribute_group's we
can simply set the attribute_group list in the ops and the core code can
just handle it directly.
This makes all the sysfs management quite straightforward and prevents any
driver from abusing the naked port kobject in future because no driver
code can access it.
Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hfi1 should not be creating a mess of kobjects to attach to the port
kobject - this is all attributes. The proper API is to create an
attribute_group list and create it against the port's kobject.
Link: https://lore.kernel.org/r/cbe0ccb6175dd22274359b6ad803a37435a70e91.1623427137.git.leonro@nvidia.com
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qib should not be creating a mess of kobjects to attach to the port
kobject - this is all attributes. The proper API is to create an
attribute_group list and create it against the port's kobject.
Link: https://lore.kernel.org/r/911e0031e1ed495b0006e8a6efec7b67a702cd5e.1623427137.git.leonro@nvidia.com
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This code is trying to attach a list of counters grouped into 4 groups to
the ib_port sysfs. Instead of creating a bunch of kobjects simply express
everything naturally as an ib_port_attribute and add a single
attribute_groups list.
Remove all the naked kobject manipulations.
Link: https://lore.kernel.org/r/0d5a7241ee0fe66622de04fcbaafaf6a791d5c7c.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Other things outside the core code are creating attributes against the
port. This patch exposes the basic machinery to do this.
The ib_port_attribute type allows creating groups of attributes attatched
to the port and comes with the usual machinery to do this.
Link: https://lore.kernel.org/r/5c4aeae57f6fa7c59a1d6d1c5506069516ae9bbf.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This call does nothing because the ib_port kobj is nested under a struct
device kobject and the dev_uevent_filter() function of the struct device
blocks uevents for any children kobj's that are not also struct devices.
A uevent for the struct device will be triggered after
ib_setup_port_attrs() returns which causes udev to pick up all the deep
"attributes" which are implemented as kobjects nested under a struct
device and assign them to the udev object for the struct device:
$ udevadm info -a /sys/class/infiniband/ibp0s9
ATTR{ports/1/counters/excessive_buffer_overrun_errors}=="0"
Link: https://lore.kernel.org/r/49231c92c7d4c60686de18f7e20932d0c82160ee.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of calling device_add_groups() add the group to the existing
groups array which is managed through device_add().
This requires setting up the hw_counters before device_add(), so it gets
split up from the already split port sysfs flow.
Move all the memory freeing to the release function.
Link: https://lore.kernel.org/r/666250d937b64f6fdf45da9e2dc0b6e5e4f7abd8.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the same technique as gid_attrs now uses to manage the port
sysfs. Bundle everything into three allocations and use a single
sysfs_create_groups() to build everything in one shot.
All the memory is always freed in the kobj release function, removing most
of the error unwinding.
The gid_attr technique and the hw_counters are very similar, merge the two
together and combine the sysfs_create_group() call for hw_counters with
the single sysfs group setup.
Link: https://lore.kernel.org/r/b688f3340694c59f7b44b1bde40e25559ef43cf3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of having an whole bunch of different allocations to create the
gid_attr kobjects reduce it to three, one for the kobj struct plus the
attributes, and one for the attribute list for each of the two
groups.
Move the freeing of all allocations to the release function.
Reorder the operations so all the allocations happen first then the
kobject & sysfs operations are last.
This removes the majority of the complicated error unwind since the
release function will always undo all the memory allocations. Freeing the
memory is also much simpler since there is a lot less of it.
Consolidate creating the "group of array indexes" pattern into one helper
function. Ensure kobject_del is used.
Link: https://lore.kernel.org/r/f4149d379db7178d37d11d75e3026bf550f818a1.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The gid_attrs directory is a dedicated kobj nested under the port,
construct/destruct it with its own pair of functions for
understandability. This is much more readable than having it weirdly
inlined out of order into the add_port() function.
Link: https://lore.kernel.org/r/1c9434111b6770a7aef0e644a88a16eee7e325b8.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This code creates a 'struct hw_stats_attribute' for each sysfs entry that
contains a naked 'struct attribute' inside.
It then proceeds to attach this same structure to a 'struct device' kobj
and a 'struct ib_port' kobj. However, this violates the typing
requirements. 'struct device' requires the attribute to be a 'struct
device_attribute' and 'struct ib_port' requires the attribute to be
'struct port_attribute'.
This happens to work because the show/store function pointers in all three
structures happen to be at the same offset and happen to be nearly the
same signature. This means when container_of() was used to go between the
wrong two types it still managed to work.
However clang CFI detection notices that the function pointers have a
slightly different signature. As with show/store this was only working
because the device and port struct layouts happened to have the kobj at
the front.
Correct this by have two independent sets of data structures for the port
and device case. The two different attributes correctly include the
port/device_attribute struct and everything from there up is kept
split. The show/store function call chains start with device/port unique
functions that invoke a common show/store function pointer.
Link: https://lore.kernel.org/r/a8b3864b4e722aed3657512af6aa47dc3c5033be.1623427137.git.leonro@nvidia.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is much saner to store a pointer to the kobject structure that contains
the cannonical stats pointer than to copy the stats pointers into a public
structure.
Future patches will require the sysfs pointer for other purposes.
Link: https://lore.kernel.org/r/f90551dfd296cde1cb507bbef27cca9891d19871.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is being used to implement both the port and device global stats,
which is causing some confusion in the drivers. For instance EFA and i40iw
both seem to be misusing the device stats.
Split it into two ops so drivers that don't support one or the other can
leave the op NULL'd, making the calling code a little simpler to
understand.
Link: https://lore.kernel.org/r/1955c154197b2a159adc2dc97266ddc74afe420c.1623427137.git.leonro@nvidia.com
Tested-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement invalidate MW and cleaned up invalidate MR operations.
Added code to perform remote invalidate for send with invalidate. Added
code to perform local invalidation. Deleted some blank lines in rxe_loc.h.
Link: https://lore.kernel.org/r/20210608042552.33275-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support for bind MW work requests from user space. Since rdma/core
does not support bind mw in ib_send_wr there is no way to support bind mw
in kernel space.
Added bind_mw local operation in rxe_req.c. Added bind_mw WR operation in
rxe_opcode.c. Added bind_mw WC in rxe_comp.c. Added additional fields to
rxe_mw in rxe_verbs.h. Added rxe_do_dealloc_mw() subroutine to cleanup an
mw when rxe_dealloc_mw is called. Added code to implement bind_mw
operation in rxe_mw.c
Link: https://lore.kernel.org/r/20210608042552.33275-8-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Simplify rxe_requester() by moving the local operations to a subroutine.
Add an error return for illegal send WR opcode. Moved next_index ahead of
rxe_run_task which fixed a small bug where work completions were delayed
until after the next wqe which was not the intended behavior. Let errors
return their own WC status. Previously all errors were reported as
protection errors which was incorrect. Changed the return of errors from
rxe_do_local_ops() to err: which causes an immediate completion. Without
this an error on a last WR may get lost. Changed fill_packet() to
finish_packet() which is more accurate.
Fixes: 8700e2e7c485 ("The software RoCE driver")
Link: https://lore.kernel.org/r/20210608042552.33275-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Rxe has two mask bits WR_LOCAL_MASK and WR_REG_MASK with WR_REG_MASK used
to indicate any local operation and WR_LOCAL_MASK unused. This patch
replaces both of these with one mask bit WR_LOCAL_OP_MASK which is
clearer.
Link: https://lore.kernel.org/r/20210608042552.33275-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add ib_alloc_mw and ib_dealloc_mw verbs APIs.
Added new file rxe_mw.c focused on MWs. Changed the 8 bit random key
generator. Added a cleanup routine for MWs. Added verbs routines to
ib_device_ops.
Link: https://lore.kernel.org/r/20210608042552.33275-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rxe driver has a rxe_mw struct object but nothing about
memory windows is enabled. This patch turns on memory windows and some
minor cleanup.
Set device attribute in rxe.c so max_mw = MAX_MW. Change parameters in
rxe_param.h so that MAX_MW is the same as MAX_MR. Reduce the number of
MRs and MWs to 4K from 256K. Add device capability bits for 2a and 2b
memory windows. Removed RXE_MR_TYPE_MW from the rxe_mr_type enum.
Link: https://lore.kernel.org/r/20210608042552.33275-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Modify rxe_add_index() and rxe_add_key() to return an error if the index
or key is aleady present in the pool. Currently they print a warning and
silently fail with bad consequences to the caller.
Link: https://lore.kernel.org/r/20210608042552.33275-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rdma_rxe driver attempts to protect atomic responder
resources by taking a reference to the qp which is only freed when the
resource is recycled for a new read or atomic operation. This means that
in normal circumstances there is almost always an extra qp reference once
an atomic operation has been executed which prevents cleaning up the qp
and associated pd and cqs when the qp is destroyed.
This patch removes the call to rxe_add_ref() in send_atomic_ack() and the
call to rxe_drop_ref() in free_rd_atomic_resource(). If the qp is
destroyed while a peer is retrying an atomic op it will cause the
operation to fail which is acceptable.
Link: https://lore.kernel.org/r/20210604230558.4812-1-rpearsonhpe@gmail.com
Reported-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Fixes: 86af617641 ("IB/rxe: remove unnecessary skb_clone")
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All functions of HIP09's ROCEE share on-chip resources for all QPs, the
driver needs configure the resource index and number for each function
during the init stage.
Link: https://lore.kernel.org/r/1622541427-42193-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx5_ib_bind_slave_port() doesn't remove multiport device from the
unaffiliated list, but mlx5_ib_unbind_slave_port() did it. This unbalanced
flow caused to the situation where mlx5_ib_unaffiliated_port_list was
changed during iteration.
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/2726e6603b1e6ecfe76aa5a12a063af72173bcf7.1622477058.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Whenever users provided affinity for an EQ creation request, map the
EQ to a matching IRQ.
Matching IRQ=IRQ with the same affinity and type (completion/control) of
the EQ created.
This mapping is being done in agressive dedicated IRQ allocation scheme,
which described bellow.
First, we check whether there is a matching IRQ that his min threshold
is not exhausted.
- min_eqs_threshold = 3 for control EQ.
- min_eqs_threshold = 1 for completion EQ.
In case no matching IRQ was found, try to request a new IRQ.
In case we can't request a new IRQ, reuse least-used matching IRQ.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The users of EQ are running their code on different CPUs and with
various affinity patterns. Move the cpumask setting close to their
actual usage.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The level1 PBL info address is stored as u64. This requires casting
through a uinptr_t before used as a pointer type.
And this leads to sparse warning such as this when uinptr_t is missing:
drivers/infiniband/hw/irdma/hw.c: In function 'irdma_destroy_virt_aeq':
drivers/infiniband/hw/irdma/hw.c:579:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
579 | dma_addr_t *pg_arr = (dma_addr_t *)aeq->palloc.level1.addr;
This can be fixed using an intermediate uintptr_t, but rather it is better
to fix the structure irdm_pble_info to store the address as u64* and the
VA it is assigned in irdma_chunk as a void*. This greatly reduces the
casting on this address.
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20210609234924.938-1-shiraz.saleem@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It turns out this is only being used to store the LID for SIDR mode to
search the RB tree for request de-duplication. Store the LID value
directly and don't pretend it is a GID.
Link: https://lore.kernel.org/r/2e7c87b6f662c90c642fc1838e363ad3e6ef14a4.1623236345.git.leonro@nvidia.com
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function init_cq_frag_buf() can be called to initialize the current CQ
fragments buffer cq->buf, or the temporary cq->resize_buf that is filled
during CQ resize operation.
However, the offending commit started to use function get_cqe() for
getting the CQEs, the issue with this change is that get_cqe() always
returns CQEs from cq->buf, which leads us to initialize the wrong buffer,
and in case of enlarging the CQ we try to access elements beyond the size
of the current cq->buf and eventually hit a kernel panic.
[exception RIP: init_cq_frag_buf+103]
[ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib]
[ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core]
[ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt]
[ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt]
[ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt]
[ffff9f799ddcbec8] kthread at ffffffffa66c5da1
[ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd
Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that
takes the correct source buffer as a parameter.
Fixes: 388ca8be00 ("IB/mlx5: Implement fragmented completion queue (CQ)")
Link: https://lore.kernel.org/r/90a0e8c924093cfa50a482880ad7e7edb73dc19a.1623309971.git.leonro@nvidia.com
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Validate port value provided by the user and with that remove no longer
needed validation by the driver. The missing check in the mlx5_ib driver
could cause to the below oops.
Call trace:
_create_flow_rule+0x2d4/0xf28 [mlx5_ib]
mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib]
ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs]
ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs]
ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs]
do_vfs_ioctl+0xd0/0xaf0
ksys_ioctl+0x84/0xb4
__arm64_sys_ioctl+0x28/0xc4
el0_svc_common.constprop.3+0xa4/0x254
el0_svc_handler+0x84/0xa0
el0_svc+0x10/0x26c
Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a)
Fixes: 436f2ad05a ("IB/core: Export ib_create/destroy_flow through uverbs")
Link: https://lore.kernel.org/r/faad30dc5219a01727f47db3dc2f029d07c82c00.1623309971.git.leonro@nvidia.com
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Adding new reformat context type (INSERT_HEADER) requires adding two new
parameters to reformat context - reformat_param_0 and reformat_param_1.
As defined by HW spec, these parameters have different meaning for
different reformat context type.
The first parameter (reformat_param_0) is not new to HW spec, but it
wasn't used by any of the supported reformats. The second parameter
(reformat_param_1) is new to the HW spec - it was added to allow
supporting INSERT_HEADER.
For NSERT_HEADER, reformat_param_0 indicates the header used to
reference the location of the inserted header, and reformat_param_1
indicates the offset of the inserted header from the reference point
defined by reformat_param_0.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use list_last_entry and list_first_entry instead of using prev and next
pointers.
Link: https://lore.kernel.org/r/20210608211415.680-1-shiraz.saleem@intel.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow creating FDB steering rules only when in switchdev mode.
The only software model where a userspace application can manipulate
FDB entries is when it manages the eswitch. This is only possible in
switchdev mode where we expose a single RDMA device with representors
for all the vports that are connected to the eswitch.
Fixes: 52438be441 ("RDMA/mlx5: Allow inserting a steering rule to the FDB")
Link: https://lore.kernel.org/r/e928ae7c58d07f104716a2a8d730963d1bd01204.1623052923.git.leonro@nvidia.com
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using list_move() instead of list_del() + list_add().
Link: https://lore.kernel.org/r/20210608031041.2820429-1-libaokun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The refcount_t API will WARN on underflow and overflow of a reference
counter, and avoid use-after-free risks.
Link: https://lore.kernel.org/r/1622194663-2383-12-git-send-email-liweihang@huawei.com
Cc: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The refcount_t API will WARN on underflow and overflow of a reference
counter, and avoid use-after-free risks. Increase refcount_t from 0 to 1 is
regarded as there is a risk about use-after-free. So it should be set to 1
directly during initialization.
Link: https://lore.kernel.org/r/1622194663-2383-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is a typo in the returned error code sign from irdma_modify_qp()
when the attr_mask is not supported - Fix it.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210607221543.254144-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The variable val is being initialized with a value that is never
read, it is being updated later on. The assignment is redundant and
can be removed.
Link: https://lore.kernel.org/r/20210605131347.26293-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
