Local invalidate is also a kind of memory management operation, not only
memory bind operation. Furthermore, as invalidate operations include local
and remote, add prefix to the prompt message to make it clearer.
Link: https://lore.kernel.org/r/1617698772-13871-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A spin lock is taken here so we should use GFP_ATOMIC.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/20210407154900.3486268-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To update xlt (during mlx5_ib_reg_user_mr()), the driver can request up to
1 MB (order-8) memory, depending on the size of the MR. This costly
allocation can sometimes take very long to return (a few seconds). This
causes the calling application to hang for a long time, especially when
the system is fragmented. To avoid these long latency spikes, the calls
the higher order allocations need to fail faster in case they are not
available.
In order to acheive this we need __GFP_NORETRY flag in the gfp_mask before
during fetching the free pages. Allow the algorithm to automatically fall
back to smaller page sizes.
Link: https://lore.kernel.org/r/1617425635-35631-1-git-send-email-praveen.kannoju@oracle.com
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove the unused function sdma_iowait_schedule().
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/1617026791-89997-1-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code currently assumes that the mmu_notifier struct
embedded in mmu_rb_handler only contains two fields.
There are now extra fields:
struct mmu_notifier {
struct hlist_node hlist;
const struct mmu_notifier_ops *ops;
struct mm_struct *mm;
struct rcu_head rcu;
unsigned int users;
};
Given that there in no init for the mmu_notifier, a kzalloc() should
be used to insure that any newly added fields are given a predictable
initial value of zero.
Fixes: 06e0ffa693 ("IB/hfi1: Re-factor MMU notification code")
Link: https://lore.kernel.org/r/1617026056-50483-9-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Adam Goldman <adam.goldman@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add traces that were vital in isolating an issue with pq waitlist in
commit fa8dac3968 ("IB/hfi1: Fix another case where pq is left on
waitlist")
Link: https://lore.kernel.org/r/1617026056-50483-8-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hfi1_ipoib_send() directly calls hfi1_ipoib_send_dma() with no value add.
Fix by renaming hfi1_ipoib_send_dma() to hfi1_ipoib_send().
Link: https://lore.kernel.org/r/1617026056-50483-6-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The call is from an ISR context and napi_schedule_irqoff() can be used.
Change the call to the more efficient type.
Link: https://lore.kernel.org/r/1617026056-50483-5-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The completion ring for tx is using the wrong size to size the ring,
oversizing the ring by two orders of magniture.
Correct the allocation size and use kcalloc_node() to allocate the ring.
Fix mistaken GFP defines in similar allocations.
Link: https://lore.kernel.org/r/1617026056-50483-4-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current rdma_netdev handling in ipoib hooks the tx_timeout handler,
but prints out a totally useless message that prevents effective debugging
especially when multiple transmit queues are being used.
Add a tx_timeout rdma_netdev hook and implement the callback in the hfi1
to print additional information.
The existing non-helpful message is avoided when the driver has presented
a callback.
Link: https://lore.kernel.org/r/1617026056-50483-3-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add traces to allow for debugging issues with AIP tx.
Link: https://lore.kernel.org/r/1617026056-50483-2-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ipv6 bit is wrongly set by the below which causes fatal adapter lookup
engine errors for ipv4 connections while destroying a listener. Fix it to
properly check the local address for ipv6.
Fixes: 3408be145a ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server")
Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The doorbell update interfaces are very similar for different queues, such
as SQ, RQ, SRQ, CQ and EQ. So reorganize these code and also fix some
inappropriate naming.
Link: https://lore.kernel.org/r/1616840738-7866-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 supports both normal and record doorbell mode for RQ and CQ, SQ
record doorbell for userspace is also supported by the software for
flushing CQE process. As now the capability of HIP08 are exposed to the
user and are configurable, the support of normal doorbell should be added
back.
Note that, if switching to normal doorbell, the kernel will report "flush
cqe is unsupported" if modify qp to error status as the flush is based on
record doorbell.
Link: https://lore.kernel.org/r/1616840738-7866-2-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Encapsulate configuring GMV base address and other type of HEM table into
two separate functions to make process of setting HEM clearer.
Link: https://lore.kernel.org/r/1616815294-13434-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'HNS_ROCE_OPC_QUERY_MB_ST' command will response the mailbox complete
status and hardware busy flag, and the complete status is only valid when
the busy flag is 0, so it's better to query these two fields at a time
rather than separately.
Link: https://lore.kernel.org/r/1616815294-13434-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Max io size is limited by both remote buffer size and the max fr pages per
mr.
Link: https://lore.kernel.org/r/20210325153308.1214057-20-gi-oh.kim@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Before receiving the session name, the error message cannot include any
information about which connection generates the error.
This patch stores the addresses of source and target in the sessname field
to show which generates the error. That field will be over-written
when receiving the session name from client.
Link: https://lore.kernel.org/r/20210325153308.1214057-17-gi-oh.kim@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is common code converting addresses of source machine and
destination machine to a string. We already have a struct rtrs_addr to
store two addresses. This patch introduces a new function that converts
two addresses into one string with struct rtrs_addr.
Link: https://lore.kernel.org/r/20210325153308.1214057-14-gi-oh.kim@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Let these cases share the same path since all of them need to close
session.
Link: https://lore.kernel.org/r/20210325153308.1214057-11-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The two members are not used in the code, so remove them.
Link: https://lore.kernel.org/r/20210325153308.1214057-10-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We can remove the label after move put_device to the right place.
Link: https://lore.kernel.org/r/20210325153308.1214057-9-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to dereference 's' from 'sess', since we have "sess =
to_clt_sess(s)" before.
And we can deference 'dev' from 's' earlier.
Link: https://lore.kernel.org/r/20210325153308.1214057-8-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The type of congestion control algorithm includes DCQCN, LDCP, HC3 and
DIP. The driver will select one of them according to the firmware when
querying PF capabilities, and then set the related configuration fields
into QPC.
Link: https://lore.kernel.org/r/1616679236-7795-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new type of command to query mac id of functions from the firmware,
it is used to select the template of congestion algorithm. More info will
be supported in the future.
Link: https://lore.kernel.org/r/1616679236-7795-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Shengming Shu <shushengming1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On RoCE systems, a CM REQ contains a Primary Hop Limit > 1 and Primary
Subnet Local is zero.
In cm_req_handler(), the cm_process_routed_req() function is called. Since
the Primary Subnet Local value is zero in the request, and since this is
RoCE (Primary Local LID is permissive), the following statement will be
executed:
IBA_SET(CM_REQ_PRIMARY_SL, req_msg, wc->sl);
This corrupts SL in req_msg if it was different from zero. In other words,
a request to setup a connection using an SL != zero, will not be honored,
and a connection using SL zero will be created instead.
Fixed by not calling cm_process_routed_req() on RoCE systems, the
cm_process_route_req() is only for IB anyhow.
Fixes: 3971c9f6db ("IB/cm: Add interim support for routed paths")
Link: https://lore.kernel.org/r/1616420132-31005-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather
than explicitly calling spin_lock_init().
Link: https://lore.kernel.org/r/20210331020105.4858-1-tangyizhou@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the original rxe implementation it was intended to use a common object
to represent MRs and MWs but they are different enough to separate these
into two objects.
This allows replacing the mem name with mr for MRs which is more
consistent with the style for the other objects and less likely to be
confusing. This is a long patch that mostly changes mem to mr where it
makes sense and adds a new rxe_mw struct.
Link: https://lore.kernel.org/r/20210325212425.2792-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The strlcpy function doesn't limit the source length, use the preferred
strscpy function instead.
Link: https://lore.kernel.org/r/20210329120131.18793-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The device is got by isert_device_get() with refcount is 1, and is
assigned to isert_conn by
isert_conn->device = device.
When isert_create_qp() failed, device will be freed with
isert_device_put().
Later, the device is used in isert_free_login_buf(isert_conn) by the
isert_conn->device->ib_device statement.
Free the device in the correct order.
Fixes: ae9ea9ed38 ("iser-target: Split some logic in isert_connect_request to routines")
Link: https://lore.kernel.org/r/20210322161325.7491-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Correct the following spelling errors:
1. shold -> should
2. uncontext -> ucontext
Link: https://lore.kernel.org/r/1616147749-49106-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, ODP caps are set during the init stage of mlx5_ib_dev,
regardless of whether the device profile supports ODP or not. There is no
point in setting ODP caps if the device profile doesn't support
ODP. Hence, move setting the ODP caps to the odp_init stage.
Link: https://lore.kernel.org/r/20210318135259.681264-1-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Initial drop action support missed that drop action can be added to egress
flow tables as well. Add the missing support.
This requires making sure that dest_type isn't set to PORT which in turn
exposes a possibility of passing dst while indicating number of dsts as
zero. Explicitly check for number of dsts and pass the appropriate
pointer.
Fixes: f29de9eee7 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20210318135123.680759-1-leon@kernel.org
Reviewed-by: Mark Bloch <markb@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Success is returned in the following flows:
* New mode is the same as the current one.
* Switched to new mode and there are no bound counters yet.
Link: https://lore.kernel.org/r/20210318110502.673676-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the L2 driver detects a device crash or device undergone reset, it
invokes a stop callback to recover from error.
The current RoCE driver doesn't recover the device. So move the device to
error state and dispatch fatal events to all qps Release the MSIx vectors
to avoid a crash when L2 driver disables the MSIx. Also, check for the
device state to avoid posting further commands to the HW.
Link: https://lore.kernel.org/r/1615968942-30970-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of sync
- Longstanding cxgb4 adaptor crash when destroying cm ids
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmBcxe0ACgkQOG33FX4g
mxruFQ/+JMfHtWowI9l32N+SI93zWAQVN6bcO5XiUeziCLEsktU2dh5Lu8ZWWVmB
BX1US24oBuGKs+YNx1ayshlgQj7EgojnGZODGtL4O157IvvgMrm4gFN84EoN3gMA
8QzPVgZrrvyjDc8tSEINAW5crkpmhqdeg6XYM9BTUrVLqy+rXWv6V5E8Gnvtexmq
h/+UgbIxW00SVVxpNyAFeuu1IlbgSYU0DvU4xpha/XKX6Ifyl9SeKmn6y+1UEU4q
AYd/6UuYvK26G8tA3Zteh3lR8cUiLeorIwB6B5WoMDZXhyBz+PhaBS2ypHsrrnyr
IIEDres5/zEm355nT8j0hTMv40ZUlj4UFRf2eWqcdrLD54yb6n8g4X2rmsASoe1A
Z3CrhkV39dPEsB7JXmGB9j6W47PWGYBYUGpYTMRr69K7eB3viDIC+i6fDK7eKS0e
u+fO3K9kU2B/PSJvWVCPKn2GCOw3jRuqwbTFUt0kvo8E90yzV6yqjgyoTKt+PgBn
t0SUyPEGue+KEKgJd/sp62OL8LPulFksx+E7ksvqqbmSTNAjH+bs/FrbUYoN0r3v
kmkxgxLzipu1aYtLwcAtNJpEya3c6s4ERBFeJMk01xUkiiWPG9RLa66Zg2IzDqWW
J55irlJIqBm792vB+vH7+FHU3YjEGh66ycGRqsBWiw2oUxmlxEc=
=vjhp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not much going on, just some small bug fixes:
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of
sync
- Long-standing cxgb4 adaptor crash when destroying cm ids"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
RDMA/hns: Fix bug during CMDQ initialization
RDMA/mlx5: Fix typo in destroy_mkey inbox
Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the ops named get_dev_fw_str to support ib_get_device_fw_str().
Link: https://lore.kernel.org/r/1615882161-53827-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to create the ODP EQ if the user doesn't use ODP MRs.
Hence, create it only when the first ODP MR is created. This EQ will be
destroyed only when the device is unloaded.
This will decrease the number of EQs created per device. for example: If
we creates 1K devices (SF/VF/etc'), than we will decrease the num of EQs
by 1K.
Link: https://lore.kernel.org/r/20210314125418.179716-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It's incorrect to cast the type of pointer to xrcdn from (u32 *) to
(unsigned long *), then pass it into hns_roce_bitmap_alloc(), this will
lead to a memory corruption.
Fixes: 32548870d4 ("RDMA/hns: Add support for XRC on HIP09")
Link: https://lore.kernel.org/r/1616381069-51759-1-git-send-email-liweihang@huawei.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit ee1c60b1bf ("IB/SA: Modify SA to implicitly cache Class Port
info") removed the class_port_info_context struct usage, remove a couple
of leftovers.
Link: https://lore.kernel.org/r/20210314143427.76101-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch fixes bunch of kernel-doc compilation warnings like below:
drivers/infiniband/hw/i40iw/i40iw_cm.c:4372: warning: expecting prototype for i40iw_ifdown_notify(). Prototype was for i40iw_if_notify() instead
Link: https://lore.kernel.org/r/20210314133908.291945-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following smatch error:
drivers/infiniband/hw/mlx5/mr.c:1950 mlx5_ib_dereg_mr() error: uninitialized symbol 'rc'.
Fixes: e6fb246cca ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Link: https://lore.kernel.org/r/20210314082250.10143-1-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When reloading driver, the head/tail pointer of CMDQ may be not at
position 0. Then during initialization of CMDQ, if head is reset first,
the firmware will start to handle CMDQ because the head is not equal to
the tail. The driver can reset tail first since the firmware will be
triggerred only by head. This bug is introduced by changing macros of
head/tail register without changing the order of initialization.
Fixes: 292b3352bd ("RDMA/hns: Adjust fields and variables about CMDQ tail/head")
Link: https://lore.kernel.org/r/1615602611-7963-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that each representor stores a pointer to the managing E-Switch
use that information when creating the send-to-vport rules.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Now that a pointer to the managing E-Switch is stored in the representor
use it.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The umem DMA list calculation was locked at 4k pages due to confusion
around how this API works and is used when larger pages are present.
The conclusion is:
- umem's cannot extend past what is mapped into the process, so creating
a lage page size and referring to a sub-range is not allowed
- umem's must always have a page offset of zero, except for sub PAGE_SIZE
umems
- The feature of umem_offset to create multiple objects inside a umem
is buggy and isn't used anyplace. Thus we can assume all users of the
current API have umem_offset == 0 as well
Provide a new page size calculator that limits the DMA list to the VA
range and enforces umem_offset == 0.
Allow user space to specify the page sizes which it can accept, this
bitmap must be derived from the intended use of the umem, based on
per-usage HW limitations.
Link: https://lore.kernel.org/r/20210304130501.1102577-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change uverbs_get_const/uverbs_get_const_default to work properly with
both signed/unsigned parameters.
Current APIs mix s64 and u64 which leads to incorrect check when u64
value was supplied and its upper bit was set. In that case
uverbs_get_const() / uverbs_get_const_default() lower bound check may
fail unexpectedly, target is unsigned (lower bound is 0) but value
became negative as of the s64 usage.
Split to have two different APIs, no change to callers as the required
API will be called internally according to the target type.
Link: https://lore.kernel.org/r/20210304130501.1102577-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The WARN_ON() issued as part of ib_umem_find_best_pgsz() blocked cases
when only page sizes larger than PAGE_SIZE were set, drop it to enable
those cases.
In addition, there is no need to have a specific check for zero
pgsz_bitmap, the function will do its job and return 0 at the end if
nothing match will be found.
Link: https://lore.kernel.org/r/20210304130501.1102577-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Correct the map between mlx5 rates and corresponding ib rates, as they
don't always have a fixed offset between them.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20210304124517.1100608-4-leon@kernel.org
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_is_roce_enabled returns the devlink RoCE init value, therefore it
should be used only when driver is loaded. Instead we just need to read
the roce_en field.
In addition, rename mlx5_is_roce_enabled to mlx5_is_roce_init_enabled.
Fixes: 7a58779edd ("IB/mlx5: Improve query port for representor port")
Link: https://lore.kernel.org/r/20210304124517.1100608-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that this is only used in a few places in mr.c give it a sensible
name. It has nothing to do with the cache and can be invoked on any
MR. DMA is stopped and the user cannot touch the MR any further once it
completes.
Link: https://lore.kernel.org/r/20210304120745.1090751-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the SRCU stuff has been removed the entire MR destroy logic can
be made a lot simpler. Currently there are many different ways to destroy a
MR and it makes it really hard to do this task correctly. Route all
destruction through mlx5_ib_dereg_mr() and make it work for all
situations.
Since it turns out all the different MR types do basically the same thing
this removes a lot of knowledge of MR internals from ODP and leaves ODP
just exporting an operation to clean up children.
This fixes a few weird corner cases bugs and firmly uses the correct
ordering of the MR destruction:
- Stop parallel access to the mkey via the ODP xarray
- Stop DMA
- Release the umem
- Clean up ODP children
- Free/Recycle the MR
Link: https://lore.kernel.org/r/20210304120745.1090751-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The struct mlx5_ib_mr can be used for three different things, but only one
at a time:
- In the user MR cache
- As a kernel MR
- As a user MR
Overlay the three things into a single union with the following rules:
- If the mr is found on the cache_ent->head list then it is a cache MR
and umem == NULL. The entire union is zero after the MR is removed from
the cache.
- If umem != NULL or type == IB_MR_TYPE_USER then it is a user MR.
- If umem == NULL then it is a kernel MR
This reduces the size of struct mlx5_ib_mr to 552 bytes from 702.
The only place the three flows overlap in the code is during dereg, so add
a few extra checks along there.
Link: https://lore.kernel.org/r/20210304120745.1090751-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All of the ODP code assumes when it calls mlx5_mr_cache_alloc() the ODP
related fields are zero'd. This is true if the MR was just allocated, but
if the MR is recycled through the cache then the values are never zero'd.
This causes a bug in the odp_stats, they don't reset when the MR is
reallocated, also is_odp_implicit is never 0'd.
So we can use memset on a block of the mlx5_ib_mr reorganize the structure
to put all the data that can be zero'd by the cache at the end.
It is organized as an anonymous struct because the next patch will make
this a union.
Delete the unused smr_info. Don't set the kernel only desc_size on the
user path. No longer any need to zero mr->parent before freeing it, the
memset() will get it now.
Fixes: a3de94e3d6 ("IB/mlx5: Introduce ODP diagnostic counters")
Link: https://lore.kernel.org/r/20210304120745.1090751-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 supports XRC transport service, it greatly saves the number of
QPs required to connect all processes in a large cluster.
Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have the driver use shared CQs which provids a ~10%-20% improvement during
test.
Instead of opening a CQ for each QP per connection, a CQ for each QP will
be provided by the RDMA core driver that will be shared between the QPs on
that core reducing interrupt overhead.
Link: https://lore.kernel.org/r/20210222141551.54345-1-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set mkey_index to the correct place when preparing the destroy_mkey inbox,
this will fix the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_check:782:(pid 980716): DEALLOC_PD(0x801)
op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x31b635)
Link: https://lore.kernel.org/r/20210311142024.1282004-1-leon@kernel.org
Fixes: 1368ead04c ("RDMA/mlx5: Use strict get/set operations for obj_id")
Reviewed-by: Ido Kalir <idok@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Binding IPv6 address/port to AF_INET6 domain only is provided via
rdma_set_afonly(), but was not signalled to the provider. Applications
like NFS/RDMA bind the same port to both IPv4 and IPv6 addresses
simultaneously and thus rely on it working correctly.
Link: https://lore.kernel.org/r/20210219143441.1068-1-bmt@zurich.ibm.com
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
1. Don't set the ts_format bit to default when it reserved - device is
running in the old mode (free running).
2. XRC doesn't have a CQ therefore the ts format in the QP
context should be default / free running.
3. Set ts_format to WQ.
Fixes: 2fe8d4b878 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
HIP09 uses new address space to map SQ doorbell registers, the doorbell of
each QP is isolated based on the size of 64KB, which can improve the
performance in concurrency scenarios.
Link: https://lore.kernel.org/r/1614082833-23130-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb
which triggered a warning at 'done:' and could possibly at 'exit:'. The
WARN_ONCE() calls are not actually needed. The call to free_pkt() is
moved to the end to clearly show that all skbs are freed.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error
occurred causing an underflow on the reference counter. This code is
cleaned up to be clearer and easier to read.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
tcm_loop could be used like a normal block device, so we can't use
GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to
target_cmd_init_cdb() and converts the users. For every driver but loop
GFP_KERNEL is kept.
This will also be useful in subsequent patches where loop needs to do
target_submit_prep() from interrupt context to get a ref to the se_device,
and so it will need to use GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
target_submit_cmd_map_sgls() is being removed, so convert srpt to the new
submission API.
srpt uses target_stop_session() to sync session shutdown with LIO core, so
we use target_init_cmd()/target_submit_prep()/target_submit(), because
target_init_cmd() will detect the target_stop_session() call and return an
error.
Link: https://lore.kernel.org/r/20210227170006.5077-6-michael.christie@oracle.com
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following W=1 compilation warning:
drivers/infiniband/core/uverbs_ioctl.c:108: warning: expecting prototype for uverbs_alloc(). Prototype was for _uverbs_alloc() instead
Fixes: 461bb2eee4 ("IB/uverbs: Add a simple allocator to uverbs_attr_bundle")
Link: https://lore.kernel.org/r/20210302074214.1054299-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The W=1 allmodconfig build produces the following warning:
drivers/infiniband/hw/mlx5/odp.c:1086: warning: wrong kernel-doc identifier on line:
* Parse a series of data segments for page fault handling.
Fix it by changing /** to be /* as it is written in kernel-doc
documentation.
Fixes: 5e769e444d ("RDMA/hw/mlx5/odp: Fix formatting and add missing descriptions in 'pagefault_data_segments()'")
Link: https://lore.kernel.org/r/20210302074214.1054299-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set err to -ENOMEM if kzalloc fails instead of 0.
Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://lore.kernel.org/r/20210222122343.19720-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When RDMA_RXE is enabled and CRYPTO is disabled, Kbuild gives the
following warning:
WARNING: unmet direct dependencies detected for CRYPTO_CRC32
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- RDMA_RXE [=y] && (INFINIBAND_USER_ACCESS [=y] || !INFINIBAND_USER_ACCESS [=y]) && INET [=y] && PCI [=y] && INFINIBAND [=y] && INFINIBAND_VIRT_DMA [=y]
This is because RDMA_RXE selects CRYPTO_CRC32, without depending on or
selecting CRYPTO, despite that config option being subordinate to CRYPTO.
Fixes: cee2688e3c ("IB/rxe: Offload CRC calculation when possible")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/21525878.NYvzQUHefP@ubuntu-mate-laptop
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_send_cm_sidr_rep() {
spin_lock_irqsave()
cm_send_sidr_rep_locked() {
...
spin_lock_irq()
....
spin_unlock_irq() <--- this will enable interrupts
}
spin_unlock_irqrestore()
}
spin_unlock_irqrestore() expects interrupts to be disabled but the
internal spin_unlock_irq() will always enable hard interrupts.
Fix this by replacing the internal spin_{lock,unlock}_irq() with
irqsave/restore variants.
It fixes the following kernel trace:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 2 PID: 20001 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20
Call Trace:
_raw_spin_unlock_irqrestore+0x4e/0x50
ib_send_cm_sidr_rep+0x3a/0x50 [ib_cm]
cma_send_sidr_rep+0xa1/0x160 [rdma_cm]
rdma_accept+0x25e/0x350 [rdma_cm]
ucma_accept+0x132/0x1cc [rdma_ucm]
ucma_write+0xbf/0x140 [rdma_ucm]
vfs_write+0xc1/0x340
ksys_write+0xb3/0xe0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 87c4c774cb ("RDMA/cm: Protect access to remote_sidr_table")
Link: https://lore.kernel.org/r/20210301081844.445823-1-leon@kernel.org
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAppPgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGeXYH/imZPBd4A1jIMehN
5HV2A53Z+MXmmaMuGj9X1KV6vsf55/xB+IhOoFdtRAIsO8c2yYSCO8i4+4R0XfYA
+/YFJeq672rojQnmh6XbpR8dugaAV7CUHy6n7KDsyvtT6EOCpwFSwkOb4X3tBRX6
TlYgm2d/xgV/wRHSgLVugK0MdFCLMAnyb7mkPfar9QrMgG1BiDKLq07xmwnS23On
TkqpJ9yZ/rJpUrrUqQYPShSO/FmA+fSfWs0CDv7EIrJ40LUScD6PZxSHWTIHtjLk
E4jFda6wuqLRVWsBwaBzUIdD0zk7X5quHRzEpbC5ga16SK6yrWvE5YJJXCguIEuZ
f3FMRYs=
=CAjn
-----END PGP SIGNATURE-----
Merge tag 'v5.11' into rdma.git for-next
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
smatch gives the warning:
drivers/infiniband/ulp/rtrs/rtrs-srv.c:1805 rtrs_rdma_connect() warn: passing zero to 'PTR_ERR'
Which is trying to say smatch has shown that srv is not an error pointer
and thus cannot be passed to PTR_ERR.
The solution is to move the list_add() down after full initilization of
rtrs_srv. To avoid holding the srv_mutex too long, only hold it during the
list operation as suggested by Leon.
Fixes: 03e9b33a0f ("RDMA/rtrs: Only allow addition of path to an already established session")
Link: https://lore.kernel.org/r/20210216143807.65923-1-jinpu.wang@cloud.ionos.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current code computes a number of channels per SRP target and spreads
them equally across all online NUMA nodes. Each channel is then assigned
a CPU within this node.
In the case of unbalanced, or even unpopulated nodes, some channels do not
get a CPU associated and thus do not get connected. This causes the SRP
connection to fail.
This patch solves the issue by rewriting channel computation and
allocation:
- Drop channel to node/CPU association as it had no real effect on
locality but added unnecessary complexity.
- Tweak the number of channels allocated to reduce CPU contention when
possible:
- Up to one channel per CPU (instead of up to 4 by node)
- At least 4 channels per node, unless ch_count module parameter is
used.
Link: https://lore.kernel.org/r/9cb4d9d3-30ad-2276-7eff-e85f7ddfb411@suse.com
Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
Add an extra timestamp format for mlx5_ib device.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* branch 'mlx5_timestamp':
RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
net/mlx5: Add new timestamp mode bits
In ConnectX6Dx device, HW can work in real time timestamp mode according
to the device capabilities per RQ/SQ/QP.
When the flag IB_UVERBS_CQ_FLAGS_TIMESTAMP_COMPLETION is set, the user
expect to get TS on the CQEs in free running format, so we need to fail
the QP creation if the current mode of the device doesn't support it.
Link: https://lore.kernel.org/r/20210209131107.698833-3-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The traditional DevX CQ creation flow goes through mlx5_core_create_cq()
which checks that the given EQN corresponds to an existing EQ and attaches
a devx handler to the EQN for the CQ.
In some cases the EQ will not be a kernel EQ, but will be controlled by
modify CQ, don't block creating these just because the EQN can't be found
in the kernel.
Link: https://lore.kernel.org/r/20210211085549.1277674-1-leon@kernel.org
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
put_device() decreases the ref-count and then the device will be
cleaned-up, while at is also add missing put_device in
rtrs_srv_create_once_sysfs_root_folders
This patch solves a kmemleak error as below:
unreferenced object 0xffff88809a7a0710 (size 8):
comm "kworker/4:1H", pid 113, jiffies 4295833049 (age 6212.380s)
hex dump (first 8 bytes):
62 6c 61 00 6b 6b 6b a5 bla.kkk.
backtrace:
[<0000000054413611>] kstrdup+0x2e/0x60
[<0000000078e3120a>] kobject_set_name_vargs+0x2f/0xb0
[<00000000f1a17a6b>] dev_set_name+0xab/0xe0
[<00000000d5502e32>] rtrs_srv_create_sess_files+0x2fb/0x314 [rtrs_server]
[<00000000ed11a1ef>] rtrs_srv_info_req_done+0x631/0x800 [rtrs_server]
[<000000008fc5aa8f>] __ib_process_cq+0x94/0x100 [ib_core]
[<00000000a9599cb4>] ib_cq_poll_work+0x32/0xc0 [ib_core]
[<00000000cfc376be>] process_one_work+0x4bc/0x980
[<0000000016e5c96a>] worker_thread+0x78/0x5c0
[<00000000c20b8be0>] kthread+0x191/0x1e0
[<000000006c9c0003>] ret_from_fork+0x3a/0x50
Fixes: baa5b28b7a ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add")
Link: https://lore.kernel.org/r/20210212134525.103456-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmemleak reported an error as below:
unreferenced object 0xffff8880674b7640 (size 64):
comm "kworker/4:1H", pid 113, jiffies 4296403507 (age 507.840s)
hex dump (first 32 bytes):
69 70 3a 31 39 32 2e 31 36 38 2e 31 32 32 2e 31 ip:192.168.122.1
31 30 40 69 70 3a 31 39 32 2e 31 36 38 2e 31 32 10@ip:192.168.12
backtrace:
[<0000000054413611>] kstrdup+0x2e/0x60
[<0000000078e3120a>] kobject_set_name_vargs+0x2f/0xb0
[<00000000ca2be3ee>] kobject_init_and_add+0xb0/0x120
[<0000000062ba5e78>] rtrs_srv_create_sess_files+0x14c/0x314 [rtrs_server]
[<00000000b45b7217>] rtrs_srv_info_req_done+0x5b1/0x800 [rtrs_server]
[<000000008fc5aa8f>] __ib_process_cq+0x94/0x100 [ib_core]
[<00000000a9599cb4>] ib_cq_poll_work+0x32/0xc0 [ib_core]
[<00000000cfc376be>] process_one_work+0x4bc/0x980
[<0000000016e5c96a>] worker_thread+0x78/0x5c0
[<00000000c20b8be0>] kthread+0x191/0x1e0
[<000000006c9c0003>] ret_from_fork+0x3a/0x50
It is caused by the not-freed kobject of rtrs_srv_sess. The kobject
embedded in rtrs_srv_sess has ref-counter 2 after calling
process_info_req(). Therefore it must call kobject_put twice. Currently
it calls kobject_put only once at rtrs_srv_destroy_sess_files because
kobject_del removes the state_in_sysfs flag and then kobject_put in
free_sess() is not called.
This patch moves kobject_del() into free_sess() so that the kobject of
rtrs_srv_sess can be freed. And also this patch adds the missing call of
sysfs_remove_group() to clean-up the sysfs directory.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
While adding a path from the client side to an already established
session, it was possible to provide the destination IP to a different
server. This is dangerous.
This commit adds an extra member to the rtrs_msg_conn_req structure, named
first_conn; which is supposed to notify if the connection request is the
first for that session or not.
On the server side, if a session does not exist but the first_conn
received inside the rtrs_msg_conn_req structure is 1, the connection
request is failed. This signifies that the connection request is for an
already existing session, and since the server did not find one, it is an
wrong connection request.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-3-jinpu.wang@cloud.ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
BUG: KASAN: stack-out-of-bounds in _mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
Read of size 4 at addr ffff8880d5a7f980 by task kworker/0:1H/565
CPU: 0 PID: 565 Comm: kworker/0:1H Tainted: G O 5.4.84-storage #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10
Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
Call Trace:
dump_stack+0x96/0xe0
print_address_description.constprop.4+0x1f/0x300
? irq_work_claim+0x2e/0x50
__kasan_report.cold.8+0x78/0x92
? _mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
kasan_report+0x10/0x20
_mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
? check_chain_key+0x1d7/0x2e0
? _mlx4_ib_post_recv+0x630/0x630 [mlx4_ib]
? lockdep_hardirqs_on+0x1a8/0x290
? stack_depot_save+0x218/0x56e
? do_profile_hits.isra.6.cold.13+0x1d/0x1d
? check_chain_key+0x1d7/0x2e0
? save_stack+0x4d/0x80
? save_stack+0x19/0x80
? __kasan_slab_free+0x125/0x170
? kfree+0xe7/0x3b0
rdma_write_sg+0x5b0/0x950 [rtrs_server]
The problem is when we send imm_wr, the type should be ib_rdma_wr, so hw
driver like mlx4 can do rdma_wr(wr), so fix it by use the ib_rdma_wr as
type for imm_wr.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pkt->offset field is never used except to assign it to 0. But it adds
lots of unneeded code. This patch removes the field and related code. This
causes a measurable improvement in performance.
Link: https://lore.kernel.org/r/20210211210455.3274-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ucma_process_join() allocates struct ucma_multicast mc and frees it if an
error occurs during its run. Specifically, if an error occurs in
copy_to_user(), a use-after-free might happen in the following scenario:
1. mc struct is allocated.
2. rdma_join_multicast() is called and succeeds. During its run,
cma_iboe_join_multicast() enqueues a work that will later use the
aforementioned mc struct.
3. copy_to_user() is called and fails.
4. mc struct is deallocated.
5. The work that was enqueued by cma_iboe_join_multicast() is run and
calls ucma_create_uevent() which tries to access mc struct (which is
freed by now).
Fix this bug by cancelling the work enqueued by cma_iboe_join_multicast().
Since cma_work_handler() frees struct cma_work, we don't use it in
cma_iboe_join_multicast() so we can safely cancel the work later.
The following syzkaller report revealed it:
BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0x;3f0 drivers/infiniband/core/ucma.c:272
Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108
CPU: 1 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ #257
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: rdma_cm cma_work_handler
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xbe/0xf9 lib/dump_stack.c:118
print_address_description.constprop.0+0x3e/0×60 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0×37 mm/kasan/report.c:562
ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272
ucma_event_handler+0xb7/0×3c0 drivers/infiniband/core/ucma.c:349
cma_cm_event_handler+0x5d/0×1c0 drivers/infiniband/core/cma.c:1977
cma_work_handler+0xfa/0×190 drivers/infiniband/core/cma.c:2718
process_one_work+0x54c/0×930 kernel/workqueue.c:2272
worker_thread+0x82/0×830 kernel/workqueue.c:2418
kthread+0x1ca/0×220 kernel/kthread.c:292
ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296
Allocated by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:461 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:434
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:664 [inline]
ucma_process_join+0x16e/0×3f0 drivers/infiniband/core/ucma.c:1453
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track+0x1c/0×30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355
__kasan_slab_free+0x112/0×160 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook mm/slub.c:1577 [inline]
slab_free mm/slub.c:3142 [inline]
kfree+0xb3/0×3e0 mm/slub.c:4124
ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88810b3ad100
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
192-byte region [ffff88810b3ad100, ffff88810b3ad1c0)
Fixes: b5de0c60cc ("RDMA/cma: Fix use after free race in roce multicast join")
Link: https://lore.kernel.org/r/20210211090517.1278415-1-leon@kernel.org
Reported-by: Amit Matityahu <mitm@nvidia.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'dev' not described in 'ib_port_immutable_read'
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'port' not described in 'ib_port_immutable_read'
Fixes: 7416790e22 ("RDMA/core: Introduce and use API to read port immutable data")
Link: https://lore.kernel.org/r/20210210151421.1108809-1-leon@kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following coccicheck warning:
./drivers/infiniband/hw/qedr/qedr.h:629:9-10: WARNING: return of 0/1 in
function 'qedr_qp_has_rq' with return type bool.
./drivers/infiniband/hw/qedr/qedr.h:620:9-10: WARNING: return of 0/1 in
function 'qedr_qp_has_sq' with return type bool.
Link: https://lore.kernel.org/r/1612949901-109873-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
FRMR is not well-supported on HIP08, it is re-designed for HIP09 and the
position of related fields is changed. Then the ULPs should be forbidden
to use FRMR on older hardwares.
Link: https://lore.kernel.org/r/1612924424-28217-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The register 0x07014 is actually the head pointer of CMDQ, and 0x07010
means tail pointer. Current definitions are confusing, so rename them and
related variables.
The next_to_use of structure hns_roce_v2_cmq_ring has the same semantics
as head, merge them into one member. The next_to_clean of structure
hns_roce_v2_cmq_ring has the same semantics as tail. After deleting
next_to_clean, tail should also be deleted.
Link: https://lore.kernel.org/r/1612688143-28226-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CMDQ works serially, after each successful transmission, the head and tail
pointers will be equal, so there is no need to check whether the queue is
full. At the same time, since the descriptor of each transmission is new,
there is no need to perform a cleanup operation. Then, the field named
next_to_clean in structure hns_roce_v2_cmq_ring is redundant.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When posting a multi-descriptors command, the error code of previous
failed descriptors may be rewrote to 0 by a later successful descriptor.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
last_status of structure hns_roce_v2_cmq has never been used, and the
variable named 'complete' in __hns_roce_cmq_send() is meaningless.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a system receives a REREG event from the SM, then the SM information
in the kernel is marked as invalid and a request is sent to the SM to
update the information. The SM information is invalid in that time period.
However, receiving a REREG also occurs simultaneously in user space
applications that are now trying to rejoin the multicast groups. Some of
those may be sendonly multicast groups which are then failing.
If the SM information is invalid then ib_sa_sendonly_fullmem_support()
returns false. That is wrong because it just means that we do not know yet
if the potentially new SM supports sendonly joins.
Sendonly join was introduced in 2015 and all the Subnet managers have
supported it ever since. So there is no point in checking if a subnet
manager supports it.
Should an old opensm get a request for a sendonly join then the request
will fail. The code that is removed here accomodated that situation and
fell back to a full join.
Falling back to a full join is problematic in itself. The reason to use
the sendonly join was to reduce the traffic on the Infiniband fabric
otherwise one could have just stayed with the regular join. So this patch
may cause users of very old opensms to discover that lots of traffic
needlessly crosses their IB fabrics.
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2101281845160.13303@www.lameter.com
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Support 400Gbps IB rate in mlx5 driver.
Link: https://lore.kernel.org/r/20210209130429.698237-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qedr_gsi_post_send() has a debug output which prints the return value of
in_irq() and irqs_disabled().
The result of the in_irq(), even if invoked from an interrupt handler, is
subject to change depending on the `threadirqs' command line switch. The
result of irqs_disabled() is always be 1 because the function acquires
spinlock_t with spin_lock_irqsave().
Remove in_irq() and irqs_disabled() from the debug output because it
provides little value.
Link: https://lore.kernel.org/r/20210208193347.383254-1-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch changes the type of init_send_wqe in rxe_verbs.c to void since
it always returns 0. It also separates out the code that copies inline
data into the send wqe as copy_inline_data_to_wqe().
Link: https://lore.kernel.org/r/20210206002437.2756-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
checkpatch -f found 3 warnings in RDMA/rxe
1. a missing space following switch
2. return followed by else
3. use of strlcpy() instead of strscpy().
This patch fixes each of these. In
...
} elseif (...) {
...
return 0;
} else
...
The middle block can be safely moved since it is completely independent of
the other code.
Link: https://lore.kernel.org/r/20210205230525.49068-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cleanup the synchronize_srcu() from the ODP flow as it was found to be a
very heavy time consumer as part of dereg_mr.
For example de-registration of 10000 ODP MRs each with size of 2M hugepage
took 19.6 sec comparing de-registration of same number of non ODP MRs that
took 172 ms.
The new locking scheme uses the wait_event() mechanism which follows the
use count of the MR instead of using synchronize_srcu().
By that change, the time required for the above test took 95 ms which is
even better than the non ODP flow.
Once fully dropped the srcu usage, had to come with a lock to protect the
XA access.
As part of using the above mechanism we could also clean the
num_deferred_work stuff and follow the use count instead.
Link: https://lore.kernel.org/r/20210202071309.2057998-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to use a for loop to assign values for an array of cmd
descriptors which has only two elements.
Link: https://lore.kernel.org/r/1612517974-31867-13-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hns driver wrap around the consumer index of AEQ and CEQ when they
reach to two times of queue entries number for owner mechanism, actually,
it is unnecessary to wrap around since the hardware itself will mask it
before use.
Link: https://lore.kernel.org/r/1612517974-31867-12-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All fields of WQE will be rewrote, so the memset is unnecessary. And when
SQ is working in OWNER mode, the pipeline may prefetch the WQEs beyond PI,
the memset operation may flip the owner bit too early, then the pipeline
may get a wrong WQ.
Link: https://lore.kernel.org/r/1612517974-31867-11-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use macros instead of magic numbers to represent shift of dma_handle_wqe,
dma_handle_idx and UDP destination port number of RoCEv2.
Link: https://lore.kernel.org/r/1612517974-31867-10-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_device.h is not specific to hardware, some definitions are only
used for HIP06, they should be moved into hns_roce_hw_v1.h.
Link: https://lore.kernel.org/r/1612517974-31867-9-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, the driver updates doorbell looks like this:
post()
{
wqe.field = 0x111;
wmb();
update_wq_db();
}
update_wq_db()
{
db.field = 0x222;
__raw_writeq(db, db_reg);
}
writeq() is a better choice than __raw_writeq() because it calls dma_wmb()
to barrier in ARM64, and dma_wmb() is better than wmb() for ROCEE device.
This patch removes all wmb() before updating doorbell of SQ/RQ/CQ/SRQ by
replacing __raw_writeq() with writeq() to improve performence. The new
process looks like this:
post()
{
wqe.field = 0x111;
update_wq_db();
}
update_wq_db()
{
db.field = 0x222;
writeq(db, db_reg);
}
Link: https://lore.kernel.org/r/1612517974-31867-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This feature should only be enabled by querying capability from firmware.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1612517974-31867-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the mapped page count checking flow to avoid invalid page size when
creating MTR.
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Link: https://lore.kernel.org/r/1612517974-31867-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This bit should be in type of enum ib_sig_type, or there will be a sparse
warning.
Fixes: bfe860351e ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want
to record sgid index into QPC. For UD QPs, it is useless because it will
be included in WQE. For RC QPs, it will be filled in
hns_roce_set_path(). So sgid index shouldn't be filled by default. Then
hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called
in it.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Direct wqe is a mechanism to fill wqe directly into the hardware. In the
case of light load, the wqe will be filled into pcie bar space of the
hardware, this will reduce one memory access operation and therefore
reduce the latency.
Link: https://lore.kernel.org/r/1611997513-27107-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ in the hns driver consists of the following four parts:
* wqe buf: the buffer to store WQE.
* wqe_idx buf: the cqe of SRQ may be not generated in the order of wqe, so
the wqe_idx corresponding to the idle WQE needs to be pushed into the
index queue which is a FIFO, then it instructs the hardware to obtain
the corresponding WQE.
* bitmap: bitmap is used to generate and release wqe_idx. When the user
has a new WR, the driver finds the idx of the idle wqe in bitmap. When
the CQE of wqe is generated, the driver will release the idx.
* wr_id buf: wr_id buf is used to store the user's wr_id, then return it
to the user when poll_cq verb is invoked.
The process of post SRQ recv is refactored to make preceding code clearer.
Link: https://lore.kernel.org/r/1611997090-48820-12-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 requires the driver to clear the unused data segments in wqe
buffer to make the hns ROCEE stop reading the remaining invalid sges for
RQ.
Link: https://lore.kernel.org/r/1611997090-48820-11-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reduce parameter numbers of write_srqc() and move some related code into
it from alloc_srqc().
Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the SRQ creation process into multiple steps and encapsulate them
into functions.
Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each SRQs contain an reserved WQE, it is inappropriate and should be
removed.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When an error occurs, the qp_table must be cleared, regardless of whether
the SRQ feature is enabled.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.
Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.
Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_udp_encap_recv() drops the reference to rxe->ib_dev taken by
rxe_get_dev_from_net() which should be held until each received skb is
freed. This patch moves the calls to ib_device_put() to each place a
received skb is freed. It also takes references to the ib_device for each
cloned skb created to process received multicast packets.
Fixes: 4c173f596b ("RDMA/rxe: Use ib_device_get_by_netdev() instead of open coding")
Link: https://lore.kernel.org/r/20210128233318.2591-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header. On the loopback path this was not correctly accounted
for. This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_rcv_mcast_pkt() in rxe_recv.c can leak SKBs in error path code. The
loop over the QPs attached to a multicast group creates new cloned SKBs
for all but the last QP in the list and passes the SKB and its clones to
rxe_rcv_pkt() for further processing. Any QPs that do not pass some checks
are skipped. If the last QP in the list fails the tests the SKB is
leaked. This patch checks if the SKB for the last QP was used and if not
frees it. Also removes a redundant loop invariant assignment.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Fixes: 71abf20b28 ("RDMA/rxe: Handle skb_clone() failure in rxe_recv.c")
Link: https://lore.kernel.org/r/20210128174752.16128-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In check_keys() in rxe_recv.c
if ((...) && pkt->mask) {
...
}
always has pkt->mask non zero since in rxe_udp_encap_recv() pkt->mask is
always set to RXE_GRH_MASK (!= 0). There is no obvious reason for this
additional test and the original intent is lost. This patch simplifies the
expression.
Fixes: 8b7b59d030 ("IB/rxe: remove redudant qpn check")
Link: https://lore.kernel.org/r/20210127224203.2812-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of open coding the loop for port iteration, use rdma_for_each_port
macro provided by core.
To use such macro, early initialization of phys_port_cnt is needed.
Hence, initialize such constant early enough in the init stage.
Whichever functions are called with port using rdma_for_each_port(),
convert their port type from u8 to unsigned int to match the core API.
Link: https://lore.kernel.org/r/20210203130133.4057329-6-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently mlx5 driver caches port GID table length for 2 ports. It is
also cached by IB core as port immutable data.
When mlx5 representor ports are present, which are usually more than 2,
invalid access to port_caps array can happen while validating the GID
table length which is only for 2 ports.
To avoid this, take help of the IB cores port immutable data by exposing
an API to read the port immutable fields.
Remove mlx5 driver's internal cache, thereby reduce code and data.
Link: https://lore.kernel.org/r/20210203130133.4057329-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Improve query port functionality for representor port as below.
1. RoCE Qkey violation counters are not applicable for representor port.
2. Avoid setting gid_tbl_len twice for representor port.
3. Avoid setting ip_gids and IB_PORT_CM_SUP property for representor port
as GID table is empty and CM support is not present in representor
mode.
Link: https://lore.kernel.org/r/20210203130133.4057329-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pkey table length for all the ports of the device is the same. Currently
get_ports_cap() reads and stores it for each port by querying the device
which reads more than just pkey table length.
For representor device ports which can be in range of hundreds, it queries
is for each such port and end up returning same value for all the ports.
When in representor mode, modify QP accesses pkey port caps for a port
index that can be outside of the port_caps table.
Hence, simplify the logic to query the max pkey table length only once
during device initialization sequence.
Link: https://lore.kernel.org/r/20210203130133.4057329-3-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_port_caps are RDMA specific capabilities. These are not used by the
mlx5_core_device at all. Move them to mlx5_ib_dev where it is used and
reduce the scope of it to multiple drivers.
Link: https://lore.kernel.org/r/20210203130133.4057329-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Representor port has only one default pkey. Hence have simpler query pkey
callback or it.
Link: https://lore.kernel.org/r/20210127150010.1876121-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IB HCA port starts from 1. Use IB core provided port iterator API to avoid
any assumption with start port number.
Link: https://lore.kernel.org/r/20210127150010.1876121-11-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use IB core provided routine to check if the port is valid or not and to
iterate over IB ports.
Link: https://lore.kernel.org/r/20210127150010.1876121-10-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When RDMA device has 255 ports, loop iterator i overflows. Due to which
cm_add_one() port iterator loops infinitely. Use core provided port
iterator to avoid the infinite loop.
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20210127150010.1876121-9-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When mlx5_ib_stage_init_init() fails, return the error code related to
failure instead of -ENOMEM.
Fixes: 16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Link: https://lore.kernel.org/r/20210127150010.1876121-8-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'select' field in the get/set feature admin command is unimplemented,
unused and misleading, remove it. The command always refers to the
current values.
Link: https://lore.kernel.org/r/20210126120702.9807-5-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The indentation in the subsequent comment lines is unnecessary, remove it.
Link: https://lore.kernel.org/r/20210126120702.9807-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The EFA_DMA_ADDR_TO_UINT32_HIGH/LOW macros are the same as the kernel's
upper/lower_32_bits, remove them and use kernel macros instead.
Link: https://lore.kernel.org/r/20210126120702.9807-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A pointer to store the command completion must be provided as it is always
used in efa_com_put_comp_ctx() to return the completion context back to
the pool. Remove the NULL pointer check and the redundant 'status' field
stored on the context as it could be retrieved from the completion itself.
Link: https://lore.kernel.org/r/20210126120702.9807-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Function parameter or member 'packet' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Function parameter or member 'is_fecn' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Excess function parameter 'qp' description in 'hfi1_send_rc_ack'
Link: https://lore.kernel.org/r/20210126124732.3320971-21-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/verbs.c:741: warning: Function parameter or member 'qp' not described in 'update_tx_opstats'
drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Function parameter or member 'pkey' not described in 'egress_pkey_check'
drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Excess function parameter 'bkey' description in 'egress_pkey_check'
drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'qp' not described in 'get_send_routine'
drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'ps' not described in 'get_send_routine'
Link: https://lore.kernel.org/r/20210126124732.3320971-20-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'fd' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'tidbuf' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'node' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'idx' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'npages' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'mapped' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:196: warning: Function parameter or member 'fd' not described in 'pin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:196: warning: Function parameter or member 'tidbuf' not described in 'pin_rcv_pages'
Link: https://lore.kernel.org/r/20210126124732.3320971-19-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/ud.c:477: warning: Function parameter or member 'ps' not described in 'hfi1_make_ud_req'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Function parameter or member 'packet' not described in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'ibp' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'hdr' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'rcv_flags' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'data' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'tlen' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'qp' description in 'hfi1_ud_rcv'
Link: https://lore.kernel.org/r/20210126124732.3320971-18-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/uc.c:64: warning: Function parameter or member 'ps' not described in 'hfi1_make_uc_req'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Function parameter or member 'packet' not described in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'ibp' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'hdr' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'rcv_flags' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'data' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'tlen' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'qp' description in 'hfi1_uc_rcv'
Link: https://lore.kernel.org/r/20210126124732.3320971-17-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/tid_rdma.c:321: warning: Function parameter or member 'rdi' not described in 'qp_to_rcd'
drivers/infiniband/hw/hfi1/tid_rdma.c:321: warning: Function parameter or member 'qp' not described in 'qp_to_rcd'
drivers/infiniband/hw/hfi1/tid_rdma.c:505: warning: Function parameter or member 'queue' not described in 'kernel_tid_waiters'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'rcd' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'queue' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'qp' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:562: warning: Function parameter or member 'queue' not described in 'queue_qp_for_tid_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:607: warning: Function parameter or member 'qp' not described in 'tid_rdma_schedule_tid_wakeup'
drivers/infiniband/hw/hfi1/tid_rdma.c:639: warning: Function parameter or member 'work' not described in 'tid_rdma_trigger_resume'
drivers/infiniband/hw/hfi1/tid_rdma.c:666: warning: Function parameter or member 'qp' not described in '_tid_rdma_flush_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:666: warning: Function parameter or member 'queue' not described in '_tid_rdma_flush_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:713: warning: Function parameter or member 'rcd' not described in 'kern_reserve_flow'
drivers/infiniband/hw/hfi1/tid_rdma.c:713: warning: Function parameter or member 'last' not described in 'kern_reserve_flow'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'flow' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'pages' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'npages' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'list' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'list' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'idx' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'pages' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'sets' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'flow' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'pages' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'npages' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'list' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'flow' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'pages' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'ss' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'last' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1604: warning: Function parameter or member 'req' not described in 'hfi1_kern_exp_rcv_free_flows'
drivers/infiniband/hw/hfi1/tid_rdma.c:3458: warning: Function parameter or member 'qp' not described in 'hfi1_tid_write_alloc_resources'
drivers/infiniband/hw/hfi1/tid_rdma.c:3458: warning: Function parameter or member 'intr_ctx' not described in 'hfi1_tid_write_alloc_resources'
Link: https://lore.kernel.org/r/20210126124732.3320971-16-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/sdma.c:2476: warning: Function parameter or member 'count_out' not described in 'sdma_send_txlist'
drivers/infiniband/hw/hfi1/sdma.c:2476: warning: Excess function parameter 'count' description in 'sdma_send_txlist'
Link: https://lore.kernel.org/r/20210126124732.3320971-15-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/ruc.c:277: warning: Function parameter or member 'bth1' not described in 'hfi1_make_ruc_header_16B'
drivers/infiniband/hw/hfi1/ruc.c:365: warning: Function parameter or member 'bth1' not described in 'hfi1_make_ruc_header_9B'
drivers/infiniband/hw/hfi1/ruc.c:472: warning: Function parameter or member 'tid' not described in 'hfi1_schedule_send_yield'
drivers/infiniband/hw/hfi1/ruc.c:472: warning: Excess function parameter 'timeout' description in 'hfi1_schedule_send_yield'
Link: https://lore.kernel.org/r/20210126124732.3320971-14-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/qp.c:195: warning: Function parameter or member 'dev' not described in 'verbs_mtu_enum_to_int'
drivers/infiniband/hw/hfi1/qp.c:195: warning: Function parameter or member 'mtu' not described in 'verbs_mtu_enum_to_int'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'qp' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'wqe' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'call_send' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:922: warning: Function parameter or member 'qp' not described in 'hfi1_qp_iter_cb'
drivers/infiniband/hw/hfi1/qp.c:922: warning: Function parameter or member 'v' not described in 'hfi1_qp_iter_cb'
Link: https://lore.kernel.org/r/20210126124732.3320971-13-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/rc.c:430: warning: Function parameter or member 'ps' not described in 'hfi1_make_rc_req'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Function parameter or member 'packet' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Function parameter or member 'is_fecn' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Excess function parameter 'qp' description in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'aeth' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'val' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'rcd' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2554: warning: Function parameter or member 'rcd' not described in 'rc_rcv_error'
Link: https://lore.kernel.org/r/20210126124732.3320971-12-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/pio_copy.c:73: warning: Function parameter or member 'dd' not described in 'pio_copy'
Link: https://lore.kernel.org/r/20210126124732.3320971-11-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/pcie.c:343: warning: Function parameter or member 'dd' not described in 'restore_pci_variables'
drivers/infiniband/hw/hfi1/pcie.c:402: warning: Function parameter or member 'dd' not described in 'save_pci_variables'
Link: https://lore.kernel.org/r/20210126124732.3320971-10-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/netdev_rx.c:473: warning: Function parameter or member 'start_id' not described in 'hfi1_netdev_get_first_data'
drivers/infiniband/hw/hfi1/netdev_rx.c:473: warning: Excess function parameter 'id' description in 'hfi1_netdev_get_first_data'
Link: https://lore.kernel.org/r/20210126124732.3320971-9-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/qp.c:1929: warning: Function parameter or member 'post_parms' not described in 'rvt_qp_valid_operation'
Link: https://lore.kernel.org/r/20210126124732.3320971-8-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mad.c:78: warning: Function parameter or member 'in_mad_size' not described in 'rvt_process_mad'
Link: https://lore.kernel.org/r/20210126124732.3320971-7-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/msix.c:120: warning: Function parameter or member 'name' not described in 'msix_request_irq'
drivers/infiniband/hw/hfi1/msix.c:120: warning: Excess function parameter 'idx' description in 'msix_request_irq'
Link: https://lore.kernel.org/r/20210126124732.3320971-6-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'am' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'data' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'resp_len' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'max_len' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'local_mad' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:4919: warning: Function parameter or member 'out_mad_size' not described in 'hfi1_process_mad'
drivers/infiniband/hw/hfi1/mad.c:4919: warning: Function parameter or member 'out_mad_pkey_index' not described in 'hfi1_process_mad'
Link: https://lore.kernel.org/r/20210126124732.3320971-5-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'tidfunc' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'wakeup' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'sdma_drained' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'init_priority' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Excess function parameter 'resume' description in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:94: warning: Function parameter or member 'w' not described in 'iowait_set_work_flag'
Link: https://lore.kernel.org/r/20210126124732.3320971-4-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/srq.c:78: warning: Function parameter or member 'ibsrq' not described in 'rvt_create_srq'
drivers/infiniband/sw/rdmavt/srq.c:78: warning: Excess function parameter 'ibpd' description in 'rvt_create_srq'
drivers/infiniband/sw/rdmavt/srq.c:336: warning: Function parameter or member 'udata' not described in 'rvt_destroy_srq'
Link: https://lore.kernel.org/r/20210126124732.3320971-3-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'msg' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'msgl' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'hwmsg' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'hwerrs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'hwerrmsgs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'nhwerrmsgs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'msg' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'msgl' not described in 'hfi1_format_hwerrors'
Link: https://lore.kernel.org/r/20210126124732.3320971-2-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
One of the pool APIs for when caller is holding lock was not defined but
is declared in rxe_pool.h. This patch adds the definition.
Link: https://lore.kernel.org/r/20210125211641.2694-7-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_pool.c uses the field pool->state to mark a pool as invalid when it is
shut down and checks it in several pool APIs to verify that the pool has
not been shut down. This is unneeded because the pools are not marked
invalid unless the entire driver is being removed at which point no
functional APIs should or could be executing. This patch removes this
field and associated code.
Link: https://lore.kernel.org/r/20210125211641.2694-6-rpearson@hpe.com
Suggested-by: zyjzyj2000@gmail.c
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_pool.c takes references to the pool and ib_device structs for each
object allocated and also keeps an atomic num_elem count in each
pool. This is more work than is needed. Pool allocation is only called
from verbs APIs which already have references to ib_device and pools are
only diasbled when the driver is removed so no protection of the pool
addresses are needed. The elem count is used to warn if elements are still
present in a pool when it is cleaned up which is useful.
This patch eliminates the references to the ib_device and pool structs.
Link: https://lore.kernel.org/r/20210125211641.2694-5-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_alloc() used the RXE_POOL_ATOMIC flag in rxe_type_info to select
GFP_ATOMIC in calls to kzalloc(). This was intended to handle cases where
an object could be created in interrupt context. This no longer occurs
since allocating those objects has moved into the core so this flag is not
necessary. An incorrect use of this flag was still present for rxe_mc_elem
objects and is removed.
Link: https://lore.kernel.org/r/20210125211641.2694-4-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The names and comments of the 'unlocked' pool APIs are very misleading and
not what was intended. This patch replaces 'rxe_xxx_nl' with
'rxe_xxx_locked' with comments indicating that the caller is expected to
hold the rxe pool lock.
Link: https://lore.kernel.org/r/20210125211641.2694-3-rpearson@hpe.com
Reported-by: Hillf Danton <hdanton@sina.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A recent patch which added an 'unlocked' version of rxe_alloc introduced a
bug causing kzalloc(..., GFP_KERNEL) to be called while holding a spin
lock. This patch corrects that error.
rxe_alloc_nl() should always be called while holding the pool->pool_lock
so the 2nd argument to kzalloc there should be GFP_ATOMIC.
rxe_alloc() prior to the change only locked the code around checking that
pool->state is RXE_POOL_STATE_VALID to avoid races between working threads
and a thread shutting down the rxe driver. This patch reverts rxe_alloc()
to this behavior so the lock is not held when kzalloc() is called.
Link: https://lore.kernel.org/r/20210125211641.2694-2-rpearson@hpe.com
Reported-by: syzbot+ec2fd72374785d0e558e@syzkaller.appspotmail.com
Fixes: 3853c35e24 ("RDMA/rxe: Add unlocked versions of pool APIs")
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, polling a umad device will always works, even if the device was
disassociated. A disassociated device should immediately return EPOLLERR
from poll(). Otherwise userspace is endlessly hung on poll() with no idea
that the device has been removed from the system.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-3-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
MAD message received by the user has EINVAL error in all flows
including when the device is disassociated. That makes it impossible
for the applications to treat such flow differently.
Change it to return EIO, so the applications will be able to perform
disassociation recovery.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cited commit disallowed creating any QP which isn't raw ethernet, reg
umr or the special UD qp for testing WC, this proved too strict.
While modify can't be done (no GIDS/GID table for example) just creating a
QP is okay.
This patch partially reverts the bellow mentioned commit and places the
restriction at the modify QP stage and not at the creation. DEVX commands
should be used to manipulate such QPs.
Fixes: 42caf9cb59 ("RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled")
Link: https://lore.kernel.org/r/20210125120709.836718-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When creating or re-registering an MR, storing the PDN, access flag and
IOVA information ASAP can simplify the number of parameters passed into
the subsequent process.
Link: https://lore.kernel.org/r/1611395282-991-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the hns_roce_mtr_create() into serval small functions, remove unused
member in 'struct hns_roce_buf_attr' and delete unnecessary MTR page count
check flow to make the MTR creation related codes clearer.
Link: https://lore.kernel.org/r/1611395282-991-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/qp.c:165: warning: Function parameter or member 'rdi' not described in 'rvt_wss_init'
drivers/infiniband/sw/rdmavt/qp.c:329: warning: Function parameter or member 'rdi' not described in 'init_qpn_table'
drivers/infiniband/sw/rdmavt/qp.c:534: warning: Function parameter or member 'type' not described in 'alloc_qpn'
drivers/infiniband/sw/rdmavt/qp.c:664: warning: Function parameter or member 'wqe' not described in 'rvt_swqe_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:664: warning: Function parameter or member 'lkey' not described in 'rvt_swqe_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:682: warning: Function parameter or member 'qp' not described in 'rvt_qp_sends_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:682: warning: Function parameter or member 'lkey' not described in 'rvt_qp_sends_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:706: warning: Function parameter or member 'qp' not described in 'rvt_qp_acks_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:706: warning: Function parameter or member 'lkey' not described in 'rvt_qp_acks_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:866: warning: Function parameter or member 'rdi' not described in 'rvt_init_qp'
drivers/infiniband/sw/rdmavt/qp.c:920: warning: Function parameter or member 'rdi' not described in '_rvt_reset_qp'
drivers/infiniband/sw/rdmavt/qp.c:1736: warning: Function parameter or member 'udata' not described in 'rvt_destroy_qp'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'qp' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'post_parms' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'wr' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:2020: warning: Function parameter or member 'call_send' not described in 'rvt_post_one_wr'
drivers/infiniband/sw/rdmavt/qp.c:2621: warning: Function parameter or member 'qp' not described in 'rvt_stop_rnr_timer'
Link: https://lore.kernel.org/r/20210121094519.2044049-31-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba6120.c:1229: warning: Function parameter or member 'ppd' not described in 'qib_6120_bringup_serdes'
drivers/infiniband/hw/qib/qib_iba6120.c:1229: warning: Excess function parameter 'dd' description in 'qib_6120_bringup_serdes'
drivers/infiniband/hw/qib/qib_iba6120.c:1436: warning: Function parameter or member 'ppd' not described in 'qib_6120_setup_setextled'
drivers/infiniband/hw/qib/qib_iba6120.c:1436: warning: Excess function parameter 'dd' description in 'qib_6120_setup_setextled'
drivers/infiniband/hw/qib/qib_iba6120.c:1836: warning: Function parameter or member 'type' not described in 'qib_6120_put_tid'
drivers/infiniband/hw/qib/qib_iba6120.c:1836: warning: Excess function parameter 'tidtype' description in 'qib_6120_put_tid'
drivers/infiniband/hw/qib/qib_iba6120.c:1903: warning: Function parameter or member 'type' not described in 'qib_6120_put_tid_2'
drivers/infiniband/hw/qib/qib_iba6120.c:1903: warning: Excess function parameter 'tidtype' description in 'qib_6120_put_tid_2'
drivers/infiniband/hw/qib/qib_iba6120.c:1944: warning: Function parameter or member 'rcd' not described in 'qib_6120_clear_tids'
drivers/infiniband/hw/qib/qib_iba6120.c:1944: warning: Excess function parameter 'ctxt' description in 'qib_6120_clear_tids'
drivers/infiniband/hw/qib/qib_iba6120.c:2018: warning: Function parameter or member 'kinfo' not described in 'qib_6120_get_base_info'
drivers/infiniband/hw/qib/qib_iba6120.c:2018: warning: Excess function parameter 'kbase' description in 'qib_6120_get_base_info'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Function parameter or member 'ppd' not described in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Function parameter or member 'reg' not described in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Excess function parameter 'dd' description in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Excess function parameter 'creg' description in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2620: warning: Function parameter or member 't' not described in 'qib_get_6120_faststats'
Link: https://lore.kernel.org/r/20210121094519.2044049-30-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_verbs.c:1077: warning: Function parameter or member 'ppd' not described in 'qib_get_counters'
drivers/infiniband/hw/qib/qib_verbs.c:1077: warning: Excess function parameter 'dd' description in 'qib_get_counters'
drivers/infiniband/hw/qib/qib_verbs.c:1686: warning: Function parameter or member 'qp' not described in '_qib_schedule_send'
drivers/infiniband/hw/qib/qib_verbs.c:1703: warning: Function parameter or member 'qp' not described in 'qib_schedule_send'
Link: https://lore.kernel.org/r/20210121094519.2044049-29-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba7322.c:2521: warning: Function parameter or member 'ppd' not described in 'qib_7322_mini_quiet_serdes'
drivers/infiniband/hw/qib/qib_iba7322.c:2521: warning: Excess function parameter 'dd' description in 'qib_7322_mini_quiet_serdes'
drivers/infiniband/hw/qib/qib_iba7322.c:3768: warning: Function parameter or member 'type' not described in 'qib_7322_put_tid'
drivers/infiniband/hw/qib/qib_iba7322.c:3768: warning: Excess function parameter 'tidtype' description in 'qib_7322_put_tid'
drivers/infiniband/hw/qib/qib_iba7322.c:3806: warning: Function parameter or member 'rcd' not described in 'qib_7322_clear_tids'
drivers/infiniband/hw/qib/qib_iba7322.c:3806: warning: Excess function parameter 'ctxt' description in 'qib_7322_clear_tids'
drivers/infiniband/hw/qib/qib_iba7322.c:3872: warning: Function parameter or member 'kinfo' not described in 'qib_7322_get_base_info'
drivers/infiniband/hw/qib/qib_iba7322.c:3872: warning: Excess function parameter 'kbase' description in 'qib_7322_get_base_info'
drivers/infiniband/hw/qib/qib_iba7322.c:4730: warning: Function parameter or member 'reg' not described in 'qib_portcntr_7322'
drivers/infiniband/hw/qib/qib_iba7322.c:4730: warning: Excess function parameter 'creg' description in 'qib_portcntr_7322'
drivers/infiniband/hw/qib/qib_iba7322.c:5109: warning: Function parameter or member 't' not described in 'qib_get_7322_faststats'
drivers/infiniband/hw/qib/qib_iba7322.c:7189: warning: Function parameter or member 'pdev' not described in 'qib_init_iba7322_funcs'
drivers/infiniband/hw/qib/qib_iba7322.c:7189: warning: Excess function parameter 'dev' description in 'qib_init_iba7322_funcs'
Link: https://lore.kernel.org/r/20210121094519.2044049-28-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mr.c:380: warning: Function parameter or member 'virt_addr' not described in 'rvt_reg_user_mr'
drivers/infiniband/sw/rdmavt/mr.c:449: warning: Function parameter or member 'qp' not described in 'rvt_dereg_clean_qp_cb'
drivers/infiniband/sw/rdmavt/mr.c:449: warning: Function parameter or member 'v' not described in 'rvt_dereg_clean_qp_cb'
drivers/infiniband/sw/rdmavt/mr.c:466: warning: Function parameter or member 'mr' not described in 'rvt_dereg_clean_qps'
drivers/infiniband/sw/rdmavt/mr.c:484: warning: Function parameter or member 'mr' not described in 'rvt_check_refs'
drivers/infiniband/sw/rdmavt/mr.c:484: warning: Function parameter or member 't' not described in 'rvt_check_refs'
drivers/infiniband/sw/rdmavt/mr.c:513: warning: Function parameter or member 'mr' not described in 'rvt_mr_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:513: warning: Function parameter or member 'lkey' not described in 'rvt_mr_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:526: warning: Function parameter or member 'ss' not described in 'rvt_ss_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:526: warning: Function parameter or member 'lkey' not described in 'rvt_ss_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:551: warning: Function parameter or member 'udata' not described in 'rvt_dereg_mr'
Link: https://lore.kernel.org/r/20210121094519.2044049-27-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/file_ops.c:1533: warning: Function parameter or member 'arg' not described in 'manage_rcvq'
drivers/infiniband/hw/hfi1/file_ops.c:1533: warning: Excess function parameter 'start_stop' description in 'manage_rcvq'
Link: https://lore.kernel.org/r/20210121094519.2044049-26-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba7220.c:1726: warning: Function parameter or member 'ppd' not described in 'qib_setup_7220_setextled'
drivers/infiniband/hw/qib/qib_iba7220.c:1726: warning: Excess function parameter 'dd' description in 'qib_setup_7220_setextled'
drivers/infiniband/hw/qib/qib_iba7220.c:2154: warning: Function parameter or member 'type' not described in 'qib_7220_put_tid'
drivers/infiniband/hw/qib/qib_iba7220.c:2154: warning: Excess function parameter 'tidtype' description in 'qib_7220_put_tid'
drivers/infiniband/hw/qib/qib_iba7220.c:2192: warning: Function parameter or member 'rcd' not described in 'qib_7220_clear_tids'
drivers/infiniband/hw/qib/qib_iba7220.c:2192: warning: Excess function parameter 'ctxt' description in 'qib_7220_clear_tids'
drivers/infiniband/hw/qib/qib_iba7220.c:2248: warning: Function parameter or member 'kinfo' not described in 'qib_7220_get_base_info'
drivers/infiniband/hw/qib/qib_iba7220.c:2248: warning: Excess function parameter 'kbase' description in 'qib_7220_get_base_info'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Function parameter or member 'ppd' not described in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Function parameter or member 'reg' not described in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Excess function parameter 'dd' description in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Excess function parameter 'creg' description in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:3242: warning: Function parameter or member 't' not described in 'qib_get_7220_faststats'
drivers/infiniband/hw/qib/qib_iba7220.c:4479: warning: Function parameter or member 'pdev' not described in 'qib_init_iba7220_funcs'
drivers/infiniband/hw/qib/qib_iba7220.c:4479: warning: Excess function parameter 'dev' description in 'qib_init_iba7220_funcs'
Link: https://lore.kernel.org/r/20210121094519.2044049-25-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/exp_rcv.c:56: warning: Function parameter or member 'set' not described in 'hfi1_exp_tid_set_init'
drivers/infiniband/hw/hfi1/exp_rcv.c:66: warning: Function parameter or member 'rcd' not described in 'hfi1_exp_tid_group_init'
drivers/infiniband/hw/hfi1/exp_rcv.c:77: warning: Function parameter or member 'rcd' not described in 'hfi1_alloc_ctxt_rcv_groups'
drivers/infiniband/hw/hfi1/exp_rcv.c:114: warning: Function parameter or member 'rcd' not described in 'hfi1_free_ctxt_rcv_groups'
Link: https://lore.kernel.org/r/20210121094519.2044049-24-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mcast.c:195: warning: Function parameter or member 'rdi' not described in 'rvt_mcast_add'
drivers/infiniband/sw/rdmavt/mcast.c:195: warning: Function parameter or member 'ibp' not described in 'rvt_mcast_add'
Link: https://lore.kernel.org/r/20210121094519.2044049-23-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'hwdev' not described in 'qib_map_page'
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'page' not described in 'qib_map_page'
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'daddr' not described in 'qib_map_page'
Link: https://lore.kernel.org/r/20210121094519.2044049-22-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'in' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'in_mad_size' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out_mad_size' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out_mad_pkey_index' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Excess function parameter 'in_mad' description in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Excess function parameter 'out_mad' description in 'rvt_process_mad'
Link: https://lore.kernel.org/r/20210121094519.2044049-21-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_ud.c:231: warning: Function parameter or member 'flags' not described in 'qib_make_ud_req'
Link: https://lore.kernel.org/r/20210121094519.2044049-20-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_uc.c:49: warning: Function parameter or member 'flags' not described in 'qib_make_uc_req'
Link: https://lore.kernel.org/r/20210121094519.2044049-19-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_tx.c:383: warning: Function parameter or member 'rcd' not described in 'qib_chg_pioavailkernel'
Link: https://lore.kernel.org/r/20210121094519.2044049-18-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_twsi.c:175: warning: Function parameter or member 'last' not described in 'rd_byte'
Link: https://lore.kernel.org/r/20210121094519.2044049-17-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/chip.c:1335: warning: Function parameter or member 'dd' not described in 'hfi1_addr_from_offset'
drivers/infiniband/hw/hfi1/chip.c:1335: warning: Function parameter or member 'offset' not described in 'hfi1_addr_from_offset'
drivers/infiniband/hw/hfi1/chip.c:1350: warning: Function parameter or member 'dd' not described in 'read_csr'
drivers/infiniband/hw/hfi1/chip.c:1350: warning: Function parameter or member 'offset' not described in 'read_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'dd' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'offset' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'value' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1385: warning: Function parameter or member 'dd' not described in 'get_csr_addr'
drivers/infiniband/hw/hfi1/chip.c:1385: warning: Function parameter or member 'offset' not described in 'get_csr_addr'
drivers/infiniband/hw/hfi1/chip.c:8442: warning: Function parameter or member 'rcd' not described in 'receive_interrupt_common'
drivers/infiniband/hw/hfi1/chip.c:8491: warning: Function parameter or member 'napi' not described in 'hfi1_netdev_rx_napi'
drivers/infiniband/hw/hfi1/chip.c:8491: warning: Function parameter or member 'budget' not described in 'hfi1_netdev_rx_napi'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'dd' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'first_ctxt' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'last_ctxt' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14399: warning: Function parameter or member 'dd' not described in 'init_qos'
drivers/infiniband/hw/hfi1/chip.c:14399: warning: Function parameter or member 'rmt' not described in 'init_qos'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Function parameter or member 'dd' not described in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Excess function parameter 'dev' description in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Excess function parameter 'ent' description in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'ppd' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'srate_mbs' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'dw_len' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Excess function parameter 'srate' description in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Excess function parameter 'dwlen' description in 'create_pbc'
Link: https://lore.kernel.org/r/20210121094519.2044049-16-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_rc.c:216: warning: Function parameter or member 'flags' not described in 'qib_make_rc_req'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'aeth' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'val' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'rcd' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1274: warning: Function parameter or member 'rcd' not described in 'qib_rc_rcv_resp'
drivers/infiniband/hw/qib/qib_rc.c:1497: warning: Function parameter or member 'rcd' not described in 'qib_rc_rcv_error'
Link: https://lore.kernel.org/r/20210121094519.2044049-15-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/cq.c:381: warning: Function parameter or member 'cqe' not described in 'rvt_resize_cq'
drivers/infiniband/sw/rdmavt/cq.c:381: warning: Function parameter or member 'udata' not described in 'rvt_resize_cq'
Link: https://lore.kernel.org/r/20210121094519.2044049-14-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_qp.c:214: warning: Function parameter or member 'rdi' not described in 'qib_free_all_qps'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'qp' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'wqe' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'call_send' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:425: warning: Function parameter or member 's' not described in 'qib_qp_iter_print'
drivers/infiniband/hw/qib/qib_qp.c:425: warning: Function parameter or member 'iter' not described in 'qib_qp_iter_print'
Link: https://lore.kernel.org/r/20210121094519.2044049-13-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_pcie.c:190: warning: Function parameter or member 'dd' not described in 'qib_cache_msi_info'
drivers/infiniband/hw/qib/qib_pcie.c:190: warning: Function parameter or member 'pos' not described in 'qib_cache_msi_info'
Link: https://lore.kernel.org/r/20210121094519.2044049-12-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'msg' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'msgl' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'hwmsg' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'hwerrs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'hwerrmsgs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'nhwerrmsgs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'msg' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'msgl' not described in 'qib_format_hwerrors'
Link: https://lore.kernel.org/r/20210121094519.2044049-11-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_mad.c:896: warning: Function parameter or member 'ppd' not described in 'rm_pkey'
drivers/infiniband/hw/qib/qib_mad.c:896: warning: Excess function parameter 'dd' description in 'rm_pkey'
drivers/infiniband/hw/qib/qib_mad.c:926: warning: Function parameter or member 'ppd' not described in 'add_pkey'
drivers/infiniband/hw/qib/qib_mad.c:926: warning: Excess function parameter 'dd' description in 'add_pkey'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'in' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out_mad_size' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out_mad_pkey_index' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Excess function parameter 'in_mad' description in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Excess function parameter 'out_mad' description in 'qib_process_mad'
Link: https://lore.kernel.org/r/20210121094519.2044049-10-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_eeprom.c:55: warning: Function parameter or member 'buff' not described in 'qib_eeprom_read'
drivers/infiniband/hw/qib/qib_eeprom.c:55: warning: Excess function parameter 'buffer' description in 'qib_eeprom_read'
drivers/infiniband/hw/qib/qib_eeprom.c:102: warning: Function parameter or member 'buff' not described in 'qib_eeprom_write'
drivers/infiniband/hw/qib/qib_eeprom.c:102: warning: Excess function parameter 'buffer' description in 'qib_eeprom_write'
Link: https://lore.kernel.org/r/20210121094519.2044049-9-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/vt.c:300: warning: Function parameter or member 'context' not described in 'rvt_dealloc_ucontext'
Link: https://lore.kernel.org/r/20210121094519.2044049-8-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_driver.c:165: warning: Function parameter or member 'ppd' not described in 'qib_wait_linkstate'
drivers/infiniband/hw/qib/qib_driver.c:165: warning: Excess function parameter 'dd' description in 'qib_wait_linkstate'
Link: https://lore.kernel.org/r/20210121094519.2044049-7-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Intel <ibsupport@intel.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hns/hns_roce_mr.c:1003: warning: Function parameter or member 'hr_dev' not described in 'hns_roce_mtr_create'
Link: https://lore.kernel.org/r/20210121094519.2044049-6-lee.jones@linaro.org
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Weihang Li <liweihang@huawei.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1398: warning: Function parameter or member 'dereset' not described in 'hns_roce_v1_reset'
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1398: warning: Excess function parameter 'enable' description in 'hns_roce_v1_reset'
Link: https://lore.kernel.org/r/20210121094519.2044049-5-lee.jones@linaro.org
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Weihang Li <liweihang@huawei.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Wei Hu <xavier.huwei@huawei.com>
Cc: Nenglong Zhao <zhaonenglong@hisilicon.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/efa/efa_com.c:801: warning: Excess function parameter 'note' description in 'efa_com_admin_q_comp_intr_handler'
Link: https://lore.kernel.org/r/20210121094519.2044049-4-lee.jones@linaro.org
Cc: Gal Pressman <galpress@amazon.com>
Cc: Yossi Leybovich <sleybo@amazon.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/mlx5/qp.c:5384: warning: Function parameter or member 'qp' not described in 'mlx5_ib_qp_set_counter'
drivers/infiniband/hw/mlx5/qp.c:5384: warning: Function parameter or member 'counter' not described in 'mlx5_ib_qp_set_counter'
Link: https://lore.kernel.org/r/20210121094519.2044049-3-lee.jones@linaro.org
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'dev' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'pfault' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'wqe' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'wqe_end' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'bytes_mapped' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'total_wqe_bytes' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'receive_queue' not described in 'pagefault_data_segments'
Link: https://lore.kernel.org/r/20210121094519.2044049-2-lee.jones@linaro.org
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An INI QP doesn't require receive CQ, the creation flow sets the recv counts
to zero:
if (cmd->qp_type == IB_QPT_XRC_INI) {
cmd->max_recv_wr = 0;
cmd->max_recv_sge = 0;
The new IOCTL path also does not set the rcq, so make things the same.
Link: https://lore.kernel.org/r/20201216071755.149449-1-yangx.jy@cn.fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the new driver method 'reg_user_mr_dmabuf'. Utilize the core
functions to import dma-buf based memory region and update the mappings.
Add code to handle dma-buf related page fault.
Link: https://lore.kernel.org/r/1608067636-98073-5-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement a new uverbs ioctl method for memory registration with file
descriptor as an extra parameter.
Link: https://lore.kernel.org/r/1608067636-98073-4-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dma-buf based memory region requires one extra parameter and is processed
quite differently. Adding a separate method allows clean separation from
regular memory regions.
Link: https://lore.kernel.org/r/1608067636-98073-3-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dma-buf is a standard cross-driver buffer sharing mechanism that can be
used to support peer-to-peer access from RDMA devices.
Device memory exported via dma-buf is associated with a file descriptor.
This is passed to the user space as a property associated with the buffer
allocation. When the buffer is registered as a memory region, the file
descriptor is passed to the RDMA driver along with other parameters.
Implement the common code for importing dma-buf object and mapping dma-buf
pages.
Link: https://lore.kernel.org/r/1608067636-98073-2-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This reverts commit b2d2440430.
It's true that creating rxe on top of 802.1q interfaces doesn't work.
Thus, commit fd49ddaf7e ("RDMA/rxe: prevent rxe creation on top of vlan
interface") was absolutely correct.
But b2d2440430 was incorrect assuming that with this change, RDMA and
VLAN don't work togehter at all. It just has to be set up
differently. Rather than creating rxe on top of the VLAN interface, rxe
must be created on top of the physical interface. RDMA then works just
fine through VLAN interfaces on top of that physical interface, via the
"upper device" logic.
This is hard to see in the rxe logic because it never talks about vlan,
but instead rxe carefully selects upper vlan netdevices when working with
packets which in turn imply certain vlan tagging. This is all done
correctly and interacts with the gid table with VLAN support the same as
real HW does.
b2d2440430 broke this setup deliberately and should thus be
reverted. Also, b2d2440430 removed rxe_dma_device(), so adapt the revert
to discard that hunk.
Fixes: b2d2440430 ("RDMA/rxe: Remove VLAN code leftovers from RXE")
Link: https://lore.kernel.org/r/20210120161913.7347-1-mwilck@suse.com
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/iwpm_msg.c:402: warning: Function parameter or member 'skb' not described in 'iwpm_register_pid_cb'
drivers/infiniband/core/iwpm_msg.c:475: warning: Function parameter or member 'skb' not described in 'iwpm_add_mapping_cb'
drivers/infiniband/core/iwpm_msg.c:553: warning: Function parameter or member 'skb' not described in 'iwpm_add_and_query_mapping_cb'
drivers/infiniband/core/iwpm_msg.c:636: warning: Function parameter or member 'skb' not described in 'iwpm_remote_info_cb'
drivers/infiniband/core/iwpm_msg.c:716: warning: Function parameter or member 'skb' not described in 'iwpm_mapping_info_cb'
drivers/infiniband/core/iwpm_msg.c:773: warning: Function parameter or member 'skb' not described in 'iwpm_ack_mapping_info_cb'
drivers/infiniband/core/iwpm_msg.c:803: warning: Function parameter or member 'skb' not described in 'iwpm_mapping_error_cb'
drivers/infiniband/core/iwpm_msg.c:851: warning: Function parameter or member 'skb' not described in 'iwpm_hello_cb'
Link: https://lore.kernel.org/r/20210118223929.512175-21-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/iwpm_util.c:138: warning: Function parameter or member 'local_sockaddr' not described in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Function parameter or member 'mapped_sockaddr' not described in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Excess function parameter 'local_addr' description in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Excess function parameter 'mapped_addr' description in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:185: warning: Function parameter or member 'local_sockaddr' not described in 'iwpm_remove_mapinfo'
drivers/infiniband/core/iwpm_util.c:185: warning: Excess function parameter 'local_addr' description in 'iwpm_remove_mapinfo'
Link: https://lore.kernel.org/r/20210118223929.512175-20-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'dev' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'port' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'on' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'mask' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:238: warning: Function parameter or member 'qp' not described in 'rdma_get_counter_auto_mode'
drivers/infiniband/core/counters.c:238: warning: Function parameter or member 'port' not described in 'rdma_get_counter_auto_mode'
drivers/infiniband/core/counters.c:282: warning: Function parameter or member 'qp' not described in 'rdma_counter_bind_qp_auto'
drivers/infiniband/core/counters.c:282: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qp_auto'
drivers/infiniband/core/counters.c:320: warning: Function parameter or member 'qp' not described in 'rdma_counter_unbind_qp'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'dev' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'port' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'index' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'dev' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'dev' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'dev' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'port' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_unbind_qpn'
Link: https://lore.kernel.org/r/20210118223929.512175-19-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_verbs.c:273: warning: Excess function parameter 'iwdev' description in 'i40iw_free_qp_resources'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:273: warning: Excess function parameter 'qp_num' description in 'i40iw_free_qp_resources'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:307: warning: Function parameter or member 'udata' not described in 'i40iw_destroy_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Function parameter or member 'iwdev' not described in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Function parameter or member 'iwqp' not described in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Excess function parameter 'dev' description in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Excess function parameter 'qp' description in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1248: warning: Function parameter or member 'pg_size' not described in 'i40iw_check_mem_contiguous'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1264: warning: Function parameter or member 'pg_size' not described in 'i40iw_check_mr_contiguous'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1539: warning: Function parameter or member 'sg_offset' not described in 'i40iw_map_mr_sg'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1886: warning: Function parameter or member 'udata' not described in 'i40iw_dereg_mr'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'dev' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'attr' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'buf' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'dev' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'attr' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'buf' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'dev' not described in 'board_id_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'attr' not described in 'board_id_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'buf' not described in 'board_id_show'
Link: https://lore.kernel.org/r/20210118223929.512175-18-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/restrack.c:209: warning: Function parameter or member 'res' not described in 'rdma_restrack_new'
drivers/infiniband/core/restrack.c:209: warning: Function parameter or member 'type' not described in 'rdma_restrack_new'
Link: https://lore.kernel.org/r/20210118223929.512175-17-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_utils.c:66: warning: Function parameter or member 'ipv4' not described in 'i40iw_arp_table'
drivers/infiniband/hw/i40iw/i40iw_utils.c:148: warning: Function parameter or member 'notifier' not described in 'i40iw_inetaddr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:148: warning: Excess function parameter 'notfier' description in 'i40iw_inetaddr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:224: warning: Function parameter or member 'notifier' not described in 'i40iw_inet6addr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:224: warning: Excess function parameter 'notfier' description in 'i40iw_inet6addr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:273: warning: Function parameter or member 'notifier' not described in 'i40iw_net_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:273: warning: Excess function parameter 'notfier' description in 'i40iw_net_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:320: warning: Function parameter or member 'notifier' not described in 'i40iw_netdevice_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:320: warning: Excess function parameter 'notfier' description in 'i40iw_netdevice_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:663: warning: Function parameter or member 'desc' not described in 'i40iw_debug_buf'
drivers/infiniband/hw/i40iw/i40iw_utils.c:792: warning: Function parameter or member 'sdinfo' not described in 'i40iw_cqp_sds_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:792: warning: Excess function parameter 'sd_info' description in 'i40iw_cqp_sds_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:895: warning: Function parameter or member 't' not described in 'i40iw_terminate_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:895: warning: Excess function parameter 'context' description in 'i40iw_terminate_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:953: warning: Function parameter or member 'dev' not described in 'i40iw_cqp_spawn_worker'
drivers/infiniband/hw/i40iw/i40iw_utils.c:953: warning: Excess function parameter 'iwdev' description in 'i40iw_cqp_spawn_worker'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1058: warning: Function parameter or member 'dev' not described in 'i40iw_cqp_query_fpm_values_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1058: warning: Excess function parameter 'iwdev' description in 'i40iw_cqp_query_fpm_values_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1120: warning: Function parameter or member 'dev' not described in 'i40iw_vf_wait_vchnl_resp'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1120: warning: Excess function parameter 'iwdev' description in 'i40iw_vf_wait_vchnl_resp'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1467: warning: Function parameter or member 't' not described in 'i40iw_hw_stats_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1467: warning: Excess function parameter 'vsi' description in 'i40iw_hw_stats_timeout'
Link: https://lore.kernel.org/r/20210118223929.512175-16-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'rsrc_type' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'start_index' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'rsrc_count' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'rsrc_type' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'start_index' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'rsrc_count' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:230: warning: Function parameter or member 'hmc_fcn' not described in 'vchnl_pf_send_get_hmc_fcn_resp'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:283: warning: Function parameter or member 'op_ret_code' not described in 'vchnl_pf_send_error_resp'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'dev' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'callback_param' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'cqe_info' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Excess function parameter 'cqp_req_param' description in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Excess function parameter 'not_used' description in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:337: warning: Function parameter or member 'work_vf_dev' not described in 'pf_add_hmc_obj_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:337: warning: Excess function parameter 'vf_dev' description in 'pf_add_hmc_obj_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:412: warning: Function parameter or member 'dev' not described in 'i40iw_vf_init_pestat'
Link: https://lore.kernel.org/r/20210118223929.512175-15-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_uk.c:129: warning: Function parameter or member 'total_size' not described in 'i40iw_qp_get_next_send_wqe'
drivers/infiniband/hw/i40iw/i40iw_uk.c:129: warning: Function parameter or member 'wr_id' not described in 'i40iw_qp_get_next_send_wqe'
drivers/infiniband/hw/i40iw/i40iw_uk.c:724: warning: Excess function parameter 'post_cq' description in 'i40iw_cq_poll_completion'
drivers/infiniband/hw/i40iw/i40iw_uk.c:1058: warning: Function parameter or member 'queue' not described in 'i40iw_clean_cq'
Link: https://lore.kernel.org/r/20210118223929.512175-14-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'client' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'sa_dev' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'device' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'port_num' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'rec' not described in 'opa_pr_query_possible'
Link: https://lore.kernel.org/r/20210118223929.512175-13-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/multicast.c:739: warning: Function parameter or member 'rec' not described in 'ib_init_ah_from_mcmember'
Link: https://lore.kernel.org/r/20210118223929.512175-12-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_puda.c:517: warning: Function parameter or member 'dev' not described in 'i40iw_puda_qp_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:517: warning: Function parameter or member 'qp' not described in 'i40iw_puda_qp_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:517: warning: Excess function parameter 'rsrc' description in 'i40iw_puda_qp_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:629: warning: Function parameter or member 'dev' not described in 'i40iw_puda_cq_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:629: warning: Function parameter or member 'cq' not described in 'i40iw_puda_cq_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:629: warning: Excess function parameter 'rsrc' description in 'i40iw_puda_cq_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:792: warning: Function parameter or member 'vsi' not described in 'i40iw_puda_dele_resources'
drivers/infiniband/hw/i40iw/i40iw_puda.c:792: warning: Excess function parameter 'dev' description in 'i40iw_puda_dele_resources'
drivers/infiniband/hw/i40iw/i40iw_puda.c:884: warning: Function parameter or member 'vsi' not described in 'i40iw_puda_create_rsrc'
drivers/infiniband/hw/i40iw/i40iw_puda.c:884: warning: Excess function parameter 'dev' description in 'i40iw_puda_create_rsrc'
drivers/infiniband/hw/i40iw/i40iw_puda.c:1135: warning: Function parameter or member 'pfpdu' not described in 'i40iw_ieq_create_pbufl'
drivers/infiniband/hw/i40iw/i40iw_puda.c:1442: warning: Function parameter or member 'vsi' not described in 'i40iw_ieq_receive'
drivers/infiniband/hw/i40iw/i40iw_puda.c:1442: warning: Excess function parameter 'dev' description in 'i40iw_ieq_receive'
Link: https://lore.kernel.org/r/20210118223929.512175-11-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_pble.c:60: warning: Function parameter or member 'dev' not described in 'i40iw_destroy_pble_pool'
drivers/infiniband/hw/i40iw/i40iw_pble.c:120: warning: Function parameter or member 'pble_rsrc' not described in 'get_sd_pd_idx'
drivers/infiniband/hw/i40iw/i40iw_pble.c:120: warning: Function parameter or member 'idx' not described in 'get_sd_pd_idx'
Link: https://lore.kernel.org/r/20210118223929.512175-10-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/roce_gid_mgmt.c:511: warning: Function parameter or member 'ib_dev' not described in 'rdma_roce_rescan_device'
drivers/infiniband/core/roce_gid_mgmt.c:511: warning: Excess function parameter 'device' description in 'rdma_roce_rescan_device'
Link: https://lore.kernel.org/r/20210118223929.512175-9-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_main.c:192: warning: Function parameter or member 't' not described in 'i40iw_dpc'
drivers/infiniband/hw/i40iw/i40iw_main.c:192: warning: Excess function parameter 'data' description in 'i40iw_dpc'
drivers/infiniband/hw/i40iw/i40iw_main.c:206: warning: Function parameter or member 't' not described in 'i40iw_ceq_dpc'
drivers/infiniband/hw/i40iw/i40iw_main.c:206: warning: Excess function parameter 'data' description in 'i40iw_ceq_dpc'
drivers/infiniband/hw/i40iw/i40iw_main.c:236: warning: Function parameter or member 'free_hwcqp' not described in 'i40iw_destroy_cqp'
drivers/infiniband/hw/i40iw/i40iw_main.c:236: warning: Excess function parameter 'create_done' description in 'i40iw_destroy_cqp'
drivers/infiniband/hw/i40iw/i40iw_main.c:264: warning: Function parameter or member 'msix_vec' not described in 'i40iw_disable_irq'
drivers/infiniband/hw/i40iw/i40iw_main.c:264: warning: Excess function parameter 'msic_vec' description in 'i40iw_disable_irq'
drivers/infiniband/hw/i40iw/i40iw_main.c:407: warning: Function parameter or member 'dev' not described in 'i40iw_close_hmc_objects_type'
drivers/infiniband/hw/i40iw/i40iw_main.c:407: warning: Function parameter or member 'hmc_info' not described in 'i40iw_close_hmc_objects_type'
drivers/infiniband/hw/i40iw/i40iw_main.c:407: warning: Excess function parameter 'iwdev' description in 'i40iw_close_hmc_objects_type'
drivers/infiniband/hw/i40iw/i40iw_main.c:443: warning: Function parameter or member 'irq' not described in 'i40iw_ceq_handler'
drivers/infiniband/hw/i40iw/i40iw_main.c:1786: warning: Function parameter or member 'reset' not described in 'i40iw_close'
Link: https://lore.kernel.org/r/20210118223929.512175-8-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Intel Corporation <e1000-rdma@lists.sourceforge.net>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_hw.c:172: warning: Function parameter or member 'iwcq' not described in 'i40iw_iwarp_ce_handler'
drivers/infiniband/hw/i40iw/i40iw_hw.c:172: warning: Excess function parameter 'iwcp' description in 'i40iw_iwarp_ce_handler'
drivers/infiniband/hw/i40iw/i40iw_hw.c:529: warning: Function parameter or member 'ipv4' not described in 'i40iw_manage_arp_cache'
drivers/infiniband/hw/i40iw/i40iw_hw.c:592: warning: Excess function parameter 'user_pri' description in 'i40iw_manage_qhash'
Link: https://lore.kernel.org/r/20210118223929.512175-7-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/cache.c:688: warning: Function parameter or member 'ib_dev' not described in 'rdma_find_gid_by_port'
drivers/infiniband/core/cache.c:688: warning: Function parameter or member 'port' not described in 'rdma_find_gid_by_port'
drivers/infiniband/core/cache.c:688: warning: Excess function parameter 'device' description in 'rdma_find_gid_by_port'
drivers/infiniband/core/cache.c:688: warning: Excess function parameter 'port_num' description in 'rdma_find_gid_by_port'
drivers/infiniband/core/cache.c:741: warning: Function parameter or member 'ib_dev' not described in 'rdma_find_gid_by_filter'
drivers/infiniband/core/cache.c:741: warning: Function parameter or member 'context' not described in 'rdma_find_gid_by_filter'
drivers/infiniband/core/cache.c:741: warning: Excess function parameter 'device' description in 'rdma_find_gid_by_filter'
drivers/infiniband/core/cache.c:1263: warning: Excess function parameter 'num_entries' description in 'rdma_query_gid_table'
Link: https://lore.kernel.org/r/20210118223929.512175-6-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_cm.c:76: warning: Function parameter or member 'bufp' not described in 'i40iw_free_sqbuf'
drivers/infiniband/hw/i40iw/i40iw_cm.c:76: warning: Excess function parameter 'buf' description in 'i40iw_free_sqbuf'
drivers/infiniband/hw/i40iw/i40iw_cm.c:737: warning: Function parameter or member 'start_addr' not described in 'i40iw_build_mpa_v1'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1059: warning: Function parameter or member 'cm_node' not described in 'i40iw_schedule_cm_timer'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1211: warning: Function parameter or member 't' not described in 'i40iw_cm_timer_tick'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1211: warning: Excess function parameter 'pass' description in 'i40iw_cm_timer_tick'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1475: warning: Function parameter or member 'vlan_id' not described in 'i40iw_find_listener'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1527: warning: Function parameter or member 'port' not described in 'i40iw_find_port'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1527: warning: Excess function parameter 'accelerated_list' description in 'i40iw_find_port'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1843: warning: Function parameter or member 'listener' not described in 'i40iw_dec_refcnt_listen'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2037: warning: Function parameter or member 'src_addr' not described in 'i40iw_get_dst_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2037: warning: Function parameter or member 'dst_addr' not described in 'i40iw_get_dst_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2061: warning: Function parameter or member 'src' not described in 'i40iw_addr_resolve_neigh_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2061: warning: Function parameter or member 'dest' not described in 'i40iw_addr_resolve_neigh_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2061: warning: Excess function parameter 'dst_ip' description in 'i40iw_addr_resolve_neigh_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:3011: warning: Function parameter or member 'pdata' not described in 'i40iw_cm_reject'
drivers/infiniband/hw/i40iw/i40iw_cm.c:3011: warning: Excess function parameter 'pdate' description in 'i40iw_cm_reject'
drivers/infiniband/hw/i40iw/i40iw_cm.c:4312: warning: Function parameter or member 'nfo' not described in 'i40iw_cm_teardown_connections'
drivers/infiniband/hw/i40iw/i40iw_cm.c:4312: warning: Excess function parameter 'ipv4' description in 'i40iw_cm_teardown_connections'
drivers/infiniband/hw/i40iw/i40iw_cm.c:4367: warning: Function parameter or member 'netdev' not described in 'i40iw_if_notify'
Link: https://lore.kernel.org/r/20210118223929.512175-5-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:193: warning: Function parameter or member 'obj_info' not described in 'i40iw_sc_decode_fpm_query'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:193: warning: Excess function parameter 'info' description in 'i40iw_sc_decode_fpm_query'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:218: warning: Function parameter or member 'hmc_info' not described in 'i40iw_sc_parse_fpm_query_buf'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:218: warning: Excess function parameter 'info' description in 'i40iw_sc_parse_fpm_query_buf'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:784: warning: Function parameter or member 'compl_info' not described in 'i40iw_sc_poll_for_cqp_op_done'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:784: warning: Excess function parameter 'info' description in 'i40iw_sc_poll_for_cqp_op_done'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:947: warning: Function parameter or member 'commit_fpm_mem' not described in 'i40iw_sc_commit_fpm_values'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:1032: warning: Function parameter or member 'dev' not described in 'i40iw_get_rdma_features'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:1468: warning: Function parameter or member 'ignore_ref_count' not described in 'i40iw_sc_del_local_mac_ipaddr_entry'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:2314: warning: Function parameter or member 'scratch' not described in 'i40iw_sc_cq_modify'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:3682: warning: Function parameter or member 'info' not described in 'cqp_sds_wqe_fill'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:4894: warning: Function parameter or member 'stats' not described in 'i40iw_hw_stats_read_32'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:4894: warning: Excess function parameter 'stat' description in 'i40iw_hw_stats_read_32'
Link: https://lore.kernel.org/r/20210118223929.512175-4-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'ibdev' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'client_name' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'res' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:2328: warning: Function parameter or member 'nldev_cb' not described in 'ib_enum_all_devs'
drivers/infiniband/core/device.c:2328: warning: Function parameter or member 'skb' not described in 'ib_enum_all_devs'
Link: https://lore.kernel.org/r/20210118223929.512175-3-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_hmc.c:64: warning: Function parameter or member 'idx' not described in 'i40iw_find_sd_index_limit'
drivers/infiniband/hw/i40iw/i40iw_hmc.c:64: warning: Excess function parameter 'index' description in 'i40iw_find_sd_index_limit'
drivers/infiniband/hw/i40iw/i40iw_hmc.c:94: warning: Function parameter or member 'pd_idx' not described in 'i40iw_find_pd_index_limit'
drivers/infiniband/hw/i40iw/i40iw_hmc.c:94: warning: Excess function parameter 'pd_index' description in 'i40iw_find_pd_index_limit'
Link: https://lore.kernel.org/r/20210118223929.512175-2-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In commit e28bf1f03b ("RDMA: Convert various random sprintf sysfs _show
uses to sysfs_emit") I mistakenly used len = sysfs_emit_at to overwrite
the last trailing space of potentially multiple entry output.
Instead use a more common style by removing the trailing space from the
output formats and adding a prefixing space to the contination formats and
converting the final terminating output newline from the defective
len = sysfs_emit_at(buf, len, "\n");
to the now appropriate and typical
len += sysfs_emit_at(buf, len, "\n");
Fixes: e28bf1f03b ("RDMA: Convert various random sprintf sysfs _show uses to sysfs_emit")
Link: https://lore.kernel.org/r/5eb794b9c9bca0494d94b2b209f1627fa4e7b555.camel@perches.com
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This reverts commit fbdd0049d9.
Due to commit in fixes tag, netdevice events were received only in one net
namespace of mlx5_core_dev. Due to this when netdevice events arrive in
net namespace other than net namespace of mlx5_core_dev, they are missed.
This results in empty GID table due to RDMA device being detached from its
net device.
Hence, revert back to receive netdevice events in all net namespaces to
restore back RDMA functionality in non init_net net namespace. The
deadlock will have to be addressed in another patch.
Fixes: fbdd0049d9 ("RDMA/mlx5: Fix devlink deadlock on net namespace deletion")
Link: https://lore.kernel.org/r/20210117092633.10690-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GFP_KERNEL may cause ida_alloc_range() to sleep, but the spinlock covering
this function is not allowed to sleep, so the spinlock needs to be changed
to mutex.
As there is a certain chance of memory allocation failure, GFP_ATOMIC is
not suitable for QP allocation scenarios.
Fixes: 71586dd200 ("RDMA/hns: Create QP with selected QPN for bank load balance")
Link: https://lore.kernel.org/r/1611048513-28663-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The PVRDMA device HW interface defines network_hdr_type according to an
old definition of the internal kernel rdma_network_type enum that has
since changed, resulting in the wrong rdma_network_type being reported.
Fix this by explicitly defining the enum used by the PVRDMA device and
adding a function to convert the pvrdma_network_type to rdma_network_type
enum.
Cc: stable@vger.kernel.org # 5.10+
Fixes: 1c15b4f2a4 ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Link: https://lore.kernel.org/r/1611026189-17943-1-git-send-email-bryantan@vmware.com
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_query_mad_ifc_smp_attr_node_info() is internal to mad.c Hence, make
it static.
Link: https://lore.kernel.org/r/20210113121703.559778-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reduce the number of instructions made for setting protection caps. No
need to do bitwise OR with 0 since we can zero the return value in the
beginning of the function.
Link: https://lore.kernel.org/r/20210111145754.56727-5-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove the check from the module_init function.
Link: https://lore.kernel.org/r/20210111145754.56727-3-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No need to add semicolon after closing bracket.
Link: https://lore.kernel.org/r/20210111145754.56727-2-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
Be more strict with DEVX get/set operations for the obj_id.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'devx_set_get':
RDMA/mlx5: Use strict get/set operations for obj_id
RDMA/mlx5: Use the correct obj_id upon DEVX TIR creation
net/mlx5: Expose ifc bits for query modify header
Use strict get/set operations for obj_id based on the specific object
type. This comes to prevent any miss match between the general header to
the legacy header commands.
Link: https://lore.kernel.org/r/20201230130121.180350-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the correct obj_id upon DEVX TIR creation by strictly taking the tirn
24 bits and not the general obj_id which is 32 bits.
Fixes: 7efce3691d ("IB/mlx5: Add obj create and destroy functionality")
Link: https://lore.kernel.org/r/20201230130121.180350-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The max_recv_sge value is wrongly reported when calling query_qp, This is
happening due to a typo when assigning the max_recv_sge value, the value
of sq_max_sges was assigned instead of rq_max_sges.
Fixes: 3e5c02c9ef ("iw_cxgb4: Support query_qp() verb")
Link: https://lore.kernel.org/r/20210114191423.423529-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use if/else clause instead of "condition ? val1 : val2" to make the code
cleaner and simpler.
Link: https://lore.kernel.org/r/20210110111903.486681-3-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No need to add semicolon after closing bracket.
Link: https://lore.kernel.org/r/20210110111903.486681-2-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The Linux convention is to have only 1 new line between functions.
Link: https://lore.kernel.org/r/20210110111903.486681-1-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow users to create bigger MRs. Remove the check that prevented creating
MRs with number of pages more than 512.
Link: https://lore.kernel.org/r/1610012608-14528-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor code that populates MR page buffer list. Instead of allocating a
pbl_tbl to hold the buffer list, pass the struct ib_umem directly to
bnxt_qplib_alloc_init_hwq() as done for other user space memories. Fix
the PBL level to handle the above mentioned change.
Also, remove an unwanted flag from the input to bnxt_qplib_reg_mr()
function.
Link: https://lore.kernel.org/r/1610012608-14528-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to improve performance by balancing the load between different
banks of cache, the CQC cache is desigend to choose one of 4 banks
according to lower 2 bits of CQN. The hns driver needs to count the number
of CQ on each bank and then assigns the CQ being created to the bank with
the minimum load first.
Link: https://lore.kernel.org/r/1610008589-35770-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bounded counter can't be reconfigured to be in auto mode, in attempt
to do it, the user will get an error, but without any hint why. Update
nldev interface to return an error message through extack mechanism.
Link: https://lore.kernel.org/r/20201230130240.180737-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix up wr_avail accounting. if wr_cnt is 0, then we do SIGNAL for first
wr, in completion we add queue_depth back, which is not right in the
sense of tracking for available wr.
So fix it by init wr_cnt to 1.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-19-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We do not need to wait for REG_MR completion, so remove the
SIGNAL flag.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-18-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We may want to add new flags, so it's better to use bitmask to check flags.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-17-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For HB, there is no need to generate signal for completion.
Also remove a comment accordingly.
Fixes: c0894b3ea6 ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20201217141915.56989-16-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reported-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make all failure cases go to the common path to avoid duplicate code.
And some issued existed before.
1. clt need to be freed to avoid memory leak.
2. return ERR_PTR(-ENOMEM) if kobject_create_and_add fails, because
rtrs_clt_open checks the return value of by call "IS_ERR(clt)".
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-15-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We had a few places wr_cqe is not set, which could lead to NULL pointer
deref or GPF in error case.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-14-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Let's rename it to rtrs_clt_change_state since the previous one is
killed.
Also update the comment to make it more clear.
Link: https://lore.kernel.org/r/20201217141915.56989-13-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is just a wrapper of rtrs_clt_change_state_get_old, and we can reuse
rtrs_clt_change_state_get_old with add the checking of 'old_state' is
valid or not.
Link: https://lore.kernel.org/r/20201217141915.56989-12-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is not needed since the label is just after the place.
Link: https://lore.kernel.org/r/20201217141915.56989-11-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Let's wait the inflight permits before free it.
Link: https://lore.kernel.org/r/20201217141915.56989-10-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the two functions are called together, let's consolidate them in
a new function rtrs_clt_destroy_sysfs_root.
Link: https://lore.kernel.org/r/20201217141915.56989-9-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Per the comment of kobject_init_and_add, we need to free the memory
by call kobject_put.
Fixes: 215378b838 ("RDMA/rtrs: client: sysfs interface functions")
Fixes: 91b11610af ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20201217141915.56989-8-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rtrs_iu_free is called in rtrs_iu_alloc if memory is limited, so we
don't need to free the same iu again.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-7-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently rtrs when create_qp use a coarse numbers (bigger in general),
which leads to hardware create more resources which only waste memory
with no benefits.
- SERVICE con,
For max_send_wr/max_recv_wr, it's 2 times SERVICE_CON_QUEUE_DEPTH + 2
- IO con
For max_send_wr/max_recv_wr, it's sess->queue_depth * 3 + 1
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-6-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove self first to avoid deadlock, we don't want to
use close_work to remove sess sysfs.
Fixes: 91b11610af ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20201217141915.56989-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In this error case, we don't need hold mutex to call close_sess.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rtrs does not have same limit for both max_send_wr and max_recv_wr,
To allow client and server set different values, export in a separate
parameter for rtrs_cq_qp_create.
Also fix the type accordingly, u32 should be used instead of u16.
Fixes: c0894b3ea6 ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20201217141915.56989-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In default_roce_mode_store(), we took a reference to cma_dev, but didn't
return it with cma_dev_put in the error flow.
Fixes: 1c15b4f2a4 ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Link: https://lore.kernel.org/r/20210113130214.562108-1-leon@kernel.org
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the allocation of the fast path blue flame register fails, the driver
should free the regular blue flame register allocated a statement above,
not the one that it just failed to allocate.
Fixes: 16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Link: https://lore.kernel.org/r/20210113121703.559778-6-leon@kernel.org
Reported-by: Hans Petter Selasky <hanss@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rounddown_pow_of_two() is undefined when the input is 0. Therefore we need
to avoid it in ib_umem_find_best_pgsz and return 0. Otherwise, it could
result in not rejecting an invalid page size which eventually causes a
kernel oops due to the logical inconsistency.
Fixes: 3361c29e92 ("RDMA/umem: Use simpler logic for ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20210113121703.559778-2-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix a race in rxe_mcast.c that occurs when two QPs try at the same time to
attach a multicast address. Both QPs lookup the mgid address in a pool of
multicast groups and if they do not find it create a new group elem.
Fix this by locking the lookup/alloc/add key sequence and using the
unlocked APIs added in this patch set.
Link: https://lore.kernel.org/r/20201216231550.27224-8-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The existing pool APIs use the rw_lock pool_lock to protect critical
sections that change the pool state. This does not correctly implement a
typical sequence like the following
elem = <lookup key in pool>
if found use elem else
elem = <alloc new elem in pool>
<add key to elem>
Which is racy if multiple threads are attempting to perform this at the
same time. We want the second thread to use the elem created by the first
thread not create two equivalent elems.
This patch adds new APIs that are the same as existing APIs but do not
take the pool_lock. A caller can then take the lock and perform a sequence
of pool operations and then release the lock.
Link: https://lore.kernel.org/r/20201216231550.27224-7-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace 'void *' parameters with 'struct rxe_pool_entry *' and use a macro
to allow:
rxe_add_index,
rxe_drop_index,
rxe_add_key,
rxe_drop_key and
rxe_add_to_pool
APIs to be type safe against changing the position of pelem in the
objects.
Link: https://lore.kernel.org/r/20201216231550.27224-6-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The allocate, lookup index, lookup key and cleanup routines in rxe_pool.c
currently are not type safe against relocating the pelem field in the
objects. Planned changes to move allocation of objects into rdma-core make
addressing this a requirement.
Use the elem_offset field in rxe_type_info make these APIs safe against
moving the pelem field.
Link: https://lore.kernel.org/r/20201216231550.27224-5-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rxe verbs objects each include an rdma-core object 'ib_xxx'
and a rxe_pool_entry 'pelem' in addition to rxe specific data.
Originally these all had pelem first and ib_xxx second. Currently
about half have ib_xxx first and half have pelem first. Saving
the offset of the pelem field in rxe_type info will enable making
the rxe_pool APIs type safe as the pelem field continues to vary.
Link: https://lore.kernel.org/r/20201216231550.27224-4-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow both indices and keys to exist for objects in pools. Previously you
were limited to one or the other.
This is required for later implementing rxe memory windows.
Link: https://lore.kernel.org/r/20201216231550.27224-3-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove RXE_POOL_ATOMIC flag from rxe_type_info for AH objects. These
objects are now allocated by rdma/core so there is no further reason for
this flag.
Link: https://lore.kernel.org/r/20201216231550.27224-2-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current rdma_rxe only supports five QP types, attempting to create any
others should return an error - the type check was missed.
Link: https://lore.kernel.org/r/20201216071755.149449-2-yangx.jy@cn.fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
During connection setup, the application may choose to zero-size inbound
and outbound READ queues, as well as the Receive queue. This patch fixes
handling of zero-sized queues, but not prevents it.
Kamal Heib says in an initial error report:
When running the blktests over siw the following shift-out-of-bounds is
reported, this is happening because the passed IRD or ORD from the ulp
could be zero which will lead to unexpected behavior when calling
roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD.
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S 5.10.0-rc6 #2
Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
dump_stack+0x99/0xcb
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3
? down_write+0x183/0x3d0
siw_qp_modify.cold.8+0x2d/0x32 [siw]
? __local_bh_enable_ip+0xa5/0xf0
siw_accept+0x906/0x1b60 [siw]
? xa_load+0x147/0x1f0
? siw_connect+0x17a0/0x17a0 [siw]
? lock_downgrade+0x700/0x700
? siw_get_base_qp+0x1c2/0x340 [siw]
? _raw_spin_unlock_irqrestore+0x39/0x40
iw_cm_accept+0x1f4/0x430 [iw_cm]
rdma_accept+0x3fa/0xb10 [rdma_cm]
? check_flush_dependency+0x410/0x410
? cma_rep_recv+0x570/0x570 [rdma_cm]
nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma]
? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma]
? lock_release+0x56e/0xcc0
? lock_downgrade+0x700/0x700
? lock_downgrade+0x700/0x700
? __xa_alloc_cyclic+0xef/0x350
? __xa_alloc+0x2d0/0x2d0
? rdma_restrack_add+0xbe/0x2c0 [ib_core]
? __ww_mutex_die+0x190/0x190
cma_cm_event_handler+0xf2/0x500 [rdma_cm]
iw_conn_req_handler+0x910/0xcb0 [rdma_cm]
? _raw_spin_unlock_irqrestore+0x39/0x40
? trace_hardirqs_on+0x1c/0x150
? cma_ib_handler+0x8a0/0x8a0 [rdma_cm]
? __kasan_kmalloc.constprop.7+0xc1/0xd0
cm_work_handler+0x121c/0x17a0 [iw_cm]
? iw_cm_reject+0x190/0x190 [iw_cm]
? trace_hardirqs_on+0x1c/0x150
process_one_work+0x8fb/0x16c0
? pwq_dec_nr_in_flight+0x320/0x320
worker_thread+0x87/0xb40
? __kthread_parkme+0xd1/0x1a0
? process_one_work+0x16c0/0x16c0
kthread+0x35f/0x430
? kthread_mod_delayed_work+0x180/0x180
ret_from_fork+0x22/0x30
Fixes: a531975279 ("rdma/siw: main include file")
Fixes: f29dd55b02 ("rdma/siw: queue pair methods")
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Fixes: b9be6f18cf ("rdma/siw: transmit path")
Fixes: 303ae1cdfd ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/20210108125845.1803-1-bmt@zurich.ibm.com
Reported-by: Kamal Heib <kamalheib1@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In ocrdma_dealloc_ucontext_pd() uctx->cntxt_pd is assigned to the variable
pd and then after uctx->cntxt_pd is freed, the variable pd is passed to
function _ocrdma_dealloc_pd() which dereferences pd directly or through
its call to ocrdma_mbx_dealloc_pd().
Reorder the free using the variable pd.
Cc: stable@vger.kernel.org
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20201230024653.1516495-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If usnic_ib_qp_grp_create() fails at the first call, dev_list
will not be freed on error, which leads to memleak.
Fixes: e3cf00d0a8 ("IB/usnic: Add Cisco VIC low-level hardware driver")
Link: https://lore.kernel.org/r/20201226074248.2893-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The parameter of kfree function is NULL, so kfree code is useless, delete
it. Therefore, goto expression is no longer needed, so simplify
it. cma_dev_group is always pre-zero'd before reaching make_cma_ports, so
the NULL set to cma_dev_group->ports is unneeded too.
Link: https://lore.kernel.org/r/20201216080219.18184-1-zhengyongjun3@huawei.com
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
See Documentation/core-api/printk-formats.rst. h should no longer be used
in the format specifier for printk.
Link: https://lore.kernel.org/r/20201215183509.2072517-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This change fixes the checkpatch warning described in
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless so
do not encourage the use of %hh[xudi] or %h[xudi].
Link: https://lore.kernel.org/r/20201223193041.122850-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
xa_alloc_cyclic() call returns positive number if ID allocation
succeeded but wrapped. It is not an error, so normalize the "ret"
variable to zero as marker of not-an-error.
drivers/infiniband/core/restrack.c:261 rdma_restrack_add()
warn: 'ret' can be either negative or positive
Fixes: fd47c2f99f ("RDMA/restrack: Convert internal DB from hash to XArray")
Link: https://lore.kernel.org/r/20201216100753.1127638-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The destruction flow is very complicated here because the cm_id can be
destroyed from the event handler at any time if the device is
hot-removed. This leaves behind a partial ctx with no cm_id in the
xarray, and will let user space leak memory.
Make everything consistent in this flow in all places:
- Return the xarray back to XA_ZERO_ENTRY before beginning any
destruction. The thread that reaches this first is responsible to
kfree, everyone else does nothing.
- Test the xarray during the special hot-removal case to block the
queue_work, this has much simpler locking and doesn't require a
'destroying'
- Fix the ref initialization so that it is only positive if cm_id !=
NULL, then rely on that to guide the destruction process in all cases.
Now the new ucma_destroy_private_ctx() can be called in all places that
want to free the ctx, including all the error unwinds, and none of the
details are missed.
Fixes: a1d33b70db ("RDMA/ucma: Rework how new connections are passed through event delivery")
Link: https://lore.kernel.org/r/20210105111327.230270-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Previously the rnbd client requested the rtrs to allocate rnbd_iu
just after the rtrs_iu. So the rnbd client passes the size of
rnbd_iu for rtrs_clt_open() and rtrs creates an array of
rnbd_iu and rtrs_iu.
For IO handling, rnbd_iu exists after the request because we pass
the size of rnbd_iu when setting the tag-set. Therefore we do not
use the rnbd_iu allocated by rtrs for IO handling.
We only use the rnbd_iu allocated by rtrs when doing session
initialization. Almost all rnbd_iu allocated by rtrs are wasted.
By this patch the rnbd client does not request rnbd_iu allocation
to rtrs but allocate it for itself when doing session initialization.
Also remove unused rtrs_permit_to_pdu from rtrs.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A smaller set of patches, nothing stands out as being particularly major
this cycle:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4,
mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions
-----BEGIN PGP SIGNATURE-----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=9t8b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
If the MR cache entry invalidation failed, then we detach this entry from
the cache, therefore we must to free the memory as well.
Allcation backtrace for the leaker:
[<00000000d8e423b0>] alloc_cache_mr+0x23/0xc0 [mlx5_ib]
[<000000001f21304c>] create_cache_mr+0x3f/0xf0 [mlx5_ib]
[<000000009d6b45dc>] mlx5_ib_alloc_implicit_mr+0x41/0×210 [mlx5_ib]
[<00000000879d0d68>] mlx5_ib_reg_user_mr+0x9e/0×6e0 [mlx5_ib]
[<00000000be74bf89>] create_qp+0x2fc/0xf00 [ib_uverbs]
[<000000001a532d22>] ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ+0x1d9/0×230 [ib_uverbs]
[<0000000070f46001>] rdma_alloc_commit_uobject+0xb5/0×120 [ib_uverbs]
[<000000006d8a0b38>] uverbs_alloc+0x2b/0xf0 [ib_uverbs]
[<00000000075217c9>] ksysioctl+0x234/0×7d0
[<00000000eb5c120b>] __x64_sys_ioctl+0x16/0×20
[<00000000db135b48>] do_syscall_64+0x59/0×2e0
Fixes: 1769c4c575 ("RDMA/mlx5: Always remove MRs from the cache before destroying them")
Link: https://lore.kernel.org/r/20201213132940.345554-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change work and completion queues to use smp_load_acquire() and
smp_store_release() to synchronize between driver and users. This commit
goes with a matching series of commits in the rxe user space provider.
Link: https://lore.kernel.org/r/20201210174258.5234-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to get queue number repeatly for different queues from an
AEQE entity, as they are the same. Furthermore, redefine the AEQE
structure to make the codes more readable.
In addition, HNS_ROCE_EVENT_TYPE_CEQ_OVERFLOW is removed because the
hardware never reports this event.
Link: https://lore.kernel.org/r/1607650657-35992-12-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some %d in print format string should be %u, and some prints miss the
useful errno or are in nonstandard format. Just fix above issues.
Link: https://lore.kernel.org/r/1607650657-35992-11-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Types of some fields, variables and parameters of some functions should be
unsigned.
Link: https://lore.kernel.org/r/1607650657-35992-10-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to initialize some variable because they will be assigned
with a value later.
Link: https://lore.kernel.org/r/1607650657-35992-9-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Just format the code without modifying anything, including fixing some
redundant and missing blanks and spaces and changing the variable
definition order.
Link: https://lore.kernel.org/r/1607650657-35992-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As the qp access right is checked and setted in common function
hns_roce_v2_set_opt_fields(), there is no need to set again for a special
case INIT2INIT.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Fixes: 7db82697b8 ("RDMA/hns: Add support for extended atomic in userspace")
Link: https://lore.kernel.org/r/1607650657-35992-7-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the value of sl is larger than 7, if so, an
exception should be returned.
Link: https://lore.kernel.org/r/1607650657-35992-6-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Only the low 12 bits of vlan_id is valid, and service level has been
filled in Address Vector. So there is no need to fill sl in vlan_id in
Address Vector.
Fixes: 7406c0036f ("RDMA/hns: Only record vlan info for HIP08")
Link: https://lore.kernel.org/r/1607650657-35992-5-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The high 6 bits of traffic class in GRH is DSCP (Differentiated Services
Codepoint), the driver should shift it before the hardware gets it when
using RoCEv2.
Fixes: 606bf89e98 ("RDMA/hns: Refactor for hns_roce_v2_modify_qp function")
Fixes: fba429fcf9 ("RDMA/hns: Fix missing fields in address vector")
Link: https://lore.kernel.org/r/1607650657-35992-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Whether to enable the these features should better depend on the enable
flags, not the value of related fields.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Fixes: 3cb2c996c9 ("RDMA/hns: Add support for SCCC in size of 64 Bytes")
Link: https://lore.kernel.org/r/1607650657-35992-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For ib_copy_from_user(), the length of udata may not be the same as that
of cmd. For ib_copy_to_user(), the length of udata may not be the same as
that of resp. So limit the length to prevent out-of-bounds read and write
operations from ib_copy_from_user() and ib_copy_to_user().
Fixes: de77503a59 ("RDMA/hns: RDMA/hns: Assign rq head pointer when enable rq record db")
Fixes: 633fb4d9fd ("RDMA/hns: Use structs to describe the uABI instead of opencoding")
Fixes: ae85bf92ef ("RDMA/hns: Optimize qp param setup flow")
Fixes: 6fd610c573 ("RDMA/hns: Support 0 hop addressing for SRQ buffer")
Fixes: 9d9d4ff788 ("RDMA/hns: Update the kernel header file of hns")
Link: https://lore.kernel.org/r/1607650657-35992-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is not clear what this lock protects. If the authors wanted to ensure
that "dev" does not disappear, that is impossible, given the following
code path:
mlx4_ib_netdev_event (under RTNL mutex)
-> mlx4_ib_scan_netdevs
-> mlx4_ib_update_qps
Also, the dev_base_lock does not protect dev->dev_addr either.
So it serves no purpose here. Remove it.
Link: https://lore.kernel.org/r/20201208193928.1500893-1-vladimir.oltean@nxp.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix incorrect type of max_entries in UVERBS_METHOD_QUERY_GID_TABLE -
max_entries is of type size_t although it can take negative values.
The following static check revealed it:
drivers/infiniband/core/uverbs_std_types_device.c:338 ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE() warn: 'max_entries' unsigned <= 0
Fixes: 9f85cbe50a ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/20201208073545.9723-4-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In procedure ib_register_device, procedure kobject_uevent is called
(advertising that the device is ready for userspace usage) even when
device_enable_and_get() returned an error.
As a result, various RDMA modules attempted to register for the device
even while the device driver was preparing to unregister the device.
Fix this by advertising the device availability only after enabling the
device succeeds.
Fixes: e7a5b4aafd ("RDMA/device: Don't fire uevent before device is fully initialized")
Link: https://lore.kernel.org/r/20201208073545.9723-3-leon@kernel.org
Suggested-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The CQ pool mechanism had two problems:
1. The CQ pool lists were uninitialized in the device registration error
flow. As a result, all the list pointers remained NULL. This caused
the kernel to crash (in procedure ib_cq_pool_destroy) when that error
flow was taken (and unregister called). The stack trace snippet:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0×0000) ? not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
. . .
RIP: 0010:ib_cq_pool_destroy+0x1b/0×70 [ib_core]
. . .
Call Trace:
disable_device+0x9f/0×130 [ib_core]
__ib_unregister_device+0x35/0×90 [ib_core]
ib_register_device+0x529/0×610 [ib_core]
__mlx5_ib_add+0x3a/0×70 [mlx5_ib]
mlx5_add_device+0x87/0×1c0 [mlx5_core]
mlx5_register_interface+0x74/0xc0 [mlx5_core]
do_one_initcall+0x4b/0×1f4
do_init_module+0x5a/0×223
load_module+0x1938/0×1d40
2. At device unregister, when cleaning up the cq pool, the cq's in the
pool lists were freed, but the cq entries were left in the list.
The fix for the first issue is to initialize the cq pool lists when the
ib_device structure is allocated for a new device (in procedure
_ib_alloc_device).
The fix for the second problem is to delete cq entries from the pool lists
when cleaning up the cq pool.
In addition, procedure ib_cq_pool_destroy() is renamed to the more
appropriate name ib_cq_pool_cleanup().
Fixes: 4aa1615268 ("RDMA/core: Fix ordering of CQ pool destruction")
Link: https://lore.kernel.org/r/20201208073545.9723-2-leon@kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 66f57b871e ("RDMA/restrack: Support all QP types") extends
ib_create_qp() to a named ib_create_named_qp(), which takes the caller's
name as argument, but it did not add the new argument description to the
function's kerneldoc.
make htmldocs warns:
./drivers/infiniband/core/verbs.c:1206: warning: Function parameter or member 'caller' not described in 'ib_create_named_qp'
Add a description for this new argument based on the description of the
same argument in other related functions.
Fixes: 66f57b871e ("RDMA/restrack: Support all QP types")
Link: https://lore.kernel.org/r/20201207173255.13355-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Saeed Mahameed says:
====================
mlx5-next auxbus support
This pull request is targeting net-next and rdma-next branches.
This series provides mlx5 support for auxiliary bus devices.
It starts with a merge commit of tag 'auxbus-5.11-rc1' from
gregkh/driver-core into mlx5-next, then the mlx5 patches that will convert
mlx5 ulp devices (netdev, rdma, vdpa) to use the proper auxbus
infrastructure instead of the internal mlx5 device and interface management
implementation, which Leon is deleting at the end of this patchset.
Link: https://lore.kernel.org/alsa-devel/20201026111849.1035786-1-leon@kernel.org/
Thanks to everyone for the joint effort !
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Remove IB representors dead code
net/mlx5: Simplify eswitch mode check
net/mlx5: Delete custom device management logic
RDMA/mlx5: Convert mlx5_ib to use auxiliary bus
net/mlx5e: Connect ethernet part to auxiliary bus
vdpa/mlx5: Connect mlx5_vdpa to auxiliary bus
net/mlx5: Register mlx5 devices to auxiliary virtual bus
vdpa/mlx5: Make hardware definitions visible to all mlx5 devices
net/mlx5_core: Clean driver version and name
net/mlx5: Properly convey driver version to firmware
driver core: auxiliary bus: minor coding style tweaks
driver core: auxiliary bus: make remove function return void
driver core: auxiliary bus: move slab.h from include file
Add auxiliary bus support
====================
Link: https://lore.kernel.org/r/20201207053349.402772-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The query_gid_table ioctl skips non IB/RoCE ports, which as a result
returns an empty gid table for devices such as EFA which have a GID table,
but are not IB/RoCE.
Fixes: c4b4d548fa ("RDMA/core: Introduce new GID table query API")
Link: https://lore.kernel.org/r/20201206153238.34878-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iser_initialize_task_headers() uses in_interrupt() to find out if it is
safe to acquire a mutex.
in_interrupt() is deprecated as it is ill defined and does not provide
what it suggests. Aside of that it covers only parts of the contexts in
which a mutex may not be acquired.
The following callchains exist:
iscsi_queuecommand() *locks* iscsi_session::frwd_lock
-> iscsi_prep_scsi_cmd_pdu()
-> session->tt->init_task() (iscsi_iser_task_init())
-> iser_initialize_task_headers()
-> iscsi_iser_task_xmit() (iscsi_transport::xmit_task)
-> iscsi_iser_task_xmit_unsol_data()
-> iser_send_data_out()
-> iser_initialize_task_headers()
iscsi_data_xmit() *locks* iscsi_session::frwd_lock
-> iscsi_prep_mgmt_task()
-> session->tt->init_task() (iscsi_iser_task_init())
-> iser_initialize_task_headers()
-> iscsi_prep_scsi_cmd_pdu()
-> session->tt->init_task() (iscsi_iser_task_init())
-> iser_initialize_task_headers()
__iscsi_conn_send_pdu() caller has iscsi_session::frwd_lock
-> iscsi_prep_mgmt_task()
-> session->tt->init_task() (iscsi_iser_task_init())
-> iser_initialize_task_headers()
-> session->tt->xmit_task() (
The only callchain that is close to be invoked in preemptible context:
iscsi_xmitworker() worker
-> iscsi_data_xmit()
-> iscsi_xmit_task()
-> conn->session->tt->xmit_task() (iscsi_iser_task_xmit()
In iscsi_iser_task_xmit() there is this check:
if (!task->sc)
return iscsi_iser_mtask_xmit(conn, task);
so it does end up in iser_initialize_task_headers() and
iser_initialize_task_headers() relies on iscsi_task::sc == NULL.
Remove conditional locking of iser_conn::state_mutex because there is no
call chain to do so. Remove the goto label and return early now that there
is no clean up needed.
Link: https://lore.kernel.org/r/20201204174256.62xfcvudndt7oufl@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Max Gurtovoy <maxg@nvidia.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, DM MR registration flow doesn't set the mlx5_ib_dev pointer and
can cause a NULL pointer dereference if userspace dumps the MR via rdma
tool.
Assign the IB device together with the other fields and remove the
redundant reference of mlx5_ib_dev from mlx5_ib_mr.
Cc: stable@vger.kernel.org
Fixes: 6c29f57ea4 ("IB/mlx5: Device memory mr registration support")
Link: https://lore.kernel.org/r/20201203190807.127189-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These flags will be returned to the userspace through ABI, so they should
be defined in hns-abi.h. Furthermore, there is no need to include
hns-abi.h in every source files, it just needs to be included in the
common header file.
Link: https://lore.kernel.org/r/1606872560-17823-1-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
While creating qps, the driver adds one extra entry to the sq size passed
by the ULPs in order to avoid queue full condition. When ULPs creates QPs
with max_qp_wr reported, driver creates QP with 1 more than the max_wqes
supported by HW. Create QP fails in this case. To avoid this error, reduce
1 entry in max_qp_wqes and report it to the stack.
Link: https://lore.kernel.org/r/1606741986-16477-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is all a giant train wreck of error handling, in many cases the MR is
left in some corrupted state where continuing on is going to lead to
chaos, or various unwinds/order is missed.
rereg had three possible completely different actions, depending on flags
and various details about the MR. Split the three actions into three
functions, and call the right action from the start.
For each action carefully design the error handling to fit the action:
- UMR access/PD update is a simple UMR, if it fails the MR isn't changed,
so do nothing
- PAS update over UMR is multiple UMR operations. To keep everything sane
revoke access to the MKey while it is being changed and restore it once
the MR is correct.
- Recreating the mkey should completely build a parallel MR with a fully
loaded PAS then swap and destroy the old one. If it fails the original
should be left untouched. This is handled in the core code. Directly
call the normal MR creation functions, possibly re-using the existing
umem.
Add support for working with ODP MRs. The READ/WRITE access flags can be
changed by UMR and we can trivially convert to/from ODP MRs using the
logic to build a completely new MR.
This new logic also fixes various problems with MRs continuing to work
while their PAS lists are no longer valid, eg during a page size change.
Link: https://lore.kernel.org/r/20201130075839.278575-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This function handles an ODP and regular MR flow all mushed together, even
though the two flows are quite different. Split them into two dedicated
functions.
Link: https://lore.kernel.org/r/20201130075839.278575-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5 has an ugly flow where it tries to allocate a new MR and replace the
existing MR in the same memory during rereg. This is very complicated and
buggy. Instead of trying to replace in-place inside the driver, provide
support from uverbs to change the entire HW object assigned to a handle
during rereg_mr.
Since destroying a MR is allowed to fail (ie if a MW is pointing at it)
and can't be detected in advance, the algorithm creates a completely new
uobject to hold the new MR and swaps the IDR entries of the two objects.
The old MR in the temporary IDR entry is destroyed, and if it fails
rereg_mr succeeds and destruction is deferred to FD release. This
complexity is why this cannot live in a driver safely.
Link: https://lore.kernel.org/r/20201130075839.278575-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No reason only one caller checks this. This properly blocks ODP
from the rereg flow if the device does not support ODP.
Link: https://lore.kernel.org/r/20201130075839.278575-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Unknown flags should be EOPNOTSUPP, only zero flags is EINVAL. Flags is
actually the rereg action to perform.
The checking of the start/hca_va/etc is also redundant and ib_umem_get()
does these checks and returns proper error codes.
Fixes: 7e6edb9b2e ("IB/core: Add user MR re-registration support")
Link: https://lore.kernel.org/r/20201130075839.278575-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Provide mlx5_core device instead of "priv" pointer while checking
eswith mode.
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The conversion to auxiliary bus solves long standing issue with
existing mlx5_ib<->mlx5_core coupling. It required to have both
modules in initramfs if one of them needed for the boot.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Use dma_set_mask_and_coherent() instead of pci_set_dma_mask() followed by
a pci_set_consistent_dma_mask().
Link: https://lore.kernel.org/r/20201201091811.37984-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The variable 'cnt' is used to represent the max number of sge an SQ WQE
can use at first, then it means how many extended sge an SQ has. In
addition, this function has no need to return a value. So refactor and
encapsulate the parts of getting number of extended sge a WQE can use to
make it easier to understand.
Link: https://lore.kernel.org/r/1606558959-48510-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Page alignment is required when setting the number of extended sge
according to the hardware's achivement. If the space of needed extended
sge is greater than one page, the roundup_pow_of_two() can ensure
that. But if the needed extended sge isn't 0 and can not be filled in a
whole page, the driver should align it specifically.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1606558959-48510-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
One RC SQ WQE can store 2 sges but UD can't, so ignore 2 valid sges of
wr.sglist for RC which have been filled in WQE before setting extended
sge. Either of RC and UD can not contain 0-length sges, so these 0-length
sges should be skipped.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1606558959-48510-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The local variables cur_state and new_state hold the state that should be
used for the modify QP operation instead of the ones in the ib_qp_attr
struct.
Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Link: https://lore.kernel.org/r/20201201091724.37016-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The push feature does not work as expected in x722 and has historically
been disabled in the driver.
Purge all remaining code related to the push feature in i40iw.
Link: https://lore.kernel.org/r/20201125005616.1800-3-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into rdma.git for-next
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. QPs need to enable stash by default.
Link: https://lore.kernel.org/r/1606374251-21512-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. CQs need to enable stash by default.
Link: https://lore.kernel.org/r/1606374251-21512-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to improve performance by balancing the load between different
banks of cache, the QPC cache is desigend to choose one of 8 banks
according to lower 3 bits of QPN. The hns driver needs to count the number
of QP on each bank and then assigns the QP being created to the bank with
the minimum load first.
Link: https://lore.kernel.org/r/1606220649-1465-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The latest changes in restrack name handling allowed to simplify the QP
creation code to support all types of QPs.
For example XRC QP are presented with rdmatool.
$ ibv_xsrq_pingpong &
$ rdma res show qp
link ibp0s9/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 7 type UD state RTS sq-psn 0 comm [mlx5_ib]
link ibp0s9/1 lqpn 42 type XRC_TGT state INIT sq-psn 0 path-mig-state MIGRATED comm [ib_uverbs]
link ibp0s9/1 lqpn 43 type XRC_INI state INIT sq-psn 0 path-mig-state MIGRATED pdn 197 pid 419 comm ibv_xsrq_pingpong
Link: https://lore.kernel.org/r/20201117070148.1974114-4-leon@kernel.org
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver QP types are special case with no IBTA restrictions. For example,
EFA implemented creation of this QP type as regular one, while mlx5
separated create to two step: create and modify. That separation causes to
the situation where DC QP (mlx5) is always added to the same xarray index
zero.
This change allows to drivers like mlx5 simply disable restrack DB
tracking, but it doesn't disable kref on the memory.
Fixes: 52e0a118a2 ("RDMA/restrack: Track driver QP types in resource tracker")
Link: https://lore.kernel.org/r/20201117070148.1974114-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Device memory (DM) are registered as MR during initialization flow, these
MRs were not tracked by resource tracker and had res->valid set as a
false. Update the code to manage them too.
Before this change:
$ ibv_rc_pingpong -j &
$ rdma res show mr <-- shows nothing
After this change:
$ ibv_rc_pingpong -j &
$ rdma res show mr
dev ibp0s9 mrn 0 mrlen 4096 pdn 3 pid 734 comm ibv_rc_pingpong
Fixes: be934cca9e ("IB/uverbs: Add device memory registration ioctl support")
Link: https://lore.kernel.org/r/20201117070148.1974114-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
DMA operation of the IB device is done using ib_device->dma_device.
Instead of accessing parent of the IB device, use the PCI dma device which
is setup to ib_device->dma_device during IB device registration.
Link: https://lore.kernel.org/r/20201125064628.8431-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Coverity reports "Potentially overflowing expression ..." warning, which
is correct thing to complain from the compiler point of view, but this is
not possible in the current code. Still, this is a small error as there
are some future situations that might need to use a 32 bit offset. Use ULL
so the calculation works up to 63.
Fixes: b045db62f6 ("RDMA/mlx5: Use ib_umem_find_best_pgoff() for SRQ")
Link: https://lore.kernel.org/r/20201125061704.6580-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The return code from uverbs_zalloc() was wrongly checked, it is ERR_PTR
not NULL like other allocators:
drivers/infiniband/hw/mlx5/devx.c:2110 devx_umem_reg_cmd_alloc() warn: passing zero to 'PTR_ERR'
Fixes: 878f7b31c3 ("RDMA/mlx5: Use ib_umem_find_best_pgsz() for devx")
Link: https://lore.kernel.org/r/0-v1-4d05ccc1c223+173-devx_err_ptr_jgg@nvidia.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The loopback flag will be set to 1 by the hardware when the source mac
address is same as the destination mac address. So the driver don't need
to compare them.
Fixes: d6a3627e31 ("RDMA/hns: Optimize wqe buffer set flow for post send")
Link: https://lore.kernel.org/r/1605526408-6936-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Traffic class and hop limit in address vector is not assigned from GRH,
but it will be filled into UD SQ WQE. So the hardware will get a wrong
value.
Fixes: 82e620d9c3 ("RDMA/hns: Modify the data structure of hns_roce_av")
Link: https://lore.kernel.org/r/1605526408-6936-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Address handle is set for connected QP types such as RC and UC, and thus
can also be queried.
Since XRC QP types INI and TGT are connected, it should be possible to
query their address handle as well.
Until now it was not the case, and although the firmware supported it, the
driver allowed querying the address handle only for RC and UC.
Hence, we enable it now for INI and TGT QPs as well.
Link: https://lore.kernel.org/r/20201115121425.139833-3-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Address handle is set for connected QP types such as RC and UC, and thus
can also be queried.
Since XRC QP types INI and TGT are connected, it should be possible to
query their address handle as well.
Until now it was not the case, and although the firmware supported it, the
driver allowed querying the address handle only for RC and UC.
Hence, we enable it now for INI and TGT QPs as well.
Link: https://lore.kernel.org/r/20201115121425.139833-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a memory window is bound to a memory region, the local write access
should be set for its mtpt table.
Fixes: c7c2819140 ("RDMA/hns: Add MW support for hip08")
Link: https://lore.kernel.org/r/1606386372-21094-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The maximum number of retransmission should be returned when querying QP,
not the value of retransmission counter.
Fixes: 99fcf82521 ("RDMA/hns: Fix the wrong value of rnr_retry when querying qp")
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1606382977-21431-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ capacity is got from the firmware, whose field should be ended at
bit 19.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1606382812-23636-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Two earlier bug fixes have created a security problem in the hfi1
driver. One fix aimed to solve an issue where current->mm was not valid
when closing the hfi1 cdev. It attempted to do this by saving a cached
value of the current->mm pointer at file open time. This is a problem if
another process with access to the FD calls in via write() or ioctl() to
pin pages via the hfi driver. The other fix tried to solve a use after
free by taking a reference on the mm.
To fix this correctly we use the existing cached value of the mm in the
mmu notifier. Now we can check in the insert, evict, etc. routines that
current->mm matched what the notifier was registered for. If not, then
don't allow access. The register of the mmu notifier will save the mm
pointer.
Since in do_exit() the exit_mm() is called before exit_files(), which
would call our close routine a reference is needed on the mm. We rely on
the mmgrab done by the registration of the notifier, whereas before it was
explicit. The mmu notifier deregistration happens when the user context is
torn down, the creation of which triggered the registration.
Also of note is we do not do any explicit work to protect the interval
tree notifier. It doesn't seem that this is going to be needed since we
aren't actually doing anything with current->mm. The interval tree
notifier stuff still has a FIXME noted from a previous commit that will be
addressed in a follow on patch.
Cc: <stable@vger.kernel.org>
Fixes: e0cf75deab ("IB/hfi1: Fix mm_struct use after free")
Fixes: 3faa3d9a30 ("IB/hfi1: Make use of mm consistent")
Link: https://lore.kernel.org/r/20201125210112.104301.51331.stgit@awfm-01.aw.intel.com
Suggested-by: Jann Horn <jannh@google.com>
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rdma_detroy_id() cannot be called under &lock - we must instead keep the
error'd ID around until &lock can be released, then destroy it.
This is complicated by the usual way listen IDs are destroyed through
cma_process_remove() which can run at any time and will asynchronously
destroy the same ID.
Remove the ID from visiblity of cma_process_remove() before going down the
destroy path outside the locking.
Fixes: c80a0c52d8 ("RDMA/cma: Add missing error handling of listen_id")
Link: https://lore.kernel.org/r/20201118133756.GK244516@ziepe.ca
Reported-by: syzbot+1bc48bf7f78253f664a9@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
i40iw_mmap manipulates the vma->vm_pgoff to differentiate a push page mmap
vs a doorbell mmap, and uses it to compute the pfn in remap_pfn_range
without any validation. This is vulnerable to an mmap exploit as described
in: https://lore.kernel.org/r/20201119093523.7588-1-zhudi21@huawei.com
The push feature is disabled in the driver currently and therefore no push
mmaps are issued from user-space. The feature does not work as expected in
the x722 product.
Remove the push module parameter and all VMA attribute manipulations for
this feature in i40iw_mmap. Update i40iw_mmap to only allow DB user
mmapings at offset = 0. Check vm_pgoff for zero and if the mmaps are bound
to a single page.
Cc: <stable@kernel.org>
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Link: https://lore.kernel.org/r/20201125005616.1800-2-shiraz.saleem@intel.com
Reported-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a group of flags to control the 'struct hns_roce_buf' allocation
flow, this is used to support the caller running in atomic context.
Link: https://lore.kernel.org/r/1605347916-15964-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Link: https://lore.kernel.org/r/20201121095127.1335228-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We return 'err' in the error branch, but this variable may be set as zero
by the above code. Fix it by setting 'err' as a negative value before we
goto the error label.
Fixes: 74c2174e7b ("IB uverbs: add mthca user CQ support")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/1605837422-42724-1-git-send-email-wangxiongfeng2@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Before create CQ, make sure that the requested number of CQEs is in the
supported range.
Fixes: cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Link: https://lore.kernel.org/r/20201108132007.67537-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This moves siw and rxe to be virtual devices in the device tree:
lrwxrwxrwx 1 root root 0 Nov 6 13:55 /sys/class/infiniband/rxe0 -> ../../devices/virtual/infiniband/rxe0/
Previously they were trying to parent themselves to the physical device of
their attached netdev, which doesn't make alot of sense.
My hope is this will solve some weird syzkaller hits related to sysfs as
it could be possible that the parent of a netdev is another netdev, eg
under bonding or some other syzkaller found netdev configuration.
Nesting a ib_device under anything but a physical device is going to cause
inconsistencies in sysfs during destructions.
Link: https://lore.kernel.org/r/0-v1-dcbfc68c4b4a+d6-virtual_dev_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently ipoib choose cq completion vector based on port number, when HCA
only have one port, all the interface recv queue completion are bind to cq
completion vector 0.
To better distribute the load, use same method as __ib_alloc_cq_any to
choose completion vector, with the change, each interface now use
different completion vectors.
Link: https://lore.kernel.org/r/20201013074342.15867-1-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.
Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some of the SRQ types are created using a WQ, and the WQ requires a
different parameter set to mlx5_umem_find_best_quantized_pgoff() as it has
a 5 bit page_offset.
Add the umem to the mlx5_srq_attr and defer computing the PAS data until
the code has figured out what kind of mailbox to use. Compute the PAS
directly from the umem for each of the four unique mailbox types.
This also avoids allocating memory to store the user PAS, instead it is
written directly to the mailbox as in most other cases.
Fixes: 01949d0109 ("net/mlx5_core: Enable XRCs and SRQs when using ISSI > 0")
Link: https://lore.kernel.org/r/20201115114311.136250-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since devx uses the new rdma_for_each_block() to fill the PAS it can also
use ib_umem_find_best_pgsz().
However, the umem constructionin devx is complicated, the umem must still
respect all the HW limits such as page_offset_quantized and the IOVA
alignment.
Since we don't know what the user intends to use the umem for we have to
limit it to PAGE_SIZE.
There are users trying to mix umem's with mkeys so this makes them work
reliably, at least for an identity IOVA, by ensuring the IOVA matches the
selected page size.
Last user of mlx5_ib_get_buf_offset() so it can also be removed.
Fixes: aeae94579c ("IB/mlx5: Add DEVX support for memory registration")
Link: https://lore.kernel.org/r/20201115114311.136250-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This fixes a bug where the page_offset was not being considered when
building a CQ. The HW specification says it 'must be zero', so use
a variant of mlx5_umem_find_best_quantized_pgoff() with a 0 pgoff_bitmask
to force this result.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20201115114311.136250-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RQ WQ created when making a raw ethernet QP copies the PAS list from
a dummy QPC command created earlier in the flow. The WQC and QPC PAS lists
are not fully compatible as the page_offset is a different size.
Create the RQ WQ's PAS list directly and do not try to copy it from
another command structure.
Like the prior patch, this also means that badly aligned buffers were not
correctly rejected.
Link: https://lore.kernel.org/r/20201115114311.136250-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This fixes a subtle bug, the WQ mailbox has only 5 bits to describe the
page_offset, while mlx5_ib_get_buf_offset() is hard wired to only work
with 6 bit page_offsets.
Thus it did not properly reject badly aligned buffers.
Fixes: 79b20a6c30 ("IB/mlx5: Add receive Work Queue verbs")
Fixes: 0fb2ed66a1 ("IB/mlx5: Add create and destroy functionality for Raw Packet QP")
Link: https://lore.kernel.org/r/20201115114311.136250-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
SRQ uses a quantized and scaled page_offset, which is another variation of
ib_umem_find_best_pgsz(). Add mlx5_umem_find_best_quantized_pgoff() to
perform this calculation for each mailbox. A macro shows how the
calculation is directly connected to the mailbox format.
This new routine replaces the limited mlx5_ib_cont_pages() and
mlx5_ib_get_buf_offset() pairing which would reject valid configurations
rather than adjust the page_size to make it work.
In turn this is much more aggressive about choosing large page sizes for
these objects and when THP is enabled it will now often find a single page
solution.
Link: https://lore.kernel.org/r/20201115114311.136250-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drivers now expose two callbacks for address handle creation, one for
uverbs and one for kverbs. EFA only supports uverbs so the .create_ah
assignment can be removed. Fix the core code caller to check the proper
function pointer.
Link: https://lore.kernel.org/r/20201115103404.48829-3-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Don't silently continue if rdma_listen() fails but destroy previously
created CM_ID and return an error to the caller.
Fixes: d02d1f5359 ("RDMA/cma: Fix deadlock destroying listen requests")
Link: https://lore.kernel.org/r/20201104144008.3808124-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Special QPs (SMI and GSI) have different rules in regards of their QP
numbers. While all other QP numbers are unique per-device, the QP0 and QP1
are created per-port as requested by IBTA.
In multiple port devices, the number of SMI and GSI QPs with be equal to
the number ports.
$ rdma dev
0: ibp0s9: node_type ca fw 4.4.9999 node_guid 5254:00c0:fe12:3455 sys_image_guid 5254:00c0:fe12:3455
$ rdma link
0/1: ibp0s9/1: subnet_prefix fe80:0000:0000:0000 lid 13397 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
0/2: ibp0s9/2: subnet_prefix fe80:0000:0000:0000 lid 13397 sm_lid 49151 lmc 0 state UNKNOWN physical_state UNKNOWN
Before:
$ rdma res show qp type SMI,GSI
link ibp0s9/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
After:
$ rdma res show qp type SMI,GSI
link ibp0s9/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/2 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/2 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
Link: https://lore.kernel.org/r/20201104144008.3808124-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
RDMA counters are allocated and bounded to QP immediately after that.
Only after this two step process they are really usable. By combining
the logic, we are ensuring that once counter is returned to the caller,
it will have everything set.
Link: https://lore.kernel.org/r/20201104144008.3808124-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new
name of this function.
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 4730f4a6c6 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/1605249747-17942-1-git-send-email-zhangchangzhong@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use netdev->tstats instead of a member of hfi1_ipoib_dev_priv for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A return statement is omitted after getting HEM table, then the newly
allocated pointer will be freed directly, which will cause a calltrace
when the driver was removed.
Fixes: d6d91e4621 ("RDMA/hns: Add support for configuring GMV table")
Link: https://lore.kernel.org/r/1605180582-46504-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
RDMA ULPs must not call DMA mapping APIs directly but instead use the
ib_dma_* wrappers.
Fixes: 0c16d9635e ("RDMA/umem: Move to allocate SG table from pages")
Link: https://lore.kernel.org/r/20201106181941.1878556-3-hch@lst.de
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
dma_virt_ops requires that all pages have a kernel virtual address.
Introduce a INFINIBAND_VIRT_DMA Kconfig symbol that depends on !HIGHMEM
and make all three drivers depend on the new symbol.
Also remove the ARCH_DMA_ADDR_T_64BIT dependency, which has been obsolete
since commit 4965a68780 ("arch: define the ARCH_DMA_ADDR_T_64BIT config
symbol in lib/Kconfig")
Fixes: 551199aca1 ("lib/dma-virt: Add dma_virt_ops")
Link: https://lore.kernel.org/r/20201106181941.1878556-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix missing kfree in pvrdma_register_device() when failure from
ib_device_set_netdev().
Fixes: 4b38da75e0 ("RDMA/drivers: Convert easy drivers to use ib_device_set_netdev()")
Link: https://lore.kernel.org/r/20201111032202.17925-1-miaoqinglang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
gcc points out a suspicious mixing of enum types in a function that
converts from MTHCA_OPCODE_* values to IB_WC_* values:
drivers/infiniband/hw/mthca/mthca_cq.c: In function 'mthca_poll_one':
drivers/infiniband/hw/mthca/mthca_cq.c:607:21: warning: implicit conversion from 'enum <anonymous>' to 'enum ib_wc_opcode' [-Wenum-conversion]
607 | entry->opcode = MTHCA_OPCODE_INVALID;
Nothing seems to ever check for MTHCA_OPCODE_INVALID again, no idea if
this is meaningful, but it seems harmless as it deals with an invalid
input.
Remove MTHCA_OPCODE_INVALID and set the ib_wc_opcode to 0xFF, which is
still bogus, but at least doesn't make compiler warnings.
Fixes: 2a4443a699 ("[PATCH] IB/mthca: fill in opcode field for send completions")
Link: https://lore.kernel.org/r/20201026211311.3887003-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All FD object destroy implementations return 0, so declare this callback
void.
Link: https://lore.kernel.org/r/20201104144556.3809085-3-leon@kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove the ib_is_destroyable_retryable() concept.
The idea here was to allow the drivers to forcibly clean the HW object
even if they otherwise didn't want to (eg because of usecnt). This was an
attempt to clean up in a world where drivers were not allowed to fail HW
object destruction.
Now that we are going back to allowing HW objects to fail destroy this
doesn't make sense. Instead if a uobject's HW object can't be destroyed it
is left on the uobject list and it is up to uverbs_destroy_ufile_hw() to
clean it. Multiple passes over the uobject list allow hidden dependencies
to be resolved. If that fails the HW driver is broken, throw a WARN_ON and
leak the HW object memory.
All the other tricky failure paths (eg on creation error unwind) have
already been updated to this new model.
Link: https://lore.kernel.org/r/20201104144556.3809085-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The xarray is never mutated from an IRQ handler, only from work queues
under a spinlock_irq. Thus there is no reason for it be an IRQ type
xarray.
This was copied over from the original IDR code, but the recent rework put
the xarray inside another spinlock_irq which will unbalance the unlocking.
Fixes: c206f8bad1 ("RDMA/cm: Make it clearer how concurrency works in cm_req_handler()")
Link: https://lore.kernel.org/r/0-v1-808b6da3bd3f+1857-cm_xarray_no_irq_jgg@nvidia.com
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is not the kernel style, warning reported by coccicheck:
./ib_isert.c:1104:12-24: WARNING: Comparison to bool
Link: https://lore.kernel.org/r/1604404674-32998-1-git-send-email-zou_wei@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the commit fd49ddaf7e ("RDMA/rxe: prevent rxe creation on top of
vlan interface") does not permit rxe on top of vlan device, all the stuff
related with vlan should be removed.
Fixes: fd49ddaf7e ("RDMA/rxe: prevent rxe creation on top of vlan interface")
Link: https://lore.kernel.org/r/1604326422-18625-1-git-send-email-yanjunz@nvidia.com
Signed-off-by: Zhu Yanjun <yanjunz@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer in
rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target
-----BEGIN PGP SIGNATURE-----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=y+a3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer
in rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
RDMA/vmw_pvrdma: Fix the active_speed and phys_state value
IB/srpt: Fix memory leak in srpt_add_one
RDMA: Fix software RDMA drivers for dma mapping error
htmldocs fails with:
drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'
Fixes: 372a178628 ("IB/srpt: Fix memory leak in srpt_add_one")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drop the sess_cmd_lock by:
- Removing the sess_cmd_list use from LIO core, because it's been
moved to qla2xxx.
- Removing sess_tearing_down check in the I/O path. Instead of using that
bit and the sess_cmd_lock, we rely on the cmd_count percpu ref. To do
this we switch to percpu_ref_kill_and_confirm/percpu_ref_tryget_live.
Link: https://lore.kernel.org/r/1604257174-4524-7-git-send-email-michael.christie@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
cmd.bad_sector currently gets packed into the sense INFORMATION field for
TCM_LOGICAL_BLOCK_{GUARD,APP_TAG,REF_TAG}_CHECK_FAILED errors, which carry
an .add_sector_info flag in the sense_detail_table to ensure this.
In preparation for propagating a byte offset on COMPARE AND WRITE
TCM_MISCOMPARE_VERIFY error, rename cmd.bad_sector to cmd.sense_info and
sense_detail.add_sector_info to sense_detail.add_sense_info so that it
better reflects the sense INFORMATION field destination.
[ddiss: update previously overlooked ib_isert]
Link: https://lore.kernel.org/r/20201031233211.5207-3-ddiss@suse.de
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
number of warnings from the once-noisy docs build process is nearly zero.
Getting to this point has required a lot of work; once there, hopefully we
can keep things that way.
I have packaged this as a separate pull because it does a fair amount of
reaching outside of Documentation/. The changes are all in comments and in
code placement. It's all been in linux-next since last week.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+hscQPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgZAH/0JeDA/1VLZYYTmdABz8mjBZsoW9tyPGGztF
nsh5ykdHhL3MeTRwumW5armLVrfKhd1XT+nIzD7OcWlqu+RDOvQ5I95rahr473hP
1SHTjqm3/AlJwQoeS72X5U6QEJQ58e2IwCbP23H3x7I3Q3snEA/HhswzxurfoB/Z
j81YzDV2YPEc0LJWZ5Vn0NEdwP8cdpFv5rojsQmepq7K0yJ7tEHb7/u2cEuUBgXS
8LcYCNPLpiN+q5N8uQ5oDjIUNdLQvP03kgKtQWiCTr4BRydOrDlJie28LIedamEz
anu7UfaVK4bxn+ugRI0g2+aWQKux81ULCinKUWmLRNbcxjhaQqQ=
=hDfp
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linux
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
The pvrdma_port_attr structure is ABI toward the hypervisor, changing it
breaks the ability to report the speed properly. Revert the change to u16.
Fixes: 376ceb31ff ("RDMA: Fix link active_speed size")
Link: https://lore.kernel.org/r/20201102225437.26557-1-aditr@vmware.com
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IBTA specification has new speed - NDR. That speed supports signaling
rate of 100Gb. mlx5 IB driver translates link modes reported by ConnectX
device to IB speed and width. Added translation of new 100Gb, 200Gb and
400Gb link modes to NDR IB type and width of x1, x2 or x4 respectively.
Link: https://lore.kernel.org/r/20201026133738.1340432-3-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add new IBTA speed NDR, supporting signaling rate of 100Gb.
Link: https://lore.kernel.org/r/20201026133738.1340432-2-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IBTA specification has new speeds - HDR and NDR, supporting signaling
rate of 50Gb and 100Gb respectively. ethtool support of ipoib driver
translates IB speed to signaling rate. Added translation of HDR and NDR IB
types to rates of 50Gb and 100Gb ethernet speed.
Link: https://lore.kernel.org/r/20201026132904.1338526-1-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These two drivers open code the call to POST_SEND and do not use the
rdma-core wrapper to do it, thus their usages was missed during the audit.
Both drivers use this as a doorbell to signal the kernel to start DMA.
Fixes: 628c02bf38 ("RDMA: Remove uverbs cmds from drivers that don't use them")
Link: https://lore.kernel.org/r/0-v1-4608c5610afa+fb-uverbs_cmd_post_send_fix_jgg@nvidia.com
Reported-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rv cannot be 'EAGAIN' in the previous path, we should use '-EAGAIN' to
check it. For example:
Call trace:
->siw_cm_work_handler
->siw_proc_mpareq
->siw_recv_mpa_rr
Link: https://lore.kernel.org/r/20201028122509.47074-1-zhangqilong3@huawei.com
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Failure in srpt_refresh_port() for the second port will leave MAD
registered for the first one, however, the srpt_add_one() will be marked
as "failed" and SRPT will leak resources for that registered but not used
and released first port.
Unregister the MAD agent for all ports in case of failure.
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Link: https://lore.kernel.org/r/20201028065051.112430-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that all the PAS arrays or UMR XLT's for mkcs are filled using
rdma_for_each_block() we can use the common ib_umem_find_best_pgsz()
algorithm.
Link: https://lore.kernel.org/r/20201026132314.1336717-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Mixing these together is just a mess, make a dedicated version,
mlx5_ib_update_mr_pas(), which directly loads the whole MTT for a non-ODP
MR.
The split out version can trivially use a simple loop with
rdma_for_each_block() which allows using the core code to compute the MR
pages and avoids seeking in the SGL list after each chunk as the
__mlx5_ib_populate_pas() call required.
Significantly speeds loading large MTTs.
Link: https://lore.kernel.org/r/20201026132314.1336717-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The memory allocation is quite complicated, and makes this function hard
to understand. Refactor things so that a function call sets up the WR, SG,
DMA mapping and buffer, further splitting that into buffer and DMA/wr.
This also slightly changes the buffer allocation logic to try an order 0
page allocation (with OOM warnings on) before going to the emergency page.
Link: https://lore.kernel.org/r/20201026132314.1336717-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This routine converts the umem SGL into a list of fixed pages for DMA,
which is exactly what rdma_umem_for_each_dma_block() is for, use the
common code directly.
Link: https://lore.kernel.org/r/20201026132314.1336717-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is the same as ib_umem_num_dma_blocks(umem, 1UL << page_shift), have
the callers compute it directly.
Link: https://lore.kernel.org/r/20201026131936.1335664-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Only alloc_mr_from_cache() needs order and can trivially compute it, so
lift it to the one call site and remove the NULL arguments.
Link: https://lore.kernel.org/r/20201026131936.1335664-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For the user MR path, instead of calling this after getting the umem, call
it as part of creating the struct mlx5_ib_mr and distill its output to a
single page_shift stored inside the mr.
This avoids passing around the tuple of its output. Based on the umem and
page_shift, the output arguments can be computed using:
count == ib_umem_num_pages(mr->umem)
shift == mr->page_shift
ncont == ib_umem_num_dma_blocks(mr->umem, 1 << mr->page_shift)
order == order_base_2(ncont)
And since mr->page_shift == umem_odp->page_shift then ncont ==
ib_umem_num_dma_blocks() == ib_umem_odp_num_pages() for ODP umems.
Link: https://lore.kernel.org/r/20201026131936.1335664-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
reg_pages should always contain mr->npage since when the mr is finally
de-reg'd it is always subtracted out.
If there were any error exits then mlx5_ib_rereg_user_mr() would leave the
reg_pages adjusted and this will cause it to be double subtracted
eventually.
The manipulation of reg_pages is inherently connected to the umem, so lift
it out of set_mr_fields() and only adjust it around creating/destroying a
umem.
reg_pages is only used for diagnostics in sysfs.
Fixes: 7d0cc6edcc ("IB/mlx5: Add MR cache for large UMR regions")
Link: https://lore.kernel.org/r/20201026131936.1335664-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The is only ever set to non-zero if the MR is from the cache, and if it is
cached then the order is in cached_ent->order.
Make it clearer that use_umr_mtt_update() only returns true for cached MRs
and remove the redundant data.
Link: https://lore.kernel.org/r/20201026131936.1335664-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make changes to use sysfs_emit in the RDMA code as cocci scripts can not
be written to handle _all_ the possible variants of various sprintf family
uses in sysfs show functions.
While there, make the code more legible and update its style to be more
like the typical kernel styles.
Miscellanea:
o Use intermediate pointers for dereferences
o Add and use string lookup functions
o return early when any intermediate call fails so normal return is
at the bottom of the function
o mlx4/mcg.c:sysfs_show_group: use scnprintf to format intermediate strings
Link: https://lore.kernel.org/r/f5c9e4c9d8dafca1b7b70bd597ee7f8f219c31c8.1602122880.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Changeset c804af2c1d ("IB/srpt: use new shared CQ mechanism")
added a new member for struct srpt_rdma_ch, but didn't add the
corresponding kernel-doc markup, as repoted when doing
"make htmldocs":
./drivers/infiniband/ulp/srpt/ib_srpt.h:331: warning: Function parameter or member 'cq_size' not described in 'srpt_rdma_ch'
Add a description for it.
Fixes: c804af2c1d ("IB/srpt: use new shared CQ mechanism")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/df0e5f0e866b91724299ef569a2da8115e48c0cf.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a interface to fill GMV(SGID/SMAC/VLAN) table for HIP09, all of above
source address information is stored as an entry in GMV table. The users
just need to provide the index to the hardware when POST SEND.
Link: https://lore.kernel.org/r/1603508836-33054-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP09 supports to store SGID/SMAC/VLAN together in a table named GMV. The
driver needs to allocate memory for it and tell the information about this
region to hardware.
Link: https://lore.kernel.org/r/1603508836-33054-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the three functions share the similar logic, let's introduce one
common function for it.
Link: https://lore.kernel.org/r/20201023074353.21946-12-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This function isn't needed since no caller checks the old_state of sess.
Link: https://lore.kernel.org/r/20201023074353.21946-11-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The purpose of srv_mutex is to protect srv_list as in put_srv, so no need
to hold it when allocate memory for srv since it could be time consuming.
Otherwise if one machine has limited memory, rsrv_close_work could be
blocked for a longer time due to the mutex is held by get_or_create_srv
since it can't get memory in time.
INFO: task kworker/1:1:27478 blocked for more than 120 seconds.
Tainted: G O 4.14.171-1-storage #4.14.171-1.3~deb9
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:1 D 0 27478 2 0x80000000
Workqueue: rtrs_server_wq rtrs_srv_close_work [rtrs_server]
Call Trace:
? __schedule+0x38c/0x7e0
schedule+0x32/0x80
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.2+0x25e/0x4d0
? put_srv+0x44/0x100 [rtrs_server]
put_srv+0x44/0x100 [rtrs_server]
rtrs_srv_close_work+0x16c/0x280 [rtrs_server]
process_one_work+0x1c5/0x3c0
worker_thread+0x47/0x3e0
kthread+0xfc/0x130
? trace_event_raw_event_workqueue_execute_start+0xa0/0xa0
? kthread_create_on_node+0x70/0x70
ret_from_fork+0x1f/0x30
Let's move all the logics from __find_srv_and_get and __alloc_srv to
get_or_create_srv, and remove the two functions. Then it should be safe
for multiple processes to access the same srv since it is protected with
srv_mutex.
And since we don't want to allocate chunks with srv_mutex held, let's
check the srv->refcount after get srv because the chunks could not be
allocated yet.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-6-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When rtrs_rdma_conn_established returns error (non-zero value), the error
value is stored in con->cm_err and it cannot trigger
rtrs_rdma_error_recovery. Finally the error of rtrs_rdma_con_established
will be forgot.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It could happen two kworkers race with each other:
CPU0 CPU1
addr_resolver kworker reconnect kworker
rtrs_clt_rdma_cm_handler
rtrs_rdma_addr_resolved
create_con_cq_qp: s.dev_ref++
"s.dev_ref is 1"
wait in create_cm fails with TIMEOUT
destroy_con_cq_qp: --s.dev_ref
"s.dev_ref is 0"
destroy_con_cq_qp: sess->s.dev = NULL
rtrs_cq_qp_create -> create_qp(con, sess->dev->ib_pd...)
sess->dev is NULL, panic.
To fix the problem using mutex to serialize create_con_cq_qp and
destroy_con_cq_qp.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As run destroy_con_cq_qp many times doesn't work, remove the comments.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-3-jinpu.wang@cloud.ionos.com
Suggested-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We call destroy_con_cq_qp(con) in rtrs_rdma_addr_resolved() in case route
couldn't be resolved and then again in create_cm() because nothing
happens.
Don't call destroy_con_cq_qp from rtrs_rdma_addr_resolved, create_cm()
does the clean up already.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The doorbell needs to store PI information into QPC, so the RoCEE should
wait for the results of storing, that is, it needs two bus operations to
complete a doorbell. When ROCEE is in SDI mode, multiple doorbells may be
interlocked because the RoCEE can only handle bus operations serially. So a
flag to mark if HIP09 is working in SDI mode is added. When the SDI flag is
set, the ROCEE will ignore the PI information of the doorbell, continue to
fetch wqe and verify its validity by it's owner_bit.
Link: https://lore.kernel.org/r/1603195493-22741-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, iser target support max IO size of 16MiB by default. For some
adapters, allocating this amount of resources might reduce the total
number of possible connections that can be created. For those adapters,
it's preferred to reduce the max IO size to be able to create more
connections. Since there is no handshake procedure for max IO size in iser
protocol, set the default max IO size to 1MiB and add a module parameter
for enabling the option to control it for suitable adapters.
Fixes: 317000b926 ("IB/isert: allocate RW ctxs according to max IO size")
Link: https://lore.kernel.org/r/20201019094628.17202-1-mgurtovoy@nvidia.com
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code which limited the number of unacknowledged PSNs was incorrect.
The PSNs are limited to 24 bits and wrap back to zero from 0x00ffffff.
The test was computing a 32 bit value which wraps at 32 bits so that
qp->req.psn can appear smaller than the limit when it is actually larger.
Replace '>' test with psn_compare which is used for other PSN comparisons
and correctly handles the 24 bit size.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20201013170741.3590-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix to return error code PTR_ERR() from the error handling case instead of
0.
Fixes: 51aab12631 ("RDMA/core: Get xmit slave for LAG")
Link: https://lore.kernel.org/r/20201016075845.129562-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are two flows for handling RDMA_CM_EVENT_ROUTE_RESOLVED, either the
handler triggers a completion and another thread does rdma_connect() or
the handler directly calls rdma_connect().
In all cases rdma_connect() needs to hold the handler_mutex, but when
handler's are invoked this is already held by the core code. This causes
ULPs using the 2nd method to deadlock.
Provide a rdma_connect_locked() and have all ULPs call it from their
handlers.
Link: https://lore.kernel.org/r/0-v2-53c22d5c1405+33-rdma_connect_locking_jgg@nvidia.com
Reported-and-tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Fixes: 2a7cec5381 ("RDMA/cma: Fix locking for the RDMA_CM_CONNECT state")
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Only static WQE is supported for SRQ. So always use the max supported SGEs
while calculating SRQ entry size.
Fixes: 2bb3c32c5c ("RDMA/bnxt_re: Change wr posting logic to accommodate variable wqes")
Link: https://lore.kernel.org/r/1602569752-12745-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some drivers (such as EFA) have a GID table, but aren't IB/RoCE devices.
Remove the unnecessary rdma_ib_or_roce() check.
This fixes rdma-core failures for EFA when it uses the new ioctl interface
for querying the GID table.
Fixes: 9f85cbe50a ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/20201026082621.32463-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drivers that need a uverbs AH should instead set the create_user_ah() op
similar to reg_user_mr(). MODIFY_AH and QUERY_AH cmds were never
implemented so are just deleted.
Link: https://lore.kernel.org/r/11-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allowing userspace to invoke these commands is probably going to crash
these drivers as they are not tested and not expecting to use them on a
user object.
For example pvrdma touches cq->ring_state which is not initialized for
user QPs.
These commands are effected:
- IB_USER_VERBS_CMD_REQ_NOTIFY_CQ is ibv_cmd_req_notify_cq() in
rdma-core, only hfi1, ipath and rxe calls it.
- IB_USER_VERBS_CMD_POLL_CQ is ibv_cmd_poll_cq() in rdma-core, only
ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_POST_SEND/RECV is ibv_cmd_post_send/recv() in
rdma-core, only ipath and hfi1 call them.
- IB_USER_VERBS_CMD_POST_SRQ_RECV is ibv_cmd_post_srq_recv() in
rdma-core, only ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_PEEK_CQ isn't even implemented anywhere
- IB_USER_VERBS_CMD_CREATE/DESTROY_AH is ibv_cmd_create/destroy_ah() in
rdma-core, only bnxt_re, efa, hfi1, ipath, mlx5, orcrdma, and rxe call
it.
Link: https://lore.kernel.org/r/10-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No driver sets it, and the core code sets a maximum mask, simply remove
it.
Disabled operations are now handled either by having a NULL ops pointer,
or by having the common driver callbacks check for unsupported extended
attributes.
Link: https://lore.kernel.org/r/9-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the QP attrs create_flags is supported.
Unfortuantely when create_flags was added to the QP attrs the drivers were
not updated. uverbs_ex_cmd_mask was used to block it - even though kernel
drivers use these flags too.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code
to be EOPNOTSUPP.
Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the CQ attrs is supported. Unfortuantely
when flags was added to the CQ attrs the drivers were not updated,
uverbs_ex_cmd_mask was used to block it. This was missed when create CQ
was converted to ioctl, so non-zero flags could have been passed into
drivers.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask.
Fixes: 41b2a71fc8 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file")
Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that it can support the provided attr_mask during
modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block
modify_qp_ex because the driver didn't check RATE_LIMIT.
Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
uverbs was blocking srq_types the driver doesn't support based on the
CREATE_XSRQ cmd_mask. Fix all drivers to check for supported srq_types
during create_srq and move CREATE_XSRQ to the core code.
Link: https://lore.kernel.org/r/5-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions all depend on the driver providing a specific op:
- REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op
- ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this
without providing the op
- OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides
xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow.
- OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd()
- CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq()
- QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but
sometimes supplies a NULL op.
- RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op
- ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an
(now deleted) implementation but no userspace
All drivers were checked that no drivers provide the op without also
setting uverbs_cmd_mask so this should have no functional change.
Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since a while now the uverbs layer checks if the driver implements a
function before allowing the ucmd to proceed. This largely obsoletes the
cmd_mask stuff, but there is some tricky bits in drivers preventing it
from being removed.
Remove the easy elements of uverbs_ex_cmd_mask by pre-setting them in the
core code. These are triggered soley based on the related ops function
pointer.
query_device_ex is not triggered based on an op, but all drivers already
implement something compatible with the extension, so enable it globally
too.
Link: https://lore.kernel.org/r/2-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This driver never enabled IB_USER_VERBS_CMD_ALLOC_MW so memory windows
were not usable from userspace. The kernel side was removed long ago. Drop
this dead code.
Fixes: feb7c1e38b ("IB: remove in-kernel support for memory windows")
Link: https://lore.kernel.org/r/1-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The API for ib_query_qp requires the driver to set cur_qp_state on return,
add the missing set.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/20201021114952.38876-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a mlx5 core devlink instance is reloaded in different net namespace,
its associated IB device is deleted and recreated.
Example sequence is:
$ ip netns add foo
$ devlink dev reload pci/0000:00:08.0 netns foo
$ ip netns del foo
mlx5 IB device needs to attach and detach the netdevice to it through the
netdev notifier chain during load and unload sequence. A below call graph
of the unload flow.
cleanup_net()
down_read(&pernet_ops_rwsem); <- first sem acquired
ops_pre_exit_list()
pre_exit()
devlink_pernet_pre_exit()
devlink_reload()
mlx5_devlink_reload_down()
mlx5_unload_one()
[...]
mlx5_ib_remove()
mlx5_ib_unbind_slave_port()
mlx5_remove_netdev_notifier()
unregister_netdevice_notifier()
down_write(&pernet_ops_rwsem);<- recurrsive lock
Hence, when net namespace is deleted, mlx5 reload results in deadlock.
When deadlock occurs, devlink mutex is also held. This not only deadlocks
the mlx5 device under reload, but all the processes which attempt to
access unrelated devlink devices are deadlocked.
Hence, fix this by mlx5 ib driver to register for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.
Fixes: 4383cfcc65 ("net/mlx5: Add devlink reload")
Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The patch referenced below has a typo that results in using the wrong L2
header size for outbound traffic. (V4 <-> V6).
It also breaks kernel-side RC traffic because they use AVs that use
RDMA_NETWORK_XXX enums instead of RXE_NETWORK_TYPE_XXX enums. Fix this by
transcoding between these enum types.
Fixes: e0d696d201 ("RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI")
Link: https://lore.kernel.org/r/20201016211343.22906-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The typical set of driver updates across the subsystem:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns,
usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where MRA
wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail at
the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist
-----BEGIN PGP SIGNATURE-----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=LKpl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A usual cycle for RDMA with a typical mix of driver and core subsystem
updates:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
hns, usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where
MRA wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail
at the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using
it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
RDMA/ucma: Fix use after free in destroy id flow
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
RDMA: Explicitly pass in the dma_device to ib_register_device
lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
IB/mlx4: Convert rej_tmout radix-tree to XArray
RDMA/rxe: Fix bug rejecting all multicast packets
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
RDMA/rxe: Remove duplicate entries in struct rxe_mr
IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
IB/rdmavt: Fix sizeof mismatch
MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
RDMA/uverbs: Expose the new GID query API to user space
...
Merge more updates from Andrew Morton:
"155 patches.
Subsystems affected by this patch series: mm (dax, debug, thp,
readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
romfs, and fault-injection"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
lib, uaccess: add failure injection to usercopy functions
lib, include/linux: add usercopy failure capability
ROMFS: support inode blocks calculation
ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
sched.h: drop in_ubsan field when UBSAN is in trap mode
scripts/gdb/tasks: add headers and improve spacing format
scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
kernel/relay.c: drop unneeded initialization
panic: dump registers on panic_on_warn
rapidio: fix the missed put_device() for rio_mport_add_riodev
rapidio: fix error handling path
nilfs2: fix some kernel-doc warnings for nilfs2
autofs: harden ioctl table
ramfs: fix nommu mmap with gaps in the page cache
mm: remove the now-unnecessary mmget_still_valid() hack
mm/gup: take mmap_lock in get_dump_page()
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
coredump: rework elf/elf_fdpic vma_dump_size() into common helper
coredump: refactor page range dumping into common helper
coredump: let dump_emit() bail out on short writes
...
The preceding patches have ensured that core dumping properly takes the
mmap_lock. Thanks to that, we can now remove mmget_still_valid() and all
its users.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-8-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ucma_free_ctx() should call to __destroy_id() on all the connection requests
that have not been delivered to user space. Currently it calls on the
context itself and cause to use after free.
Fixes the trace:
BUG: Unable to handle kernel data access on write at 0x5deadbeef0000108
Faulting instruction address: 0xc0080000002428f4
Oops: Kernel access of bad area, sig: 11 [#1]
Call Trace:
[c000000207f2b680] [c00800000024280c] .__destroy_id+0x28c/0x610 [rdma_ucm] (unreliable)
[c000000207f2b750] [c0080000002429c4] .__destroy_id+0x444/0x610 [rdma_ucm]
[c000000207f2b820] [c008000000242c24] .ucma_close+0x94/0xf0 [rdma_ucm]
[c000000207f2b8c0] [c00000000046fbdc] .__fput+0xac/0x330
[c000000207f2b960] [c00000000015d48c] .task_work_run+0xbc/0x110
[c000000207f2b9f0] [c00000000012fb00] .do_exit+0x430/0xc50
[c000000207f2bae0] [c0000000001303ec] .do_group_exit+0x5c/0xd0
[c000000207f2bb70] [c000000000144a34] .get_signal+0x194/0xe30
[c000000207f2bc60] [c00000000001f6b4] .do_notify_resume+0x124/0x470
[c000000207f2bd60] [c000000000032484] .interrupt_exit_user_prepare+0x1b4/0x240
[c000000207f2be20] [c000000000010034] interrupt_return+0x14/0x1c0
Rename listen_ctx to conn_req_ctx as the poor name was the cause of this
bug.
Fixes: a1d33b70db ("RDMA/ucma: Rework how new connections are passed through event delivery")
Link: https://lore.kernel.org/r/20201012045600.418271-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If skb_clone() is unable to allocate memory for a new sk_buff this is not
detected by the current code.
Check for a NULL return and continue. This is similar to other errors in
this loop over QPs attached to the multicast address and consistent with
the unreliable UD transport.
Fixes: e7ec96fc79 ("RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()")
Addresses-Coverity-ID: 1497804: Null pointer dereferences (NULL_RETURNS)
Link: https://lore.kernel.org/r/20201013184236.5231-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
RXE was wrongly using an internal kernel enum as part of its uAPI, split
this out into a dedicated uAPI enum just for RXE. It only uses the IPv4
and IPv6 values.
This was exposed by changing the internal kernel enum definition which
broke RXE.
Fixes: 1c15b4f2a4 ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code in setup_dma_device has become rather convoluted, move all of
this to the drivers. Drives now pass in a DMA capable struct device which
will be used to setup DMA, or drivers must fully configure the ibdev for
DMA and pass in NULL.
Other than setting the masks in rvt all drivers were doing this already
anyhow.
mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for
DMA based on their hardweare limits in:
__mthca_init_one()
dma_set_max_seg_size (1G)
__mlx4_init_one()
dma_set_max_seg_size (1G)
mlx5_pci_init()
set_dma_caps()
dma_set_max_seg_size (2G)
Other non software drivers (except usnic) were extended to UINT_MAX [1, 2]
instead of 2G as was before.
[1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
[2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org
Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
From Maor Gottlieb says:
====================
This series extends __sg_alloc_table_from_pages to allow chaining of new
pages to an already initialized SG table.
This allows for drivers to utilize the optimization of merging contiguous
pages without a need to pre allocate all the pages and hold them in a very
large temporary buffer prior to the call to SG table initialization.
The last patch changes the Infiniband core to use the new API. It removes
duplicate functionality from the code and benefits from the optimization
of allocating dynamic SG table from pages.
In huge pages system of 2MB page size, without this change, the SG table
would contain x512 SG entries.
====================
* branch 'dynamic_sg':
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
Fix a bug in rxe_rcv() that causes all multicast packets to be
dropped. Currently rxe_match_dgid() is called for each packet to verify
that the destination IP address matches one of the entries in the port
source GID table. This is incorrect for IP multicast addresses since they
do not appear in the GID table.
Add code to detect multicast addresses.
Change function name to rxe_chk_dgid() which is clearer.
Link: https://lore.kernel.org/r/20201008212753.265249-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The changes referenced below replaced sbk_clone)_ by taking additional
references, passing the skb along and then freeing the skb. This
deleted the packets before they could be processed and additionally
passed bad data in each packet. Since pkt is stored in skb->cb
changing pkt->qp changed it for all the packets.
Replace skb_get() by sbk_clone() in rxe_rcv_mcast_pkt() for cases where
multiple QPs are receiving multicast packets on the same address.
Delete kfree_skb() because the packets need to live until they have been
processed by each QP. They are freed later.
Fixes: 86af617641 ("IB/rxe: remove unnecessary skb_clone")
Fixes: fe896ceb57 ("IB/rxe: replace refcount_inc with skb_get")
Link: https://lore.kernel.org/r/20201008203651.256958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Struct rxe_mem had pd, lkey and rkey values both in itself and in the
struct ib_mr which is also included in rxe_mem.
Delete these entries and replace references with the ones in ibmr.Add
mr_pd, mr_lkey and mr_rkey macros which extract these values from mr.
Link: https://lore.kernel.org/r/20201008212818.265303-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An incorrect sizeof is being used, struct rvt_ibport ** is not correct, it
should be struct rvt_ibport *. Note that since ** is the same size as
* this is not causing any issues. Improve this fix by using
sizeof(*rdi->ports) as this allows us to not even reference the type
of the pointer. Also remove line breaks as the entire statement can
fit on one line.
Link: https://lore.kernel.org/r/20201008095204.82683-1-colin.king@canonical.com
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: ff6acd6951 ("IB/rdmavt: Add device structure allocation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An incorrect sizeof is being used, u64 * is not correct, it should be just
u64 for a table of umem_pgs number of u64 items in the pbl_tbl. Use the
idiom sizeof(*pbl_tbl) to get the object type without the need to
explicitly use u64.
Link: https://lore.kernel.org/r/20201006114700.537916-1-colin.king@canonical.com
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This driver is taking the SGL out of the umem and passing it through a
struct bnxt_qplib_sg_info. Instead of passing the SGL pass the umem and
then use rdma_umem_for_each_dma_block() directly.
Move the calls of ib_umem_num_dma_blocks() closer to their actual point of
use, npages is only set for non-umem pbl flows.
Link: https://lore.kernel.org/r/0-v1-b37437a73f35+49c-bnxt_re_dma_block_jgg@nvidia.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
'struct percpu_ref' is often embedded into one user structure, and the
instance is usually referenced in fast path, however actually only
'percpu_count_ptr' is needed in fast path.
So move other fields into one new structure of 'percpu_ref_data', and
allocate it dynamically via kzalloc(), then memory footprint of
'percpu_ref' in fast path is reduced a lot and becomes suitable to put
into hot cacheline of user structure.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Veronika Kabatova <vkabatov@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the implementation of ib_umem_add_sg_table and instead
call to __sg_alloc_table_from_pages which already has the logic to
merge contiguous pages.
Besides that it removes duplicated functionality, it reduces the
memory consumption of the SG table significantly. Prior to this
patch, the SG table was allocated in advance regardless consideration
of contiguous pages.
In huge pages system of 2MB page size, without this change, the SG table
would contain x512 SG entries.
E.g. for 100GB memory registration:
Number of entries Size
Before 26214400 600.0MB
After 51200 1.2MB
Link: https://lore.kernel.org/r/20201004154340.1080481-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull networking fixes from David Miller:
1) Make sure SKB control block is in the proper state during IPSEC
ESP-in-TCP encapsulation. From Sabrina Dubroca.
2) Various kinds of attributes were not being cloned properly when we
build new xfrm_state objects from existing ones. Fix from Antony
Antony.
3) Make sure to keep BTF sections, from Tony Ambardar.
4) TX DMA channels need proper locking in lantiq driver, from Hauke
Mehrtens.
5) Honour route MTU during forwarding, always. From Maciej
Żenczykowski.
6) Fix races in kTLS which can result in crashes, from Rohit
Maheshwari.
7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan
Jha.
8) Use correct address family in xfrm state lookups, from Herbert Xu.
9) A bridge FDB flush should not clear out user managed fdb entries
with the ext_learn flag set, from Nikolay Aleksandrov.
10) Fix nested locking of netdev address lists, from Taehee Yoo.
11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau.
12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit.
13) Don't free command entries in mlx5 while comp handler could still be
running, from Eran Ben Elisha.
14) Error flow of request_irq() in mlx5 is busted, due to an off by one
we try to free and IRQ never allocated. From Maor Gottlieb.
15) Fix leak when dumping netlink policies, from Johannes Berg.
16) Sendpage cannot be performed when a page is a slab page, or the page
count is < 1. Some subsystems such as nvme were doing so. Create a
"sendpage_ok()" helper and use it as needed, from Coly Li.
17) Don't leak request socket when using syncookes with mptcp, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net/core: check length before updating Ethertype in skb_mpls_{push,pop}
net: mvneta: fix double free of txq->buf
net_sched: check error pointer in tcf_dump_walker()
net: team: fix memory leak in __team_options_register
net: typhoon: Fix a typo Typoon --> Typhoon
net: hinic: fix DEVLINK build errors
net: stmmac: Modify configuration method of EEE timers
tcp: fix syn cookied MPTCP request socket leak
libceph: use sendpage_ok() in ceph_tcp_sendpage()
scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
tcp: use sendpage_ok() to detect misused .sendpage
nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
net: introduce helper sendpage_ok() in include/linux/net.h
net: usb: pegasus: Proper error handing when setting pegasus' MAC address
net: core: document two new elements of struct net_device
netlink: fix policy dump leak
net/mlx5e: Fix race condition on nhe->n pointer in neigh update
net/mlx5e: Fix VLAN create flow
...
Report the "ipoib pkey", "mode" and "umcast" netlink attributes for every
IPoiB interface type, not just children created with 'ip link add'.
After setting the rtnl_link_ops for the parent interface, implement the
dellink() callback to block users from trying to remove it.
Fixes: 862096a8bb ("IB/ipoib: Add more rtnl_link_ops callbacks")
Link: https://lore.kernel.org/r/20201004132948.26669-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose the query GID table and entry API to user space by adding two new
methods and method handlers to the device object.
This API provides a faster way to query a GID table using single call and
will be used in libibverbs to improve current approach that requires
multiple calls to open, close and read multiple sysfs files for a single
GID table entry.
Link: https://lore.kernel.org/r/20200923165015.2491894-5-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce rdma_query_gid_table which enables querying all the GID tables
of a given device and copying the attributes of all valid GID entries to a
provided buffer.
This API provides a faster way to query a GID table using single call and
will be used in libibverbs to improve current approach that requires
multiple calls to open, close and read multiple sysfs files for a single
GID table entry.
Link: https://lore.kernel.org/r/20200923165015.2491894-4-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Separate IB_GID_TYPE_IB and IB_GID_TYPE_ROCE to two different values, so
enum ib_gid_type will match the gid types of the new query GID table API
which will be introduced in the following patches.
This change in enum ib_gid_type requires to change also enum
rdma_network_type by separating RDMA_NETWORK_IB and RDMA_NETWORK_ROCE_V1
values.
Link: https://lore.kernel.org/r/20200923165015.2491894-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change the error code returned from rdma_get_gid_attr when the GID entry
is invalid but the GID index is in the gid table size range to -ENODATA
instead of -EINVAL.
This change is done in order to provide a more accurate error reporting to
be used by the new GID query API in user space. Nevertheless, -EINVAL is
still returned from sysfs in the aforementioned case to maintain
compatibility with user space that expects -EINVAL.
Link: https://lore.kernel.org/r/20200923165015.2491894-2-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Making a change to fix following sparse warnings reported by kbuild bot.
CHECK drivers/infiniband/hw/qedr/verbs.c
drivers/infiniband/hw/qedr/verbs.c:3872:59: warning: incorrect type in assignment (different base types)
drivers/infiniband/hw/qedr/verbs.c:3872:59: expected restricted __le32 [usertype] sge_prod
drivers/infiniband/hw/qedr/verbs.c:3872:59: got unsigned int [usertype] sge_prod
drivers/infiniband/hw/qedr/verbs.c:3875:59: warning: incorrect type in assignment (different base types)
drivers/infiniband/hw/qedr/verbs.c:3875:59: expected restricted __le32 [usertype] wqe_prod
drivers/infiniband/hw/qedr/verbs.c:3875:59: got unsigned int [usertype] wqe_prod
Link: https://lore.kernel.org/r/20201001100959.19940-1-palok@marvell.com
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: acca72e2b0 ("RDMA/qedr: SRQ's bug fixes")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The only usage of these is to pass their address to sysfs_create_group()
and sysfs_remove_group(), both which takes const pointers. Make it const
to allow the compiler to put them in read-only memory.
Link: https://lore.kernel.org/r/20200930224004.24279-3-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The only usage of the pma_table field in the ib_port struct is to pass its
address to sysfs_create_group() and sysfs_remove_group(). Make it const to
make it possible to constify a couple of static struct
attribute_group. This allows the compiler to put them in read-only memory.
Link: https://lore.kernel.org/r/20200930224004.24279-2-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Sync device with CPU pages upon ODP MR registration. mlx5 already has to
zero the HW's version of the PAS list, may as well deliver a PAS list that
matches the current CPU page tables configuration.
Link: https://lore.kernel.org/r/20200930163828.1336747-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend advice MR to support non faulting mode, this can improve
performance by increasing the populated page tables in the device.
Link: https://lore.kernel.org/r/20200930163828.1336747-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Enable ODP sync without faulting, this improves performance by reducing
the number of page faults in the system.
The gain from this option is that the device page table can be aligned
with the presented pages in the CPU page table without causing page
faults.
As of that, the overhead on data path from hardware point of view to
trigger a fault which end-up by calling the driver to bring the pages
will be dropped.
Link: https://lore.kernel.org/r/20200930163828.1336747-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move to use hmm_range_fault() instead of get_user_pags_remote() to improve
performance in a few aspects:
This includes:
- Dropping the need to allocate and free memory to hold its output
- No need any more to use put_page() to unpin the pages
- The logic to detect contiguous pages is done based on the returned
order, no need to run per page and evaluate.
In addition, moving to use hmm_range_fault() enables to reduce page faults
in the system with it's snapshot mode, this will be introduced in next
patches from this series.
As part of this, cleanup some flows and use the required data structures
to work with hmm_range_fault().
Link: https://lore.kernel.org/r/20200930163828.1336747-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This three thread race can result in the work being run once the callback
becomes NULL:
CPU1 CPU2 CPU3
netevent_callback()
process_one_req() rdma_addr_cancel()
[..]
spin_lock_bh()
set_timeout()
spin_unlock_bh()
spin_lock_bh()
list_del_init(&req->list);
spin_unlock_bh()
req->callback = NULL
spin_lock_bh()
if (!list_empty(&req->list))
// Skipped!
// cancel_delayed_work(&req->work);
spin_unlock_bh()
process_one_req() // again
req->callback() // BOOM
cancel_delayed_work_sync()
The solution is to always cancel the work once it is completed so any
in between set_timeout() does not result in it running again.
Cc: stable@vger.kernel.org
Fixes: 44e75052bc ("RDMA/rdma_cm: Make rdma_addr_cancel into a fence")
Link: https://lore.kernel.org/r/20200930072007.1009692-1-leon@kernel.org
Reported-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Nothing reads this any more, and the reason for its existence has passed
due to the deferred fput() scheme.
Fixes: 8ea1f989aa ("drivers/IB,usnic: reduce scope of mmap_sem")
Link: https://lore.kernel.org/r/0-v1-df64ff042436+42-uctx_closing_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some code was removed but the variables were still there, and some
parameters have been changed to be queried from firmware. So the
definitions of them are no longer needed.
Fixes: 2a3d923f87 ("RDMA/hns: Replace magic numbers with #defines")
Fixes: 82e620d9c3 ("RDMA/hns: Modify the data structure of hns_roce_av")
Fixes: 8254746978 ("IB/hns: Implement the add_gid/del_gid and optimize the GIDs management")
Fixes: 21b97f5387 ("RDMA/hns: Fixup qp release bug")
Link: https://lore.kernel.org/r/1601371934-40003-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no real need to have an intermediate pointer for the same struct,
remove it, and use struct directly.
Link: https://lore.kernel.org/r/20200926102450.2966017-11-leon@kernel.org
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As preparation for the removal of QP allocation logic, we need to ensure
that ib_core allocates the right amount of memory before a call to the
driver create_qp(). It requires from driver to have the same structs for
all types of QPs.
Link: https://lore.kernel.org/r/20200926102450.2966017-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GSI QP can't be created from the user space, hence the udata check is
always false (udata == NULL). Remove that check and simplify the flow.
Link: https://lore.kernel.org/r/20200926102450.2966017-9-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ioctl flow checks that the user provides only a supported list of QP
types, while write flow didn't do it and relied on the driver to check
it. Align those flows to fail as early as possible.
Link: https://lore.kernel.org/r/20200926102450.2966017-8-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since all mlx4 QP have same storage type, move the QP allocation to be in
one place. This change is preparation to removal of such allocation from
the driver.
Link: https://lore.kernel.org/r/20200926102450.2966017-7-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor the storage struct of mlx4 GSI QP to be embedded in mlx4_ib
QP. This allows to remove internal memory allocation of QP struct which is
hidden inside the mlx4_ib_create_qp() flow.
Link: https://lore.kernel.org/r/20200926102450.2966017-6-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GSI QP doesn't need signal QP type because it is initialized statically to
zero, which is IB_SIGNAL_ALL_WR also wr->send_flags isn't set too. This
means that the GSI QP signal QP type can be removed.
Link: https://lore.kernel.org/r/20200926102450.2966017-5-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no reason to have separate create flow for the GSI QP, while
general create_qp routine has all needed checks and ability to allocate
and free the proper struct mlx5_ib_qp.
Link: https://lore.kernel.org/r/20200926102450.2966017-4-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove duplication of mlx5_ib_qp and mlx5_ib_gsi_qp fields. This change
returns the memory footprint of mlx5_ib QP to be as it was before
embedding GSI QP.
Link: https://lore.kernel.org/r/20200926102450.2966017-3-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The GSI QPs have different create flow from the regular QPs, but it is not
really needed. Update the code to use mlx5_ib_qp as a storage class for
all outside of GSI calls.
Link: https://lore.kernel.org/r/20200926102450.2966017-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Functions related to nested interface infrastructure such as
netdev_walk_all_{ upper | lower }_dev() pass both private functions
and "data" pointer to handle their own things.
At this point, the data pointer type is void *.
In order to make it easier to expand common variables and functions,
this new netdev_nested_priv structure is added.
In the following patch, a new member variable will be added into this
struct to fix the lockdep issue.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sizeof() when applied to a pointer typed expression should give the size
of the pointed data, even if the data is a pointer.
Fixes: e1f24a79f4 ("IB/mlx5: Support congestion related counters")
Link: https://lore.kernel.org/r/20200917081354.2083293-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 supports RC inline up to size of 32 Bytes, and all data should be
put into SQWQE. For HIP09, this capability is extended to 1024 Bytes, if
length of data is longer than 32 Bytes, they will be filled into extended
sge space.
Link: https://lore.kernel.org/r/1599744069-9968-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hardware will add AckReq flag in BTH header according to the value of
ack_req_freq to request ACK from responder for the packets with this flag.
It should be greater than or equal to lp_pktn_ini instead of using a fixed
value.
Fixes: 7b9bd73ed1 ("RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC")
Link: https://lore.kernel.org/r/1600509802-44382-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rnr_retry returned to the user is not correct, it should be got from
another fields in QPC.
Fixes: bfe860351e ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1600509802-44382-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
calc_pg_sz() may gets a data calculation overflow if the PAGE_SIZE is 64 KB
and hop_num is 2. It is because that all variables involved in calculation
are defined in type of int. So change the type of bt_chunk_size,
buf_chunk_size and obj_per_chunk_default to u64.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1600509802-44382-6-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the the value of sl is larger than 7, if so,
an exception should be returned.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-5-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 doesn't support modifying the maximum number of outstanding WR in an
SRQ. However, the driver does not return a failure message, and users may
mistakenly think that the resizing is executed successfully. So the driver
needs to intercept this operation.
Fixes: ffb1308b88 ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1600509802-44382-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB specifications, the verbs should return an immediate
error when the users set an unsupported opcode. Furthermore, refactor codes
about opcode in process of post_send to make the difference between opcodes
clearer.
Link: https://lore.kernel.org/r/1600509802-44382-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For HIP09, size of SCCC (Soft Congestion Control Context) is increased to
64 Bytes from 32 Bytes. The hardware will get the configuration of SCCC
from driver instead of using a fixed value.
Link: https://lore.kernel.org/r/1600245806-56321-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using QPC in size of 256B or 512B, so
that HIP09 can supports new congestion control algorithms by using QPC in
larger size.
Link: https://lore.kernel.org/r/1600245806-56321-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.
Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using CEQE in size of 4B or 64B, AEQE in
size of 16B or 64B. The performance of bus can be improved by using larger
size of EQE.
Link: https://lore.kernel.org/r/1600245806-56321-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sg_init_table() zeroes its first argument, so the allocation of that
argument doesn't have to.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(*x),flags)
...
sg_init_table(x,n)
// </smpl>
Link: https://lore.kernel.org/r/1600601186-7420-6-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Occasionally ib_write_bw crash is seen due to access of a pd object in
i40iw_sc_qp_destroy after it is freed. Destroy qp is not synchronous in
i40iw and thus the iwqp object could be referencing a pd object that is
freed by ib core as a result of successful return from i40iw_destroy_qp.
Wait in i40iw_destroy_qp till all QP references are released and destroy
the QP and its associated resources before returning. Switch to use the
refcount API vs atomic API for lifetime management of the qp.
RIP: 0010:i40iw_sc_qp_destroy+0x4b/0x120 [i40iw]
[...]
RSP: 0018:ffffb4a7042e3ba8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000001 RCX: dead000000000122
RDX: ffffb4a7042e3bac RSI: ffff8b7ef9b1e940 RDI: ffff8b7efbf09080
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 8080808080808080 R11: 0000000000000010 R12: ffff8b7efbf08050
R13: 0000000000000001 R14: ffff8b7f15042928 R15: ffff8b7ef9b1e940
FS: 0000000000000000(0000) GS:ffff8b7f2fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000400 CR3: 000000020d60a006 CR4: 00000000001606e0
Call Trace:
i40iw_exec_cqp_cmd+0x4d3/0x5c0 [i40iw]
? try_to_wake_up+0x1ea/0x5d0
? __switch_to_asm+0x40/0x70
i40iw_process_cqp_cmd+0x95/0xa0 [i40iw]
i40iw_handle_cqp_op+0x42/0x1a0 [i40iw]
? cm_event_handler+0x13c/0x1f0 [iw_cm]
i40iw_rem_ref+0xa0/0xf0 [i40iw]
cm_work_handler+0x99c/0xd10 [iw_cm]
process_one_work+0x1a1/0x360
worker_thread+0x30/0x380
? process_one_work+0x360/0x360
kthread+0x10c/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x35/0x40
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Link: https://lore.kernel.org/r/20200916131811.2077-1-shiraz.saleem@intel.com
Reported-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Sindhu, Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add separate stats types for send messages and RDMA read work requests.
Link: https://lore.kernel.org/r/20200915141449.8428-3-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The keep alive received counter is a software stat, keep it grouped with
all other software stats. Since all stored stats are software stats,
remove the efa_sw_stats struct and use efa_stats instead.
Link: https://lore.kernel.org/r/20200915141449.8428-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use rdma_restrack_set_name() and rdma_restrack_parent_name() instead of
tricky uses of rdma_restrack_attach_task()/rdma_restrack_uadd().
This uniformly makes all restracks add'd using rdma_restrack_add().
Link: https://lore.kernel.org/r/20200922091106.2152715-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have a single rdma_restrack_add() that adds an entry, there is no reason
to split the user/kernel here, the rdma_restrack_set_task() is responsible
for this difference.
This patch prepares the code to the future requirement of making restrack
is mandatory for managing ib objects.
Link: https://lore.kernel.org/r/20200922091106.2152715-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor the restrack code to make sure the kref inside the restrack entry
properly kref's the object in which it is embedded. This slight change is
needed for future conversions of MR and QP which are refcounted before the
release and kfree.
The ideal flow from ib_core perspective as follows:
* Allocate ib_* structure with rdma_zalloc_*.
* Set everything that is known to ib_core to that newly created object.
* Initialize kref with restrack help
* Call to driver specific allocation functions.
* Insert into restrack DB
....
* Return and release restrack with restrack_put.
Largely this means a rdma_restrack_new() should be called near allocating
the containing structure.
Link: https://lore.kernel.org/r/20200922091106.2152715-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The restrack is going to manage memory of all IB objects and must be
called before object is created. GSI QP in the mlx5_ib separated between
creating dummy interface and HW object beneath. This was achieved by
double call to ib_create_qp().
In order to skip such reentry call to internal driver create_qp code.
Link: https://lore.kernel.org/r/20200922091106.2152715-3-leon@kernel.org
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update the code to have similar destroy pattern like other IB objects.
This change create asymmetry to the rdma_id_private create flow to make
sure that memory is managed by restrack.
Link: https://lore.kernel.org/r/20200922091106.2152715-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ucma_destroy_id() assumes that all things accessing the ctx will do so via
the xarray. This assumption violated only in the case the FD is being
closed, then the ctx is reached via the ctx_list. Normally this is OK
since ucma_destroy_id() cannot run concurrenty with release(), however
with ucma_migrate_id() is involved this can violated as the close of the
2nd FD can run concurrently with destroy on the first:
CPU0 CPU1
ucma_destroy_id(fda)
ucma_migrate_id(fda -> fdb)
ucma_get_ctx()
xa_lock()
_ucma_find_context()
xa_erase()
xa_unlock()
xa_lock()
ctx->file = new_file
list_move()
xa_unlock()
ucma_put_ctx()
ucma_close(fdb)
_destroy_id()
kfree(ctx)
_destroy_id()
wait_for_completion()
// boom, ctx was freed
The ctx->file must be modified under the handler and xa_lock, and prior to
modification the ID must be rechecked that it is still reachable from
cur_file, ie there is no parallel destroy or migrate.
To make this work remove the double locking and streamline the control
flow. The double locking was obsoleted by the handler lock now directly
preventing new uevents from being created, and the ctx_list cannot be read
while holding fgets on both files. Removing the double locking also
removes the need to check for the same file.
Fixes: 88314e4dda ("RDMA/cma: add support for rdma_migrate_id()")
Link: https://lore.kernel.org/r/0-v1-05c5a4090305+3a872-ucma_syz_migrate_jgg@nvidia.com
Reported-and-tested-by: syzbot+cc6fc752b3819e082d0c@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Once a mkey is created it can be modified using UMR. This is desirable for
performance reasons. However, different hardware has restrictions on what
modifications are possible using UMR. Make sense of these checks:
- mlx5_ib_can_reconfig_with_umr() returns true if the access flags can be
altered. Most cases create MRs using 0 access flags (now made clear by
consistent use of set_mkc_access_pd_addr_fields()), but the old logic
here was tormented. Make it clear that this is checking if the current
access_flags can be modified using UMR to different access_flags. It is
always OK to use UMR to change flags that all HW supports.
- mlx5_ib_can_load_pas_with_umr() returns true if UMR can be used to
enable and update the PAS/XLT. Enabling requires updating the entity
size, so UMR ends up completely disabled on this old hardware. Make it
clear why it is disabled. FRWR, ODP and cache always requires
mlx5_ib_can_load_pas_with_umr().
- mlx5_ib_pas_fits_in_mr() is used to tell if an existing MR can be
resized to hold a new PAS list. This only works for cached MR's because
we don't store the PAS list size in other cases.
To be very clear, arrange things so any pre-created MR's in the cache
check the newly requested access_flags before allowing the MR to leave the
cache. If UMR cannot set the required access_flags the cache fails to
create the MR.
This in turn means relaxed ordering and atomic are now correctly blocked
early for implicit ODP on older HW.
Link: https://lore.kernel.org/r/20200914112653.345244-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
set_reg_wr() always fails if !umr_modify_entity_size_disabled because
mlx5_ib_can_use_umr() always fails. Without set_reg_wr() IB_WR_REG_MR
doesn't work and that means the device should not advertise
IB_DEVICE_MEM_MGT_EXTENSIONS.
Fixes: 841b07f99a ("IB/mlx5: Block MR WR if UMR is not possible")
Link: https://lore.kernel.org/r/20200914112653.345244-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Any mkey that is not enabled and assigned to userspace should have the PD
set to a kernel owned PD.
When cache entries are created for the first time the PDN is set to 0,
which is probably a kernel PD, but be explicit.
When a MR is registered using the hybrid reg_create with UMR xlt & enable
the disabled mkey is pointing at the user PD, keep it pointing at the
kernel until a UMR enables it and sets the user PD.
Fixes: 9ec4483a3f ("IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache")
Link: https://lore.kernel.org/r/20200914112653.345244-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
alloc_mr_from_cache() no longer returns EAGAIN, this is just dead code
now.
Fixes: aad719dcf3 ("RDMA/mlx5: Allow MRs to be created in the cache synchronously")
Link: https://lore.kernel.org/r/20200914112653.345244-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hip06 does not support IB_WR_LOCAL_INV, so the ps_opcode should be set to
an invalid value instead of being left uninitialized.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Fixes: a2f3d4479f ("RDMA/hns: Avoid unncessary initialization")
Link: https://lore.kernel.org/r/1600350615-115217-1-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When xa_insert() fails, the acquired resource in qedr_create_qp should
also be freed. However, current implementation does not handle the error.
Fix this by adding a new goto label that calls qedr_free_qp_resources.
Fixes: 1212767e23 ("qedr: Add wrapping generic structure for qpidr and adjust idr routines.")
Link: https://lore.kernel.org/r/20200911125159.4577-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Receive side delayed ack mode is needed only for certain area networks/
connections. Therefore disable it by default.
Link: https://lore.kernel.org/r/20200909153707.2795-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
This series from Alex extends software steering interface to support
devices with extra capability "sw_owner_2" which will replace existing
"sw_owner".
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_sw_owner_v2:
RDMA/mlx5: Expose TIR and QP ICM address for sw_owner_v2 devices
RDMA/mlx5: Allow DM allocation for sw_owner_v2 enabled devices
RDMA/mlx5: Add sw_owner_v2 bit capability
Leon Romanovsky says:
====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_active_speed':
RDMA: Fix link active_speed size
RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
net/mlx5: Refactor query port speed functions
According to the IB spec active_speed size should be u16 and not u8 as
before. Changing it to allow further extensions in offered speeds.
Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose the ICM address to access TIR and QP, this will allow sw_owned_v2
devices to steer traffic to TIRs and QPs same as done with sw_owner
capability.
Link: https://lore.kernel.org/r/20200903073857.1129166-4-leon@kernel.org
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sw_owner_v2 will replace sw_owner for future devices, this means that if
sw_owner_v2 is set sw_owner should be ignored and DM allocation is
required for sw_owner_v2 devices to function.
Link: https://lore.kernel.org/r/20200903073857.1129166-3-leon@kernel.org
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move allocation and destruction of memory windows under ib_core
responsibility and clean drivers to ensure that no updates to MW
ib_core structures are done in driver layer.
Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Combine two same enums to avoid duplication.
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The functions mlx5_query_port_link_width_oper and
mlx5_query_port_ib_proto_oper are always called together, so combine them
to a new function called mlx5_query_port_oper to avoid duplication.
And while the mlx5i_get_port_settings is the same as
mlx5_query_port_oper therefore let's remove it.
According to the IB spec link_width_oper and ib_proto_oper should be u16
and not as written u8, so perform casting as a preparation to cross-RDMA
patch which will fix that type for all drivers in the RDMA subsystem.
Fixes: ada68c31ba ("net/mlx5: Introduce a new header file for physical port functions")
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The roce path triggers a work queue that continues to touch the id_priv
but doesn't hold any reference on it. Futher, unlike in the IB case, the
work queue is not fenced during rdma_destroy_id().
This can trigger a use after free if a destroy is triggered in the
incredibly narrow window after the queue_work and the work starting and
obtaining the handler_mutex.
The only purpose of this work queue is to run the ULP event callback from
the standard context, so switch the design to use the existing
cma_work_handler() scheme. This simplifies quite a lot of the flow:
- Use the cma_work_handler() callback to launch the work for roce. This
requires generating the event synchronously inside the
rdma_join_multicast(), which in turn means the dummy struct
ib_sa_multicast can become a simple stack variable.
- cm_work_handler() used the id_priv kref, so we can entirely eliminate
the kref inside struct cma_multicast. Since the cma_multicast never
leaks into an unprotected work queue the kfree can be done at the same
time as for IB.
- Eliminating the general multicast.ib requires using cma_set_mgid() in a
few places to recompute the mgid.
Fixes: 3c86aa70bf ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/20200902081122.745412-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Two places were open coding this sequence, and also pull in
cma_leave_roce_mc_group() which was called only once.
Link: https://lore.kernel.org/r/20200902081122.745412-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no kernel user of RDMA CM multicast so this code managing the
multicast subscription of the kernel-only internal QP is dead. Remove it.
This makes the bug fixes in the next patches much simpler.
Link: https://lore.kernel.org/r/20200902081122.745412-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These are the same thing, except that cma_ndev_work doesn't have a state
transition. Signal no state transition by setting old_state and new_state
== 0.
In all cases the handler function should not be called once
rdma_destroy_id() has progressed passed setting the state.
Link: https://lore.kernel.org/r/20200902081122.745412-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The only place that still uses it is rdma_join_multicast() which is only
doing a sanity check that the caller hasn't done something wrong and
doesn't need the spinlock.
At least in the case of rdma_join_multicast() the information it needs
will remain until the ID is destroyed once it enters these
states. Similarly there is no reason to check for these specific states in
the handler callback, instead use the usual check for a destroyed id under
the handler_mutex.
Link: https://lore.kernel.org/r/20200902081122.745412-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is a strange unlocked read of the ID state when checking for
reuseaddr. This is because an ID cannot be reusable once it becomes a
listening ID. Instead of using the state to exclude reuse, just clear it
as part of rdma_listen()'s flow to convert reusable into not reusable.
Once a ID goes to listen there is no way back out, and the only use of
reusable is on the bind_list check.
Finally, update the checks under handler_mutex to use READ_ONCE and audit
that once RDMA_CM_LISTEN is observed in a req callback it is stable under
the handler_mutex.
Link: https://lore.kernel.org/r/20200902081122.745412-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Re-organize things so the state variable is not read unlocked. The first
attempt to go directly from ADDR_BOUND immediately tells us if the ID is
already bound, if we can't do that then the attempt inside
rdma_bind_addr() to go from IDLE to ADDR_BOUND confirms the ID needs
binding.
Link: https://lore.kernel.org/r/20200902081122.745412-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is currently a bit confusing, but the design is if the handler_mutex
is held, and the state is in RDMA_CM_CONNECT, then the state cannot leave
RDMA_CM_CONNECT without also serializing with the handler_mutex.
Make this clearer by adding a direct assertion, fixing the usage in
rdma_connect and generally using READ_ONCE to read the state value.
Link: https://lore.kernel.org/r/20200902081122.745412-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hw_context stores a pci_device pointer. Use the correct type instead of
void * and avoid typecasts.
Link: https://lore.kernel.org/r/20200914123528.270382-1-parav@mellanox.com
Signed-off-by: Parav Pandit <parav@nvidia.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the XRC specific verbs. The additional QP type introduced new
logic to the rest of the verbs that now require distinguishing whether a
QP has an "RQ" or an "SQ" or both.
Link: https://lore.kernel.org/r/20200722102339.30104-1-ybason@marvell.com
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Basson <ybason@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe will hold a refcount on the IB device as long as CQ objects exist,
this causes destruction of a rxe device to hang if the CQ pool has any
cached CQs since they are being destroyed after the refcount must go to
zero.
Treat the CQ pool like a client and create/destroy it before/after all
other clients. No users of CQ pool can exist past a client remove call.
Link: https://lore.kernel.org/r/e8a240aa-9e9b-3dca-062f-9130b787f29b@acm.org
Fixes: c7ff819aef ("RDMA/core: Introduce shared CQ pool API")
Tested-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A number of driver bug fixes and a few recent regressions:
- Several bug fixes for bnxt_re. Crashing, incorrect data reported,
and corruption on new HW
- Memory leak and crash in rxe
- Fix sysfs corruption in rxe if the netdev name is too long
- Fix a crash on error unwind in the new cq_pool code
- Fix kobject panics in rtrs by working device lifetime properly
- Fix a data corruption bug in iser target related to misaligned buffers
-----BEGIN PGP SIGNATURE-----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=2DDd
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A number of driver bug fixes and a few recent regressions:
- Several bug fixes for bnxt_re. Crashing, incorrect data reported,
and corruption on new HW
- Memory leak and crash in rxe
- Fix sysfs corruption in rxe if the netdev name is too long
- Fix a crash on error unwind in the new cq_pool code
- Fix kobject panics in rtrs by working device lifetime properly
- Fix a data corruption bug in iser target related to misaligned
buffers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/isert: Fix unaligned immediate-data handling
RDMA/rtrs-srv: Set .release function for rtrs srv device during device init
RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx'
RDMA/core: Fix reported speed and width
RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ
RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds
RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address
RDMA/bnxt_re: Restrict the max_gids to 256
RDMA/bnxt_re: Static NQ depth allocation
RDMA/bnxt_re: Fix the qp table indexing
RDMA/bnxt_re: Do not report transparent vlan from QP1
RDMA/mlx4: Read pkey table length instead of hardcoded value
RDMA/rxe: Fix panic when calling kmem_cache_create()
RDMA/rxe: Fix memleak in rxe_mem_init_user
RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars
RDMA/rtrs-srv: Replace device_register with device_initialize and device_add
commit 59e8970b37 ("RDMA/qedr: Return max inline data in QP query
result") changed query_qp max_inline size to return the max roce inline
size. When iwarp was introduced, this should have been modified to return
the max inline size based on protocol. This size is cached in the device
attributes
Fixes: 69ad0e7fe8 ("RDMA/qedr: Add support for iWARP in user space")
Link: https://lore.kernel.org/r/20200902165741.8355-8-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently iWARP does not support mtu-change. Notify user when MTU changes
that reload of qedr is required for mtu to change. Display the correct
active mtu.
Fixes: f5b1b1775b ("RDMA/qedr: Add iWARP support in existing verbs")
Link: https://lore.kernel.org/r/20200902165741.8355-7-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In iWARP, accept could be called after a QP is already destroyed. In this
case an error should be returned and not success.
Fixes: 82af6d19d8 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr")
Link: https://lore.kernel.org/r/20200902165741.8355-5-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change the doorbell setting so that the maximum value between the last and
current value is set. This is to avoid doorbells being lost.
Fixes: a7efd7773e ("qedr: Add support for PD,PKEY and CQ verbs")
Link: https://lore.kernel.org/r/20200902165741.8355-3-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is always the same value as IOVA masked by the page size, just use
that clearer calculation directly.
It is unclear of ocrdma hardware can actually support a true fbo, if so it
could use a different algorithm to compute the best page size.
Link: https://lore.kernel.org/r/17-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
zbva is always false, so fbo is never read.
A 'zero-based-virtual-address' is simply IOVA == 0, and the driver already
supports this.
Link: https://lore.kernel.org/r/16-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For the calls linked to mlx4_ib_umem_calc_optimal_mtt_size() use
ib_umem_num_dma_blocks() inside the function, it is just some weird static
default.
All other places are just using it with PAGE_SIZE, switch to
ib_umem_num_dma_blocks().
As this is the last call site, remove ib_umem_num_count().
Link: https://lore.kernel.org/r/15-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This driver always uses a DMA array made up of PAGE_SIZE elements, so just
use ib_umem_num_dma_blocks().
Since rdma_for_each_dma_block() always iterates exactly
ib_umem_num_dma_blocks() there is no need for the early exit check in
build_user_pbes(), delete it.
Link: https://lore.kernel.org/r/13-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mtr_umem_page_count() does the same thing, replace it with the core code.
Also, ib_umem_find_best_pgsz() should always be called to check that the
umem meets the page_size requirement. If there is a limited set of
page_sizes that work it the pgsz_bitmap should be set to that set. 0 is a
failure and the umem cannot be used.
Lightly tidy the control flow to implement this flow properly.
Link: https://lore.kernel.org/r/12-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_umem_page_count() returns the number of 4k entries required for a DMA
map, but bnxt_re already computes a variable page size. The correct API to
determine the size of the page table array is ib_umem_num_dma_blocks().
Fix the overallocation of the page array in fill_umem_pbl_tbl() when
working with larger page sizes by using the right function. Lightly
re-organize this function to make it clearer.
Replace the other calls to ib_umem_num_pages().
Fixes: d85582517e ("RDMA/bnxt_re: Use core helpers to get aligned DMA address")
Link: https://lore.kernel.org/r/11-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The length of the list populated by qedr_populate_pbls() should be
calculated using ib_umem_num_dma_blocks() with the same size/shift passed
to qedr_populate_pbls().
Link: https://lore.kernel.org/r/10-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If ib_umem_find_best_pgsz() returns > PAGE_SIZE then the equation here is
not correct. 'start' should be 'virt'. Change it to use the core code for
page_num and the canonical calculation of page_shift.
Fixes: eb52c0333f ("RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size")
Link: https://lore.kernel.org/r/8-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If ib_umem_find_best_pgsz() returns > PAGE_SIZE then the equation here is
not correct. 'start' should be 'virt'. Change it to use the core code for
page_num and the canonical calculation of page_shift.
Fixes: 40ddb3f020 ("RDMA/efa: Use API to get contiguous memory blocks aligned to device supported page size")
Link: https://lore.kernel.org/r/7-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Tested-by: Gal Pressman <galpress@amazon.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_umem_num_pages() should only be used by things working with the SGL in
CPU pages directly.
Drivers building DMA lists should use the new ib_num_dma_blocks() which
returns the number of blocks rdma_umem_for_each_block() will return.
To make this general for DMA drivers requires a different implementation.
Computing DMA block count based on umem->address only works if the
requested page size is < PAGE_SIZE and/or the IOVA == umem->address.
Instead the number of DMA pages should be computed in the IOVA address
space, not umem->address. Thus the IOVA has to be stored inside the umem
so it can be used for these calculations.
For now set it to umem->address by default and fix it up if
ib_umem_find_best_pgsz() was called. This allows drivers to be converted
to ib_umem_num_dma_blocks() safely.
Link: https://lore.kernel.org/r/6-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Generally drivers should be using this core helper to split up the umem
into DMA pages.
These drivers are all probably wrong in some way to pass PAGE_SIZE in as
the HW page size. Either the driver doesn't support other page sizes and
it should use 4096, or the driver does support other page sizes and should
use ib_umem_find_best_pgsz() to select the best HW pages size of the HW
supported set.
The only case it could be correct is if the HW has a global setting for
PAGE_SIZE set at driver initialization time.
Link: https://lore.kernel.org/r/5-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This helper does the same as rdma_for_each_block(), except it works on a
umem. This simplifies most of the call sites.
Link: https://lore.kernel.org/r/4-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The calculation in rdma_find_pg_bit() is fairly complicated, and the
function is never called anywhere else. Inline a simpler version into
ib_umem_find_best_pgsz()
Link: https://lore.kernel.org/r/3-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rdma_for_each_block() makes assumptions about how the SGL is constructed
that don't work if the block size is below the page size used to to build
the SGL.
The rules for umem SGL construction require that the SG's all be PAGE_SIZE
aligned and we don't encode the actual byte offset of the VA range inside
the SGL using offset and length. So rdma_for_each_block() has no idea
where the actual starting/ending point is to compute the first/last block
boundary if the starting address should be within a SGL.
Fixing the SGL construction turns out to be really hard, and will be the
subject of other patches. For now block smaller pages.
Fixes: 4a35339958 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/2-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is possible for a single SGL to span an aligned boundary, eg if the SGL
is
61440 -> 90112
Then the length is 28672, which currently limits the block size to
32k. With a 32k page size the two covering blocks will be:
32768->65536 and 65536->98304
However, the correct answer is a 128K block size which will span the whole
28672 bytes in a single block.
Instead of limiting based on length figure out which high IOVA bits don't
change between the start and end addresses. That is the highest useful
page size.
Fixes: 4a35339958 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/1-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change counters to return failure like any other verbs destroy, however
this flow shouldn't return error at all.
Link: https://lore.kernel.org/r/20200907120921.476363-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6d ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ib_alloc_cq*() and ib_free_cq*() are solely kernel verbs to manage CQs
and doesn't need extra indirection just to call same functions with
constant parameter NULL as udata.
Link: https://lore.kernel.org/r/20200907120921.476363-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HW release can fail and leave the system in limbo state, where SRQ is
removed from the table, but can't be destroyed later. In every reentry,
the initial xa_erase_irq() check will fail.
Rewrite the erase logic to keep index, but don't store the entry
itself. By doing it, we can safely reinsert entry back in the case of
destroy failure.
Link: https://lore.kernel.org/r/20200907120921.476363-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other IB verbs objects, AH are refcounted by ib_core. The release
of those objects are controlled by ib_core with promise that AH destroy
can't fail.
Being SW object for now, this change makes dealloc_ah() to behave like any
other destroy IB flows.
Fixes: d345691471 ("RDMA: Handle AH allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IB verbs objects are counted by the kernel and ib_core ensures that
deallocate PD will success so it will be called once all other objects
that depends on PD will be released. This is achieved by managing various
reference counters on such objects.
The mlx5 driver didn't follow this standard flow when allowed DEVX objects
that are not managed by ib_core to be interleaved with the ones under
ib_core responsibility.
In such interleaved scenarios deallocate command can fail and ib_core will
leave uobject in internal DB and attempt to clean it later to free
resources anyway.
This change partially restores returned value from dealloc_pd() for all
drivers, but keeping in mind that non-DEVX devices and kernel verbs paths
shouldn't fail.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently we allocate rx buffers in a single contiguous buffers for
headers (iser and iscsi) and data trailer. This means that most likely the
data starting offset is aligned to 76 bytes (size of both headers).
This worked fine for years, but at some point this broke, resulting in
data corruptions in isert when a command comes with immediate data and the
underlying backend device assumes 512 bytes buffer alignment.
We assume a hard-requirement for all direct I/O buffers to be 512 bytes
aligned. To fix this, we should avoid passing unaligned buffers for I/O.
Instead, we allocate our recv buffers with some extra space such that we
can have the data portion align to 512 byte boundary. This also means that
we cannot reference headers or data using structure but rather
accessors (as they may move based on alignment). Also, get rid of the
wrong __packed annotation from iser_rx_desc as this has only harmful
effects (not aligned to anything).
This affects the rx descriptors for iscsi login and data plane.
Fixes: 3d75ca0ade ("block: introduce multi-page bvec helpers")
Link: https://lore.kernel.org/r/20200904195039.31687-1-sagi@grimberg.me
Reported-by: Stephen Rust <srust@blockbridge.com>
Tested-by: Doug Dumitru <doug@dumitru.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rnbd_server module's communication manager (cm) initialization depends
on the registration of the "network namespace subsystem" of the RDMA CM
agent module. As such, when the kernel is configured to load the
rnbd_server and the RDMA cma module during initialization; and if the
rnbd_server module is initialized before RDMA cma module, a null ptr
dereference occurs during the RDMA bind operation.
Call trace:
Call Trace:
? xas_load+0xd/0x80
xa_load+0x47/0x80
cma_ps_find+0x44/0x70
rdma_bind_addr+0x782/0x8b0
? get_random_bytes+0x35/0x40
rtrs_srv_cm_init+0x50/0x80
rtrs_srv_open+0x102/0x180
? rnbd_client_init+0x6e/0x6e
rnbd_srv_init_module+0x34/0x84
? rnbd_client_init+0x6e/0x6e
do_one_initcall+0x4a/0x200
kernel_init_freeable+0x1f1/0x26e
? rest_init+0xb0/0xb0
kernel_init+0xe/0x100
ret_from_fork+0x22/0x30
Modules linked in:
CR2: 0000000000000015
All this happens cause the cm init is in the call chain of the module
init, which is not a preferred practice.
So remove the call to rdma_create_id() from the module init call chain.
Instead register rtrs-srv as an ib client, which makes sure that the
rdma_create_id() is called only when an ib device is added.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200907103106.104530-1-haris.iqbal@cloud.ionos.com
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The device .release function was not being set during the device
initialization. This was leading to the below warning, in error cases when
put_srv was called before device_add was called.
Warning:
Device '(null)' does not have a release() function, it is broken and must
be fixed. See Documentation/kobject.txt.
So, set the device .release function during device initialization in the
__alloc_srv() function.
Fixes: baa5b28b7a ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add")
Link: https://lore.kernel.org/r/20200907102216.104041-1-haris.iqbal@cloud.ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
drivers/infiniband/hw/bnxt_re/main.c:1012:25:
warning: variable ‘qplib_ctx’ set but not used [-Wunused-but-set-variable]
Fixes: f86b31c6a2 ("RDMA/bnxt_re: Static NQ depth allocation")
Link: https://lore.kernel.org/r/20200905121624.32776-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently it triggers a WARN_ON and then goes ahead and destroys the
uobject anyhow, leaking any driver memory.
The only place that leaks driver memory should be during FD close() in
uverbs_destroy_ufile_hw().
Drivers are only allowed to fail destroy uobjects if they guarantee
destroy will eventually succeed. uverbs_destroy_ufile_hw() provides the
loop to give the driver that chance.
Link: https://lore.kernel.org/r/20200902081708.746631-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for unconditionally passing the struct tasklet_struct
pointer to all tasklet callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Link: https://lore.kernel.org/r/20200903060637.424458-6-allen.lkml@gmail.com
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for unconditionally passing the struct tasklet_struct
pointer to all tasklet callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Link: https://lore.kernel.org/r/20200903060637.424458-5-allen.lkml@gmail.com
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for unconditionally passing the struct tasklet_struct
pointer to all tasklet callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Link: https://lore.kernel.org/r/20200903060637.424458-4-allen.lkml@gmail.com
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for unconditionally passing the struct tasklet_struct
pointer to all tasklet callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Link: https://lore.kernel.org/r/20200903060637.424458-3-allen.lkml@gmail.com
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for unconditionally passing the struct tasklet_struct
pointer to all tasklet callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Link: https://lore.kernel.org/r/20200903060637.424458-2-allen.lkml@gmail.com
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ can be destroyed right before mlx5_cmd_get_srq is called.
In such case the latter will return NULL instead of expected SRQ.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200830084010.102381-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In ucma_process_join(), if the call to xa_alloc() fails, the function will
return without freeing mc. Fix this by jumping to the correct line.
In the process I renamed the jump labels to something more memorable for
extra clarity.
Link: https://lore.kernel.org/r/20200902162454.332828-1-alex.dewar90@gmail.com
Addresses-Coverity-ID: 1496814 ("Resource leak")
Fixes: 95fe51096b ("RDMA/ucma: Remove mc_list and rely on xarray")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the returned speed from __ethtool_get_link_ksettings() is
SPEED_UNKNOWN this will lead to reporting a wrong speed and width for
providers that uses ib_get_eth_speed(), fix that by defaulting the
netdev_speed to SPEED_1000 in case the returned value from
__ethtool_get_link_ksettings() is SPEED_UNKNOWN.
Fixes: d41861942f ("IB/core: Add generic function to extract IB speed from netdev")
Link: https://lore.kernel.org/r/20200902124304.170912-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It's not safe to access the next CQ in list_for_each_entry() after
invoking ib_free_cq(), because the CQ has already been freed in current
iteration. It should be replaced by list_for_each_entry_safe().
Fixes: c7ff819aef ("RDMA/core: Introduce shared CQ pool API")
Link: https://lore.kernel.org/r/1598963935-32335-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As qedr driver supports both RoCE and iWarp, make sure to set the
max_pkeys only when running in RoCE mode.
Link: https://lore.kernel.org/r/20200827141655.406185-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This function has a lot of gotos which could be replaced by simple
returns, making the function tidier and less bug prone.
Link: https://lore.kernel.org/r/20200825171242.448447-2-alex.dewar90@gmail.com
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 36a8f01cd2 ("IB/qib: Add congestion control agent
implementation") erroneously marked a couple of switch cases as /*
FALLTHROUGH */, which were later converted to fallthrough statements by
commit df561f6688 ("treewide: Use fallthrough pseudo-keyword"). This
triggered a Coverity warning about unreachable code.
Remove the fallthrough statements.
Link: https://lore.kernel.org/r/20200825171242.448447-1-alex.dewar90@gmail.com
Addresses-Coverity: ("Unreachable code")
Fixes: 36a8f01cd2 ("IB/qib: Add congestion control agent implementation")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV
hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E
LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5
8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6
tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf
CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg
d81lv2c=
=uW/F
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc3' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change rxe pools to use kzalloc instead of kmem_cache to allocate memory
for rxe objects. The pools are not really necessary and they trigger
hardened user copy warnings as the ioctl framework copies the QP number
directly to userspace.
Also the general project to move object alloation to the core code will
eventually clean these out anyhow.
Link: https://lore.kernel.org/r/20200827163535.2632-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drivers that fail destroy can cause uverbs to leak uobjects. Drivers are
required to always eventually destroy their ubojects, so trigger a WARN_ON
to detect this driver bug.
Link: https://lore.kernel.org/r/0-v1-b1e0ed400ba9+f7-warn_destroy_ufile_hw_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The UDP source port number in RoCE v2 is used to create entropy for
network routers (ECMP), load balancers and 802.3ad link aggregation
switching that are not aware of RoCE IB headers. Considering that the IB
core has achieved a new interface to get a hashed value of it, the fixed
value of it in QPC and UD WQE in hns driver could be fixed and the port
number is to be set dynamically now.
For QPC of RC, the value could be hashed from flow_lable if the user pass
it in or from remote qpn and local qpn. For WQE of UD, it is set according
to fl or as a random value.
Link: https://lore.kernel.org/r/1598002289-8611-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It should be considered an illegal operation if the ULP attempts to modify
a QP from another state to the current hardware state. Otherwise, the ULP
can modify some fields of QPC at any time. For example, for a QP in state
of RTS, modify it from RTR to RTS can change the PSN, which is always not
as expected.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/1598353674-24270-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver crashes when destroy_qp is re-tried because of an error
returned. This is because the qp entry was removed from the qp list during
the first call.
Remove qp from the list only if destroy_qp returns success.
The driver will still trigger a WARN_ON due to the memory leaking, but at
least it isn't corrupting memory too.
Fixes: 8dae419f9e ("RDMA/bnxt_re: Refactor queue pair creation code")
Link: https://lore.kernel.org/r/1598292876-26529-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When computing the first psn entry, driver checks for page alignment. If
this address is not page aligned,it attempts to compute the offset in that
page for later use by using ALIGN macro. ALIGN macro does not return
offset bytes but the requested aligned address and hence cannot be used
directly to store as offset. Since driver was using the address itself
instead of offset, it resulted in invalid address when filling the psn
buffer.
Fixed driver to use PAGE_MASK macro to calculate the offset.
Fixes: fddcbbb02a ("RDMA/bnxt_re: Simplify obtaining queue entry from hw ring")
Link: https://lore.kernel.org/r/1598292876-26529-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some adapters report more than 256 gid entries. Restrict it to 256 for
now.
Fixes: 1ac5a4047975("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1598292876-26529-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
At first, driver allocates memory for NQ based on qplib_ctx->cq_count and
qplib_ctx->srqc_count. Later when creating ring, it uses a static value
of 128K -1.
Fixing this with a static value for now.
Fixes: b08fe048a6 ("RDMA/bnxt_re: Refactor net ring allocation function")
Link: https://lore.kernel.org/r/1598292876-26529-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qp->id can be a value outside the max number of qp. Indexing the qp table
with the id can cause out of bounds crash. So changing the qp table
indexing by (qp->id % max_qp -1).
Allocating one extra entry for QP1. Some adapters create one more than the
max_qp requested to accommodate QP1. If the qp->id is 1, store the
inforamtion in the last entry of the qp table.
Fixes: f218d67ef0 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Link: https://lore.kernel.org/r/1598292876-26529-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
QP1 Rx CQE reports transparent VLAN ID in the completion and this is used
while reporting the completion for received MAD packet. Check if the vlan
id is configured before reporting it in the work completion.
Fixes: 84511455ac ("RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion")
Link: https://lore.kernel.org/r/1598292876-26529-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the pkey_table is not available (which is the case when RoCE is not
supported), the cited commit caused a regression where mlx4_devices
without RoCE are not created.
Fix this by returning a pkey table length of zero in procedure
eth_link_query_port() if the pkey-table length reported by the device is
zero.
Link: https://lore.kernel.org/r/20200824110229.1094376-1-leon@kernel.org
Cc: <stable@vger.kernel.org>
Fixes: 1901b91f99 ("IB/core: Fix potential NULL pointer dereference in pkey cache")
Fixes: fa417f7b52 ("IB/mlx4: Add support for IBoE")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the query_pkey() isn't mandatory by the RDMA core, this callback
can be removed from the usnic provider. The libfabric userspace never
touches the pkey.
Link: https://lore.kernel.org/r/20200820125346.111902-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use cancel_work_sync() to ensure that the wq is not running and simply
assign NULL to ctx->cm_id to indicate if the work ran or not. Delete the
close_wq since flush_workqueue() is no longer needed.
Link: https://lore.kernel.org/r/20200818120526.702120-15-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a new connection is established the RDMA CM creates a new cm_id and
passes it through to the event handler. However inside the UCMA the new ID
is not assigned a ucma_context until the user retrieves the event from a
syscall.
This creates a weird edge condition where a cm_id's context can continue
to point at the listening_id that created it, and a number of additional
edge conditions on event list clean up related to destroying half created
IDs.
There is also a race condition in ucma_get_events() where the
cm_id->context is being assigned without holding the handler_mutex.
Simplify all of this by creating the ucma_context inside the event handler
itself and eliminating the edge case of a half created cm_id. All cm_id's
can be uniformly destroyed via __destroy_id() or via the close_work.
Link: https://lore.kernel.org/r/20200818120526.702120-14-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the backlog is now an atomic the file->mut is now only protecting
the event_list and ctx_list. Narrow its scope to make it clear
Link: https://lore.kernel.org/r/20200818120526.702120-13-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All entry points to the rdma_cm from a ULP must be single threaded,
even this error unwinds. Add the missing locking.
Fixes: 7c11910783 ("RDMA/ucma: Put a lock around every call to the rdma_cm layer")
Link: https://lore.kernel.org/r/20200818120526.702120-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This value is locked under the file->mut, ensure it is held whenever
touching it.
The case in ucma_migrate_id() is a race, while in ucma_free_uctx() it is
already not possible for the write side to run, the movement is just for
clarity.
Fixes: 88314e4dda ("RDMA/cma: add support for rdma_migrate_id()")
Link: https://lore.kernel.org/r/20200818120526.702120-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ctx->file is changed under the file->mut lock by ucma_migrate_id(), which
is impossible to lock correctly. Instead change ctx->file under the
handler_lock and ctx_table lock and revise all places touching ctx->file
to use this locking when reading ctx->file.
Link: https://lore.kernel.org/r/20200818120526.702120-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The only reader of destroying is inside a handler under the handler_mutex,
so directly use the handler_mutex when setting it instead of the larger
file->mut.
As the refcount could be zero here, and the cm_id already freed, and
additional refcount grab around the locking is required to touch the
cm_id.
Link: https://lore.kernel.org/r/20200818120526.702120-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In almost all cases rdma_accept() is called under the handler_mutex by
ULPs from their handler callbacks. The one exception was ucma which did
not get the handler_mutex.
To improve the understand-ability of the locking scheme obtain the mutex
for ucma as well.
This improves how ucma works by allowing it to directly use handler_mutex
for some of its internal locking against the handler callbacks intead of
the global file->mut lock.
There does not seem to be a serious bug here, other than a DISCONNECT event
can be delivered concurrently with accept succeeding.
Link: https://lore.kernel.org/r/20200818120526.702120-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is not really necessary to keep a linked list of mcs associated with
each context when we can just scan the xarray to find the right things.
The removes another overloading of file->mut by relying on the xarray
locking for mc instead.
Link: https://lore.kernel.org/r/20200818120526.702120-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The store to ctx->cm_id was based on the idea that _ucma_find_context()
would not return the ctx until it was fully setup.
Without locking this doesn't work properly.
Split things so that the xarray is allocated with NULL to reserve the ID
and once everything is final set the cm_id and store.
Along the way this shows that the error unwind in ucma_get_event() if a
new ctx is created is wrong, fix it up.
Link: https://lore.kernel.org/r/20200818120526.702120-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ucma_close() is open coding the tail end of ucma_destroy_id(), consolidate
this duplicated code into a function.
Link: https://lore.kernel.org/r/20200818120526.702120-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
During the file_operations release function it is already not possible
that write() can be running concurrently, remove the extra locking
around the ctx_list.
Link: https://lore.kernel.org/r/20200818120526.702120-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Both ucma_destroy_id() and ucma_close_id() (triggered from an event via a
wq) can drive the refcount to zero. ucma_get_ctx() was wrongly assuming
that the refcount can only go to zero from ucma_destroy_id() which also
removes it from the xarray.
Use refcount_inc_not_zero() instead.
Link: https://lore.kernel.org/r/20200818120526.702120-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When DCT QPs work in RoCE LAG mode:
1. DCT creation is allowed only when it is supported
2. The "port" of a DCT QP is assigned in a round-robin way
Link: https://lore.kernel.org/r/20200818115245.700581-3-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
DCI QP supports tx_affinity as well.
Link: https://lore.kernel.org/r/20200818115245.700581-2-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the interest of converging on a common instrumentation infrastructure,
modernize the pr_debug() call sites added by commit 119bf81793 ("IB/cm:
Add debug prints to ib_cm"). The new tracepoints appear in a new "ib_cma"
subsystem.
The conversion is somewhat mechanical. Someone more familiar with the
semantics of the recorded information might suggest additional data
capture.
Some benefits include:
- Tracepoints enable "always on" reporting of these errors
- The error records are structured and compact
- Tracepoints provide hooks for eBPF scripts
Sample output:
nfsd-1954 [003] 62.017901: icm_dreq_skipped: local_id=1998890974 remote_id=1129750393 state=DREQ_RCVD lap_state=LAP_UNINIT
Link: https://lore.kernel.org/r/159767239665.2968.10613294222688696646.stgit@klimt.1015granger.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The alloc ucontext flow is always called with a valid udata, there's no
need to test whether it's NULL.
While at it, the 'udata->outlen' check is removed as well as we copy the
minimum between the size of the response and outlen, so in case of zero
outlen, zero bytes will be copied.
Link: https://lore.kernel.org/r/20200818110835.54299-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the kernel-doc documentation by matching between the functions
definitions and documentation.
Link: https://lore.kernel.org/r/20200820123512.105193-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Creating rxe device on top of vlan interface will create a non-functional
device that has an empty gids table and can't be used for rdma cm
communication.
This is caused by the logic in
enum_all_gids_of_dev_cb()/is_eth_port_of_netdev(), which only considers
networks connected to "upper devices" of the configured network device,
resulting in an empty set of gids for a vlan interface, and attempts to
connect via this rdma device fail in cm_init_av_for_response because no
gids can be resolved.
Apparently, this behavior was implemented to fit the HW-RoCE devices that
create RoCE device per port, therefore RXE must behave the same like
HW-RoCE devices and create rxe device per real device only.
In order to communicate via a vlan interface, the user must use the gid
index of the vlan address instead of creating rxe over vlan.
Link: https://lore.kernel.org/r/20200811150415.3693-1-goody698@gmail.com
Signed-off-by: Mohammad Heib <goody698@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
'parent' sysfs reads will yield '\0' bytes when the interface name has 15
chars, and there will no "\n" output.
To reproduce, create one interface with 15 chars:
[root@test ~]# ip a s enp0s29u1u7u3c2
2: enp0s29u1u7u3c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff
inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute
valid_lft forever preferred_lft forever
[root@test ~]# modprobe rdma_rxe
[root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add
[root@test ~]# cat /sys/class/infiniband/rxe0/parent
enp0s29u1u7u3c2[root@test ~]#
[root@test ~]# f="/sys/class/infiniband/rxe0/parent"
[root@test ~]# echo "$(<"$f")"
-bash: warning: command substitution: ignored null byte in input
enp0s29u1u7u3c2
Use scnprintf and PAGE_SIZE to fill the sysfs output buffer.
Cc: stable@vger.kernel.org
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200820153646.31316-1-yi.zhang@redhat.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are error cases when we will call free_srv before device kobject is
initialized; in such cases calling put_device generates the following
warning:
kobject: '(null)' (000000009f5445ed): is not initialized, yet
kobject_put() is being called.
So call device_initialize() only once when the server is allocated. If we
end up calling put_srv() and subsequently free_srv(), our call to
put_device() would result in deletion of the obj. Call device_add() later
when we actually have a connection. Correspondingly, call device_del()
instead of device_unregister() when srv->dev_ref falls to 0.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200811092722.2450-1-haris.iqbal@cloud.ionos.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When scheduling delayed work to clean up the cache, if the entry already
has been scheduled for deletion, we adjust the delay.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-7-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A CM REJ packet with its reason equal to timeout is a special beast in the
sense that it doesn't have a Remote Communication ID nor does it have a
Remote Port GID.
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.
This proxying doesn't not handle said REJ packets.
If the active side abandons its connection attempt after having sent a
REQ, it will send a REJ with the reason being timeout. This example can be
provoked by a simple user-verbs program, which ends up doing:
rdma_connect(cm_id, &conn_param);
rdma_destroy_id(cm_id);
using the async librdmacm API.
Having dynamic debug prints enabled in the mlx4_ib driver, we will then
see:
mlx4_ib_demux_cm_handler: Couldn't find an entry for pv_cm_id 0x0, attr_id 0x12
The solution is to introduce a radix-tree. When a REQ packet is received
and handled in mlx4_ib_demux_cm_handler(), we know the connecting peer's
para-virtual cm_id and the destination slave. We then insert an entry into
the tree with said information. We also schedule work to remove this entry
from the tree and free it, in order to avoid memory leak.
When a REJ packet with reason timeout is received, we can look up the
slave in the tree, and deliver the packet to the correct slave.
When a duplicate REQ packet is received, the entry is in the tree. In this
case, we adjust the delayed work in order to avoid a too premature
eviction of the entry.
When cleaning up, we simply traverse the tree and modify any delayed work
to use a zero delay. A subsequent flush of the system_wq will ensure all
entries being wiped out.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-6-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx4 driver will proxy MAD packets through the PF driver. A VM or an
instantiated VF will send its MAD packets to the PF driver using
loop-back. The PF driver will be informed by an interrupt, but defer the
handling and polling of CQEs to a worker thread running on an ordered
work-queue.
Consider the following scenario: the VMs will in short proximity in time,
for example due to a network event, send many MAD packets to the PF
driver. Lets say there are K VMs, each sending N packets.
The interrupt from the first VM will start the worker thread, which will
poll N CQEs. A common case here is where the PF driver will multiplex the
packets received from the VMs out on the wire QP.
But before the wire QP has returned a send CQE and associated interrupt,
the other K - 1 VMs have sent their N packets as well.
The PF driver has to multiplex K * N packets out on the wire QP. But the
send-queue on the wire QP has a finite capacity.
So, in this scenario, if K * N is larger than the send-queue capacity of
the wire QP, we will get MAD packets dropped on the floor with this
dynamic debug message:
mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)
and this despite the fact that the wire send-queue could have capacity,
but the PF driver isn't aware, because the wire send CQEs have not yet
been polled.
We can also have a similar scenario inbound, with a wire recv-queue larger
than the tunnel QP's send-queue. If many remote peers send MAD packets to
the very same VM, the tunnel send-queue destined to the VM could allegedly
be construed to be full by the PF driver.
This starvation is fixed by introducing separate work queues for the wire
QPs vs. the tunnel QPs.
With this fix, using a dual ported HCA, 8 VFs instantiated, we could run
cmtime on each of the 18 interfaces towards a similar configured peer,
each cmtime instance with 800 QPs (all in all 14400 QPs) without a single
CM packet getting lost.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-5-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using CX-3 in virtualized mode, MAD packets are proxied through the PF
driver. The feed is N tunnel QPs, and what is received from the VFs is
multiplexed out on the wire QP. Since this is a many-to-one scenario, it
is better to have separate initialization parameters for the two usages.
The number of wire and tunnel bufs are yanked up to 2K and 512
respectively. With this set of parameters, a system consisting of eight
physical servers, each with eight VMs and 14 I/O servers (BM), can run
switch fail-over without seeing:
mlx4_ib_demux_mad: failed sending GSI to slave 3 via tunnel qp (-11)
or
mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-4-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using CX-3 in virtualized mode, MAD packets are proxied through the PF
driver. However, the handling lacks support of the MRA (Message Receipt
Acknowledgment) packet. When having dynamic debug enabled, we see tons of:
mlx4_ib_multiplex_cm_handler: id{slave: 7, sl_cm_id: 0x8fcb45a0} is NULL! attr_id: 0x11
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-3-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add missing check for success after call to mlx4_ib_send_to_wire() in
mlx4_ib_multiplex_mad().
Amended the existing pr_debug() in mlx4_ib_multiplex_cm_handler() and
mlx4_ib_demux_cm_handler() with attr_id during a lookup failure.
Removed two noisy pr_debug() in mad.c
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-2-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch caused some issues on SEND operation, and it should be reverted
to make the drivers work correctly. There will be a better solution that
has been tested carefully to solve the original problem.
This reverts commit 711195e57d.
Fixes: 711195e57d ("RDMA/hns: Reserve one sge in order to avoid local length error")
Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The following message occurs when running an AI application with TID RDMA
enabled:
hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084
hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084
The issue happens when TID RDMA WRITE request is followed by an
IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on
the responder side. As a result, no ACK packet for the latter could be
sent because the TID RDMA WRITE request is still being processed on the
responder side.
When the TID RDMA WRITE request is eventually completed, the requester
will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged.
If the next request is another TID RDMA WRITE request, no TID RDMA WRITE
DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM
request is not completed yet.
Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be
ignored on the responder side because the responder thinks it has already
been completed. Eventually the retry will be exhausted and the qp will be
put into error state on the requester side. On the responder side, the TID
resource timer will eventually expire because no TID RDMA WRITE DATA
packets will be received for the second TID RDMA WRITE request. There is
also risk of a write-after-write memory corruption due to the issue.
Fix by adding a requester side interlock to prevent any potential data
corruption and TID RDMA protocol error.
Fixes: a0b34f75ec ("IB/hfi1: Add interlock between a TID RDMA request and other requests")
Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org> # 5.4.x+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver shall add only the kernel qps to the flush list for clean up.
During async error events from the HW, driver is adding qps to this list
without checking if the qp is kernel qp or not.
Add a check to avoid user qp addition to the flush list.
Fixes: 942c9b6ca8 ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Fixes: c50866e285 ("bnxt_re: fix the regression due to changes in alloc_pbl")
Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The isert_post_recv function prints an error in case of failures, so no
need for the callers to add another print.
Link: https://lore.kernel.org/r/20200805121231.166162-2-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to allow sniffer when the RDMA device is in switchdev mode, we
don't need to set the source port when creating the sniffer rule.
Link: https://lore.kernel.org/r/20200803060214.15328-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Support 56, 25, 100, 200 and 50Gbps IB rates in mlx5 driver.
Link: https://lore.kernel.org/r/20200802081712.1993490-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch introduces the ability to configure SRD QPs with the RNR retry
parameter when issuing a modify QP command.
In addition, a capability bit was added to report support to the userspace
library.
Link: https://lore.kernel.org/r/20200731060420.17053-5-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This precursory patch adds the SRD QP type state machine, which is
currently identical to the one of UD QP type. A following patch is going
to change the SRD QP state machine to support RNR retry modifications.
Link: https://lore.kernel.org/r/20200731060420.17053-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The modify QP bitmask was not consistent with other bitmasks used in the
device interface. Remove the bitmask enum and allow usage with
EFA_GET/SET.
Link: https://lore.kernel.org/r/20200731060420.17053-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of adding a new function for each capability added, introduce a
generic helper to query device capabilities.
Link: https://lore.kernel.org/r/20200731060420.17053-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The "domain" argument is constant and modern device (mlx5) doesn't support
anything except IB_FLOW_DOMAIN_USER, so delete this extra parameter and
simplify code.
Link: https://lore.kernel.org/r/20200730081235.1581127-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Improve readability of fs.c by converting multiple else-if constructions
to be implemented with switch keyword.
Link: https://lore.kernel.org/r/20200730081235.1581127-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more. Remove that parameter in the whole gup
stack.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Smaller set of RDMA updates. A smaller number of 'big topics' with the
majority of changes being driver updates.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob for
device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it off.
Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of a
device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed
-----BEGIN PGP SIGNATURE-----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=0z2L
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
For RDMA TX flow table, set destination type to be 'port' and prevent
creation of flows with TIR destination.
As RDMA TX is an egress flow table the rules on this flow table should
not forward traffic back to the NIC and should set the destination to be
the port.
Without the setting of this destination type flow rules on the RDMA TX
flow tables are not created as FW invokes a syndrome for undefined
destination for the rule.
Fixes: 24670b1a31 ("net/mlx5: Add support for RDMA TX steering")
Link: https://lore.kernel.org/r/20200803055849.14947-1-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=90UK
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
The RoCE spec requires RoCE devices to support only the default pkey.
However the rxe driver maintains a 64 enties pkey table and uses only the
first entry. Remove the pkey table and hard code a table of length one
hard wired with the default pkey. Replace all checks of the pkey_table
with a comparison to the default_pkey instead.
Link: https://lore.kernel.org/r/20200721101618.686110-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Mapping as little as 64GB can take more than 10 seconds, triggering issues
on kernels with CONFIG_PREEMPT_NONE=y.
ib_umem_get() already splits the work in 2MB units on x86_64, adding a
cond_resched() in the long-lasting loop is enough to solve the issue.
Note that sg_alloc_table() can still use more than 100 ms, which is also
problematic. This might be addressed later in ib_umem_add_sg_table(),
adding new blocks in sgl on demand.
Link: https://lore.kernel.org/r/20200730015755.1827498-1-edumazet@google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the hns ROCEE reports a general error CQE (types not specified by the IB
General Specifications), it's no need to change the QP state to error, and
the driver should just skip it.
Fixes: 7c044adca2 ("RDMA/hns: Simplify the cqe code of poll cq")
Link: https://lore.kernel.org/r/1595932941-40613-8-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
One qp state migrations legal configuration was deleted mistakenly.
Fixes: 357f342946 ("RDMA/hns: Simplify the state judgment code of qp")
Link: https://lore.kernel.org/r/1595932941-40613-7-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hns_roce_cmq_setup_basic_desc() can clear the whole desc, so removes
these redundant memset operations.
Link: https://lore.kernel.org/r/1595932941-40613-6-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are some functions called by set_rc_wqe() use two parameters:
"void *wqe" and "struct hns_roce_v2_rc_send_wqe *rc_sq_wqe", but the first
one can be got from the second one. So remove the redundant wqe from
related functions.
Link: https://lore.kernel.org/r/1595932941-40613-5-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08_A is an temporary version and all features of it are supported by
HIP08_B. So remove the relevant code.
Link: https://lore.kernel.org/r/1595932941-40613-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The parts about preparing and sending mailbox to hardware is not strongly
related to other codes in hns_roce_v2_set_hem(), and can be encapsulated
into a separate function.
Link: https://lore.kernel.org/r/1595932941-40613-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HNS_ROCE_SQ_OPCODE_XXXs and HNS_ROCE_V2_WQE_OP_XXXs have same values, so
remove a set of redundant definitions. In addition, remove the suffix of
HNS_ROCE_V2_WQE_OP_BIND_MW_TYPE.
Link: https://lore.kernel.org/r/1595932941-40613-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The memory allocated for the DIM wasn't freed in in error unwind path, fix
it by calling to rdma_dim_destroy().
Fixes: da6629793a ("RDMA/core: Provide RDMA DIM support for ULPs")
Link: https://lore.kernel.org/r/20200730082719.1582397-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com <mailto:maxg@mellanox.com>>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW destroy operation should be last operation after all possible CQ users
completed their work, so move DIM work cancellation before such destroy
call.
Fixes: da6629793a ("RDMA/core: Provide RDMA DIM support for ULPs")
Link: https://lore.kernel.org/r/20200730082719.1582397-3-leon@kernel.org
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The lookaside count is improperly initialized to the size of the
Receive Queue with the additional +1. In the traces below, the
RQ size is 384, so the count was set to 385.
The lookaside count is then rarely refreshed. Note the high and
incorrect count in the trace below:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c
qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
The head,tail indicate there is only one RWQE posted although the count
says 385 and we correctly return the element 0.
The next call to rvt_get_rwqe with the decremented count:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c
qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1,
which is not valid because of the bogus high count.
Best case, the RWQE has never been posted and the rc logic sees an RWQE
that is too small (all zeros) and puts the QP into an error state.
In the worst case, a server slow at posting receive buffers might fool
rvt_get_rwqe() into fetching an old RWQE and corrupt memory.
Fix by deleting the faulty initialization code and creating an
inline to fetch the posted count and convert all callers to use
new inline.
Fixes: f592ae3c99 ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs")
Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When dumping QPs bound to a counter, raw QPs should be allowed to dump
without the CAP_NET_RAW privilege. This is consistent with what "rdma res
show qp" does.
Fixes: c4ffee7c9b ("RDMA/netlink: Implement counter dumpit calback")
Link: https://lore.kernel.org/r/20200727095828.496195-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
lockdep triggers a warning from time to time when running a regression
test:
rnbd_client L685: </dev/nullb0@bla> Device disconnected.
rnbd_client L1756: Unloading module
workqueue: WQ_MEM_RECLAIM rtrs_client_wq:rtrs_clt_reconnect_work [rtrs_client] is flushing !WQ_MEM_RECLAIM ib_addr:process_one_req [ib_core]
WARNING: CPU: 2 PID: 18824 at kernel/workqueue.c:2517 check_flush_dependency+0xad/0x130
The root cause is workqueue core expect flushing should not be done for a
!WQ_MEM_RECLAIM wq from a WQ_MEM_RECLAIM workqueue.
In above case ib_addr workqueue without WQ_MEM_RECLAIM, but rtrs_wq
WQ_MEM_RECLAIM.
To avoid the warning, remove the WQ_MEM_RECLAIM flag.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200724111508.15734-4-haris.iqbal@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid all the clients to start reconnecting at the same time
schedule the reconnect dwork with a random jitter of +[0,8] seconds.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200724111508.15734-2-haris.iqbal@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Scatter CQE feature relies on two flags MLX5_QP_FLAG_SCATTER_CQE and
MLX5_QP_FLAG_ALLOW_SCATTER_CQE, both of them can be provided without
relation to device capability.
Relax global validity check to allow MLX5_QP_FLAG_ALLOW_SCATTER_CQE QP
flag.
Existing user applications are failing on this new validity check.
Fixes: 90ecb37a75 ("RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags")
Fixes: 37518fa49f ("RDMA/mlx5: Process all vendor flags in one place")
Link: https://lore.kernel.org/r/20200728120255.805733-1-leon@kernel.org
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a rdma_cm_id needs to be destroyed after a handler callback fails,
part of the destruction pattern is open coded into each call site.
Unfortunately the blind assignment to state discards important information
needed to do cma_cancel_operation(). This results in active operations
being left running after rdma_destroy_id() completes, and the
use-after-free bugs from KASAN.
Consolidate this entire pattern into destroy_id_handler_unlock() and
manage the locking correctly. The state should be set to
RDMA_CM_DESTROYING under the handler_lock to atomically ensure no futher
handlers are called.
Link: https://lore.kernel.org/r/20200723070707.1771101-5-leon@kernel.org
Reported-by: syzbot+08092148130652a6faae@syzkaller.appspotmail.com
Reported-by: syzbot+a929647172775e335941@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The REQ flows are concerned that once the handler is called on the new
cm_id the ULP can choose to trigger a rdma_destroy_id() concurrently at
any time.
However, this is not true, while the ULP can call rdma_destroy_id(), it
immediately blocks on the handler_mutex which prevents anything harmful
from running concurrently.
Remove the confusing extra locking and refcounts and make the
handler_mutex protecting state during destroy more clear.
Link: https://lore.kernel.org/r/20200723070707.1771101-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Whenever an event is delivered to the handler it should be done under the
handler_mutex and upon any non-zero return from the handler it should
trigger destruction of the cm_id.
cma_process_remove() skips some steps here, it is not necessarily wrong
since the state change should prevent any races, but it is confusing and
unnecessary.
Follow the standard pattern here, with the slight twist that the
transition to RDMA_CM_DEVICE_REMOVAL includes a cma_cancel_operation().
Link: https://lore.kernel.org/r/20200723070707.1771101-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
cma_process_remove() triggers an unconditional rdma_destroy_id() for
internal_id's and skips the event deliver and transition through
RDMA_CM_DEVICE_REMOVAL.
This is confusing and unnecessary. internal_id always has
cma_listen_handler() as the handler, have it catch the
RDMA_CM_DEVICE_REMOVAL event and directly consume it and signal removal.
This way the FSM sequence never skips the DEVICE_REMOVAL case and the
logic in this hard to test area is simplified.
Link: https://lore.kernel.org/r/20200723070707.1771101-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce a mechanism that performs an handshake between the userspace
provider and kernel driver which verifies that the user supports all
required features in order to operate correctly.
The handshake verifies the needed functionality by comparing the reported
device caps and the provider caps. If the device reports a non-zero
capability the appropriate comp mask is required from the userspace
provider in order to allocate the context.
Link: https://lore.kernel.org/r/20200722140312.3651-4-galpress@amazon.com
Reviewed-by: Shadi Ammouri <sammouri@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The device reports the minimum SQ size required for creation.
This patch queries the min SQ size and reports it back to the userspace
library.
Link: https://lore.kernel.org/r/20200722140312.3651-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Shadi Ammouri <sammouri@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The device reports the maximum number of bytes to be written before
ringing the doorbell (zero means unlimited).
This patch queries the max batch size and reports it back to the userspace
library.
Link: https://lore.kernel.org/r/20200722140312.3651-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have the driver use shared CQs provided by the rdma core driver. This
provides the advantage of improved efficiency handling interrupts.
Link: https://lore.kernel.org/r/20200722135629.49467-3-maxg@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have the driver use shared CQs provided by the rdma core driver. Since
this provides similar functionality to iser_comp it has been removed.
Now there is no reason to allocate very large CQs when the driver is
loaded while gaining the advantage of shared CQs. Previously when a single
connection was opened a CQ was opened for every core with enough space for
eight connections, this is a very large overhead that in most cases will
not be utilized.
Link: https://lore.kernel.org/r/20200722135629.49467-2-maxg@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have the driver use shared CQs provided by the rdma core driver. Since
this provides similar functionality to iser_comp it has been removed. Now
there is no reason to allocate very large CQs when the driver is loaded
while gaining the advantage of shared CQs.
Link: https://lore.kernel.org/r/20200722135629.49467-1-maxg@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Acked-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently n_rq_elems is being assigned to params.elem_size instead of the
field params.num_elems. Coverity is detecting this as a double assingment
to params.elem_size and reporting this as an usused value on the first
assignment. Fix this.
Addresses-Coverity: ("Unused value")
Fixes: b6db3f71c9 ("qed: simplify chain allocation with init params struct")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Main changes are 200G support and fixing the definitions of discard and
error counters to match the hardware definitions.
Because the HWRM_PORT_PHY_QCFG message size has now exceeded the max.
encapsulated response message size of 96 bytes from the PF to the VF,
we now need to cap this message to 96 bytes for forwarding. The forwarded
response only needs to contain the basic link status and speed information
and can be capped without adding the new information.
v2: Fix bnxt_re compile error.
Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error codes in _ib_modify_qp() are supposed to be negative errno.
Fixes: 7a5c938b9e ("IB/core: Check for rdma_protocol_ib only after validating port_num")
Link: https://lore.kernel.org/r/1595645787-20375-1-git-send-email-liheng40@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
destroy_prefetch_work() must always be called if the work is not going
to be queued. The num_sge also should have been set to i, not i-1
which avoids the condition where it shouldn't have been called in the
first place.
Cc: stable@vger.kernel.org
Fixes: fb985e278a ("RDMA/mlx5: Use SRCU properly in ODP prefetch")
Link: https://lore.kernel.org/r/20200727095712.495652-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These are missing throughout ucma, it harmlessly copies garbage from
userspace, but in this new code which uses min to compute the copy length
it can result in uninitialized stack memory. Check for minimum length at
the very start.
BUG: KMSAN: uninit-value in ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091
CPU: 0 PID: 8457 Comm: syz-executor069 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1df/0x240 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091
ucma_write+0x5c5/0x630 drivers/infiniband/core/ucma.c:1764
do_loop_readv_writev fs/read_write.c:737 [inline]
do_iter_write+0x710/0xdc0 fs/read_write.c:1020
vfs_writev fs/read_write.c:1091 [inline]
do_writev+0x42d/0x8f0 fs/read_write.c:1134
__do_sys_writev fs/read_write.c:1207 [inline]
__se_sys_writev+0x9b/0xb0 fs/read_write.c:1204
__x64_sys_writev+0x4a/0x70 fs/read_write.c:1204
do_syscall_64+0xb0/0x150 arch/x86/entry/common.c:386
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 34e2ab57a9 ("RDMA/ucma: Extend ucma_connect to receive ECE parameters")
Fixes: 0cb15372a6 ("RDMA/cma: Connect ECE to rdma_accept")
Link: https://lore.kernel.org/r/0-v1-d5b86dab17dc+28c25-ucma_syz_min_jgg@nvidia.com
Reported-by: syzbot+086ab5ca9eafd2379aa6@syzkaller.appspotmail.com
Reported-by: syzbot+7446526858b83c8828b2@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Meir Lichtinger says:
====================
ConnectX-7 supports setting relaxed ordering read/write mkey attribute by
UMR, indicated by new HCA capabilities, so extend mlx5_ib driver to
configure UMR control segment
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_uar':
RDMA/mlx5: Set mkey relaxed ordering by UMR with ConnectX-7
RDMA/mlx5: Use MLX5_SET macro instead of local structure
RDMA/mlx5: ConnectX-7 new capabilities to set relaxed ordering by UMR
Up to ConnectX-7 UMR is not used when user passes relaxed ordering access
flag. ConnectX-7 supports setting relaxed ordering read/write mkey
attribute by UMR, indicated by new HCA capabilities.
With ConnectX-7 driver uses UMR when user set relaxed ordering access
flag, in contrast to previous silicon models. Specifically it includes
setting relvant flags of mkey context mask in UMR control segment, and
relaxed ordering write and read flags in UMR mkey context segment.
Link: https://lore.kernel.org/r/20200716105248.1423452-4-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use generic mlx5 structure defined in mlx5_ifc.h to represent ConnectX
device data structures instead of using structure defined specifically for
mlx5_ib module.
Link: https://lore.kernel.org/r/20200716105248.1423452-3-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix reported by kbuild warning.
drivers/infiniband/core/uverbs_cmd.c:1897:47: warning: Shifting signed 32-bit value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
BUILD_BUG_ON(IB_USER_LAST_QP_ATTR_MASK == (1 << 31));
^
Link: https://lore.kernel.org/r/20200720175627.1273096-3-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The kbuild reported the following warning, so clean whole uverbs_cmd.c
file.
drivers/infiniband/core/uverbs_cmd.c:1066:6: warning: Variable 'ret' is reassigned a value before the old one has been used. [redundantAssignment]
ret = uverbs_request(attrs, &cmd, sizeof(cmd));
^
drivers/infiniband/core/uverbs_cmd.c:1064:0: note: Variable 'ret' is reassigned a value before the old one has been used.
int ret = -EINVAL;
^
Link: https://lore.kernel.org/r/20200720175627.1273096-2-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The automatic object lifetime model allows us to change the write()
interface to have the same logic as the ioctl() path. Update the
create/alloc functions to be in the following format, so the code flow
will be the same:
* Allocate objects
* Initialize them
* Call to the drivers, this is last step that is allowed to fail
* Finalize object
* Return response and allow to core code to handle abort/commit
respectively.
Link: https://lore.kernel.org/r/20200719052223.75245-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Create the same logic flow for the write() interface as we have for the
ioctl() path by making sure that the object is committed or aborted
automatically after HW object creation.
Link: https://lore.kernel.org/r/20200719052223.75245-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the SQ is set to a ready state when the RAW QP is modified to
INIT. When the TIS is modified, e.g. to change the lag_tx_affinity, then
SQs which are already in the ready state will not be affected.
Open a window to modify the SQ behavior by setting the SQ as ready only
when QP was modified to RTS.
Link: https://lore.kernel.org/r/20200716105416.1423826-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend current infrastructure to store chain page size in a struct
and use it in all functions instead of fixed QED_CHAIN_PAGE_SIZE.
Its value remains the default one, but can be overridden in
qed_chain_init_params before chain allocation.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To simplify qed_chain_alloc() prototype and call sites, introduce struct
qed_chain_init_params to specify chain params, and pass a pointer to
filled struct to the actual qed_chain_alloc() instead of a long list
of separate arguments.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prefetch work in mlx5_ib_prefetch_mr_work can be queued and able to run
concurrently with destruction of the implicit MR. The num_deferred_work
was intended to serialize this, but there is a race:
CPU0 CPU1
mlx5_ib_free_implicit_mr()
xa_erase(odp_mkeys)
synchronize_srcu()
__xa_erase(implicit_children)
mlx5_ib_prefetch_mr_work()
pagefault_mr()
pagefault_implicit_mr()
implicit_get_child_mr()
xa_cmpxchg()
atomic_dec_and_test(num_deferred_mr)
wait_event(imr->q_deferred_work)
ib_umem_odp_release(odp_imr)
kfree(odp_imr)
At this point in mlx5_ib_free_implicit_mr() the implicit_children list is
supposed to be empty forever so that destroy_unused_implicit_child_mr()
and related are not and will not be running.
Since it is not empty the destroy_unused_implicit_child_mr() flow ends up
touching deallocated memory as mlx5_ib_free_implicit_mr() already tore down the
imr parent.
The solution is to flush out the prefetch wq by driving num_deferred_work
to zero after creation of new prefetch work is blocked.
Fixes: 5256edcb98 ("RDMA/mlx5: Rework implicit ODP destroy")
Link: https://lore.kernel.org/r/20200719065435.130722-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Modifying the post-send and post-recv to initialize the wqes slot by slot
dynamically depending on the number of max sges requested by consumer at
the time of QP creation.
Changed the QP creation logic to determine the size of SQ and RQ in 16B
slots based on the number of wqe and number of SGEs requested by consumer
Link: https://lore.kernel.org/r/1594822619-4098-6-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Adding few helper data structure which are useful to initialize hardware
send wqe in variable wqe mode.
Adding a qp flag in HSI to indicate variable wqe is enabled for this qp.
Link: https://lore.kernel.org/r/1594822619-4098-5-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Changing the PSN management memory buffers from statically initialized to
dynamic pull scheme.
During create qp only the start pointers are initialized and during
post-send the psn buffer is pulled based on current producer index.
Adjusting post_send code to accommodate dynamic psn-pull and changing
post_recv code to match post-send code wrt pseudo flush wqe generation.
Link: https://lore.kernel.org/r/1594822619-4098-4-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bnxt_re driver now allocates shadow sq and rq to maintain per wqe
wr_id and few other flags required to support variable wqe. Segregated the
allocation of shadow queue in a separate function and adjust the cqe
polling logic. The new polling logic is based on shadow queue indices.
Link: https://lore.kernel.org/r/1594822619-4098-3-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bnxt_re driver need to decide on how much SQ and RQ memory should to
be allocated and which wqe posting/polling algorithm to use.
Making changes to set the wqe-mode to a default value during device
registration sequence. The wqe-mode is passed to the lower layer driver as
well. Going forward in the lower layer driver wqe-mode will be used to
decide execution path. Initializing the wqe-mode to static wqe type for
now.
Link: https://lore.kernel.org/r/1594822619-4098-2-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed from the common ops and moved to
the RoCE only ops within the qedr driver.
Link: https://lore.kernel.org/r/20200714183414.61069-8-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed.
Link: https://lore.kernel.org/r/20200714183414.61069-7-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed.
Link: https://lore.kernel.org/r/20200714183414.61069-6-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed.
Link: https://lore.kernel.org/r/20200714183414.61069-5-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The query_pkey() isn't mandatory for the iwarp providers, so remove this
requirement from the RDMA core.
Link: https://lore.kernel.org/r/20200714183414.61069-4-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allocate the pkey cache only if the pkey_tbl_len is set by the provider,
also add checks to avoid accessing the pkey cache when it not initialized.
Link: https://lore.kernel.org/r/20200714183414.61069-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
rxe_post_send_kernel() iterates over linked list of wr's, until the
wr->next ptr is NULL. However if we've got an interrupt after last wr is
posted, control may be returned to the code after send completion callback
is executed and wr memory is freed.
As a result, wr->next pointer may contain incorrect value leading to
panic. Store the wr->next on the stack before posting it.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200716190340.23453-1-m.malygin@yadro.com
Signed-off-by: Mikhail Malygin <m.malygin@yadro.com>
Signed-off-by: Sergey Kojushev <s.kojushev@yadro.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
User space should receive the maximum edpm size from kernel driver,
similar to other edpm/ldpm related limits. Add an additional parameter to
the alloc_ucontext_resp structure for the edpm maximum size.
In addition, pass an indication from user-space to kernel
(and not just kernel to user) that the DPM sizes are supported.
This is for supporting backward-forward compatibility between driver and
lib for everything related to DPM transaction and limit sizes.
This should have been part of commit mentioned in Fixes tag.
Link: https://lore.kernel.org/r/20200707063100.3811-3-michal.kalderon@marvell.com
Fixes: 93a3d05f9d ("RDMA/qedr: Add kernel capability flags for dpm enabled mode")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In older FW versions the completion flag was treated as the ack flag in
edpm messages. commit ff937b916e ("qed: Add EDPM mode type for user-fw
compatibility") exposed the FW option of setting which mode the QP is in
by adding a flag to the qedr <-> qed API.
This patch adds the qedr <-> libqedr interface so that the libqedr can set
the flag appropriately and qedr can pass it down to FW. Flag is added for
backward compatibility with libqedr.
For older libs, this flag didn't exist and therefore set to zero.
Fixes: ac1b36e55a ("qedr: Add support for user context verbs")
Link: https://lore.kernel.org/r/20200707063100.3811-2-michal.kalderon@marvell.com
Signed-off-by: Yuval Bason <yuval.bason@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
QP's with the same SRQ, working on different CQs and running in parallel
on different CPUs could lead to a race when maintaining the SRQ consumer
count, and leads to FW running out of SRQs. Update the consumer
atomically. Make sure the wqe_prod is updated after the sge_prod due to
FW requirements.
Fixes: 3491c9e799 ("qedr: Add support for kernel mode SRQ's")
Link: https://lore.kernel.org/r/20200708195526.31040-1-ybason@marvell.com
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Basson <ybason@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current iSER target code allocates MR pool budget based on queue size.
Since there is no handshake between iSER initiator and target on max IO
size, we'll set the iSER target to support upto 16MiB IO operations and
allocate the correct number of RDMA ctxs according to the factor of MR's
per IO operation. This would guarantee sufficient size of the MR pool for
the required IO queue depth and IO size.
Link: https://lore.kernel.org/r/20200708091908.162263-1-maxg@mellanox.com
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Tested-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When using action drop dest_type was never assigned to any value. Add
initialization of dest_type to -1 since 0 is valid.
Fixes: f29de9eee7 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20200707110259.882276-1-leon@kernel.org
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of returning IB_LINK_LAYER_ETHERNET from rxe_link_layer, return it
directly from get_link_layer callback and remove rxe_link_layer().
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-5-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The return value from rxe_mem_init_dma() is always 0 - change it to be
void and fix the callers accordingly.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-4-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The return value from rxe_init_port_param() is always 0 - change it to be
void.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no
need to check if they aren't set.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ROCE uses "VA % buf_page_size" to caclulate the offset in the PBL's first
page, the actual PA corresponding to the MR's VA is equal to MR's PA plus
this offset. The first PA in PBL has already been aligned to PAGE_SIZE
after calling ib_umem_get(), but the MR's VA may not. If the buf_page_size
is smaller than the PAGE_SIZE, this will lead the HW to access the wrong
memory because the offset is smaller than expected.
Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1594726935-45666-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RoCE Engine will schedule to another QP after one has sent
(2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be
calculated from 2 factors:
1. current MTU as a integer
2. the RoCE Engine's maximum slice length 64KB
But the driver use MTU as a enum ib_mtu and the max inline capability, the
lp_pktn_ini will be much bigger than expected which may cause traffic of
some QPs to never get scheduled.
Fixes: b713128de7 ("RDMA/hns: Adjust lp_pktn_ini dynamically")
Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In manual mode allow bind user QPs with different pids to same counter,
since this is allowed in auto mode.
Bind kernel QPs and user QPs to the same counter are not allowed.
Fixes: 1bd8e0a9d0 ("RDMA/counter: Allow manual mode configuration support")
Link: https://lore.kernel.org/r/20200702082933.424537-4-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In auto mode only bind user QPs to a dynamic counter, since this feature
is mainly used for system statistic and diagnostic purpose, while there's
no need to counter kernel QPs so far.
Fixes: 99fa331dc8 ("RDMA/counter: Add "auto" configuration mode support")
Link: https://lore.kernel.org/r/20200702082933.424537-3-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With the "PID" category QPs have same PID will be bound to same counter;
If this category is not set then QPs have different PIDs will be bound
to same counter.
This is implemented for 2 reasons:
1. The counter is a limited resource, while there may be dozens of
applications, each of which creates several types of QPs, which means
it may doesn't have enough counter.
2. The system administrator needs all QPs created by all applications
with same type bound to one counter.
The counter name and PID is only make sense when "PID" category are
configured.
This category can also be used in combine with others, e.g. QP type.
Link: https://lore.kernel.org/r/20200702082933.424537-2-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some released FW versions mistakenly don't set the capability that 50G per
lane link-modes are supported for VFs (ptys_extended_ethernet capability
bit).
Use PTYS.ext_eth_proto_capability instead, as this indication is always
accurate. If PTYS.ext_eth_proto_capability is valid
(has a non-zero value) conclude that the HCA supports 50G per lane.
Otherwise, conclude that the HCA doesn't support 50G per lane.
Fixes: 08e8676f16 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Link: https://lore.kernel.org/r/20200707110612.882962-3-leon@kernel.org
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the initialization of the vendor_part_id to be before calling
ib_register_device(), this is needed because the query_device() callback
is called from the context of ib_register_device() before initializing the
vendor_part_id, so the reported value is wrong.
Fixes: bdcf26bf9b ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200707130931.444724-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge them into their callers, usually the only thing the caller did was
to call the one function, so this is clearer.
Link: https://lore.kernel.org/r/20200702081809.423482-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move DEVX initialization and cleanup flows to the devx.c instead of having
almost empty functions in main.c
Link: https://lore.kernel.org/r/20200702081809.423482-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>