uverbs was blocking srq_types the driver doesn't support based on the
CREATE_XSRQ cmd_mask. Fix all drivers to check for supported srq_types
during create_srq and move CREATE_XSRQ to the core code.
Link: https://lore.kernel.org/r/5-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions all depend on the driver providing a specific op:
- REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op
- ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this
without providing the op
- OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides
xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow.
- OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd()
- CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq()
- QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but
sometimes supplies a NULL op.
- RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op
- ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an
(now deleted) implementation but no userspace
All drivers were checked that no drivers provide the op without also
setting uverbs_cmd_mask so this should have no functional change.
Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since a while now the uverbs layer checks if the driver implements a
function before allowing the ucmd to proceed. This largely obsoletes the
cmd_mask stuff, but there is some tricky bits in drivers preventing it
from being removed.
Remove the easy elements of uverbs_ex_cmd_mask by pre-setting them in the
core code. These are triggered soley based on the related ops function
pointer.
query_device_ex is not triggered based on an op, but all drivers already
implement something compatible with the extension, so enable it globally
too.
Link: https://lore.kernel.org/r/2-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a mlx5 core devlink instance is reloaded in different net namespace,
its associated IB device is deleted and recreated.
Example sequence is:
$ ip netns add foo
$ devlink dev reload pci/0000:00:08.0 netns foo
$ ip netns del foo
mlx5 IB device needs to attach and detach the netdevice to it through the
netdev notifier chain during load and unload sequence. A below call graph
of the unload flow.
cleanup_net()
down_read(&pernet_ops_rwsem); <- first sem acquired
ops_pre_exit_list()
pre_exit()
devlink_pernet_pre_exit()
devlink_reload()
mlx5_devlink_reload_down()
mlx5_unload_one()
[...]
mlx5_ib_remove()
mlx5_ib_unbind_slave_port()
mlx5_remove_netdev_notifier()
unregister_netdevice_notifier()
down_write(&pernet_ops_rwsem);<- recurrsive lock
Hence, when net namespace is deleted, mlx5 reload results in deadlock.
When deadlock occurs, devlink mutex is also held. This not only deadlocks
the mlx5 device under reload, but all the processes which attempt to
access unrelated devlink devices are deadlocked.
Hence, fix this by mlx5 ib driver to register for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.
Fixes: 4383cfcc65 ("net/mlx5: Add devlink reload")
Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code in setup_dma_device has become rather convoluted, move all of
this to the drivers. Drives now pass in a DMA capable struct device which
will be used to setup DMA, or drivers must fully configure the ibdev for
DMA and pass in NULL.
Other than setting the masks in rvt all drivers were doing this already
anyhow.
mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for
DMA based on their hardweare limits in:
__mthca_init_one()
dma_set_max_seg_size (1G)
__mlx4_init_one()
dma_set_max_seg_size (1G)
mlx5_pci_init()
set_dma_caps()
dma_set_max_seg_size (2G)
Other non software drivers (except usnic) were extended to UINT_MAX [1, 2]
instead of 2G as was before.
[1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
[2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org
Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Separate IB_GID_TYPE_IB and IB_GID_TYPE_ROCE to two different values, so
enum ib_gid_type will match the gid types of the new query GID table API
which will be introduced in the following patches.
This change in enum ib_gid_type requires to change also enum
rdma_network_type by separating RDMA_NETWORK_IB and RDMA_NETWORK_ROCE_V1
values.
Link: https://lore.kernel.org/r/20200923165015.2491894-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Sync device with CPU pages upon ODP MR registration. mlx5 already has to
zero the HW's version of the PAS list, may as well deliver a PAS list that
matches the current CPU page tables configuration.
Link: https://lore.kernel.org/r/20200930163828.1336747-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend advice MR to support non faulting mode, this can improve
performance by increasing the populated page tables in the device.
Link: https://lore.kernel.org/r/20200930163828.1336747-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Enable ODP sync without faulting, this improves performance by reducing
the number of page faults in the system.
The gain from this option is that the device page table can be aligned
with the presented pages in the CPU page table without causing page
faults.
As of that, the overhead on data path from hardware point of view to
trigger a fault which end-up by calling the driver to bring the pages
will be dropped.
Link: https://lore.kernel.org/r/20200930163828.1336747-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move to use hmm_range_fault() instead of get_user_pags_remote() to improve
performance in a few aspects:
This includes:
- Dropping the need to allocate and free memory to hold its output
- No need any more to use put_page() to unpin the pages
- The logic to detect contiguous pages is done based on the returned
order, no need to run per page and evaluate.
In addition, moving to use hmm_range_fault() enables to reduce page faults
in the system with it's snapshot mode, this will be introduced in next
patches from this series.
As part of this, cleanup some flows and use the required data structures
to work with hmm_range_fault().
Link: https://lore.kernel.org/r/20200930163828.1336747-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GSI QP can't be created from the user space, hence the udata check is
always false (udata == NULL). Remove that check and simplify the flow.
Link: https://lore.kernel.org/r/20200926102450.2966017-9-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GSI QP doesn't need signal QP type because it is initialized statically to
zero, which is IB_SIGNAL_ALL_WR also wr->send_flags isn't set too. This
means that the GSI QP signal QP type can be removed.
Link: https://lore.kernel.org/r/20200926102450.2966017-5-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no reason to have separate create flow for the GSI QP, while
general create_qp routine has all needed checks and ability to allocate
and free the proper struct mlx5_ib_qp.
Link: https://lore.kernel.org/r/20200926102450.2966017-4-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove duplication of mlx5_ib_qp and mlx5_ib_gsi_qp fields. This change
returns the memory footprint of mlx5_ib QP to be as it was before
embedding GSI QP.
Link: https://lore.kernel.org/r/20200926102450.2966017-3-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The GSI QPs have different create flow from the regular QPs, but it is not
really needed. Update the code to use mlx5_ib_qp as a storage class for
all outside of GSI calls.
Link: https://lore.kernel.org/r/20200926102450.2966017-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sizeof() when applied to a pointer typed expression should give the size
of the pointed data, even if the data is a pointer.
Fixes: e1f24a79f4 ("IB/mlx5: Support congestion related counters")
Link: https://lore.kernel.org/r/20200917081354.2083293-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The restrack is going to manage memory of all IB objects and must be
called before object is created. GSI QP in the mlx5_ib separated between
creating dummy interface and HW object beneath. This was achieved by
double call to ib_create_qp().
In order to skip such reentry call to internal driver create_qp code.
Link: https://lore.kernel.org/r/20200922091106.2152715-3-leon@kernel.org
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Once a mkey is created it can be modified using UMR. This is desirable for
performance reasons. However, different hardware has restrictions on what
modifications are possible using UMR. Make sense of these checks:
- mlx5_ib_can_reconfig_with_umr() returns true if the access flags can be
altered. Most cases create MRs using 0 access flags (now made clear by
consistent use of set_mkc_access_pd_addr_fields()), but the old logic
here was tormented. Make it clear that this is checking if the current
access_flags can be modified using UMR to different access_flags. It is
always OK to use UMR to change flags that all HW supports.
- mlx5_ib_can_load_pas_with_umr() returns true if UMR can be used to
enable and update the PAS/XLT. Enabling requires updating the entity
size, so UMR ends up completely disabled on this old hardware. Make it
clear why it is disabled. FRWR, ODP and cache always requires
mlx5_ib_can_load_pas_with_umr().
- mlx5_ib_pas_fits_in_mr() is used to tell if an existing MR can be
resized to hold a new PAS list. This only works for cached MR's because
we don't store the PAS list size in other cases.
To be very clear, arrange things so any pre-created MR's in the cache
check the newly requested access_flags before allowing the MR to leave the
cache. If UMR cannot set the required access_flags the cache fails to
create the MR.
This in turn means relaxed ordering and atomic are now correctly blocked
early for implicit ODP on older HW.
Link: https://lore.kernel.org/r/20200914112653.345244-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
set_reg_wr() always fails if !umr_modify_entity_size_disabled because
mlx5_ib_can_use_umr() always fails. Without set_reg_wr() IB_WR_REG_MR
doesn't work and that means the device should not advertise
IB_DEVICE_MEM_MGT_EXTENSIONS.
Fixes: 841b07f99a ("IB/mlx5: Block MR WR if UMR is not possible")
Link: https://lore.kernel.org/r/20200914112653.345244-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Any mkey that is not enabled and assigned to userspace should have the PD
set to a kernel owned PD.
When cache entries are created for the first time the PDN is set to 0,
which is probably a kernel PD, but be explicit.
When a MR is registered using the hybrid reg_create with UMR xlt & enable
the disabled mkey is pointing at the user PD, keep it pointing at the
kernel until a UMR enables it and sets the user PD.
Fixes: 9ec4483a3f ("IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache")
Link: https://lore.kernel.org/r/20200914112653.345244-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
alloc_mr_from_cache() no longer returns EAGAIN, this is just dead code
now.
Fixes: aad719dcf3 ("RDMA/mlx5: Allow MRs to be created in the cache synchronously")
Link: https://lore.kernel.org/r/20200914112653.345244-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
This series from Alex extends software steering interface to support
devices with extra capability "sw_owner_2" which will replace existing
"sw_owner".
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_sw_owner_v2:
RDMA/mlx5: Expose TIR and QP ICM address for sw_owner_v2 devices
RDMA/mlx5: Allow DM allocation for sw_owner_v2 enabled devices
RDMA/mlx5: Add sw_owner_v2 bit capability
Leon Romanovsky says:
====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_active_speed':
RDMA: Fix link active_speed size
RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
net/mlx5: Refactor query port speed functions
According to the IB spec active_speed size should be u16 and not u8 as
before. Changing it to allow further extensions in offered speeds.
Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose the ICM address to access TIR and QP, this will allow sw_owned_v2
devices to steer traffic to TIRs and QPs same as done with sw_owner
capability.
Link: https://lore.kernel.org/r/20200903073857.1129166-4-leon@kernel.org
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sw_owner_v2 will replace sw_owner for future devices, this means that if
sw_owner_v2 is set sw_owner should be ignored and DM allocation is
required for sw_owner_v2 devices to function.
Link: https://lore.kernel.org/r/20200903073857.1129166-3-leon@kernel.org
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move allocation and destruction of memory windows under ib_core
responsibility and clean drivers to ensure that no updates to MW
ib_core structures are done in driver layer.
Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Combine two same enums to avoid duplication.
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The functions mlx5_query_port_link_width_oper and
mlx5_query_port_ib_proto_oper are always called together, so combine them
to a new function called mlx5_query_port_oper to avoid duplication.
And while the mlx5i_get_port_settings is the same as
mlx5_query_port_oper therefore let's remove it.
According to the IB spec link_width_oper and ib_proto_oper should be u16
and not as written u8, so perform casting as a preparation to cross-RDMA
patch which will fix that type for all drivers in the RDMA subsystem.
Fixes: ada68c31ba ("net/mlx5: Introduce a new header file for physical port functions")
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
ib_umem_num_pages() should only be used by things working with the SGL in
CPU pages directly.
Drivers building DMA lists should use the new ib_num_dma_blocks() which
returns the number of blocks rdma_umem_for_each_block() will return.
To make this general for DMA drivers requires a different implementation.
Computing DMA block count based on umem->address only works if the
requested page size is < PAGE_SIZE and/or the IOVA == umem->address.
Instead the number of DMA pages should be computed in the IOVA address
space, not umem->address. Thus the IOVA has to be stored inside the umem
so it can be used for these calculations.
For now set it to umem->address by default and fix it up if
ib_umem_find_best_pgsz() was called. This allows drivers to be converted
to ib_umem_num_dma_blocks() safely.
Link: https://lore.kernel.org/r/6-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change counters to return failure like any other verbs destroy, however
this flow shouldn't return error at all.
Link: https://lore.kernel.org/r/20200907120921.476363-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6d ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HW release can fail and leave the system in limbo state, where SRQ is
removed from the table, but can't be destroyed later. In every reentry,
the initial xa_erase_irq() check will fail.
Rewrite the erase logic to keep index, but don't store the entry
itself. By doing it, we can safely reinsert entry back in the case of
destroy failure.
Link: https://lore.kernel.org/r/20200907120921.476363-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other IB verbs objects, AH are refcounted by ib_core. The release
of those objects are controlled by ib_core with promise that AH destroy
can't fail.
Being SW object for now, this change makes dealloc_ah() to behave like any
other destroy IB flows.
Fixes: d345691471 ("RDMA: Handle AH allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IB verbs objects are counted by the kernel and ib_core ensures that
deallocate PD will success so it will be called once all other objects
that depends on PD will be released. This is achieved by managing various
reference counters on such objects.
The mlx5 driver didn't follow this standard flow when allowed DEVX objects
that are not managed by ib_core to be interleaved with the ones under
ib_core responsibility.
In such interleaved scenarios deallocate command can fail and ib_core will
leave uobject in internal DB and attempt to clean it later to free
resources anyway.
This change partially restores returned value from dealloc_pd() for all
drivers, but keeping in mind that non-DEVX devices and kernel verbs paths
shouldn't fail.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ can be destroyed right before mlx5_cmd_get_srq is called.
In such case the latter will return NULL instead of expected SRQ.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200830084010.102381-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV
hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E
LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5
8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6
tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf
CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg
d81lv2c=
=uW/F
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc3' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When DCT QPs work in RoCE LAG mode:
1. DCT creation is allowed only when it is supported
2. The "port" of a DCT QP is assigned in a round-robin way
Link: https://lore.kernel.org/r/20200818115245.700581-3-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
DCI QP supports tx_affinity as well.
Link: https://lore.kernel.org/r/20200818115245.700581-2-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to allow sniffer when the RDMA device is in switchdev mode, we
don't need to set the source port when creating the sniffer rule.
Link: https://lore.kernel.org/r/20200803060214.15328-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Support 56, 25, 100, 200 and 50Gbps IB rates in mlx5 driver.
Link: https://lore.kernel.org/r/20200802081712.1993490-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The "domain" argument is constant and modern device (mlx5) doesn't support
anything except IB_FLOW_DOMAIN_USER, so delete this extra parameter and
simplify code.
Link: https://lore.kernel.org/r/20200730081235.1581127-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Improve readability of fs.c by converting multiple else-if constructions
to be implemented with switch keyword.
Link: https://lore.kernel.org/r/20200730081235.1581127-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Smaller set of RDMA updates. A smaller number of 'big topics' with the
majority of changes being driver updates.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob for
device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it off.
Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of a
device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed
-----BEGIN PGP SIGNATURE-----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=0z2L
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
For RDMA TX flow table, set destination type to be 'port' and prevent
creation of flows with TIR destination.
As RDMA TX is an egress flow table the rules on this flow table should
not forward traffic back to the NIC and should set the destination to be
the port.
Without the setting of this destination type flow rules on the RDMA TX
flow tables are not created as FW invokes a syndrome for undefined
destination for the rule.
Fixes: 24670b1a31 ("net/mlx5: Add support for RDMA TX steering")
Link: https://lore.kernel.org/r/20200803055849.14947-1-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Scatter CQE feature relies on two flags MLX5_QP_FLAG_SCATTER_CQE and
MLX5_QP_FLAG_ALLOW_SCATTER_CQE, both of them can be provided without
relation to device capability.
Relax global validity check to allow MLX5_QP_FLAG_ALLOW_SCATTER_CQE QP
flag.
Existing user applications are failing on this new validity check.
Fixes: 90ecb37a75 ("RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags")
Fixes: 37518fa49f ("RDMA/mlx5: Process all vendor flags in one place")
Link: https://lore.kernel.org/r/20200728120255.805733-1-leon@kernel.org
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
destroy_prefetch_work() must always be called if the work is not going
to be queued. The num_sge also should have been set to i, not i-1
which avoids the condition where it shouldn't have been called in the
first place.
Cc: stable@vger.kernel.org
Fixes: fb985e278a ("RDMA/mlx5: Use SRCU properly in ODP prefetch")
Link: https://lore.kernel.org/r/20200727095712.495652-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Meir Lichtinger says:
====================
ConnectX-7 supports setting relaxed ordering read/write mkey attribute by
UMR, indicated by new HCA capabilities, so extend mlx5_ib driver to
configure UMR control segment
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_uar':
RDMA/mlx5: Set mkey relaxed ordering by UMR with ConnectX-7
RDMA/mlx5: Use MLX5_SET macro instead of local structure
RDMA/mlx5: ConnectX-7 new capabilities to set relaxed ordering by UMR
Up to ConnectX-7 UMR is not used when user passes relaxed ordering access
flag. ConnectX-7 supports setting relaxed ordering read/write mkey
attribute by UMR, indicated by new HCA capabilities.
With ConnectX-7 driver uses UMR when user set relaxed ordering access
flag, in contrast to previous silicon models. Specifically it includes
setting relvant flags of mkey context mask in UMR control segment, and
relaxed ordering write and read flags in UMR mkey context segment.
Link: https://lore.kernel.org/r/20200716105248.1423452-4-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use generic mlx5 structure defined in mlx5_ifc.h to represent ConnectX
device data structures instead of using structure defined specifically for
mlx5_ib module.
Link: https://lore.kernel.org/r/20200716105248.1423452-3-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the SQ is set to a ready state when the RAW QP is modified to
INIT. When the TIS is modified, e.g. to change the lag_tx_affinity, then
SQs which are already in the ready state will not be affected.
Open a window to modify the SQ behavior by setting the SQ as ready only
when QP was modified to RTS.
Link: https://lore.kernel.org/r/20200716105416.1423826-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Prefetch work in mlx5_ib_prefetch_mr_work can be queued and able to run
concurrently with destruction of the implicit MR. The num_deferred_work
was intended to serialize this, but there is a race:
CPU0 CPU1
mlx5_ib_free_implicit_mr()
xa_erase(odp_mkeys)
synchronize_srcu()
__xa_erase(implicit_children)
mlx5_ib_prefetch_mr_work()
pagefault_mr()
pagefault_implicit_mr()
implicit_get_child_mr()
xa_cmpxchg()
atomic_dec_and_test(num_deferred_mr)
wait_event(imr->q_deferred_work)
ib_umem_odp_release(odp_imr)
kfree(odp_imr)
At this point in mlx5_ib_free_implicit_mr() the implicit_children list is
supposed to be empty forever so that destroy_unused_implicit_child_mr()
and related are not and will not be running.
Since it is not empty the destroy_unused_implicit_child_mr() flow ends up
touching deallocated memory as mlx5_ib_free_implicit_mr() already tore down the
imr parent.
The solution is to flush out the prefetch wq by driving num_deferred_work
to zero after creation of new prefetch work is blocked.
Fixes: 5256edcb98 ("RDMA/mlx5: Rework implicit ODP destroy")
Link: https://lore.kernel.org/r/20200719065435.130722-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
When using action drop dest_type was never assigned to any value. Add
initialization of dest_type to -1 since 0 is valid.
Fixes: f29de9eee7 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20200707110259.882276-1-leon@kernel.org
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some released FW versions mistakenly don't set the capability that 50G per
lane link-modes are supported for VFs (ptys_extended_ethernet capability
bit).
Use PTYS.ext_eth_proto_capability instead, as this indication is always
accurate. If PTYS.ext_eth_proto_capability is valid
(has a non-zero value) conclude that the HCA supports 50G per lane.
Otherwise, conclude that the HCA doesn't support 50G per lane.
Fixes: 08e8676f16 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Link: https://lore.kernel.org/r/20200707110612.882962-3-leon@kernel.org
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge them into their callers, usually the only thing the caller did was
to call the one function, so this is clearer.
Link: https://lore.kernel.org/r/20200702081809.423482-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move DEVX initialization and cleanup flows to the devx.c instead of having
almost empty functions in main.c
Link: https://lore.kernel.org/r/20200702081809.423482-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move flow steering logic to be in separate file and rename flow.c to be
fs.c because it is better describe the content.
Link: https://lore.kernel.org/r/20200702081809.423482-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are number of counters types supported in mlx5_ib: HW counters,
congestion counters, Q-counters and flow counters. Almost all supporting
code was placed in main.c that made almost impossible to maintain the code
anymore. Let's create separate code namespace for the counters to easy
future generalization effort.
Link: https://lore.kernel.org/r/20200702081809.423482-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The restrack code has separate .c, so move callbacks initialization to
that file to improve code locality.
Link: https://lore.kernel.org/r/20200702081809.423482-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx5_ib_enable_driver() is local function and doesn't need to be
shared in mlx5_ib, so change it's signature to have static keyword in it.
Link: https://lore.kernel.org/r/20200702081809.423482-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update the code to allocate and free ib_xrcd structure in the
ib_core instead of inside drivers.
Link: https://lore.kernel.org/r/20200630101855.368895-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce UAPI to query PD attributes, this can be used to retrieve PD
attributes by having the PD handle of the created one and owning the
command FD for the ucontxet.
Link: https://lore.kernel.org/r/20200630093916.332097-7-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the query ucontext functionality by returning the original
ucontext data as part of an extra mlx5 attribute that holds the driver
UAPI response.
Link: https://lore.kernel.org/r/20200630093916.332097-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor mlx5_ib_alloc_ucontext() to set its response fields in a
cleaner way.
It includes,
- Move the relevant code to a self contained function.
- Calculate the response length once and drop redundant code all around.
- Reuse previously set ucontext fields once preparing the response.
The self contained function will be used in next patch as part of
implementing the query ucontext functionality.
Link: https://lore.kernel.org/r/20200630093916.332097-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx5_ib creates XRC domain and uses for creating internal SRQ.
However all that is needed is XRCD number and not full blown ib_xrcd
objects.
Update the code to get and store the number only.
Link: https://lore.kernel.org/r/20200706122716.647338-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allocating an MR flow can only be initiated by kernel users, and not from
userspace so a udata parameter is redundant.
Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For debugging purpose it will be easier to understand if prefetch works
okay if it has its own counter. Introduce ODP prefetch counter and count
per MR the total number of prefetched pages.
In addition remove comment which is not relevant anymore and anyway not in
the correct place.
Link: https://lore.kernel.org/r/20200621104147.53795-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Legacy IPoIB sets IB_QP_CREATE_NETIF_QP QP create flag and because mlx5
doesn't use this flag, the process_create_flags() failed to create IPoIB
QPs.
Fixes: 2978975ce7 ("RDMA/mlx5: Process create QP flags in one place")
Link: https://lore.kernel.org/r/20200630122147.445847-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to get MR (mkey) resource dump in RAW format.
Link: https://lore.kernel.org/r/20200623113043.1228482-12-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to get CQ resource dump in RAW format.
Link: https://lore.kernel.org/r/20200623113043.1228482-11-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a generic function to use the resource dump mechanism to get the
QP resource data.
Link: https://lore.kernel.org/r/20200623113043.1228482-10-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a MR, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
create_flags checks was refactored and broke the creation on integrity
enabled QPs and actually broke the NVMe/RDMA and iSER ULP's when using
mlx5 driven devices.
Fixes: 2978975ce7 ("RDMA/mlx5: Process create QP flags in one place")
Link: https://lore.kernel.org/r/20200617130230.2846915-1-leon@kernel.org
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Like any other QP type, rely on FW for the RAW_PACKET QPs to decide if ECE
is supported or not. This fixes an inability to create RAW_PACKET QPs with
latest rdma-core with the ECE support.
Fixes: e383085c24 ("RDMA/mlx5: Set ECE options during QP create")
Link: https://lore.kernel.org/r/20200618112507.3453496-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remote gid is not copied to the right address. Fix it by using
rdma_ah_set_dgid_raw to copy the remote gid value from the QP context on
query QP.
Fixes: 70bd7fb876 ("RDMA/mlx5: Remove manually crafted QP context the query call")
Link: https://lore.kernel.org/r/20200618112507.3453496-3-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
destroy_qp_common is called for flows where QP is already created by
HW. While it is called from IB/core, the ibqp.* fields will be fully
initialized, but it is not the case if this function is called during QP
creation.
Don't rely on ibqp fields as much as possible and initialize
send_cq/recv_cq as temporal solution till all drivers will be converted to
IB/core QP allocation scheme.
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 5372 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 5372 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
mlx5_core_put_rsc+0x70/0x80
destroy_resource_common+0x8e/0xb0
mlx5_core_destroy_qp+0xaf/0x1d0
mlx5_ib_destroy_qp+0xeb0/0x1460
ib_destroy_qp_user+0x2d5/0x7d0
create_qp+0xed3/0x2130
ib_uverbs_create_qp+0x13e/0x190
? ib_uverbs_ex_create_qp
ib_uverbs_write+0xaa5/0xdf0
__vfs_write+0x7c/0x100
ksys_write+0xc8/0x200
do_syscall_64+0x9c/0x390
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 08d5397660 ("RDMA/mlx5: Copy response to the user in one place")
Link: https://lore.kernel.org/r/20200617130148.2846643-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Missed steps during ECE handshake left userspace application with less
options for the ECE handshake. Pass ECE options in the additional
transitions.
Fixes: 50aec2c313 ("RDMA/mlx5: Return ECE data after modify QP")
Link: https://lore.kernel.org/r/20200616104536.2426384-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The assignment to resp.response_length is never read since it is being
updated again on the next statement. The assignment is redundant so
removed it.
Fixes: a645a89d9a ("RDMA/mlx5: Return ECE DC support")
Link: https://lore.kernel.org/r/20200604143902.56021-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A few large, long discussed works this time. The RNBD block driver has
been posted for nearly two years now, and the removal of FMR has been a
recurring discussion theme for a long time. The usual smattering of
features and bug fixes.
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and a
mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block RDMA
device specific to ionos's cloud environment. It brings strong multipath
and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs and
drivers. FRWR should be preferred for at least a decade now.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl7X/IwACgkQOG33FX4g
mxp2uw/+MI2S/aXqEBvZfTT8yrkAwqYezS0VeTDnwH/T6UlTMDhHVN/2Ji3tbbX3
FEKT1i2mnAL5RqUAL1lr9g4sG/bVozrpN46Ws5Lu9dTbIPLKTNPWDuLFQDUShKY7
OyMI/bRx6anGnsOy20iiBqnrQbrrZj5TECgnmrkAl62QFdcl7aBWe/yYjy4CT11N
ub+aBXBREN1F1pc0HIjd2tI+8gnZc+mNm1LVVDRH9Capun/pI26qDNh7e6QwGyIo
n8ItraC8znLwv/nsUoTE7/JRcsTEe6vJI26PQmczZfNJs/4O65G7fZg0eSBseZYi
qKf7Uwtb3qW0R7jRUMEgFY4DKXVAA0G2ph40HXBuzOSsqlT6HqYMO2wgG8pJkrTc
qAjoSJGzfAHIsjxzxKI8wKuufCddjCm30VWWU7EKeriI6h1J0uPVqKkQMfYBTkik
696eZSBycAVgwayOng3XaehiTxOL7qGMTjUpDjUR6UscbiPG919vP+QsbIUuBXdb
YoddBQJdyGJiaCXv32ciJjo9bjPRRi/bII7Q5qzCNI2mi4ZVbudF4ffzyQvdHtNJ
nGnpRXoPi7kMvUrKTMPWkFjj0R5/UsPszsA51zbxPydfgBe0Dlc2PrrIG8dlzYAp
wbV0Lec+iJucKlt7EZtrjz1xOiOOaQt/5/cW1bWqL+wk2t6gAuY=
=9zTe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
The FW returns zeros in case feature is not enabled, but it is better to
have the capability check and ensure that returned result is cleared.
Fixes: 3e09a427ae ("RDMA/mlx5: Get ECE options from FW during create QP")
Link: https://lore.kernel.org/r/20200602125548.172654-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In theoretical event, the ib_copy_to_udata() can fail, so return -EFAULT
error to the user, so he will destroy the QP.
Fixes: 50aec2c313 ("RDMA/mlx5: Return ECE data after modify QP")
Link: https://lore.kernel.org/r/20200602125548.172654-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove a few leftovers from FMR functionality which are no longer used.
Link: https://lore.kernel.org/r/5-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5: Add ability to read and write ECE options
net/mlx5: Add support for RDMA TX FT headers modifying
net/mlx5: Move iseg access helper routines close to mlx5_core driver
net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits
net/mlx5: Add support in forward to namespace
{IB/net}/mlx5: Simplify don't trap code
net/mlx5: Replace zero-length array with flexible-array
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The mlx5 VF driver doesn't set QP tx port affinity because it doesn't know
if the lag is active or not, since the "lag_active" works only for PF
interfaces. In this case for VF interfaces only one lag is used which
brings performance issue.
Add a lag_tx_port_affinity CAP bit; When it is enabled and
"num_lag_ports > 1", then driver always set QP tx affinity, regardless
of lag state.
Link: https://lore.kernel.org/r/20200527055014.355093-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
After users sets the ECE option, FW will return the agreed/supported bits
through an output structures of modify QP stages for regular QPs or
through create QP for the DCT.
Link: https://lore.kernel.org/r/20200526115440.205922-9-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The most common way to set ECE option will be during modify QP command in
INIT2RTR, RTR2RTS and RTS2RTS stages, so update mlx5 to support it.
The new bit in the comp_mask is needed to mark that kernel supports ECE
and can receive data instead of "reserved" field in the struct
mlx5_ib_modify_qp.
Link: https://lore.kernel.org/r/20200526115440.205922-8-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of hand crafted mlx5_qp_context and mlx5_qp_path use common
MLX5_SET() macros.
Link: https://lore.kernel.org/r/20200526115440.205922-7-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As a preparation to removal hand crafted mlx5_qp_context, convert
query_qp_attr() to use proper MLX5_GET() macros.
Link: https://lore.kernel.org/r/20200526115440.205922-6-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As a preparation to removal hand crafted mlx5_qp_context, convert counter
code to use mlx5_cmd_exec_in() directly.
Link: https://lore.kernel.org/r/20200526115440.205922-5-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow users to ask creation of QPs with specific ECE options. Such early
set even before RDMA-CM connection is established is useful if user knows
exactly which option he needs.
Link: https://lore.kernel.org/r/20200526115440.205922-4-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Supported ECE options are returned from FW in the create_qp phase and zero
means that field is not valid. Such default value allows us to reuse
reserved field without worries about comp_mask.
Update create QP API to return ECE options.
Link: https://lore.kernel.org/r/20200526115440.205922-3-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* branch 'mellanox/mlx5-next':
net/mlx5: Add ability to read and write ECE options
net/mlx5: Add support for RDMA TX FT headers modifying
net/mlx5: Move iseg access helper routines close to mlx5_core driver
net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit citied in the Fixes line wasn't complete and solved
only part of the problems. Update the mlx5_ib to properly support
MLX5_CMD_OP_INIT2INIT_QP command in the DEVX, that is required when
modify the QP tx_port_affinity.
Fixes: 819f7427ba ("RDMA/mlx5: Add init2init as a modify command")
Link: https://lore.kernel.org/r/20200527135703.482501-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While creating a uobject every create reaches a point where the uobject is
fully initialized. For ioctls that go on to copy_to_user this means they
need to open code the destruction of a fully created uobject - ie the
RDMA_REMOVE_DESTROY sort of flow.
Open coding this creates bugs, eg the CQ does not properly flush the
events list when it does its error unwind.
Provide a uverbs_finalize_uobj_create() function which indicates that the
uobject is fully initialized and that abort should call to destroy_hw to
destroy the uobj->object and related.
Methods can call this function if they go on to have error cases after
setting uobj->object. Once done those error cases can simply do return,
without an error unwind.
Link: https://lore.kernel.org/r/20200519072711.257271-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7BzV8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg8EH/A2pXMTxtc96RI4S
sttEsUQqbakFS0Z/2tQPpMGr/qW2e5eHgsTX/a3SiUeZiIXk6f4lMFkMuctzBf7p
X77cNEDwGOEdbtCXTsMcmKSde7sP2zCXsPB8xTWLyE6rnaFRgikwwkeqgkIKhp1h
bvOQV0t9HNGvxGAM0iZeOvQAvFl4vd7nS123/MYbir9cugfQUSJRueQ4BiCiJqVE
6cNA7/vFzDJuFGszzIrJ7HXn/IdQMMWHkvTDjgBw0GZw1mDbGFbfbZwOeTz1ojCt
smUQ4tIFxBa/VA5zx7dOy2P2keHbSVf4VLkZRPcceT7OqVS65ETmFDp+qt5NdWM5
vZ8+7/0=
=CyYH
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc6' into rdma.git for-next
Linux 5.7-rc6
Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.
Required for dependencies in the following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Missing INIT2INIT entry in the list of modify commands caused DEVX
applications to be unable to modify_qp for this transition state. Add the
MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes.
Fixes: e662e14d80 ("IB/mlx5: Add DEVX support for modify and query commands")
Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Support adding header modifying actions to the RDMA TX flow table.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Current description doesn't include new devices, change it by updating to
have more generic description and remove DRIVER_NAME and DRIVER_VERSION
defines.
Link: https://lore.kernel.org/r/20200513095304.210240-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The output buffer used in mlx5_cmd_exec_inout() was wrongly changed from
pre-allocated srq_out pointer to an input "out" point. That leads to
unpredictable results in the get_srqc() call later.
Fixes: 31578defe4 ("RDMA/mlx5: Update mlx5_ib to use new cmd interface")
Link: https://lore.kernel.org/r/20200513100809.246315-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When drop action is used the matching packet will stop processing in
steering and will be dropped. This functionality will allow users to drop
matching packets.
Link: https://lore.kernel.org/r/20200504054227.271486-1-leon@kernel.org
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User can configure default miss rule in order to skip matching in the user
domain and forward the packet to the kernel steering domain. When user
requests a default miss rule, we add steering rule to forward the traffic
to the next namespace.
Link: https://lore.kernel.org/r/20200504053012.270689-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move part of the code that get the destinations into function so the code
will be more readable. In addition change the variables definition to be
in reversed christmas tree.
Link: https://lore.kernel.org/r/20200504053012.270689-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* branch 'mellanox/mlx5-next':
net/mlx5: Add support in forward to namespace
{IB/net}/mlx5: Simplify don't trap code
net/mlx5: Replace zero-length array with flexible-array
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The fs_core already supports creation of rules with multiple
actions/destinations. Refactor fs_core to handle the case
when don't trap rule is created with destination. Adapt the
calling code in the driver.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The variable rcqe_sz is being unnecessarily assigned twice, fix this by
removing one of the duplicates.
Fixes: 8bde2c509e ("RDMA/mlx5: Update all DRIVER QP places to use QP subtype")
Link: https://lore.kernel.org/r/20200507151610.52636-1-colin.king@canonical.com
Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When operating in switchdev mode or using devlink to disable RoCE
only raw Ethernet QPs are allowed to be created.
When in switchdev mode this can lead to passing an invalid port number
as part of the modify qp firmware cmd and will lead to a syndrome
reported back to the user, such as:
* mlx5_cmd_check:803:(pid 50148): RST2INIT_QP(0x502) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x177405).
Internal UD QP might be used to test for write combining support (even if
externally we report RoCE as disabled) check for that specific flag and
allow is specifically.
Fixes: b5ca15ad7e ("IB/mlx5: Add proper representors support")
Link: https://lore.kernel.org/r/20200506071602.7177-3-leon@kernel.org
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Assign the profile to the IB device before executing stages. This will
allow to check which profile is being used from within a stage.
Link: https://lore.kernel.org/r/20200506071602.7177-2-leon@kernel.org
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add small helpers in order to avoid code duplication and improve code
readability. Decrease the amount of code in the gigantic post_send
function and divide it to readable methods that will help in code
maintenance in the future.
Link: https://lore.kernel.org/r/20200506065513.4668-3-leon@kernel.org
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reuse newly introduced mlx5_cmd_exec_in() and mlx5_cmd_exec_inout() to
reduce code duplication in mlx5_ib module.
Link: https://lore.kernel.org/r/20200506065513.4668-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Calculate UDP source port based on the grh.flow_label. If grh.flow_label
is not valid, we will use minimal supported UDP source port.
Link: https://lore.kernel.org/r/20200504051935.269708-6-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Calculate and set UDP source port based on the flow label. If flow label
is not defined in GRH then calculate it based on lqpn/rqpn.
Link: https://lore.kernel.org/r/20200504051935.269708-4-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The patch sets the lag tx affinity of the data QPs and the GSI QPs
according to the LAG xmit slave.
For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI
QPs, one for each physical port. When the driver selects the GSI QP, it
will consider the port affinity result. For connected QPs, the driver
sets the affinity of the xmit slave.
The above, ensures that RC QP and it's corresponding GSI QP will transmit
from the same physical port.
Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move affinity related code in modify qp to function. It's a preparation
for next patch the extend the affinity calculation to consider the xmit
slave.
Link: https://lore.kernel.org/r/20200430192146.12863-16-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.
Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
RAW packet QP and underlay QP must be created with either
RQ or SQ, check that.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200427154636.381474-37-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Finish separation to blocks of mlx5_ib_create_qp() functions,
so all internal create QP implementation are located in one place.
Link: https://lore.kernel.org/r/20200427154636.381474-36-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
After major refactoring in create QP flow, it is no needed to call
to destroy QP in XRC_TGT flow.
Link: https://lore.kernel.org/r/20200427154636.381474-35-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update all the places in create QP flows to copy response
to the user in one place.
Link: https://lore.kernel.org/r/20200427154636.381474-34-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Place in one function all udata size checks. This will allow
us move ib_copy_to_udata() in general place and ensure that
it will be performed after call to the FW.
Link: https://lore.kernel.org/r/20200427154636.381474-33-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move check that user didn't supplied RSS RAW QP unsupported
command flags to the function that checks all such flags.
Link: https://lore.kernel.org/r/20200427154636.381474-32-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The amount of parameters passed in and out between internal mlx5
create QP functions is too large to easily follow the flow. Change
it by grouping all create QP parameter into one structure.
Link: https://lore.kernel.org/r/20200427154636.381474-31-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Delete both PD argument and checks if udata was provided, in favour
of unified destroy QP functions.
Link: https://lore.kernel.org/r/20200427154636.381474-30-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The kernel and user create QP flows have very little common code,
separate them to simplify the future work of creating per-type
create_*_qp() functions.
Link: https://lore.kernel.org/r/20200427154636.381474-29-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
XRC_TGT QP doesn't fail into kernel or user flow separation. It is
initiated by the user, but is created through in-kernel verbs flow
and doesn't have PD and udata in similar way to kernel QPs.
So let's separate creation of that QP type from the common flow.
Link: https://lore.kernel.org/r/20200427154636.381474-28-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove duplication in parsing of DEVX UID.
Link: https://lore.kernel.org/r/20200427154636.381474-27-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The inlen is set to be above zero in all flows before
and can't be negative at this stage.
Link: https://lore.kernel.org/r/20200427154636.381474-26-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of keeping special field to separate kernel/user create/destroy
flows, rely on existence of udata pointer. All allocation flows are
using kzalloc() and leave uninitialized pointers as NULL which makes
MLX5_QP_EMPTY and MLX5_QP_KERNEL flows to be the same.
Link: https://lore.kernel.org/r/20200427154636.381474-25-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Combine copy_from_user() from create_user_qp() and general code.
Link: https://lore.kernel.org/r/20200427154636.381474-24-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change the create QP flow to handle all copy_from_user() operations in
one place.
Link: https://lore.kernel.org/r/20200427154636.381474-23-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perform check of attributes of RAW PACKET QP in separate function.
Link: https://lore.kernel.org/r/20200427154636.381474-22-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
QP type is stored in the IB/core QP struct, but it doesn't have all the
needed information, like internal QP type used in the driver itself.
Update mlx5_ib to have cached QP type which includes both IBTA and
Mellanox specific one.
Such change allows us to make even further cleanup of QP creation flow.
Link: https://lore.kernel.org/r/20200427154636.381474-21-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to explicitly check unsupported QP types,
rely on "default" keyword in switch-case to catch them.
Link: https://lore.kernel.org/r/20200427154636.381474-20-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky says:
====================
This is first part of series which tries to return some sanity to
mlx5_ib_create_qp() function. Such refactoring is required to make
extension of that function with less worries of breaking driver.
Extra goal of such refactoring is to ensure that QP is allocated at the
beginning of function and released at the end. It will allow us to move QP
allocation to be under IB/core responsibility.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_ib_qp_refactor_1': (66 commits)
RDMA/mlx5: Process all vendor flags in one place
RDMA/mlx5: Return all configured create flags through query QP
RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags
RDMA/mlx5: Use flags_en mechanism to mark QP created with WQE signature
RDMA/mlx5: Process create QP flags in one place
RDMA/mlx5: Delete create QP flags obfuscation
RDMA/mlx5: Initial separation of RAW_PACKET QP from common flow
RDMA/mlx5: Remove second copy from user for non RSS RAW QPs
RDMA/mlx5: Move DRIVER QP flags check into separate function
RDMA/mlx5: Update all DRIVER QP places to use QP subtype
RDMA/mlx5: Split scatter CQE configuration for DCT QP
RDMA/mlx5: Separate create QP flows to be based on type
RDMA/mlx5: Set QP subtype immediately when it is known
RDMA/mlx5: Avoid setting redundant NULL for XRC QPs
RDMA/mlx5: Prepare QP allocation for future removal
RDMA/mlx5: Perform check if QP creation flow is valid
RDMA/mlx5: Delete impossible GSI port check
RDMA/mlx5: Organize QP types checks in one place
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Check that vendor flags provided through ucmd are valid.
Link: https://lore.kernel.org/r/20200427154636.381474-19-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The "flags" field in struct mlx5_ib_qp contains all UAPI flags
configured at the create QP stage. Return all the data as is
without masking.
Link: https://lore.kernel.org/r/20200427154636.381474-18-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In similar way to wqe_sig, the scat_cqe was treated differently from
other create QP vendor flags. Change it to be similar to other flags
and use flags_en mechanism.
Link: https://lore.kernel.org/r/20200427154636.381474-17-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
MLX5_QP_FLAG_SIGNATURE is exposed to the users but in the kernel
the create_qp flow treated it differently from other MLX5_QP_FLAG_*s.
Fix it by ditching wq_sig boolean variable and use general flag_en
mechanism.
Link: https://lore.kernel.org/r/20200427154636.381474-16-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
create_flags is checked in too many places and scattered across all
the code, consolidate all the checks inside one function, so we will
be easily see the flow. As part of such change, delete unreachable code,
because IB/core is responsible sanitize the input.
Link: https://lore.kernel.org/r/20200427154636.381474-15-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no point in redefinition of stable and exposed to users create
flags. Their values won't be changed and it is equal to used by the
mlx5. Delete the mlx5 definitions and use IB/core fields.
Link: https://lore.kernel.org/r/20200427154636.381474-14-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Create initial function for IB_QPT_RAW_PACKET flow.
Link: https://lore.kernel.org/r/20200427154636.381474-13-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change the common code to use already copied user command buffer.
Link: https://lore.kernel.org/r/20200427154636.381474-12-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perform validation of DRIVER QP in relevant function.
Link: https://lore.kernel.org/r/20200427154636.381474-11-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of overwriting QP init attributes with driver QP subtype,
use that subtype directly. This change will allow us to remove
logic which cached QP init attributes.
Link: https://lore.kernel.org/r/20200427154636.381474-10-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
DCT QPs have separate creation flow and can be easily extracted
from configure_responder_scat_cqe(), this makes both updated
functions more clear.
Link: https://lore.kernel.org/r/20200427154636.381474-9-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move driver QP creation flow to separate functions to simplify
the create_qp() and allow future separation of create_qp_common()
to subtypes.
Link: https://lore.kernel.org/r/20200427154636.381474-8-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to delay QP subtype assignment to the end of the
create_qp() function and it is better to move it to be immediately
after it is checked so we would be able to rewrite later checks
to be based on it and not on over-written struct ib_qp_init_attr.
Link: https://lore.kernel.org/r/20200427154636.381474-7-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to set NULL in recv_cq and send_cq, they are already
set to NULL by the IB/core logic.
Link: https://lore.kernel.org/r/20200427154636.381474-6-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Unify the QP memory allocation across different paths,
so it will be in one place.
Link: https://lore.kernel.org/r/20200427154636.381474-5-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fast check that kernel and user flows provides enough
data to create QP.
Link: https://lore.kernel.org/r/20200427154636.381474-4-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
GSI QP is created in the kernel with very strict parameters,
there is no possible way that port number will be wrong in
such flow.
Link: https://lore.kernel.org/r/20200427154636.381474-3-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perform check if QP type is supported in one place at the beginning of
the create_qp function instead of current implementation with checks
buried inside of the code.
Link: https://lore.kernel.org/r/20200427154636.381474-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The imm_inval_pkey field can hold four different types of data,
depends on the usage, the data could be one of the below:
- Immediate field of the received message
- Invalidate rkey
- Pkey of the packet
- Flow table metadata
Current implementation doesn't reflect the intended usage of the
field at usage time.
Reflect the different types by replace this field with a union,
modify code where this field is used to reflect its intended
usage.
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The alignment value is part of the input structure, so use it and spare
extra memory allocation when is not needed.
Now, using the new ability when allocating icm for Direct-Rule
insertion.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add COPY type to modify_header action. IPsec feature is the first
feature that needs COPY steering action.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
GRH fields such as sgid_index, hop limit, et. are set in the QP context
when QP is created/modified.
Currently, when query QP is performed, we fill the GRH fields only if the
GRH bit is set in the QP context, but this bit is not set for RoCE. Adjust
the check so we will set all relevant data for the RoCE too.
Since this data is returned to userspace, the below is an ABI regression.
Fixes: d8966fcd4c ("IB/core: Use rdma_ah_attr accessor functions")
Link: https://lore.kernel.org/r/20200413132028.930109-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The mlx5_core doesn't need any functionality coded in qp.c, so move
that file to drivers/infiniband/ be under mlx5_ib responsibility.
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Sort .o objects in makefile to make addition of new object
less cumbersome.
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The structures defined in the cmd header are not used and can be safely
removed from the driver. This patch removes that file and deletes all
relevant includes.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Remove mlx5_ib implementation of Q counter allocation logic
together with cleaning boolean which controlled validity of the
counter. It is not needed, because counter_id == 0 means that
counter is not valid.
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
mlx5 core users are encouraged to use low level API (mlx5_cmd_exec)
without the need of helper functions, do this for q counters, remove
helper functions and call mlx5_cmd_exec directly from users.
This will help reduce the total amount of code and reduction of the
mlx5_core symbol table.
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Fix udata response upon SRQ creation to use the UAPI structure (i.e.
mlx5_ib_create_srq_resp). It did not zero the reserved field in userspace.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200406173540.1466477-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The majority of the patches are cleanups, refactorings and clarity
improvements
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the new
ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces
-----BEGIN PGP SIGNATURE-----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=ae+a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The majority of the patches are cleanups, refactorings and clarity
improvements.
This cycle saw some more activity from Syzkaller, I think we are now
clean on all but one of those bugs, including the long standing and
obnoxious rdma_cm locking design defect. Continue to see many drivers
getting cleanups, with a few new user visible features.
Summary:
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't
working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the
new ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits)
RDMA/bnxt_re: make bnxt_re_ib_init static
IB/qib: Delete struct qib_ivdev.qp_rnd
RDMA/hns: Fix uninitialized variable bug
RDMA/hns: Modify the mask of QP number for CQE of hip08
RDMA/hns: Reduce the maximum number of extend SGE per WQE
RDMA/hns: Reduce PFC frames in congestion scenarios
RDMA/mlx5: Add support for RDMA TX flow table
net/mlx5: Add support for RDMA TX steering
IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
IB/hfi1: Fix memory leaks in sysfs registration and unregistration
IB/mlx5: Move to fully dynamic UAR mode once user space supports it
IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib
IB/mlx5: Extend QP creation to get uar page index from user space
IB/mlx5: Extend CQ creation to get uar page index from user space
IB/mlx5: Expose UAR object and its alloc/destroy commands
IB/hfi1: Get rid of a warning
RDMA/hns: Remove redundant judgment of qp_type
RDMA/hns: Remove redundant assignment of wc->smac when polling cq
RDMA/hns: Remove redundant qpc setup operations
RDMA/hns: Remove meaningless prints
...
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
mlx5: Remove uninitialized use of key in mlx5_core_create_mkey
{IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib
{IB,net}/mlx5: Assign mkey variant in mlx5_ib only
{IB,net}/mlx5: Setup mkey variant before mr create command invocation
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Leon Romanovsky says:
====================
Those two patches from Michael extends mlx5_core and mlx5_ib flow steering
to support RDMA TX in similar way to already supported RDMA RX.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_tx_steering':
RDMA/mlx5: Add support for RDMA TX flow table
net/mlx5: Add support for RDMA TX steering
Enable user application to add rules for RDMA TX steering table.
Rules in this steering table will allow to steer transmitted RDMA
traffic.
Link: https://lore.kernel.org/r/20200324061425.1570190-3-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move to fully dynamic UAR mode once user space supports it. In this case
we prevent any legacy mode of UARs on the allocated context and prevent
redundant allocation of the static ones.
Link: https://lore.kernel.org/r/20200324060143.1569116-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
struct mlx5_bfreg_info is used by mlx5_ib only but is exposed to both RDMA
and netdev parts of mlx5 driver. Move that struct to mlx5_ib namespace,
clean vertical space alignment and convert lib_uar_4k from bool to
bitfield.
Link: https://lore.kernel.org/r/20200324060143.1569116-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend QP creation to get uar page index from user space, this mode can be
used with the UAR dynamic mode APIs to allocate/destroy a UAR object.
As part of enabling this option blocked the weird/un-supported cross
channel option which uses index 0 hard-coded.
This QP flag wasn't exposed to user space as part of any formal upstream
release, the dynamic option can allow having valid UAR page index instead.
Link: https://lore.kernel.org/r/20200324060143.1569116-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend CQ creation to get uar page index from user space, this mode can be
used with the UAR dynamic mode APIs to allocate/destroy a UAR object.
Link: https://lore.kernel.org/r/20200324060143.1569116-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose UAR object and its alloc/destroy commands to be used over the ioctl
interface by user space applications.
This API supports both BF & NC modes and enables a dynamic allocation of
UARs once really needed.
As the number of driver objects were limited by the core ones when the
merged tree is prepared, had to decrease the number of core objects to
enable the new UAR object usage.
Link: https://lore.kernel.org/r/20200324060143.1569116-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It has been discovered that this feature can globally block the RX port,
so it should be allowed for highly privileged users only.
Fixes: 03404e8ae652("IB/mlx5: Add support to dropless RQ")
Link: https://lore.kernel.org/r/20200322124906.1173790-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have direct and reliable detection of WC support by the
system, use is broadly. The only case we have to worry about is when the
WC autodetector cannot run.
For this fringe case generally assume that that WC is available, except in
the well defined case of no PAT support on x86 which is tested by calling
arch_can_pci_mmap_wc().
If WC is wrongly assumed to be available then it causes a small
performance hit on paths in userspace that are tuned to the assumption
that WC is available. There is no functional loss.
It is very unlikely that any platforms exist that lack WC and also care
about the micro optimization of WC in the fringe case where autodetection
does not work.
By removing the fairly bogus CONFIG tests this makes WC work broadly on
all arches and all platforms.
Link: https://lore.kernel.org/r/20200318100323.46659-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The kzalloc() function returns NULL, not error pointers.
Fixes: 30f2fe40c7 ("IB/mlx5: Introduce UAPIs to manage packet pacing")
Link: https://lore.kernel.org/r/20200320132641.GF95012@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky says:
====================
This series fixes various corner cases in the mlx5_ib MR cache
implementation, see specific commit messages for more information.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_mr-cache':
RDMA/mlx5: Allow MRs to be created in the cache synchronously
RDMA/mlx5: Revise how the hysteresis scheme works for cache filling
RDMA/mlx5: Fix locking in MR cache work queue
RDMA/mlx5: Lock access to ent->available_mrs/limit when doing queue_work
RDMA/mlx5: Fix MR cache size and limit debugfs
RDMA/mlx5: Always remove MRs from the cache before destroying them
RDMA/mlx5: Simplify how the MR cache bucket is located
RDMA/mlx5: Rename the tracking variables for the MR cache
RDMA/mlx5: Replace spinlock protected write with atomic var
{IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib
{IB,net}/mlx5: Assign mkey variant in mlx5_ib only
{IB,net}/mlx5: Setup mkey variant before mr create command invocation
If the cache is completely out of MRs, and we are running in cache mode,
then directly, and synchronously, create an MR that is compatible with the
cache bucket using a sleeping mailbox command. This ensures that the
thread that is waiting for the MR absolutely will get one.
When a MR allocated in this way becomes freed then it is compatible with
the cache bucket and will be recycled back into it.
Deletes the very buggy ent->compl scheme to create a synchronous MR
allocation.
Link: https://lore.kernel.org/r/20200310082238.239865-13-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently if the work queue is running then it is in 'hysteresis' mode and
will fill until the cache reaches the high water mark. This implicit state
is very tricky and doesn't interact with pending very well.
Instead of self re-scheduling the work queue after the add_keys() has
started to create the new MR, have the queue scheduled from
reg_mr_callback() only after the requested MR has been added.
This avoids the bad design of an in-rush of queue'd work doing back to
back add_keys() until EAGAIN then sleeping. The add_keys() will be paced
one at a time as they complete, slowly filling up the cache.
Also, fix pending to be only manipulated under lock.
Link: https://lore.kernel.org/r/20200310082238.239865-12-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All of the members of mlx5_cache_ent must be accessed while holding the
spinlock, add the missing spinlock in the __cache_work_func().
Using cache->stopped and flush_workqueue() is an inherently racy way to
shutdown self-scheduling work on a queue. Replace it with ent->disabled
under lock, and always check disabled before queuing any new work. Use
cancel_work_sync() to shutdown the queue.
Use READ_ONCE/WRITE_ONCE for dev->last_add to manage concurrency as
coherency is less important here.
Split fill_delay from the bitfield. C bitfield updates are not atomic and
this is just a mess. Use READ_ONCE/WRITE_ONCE, but this could also use
test_bit()/set_bit().
Link: https://lore.kernel.org/r/20200310082238.239865-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Accesses to these members needs to be locked. There is no reason not to
hold a spinlock while calling queue_work(), so move the tests into a
helper and always call it under lock.
The helper should be called when available_mrs is adjusted.
Link: https://lore.kernel.org/r/20200310082238.239865-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The size_write function is supposed to adjust the total_mr's to match the
user's request, but lacks locking and safety checking.
total_mrs can only be adjusted by at most available_mrs. mrs already
assigned to users cannot be revoked. Ensure that the user provides a
target value within the range of available_mrs and within the high/low
water mark.
limit_write has confusing and wrong sanity checking, and doesn't have the
ability to deallocate on limit reduction.
Since both functions use the same algorithm to adjust the available_mrs,
consolidate it into one function and write it correctly. Fix the locking
and by holding the spinlock for all accesses to ent->X.
Always fail if the user provides a malformed string.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200310082238.239865-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The cache bucket tracks the total number of MRs that exists, both inside
and outside of the cache. Removing a MR from the cache (by setting
cache_ent to NULL) without updating total_mrs will cause the tracking to
leak and be inflated.
Further fix the rereg_mr path to always destroy the MR. reg_create will
always overwrite all the MR data in mlx5_ib_mr, so the MR must be
completely destroyed, in all cases, before this function can be
called. Detach the MR from the cache and unconditionally destroy it to
avoid leaking HW mkeys.
Fixes: afd1417404 ("IB/mlx5: Use direct mkey destroy command upon UMR unreg failure")
Fixes: 56e11d628c ("IB/mlx5: Added support for re-registration of MRs")
Link: https://lore.kernel.org/r/20200310082238.239865-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are many bad APIs here that are accepting a cache bucket index
instead of a bucket pointer. Many of the callers already have a bucket
pointer, so this results in a lot of confusing uses of order2idx().
Pass the struct mlx5_cache_ent into add_keys(), remove_keys(), and
alloc_cached_mr().
Once the MR is in the cache, store the cache bucket pointer directly in
the MR, replacing the 'bool allocated_from cache'.
In the end there is only one place that needs to form index from order,
alloc_mr_from_cache(). Increase the safety of this function by disallowing
it from accessing cache entries in the ODP special area.
Link: https://lore.kernel.org/r/20200310082238.239865-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mkey variant calculation was spinlock protected to make it atomic, replace
that with one atomic variable.
Link: https://lore.kernel.org/r/20200310082238.239865-4-leon@kernel.org
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As mlx5_ib is the only user of the mlx5_core_create_mkey_cb, move the
logic inside mlx5_ib and cleanup the code in mlx5_core.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
mkey variant is not required for mlx5_core use, move the mkey variant
counter to mlx5_ib.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
On reg_mr_callback() mlx5_ib is recalculating the mkey variant which is
wrong and will lead to using a different key variant than the one
submitted to firmware on create mkey command invocation.
To fix this, we store the mkey variant before invoking the firmware
command and use it later on completion (reg_mr_callback).
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Until now the flex parser capability was used in ib_query_device() to
indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp.
Newer devices and firmware will have configurations with the flexparser
but without mpls support.
Testing for the flex parser capability was a mistake, the tunnel_stateless
capability was intended for detecting mpls and was introduced at the same
time as the flex parser capability.
Otherwise userspace will be incorrectly informed that a future device
supports MPLS when it does not.
Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.17
Fixes: e818e255a5 ("IB/mlx5: Expose MPLS related tunneling offloads")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Those macros are already defined in include/linux/mlx5/driver.h, so delete
their duplicate variants.
Link: https://lore.kernel.org/r/20200310075706.238592-1-leon@kernel.org
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc5' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas Says:
====================
Expose raw packet pacing APIs to be used by DEVX based applications. The
existing code was refactored to have a single flow with the new raw APIs.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_packet_pacing':
IB/mlx5: Introduce UAPIs to manage packet pacing
net/mlx5: Expose raw packet pacing APIs
Introduce packet pacing uobject and its alloc and destroy
methods.
This uobject holds mlx5 packet pacing context according to the device
specification and enables managing packet pacing device entries that are
needed by DEVX applications.
Link: https://lore.kernel.org/r/20200219190518.200912-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Cited commit missed to include low level congestion control related
debugfs stage initialization. This resulted in missing debugfs entries
for cc_params of a RDMA device.
Add them back.
Fixes: b5ca15ad7e ("IB/mlx5: Add proper representors support")
Link: https://lore.kernel.org/r/20200227125407.99803-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add two debugfs parameters described below.
np_min_time_between_cnps - Minimum time between sending CNPs from the
port.
Unit = microseconds.
Default = 0 (no min wait time; generated
based on incoming ECN marked packets).
rp_max_rate - Maximum rate at which reaction point node can transmit.
Once this limit is reached, RP is no longer rate limited.
Unit = Mbits/sec
Default = 0 (full speed)
Link: https://lore.kernel.org/r/20200227125246.99472-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following race may occur because of the call_srcu and the placement of
the synchronize_srcu vs the xa_erase.
CPU0 CPU1
mlx5_ib_free_implicit_mr: destroy_unused_implicit_child_mr:
xa_erase(odp_mkeys)
synchronize_srcu()
xa_lock(implicit_children)
if (still in xarray)
atomic_inc()
call_srcu()
xa_unlock(implicit_children)
xa_erase(implicit_children):
xa_lock(implicit_children)
__xa_erase()
xa_unlock(implicit_children)
flush_workqueue()
[..]
free_implicit_child_mr_rcu:
(via call_srcu)
queue_work()
WARN_ON(atomic_read())
[..]
free_implicit_child_mr_work:
(via wq)
free_implicit_child_mr()
mlx5_mr_cache_invalidate()
mlx5_ib_update_xlt() <-- UMR QP fail
atomic_dec()
The wait_event() solves the race because it blocks until
free_implicit_child_mr_work() completes.
Fixes: 5256edcb98 ("RDMA/mlx5: Rework implicit ODP destroy")
Link: https://lore.kernel.org/r/20200227113918.94432-1-leon@kernel.org
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit f164be8c03 ("IB/mlx5: Extend caps stage to handle VAR
capabilities") introduced a straight "/" division of the u64 variable
"bar_size".
This was fixed with commit 685eff5131 ("IB/mlx5: Use div64_u64 for
num_var_hw_entries calculation"). However, div64_u64() is redundant here
as mlx5_var_table::stride_size is of type u32. Make the actual code way
more optimized on 32-bit kernels using div_u64() and fix 80 chars
break-through by the way.
Fixes: 685eff5131 ("IB/mlx5: Use div64_u64 for num_var_hw_entries calculation")
Link: https://lore.kernel.org/r/20200217073629.8051-1-alobakin@dlink.ru
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5cOX8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGw0AH/0nex1uEpzUTm+Gw
D8QPFr3y61sYLu7sIMVt39+Zl6OSxvOOX14QIM/mrNrzjjRI8EXGvYgES5gSO4on
6NLS6/64c1oQThDHCsxusKoSWLZ9KqP2vRPt7tZjn7DZMzEsuLhlINKBeupcqALX
FnOBr768P+if/j0WcDR2pBaMg3ch+XC5sfYav7kapjgWUqCx9BvrHKLXXdlEGUC0
7Ku7PH+nF7CIHiTay+i89odvOd8aLGsa/SUf5XGauKkH65VgQkmksgPeZUPqTnyC
MEsyLJLfn4AP3ySwqzfSLac8jqZG8FGBt4DgM2MQBHibctzfeMIznfcfh/A8+Edx
jqLKLAs=
=4075
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc4' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The proper return code is "-EOPNOTSUPP" when the requested QP type is
not supported by the provider.
Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Relaxed ordering is not supported in UMR so we are disabling UMR usage
when user passes relaxed ordering access flag.
Enable using UMR when user requested relaxed ordering but there are no
relaxed ordering capabilities.
This will prevent user from unnecessarily registering a new mkey.
Fixes: d6de0bb185 ("RDMA/mlx5: Set relaxed ordering when requested")
Link: https://lore.kernel.org/r/20200227113834.94233-1-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Multi chain support requires the miss path to continue the processing
from the last chain id, and for that we need to save the chain
miss tag (a mapping for 32bit chain id) on reg_c0 which will
come in a next patch.
Currently reg_c0 is exclusively used to store the source port
metadata, giving it 32bit, it is created from 16bits of vcha_id,
and 16bits of vport number.
We will move this source port metadata to upper 16bits, and leave the
lower bits for the chain miss tag. We compress the reg_c0 source port
metadata to 16bits by taking 8 bits from vhca_id, and 8bits from
the vport number.
Since we compress the vport number to 8bits statically, and leave two
top ids for special PF/ECPF numbers, we will only support a max of 254
vports with this strategy.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The cmd and index variables declared as u16 and the result is supposed to
be stored in u64. The C arithmetic rules doesn't promote "(index >> 8) <<
16" to be u64 and leaves the end result to be u16.
Fixes: 7be76bef32 ("IB/mlx5: Introduce VAR object and its alloc/destroy methods")
Link: https://lore.kernel.org/r/20200212072635.682689-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As in the prior patch, the devx code is not fully cleaning up its
event_lists before finishing driver_destroy allowing a later read to
trigger user after free conditions.
Re-arrange things so that the event_list is always empty after destroy and
ensure it remains empty until the file is closed.
Fixes: f7c8416cce ("RDMA/core: Simplify destruction of FD uobjects")
Link: https://lore.kernel.org/r/20200212072635.682689-7-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When binding a QP with a counter and the QP state is not RESET, return
failure if the rts2rts_qp_counters_set_id is not supported by the
device.
This is to prevent cases like manual bind for Connect-IB devices from
returning success when the feature is not supported.
Fixes: d14133dd41 ("IB/mlx5: Support set qp counter")
Link: https://lore.kernel.org/r/20200126171708.5167-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Driver updates and cleanup for qedr, bnxt_re, hns, siw, mlx5, mlx4, rxe,
i40iw
- Larger series doing cleanup and rework for hns and hfi1.
- Some general reworking of the CM code to make it a little more
understandable
- Unify the different code paths connected to the uverbs FD scheme
- New UAPI ioctls conversions for get context and get async fd
- Trace points for CQ and CM portions of the RDMA stack
- mlx5 driver support for virtio-net formatted rings as RDMA raw ethernet QPs
- verbs support for setting the PCI-E relaxed ordering bit on DMA traffic
connected to a MR
- A couple of bug fixes that came too late to make rc7
-----BEGIN PGP SIGNATURE-----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=hepK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A very quiet cycle with few notable changes. Mostly the usual list of
one or two patches to drivers changing something that isn't quite rc
worthy. The subsystem seems to be seeing a larger number of rework and
cleanup style patches right now, I feel that several vendors are
prepping their drivers for new silicon.
Summary:
- Driver updates and cleanup for qedr, bnxt_re, hns, siw, mlx5, mlx4,
rxe, i40iw
- Larger series doing cleanup and rework for hns and hfi1.
- Some general reworking of the CM code to make it a little more
understandable
- Unify the different code paths connected to the uverbs FD scheme
- New UAPI ioctls conversions for get context and get async fd
- Trace points for CQ and CM portions of the RDMA stack
- mlx5 driver support for virtio-net formatted rings as RDMA raw
ethernet QPs
- verbs support for setting the PCI-E relaxed ordering bit on DMA
traffic connected to a MR
- A couple of bug fixes that came too late to make rc7"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (108 commits)
RDMA/core: Make the entire API tree static
RDMA/efa: Mask access flags with the correct optional range
RDMA/cma: Fix unbalanced cm_id reference count during address resolve
RDMA/umem: Fix ib_umem_find_best_pgsz()
IB/mlx4: Fix leak in id_map_find_del
IB/opa_vnic: Spelling correction of 'erorr' to 'error'
IB/hfi1: Fix logical condition in msix_request_irq
RDMA/cm: Remove CM message structs
RDMA/cm: Use IBA functions for complex structure members
RDMA/cm: Use IBA functions for simple structure members
RDMA/cm: Use IBA functions for swapping get/set acessors
RDMA/cm: Use IBA functions for simple get/set acessors
RDMA/cm: Add SET/GET implementations to hide IBA wire format
RDMA/cm: Add accessors for CM_REQ transport_type
IB/mlx5: Return the administrative GUID if exists
RDMA/core: Ensure that rdma_user_mmap_entry_remove() is a fence
IB/mlx4: Fix memory leak in add_gid error flow
IB/mlx5: Expose RoCE accelerator counters
RDMA/mlx5: Set relaxed ordering when requested
RDMA/core: Add the core support field to METHOD_GET_CONTEXT
...
Compilation of mlx5 driver without CONFIG_INFINIBAND_USER_ACCESS generates
the following error.
on x86_64:
ld: drivers/infiniband/hw/mlx5/main.o: in function `mlx5_ib_handler_MLX5_IB_METHOD_VAR_OBJ_ALLOC':
main.c:(.text+0x186d): undefined reference to `ib_uverbs_get_ucontext_file'
ld: drivers/infiniband/hw/mlx5/main.o:(.rodata+0x2480): undefined reference to `uverbs_idr_class'
ld: drivers/infiniband/hw/mlx5/main.o:(.rodata+0x24d8): undefined reference to `uverbs_destroy_def_handler'
This is happening because some parts of the UAPI description are not
static. This is a hold over from earlier code that relied on struct
pointers to refer to object types, now object types are referenced by
number. Remove the unused globals and add statics to the remaining UAPI
description elements.
Remove the redundent #ifdefs around mlx5_ib_*defs and obsolete
mlx5_ib_get_devx_tree().
The compiler now trims alot more unused code, including the above
problematic definitions when !CONFIG_INFINIBAND_USER_ACCESS.
Fixes: 7be76bef32 ("IB/mlx5: Introduce VAR object and its alloc/destroy methods")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
A user can change the operational GUID (a.k.a affective GUID) through
link/infiniband. Therefore it is preferred to return the currently set
GUID if it exists instead of the operational.
This way the PF can query which VF GUID will be set in the next bind. In
order to align with MAC address, zero is returned if administrative GUID
is not set.
For example, before setting administrative GUID:
$ ip link show
ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256
link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 00:00:00:00:00:00:00:00, PORT_GUID 00:00:00:00:00:00:00:00, link-state auto, trust off, query_rss off
Then:
$ ip link set ib0 vf 0 node_guid 11:00:af:21:cb:05:11:00
$ ip link set ib0 vf 0 port_guid 22:11:af:21:cb:05:11:00
After setting administrative GUID:
$ ip link show
ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256
link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 11:00:af:21:cb:05:11:00, PORT_GUID 22:11:af:21:cb:05:11:00, link-state auto, trust off, query_rss off
Fixes: 9c0015ef09 ("IB/mlx5: Implement callbacks for getting VFs GUID attributes")
Link: https://lore.kernel.org/r/20200116120048.12744-1-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCXiVO8AAKCRAp8NhrnBAZ
scTrAP9gb0d3qv0IOtHw5aGI1DAgjTUn/SzUOnsjDEn7DIoh9gEA2+ZmaEyLXKrl
+UcZb31auy5P8ueJYokRLhLAyRcOIAg=
=yaHb
-----END PGP SIGNATURE-----
Merge tag 'rds-odp-for-5.5' into rdma.git for-next
From https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma
Leon Romanovsky says:
====================
Use ODP MRs for kernel ULPs
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
====================
* tag 'rds-odp-for-5.5':
net/rds: Use prefetch for On-Demand-Paging MR
net/rds: Handle ODP mr registration/unregistration
net/rds: Detect need of On-Demand-Paging memory registration
RDMA/mlx5: Fix handling of IOVA != user_va in ODP paths
IB/mlx5: Mask out unsupported ODP capabilities for kernel QPs
RDMA/mlx5: Don't fake udata for kernel path
IB/mlx5: Add ODP WQE handlers for kernel QPs
IB/core: Add interface to advise_mr for kernel users
IB/core: Introduce ib_reg_user_mr
IB: Allow calls to ib_umem_get from kernel ULPs
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCXiVO8AAKCRAp8NhrnBAZ
scTrAP9gb0d3qv0IOtHw5aGI1DAgjTUn/SzUOnsjDEn7DIoh9gEA2+ZmaEyLXKrl
+UcZb31auy5P8ueJYokRLhLAyRcOIAg=
=yaHb
-----END PGP SIGNATURE-----
Merge tag 'rds-odp-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma
Leon Romanovsky says:
====================
Use ODP MRs for kernel ULPs
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This merge syncs with mlx5-next latest HW bits and layout updates for next
features, in addition one patch that improves
mlx5_create_auto_grouped_flow_table() API across all mlx5 users.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Refactor mlx5_create_auto_grouped_flow_table
net/mlx5e: Add discard counters per priority
net/mlx5e: Expose FEC feilds and related capability bit
net/mlx5: Add mlx5_ifc definitions for connection tracking support
net/mlx5: Add copy header action struct layout
net/mlx5: Expose resource dump register mapping
net/mlx5: Add structures and defines for MIRC register
net/mlx5: Read MCAM register groups 1 and 2
net/mlx5: Add structures layout for new MCAM access reg groups
net/mlx5: Expose vDPA emulation device capabilities
net/mlx5: Add Virtio Emulation related device capabilities
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Refactor mlx5_create_auto_grouped_flow_table() to use ft_attr param
which already carries the max_fte, prio and flags memebers, and is
used the same in similar mlx5_create_flow_table() function.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Introduce the following RoCE accelerator counters:
* roce_adp_retrans - number of adaptive retransmission for RoCE traffic.
* roce_adp_retrans_to - number of times RoCE traffic reached time out
due to adaptive retransmission.
* roce_slow_restart - number of times RoCE slow restart was used.
* roce_slow_restart_cnps - number of times RoCE slow restart
generate CNP packets.
* roce_slow_restart_trans - number of times RoCE slow restart change
state to slow restart.
Link: https://lore.kernel.org/r/20200115145459.83280-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable relaxed ordering in the mkey context when requested. As relaxed
ordering is not currently supported in UMR, disable UMR usage for relaxed
ordering MRs.
Link: https://lore.kernel.org/r/1578506740-22188-11-git-send-email-yishaih@mellanox.com
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Till recently it was not possible for userspace to specify a different
IOVA, but with the new ibv_reg_mr_iova() library call this can be done.
To compute the user_va we must compute:
user_va = (iova - iova_start) + user_va_start
while being cautious of overflow and other math problems.
The iova is not reliably stored in the mmkey when the MR is created. Only
the cached creation path (the common one) set it, so it must also be set
when creating uncached MRs.
Fix the weird use of iova when computing the starting page index in the
MR. In the normal case, when iova == umem.address:
iova & (~(BIT(page_shift) - 1)) ==
ALIGN_DOWN(umem.address, odp->page_size) ==
ib_umem_start(odp)
And when iova is different using it in math with a user_va is wrong.
Finally, do not allow an implicit ODP to be created with a non-zero IOVA
as we have no support for that.
Fixes: 7bdf65d411 ("IB/mlx5: Handle page faults")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The ODP handler for WQEs in RQ or SRQ is not implented for kernel QPs.
Therefore don't report support in these if query comes from a kernel user.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
