Since our pre_crtc_configure hook returned void, we didn't implement a
goto-based error path handling, leading to errors like failing to put
back the device in pm_runtime in all the error paths, but also failing
to disable the pixel clock if clk_set_min_rate on the HSM clock fails.
Move to a goto-based implementation to have an easier consitency.
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-4-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
In the bind hook, we actually need the device to have the HSM clock
running during the final part of the display initialisation where we
reset the controller and initialise the CEC component.
Failing to do so will result in a complete, silent, hang of the CPU.
Fixes: 411efa18e4 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-3-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-6-maxime@cerno.tech
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.
Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.
Since we also want to change the HSM clock rate and it's only valid
while the clock is disabled, we need to move the clk_set_min_rate() call
on the HSM clock above pm_runtime_get_and_sync().
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-5-maxime@cerno.tech
Link: https://lore.kernel.org/linux-arm-kernel/20210924152334.1342630-1-maxime@cerno.tech/
When the firmware doesn't setup the HSM rate (such as when booting
without an HDMI cable plugged in), its rate is 0 and thus any register
access results in a CPU stall, even though HSM is enabled.
Let's enforce a minimum rate at boot to avoid this issue.
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-4-maxime@cerno.tech
In order to better track where in the kernel the dma-buf code is used,
put the symbols in the namespace DMA_BUF and modify all users of the
symbols to properly import the namespace to not break the build at the
same time.
Now the output of modinfo shows the use of these symbols, making it
easier to watch for users over time:
$ modinfo drivers/misc/fastrpc.ko | grep import
import_ns: DMA_BUF
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20211010124628.17691-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Makes the handling a bit more complex, but avoids the use of
dma_resv_get_excl_unlocked().
v2: improve coding and documentation
v3: adjust the TODO comment as suggested by Daniel
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-25-christian.koenig@amd.com
We know the upper bound on # of mixers (ie. two), so lets just allocate
this on the stack.
Fixes:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:201
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
INFO: lockdep is turned off.
irq event stamp: 43642
hardirqs last enabled at (43641): [<ffffffe24dd276bc>] cpuidle_enter_state+0x158/0x25c
hardirqs last disabled at (43642): [<ffffffe24dfff450>] enter_el1_irq_or_nmi+0x10/0x1c
softirqs last enabled at (43620): [<ffffffe24d4103fc>] __do_softirq+0x1e4/0x464
softirqs last disabled at (43615): [<ffffffe24d48bd90>] __irq_exit_rcu+0x104/0x150
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.0-rc3-debug+ #105
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Call trace:
dump_backtrace+0x0/0x18c
show_stack+0x24/0x30
dump_stack_lvl+0xa0/0xd4
dump_stack+0x18/0x34
___might_sleep+0x1e0/0x1f0
__might_sleep+0x78/0x8c
slab_pre_alloc_hook.constprop.0+0x48/0x6c
__kmalloc+0xc8/0x21c
dpu_crtc_vblank_callback+0x158/0x1f8
dpu_encoder_vblank_callback+0x70/0xc4
dpu_encoder_phys_vid_vblank_irq+0x50/0x12c
dpu_core_irq+0x1bc/0x1d0
dpu_irq+0x1c/0x28
msm_irq+0x34/0x40
__handle_irq_event_percpu+0x15c/0x308
handle_irq_event_percpu+0x3c/0x90
handle_irq_event+0x54/0x98
handle_level_irq+0xa0/0xd0
handle_irq_desc+0x2c/0x44
generic_handle_domain_irq+0x28/0x34
dpu_mdss_irq+0x90/0xe8
handle_irq_desc+0x2c/0x44
handle_domain_irq+0x54/0x80
gic_handle_irq+0xd4/0x148
call_on_irq_stack+0x2c/0x54
do_interrupt_handler+0x4c/0x64
el1_interrupt+0x30/0xd0
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x78/0x7c
arch_local_irq_enable+0xc/0x14
cpuidle_enter+0x44/0x5c
do_idle+0x248/0x268
cpu_startup_entry+0x30/0x48
rest_init+0x188/0x19c
arch_call_rest_init+0x1c/0x28
start_kernel+0x704/0x744
__primary_switched+0xc0/0xc8
Fixes: 78d9b458cc ("drm/msm/dpu: Add CRC support for DPU")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211023160016.3322052-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Update live.evict to wait on last request and idle GPU after each loop.
This not only enhances the test to fill the GGTT on each engine class
but also avoid timeouts from igt_flush_test when using GuC submission.
igt_flush_test (idle GPU) can take a long time with GuC submission if
losts of contexts are created due to H2G / G2H required to destroy
contexts.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021214040.33292-1-matthew.brost@intel.com
perf_parallel_engines is micro benchmark to test i915 request
scheduling. The test creates a thread per physical engine and submits
NOP requests and waits the requests to complete in a loop. In execlists
mode this works perfectly fine as powerful CPU has enough cores to feed
each engine and process the CSBs. With GuC submission the uC gets
overwhelmed as all threads feed into a single CTB channel and the GuC
gets bombarded with CSBs as contexts are immediately switched in and out
on the engines due to the zero runtime of the requests. When the GuC is
overwhelmed scheduling of contexts is unfair due to the nature of the
GuC scheduling algorithm. This behavior is understood and deemed
acceptable as this micro benchmark isn't close to real world use case.
Increasing the timeout of wait period for requests to complete. This
makes the test understand that is ok for contexts to get starved in this
scenario.
A future patch / cleanup may just delete these micro benchmark tests as
they basically mean nothing. We care about real workloads not made up
ones.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011175704.28509-1-matthew.brost@intel.com
DRM core uses the GEM base object to access GEM functionality. It does
not depend on individual implementations. Move the code into modules.
Also move the CMA framebuffer helpers into the CMA's module, as they're
not usable without CMA.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020131941.15367-4-tzimmermann@suse.de
This reverts commits ddab8bd788 ("drm/amd/display: Fix two cursor duplication
when using overlay") and e7d9560aea ("Revert "drm/amd/display: Fix overlay
validation by considering cursors"").
tl;dr ChromeOS uses the atomic interface for everything except the cursor. This
is incorrect and forces amdgpu to disable some hardware features. Let's revert
the ChromeOS-specific workaround in mainline and allow the Chrome team to keep
it internally in their own tree.
See [1] for more details. This patch is an alternative to [2], which added
ChromeOS detection.
[1]: https://lore.kernel.org/amd-gfx/JIQ_93_cHcshiIDsrMU1huBzx9P9LVQxucx8hQArpQu7Wk5DrCl_vTXj_Q20m_L-8C8A5dSpNcSJ8ehfcCrsQpfB5QG_Spn14EYkH9chtg0=@emersion.fr/
[2]: https://lore.kernel.org/amd-gfx/20211011151609.452132-1-contact@emersion.fr/
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: ddab8bd788 ("drm/amd/display: Fix two cursor duplication when using overlay")
Fixes: e7d9560aea ("Revert "drm/amd/display: Fix overlay validation by considering cursors"")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On arcturus, not all platforms use PMFW based fan control. On such
ASICs fan control by PMFW will be disabled in PPTable. Disable hwmon
knobs for fan control also as it is not possible to report or control
fan speed on such platforms through driver.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The extended bits were not available for use on vega20 and
presumably arcturus as well.
Fixes: a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12")
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing check in smu_v11_0_init_display_count(),
Fixes: af3b89d3a6 ("drm/amdgpu/smu11.0: convert to IP version checking")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should let us do an accelerated copy directly to the shmem pages
when temporarily moving lmem-only objects, where the i915-gem shrinker
can later kick in to swap out the pages, if needed.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-7-matthew.auld@intel.com
We currently just evict lmem objects to system memory when under memory
pressure. For this case we might lack the usual object mm.pages, which
effectively hides the pages from the i915-gem shrinker, until we
actually "attach" the TT to the object, or in the case of lmem-only
objects it just gets migrated back to lmem when touched again.
For all cases we can just adjust the i915 shrinker LRU each time we also
adjust the TTM LRU. The two cases we care about are:
1) When something is moved by TTM, including when initially populating
an object. Importantly this covers the case where TTM moves something from
lmem <-> smem, outside of the normal get_pages() interface, which
should still ensure the shmem pages underneath are reclaimable.
2) When calling into i915_gem_object_unlock(). The unlock should
ensure the object is removed from the shinker LRU, if it was indeed
swapped out, or just purged, when the shrinker drops the object lock.
v2(Thomas):
- Handle managing the shrinker LRU in adjust_lru, where it is always
safe to touch the object.
v3(Thomas):
- Pretty much a re-write. This time piggy back off the shrink_pin
stuff, which actually seems to fit quite well for what we want here.
v4(Thomas):
- Just use a simple boolean for tracking ttm_shrinkable.
v5:
- Ensure we call adjust_lru when faulting the object, to ensure the
pages are visible to the shrinker, if needed.
- Add back the adjust_lru when in i915_ttm_move (Thomas)
v6(Reported-by: kernel test robot <lkp@intel.com>):
- Remove unused i915_tt
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #v4
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-6-matthew.auld@intel.com
Attempt to document shrink_pin and the other relevant interfaces that
interact with it, before we start messing with it.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-5-matthew.auld@intel.com
The comment here is no longer accurate, since the current shrinker code
requires a full ref before touching any objects. Also unset_pages()
should already do the required make_unshrinkable() for us, if needed,
which is also nicely balanced with set_pages().
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-4-matthew.auld@intel.com
For cached objects we can allocate our pages directly in shmem. This
should make it possible(in a later patch) to utilise the existing
i915-gem shrinker code for such objects. For now this is still disabled.
v2(Thomas):
- Add optional try_to_writeback hook for objects. Importantly we need
to check if the object is even still shrinkable; in between us
dropping the shrinker LRU lock and acquiring the object lock it could for
example have been moved. Also we need to differentiate between
"lazy" shrinking and the immediate writeback mode. Also later we need to
handle objects which don't even have mm.pages, so bundling this into
put_pages() would require somehow handling that edge case, hence
just letting the ttm backend handle everything in try_to_writeback
doesn't seem too bad.
v3(Thomas):
- Likely a bad idea to touch the object from the unpopulate hook,
since it's not possible to hold a reference, without also creating
circular dependency, so likely this is too fragile. For now just
ensure we at least mark the pages as dirty/accessed when called from the
shrinker on WILLNEED objects.
- s/try_to_writeback/shrinker_release_pages, since this can do more
than just writeback.
- Get rid of do_backup boolean and just set the SWAPPED flag prior to
calling unpopulate.
- Keep shmem_tt as lowest priority for the TTM LRU bo_swapout walk, since
these just get skipped anyway. We can try to come up with something
better later.
v4(Thomas):
- s/PCI_DMA/DMA/. Also drop NO_KERNEL_MAPPING and NO_WARN, which
apparently doesn't do anything with streaming mappings.
- Just pass along the error for ->truncate, and assume nothing.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-2-matthew.auld@intel.com
Break out some shmem backend utils for future reuse by the TTM backend:
shmem_alloc_st(), shmem_free_st() and __shmem_writeback() which we can
use to provide a shmem-backed TTM page pool for cached-only TTM
buffer objects.
Main functional change here is that we now compute the page sizes using
the dma segments rather than using the physical page address segments.
v2(Reported-by: kernel test robot <lkp@intel.com>)
- Make sure we initialise the mapping on the error path in
shmem_get_pages()
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-1-matthew.auld@intel.com
I forgot to do this properly in
commit 6f11f37459
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jul 23 10:34:55 2021 +0200
drm/plane: remove drm_helper_get_plane_damage_clips
intel-gfx CI didn't spot this because we run each selftest in each own
invocations, which means reloading i915.ko. But if you just run all
the selftests in one go at boot-up, then it falls apart and eventually
we cross over the hardcoded limited of how many properties can be
attached to a single object.
Fix this by resetting the property count. Nothing else to clean up
since it's all static storage anyway.
Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 6f11f37459 ("drm/plane: remove drm_helper_get_plane_damage_clips")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021202048.2638668-1-daniel.vetter@ffwll.ch
wbinvd_on_all_cpus() is only defined on x86 it seems, plus we need to
include asm/smp.h here.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021125332.2455288-1-matthew.auld@intel.com
We left the definition IS_CANNONLAKE() macro while removing it from the
tree due to having to merge the changes in different branches. Now that
everything is back in sync and nobody is using IS_CANNONLAKE(), we can
safely ditch it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021181847.1543341-1-lucas.demarchi@intel.com
Check if VCN instances are harvested when controlling
VCN power gating and setting up VCN clocks.
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some navy flounder boards do not properly mark harvested
VCN instances. Fix that here.
v2: use IP versions
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use the id variable, just use the constant
plus instance offset directly.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use the tmp variable, just use the constant
directly.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roughly the same code was present in all VCN versions.
Consolidate it into a single function.
v2: use AMDGPU_UCODE_ID_VCN + i, check if num_inst >= 2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Only enable firmware for the instance that is enabled.
v2: use AMDGPU_UCODE_ID_VCN + i
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all migrate.cpages returned from migrate_vma_setup can be migrated,
for example non anonymous page, or out of device memory. So after
migrate_vma_pages returns, add debug message to count pages are
successfully migrated which has MIGRATE_PFN_VALID and
MIGRATE_PFN_MIGRATE flag set.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cpages is only updated by migrate_vma_setup. So capture its value at
that point to clarify the significance of the number. The next patch
will add counting of actually migrated pages after migrate_vma_pages for
debug purposes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP firmware will be responsible for applying the GRBM CAM remapping in
the production. And the GRBM_CAM_INDEX / GRBM_CAM_DATA registers will be
protected by PSP under security policy. So remove it according to the
new security policy.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable GPU metrics feature in one VF mode.
These are only possible in one VF mode because the VF is dedicated in that case.
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change byte_clk_rate, pixel_clk_rate, esc_clk_rate, and src_clk_rate
from u32 to unsigned long, since clk_get_rate() returns an unsigned long.
Fixes: a6bcddbc2e ("drm/msm: dsi: Handle dual-channel for 6G as well")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>
Link: https://lore.kernel.org/r/20211020183438.32263-1-jesszhan@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
UAPI Changes:
- Expose multi-LRC submission interface
Similar to the bonded submission interface but simplified.
Comes with GuC only implementation for now. See kerneldoc
for more details.
Userspace changes: https://github.com/intel/media-driver/pull/1252
- Expose logical engine instance to user
Needed by the multi-LRC submission interface for GuC
Userspace changes: https://github.com/intel/media-driver/pull/1252
Driver Changes:
- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)
- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)
- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
Reorganize the HDMI 4:2:0 handling a bit by introducing
intel_hdmi_output_format(). We already have the DP counterpart
and I want to unify the 4:2:0 handling across both a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename intel_hdmi_port_clock() into intel_hdmi_tmds_clock(), and
move the 4:2:0 TMDS clock halving into intel_hdmi_tmds_clock() so
the callers don't have to worry about such details.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Introduce a small helper which given the crtc state tells us
whether we're output YCbCr 4:2:0 or not. For native HDMI this
is rather simple as we just look at the output_format. But I
think the helper is beneficial since with DP HDMI DFPs we're
going to need a more complex variant, and I want to unify the
DP and HDMI sides of that as much as possible.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_hdmi_bpc_possible() is used by the DP code as well where
the native HDMI source limits do not apply. So let's split this
into a pair of functions: one for the source vs. one for the sink.
This is basically reverting some of commit 41828125ac ("drm/i915:
Move platform checks into intel_hdmi_bpc_possible()") slightly,
but in a nicer form. I guess I forgot at the time that the DP side
uses this too.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Instead of open-coding the checks add functions for this, simplifying
the handling of CCS modifiers on future platforms.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-12-imre.deak@intel.com
Move the function to intel_fb.c and rename it adding the intel_fb_
prefix following the naming of exported functions.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-11-imre.deak@intel.com
Future platforms change the location of CCS AUX planes in CCS
framebuffers, so add intel_fb_is_ccs_aux_plane() to query for these
planes independently of the platform. This function can be used
everywhere instead of is_ccs_plane() (or is_ccs_plane() && !cc_plane()),
since all the callers are only interested in CCS AUX planes (and not CCS
color-clear planes).
Add the corresponding intel_fb_is_gen12_ccs_aux_plane(), which can be
used everywhere instead of is_gen12_ccs_plane(), based on the above
explanation.
This change also unexports the is_gen12_ccs_modifier(),
is_gen12_ccs_plane(), is_gen12_ccs_cc_plane() functions as they are only
used in intel_fb.c
v1-v2: Unchanged
v3: (Ville)
- Use ccs_aux instead of the ccs_ctrl term everywhere.
- Use color_plane instead of plane term for FB plane indicies.
v4: Fix version range check. (Jani)
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-10-imre.deak@intel.com
CCS CC planes are quite different from CCS AUX planes, even though we
regard the CC planes as a linear buffer having a 64 byte stride. Thus
it's clearer to check for either CCS plane types explicitly when we need
to handle them; add the required CCS CC planes check here, while the
next patch will change all is_ccs_plane()/is_gen12_ccs_plane() checks to
consider only the CCS AUX planes.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-9-imre.deak@intel.com
On future platforms the index of the color-clear plane will change from
the one used by the GEN12 RC CCS CC modifier, so add a way to retrieve
the index independently of the platform/modifier.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-8-imre.deak@intel.com
Move intel_format_info_is_yuv_semiplanar() to intel_fb.c . The number of
planes for YUV semiplanar formats using CCS modifiers will change on
future platforms. We can use the modifier descriptors to simplify
getting the plane numbers for all modifiers, prepare for that here.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-7-imre.deak@intel.com
Checking the modifiers that support interlacing makes the condition
simpler and avoids us having to add new modifiers to the list (presuming
all/most of the new modifiers won't support interlacing).
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-5-imre.deak@intel.com
Add a tiling atttribute to the modifier descriptor, which let's us
get the tiling without listing the modifiers twice.
v1-v2: Unchanged.
v3:
- Initialize .tiling to I915_TILING_NONE explicitly (Ville)
- Move from previous patch lookup_modifier() to here, where it's first
used.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-4-imre.deak@intel.com
Move the function retrieving the format override information for a given
format/modifier to intel_fb.c. We can store a pointer to the format list
in each modifier's descriptor instead of the corresponding switch/case
logic, avoiding the listing of the modifiers twice.
v1: Unchanged.
v2: Handle invalid modifiers in intel_fb_get_format_info() passed from
userspace. (CI/igt_kms_addfb_basic/addfb25-bad-modifier)
v3: Move lookup_modifier() to the next patch, where it's first used.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-3-imre.deak@intel.com
Add a table describing all the framebuffer modifiers used by i915 at one
place. This has the benefit of deduplicating the listing of supported
modifiers for each platform and checking the support of these modifiers
on a given plane. This also simplifies in a similar way getting some
attribute for a modifier, for instance checking if the modifier is a
CCS modifier type.
While at it drop the cursor plane filtering from skl_plane_has_rc_ccs(),
as the cursor plane is registered with DRM core elsewhere.
v1: Unchanged.
v2:
- Keep the plane caps calculation in the plane code and pass an enum
with these caps to intel_fb_get_modifiers(). (Ville)
- Get the modifiers calling intel_fb_get_modifiers() in i9xx_plane.c as
well.
v3:
- s/.id/.modifier/ (Ville)
- Keep modifier_desc vs. plane_cap filter conditions consistent. (Ville)
- Drop redundant cursor plane check from skl_plane_has_rc_ccs(). (Ville)
- Use from, until display version fields in modifier_desc instead of a mask. (Jani)
- Unexport struct intel_modifier_desc, separate its decl and init. (Jani)
- Remove enum pipe, plane_id forward decls from intel_fb.h, which are
not needed after v2.
v4:
- Reuse IS_DISPLAY_VER() instead of open-coding it. (Jani)
- Preserve the current modifier order exposed to user space. (Ville)
v5: Use }, { on one line to seperate the descriptor array elements. (Jani)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> (v3)
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-2-imre.deak@intel.com
Add CRC support to DPU, which is currently not supported by
this driver. Only supports CRC for CRTC for now, but will extend support
to other blocks later on.
Changes in v2:
- Added kfree() calls for return paths in dpu_crtc_get_crc()
- Propogated error code for dpu_crtc_get_crc()
- Renamed skip_count
- Removed dpu_crtc_is_valid_crc_source()
- Removed wait for commit in dpu_crtc_set_crc_source()
- Moved crc_source from struct dpu_crtc to struct dpu_crtc_state
- Moved CRC register constants from dpu_hw_util.h to dpu_hw_lm.c
Validated with IGT kms_pipe_crc_basic, and kms_cursor_crc
Test: kms_pipe_crc_basic
Subtests Passed:
- bad-source
- read-crc-pipe-A
- read-crc-pipe-A-frame-sequence
- nonblocking-crc-pipe-A
- nonblocking-crc-pipe-A-frame-sequence
- disable-crc-after-crtc-pipe-A[1]
- compare-crc-sanitycheck-pipe-A[1]
Rest skipped
Test: kms_cursor_crc
Subtests Passed:
- pipe-A-cursor-size-change
- pipe-A-cursor-alpha-opaque
- pipe-A-cursor-alpha-transparent
Subtests Failed:
- pipe-A-cursor-dpms
- pipe-A-cursor-*-onscreen
- pipe-A-cursor-*-offscreen
Rest skipped
Tested on Qualcomm RB3 (debian, sdm845), Qualcomm RB5 (debian, qrb5165)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>
[1] Skipped on RB5 due to issue related to DPMS. Planning to upload a
fix for this in the future.
Link: https://lore.kernel.org/r/20211019224822.25940-1-jesszhan@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Switch to using bulk regulator API instead of hand coding loops.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211015001100.4193241-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective rockchip functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
[On rk3288 (pinky), rk3399 (gru-kevin, puma) and rk3328 (rock64)]
Tested-by: Heiko Stuebner <heiko@sntech.de>
[On RK3188/RK3066 (without iommu)]
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624095502.8945-1-tzimmermann@suse.de
This reverts commit 05734ca2a8.
It's not graceful, instead it leads to boot time warning splats in the
case it is supposed to handle gracefully. Apparently the BIOS/GOP
enabling the port we end up skipping leads to state readout
problems. Back to the drawing board.
References: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_21255/bat-adlp-4/boot0.txt
Fixes: 05734ca2a8 ("drm/i915/bios: gracefully disable dual eDP for now")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019114334.24643-1-jani.nikula@intel.com
On KMB, ADV bridge must be programmed and powered on prior to
MIPI DSI HW initialization.
v2: changed to atomic_bridge_chain_enable (Sam)
Fixes: 98521f4d4b ("drm/kmb: Mipi DSI part of the display driver")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Due to HW limitations, KMB cannot change height, width, or
pixel format after initial plane configuration.
v2: removed memset disp_cfg as it is already zero.
Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during
DSI initialization since this was causing MIPI Rx reset. Rest of the
writes are bitwise, so will not affect Mipi Rx side.
Fixes: 98521f4d4b ("drm/kmb: Mipi DSI part of the display driver")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
KMB only supports single resolution(1080p), this commit checks for
1920x1080x60 or 1920x1080x59 in crtc_mode_valid.
Also, modes with vfp < 4 are not supported in KMB display. This change
prunes display modes with vfp < 4.
v2: added vfp check
Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Use a different value for system clock offset in the
ppl/llp ratio calculations for clocks higher than 500 Mhz.
Fixes: 98521f4d4b ("drm/kmb: Mipi DSI part of the display driver")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This adjusts sync values according to the datasheet
Fixes: 1c243751c0 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel")
Co-developed-by: Marius Gripsgard <marius@ubports.com>
Signed-off-by: Dan Johansen <strit@manjaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The mxsfb->crtc.funcs may already be NULL when unloading the driver,
in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from
mxsfb_unload() leads to NULL pointer dereference.
Since all we care about is masking the IRQ and mxsfb->base is still
valid, just use that to clear and mask the IRQ.
Fixes: ae1ed00932 ("drm: mxsfb: Stop using DRM simple display pipeline helper")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Driver never uses virtual address of DRM CMA buffers. Switch to CMA
helpers which don't deal with virtual mapping.
This was actually already the case before commit ad408c766c
("drm/sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS for GEM operations"),
but only convenient macro at the time used helpers with virtual
mapping.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019181028.4190737-1-jernej.skrabec@gmail.com
Gma500 currently removes generic fbdev drivers, but ignores
generic DRM drivers. Use aperture helpers to remove all generic
graphics drivers before loading gma500. Makes gma500 compatible
with simpledrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019080942.24356-1-tzimmermann@suse.de
Right now the only user of psr_pause/resume is intel_cdclk but
additional users will be added in the future and we may need
do reference counting for PSR pause and resume, for now only adding a
warn_on so this cases do not go unnoticed.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jouni Hogander <jouni.hogander@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020003558.222198-2-jose.souza@intel.com
This power domain to disable DC states will be used in places outside
of DPLL, so making the name more generic.
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020003558.222198-1-jose.souza@intel.com
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
bios_golden_init will override dccg_init during init_hw.
[How]
Move dccg_init to after bios_golden_init.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The original latencies were causing underflow in some modes
[how]
Replace with the up-to-date watermark values based on new measurments
Reviewed-by: Ahmad Othman <ahmad.othman@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Z9 latency is higher than when we originally tuned the watermark
parameters, causing underflow. Increasing the value until the latency
issues is resolved.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Immediate flip can be enabled dynamically and has higher BW requirements
when validating which voltage mode to use.
If we validate when it's not set then potentially DCFCLK will be too low
and we will underflow.
[How]
DM always requires support so always require it as part of DML input
parameters.
This can't be enabled unconditionally on older ASIC because it blocks
some expected modes so only target DCN3.1 for now.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Prefetch BW calculated is lower than the DML reference because of a
porting error that's excluding cursor and row bandwidth from the
pixel data bandwidth.
[How]
Change the dml_max4 to dml_max3 and include cursor and row bandwidth
in the same calculation as the rest of the pixel data during vactive.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The requirement is that image width up to 4096 shall be supported
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.
Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Just like we do for internal objects. Also just use
i915_gem_object_set_cache_coherency() here. No need for over-flushing on
LLC platforms.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-9-matthew.auld@intel.com
While the pages can't be swapped out, they can be discarded by the shrinker.
Normally such objects are marked with __I915_MADV_PURGED, which can't be
unset, and therefore requires a new object. For kernel internal objects
this is not true, since the madv hint is reset for our special volatile
objects, such that we can re-acquire new pages, if so desired, without
needing a new object. As a result we should probably be paranoid here
and put the object back into the CPU domain when discarding the pages,
and also correctly set cache_dirty, if required.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-8-matthew.auld@intel.com
Add some details around non-LLC platforms and cflushing, when dealing
with the flush-on-acquire, which is potentially security sensitive.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-7-matthew.auld@intel.com
On non-LLC platforms, force the flush-on-acquire if this is ever
swapped-in. Our async flush path is not trust worthy enough yet(and
happens in the wrong order), and with some tricks it's conceivable for
userspace to change the cache-level to I915_CACHE_NONE after the pages
are swapped-in, and since execbuf binds the object before doing the
async flush, there is a potential race window.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-6-matthew.auld@intel.com
Even though userptr objects are always coherent with the GPU, with no
way for userspace to change this with the set_caching ioctl, even on
non-LLC platforms, there is still the 'Bypass LCC' mocs setting, which
might permit reading the contents of main memory directly.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-5-matthew.auld@intel.com
As pointed out by Thomas, we likely need to flush the pages here if the
GPU can read the page contents directly from main memory. Underneath we
don't know what the sg_table is pointing to, so just add a
wbinvd_on_all_cpus() here, for now.
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-4-matthew.auld@intel.com
These are userspace objects, so mark them as such. In a later patch it's
useful to determine how paranoid we need to be when managing cache
flushes. In theory no functional changes.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-2-matthew.auld@intel.com
These are userspace objects, so mark them as such. In a later patch it's
useful to determine how paranoid we need to be when managing cache
flushes. In theory no functional changes.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-1-matthew.auld@intel.com
Change the error message when the bad_page_threshold is reached,
explicitly stating that the GPU will not be initialized.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is driven by the IP
discovery table now.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is now driven by
amdgpu IP discovery code.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is now driven by
amdgpu IP discovery code.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
raven_device_info is not used when KFD_SUPPORT_IOMMU_V2 is not
set.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hawaii_device_info is not used when CONFIG_DRM_AMDGPU_CIK is not
set.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check was incorrectly converted to IP version checking.
Fixes: 4b0ad84254 ("drm/amdgpu/gfx10: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When selecting between levels in the force performance levels interface
sclk (gfxclk) was not set correctly for all levels. Select the proper
sclk settings for all levels.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1726
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the following coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:427:
WARNING: use scnprintf or sprintf.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an assert that lookups from the intel_dp->common_rates[] array
are always valid.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-7-imre.deak@intel.com
If the DPCD sink rate values read from the sink are invalid, the
driver will sanitize this in intel_dp_set_common_rates(), by setting a
default 162000 link rate in common rates and printing a WARN().
WARN()s should only be triggered by bugs in the code and not by external
factors like the above (an invalid DPCD injected maliciously or read from a
buggy monitor). So fixup the invalid DPCD sink rate values already and print
an error in this case (since it's still a user visible problem).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-6-imre.deak@intel.com
Print an error if the DPCD sink max lane count is invalid and fix it up.
While at it also add an assert that the link max lane count (derived
from intel_dp_max_common_lane_count(), potentially reduced by the LT
fallback logic) value is also valid.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-5-imre.deak@intel.com
Atm until the DPCD for a connector is read the max link rate and lane
count params are invalid. If the connector is modeset, in
intel_dp_compute_config(), intel_dp_common_len_rate_limit(max_link_rate)
will return 0, leading to a intel_dp->common_rates[-1] access.
Fix the above by making sure the max link params are always valid.
The above access leads to an undefined behaviour by definition, though
not causing a user visible problem to my best knowledge, see the previous
patch why. Nevertheless it is an undefined behaviour and it triggers a
BUG() in CONFIG_UBSAN builds, hence CC:stable.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-4-imre.deak@intel.com
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a
intel_dp->common_rates[-1] (*)
access, which is an undefined behaviour, in the following cases:
- In intel_dp_sync_state(), if the encoder is enabled without a sink
connected to the encoder's connector (BIOS enabled a monitor, but the
user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
a sink connected on it, but before probing the connector first.
To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.
I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.
As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
v2: Clear the default sink rates, before initializing these for eDP.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com
Reading out the DP encoders' DPCD during booting or resume is only
required for enabled encoders: such encoders may be modesetted during
the initial commit and the link training this involves depends on an
initialized DPCD. For DDI encoders reading out the DPCD is skipped, do
the same on pre-DDI platforms.
Atm, the first DPCD readout without a sink connected - which is a likely
scneario if the encoder is disabled - leaves intel_dp->num_common_rates
at 0, which resulted in
intel_dp_sync_state()->intel_dp_max_common_rate()
in a
intel_dp->common_rates[-1]
access. This by definition results in an undefined behaviour, though to
my best knowledge in all HW/compiler configurations it actually results
in accessing the array item type value preceding the array. In this
case the preceding value happens to be intel_dp->num_common_rates,
which is 0, so this issue - by luck - didn't cause a user visible
problem.
Nevertheless it's still an undefined behaviour and in CONFIG_UBSAN
builds leads to a kernel BUG() (which revealed this problem for us),
hence CC:stable.
A related problem in case the encoder is enabled but the sink is not
connected or the DPCD readout fails is fixed by the next patch.
v2: Amend the commit message describing the root cause of the
CONFIG_UBSAN BUG().
Fixes: a532cde31d ("drm/i915/tc: Fix TypeC port init/resume time sanitization")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
Reported-and-tested-by: Mat Jonczyk <mat.jonczyk@o2.pl>
Cc: Mat Jonczyk <mat.jonczyk@o2.pl>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-2-imre.deak@intel.com
'drm/ttm/ttm_placement.h' included in
'drivers/gpu/drm/i915/selftests/mock_region.c' is duplicated.
It is also included on the 9 line.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ran Jianping <ran.jianping@zte.com.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019090205.1003458-1-ran.jianping@zte.com.cn
Otherwise, hw_id_name string is NULL for SDMA 2 and 3 when dumping
ip version from VBIOS.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Output a warning message if RAS TA returns UNSUPPORTED_ERROR_INJ status.
v2: implement it in psp_ras_ta_check_status function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create new function to check status returned by RAS TA.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1445d967fb.
This patch introduced a couple of dmesg warnings, this is not a valid
approach anymore. For this reason, we are reverting this patch, and we
need to revert the workaround patch.
v2: squash in unused variable removal (Alex)
Cc: Hanghong Ma <hanghong.ma@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
V3_4 is latest in use.
[How]
Add bios parser support for firmware_info_v3_4 along
with some relevant fields it is also retrieving from dce_info
and smu_info.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
* Fix some issues such as DP2 problem, prefetch bandwidth calculation
for DCN3.1 and others.
* Increased Z9 latency and removed z10 save after dsc disable.
* Revert a couple of bad changes.
* Added missing PSR state patch.
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable hdmistream and hdmichar root clocks when not being used.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
bios_golden_init will override dccg_init during init_hw.
[How]
Move dccg_init to after bios_golden_init.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Z10 save is done during PSR and bootup.
DSC disable does not need to save for Z10.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable dpstreamclk, symclk32_se, and symclk32_le when not in use.
Reviewed-by: Ariel Bernstein <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The original latencies were causing underflow in some modes
[how]
Replace with the up-to-date watermark values based on new measurments
Reviewed-by: Ahmad Othman <ahmad.othman@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Z9 latency is higher than when we originally tuned the watermark
parameters, causing underflow. Increasing the value until the latency
issues is resolved.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Immediate flip can be enabled dynamically and has higher BW requirements
when validating which voltage mode to use.
If we validate when it's not set then potentially DCFCLK will be too low
and we will underflow.
[How]
DM always requires support so always require it as part of DML input
parameters.
This can't be enabled unconditionally on older ASIC because it blocks
some expected modes so only target DCN3.1 for now.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable root clock for dsc when not being used.
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
PSR_STATE2b was introduced on DMCUB side, but not on the driver side,
which caused convert_psr_state helper function to return
PSR_STATE_INVALID. That caused visual lagging during state transition.
[how]
Add PSR_STATE2b to dc_psr_state and convert_psr_state
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Prefetch BW calculated is lower than the DML reference because of a
porting error that's excluding cursor and row bandwidth from the
pixel data bandwidth.
[How]
Change the dml_max4 to dml_max3 and include cursor and row bandwidth
in the same calculation as the rest of the pixel data during vactive.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remap phyd32clk to PHYF and PHYG for B0, PHYC and PHYD are unused
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The requirement is that image width up to 4096 shall be supported
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Error message on Linux when booting.
[How]
Removed power down on boot from DCN31 HW init
to match DCN10 HW init.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Derek Lai <derek.lai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Calculation of scaling ratio can result in a crash due to zero'd src or
dst plane rects.
[How]
Validate that src and dst rects are valid before using for scaling
calculations.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hardware team has recommended to generically hard code this register to
0xFF as part of the effort to eventually remove this control. However
we set it to 0xF instead.
This causes 4 of audio 8ch to be muted.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
One of the current VPG power on calls is unnecessary
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some DP2.0 RX requires us to set MST_EN even for SST configuration.
We added this debug option so we can configure this temporary workaround
for the RX.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When rapidly plugging and unplugging a DP sink, detection link
training can be mistakenly skipped.
This is due to the hotplug processing occurring before the
encoder assignment logic has had a chance to process the removal
of a stream. The encoder that would be used for detection link
training is then erroneously reported as already in use and
detection link training is skipped.
[How]
During hot plug processing, only determine a link encoder to be
unavailable for a particular link if it has been assigned to a
different link.
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When copying a stream, the encoder assigned to it is copied too.
Encoder assignment should only happen when executing the encoder
assignment function link_encs_assign().
[How]
Clear the link encoder pointer for copied stream.
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable root clock for dpp when not being used.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On renoir usb-c port stops functioning on resume after f/w update.
New dmub firmware caused regression due to conflict with dmcu.
With new dmub f/w dmcu is superseded and should be disabled.
[How]
- Disable dmcu for all dcn21.
Check dmesg for dmub f/w version.
The old firmware (before regression):
[drm] DMUB hardware initialized: version=0x00000001
All other versions require this patch for renoir.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_irq_uninstall is called in irq_fini_hw so that irq is disabled in sw
stage. SMU (and maybe other IP blocks) fini_hw will call irq_put for
cleanup and the whole cleanup process will be skipped because of
drm->irq_enable = false.
[How]
Move ip_fini_early before irq_fini_hw.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ROCr needs to be able to identify all devices that have direct access to
fine grain memory, which should include CPUs that are connected to GPUs
over xGMI. The GPU hive ID can be mapped onto the CPU hive ID since the
CPU is part of the hive.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some registers' access will fail without PSP RL after resume.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should unreference a gem object instead of an amdgpu bo here.
Fixes: fd9a9f8801 ("drm/amdgpu: Use GEM obj reference for KFD BOs")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the new link training delay helpers, fixing the delays for
128b/132b.
For existing 8b/10b functionality, this will cause additional 1-byte
DPCD reads for LTTPR delays instead of using the cached values. It's
just too complicated to combine generic helpers with local caching in a
sensible way.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-3-jani.nikula@intel.com
Core Changes:
- drm dp helpers for figuring out link training delays
Merge to drm-intel-next as well after c93ce6a6df ("Merge tag
'topic/drm-dp-training-delay-helpers-2021-10-19' of
git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878ryps5b6.fsf@intel.com
TXTAGOCNT and RXTASURECNT bitfields of BTACNTRL1 register are swapped in
the code, correct them. Driver doesn't implement low power mode for now,
so this change doesn't make a practical difference yet.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-6-digetx@gmail.com
Non-continuous clock mode doesn't work because driver doesn't support it
properly. The bridge driver programs wrong bitfields that are required by
the non-continuous mode (BTACNTRL1 register bitfields are swapped in the
code), but fixing them doesn't help.
Display panel of ASUS Transformer TF700T tablet supports non-continuous
mode and display doesn't work at all using that mode. There are no
device-trees that are actively using this DSI bridge in upstream yet,
so clearly the broken mode wasn't ever tested properly. It's a bit too
difficult to get LP mode working, hence let's disable the offending mode
for now and fall back to continuous mode.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-5-digetx@gmail.com
Calculate video start delay based on the display timing instead
of hardcoding it to a default value. This fixes "trembling" display
output on Asus Transformer TF700T which uses Panasonic VVX10F004B00
display panel.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-4-digetx@gmail.com
Support pulse-mode synchronization which is supported and used by simple
DSI panels like Panasonic VVX10F004B00.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-3-digetx@gmail.com
The driver assumes that reference clock is always-enabled, but this is
hardware-dependent and not true for ASUS Transformer TF700T. Make driver
enable / disable the reference clock.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-2-digetx@gmail.com
struct gtt_range represents a GEM object and should not be used for GTT
setup. Change psb_gtt_insert() and psb_gtt_remove() to receive all
necessary parameters from their caller. This also eliminates possible
failure from psb_gtt_insert().
There's one exception in psb_gtt_restore(), which requires an upcast
from struct resource to struct gtt_range when restoring the GTT after
hibernation. A possible solution would track the GEM objects that need
restoration separately from the GTT resource.
Rename the functions to psb_gtt_insert_pages() and psb_gtt_remove_pages()
to reflect their similarity to MMU interfaces.
v3:
* restore the comments about locking rules (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-10-tzimmermann@suse.de
psb_gtt_alloc_range() allocates struct gtt_range, create the GTT resource
and performs some half-baked initialization. Inline the function into its
only caller psb_gem_create(). For creating the GTT resource, introduce a
new helper, psb_gtt_alloc_resource() that hides the details of the GTT.
For psb_gtt_free_range(), inline the function into its only caller
psb_gem_free_object(). While at it, remove the explicit invocation of
drm_gem_free_mmap_offset(). The mmap offset is already released by
drm_gem_object_release().
v3:
* replace offset[static 1] with pointer notation (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-8-tzimmermann@suse.de
psb_gtt_attach_pages() are not GTT functions but deal with the GEM
object's SHMEM pages. The only callers of psb_gtt_attach_pages() and
psb_gtt_detach_pages() are the GEM pin helpers. Inline the calls and
cleanup the resulting code.
v2:
* unlock gtt_mutex in pin-error handling (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-7-tzimmermann@suse.de
Support private objects for stolen memory in psb_gem_create() and
convert users to psb_gem_create(). For stolen memory, psb_gem_create()
now initializes the GEM object via drm_gem_private_object_init().
In the fbdev setup, replace the open-coded initialization of struct
gtt_range with a call to psb_gem_create(). Use drm_gem_object_put()
for release.
In the cursor setup, use psb_gem_create() and get a real GEM object.
Previously the allocated instance of struct gtt_range was only partially
initialized. Release the cursor GEM object in gma_crtc_destroy(). The
release was missing from the original code.
With the conversion of all callers to psb_gem_create(), the extern
declarations of psb_gtt_alloc_range, psb_gtt_free_range and
psb_gem_object_func are not required any longer. Declare them as
static.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-5-tzimmermann@suse.de
Implement psb_gem_create() for general use. Create the GEM handle in
psb_gem_create_dumb(). Allows to use psb_gem_create() for creating all
of the GEM objects.
While at it, clean-up drm_gem_dumb_create() to make it more readable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-4-tzimmermann@suse.de
Allocation and pinning helpers for struct gtt_range are GEM functions,
so move them to gem.c. No functional changes.
v2:
* keep docs for psb_gtt_{attach,detach}_pages() (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-2-tzimmermann@suse.de
Reuse the 8b/10b link training delay helpers. Functionally this skips
the check for invalid values for DPCD 1.4 and later at clock recovery
delay (as it's a fixed delay and bypasses the rd_interval) but the same
value will be checked and invalid values reported at channel
equalization.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-2-jani.nikula@intel.com
The link training delays are different and/or available in different
DPCD offsets depending on:
- Clock recovery vs. channel equalization
- DPRX vs. LTTPR
- 128b/132b vs. 8b/10b
- DPCD 1.4+ vs. earlier
Add helpers to get the correct delays in us, reading DPCD if
necessary. This is more straightforward than trying to retrofit the
existing helpers to take 128b/132b into account.
Having to pass in the DPCD receiver cap field seems unavoidable, because
reading it involves checking the revision and reading extended receiver
cap. So unfortunately the interface is mixed cached and read as needed.
v2: Remove delay_us < 0 check and the whole local var (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-1-jani.nikula@intel.com
This memory frequency calculated is only used to check if it is zero,
what is not useful as it will never actually be zero.
Also the calculation is wrong, we should be checking other bit to
select the appropriate frequency multiplier while this code is stuck
with a fixed multiplier.
So here dropping it as whole.
v2:
- Also remove memory frequency calculation for gen9 LP platforms
Cc: Yakui Zhao <yakui.zhao@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 5d0c938ec9 ("drm/i915/gen11+: Only load DRAM information from pcode")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013010046.91858-1-jose.souza@intel.com
(cherry picked from commit 83f52364b1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Let's add lpt_pch_disable() as the counterpart to
lpt_pch_enable().
Note that unlike the ilk+ code the fdi_link_train()
and fdi_disable() calls are still left directly in
intel_crt.c. If we wanted to move those we'd need to
add lpt_pch_pre_enable(). But the two fdi direct fdi
calls are pretry symmetric so it doesn't seem too bad
to just keep them as is.
v2: Make lpt_disable_pch_transcoder() static (lkp@intel.com)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-10-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reanme intel_ddi_fdi_post_disable() to hsw_fdi_disable() and
relocate it next to all the other code dealing with FDI_RX.
intel_ddi.c has now been cleansed of FDI_RX.
In order to avoid exposing intel_disable_ddi_buf() outside
intel_ddi.c we can just open code the DDI_BUF_CTL write. The
enable side already has all that stuff open coded so
this actually is more symmetric. But we do need to remeber
to bring the intel_wait_ddi_buf_idle() call over from
inside intel_disable_ddi_buf().
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-9-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Hoover the remaining open coded PCH modeset sequence bits
out from ilk_crtc_disable(). Somewhat annoyingly the
enable vs. disable is a bit asymmetric so we need two
functions for the disable case.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-8-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Move the lpt_get_iclkip() call from hsw_crt_get_config()
since that's where we have the lpt_program_iclkip() call
as well.
Tehcnically this isn't perhaps quite right since iCLKIP
is providing the CRT dotclock. So one can argue all of
it should be directly in intel_crt.c. But since the CRT
port is the only one on the PCH sticking it all into the
PCH code seems OK.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-7-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Pull the ilk+ PCH state readout into its own function and relocate
to the appropriate file.
The clock readout parts are perhaps a bit iffy since we depend
on the gmch DPLL readout code. But we can think about the clock
readout big picture later.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-6-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Nuke the hsw_get_ddi_port_state() eyesore by putting the
readout code into intel_pch_display.c, and calling it directly
from hsw_crt_get_config().
Note that the nuked TRANS_DDI_FUNC_CTL readout from
hsw_get_ddi_port_state() is now etirely redundant since we
get called from the encoder->get_config() so we already know
we're dealing with the correct DDI port. Previously the
code was called from a place where that wasn't known so
it had to checked manually.
v2: Clarify the TRANS_DDI_FUNC_CTL change (Dave)
Nuke the now unused *TRANS_DDI_FUNC_CTL_VAL_TO_PORT() (Dave)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018153525.21597-1-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Use the clean "atomic_state+crtc" approach of passing
arguments to the top level PCH modeset code.
And while at it we can also just pass the whole crtc to
ilk_disable_pch_transcoder().
v2: Elimiate double space between function args (Dave)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-4-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Start moving the code for PCH modeset sequence/etc. to
its own file.
Still not sure about the file name though...
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-3-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Move the PCH refclk stuff (including all the LPT/WPT
iCLKIP/CLKOUT_DP things) to its own file.
We also suck in the mPHY programming from intel_fdi.c
since we're the only caller.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-2-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Until we better understand the stability issues caused by frequent
frequency changes, lets limit them to a618.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20211018153627.2787882-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Based on the removal of the g_dp_display and the movement of the
priv->dp lookup into the DP code it's now possible to have multiple
DP instances.
In line with the other controllers in the MSM driver, introduce a
per-compatible list of base addresses which is used to resolve the
"instance id" for the given DP controller. This instance id is used as
index in the priv->dp[] array.
Then extend the initialization code to initialize struct drm_encoder for
each of the registered priv->dp[] and update the logic for associating
each struct msm_dp with the struct dpu_encoder_virt.
A new enum is introduced to document the connection between the
instances referenced in the dpu_intf_cfg array and the controllers in
the DP driver and sc7180 is updated.
Lastly, bump the number of struct msm_dp instances carries by priv->dp
to 3, the currently known maximum number of controllers found in a
Qualcomm SoC.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-6-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
eDP panels might need some power sequencing and backlight management,
so make it possible to associate a drm_panel with an eDP instance and
prepare and enable the panel accordingly.
Now that we know which hardware instance is DP and which is eDP,
parser->parse() is passed the connector_type and the parser is limited
to only search for a panel in the eDP case.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-5-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
As the following patches introduced support for multiple DP blocks in a
platform and some of those block might be eDP it becomes useful to be
able to specify the connector type per block.
Although there's only a single block at this point, the array of descs
and the search in dp_display_get_desc() are introduced here to simplify
the next patch, that does introduce support for multiple DP blocks.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-4-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Functions in the DisplayPort code that relates to individual instances
(encoders) are passed both the struct msm_dp and the struct drm_encoder.
But in a situation where multiple DP instances would exist this means
that the caller need to resolve which struct msm_dp relates to the
struct drm_encoder at hand.
Store a reference to the struct msm_dp associated with each
dpu_encoder_virt to allow the particular instance to be associate with
the encoder in the following patch.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-3-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
As the Qualcomm DisplayPort driver only supports a single instance of
the driver the commonly used struct dp_display is kept in a global
variable. As we introduce additional instances this obviously doesn't
work.
Replace this with a combination of existing references to adjacent
objects and drvdata.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-2-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There's no such thing as gen13. It is either display 13
or graphics 13. Don't propagate the gen12 confusion
further.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015091650.87270-1-rodrigo.vivi@intel.com
We should stop using the gen name and the "+" to reference
the newer platforms.
And on this case specifically we can simplify the debug
message even further.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015091129.83226-1-rodrigo.vivi@intel.com
blk-cgroup.h pulls in blkdev.h and thus pretty much all the block
headers. Break this dependency chain by turning wbc_blkcg_css into a
macro and dropping the blk-cgroup.h include.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the unconditional clflush() with drm_clflush_virt_range()
which does the wbinvd() fallback when clflush is not available.
This time no justification is given for the clflush in the
offending commit.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 2c8ab3339e ("drm/i915: Pin timeline map after first timeline pin, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-4-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
This one is apparently a "clflush for good measure", so bit more
justification (if you can call it that) than some of the others.
Convert to drm_clflush_virt_range() again so that machines without
clflush will survive the ordeal.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com> #v1
Fixes: 12ca695d2c ("drm/i915: Do not share hwsp across contexts any more, v8.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-3-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Not all machines have clflush, so don't go assuming they do.
Not really sure why the clflush is even here since hwsp
is supposed to get snooped I thought.
Although in my case we're talking about a i830 machine where
render/blitter snooping is definitely busted. But it might
work for the hswp perhaps. Haven't really reverse engineered
that one fully.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: b436a5f8b6 ("drm/i915/gt: Track all timelines created using the HWSP")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-2-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
intel_load_plane_csc_black() is specific to icl+ so deserves
a name reflecting that fact. Also rename the variables to
standard form so I won't get confused reading the code.
v2: icl+ not glk+
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006235704.28894-5-ville.syrjala@linux.intel.com
Reviewed-by: Juston Li <juston.li@intel.com>
We are inside the vblank evade critical section here, racing
against the raster beam. There is no time to print debug
messages.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006235704.28894-4-ville.syrjala@linux.intel.com
Reviewed-by: Juston Li <juston.li@intel.com>
There's lots of expensive stuff inserted between the PLANE_CTL
and PLANE_SURF writes even though the comment before the PLANE_CTL
write says not to put stuff there. Move it all to a more apporiate
place.
There's also a weird PLANE_COLOR_CTL RMW in there. I guess because
force_black was computed way too late originally, but that is now
sorted.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006235704.28894-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
No real reason to have this pxp state computation in
intel_atomic_check_planes(). Just stuff it into skl_plane_check().
There was also some funny state copying being done from the
old plane state to the new plane state when the plane is anyway
disabled.
The one thing we presumably must remember to do is copy
over the decrypt state when assigning a Y plane for planar
YCbCr scanout, so that the Y plane's PLANE_SURF will get the
appropriate bit set. The force_black thing should not matter
as I'm pretty sure all that stuff is ignored for the Y plane.
I suppose this was the reason for the odd placement for the
state computation, but I see no reason to deviate from the
standard way of doing these things. This also guarantees
that we don't calculate things differently between the
linked UV and Y plane.
v2: Only do stuff for icl+ since 'force_black' depends
on the plane CSC which is an icl+ feature
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006235704.28894-2-ville.syrjala@linux.intel.com
Reviewed-by: Juston Li <juston.li@intel.com> #v1
A new warning in clang points out a place in this file where a bitwise
OR is being used with boolean types:
drivers/gpu/drm/i915/intel_pm.c:3066:12: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This construct is intentional, as it allows every one of the calls to
ilk_increase_wm_latency() to occur (instead of short circuiting with
logical OR) while still caring about the result of each call.
To make this clearer to the compiler, use the '|=' operator to assign
the result of each ilk_increase_wm_latency() call to changed, which
keeps the meaning of the code the same but makes it obvious that every
one of these calls is expected to happen.
Link: https://github.com/ClangBuiltLinux/linux/issues/1473
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Dávid Bolvanský <david.bolvansky@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014211916.3550122-1-nathan@kernel.org
Fix some error handling here noticed in review of other changes.
Fixes: 2d4f7bdafd ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.4.I8bb7a91ecc411d56bc155763faa15f289d7fc074@changeid
Our probe() function never enabled this clock, so we shouldn't disable
it if we fail to probe the bridge.
Noted by inspection.
Fixes: 2d4f7bdafd ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.3.Ie8ceefb51ab6065a1151869b6fcda41a467d4d2c@changeid
Since commit 43c2de1002 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we perform most HW configuration in the bind()
function. This configuration may be lost on suspend/resume, so we
need to call it again. That may lead to errors like this after system
suspend/resume:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet).
Note that early mailing list versions of this driver borrowed Rockchip's
downstream/BSP solution, to do HW configuration in mode_set() (which
*is* called at the appropriate pre-enable() times), but that was
discarded along the way. I've avoided that still, because mode_set()
documentation doesn't suggest this kind of purpose as far as I can tell.
Fixes: 43c2de1002 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.2.I4e9d93aadb00b1ffc7d506e3186a25492bf0b732@changeid
In commit 43c2de1002 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we moved most HW configuration to bind(), but we
didn't move the runtime PM management. Therefore, depending on initial
boot state, runtime-PM workqueue delays, and other timing factors, we
may disable our power domain in between the hardware configuration
(bind()) and when we enable the display. This can cause us to lose
hardware state and fail to configure our display. For example:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-innolux-p079zca ff960000.mipi.0: failed to write command 0
or:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
We should match the runtime PM to the lifetime of the bind()/unbind()
cycle.
Tested on Acer Chrometab 10 (RK3399 Gru-Scarlet), with panel drivers
built either as modules or built-in.
Side notes: it seems one is more likely to see this problem when the
panel driver is built into the kernel. I've also seen this problem
bisect down to commits that simply changed Kconfig dependencies, because
it changed the order in which driver init functions were compiled into
the kernel, and therefore the ordering and timing of built-in device
probe.
Fixes: 43c2de1002 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Link: https://lore.kernel.org/linux-rockchip/9aedfb528600ecf871885f7293ca4207c84d16c1.camel@gmail.com/
Reported-by: <aleksandr.o.makarov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.1.Ic2904d37f30013a7f3d8476203ad3733c186827e@changeid
If hardware is malfunctioning (e.g., misconfigured clocks?), we can get
stuck here forever, holding various DRM locks and eventually locking up
the entire system. It's better to complain loudly and move on, than to
lock up the system.
In local tests, this operation takes less than 20ms.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211008153102.1.I2a5dbaaada35023a9703a8db7af501528fbb6e31@changeid
Currently a plain integer is being used to nullify the pointer
struct v3d_submit_ext *se. Use NULL instead. Cleans up sparse
warnings:
drivers/gpu/drm/v3d/v3d_gem.c:777:53: warning: Using plain integer as
NULL pointer
drivers/gpu/drm/v3d/v3d_gem.c:1010:45: warning: Using plain integer as
NULL pointer
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1634282081-72255-1-git-send-email-yang.lee@linux.alibaba.com
Add a driver for panels using the Novatek NT35950 Display Driver IC,
including support for the Sharp LS055D1SX04, found in some Sony Xperia
Z5 Premium and XZ Premium smartphones.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173127.998901-1-angelogioacchino.delregno@somainline.org
Current code always sets reset line low in .pre_enable callback and
holds it low for 10ms. This is sub-optimal and increases the time
between enablement of the DSI83 and valid LVDS clock.
Rework the reset handling such that the reset line is held low for 10ms
both in probe() of the driver and .disable callback, which guarantees
that the reset line was always held low for more than 10ms and therefore
the reset line timing requirement is satisfied. Furthermore, move the
reset handling into .enable callback so the entire DSI83 initialization
is now in one place.
This reduces DSI83 enablement delay by up to 10ms.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016210402.171595-1-marex@denx.de
W552946ABA is a panel by Wanchanglong. This panel utilizes the
Ilitek ILI9881D controller.
Add this panel's initialzation sequence and timing to ILI9881D driver.
Tested on px30-evb v11
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016102232.202119-3-michael@amarulasolutions.com
The msm_gem_new_impl() function cleans up after itself so there is no
need to call drm_gem_object_put(). Conceptually, it does not make sense
to call a kref_put() function until after the reference counting has
been initialized which happens immediately after this call in the
drm_gem_(private_)object_init() functions.
In the msm_gem_import() function the "obj" pointer is uninitialized, so
it will lead to a crash.
Fixes: 05b849111c ("drm/msm: prime support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081315.GG6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
The "msm_obj->node" list needs to be initialized earlier so that the
list_del() in msm_gem_free_object() doesn't experience a NULL pointer
dereference.
Fixes: 6ed0897cd8 ("drm/msm: Fix debugfs deadlock")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081133.GF6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a missing unlock on the error path if drm_sched_entity_init() fails.
Fixes: 68002469e5 ("drm/msm: One sched entity per process per priority")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211011124005.GE15188@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>
The "dp_debug" show function allocates a buffer and piecemeal appends
line by line, checking for buffer overflows etc.
Migrate the function to seq_file, to remove all the extra book keeping
and simplify the function.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007190211.3158868-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The debugfs code is provided an array of a single drm_connector. Then to
access the connector, the list of all connectors of the DRM device is
traversed and all non-DisplayPort connectors are skipped, to find the
one and only DisplayPort connector.
But as we move to support multiple DisplayPort controllers this will now
find multiple connectors and has no way to distinguish them.
Pass the single connector to dp_debug_get() and use this in the debugfs
functions instead, both to simplify the code and the support the
multiple instances.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211015232213.1839472-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
First argument of cx_debugbus_read() should be 'void __iomem *' rather
than 'void * __iomem' to make sparse happy.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211002183118.748841-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use clk_bulk_* API instead of hand-coding them. Note, this drops support
for legacy clk naming (e.g. "iface_clk" instead of just "iface"),
however all in-kernel device trees were converted long long ago. The
warning is present there since 2017.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002012715.691406-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a short delay before clamping to idle frequency on active->idle
transition. It takes ~0.5ms to increase the freq again on the next
idle->active transition, so this helps avoid extra freq transitions
on workloads that bounce between CPU and GPU.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927230455.1066297-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Not all platforms has P0 at an offset of 0x1000 from the base address,
so add support for specifying each sub-region in DT. The code falls back
to the predefined offsets in the case that only a single reg is
specified, in order to support existing DT.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-6-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Not all platforms has DP_P0 at offset 0x1000 from the beginning of the
DP block. So split the dss_io_data memory region into a set of
sub-regions, to make it possible in the next patch to specify each of
the sub-regions individually.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-5-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In order to deal with multiple memory ranges in the following commit
change the ioremap wrapper to not poke directly into the dss_io_data
struct.
While at it, devm_ioremap_resource() already prints useful error
messages on failure, so omit the unnecessary prints from the caller.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211001174400.981707-4-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The non-devres version of ioremap is used, which requires manual
cleanup. But the code paths leading here is mixed with other devres
users, so rely on this for ioremap as well to simplify the code.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-3-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The msm_iommu_new() returns error pointers on failure so check for that
to avoid an Oops.
Fixes: ccac7ce373 ("drm/msm: Refactor address space initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004103806.GD25015@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
There are two problems here:
1) The "seqptr" is used uninitalized when we free it at the end.
2) The a6xx_gmu_get_mmio() function returns error pointers. It never
returns true.
Fixes: 64245fc551 ("drm/msm/a6xx: use AOP-initialized PDC for a650")
Fixes: f8fc924e08 ("drm/msm/a6xx: Fix PDC register overlap")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004134530.GB11689@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The DSI host might be left in some state by the bootloader. If this
state generates an IRQ, it might hang the system by holding the
interrupt line before the driver sets up the DSI host to the known
state.
Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to
it. Call enable/disable_irq after msm_dsi_host_power_on/_off()
functions, so that we can be sure that the interrupt is delivered when
the host is in the known state.
It is not possible to defer the interrupt enablement to a later point,
because drm_panel_prepare might need to communicate with the panel over
the DSI link and that requires working interrupt.
Fixes: a689554ba6 ("drm/msm: Initial add DSI connector support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
MDP version v1.16 is almost identical to v1.15 with most significant
difference being presence of second DSI interface. MDP v1.16 is found on
SoCs such as MSM8x53, SDM450, SDM632 (All with Adreno 506).
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210928131929.18567-4-sireeshkodali1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add phy configuration for 14nm dsi phy found on MSM8953 SoC. Only
difference from existing configurations are io_start addresses.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Link: https://lore.kernel.org/r/20210928131929.18567-3-sireeshkodali1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
dev_pm_opp_find_freq_exact never return null but ERR_PTR(),so we
should use IS_ERR() to clarify and avoid compilation warnings.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1604630714-6163-1-git-send-email-wangqing@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Using DEFINE_DEBUGFS_ATTRIBUTE macro with debugfs_create_file_unsafe()
function in place of the debugfs_create_file() function will make the
file operation struct "reset" aware of the file's lifetime. Additional
details here: https://lists.archive.carbon60.com/linux/kernel/2369498
Issue reported by Coccinelle script:
scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/9ca2c2e4cbd9ebb282b90f742305fd9b481aacc2.1603998014.git.mh12gx2825@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201231094935.25737-1-vulab@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201231095616.25973-1-vulab@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201231094155.25481-1-vulab@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix sparse warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1195:41: warning: Using plain integer as NULL pointer
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1348:32: warning: Using plain integer as NULL pointer
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Link: https://lore.kernel.org/r/20210510031250.5303-1-bernard@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Coverity complains of a possible NULL dereference:
CID 120718 (#1 of 1): Dereference null return value (NULL_RETURNS)
23. dereference: Dereferencing a pointer that might be NULL state->bos when
calling msm_gpu_crashstate_get_bo. [show details]
301 msm_gpu_crashstate_get_bo(state, submit->bos[i].obj,
302 submit->bos[i].iova, submit->bos[i].flags);
Fix this by employing the same state->bos NULL check as is used in the next
for loop.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210929162554.14295-1-tim.gardner@canonical.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The variable bpp is being initialized with a value that is never
read, it is being updated later on in both paths of an if statement.
The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210929105458.209895-1-colin.king@canonical.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These aren't used. And if we add use for them later, we should probably
do something a bit more structured than string parsing.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210928162903.1104847-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
For now, since we have a mix of bridges which support this flag, which
which do *not* support this flag, or work both ways, try it once with
NO_CONNECTOR and then fall back to the old way if that doesn't work.
Eventually we can drop the fallback path.
v2: Add missing drm_connector_attach_encoder() so display actually comes
up when the bridge properly handles the NO_CONNECTOR flag
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210920225801.227211-2-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The only usage of hdmi_8996_pll_ops is to assign its address to the ops
field in the clk_init_data struct, and the only usage of pll_init is to
assign its address to the init field in the clk_hw struct, both which
are pointers to const. Make them const to allow the compiler to put them
in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210920212014.40520-1-rikard.falkeborn@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
div_u64_rem provides the result of the division and additionally the
remainder; don't use this function to solely calculate the remainder
while calculating the division again with div_u64.
A similar improvement was applied earlier to the 10nm pll in
5c191fef4c ("drm/msm/dsi_pll_10nm: Fix dividing the same numbers
twice").
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211011201642.167700-1-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
[why]
vsync_cnt atomic counter increments for every hw vsync. On the other
hand, frame count is a register that increments when the frame gets
actually pushed out. We cannnot read this register whenever the timing
engine is off, but vblank counter should still return a valid number.
This behavior also matches the downstream driver.
[How]
Read the encoder vsync count instead of the dpu_encoder_phys frame
count.
Suggested-by: Abhinav Kumar <abhinavk@codeaurora.org>
CC: Rob Clark <robdclark@chromium.org>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210830181359.124267-1-markyacoub@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
As dpu_core_irq was merged into dpu_hw_intr, merge data structures too,
removing the need for a separate data structure.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210617222029.463045-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We already clear the IRQ status register before processing IRQs, so do
not clear the register again. Especially do not clear the IRQ status
_after_ processing the IRQ as this way we can loose the event.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210617222029.463045-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
With dpu_core_irq being the wrapper around dpu_hw_interrupts, there is
little sense in having them separate. Squash them together to remove
another layer of abstraction (hw_intr ops).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210617222029.463045-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch adds support for Newhaven's NHD-1.8-128160EF display, featuring
an Ilitek ILI9163 controller.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015150131.1020878-3-daniel@zonque.org
During the review I focused on stop the using of the "+"
to reference the newer platforms, but I forgot that we are
in a process of making things more clear and differentiate
graphics and display versions. So, let me to clean up this
a bit. Also, we don't need any version mentioned in the
config menu entry, only in the help.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015090916.82968-1-rodrigo.vivi@intel.com
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the following coccicheck warning:
drivers/gpu/drm/panel/panel-dsi-cm.c:251: WARNING: use scnprintf or sprintf.
drivers/gpu/drm/panel/panel-dsi-cm.c:271: WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634280490-4429-1-git-send-email-wangqing@vivo.com
Parallel submission create composite fences (dma_fence_array) for excl /
shared slots in objects. The I915_GEM_BUSY IOCTL checks these slots to
determine the busyness of the object. Prior to patch it only check if
the fence in the slot was a i915_request. Update the check to understand
composite fences and correctly report the busyness.
v2:
(Tvrtko)
- Remove duplicate BUILD_BUG_ON
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-24-matthew.brost@intel.com
If an object in the excl or shared slot is a composite fence from a
parallel submit and the current request in the conflict tracking is from
the same parallel context there is no need to enforce ordering as the
ordering is already implicit. Make the request conflict tracking
understand this by comparing a parallel submit's parent context and
skipping conflict insertion if the values match.
v2:
(John Harrison)
- Reword commit message
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-23-matthew.brost@intel.com
If an error occurs in the front end when multi-lrc requests are getting
generated we need to skip these in the backend but we still need to
emit the breadcrumbs seqno. An issues arises because with multi-lrc
breadcrumbs there is a handshake between the parent and children to make
forward progress. If all the requests are not present this handshake
doesn't work. To work around this, if multi-lrc request has an error we
skip the handshake but still emit the breadcrumbs seqno.
v2:
(John Harrison)
- Add comment explaining the skipping of the handshake logic
- Fix typos in the commit message
v3:
(John Harrison)
- Fix up some comments about the math to NOP the ring
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-22-matthew.brost@intel.com
Allow multiple batch buffers to be submitted in a single execbuf IOCTL
after a context has been configured with the 'set_parallel' extension.
The number batches is implicit based on the contexts configuration.
This is implemented with a series of loops. First a loop is used to find
all the batches, a loop to pin all the HW contexts, a loop to create all
the requests, a loop to submit (emit BB start, etc...) all the requests,
a loop to tie the requests to the VMAs they touch, and finally a loop to
commit the requests to the backend.
A composite fence is also created for the generated requests to return
to the user and to stick in dma resv slots.
No behavior from the existing IOCTL should be changed aside from when
throttling because the ring for a context is full. In this situation,
i915 will now wait while holding the object locks. This change was done
because the code is much simpler to wait while holding the locks and we
believe there isn't a huge benefit of dropping these locks. If this
proves false we can restructure the code to drop the locks during the
wait.
IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Matthew Brost)
- Return proper error value if i915_request_create fails
v3:
(John Harrison)
- Add comment explaining create / add order loops + locking
- Update commit message explaining different in IOCTL behavior
- Line wrap some comments
- eb_add_request returns void
- Return -EINVAL rather triggering BUG_ON if cmd parser used
(Checkpatch)
- Check eb->batch_len[*current_batch]
v4:
(CI)
- Set batch len if passed if via execbuf args
- Call __i915_request_skip after __i915_request_commit
(Kernel test robot)
- Initialize rq to NULL in eb_pin_timeline
v5:
(John Harrison)
- Fix typo in comments near bb order loops
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-21-matthew.brost@intel.com
For some users of multi-lrc, e.g. split frame, it isn't safe to preempt
mid BB. To safely enable preemption at the BB boundary, a handshake
between parent and child is needed, syncing the set of BBs at the
beginning and end of each batch. This is implemented via custom
emit_bb_start & emit_fini_breadcrumb functions and enabled by default if
a context is configured by set parallel extension.
Lastly, this patch updates the process descriptor to the correct size as
the memory used in the handshake is directly after the process
descriptor.
v2:
(John Harrison)
- Fix a few comments wording
- Add struture for parent page layout
v3:
(John Harrison)
- A structure for sync semaphore
- Use offsetof to calc address
- Update commit message
v4:
(John Harrison)
- Fix typos in comment explaining memory map of scratch page
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-20-matthew.brost@intel.com
Introduce 'set parallel submit' extension to connect UAPI to GuC
multi-lrc interface. Kernel doc in new uAPI should explain it all.
IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Daniel Vetter)
- Add IGT link and placeholder for media UMD link
v3:
(Kernel test robot)
- Fix warning in unpin engines call
(John Harrison)
- Reword a bunch of the kernel doc
v4:
(John Harrison)
- Add comment why perma-pin is done after setting gem context
- Update some comments / docs for proto contexts
v5:
(John Harrison)
- Rework perma-pin comment
- Add BUG_IN if context is pinned when setting gem context
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-17-matthew.brost@intel.com
Display the workqueue status in debugfs for GuC contexts that are in
parent-child relationship.
v2:
(John Harrison)
- Output number children in debugfs
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-16-matthew.brost@intel.com
Update context and full GPU reset to work with multi-lrc. The idea is
parent context tracks all the active requests inflight for itself and
its children. The parent context owns the reset replaying / canceling
requests as needed.
v2:
(John Harrison)
- Simply loop in find active request
- Add comments to find ative request / reset loop
v3:
(John Harrison)
- s/its'/its/g
- Fix comment when searching for active request
- Reorder if state in __guc_reset_context
v4:
(Kernel test robot)
- Delete unused is_multi_lrc function
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-15-matthew.brost@intel.com
The GuC must receive requests in the order submitted for contexts in a
parent-child relationship to function correctly. To ensure this, insert
a submit fence between the current request and last request submitted
for requests / contexts in a parent child relationship. This is
conceptually similar to a single timeline.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-14-matthew.brost@intel.com
Implement multi-lrc submission via a single workqueue entry and single
H2G. The workqueue entry contains an updated tail value for each
request, of all the contexts in the multi-lrc submission, and updates
these values simultaneously. As such, the tasklet and bypass path have
been updated to coalesce requests into a single submission.
v2:
(John Harrison)
- s/wqe/wqi
- Use FIELD_PREP macros
- Add GEM_BUG_ONs ensures length fits within field
- Add comment / white space to intel_guc_write_barrier
(Kernel test robot)
- Make need_tasklet a static function
v3:
(Docs)
- A comment for submission_stall_reason
v4:
(Kernel test robot)
- Initialize return value in bypass tasklt submit function
(John Harrison)
- Add comment near work queue defs
- Add BUILD_BUG_ON to ensure WQ_SIZE is a power of 2
- Update write_barrier comment to talk about work queue
v5:
(John Harrison)
- Fix typo in work queue comment
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-13-matthew.brost@intel.com
Parallel contexts are perma-pinned by the upper layers which makes the
backend implementation rather simple. The parent pins the guc_id and
children increment the parent's pin count on pin to ensure all the
contexts are unpinned before we disable scheduling with the GuC / or
deregister the context.
v2:
(Daniel Vetter)
- Perma-pin parallel contexts
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-12-matthew.brost@intel.com
Assign contexts in parent-child relationship consecutive guc_ids. This
is accomplished by partitioning guc_id space between ones that need to
be consecutive (1/16 available guc_ids) and ones that do not (15/16 of
available guc_ids). The consecutive search is implemented via the bitmap
API.
This is a precursor to the full GuC multi-lrc implementation but aligns
to how GuC mutli-lrc interface is defined - guc_ids must be consecutive
when using the GuC multi-lrc interface.
v2:
(Daniel Vetter)
- Explicitly state why we assign consecutive guc_ids
v3:
(John Harrison)
- Bring back in spin lock
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-11-matthew.brost@intel.com
In GuC parent-child contexts the parent context controls the scheduling,
ensure only the parent does the scheduling operations.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-10-matthew.brost@intel.com
Add multi-lrc context registration H2G. In addition a workqueue and
process descriptor are setup during multi-lrc context registration as
these data structures are needed for multi-lrc submission.
v2:
(John Harrison)
- Move GuC specific fields into sub-struct
- Clean up WQ defines
- Add comment explaining math to derive WQ / PD address
v3:
(John Harrison)
- Add PARENT_SCRATCH_SIZE define
- Update comment explaining multi-lrc register
v4:
(John Harrison)
- Move PARENT_SCRATCH_SIZE to common file
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-9-matthew.brost@intel.com
Introduce context parent-child relationship. Once this relationship is
created all pinning / unpinning operations are directed to the parent
context. The parent context is responsible for pinning all of its
children and itself.
This is a precursor to the full GuC multi-lrc implementation but aligns
to how GuC mutli-lrc interface is defined - a single H2G is used
register / deregister all of the contexts simultaneously.
Subsequent patches in the series will implement the pinning / unpinning
operations for parent / child contexts.
v2:
(Daniel Vetter)
- Add kernel doc, add wrapper to access parent to ensure safety
v3:
(John Harrison)
- Fix comment explaing GEM_BUG_ON in to_parent()
- Make variable names generic (non-GuC specific)
v4:
(John Harrison)
- s/its'/its/g
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-8-matthew.brost@intel.com
Expose logical engine instance to user via query engine info IOCTL. This
is required for split-frame workloads as these needs to be placed on
engines in a logically contiguous order. The logical mapping can change
based on fusing. Rather than having user have knowledge of the fusing we
simply just expose the logical mapping with the existing query engine
info IOCTL.
IGT: https://patchwork.freedesktop.org/patch/445637/?series=92854&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Daniel Vetter)
- Add IGT link, placeholder for media UMD
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-7-matthew.brost@intel.com
Add logical engine mapping. This is required for split-frame, as
workloads need to be placed on engines in a logically contiguous manner.
v2:
(Daniel Vetter)
- Add kernel doc for new fields
v3:
(Tvrtko)
- Update comment for new logical_mask field
v4:
(John Harrison)
- Update comment for new logical_mask field
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-6-matthew.brost@intel.com
Calling switch_to_kernel_context isn't needed if the engine PM reference
is taken while all user contexts are pinned as if don't have PM ref that
guarantees that all user contexts scheduling is disabled. By not calling
switch_to_kernel_context we save on issuing a request to the engine.
v2:
(Daniel Vetter)
- Add FIXME comment about pushing switch_to_kernel_context to backend
v3:
(John Harrison)
- Update commit message
- Fix workding comment
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-5-matthew.brost@intel.com
Taking a PM reference to prevent intel_gt_wait_for_idle from short
circuiting while any user context has scheduling enabled. Returning GT
idle when it is not can cause all sorts of issues throughout the stack.
v2:
(Daniel Vetter)
- Add might_lock annotations to pin / unpin function
v3:
(CI)
- Drop intel_engine_pm_might_put from unpin path as an async put is
used
v4:
(John Harrison)
- Make intel_engine_pm_might_get/put work with GuC virtual engines
- Update commit message
v5:
- Update commit message again
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-4-matthew.brost@intel.com
Taking a PM reference to prevent intel_gt_wait_for_idle from short
circuiting while a deregister context H2G is in flight. To do this must
issue the deregister H2G from a worker as context can be destroyed from
an atomic context and taking GT PM ref blows up. Previously we took a
runtime PM from this atomic context which worked but will stop working
once runtime pm autosuspend in enabled.
So this patch is two fold, stop intel_gt_wait_for_idle from short
circuting and fix runtime pm autosuspend.
v2:
(John Harrison)
- Split structure changes out in different patch
(Tvrtko)
- Don't drop lock in deregister_destroyed_contexts
v3:
(John Harrison)
- Flush destroyed contexts before destroying context reg pool
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-3-matthew.brost@intel.com
Move guc_id allocation under submission state sub-struct as a future
patch will reuse the spin lock as a global submission state lock. Moving
this into sub-struct makes ownership of fields / lock clear.
v2:
(Docs)
- Add comment for submission_state sub-structure
v3:
(John Harrison)
- Fixup a few comments
v4:
(John Harrison)
- Fix typo
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-2-matthew.brost@intel.com
Fix the following build/link error by adding a dependency on the CRC32
routines:
ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe':
panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le'
Fixes: 17fd7a9d32 ("drm/panel: Add support for Olimex LCD-OLinuXino panel")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix a build error on CONFIG_UML, which does not support (provide)
wbinvd(). UML can use the generic mb() instead.
../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’:
../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration]
wbinvd();
^~~~~~
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit 64f7c698be ("drm/nouveau/fifo: add engine_id hook") replaced
fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of
fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned
from the later g84_fifo_engine_id() are incremented by 1 compared to
the previous g84_fifo_chan_engine() return values.
This is fine either way for most of the code, except this one line
where an engine bit programmed into the hardware is derived from the
return value. Decrement the return value accordingly, otherwise the
wrong engine bit is programmed into the hardware and that leads to
the following failure:
nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420
On the following hardware:
lspci -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2)
lspci -ns 01:00.0
01:00.0 0300: 10de:0a3c (rev a2)
Fixes: 64f7c698be ("drm/nouveau/fifo: add engine_id hook")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org> # 5.12+
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
Hyper-V supports a hardware cursor feature. It is not used by Linux VM,
but the Hyper-V host still draws a point as an extra mouse pointer,
which is unwanted, especially when Xorg is running.
The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer.
When the hyperv_drm driver was developed, the function synthvid_send_ptr()
was not copied from the hyperv_fb driver. Fix the issue by adding the
function into hyperv_drm.
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Clamp the fbdev surface size of the available maximumi height to avoid
failing to init console emulation. An example error is shown below.
bad framebuffer height 2304, should be >= 768 && <= 768
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22)
This is especially a problem with drivers that have very small screen
sizes and cannot over-allocate at all.
v2:
* reduce warning level (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Amanoel Dawod <kernel@amanoeldawod.com>
Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com>
Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
In commit e11f5bd822 ("drm: Add support for DP 1.4 Compliance edid
corruption test") the function connector_bad_edid() started assuming
that the memory for the EDID passed to it was big enough to hold
`edid[0x7e] + 1` blocks of data (1 extra for the base block). It
completely ignored the fact that the function was passed `num_blocks`
which indicated how much memory had been allocated for the EDID.
Let's fix this by adding a bounds check.
This is important for handling the case where there's an error in the
first block of the EDID. In that case we will call
connector_bad_edid() without having re-allocated memory based on
`edid[0x7e]`.
Fixes: e11f5bd822 ("drm: Add support for DP 1.4 Compliance edid corruption test")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid
Signed-off-by: Dave Airlie <airlied@redhat.com>
The following interfaces:
i915_wedged
i915_forcewake_user
are dependent on gt values. Put them inside gt/ and drop the
"i915_" prefix name. This would be the new structure:
dri/0/gt
|
+-- forcewake_user
|
\-- reset
For backwards compatibility with existing igt (and the slight
semantic difference between operating on the i915 abi entry
points and the deep gt info):
dri/0
|
+-- i915_wedged
|
\-- i915_forcewake_user
remain at the top level.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012221738.16029-1-andi@etezian.org
5.15-rc1 crashes with blank screen when booting up on two ThinkPads
using i915. Bisections converge convincingly, but arrive at different
and surprising "culprits", none of them the actual culprit.
netconsole (with init_netconsole() hacked to call i915_init() when
logging has started, instead of by module_init()) tells the story:
kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245!
with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify().
I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that
function needs to be 4-byte aligned.
v2:
(Jani Nikula)
- Change BUG_ON to WARN_ON
v3:
(Jani / Tvrtko)
- Short circuit __i915_sw_fence_init on WARN_ON
v4:
(Lucas)
- Break WARN_ON changes out in a different patch
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922015039.26411-1-matthew.brost@intel.com
We don't have hpd support on i8xx/i915 which means hotplug_funcs==NULL.
Let's not oops when loading the driver on one those machines.
v2: Drop the redundant function pointer check (Jani)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: cd030c7c11 ("drm/i915: constify hotplug function vtable.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
This memory frequency calculated is only used to check if it is zero,
what is not useful as it will never actually be zero.
Also the calculation is wrong, we should be checking other bit to
select the appropriate frequency multiplier while this code is stuck
with a fixed multiplier.
So here dropping it as whole.
v2:
- Also remove memory frequency calculation for gen9 LP platforms
Cc: Yakui Zhao <yakui.zhao@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 5d0c938ec9 ("drm/i915/gen11+: Only load DRAM information from pcode")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013010046.91858-1-jose.souza@intel.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104658.11834-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104650.11781-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104642.11728-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104635.11675-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104627.11622-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104620.11569-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104612.11516-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104247.11270-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104240.11217-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104232.11164-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104225.11111-1-caihuoqing@baidu.com
Many DSI panel drivers fail to clean up their panel references on
mipi_dsi_attach() failure, so we're leaving a dangling drm_panel
reference to freed memory. Clean that up on failure.
Noticed by inspection, after seeing similar problems on other drivers.
Therefore, I'm not marking Fixes/stable.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.3.If9e74fa9b1d6eaa9e0e5b95b2b957b992740251c@changeid
If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.
This problem exists since the driver's introduction, but is especially
relevant after refactored for dual-DSI variants.
Fixes: 14c8f2e9f8 ("drm/panel: add Innolux P079ZCA panel driver")
Fixes: 7ad4e4636c ("drm/panel: p079zca: Refactor panel driver to support multiple panels")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
I got a null-ptr-deref report:
[drm:drm_dev_init [drm]] *ERROR* Cannot allocate anonymous inode: -12
==================================================================
BUG: KASAN: null-ptr-deref in iput+0x3c/0x4a0
...
Call Trace:
dump_stack_lvl+0x6c/0x8b
kasan_report.cold+0x64/0xdb
__asan_load8+0x69/0x90
iput+0x3c/0x4a0
drm_dev_init_release+0x39/0xb0 [drm]
drm_managed_release+0x158/0x2d0 [drm]
drm_dev_init+0x3a7/0x4c0 [drm]
__devm_drm_dev_alloc+0x55/0xd0 [drm]
mi0283qt_probe+0x8a/0x2b5 [mi0283qt]
spi_probe+0xeb/0x130
...
entry_SYSCALL_64_after_hwframe+0x44/0xae
If drm_fs_inode_new() fails in drm_dev_init(), dev->anon_inode will point
to PTR_ERR(...) instead of NULL. This will result in null-ptr-deref when
drm_fs_inode_free(dev->anon_inode) is called.
drm_dev_init()
drm_fs_inode_new() // fail, dev->anon_inode = PTR_ERR(...)
drm_managed_release()
drm_dev_init_release()
drm_fs_inode_free() // access non-existent anon_inode
Define a temp variable and assign it to dev->anon_inode if the temp
variable is not PTR_ERR.
Fixes: 2cbf7fc671 ("drm: Use drmm_ for drm_dev_init cleanup")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013114139.4042207-1-wanghai38@huawei.com
The model and make of the LCD panel of the Vivax TPC-9150 is unknown,
hence the panel settings that were retrieved with a FEX dump are named
after the device NOT the actual panel.
The LCD in question is a 50 pin MISO TFT LCD panel of the resolution
1024x600 used by the aforementioned device.
Version 2, as Thierry kindly suggested that I fix the order in which the
panel was ordered compared to others.
Version 3, filling in the required info suggested by Sam. Plus some
factual issues that I've corrected myself (tested working)
Version 4, rearranged the display parameters and fix invalid bit format
issue. (Thanks Sam)
Version 5, referred to FEX file instead of manual debugging for
information.
Version 6, same as above. This time, it'll be documented.
A bit of context first: I experimented with this a long time ago whilst
I was first learning how to get Linux running on Allwinner boards, I
didn't have many resources at hand so this was quite slow. Anyways, I
stumbled upon this guide (https://linux-sunxi.org/LCD) and was reading
about how to setup the LCD for my tablet. Since I was able to make a
proper FEX dump, I was also able to read the correct parameters for
myself without relying on leaked documents or part numbers and whatnot.
In the FEX dump the value lcd_frm IS SET to 1, which means, at least
according to the document, that this display is INDEED an 18 bit per
pixel panel. Compiling U-Boot and seeing the tux in proper colors
confirmed this. As per Sam Ravnborg's suggestion, I've changed the panel
to his format "MEDIA_BUS_FMT_RGB666_1X7X3_SPWG", however this does not
lead to any actual change in regards to the functionality since the sunxi
panel driver just ignores this value. However, hopefully this clears up
any errors down the road as either the driver becomes advanced enough to
not ignore this value or that some other piece of software relies on
this value being known. PS: Apologies to the maintainers that have to
endure my misjudgement about how these things work.
As for the concerns about a single patch series, I wasn't sure where to
send the patches as they clearly aren't dt-bindings related and my
previous patches have ended up in drm-misc-fixes anyway. So I'm guessing
I'll be fine if I just post them in the list from last time???
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011212731.77763-1-pavlica.nikola@gmail.com
Add helper function to convert DT "data-mapping" property string value
into media bus format value, and deduplicate the code in panel-lvds.c
and lvds-codec.c .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012224252.29185-1-marex@denx.de
The "label" pointer is used for debug output. The code assumes that it
is either NULL or valid, but it is never set to NULL. It is either
valid or uninitialized.
Fixes: 0c275c3017 ("drm/bridge: Add bridge driver for display connectors")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013080825.GE6010@kili
Add compatible and timings for the Innolux G070Y2-T02 panel. It is 7"
WVGA (800x480) TFT LCD panel with TTL interface and a backlight unit.
Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014095202.16716-2-o.rempel@pengutronix.de
DKL_TX_LOADGEN_SHARING_PMD_DISABLE doesn't even seem to exist,
also the spec says to skip all loadgen stuff.
The code was dead anyway since it wasn't actually writing the value
anywhere.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The snb+ pcode mailbox code is not sideband, so split it out to a
separate file. As can be seen from the #include changes, very few places
use both sideband and pcode.
Code movement only.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/185deb18eb739e5ae019e27834b9997dcc1347bc.1634207064.git.jani.nikula@intel.com
For the time being, neither the power sequencer nor the backlight code
properly support two eDP panels simultaneously. While the software
states will be independent, the same sets of registers will be used for
both eDP panels, clobbering the hardware state and leading to errors.
Gracefully disable dual eDP until proper support has been added.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005175636.24669-1-jani.nikula@intel.com
Add 2 drm_connector privacy-screen helper functions:
1. drm_connector_attach_privacy_screen_provider(), this function creates
and attaches the standard privacy-screen properties and registers a
generic notifier for generating sysfs-connector-status-events on external
changes to the privacy-screen status.
2. drm_connector_update_privacy_screen(), update the privacy-screen's
sw_state if the connector has a privacy-screen.
Changes in v2:
- Do not update connector->state->privacy_screen_sw_state on
atomic-commits.
- Change drm_connector_update_privacy_screen() to take drm_connector_state
as argument instead of a full drm_atomic_state. This allows the helper
to be called by drivers when they are enabling crtcs/encoders/connectors.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-6-hdegoede@redhat.com
Add support for privacy-screen consumers to register a notifier to
be notified of external (e.g. done by the hw itself on a hotkey press)
state changes.
Changes in v2:
- Drop WARN_ON(mutex_is_locked(&priv->lock)) check in
drm_privacy_screen_call_notifier_chain() it may be locked by
another thread, which would lead to a false-positive triggering
of the check
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-5-hdegoede@redhat.com
Add X86 specific arch init code, which fills the privacy-screen lookup
table by checking for various vendor specific ACPI interfaces for
controlling the privacy-screen.
This initial version only checks for the Lenovo Thinkpad specific ACPI
methods for privacy-screen control.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-4-hdegoede@redhat.com
On some new laptops the LCD panel has a builtin electronic privacy-screen.
We want to export this functionality as a property on the drm connector
object. But often this functionality is not exposed on the GPU but on some
other (ACPI) device.
This commit adds a privacy-screen class allowing the driver for these
other devices to register themselves as a privacy-screen provider; and
allowing the drm/kms code to get a privacy-screen provider associated
with a specific GPU/connector combo.
Changes in v2:
- Make CONFIG_DRM_PRIVACY_SCREEN a bool which controls if the drm_privacy
code gets built as part of the main drm module rather then making it
a tristate which builds its own module.
- Add a #if IS_ENABLED(CONFIG_DRM_PRIVACY_SCREEN) check to
drm_privacy_screen_consumer.h and define stubs when the check fails.
Together these 2 changes fix several dependency issues.
- Remove module related code now that this is part of the main drm.ko
- Use drm_class as class for the privacy-screen devices instead of
adding a separate class for this
Changes in v3:
- Make the static inline drm_privacy_screen_get_state() stub set sw_state
and hw_state to PRIVACY_SCREEN_DISABLED to squelch an uninitialized
variable warning when CONFIG_DRM_PRIVICAY_SCREEN is not set
Changes in v4:
- Make drm_privacy_screen_set_sw_state() skip calling out to the hw if
hw_state == new_sw_state
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-3-hdegoede@redhat.com
Add support for generic electronic privacy screen properties, that
can be added by systems that have an integrated EPS.
Changes in v2 (Hans de Goede)
- Create 2 properties, "privacy-screen sw-state" and
"privacy-screen hw-state", to deal with devices where the OS might be
locked out of making state changes
- Write kerneldoc explaining how the 2 properties work together, what
happens when changes to the state are made outside of the DRM code's
control, etc.
Changes in v3 (Hans de Goede)
- Some small tweaks to the kerneldoc describing the 2 properties
Changes in v4 (Hans de Goede)
- Change the "Enabled, locked" and "Disabled, locked" hw-state enum value
names to "Enabled-locked" and "Disabled-locked". The xrandr command shows
all possible enum values separated by commas in its output, so having a
comma in an enum name is not a good idea.
- Do not add a privacy_screen_hw_state member to drm_connector_state
since this property is immutable its value must be directly stored in the
obj->properties->values array
Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-2-hdegoede@redhat.com
The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].
Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com
Missed a few asics.
v2: update comment
Fixes: 82d05736c4 ("drm/amdgpu/amdgpu_psp: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VEGA20 is 11.0.2, but it's handled by powerplay, not
swsmu.
Fixes: a8967967f6 ("drm/amdgpu/amdgpu_smu: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When creating unregistered new svm range to recover retry fault, avoid
new svm range to overlap with ranges or userptr ranges managed by TTM,
otherwise svm migration will trigger TTM or userptr eviction, to evict
user queues unexpectedly.
Change helper amdgpu_ttm_tt_affect_userptr to return userptr which is
inside the range. Add helper svm_range_check_vm_userptr to scan all
userptr of the vm, and return overlap userptr bo start, last.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.
Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missed in the conversion to IP version checking.
Fixes: af3b89d3a6 ("drm/amdgpu/smu11.0: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When IOMMU disabled in sbios and kfd in iommuv2 path,
IOMMU resume failure blocks system resume. Don't allow kfd to
use iommu v2 when iommu is disabled.
Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When IOMMU disabled in sbios and kfd in iommuv2 path, iommuv2
init will fail. But this failure should not block amdgpu driver init.
Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
migrate_vma_setup may return cpages 0, means 0 page can be migrated,
treat this as error case to skip the rest of vma migration steps.
Change svm_migrate_vma_to_vram and svm_migrate_vma_to_ram to return the
number of pages migrated successfully or error code. The caller add up
all the successful migration pages and update prange->actual_loc only if
the total migrated pages is not 0.
This also removes the warning message "VRAM BO missing during
validation" if migration cpages is 0.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No function change, use pr_debug_ratelimited to avoid per page debug
message overflowing dmesg buf and console log.
use dev_err to show error message from unexpected situation, to provide
clue to help debug without enabling dynamic debug log. Define dev_fmt to
output function name in error message.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when smu->adev->pm.ac_power == 0, message parameter with bit 16 set is saved
to smu->current_power_limit.
Fixes: 0cb4c62125 ("drm/amd/pm: correct power limit setting for SMU V11)"
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode2 reset, the GPU is temporarily removed from the
mgpu_info list. As a result, page retirement fails because it
cannot find the GPU in the GPU list.
To fix this, create our own list of GPUs that support MCE notifier
based page retirement and use that list to check if the UMC error
occurred on a GPU that supports MCE notifier based page retirement.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the missing call to re-enable RAS error injections on the Aldebaran
mode2 reset code path.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When system boots in headless mode, connecting a 4k display creates a
null pointer dereference due to hubp for a certain plane being null.
Add a condition to check for null hubp before dereferencing it.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE legacy optimization path isn't well tested under new DC optimization
flow which can result in underflow occuring when initializing X11 on
Carrizo.
[How]
Retain the legacy optimization flow for DCE and keep the new one for DCN
to satisfy optimizations being correctly applied for ASIC that can
support it.
Fixes: 34316c1e56 ("drm/amd/display: Optimize bandwidth on following fast update")
Reported-by: Tom St Denis <tom.stdenis@amd.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For optimal power savings on panels that can support it.
This was previously left disabled by default because of issues with
compositors that do not pageflip and scan out directly to the
frontbuffer.
For these compositors we now have detection methods that wait for x
number of pageflips after a full update - triggered by a buffer or
format change typically.
This may introduce bugs or new cases not tested by users so this is
only currently targeting newer DCN.
[How]
Add code in DM to set PSR state by default for newer DCN while falling
back to the feature mask for older.
Add a global debug flag that can be set to disable it for either.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display support for cyan skillfish is ready now. Enable it!
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current logic checks whether the cursor plane blending
properties match the primary plane's. However that's wrong,
because the cursor is painted on all planes underneath. If
the cursor is over the primary plane and the overlay plane,
it's painted on both pipes.
Iterate over the CRTC planes and check their scaling match
the cursor's.
v4: fix typo in commit message (Harry)
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_range_list svms declaration removed to avoid werror when
CONFIG_HSA_AMD_SVM is not enabled.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export svm_range_list_lock_and_flush_work to make other kfd parts be
able to sync svm_range_list.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Avoid conflict with address ranges mapped by SVM
mechanism that try to be allocated again through
ioctl_alloc in the same process. And viceversa.
[How]
For ioctl_alloc_memory_of_gpu allocations
Check if the address range passed into ioctl memory
alloc does not exist already in the kfd_process
svms->objects interval tree.
For SVM allocations
Look for the address range into the interval tree VA from
the VM inside of each pdds used in a kfd_process.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's used internally by firmware. Using it in the driver
could conflict with firmware.
v2: squash in fix for navi1x (Alex)
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If drm_modeset_lock() returns -EDEADLK, the caller is supposed to drop
all currently held locks using drm_modeset_backoff(). Failing to do so
will result in warnings and backtraces on the paths trying to lock a
contended lock. Add support for optionally printing the backtrace on the
path that hit the deadlock and didn't gracefully handle the situation.
For example, the patch [1] inadvertently dropped the return value check
and error return on replacing calc_watermark_data() with
intel_compute_global_watermarks(). The backtraces on the subsequent
locking paths hitting WARN_ON(ctx->contended) were unhelpful, but adding
the backtrace to the deadlock path produced this helpful printout:
<7> [98.002465] drm_modeset_lock attempting to lock a contended lock without backoff:
drm_modeset_lock+0x107/0x130
drm_atomic_get_plane_state+0x76/0x150
skl_compute_wm+0x251d/0x2b20 [i915]
intel_atomic_check+0x1942/0x29e0 [i915]
drm_atomic_check_only+0x554/0x910
drm_atomic_nonblocking_commit+0xe/0x50
drm_mode_atomic_ioctl+0x8c2/0xab0
drm_ioctl_kernel+0xac/0x140
Add new CONFIG_DRM_DEBUG_MODESET_LOCK to enable modeset lock debugging
with stack depot and trace.
[1] https://lore.kernel.org/r/20210924114741.15940-4-jani.nikula@intel.com
v2:
- default y if DEBUG_WW_MUTEX_SLOWPATH (Daniel)
- depends on DEBUG_KERNEL
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001091444.8177-1-jani.nikula@intel.com
As per the comment on top of acpi_evaluate_dsm():
| * Evaluate device's _DSM method with specified GUID, revision id and
| * function number. Caller needs to free the returned object.
We should free the returned object of acpi_evaluate_dsm() to avoid memory
leakage. Otherwise the kmemleak splat will be triggered at boot time (if we
compile kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE=y).
Fixes: 8e55f99c51 ("drm/i915: Invoke another _DSM to enable MUX on HP Workstation laptops")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906033541.862-1-yuzenghui@huawei.com
(cherry picked from commit 149ac2e7ae)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Set number of engines before attempting to create contexts so the
function free_engines can clean up properly. Also check return of
alloc_engines for NULL.
v2:
(Tvrtko)
- Send as stand alone patch
(John Harrison)
- Check for alloc_engines returning NULL
v3:
(Checkpatch / Tvrtko)
- Remove braces around single line if statement
Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: d4433c7600 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001155825.6762-1-matthew.brost@intel.com
(cherry picked from commit 84edf53776)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU,
even when LVDS outputs are not used. For this reason, the rcar-lvds
driver probes successfully on those platforms even if no further bridge
or panel is connected to the LVDS output, in order to provide the
rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU
driver.
If an LVDS output isn't connected, trying to create a DRM connector for
the output will fail. Fix this by skipping connector creation in that
case, and also skip creation of the DRM encoder as there's no point in
an encoder without a connector.
Fixes: e9e056949c ("drm: rcar-du: lvds: Convert to DRM panel bridge helper")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
(cherry picked from commit 187502afe8)
Signed-off-by: Dave Airlie <airlied@redhat.com>
The I915_TILING_* definitions in the uapi header are intended solely for
tiling modes that are visible to the old de-tiling fence ioctls. Since
modern hardware does not support de-tiling fences, we should not add new
definitions for new tiling types going forward. However we do want the
client blit selftest to eventually cover other new tiling modes (such as
Tile4), so switch it to using its own enum of tiling modes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001005816.73330-1-matthew.d.roper@intel.com
Fixes a compilation issue introduced because I forgot to test with WERROR
enabled.
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: DRI <dri-devel@lists.freedesktop.org>
Cc: nouveau@lists.freedesktop.org
Fixes: 404046cf48 ("drm/nouveau/mmu/gp100-: drop unneeded assignment in the if condition.")
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012133334.1737918-1-kherbst@redhat.com
Need to resync drm-intel-next with TTM and PXP stuff from
drm-intel-gt-next that is now in drm/drm-next.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We are currently using tsc_khz as a fallback so add the right include.
For other architectures we may need to add a different fallback, but
this is not being used by dgfx so we may as well just paper it over.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007233212.3896460-2-lucas.demarchi@intel.com
If a bridge doesn't do any bus format handling MEDIA_BUS_FMT_FIXED is
returned. Fallback to a reasonable default (MEDIA_BUS_FMT_RGB888_1X24) in
that case.
This unbreaks e.g. using mxsfb with the nwl bridge and mipi dsi panels.
Reported-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/781f0352052cc50c823c199ef5f53c84902d0580.1633959458.git.agx@sigxcpu.org
media-bus-formats.h has them in hexadecimal as well so matching with
that file saves one conversion when debugging.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c84b34855abbb85cd25bbb5126db302f88327640.1633959458.git.agx@sigxcpu.org
Components further up in the chain might ask us for supported formats.
Without this MEDIA_BUS_FMT_FIXED is assumed which then breaks display
output with mxsfb since it can't determine a proper bus format.
We handle the bus formats that correspond to the DSI formats the bridge
can potentially output (see chapter 13.6 of the i.MX 8MQ reference
manual) - which matches what xsfb can input.
Fixes: b776b0f00f ("drm: mxsfb: Use bus_format from the nearest bridge if present")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1712f2b952694fd4484dfd8576fbc5b4d7adf042.1633959458.git.agx@sigxcpu.org
The 128b/132b channel coding link training uses more straightforward TX
FFE preset values. Reuse voltage tries and max vswing for retry logic.
The delays for 128b/132b are still all wrong, but this is regardless a
step forward.
v2: Fix UHBR rate checks, use intel_dp_is_uhbr() helper
v3:
- Rebase
- Modify intel_dp_adjust_request_changed() and
intel_dp_link_max_vswing_reached() to take 128b/132b into
account. (Ville)
v4:
- Train request printing for TX FFE (Ville)
- Log 8b/10b vs. 128b/132b (Ville)
- Add helper for per-lane max vswing / tx ffe (Ville)
- Name functions with tx_ffe/vswing instead of 128b132b/8b10b
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011182144.22074-2-jani.nikula@intel.com
Add per-lane abstraction for max vswing reached to make follow-up
cleaner, as this one reverses the conditions.
v2: both conditions need to be true, reverse (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011182144.22074-1-jani.nikula@intel.com
* Fix a new crash on dev file close if the dev file was opened when
GPU is not loaded (such as missing fw in initrd)
* Switch to single drm_sched_entity per priority level per drm_file
to unbreak multi-context userspace
* Serialize GMU access to fix GMU OOB errors
* Various error path fixes
* A couple integer overflow fixes
* Fix mdp5 cursor plane WARNs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtD4u7yyiy+BQLmibUCbn=AdDRu7FrmdViHVx0QrcGf8g@mail.gmail.com
This disables a lock which wasn't enabled and it does not disable
the first lock in the array.
Fixes: 6e0eb52eba ("drm/msm/dsi: Parse bus clocks from a list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211001123409.GG2283@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Return an error code if msm_dsi_manager_validate_current_config().
Don't return success.
Fixes: 8b03ad30e3 ("drm/msm/dsi: Use one connector for dual DSI mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211001123308.GF2283@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The downstream driver models this PLL lock check as an if-elseif-else.
The only way to reach the else case where pll_locked=true [1] is by
succeeding both readl_poll_timeout_atomic calls (which return zero on
success) in the if _and_ elseif condition. Hence both the "lock" and
"ready" bit need to be tested in the SM_READY_STATUS register before
considering the PLL locked and ready to go.
Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630).
[1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302
Fixes: f079f6d999 ("drm/msm/dsi: Add PHY/PLL for 8x96")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The commit 9f91f22aaf ("drm/msm/dsi: remove duplicate fields from
dsi_pll_Nnm instances") mistakenly changed registered clock names. While
the platform is in progress of migration to using clock properties in
the dts rather than the global clock names, we should provide backwards
compatibility. Thus restore registerd global clock names.
Fixes: 9f91f22aaf ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210921162245.1858118-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Both PINGPONG4 and PINGPONG5 IRQ registers are using the
same address, which is incorrect. PINGPONG4 should use the
register offset 30, and PINGPONG5 should use the register
offset 31 according to the downstream driver.
Fixes: 667e9985ee ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210819133636.2045766-1-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since commit 98659487b8 ("drm/msm: add support to take dpu snapshot")
the following NULL pointer dereference is seen on i.MX53:
[ 3.275493] msm msm: bound 30000000.gpu (ops a3xx_ops)
[ 3.287174] [drm] Initialized msm 1.8.0 20130625 for msm on minor 0
[ 3.293915] 8<--- cut here ---
[ 3.297012] Unable to handle kernel NULL pointer dereference at virtual address 00000028
[ 3.305244] pgd = (ptrval)
[ 3.307989] [00000028] *pgd=00000000
[ 3.311624] Internal error: Oops: 805 [#1] SMP ARM
[ 3.316430] Modules linked in:
[ 3.319503] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+g682d702b426b #1
[ 3.326652] Hardware name: Freescale i.MX53 (Device Tree Support)
[ 3.332754] PC is at __mutex_init+0x14/0x54
[ 3.336969] LR is at msm_disp_snapshot_init+0x24/0xa0
i.MX53 does not use the DPU controller.
Fix the problem by only calling msm_disp_snapshot_init() on platforms that
use the DPU controller.
Cc: stable@vger.kernel.org
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210914174831.2044420-1-festevam@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
These error paths returned 1 on failure, instead of a negative error
code. This would lead to an Oops in the caller. A second problem is
that the check for "if (ret != -ENODATA)" did not work because "ret" was
set to 1.
Fixes: 5785dd7a8e ("drm/msm: Fix duplicate gpu node in icc summary")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001125904.GK2283@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
This code returns 1 on error instead of a negative error. It leads to
an Oops in the caller. A second problem is that the check for
"if (ret != -ENODATA)" cannot be true because "ret" is set to 1.
Fixes: 5785dd7a8e ("drm/msm: Fix duplicate gpu node in icc summary")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001125759.GJ2283@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
The initialization of pointer dev dereferences pointer edp before
edp is null checked, so there is a potential null pointer deference
issue. Fix this by only dereferencing edp after edp has been null
checked.
Addresses-Coverity: ("Dereference before null check")
Fixes: ab5b0107cc ("drm/msm: Initial add eDP support in msm drm driver (v5)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210929121857.213922-1-colin.king@canonical.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The return type of ktime_divns() is s64. The timeout_to_jiffies() currently
assigns the result of this ktime_divns() to unsigned long, which on 32 bit
systems may overflow. Furthermore, the result of this function is sometimes
also passed to functions which expect signed long, dma_fence_wait_timeout()
is one such example.
Fix this by adjusting the type of remaining_jiffies to s64, so we do not
suffer overflow there, and return a value limited to range of 0..INT_MAX,
which is safe for all usecases of this timeout.
The above overflow can be triggered if userspace passes in too large timeout
value, larger than INT_MAX / HZ seconds. The kernel detects it and complains
about "schedule_timeout: wrong timeout value %lx" and generates a warning
backtrace.
Note that this fixes commit 6cedb8b377 ("drm/msm: avoid using 'timespec'"),
because the previously used timespec_to_jiffies() function returned unsigned
long instead of s64:
static inline unsigned long timespec_to_jiffies(const struct timespec *value)
Fixes: 6cedb8b377 ("drm/msm: avoid using 'timespec'")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: stable@vger.kernel.org # 5.6+
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210917005913.157379-1-marex@denx.de
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is no devfreq on a3xx at the moment since gpu_busy is not
implemented. This means that msm_devfreq_init() will return early
and the entire devfreq setup is skipped.
However, msm_devfreq_active() and msm_devfreq_idle() are still called
unconditionally later, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
Internal error: Oops: 96000004 [#1] PREEMPT SMP
CPU: 0 PID: 133 Comm: ring0 Not tainted 5.15.0-rc1 #4
Hardware name: Longcheer L8150 (DT)
pc : mutex_lock_io+0x2bc/0x2f0
lr : msm_devfreq_active+0x3c/0xe0 [msm]
Call trace:
mutex_lock_io+0x2bc/0x2f0
msm_gpu_submit+0x164/0x180 [msm]
msm_job_run+0x54/0xe0 [msm]
drm_sched_main+0x2b0/0x4a0 [gpu_sched]
kthread+0x154/0x160
ret_from_fork+0x10/0x20
Fix this by adding a check in msm_devfreq_active/idle() which ensures
that devfreq was actually initialized earlier.
Fixes: 9bc9557017 ("drm/msm: Devfreq tuning")
Reported-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210913164556.16284-1-stephan@gerhold.net
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently there is audio not working problem after system resume from suspend
if hdmi monitor stay plugged in at DUT. However this problem does not happen
at normal operation but at a particular test case. The root cause is DP driver
signal audio with connected state at resume which trigger audio trying to setup
audio data path through DP main link but failed due to display port is not setup
and enabled by upper layer framework yet. This patch only have DP driver signal
audio only when DP is in disconnected state so that audio option shows correct
state after system resume. DP driver will not signal audio with connected state
until display enabled executed by upper layer framework where display port is
setup completed and main link is running.
Changes in V2:
-- add details commit text
Fixes: afc9b8b6ba ("drm/msm/dp: signal audio plugged change at dp_pm_resume")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1632932224-25102-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
This reverts commit f4be17cd5b.
Commit c1ec54b7b5
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:
WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0
So revert that patch and all the patches depend on that patch.
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This reverts commit 8cdcb36534.
Commit c1ec54b7b5
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:
WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0
So revert that patch and all the patches depend on that patch.
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This reverts commit bc9241be73.
Commit c1ec54b7b5
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:
WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0
So revert that patch and all the patches depend on that patch.
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This reverts commit 9efb16c2fd.
Commit c1ec54b7b5
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:
WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0
So revert that patch and all the patches depend on that patch.
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The copy_to/from_user() function returns the number of bytes remaining
to be copied, but we want to return -EFAULT on error.
Fixes: e4165ae830 ("drm/v3d: add multiple syncobjs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011123303.GA14314@kili
Clean up all of the kernel-doc issues in drm_connector.c:
drivers/gpu/drm/drm_connector.c:2611: warning: Excess function parameter 'connector' description in 'drm_connector_oob_hotplug_event'
drivers/gpu/drm/drm_connector.c:2611: warning: Function parameter or member 'connector_fwnode' not described in 'drm_connector_oob_hotplug_event'
drm_connector.c:630: warning: No description found for return value of 'drm_get_connector_status_name'
drm_connector.c:715: warning: No description found for return value of 'drm_connector_list_iter_next'
drm_connector.c:785: warning: No description found for return value of 'drm_get_subpixel_order_name'
drm_connector.c:816: warning: No description found for return value of 'drm_display_info_set_bus_formats'
drm_connector.c:1331: warning: No description found for return value of 'drm_mode_create_dvi_i_properties'
drm_connector.c:1412: warning: No description found for return value of 'drm_connector_attach_content_type_property'
drm_connector.c:1492: warning: No description found for return value of 'drm_mode_create_tv_margin_properties'
drm_connector.c:1534: warning: No description found for return value of 'drm_mode_create_tv_properties'
drm_connector.c:1627: warning: No description found for return value of 'drm_mode_create_scaling_mode_property'
drm_connector.c:1944: warning: No description found for return value of 'drm_mode_create_suggested_offset_properties'
drm_connector.c:2315: warning: missing initial short description on line:
* drm_connector_set_panel_orientation_with_quirk -
[The last warning listed is probably a quirk/bug in scripts/kernel-doc.]
Fixes: 613051dac4 ("drm: locking&new iterators for connector_list")
Fixes: 5221719517 ("drm: Extract drm_connector.[hc]")
Fixes: b3c6c8bfe3 ("drm: document drm_display_info")
Fixes: 50525c332b ("drm: content-type property for HDMI connector")
Fixes: 6c4f52dca3 ("drm/connector: Allow creation of margin props alone")
Fixes: 69654c632d ("drm/connector: Split out orientation quirk detection (v2)")
Fixes: 72ad49682d ("drm/connector: Add support for out-of-band hotplug notification (v3)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211010224459.3603-1-rdunlap@infradead.org
Up to now s6e63m0_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011132754.2479853-2-u.kleine-koenig@pengutronix.de
Seems to fix some object-debug splat which appeared while debugging
something unrelated.
v2: s/guc_blocked/guc_state.blocked/
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Link: https://patchwork.freedesktop.org/patch/msgid/20210924144646.4096402-1-matthew.auld@intel.com
(cherry picked from commit d576b31bde)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It's used internally by firmware. Using it in the driver
could conflict with firmware.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/nouveau/nouveau_bo.c: In function ‘nouveau_ttm_tt_populate’:
drivers/gpu/drm/nouveau/nouveau_bo.c:1228:17: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/nouveau/nouveau_bo.c: In function ‘nouveau_ttm_tt_unpopulate’:
drivers/gpu/drm/nouveau/nouveau_bo.c:1252:17: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable]
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jeremy Kolb <jkolb@brandeis.edu>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-8-lee.jones@linaro.org
In order to keep the code style consistency of the whole file,
the 'inst' assignments should be deleted.
The clang_analyzer complains as follows:
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c:499:8: warning:
Although the value storedto 'inst' is used in the enclosing expression,
the value is never actually read from 'inst'.
Karol: Removed unneeded brackets.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Luo penghao <luo.penghao@zte.com.cn>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210821021447.27097-1-luo.penghao@zte.com.cn
In order to keep the code style consistency of the whole file,
the 'ret' assignments should be deleted.
The clang_analyzer complains as follows:
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/uvmm.c:317:8⚠️
Although the value storedto 'ret' is used in the enclosing expression,
the value is never actually read from 'ret'.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Luo penghao <luo.penghao@zte.com.cn>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210821021106.27010-1-luo.penghao@zte.com.cn
'priv.h' included in 'base.c' is duplicated.
Remove all but the first include of priv.h from base.c.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: yong yiran <yong.yiran@zte.com.cn>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210807032054.642867-1-yong.yiran@zte.com.cn
UAPI Changes:
- Add uAPI for using PXP protected objects
Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8064
- Add PCI IDs and LMEM discovery/placement uAPI for DG1
Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584
- Disable engine bonding on Gen12+ except TGL, RKL and ADL-S
Cross-subsystem Changes:
- Merges 'tip/locking/wwmutex' branch (core kernel tip)
- "mei: pxp: export pavp client to me client bus"
Core Changes:
- Update ttm_move_memcpy for async use (Thomas)
Driver Changes:
- Enable GuC submission by default on DG1 (Matt B)
- Add PXP (Protected Xe Path) support for Gen12 integrated (Daniele,
Sean, Anshuman)
See "drm/i915/pxp: add PXP documentation" for details!
- Remove force_probe protection for ADL-S (Raviteja)
- Add base support for XeHP/XeHP SDV (Matt R, Stuart, Lucas)
- Handle DRI_PRIME=1 on Intel igfx + Intel dgfx hybrid graphics setup (Tvrtko)
- Use Transparent Hugepages when IOMMU is enabled (Tvrtko, Chris)
- Implement LMEM backup and restore for suspend / resume (Thomas)
- Report INSTDONE_GEOM values in error state for DG2 (Matt R)
- Add DG2-specific shadow register table (Matt R)
- Update Gen11/Gen12/XeHP shadow register tables (Matt R)
- Maintain backward-compatible nested batch behavior on TGL+ (Matt R)
- Add new LRI reg offsets for DG2 (Akeem)
- Initialize unused MOCS entries to device specific values (Ayaz)
- Track and use the correct UC MOCS index on Gen12 (Ayaz)
- Add separate MOCS table for Gen12 devices other than TGL/RKL (Ayaz)
- Simplify the locking and eliminate some RCU usage (Daniel)
- Add some flushing for the 64K GTT path (Matt A)
- Mark GPU wedging on driver unregister unrecoverable (Janusz)
- Major rework in the GuC codebase, simplify locking and add docs (Matt B)
- Add DG1 GuC/HuC firmwares (Daniele, Matt B)
- Remember to call i915_sw_fence_fini on guc_state.blocked (Matt A)
- Use "gt" forcewake domain name for error messages instead of "blitter" (Matt R)
- Drop now duplicate LMEM uAPI RFC kerneldoc section (Daniel)
- Fix early tracepoints for requests (Matt A)
- Use locked access to ctx->engines in set_priority (Daniel)
- Convert gen6/gen7/gen8 read operations to fwtable (Matt R)
- Drop gen11/gen12 specific mmio write handlers (Matt R)
- Drop gen11 specific mmio read handlers (Matt R)
- Use designated initializers for init/exit table (Kees)
- Fix syncmap memory leak (Matt B)
- Add pretty printing for buddy allocator state debug (Matt A)
- Fix potential error pointer dereference in pinned_context() (Dan)
- Remove IS_ACTIVE macro (Lucas)
- Static code checker fixes (Nathan)
- Clean up disabled warnings (Nathan)
- Increase timeout in i915_gem_contexts selftests 5x for GuC submission (Matt B)
- Ensure wa_init_finish() is called for ctx workaround list (Matt R)
- Initialize L3CC table in mocs init (Sreedhar, Ayaz, Ram)
- Get PM ref before accessing HW register (Vinay)
- Move __i915_gem_free_object to ttm_bo_destroy (Maarten)
- Deduplicate frequency dump on debugfs (Lucas)
- Make wa list per-gt (Venkata)
- Do not define dummy vma in stack (Venkata)
- Take pinning into account in __i915_gem_object_is_lmem (Matt B, Thomas)
- Do not report currently active engine when describing objects (Tvrtko)
- Fix pdfdocs build error by removing nested grid from GuC docs (Akira)
- Remove false warning from the rps worker (Tejas)
- Flush buffer pools on driver remove (Janusz)
- Fix runtime pm handling in i915_gem_shrink (Maarten)
- Rework TTM object initialization slightly (Thomas)
- Use fixed offset for PTEs location (Michal Wa)
- Verify result from CTB (de)register action and improve error messages (Michal Wa)
- Fix bug in user proto-context creation that leaked contexts (Matt B)
- Re-use Gen11 forcewake read functions on Gen12 (Matt R)
- Make shadow tables range-based (Matt R)
- Ditch the i915_gem_ww_ctx loop member (Thomas, Maarten)
- Use NULL instead of 0 where appropriate (Ville)
- Rename pci/debugfs functions to respect file prefix (Jani, Lucas)
- Drop guc_communication_enabled (Daniele)
- Selftest fixes (Thomas, Daniel, Matt A, Maarten)
- Clean up inconsistent indenting (Colin)
- Use direction definition DMA_BIDIRECTIONAL instead of
PCI_DMA_BIDIRECTIONAL (Cai)
- Add "intel_" as prefix in set_mocs_index() (Ayaz)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWAO80MB2eyToYoy@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
- fbdev/efifb: Release PCI device's runtime PM ref during FB destr\
oy (Imre)
i915 Core Driver Changes:
- Only access SFC_DONE in media when not fused off for graphics 12 and newer.
- Double Memory latency values from pcode for DG2 (Matt Roper)
- ADL-S PCI ID update (Tejas)
- New DG1 PCI ID (Jose)
- Fix regression with uncore refactoring (Dave)
i915 Display Changes:
- ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita)
- DG2 display fixes (Ankit, Jani)
- Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman)
- General display simplifications and clean-ups (Jani, Swati, Jose, Ville)
- PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong)
- Nuke ORIGIN_GTT (Jose)
- Return proper DPRX link training result (Lee)
- FBC related refactor and fixes (Ville)
- Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng)
- DP 2.0 preparation work (Jani)
- Silence __iomem sparse warn (Ville)
- Clean up DPLL stuff (Ville)
- Fix various dp/edp max rates (Matt Atwood, Animesh, Jani)
- Remove VBT ddi_port_info caching (Jani)
- DSI driver improvements (Lee)
- HDCP fixes (Juston)
- Associate ACPI connector nodes with connector entries (Heikki)
- Add support for out-of-bound hotplug events (Hans)
- VESA vendor block and drm/i915 MSO use of it (Jani)
- Fixes for bigjoiner (Ville)
- Update memory bandwidth parameters (RK)
- DMC related fixes (Chris, Jose)
- HDR related fixes and improvements (Tejas)
- g4x/vlv/chv CxSR/wm fixes/cleanups (Ville)
- Use BIOS provided value for RKL Audio's HDA link (Kai-Heng)
- Fix the dsc check while selecting min_cdclk (Vandita)
- Split and constify vtable (Dave)
- Add ww context to intel_dpt_pin (Maarten)
- Fix bdb version check (Lukasz)
- DP per-lane drive settings prep work and other DP fixes (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmFbTsgACgkQ+mJfZA7r
E8onwQf/QLOtlY0Al7oVEQrWu7I6vzajyQz6oGbj3rTNMG6m/sDNCgKZaNmxRnQo
O+YjccMW/dnsFhSqckm8JzQUrHPSmDExBu+HGSkxNTod7UYVEEd0MYETnBShF4hv
vwoPgRuzny5+jEDuBv9GBD/6d2su9Hl/OWTQ/YPjdJKyIWLjKhbxET7FExlV6MtG
I80OyJSaV2L4EAgPT5TBSAXvzeUFAevw2O9aOSI+rTtAOfXI7TkB7E38Tjzc7uSd
YN9/43NXoJYVB9yhVXKJgK90COMSREFv/lUupSXqN/W5lOD4xLg0W6vD6kKX5Z4T
IrfvR6T5Cz+OfwSLUlzmWeO+l9VcqQ==
=9tCx
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2021-10-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
- fbdev/efifb: Release PCI device's runtime PM ref during FB destr\
oy (Imre)
i915 Core Driver Changes:
- Only access SFC_DONE in media when not fused off for graphics 12 and newer.
- Double Memory latency values from pcode for DG2 (Matt Roper)
- ADL-S PCI ID update (Tejas)
- New DG1 PCI ID (Jose)
- Fix regression with uncore refactoring (Dave)
i915 Display Changes:
- ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita)
- DG2 display fixes (Ankit, Jani)
- Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman)
- General display simplifications and clean-ups (Jani, Swati, Jose, Ville)
- PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong)
- Nuke ORIGIN_GTT (Jose)
- Return proper DPRX link training result (Lee)
- FBC related refactor and fixes (Ville)
- Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng)
- DP 2.0 preparation work (Jani)
- Silence __iomem sparse warn (Ville)
- Clean up DPLL stuff (Ville)
- Fix various dp/edp max rates (Matt Atwood, Animesh, Jani)
- Remove VBT ddi_port_info caching (Jani)
- DSI driver improvements (Lee)
- HDCP fixes (Juston)
- Associate ACPI connector nodes with connector entries (Heikki)
- Add support for out-of-bound hotplug events (Hans)
- VESA vendor block and drm/i915 MSO use of it (Jani)
- Fixes for bigjoiner (Ville)
- Update memory bandwidth parameters (RK)
- DMC related fixes (Chris, Jose)
- HDR related fixes and improvements (Tejas)
- g4x/vlv/chv CxSR/wm fixes/cleanups (Ville)
- Use BIOS provided value for RKL Audio's HDA link (Kai-Heng)
- Fix the dsc check while selecting min_cdclk (Vandita)
- Split and constify vtable (Dave)
- Add ww context to intel_dpt_pin (Maarten)
- Fix bdb version check (Lukasz)
- DP per-lane drive settings prep work and other DP fixes (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 05 Oct 2021 04:58:16 AEST
# gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YVtPk6llsxBFiw7W@intel.com
UAPI Changes:
- Allow empty drm leases for creating separate GEM namespaces.
Cross-subsystem Changes:
- Slightly rework dma_buf_poll.
- Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
the lockless dma-resv functions.
Core Changes:
- Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
- Add more DP2 headers.
- fix CONFIG_FB dependency in fb_helper.
- Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
- Fix crash on a 0 or invalid EDID.
Driver Changes:
- Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
- Add mode_valid to ti-sn65dsi86 bridge.
- Support multiple syncobjs in v3d.
- Add R8, RGB332 and RGB888 pixel formats to GUD.
- Use devm_add_action_or_reset in dw-hdmi-cec.
-----BEGIN PGP SIGNATURE-----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=qxpr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.16:
UAPI Changes:
- Allow empty drm leases for creating separate GEM namespaces.
Cross-subsystem Changes:
- Slightly rework dma_buf_poll.
- Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
the lockless dma-resv functions.
Core Changes:
- Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
- Add more DP2 headers.
- fix CONFIG_FB dependency in fb_helper.
- Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
- Fix crash on a 0 or invalid EDID.
Driver Changes:
- Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
- Add mode_valid to ti-sn65dsi86 bridge.
- Support multiple syncobjs in v3d.
- Add R8, RGB332 and RGB888 pixel formats to GUD.
- Use devm_add_action_or_reset in dw-hdmi-cec.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Wed 06 Oct 2021 20:48:12 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2602f4e9-a8ac-83f8-6c2a-39fd9ca2e1ba@linux.intel.com
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-3-dmitry.baryshkov@linaro.org
Decoder input LVDS format is a property of the decoder chip or even
its strapping. Handle data-mapping the same way lvds-panel does. In
case data-mapping is not present, do nothing, since there are still
legacy bindings which do not specify this property.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211010144919.38392-2-marex@denx.de
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-3-dmitry.baryshkov@linaro.org
There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The
fix we agreed on in the end is to make this symbol selected by any
driver using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in v5.15.
There is a small merge conflict against an earlier partial fix for the
QCOM_SCM dependency problems.
Finally, the branch also includes a small unrelated build fix for NOMMU
architectures.
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=187C
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The fix we
agreed on in the end is to make this symbol selected by any driver
using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in
v5.15.
Finally, the branch also includes a small unrelated build fix for
NOMMU architectures"
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
qcom_scm: hide Kconfig symbol
firmware: include drivers/firmware/Kconfig unconditionally
Remove all but the first include of reg_helper.h and core_types.h
from dcn201_clk_mgr.c.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adev_to_drm is used everywhere, so improve recent changes
when accessing drm_device pointer from amdgpu_device.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fix the deadlock with the BO reservations during SVM_BO evictions
while allocations in VRAM are concurrently performed. More specific,
while the ttm waits for the fence to be signaled (ttm_bo_wait), it
already has the BO reserved. In parallel, the restore worker might be
running, prefetching memory to VRAM. This also requires to reserve the
BO, but blocks the mmap semaphore first. The deadlock happens when the
SVM_BO eviction worker kicks in and waits for the mmap semaphore held
in restore worker. Preventing signal the fence back, causing the
deadlock until the ttm times out.
We don't need to hold the BO reservation anymore during validation
and mapping. Now the physical addresses are taken from hmm_range_fault.
We also take migrate_mutex to prevent range migration while
validate_and_map update GPU page table.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Got Werror when building with Clang-13:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:195:2:
error: variable 'ts' is used uninitialized whenever switch default is
taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:200:9:
note: uninitialized use occurs here
return ts;
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:180:2:
note: variable 'ts' is declared here
enum dpia_set_config_ts ts;
^
1 error generated.
Fix it.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable result is being initialized with a value that is never
read, it is being updated immediately afterwards in both branches
of an if statement. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missed when converting the driver over to IP based
initialization.
Tested-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reset dsi0 HW to default when power on. This prevents to have different
settingis between the bootloader and the kernel.
As not all Mediatek boards have the reset consumer configured in their
board description, also is not needed on all of them, the reset is optional,
so the change is compatible with all boards.
Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20210930103105.v4.7.Idbb4727ddf00ba2fe796b630906baff10d994d89@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a function for checking source MST support. Drop intel_dp->can_mst
and use intel_dp->mst_mgr.cbs to indicate the same. It's the single
point of truth without additional state variables. In code, "source
support" is also self-documenting as opposed to the vague "can mst".
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006101618.22066-1-jani.nikula@intel.com
Limit the supported UHBR rates based on the repeater support, if there
are repeaters.
This should be done in DP helper level, but that requires an overhaul of
the LTTPR handling, as the max rate is not enough to represent how
128b/132b rates may be masked along the way.
Curiously, the spec says:
* Shall be cleared to 00h when operating in 8b/10b Link Layer.
* Each LTTPR on the way back to the DPTX shall clear the bits that do
not correspond to the LTTPR's current bit rate.
It's rather vague if we can reliably use the field at this time due to
the wording "operating" and "current". But it would seem bizarre to have
to wait until trying to operate a 128b/132b link layer at a certain bit
rate to figure this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007105727.18439-1-jani.nikula@intel.com
Move detach implementation from sn65dsi83_remove() to dedicated
.detach callback. There is no functional change to the code, but
that detach is now in the correct location.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907024038.871299-1-marex@denx.de
When trying to bring IS_ACTIVE to linux/kconfig.h I thought it wouldn't
provide much value just encapsulating it in a boolean context. So I also
added the support for handling undefined macros as the IS_ENABLED()
counterpart. However the feedback received from Masahiro Yamada was that
it is too ugly, not providing much value. And just wrapping in a boolean
context is too dumb - we could simply open code it.
As detailed in commit babaab2f47 ("drm/i915: Encapsulate kconfig
constant values inside boolean predicates"), the IS_ACTIVE macro was
added to workaround a compilation warning. However after checking again
our current uses of IS_ACTIVE it turned out there is only
1 case in which it triggers a warning in clang (due
-Wconstant-logical-operand) and 2 in smatch. All the others
can simply use the shorter version, without wrapping it in any macro.
So here I'm dialing all the way back to simply removing the macro. That
single case hit by clang can be changed to make the constant come first,
so it doesn't think it's mask:
- if (context && CONFIG_DRM_I915_FENCE_TIMEOUT)
+ if (CONFIG_DRM_I915_FENCE_TIMEOUT && context)
As talked with Dan Carpenter, that logic will be added in smatch as
well, so it will also stop warning about it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005171728.3147094-1-lucas.demarchi@intel.com
The UHBR check was using > instead of >=. Use the helper instead to
avoid mistakes. Also always use the non-UHBR values for HDMI.
v2: Use intel_crtc_has_dp_encoder() && intel_dp_is_uhbr() (Ville)
Fixes: 2817efaeb6 ("drm/i915/dg2: add SNPS PHY translations for UHBR link rates")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007124201.18686-1-jani.nikula@intel.com
Unify BO evicting functionality for possible memory
types in amdgpu_ttm.c.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that SCM can be a loadable module, we have to add another
dependency to avoid link failures when ipa or adreno-gpu are
built-in:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':
ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'
ld.lld: error: undefined symbol: qcom_scm_is_available
>>> referenced by adreno_gpu.c
>>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a
This can happen when CONFIG_ARCH_QCOM is disabled and we don't select
QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd
use a similar dependency here to what we have for QCOM_RPROC_COMMON,
but that causes dependency loops from other things selecting QCOM_SCM.
This appears to be an endless problem, so try something different this
time:
- CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on'
but that is simply selected by all of its users
- All the stubs in include/linux/qcom_scm.h can go away
- arm-smccc.h needs to provide a stub for __arm_smccc_smc() to
allow compile-testing QCOM_SCM on all architectures.
- To avoid a circular dependency chain involving RESET_CONTROLLER
and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement.
According to my testing this still builds fine, and the QCOM
platform selects this symbol already.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The KMS documentation doesn't say much about the meaning of each
content type. Add a reference to the specification defining them.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004091236.82010-1-contact@emersion.fr
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_update':
drivers/gpu/drm/drm_plane_helper.c:113:32: error: 'visible' is used uninitialized [-Werror=uninitialized]
113 | struct drm_plane_state plane_state = {
| ^~~~~~~~~~~
drivers/gpu/drm/drm_plane_helper.c:178:14: note: 'visible' was declared here
178 | bool visible;
| ^~~~~~~
cc1: all warnings being treated as errors
visible is an output, not an input. in practice this use might turn out
OK but it's still UB.
Fixes: df86af9133 ("drm/plane-helper: Add drm_plane_helper_check_state()")
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007063706.305984-1-alex_y_xu@yahoo.ca
As per the comment on top of acpi_evaluate_dsm():
| * Evaluate device's _DSM method with specified GUID, revision id and
| * function number. Caller needs to free the returned object.
We should free the returned object of acpi_evaluate_dsm() to avoid memory
leakage. Otherwise the kmemleak splat will be triggered at boot time (if we
compile kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE=y).
Fixes: 8e55f99c51 ("drm/i915: Invoke another _DSM to enable MUX on HP Workstation laptops")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906033541.862-1-yuzenghui@huawei.com
Extend the rcar_du_device_info structure and rcar_du_output enum to
support DSI outputs and utilise these additions to provide support for
the R8A779A0 V3U platform.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Not all platforms require both per-crtc IRQ and per-crtc clock
management. In preparation for suppporting such platforms, split the
feature macro to be able to specify both features independently.
The other features are incremented accordingly, to keep the two crtc
features adjacent.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DIDSR fields named LDCS were incorrectly defined as LCDS.
Both the Gen2 and Gen3 documentation refer to the fields as the "LVDS
Dot Clock Select".
Correct the definitions.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R-Car DU as found on the D3, E3, and V3U do not have support
for an external synchronisation method.
In these cases, the dsysr cached register should not be initialised
in DSYSR_TVM_TVSYNC, but instead should be left clear to configure as
DSYSR_TVM_MASTER by default.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Sort the DU outputs alphabetically, with the exception of the final
entry which is there as a sentinal.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The correct format specifier for size_t is %zu. Using %d (or %u)
generates a warning on 64-bit platforms. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
The driver accesses the drm_bridge.of_node field, which is present only
if CONFIG_OF is enabled. As all platforms using omapdrm are OF-based, we
can simply depend on CONFIG_OF.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On 64-bit platforms, the compiler complains that casting a void pointer
to an unsigned int loses data. Cast the pointer to a uintptr_t to fix
this.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The correct format specifier for size_t is %zu. Using %d (or %u)
generates a warning on 64-bit platforms. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
strncpy() is widely regarded as unsafe due to the fact that it may leave
the destination string without a nul-termination when the source string
size is too large. When compiling the kernel with W=1, the gcc warns
about this:
drivers/gpu/drm/drm_property.c: In function ‘drm_property_create’:
drivers/gpu/drm/drm_property.c:130:2: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
130 | strncpy(property->name, name, DRM_PROP_NAME_LEN);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There are three occurrences of strncpy() in drm_property.c. None of them
are actually unsafe, as the very next line forces nul-termination of the
destination buffer. The warning is thus a false positive, but adds noise
to the kernel log. It can easily be silenced by using strscpy_pad()
instead. Do so.
One of the three occurrences, in drm_property_add_enum(), fills a char
array that is later copied to userspace with copy_to_user() in
drm_mode_getproperty_ioctl(). To avoid leaking kernel data,
strscpy_pad() is required. Similarly, a second occurrence, in
drm_mode_getproperty_ioctl(), copies the string to an ioctl data buffer
that isn't previously zero'ed, to strscpy_pad() is also required. The
last occurrence, in drm_property_create(), would be safe to replace with
strscpy(), as the destination buffer is copied to userspace with
strscpy_pad(). However, given that this isn't in a hot path, let's avoid
future data leaks in case someone copies the whole char array blindly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On R-Car Gen3, the DU uses a separate IP core named VSP to perform DMA
from memory and composition of planes. The DU hardware then only handles
the video timings and the interface with the encoders. This differs from
Gen2, where the DU included a composer with DMA engines.
When sourcing from the VSP, the DU hardware performs no memory access,
and thus has no requirements on imported dma-buf memory types. The GEM
CMA helpers however still create a DMA mapping to the DU device, which
isn't used. The mapping to the VSP is done when processing the atomic
commits, in the plane .prepare_fb() handler.
When the system uses an IOMMU, the VSP device is attached to it, which
enables the VSP to use non physically contiguous memory. The DU, as it
performs no memory access, isn't connected to the IOMMU. The GEM CMA
drm_gem_cma_prime_import_sg_table() helper will in that case fail to map
non-contiguous imported dma-bufs, as the DMA mapping to the DU device
will have multiple entries in its sgtable. The prevents using non
physically contiguous memory for display.
The DRM PRIME and GEM CMA helpers are designed to create the sgtable
when the dma-buf is imported. By default, the device referenced by the
drm_device is used to create the dma-buf attachment. Drivers can use a
different device by using the drm_gem_prime_import_dev() function. While
the DU has access to the VSP device, this won't help here, as different
CRTCs use different VSP instances, connected to different IOMMU
channels. The driver doesn't know at import time which CRTC a GEM object
will be used, and thus can't select the right VSP device to pass to
drm_gem_prime_import_dev().
To support non-contiguous memory, implement a custom
.gem_prime_import_sg_table() operation that accepts all imported dma-buf
regardless of the number of scatterlist entries. The sgtable will be
mapped to the VSP at .prepare_fb() time, which will reject the
framebuffer if the VSP isn't connected to an IOMMU.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The DU DMA address space is limited to 32 bits, so the DMA coherent mask
should be set accordingly. The DMA mapping implementation will
transparently map high memory buffers to 32-bit addresses through an
IOMMU when present (or through bounce buffers otherwise, which isn't a
supported use case as performances would be terrible).
However, when sourcing frames from a VSP, the situation is more
complicated. The DU delegates all memory accesses to the VSP and doesn't
perform any DMA access by itself. Due to how the GEM CMA helpers are
structured buffers are still mapped to the DU device. They are later
mapped to the VSP as well to perform DMA access, through the IOMMU
connected to the VSP.
Setting the DMA coherent mask to 32 bits for the DU when using a VSP can
cause issues when importing a dma_buf. If the buffer is located above
the 32-bit address space, the DMA mapping implementation will try to map
it to the DU's DMA address space. As the DU has no IOMMU a bounce buffer
will be allocated, which in the best case will waste memory and in the
worst case will just fail.
To work around this issue, set the DMA coherent mask to the full 40-bit
address space for the DU. All dma-buf instances will be imported without
any restriction, and will be mapped to the VSP when preparing the
associated framebuffer.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Improve the debugging and error messages printing when initializing
encoders by replacing the output number by the output name, printing the
bridge OF node name, and the error code of failed operations.
While at it, move the related rcar_du_output enumeration from
rcar_du_crtc.h to rcar_du_drv.h as it's not specific to the CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU,
even when LVDS outputs are not used. For this reason, the rcar-lvds
driver probes successfully on those platforms even if no further bridge
or panel is connected to the LVDS output, in order to provide the
rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU
driver.
If an LVDS output isn't connected, trying to create a DRM connector for
the output will fail. Fix this by skipping connector creation in that
case, and also skip creation of the DRM encoder as there's no point in
an encoder without a connector.
Fixes: e9e056949c ("drm: rcar-du: lvds: Convert to DRM panel bridge helper")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
[Why]
DPALT detection for B0 PHY has its own set of RDPCSPIPE registers
[How]
Use RDPCSPIPE registers to detect if DPALT lane is 4 lane
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The existing limit was mistakenly bigger than 4k for DCN 3.1
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Overriding link setting inside override_training_settings
result in fallback link settings being ignored. This can
potentially cause link training to always fail and consequently
result in an infinite loop of link training to occur in
dp_verify_link_cap during detection.
[How]
Since preferred link settings are already considered inside
decide_link_settings, skip the check in override_training_settings
to avoid infinite link training loops.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For those video format with 60 fps, the user space player could
ask for 120Hz for playback.
[How]
Add 120 in the table of common rates.
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Aldebaran, GPU driver will handle bad page retirement
for GPU memory even though UMC is host managed. As a result,
register a bad page retirement handler on the mce notifier
chain to retire bad pages on Aldebaran.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check first if debugfs is initialized before creating
amdgpu debugfs files.
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
YELLOW_CARP_B0 address was not correct
[How]
Set YELLOW_CARP_B0 to 0x1A.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Condition variable sometimes terminated unexpectedly
[How]
Use wait_for_completion_timeout to avoid unexpected termination of CV
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. HPD callback function has deadlock problem
2. HPD status is not assigned
3. There is crash due to null pointer
4. link_enc is NULL in DPIA case
[How]
1. Fix deadlock problem by moving it out of the
drm_modeset_lock
2. Assign HPD status from the notify of outbox
from dmub FW
3. Fix the crash by checking if pin or enc exists
4. Use link_enc_cfg_get_link_enc_used_by_link to
dynamically assign
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
1. Remove unnecessary dummy interrupt source for USB4 HPD & HPD RX
2. Adjust parameter for DPCD writing of link training process of DPIA link
3. Adjust specific AUX defer delay for DPIA link
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Additional debug flags that can be useful for testing USB4 DP
link training.
Add flags:
- 0x2 : Forces USB4 DP link to non-LTTPR mode
- 0x4 : Extends status read intervals to about 60s.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIB_BE_CNTL<i>.DIG_HPD_SELECT selects the HPD block being used
by the display endpoint assigned to DIG<i>. In the case of USB4
display endpoints, no physical HPD block is assigned.
[How]
Setting DIB_BE_CNTL<i>.DIG_HPD_SELECT to 5 indicates that no HPD
is assigned to a display endpoint. Firmware decrements the
HPD_SELECT value by 1 before writing it to the register.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.
[How]
1) DMUB posts SET_CONFIG reply as an Outbox1 message of type
DMUB_OUT_CMD__SET_CONFIG_REPLY.
2) The dmub async to sync mechanism for AUX is modified to accommodate
SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To add support for dpia debug options.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We requires information from DPCD in order to identify USB4 DP
tunneling targets.
[How]
Add USB4 DP tunneling fields to DPCD struct and populate these fields
during sink detection.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.
[How]
1) Added inbox1 DPIA command subtype DMUB_CMD__DPIA_SET_CONFIG_ACCESS to
issue SET_CONFIG command to DMUB in dc_process_dmub_set_config_async().
DMUB processes the command with DPIA sends reply back immediately or
in an outbox1 message triggering an outbox1 interrupt to driver.
2) DMUB posts SET_CONFIG reply as an Outbox1 message of type
DMUB_OUT_CMD__SET_CONFIG_REPLY.
3) The dmub async to sync mechanism for AUX is modified to accommodate
SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Clear training pattern sequence for hop in display path once clock
recovery and equalization phases of DP tunnel link training completed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Equalisation is the mandatory second phase of DisplayPort link training
over a USB4 DP tunnel.
[How]
Implement equalisation phase for DP tunneled over USB4 in DPIA
training module.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Clock recovery is the mandatory first phase of DP link training.
[How]
- Implement clock recovery phase in DPIA training module.
- Add helper functions for building SET_CONFIG messages.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Training settings need to be applied to DPIA link at start of each
training loop. Note: FEC readiness should be configured before link
training while FEC enablement should be configured once training is
complete.
[How]
- Implement DPIA link configuration function.
- Account for dynamically assigned link encoders during link
configuration.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Training of DPIA link differs enough from that of conventional
DP link to warrant a separate implementation.
[How]
- Implement top-level of DPIA training loop.
- Make functions shared between DP and DPIA link training "public".
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Conventional links are trained with fallback during sink detection.
Have DPIA links trained with fallback too.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Driver does not need to train the first hop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
1. Add stub for getting tunneling device data
2. Add check for phy_repeater_cnt < 0xff to LTTPR check
3. Add two more bits of information to DPIA links
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add stub for DPIA link training and define new DPIA DMUB commands
to support it.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We will need a way to distinguish physically connected
links and DPIA endpoints.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To add support for HPD & HPD RX interrupt handling for USB4 DPIA in
YELLOW_CARP_B0. USB4 DPIA HPD & HPD RX interrupts are issued from DMUB to
driver as a outbox1 message.
[HOW]
1) Created get_link_index_from_dpia_port_index() to retrieve link index
from dpia port index for HPD & HPD RX dmub notifications.
2) Added DMUB HPD & HPD RX handling in dmub_srv_stat_get_notification().
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To enable dc links for USB4 DPIA ports and AUX command tunneling
for YELLOW_CARP_B0.
[HOW]
1) Created dc links for all USB4 DPIA ports in create_links().
dc_link_construct() implementation is split for legacy DDC and DPIAs.
As usb4 has no ddc, ddc->ddc_pin will be set to NULL for its dc link
and this parameter will be used to identify the dc links as DPIA. The
dc link for DPIA is further to be enhanced with implementation for link
encoder and link initialization.
2) usb4_dpia_count in struct resource_pool will be initialized to 4 in
dcn31_resource_construct() if the DCN is YELLOW_CARP_B0.
3) Enabled DMUB AUX via outbox for YELLOW_CARP_B0.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
USB4 endpoints are dynamically mapped. We create additional link
encoders for USB4 use when DC is created and destroy them when DC
is destructed
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ind_block_64b_no_128bcl means INDEP_64B && INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx10.3.
ind_block_64b means INDEP_64B && !INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx9 and gfx10.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DQE's promotion test, error appears in dmesg at boot
on dcn3.1;
[How]
Add NULL pointor check for the pointor to the amdgpu_dm_connector;
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Trying to enable multiple displays simultaneously exposed shortcomings
with the algorithm for dynamic link encoder assignment.
The main problems were:
- Assuming stream order remained constant across states would
sometimes lead to invalid DIG encoder assignment.
- Incorrect logic for deciding whether or not a DIG could support a
stream would also sometimes lead to invalid DIG encoder assignment.
- Changes in encoder assignment were wholesale while updating of the
pipe backend is incremental. This would lead to the hardware state
not matching the software state even with valid encoder assignments.
[How]
The following changes fix the identified problems.
- Use stream pointer rather than stream index to track streams across
states.
- Fix DIG compatibility check by examining the link signal type
rather than the stream signal type.
- Modify assignment algorithm to make incremental updates so software
and hardware states remain coherent.
Additionally:
- Add assertions and an encoder assignment validation
function link_enc_cfg_validate() to detect potential problems with
encoder assignment closer to their root cause.
- Reduce the frequency with which the assignment algorithm is
executed. It should not be necessary for fast state validation.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The codes to blank all dp display have been called many times,
so add a helper in dc_link to make it more concise.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- New firmware version
- Fix DMUB problems on stress test.
- Improve link training by skip overrride for preferred link
- Refinement of FPU code structure for DCN2
- Fix 3DLUT skipped programming
- Fix detection of 4 lane for DPALT
- Fix dcn3 failure due to dmcbu_abm not created
- Limit display scaling to up to 4k for DCN 3.1
- Add helper for blanking all dp displays
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPALT detection for B0 PHY has its own set of RDPCSPIPE registers
[How]
Use RDPCSPIPE registers to detect if DPALT lane is 4 lane
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The existing limit was mistakenly bigger than 4k for DCN 3.1
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current FPU code for DCN2x is located under dml/dcn2x.
This is not aligned with DC's general source tree
structure.
[How]
Move FPU code for DCN2x to dml/dcn20.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Overriding link setting inside override_training_settings
result in fallback link settings being ignored. This can
potentially cause link training to always fail and consequently
result in an infinite loop of link training to occur in
dp_verify_link_cap during detection.
[How]
Since preferred link settings are already considered inside
decide_link_settings, skip the check in override_training_settings
to avoid infinite link training loops.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I suppose intel_dp_dump_link_status() might be useful for diagnosing
link training failures. Hoever we only call from the channel EQ phase
currently. Let's call it from the CR phase as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-6-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Unify all debug prints during link training to include information
on both the encoder and the LTTPR. We unify the format to something
like "[ENCODER:1:FOO][LTTPR 1] Something something". Though not
sure if those brackets around the dp_phy just make it look like
line noise? I'll accept suggestions on better formatting.
I'm slightly on the fence about also including the connector,
but technically only the DPRX is the SST connector (ie.
intel_dp->attached_connector). I suppose you could think of it
as the branch device/whatever in the topology, and we're training
the link leading to it. So that could argue for its inclusion.
But it's all getting a bit long alrady, so not going to do it
I think.
v2: Keep the connector name in the final passed/failed debug print
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Currently we consider the max vswing reached when we transmit a
the max voltage level, but we don't consider pre-emphasis at all.
This kinda matches older DP specs that only had some vague text
about transmitting the maximum voltage swing. Latest versions
now say something vague about consider the sum of the vswing
and pre-emphasis fields in the ADJUST_REQUEST_LANE registers.
Very vague, and super confusing especially the fact that it
talks about transmitted voltgage swing in the same sentence
as it say to look at the requested values.
Also glanced at the link CTS spec, and that one seems to have
tests that assume contradicting behaviour. Some say to consider
just the vswing level we transmit, others say to check for
sum of transmitted vswing+preemph being 3.
So let's try to take some kind of sane middle ground here.
I think what could make sense is only consider max vswing
reached if MAX_SWING_REACHED==1 _and_ vswing+preemph==3.
That will allow things to go all the way up to vswing 3 +
pre-emph 0 or vswing 2 + pre-emph 1, depending on what
the maximum supported vswing is. Only considering the sum
of vswing+pre-emph doesn't make much sense to me since
we could terminate too early if the sink requests eg.
vswing 0 + pre-emph 3. And if we'd stick to the current
code we could terminate too early of the sink asks for
vswing 2 + pre-emph 0 when vswing level 3 is not supported.
Side note: I don't really understand why any of this stuff is
"specified" at all. There is already a limit of 5 attempts at
the same vswing+pre-emph level, and a total limit of 10
attempts. So might as well stick to the same max 5 attempts
across the board IMO.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
- set DRM_CONNECTOR_POLL_HPD as the connector will generate hotplug
events on its own
- do not call drm_kms_helper_hotplug_event() unless mode_config.funcs
pointer is not NULL to remove possible kernel oops.
Fixes: bc6fa8676e ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708230329.395976-1-dmitry.baryshkov@linaro.org
The helper function devm_add_action_or_reset() will internally
call devm_add_action(), and if devm_add_action() fails then it will
execute the action mentioned and return the error code. So
use devm_add_action_or_reset() instead of devm_add_action()
to simplify the error handling, reduce the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125909.215-1-caihuoqing@baidu.com
When using single_open() for opening, single_release() should be
called, otherwise the 'op' allocated in single_open() will be leaked.
Fixes: 6e9fc17739 ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-2-yangyingliang@huawei.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
When using single_open() for opening, single_release() should be
called, otherwise the 'op' allocated in single_open() will be leaked.
Fixes: 12885ecbfe ("drm/nouveau/kms/nvd9-: Add CRC support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-1-yangyingliang@huawei.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm_bo_init() invokes the provided
destructor which should de-initialize and free the memory.
Thus, when nouveau_bo_init() returns an error the gem object has already
been released and the memory freed by nouveau_bo_del_ttm().
Fixes: 019cbd4a4f ("drm/nouveau: Initialize GEM object before TTM object")
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203000220.18238-1-jcline@redhat.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
After commit 928f9e2686 ("clk: fractional-divider: Hide
clk_fractional_divider_ops from wide audience") was merged it appears
that the DSI panel on my Odroid Go Advance stopped working. Upon closer
examination of the problem, it looks like it was the fixup in the
rockchip_drm_vop.c file was causing the issue. The changes made to the
clk driver appear to change some assumptions made in the fixup.
After debugging the working 5.14 kernel and the no-longer working
5.15 kernel, it looks like this was broken all along but still
worked, whereas after the fractional clock change it stopped
working despite the issue (it went from sort-of broken to very broken).
In the 5.14 kernel the dclk_vopb_frac was being requested to be set to
17000999 on my board. The clock driver was taking the value of the
parent clock and attempting to divide the requested value from it
(17000000/17000999 = 0), then subtracting 1 from it (making it -1),
and running it through fls_long to get 64. It would then subtract
the value of fd->mwidth from it to get 48, and then bit shift
17000999 to the left by 48, coming up with a very large number of
7649082492112076800. This resulted in a numerator of 65535 and a
denominator of 1 from the clk driver. The driver seemingly would
try again and get a correct 1:1 value later, and then move on.
Output from my 5.14 kernel (with some printfs for good measure):
[ 2.830066] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops)
[ 2.839431] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops)
[ 2.855980] Clock is dclk_vopb_frac
[ 2.856004] Scale 64, Rate 7649082492112076800, Oldrate 17000999, Parent Rate 17000000, Best Numerator 65535, Best Denominator 1, fd->mwidth 16
[ 2.903529] Clock is dclk_vopb_frac
[ 2.903556] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16
[ 2.903579] Clock is dclk_vopb_frac
[ 2.903583] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16
Contrast this with 5.15 after the clk change where the rate of 17000999
was getting passed and resulted in numerators/denomiators of 17001/
17000.
Output from my 5.15 kernel (with some printfs added for good measure):
[ 2.817571] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops)
[ 2.826975] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops)
[ 2.843430] Rate 17000999, Parent Rate 17000000, Best Numerator 17018, Best Denominator 17017
[ 2.891073] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000
[ 2.891269] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000
[ 2.891281] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000
I have tested the change extensively on my Odroid Go Advance (Rockchip
RK3326) and it appears to work well. However, this change will affect
all Rockchip SoCs that use this driver so I believe further testing
is warranted. Please note that without this change I can confirm
at least all PX30s with DSI panels will stop working with the 5.15
kernel.
Upon advice from Doug Anderson <dianders@chromium.org> it was decided
that we would first check if the clock rate can be set exactly as
requested, and only if it could not would we then add 999 to it and
attempt the process again. This way we can preserve the behavior for
clocks that still need it while resolving the specific issue for the
PX30 and DSI panels (since it is using a fractional clock).
Changes since v2:
- Moved fixes to correct location.
Changes since v1:
- Made the addition of 999 conditional based on whether the clock
subsystem can set the actual clock rate as requested.
- Updated the notes in the fixup routine to reflect this new behavior.
- Added reference to original commit, as this has technically been
broken since then however only now is it an issue due to the clock
changes.
Fixes: 4e7cf74fa3 ("clk: fractional-divider: Export approximation algorithm to the CCF users")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916202907.18394-1-macroalpha82@gmail.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We don't currently have any kind of real acceleration on Ampere GPUs,
but the TTM memcpy() fallback paths aren't really designed to handle
copies between different devices, such as on Optimus systems, and
result in a kernel OOPS.
A few options were investigated to try and fix this, but didn't work
out, and likely would have resulted in a very unpleasant experience
for users anyway.
This commit adds just enough support for setting up a single channel
connected to a copy engine, which the kernel can use to accelerate
the buffer copies between devices. Userspace has no access to this
incomplete channel support, but it's suitable for TTM's needs.
A more complete implementation of host(fifo) for Ampere GPUs is in
the works, but the required changes are far too invasive that they
would be unsuitable to backport to fix this issue on current kernels.
v2: fix GPFIFO length in RAMFC (reported by Karol)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916220406.666454-1-skeggsb@gmail.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Recent rework, which made HDMI PHY driver a platform device, inadvertely
reversed clock setup order. HW is very touchy about it. Proper way is to
handle controllers resets and clocks first and HDMI PHYs second.
Currently, without this fix, first mode set completely fails (nothing on
HDMI monitor) on H3 era PHYs. On H6, it still somehow work.
Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which
will assure that code is executed after controllers reset & clocks are
handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit
them at controllers driver unload.
Tested on A64, H3, H6 and R40.
Fixes: 9bf3797796 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Commitc7d30623540b ("drm/vc4: hdmi: Remove unused struct") removed the
references to the vc4_hdmi_audio_widgets and vc4_hdmi_audio_routes
structures, but not the structures themselves resulting in two warnings.
Remove it.
Fixes: c7d3062354 ("drm/vc4: hdmi: Remove unused struct")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819140753.930751-1-maxime@cerno.tech
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Enable one additional plane that is alpha blended on top
of the primary plane.
This also fixes the below warnings when building with
-Warray-bounds:
drivers/gpu/drm/kmb/kmb_plane.c:135:20: warning: array subscript 3 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]
drivers/gpu/drm/kmb/kmb_plane.c:132:20: warning: array subscript 2 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]
drivers/gpu/drm/kmb/kmb_plane.c:129:20: warning: array subscript 1 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]
v2: corrected previous patch dependecies so it builds
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20210728003126.1425028-13-anitha.chrisanthus@intel.com/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
In short this makes i915 work for hybrid setups (DRI_PRIME=1 with Mesa)
when rendering is done on Intel dgfx and scanout/composition on Intel
igfx.
Before this patch the driver was not quite ready for that setup, mainly
because it was able to emit a semaphore wait between the two GPUs, which
results in deadlocks because semaphore target location in HWSP is neither
shared between the two, nor mapped in both GGTT spaces.
To fix it the patch adds an additional check to a couple of relevant code
paths in order to prevent using semaphores for inter-engine
synchronisation when relevant objects are not in the same GGTT space.
v2:
* Avoid adding rq->i915. (Chris)
v3:
* Use GGTT which describes the limit more precisely.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113135.768295-1-tvrtko.ursulin@linux.intel.com
In the commit bac9c29482 ("drm/edid: Break out reading block 0 of
the EDID") I broke out reading the base block of the EDID to its own
function. Unfortunately, when I did that I messed up the handling when
drm_edid_is_zero() indicated that we had an EDID that was all 0x00 or
when we went through 4 loops and didn't get a valid EDID. Specifically
I needed to pass the broken EDID to connector_bad_edid() but now I was
passing an error-pointer.
Let's re-jigger things so we can pass the bad EDID in properly.
Fixes: bac9c29482 ("drm/edid: Break out reading block 0 of the EDID")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004092100.1.Ic90a5ebd44c75db963112be167a03cc96f9fb249@changeid
The "digi_port" pointer can't be NULL and we have already dereferenced
it so checking for NULL is not necessary. Delete the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004103737.GC25015@kili
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen.
Fixes: c9a6b82f45 ("drm/amdgpu: Implement DPC recovery")
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen.
Fixes: c9a6b82f45 ("drm/amdgpu: Implement DPC recovery")
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure that we notice this in error reports.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 728e7e0cd6.
Further discussion reveals that this feature is severely broken
and needs to be reverted ASAP.
GPU reset can never be delayed by userspace even for debugging or
otherwise we can run into in kernel deadlocks.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Depends on DRM_AMDGPU_SI and DRM_AMD_DC
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the rare event when GFX IP suspend coincides with a s0ix entry, don't
schedule a delayed work, instead signal PMFW immediately to allow GFXOFF
entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be
signaled about GFXOFF status before amd-pmc module passes OS HINT
to PMFW telling that everything is ready for a safe s0ix entry.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr,
but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it!
Fixes: 264fb4d332 ("drm/amdgpu: Add multi-GPU DMA mapping helpers")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
YELLOW_CARP_B0 address was not correct
[How]
Set YELLOW_CARP_B0 to 0x1A.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG.
[How]
Fix DIG mapping.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 4b7786d87f)
[Why]
Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used.
[How]
Make sure RDPCSPIPE registers are programmed correctly.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit bdd1a21b52)
Set number of engines before attempting to create contexts so the
function free_engines can clean up properly. Also check return of
alloc_engines for NULL.
v2:
(Tvrtko)
- Send as stand alone patch
(John Harrison)
- Check for alloc_engines returning NULL
v3:
(Checkpatch / Tvrtko)
- Remove braces around single line if statement
Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: d4433c7600 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001155825.6762-1-matthew.brost@intel.com
Looks like skl/bxt/derivatives also need the plane stride
stretch w/a when using async flips and VT-d is enabled, or
else we get corruption on screen. To my surprise this was
even documented in bspec, but only as a note on the
CHICHKEN_PIPESL register description rather than on the
w/a list.
So very much the same thing as on HSW/BDW, except the bits
moved yet again.
Cc: stable@vger.kernel.org
Cc: Karthik B S <karthik.b.s@intel.com>
Fixes: 55ea1cb178 ("drm/i915: Enable async flips in i915")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930190943.17547-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d08df3b0bd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With patch "drm/i915/vbt: Fix backlight parsing for VBT 234+"
the size of bdb_lfp_backlight_data structure has been increased,
causing if-statement in the parse_lfp_backlight function
that comapres this structure size to the one retrieved from BDB,
always to fail for older revisions.
This patch calculates expected size of the structure for a given
BDB version and compares it with the value gathered from BDB.
Tested on Chromebook Pixelbook (Nocturne) (reports bdb->version = 221)
Fixes: d381baad29 ("drm/i915/vbt: Fix backlight parsing for VBT 234+")
Tested-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930134606.227234-1-lma@semihalf.com
(cherry picked from commit 4378daf5d0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Atm during driver loading and system resume TypeC ports are accessed
before their HW/SW state is synced. Move the TypeC port sanitization to
the encoder's sync_state hook to fix this.
v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well
(Jose, Jani)
Fixes: f9e76a6e68 ("drm/i915: Add an encoder hook to sanitize its state during init/resume")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-1-imre.deak@intel.com
(cherry picked from commit 7194dc998d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 989634fb49 ("drm/i915/audio: set HDA link parameters in
driver") makes HDMI audio on Lenovo P350 disappear.
So in addition to TGL, extend the logic to RKL to use BIOS provided
value to fix the regression.
Fixes: 989634fb49 ("drm/i915/audio: set HDA link parameters in driver")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906041300.508458-1-kai.heng.feng@canonical.com
(cherry picked from commit c6b40ee330)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Depends on DRM_AMDGPU_SI and DRM_AMD_DC
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Running into bugchecks during stress test where rptr is 0xFFFFFFFF.
Typically this is caused by a hard hang, and can come from HW outside
of DCN.
[How]
To prevent bugchecks when writing the DMUB rptr, fist check that the
rptr is valid.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove two repeated includings in line 46 and 47.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the rare event when GFX IP suspend coincides with a s0ix entry, don't
schedule a delayed work, instead signal PMFW immediately to allow GFXOFF
entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be
signaled about GFXOFF status before amd-pmc module passes OS HINT
to PMFW telling that everything is ready for a safe s0ix entry.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IP_VERSION(11, 0, 13) does the exact same thing as
IP_VERSION(11, 0, 12) so squash them together.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add jpeg2.6 start/end with updated PCTL0_MMHUB_DEEPSLEEP_IB address.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.lilu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move jpeg2 shared macro to header file
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.lilu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr,
but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it!
Fixes: 264fb4d332 ("drm/amdgpu: Add multi-GPU DMA mapping helpers")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If you set amdgpu.discovery=2 you can force the the driver to
fetch the IP discovery table from a file rather than from the
table shipped on the device. This is useful for debugging and
for device bring up and emulation when the tables may be in flux.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can get the pdev and asic type from the adev. No need
to pass them explicitly.
v2: squash in build fix for !CONFIG_HSA_AMD from Anson
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle SRIOV requirements when adding IP blocks.
v2: add comment about UVD/VCE support on vega20 SR-IOV
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split into several smaller per IP functions to make it
easier to handle ordering issues for things like
SR-IOV in a follow up patch.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow us to query instances versions more cleanly.
Instancing support is not consistent unfortunately. SDMA is a
good example. Sienna cichlid has 4 total SDMA instances, each
enumerated separately (HWIDs 42, 43, 68, 69). Arcturus has 8
total SDMA instances, but they are enumerated as multiple
instances of the same HWIDs (4x HWID 42, 4x HWID 43). UMC
is another example. On most chips there are multiple
instances with the same HWID. This allows us to support both
forms.
v2: rebase
v3: clarify instancing support
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For new chips with no explicit entry in the PCI ID list.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new asic type for asics where we don't have an
explicit entry in the PCI ID list. We don't need
an asic type for these asics, other than something higher
than the existing ones, so just use this for all new
asics.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Default to PSP ucode loading unless the user specifies
direct.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the table rather than asic specific harvest registers.
v2: remove harvesting register checking
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcoding it. We already have the number of VCN
instances from a previous patch, so just update the VCN
instances for chips with static tables.
v2: squash in checks for SDMA3,4 (Guchun)
v3: clarify VCN changes
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are missed.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can store the VCN IP revision for each instance of VCN.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, we will run into error case path.
v2: fix build when CONFIG_DRM_AMD_DC_DCN is not set
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: squash in fix for navy flounder and sienna cichlid
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: switch if statement to a switch statement
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are not going to support any new chips with the old
non-DC code so make it the default.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcoding based on asic_type, use the IP
discovery table to configure the driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hardcode the IP versions for asics without IP discovery tables
and then enumerate the asics based on the IP versions.
TODO: fix SR-IOV support
v2: Squash in HDP fix for Renoir
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So they can be driven by IP discovery table.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can track grab the appropriate DCE info out of the
IP discovery table. This is a separare IP from DCN.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: drop unrelated change
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcoding based on asic_type, use the IP
discovery table to configure the driver.
v2: rebase
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: rebase
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: rebase
v3: switch some if statements to switch statements
v4: add yellow carp fix (Yifan)
v5: squash in fixes for YC and GS (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcoding based on asic_type, use the IP
discovery table to configure the driver.
Only tested on Navi10 so far.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drive the asic setup from the IP discovery table rather than
hardcoded settings based on asic type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: squash in gmc fixes
v3: rebase
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bind to all 0x1002 GPU devices.
For now we explicitly return -ENODEV for generic bindings.
Remove this check once IP discovery based checking is in place.
v2: rebase (Alex)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once we claim all 0x1002 PCI display class devices, we will
need to filter out devices owned by radeon.
v2: rename radeon id array to make it more clear that
the devices are not supported by amdgpu.
add r128, mach64 pci ids as well
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: rebase, squash in navi10 fixes (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: rebase
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial support for all navi based parts.
v2: rebase
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So they can be driven by IP dicovery table.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can track grab the appropriate XGMI info out of the
IP discovery table.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prerequisite for using IP versions in the driver rather
than asic type.
v2: Use IP_VERSION() macro instead of new function
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can check the IP versions directly rather than using
asic type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Useful for debugging and new asic validation.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clear error count when persistant harvesting is not enabled
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some reason we're defining DP 2.0 definitions inside our
driver. Now that patches to introduce relevant definitions
are slated to be merged into drm-next this is causing conflicts.
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c:33:
In file included from ./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:70:
In file included from ./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu_mode.h:36:
./include/drm/drm_dp_helper.h:1322:9: error: 'DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER' macro redefined [-Werror,-Wmacro-redefined]
^
./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dp_types.h:881:9: note: previous definition is here
^
1 error generated.
[How]
Guard all display driver defines with #ifndef for now. Once we pull
in the new definitions into amd-staging-drm-next we will follow
up and drop definitions from our driver and provide follow-up
header updates for any addition DP 2.0 definitions required
by our driver.
We also ensure drm_dp_helper.h is included before dc_dp_types.h.
v3: Ensure drm_dp_helper.h is included before dc_dp_types.h
v2: Add one missing endif
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In ras poison mode, page retirement will be handled by the irq handler of the
module which consumes corrupted data.
v2: rename ras_process_cb to ras_poison_consumption_handler.
move the handler's implementation from ASIC specific file to common
file.
v3: call gpu reset for xGMI connected mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the s2idle stress test sdma resume fail occasionally,in the
failed case GPU is in the gfxoff state.This issue may introduce
by firmware miss handle doorbell S/R and now temporary fix the issue
by forcing exit gfxoff for sdma resume.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
add display related cyan_skillfish files in.
makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag.
v2: squash in clang fixes from Harry, Nathan
v3: squash in missing CONFIG_DRM_AMD_DC check (Alex)
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Jun Lei <jun.lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the VT-d vs. async flip issues are plaguing a wider range
of supported hw let's try to minimize the impact on normal
operation by flipping the relevant chicken bits on and off
as needed. I presume there is some power/perf impact on since
this is reducing some prefetching I think.
Cc: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930190943.17547-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Looks like skl/bxt/derivatives also need the plane stride
stretch w/a when using async flips and VT-d is enabled, or
else we get corruption on screen. To my surprise this was
even documented in bspec, but only as a note on the
CHICHKEN_PIPESL register description rather than on the
w/a list.
So very much the same thing as on HSW/BDW, except the bits
moved yet again.
Cc: stable@vger.kernel.org
Cc: Karthik B S <karthik.b.s@intel.com>
Fixes: 55ea1cb178 ("drm/i915: Enable async flips in i915")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930190943.17547-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
i915 enables a wider set of warnings with '-Wall -Wextra' then disables
several with cc-disable-warning. If an unknown flag gets added to
KBUILD_CFLAGS when building with clang, all subsequent calls to
cc-{disable-warning,option} will fail, meaning that all of these
warnings do not get disabled [1].
A separate series will address the root cause of the issue by not adding
these flags when building with clang [2]; however, the symptom of these
extra warnings appearing can be addressed separately by just removing
the calls to cc-disable-warning, which makes the build ever so slightly
faster because the compiler does not need to be called as much before
building.
The following warnings are supported by GCC 4.9 and clang 10.0.1, which
are the minimum supported versions of these compilers so the call to
cc-disable-warning is not necessary. Masahiro cleaned this up for the
reset of the kernel in commit 4c8dd95a72 ("kbuild: add some extra
warning flags unconditionally").
* -Wmissing-field-initializers
* -Wsign-compare
* -Wtype-limits
* -Wunused-parameter
-Wunused-but-set-variable was implemented in clang 13.0.0 and
-Wframe-address was implemented in clang 12.0.0 so the
cc-disable-warning calls are kept for these two warnings.
Lastly, -Winitializer-overrides is clang's version of -Woverride-init,
which is disabled for the specific files that are problematic. clang
added a compatibility alias in clang 8.0.0 so -Winitializer-overrides
can be removed.
[1]: https://lore.kernel.org/r/202108210311.CBtcgoUL-lkp@intel.com/
[2]: https://lore.kernel.org/r/20210824022640.2170859-1-nathan@kernel.org/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914194944.4004260-1-nathan@kernel.org
Now that all the pieces are in place we can add a description of how the
feature works. Also modify the comments in struct intel_pxp into
kerneldoc.
v2: improve doc (Rodrigo)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-17-alan.previn.teres.alexis@intel.com
2 debugfs files, one to query the current status of the pxp session and one
to trigger an invalidation for testing.
v2: rename debugfs, fix date (Alan)
v12: rebased to latest drm-tip (rename of files/structs from
debugfs_gt to intel_debugfs_gt caused compiler errors).
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by : Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-16-alan.previn.teres.alexis@intel.com
When protected sufaces has flipped and pxp session is disabled,
display black pixels by using plane color CTM correction.
v2:
- Display black pixels in async flip too.
v3:
- Removed the black pixels logic for async flip. [Ville]
- Used plane state to force black pixels. [Ville]
v4 (Daniele): update pxp_is_borked check.
v5: rebase on top of v9 plane decryption moving the decrypt check
(Juston)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gaurav Kumar <kumar.gaurav@intel.com>
Cc: Shankar Uma <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-15-alan.previn.teres.alexis@intel.com
Add support to enable/disable PLANE_SURF Decryption Request bit.
It requires only to enable plane decryption support when following
condition met.
1. PXP session is enabled.
2. Buffer object is protected.
v2:
- Used gen fb obj user_flags instead gem_object_metadata. [Krishna]
v3:
- intel_pxp_gem_object_status() API changes.
v4: use intel_pxp_is_active (Daniele)
v5: rebase and use the new protected object status checker (Daniele)
v6: used plane state for plane_decryption to handle async flip
as suggested by Ville.
v7: check pxp session while plane decrypt state computation. [Ville]
removed pointless code. [Ville]
v8 (Daniele): update PXP check
v9: move decrypt check after icl_check_nv12_planes() when overlays
have fb set (Juston)
v10 (Daniele): update PXP check again to match rework in earlier
patches and don't consider protection valid if the object has not
been used in an execbuf beforehand.
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Huang Sean Z <sean.z.huang@intel.com>
Cc: Gaurav Kumar <kumar.gaurav@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v9
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-14-alan.previn.teres.alexis@intel.com
During the power event S3+ sleep/resume, hardware will lose all the
encryption keys for every hardware session, even though the
session state might still be marked as alive after resume. Therefore,
we should consider the session as dead on suspend and invalidate all the
objects. The session will be automatically restarted on the first
protected submission on resume.
v2: runtime suspend also invalidates the keys
v3: fix return codes, simplify rpm ops (Chris), use the new worker func
v4: invalidate the objects on suspend, don't re-create the arb sesson on
resume (delayed to first submission).
v5: move irq changes back to irq patch (Rodrigo)
v6: drop invalidation in runtime suspend (Rodrigo)
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-13-alan.previn.teres.alexis@intel.com
Now that we can handle destruction and re-creation of the arb session,
we can postpone the start of the session to the first submission that
requires it, to avoid keeping it running with no user.
v10: increase timeout when waiting in intel_pxp_start as firmware
session startup is slower right after boot.
v13: increase the same timeout by 50 milisec because previous timeout
was not enough to cover two lower level 100 milisec timeouts
in the session termination + creation steps.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-12-alan.previn.teres.alexis@intel.com
This api allow user mode to create protected buffers and to mark
contexts as making use of such objects. Only when using contexts
marked in such a way is the execution guaranteed to work as expected.
Contexts can only be marked as using protected content at creation time
(i.e. the parameter is immutable) and they must be both bannable and not
recoverable. Given that the protected session gets invalidated on
suspend, contexts created this way hold a runtime pm wakeref until
they're either destroyed or invalidated.
All protected objects and contexts will be considered invalid when the
PXP session is destroyed and all new submissions using them will be
rejected. All intel contexts within the invalidated gem contexts will be
marked banned. Userspace can detect that an invalidation has occurred via
the RESET_STATS ioctl, where we report it the same way as a ban due to a
hang.
v5: squash patches, rebase on proto_ctx, update kerneldoc
v6: rebase on obj create_ext changes
v7: Use session counter to check if an object it valid, hold wakeref in
context, don't add a new flag to RESET_STATS (Daniel)
v8: don't increase guilty count for contexts banned during pxp
invalidation (Rodrigo)
v9: better comments, avoid wakeref put race between pxp_inval and
context_close, add usage examples (Rodrigo)
v10: modify internal set/get-protected-context functions to not
return -ENODEV when setting PXP param to false or getting param
when running on pxp-unsupported hw or getting param when i915
was built with CONFIG_PXP off
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-11-alan.previn.teres.alexis@intel.com
The HW will generate a teardown interrupt when session termination is
required, which requires i915 to submit a terminating batch. Once the HW
is done with the termination it will generate another interrupt, at
which point it is safe to re-create the session.
Since the termination and re-creation flow is something we want to
trigger from the driver as well, use a common work function that can be
called both from the irq handler and from the driver set-up flows, which
has the addded benefit of allowing us to skip any extra locks because
the work itself serializes the operations.
v2: use struct completion instead of bool (Chris)
v3: drop locks, clean up functions and improve comments (Chris),
move to common work function.
v4: improve comments, simplify wait logic (Rodrigo)
v5: unconditionally set interrupts, rename state_attacked var (Rodrigo)
v10: remove inclusion of intel_gt_types.h from intel_pxp.h (Jani)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-10-alan.previn.teres.alexis@intel.com
Teardown is triggered when the display topology changes and no
long meets the secure playback requirement, and hardware trashes
all the encryption keys for display. Additionally, we want to emit a
teardown operation to make sure we're clean on boot and resume
v2: emit in the ring, use high prio request (Chris)
v3: better defines, stalling flush, cleaned up and renamed submission
funcs (Chris)
v12: fix uninitialized variable bug
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-9-alan.previn.teres.alexis@intel.com
Create the arbitrary session, with the fixed session id 0xf, after
system boot, for the case that application allocates the protected
buffer without establishing any protection session. Because the
hardware requires at least one alive session for protected buffer
creation. This arbitrary session will need to be re-created after
teardown or power event because hardware encryption key won't be
valid after such cases.
The session ID is exposed as part of the uapi so it can be used as part
of userspace commands.
v2: use gt->uncore->rpm (Chris)
v3: s/arb_is_in_play/arb_is_valid (Chris), move set-up to the new
init_hw function
v4: move interface defs to separate header, set arb_is valid to false
on fini (Rodrigo)
v5: handle async component binding
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-8-alan.previn.teres.alexis@intel.com
The setting is required by hardware to allow us doing further protection
operation such as sending commands to GPU or TEE. The register needs to
be re-programmed on resume, so for simplicitly we bundle the programming
with the component binding, which is automatically called on resume.
Further HW set-up operations will be added in the same location in
follow-up patches, so get ready for them by using a couple of
init/fini_hw wrappers instead of calling the KCR funcs directly.
v3: move programming to component binding function, rework commit msg
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-7-alan.previn.teres.alexis@intel.com
Implement the funcs to create the TEE channel, so kernel can
send the TEE commands directly to TEE for creating the arbitrary
(default) session.
v2: fix locking, don't pollute dev_priv (Chris)
v3: wait for mei PXP component to be bound.
v4: drop the wait, as the component might be bound after i915 load
completes. We'll instead check when sending a tee message.
v5: fix an issue with mei_pxp module removal
v6: don't use fetch_and_zero in fini (Rodrigo)
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-6-alan.previn.teres.alexis@intel.com
The context is required to send the session termination commands to the
VCS, which will be implemented in a follow-up patch. We can also use the
presence of the context as a check of pxp initialization completion.
v2: use perma-pinned context (Chris)
v3: rename pinned_context functions (Chris)
v4: split export of pinned_context functions to a separate patch (Rodrigo)
v10: remove inclusion of intel_gt_types.h from intel_pxp.h (Jani)
v13: fixed for loop pointer dereference (Vinay)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-5-alan.previn.teres.alexis@intel.com
Ahead of the PXP implementation, define the relevant define flag and
kconfig option.
v2: flip kconfig default to N. Some machines have IFWIs that do not
support PXP, so we need it to be an opt-in until we add support to query
the caps from the mei device.
v10: change comments from "Gen12+" to "Gen12 and newer"
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-4-alan.previn.teres.alexis@intel.com
This reverts commit 21dde40902.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-16-sean@poorly.run
This reverts commit 399190e708.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-15-sean@poorly.run
This reverts commit 4c048437ef.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-14-sean@poorly.run
This reverts commit 7c5f2eecc2.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-13-sean@poorly.run
This reverts commit 6b92e77156.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-12-sean@poorly.run
This reverts commit a2cd9947d9.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-11-sean@poorly.run
This reverts commit 9b8c437ef1.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-10-sean@poorly.run
This reverts commit 26723c3d6b.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-9-sean@poorly.run
This reverts commit 6067fddc1a.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-8-sean@poorly.run
This reverts commit 6aa2daae58.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-7-sean@poorly.run
This reverts commit fd49ef52e2.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-6-sean@poorly.run
This reverts commit 746826bcf8.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-5-sean@poorly.run
This reverts commit 984c9949f1.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-4-sean@poorly.run
This reverts commit 4f9e860e6a.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-3-sean@poorly.run
This reverts commit 299f040e85.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-2-sean@poorly.run
This reverts commit 8d813d1a53.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-1-sean@poorly.run
LTTPRs should support per-lane drive settings I think, and even if
they don't they should implement their own fallback logic to determine
suitable common drive settings to use for all the lanes.
v2: Actually check the correct thing
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-11-ville.syrjala@linux.intel.com
Adjust the link training code to accommodate per-lane drive settings,
if supported by the platform. Actually enabling this will involve
some changes to each platform's .set_signal_level() implementation,
so for the moment all supported platforms will keep using the current
codepath that just uses the same drive settings for all the lanes.
v2: Fix min() vs. max() fumble
v3: Compact the debug print to a single line
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-10-ville.syrjala@linux.intel.com
In order to have per-lane drive settings we need intel_ddi_level()
to accept the lane as a parameter. That is, the eventual goal is to
call intel_ddi_level() once for each lane. For now we just pass in
a hardcoded 0 and use the same settings for every lane. Ie. no
change in behaviour yet.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-9-ville.syrjala@linux.intel.com
Add XRGB8888 emulation support for devices that can only do RGB332.
v2:
- Support Big Endian (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929191201.34456-3-noralf@tronnes.org
Since intel_ddi_level() now looks at the buf_trans table there's
no point in having intel_ddi_hdmi_num_entries() around. Just
roll the necessary bits of locic into
intel_ddi_hdmi_level()/intel_ddi_level().
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-8-ville.syrjala@linux.intel.com
All callers of intel_ddi_level() duplicate the check+WARN
to make sure the returned level is actually present in the
appropriate buf_trans table. Let's push that stuff into
intel_ddi_level() so the callers don't have to worry about it.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-7-ville.syrjala@linux.intel.com
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.
Remove the implementation of mem_encrypt_active() across all arches.
For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
Currently .set_signal_levels() is only used by encoders in DP mode.
For most modern platforms there is no essential difference between
DP and HDMI, and both codepaths just end up calling the same function
under the hood. Let's get remove the need for that extra indirection
by moving .set_signal_levels() into the encoder from intel_dp.
Since we already plumb the crtc_state/etc. into .set_signal_levels()
the code will do the right thing for both DP and HDMI.
HSW/BDW/SKL are the only platforms that need a bit of care on
account of having to preload the hardware buf_trans register
with the full set of values. So we must still remember to call
hsw_prepare_{dp,hdmi}_ddi_buffers() to do said preloading, and
.set_signal_levels() will just end up selecting the correct entry
for DP, and also setting up the iboost magic for both DP and HDMI.
Note that previously on HSW/BDW/SKL we did write to DDI_BUF_CTL to
select the correct entry until link training started, now that we
call .set_signal_levels() already from hsw_ddi_pre_enable_dp() that
is no longer the case. But it's all safe now that the
intel_ddi_init_dp_buf_reg() call was hoisted up and it no longer
sets up the DDI_BUF_CTL_ENABLE bit (that is still deferred until
link training).
v2: Rebase due to has_{iboost,buf_trans_select}()
Add some notes about the DDI_BUF_CTL situation on HSW/BDW/SKL (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-4-ville.syrjala@linux.intel.com
Add a small helper to determine if DDI_BUF_CTL uses the
DDI_BUF_TRANS_SELECT field, and whether we have the
accompanying DDI_BUF_TRANS table in the hardware.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The DP spec says:
"If the receiver keeps the same value in the ADJUST_REQUEST_LANEx_y
register(s) while the LANEx_CR_DONE bits remain unset, the transmitter
must loop four times with the same voltage swing. On the fifth time,
the transmitter must down-shift to the lower bit rate and must repeat
the CR-lock training sequence as described below."
Lets fix the code to follow that instead of terminating after five
times of transmitting the same signal levels. The text in spec feels
a little bit ambiguous still, but this is my best guess at its meaning.
As a bonus this also gets rid of the train_set[0] stuff which
would not work for per-lane drive settings anyway.
Cc: Imre Deak <imre.deak@intel.com>
CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001160826.17080-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Using the generic extension from the previous patch, a specific multisync
extension enables more than one in/out binary syncobj per job submission.
Arrays of syncobjs are set in struct drm_v3d_multisync, that also cares
of determining the stage for sync (wait deps) according to the job
queue.
v2:
- subclass the generic extension struct (Daniel)
- simplify adding dependency conditions to make understandable (Iago)
v3:
- fix conditions to consider single or multiples in/out_syncs (Iago)
- remove irrelevant comment (Iago)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffd8b2e3dd2e0c686db441a0c0a4a0181ff85328.1633016479.git.mwen@igalia.com
Add support to attach generic extensions on job submission. This patch
is third prep work to enable multiple syncobjs on job submission. With
this work, when the job submission interface needs to be extended to
accommodate a new feature, we will use a generic extension struct where
an id determines the data type to be pointed. The first application is
to enable multiples in/out syncobj (next patch), but the base is
already done for future features. Therefore, to attach a new feature,
a specific extension struct should subclass drm_v3d_extension and
update the list of extensions in a job submission.
v2:
- remove redundant elements to subclass struct (Daniel)
v3:
- add comment for v3d_get_extensions
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed53b1cd7e3125b76f18fe3fb995a04393639bc6.1633016479.git.mwen@igalia.com
Move job memory allocation to v3d_job_init function. This aim to facilitate
error handling in job initialization, since cleanup steps are similar for
all (struct v3d_job)-based types of job involved in a command submission.
To generalize v3d_job_init(), this change takes into account that all job
structs have the first element a struct v3d_job (bin, render, tfu, csd) or
it is a v3d_job itself (clean_job) for pointer casting.
v3:
- explicitly init job as NULL (Iago)
- fix pm failure handling on v3_job_init (Iago)
Suggested-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4d12e07bd334d2cddb51cabd359e99edde595619.1633016479.git.mwen@igalia.com
5.15-rc1 crashes with blank screen when booting up on two ThinkPads
using i915. Bisections converge convincingly, but arrive at different
and suprising "culprits", none of them the actual culprit.
netconsole (with init_netconsole() hacked to call i915_init() when
logging has started, instead of by module_init()) tells the story:
kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245!
with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify().
I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that
function needs to be 4-byte aligned.
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The overflow check does causes a warning from clang-14 when 'sz' is a type
that is smaller than size_t:
drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (sz == SIZE_MAX) {
Change the type accordingly.
Fixes: 20224d715a ("drm/msm/submit: Move copy_from_user ahead of locking bos")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210927113632.3849987-1-arnd@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some userspace apps make assumptions that rendering against multiple
contexts within the same process (from the same thread, with appropriate
MakeCurrent() calls) provides sufficient synchronization without any
external synchronization (ie. glFenceSync()/glWaitSync()). Since a
submitqueue maps to a gl/vk context, having multiple sched entities of
the same priority only works with implicit sync enabled.
To fix this, limit things to a single sched entity per priority level
per process.
An alternative would be sharing submitqueues between contexts in
userspace, but tracking of per-context faults (ie. GL_EXT_robustness)
is already done at the submitqueue level, so this is not an option.
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_file_private is more gpu related, and in the next commit it will
need access to other GPU specific #defines. While we're at it, add
some comments.
Signed-off-by: Rob Clark <robdclark@chromium.org>
In theory a context can be destroyed and a new one allocated at the same
address, making the pointer comparision to detect when we don't need to
update the current pagetables invalid. Instead assign a sequence number
to each context on creation, and use this for the check.
Fixes: 84c31ee16f ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
I've seen some crashes in our crash reporting that *look* like multiple
threads stomping on each other while communicating with GMU. So wrap
all those paths in a lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
If we timeout waiting for a CT reply we print very simple error
message. Improve that and by moving error reporting to the caller
we can use CT_ERROR instead of DRM_ERROR and report just fence
as error code will be reported later anyway.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926184545.1407-5-michal.wajdeczko@intel.com
In commit b839a869df ("drm/i915/guc: Add support for data
reporting in GuC responses") we missed the hypothetical case
that GuC might return positive non-zero value as success data.
While that would be lucky treated as error case, and at the
end will result in reporting valid -EIO, in the meantime this
value will be passed to ERR_PTR that could be misleading.
v2: rebased
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926184545.1407-2-michal.wajdeczko@intel.com
We assumed that for all modern GENs the PTEs and register space are
split in the GTTMMADR BAR, but while it is true, we should rather use
fixed offset as it is defined in the specification.
Bspec: 4409, 4457, 4604, 11181, 9027, 13246, 13321, 44980
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926201005.1450-1-michal.wajdeczko@intel.com
For the brave new world of bridges not creating their own connectors, we
need to implement the max clock limitation via bridge->mode_valid()
instead of connector->mode_valid().
v2: Drop unneeded connector->mode_valid()
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920225801.227211-3-robdclark@gmail.com
While sanitizing the hardware state we're currently forcing
the pipe bottom color legacy csc/gamma bits on. That is not a
good idea as BIOSen are likely to leave gabage in the LUTs and
so doing this causes ugly visual glitches if and when the
planes covering the background get disabled. This was exactly
the case on this Dell Precision 5560 tgl laptop.
On icl+ we don't normally even use these legacy bits
anymore and instead use their GAMMA_MODE counterparts.
On earlier platforms the bits are used, but we still
shouldn't force them on without knowing what's in the LUT.
So two options, get rid of the whole thing, or do what
intel_color_commit() does to make sure the bottom color state
matches whatever out hardware readout produced. I chose the
latter since it'll match what happens on older platforms when
the primary plane gets turned off. In fact let's just call
intel_color_commit(). It'll also do some CSC programming but
since we don't have readout for that it'll actually just set
to all zeros. So in the unlikely case of CSC actually being
enabld by the BIOS we'll end up with all black until the first
atomic commit happens.
Still not totally sure what we should do about color management
features here in general. Probably the safest thing would be to
force everything off exactly at the same time when we disable
the primary plane as there is no guarantees that whatever the
LUTs/CSCs contain make any sense whatsoever without the
specific pixel data in the BIOS fb. And if we preserve the
primary plane then we should disable the color management
features exactly when the primary plane fb contents first
changes since the new content assumes more or less no
transformations. But of course synchronizing front buffer
rendering with anything else is a bit hard...
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3534
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928185105.3030-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-16-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-15-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
While the previous commit was a simple "search and replace", this time I
had to do a bit of refactoring as only one call to
DRM_MODESET_LOCK_ALL_BEGIN() is allowed inside one same function.
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-14-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-13-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-12-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-11-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-10-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-9-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-8-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-7-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-6-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-5-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-4-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-3-greenfoo@u92.eu
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-2-greenfoo@u92.eu
- Use devm_platform_ioremap_resource() helper function instead of old
one.
-----BEGIN PGP SIGNATURE-----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=iPah
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One cleanup
- Use devm_platform_ioremap_resource() helper function instead of old
one.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928074158.2942-1-inki.dae@samsung.com
This can be used to create a separate DRM file description, thus
creating a new GEM handle namespace.
My use-case is wlroots. The library splits responsibilities between
separate components: the GBM allocator creates buffers, the GLES2
renderer uses EGL to import them and render to them, the DRM
backend imports the buffers and displays them. wlroots has a
modular architecture, and any of these components can be swapped
and replaced with something else. For instance, the pipeline can
be set up so that the DRM dumb buffer allocator is used instead of
GBM and the Pixman renderer is used instead of GLES2. Library users
can also replace any of these components with their own custom one.
DMA-BUFs are used to pass buffer references across components. We
could use GEM handles instead, but this would result in pain if
multiple GPUs are in use: wlroots copies buffers across GPUs as
needed. Importing a GEM handle created on one GPU into a completely
different GPU will blow up (fail at best, mix unrelated buffers
otherwise).
Everything is fine if all components use Mesa. However, this isn't
always desirable. For instance when running with DRM dumb buffers
and the Pixman software renderer it's unfortunate to depend on GBM
in the DRM backend just to turn DMA-BUFs into FB IDs. GBM loads
Mesa drivers to perform an action which has nothing driver-specific.
Additionally, drivers will fail the import if the 3D engine can't
use the imported buffer, for instance amdgpu will refuse to import
DRM dumb buffers [1]. We might also want to be running with a Vulkan
renderer and a Vulkan allocator in the future, and GBM wouldn't be
welcome in this setup.
To address this, GBM can be side-stepped in the DRM backend, and
can be replaced with drmPrimeFDToHandle calls. However because of
GEM handle reference counting issues, care must be taken to avoid
double-closing the same GEM handle. In particular, it's not
possible to share a DRM FD with GBM or EGL and perform some
drmPrimeFDToHandle calls manually.
So wlroots needs to re-open the DRM FD to create a new GEM handle
namespace. However there's no guarantee that the file-system
permissions will be set up so that the primary FD can be opened
by the compsoitor. On modern systems seatd or logind is a privileged
process responsible for doing this, and other processes aren't
expected to do it. For historical reasons systemd still allows
physically logged in users to open primary DRM nodes, but this
doesn't work on non-systemd setups and it's desirable to lock
them down at some point.
Some might suggest to open the render node instead of re-opening
the primary node. However some systems don't have a render node
at all (e.g. no GPU, or a split render/display SoC).
Solutions to this issue have been discussed in [2]. One solution
would be to open the magic /proc/self/fd/<fd> file, but it's a
Linux-specific hack (wlroots supports BSDs too). Another solution
is to add support for re-opening a DRM primary node to seatd/logind,
but they don't support it now and really haven't been designed for
this (logind would need to grow a completely new API, because it
assumes unique dev_t IDs). Also this seems like pushing down a
kernel limitation to user-space a bit too hard.
Another solution is to allow creating empty DRM leases. The lessee
FD would have its own GEM handle namespace, so wouldn't conflict
wth GBM/EGL. It would have the master bit set, but would be able
to manage zero resources. wlroots doesn't intend to share this FD
with any other process.
All in all IMHO that seems like a pretty reasonable solution to the
issue at hand.
Note, I've discussed with Jonas Ådahl and Mutter plans to adopt a
similar design in the future.
Example usage in wlroots is available at [3]. IGT test available
at [4].
[1]: https://github.com/swaywm/wlroots/issues/2916
[2]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110
[3]: https://github.com/swaywm/wlroots/pull/3158
[4]: https://patchwork.freedesktop.org/series/94323/
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903130000.1590-2-contact@emersion.fr
"CRTC fixup failed" is probably leftovers from pre-atomic days
when there was an actual fixup() function. Let's unify the debug
messages between encoder vs. crtc compute_config() calls.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930104133.30854-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We may end up in i915_ttm_bo_destroy() in an error path before the
object is fully initialized. In that case it's not correct to call
__i915_gem_free_object(), because that function
a) Assumes the gem object refcount is 0, which it isn't.
b) frees the placements which are owned by the caller until the
init_object() region ops returns successfully. Fix this by providing
a lightweight cleanup function __i915_gem_object_fini() which is also
called by __i915_gem_free_object().
While doing this, also make sure we call dma_resv_fini() as part of
ordinary object destruction and not from the RCU callback that frees
the object. This will help track down bugs where the object is incorrectly
locked from an RCU lookup.
Finally, make sure the object isn't put on the region list until it's
either locked or fully initialized in order to block list processing of
partially initialized objects.
v2:
- The TTM object backend memory was freed before the gem pages were
put. Separate this functionality into __i915_gem_object_pages_fini()
and call it from the TTM delete_mem_notify() callback.
v3:
- Include i915_gem_object_free_mmaps() in __i915_gem_object_pages_fini()
to make sure we don't inadvertedly introduce a race.
Fixes: 48b0961269 ("drm/i915: Move __i915_gem_free_object to ttm_bo_destroy")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20210930113236.583531-1-thomas.hellstrom@linux.intel.com
Having two functions for this seems like excess duplication and
parameter juggling. Merge them together.
While at it, drop the extra error message, as wait_for_payload_credits()
already prints an error, and switch from incidental -EPERM (i.e. -1) to
actual error codes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f74f7462a36e76070db6b4c01616d0eb663b9938.1633000838.git.jani.nikula@intel.com
Move assert_panel_unlocked() to intel_pps.c and rename
assert_pps_unlocked(). Keep the functionality and the assert code
together.
There's still a bit of a split between the eDP PPS usage in intel_pps.c
and all the other PPS usage, and assert_pps_unlocked() is arguably more
related to the latter. However, intel_pps.c is the best fit for anything
touching the PPS registers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a9b77692a145891789eefb0447e082cfc22aaa85.1632992608.git.jani.nikula@intel.com
Add a config option that allows kvm to determine whether or not there
are any external users of page tracking.
Signed-off-by: David Stevens <stevensd@chromium.org>
Message-Id: <20210922045859.2011227-2-stevensd@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With CONFIG_FB=m and CONFIG_DRM=y, we get a link error in the fb helper:
aarch64-linux-ld: drivers/gpu/drm/drm_fb_helper.o: in function `drm_fb_helper_alloc_fbi':
(.text+0x10cc): undefined reference to `framebuffer_alloc'
Tighten the dependency so it is only allowed in the case that DRM can
link against FB.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Link: https://lore.kernel.org/all/20210721152211.2706171-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927142816.2069269-1-arnd@kernel.org
With all the past fixes now this feature is functional and can be
enabled by default in desktop enviroments that uses compositor.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-8-jose.souza@intel.com
With all the recent fixes PSR2 is properly working in Alderlake-P but
due to some issues that don't have software workarounds it will not be
supported in display steppings older than B0.
Even with this patch PSR2 will no be enabled by default in ADL-P, it
still requires enable_psr2_sel_fetch to be set to true, what some
of our tests does.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-7-jose.souza@intel.com
The Wa_14014971508 is required to fix scanout when a feature that i915
do not support is enabled and this feature is not planned to be enabled
for adlp.
Keeping this workaround enabled can badly hurt power-savings when
a full frame fetch is required(see psr2_sel_fetch_plane_state_supported()
and psr2_sel_fetch_pipe_state_supported()).
Here a example that could badly hurt power-savings, userspace does
a page flip to a rotated plane, so CONTINUOS_FULL_FRAME set.
But then for a whole 30 seconds nothing in the screen requires updates
but because CONTINUOS_FULL_FRAME is set, it will not go into DC5/DC6.
Reverting Wa_14014971508 fixes that, as only a single frame will be
sent and then display can go to DC5/DC6 for those 30 seconds of
idleness.
BSpec: 54369
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-6-jose.souza@intel.com
Legacy cursor APIs are handled by intel_legacy_cursor_update(), that
calls drm_atomic_helper_update_plane() when going through the
slow/atomic path to update cursor, what was the case for PSR2
selective fetch.
drm_atomic_helper_update_plane() sets
drm_atomic_state->legacy_cursor_update to true when updating the
cursor plane, to allow several cursor updates to happen within the
same frame, as userspace does that.
If drivers waited for a vblank increment at the end of every cursor
movement that would cause a visible lag in the cursor.
But this optimization do not properly work with PSR2 selective fetch
dirt area calculation, for example if within a single frame the cursor
had 3 moves the final dirt area programmed to PSR2_MAN_TRK_CTL would
be based in the second movement as old state and third movement as new
state, not updating the area where cursor was in the first state.
So here switching back to the fast path approach in
intel_legacy_cursor_update() and handling cursor movements as
frontbuffer rendering(psr_force_hw_tracking_exit()), that is not the
most optimal for power-savings but is the solution that we have until
mailbox style updates is implemented.
Also removing the cursor workaround as not it is properly undestand
the issue and is know that it will never cover all the cases.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-5-jose.souza@intel.com
When PSR2 selective fetch is enabled writes to CURSURFLIVE alone do
not causes the panel to be updated when doing frontbuffer rendering.
From what I was able to figure from experiments the writes to
CURSURFLIVE takes PSR2 from deep sleep but panel is not updated
because PSR2_MAN_TRK_CTL has no start and end region set.
As we don't have the dirt area from current flush and invalidate API
and even if we did userspace could do several draws to frontbuffer and
we would need a way to append all the damaged areas of all the draws
that need to be part of next frame.
So here only programing PSR2_MAN_TRK_CTL to do a single full frame
fetch.
It is a safe approach as if scanout is in the visible area
the single full frame will only be visible for hardware in the next
frame because of the double buffering, and if scanout is in vblank
area it will be draw in the current frame.
No need to disable PSR and wait a few miliseconds to enable it again.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-4-jose.souza@intel.com
This unnecessary flushes are hurting power-savings are it causes
features like PSR, FBC and DRRS to disable it self to handle
frontbuffer rendering, below some explanation of why each removed
call is not necessary.
The flush in intel_prepare_plane_fb() is not required as framebuffer
will be flipped and power-saving features do the proper flip handling
in hardware.
intel_find_initial_plane_obj() flush is not required because it is
only executed during driver load and at this point the power-saving
features are not even enabled.
And the last one intelfb_create(), is also not required as at this
point the fbdev was just allocated, userspace will draw on
it what will trigger frontbuffer invalidates and flushes later on.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-3-jose.souza@intel.com
We are still missing the PSR2 selective fetch handling of multi-planar
formats but until proper handle is added we can workaround it by
doing full frames fetch when state has such formats.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-2-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
PSR2 selective is not supported over rotated and scaled planes.
We had the rotation check in intel_psr2_sel_fetch_config_valid()
but that code path is only execute when a modeset is needed and
those plane parameters can change without a modeset.
Pipe selective fetch restrictions are also needed, it could be added
in intel_psr_compute_config() but pippe scaling is computed after
it is executed, so leaving as is for now.
There is no much loss in this approach as it would cause selective
fetch to not enabled as for alderlake-P and newer will cause it to
switch to PSR1 that will have the same power-savings as do full pipe
fetch.
Also need to check those restricions in the second
for_each_oldnew_intel_plane_in_state() loop because the state could
only have a plane that is not affected by those restricitons but
the damaged area intersect with planes that has those restrictions,
so a full pipe fetch is required.
v2:
- also handling pipe restrictions
BSpec: 55229
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> # v1
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-1-jose.souza@intel.com
Get rid of the local copies and pointers of intel_dp->DP and
instead just poke at it directly. Makes it much easier to see
where it actually gets used/modified.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930134310.31669-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Setting DP_PORT_EN in intel_dp->DP is already handled by
intel_dp_enable_port() so there is no point in setting it also
from the link training code.
For DDI platforms a bit with that name doesn't even exist. The
counterpart is DDI_BUF_CTL_ENABLE, which is already set up by
intel_ddi_prepare_link_retrain(). Fortunately it is the same bit
so there was no harm in doing this from the platform independent
code as well. But it's just confusing when platform independent
code sets platform specific bits in intel_dp->DP. Just get rid
of it.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930134310.31669-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak.intel.com>
I want intel_dp->DP to be fully populated by the time the
initial vswing programming happens. To that end move the
intel_ddi_init_dp_buf_reg() call to an earlier spot.
Additionally we don't want intel_ddi_init_dp_buf_reg() to
set DDI_BUF_CTL_ENABLE since the port should only get enabled
at the start of link training (see intel_ddi_prepare_link_retrain()).
So any earlier write to the register should not set the enable bit.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930134310.31669-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Currently we clear the leftover vswing/preemphasis values only
at the start of link training. That means the initial vswing
programming performed during modeset is going to use stale values
left over from the previous link training sequence, and then at
the start of link training we're going to reset the levels back
to 0. Seems much better to make sure we start with level 0 from
the get go.
Additionally if LTTPRs are present the leftover vswing/preemphasis
values are those of the last link in the chain, so not the values
that our PHY is even using after a successful link training sequence.
So let's make sure everything is cleared up before we start
programming anything.
Suggested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930134310.31669-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
With patch "drm/i915/vbt: Fix backlight parsing for VBT 234+"
the size of bdb_lfp_backlight_data structure has been increased,
causing if-statement in the parse_lfp_backlight function
that comapres this structure size to the one retrieved from BDB,
always to fail for older revisions.
This patch calculates expected size of the structure for a given
BDB version and compares it with the value gathered from BDB.
Tested on Chromebook Pixelbook (Nocturne) (reports bdb->version = 221)
Fixes: d381baad29 ("drm/i915/vbt: Fix backlight parsing for VBT 234+")
Tested-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930134606.227234-1-lma@semihalf.com
Ensure i915_vma_pin_iomap and vma_unpin are done with dpt->obj lock held.
I don't think there's much of a point in merging intel_dpt_pin() with
intel_pin_fb_obj_dpt(), they touch different objects.
Changes since v1:
- Fix using the wrong pointer to retrieve error code (Julia)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929085950.3063191-1-maarten.lankhorst@linux.intel.com
Let's not configure the single transcoder's TRANSCONF multiple
times with bigjoiner. No real harm I suppose but since we already
have the bigjoiner if statement directly above might as well suck
this in there and skip the redundant programming.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Adjust the HSW+ transcoder state readout to just read through
all the possible transcoders for the pipe, and stuff the results
in a bitmask.
We can conveniently cross check the bitmask for invalid
combinations of enabled transcoders, and later we can easily
extend the bitmask readout to handle the bigjoiner case.
One slight change in behaviour is that we no longer read out
the AONOFF->force_pfit.pfit bit for all the enabled "panel
transcoders". But having more than one enabled would anyway
be illegal so no big loss. Also the AONOFF selection should
only ever be used on HSW, which only has the EDP transcoder
an no DSI transcoders.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-10-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
FBC+Yf tiling seems to work just fine, and unlike with linear
the hardware does appear to correctly calculate the CFB stride
with using the override stride on both cfl and glk. So no need
for any additional tweaks.
Cc: Uma Shankar <uma.shankar@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924141330.1515-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Stop using HBR2/3 support as a proxy for TPS3/4 support.
The two are no longer 1:1 in the hardware, arguably they
never were due to HSW ULX which does support TPS3 while
being limited to HBR1.
In more recent times GLK gained support for TPS4 while
being limited to HBR2. And on CNL+ some ports support
HBR3 while others are limited to HBR2, but all ports
support TPS4.
v2: s/INTEL_GEN/DISPLAY_VER/
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929162404.6717-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
When using a panel with a fixed mode we don't change the refresh
rate of the display. Reject any user requested mode which doesn't
match that fixed refresh rate.
Unfortunately when Xorg sees the scaling_mode property on the
connecor it likes to automagically cook up modes whose refresh
rate is a fair bit off from the fixed refresh rate we use. So
we have to give it some extra latitude so that we don't start to
reject all of it.
v2: sDVO now uses intel_panel_compute_config() too
v3: Add a debug message to inform the user what happened
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2939
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929184536.8332-1-ville.syrjala@linux.intel.com
Let's introduce a compute_config() helper for fixed mode panels.
For now all it does is the fixed_mode->adjusted_mode copy.
Note that with sDVO we have to ask the external encoder chip
to spit out our actual display timings for us, so the fixed_mode
to adjusted_mode copy done by intel_panel_compute_config() is
redundant, but we still want to use it to do other checks for us
later. We'll be fine so long as we only call it before
intel_sdvo_get_preferred_input_mode() overwrites adjusted_mode
with the timings from the encoder.
v2: Use intel_panel_compute_config() with sDVO
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927185207.13620-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When using a fixed mode we won't change the refresh rate ever.
So filter out all modes that don't match the fixed_mode's refresh
rate.
I'm going to declare the "rounded to nearest Hz refresh
rates must match" approach good enough for now.
Note that we could start supporting multiple refresh rates
with panels that can do it, but that would mean replacing
the single fixed mode concept with a list of fixed modes.
Then we could look for the closest match to the user's
requested refresh rate and use that. But all of that would
be a fair bit of work so we'll leave it for later.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2939
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923200109.4459-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
All fixed mode panels should behave the same way when it comes to mode
filtering. Reuse the intel_panel_mode_valid() for all of them.
This changes the behaviour to match what we do for eDP, ie.
reject anything that doesn't exactly match the fixed mode
dimensions. Users can still manually provide different
sized modes which will be handled by the panel fitter just
as before. The difference is that we can no longer report
funny modes in the connector's mode list.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923200109.4459-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
This patch is to add cyan_skillfish asic header files.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Jun Lei <jun.lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support libdrm tests.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle all DMA IOMMU group related dependencies before the
group is removed and we try to access it after free.
v2:
Move the actul handling function to TTM
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We use the number_instance index that we get from the fw discovery blob
to index into an array for example.
Update error messages (Alex)
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The two AMD drivers have their own custom offsetof() implementation
that now triggers a warning with recent versions of clang:
drivers/gpu/drm/radeon/radeon_atombios.c:133:14: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]
Change all the instances to use the normal offsetof() provided
by the kernel that does not have this problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use resource_size function on resource object
instead of explicit computation.
Clean up coccicheck warning:
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:905:10-13: ERROR: Missing
resource_size with res
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The overflow check in amdgpu_bo_list_create() causes a warning with
clang-14 on 64-bit architectures, since the limit can never be
exceeded.
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c:74:18: error: result of comparison of constant 256204778801521549 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (num_entries > (SIZE_MAX - sizeof(struct amdgpu_bo_list))
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The check remains useful for 32-bit architectures, so just avoid the
warning by using size_t as the type for the count.
Fixes: 920990cb08 ("drm/amdgpu: allocate the bo_list array after the list")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX9+, format modifiers are always enabled and ensure the
frame-buffers can be scanned out at ADDFB2 time.
On GFX8-, format modifiers are not supported and no other check
is performed. This means ADDFB2 IOCTLs will succeed even if the
tiling isn't supported for scan-out, and will result in garbage
displayed on screen [1].
Fix this by adding a check for tiling flags for GFX8 and older.
The check is taken from radeonsi in Mesa (see how is_displayable
is populated in gfx6_compute_surface).
Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel)
[1]: https://github.com/swaywm/wlroots/issues/3185
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit 2766534b76 added the offset
header but didn't add the masks. This adds the masks based on what
was selected for the offsets.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path
[how]
pass in pci deviceid, and break once dal_version initialized.
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recently debugging efforts have involved setting/checking the
X.Y value used during payload allocation. Current output for
Y was calculated with incorrect bitshift. Y value is also not
human readable.
[How]
Refactor logging into separate function. Fix Y calculation error
and format output to be human readable.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Theoretically rare corner case where ceil(Y) results in rounding
up to an integer. If this happens, the 1 should be carried over to
the X value.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a chance verified link cap can be greater than max link cap.
This causes software hang because we cannot power up PHY with link rate
that cannot handle.
The change is to guard verfieid link cap from becoming larger than max link cap
our PHy can support.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Stack variable params.backlight_ramping_override is uninitialized, so it
contains junk data
[How]
Initialize the variable to false
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Blnd, 3dlut, and shaper LUT select registers are double buffered, however
their accompanying LUT memory shutdown registers are not. As a result,
shutting down LUT memory immediately after setting a block to bypass causes
corruption as bypass only happens at next Vupdate.
[HOW]
Re-enable mem low power for CM block
Force optimization on next flip and disable LUT memory during optimization
sequence if LUT select field is then set to bypass
v2: squash in CONFIG_DRM_AMD_DC_DCN fix (Alex)
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PHY ownership release->AUX PW disable steps during a modeset
disable->PHY disconnect sequence can hang the system if the PHY
disconnect happens after disabling the PHY's PLL. The spec doesn't
require a specific order for these two steps, so this issue is still
being root caused by HW/FW teams. Until that is found, let's make
sure the disconnect happens before the PLL is disabled, and do this on
all platforms for consistency.
v2: Add a TODO comment to remove the w/a once the issue is root
caused/fixed. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-7-imre.deak@intel.com
After the previous patch the driver holds a power domain blocking
TC-cold whenever the port is locked, so we can remove the extra blocking
around the lock/unlock sequence.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-13-imre.deak@intel.com
So far TC-cold was blocked only for the duration of TypeC mode resets.
The DP-alt and legacy modes require TC-cold to be blocked also whenever
the port is in use (AUX transfers, enable modeset), and this was ensured
by the held PHY ownership flag. On ADL-P this doesn't work, since the
PHY ownership flag is in a register backed by the PW#2 power well.
Whenever this power well is disabled the ownership flag is cleared by
the HW under the driver.
The only way to cleanly release and re-acquire the PHY ownership flag
and also allow for power saving (by disabling the display power wells
and reaching DC5/6 states) is to hold the TC-cold blocking power domains
while the PHY is connected and disconnect/reconnect the PHY on-demand
around AUX transfers and modeset enable/disables. Let's do that,
disconnecting a PHY with a 1 sec delay after it becomes idle. For
consistency do this on all platforms and TypeC modes.
v2: Add tc_mode!=disconnected and phy_is_owned asserts to
__intel_tc_port_lock().
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-6-imre.deak@intel.com
While a TypeC port mode is locked a DISPLAY_CORE power domain reference
is held, which implies a runtime PM ref. By removing the ICL !legacy
port special casing, a TC_COLD_OFF power domain reference will be taken
for such ports, which also translates to a runtime PM ref on that
platform. A follow-up change will stop holding the DISPLAY_CORE power
domain while the port is locked.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-11-imre.deak@intel.com
For the ADL-P TBT mode the spec doesn't require blocking TC-cold by
using the legacy AUX power domain. To avoid the timeouts that this would
cause during PHY disconnect/reconnect sequences (which will be more
frequent after a follow-up change) use the TC_COLD_OFF power domain in
TBT mode on all platforms. On TGL this power domain blocks TC-cold via a
PUNIT command, while on other platforms the domain just takes a runtime
PM reference.
If the HPD live status indicates that the port mode needs to be reset
- for instance after switching from TBT to a DP-alt sink - still take
the AUX domain, since the IOM firmware handshake requires this.
v2: Rebased on v2 of the previous patch.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-5-imre.deak@intel.com
A follow-up change will select the TC-cold blocking power domain based
on the TypeC mode, prepare for that here.
Also bring intel_tc_cold_requires_aux_pw() earlier to its logical place
for readability.
No functional change.
v2: Add code comment about IOM reg accesses in TCCOLD. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-4-imre.deak@intel.com
A follow-up change will start to disconnect/re-connect PHYs around AUX
transfers and modeset enable/disables. To prepare for that add a new
TypeC PHY disconnected mode, to help tracking the TC-cold blocking power
domain status (no power domain in disconnected state, mode dependent
power domain in connected state).
v2: Move the !disconnected mode and phy-owned asserts in
__intel_tc_port_lock() later in the patchset, when the asserts will
hold. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-3-imre.deak@intel.com
A follow-up patch will disconnect/reconnect PHYs around AUX transfers
and modeset enable/disables. To prepare for that and make things
consistent for all TypeC modes stop connecting the PHY in legacy mode
without a sink being connected. This was done before since in legacy
mode the PHY is dedicated to display usage, so there was no point in
disconnecting it. However after the follow-up changes the TC-cold
blocking power domains will be held as long as the PHY is in the
connected state, so we'll need to disconnect/re-connect the PHY in all
TypeC modes to allow for power saving.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-7-imre.deak@intel.com
Instead of directly accessing the TypeC port internal struct members,
add/use helpers to retrieve the corresponding properties.
No functional change.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-6-imre.deak@intel.com
On ADL-P the PHY ready/complete flag is always set even in TBT-alt mode.
To avoid taking the PHY ownership and the following spurious "PHY sudden
disconnect" messages on this platform when connecting the PHY in TBT
mode, check if there is any DP-alt or legacy sink connected before
taking the ownership.
v2: (Jose)
- Fix debug message clarifying that a TBT sink can be connected.
- Add comments describing the PHY complete HW flag semantic differences
between adl-p and other platforms.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-2-imre.deak@intel.com
Waiting for the PHY complete flag to clear when releasing the PHY
ownership was add in
commit ddec362724 ("drm/i915: Wait for TypeC PHY complete flag to clear in safe mode")
This isn't required by the spec, the vague idea was to make the
handshake with the firmware more robust, without actual evidence for
when it would be needed. Checking this again, the flag doesn't clear on
ICL until after the PHY's PLL is disabled and the flag is permanently
set on ADL-P. To avoid the spurious timeout messages in dmesg, just
remove this wait.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-4-imre.deak@intel.com
On ADL-P the PHY ready (aka status complete on other platforms) flag is
always set, besides when a DP-alt, legacy sink is connected also when a
TBT sink is connected or nothing is connected. So assume the PHY to be
connected when both the TBT live status and PHY ready flags are set.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-3-imre.deak@intel.com
Atm during driver loading and system resume TypeC ports are accessed
before their HW/SW state is synced. Move the TypeC port sanitization to
the encoder's sync_state hook to fix this.
v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well
(Jose, Jani)
Fixes: f9e76a6e68 ("drm/i915: Add an encoder hook to sanitize its state during init/resume")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-1-imre.deak@intel.com
Display underrun in HDR mode when cursor is enabled.
RTL fix will be implemented CLKGATE_DIS_PSL_A bit 28-46520h.
As per W/A 1604331009, Disable cursor clock gating in HDR mode.
Bspec : 33451
Changes since V6:
- Address checkpatch warnings
- Bit ordering
Changes since V5:
- replace intel_de_read with intel_de_rmw - Jani
Changes since V4:
- Added WA needed check - Ville
- Replace BIT with REG_BIT - Ville
- Add WA enable/disable support back which was
added in V1 - Ville
Changes since V3:
- Disable WA when not in HDR mode or cursor plane
not active - Ville
- Extract required args from crtc_state - Ville
- Create HDR mode API using bdw_set_pipemisc ref - Ville
- Tested with HDR video as well full setmode, WA
applies and disables
Changes since V2:
- Made it general gen11 WA
- Removed WA needed check
- Added cursor plane active check
- Once WA enable, software will not disable
Changes since V1:
- Modified way CLKGATE_DIS_PSL bit 28 was modified
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929052442.2543054-1-tejaskumarx.surendrakumar.upadhyay@intel.com
In commit:
commit 667a50db04
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jan 3 11:17:18 2014 +0100
drm/ttm: Refuse to fault (prime-) imported pages
we introduced the restriction that imported pages should not be directly
mappable through TTM(this also extends to userptr). In the next patch we
want to introduce a shmem_tt backend, which should follow all the
existing rules with TTM_PAGE_FLAG_EXTERNAL, since it will need to handle
swapping itself, but with the above mapping restriction lifted.
v2(Christian):
- Don't OR together EXTERNAL and EXTERNAL_MAPPABLE in the definition
of EXTERNAL_MAPPABLE, just leave it the caller to handle this
correctly, otherwise we might encounter subtle issues.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132629.353541-3-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
It covers more than just ttm_bo_type_sg usage, like with say dma-buf,
since one other user is userptr in amdgpu, and in the future we might
have some more. Hence EXTERNAL is likely a more suitable name.
v2(Christian):
- Rename these to TTM_TT_FLAGS_*
- Fix up all the holes in the flag values
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132629.353541-1-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Now that setting page->index shouldn't be needed anymore, we are just
left with setting page->mapping, and here it looks like amdgpu is the
only user, where pointing the page->mapping at the dev_mapping is used
to verify that the pages do indeed belong to the device, if userspace
later tries to touch them.
v2(Christian):
- Drop the functions altogether and just inline modifying
the page->mapping
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927114114.152310-3-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
In commit:
commit 58aa6622d3
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri Jan 3 11:47:23 2014 +0100
drm/ttm: Correctly set page mapping and -index members
we started setting the page->mapping and page->index to point to the
virtual address space, if the pages were faulted with TTM. Apparently
this was needed for core-mm to able to reverse lookup the virtual
address given the struct page, and potentially unmap it from the page
tables. However as pointed out by Thomas, since we are now using
PFN_MAP, instead of say PFN_MIXED, this should no longer be the case.
There was also apparently some usecase in vmwgfx which needed this for
dirty tracking, but that also doesn't appear to be the case anymore, as
pointed out by Thomas.
We still need keep the page->mapping for now, since that is still needed
for different reasons, but we try to address that in the next patch.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927114114.152310-2-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
In commit:
commit 09ac4fcb3f
Author: Felix Kuehling <Felix.Kuehling@amd.com>
Date: Thu Jul 13 17:01:16 2017 -0400
drm/ttm: Implement vm_operations_struct.access v2
we added the vm_access hook, where we also directly call tt_swapin for
some reason. If something is swapped-out then the ttm_tt must also be
unpopulated, and since access_kmap should also call tt_populate, if
needed, then swapping-in will already be handled there.
If anything, calling tt_swapin directly here would likely always fail
since the tt->pages won't yet be populated, or worse since the tt->pages
array is never actually cleared in unpopulate this might lead to a nasty
uaf.
Fixes: 09ac4fcb3f ("drm/ttm: Implement vm_operations_struct.access v2")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927114114.152310-1-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Similar to DRM_VMW_EVENT_FENCE_SIGNALED. Sends a pollable event
to the DRM file descriptor when a fence on a specific ring is
signaled.
One difference is the event is not exposed via the UAPI -- this is
because host responses are on a shared memory buffer of type
BLOB_MEM_GUEST [this is the common way to receive responses with
virtgpu]. As such, there is no context specific read(..)
implementation either -- just a poll(..) implementation.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Nicholas Verne <nverne@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-12-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For the Sommelier guest Wayland proxy, it's desirable for the
DRM fd to be pollable in response to an host compositor event.
This can also be used by the 3D driver to poll events on a CPU
timeline.
This enables the DRM fd associated with a particular 3D context
to be polled independent of KMS events. The parameter
VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK specifies the pollable
rings.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Nicholas Verne <nverne@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-11-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We don't want fences from different 3D contexts (virgl, gfxstream,
venus) to be on the same timeline. With explicit context creation,
we can specify the number of ring each context wants.
Execbuffer can specify which ring to use.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Lingfeng Yang <lfy@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-10-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The plumbing is all here to do this. Since we always use the
default fence context when allocating a fence, this makes no
functional difference.
We can't process just the largest fence id anymore, since it's
it's associated with different timelines. It's fine for fence_id
260 to signal before 259. As such, process each fence_id
individually.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Lingfeng Yang <lfy@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-9-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These were defined in the previous commit. We'll need these
parameters when allocating a dma_fence. The use case for this
is multiple synchronizations timelines.
The maximum number of timelines per 3D instance will be 32. Usually,
only 2 are needed -- one for CPU commands, and another for GPU
commands.
As such, we'll need to specify these parameters when allocating a
dma_fence.
vgdev->fence_drv.context is the "default" fence context for 2D mode
and old userspace.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Lingfeng Yang <lfy@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-8-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Each fence should be associated with a [fence ID, fence_context,
seqno]. The seqno number is just the fence id.
To get the fence context, we add the ring_idx to the 3D context's
base_fence_ctx. The ring_idx is between 0 and 31, inclusive.
Each 3D context will have it's own base_fence_ctx. The ring_idx will
be emitted to host userspace, when emit_fence_info is true.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Lingfeng Yang <lfy@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-7-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This implements the context initialization ioctl. A list of params
is passed in by userspace, and kernel driver validates them. The
only currently supported param is VIRTGPU_CONTEXT_PARAM_CAPSET_ID.
If the context has already been initialized, -EEXIST is returned.
This happens after Linux userspace does dumb_create + followed by
opening the Mesa virgl driver with the same virtgpu instance.
However, for most applications, 3D contexts will be explicitly
initialized when the feature is available.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Acked-by: Lingfeng Yang <lfy@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-6-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The valid capability IDs are between 1 to 63, and defined in the
virtio gpu spec. This is used for error checking the subsequent
patches. We're currently only using 2 capability IDs, so this
should be plenty for the immediate future.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Lingfeng Yang <lfy@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210921232024.817-4-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This moves one wrapper from the pm->display side, and creates
wrappers for all the others, this should simplify things later.
One thing to note is that the code checks the existence of some
of these ptrs, so the wrappers are a bit complicated by that.
Suggested by Jani.
v2: fixup warnings in wrong place error.
v3 by Jani: fix intel_compute_global_watermarks() return value check
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee2760c45896568c9dd9114a575509619bd44ef2.1632869550.git.jani.nikula@intel.com
In the s2idle stress test sdma resume fail occasionally,in the
failed case GPU is in the gfxoff state.This issue may introduce
by firmware miss handle doorbell S/R and now temporary fix the issue
by forcing exit gfxoff for sdma resume.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
On GFX9+, format modifiers are always enabled and ensure the
frame-buffers can be scanned out at ADDFB2 time.
On GFX8-, format modifiers are not supported and no other check
is performed. This means ADDFB2 IOCTLs will succeed even if the
tiling isn't supported for scan-out, and will result in garbage
displayed on screen [1].
Fix this by adding a check for tiling flags for GFX8 and older.
The check is taken from radeonsi in Mesa (see how is_displayable
is populated in gfx6_compute_surface).
Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel)
[1]: https://github.com/swaywm/wlroots/issues/3185
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path
[how]
pass in pci deviceid, and break once dal_version initialized.
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Stack variable params.backlight_ramping_override is uninitialized, so it
contains junk data
[How]
Initialize the variable to false
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
didn't read the value of mmCP_HQD_QUANTUM from correct
register offset
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
ASSR is dependent on Signed PSP Verstage to enable Content
Protection for eDP panels. Unsigned PSP verstage is used
during development phase causing ASSR to FAIL.
As a result, link training is performed with
DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for
eDP panels that causes display flicker on some panels.
[How]
- Do not change panel mode, if ASSR is disabled
- Just report and continue to perform eDP link training
with right settings further.
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload.
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for these two panels fits in nicely with the existing
panel-boe-tv101wum-nl6 driver as suggested by Sam [1].
This is an incell IC, TDDI use time division multiplexing.
Init code effect touch sensing.The main things
we needed to handle were:
a) These panels need slightly longer delays in two places. Since these
new delays aren't much longer, let's just unconditionally increase
them for the driver.
b) These panel use video BURST mode
[1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[dianders: fix whitespace issues reported by dim apply-branch]
[dianders: inx,=>innolux,]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
The auo,b101uan08.3 panel (already supported by this driver) has
a 3.3V rail that needs to be turned on. For previous users of
this panel this voltage was directly output by pmic. On a new
user (the not-yet-upstream sc7180-trogdor-mrbland board) we need
to turn the 3.3V rail on. Add support in the driver for this.
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-2-yangcong5@huaqin.corp-partner.google.com
[Why]
DC should be used in place of DAL in
upstream.
[How]
Replace dal with dc in function names.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fixes to backlight, LUT, PPS, MST
- Use correct vpg for 128b/132b encoding
- Improved logging for VCP
- Replace referral of dal with dc
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change is needed for DCN2 to make use of the immediate_update
flag. With this flag, update to PPS will be immediate, rather than
always taking place on dig_update signal.
[How]
Set AFMT_GENERIC7_FRAME/IMMEDIATE_UPDATE bits depending on flag
value.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Ilya <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MST streams share the same link and should share the same encoder.
The current availability check may erroneously determine that an
encoder is unavailable for MST streams.
[How]
When checking for link encoder availability, check if an encoder
in use shares a link with the stream for which the availability
check is being conducted. If the link is shared, then the link
encoder should be shared too and will be deemed available.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Link encoder in the link could be null for certain links.
[How]
If link encoder in the link is null then get the link encoder
from the stream.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Unify the code which handles the conversion between hw lane setting
and dpcd lane setting.
v2: squash in unused variable fixes (Alex)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To support per lane lane setting adjustment, we need to change cur_lane_setting
to an array one for each lane as the first step.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Requested feature to assist with Thermal, Acoustic, Power, and
Performance tuning.
[How]
Add a debug field that will override calculated minimum DRAM clock,
if the debug value is larger than the calculate value.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To prevent unnecessary wake up of DMCUB when ABM is enabled without PSR
enabled, driver will notify DMCUB to stop ABM's vertical interrupts
if vsync is disabled and steady state is reached.
[How]
Send inbox message to notify ABM pause based on vsync on/off
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
AFMT is unused for DP audio, so powering it on for DP is unnecessary.
[HOW]
APG block should be powered down instead, however HW defaults to shutdown
state when not enabled so no further work is required.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
128b/132b uses the vpg instance assigned to hpo dp stream encoder.
The current vpg used is assigned to dio stream encoder.
This is incorrect and cause display black screen because the
actual vpg is powered off.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
didn't read the value of mmCP_HQD_QUANTUM from correct
register offset
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In ras poison mode, umc uncorrectable error will be ignored until
the corrupted data consumed by another ras module (such as gfx, sdma).
v2: update the debug message and replace dev_warn with dev_info.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add RAS poison supported flag and tell PSP RAS TA about the info.
v2: rename poison mode to poison supported, we can also disable poison
mode even we support it.
print value of poison supported if ras feature enablement fails.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated invoke to use new common TA structure similarily to load/unload.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ASSR is dependent on Signed PSP Verstage to enable Content
Protection for eDP panels. Unsigned PSP verstage is used
during development phase causing ASSR to FAIL.
As a result, link training is performed with
DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for
eDP panels that causes display flicker on some panels.
[How]
- Do not change panel mode, if ASSR is disabled
- Just report and continue to perform eDP link training
with right settings further.
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload.
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The drm_helper_hpd_irq_event() documentation states that this function
is "useful for drivers which can't or don't track hotplug interrupts for
each connector." and that "Drivers which support hotplug interrupts for
each connector individually and which have a more fine-grained detect
logic should bypass this code and directly call
drm_kms_helper_hotplug_event()". This is thus what we ended-up doing.
However, what this actually means, and is further explained in the
drm_kms_helper_hotplug_event() documentation, is that
drm_kms_helper_hotplug_event() should be called by drivers that can
track the connection status change, and if it has changed we should call
that function.
This underlying expectation we failed to provide is that the caller of
drm_kms_helper_hotplug_event() should call drm_helper_probe_detect() to
probe the new status of the connector.
Since we didn't do it, it meant that even though we were sending the
notification to user-space and the DRM clients that something changed we
never probed or updated our internal connector status ourselves.
This went mostly unnoticed since the detect callback usually doesn't
have any side-effect. Also, if we were using the DRM fbdev emulation
(which is a DRM client), or any user-space application that can deal
with hotplug events, chances are they would react to the hotplug event
by probing the connector status eventually.
However, now that we have to enable the scrambler in detect() if it was
enabled it has a side effect, and an application such as Kodi or
modetest doesn't deal with hotplug events. This resulted with a black
screen when Kodi or modetest was running when a screen was disconnected
and then reconnected, or switched off and on.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914101724.266570-3-maxime@cerno.tech
The drm_helper_hpd_irq_event() function is iterating over all the
connectors when an hotplug event is detected.
During that iteration, it will call each connector detect function and
figure out if its status changed.
Finally, if any connector changed, it will notify the user-space and the
clients that something changed on the DRM device.
This is supposed to be used for drivers that don't have a hotplug
interrupt for individual connectors. However, drivers that can use an
interrupt for a single connector are left in the dust and can either
reimplement the logic used during the iteration for each connector or
use that helper and iterate over all connectors all the time.
Since both are suboptimal, let's create a helper that will only perform
the status detection on a single connector.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914101724.266570-2-maxime@cerno.tech
The right parameter that selects second dsc engine is dsc_split.
Hence use dsc_split instead of slice_count while selecting the
cdclk in order to accommodate 1ppc limitaion of vdsc.
Fixes: fe01883fdc ("drm/i915: Get proper min cdclk if vDSC enabled")
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915054338.29869-1-vandita.kulkarni@intel.com
This contains a fix for an UAPI error that happens when no IOMMU is
enabled, as well as a few build warning fixes and plugs a potential
memory leak.
-----BEGIN PGP SIGNATURE-----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=FObG
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.15-rc3' of ssh://git.freedesktop.org/git/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.15-rc3
This contains a fix for an UAPI error that happens when no IOMMU is
enabled, as well as a few build warning fixes and plugs a potential
memory leak.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924143537.1341882-1-thierry.reding@gmail.com
MSM is one of the few drivers which won't even compile
test on !ARM platforms.
Looking into this a bit more it turned out that there is
actually not that much missing to at least let the driver
compile on x86 as well.
So this patch replaces the use of phys_to_page() with the
open coded version and provides a dummy for of_drm_find_bridge().
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924071759.22659-2-christian.koenig@amd.com
Seems to fix some object-debug splat which appeared while debugging
something unrelated.
v2: s/guc_blocked/guc_state.blocked/
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924144646.4096402-1-matthew.auld@intel.com
Commit 989634fb49 ("drm/i915/audio: set HDA link parameters in
driver") makes HDMI audio on Lenovo P350 disappear.
So in addition to TGL, extend the logic to RKL to use BIOS provided
value to fix the regression.
Fixes: 989634fb49 ("drm/i915/audio: set HDA link parameters in driver")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906041300.508458-1-kai.heng.feng@canonical.com
In commit 4e5c8a99e1 ("drm/i915: Drop i915_request.lock requirement
for intel_rps_boost()"), we decoupled the rps worker from the pm so
that we could avoid the synchronization penalty which makes the
assertion liable to run too early. Which makes warning invalid hence
removed.
Fixes: 4e5c8a99e1 ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com
(cherry picked from commit a837a06863)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we blow up in trace_dma_fence_init, when calling into
get_driver_name or get_timeline_name, since both the engine and context
might be NULL(or contain some garbage address) in the case of newly
allocated slab objects via the request ctor. Note that we also use
SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately
freed, but delay freeing the underlying page by an RCU grace period.
With this scheme requests can be re-allocated, at the same time as they
are also being read by some lockless RCU lookup mechanism.
In the ctor case, which is only called for new slab objects(i.e allocate
new page and call the ctor for each object) it's safe to reset the
context/engine prior to calling into dma_fence_init, since we can be
certain that no one is doing an RCU lookup which might depend on peeking
at the engine/context, like in active_engine(), since the object can't
yet be externally visible.
In the recycled case(which might also be externally visible) the request
refcount always transitions from 0->1 after we set the context/engine
etc, which should ensure it's valid to dereference the engine for
example, when doing an RCU list-walk, so long as we can also increment
the refcount first. If the refcount is already zero, then the request is
considered complete/released. If it's non-zero, then the request might
be in the process of being re-allocated, or potentially still in flight,
however after successfully incrementing the refcount, it's possible to
carefully inspect the request state, to determine if the request is
still what we were looking for. Note that all externally visible
requests returned to the cache must have zero refcount.
One possible fix then is to move dma_fence_init out from the request
ctor. Originally this was how it was done, but it was moved in:
commit 855e39e65c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Feb 3 09:41:48 2020 +0000
drm/i915: Initialise basic fence before acquiring seqno
where it looks like intel_timeline_get_seqno() relied on some of the
rq->fence state, but that is no longer the case since:
commit 12ca695d2c
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Tue Mar 23 16:49:50 2021 +0100
drm/i915: Do not share hwsp across contexts any more, v8.
intel_timeline_get_seqno() could also be cleaned up slightly by dropping
the request argument.
Moving dma_fence_init back out of the ctor, should ensure we have enough
of the request initialised in case of trace_dma_fence_init.
Functionally this should be the same, and is effectively what we were
already open coding before, except now we also assign the fence->lock
and fence->ops, but since these are invariant for recycled
requests(which might be externally visible), and will therefore already
hold the same value, it shouldn't matter.
An alternative fix, since we don't yet have a fully initialised request
when in the ctor, is just setting the context/engine as NULL, but this
does require adding some extra handling in get_driver_name etc.
v2(Daniel):
- Try to make the commit message less confusing
Fixes: 855e39e65c ("drm/i915: Initialise basic fence before acquiring seqno")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Michael Mason <michael.w.mason@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921134202.3803151-1-matthew.auld@intel.com
(cherry picked from commit be988eaee1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Nested grids in grid-table cells are not specified as proper ReST
constructs.
Commit 572f2a5cd9 ("drm/i915/guc: Update firmware to v62.0.0")
added a couple of kerneldoc tables of the form:
+---+-------+------------------------------------------------------+
| 1 | 31:0 | +------------------------------------------------+ |
+---+-------+ | | |
|...| | | Embedded `HXG Message`_ | |
+---+-------+ | | |
| n | 31:0 | +------------------------------------------------+ |
+---+-------+------------------------------------------------------+
For "make htmldocs", they happen to work as one might expect,
but they are incompatible with "make latexdocs" and "make pdfdocs",
and cause the generated gpu.tex file to become incomplete and
unbuildable by xelatex.
Restore the compatibility by removing those nested grids in the tables.
Size comparison of generated gpu.tex:
Sphinx 2.4.4 Sphinx 4.2.0
v5.14: 3238686 3841631
v5.15-rc1: 376270 432729
with this fix: 3377846 3998095
Fixes: 572f2a5cd9 ("drm/i915/guc: Update firmware to v62.0.0")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a227569-074f-c501-58bb-d0d8f60a8ae9@gmail.com
(cherry picked from commit 017792a041)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct drm32_mga_init around members chipset, sgram,
maccess, fb_cpp, front_offset, front_pitch, back_offset, back_pitch,
depth_cpp, depth_offset, depth_pitch, texture_offset, and texture_size,
so they can be referenced together. This will allow memcpy() and sizeof()
to more easily reason about sizes, improve readability, and avoid future
warnings about writing beyond the end of chipset.
"pahole" shows no size nor member offset changes to struct drm32_mga_init.
"objdump -d" shows no meaningful object code changes (i.e. only source
line number induced differences and optimizations).
Note that since this is a UAPI header, __struct_group() is used
directly.
Cc: David Airlie <airlied@linux.ie>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://lore.kernel.org/lkml/YQKa76A6XuFqgM03@phenom.ffwll.local
We currently do an explicit flush of the buffer pools within the call path
of drm_driver.release(); this removes all buffers, regardless of their age,
freeing the buffers' associated resources (objects, address space areas).
However there is other code that runs within the drm_driver.release() call
chain that expects objects and their associated address space areas have
already been flushed.
Since buffer pools auto-flush old buffers once per second in a worker
thread, there's a small window where if we remove the driver while there
are still objects in buffers with an age of less than one second, the
assumptions of the other release code may be violated.
By moving the flush to driver remove (which executes earlier via the
pci_driver.remove() flow) we're ensuring that all buffers are flushed and
their associated objects freed before some other code in
pci_driver.remove() flushes those objects so they are released before
_any_ code in drm_driver.release() that check completness of those
flushes executes.
v2: Reword commit description as suggested by Matt.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924163825.634606-1-janusz.krzysztofik@linux.intel.com
PTR_ERR() should access the value just tested by IS_ERR(),
otherwise the wrong error code will be returned.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: c2f17e60cb ("drm/gma500: Embed struct drm_device in struct drm_psb_private")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924094040.3631675-1-yangyingliang@huawei.com
MIPI-DSI devices need to call mipi_dsi_attach() when their probe is done
to attach against their host.
However, at removal or when an error occurs, that attachment needs to be
undone through a call to mipi_dsi_detach().
Let's create a device-managed variant of the attachment function that
will automatically detach the device at unbind.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-5-maxime@cerno.tech
Devices that take their data through the MIPI-DSI bus but are controlled
through a secondary bus like I2C have to register a secondary device on
the MIPI-DSI bus through the mipi_dsi_device_register_full() function.
At removal or when an error occurs, that device needs to be removed
through a call to mipi_dsi_device_unregister().
Let's create a device-managed variant of the registration function that
will automatically unregister the device at unbind.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-4-maxime@cerno.tech
Interactions between bridges, panels, MIPI-DSI host and the component
framework are not trivial and can lead to probing issues when
implementing a display driver. Let's document the various cases we need
too consider, and the solution to support all the cases.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-3-maxime@cerno.tech
The bridge documentation overview is quite packed already, and we'll add
some more documentation that isn't part of an overview at all.
Let's add some sections to the documentation to separate each bits.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-2-maxime@cerno.tech
In commit 4e5c8a99e1 ("drm/i915: Drop i915_request.lock requirement
for intel_rps_boost()"), we decoupled the rps worker from the pm so
that we could avoid the synchronization penalty which makes the
assertion liable to run too early. Which makes warning invalid hence
removed.
Fixes: 4e5c8a99e1 ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com
On FBC1 we can specify an arbitrary cfb stride. The hw will
simply throw away any compressed line that would exceed the
specified limit and keep using the uncompressed data instead.
Thus we can allow arbitrary compression limits.
The one thing we have to keep in mind though is that the cfb
stride is specified in units of 32B (gen2) or 64B (gen3+).
Fortunately X-tile is already 128B (gen2) or 512B (gen3+) wide
so as long as we limit outselves to the same 4x compression
limit that FBC2 has we are guaranteed to have a sufficiently
aligned cfb stride.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921152517.803-5-ville.syrjala@linux.intel.com
There's some kind of weird corner cases in FBC which requires
FBC segments to be separated by at least one extra cacheline.
Make sure that is present.
v2: Respin to fit in with skl_fbc_min_cfb_stride()
v3: Make it build
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921181245.15091-1-ville.syrjala@linux.intel.com
Apply the same 512 byte FBC segment alignment to glk+ as we use
on skl+. The only real difference is that we now have a dedicated
register for the FBC override stride. Not 100% sure which
platforms really need the 512B alignment, but it's easiest
to just do it on everything.
Also the hardware no longer seems to misclaculate the CFB stride
for linear, so we can omit the use of the override stride for
linear unless the stride is misaligned.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921152517.803-3-ville.syrjala@linux.intel.com
The code to calculate the cfb stride/size is a bit of mess.
The cfb size is getting calculated based purely on the plane
stride and plane height. That doesn't account for extra
alignment we want for the cfb stride. The gen9 override
stride OTOH is just calculated based on the plane width, and
it does try to make things more aligned but any extra alignment
added there is not considered in the cfb size calculations.
So not at all convinced this is working as intended. Additionally
the compression limit handling is split between the cfb allocation
code and g4x_dpfc_ctl_limit() (for the 16bpp case), which is just
confusing.
Let's streamline the whole thing:
- Start with the plane stride, convert that into cfb stride (cfb is
always 4 bytes per pixel). All the calculations will assume 1:1
compression limit since that will give us the max values, and we
don't yet know how much stolen memory we will be able to allocate
- Align the cfb stride to 512 bytes on modern platforms. This guarantees
the 4 line segment will be 512 byte aligned regardles of the final
compression limit we choose later. The 512 byte alignment for the
segment is required by at least some of the platforms, and just doing
it always seems like the easiest option
- Figure out if we need to use the override stride or not. For X-tiled
it's never needed since the plane stride is already 512 byte aligned,
for Y-tiled it will be needed if the plane stride is not a multiple
of 512 bytes, and for linear it's apparently always needed because the
hardware miscalculates the cfb stride as PLANE_STRIDE*512 instead of
the PLANE_STRIDE*64 that it use with linear.
- The cfb size will be calculated based on the aligned cfb stride to
guarantee we actually reserved enough stolen memory and the FBC hw
won't end up scribbling over whatever else is allocated in stolen
- The compression limit handling we just do fully in the cfb allocation
code to make things less confusing
v2: Write the min cfb segment stride calculation in a more
explicit way to make it clear what is going on
v3: Remeber to update fbc->limit when changing to 16bpp
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923042151.19052-1-ville.syrjala@linux.intel.com
In commit:
commit 1e6decf30a
Author: Hugh Dickins <hughd@google.com>
Date: Thu Sep 2 14:54:43 2021 -0700
shmem: shmem_writepage() split unlikely i915 THP
it looks THP + shmem_writeback was an unexpected combination, and ends up
hitting some BUG_ON, but it also looks like that is now fixed.
While the IGTs did eventually hit this(although not during pre-merge it
seems), it's likely worthwhile adding some explicit coverage for this
scenario in the shrink_thp selftest.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4166
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921142116.3807946-1-matthew.auld@intel.com
Currently we blow up in trace_dma_fence_init, when calling into
get_driver_name or get_timeline_name, since both the engine and context
might be NULL(or contain some garbage address) in the case of newly
allocated slab objects via the request ctor. Note that we also use
SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately
freed, but delay freeing the underlying page by an RCU grace period.
With this scheme requests can be re-allocated, at the same time as they
are also being read by some lockless RCU lookup mechanism.
In the ctor case, which is only called for new slab objects(i.e allocate
new page and call the ctor for each object) it's safe to reset the
context/engine prior to calling into dma_fence_init, since we can be
certain that no one is doing an RCU lookup which might depend on peeking
at the engine/context, like in active_engine(), since the object can't
yet be externally visible.
In the recycled case(which might also be externally visible) the request
refcount always transitions from 0->1 after we set the context/engine
etc, which should ensure it's valid to dereference the engine for
example, when doing an RCU list-walk, so long as we can also increment
the refcount first. If the refcount is already zero, then the request is
considered complete/released. If it's non-zero, then the request might
be in the process of being re-allocated, or potentially still in flight,
however after successfully incrementing the refcount, it's possible to
carefully inspect the request state, to determine if the request is
still what we were looking for. Note that all externally visible
requests returned to the cache must have zero refcount.
One possible fix then is to move dma_fence_init out from the request
ctor. Originally this was how it was done, but it was moved in:
commit 855e39e65c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Feb 3 09:41:48 2020 +0000
drm/i915: Initialise basic fence before acquiring seqno
where it looks like intel_timeline_get_seqno() relied on some of the
rq->fence state, but that is no longer the case since:
commit 12ca695d2c
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Tue Mar 23 16:49:50 2021 +0100
drm/i915: Do not share hwsp across contexts any more, v8.
intel_timeline_get_seqno() could also be cleaned up slightly by dropping
the request argument.
Moving dma_fence_init back out of the ctor, should ensure we have enough
of the request initialised in case of trace_dma_fence_init.
Functionally this should be the same, and is effectively what we were
already open coding before, except now we also assign the fence->lock
and fence->ops, but since these are invariant for recycled
requests(which might be externally visible), and will therefore already
hold the same value, it shouldn't matter.
An alternative fix, since we don't yet have a fully initialised request
when in the ctor, is just setting the context/engine as NULL, but this
does require adding some extra handling in get_driver_name etc.
v2(Daniel):
- Try to make the commit message less confusing
Fixes: 855e39e65c ("drm/i915: Initialise basic fence before acquiring seqno")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Michael Mason <michael.w.mason@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921134202.3803151-1-matthew.auld@intel.com
We really only need memcpy restore for objects that affect the
operability of the migrate context. That is, primarily the page-table
objects of the migrate VM.
Add an object flag, I915_BO_ALLOC_PM_EARLY for objects that need early
restores using memcpy and a way to assign LMEM page-table object flags
to be used by the vms.
Restore objects without this flag with the gpu blitter and only objects
carrying the flag using TTM memcpy.
Initially mark the migrate, gt, gtt and vgpu vms to use this flag, and
defer for a later audit which vms actually need it. Most importantly, user-
allocated vms with pinned page-table objects can be restored using the
blitter.
Performance-wise memcpy restore is probably as fast as gpu restore if not
faster, but using gpu restore will help tackling future restrictions in
mappable LMEM size.
v4:
- Don't mark the aliasing ppgtt page table flags for early resume, but
rather the ggtt page table flags as intended. (Matthew Auld)
- The check for user buffer objects during early resume is pointless, since
they are never marked I915_BO_ALLOC_PM_EARLY. (Matthew Auld)
v5:
- Mark GuC LMEM objects with I915_BO_ALLOC_PM_EARLY to have them restored
before we fire up the migrate context.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-8-thomas.hellstrom@linux.intel.com
Pinned context images are now reset during resume. Don't back them up,
and assuming that rings can be assumed empty at suspend, don't back them
up either.
Introduce a new object flag, I915_BO_ALLOC_PM_VOLATILE meaning that an
object is allowed to lose its content on suspend.
v3:
- Slight documentation clarification (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-7-thomas.hellstrom@linux.intel.com
Pinned contexts, like the migrate contexts need reset after resume
since their context image may have been lost. Also the GuC needs to
register pinned contexts.
Add a list to struct intel_engine_cs where we add all pinned contexts on
creation, and traverse that list at resume time to reset the pinned
contexts.
This fixes the kms_pipe_crc_basic@suspend-read-crc-pipe-a selftest for now,
but proper LMEM backup / restore is needed for full suspend functionality.
However, note that even with full LMEM backup / restore it may be
desirable to keep the reset since backing up the migrate context images
must happen using memcpy() after the migrate context has become inactive,
and for performance- and other reasons we want to avoid memcpy() from
LMEM.
Also traverse the list at guc_init_lrc_mapping() calling
guc_kernel_context_pin() for the pinned contexts, like is already done
for the kernel context.
v2:
- Don't reset the contexts on each __engine_unpark() but rather at
resume time (Chris Wilson).
v3:
- Reset contexts in the engine sanitize callback. (Chris Wilson)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Brost Matthew <matthew.brost@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-6-thomas.hellstrom@linux.intel.com
Just evict unpinned objects to system. For pinned LMEM objects,
make a backup system object and blit the contents to that.
Backup is performed in three steps,
1: Opportunistically evict evictable objects using the gpu blitter.
2: After gt idle, evict evictable objects using the gpu blitter. This will
be modified in an upcoming patch to backup pinned objects that are not used
by the blitter itself.
3: Backup remaining pinned objects using memcpy.
Also move uC suspend to after 2) to make sure we have a functional GuC
during 2) if using GuC submission.
v2:
- Major refactor to make sure gem_exec_suspend@hang-SX subtests work, and
suspend / resume works with a slightly modified GuC submission enabling
patch series.
v3:
- Fix a potential use-after-free (Matthew Auld)
- Use i915_gem_object_create_shmem() instead of
i915_gem_object_create_region (Matthew Auld)
- Minor simplifications (Matthew Auld)
- Fix up kerneldoc for i195_ttm_restore_region().
- Final lmem_suspend() call moved to i915_gem_backup_suspend from
i915_gem_suspend_late, since the latter gets called at driver unload
and we don't unnecessarily want to run it at that time.
v4:
- Interface change of ttm- & lmem suspend / resume functions to use
flags rather than bools. (Matthew Auld)
- Completely drop the i915_gem_backup_suspend change (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-5-thomas.hellstrom@linux.intel.com
With GuC submission on DG1, the execution of the requests times out
for the gem_exec_suspend igt test case after executing around 800-900
of 1000 submitted requests.
Given the time we allow elsewhere for fences to signal (in the order of
seconds), increase the timeout before we mark the gt wedged and proceed.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-4-thomas.hellstrom@linux.intel.com
An upcoming common pattern is to traverse the region object list and
perform certain actions on all objects in a region. It's a little tricky
to get the list locking right, in particular since a gem object may
change region unless it's pinned or the object lock is held.
Define a function that does this for us and that takes an argument that
defines the action to be performed on each object.
v3:
- Improve structure documentation a bit (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-3-thomas.hellstrom@linux.intel.com
When backing up or restoring contents of pinned objects at suspend /
resume time we need to allocate a new object as the backup. Add a function
to facilitate copies between the two. Some data needs to be copied before
the migration context is ready for operation, so make sure we can
disable accelerated copies.
v2:
- Fix a missing return value check (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-2-thomas.hellstrom@linux.intel.com
Somehow we managed to invert the test for i915_gem_object_evictable(),
which causes a warning in DG1 BAT, igt@debugfs_test@read_all_entries.
Fix the lock check to only warn if the object *is* indeed evictable and
not protected from eviction by fences.
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: 91160c8398 ("drm/i915: Take pinning into account in __i915_gem_object_is_lmem")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922083807.888206-2-thomas.hellstrom@linux.intel.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Conversions to dev_err_probe() helper
- rockchip: Various build improvements, Use
DRM_BRIDGE_ATTACH_NO_CONNECTOR for LVDS and RGB
- panel: New panel-edp driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYUwwfAAKCRDj7w1vZxhR
xaiVAP0VRNLapEFzXiSKz4BC3lK1bxMW9EA41fw6QqOgc1W7dgD7BDc07sSR4i1h
1eAAYyuygCFH9JPaDmjTB4uH+X+QKgw=
=wh6l
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-09-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.15:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Conversions to dev_err_probe() helper
- rockchip: Various build improvements, Use
DRM_BRIDGE_ATTACH_NO_CONNECTOR for LVDS and RGB
- panel: New panel-edp driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923074522.zaja7mzxeimxf6g3@gilmour
Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.
It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.
BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718
WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
? memunmap_pages+0x360/0x360
svm_migrate_fini+0x2d/0x60 [amdgpu]
kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
drm_dev_release+0x20/0x40 [drm]
release_nodes+0x196/0x1e0
device_release_driver_internal+0x104/0x1d0
driver_detach+0x47/0x90
bus_remove_driver+0x7a/0xd0
pci_unregister_driver+0x3d/0x90
amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If svm migration init failed to create pgmap for device memory, set
pgmap type to 0 to disable device SVM support capability.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the current state as boot state during dpm initialization.
During the subsequent initialization, set_power_state gets called to
transition to the final power state. set_power_state refers to values
from the current state and without current state populated, it could
result in NULL pointer dereference.
For ex: on platforms where PCI speed change is supported through ACPI
ATCS method, the link speed of current state needs to be queried before
deciding on changing to final power state's link speed. The logic to query
ATCS-support was broken on certain platforms. The issue became visible
when broken ATCS-support logic got fixed with commit
f9b7f3703f ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)").
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Implement the first version of AUX support, which will be useful as
we expand the driver to support varied use cases.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: whitespace fixes reported by dim apply-branch]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921110556.v6.2.I1d6ea362dc76efa77cca2b46253d31b7651eaf17@changeid
Replace the direct i2c access (i2c_smbus_* functions) with regmap APIs,
which will simplify the future update on ps8640 driver.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: whitespace fixes reported by dim apply-branch]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921110556.v6.1.I2351df94f18d5d8debc22d4d100f36fac560409a@changeid
Update the current state as boot state during dpm initialization.
During the subsequent initialization, set_power_state gets called to
transition to the final power state. set_power_state refers to values
from the current state and without current state populated, it could
result in NULL pointer dereference.
For ex: on platforms where PCI speed change is supported through ACPI
ATCS method, the link speed of current state needs to be queried before
deciding on changing to final power state's link speed. The logic to query
ATCS-support was broken on certain platforms. The issue became visible
when broken ATCS-support logic got fixed with commit
f9b7f3703f ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)").
Bug:https://gitlab.freedesktop.org/drm/amd/-/issues/1698
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All code paths under the EAGAIN path in RAS late init are unused.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Explicity post warning if cmd is issued against unsupported IP
Update to latest RAS TA interface
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.
It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.
BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718
WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
? memunmap_pages+0x360/0x360
svm_migrate_fini+0x2d/0x60 [amdgpu]
kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
drm_dev_release+0x20/0x40 [drm]
release_nodes+0x196/0x1e0
device_release_driver_internal+0x104/0x1d0
driver_detach+0x47/0x90
bus_remove_driver+0x7a/0xd0
pci_unregister_driver+0x3d/0x90
amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If svm migration init failed to create pgmap for device memory, set
pgmap type to 0 to disable device SVM support capability.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update RAS infrastructure to support RAS query for MCA subblocks
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adev->rmmio is set to be NULL in amdgpu_device_unmap_mmio to prevent
access after pci_remove, however, in SRIOV case, amdgpu_virt_release_full_gpu
will still use adev->rmmio for access after amdgpu_device_unmap_mmio.
The patch is to move such SRIOV calling earlier to fini_early stage.
Fixes: 07775fc138 ("drm/amdgpu: Unmap all MMIO mappings")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For xnack off, restore work dma unmap previous system memory page, and
dma map the updated system memory page to update GPU mapping, this is
not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking.
prange->dma_addr store the VRAM page pfn after the range migrated to
VRAM, should not dma unmap VRAM page when updating GPU mapping or
remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM
page and error cases.
Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm
update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again
immediately after. This flag is used to know the type of page later to
dma unmapping system memory page.
Fixes: 1d5dbfe6c0 ("drm/amdkfd: classify and map mixed svm range pages in GPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SVM range may includes multiple VMAs with different vm_flags, if prange
page index is the last page of the VMA offset + npages, update GPU
mapping to create GPU page table with same VMA access permission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using an empty macro expansion as a conditional expression
produces a W=1 warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries':
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER");
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK");
| ^
Expand it to "do { } while (0)" instead to make the expression
more robust and avoid the warning.
Fixes: 56aca23093 ("drm/amd/display: Add AUX I2C tracing.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, the 32bit kernel build fails due to an incorrect string
format specifier. ARRAY_SIZE() returns size_t type as it uses sizeof().
However, we specify it in a string as %ld. This causes a compiler error
and causes the 32bit build to fail.
[How]
Change the %ld to %zu as size_t (which sizeof() returns) is an unsigned
integer data type. We use 'z' to ensure it also works with 64bit build.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hayden Goodfellow <Hayden.Goodfellow@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new DC version brings improvements in the following areas:
- New firmware version
- Fix HPD problems on DCN2
- Fix generic encoder problems and null deferences
- Adjust DCN301 watermark
- Rework dynamic bpp for DCN3x
- Improve link training fallback logic
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Links which are dynamically assigned link encoders have their link
encoder set to NULL.
[How]
Check that a pointer to a link_encoder object is non-NULL before using
it.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need a bit for x86 driver to enable a FW boot option for an upcoming
feature.
[How]
Added a bit in dmub_fw_boot_options for an upcoming feature.
Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIG mapping change is causing a blocker
[How]
Revert the change for now. We will re-implement it later.
Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used.
[How]
Make sure RDPCSPIPE registers are programmed correctly.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently causes visible flicker in some scenarios on OLED eDPs
Reviewed-by: Haonan Wang <haonan.wang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Screen sometimes would have artifacts or blink once at the time when bpp
is dynamically changed.
How:
1. Changed to update PPS infopacket in frame mode instead of immediate mode
since other updates for bpp change are double-buffered.
2. Changed double-buffering enablement programming for DCN30 as advised by
ASIC team
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If DCN30 watermark calc is used for DCN301, the calculated values are
wrong due to the data structure mismatch between DCN30 and DCN301.
However, using the original DCN301 watermark values causes underflow.
[how]
- Add DCN21-style watermark calculations
- Adjust DCN301 watermark values to remove the underflow
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lost power down on boot and power down for DCN3.
[How]
Added power down on boot and power down for DCN3.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect encoder assignments were being used while applying a new state
to hardware.
(1) When committing a new state to hardware requires resetting the
back-end, the encoder assignments of the current or old state should be
used when disabling the back-end; and the encoder assignments for the
next or new state should be used when re-enabling the back-end.
(2) Link training on hot plug could take over an encoder already in use
by another stream without first disabling it.
[How]
(1) Introduce a resource context 'link_enc_cfg_context' which includes:
- a mode to indicate when transitioning from current to next state.
- transient encoder assignments to use during this state transition.
Update the encoder configuration interface to respond to queries about
encoder assignment based on the mode of operation.
(2) Check if an encoder is already in use before attempting to perform
link training on hot plug.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Trying to enable multiple displays simultaneously exposed shortcomings
with the algorithm for dynamic link encoder assignment.
The main problems were:
- Assuming stream order remained constant across states would sometimes
lead to invalid DIG encoder assignment.
- Incorrect logic for deciding whether or not a DIG could support a
stream would also sometimes lead to invalid DIG encoder assignment.
- Changes in encoder assignment were wholesale while updating of the
pipe backend is incremental. This would lead to the hardware state not
matching the software state even with valid encoder assignments.
[How]
The following changes fix the identified problems.
- Use stream pointer rather than stream index to track streams across
states.
- Fix DIG compatibility check by examining the link signal type rather
than the stream signal type.
- Modify assignment algorithm to make incremental updates so software
and hardware states remain coherent.
Additionally:
- Add assertions and an encoder assignment validation function
link_enc_cfg_validate() to detect potential problems with encoder
assignment closer to their root cause.
- Reduce the frequency with which the assignment algorithm is executed.
It should not be necessary for fast state validation.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Link training should fail if stream bandwidth exceeds link bandwidth.
[How]
Correct fallback logic and use named variables to make intention clear.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG.
[How]
Fix DIG mapping.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD disable and enable sequences are not mutually exclusive on Linux.
For HPDs that spans under 1s (i.e. HPD low = 1s), part of the disable
sequence (specifically, a request to SMU to lower refclk) could come
right before the call to PHY enablement, causing DMUB to access an
irresponsive PHY and thus a hard hang on the system.
[How]
Disable 48mhz refclk off when there is any HPD status in connected state
for dcn20.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
With Werror enabled in the kernel we were failing the clang build since
dml21_ModeSupportAndSystemConfigurationFull's stack frame is 1064 when
building with clang, and exceeding the default 1024 stack frame limit.
The culprit seems to be the Pipe struct, so pull the relevant block
out into its own sub-function.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
dcn_bw_calc_rq_dlg_ttu uses a stack frame great than 1024. To solve this
we could allocate the rq_param, dlg_sys_param, and input structs
dynamically. Since this function is inside a kernel_fpu_begin()/end()
call we want to avoid memory allocation. Instead it's much
safer to pre-allocate these on the pipe_ctx.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 3fe617ccaf ("Enable '-Werror' by default for all kernel builds")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: Christian König <christian.koenig@amd.com>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Passing structs adds a lot of overhead. We don't ever want to pass
anything bigger than primitives by value.
This patch fixes these Coverity IDs:
Addresses-Coverity-ID: 1424031: ("Big parameter passed by value")
Addresses-Coverity-ID: 1424055: ("Big parameter passed by value")
Addresses-Coverity-ID: 1424072: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423779: ("Big parameter passed by value")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: Christian König <christian.koenig@amd.com>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Passing structs adds a lot of overhead. We don't ever want to pass
anything bigger than primitives by value.
This patch fixes these Coverity IDs:
Addresses-Coverity-ID: 1423868: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423870: ("Big parameter passed by value")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: Christian König <christian.koenig@amd.com>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This neither needs to be on the stack nor passed by value
to each function call. In fact, when building with clang
it seems to break the Linux's default 1024 byte stack
frame limit.
[How]
We can simply pass this as a const pointer.
This patch fixes these Coverity IDs
Addresses-Coverity-ID: 1424031: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423970: ("Big parameter passed by value")
Addresses-Coverity-ID: 1423941: ("Big parameter passed by value")
Addresses-Coverity-ID: 1451742: ("Big parameter passed by value")
Addresses-Coverity-ID: 1451887: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454146: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454152: ("Big parameter passed by value")
Addresses-Coverity-ID: 1454413: ("Big parameter passed by value")
Addresses-Coverity-ID: 1466144: ("Big parameter passed by value")
Addresses-Coverity-ID: 1487237: ("Big parameter passed by value")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 3fe617ccaf ("Enable '-Werror' by default for all kernel builds")
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: llvm@lists.linux.dev
Acked-by: Christian König <christian.koenig@amd.com>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For xnack off, restore work dma unmap previous system memory page, and
dma map the updated system memory page to update GPU mapping, this is
not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking.
prange->dma_addr store the VRAM page pfn after the range migrated to
VRAM, should not dma unmap VRAM page when updating GPU mapping or
remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM
page and error cases.
Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm
update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again
immediately after. This flag is used to know the type of page later to
dma unmapping system memory page.
Fixes: 1d5dbfe6c0 ("drm/amdkfd: classify and map mixed svm range pages in GPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SVM range may includes multiple VMAs with different vm_flags, if prange
page index is the last page of the VMA offset + npages, update GPU
mapping to create GPU page table with same VMA access permission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using an empty macro expansion as a conditional expression
produces a W=1 warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries':
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER");
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK");
| ^
Expand it to "do { } while (0)" instead to make the expression
more robust and avoid the warning.
Fixes: 56aca23093 ("drm/amd/display: Add AUX I2C tracing.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
When device goes into suspend and unplugged during it
then all HW programming during resume fails leading
to a bad SW during pci remove handling which follows.
Because device is first resumed and only later removed
we cannot rely on drm_dev_enter/exit here.
Fix:
Use a flag we use for PCIe error recovery to avoid
accessing registres. This allows to successfully complete
pm resume sequence and finish pci remove.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Crash:
BUG: unable to handle page fault for address: 00000000000010e1
RIP: 0010:vega10_power_gate_vce+0x26/0x50 [amdgpu]
Call Trace:
pp_set_powergating_by_smu+0x16a/0x2b0 [amdgpu]
amdgpu_dpm_set_powergating_by_smu+0x92/0xf0 [amdgpu]
amdgpu_dpm_enable_vce+0x2e/0xc0 [amdgpu]
vce_v4_0_hw_fini+0x95/0xa0 [amdgpu]
amdgpu_device_fini_hw+0x232/0x30d [amdgpu]
amdgpu_driver_unload_kms+0x5c/0x80 [amdgpu]
amdgpu_pci_remove+0x27/0x40 [amdgpu]
pci_device_remove+0x3e/0xb0
device_release_driver_internal+0x103/0x1d0
device_release_driver+0x12/0x20
pci_stop_bus_device+0x79/0xa0
pci_stop_and_remove_bus_device_locked+0x1b/0x30
remove_store+0x7b/0x90
dev_attr_store+0x17/0x30
sysfs_kf_write+0x4b/0x60
kernfs_fop_write_iter+0x151/0x1e0
Why:
VCE/UVD had dependency on SMC block for their suspend but
SMC block is the first to do HW fini due to some constraints
How:
Since the original patch was dealing with suspend issues
move the SMC block dependency back into suspend hooks as
was done in V1 of the original patches.
Keep flushing idle work both in suspend and HW fini seuqnces
since it's essential in both cases.
Fixes: 859e465927 ("drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend")
Fixes: bf756fb833 ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend")
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now we use same BO for create/destroy msg. So destroy will wait for the
fence returned from create to be signaled. The default timeout value in
destroy is 10ms which is too short.
Lets wait both fences with the specific timeout.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We hit soft hang while doing memory pressure test on one numa system.
After a qucik look, this is because kfd invalid/valid userptr memory
frequently with process_info lock hold.
Looks like update page table mapping use too much cpu time.
perf top says below,
75.81% [kernel] [k] __srcu_read_unlock
6.19% [amdgpu] [k] amdgpu_gmc_set_pte_pde
3.56% [kernel] [k] __srcu_read_lock
2.20% [amdgpu] [k] amdgpu_vm_cpu_update
2.20% [kernel] [k] __sg_page_iter_dma_next
2.15% [drm] [k] drm_dev_enter
1.70% [drm] [k] drm_prime_sg_to_dma_addr_array
1.18% [kernel] [k] __sg_alloc_table_from_pages
1.09% [drm] [k] drm_dev_exit
So move drm_dev_enter/exit outside gmc code, instead let caller do it.
They are gart_unbind, gart_map, vm_clear_bo, vm_update_pdes and
gmc_init_pdb0. vm_bo_update_mapping already calls it.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
DC core is being released from DM before it's referenced
from hpd_rx wq destruction code.
How: Move hpd_rx destruction before DC core destruction.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some games, ie. Doom Eternal, present from compute following compute
post-fx and would benefit from having DCC image stores available.
DCN on gfx10_3 doesn't need INDEPENDENT_128B_BLOCKS = 0 so we can expose
these modifiers capable of DCC image stores.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds the missing logic to set the correct value of dcc_ind_blk for this tiling version.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need to do this workaround if we start setting this value when we fill the plane attributes.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't populate the read-only array encoded_lanes on the stack but instead it
static. Also makes the object code smaller by 97 bytes:
Before:
text data bss dec hex filename
38899 8064 0 46963 b773 ./drivers/gpu/drm/radeon/r600_dpm.o
After:
text data bss dec hex filename
38738 8128 0 46866 b712 ./drivers/gpu/drm/radeon/r600_dpm.o
(gcc version 11.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PSP TA unload function to use PSP TA context as input argument.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update asd_context structure and add asd_initialize function to
conform ASD header/loading to generic TA systems.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The "base_addr_is_mc_addr" field was added for dcn3.1 support but
pa_config was never updated to set it to false.
Uninitialized memory causes it to be set to true which results in
address mistranslation and white screen.
[How]
Use memset to ensure all fields are initialized to 0 by default.
Fixes: 64b1d0e8d5 ("drm/amd/display: Add DCN3.1 HWSEQ")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.
Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the user cannot do anything about the unsupported Trusted Memory Zone
(TMZ) feature, do not warn about it, but make it informational, so
demote the log level from warning to info.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was unusual; normally, inline functions are declared static as
well, and defined in a header file if used by multiple compilation
units. The latter would be more involved in this case, so just drop
the inline declaration for now.
Fixes compile failure building for ppc64le on RHEL 8:
In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32,
from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call
to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available
90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here
1985 | max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count();
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: c84d46707e "drm/amdgpu: validate bad page threshold in ras(v3)"
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass drm dev directly as rdev->ddev gets initialized later on
at radeon_device_init().
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current RUNPM mechanism relies on PMFW to master the timing for BACO
in/exit. And that needs cooperation from sound driver for dstate
change notification for function 1(audio). Otherwise(on sound driver
missing), BACO cannot be kicked in correctly and hang will be observed
on RUNPM exit.
By switching back to legacy message way on sound driver missing,
we are able to fix the runpm hang observed for the scenario below:
amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-and-tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSR always had a requirement to only be enabled if there is active
planes but not following that never caused any issues.
But that changes in Alderlake-P, leaving PSR enabled without
active planes causes transcoder/port underruns.
Similar behavior was fixed during the pipe disable sequence by
commit 84030adb9e ("drm/i915/display: Disable audio, DRRS and PSR before planes").
intel_dp_compute_psr_vsc_sdp() had to move from
intel_psr_enable_locked() to intel_psr_compute_config() because we
need to be able to disable/enable PSR from atomic states without
connector and encoder state.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-3-jose.souza@intel.com
We were not completely following the selective fetch programming
sequence, here some things we were doing wrong:
- not programming plane selective fetch a PSR2_MAN_TRK_CTL registers
when doing a modeset
- programming PSR2_MAN_TRK_CTL out of vblank
With this changes the last remainig underrun found in Alderlake-P is
fixed.
Bspec: 55229
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-2-jose.souza@intel.com
Specification asks for DC_STATE_DEBUG_MASK_CORES to be set for all
platforms that supports DMC, not only for geminilake and broxton.
While at is also taking the oportunity to simply the code.
BSpec: 7402
BSpec: 49436
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-1-jose.souza@intel.com
Nested grids in grid-table cells are not specified as proper ReST
constructs.
Commit 572f2a5cd9 ("drm/i915/guc: Update firmware to v62.0.0")
added a couple of kerneldoc tables of the form:
+---+-------+------------------------------------------------------+
| 1 | 31:0 | +------------------------------------------------+ |
+---+-------+ | | |
|...| | | Embedded `HXG Message`_ | |
+---+-------+ | | |
| n | 31:0 | +------------------------------------------------+ |
+---+-------+------------------------------------------------------+
For "make htmldocs", they happen to work as one might expect,
but they are incompatible with "make latexdocs" and "make pdfdocs",
and cause the generated gpu.tex file to become incomplete and
unbuildable by xelatex.
Restore the compatibility by removing those nested grids in the tables.
Size comparison of generated gpu.tex:
Sphinx 2.4.4 Sphinx 4.2.0
v5.14: 3238686 3841631
v5.15-rc1: 376270 432729
with this fix: 3377846 3998095
Fixes: 572f2a5cd9 ("drm/i915/guc: Update firmware to v62.0.0")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a227569-074f-c501-58bb-d0d8f60a8ae9@gmail.com
Add support for remapping CCS FBs on ADL-P to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.
We can only remap the tiles on the main surface, not the tiles on the
CCS surface, so userspace has to generate the CCS surface aligning to
the POT size padded main surface stride (by programming the AUX
pagetable accordingly). For the required AUX pagetable setup, this
requires that either the main surface stride is 8 tiles or that the
stride is 16 tiles aligned (= 64 kbytes, the area mapped by one AUX
PTE).
v2:
- Init intel_remapped_info::plane_alignment only for remapped views and
do this from intel_fb_view_init().
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-6-imre.deak@intel.com
With the recent refactor of the uncore mmio handling, all
forcewake-based platforms (i.e., graphics version 6 and beyond) now use
the 'fwtable' read handlers. Let's pull the assignment out of the
per-platform if/else ladder to make this more obvious.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923003029.2194375-1-matthew.d.roper@intel.com
Atm the DPT object can accommodate only one VMA, so the VMA offset will
be always 0. Add an assert for this.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-4-imre.deak@intel.com
At the moment CCS FB strides must be power-of-two sized, but a follow-up
change will add support remapping these FBs, allowing the FB passed in
by userspace to have a non-POT sized stride. For these remapped FBs we
can only remap the main surface, not the CCS surface. This means that
userspace has to always generate the CCS surface aligning to the POT
stride padded main surface (by setting up the CCS AUX pagetables
accordingly). Adjust the CCS surface stride check to enforce this.
No functional change.
v2:
- Fix the gen12_ccs_aux_stride() is not static sparse warning.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-3-imre.deak@intel.com
The tile size for all surface types is 4 kbyte (or 2 kbyte on old
platforms), with the exception of the TGL/ADL CCS surface where the tile
size is 64 bytes. To be able to remap CCS FBs the CCS surface tile needs
to be defined as 4 kbyte as well (the granularity of GTT pages in a
remapped view).
The only place using the dimension of the 64 byte CCS area is the initial
check for the main vs. CCS plane origin coordinate match. To prepare for
adding support for remapping CCS FBs let's call the 64 byte CCS area a
'tile block' and add a helper to retrieve the dimensions for it.
No functional change.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-2-imre.deak@intel.com
Embed struct drm_device in struct drm_psb_private. Replace the use
of dev_private by an upcast operation. Switch to managed release of
struct drm_psb_private.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920141051.30988-4-tzimmermann@suse.de
Replace most references to struct drm_device.dev_private with the new
helper function to_drm_psb_private(). The only references left are in
assignments and the helper itself.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920141051.30988-2-tzimmermann@suse.de
Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with
the rsp managed functions. Allows for removing the cleanup code
for memory management
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-5-tzimmermann@suse.de
Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with
the rsp managed functions. Allows for removing the cleanup code
for memory management
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-4-tzimmermann@suse.de
The intention was to check whether the primary plane is enabled
without any sprites planes being enabled. Instead we ended up checking
whether just any one of the planes is enabled. g4x isn't vlv/chv and
cxsr only works with the primary plane. Fix the check to examine the
bitmask of active planes rather than the number of bits set in said
bitmask.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
By depending on devm_drm_panel_bridge_add(), devm_drm_of_get_bridge()
introduces a circular dependency between the modules drm (where
devm_drm_of_get_bridge() ends up) and drm_kms_helper (where
devm_drm_panel_bridge_add() is).
Fix this by moving devm_drm_of_get_bridge() to bridge/panel.c and thus
drm_kms_helper.
Fixes: 87ea95808d ("drm/bridge: Add a function to abstract away panels")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917180925.2602266-1-maxime@cerno.tech
It is not very useful to have code which tries to report a rapidly
transient state which will not report anything majority of the time,
especially since it is currently only used from
<debugfs>/i915_gem_framebuffers.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915114153.951670-1-tvrtko.ursulin@linux.intel.com
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: Avoid a warning with some allocations, Remove
DMA_FENCE_TRACE macros
Core Changes:
- bridge: New helper to git rid of panels in drivers
- fence: Improve dma_fence_add_callback documentation, Improve
dma_fence_ops->wait documentation
- ioctl: Unexport drm_ioctl_permit
- lease: Documentation improvements
- fourcc: Add new macro to determine the modifier vendor
- quirks: Add the Steam Deck, Chuwi HiBook, Chuwi Hi10 Pro, Samsung
Galaxy Book 10.6, KD Kurio Smart C15200 2-in-1, Lenovo Ideapad D330
- resv: Improve the documentation
- shmem-helpers: Allocate WC pages on x86, Switch to vmf_insert_pfn
- sched: Fix for a timer being canceled too soon, Avoid null pointer
derefence if the fence is null in drm_sched_fence_free, Convert
drivers to rely on its dependency tracking
- ttm: Switch to kerneldoc, new helper to clear all DMA mappings, pool
shrinker optitimization, Remove ttm_tt_destroy_common, Fix for
unbinding on multiple drivers
Driver Changes:
- bochs: New PCI IDs
- msm: Fence ordering impromevemnts
- stm: Add layer alpha support, zpos
- v3d: Fix for a Vulkan CTS failure
- vc4: Conversion to the new bridge helpers
- vgem: Use shmem helpers
- virtio: Support mapping exported vram
- zte: Remove obsolete driver
- bridge: Probe improvements for it66121, enable DSI EOTP for anx7625,
errors propagation improvements for anx7625
- panels: 60fps mode for otm8009a, New driver for Samsung S6D27A1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYULyqgAKCRDj7w1vZxhR
xVR1AP96dB3rfB0uIEvujMROBqupaKbYvP/7qilfMGIwLotDqQD/RKNB+EAaoHtT
hRA7zmz7kwYA/l8PihmF1zoFddX21gA=
=nFnK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-09-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: Avoid a warning with some allocations, Remove
DMA_FENCE_TRACE macros
Core Changes:
- bridge: New helper to git rid of panels in drivers
- fence: Improve dma_fence_add_callback documentation, Improve
dma_fence_ops->wait documentation
- ioctl: Unexport drm_ioctl_permit
- lease: Documentation improvements
- fourcc: Add new macro to determine the modifier vendor
- quirks: Add the Steam Deck, Chuwi HiBook, Chuwi Hi10 Pro, Samsung
Galaxy Book 10.6, KD Kurio Smart C15200 2-in-1, Lenovo Ideapad D330
- resv: Improve the documentation
- shmem-helpers: Allocate WC pages on x86, Switch to vmf_insert_pfn
- sched: Fix for a timer being canceled too soon, Avoid null pointer
derefence if the fence is null in drm_sched_fence_free, Convert
drivers to rely on its dependency tracking
- ttm: Switch to kerneldoc, new helper to clear all DMA mappings, pool
shrinker optitimization, Remove ttm_tt_destroy_common, Fix for
unbinding on multiple drivers
Driver Changes:
- bochs: New PCI IDs
- msm: Fence ordering impromevemnts
- stm: Add layer alpha support, zpos
- v3d: Fix for a Vulkan CTS failure
- vc4: Conversion to the new bridge helpers
- vgem: Use shmem helpers
- virtio: Support mapping exported vram
- zte: Remove obsolete driver
- bridge: Probe improvements for it66121, enable DSI EOTP for anx7625,
errors propagation improvements for anx7625
- panels: 60fps mode for otm8009a, New driver for Samsung S6D27A1
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 16 Sep 2021 17:30:50 AEST
# gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Can't check signature: No public key
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916073132.ptbbmjetm7v3ufq3@gilmour
We thought the DG2 table of shadowed registers would be the same as the
gen12/xehp table, but it turns out that there are a few minor
differences that require us to define a new DG2-specific table:
* One register is removed (0xC4D4)
* One register is added (0xC4E0)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-7-matthew.d.roper@intel.com
Consolidate down to just a single 'fwtable' implementation. For reads
we don't need to worry about shadow tables.
While consolidating the functions, gen11/gen12 pick up a
NEEDS_FORCE_WAKE() check that they didn't have before, allowing them to
bypass a lot of forcewake/shadow checking for non-GT registers (e.g.,
display).
v2:
- Restore NEEDS_FORCE_WAKE() check. (Chris, Tvrtko)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-6-matthew.d.roper@intel.com
Now that the reference to the shadow table is stored within the uncore,
we don't need to generate separate fwtable, gen11_fwtable, and
gen12_fwtable variants of the register write functions; a single
'fwtable' implementation will work for all of those platforms now.
While consolidating the functions, gen11/gen12 pick up a
NEEDS_FORCE_WAKE() check that they didn't have before, allowing them to
bypass a lot of forcewake/shadow checking for non-GT registers (e.g.,
display). However since these later platforms also introduce media
engines at higher MMIO offsets, the definition of NEEDS_FORCE_WAKE() is
extended to also consider register offsets above GEN11_BSD_RING_BASE.
v2:
- Restore NEEDS_FORCE_WAKE(), but extend it for compatibility with the
gen11+ platforms by also passing offsets above GEN11_BSD_RING_BASE.
(Chris, Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-5-matthew.d.roper@intel.com
Now that we have both a standard forcewake table (albeit a single-entry
table) and the shadow table stored in the uncore, we can drop the
gen8-specific write handlers in favor of the general fwtable version.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-4-matthew.d.roper@intel.com
Store a reference to a platform's shadow table inside the uncore, the
same as we do with the forcewake table. This will allow us to use a
single set of functions that operate on the shadow table reference
rather than generating lots of nearly-identical functions via macros
that differ only in terms of the table that they reference.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-3-matthew.d.roper@intel.com
On gen6-gen8 (except vlv/chv) we don't use a forcewake lookup table; we
simply check whether the register offset is < 0x40000, and return
FORCEWAKE_RENDER if it is. To prepare for upcoming refactoring, let's
define a single-entry forcewake table from [0x0, 0x3ffff] and switch
these platforms over to use the fwtable reader functions.
v2:
- Drop __gen6_reg_read_fw_domains which is no longer used. (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-2-matthew.d.roper@intel.com
When we implement delayed destroy, we may have a second
call to the delete_mem_notify() handler, while free_object()
only should be called once.
Move it to bo->destroy(), to ensure it's only called once.
This fixes some weird memory corruption issues with delayed
destroy when async eviction is used.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-2-maarten.lankhorst@linux.intel.com
Fixes: 213d509277 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit 48b0961269)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Earlier while calculating derated bw we would use 90% of the calculated
bw. Starting ADL-P we use a non standard derating. Updating the formulae
to reflect the same.
Bspec: 64631
v2: Use the new derating value only for ADL-P(MattR)
Fixes: 4d32fe2f14 ("drm/i915/adl_p: Update memory bandwidth parameters")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914220744.16042-1-radhakrishna.sripada@intel.com
(cherry picked from commit f6d66fc8cf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This symbol is not used outside of dw-mipi-dsi-rockchip.c, so marks
it static.
Fix the following sparse warning:
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:646:13: warning: symbol
'hstt_table' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1628218664-14230-1-git-send-email-jiapeng.chong@linux.alibaba.com
Clean up the following includecheck warning:
./drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c: linux/phy/phy.h is
included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 71f68fe7f1 ("drm/rockchip: dsi: add ability to work as a phy instead of full dsi")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1629454729-108701-1-git-send-email-jiapeng.chong@linux.alibaba.com
Commit a25b988ff8 ("drm/bridge: Extend bridge API to disable connector creation")
added DRM_BRIDGE_ATTACH_NO_CONNECTOR bridge flag and all bridges handle
this flag in some way since then.
Newly added bridge drivers must no longer contain the connector creation and
will fail probing if this flag isn't set.
In order to be able to connect to those newly added bridges as well,
make use of drm_bridge_connector API and have the connector initialized
by the display controller.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913125108.195704-1-knaerzche@gmail.com
As discussed at [1] rockchip_drm_endpoint_is_subdriver will currently always
return -ENODEV for non-platform-devices (e.g. external i2c bridges), what
makes them never being considered in rockchip_rgb_init.
As suggested at [1] this additionally adds a of_device_is_available for
the node found, which will work for both platform and non-platform devices.
Also we can return early for non-platform-devices if they are enabled,
as rockchip_sub_drivers contains exclusively platform-devices.
[1] https://lore.kernel.org/all/20210316182753.GA25685@earth.li/
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914150756.85190-1-knaerzche@gmail.com
On Xe_HP and beyond the SFC unit may be fused off, even if the
corresponding media engines are present. Check the SFC-specific fusing
before trying to dump the SFC_DONE instances.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917161203.812251-3-matthew.d.roper@intel.com
Xe_HP adds some new bits to the FUSE1 register to let us know whether a
given SFC unit is present. We should take this into account while
initializing SFC availability to our VCS and VECS engines.
While we're at it, update the FUSE1 register definition to use
REG_GENMASK / REG_FIELD_GET notation.
Note that, the bspec confusingly names the fuse bits "disable" despite
the register reflecting the *enable* status of the SFC units. The
original architecture documents which the bspec is based on do properly
name this field "SFC_ENABLE."
Bspec: 52543
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917161203.812251-2-matthew.d.roper@intel.com
Don't blow up on a GEM_WARN_ON in __i915_gem_object_is_lmem if the
object is pinned (not evictable).
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-6-matthew.brost@intel.com
The firmware binary has to be loaded from lmem and the recommendation is
to put all other objects in there as well. Note that we don't fall back
to system memory if the allocation in lmem fails because all objects are
allocated during driver load and if we have issues with lmem at that point
something is seriously wrong with the system, so no point in trying to
handle it.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-3-matthew.brost@intel.com
Defining vma on stack can cause stack overflow, if
vma gets populated with new fields.
v2:
(Daniel Vetter)
- Add kerneldoc for new field
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-2-matthew.brost@intel.com
nvkm test builds fail with the following error.
drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'
The code builds on most architectures, but fails on parisc where ENOSYS
is defined as 251.
Replace the error code with -ENODEV (-19). The actual error code does
not really matter and is not passed to userspace - it just has to be
negative.
Fixes: 7238eca4cf ("drm/nouveau: expose pstate selection per-power source in sysfs")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As discussed in the patch ("dt-bindings: drm/panel-simple: Introduce
generic eDP panels") we can actually support probing eDP panels at
runtime instead of hardcoding what panel is connected. Add support to
the panel-edp driver for this.
We'll implement a solution like this:
* We'll read in two delays from the device tree that are used for
powering up the panel the initial time (to read the EDID).
* In the EDID we can find a 32-bit ID that identifies what panel we've
found. From this ID we can look up the full set of delays.
After this change we'll still need to add per-panel delays into the
panel-simple driver but we will no longer need to specify exactly
which panel is connected to which board in the device tree. Nicely,
any panels that are only supported this way also don't need to
hardcode mode data since it's guaranteed that we can get that through
the EDID.
This patch will seed the ID-to-delay table with a few panels that I
have access to, many of which are on sc7180-trogdor devices.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.15.Id9c96cba4eba3e5ee519bfb09cd64b39f2490293@changeid
While cleaning up the descriptions of the delay for eDP panels I
realized that we'd have a bug if any panels need the
"prepare_to_enable" but HPD handling isn't happening in the panel
driver. Let's put in a stopgap to at least make us not violate
timings. This is not perfectly optimal but trying to do better is
hard. At the moment only 2 panels specify this delay and only 30 ms is
at stake. These panels are also currently hooked up with "hpd-gpios"
so effectively this "fix" is just a theoretical fix and won't actually
do anything for any devices currently supported in mainline.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.13.Ia8288d36df4b12770af59ae3ff73ef7e08fb4e2e@changeid
Now that the delays are named / described with eDP-centric names, it
becomes clear that we should really specify the "hpd_reliable" and
"hpd_absent" separately without taking the other into account. Let's
fix it.
This should be a no-op change and just adjust how we specify
things. The actual delays should be the same before and after for the
one panel that currently species both "hpd_reliable" and "hpd_absent".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.12.I2522235fca3aa6790ede0bf22a93d79a1f694e6b@changeid
Now that the eDP panel driver only handles eDP panels we can make
better sense of the delays here. Let's describe them in terms of the
standard eDP timing diagram from the eDP spec.
As part of this, it becomes pretty clear that some eDP panels have too
long of a "hpd_reliable_delay". This used to be the "prepare"
delay. It's the fixed delay that we do in the panel driver after
powering on our panel before we look at the HPD signal. To understand
this better, first realize that there could be 3 paths we follow
depending on how HPD is hooked up. Let's walk through them:
1. HPD is handled by the eDP controller driver. Until "recently"
(commit 48834e6084 ("drm/panel-simple: Support hpd-gpios for
delaying prepare()") in May 2020) this was the only supported
way. This is supposed to be when the controller driver gets HPD
straight to a dedicated pin. In this case the controller driver
should be waiting for HPD in its pre_enable() routine which should
be called right after the panel's prepare() function is
called. That means that the old "prepare" delay was only needed as
a delay after powering the panel but before looking at HPD.
2. HPD is handled via hpd-gpios in the panel. This is much like #1 but
much easier to follow since all the handling is in the panel
driver.
3. The no-hpd case. This is also easy to follow.
In any case, even though it seems like some old panel data was using
this incorrectly, let's not touch the old data structures but we'll
add a note indicating that something seems off.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.11.I2d798dd015332661c5895ef744bc8ec5cd2e06ca@changeid
In the case where we can read an EDID for a panel the only part of the
panel description that can't be found directly from the EDID is the
description of the delays. Let's break the delay structure out so that
we can specify just the delays for panels that are detected by EDID.
This is simple code motion. No functional change is intended.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.10.I24f3646dd09954958645cc05c538909f169bf362@changeid
All of the "HPD" handling added to panel-simple recently was for eDP
panels. Remove it from panel-simple now that panel-edp handles eDP
panels. The "prepare_to_enable" delay only makes sense in the context
of HPD, so remove it too. No non-eDP panels used it anyway.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.9.I77d7a48df0a6585ef2cc2ff140fbe8f236a9a9f7@changeid
Not all panels in panel-simple were marked what type of panel they
were. I searched through ARM/ARM64 Chromebooks or Chromebook-related
reference boards that I was aware of and found some panels that needed
to be moved. I also skimmed for panels that had no mode and were "big"
since it's quite rare to see a small eDP panel. Here's what I found:
* auo,b101ean01 - rk3288-veyron-minnie
* auo,b133htn01 - exynos5800-peach-pi
* auo,b133xtn01 - tegra124-nyan-big
* boe,nv101wxmn51 - rk3399-gru-bob
* innolux,p120zdg-bf1 - sdm845-cheza
* lg,lp079qx1-sp0v - rk3399-evb and similar
* lg,lp097qx1-spa1 - According to commit 0355dde26e ("drm/panel:
simple: Add support for LG LP097QX1-SPA1 panel") this is an eDP
panel.
* lg,lp129qe - tegra124-venice2
* samsung,lsn122dl01-c01 - According to commit 0330eaf390
("drm/panel: simple: Add support for Samsung LSN122DL01-C01 panel")
this is an eDP panel.
* samsung,ltn140at29-301 - tegra124-nyan-blaze
* sharp,ld-d5116z01b - According to commit cd5e1cbe1f ("drm/panel:
simple: Add support for Sharp LD-D5116Z01B panel") this is an eDP
panel.
* sharp,lq123p1jx31 - rk3399-gru-kevin
* starry,kr122ea0sra - rk3399-gru-gru (reference board, not upstream)
I won't promise that I didn't miss a single panel, but that's fairly
complete I think.
I'm not sure the full impact of the fact that they didn't have the
connector type specified, but at least as of commit 9f069c6fbc
("drm/panel: panel-simple: add default connector_type") we may have
been accidentally thinking of them as DPI panels. We also would
certainly have had a warning. In any case since we don't want to
support anything eDP in the old simple-panel driver, we should move
these.
Cc: Yakir Yang <ykk@rock-chips.com>
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.8.I84e36f9f86d5d693fce0641a55ddb264a518a947@changeid
The panel-simple driver handles way too much. Let's start trying to
get a handle on it by splitting out the eDP panels. This patch does
this:
1. Start by copying simple-panel verbatim over to a new driver,
simple-panel-edp.
2. Rename "panel_simple" to "panel_edp" in the new driver.
3. Keep only panels marked with `DRM_MODE_CONNECTOR_eDP` in the new
driver. Remove those panels from the old driver.
4. Remove all recent "DP AUX bus" stuff from the old driver. The DP
AUX bus is only possible on DP panels.
5. Remove all DSI / MIPI related functions from the new driver.
6. Remove bus_format / bus_flags from eDP driver. These things don't
seem to make any sense for eDP panels so let's stop filling in made
up stuff.
In the end we end up with a bunch of duplicated code for now. Future
patches will try to address _some_ of this duplicated code though some
of it will be unavoidable.
NOTE: This may not actually move all eDP panels over to the new driver
since not all panels were properly marked with
`DRM_MODE_CONNECTOR_eDP`. A future patch will attempt to move wayward
panels I could identify but even so there may be some missed.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.7.I0a2f75bb822d17ce06f5b147734764eeb0c3e3df@changeid
In the patch ("drm/edid: Allow the querying/working with the panel ID
from the EDID") we introduced a different way of working with the
panel ID stored in the EDID. Let's use this new way for the quirks
code.
Advantages of the new style:
* Smaller data structure size. Saves 4 bytes per panel.
* Iterate through quirks structure with just "==" instead of strncmp()
* In-kernel storage is more similar to what's stored in the EDID
itself making it easier to grok that they are referring to the same
value.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.4.I6103ce2b16e5e5a842b14c7022a034712b434609@changeid
EDIDs have 32-bits worth of data which is intended to be used to
uniquely identify the make/model of a panel. This has historically
been used only internally in the EDID processing code to identify
quirks with panels.
We'd like to use this panel ID in panel drivers to identify which
panel is hooked up and from that information figure out power sequence
timings. Let's expose this information from the EDID code and also
allow it to be accessed early, before a connector has been created.
To make matching in the panel drivers code easier, we'll return the
panel ID as a 32-bit value. We'll provide some functions for
converting this value back and forth to something more human readable.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.3.I4a672175ba1894294d91d3dbd51da11a8239cf4a@changeid
A future change wants to be able to read just block 0 of the EDID, so
break it out of drm_do_get_edid() into a sub-function.
This is intended to be a no-op change--just code movement.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.2.I62e76a034ac78c994d40a23cd4ec5aeee56fa77c@changeid
128b/132b has a separate transcoder DDI mode, which also requires the
MST transport select to be set. Note that we'll use DP MST also for
single-stream 128b/132b.
Having the FDI and 128b/132b modes share the register mode value
complicates things a bit.
v2:
- Use HAS_DP20 abstraction for 128b/132b mode (Ville)
- Use intel_dp_is_uhbr() helper
Bspec: 50493
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/279bfbd979e0256fae13a5231e07e2f4fb665c07.1631191763.git.jani.nikula@intel.com
Extend the use of extended receiver cap at 0x2200 to cover
MAIN_LINK_CHANNEL_CODING_CAP in 0x2206, in case an implementation hides
the DP 2.0 128b/132b channel encoding cap.
v2: Extend to DP_RECEIVER_CAP_SIZE (Ville)
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/649051cb896821147feee91aab1f2abc523c1353.1631191763.git.jani.nikula@intel.com
Adding missing "intel_" prefix in set_mocs_index().
Fixes: b62aa57e3c ("drm/i915/gt: Add support of mocs propagation")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916062736.1733587-1-ayaz.siddiqui@intel.com
Support for multiple GT's within a single i915 device will be arriving
soon. Since each GT may have its own fusing and require different
workarounds, we need to make the GT workaround functions and multicast
steering setup per-gt.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917170845.836358-1-matthew.d.roper@intel.com
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920090522.23784-6-wsa+renesas@sang-engineering.com
This symbol is not used outside of panfrost_drv.c, so marks it static.
Fix the following sparse warning:
drivers/gpu/drm/panfrost/panfrost_drv.c:641:12: warning: symbol
'mediatek_mt8183_supplies' was not declared. Should it be static?
drivers/gpu/drm/panfrost/panfrost_drv.c:642:12: warning: symbol
'mediatek_mt8183_pm_domains' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1631956414-85412-1-git-send-email-jiapeng.chong@linux.alibaba.com
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901112941.31320-1-caihuoqing@baidu.com
Currently it66121_probe returns -EPROBE_DEFER if the there is no remote
endpoint found in the device tree which doesn't seem helpful, since this
is not going to change later and it is never checked if the next bridge
has been initialized yet. It will fail in that case later while doing
drm_bridge_attach for the next bridge in it66121_bridge_attach.
Since the bindings documentation for it66121 bridge driver states
there has to be a remote endpoint defined, its safe to return -EINVAL
in that case.
This additonally adds a check, if the remote endpoint is enabled and
returns -EPROBE_DEFER, if the remote bridge hasn't been initialized
(yet).
Fixes: 988156dc2f ("drm: bridge: add it66121 driver")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918140420.231346-1-knaerzche@gmail.com
In a cl submission, when bin job initialization fails, sched job resources
were already allocated for the render job. At this point,
drm_sched_job_init(render) was done in v3d_job_init but the render job is
aborted before drm_sched_job_arm (in v3d_job_push) happens; therefore, not
only v3d_job_put but also drm_sched_job_cleanup should be called (by
v3d_job_cleanup). A similar issue is addressed for csd and tfu submissions.
The issue was noticed from a review by Iago Toral in a patch that touches
the same part of the code.
Fixes: 916044fac8 ("drm/v3d: Move drm_sched_job_init to v3d_job_init")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916212726.2u2psq2egwy2mdva@mail.igalia.com
This reverts commits
9984d6664c ("drm/vc4: hdmi: Make sure the controller is powered in detect")
411efa18e4 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84bfd: "Merge tag 'drm-next-2021-07-01' of git://.../drm").
Revert these two commits until it's been resolved.
Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/
Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although commit 9dd4b06544 ("drm/i915/gt: Move pm debug files into a
gt aware debugfs") says it was moving debug files to gt/, the
i915_frequency_info file was left behind and its implementation copied
into drivers/gpu/drm/i915/gt/debugfs_gt_pm.c. Over time we had several
patches having to change both places to keep them in sync (and some
patches failing to do so). The initial idea was to remove
i915_frequency_info, but there are user space tools using it. From a
quick code search there are other scripts and test tools besides igt, so
it's not simply updating igt to get rid of the older file.
Here we export a function using drm_printer as parameter and make
both show() implementations to call this same function. Aside from a few
variable name differences, for i915_frequency_info this brings a few
lines that were not previously printed: RP UP EI, RP UP THRESHOLD, RP
DOWN THRESHOLD and RP DOWN EI. These came in as part of
commit 9c878557b1 ("drm/i915/gt: Use the RPM config register to
determine clk frequencies"), which didn't change both places.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918025754.1254705-4-lucas.demarchi@intel.com
We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_gt_pm.[ch] to intel_gt_pm_debugfs.[ch] and then make
functions, defines and structs follow suit.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918025754.1254705-3-lucas.demarchi@intel.com
We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_engines.[ch] to intel_gt_engines_debugfs.[ch] and then make
functions, defines and structs follow suit.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918025754.1254705-2-lucas.demarchi@intel.com
We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_gt.[ch] to intel_gt_debugfs.[ch] and then make functions,
defines and structs follow suit.
While at it and since we are renaming the header, sort the includes
alphabetically.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918025754.1254705-1-lucas.demarchi@intel.com
Wa_16014451276 fixes the starting coordinate for PSR2 selective
updates. CHICKEN_TRANS definition of the workaround bit has a wrong
name based on workaround definition and HSD.
Wa_14014971508 allows the screen to continue to be updated when
coming back from DC5/DC6 and SF_SINGLE_FULL_FRAME bit is not kept
set in PSR2_MAN_TRK_CTL.
Wa_16012604467 fixes underruns when exiting PSR2 when it is in one
of its internal states.
Wa_14014971508 is still in pending status in BSpec but by
the time this is reviewed and ready to be merged it will be finalized.
v2:
- renamed register to ADLP_1_BASED_X_GRANULARITY
- added comment about all ADL-P supported panels being 1 based X
granularity
BSpec: 54369
BSpec: 50054
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-5-jose.souza@intel.com
drm_atomic_helper_damage_iter_init() + drm_atomic_for_each_plane_damage()
returns the full plane area in case no damaged area was set by
userspace or it was discarted by driver.
This is important to fix the rendering of userspace applications that
does frontbuffer rendering and notify driver about dirty areas but do
not set any dirty clips.
With this we don't need to worry about to check and mark the whole
area as damaged in page flips.
Another important change here is the move of
drm_atomic_add_affected_planes() call, it needs to called late
otherwise the area of all the planes would be added to pipe_clip and
not saving power.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-4-jose.souza@intel.com
Not sure why but when moving the cursor fast it causes some artifacts
of the cursor to be left in the cursor path, adding some pixels above
the cursor to the damaged area fixes the issue, so leaving this as a
workaround until proper fix is found.
This is reproducile on TGL and ADL-P.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-3-jose.souza@intel.com
BSpec states that the minimum number of frames before selective update
is 2, so making sure this minimum limit is fulfilled.
BSpec: 50422
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-2-jose.souza@intel.com
i915 will soon gain an eviction path that trylock a whole lot of locks
for eviction, getting dmesg failures like below:
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by i915_selftest/5776:
#0: ffff888101a79240 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x88/0x160
#1: ffffc900009778c0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.63+0x39/0x1b0 [i915]
#2: ffff88800cf74de8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.63+0x5f/0x1b0 [i915]
#3: ffff88810c7f9e38 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x1c4/0x9d0 [i915]
#4: ffff88810bad5768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
#5: ffff88810bad60e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
...
#46: ffff88811964d768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
#47: ffff88811964e0e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
INFO: lockdep is turned off.
Fixing eviction to nest into ww_class_acquire is a high priority, but
it requires a rework of the entire driver, which can only be done one
step at a time.
As an intermediate solution, add an acquire context to
ww_mutex_trylock, which allows us to do proper nesting annotations on
the trylocks, making the above lockdep splat disappear.
This is also useful in regulator_lock_nested, which may avoid dropping
regulator_nesting_mutex in the uncontended path, so use it there.
TTM may be another user for this, where we could lock a buffer in a
fastpath with list locks held, without dropping all locks we hold.
[peterz: rework actual ww_mutex_trylock() implementations]
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YUBGPdDDjKlxAuXJ@hirez.programming.kicks-ass.net
The release notes mentions that this version-
1. Fix for unblock indication to punit.
2. Robustness fix for DC6/6v abort scenarios.
Cc: Imre Deak <Imre Deak <imre.deak@intel.com>>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914215732.67135-2-anusha.srivatsa@intel.com
It turns out that when locking a region, the region must be a naturally
aligned power of 2. The upshot of this is that if the desired region
crosses a 'large boundary' the region size must be increased
significantly to ensure that the locked region completely covers the
desired region. Previous calculations (including in kbase for the
proprietary driver) failed to take this into account.
Since it's known that the lock region must be naturally aligned we can
compute the required size by looking at the highest bit position which
changes between the start/end of the lock region (subtracting 1 from the
end because the end address is exclusive). The start address is then
aligned based on the size (this is technically unnecessary as the
hardware will ignore these bits, but the spec advises to do this "to
avoid confusion").
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903094957.74560-1-steven.price@arm.com
When kmem_cache_zalloc in virtio_gpu_get_vbuf fails, it will return
an error code. But none of its callers checks this error code, and
a core dump will take place.
Considering many of its callers can't handle such error, I add
a __GFP_NOFAIL flag when calling kmem_cache_zalloc to make sure
it won't fail, and delete those unused error handlings.
Fixes: dc5698e80c ("Add virtio gpu driver.")
Signed-off-by: Yuntao Liu <liuyuntao10@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210828104321.3410312-1-liuyuntao10@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
amdgpu:
- UBSAN fix
- Powerplay table update fix
- Fix use after free in BO moves
- Debugfs init fixes
- vblank workqueue fixes for headless devices
- FPU fixes
- sysfs_emit fixes
- SMU updates for cyan skillfish
- Backlight fixes when DMCU is not initialized
- DP MST fixes
- HDCP compliance fix
- Link training fix
- Runtime pm fix
- Panel orientation fixes
- Display GPUVM fix for yellow carp
- Add missing license
amdkfd:
- Drop PCI atomics requirement if proper firmware is available
- Suspend/resume fixes for IOMMUv2 cases
radeon:
- AGP fix
i915:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
etnaviv:
- MMU context vs runtime PM fix
-----BEGIN PGP SIGNATURE-----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=FZWA
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Slightly busier than usual rc2, but mostly scattered amdgpu fixes,
some i915 and etnaviv resolves an MMU/runtime PM blowup.
amdgpu:
- UBSAN fix
- Powerplay table update fix
- Fix use after free in BO moves
- Debugfs init fixes
- vblank workqueue fixes for headless devices
- FPU fixes
- sysfs_emit fixes
- SMU updates for cyan skillfish
- Backlight fixes when DMCU is not initialized
- DP MST fixes
- HDCP compliance fix
- Link training fix
- Runtime pm fix
- Panel orientation fixes
- Display GPUVM fix for yellow carp
- Add missing license
amdkfd:
- Drop PCI atomics requirement if proper firmware is available
- Suspend/resume fixes for IOMMUv2 cases
radeon:
- AGP fix
i915:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
etnaviv:
- MMU context vs runtime PM fix"
* tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm: (44 commits)
drm/amdgpu/display: add a proper license to dc_link_dp.c
drm/amd/display: Fix white screen page fault for gpuvm
amd/display: enable panel orientation quirks
drm/amdgpu: Demote TMZ unsupported log message from warning to info
drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count
drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver
drm/radeon: pass drm dev radeon_agp_head_init directly
drm/amdgpu: move iommu_resume before ip init/resume
drm/amdgpu: add amdgpu_amdkfd_resume_iommu
drm/amdkfd: separate kfd_iommu_resume from kfd_resume
drm/amd/display: Link training retry fix for abort case
drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo
drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3
drm/amd/display: Get backlight from PWM if DMCU is not initialized
drm/amdkfd: make needs_pcie_atomics FW-version dependent
drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)
drm/amdgpu: add some pptable funcs for cyan skilfish(v3)
drm/amdgpu: update SMU driver interface for cyan skilfish(v3)
drm/amdgpu: update SMU PPSMC for cyan skilfish
drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2)
...
drm/i915 fixes for v5.15-rc2:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8735q4wsu7.fsf@intel.com
With the new static annotation, the compiler warns when the functions
are actually unused:
drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
1123 | static int cdn_dp_resume(struct device *dev)
| ^~~~~~~~~~~~~
Mark them __maybe_unused to suppress that warning as well.
[ Not so 'new' static annotations any more, and I removed the part of
the patch that added __maybe_unused to cdn_dp_suspend(), because it's
used by the shutdown/remove code.
So only the resume function ends up possibly unused if CONFIG_PM isn't
set - Linus ]
Fixes: 7c49abb4c2 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All jobs are failing on Tegra20 because it doesn't use IOMMU and mapping
function uses size of mapping that is zero instead of BO size, fix it.
Fixes: d7c591bc1a ("drm/tegra: Implement new UAPI")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[Why]
The "base_addr_is_mc_addr" field was added for dcn3.1 support but
pa_config was never updated to set it to false.
Uninitialized memory causes it to be set to true which results in
address mistranslation and white screen.
[How]
Use memset to ensure all fields are initialized to 0 by default.
Fixes: 64b1d0e8d5 ("drm/amd/display: Add DCN3.1 HWSEQ")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.
Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the user cannot do anything about the unsupported Trusted Memory Zone
(TMZ) feature, do not warn about it, but make it informational, so
demote the log level from warning to info.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was unusual; normally, inline functions are declared static as
well, and defined in a header file if used by multiple compilation
units. The latter would be more involved in this case, so just drop
the inline declaration for now.
Fixes compile failure building for ppc64le on RHEL 8:
In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32,
from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call
to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available
90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here
1985 | max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count();
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: c84d46707e "drm/amdgpu: validate bad page threshold in ras(v3)"
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current RUNPM mechanism relies on PMFW to master the timing for BACO
in/exit. And that needs cooperation from sound driver for dstate
change notification for function 1(audio). Otherwise(on sound driver
missing), BACO cannot be kicked in correctly and hang will be observed
on RUNPM exit.
By switching back to legacy message way on sound driver missing,
we are able to fix the runpm hang observed for the scenario below:
amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-and-tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Pass drm dev directly as rdev->ddev gets initialized later on
at radeon_device_init().
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Separate iommu_resume from kfd_resume, and move it before
other amdgpu ip init/resume.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.
v2: squash in fix for !CONFIG_HSA_AMD
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
If link training is aborted, it shall be retried if sink is present.
[How]
Check hpd status to find out whether sink is present or not. If sink is
present, then link training shall be tried again with same settings.
Otherwise, link training shall be aborted.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Intermittently, there presents two occurrences of 0 stream
commits in a single HPD event. Current HDCP sequence does
not consider such scenerio, and will thus disable HDCP.
[How]
Add condition check to include stream remove and re-enable
case for HDCP enable.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
call stack of amdgpu dsc mst pbn, slot num calculation is as below:
-compute_bpp_x16_from_target_bandwidth
-decide_dsc_target_bpp_x16
-setup_dsc_config
-dc_dsc_compute_bandwidth_range
-compute_mst_dsc_configs_for_link
-compute_mst_dsc_configs_for_state
from pbn -> dsc target bpp_x16
bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth.
Beside pixel clock and bpp, num_slices_h and bpp_increment_div
will also affect bpp_x16.
from dsc target bpp_x16 -> pbn
within dm_update_mst_vcpi_slots_for_dsc,
pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true);
drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
{
return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006),
8 * 54 * 1000 * 1000);
}
bpp / 16 trunc digits after decimal point. This will cause calculation
delta. drm_dp_calc_pbn_mode does not have other informations,
like num_slices_h, bpp_increment_div. therefore, it does not do revese
calcuation properly from bpp_x16 to pbn.
pbn from drm_dp_calc_pbn_mode is less than pbn from
compute_mst_dsc_configs_for_state. This cause not enough mst slot
allocated to display. display could not visually light up.
[How]
pass pbn from compute_mst_dsc_configs_for_state to
dm_update_mst_vcpi_slots_for_dsc
Cc: stable@vger.kernel.org
Reviewed-by: Scott Foster <Scott.Foster@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e.
directly via the PWM registers, if DMCU is not initialized. We
always read it back through ABM registers which leads to a
mismatch and forces atomic_commit to program the backlight
each time.
Instead make sure we use the same logic for backlight readback,
i.e. read it from panel_cntl if DMCU is not initialized.
We also need to remove some extraneous and incorrect calculations
at the end of dce_get_16_bit_backlight_from_pwm.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.
Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs
to maintain consistency with other asics. As cyan skillfish doesn't
support DPM, there is only a single frequency and voltage to adjust.
v2: maintain consistency and add command guide.
v3: adjust user settings storage and coding style.
Command guide:
echo vc point sclk vddc > pp_od_clk_voltage
"vc" - sclk voltage curve
"point" - must be 0
"sclk" - target value of sclk(MHz), should be in safe range
"vddc" - target value of vddc(mV), a 6.25(mV) stepping is
recommended and should be in safe range (the real
vddc is an approximation of target value)
echo c > pp_od_clk_voltage
"c" - commit the changes of sclk and vddc, only after
the commit command, the target values set by "vc"
command will take effect
echo r > pp_od_clk_voltage
"r" - reset sclk and vddc to default value, a subsequent
commit command is needed to take effect
Example:
1) Check default sclk and vddc
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 862mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
2) Set sclk to 1500MHz and vddc to 700mV
$ echo vc 0 1500 700 > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1500Mhz *
OD_VDDC:
0: 693mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
3) Reset sclk and vddc to default
$ echo r > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 874mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
NOTE:
We don't specify an explicit safe range, you can set any values
between min and max at your own risk. Enjoy!
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add print_clk_levels and read_sensor pptable funcs for
cyan skilfish.
v2: keep consitency and add get_gpu_metrics callback.
v3: use sysfs_emit_at() in sysfs show function.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add SmuMetrics_t definition for cyan skilfish.
v2: update SmuMetrics_t definition.
v3: cleanup and rearrange the order of fields.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some PPSMC MSGs for cyan skilfish.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assert only when FPU is not enabled.
Fixes: 0ea7ee8217 ("drm/amd/display: Add DC_FP helper to check FPU state")
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If we're running a headless config with 0 links then the vblank
workqueue will be NULL - causing a NULL pointer exception during
any commit.
[How]
Guard access to the workqueue if it's NULL and don't queue or flush
work if it is.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700
Fixes: 58aa1c50e5 ("drm/amd/display: Use vblank control events for PSR enable/disable")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916105633.12162-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916105625.12109-1-caihuoqing@baidu.com
When we implement delayed destroy, we may have a second
call to the delete_mem_notify() handler, while free_object()
only should be called once.
Move it to bo->destroy(), to ensure it's only called once.
This fixes some weird memory corruption issues with delayed
destroy when async eviction is used.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-2-maarten.lankhorst@linux.intel.com
Fixes: 213d509277 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
When we forcefully evict a mapping from the the address space and thus the
MMU context, the MMU context is leaked, as the mapping no longer points to
it, so it doesn't get freed when the GEM object is destroyed. Add the
mssing context put to fix the leak.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Move the refcount manipulation of the MMU context to the point where the
hardware state is programmed. At that point it is also known if a previous
MMU state is still there, or the state needs to be reprogrammed with a
potentially different context.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
After a reset the GPU is no longer using the MMU context and may be
restarted with a different context. While the mmu_state proeprly was
cleared, the context wasn't unreferenced, leading to a memory leak.
Cc: stable@vger.kernel.org # 5.4
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
When the GPU is reset both the current exec state, as well as all MMU
state is lost. Move the driver side state tracking into the reset function
to keep hardware and software state from diverging.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The MMU state may be kept across a runtime suspend/resume cycle, as we
avoid a full hardware reset to keep the latency of the runtime PM small.
Don't pretend that the MMU state is lost in driver state. The MMU
context is pushed out when new HW jobs with a different context are
coming in. The only exception to this is when the GPU is unbound, in
which case we need to make sure to also free the last active context.
Cc: stable@vger.kernel.org # 5.4
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
While the DMA frontend can only be active when the MMU context is set, the
reverse isn't necessarily true, as the frontend can be stopped while the
MMU state is kept. Stop treating mmu_context being set as a indication that
the frontend is running and instead add a explicit property.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The prev context is the MMU context at the time of the job
queueing in hardware. As a job might be queued multiple times
due to recovery after a GPU hang, we need to make sure to put
the stale prev MMU context from a prior queuing, to avoid the
reference and thus the MMU context leaking.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Being able to have the refcount manipulation in an assignment makes
it much easier to parse the code.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Earlier while calculating derated bw we would use 90% of the calculated
bw. Starting ADL-P we use a non standard derating. Updating the formulae
to reflect the same.
Bspec: 64631
v2: Use the new derating value only for ADL-P(MattR)
Fixes: 4d32fe2f14 ("drm/i915/adl_p: Update memory bandwidth parameters")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914220744.16042-1-radhakrishna.sripada@intel.com
The hardware sets the TMUWCF bit back to 0 when the TMU write
combiner flush completes so we should be checking for that instead
of the L2TFLS bit.
v2 (Melissa Wen):
- Add Signed-off-by and Fixes tags.
- Change the error message for the timeout to be more clear.
Fixes spurious Vulkan CTS failures in:
dEQP-VK.binding_model.descriptorset_random.*
Fixes: d223f98f02 ("drm/v3d: Add support for compute shader dispatch.")
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915100507.3945-1-itoral@igalia.com
PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder.
Bigjoiner is making life even more confusing by introducing
a N:1 relationship between pipes and transcoders. In that case
we only enable/configure the transcoder corresponding to the
master pipe. Let's do some renames to make it clear we're dealing
with the transcoder rather than pipe when it comes to
PIPECONF/TRANSCONF.
I decided to leave the _cpu_ part out from the function/macro
names since the PCH transcoder related stuff already has a
_pch_ in their name. So shouldn't be possible to confuse them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
GPU wedged flag now set on driver unregister to prevent from further
using the GPU can be then cleared unintentionally when calling
__intel_gt_unset_wedged() still before the flag is finally marked
unrecoverable. We need to have it marked unrecoverable earlier.
Implement that by replacing a call to intel_gt_set_wedged() in
intel_gt_driver_unregister() with intel_gt_set_wedged_on_fini().
With the above in place, intel_gt_set_wedged_on_fini() is now called
twice on driver remove, second time from __intel_gt_disable(). This
seems harmless, while dropping intel_gt_set_wedged_on_fini() from
__intel_gt_disable() proved to break some driver probe error unwind
paths as well as mock selftest exit path.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903142837.216978-1-janusz.krzysztofik@linux.intel.com
issue:
in cleanup_job the cancle_delayed_work will cancel a TO timer
even the its corresponding job is still running.
fix:
do not cancel the timer in cleanup_job, instead do the cancelling
only when the heading job is signaled, and if there is a "next" job
we start_timeout again.
v2:
further cleanup the logic, and do the TDR timer cancelling if the signaled job
is the last one in its scheduler.
v3:
change the issue description
remove the cancel_delayed_work in the begining of the cleanup_job
recover the implement of drm_sched_job_begin.
v4:
remove the kthread_should_park() checking in cleanup_job routine,
we should cleanup the signaled job asap
TODO:
1)introduce pause/resume scheduler in job_timeout to serial the handling
of scheduler and job_timeout.
2)drop the bad job's del and insert in scheduler due to above serialization
(no race issue anymore with the serialization)
Tested-by: jingwen <jingwen.chen@@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1630457207-13107-1-git-send-email-Monk.Liu@amd.com
Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
__fls() on sparc64 return "int", but here it is expected as "unsigned
long" (x86). It will cause the build errors because the warning becomes
fatal while it is using sparc configuration. As suggested by Linus, it
can use min_t instead of min to force the type as "unsigned int".
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907100302.3684453-1-ray.huang@amd.com
Current (and older) Simics models for the Bochs VGA used the wrong PCI
vendor ID (0x4321 instead of 0x1234). Although this can hopefully be
fixed in the future, it is a problem for users of the current version,
not the least because to update the device ID the BIOS has to be
rebuilt in order to see BIOS output.
Add support for the 4321:1111 device number in addition to the
1234:1111 one.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210910010655.2356245-1-hpa@zytor.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Like DG1, XeHP SDV doesn't have LLC/eDRAM control values due to being a
dgfx card. XeHP SDV adds 2 more bits: L3_GLBGO to "push the Go point to
memory for L3 destined transaction" and L3_LKP to "enable Lookup for
uncacheable accesses".
Bspec: 45101
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210904003544.2422282-2-matthew.d.roper@intel.com
On sparc64, __fls() returns an "int", but the drm TTM code expected it
to be "unsigned long" as on x86. As a result, on sparc (and arc, and
m68k) you get build errors because 'min()' checks that the types match.
As suggested by Linus, it can use min_t instead of min to force the type
to be "unsigned int".
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
debugfs APIs returns encoded error so use
IS_ERR for checking return value.
v2: return PTR_ERR(ent)
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-By: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On
failure this logs a warning to the kernel journal. However warnings
shouldn't be used for atomic test-only commit failures: user-space
might be perfoming a lot of atomic test-only commits to find the
best hardware configuration.
Downgrade the log to a regular DRM atomic message. While at it, use
the new device-aware logging infrastructure.
This fixes error messages in the kernel when running gamescope [1].
[1]: https://github.com/Plagman/gamescope/issues/245
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The memory backing old_mem is already freed at that point, move the
check a bit more up.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1699
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
fix the issue of uploading powerplay table due to the dependancy of rlc.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Seems like newer cards can have even more instances now.
Found by UBSAN: array-index-out-of-bounds in
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29
index 8 is out of range for type 'uint32_t *[8]'
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697
Cc: stable@vger.kernel.org
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Direct IB submission should be exclusive. So use write lock.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
alloc extra msg from direct IB pool.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
alloc extra msg from direct IB pool.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move BO allocation in sw_init.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove all TA binary structures and add the specific binary
structure in struct ta_context.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate iommu_resume from kfd_resume, and move it before
other amdgpu ip init/resume.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_amdkfd_resume_iommu for amdgpu.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.
v2: squash in fix for !CONFIG_HSA_AMD
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The AtomicOp Requester Enable bit is reserved in VFs and the PF value applies to all
associated VFs. so guest driver can not directly enable the atomicOps for VF, it
depends on PF to enable it. In current design, amdgpu driver will get the enabled
atomicOps bits through private pf2vf data
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Sequences to handle powering down these sub-IP blocks are now ready for use
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Power down VPG and AFMT blocks when not in use
[HOW]
Create afmt31 and vpg31 structs and add necessary fields to reg list
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Degamma coefficients are calculated in our degamma formula using
the regamma coefficients. We do not need to add separate degamma
coefficients.
[How]
Remove the change to add separate degamma coefficients.
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If link training is aborted, it shall be retried if sink is present.
[How]
Check hpd status to find out whether sink is present or not. If sink is
present, then link training shall be tried again with same settings.
Otherwise, link training shall be aborted.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Intermittently, there presents two occurrences of 0 stream
commits in a single HPD event. Current HDCP sequence does
not consider such scenerio, and will thus disable HDCP.
[How]
Add condition check to include stream remove and re-enable
case for HDCP enable.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Correct degamma coefficients
* Optimize bandwidth on following fast update
* Fix multiple memory leaks reported by coverity
* Get backlight from PWM if DMCU is not initialized
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some incorrect coefficients were being used
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* PSR SMU optimizations
* MST dock fixes
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When system is in Z10 HPD interrupts cannot fire, we may miss display
configuration changes.
[How]
When Zstate is enabled, if DMUB indicate DCN has lost power, do a
complete detection periodically.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
call stack of amdgpu dsc mst pbn, slot num calculation is as below:
-compute_bpp_x16_from_target_bandwidth
-decide_dsc_target_bpp_x16
-setup_dsc_config
-dc_dsc_compute_bandwidth_range
-compute_mst_dsc_configs_for_link
-compute_mst_dsc_configs_for_state
from pbn -> dsc target bpp_x16
bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth.
Beside pixel clock and bpp, num_slices_h and bpp_increment_div
will also affect bpp_x16.
from dsc target bpp_x16 -> pbn
within dm_update_mst_vcpi_slots_for_dsc,
pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true);
drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
{
return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006),
8 * 54 * 1000 * 1000);
}
bpp / 16 trunc digits after decimal point. This will cause calculation
delta. drm_dp_calc_pbn_mode does not have other informations,
like num_slices_h, bpp_increment_div. therefore, it does not do revese
calcuation properly from bpp_x16 to pbn.
pbn from drm_dp_calc_pbn_mode is less than pbn from
compute_mst_dsc_configs_for_state. This cause not enough mst slot
allocated to display. display could not visually light up.
[How]
pass pbn from compute_mst_dsc_configs_for_state to
dm_update_mst_vcpi_slots_for_dsc
Cc: stable@vger.kernel.org
Reviewed-by: Scott Foster <Scott.Foster@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some scenarios like fullscreen game, major plane is scaled. Then
if a upper layer owns the cursor, cursor is invisiable in the
majority of the screen.
[How]
Instead assuming upper plane handles cursor, summing up upper
split planes on the same layer. If whole upper plane covers current
half/whole pipe plane, disable cursor.
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The current call to optimize_bandwidth never occurs because flip is
always pending from the FULL and FAST updates.
[How]
Optimize on the following flip when it's a FAST update and we know we
aren't going to be modifying the clocks again.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD disable and enable sequences are not mutually exclusive
on Linux. For HPDs that spans under 1s (i.e. HPD low = 1s),
part of the disable sequence (specifically, a request to SMU
to lower refclk) could come right before the call to PHY
enablement, causing DMUB to access an irresponsive PHY
and thus a hard hang on the system.
[How]
Disable 48mhz refclk off when there is any HPD status in
connected state.
Reviewed-by: Hersen Wu <hersenwu@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In YUV case, need to set the input TF to sRGB instead of BT709,
even though the input TF type is distributed. SRGB was not
being used because pixel format was not being set in the
surface update sequence.
Also, we were using the same coefficients for degamma and
regamma formula, causing the cutoff point of the linear
section of the curve to be incorrect.
[How]
Set pixel format in the surface update sequence. Add separate
coefficient arrays for regamma and degamma.
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f5b6a20c7e.
This patch broke new settings from taking effect. Hotplug is
required for new settings to take effect.
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e.
directly via the PWM registers, if DMCU is not initialized. We
always read it back through ABM registers which leads to a
mismatch and forces atomic_commit to program the backlight
each time.
Instead make sure we use the same logic for backlight readback,
i.e. read it from panel_cntl if DMCU is not initialized.
We also need to remove some extraneous and incorrect calculations
at the end of dce_get_16_bit_backlight_from_pwm.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit "drm/amd/display: w/a for hard hang on HPD on native DP".
[How & Why]
Revert change as it does not fix the hard hang
in all cases. An alternative w/a will be submitted
separately.
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* PSR optimizations
* add support for ABM when ODM is enabled
* Z10 with PSR fixes
* Increase trace buffer
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need a check for NULL pointer access for ddc pin and aux engine.
[How]
Adding a check for ddc pin and aux engine accesses.
Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is an attempt to fix false warning raised by Coverity
via multiple CID's.
Addresses-Coverity-ID: 1487412 ("Free of address-of expression")
Cc: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Assuming DIG link encoders are statically mapped to links can cause
system instability due to null pointer accesses.
[How]
- Add checks for non-null link encoder pointers before trying to access
them.
- When a hardware platform uses dynamic DIG assignment (i.e. resource
function 'link_encs_assign' defined) and a link supports flexible
mapping to DIGs, use the link_enc_cfg API to access the DIG assigned to
a link or stream.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] When a connector is unplugged, dpms is forced off so that some
connector allocations are cleared off. This is done outside the commit
sequence from the userspace. This causes HUBP blank. Due to the blank
hubp, a non blocking commit which queues flip will encounter a timeout
waiting for the flip_done because prior to writing the surface flip
address, hubp was in blank.
[How] Add a marker to DM's crtc state and use this field to indicate
whether dpms was forced off during an HPD. Check for this marker before
queuing the flip.
Reviewed-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When ODM is enabled, ABM is blocked on dcn31 but unblocked on dcn30.
Since the dcn31 firmware is now able to handle ABM interop with ODM, it
is no longer necessary to block ABM when ODM is enabled.
Since the dcn30 firmware does not handle ABM interop with ODM, leaving
that combination unblocked can lead to one side of the screen appearing
brighter than the other.
[How]
When ODM is enabled, unblock abm on dcn31 and block it on dcn30
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, we will try to get dm.dc_lock in handle_hpd_rx_irq() when
link lost happened, which is risky and could cause deadlock.
e.g. If we are under procedure to enable MST streams and then monitor
happens to toggle short hpd to notify link lost, then
handle_hpd_rx_irq() will get blocked due to stream enabling flow has
dc_lock. However, under MST, enabling streams involves communication
with remote sinks which need to use handle_hpd_rx_irq() to handle
sideband messages. Thus, we have deadlock here.
[How]
Target is to have handle_hpd_rx_irq() finished as soon as possilble.
Hence we can react to interrupt quickly. Besides, we should avoid to
grabe dm.dc_lock within handle_hpd_rx_irq() to avoid deadlock situation.
Firstly, revert patches which introduced to use dm.dc_lock in
handle_hpd_rx_irq():
* commit ("drm/amd/display: NULL pointer error during ")
* commit ("drm/amd/display: Only one display lights up while using MST")
* commit ("drm/amd/display: take dc_lock in short pulse handler only")
Instead, create work to handle irq events which needs dm.dc_lock.
Besides:
* Create struct hpd_rx_irq_offload_work_queue for each link to handle
its short hpd events
* Avoid to handle link lost/ automated test if the link is disconnected
* Defer dc_lock needed works in dc_link_handle_hpd_rx_irq(). This
function should just handle simple stuff for us (e.g. DPCD R/W).
However, deferred works should still be handled by the order that
dc_link_handle_hpd_rx_irq() used to be.
* Change function name dm_handle_hpd_rx_irq() to
dm_handle_mst_sideband_msg() to be more specific
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Due to some code flow constraints, we need to defer dc_lock needed works
from dc_link_handle_hpd_rx_irq(). Thus, do following changes:
* Change allow_hpd_rx_irq() from static to public
* Change handle_automated_test() from static to public
* Extract link lost handling flow out from dc_link_handle_hpd_rx_irq()
and put those into a new function dc_link_dp_handle_link_loss()
* Add one option parameter to decide whether defer works within
dc_link_handle_hpd_rx_irq()
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
According to DP specs dfp cap ext validation is only for branch
device withou 128b/132b channel coding support and
downstream of the branch device doesn't have compression.
Therefore we are adding conditions to only do dfp cap
extension validation for branch devcie supporting 8b/10b
channel coding only and it has no DSC passthrough capability.
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Before get dsc bw range is used to compute DSC bw range
based on the given fixed bpp min/max input.
The new change will merge any specs, signal, timing specific
bpp range decision into this function. So the function needs to make
a decision with all aspects considered.
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DQE's promotion test, system hang issue is found on linux
system;
[How]
1. Add NULL pointor check for the link in the sequence trace
function;
2. Get the right link for the stream encoder before blank DP
stream;
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit "Revert "Add DPCD writes at key points" ".
The following patch will fix the system hang issue.
v2: squash in indentation warning fix
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DM needs to know how much overhead is added to DSC as result
of AMD internal DSC limitation.
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.
Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Direct IB pool is used for vce/vcn IB extra msg too. Increase its size
to AMDGPU_IB_POOL_SIZE.
v2: Squash in unused variable removal
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs
to maintain consistency with other asics. As cyan skillfish doesn't
support DPM, there is only a single frequency and voltage to adjust.
v2: maintain consistency and add command guide.
v3: adjust user settings storage and coding style.
Command guide:
echo vc point sclk vddc > pp_od_clk_voltage
"vc" - sclk voltage curve
"point" - must be 0
"sclk" - target value of sclk(MHz), should be in safe range
"vddc" - target value of vddc(mV), a 6.25(mV) stepping is
recommended and should be in safe range (the real
vddc is an approximation of target value)
echo c > pp_od_clk_voltage
"c" - commit the changes of sclk and vddc, only after
the commit command, the target values set by "vc"
command will take effect
echo r > pp_od_clk_voltage
"r" - reset sclk and vddc to default value, a subsequent
commit command is needed to take effect
Example:
1) Check default sclk and vddc
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 862mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
2) Set sclk to 1500MHz and vddc to 700mV
$ echo vc 0 1500 700 > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1500Mhz *
OD_VDDC:
0: 693mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
3) Reset sclk and vddc to default
$ echo r > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 874mV *
OD_RANGE:
SCLK: 1000Mhz 2000Mhz
VDDC: 700mV 1129mV
NOTE:
We don't specify an explicit safe range, you can set any values
between min and max at your own risk. Enjoy!
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add print_clk_levels and read_sensor pptable funcs for
cyan skilfish.
v2: keep consitency and add get_gpu_metrics callback.
v3: use sysfs_emit_at() in sysfs show function.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add SmuMetrics_t definition for cyan skilfish.
v2: update SmuMetrics_t definition.
v3: cleanup and rearrange the order of fields.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some PPSMC MSGs for cyan skilfish.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assert only when FPU is not enabled.
Fixes: 0ea7ee8217 ("drm/amd/display: Add DC_FP helper to check FPU state")
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added trigger error support for MP0/MP1/MPIO blocks
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove uncessary RAS status prints
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor the code of amdgpu_ucode_init_single_fw to make it more
readable as too many ucode need to handle on this function currently.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If we're running a headless config with 0 links then the vblank
workqueue will be NULL - causing a NULL pointer exception during
any commit.
[How]
Guard access to the workqueue if it's NULL and don't queue or flush
work if it is.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700
Fixes: 58aa1c50e5 ("drm/amd/display: Use vblank control events for PSR enable/disable")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable sysnode vclk and dclk on Navi21 asic for guest smi
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use debugfs_create_file_size API for creating ring debugfs, and as its a
NULL returning API, change the return type for amdgpu_debugfs_ring_init
API as well. Also cleanup surrounding code.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
debugfs APIs returns encoded error so use
IS_ERR for checking return value.
v2: return PTR_ERR(ent)
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-By: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This warning helps catch uninitialized variables. It should have been
enabled at the same time as commit b2423184ac ("drm/i915: Enable
-Wuninitialized") but I did not realize they were disabled separately.
Enable it now that i915 is clean so that it stays that way.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-4-nathan@kernel.org
(cherry picked from commit 43192617f7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Clang warns:
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:13: warning:
variable 'err' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
} else if (PTR_ERR(import) != -EOPNOTSUPP) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:138:9: note:
uninitialized use occurs here
return err;
^~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:9: note: remove
the 'if' if its condition is always true
} else if (PTR_ERR(import) != -EOPNOTSUPP) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:95:9: note:
initialize the variable 'err' to silence this warning
int err;
^
= 0
The test is expected to pass if i915_gem_prime_import() returns
-EOPNOTSUPP so initialize err to zero in this case.
Fixes: cdb35d1ed6 ("drm/i915/gem: Migrate to system at dma-buf attach time (v7)")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-3-nathan@kernel.org
(cherry picked from commit 46f20a353b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Clang warns a couple of times:
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:63:6: warning:
variable 'import_obj' is used uninitialized whenever 'if' condition is
true [-Wsometimes-uninitialized]
if (import != &obj->base) {
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:80:22: note:
uninitialized use occurs here
i915_gem_object_put(import_obj);
^~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:63:2: note: remove
the 'if' if its condition is always false
if (import != &obj->base) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:38:46: note:
initialize the variable 'import_obj' to silence this warning
struct drm_i915_gem_object *obj, *import_obj;
^
= NULL
Shuffle the import_obj initialization above these if statements so that
it is not used uninitialized.
Fixes: d7b2cb380b ("drm/i915/gem: Correct the locking and pin pattern for dma-buf (v8)")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-2-nathan@kernel.org
(cherry picked from commit 4796054b38)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This warning helps catch uninitialized variables. It should have been
enabled at the same time as commit b2423184ac ("drm/i915: Enable
-Wuninitialized") but I did not realize they were disabled separately.
Enable it now that i915 is clean so that it stays that way.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-4-nathan@kernel.org
Clang warns:
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:13: warning:
variable 'err' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
} else if (PTR_ERR(import) != -EOPNOTSUPP) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:138:9: note:
uninitialized use occurs here
return err;
^~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:9: note: remove
the 'if' if its condition is always true
} else if (PTR_ERR(import) != -EOPNOTSUPP) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:95:9: note:
initialize the variable 'err' to silence this warning
int err;
^
= 0
The test is expected to pass if i915_gem_prime_import() returns
-EOPNOTSUPP so initialize err to zero in this case.
Fixes: cdb35d1ed6 ("drm/i915/gem: Migrate to system at dma-buf attach time (v7)")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-3-nathan@kernel.org
Clang warns a couple of times:
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:63:6: warning:
variable 'import_obj' is used uninitialized whenever 'if' condition is
true [-Wsometimes-uninitialized]
if (import != &obj->base) {
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:80:22: note:
uninitialized use occurs here
i915_gem_object_put(import_obj);
^~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:63:2: note: remove
the 'if' if its condition is always false
if (import != &obj->base) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:38:46: note:
initialize the variable 'import_obj' to silence this warning
struct drm_i915_gem_object *obj, *import_obj;
^
= NULL
Shuffle the import_obj initialization above these if statements so that
it is not used uninitialized.
Fixes: d7b2cb380b ("drm/i915/gem: Correct the locking and pin pattern for dma-buf (v8)")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-2-nathan@kernel.org
The VESA Organization Vendor-Specific Data Block, defined in VESA
DisplayID Standard v2.0, specifies the eDP Multi-SST Operation (MSO)
stream count and segment pixel overlap.
DisplayID v1.3 has Appendix B: DisplayID as an EDID Extension,
describing how DisplayID sections may be embedded in EDID extension
blocks. DisplayID v2.0 does not have such a section, perhaps implying
that DisplayID v2.0 data should not be included in EDID extensions, but
rather in a "pure" DisplayID structure at its own DDC address pair
A4h/A5h, as described in VESA E-DDC Standard v1.3 chapter 3.
However, in practice, displays out in the field have embedded DisplayID
v2.0 data blocks in EDID extensions, including, in particular, some eDP
MSO displays, where a pure DisplayID structure is not available at all.
Parse the MSO data from the DisplayID data block. Do it as part of
drm_add_display_info(), extending it to parse also DisplayID data to
avoid requiring extra calls to update the information.
v2: Check for VESA OUI (Ville)
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73ca2887e7b37880690f5c9ba4594c9cd1170669.1630419362.git.jani.nikula@intel.com
Display drivers so far need to have a lot of boilerplate to first
retrieve either the panel or bridge that they are connected to using
drm_of_find_panel_or_bridge(), and then either deal with each with ad-hoc
functions or create a drm panel bridge through drm_panel_bridge_add.
In order to reduce the boilerplate and hopefully create a path of least
resistance towards using the DRM panel bridge layer, let's create the
function devm_drm_of_get_bridge() to reduce that boilerplate.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-2-maxime@cerno.tech
Seeing these errors when GT is likely in suspend state-
"RPM wakelock ref not held during HW access"
Ensure GT is awake before trying to access HW registers. Avoid
reading the register if that is not the case.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Fixes: 41e5c17ebf ("drm/i915/guc/slpc: Sysfs hooks for SLPC")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907232704.12982-1-vinay.belgaumkar@intel.com
(cherry picked from commit f25e3908b9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
gem context refcounting is another exercise in least locking design it
seems, where most things get destroyed upon context closure (which can
race with anything really). Only the actual memory allocation and the
locks survive while holding a reference.
This tripped up Jason when reimplementing the single timeline feature
in
commit 00dae4d3d3
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:12 2021 -0500
drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)
We could fix the bug by holding ctx->mutex in execbuf and clear the
pointer (again while holding the mutex) context_close, but it's
cleaner to just make the context object actually invariant over its
_entire_ lifetime. This way any other ioctl that's potentially racing,
but holding a full reference, can still rely on ctx->syncobj being
an immutable pointer. Which without this change, is not the case.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: 00dae4d3d3 ("drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-2-daniel.vetter@ffwll.ch
(cherry picked from commit c238980efd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Using the I915_MMAP_TYPE_FIXED mmap type requires the TTM backend, so
for that mmap type, use __i915_gem_object_create_user() instead of
i915_gem_object_create_internal(), as we really want to tests objects
mmap-able by user-space.
This also means that the out-of-space error happens at object creation
and returns -ENXIO rather than -ENOSPC, so fix the code up to expect
that on out-of-offset-space errors.
Finally only use I915_MMAP_TYPE_FIXED for LMEM and SMEM for now if
testing on LMEM-capable devices. For stolen LMEM, we still take the
same path as for integrated, as that haven't been moved over to TTM yet,
and user-space should not be able to create out of stolen LMEM anyway.
v2:
- Check the presence of the obj->ops->mmap_offset callback rather than
hardcoding the supported mmap regions in can_mmap() (Maarten Lankhorst)
Fixes: 7961c5b60f ("drm/i915: Add TTM offset argument to mmap.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831122931.157536-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 450cede7f3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The function is only used from within GEM_BUG_ON(), which is causing
warnings with Wunneeded-internal-declaration in some builds. Since the
function is a simple wrapper around a CT function, we can just call the
CT function directly instead.
Fixes: 1fb12c5871 ("drm/i915/guc: skip disabling CTBs before sanitizing the GuC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210823163137.19770-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 5db1856781)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Users reported that after commit 2bbd6dba84 ("drm/i915: Try to use
fast+narrow link on eDP again and fall back to the old max strategy on
failure"), the screen starts to have wobbly effect.
Commit a5c936add6 ("drm/i915/dp: Use slow and wide link training for
everything") doesn't help either, that means the affected eDP 1.2 panels
only work with max params.
So use max params for panels < eDP 1.4 as Windows does to solve the
issue.
v3:
- Do the eDP rev check in intel_edp_init_dpcd()
v2:
- Check eDP 1.4 instead of DPCD 1.1 to apply max params
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3714
Fixes: 2bbd6dba84 ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure")
Fixes: a5c936add6 ("drm/i915/dp: Use slow and wide link training for everything")
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820075301.693099-1-kai.heng.feng@canonical.com
(cherry picked from commit d7f213c131)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
After DPRX link training, intel_dp_link_train_phy() did not
return the training result properly. If link training failed,
i915 driver would not run into link train fallback function.
And no hotplug uevent would be received by user space application.
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706152541.25021-1-shawn.c.lee@intel.com
(cherry picked from commit dab1b47e57)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add GuC kernel doc for all structures added thus far for GuC submission
and update the main GuC submission section with the new interface
details.
v2:
- Drop guc_active.lock DOC
v3:
- Fixup a few kernel doc comments (Daniele)
v4 (Daniele):
- Implement doc suggestions from John
- Add kerneldoc for all members of the GuC structure and pull the file
in i915.rst
v5 (Daniele):
- Implement new doc suggestions from John
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-24-matthew.brost@intel.com
Now that we have locking hierarchy of sched_engine->lock ->
ce->guc_state everything from guc_active can be moved into guc_state and
protected the guc_state.lock.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-23-matthew.brost@intel.com
To make ownership of locking clear move fields (guc_id, guc_id_ref,
guc_id_link) to sub structure guc_id in intel_context.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-22-matthew.brost@intel.com
Move GuC management fields in context under guc_active struct as this is
where the lock that protects theses fields lives. Also only set guc_prio
field once during context init.
v2:
(Daniele)
- set CONTEXT_SET_INIT
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-21-matthew.brost@intel.com
Drop pin count check trick between a sched_disable and re-pin, now rely
on the lock and counter of the number of committed requests to determine
if scheduling should be disabled on the context.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-20-matthew.brost@intel.com
Lock the xarray and take ref to the context if needed.
v2:
(Checkpatch)
- Add new line after declaration
(Daniel Vetter)
- Correct put / get accounting in xa_for_loops
v3:
(Checkpatch)
- Extra new line
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-19-matthew.brost@intel.com
Rework and simplify the locking with GuC subission. Drop
sched_state_no_lock and move all fields under the guc_state.sched_state
and protect all these fields with guc_state.lock . This requires
changing the locking hierarchy from guc_state.lock -> sched_engine.lock
to sched_engine.lock -> guc_state.lock.
v2:
(Daniele)
- Don't check fields outside of lock during sched disable, check less
fields within lock as some of the outside are no longer needed
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-18-matthew.brost@intel.com
Move guc_blocked fence to struct guc_state as the lock which protects
the fence lives there.
s/ce->guc_blocked/ce->guc_state.blocked/g
v2:
(Daniele)
- s/blocked_fence/blocked/g
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-17-matthew.brost@intel.com
A subsequent patch will flip the locking hierarchy from
ce->guc_state.lock -> sched_engine->lock to sched_engine->lock ->
ce->guc_state.lock. As such we need to release the submit fence for a
request from an IRQ to break a lock inversion - i.e. the fence must be
release went holding ce->guc_state.lock and the releasing of the can
acquire sched_engine->lock.
v2:
(Daniele)
- Delete request from list before calling irq_work_queue
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-16-matthew.brost@intel.com
Reset LRC descriptor if a context register returns -ENODEV as this means
we are mid-reset.
Fixes: eb5e7da736 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-15-matthew.brost@intel.com
Before we did some clever tricks to not use the a lock when touching
guc_state.sched_state in certain cases. Don't do that, enforce the use
of the lock.
v2:
(kernel test robo )
- Add __maybe_unused to sched_state_is_init()
v3: rebase after the unused code path removal has been moved to an
earlier patch.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-14-matthew.brost@intel.com
A context can get destroyed after cancelling a request, if a context or
GT reset occurs, so take a reference to context when cancelling a
request.
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-13-matthew.brost@intel.com
While debugging an issue with full GT resets I went down a rabbit hole
thinking the scrubbing of lost G2H wasn't working correctly. This proved
to be incorrect as this was working just fine but this chase inspired me
to write a selftest to prove that this works. This simple selftest
injects errors dropping various G2H and then issues a full GT reset
proving that the scrubbing of these G2H doesn't blow up.
v2:
(Daniel Vetter)
- Use ifdef instead of macros for selftests
v3:
(Checkpatch)
- A space after 'switch' statement
v4:
(Daniele)
- A comment saying GT won't idle if G2H are lost
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-12-matthew.brost@intel.com
When the GuC does a media reset, it copies a golden context state back
into the corrupted context's state. The address of the golden context
and the size of the engine state restore are passed in via the GuC ADS.
The i915 had a bug where it passed in the whole size of the golden
context, not the size of the engine state to restore resulting in a
memory corruption.
Also copy the entire golden context on init rather than just the engine
state that is restored.
v2 (Daniele): use defines to avoid duplicated const variables (John).
Fixes: 481d458cae ("drm/i915/guc: Add golden context to GuC ADS")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-11-matthew.brost@intel.com
When unblocking a context, do not enable scheduling if the context is
banned, guc_id invalid, or not registered.
v2:
(Daniele)
- Add helper for unblock
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-10-matthew.brost@intel.com
Kick tasklet after queuing a request so it submitted in a timely manner.
Fixes: 3a4cdf1982 ("drm/i915/guc: Implement GuC context operations for new inteface")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-9-matthew.brost@intel.com
Propagating errors to dependent fences is broken and can lead to errors
from one client ending up in another. In commit 3761baae90 ("Revert
"drm/i915: Propagate errors on awaiting already signaled fences""), we
attempted to get rid of fence error propagation but missed the case
added in commit 8e9f84cf5c ("drm/i915/gt: Propagate change in error
status to children on unhold"). Revert that one too. This error was
found by an up-and-coming selftest which triggers a reset during
request cancellation and verifies that subsequent requests complete
successfully.
v2:
(Daniel Vetter)
- Use revert
v3:
(Jason)
- Update commit message
v4 (Daniele):
- fix checkpatch error in commit message.
References: '3761baae908a ("Revert "drm/i915: Propagate errors on awaiting already signaled fences"")'
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-8-matthew.brost@intel.com
If the context is reset as a result of the request cancellation the
context reset G2H is received after schedule disable done G2H which is
the wrong order. The schedule disable done G2H release the waiting
request cancellation code which resubmits the context. This races
with the context reset G2H which also wants to resubmit the context but
in this case it really should be a NOP as request cancellation code owns
the resubmit. Use some clever tricks of checking the context state to
seal this race until the GuC firmware is fixed.
v2:
(Checkpatch)
- Fix typos
v3:
(Daniele)
- State that is a bug in the GuC firmware
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-7-matthew.brost@intel.com
Rather than processing 1 G2H at a time and re-queuing the work queue if
more messages exist, process all the G2H in a single pass of the work
queue.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-6-matthew.brost@intel.com
Don't drop ce->guc_active.lock when unwinding a context after reset.
At one point we had to drop this because of a lock inversion but that is
no longer the case. It is much safer to hold the lock so let's do that.
Fixes: eb5e7da736 ("drm/i915/guc: Reset implementation for new GuC interface")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-5-matthew.brost@intel.com
When unwinding requests on a reset context, if other requests in the
context are in the priority list the requests could be resubmitted out
of seqno order. Traverse the list of active requests in reverse and
append to the head of the priority list to fix this.
Fixes: eb5e7da736 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-4-matthew.brost@intel.com
A small race that could result in incorrect accounting of the number
of outstanding G2H. Basically prior to this patch we did not increment
the number of outstanding G2H if we encoutered a GT reset while sending
a H2G. This was incorrect as the context state had already been updated
to anticipate a G2H response thus the counter should be incremented.
As part of this change we remove a legacy (now unused) path that was the
last caller requiring a G2H response that was not guaranteed to loop.
This allows us to simplify the accounting as we don't need to handle the
case where the send fails due to the channel being busy.
Also always use helper when decrementing this value.
v2 (Daniele): update GEM_BUG_ON check, pull in dead code removal from
later patch, remove loop param from context_deregister.
Fixes: f4eb1f3fe9 ("drm/i915/guc: Ensure G2H response has space in buffer")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-3-matthew.brost@intel.com
Prior to this patch the blocked context counter was cleared on
init_sched_state (used during registering a context & resets) which is
incorrect. This state needs to be persistent or the counter can read the
incorrect value resulting in scheduling never getting enabled again.
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-2-matthew.brost@intel.com
As the APIs related to ww lock in i915 was changed recently, the usage of
ww lock in GVT-g scheduler needs to be changed accrodingly. We noticed a
deadlock when GVT-g scheduler submits the workload to i915. After some
investigation, it seems the way of how to use ww lock APIs has been
changed. Releasing a ww now requires a explicit i915_gem_ww_ctx_fini().
Fixes: 67f1120381 ("drm/i915/gvt: Introduce per object locking in GVT scheduler.")
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi A Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210826143834.25410-1-zhi.a.wang@intel.com
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135644.4576-1-caihuoqing@baidu.com
Valve's Steam Deck has a 800x1280 LCD screen.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Jared Baldridge <jrb@expunge.us>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210911102430.253986-1-contact@emersion.fr
Seeing these errors when GT is likely in suspend state-
"RPM wakelock ref not held during HW access"
Ensure GT is awake before trying to access HW registers. Avoid
reading the register if that is not the case.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Fixes: 41e5c17ebf ("drm/i915/guc/slpc: Sysfs hooks for SLPC")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907232704.12982-1-vinay.belgaumkar@intel.com
ttm:
- Fix ttm_bo_move_memcpy() when ttm_resource is subclassed.
- Fix ttm deadlock if target BO isn't idle
- ttm build fix
- ttm docs fix
dma-buf:
- config option fixes
fbdev:
- limit resolutions to avoid int overflow
i915:
- stddef change.
amdgpu:
- Misc cleanups, typo fixes
- EEPROM fix
- Add some new PCI IDs
- Scatter/Gather display support for Yellow Carp
- PCIe DPM fix for RKL platforms
- RAS fix
amdkfd:
- SVM fix
vc4:
- static function fix
mgag200:
- fix uninit var
panfrost:
- lock_region fixes
- Make some dma-buf config options depend on DMA_SHARED_BUFFER.
- Handle multiplication overflow of fbdev xres/yres in the core.
-----BEGIN PGP SIGNATURE-----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=R62Q
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just an initial bunch of fixes for the merge window, amdgpu is most of
them with a few ttm fixes and an fbdev avoid multiply overflow fix.
core:
- Make some dma-buf config options depend on DMA_SHARED_BUFFER
- Handle multiplication overflow of fbdev xres/yres in the core
ttm:
- Fix ttm_bo_move_memcpy() when ttm_resource is subclassed
- Fix ttm deadlock if target BO isn't idle
- ttm build fix
- ttm docs fix
dma-buf:
- config option fixes
fbdev:
- limit resolutions to avoid int overflow
i915:
- stddef change.
amdgpu:
- Misc cleanups, typo fixes
- EEPROM fix
- Add some new PCI IDs
- Scatter/Gather display support for Yellow Carp
- PCIe DPM fix for RKL platforms
- RAS fix
amdkfd:
- SVM fix
vc4:
- static function fix
mgag200:
- fix uninit var
panfrost:
- lock_region fixes"
* tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm: (36 commits)
drm/ttm: Fix a deadlock if the target BO is not idle during swap
fbmem: don't allow too huge resolutions
dma-buf: DMABUF_SYSFS_STATS should depend on DMA_SHARED_BUFFER
dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER
drm/i915: use linux/stddef.h due to "isystem: trim/fixup stdarg.h and other headers"
dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER
drm/amdkfd: drop process ref count when xnack disable
drm/amdgpu: enable more pm sysfs under SRIOV 1-VF mode
drm/amdgpu: fix fdinfo race with process exit
drm/amdgpu: Fix a deadlock if previous GEM object allocation fails
drm/amdgpu: stop scheduler when calling hw_fini (v2)
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amd/display: Initialize lt_settings on instantiation
drm/amd/display: cleanup idents after a revert
drm/amd/display: Fix memory leak reported by coverity
drm/ttm: Fix ttm_bo_move_memcpy() for subclassed struct ttm_resource
drm/amdgpu/swsmu: fix spelling mistake "minimun" -> "minimum"
drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform
drm/amdgpu: show both cmd id and name when psp cmd failed
drm/amd/display: setup system context for APUs
...
Usage of Transparent Hugepages was disabled in 9987da4b5d
("drm/i915: Disable THP until we have a GPU read BW W/A"), but since it
appears majority of performance regressions reported with an enabled IOMMU
can be almost eliminated by turning them on, lets just do that.
To err on the side of safety we keep the current default in cases where
IOMMU is not active, and only when it is default to the "huge=within_size"
mode. Although there probably would be wins to enable them throughout,
more extensive testing across benchmarks and platforms would need to be
done.
With the patch and IOMMU enabled my local testing on a small Skylake part
shows OglVSTangent regression being reduced from ~14% (IOMMU on versus
IOMMU off) to ~2% (same comparison but with THP on).
More detailed testing done in the below referenced Gitlab issue by Eero:
Skylake GT4e:
Performance drops from enabling IOMMU:
30-35% SynMark CSDof
20-25% Unigine Heaven, MemBW GPU write, SynMark VSTangent
~20% GLB Egypt (1/2 screen window)
10-15% GLB T-Rex (1/2 screen window)
8-10% GfxBench T-Rex, MemBW GPU blit
7-8% SynMark DeferredAA + TerrainFly* + ZBuffer
6-7% GfxBench Manhattan 3.0 + 3.1, SynMark TexMem128 & CSCloth
5-6% GfxBench CarChase, Unigine Valley
3-5% GfxBench Vulkan & GL AztecRuins + ALU2, MemBW GPU texture,
SynMark Fill*, Deferred, TerrainPan*
1-2% Most of the other tests
With the patch drops become:
20-25% SynMark TexMem*
15-20% GLB Egypt (1/2 screen window)
10-15% GLB T-Rex (1/2 screen window)
4-7% GfxBench T-Rex, GpuTest Triangle
1-8% GfxBench ALU2 (offscreen 1%, onscreen 8%)
3% GfxBench Manhattan 3.0, SynMark CSDof
2-3% Unigine Heaven + Valley, MemBW GPU texture
1-3 GfxBench Manhattan 3.1 + CarChase + Vulkan & GL AztecRuins
Broxton:
Performance drops from IOMMU, without patch:
30% MemBW GPU write
25% SynMark ZBuffer + Fill*
20% MemBW GPU blit
15% MemBW GPU blend, GpuTest Triangle
10-15% MemBW GPU texture
10% GLB Egypt, Unigine Heaven (had hangs), SynMark TerrainFly*
7-9% GLB T-Rex, GfxBench Manhattan 3.0 + T-Rex,
SynMark Deferred* + TexMem*
6-8% GfxBench CarChase, Unigine Valley,
SynMark CSCloth + ShMapVsm + TerrainPan*
5-6% GfxBench Manhattan 3.1 + GL AztecRuins,
SynMark CSDof + TexFilterTri
2-4% GfxBench ALU2, SynMark DrvRes + GSCloth + ShMapPcf + Batch[0-5] +
TexFilterAniso, GpuTest GiMark + 32-bit Julia
And with patch:
15-20% MemBW GPU texture
10% SynMark TexMem*
8-9% GLB Egypt (1/2 screen window)
4-5% GLB T-Rex (1/2 screen window)
3-6% GfxBench Manhattan 3.0, GpuTest FurMark,
SynMark Deferred + TexFilterTri
3-4% GfxBench Manhattan 3.1 + T-Rex, SynMark VSInstancing
2-4% GpuTest Triangle, SynMark DeferredAA
2-3% Unigine Heaven + Valley
1-3% SynMark Terrain*
1-2% GfxBench CarChase, SynMark TexFilterAniso + ZBuffer
Tigerlake-H:
20-25% MemBW GPU texture
15-20% GpuTest Triangle
13-15% SynMark TerrainFly* + DeferredAA + HdrBloom
8-10% GfxBench Manhattan 3.1, SynMark TerrainPan* + DrvRes
6-7% GfxBench Manhattan 3.0, SynMark TexMem*
4-8% GLB onscreen Fill + T-Rex + Egypt (more in onscreen than
offscreen versions of T-Rex/Egypt)
4-6% GfxBench CarChase + GLES AztecRuins + ALU2, GpuTest 32-bit Julia,
SynMark CSDof + DrvState
3-5% GfxBench T-Rex + Egypt, Unigine Heaven + Valley, GpuTest Plot3D
1-7% Media tests
2-3% MemBW GPU blit
1-3% Most of the rest of 3D tests
With the patch:
6-8% MemBW GPU blend => the only regression in these tests (compared
to IOMMU without THP)
4-6% SynMark DrvState (not impacted) + HdrBloom (improved)
3-4% GLB T-Rex
~3% GLB Egypt, SynMark DrvRes
1-3% GfxBench T-Rex + Egypt, SynMark TexFilterTri
1-2% GfxBench CarChase + GLES AztecRuins, Unigine Valley,
GpuTest Triangle
~1% GfxBench Manhattan 3.0/3.1, Unigine Heaven
Perf of several tests actually improved with IOMMU + THP, compared to no
IOMMU / no THP:
10-15% SynMark Batch[0-3]
5-10% MemBW GPU texture, SynMark ShMapVsm
3-4% SynMark Fill* + Geom*
2-3% SynMark TexMem512 + CSCloth
1-2% SynMark TexMem128 + DeferredAA
As a summary across all platforms, these are the benchmarks where enabling
THP on top of IOMMU enabled brings regressions:
* Skylake GT4e:
20-25% SynMark TexMem*
(whereas all MemBW GPU tests either improve or are not affected)
* Broxton J4205:
7% MemBW GPU texture
2-3% SynMark TexMem*
* Tigerlake-H:
7% MemBW GPU blend
Other benchmarks show either lowering of regressions or improvements.
v2:
* Add Kconfig dependency to transparent hugepages and some help text.
* Move to helper for easier handling of kernel build options.
v3:
* Drop Kconfig. (Daniel)
v4:
* Add some benchmark results to commit message.
v5:
* Add explicit regression summary to commit message. (Eero)
References: b901bb8932 ("drm/i915/gemfs: enable THP")
References: 9987da4b5d ("drm/i915: Disable THP until we have a GPU read BW W/A")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/430
Co-developed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909114448.508493-1-tvrtko.ursulin@linux.intel.com
The ret value might be -EBUSY, caller will think lru lock is still
locked but actually NOT. So return -ENOSPC instead. Otherwise we hit
list corruption.
ttm_bo_cleanup_refs might fail too if BO is not idle. If we return 0,
caller(ttm_tt_populate -> ttm_global_swapout ->ttm_device_swapout) will
be stuck as we actually did not free any BO memory. This usually happens
when the fence is not signaled for a long time.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: ebd59851c7 ("drm/ttm: move swapout logic around v3")
Link: https://patchwork.freedesktop.org/patch/msgid/20210907040832.1107747-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Defines plane ordering by hard-coding an immutable Z position from the
first plane, used as primary layer, to the next ones as overlay in order
of instantiation.
This zpos is only an information as it is not possible to modify it,
blending operations are still applied from the top to the bottom layer.
This patch helps to remove a warning message from the Android
Hardware Composer.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907151323.5850-1-raphael.gallais-pou@foss.st.com
On some Cherry Trail devices, DisplayPort over Type-C is supported through
a USB-PD microcontroller (e.g. a fusb302) + a mux to switch the superspeed
datalines between USB-3 and DP (e.g. a pi3usb30532). The kernel in this
case does the PD/alt-mode negotiation itself, rather then everything being
handled in firmware.
So the kernel itself picks an alt-mode, tells the Type-C "dongle" to switch
to DP mode and sets the mux accordingly. In this setup the HPD pin is not
connected, so the i915 driver needs to respond to a software event and scan
the DP port for changes manually.
This commit adds support for this. Together with the recent addition of
DP alt-mode support to the Type-C subsystem this makes DP over Type-C
work on these devices.
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210817215201.795062-7-hdegoede@redhat.com
On Intel platforms we know that the ACPI connector device
node order will follow the order the driver (i915) decides.
The decision is made using the custom Intel ACPI OpRegion
(intel_opregion.c), though the driver does not actually know
that the values it sends to ACPI there are used for
associating a device node for the connectors, and assigning
address for them.
In reality that custom Intel ACPI OpRegion actually violates
ACPI specification (we supply dynamic information to objects
that are defined static, for example _ADR), however, it
makes assigning correct connector node for a connector entry
straightforward (it's one-on-one mapping).
Changes in v2 (Hans de goede):
- Take a reference on the fwnode which we assign to the connector,
for ACPI nodes this is a no-op but in the future we may see
software-fwnodes assigned to connectors which are ref-counted.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210817215201.795062-6-hdegoede@redhat.com
On some MST docking stations, rx_info can only be read after
RepeaterAuth_Send_ReceiverID_List and the RxStatus READY bit is set
otherwise the read will return -EIO.
This behavior causes the mst stream type1 capability test to fail to
read rx_info and determine if the topology supports type1 and fallback
to type0.
To fix this, check for type1 capability when we receive rx_info within
the AKE flow when we read RepeaterAuth_Send_ReceiverID_List instead
of an explicit read just for type1 capability checking.
This does require moving where we set stream_types to after
hdcp2_authenticate_sink() when we get rx_info but this occurs before we
do hdcp2_propagate_stream_management_info.
Also, legacy HDCP 2.0/2.1 are not type 1 capable either so check for
that as well.
Changes since v5:
- rename intel_set_stream_types() to intel_hdcp_prepare_streams()
(Anshuman)
Changes since v4:
- move topology_type1_capable to intel_digital_port and rename it as
hdcp_mst_type1_capable (Anshuman)
- make a helper function intel_set_stream_types() to set stream types
in hdcp2_authenticate_and_encrypt() (Anshuman)
- break on failure to set stream types and retry instead of returning
- remove no longer used declaration for streams_type1_capable()
Changes since v2:
- Remove no longer used variables in _intel_hdcp2_enable()
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Tested-by: Suraj K <suraj.kandpal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819184835.1181323-4-juston.li@intel.com
When reading RepeaterAuth_Send_ReceiverID_List, RxInfo is read by itself
once to retrieve the DEVICE_COUNT to calculate the size of the
ReceiverID list then read a second time as a part of reading ReceiverID
list.
On some MST docking stations, RxInfo can only be read after the RxStatus
READY bit is set otherwise the read will return -EIO. The spec states that
the READY bit should be cleared as soon as RxInfo has been read.
In this case, the first RxInfo read succeeds but after the READY bit is
cleared, the second read fails.
Fix it by reading RxInfo once and storing it before reading the rest of
RepeaterAuth_Send_ReceiverID_List once we know the size.
Modify get_receiver_id_list_size() to read and store RxInfo in the
message buffer and also parse DEVICE_COUNT so we know the size of
RepeaterAuth_Send_ReceiverID_List.
Afterwards, retrieve the rest of the message at the offset for
seq_num_V.
Changes in v5:
- Don't change the offset define for Send_ReceiverID_List
When reading, update message offset to account for RxInfo being read
Changes in v4:
- rebase and edit commit message
Changes in v3:
- remove comment
Changes in v2:
- remove unnecessary moving of drm_i915_private from patch 1
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Tested-by: Suraj K <suraj.kandpal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819184835.1181323-3-juston.li@intel.com
Update cp_irq_count_cached when reading messages rather than when
writing a message to make sure the value is up to date and not
stale from a previously handled CP_IRQ.
AKE flow doesn't always respond to a read with a ACK write msg.
E.g. AKE_Send_Pairing_Info will "timeout" because we received
a CP_IRQ for reading AKE_Send_H_Prime but no write occurred between that
and reading AKE_Send_Pairing_Info so cp_irq_count_cached is stale
causing the wait to return right away rather than waiting for a new
CP_IRQ.
Signed-off-by: Juston Li <juston.li@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Suraj K <suraj.kandpal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819184835.1181323-2-juston.li@intel.com
Driver has to swap the endian before send brightness level value
to tcon.
v2: Use __be16 instead of u16 to fix sparse warning.
v3: Send one or two bytes brightness value depend on the precision.
v4: get data length of brightness value more easily.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908115607.9633-6-shawn.c.lee@intel.com
So far, DCS backlight driver hardcode (0xFF) for max brightness level.
MIPI DCS spec allow max 0xFFFF for set_display_brightness (51h) command.
And VBT brightness precision bits can support 8 ~ 16 bits.
We should set correct precision bits in VBT that meet panel's request.
Driver can refer to this setting then configure max brightness level
in DCS backlight driver properly.
v2: modify variable name brightness_precision_bits instead of
max_brightness_level.
v3: fix checkpatch warning.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908115607.9633-5-shawn.c.lee@intel.com
VDSC engine can process only 1 pixel per Cd clock. In case
VDSC is used and max slice count == 1, max supported pixel
clock should be 100% of CD clock. Then do min_cdclk and
pixel clock comparison to get proper min cdclk.
v2:
- Check for dsc enable and slice count ==1 then allow to
double confirm min cdclk value.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908115607.9633-4-shawn.c.lee@intel.com
According to chapter "Sending Commands to the Panel" in bspec #29738
and #49188. If driver try to send DCS long pakcet, we have to program
TX payload register at first. And configure TX header HW register later.
DSC long packet would not be sent properly if we don't follow this
sequence.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908115607.9633-3-shawn.c.lee@intel.com
Driver should wait for free header or payload buffer in FIFO.
It would be good to wait a while for HW to release credit before
give it up to write to HW. Without sending initailize command
sets completely. It would caused MIPI display can't light up properly.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210908115607.9633-2-shawn.c.lee@intel.com
Since the object might still be active here, the shrink_all will simply
ignore it, which blows up in the test, since the pages will still be
there. Currently THP is disabled which should result in the test being
skipped, but if we ever re-enable THP we might start seeing the failure.
Fix this by forcing I915_SHRINK_ACTIVE.
v2: Some machine in the shard runs doesn't seem to have any available
swap when running this test. Try to handle this.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906091729.2093312-1-matthew.auld@intel.com
If we need to mark the PDE as operating in 64K GTT mode, we should be
paranoid and flush the extra writes, like we already do for the PTEs. On
some platforms the clflush can apparently add the just the right amount
of magical delay to force the GPU to see the updated entry.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903155317.1854012-1-matthew.auld@intel.com
MOCS table of TGL/RKL has MOCS[1] set to L3_UC.
While for other gen12 devices we need to set MOCS[1] as L3_WB,
So adding a new MOCS table for other gen 12 devices eg. ADL.
Fixes: cfbe5291a1 ("drm/i915/gt: Initialize unused MOCS entries with device specific values")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mattrope: fix whitespace error]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907171639.1221287-1-ayaz.siddiqui@intel.com
Frontbuffer rendering will be dropped for modern platforms but
before that we to prepare DRRS for it.
intel_drrs_flush and intel_drrs_invalidate will not be called
for platforms that will not support frontbuffer rendering so DRRS
needs another way to be notified about to page flips so it can change
between high and low refresh rates as needed.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903221036.34770-3-jose.souza@intel.com
Both functions are pretty much equal, with minor changes that can be
handled by a single parameter.
v3:
- not scheduling work from invalidate operations
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903221036.34770-2-jose.souza@intel.com
It started as a code style fix for the lines above 100 col but it
turned out to simplifications to intel_drrs_set_state().
Now it receives the desired refresh rate type, high or low.
v3:
- Fixed the mode refesh rate debug message
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903221036.34770-1-jose.souza@intel.com
This symbols is not used outside of dc_link_dp.c, so marks it static.
Fix the following sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:1766:16:
warning: symbol 'configure_lttpr_mode_non_transparent' was not declared.
Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:1755:16:
warning: symbol 'configure_lttpr_mode_transparent' was not declared.
Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variables hi_sidd and lo_sidd are being initialized with a values
that are never read, they are being updated later on. The assignments
are redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On
failure this logs a warning to the kernel journal. However warnings
shouldn't be used for atomic test-only commit failures: user-space
might be perfoming a lot of atomic test-only commits to find the
best hardware configuration.
Downgrade the log to a regular DRM atomic message. While at it, use
the new device-aware logging infrastructure.
This fixes error messages in the kernel when running gamescope [1].
[1]: https://github.com/Plagman/gamescope/issues/245
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, refactor the code a bit to use the purpose specific kcalloc()
function instead of the calculated size argument in the kzalloc()
function.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a statement that is indented incorrectly. Clean it up.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a couple of statements that are indented one character
too deeply, clean these up.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just drop some dead code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The memory backing old_mem is already freed at that point, move the
check a bit more up.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1699
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Creat common PSP TA load function and update PSP ta_mem_context
with size information.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the issue of uploading powerplay table due to the dependancy of rlc.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing force probe protection from ADLS platform. Did
not observe warnings, errors, flickering or any visual
defects while doing ordinary tasks like browsing and
editing documents in a two monitor setup.
For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/bat-all.html?
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: ravitejax <ravitejax.goud.talla@intel.com>
Reviewed-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903182034.668467-1-ravitejax.gpud.talla@intel.com
drm_sched_job_cleanup() will pass an uninitialized fence to
drm_sched_fence_free(), which will cause to_drm_sched_fence() to return
a NULL fence object, causing a NULL pointer deref when this NULL object
is passed to kmem_cache_free().
Let's create a new drm_sched_fence_free() function that takes a
drm_sched_fence pointer and suffix the old function with _rcu. While at
it, complain if drm_sched_fence_free() is passed an initialized fence
or if drm_sched_fence_free_rcu() is passed an uninitialized fence.
Fixes: dbe48d030b ("drm/sched: Split drm_sched_job_init")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903120554.444101-1-boris.brezillon@collabora.com
Avoid extra caching of the data. This is slightly more subtle than one
would think. For one thing, we explicitly ignore 0 value in child device
ddc pin; this is specified as N/A and does not warrant a warning. For
another, we start looking for ddc pin collisions in sanitize using
unmapped pin numbering.
v2: Check !devdata in intel_bios_alternate_ddc_pin()
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1dbf7cbdd2191439e760ab9098242dcec5fbb2e.1630512523.git.jani.nikula@intel.com
The full audit is quite a bit of work:
- i915_dpt has very simple lifetime (somehow we create a display pagetable vm
per object, so its _very_ simple, there's only ever a single vma in there),
and uses i915_vm_close(), which internally does a i915_vm_put(). No rcu.
Aside: wtf is i915_dpt doing in the intel_display.c garbage collector as a new
feature, instead of added as a separate file with some clean-ish interface.
Also, i915_dpt unfortunately re-introduces some coding patterns from
pre-dma_resv_lock conversion times.
- i915_gem_proto_ctx is fully refcounted and no rcu, all protected by
fpriv->proto_context_lock.
- i915_gem_context is itself rcu protected, and that might leak to anything it
points at. Before
commit cf977e1861
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Dec 2 11:21:40 2020 +0000
drm/i915/gem: Spring clean debugfs
and
commit db80a1294c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Jan 18 11:08:54 2021 +0000
drm/i915/gem: Remove per-client stats from debugfs/i915_gem_objects
we had a bunch of debugfs files that relied on rcu protecting everything, but
those are gone now. The main one was removed even earlier with
There doesn't seem to be anything left that's actually protecting
stuff now that the ctx->vm itself is invariant. See
commit ccbc1b9794
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:30 2021 -0500
drm/i915/gem: Don't allow changing the VM on running contexts (v4)
Note that we drop the vm refcount before the final release of the gem context
refcount, so this is all very dangerous even without rcu. Note that aside from
later on creating new engines (a defunct feature) and debug output we're never
looked at gem_ctx->vm for anything functional, hence why this is ok.
Fingers crossed.
Preceeding patches removed all vestiges of rcu use from gem_ctx->vm
derferencing to make it clear it's really not used.
The gem_ctx->rcu protection was introduced in
commit a4e7ccdac3
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 4 14:40:09 2019 +0100
drm/i915: Move context management under GEM
The commit message is somewhat entertaining because it fails to
mention this fact completely, and compensates that by an in-commit
changelog entry that claims that ctx->vm is protected by ctx->mutex.
Which was the case _before_ this commit, but no longer after it.
- intel_context holds a full reference. Unfortunately intel_context is also rcu
protected and the reference to the ->vm is dropped before the
rcu barrier - only the kfree is delayed. So again we need to check
whether that leaks anywhere on the intel_context->vm. RCU is only
used to protect intel_context sitting on the breadcrumb lists, which
don't look at the vm anywhere, so we are fine.
Nothing else relies on rcu protection of intel_context and hence is
fully protected by the kref refcount alone, which protects
intel_context->vm in turn.
The breadcrumbs rcu usage was added in
commit c744d50363
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 26 14:04:06 2020 +0000
drm/i915/gt: Split the breadcrumb spinlock between global and contexts
its parent commit added the intel_context rcu protection:
commit 14d1eaf088
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 26 14:04:05 2020 +0000
drm/i915/gt: Protect context lifetime with RCU
given some credence to my claim that I've actually caught them all.
- drm_i915_gem_object's shares_resv_from pointer has a full refcount to the
dma_resv, which is a sub-refcount that's released after the final
i915_vm_put() has been called. Safe.
Aside: Maybe we should have a struct dma_resv_shared which is just dma_resv +
kref as a stand-alone thing. It's a pretty useful pattern which other drivers
might want to copy.
For a bit more context see
commit 4d8151ae53
Author: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Date: Tue Jun 1 09:46:41 2021 +0200
drm/i915: Don't free shared locks while shared
- the fpriv->vm_xa was relying on rcu_read_lock for lookup, but that
was updated in a prep patch too to just be a spinlock-protected
lookup.
- intel_gt->vm is set at driver load in intel_gt_init() and released
in intel_gt_driver_release(). There seems to be some issue that
in some error paths this is called twice, but otherwise no rcu to be
found anywhere. This was added in the below commit, which
unfortunately doesn't explain why this complication exists.
commit e6ba764802
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sat Dec 21 16:03:24 2019 +0000
drm/i915: Remove i915->kernel_context
The proper fix most likely for this is to start using drmm_ at large
scale, but that's also huge amounts of work.
- i915_vma->vm is some real pain, because rcu is rcu protected, at
least in the vma lookup in the context lookup cache in
eb_lookup_vma(). This was added in
commit 4ff4b44cbb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jun 16 15:05:16 2017 +0100
drm/i915: Store a direct lookup from object handle to vma
This was changed to a radix tree from the hashtable in, but with the
locking unchanged, in
commit d1b48c1e71
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Aug 16 09:52:08 2017 +0100
drm/i915: Replace execbuf vma ht with an idr
In
commit 93159e1235
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Mar 23 09:28:41 2020 +0000
drm/i915/gem: Avoid gem_context->mutex for simple vma lookup
the locking was changed from dev->struct_mutex to rcu, which added
the requirement to rcu protect i915_vma. Somehow this was missed in
review (or I'm completely blind).
Irrespective of all that the vma lookup cache rcu_read_lock grabs a
full reference of the vma and the rcu doesn't leak further. So no
impact on i915_address_space from that.
I have not found any other rcu use for i915_vma, but given that it
seems broken I also didn't bother to do a careful in-depth audit.
Alltogether there's nothing left in-tree anymore which requires that a
pointer deref to an i915_address_space is safe undre rcu_read_lock
only.
rcu protection of i915_address_space was introduced in
commit b32fa81115
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jun 20 19:37:05 2019 +0100
drm/i915/gtt: Defer address space cleanup to an RCU worker
by mixing up a bugfixing (i915_address_space needs to be released from
a worker) with enabling rcu support. The commit message also seems
somewhat confused, because it talks about cleanup of WC pages
requiring sleep, while the code and linked bugzilla are about a
requirement to take dev->struct_mutex (which yes sleeps but it's a
much more specific problem). Since final kref_put can be called from
pretty much anywhere (including hardirq context through the
scheduler's i915_active cleanup) we need a worker here. Hence that
part must be kept.
Ideally all these reclaim workers should have some kind of integration
with our shrinkers, but for some of these it's rather tricky. Anyway,
that's a preexisting condition in the codeebase that we wont fix in
this patch here.
We also remove the rcu_barrier in ggtt_cleanup_hw added in
commit 60a4233a49
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Jul 29 14:24:12 2019 +0100
drm/i915: Flush the i915_vm_release before ggtt shutdown
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-11-daniel.vetter@ffwll.ch
We don't need the absolute speed of rcu for this. And
i915_address_space in general dont need rcu protection anywhere else,
after we've made gem contexts and engines a lot more immutable.
Note that this semantically reverts
commit aabbe344dc
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Aug 30 19:03:25 2019 +0100
drm/i915: Use RCU for unlocked vm_idr lookup
except we have the conversion from idr to xarray in between.
v2: kref_get_unless_zero is no longer required (Maarten)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-10-daniel.vetter@ffwll.ch
It's been invariant since
commit ccbc1b9794
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:30 2021 -0500
drm/i915/gem: Don't allow changing the VM on running contexts (v4)
this just completes the deed. I've tried to split out prep work for
more careful review as much as possible, this is what's left:
- get_ppgtt gets simplified since we don't need to grab a temporary
reference - we can rely on the temporary reference for the gem_ctx
while we inspect the vm. The new vm_id still needs a full
i915_vm_open ofc. This also removes the final caller of context_get_vm_rcu
- A pile of selftests can now just look at ctx->vm instead of
rcu_dereference_protected( , true) or similar things.
- All callers of i915_gem_context_vm also disappear.
- I've changed the hugepage selftest to set scrub_64K without any
locking, because when we inspect that setting we're also not taking
any locks either. It works because it's a selftests that's careful
(single threaded gives you nice ordering) and not a live driver
where races can happen from anywhere.
These can only be split up further if we have some intermediate state
with a bunch more rcu_dereference_protected(ctx->vm, true), just to
shut up lockdep and sparse.
The conversion to __rcu happened in
commit a4e7ccdac3
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 4 14:40:09 2019 +0100
drm/i915: Move context management under GEM
Note that we're not breaking the actual bugfix in there: The real
bugfix is pushing the i915_vm_relase onto a separate worker, to avoid
locking inversion issues. The rcu conversion was just thrown in for
entertainment value on top (no vm lookup isn't even close to anything
that's a hotpath where removing the single spinlock can be measured).
v2: Rebase over the change to move the i915_vm_put() into
i915_gem_context_release().
v3: Trivial conflict against repainted shed.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-9-daniel.vetter@ffwll.ch
Since
commit ccbc1b9794
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:30 2021 -0500
drm/i915/gem: Don't allow changing the VM on running contexts (v4)
the gem_ctx->vm can't change anymore. Plus we always set the
intel_context->vm, so might as well use the helper we have for that.
This makes it very clear that we always overwrite intel_context->vm
for userspace contexts, since the default is gt->vm, which is
explicitly reserved for kernel context use. It would be good to split
things up a bit further and avoid any possibility for an accident
where we run kernel stuff in userspace vm or the other way round.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-8-daniel.vetter@ffwll.ch
And use it anywhere we have open-coded checks for ctx->vm that really
only check for full ppgtt.
Plus for paranoia add a GEM_BUG_ON that checks it's really only set
when we have full ppgtt, just in case. gem_context->vm is different
since it's NULL in ggtt mode, unlike intel_context->vm or gt->vm,
which is always set.
v2: 0day found a testcase that I missed.
v3: Repaint shed (Jon, Tvrtko)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-7-daniel.vetter@ffwll.ch
Consolidates the "which is the vm my execbuf runs in" code a bit. We
do some get/put which isn't really required, but all the other users
want the refcounting, and I figured doing a function just for this
getparam to avoid 2 atomis is a bit much.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-6-daniel.vetter@ffwll.ch
The important part isn't so much that this does an rcu lookup - that's
more an implementation detail, which will also be removed.
The thing that makes this different from other functions is that it's
gettting you the vm that batchbuffers will run in for that gem
context, which is either a full ppgtt stored in gem->ctx, or the ggtt.
We'll make more use of this function later on.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-5-daniel.vetter@ffwll.ch
Changing the vm from a finalized gem ctx is no longer possible, which
means we don't have to check for that anymore.
I was pondering whether to keep the check as a WARN_ON, but things go
boom real bad real fast if the vm of a vma is wrong. Plus we'd need to
also get the ggtt vm for !full-ppgtt platforms. Ditching it all seemed
like a better idea.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
References: ccbc1b9794 ("drm/i915/gem: Don't allow changing the VM on running contexts (v4)")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-4-daniel.vetter@ffwll.ch
The comment added in
commit b81dde7194
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue May 21 22:11:29 2019 +0100
drm/i915: Allow userspace to clone contexts on creation
and moved in
commit 27dbae8f36
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Nov 6 09:13:12 2019 +0000
drm/i915/gem: Safely acquire the ctx->vm when copying
suggested that i915_address_space were at least intended to be managed
through SLAB_TYPESAFE_BY_RCU:
* This ppgtt may have be reallocated between
* the read and the kref, and reassigned to a third
* context. In order to avoid inadvertent sharing
* of this ppgtt with that third context (and not
* src), we have to confirm that we have the same
* ppgtt after passing through the strong memory
* barrier implied by a successful
* kref_get_unless_zero().
But extensive git history search has not brough any such reuse to
light.
What has come to light though is that ever since
commit 2850748ef8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 4 14:39:58 2019 +0100
drm/i915: Pull i915_vma_pin under the vm->mutex
(yes this commit is earlier) the final i915_vma_put call has been
moved from i915_gem_context_free (now called _release) to
context_close, which means it's not actually safe anymore to access
the ctx->vm pointer without lock helds, because it might disappear at
any moment. Note that superficially things all still work, because the
i915_address_space is RCU protected since
commit b32fa81115
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jun 20 19:37:05 2019 +0100
drm/i915/gtt: Defer address space cleanup to an RCU worker
except the very clever macro above (which is designed to protected
against object reuse due to SLAB_TYPESAFE_BY_RCU or similar tricks)
results in an endless loop if the refcount of the ctx->vm ever
permanently drops to 0. Which it totally now can.
Fix that by moving the final i915_vm_put to where it should be.
Note that i915_gem_context is rcu protected, but _only_ the final
kfree. This means anyone who chases a pointer to a gem ctx solely
under the protection can pretty only call kref_get_unless_zero(). This
seems to be pretty much the case, aside from a bunch of cases that
consult the scheduling information without any further protection.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-3-daniel.vetter@ffwll.ch
gem context refcounting is another exercise in least locking design it
seems, where most things get destroyed upon context closure (which can
race with anything really). Only the actual memory allocation and the
locks survive while holding a reference.
This tripped up Jason when reimplementing the single timeline feature
in
commit 00dae4d3d3
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:12 2021 -0500
drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)
We could fix the bug by holding ctx->mutex in execbuf and clear the
pointer (again while holding the mutex) context_close, but it's
cleaner to just make the context object actually invariant over its
_entire_ lifetime. This way any other ioctl that's potentially racing,
but holding a full reference, can still rely on ctx->syncobj being
an immutable pointer. Which without this change, is not the case.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: 00dae4d3d3 ("drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-2-daniel.vetter@ffwll.ch
The only reason for this really is the i915_gem_engines->fence
callback engines_notify(), which exists purely as a fairly funky
reference counting scheme for that. Otherwise all other callers are
from process context, and generally fairly benign locking context.
Unfortunately untangling that requires some major surgery, and we have
a few i915_gem_context reference counting bugs that need fixing, and
they blow in the current hardirq calling context, so we need a
stop-gap measure.
Put a FIXME comment in when this should be removable again.
v2: Fix mock_context(), noticed by intel-gfx-ci.
Acked-by: Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-1-daniel.vetter@ffwll.ch
After merging the drm tree, today's linux-next build (x86_64 allmodconfig)
failed like this:
In file included from drivers/gpu/drm/i915/i915_debugfs.c:39:
drivers/gpu/drm/i915/gt/intel_gt_requests.h:9:10: fatal error: stddef.h: No such file or directory
9 | #include <stddef.h>
| ^~~~~~~~~~
Caused by commit
564f963eabd1 ("isystem: delete global -isystem compile option")
from the kbuild tree interacting with commit
b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC")
Fixes: b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820123348.6535a87e@canb.auug.org.au
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"A new feature called restricted DMA pools. It allows SWIOTLB to
utilize per-device (or per-platform) allocated memory pools instead of
using the global one.
The first big user of this is ARM Confidential Computing where the
memory for DMA operations can be set per platform"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits)
swiotlb: use depends on for DMA_RESTRICTED_POOL
of: restricted dma: Don't fail device probe on rmem init failure
of: Move of_dma_set_restricted_buffer() into device.c
powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
s390/pv: fix the forcing of the swiotlb
swiotlb: Free tbl memory in swiotlb_exit()
swiotlb: Emit diagnostic in swiotlb_exit()
swiotlb: Convert io_default_tlb_mem to static allocation
of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS
swiotlb: add overflow checks to swiotlb_bounce
swiotlb: fix implicit debugfs declarations
of: Add plumbing for restricted DMA pool
dt-bindings: of: Add restricted DMA pool
swiotlb: Add restricted DMA pool initialization
swiotlb: Add restricted DMA alloc/free support
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Update is_swiotlb_buffer to add a struct device argument
...
Initialize the L3CC table as part of mocs initialization to program
LNCFCMOCSx registers so that the mocs settings are available for
selection for subsequent memory transactions in the driver load path.
We need to keep L3CC initialization in intel_mocs_init_engine() also
so that in execlists submission, these registers can be rewritten
during engine reset.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Sreedhar Telukuntla <sreedhar.telukuntla@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-6-ayaz.siddiqui@intel.com
Historically we've initialized all undefined/reserved entries in
a platform's MOCS table to the contents of table entry #1 (i.e.,
I915_MOCS_PTE).
Going forward, we can't assume that table entry #1 will always
contain suitable values to use for undefined/reserved table
indices. We'll allow a platform-specific table index to be
selected at table initialization time in these cases.
This new mechanism to select L3 WB entry will be applicable for
all the Gen12+ platforms except TGL and RKL.
Since TGL and RLK are already in production so their mocs settings
are intact to avoid ABI break.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-5-ayaz.siddiqui@intel.com
Blitter commands which do not have MOCS fields rely on
cacheability of BlitterCacheControlRegister which was mapped
to index 0 by default.Once we changed the MOCS value of
index 0 to L3 WB, tests like gem_linear_blits started failing
due to a change in cacheability from UC to WB.
Program and place the BlitterCacheControlRegister in
build_aux_regs().
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-4-ayaz.siddiqui@intel.com
Cache-control registers for Command Stream(CMD_CCTL) are used
to set catchability for memory writes and reads outputted by
Command Streamers on Gen12 onward platforms.
These registers need to point un-cached(UC) MOCS index.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-3-ayaz.siddiqui@intel.com
Now there are lots of Command and registers that require mocs index
programming.
So propagating mocs_index from mocs to gt so that it can be
used directly without having platform-specific checks.
V2:
Changed 'i915_mocs_index_gt' to anonymous structure.
Cc: CQ Tang<cq.tang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-2-ayaz.siddiqui@intel.com
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs core
code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation
-----BEGIN PGP SIGNATURE-----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=ZwOe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching
to support future vendor provided vfio-pci variants (Yishai Hadas,
Max Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first
open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy,
Yishai Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=nzK7
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
Seems like newer cards can have even more instances now.
Found by UBSAN: array-index-out-of-bounds in
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29
index 8 is out of range for type 'uint32_t *[8]'
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697
Cc: stable@vger.kernel.org
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using the I915_MMAP_TYPE_FIXED mmap type requires the TTM backend, so
for that mmap type, use __i915_gem_object_create_user() instead of
i915_gem_object_create_internal(), as we really want to tests objects
mmap-able by user-space.
This also means that the out-of-space error happens at object creation
and returns -ENXIO rather than -ENOSPC, so fix the code up to expect
that on out-of-offset-space errors.
Finally only use I915_MMAP_TYPE_FIXED for LMEM and SMEM for now if
testing on LMEM-capable devices. For stolen LMEM, we still take the
same path as for integrated, as that haven't been moved over to TTM yet,
and user-space should not be able to create out of stolen LMEM anyway.
v2:
- Check the presence of the obj->ops->mmap_offset callback rather than
hardcoding the supported mmap regions in can_mmap() (Maarten Lankhorst)
Fixes: 7961c5b60f ("drm/i915: Add TTM offset argument to mmap.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831122931.157536-1-thomas.hellstrom@linux.intel.com
Added HBR3 support for ADL_P and ADL_S platform.
Bspec: 53597, 53720, 49185, 55409
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901160402.24816-6-animesh.manna@intel.com
Combo phy is limited to 5.4 GHz on low-voltage SKUs, but both eDP and DP
can do 8.1 GHz on combo phy.
Bspec: 49182, 49205, 49202
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901160402.24816-5-animesh.manna@intel.com
Only higher voltage sku can support HBR3 so a condition
check added in max source rate calculation for ehl/jsl.
Bspec: 32247, 20598
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901160402.24816-4-animesh.manna@intel.com
Combo phy is limited to 5.4 GHz on low-voltage SKUs. Combo phy DP is
limited to 5.4 GHz, while combo phy eDP can do 8.1 GHz.
Bspec: 20584, 20598, 49180, 49201
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901160402.24816-3-animesh.manna@intel.com
intel_dp_set_source_rates() calls intel_dp_is_edp(), which is unsafe to
use before intel_encoder->type is set. This causes incorrect max source
rate to be used for display 11+. On EHL and JSL, HBR3 is used instead of
HBR2, and on the other affected platforms, HBR2 is used instead of HBR3.
Move intel_dp_set_source_rates() to after intel_encoder->type is
set. Add comment to intel_dp_is_edp() describing unsafe usages. Cleanup
intel_dp_init_connector() while at it.
Note: The same change was originally added as commit 680c45c767
("drm/i915/dp: Correctly advertise HBR3 for GEN11+"), but later reverted
due to issues in CI in commit d391301960 ("Revert "drm/i915/dp:
Correctly advertise HBR3 for GEN11+"").
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901160402.24816-2-animesh.manna@intel.com
Only the DRM GPU scheduler, radeon and amdgpu where using them and they depend
on a non existing config option to actually emit some code.
v2: keep the signal path as is for now
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818105443.1578-1-christian.koenig@amd.com
Accidentally dropped the else in a rebase fail, causing the DG2 max rate
to be overwritten later in the if ladder.
Fixes: e752d1f9c1 ("drm/i915/dg2: add DG2 UHBR source rates")
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901112815.16498-1-jani.nikula@intel.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831075327.653-1-caihuoqing@baidu.com
Pointer sink is being inintialized with a value that is never read,
it is later being re-assigned a new value. Remove the redundant
initialization.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Schedule the encode job in VCE/VCN encode ring
based on the priority set by UMD.
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN has multiple rings. Set the proper priority level for each
encode ring while initializing.
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCE has multiple rings. Set the proper priority level for each
ring while initializing.
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add MPIO to RAS block
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create common PSP TA unload function and replace all common TA unloading
sequences.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new debugfs interface uses an IOCTL interface in order to pass
along state information like SRBM and GRBM bank switching. This
new interface also allows a full 32-bit MMIO address range which
the previous didn't. With this new design we have room to grow
the flexibility of the file as need be.
(v2): Move read/write to .read/.write, fix style, add comment
for IOCTL data structure
(v3): C style comments
(v4): use u32 in struct and remove offset variable
(v5): Drop flag clearing in op function, use 0xFFFFFFFF for broadcast
instead of 0x3FF, use mutex for op/ioctl.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a DC_LOG_WARNING message. Fix it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently AMDGPU_RING_PRIO_MAX is redefinition of a
max gfx hwip priority, this won't work well when we will
have a hwip with different set of priorities than gfx.
Also, HW ring priorities are different from ring priorities.
Create a global enum for ring priority levels which each
HWIP can use to define its own priority levels.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To get a hardware queue priority for a context, we are currently
mapping AMDGPU_CTX_PRIORITY_* to DRM_SCHED_PRIORITY_* and then
to hardware queue priority, which is not the right way to do that
as DRM_SCHED_PRIORITY_* is software scheduler's priority and it is
independent from a hardware queue priority.
Use userspace provided context priority, AMDGPU_CTX_PRIORITY_* to
map a context to proper hardware queue priority.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- FW promotion 0.0.80
- Add missing ABM register offsets
- Fix in swizzle mode mapping
- Emulated sink support for freesync
- Improvoments in max target bpp
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add volatile to avoid incomplete flushing of data in rb
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Swizzle mode enum for DC_SW_VAR_R_X was existing,
but not mapped correctly.
[How]
Update mapping and conversion for DC_SW_VAR_R_X.
Reviewed-by: XiangBing Foo <XiangBing.Foo@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When forced modes are used during certain IGT tests,
without a real connector, dc_sink would be null when
standard modes are added by the driver. Calling the
function to update freesync capabilities at this
point will result in an error being printed
[How]
Use emulated sink when available. If both the normal
and emulated sink are not available, set all freesync
parameters to 0.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors exhibit corruption at 16bpp DSC.
[How]
- Add helpers for patching edid caps.
- Use it for limiting DSC target bitrate to 15bpp for known monitors
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Max target bpp override is an option for working around
DSC issues. It is supported on DC level, but was not
used in DM.
[How]
Use actual option value instead of 0.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Clocks don't get recalculated in 0 stream/0 pipe configs,
blocking S0i3 if dcfclk gets high enough
[HOW]
Create DCN31 copy of DCN30 bandwidth validation func which
doesn't entirely skip validation in 0 pipe scenarios
Override dcfclk to vlevel 0/min value during validation if pipe
count is 0
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To add support for HPD interrupt handling from DMUB.
HPD interrupt could be triggered from outbox1 from DMUB
[HOW]
1) Use queue_work to handle hpd task from outbox1
2) Add handle_hpd_irq_helper to share interrupt handling code
between legacy and DMUB HPD from outbox1
3) Added DMUB HPD handling in dmub_srv_stat_get_notification().
HPD handling callback function and wake up the DMUB thread.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some ABM registers don't exist on DCN 3.01, so are
missing from its register offset list. However,
this list was copied to later versions of DCN that
do have these registers. As a result, they're
inaccessible from the driver on those DCN versions
even though they exist.
[How]
Add the missing ABM register offsets to DCN 3.02+
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Retrieve 128/132b link cap.
2. 128/132b link training and payload allocation.
3. UHBR10 link rate support.
[squash in warning fixes - Alex]
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During svm restore pages interrupt handler, kfd_process ref count was
never dropped when xnack was disabled. Therefore, the object was never
released.
Fixes: 2383f56bbe ("drm/amdkfd: page table restore through svm API")
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t
-----BEGIN PGP SIGNATURE-----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=vZkA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
Used by drivers supporting hot unplug to handle all
DMA IOMMU group related dependencies before the group
is removed during device removal and we try to access
it after free when last device pointer from user space
is dropped.
v3:
Switch to ttm_bo_get_unless_zerom
Iterate bdev for pinned list
Switch to ttm_tt_unpopulate
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827203910.5565-3-andrey.grodzovsky@amd.com
Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual
recommendation of having arguments enclosed in parenthesis. While that
didn't change anything for quite sometime, it actually become important
after CSC code rework with commit ea067aee45 ("drm/sun4i: de2/de3:
Remove redundant CSC matrices").
Without this fix, colours are completely off for supported YVU formats
on SoCs with DE2 (A64, H3, R40, etc.).
Fix the issue by enclosing macro arguments in parenthesis.
Cc: stable@vger.kernel.org # 5.12+
Fixes: 8830293905 ("drm/sun4i: Add DE2 CSC library")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135740.4826-1-caihuoqing@baidu.com
Enable MIPI DSI support on ADL-P platform.
The esc clock changes, WA changes are taken care
in the previous patches.
As per the Bspec the seq remains to be same as TGL.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826054811.10572-3-vandita.kulkarni@intel.com
Wa_16012360555 SW will have to program the "LP to HS Wakeup Guardband"
field to account for the repeaters on the HS Request/Ready PPI signaling
between the Display engine and the DPHY.
v2: Fix build issue.
v3: Align to new naming (Jani)
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826054811.10572-2-vandita.kulkarni@intel.com
The function is only used from within GEM_BUG_ON(), which is causing
warnings with Wunneeded-internal-declaration in some builds. Since the
function is a simple wrapper around a CT function, we can just call the
CT function directly instead.
Fixes: 1fb12c5871 ("drm/i915/guc: skip disabling CTBs before sanitizing the GuC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210823163137.19770-1-daniele.ceraolospurio@intel.com
Get process vm root BO ref in case process is exiting and root BO is
freed, to avoid NULL pointer dereference backtrace:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
Call Trace:
amdgpu_show_fdinfo+0xfe/0x2a0 [amdgpu]
seq_show+0x12c/0x180
seq_read+0x153/0x410
vfs_read+0x91/0x140[ 3427.206183] ksys_read+0x4f/0xb0
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fall through to handle the error instead of return.
Fixes: f8aab60422 ("drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs")
Cc: stable@vger.kernel.org
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This gurantees no more work on the ring can be submitted
to hardware in suspend/resume case, otherwise a potential
race will occur and the ring will get no chance to stay
empty before suspend.
v2: Call drm_sched_resubmit_job before drm_sched_start to
restart jobs from the pending list.
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[WHY]
lt_settings' pointers remain uninitialized but nonzero if display fails
to light up with no DPCD/EDID info populated, leading to a hang on access
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The change has caused high idle memory clock speed and power
consumption at some resolutions and frame rates for Navi10
[HOW]
Reverted change "drm/amd/display: Fixed Intermittent blue
screen on OLED panel"
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Free memory allocated if any of the previous allocations failed.
>>> CID 1487129: Resource leaks (RESOURCE_LEAK)
>>> Variable "vpg" going out of scope leaks the storage it points to.
Addresses-Coverity-ID: 1487129: ("Resource leaks")
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135048.4305-1-caihuoqing@baidu.com
If run before the next bridge is initialized, of_drm_find_bridge() will
give us a NULL pointer.
If that's the case, return -EPROBE_DEFER; we may have more luck next
time.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 988156dc2f ("drm: bridge: add it66121 driver")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-2-paul@crapouillou.net
These two arrays are populated with data read from the I2C device
through regmap_read(), and the data is then compared with hardcoded
vendor/product ID values of supported chips.
However, the return value of regmap_read() was never checked. This is
fine, as long as the two arrays are zero-initialized, so that we don't
compare the vendor/product IDs against whatever garbage is left on the
stack.
Address this issue by zero-initializing these two arrays.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 988156dc2f ("drm: bridge: add it66121 driver")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827163956.27517-1-paul@crapouillou.net
Enable DSI EOTP feature for fixing some panel screen constant shift issue.
Removing MIPI flag MIPI_DSI_MODE_NO_EOT_PACKET to enable DSI EOTP.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819060110.3427256-1-xji@analogixsemi.com
The code was making a copy of a struct ttm_resource. However,
recently the struct ttm_resources were allowed to be subclassed and
also were allowed to be malloced, hence the driver could end up assuming
the copy we handed it was subclassed and worse, the original could have
been freed at this point.
Fix this by using the original struct ttm_resource before it is
potentially freed in ttm_bo_move_sync_cleanup()
v2: Base on drm-misc-next-fixes rather than drm-tip.
Reported-by: Ben Skeggs <skeggsb@gmail.com>
Reported-by: Dave Airlie <airlied@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Fixes: 3bf3710e37 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831071536.80636-1-thomas.hellstrom@linux.intel.com
Core changes:
- The usual set of small fixes and improvements all over the place, but nothing
outstanding
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts
of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=qyll
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
This list will be used to capture all non VRAM BOs not
on LRU so when device is hot unplugged we can iterate
the list and unmap DMA mappings before device is removed.
v2: Reanme function to ttm_bo_move_to_pinned
v3: Move the pinned list to ttm device
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/451614/?series=93971
We had a mix of intel_edp_drrs_*(), intel_dp_drrs_*() and
intel_dp_set_drrs_state(), so properly renaming all functions to
keep the same pattern.
While at it, also dropping intel_dp_set_drrs_state from the
documentation as it is a static function.
v3:
- dropping documentation style comment in static function
(intel_drrs_set_state)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827174253.51122-3-jose.souza@intel.com
intel_dp.c is a 5k lines monster, so moving DRRS out of it to reduce
some lines from it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827174253.51122-2-jose.souza@intel.com
At this point is sure that HSW and BDW will never have PSR enabled by
default, so here dropping it from device info and cleaning up code.
v2:
- enable psr support for display 9
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827174253.51122-1-jose.souza@intel.com
There are three identical spelling mistakes in dev_err messages.
Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to high latency in PCIE clock switching on RKL platforms,
switching the PCIE clock dynamically at runtime can lead to HDMI/DP
audio problems. On newer asics this is handled in the SMU firmware.
For SMU7-based asics, disable PCIE clock switching to avoid the issue.
AMD provide a parameter to disable PICE_DPM.
modprobe amdgpu ppfeaturemask=0xfff7bffb
It's better to contorl PCIE_DPM in amd gpu driver,
switch PCI_DPM by determining intel RKL platform for SMU7-based asics.
Fixes: 1a31474cdb ("drm/amd/pm: workaround for audio noise issue")
Ref: https://lists.freedesktop.org/archives/amd-gfx/2021-August/067413.html
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To cover the corner case that people want to know the ID
of an UNKNOWN CMD.
Suggested-by: John Clements <john.clements@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Scatter/gather is APU feature starting from carrizo.
adev->apu_flags is not used for all APUs.
adev->flags & AMD_IS_APU can be used for all APUs.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Missing code for Yellow Carp to enable scatter gather - follows how
DCN21 support was added.
Tested that 8k framebuffer allocation and display can now succeed after
applying the patch.
v2: Add hookup in DM
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
The "Board Parameters" members of the structs:
struct atom_smc_dpm_info_v4_5
struct atom_smc_dpm_info_v4_6
struct atom_smc_dpm_info_v4_7
struct atom_smc_dpm_info_v4_10
are written to the corresponding members of the corresponding PPTable_t
variables, but they lack destination size bounds checking, which means
the compiler cannot verify at compile time that this is an intended and
safe memcpy().
Since the header files are effectively immutable[1] and a struct_group()
cannot be used, nor a common struct referenced by both sides of the
memcpy() arguments, add a new helper, amdgpu_memcpy_trailing(), to
perform the bounds checking at compile time. Replace the open-coded
memcpy()s with amdgpu_memcpy_trailing() which includes enough context
for the bounds checking.
"objdump -d" shows no object code changes.
[1] https://lore.kernel.org/lkml/e56aad3c-a06f-da07-f491-a894a570d78f@amd.com
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Feifei Xu <Feifei.Xu@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Jiawei Gu <Jiawei.Gu@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts the commit below:
"drm/amdgpu: disable BACO support for 699F:C7 polaris12 SKU temporarily".
As the S3 hang issue has been fixed by another commit:
"drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Send response to host after received the flr notification from host.
Port NV change to vega10.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The parameters were renamed.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can now process any RAS EEPROM address from
VBIOS. Generalize so as to compute the top three
bits of the 19-bit EEPROM address, from any byte
returned as the "i2c address" from VBIOS.
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) Generalize the function--if the user didn't set
i2c_address, still return true/false to
indicate whether VBIOS contains the RAS EEPROM
address. This function shouldn't evaluate
whether the user set the i2c_address pointer or
not.
2) Don't touch the caller's i2c_address, unless
you have to--this function shouldn't have side
effects.
3) Correctly set the function comment as a
kernel-doc comment.
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:112:9-10:WARNING:
return of 0/1 in function 'dcn31_is_panel_backlight_on'
with return type bool
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:122:9-10:WARNING:
return of 0/1 in function 'dcn31_is_panel_powered_on'
with return type bool
Return statements in functions returning bool should use true/false
instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UHBR modes has higher link rate and added new values for programming
mpll of SNPS phy. No change in sequence, only the pll parameters
are different for UHBR modes.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827103843.527-1-jani.nikula@intel.com
Apparently the last reader of i915->active_pipes was removed with commit
ef79d62b5c ("drm/i915: Encapsulate dbuf state handling harder"), and
now it's only ever written to. Remove it completely.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826141830.889-1-jani.nikula@intel.com
There's only one exclusive slot, and we must not break the ordering.
Adding a new exclusive fence drops all previous fences from the
dma_resv. To avoid violating the signalling order we err on the side of
over-synchronizing by waiting for the existing fences, even if
userspace asked us to ignore them.
A better fix would be to us a dma_fence_chain or _array like e.g.
amdgpu now uses, but
- msm has a synchronous dma_fence_wait for anything from another
context, so doesn't seem to care much,
- and it probably makes sense to lift this into dma-resv.c code as a
proper concept, so that drivers don't have to hack up their own
solution each on their own.
v2: Improve commit message per Lucas' suggestion.
Cc: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-17-daniel.vetter@ffwll.ch
With the prep work out of the way this isn't tricky anymore.
Aside: The chaining of the various jobs is a bit awkward, with the
possibility of failure in bad places. I think with the
drm_sched_job_init/arm split and maybe preloading the
job->dependencies xarray this should be fixable.
v2: Rebase over renamed function names for adding dependencies.
Reviewed-by: Melissa Wen <mwen@igalia.com> (v1)
Acked-by: Emma Anholt <emma@anholt.net>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-11-daniel.vetter@ffwll.ch
Prep work for using the scheduler dependency handling. We need to call
drm_sched_job_init earlier so we can use the new drm_sched_job_await*
functions for dependency handling here.
v2: Slightly better commit message and rebase to include the
drm_sched_job_arm() call (Emma).
v3: Cleanup jobs under construction correctly (Emma)
v4: Rebase over perfmon patch
Reviewed-by: Melissa Wen <mwen@igalia.com> (v3)
Acked-by: Emma Anholt <emma@anholt.net>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-10-daniel.vetter@ffwll.ch
Nothing special going on here.
Aside reviewing the code, it seems like drm_sched_job_arm() should be
moved into lima_sched_context_queue_task and put under some mutex
together with drm_sched_push_job(). See the kerneldoc for
drm_sched_push_job().
v2: Rebase over renamed functions to add dependencies.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-9-daniel.vetter@ffwll.ch
Just deletes some code that's now more shared.
Note that thanks to the split into drm_sched_job_init/arm we can now
easily pull the _init() part from under the submission lock way ahead
where we're adding the sync file in-fences as dependencies.
v2: Correctly clean up the partially set up job, now that job_init()
and job_arm() are apart (Emma).
v3: Rebased over renamed functions for adding depdencies
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Steven Price <steven.price@arm.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-8-daniel.vetter@ffwll.ch
I found a few too many things that are tricky and not documented, so I
started typing.
I found a few more things that looked broken while typing, see the
varios FIXME in drm_sched_entity.
Also some of the usual logics:
- actually include sched_entity.c declarations, that was lost in the
move here: 620e762f9a ("drm/scheduler: move entity handling into
separate file")
- Ditch the kerneldoc for internal functions, keep the comments where
they're describing more than what the function name already implies.
- Switch drm_sched_entity to inline docs.
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-7-daniel.vetter@ffwll.ch
Originally a job was only bound to the queue when we pushed this, but
now that's done in drm_sched_job_init, making that parameter entirely
redundant.
Remove it.
The same applies to the context parameter in
lima_sched_context_queue_task, simplify that too.
v2:
Rebase on top of msm adopting drm/sched
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com> (v1)
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chen Li <chenli@uniontech.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Deepak R Varma <mh12gx2825@gmail.com>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Dennis Li <Dennis.Li@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Melissa Wen <mwen@igalia.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-6-daniel.vetter@ffwll.ch
Instead of just a callback we can just glue in the gem helpers that
panfrost, v3d and lima currently use. There's really not that many
ways to skin this cat.
v2/3: Rebased.
v4: Repaint this shed. The functions are now called _add_dependency()
and _add_implicit_dependency()
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v3)
Reviewed-by: Steven Price <steven.price@arm.com> (v1)
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Nirmoy Das <nirmoy.aiemd@gmail.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-5-daniel.vetter@ffwll.ch
It might be good enough on x86 with just READ_ONCE, but the write side
should then at least be WRITE_ONCE because x86 has total store order.
It's definitely not enough on arm.
Fix this proplery, which means
- explain the need for the barrier in both places
- point at the other side in each comment
Also pull out the !sched_list case as the first check, so that the
code flow is clearer.
While at it sprinkle some comments around because it was very
non-obvious to me what's actually going on here and why.
Note that we really need full barriers here, at first I thought
store-release and load-acquire on ->last_scheduled would be enough,
but we actually requiring ordering between that and the queue state.
v2: Put smp_rmp() in the right place and fix up comment (Andrey)
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-4-daniel.vetter@ffwll.ch
Originally drm_sched_job_init was the point of no return, after which
drivers really should submit a job. I've split that up, which allows
us to fix this issue pretty easily.
Only thing we have to take care of is to not skip to error paths after
that. Other drivers do this the same for out-fence and similar things.
v2: It's not really a bugfix, just an improvement, since all
drm_sched_job_arm does is reserve the fence number. And gaps should be
fine, as long as the drm_sched_job doesn't escape anywhere at all.
For robustness it's still better to align with other drivers here and
not bail out after job_arm().
v3: I misplaced drm_sched_job_arm by _one_ line! Thanks to Rob for
testing and debug help.
Cc: Rob Clark <robdclark@chromium.org>
Cc: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826093334.1117944-1-daniel.vetter@ffwll.ch
This is a very confusingly named function, because not just does it
init an object, it arms it and provides a point of no return for
pushing a job into the scheduler. It would be nice if that's a bit
clearer in the interface.
But the real reason is that I want to push the dependency tracking
helpers into the scheduler code, and that means drm_sched_job_init
must be called a lot earlier, without arming the job.
v2:
- don't change .gitignore (Steven)
- don't forget v3d (Emma)
v3: Emma noticed that I leak the memory allocated in
drm_sched_job_init if we bail out before the point of no return in
subsequent driver patches. To be able to fix this change
drm_sched_job_cleanup() so it can handle being called both before and
after drm_sched_job_arm().
Also improve the kerneldoc for this.
v4:
- Fix the drm_sched_job_cleanup logic, I inverted the booleans, as
usual (Melissa)
- Christian pointed out that drm_sched_entity_select_rq() also needs
to be moved into drm_sched_job_arm, which made me realize that the
job->id definitely needs to be moved too.
Shuffle things to fit between job_init and job_arm.
v5:
Reshuffle the split between init/arm once more, amdgpu abuses
drm_sched.ready to signal gpu reset failures. Also document this
somewhat. (Christian)
v6:
Rebase on top of the msm drm/sched support. Note that the
drm_sched_job_init() call is completely misplaced, and hence also the
split-out drm_sched_entity_push_job(). I've put in a FIXME which the next
patch will address.
v7: Drop the FIXME in msm, after discussions with Rob I agree it shouldn't
be a problem where it is now.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Steven Price <steven.price@arm.com> (v2)
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (v5)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: Deepak R Varma <mh12gx2825@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: Chen Li <chenli@uniontech.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Dennis Li <Dennis.Li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Emma Anholt <emma@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210817084917.3555822-1-daniel.vetter@ffwll.ch
drm/i915 fixes for v5.15-rc1:
- Disable underrun recovery with eDP MSO panels on ADL-P
- Use designated initializers for init/exit table
- Fix some error pointer usages
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r1egd1cg.fsf@intel.com
API updates:
- Treewide conversion to generic_handle_domain_irq() for anything
that looks like a chained interrupt controller
- Update the irqdomain documentation
- Use of bitmap_zalloc() throughout the tree
New functionalities:
- Support for GICv3 EPPI partitions
Fixes:
- Qualcomm PDC hierarchy fixes
- Yet another priority decoding fix for the GICv3 pseudo-NMIs
- Fix the apple-aic driver irq_eoi() callback to always unmask
the interrupt
- Properly handle edge interrupts on loongson-pch-pic
- Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE
-----BEGIN PGP SIGNATURE-----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=bdm2
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- API updates:
- Treewide conversion to generic_handle_domain_irq() for anything
that looks like a chained interrupt controller
- Update the irqdomain documentation
- Use of bitmap_zalloc() throughout the tree
- New functionalities:
- Support for GICv3 EPPI partitions
- Fixes:
- Qualcomm PDC hierarchy fixes
- Yet another priority decoding fix for the GICv3 pseudo-NMIs
- Fix the apple-aic driver irq_eoi() callback to always unmask
the interrupt
- Properly handle edge interrupts on loongson-pch-pic
- Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE
Link: https://lore.kernel.org/r/20210828121013.2647964-1-maz@kernel.org
In commit 8e02cceb1f ("drm/i915: delete gpu reloc code") I deleted
the gpu relocation code and the selftest include and enabling, but
accidentally forgot about the selftest source code.
Fix this oversight.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820154932.296628-1-daniel.vetter@ffwll.ch
Switch back to using a spinlock again by moving the IOMMU unmap outside
of the locked region.
This avoids contention especially while freeing pages.
v2: Add a comment explaining why we need sync_shrinkers().
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820120528.81114-3-christian.koenig@amd.com
A recent restructuring of our context workaround list initialization
added an early return for non-render engines; this caused us to
potentially miss the wa_init_finish() call at the end of the function.
The mistake is pretty harmless --- the only impact is that non-render
engines on graphics version 12.50+ platforms we don't trim down the
workaround list to reclaim some memory, and we don't print the usual
"Initialized 1 context workaround" message in dmesg. Let's change the
early return to a jump down to the wa_init_finish() call at the bottom
of the function.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Fixes: 9e9dfd0802 ("drm/i915/dg2: Maintain backward-compatible nested batch behavior")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826033559.1209020-1-matthew.d.roper@intel.com
Fix an accidental partial revert of commit 94dfec48fc ("drm/imx: Add 8
pixel alignment fix") and plane offset calculations for capture of
non-aligned resolutions.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYR0BNhcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwJU1AP9gtT4FQnIwfMBHzCEkMfLmC50K
Kj0Piu6STOikM8/NdgD8DbL/WJnY3CBE/vyuKmYYn5cvf50tES7UbysIjEFa+wA=
=i/1n
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2021-08-18' of git://git.pengutronix.de/pza/linux into drm-fixes
drm/imx: imx-drm alignment and plane offset fixes
Fix an accidental partial revert of commit 94dfec48fc ("drm/imx: Add 8
pixel alignment fix") and plane offset calculations for capture of
non-aligned resolutions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/85a41af99beb2c9e7d6020435a135bf9f205a5ff.camel@pengutronix.de
Reorg the macros as follows:
(1) Group the registers on the same page together.
(2) Group the register and its bit operation together while indenting
the macros of the bit operation with one space.
Also fix a misnomer for the number of mipi data lanes.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824181140.v2.1.I8ead7431357409f2526e5739ec5bc3ddfd242243@changeid
[Why]
This is a global parameter, not a per pipe parameter and it's useful
for experimenting with the prefetch schedule to be adjustable from
the SOC bb.
[How]
Add a parameter to the SOC bb, default is the existing policy for
all DCN. Fill it in when filling SOC bb parameters.
Revert the policy to use MinDCFClk at the same time since that's not
going to give us P-State in most cases on the spreadsheet.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DML is initialized again unnecessarily after its done conditionally.
Remove the duplicate initialization
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The DCN3 SoC parameter num_states was calculated but not saved into the
object.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Cc: stable@vger.kernel.org
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable GFX CGCG and CGLS to workaround
a hardware issue found in aldebaran.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update XGMI RAS to support error query on aldebaran
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On systems with multiple SH per SE compute_static_thread_mgmt_se#
is split into independent masks, one for each SH, in the upper and
lower 16 bits. We need to detect this and apply cu masking to each
SH. The cu mask bits are assigned first to each SE, then to
alternate SHs, then finally to higher CU id. This ensures that
the maximum number of SPIs are engaged as early as possible while
balancing CU assignment to each SH.
v2: Use max SH/SE rather than max SH in cu_per_sh.
v3: Fix comment blocks, ensure se_mask is initially zero filled,
and correctly assign se.sh.cu positions to unset bits in cu_mask.
Signed-off-by: Sean Keely <Sean.Keely@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_dp_dpcd_read/write already has debug error message.
Drop redundant error messages which gives false
status even if correct value is read in drm_dp_dpcd_read().
v2: -Added fixes tag (Ankit)
v3: -Fixed build error (CI)
Fixes: 9488a030ac ("drm/i915: Add support for enabling link status and recovery")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131107.5531-1-swati2.sharma@intel.com
(cherry picked from commit b6dfa41617)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit 55b68fb856 ("drm/omap: squash omapdrm sub-modules into one")
removes the config OMAP2_DSS in ./drivers/gpu/drm/omapdrm/dss/Kconfig,
while moving the other configs into./drivers/gpu/drm/omapdrm/Kconfig, but
misses to remove an obsolete selection of OMAP2_DSS in config DRM_OMAP.
Hence, ./scripts/checkkconfigsymbols.py warns:
OMAP2_DSS
Referencing files: drivers/gpu/drm/omapdrm/Kconfig
Remove this reference in an obsolete selection.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-6-lukas.bulwahn@gmail.com
Commit 89d4f98ae9 ("ARM: remove zte zx platform") removes the config
ARCH_ZX. So, since then, the DRM Support for ZTE SoCs (config DRM_ZTE)
depends on this removed config ARCH_ZX and cannot be selected.
Fortunately, ./scripts/checkkconfigsymbols.py detects this and warns:
ARCH_ZX
Referencing files: drivers/gpu/drm/zte/Kconfig
So, remove this obsolete DRM support.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-5-lukas.bulwahn@gmail.com
Commit 57692c94dc ("drm/v3d: Introduce a new DRM driver for Broadcom V3D
V3.x+") adds the config DRM_V3D, which depends on "ARCH_BCMSTB".
Although, a bit confusing: all Broadcom architectures in
./arch/arm/mach-bcm/Kconfig have the prefix "ARCH_BCM", except for
ARCH_BRCMSTB, i.e., the config for Broadcom BCM7XXX based boards.
So, correct the reference ARCH_BCMSTB to the intended ARCH_BRCMSTB.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-4-lukas.bulwahn@gmail.com
commit 1f0f015151 ("drm/rockchip: Add support for Rockchip Soc RGB
output interface") accidently adds to select the non-existing config
DRM_RGB in ./drivers/gpu/drm/rockchip/Kconfig.
Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:
DRM_RGB
Referencing files: drivers/gpu/drm/rockchip/Kconfig
So, remove the reference to the non-existing config DRM_RGB.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-2-lukas.bulwahn@gmail.com
Use upper_32_bits/lower_32_bits helpers instead of open-coding them.
This is easier to scan quickly compared to bitwise manipulation, and it
is pleasingly symmetric. I noticed this when debugging lock_region,
which had a particularly "creative" way of writing upper_32_bits.
v2: Use helpers for one more call site and add review tag (Steven).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org> (v1)
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210825153348.4980-1-alyssa.rosenzweig@collabora.com
Follow the usual naming conventions. While at it, fix i915_pci.h SPDX
license comment format and add header include guards.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210825150623.28980-1-jani.nikula@intel.com
- Fix missing unlock issue in exynos_drm_g2d.c
- Fix a build warning in exynos_drm_dma.c
One cleanup
- Replace atomic_t with refcount_t in exynos_drm_g2d.c
-----BEGIN PGP SIGNATURE-----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=Mpcq
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two fixups
- Fix missing unlock issue in exynos_drm_g2d.c
- Fix a build warning in exynos_drm_dma.c
One cleanup
- Replace atomic_t with refcount_t in exynos_drm_g2d.c
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210821172825.54720-1-inki.dae@samsung.com
The bulk of these changes is a more modern ABI that can be efficiently
used on newer SoCs as well as older ones. The userspace parts for this
are available here:
- libdrm support: https://gitlab.freedesktop.org/tagr/drm/-/commits/drm-tegra-uabi-v8
- VAAPI driver: https://github.com/cyndis/vaapi-tegra-driver
In addition, existing userspace from the grate reverse-engineering
project has been updated to use this new ABI:
- X11 driver: https://github.com/grate-driver/xf86-video-opentegra
- 3D driver: https://github.com/grate-driver/grate
Other than that, there's also support for display memory bandwidth
management for various generations and a bit of cleanup.
-----BEGIN PGP SIGNATURE-----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=kDS1
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.15-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.15-rc1
The bulk of these changes is a more modern ABI that can be efficiently
used on newer SoCs as well as older ones. The userspace parts for this
are available here:
- libdrm support: https://gitlab.freedesktop.org/tagr/drm/-/commits/drm-tegra-uabi-v8
- VAAPI driver: https://github.com/cyndis/vaapi-tegra-driver
In addition, existing userspace from the grate reverse-engineering
project has been updated to use this new ABI:
- X11 driver: https://github.com/grate-driver/xf86-video-opentegra
- 3D driver: https://github.com/grate-driver/grate
Other than that, there's also support for display memory bandwidth
management for various generations and a bit of cleanup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813163616.2822355-1-thierry.reding@gmail.com
amdgpu_bo_get_preferred_pin_domain is used for page tables
creation, which is not involved with page pinning. And it is used in
more cases than display scanout, modify its documentation as well.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As those _sw_fini() APIs follow just after _suspend() APIs.
And the cancel_delayed_work_sync was already called in latter.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a supplement for commit below:
"drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform proper cleanups on UVD/VCE suspend: powergate enablement,
clockgating enablement and dpm disablement. This can fix some hangs
observed on suspending when UVD/VCE still using(e.g. issue
"pm-suspend" when video is still playing).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The memory latency values returned by pcode on DG2 are in units of "2
usec" rather than 1 usec on all other platforms. I.e., we need to
double the value returned by pcode to obtain the true latency value.
The bspec wording here was a bit ambiguous as to whether it wanted us to
multiply or divide the pcode value by two, but we confirmed offline with
the hardware team that we need to double the value the pcode gives us;
this change is intended to support a larger range of potential latency
values.
Bspec: 49326
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820225710.401136-1-matthew.d.roper@intel.com
When locking a region, we currently clamp to a PAGE_SIZE as the minimum
lock region. While this is valid for Midgard, it is invalid for Bifrost,
where the minimum locking size is 8x larger than the 4k page size. Add a
hardware definition for the minimum lock region size (corresponding to
KBASE_LOCK_REGION_MIN_SIZE_LOG2 in kbase) and respect it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-4-alyssa.rosenzweig@collabora.com
Mali virtual addresses are 48-bit. Use a u64 instead of size_t to ensure
we can express the "lock everything" condition as ~0ULL without
overflow. This code was silently broken on any platform where a size_t
is less than 48-bits; in particular, it was broken on 32-bit armv7
platforms which remain in use with panfrost. (Mainly RK3288)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-3-alyssa.rosenzweig@collabora.com
In lock_region, simplify the calculation of the region_width parameter.
This field is the size, but encoded as ceil(log2(size)) - 1.
ceil(log2(size)) may be computed directly as fls(size - 1). However, we
want to use the 64-bit versions as the amount to lock can exceed
32-bits.
This avoids undefined (and completely wrong) behaviour when locking all
memory (size ~0). In this case, the old code would "round up" ~0 to the
nearest page, overflowing to 0. Since fls(0) == 0, this would calculate
a region width of 10 + 0 = 10. But then the code would shift by
(region_width - 11) = -1. As shifting by a negative number is undefined,
UBSAN flags the bug. Of course, even if it were defined the behaviour is
wrong, instead of locking all memory almost none would get locked.
The new form of the calculation corrects this special case and avoids
the undefined behaviour.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-and-tested-by: Chris Morgan <macromorgan@hotmail.com>
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-2-alyssa.rosenzweig@collabora.com
On g4x and pch the DPLL has two P1 dividers (for refresh rate
switching). Program the FPx1 P1 divider consistently to the reduced
clock P1 divider if available, otherwise just program it to the
same value as the FPx0 P1 divider.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715093530.31711-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The buffer object argument to ttm_move_memcpy was only used to
determine whether the destination memory should be cleared only
or whether we should copy data. Replace it with a "clear" bool, and
update the callers.
The intention here is to be able to use ttm_move_memcpy() async under
a dma-fence as a fallback if an accelerated blit fails in a security-
critical path where data might leak if the blit is not properly
performed. For that purpose the bo is an unsuitable argument since
its relevant members might already have changed at call time.
Finally, update the ttm_move_memcpy kerneldoc that seems to have
ended up with a stale version.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210813144331.372957-3-thomas.hellstrom@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210813144331.372957-3-thomas.hellstrom@linux.intel.com
The current gen2 DPLL readout code:
* assumes i845/i865 have LVDS which is not true
* assumes only pipe B can drive LVDS (true, but makes
the code appear a bit magical)
* hard to parse in general
Clean it up by checking for i85x (the only gen2 platform
with LVDS) and reusing intel_lvds_port_enabled().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715093530.31711-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When we enable the DPLL for the PPS kick, let's tell the DPLL code
we're dealing with an eDP output. This shouldn't really matter, but
it's more consistent with the way the DPLL is configured when we're
actually enabling the eDP port for real.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715093530.31711-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
New LRI register offsets were introduced for DG2, this patch adds
those extra registers, and create new register table for setting offsets
to compare with HW generated context image - especially for gt_lrc test.
Also updates general purpose register with scratch offset for DG2, in
order to use it for live_lrc_fixed selftest.
Cc: Chris P Wilson <chris.p.wilson@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-8-matthew.d.roper@intel.com
Like in the case of several other selftests, generating lots of requests
in a loop takes a bit longer with GuC submission. Increase a timeout in
i915_gem_contexts selftest to take this into account.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727031703.40395-2-matthew.brost@intel.com
We don't care about __iomem mismatch when dealing with error
pointers. Silence it with ERR_CAST().
drivers/gpu/drm/i915/display/intel_dpt.c:136:21: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/display/intel_dpt.c:136:21: expected struct i915_vma *[assigned] vma
drivers/gpu/drm/i915/display/intel_dpt.c:136:21: got void [noderef] __iomem *[assigned] iomem
v2: The code moved into intel_dpt.c
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712161815.24776-1-ville.syrjala@linux.intel.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Restore retry fault or prefetch range, or restore svm range after
eviction to map range to GPU with correct read or write access
permission.
Range may includes multiple VMAs, update GPU page table with offset of
prange, number of pages for each VMA according VMA access permission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check range access permission to restore GPU retry fault, if GPU retry
fault on address which belongs to VMA, and VMA has no read or write
permission requested by GPU, failed to restore the address. The vm fault
event will pass back to user space.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add MCA specific IP blocks targetting RAS features
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recent HDMI2.0 HF1-1 V-Swing testing showed that logging deep color
status helps in validation of testcase.
[How]
Add logging based on various color depths and pixel encoding
formats.
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Hersen Wu <hersenwu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding name field back to ras_common_if to work around error
injection failure with amdgpuras tool.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Building a randconfig here triggered:
ERROR: modpost: "pm_suspend_target_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
because the module export of that symbol happens in
kernel/power/suspend.c which is enabled with CONFIG_SUSPEND.
The ifdef guards in amdgpu_acpi_is_s0ix_supported(), however, test for
CONFIG_PM_SLEEP which is defined like this:
config PM_SLEEP
def_bool y
depends on SUSPEND || HIBERNATE_CALLBACKS
and that randconfig has:
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
leading to the module export missing.
Change the ifdeffery to depend directly on CONFIG_SUSPEND.
Fixes: 5706cb3c91 ("drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YSP6Lv53QV0cOAsd@zn.tnic
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Program trap handler settings to enable CWSR with software scheduler
on Aldebaran and Arcturus.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch limits the ref_div_max value to 100, during the
calculation of PLL feedback reference divider. With current
value (128), the produced fb_ref_div value generates unstable
output at particular frequencies. Radeon driver limits this
value at 100.
On Oland, when we try to setup mode 2048x1280@60 (a bit weird,
I know), it demands a clock of 221270 Khz. It's been observed
that the PLL calculations using values 128 and 100 are vastly
different, and look like this:
+------------------------------------------+
|Parameter |AMDGPU |Radeon |
| | | |
+-------------+----------------------------+
|Clock feedback | |
|divider max | 128 | 100 |
|cap value | | |
| | | |
| | | |
+------------------------------------------+
|ref_div_max | | |
| | 42 | 20 |
| | | |
| | | |
+------------------------------------------+
|ref_div | 42 | 20 |
| | | |
+------------------------------------------+
|fb_div | 10326 | 8195 |
+------------------------------------------+
|fb_div | 1024 | 163 |
+------------------------------------------+
|fb_dev_p | 4 | 9 |
|frac fb_de^_p| | |
+----------------------------+-------------+
With ref_div_max value clipped at 100, AMDGPU driver can also
drive videmode 2048x1280@60 (221Mhz) and produce proper output
without any blanking and distortion on the screen.
PS: This value was changed from 128 to 100 in Radeon driver also, here:
4b21ce1b4b
V1:
Got acks from:
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
V2:
- Restricting the changes only for OLAND, just to avoid any regression
for other cards.
- Changed unsigned -> unsigned int to make checkpatch quiet.
V3: Apply the change on SI family (not only oland) (Christian)
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eddy Qin <Eddy.Qin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A cleaner solution, only done once on boot.
[How]
Remove previous workaround and configure an extra
vmid one time on boot
Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RDMA is the only in-kernel user that uses __sg_alloc_table_from_pages to
append pages dynamically. In the next patch. That mode will be extended
and that function will get more parameters. So separate it into a unique
function to make such change more clear.
Link: https://lore.kernel.org/r/20210824142531.3877007-2-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Building a randconfig here triggered:
ERROR: modpost: "pm_suspend_target_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
because the module export of that symbol happens in
kernel/power/suspend.c which is enabled with CONFIG_SUSPEND.
The ifdef guards in amdgpu_acpi_is_s0ix_supported(), however, test for
CONFIG_PM_SLEEP which is defined like this:
config PM_SLEEP
def_bool y
depends on SUSPEND || HIBERNATE_CALLBACKS
and that randconfig has:
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
leading to the module export missing.
Change the ifdeffery to depend directly on CONFIG_SUSPEND.
Fixes: 5706cb3c91 ("drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YSP6Lv53QV0cOAsd@zn.tnic
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Clang warns:
In file included from drivers/gpu/drm/i915/gt/intel_reset.c:1514:
drivers/gpu/drm/i915/gt/selftest_hangcheck.c:465:62: warning: variable
'err' is uninitialized when used here [-Wuninitialized]
pr_err("[%s] Create context failed: %d!\n", engine->name, err);
^~~
...
drivers/gpu/drm/i915/gt/selftest_hangcheck.c:580:62: warning: variable
'err' is uninitialized when used here [-Wuninitialized]
pr_err("[%s] Create context failed: %d!\n", engine->name, err);
^~~
...
2 warnings generated.
This appears to be a copy and paste issue. Use ce directly using the %pe
specifier to pretty print the error code so that err is not used
uninitialized in these functions.
Fixes: 3a7b72665e ("drm/i915/selftest: Bump selftest timeouts for hangcheck")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813171158.2665823-1-nathan@kernel.org
(cherry picked from commit ac5a2dff42)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the intel_engine_create_pinned_context() function returns an error
pointer, then dereferencing "ce" will Oops. Use "vm" instead of
"ce->vm".
Fixes: cf58602164 ("drm/i915/gt: Pipelined page migration")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813113600.GC30697@kili
(cherry picked from commit ff12ce2c9c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
One of the cases that the bspec lists for when underrun recovery must be
disabled is "COG;" that note actually refers to eDP multi-segmented
operation (MSO). Let's ensure the this additional restriction is
honored by the driver.
Bspec: 50351
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: ba3b049f47 ("drm/i915/adl_p: Allow underrun recovery when possible")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816204112.2960624-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit c00e14cd4d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The kernel builds with -Werror=designated-init, and __designated_init
is used by CONFIG_GCC_PLUGIN_RANDSTRUCT for automatically selected (all
function pointer) structures. Include the field names in the init/exit
table. Avoids warnings like:
drivers/gpu/drm/i915/i915_module.c:59:4: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Fixes: a04ea6ae7c ("drm/i915: Use a table for i915_init/exit (v2)")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210817233357.2379455-1-keescook@chromium.org
(cherry picked from commit 90fd2194a0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm_dp_dpcd_read/write already has debug error message.
Drop redundant error messages which gives false
status even if correct value is read in drm_dp_dpcd_read().
v2: -Added fixes tag (Ankit)
v3: -Fixed build error (CI)
Fixes: 9488a030ac ("drm/i915: Add support for enabling link status and recovery")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131107.5531-1-swati2.sharma@intel.com
Clang warns:
In file included from drivers/gpu/drm/i915/gt/intel_reset.c:1514:
drivers/gpu/drm/i915/gt/selftest_hangcheck.c:465:62: warning: variable
'err' is uninitialized when used here [-Wuninitialized]
pr_err("[%s] Create context failed: %d!\n", engine->name, err);
^~~
...
drivers/gpu/drm/i915/gt/selftest_hangcheck.c:580:62: warning: variable
'err' is uninitialized when used here [-Wuninitialized]
pr_err("[%s] Create context failed: %d!\n", engine->name, err);
^~~
...
2 warnings generated.
This appears to be a copy and paste issue. Use ce directly using the %pe
specifier to pretty print the error code so that err is not used
uninitialized in these functions.
Fixes: 3a7b72665e ("drm/i915/selftest: Bump selftest timeouts for hangcheck")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813171158.2665823-1-nathan@kernel.org
DP 2.0 UHBR link rates always use 128b/132b channel encoding, which has
a different data bandwidth efficiency from 8b/10b. The computation is
slightly convoluted due to the units we use; this is all explained in
the added comment.
v2: Clarified comment (Manasi)
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8afd8d97a04c2d86c2dcadfed9f8e1f84272a13c.1629735412.git.jani.nikula@intel.com
The MST code uses actual link rates in the limits struct, while the DP
code in general uses indexes to the ->common_rates[] array. Fix the
confusion by using actual link rate values everywhere. This is a better
abstraction than some obscure index.
Rename the struct members while at it to ensure all the places are
covered.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d70ab7261abacd367d3a6a47102575eb88a55cd4.1629735412.git.jani.nikula@intel.com
Move the functionality into ttm_tt_fini and ttm_bo_tt_destroy instead.
We don't need this any more since we removed the unbind from the destroy
code paths in the drivers.
Also add a warning to ttm_tt_fini() if we try to fini a still populated TT
object.
v2: instead of reverting the patch move the functionality to different
places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-5-christian.koenig@amd.com
Doing this in radeon_ttm_tt_destroy() is to late.
It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-4-christian.koenig@amd.com
Doing this in nouveau_ttm_tt_destroy()/nouveau_sgdma_destroy() is to late.
It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-3-christian.koenig@amd.com
Doing this in amdgpu_ttm_backend_destroy() is to late.
It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-2-christian.koenig@amd.com
Doing this in vmw_ttm_destroy() is to late.
It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-1-christian.koenig@amd.com
In certain randconfigs, clang warns:
drivers/gpu/drm/exynos/exynos_drm_dma.c:121:19: warning: variable
'mapping' is uninitialized when used here [-Wuninitialized]
priv->mapping = mapping;
^~~~~~~
drivers/gpu/drm/exynos/exynos_drm_dma.c:111:16: note: initialize the
variable 'mapping' to silence this warning
void *mapping;
^
= NULL
1 warning generated.
This occurs when CONFIG_EXYNOS_IOMMU is enabled and both
CONFIG_ARM_DMA_USE_IOMMU and CONFIG_IOMMU_DMA are disabled, which makes
the code look like
void *mapping;
if (0)
mapping = arm_iommu_create_mapping()
else if (0)
mapping = iommu_get_domain_for_dev()
...
priv->mapping = mapping;
Add an else branch that initializes mapping to the -ENODEV error pointer
so that there is no more warning and the driver does not change during
runtime.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add the missing unlock before return from function g2d_runqueue_worker()
in the error handling case.
Fixes: 445d3bed75 ("drm/exynos: use pm_runtime_resume_and_get()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This was added in commit 05e265841f ("drm/i915/dg1: add initial DG-1
definitions") so we could continue to add support for DG1 without
risk to expose a broken UAPI. Now that we added DG1 to the PCI ID list
i915 may bind to, remove the leftover.
Fixes: d5ef86b38e ("drm/i915: Add pci ids and uapi for DG1")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819210349.95103-1-lucas.demarchi@intel.com
schedule_delayed_work does not push back the work if it was already
scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms
after the first time GFXOFF was disabled and re-enabled, even if GFXOFF
was disabled and re-enabled again during those 100 ms.
This resulted in frame drops / stutter with the upcoming mutter 41
release on Navi 14, due to constantly enabling GFXOFF in the HW and
disabling it again (for getting the GPU clock counter).
To fix this, call cancel_delayed_work_sync when the disable count
transitions from 0 to 1, and only schedule the delayed work on the
reverse transition, not if the disable count was already 0. This makes
sure the delayed work doesn't run at unexpected times, and allows it to
be lock-free.
v2:
* Use cancel_delayed_work_sync & mutex_trylock instead of
mod_delayed_work.
v3:
* Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König)
v4:
* Fix race condition between amdgpu_gfx_off_ctrl incrementing
adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off
checking for it to be 0 (Evan Quan)
Cc: stable@vger.kernel.org
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3
Acked-by: Christian König <christian.koenig@amd.com> # v3
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some reason we run into an use case where a BO is already pinned
into GTT, but should be pinned into VRAM|GTT again.
Handle that case gracefully as well.
Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Users reported that after commit 2bbd6dba84 ("drm/i915: Try to use
fast+narrow link on eDP again and fall back to the old max strategy on
failure"), the screen starts to have wobbly effect.
Commit a5c936add6 ("drm/i915/dp: Use slow and wide link training for
everything") doesn't help either, that means the affected eDP 1.2 panels
only work with max params.
So use max params for panels < eDP 1.4 as Windows does to solve the
issue.
v3:
- Do the eDP rev check in intel_edp_init_dpcd()
v2:
- Check eDP 1.4 instead of DPCD 1.1 to apply max params
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3714
Fixes: 2bbd6dba84 ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure")
Fixes: a5c936add6 ("drm/i915/dp: Use slow and wide link training for everything")
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820075301.693099-1-kai.heng.feng@canonical.com
If the intel_engine_create_pinned_context() function returns an error
pointer, then dereferencing "ce" will Oops. Use "vm" instead of
"ce->vm".
Fixes: cf58602164 ("drm/i915/gt: Pipelined page migration")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813113600.GC30697@kili
schedule_delayed_work does not push back the work if it was already
scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms
after the first time GFXOFF was disabled and re-enabled, even if GFXOFF
was disabled and re-enabled again during those 100 ms.
This resulted in frame drops / stutter with the upcoming mutter 41
release on Navi 14, due to constantly enabling GFXOFF in the HW and
disabling it again (for getting the GPU clock counter).
To fix this, call cancel_delayed_work_sync when the disable count
transitions from 0 to 1, and only schedule the delayed work on the
reverse transition, not if the disable count was already 0. This makes
sure the delayed work doesn't run at unexpected times, and allows it to
be lock-free.
v2:
* Use cancel_delayed_work_sync & mutex_trylock instead of
mod_delayed_work.
v3:
* Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König)
v4:
* Fix race condition between amdgpu_gfx_off_ctrl incrementing
adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off
checking for it to be 0 (Evan Quan)
Cc: stable@vger.kernel.org
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3
Acked-by: Christian König <christian.koenig@amd.com> # v3
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some reason we run into an use case where a BO is already pinned
into GTT, but should be pinned into VRAM|GTT again.
Handle that case gracefully as well.
Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Considering Arcturus is a dedicated ASIC for computing, it
will be more proper to drop the support for fan speed reading
and setting. That's on the TODO list.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Polish the FBC stride override stuff:
- just call it override_cfb_stride since it'll be used on
more gens later
- Use REG_BIT() & co. for the registers and give everything
CHICKEN_ prefix since glk+ will have a different register
for this
- Use intel_de_rmw() for the RMW
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702204603.596-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On ILK+ we current do a nuke right after activating FBC. If my
memory isn't playing tricks on me this is actially required if
FBC didn't stay disabled for a full frame. In that case the
deactivate+reactivate may not invalidate the cfb. I'd have to
double chekc to be sure though.
So let's keep the nuke, and just extend it backwards to cover
all the platforms by doing it a bit higher up.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702204603.596-4-ville.syrjala@linux.intel.com
Add a new drm_connector_oob_hotplug_event() function and
oob_hotplug_event drm_connector_funcs member.
On some hardware a hotplug event notification may come from outside the
display driver / device. An example of this is some USB Type-C setups
where the hardware muxes the DisplayPort data and aux-lines but does
not pass the altmode HPD status bit to the GPU's DP HPD pin.
In cases like this the new drm_connector_oob_hotplug_event() function can
be used to report these out-of-band events.
Changes in v2:
- Make drm_connector_oob_hotplug_event() take a fwnode as argument and
have it call drm_connector_find_by_fwnode() internally. This allows
making drm_connector_find_by_fwnode() a drm-internal function and
avoids code outside the drm subsystem potentially holding on the
a drm_connector reference for a longer period.
Changes in v3:
- Drop the data argument to the drm_connector_oob_hotplug_event
function since it is not used atm. This can be re-added later when
a use for it actually arises.
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-5-hdegoede@redhat.com
Add a function to find a connector based on a fwnode.
This will be used by the new drm_connector_oob_hotplug_event()
function which is added by the next patch in this patch-set.
Changes in v2:
- Complete rewrite to use a global connector list in drm_connector.c
rather then using a class-dev-iter in drm_sysfs.c
Changes in v3:
- Add forward declaration for struct fwnode_handle to drm_crtc_internal.h
(fixes warning reported by kernel test robot <lkp@intel.com>)
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-4-hdegoede@redhat.com
Add a fwnode pointer to struct drm_connector and register an acpi_bus_type
for the connectors with the ACPI subsystem (when CONFIG_ACPI is enabled).
The adding of the fwnode pointer allows drivers to associate a fwnode
that represents a connector with that connector.
When the new fwnode pointer points to an ACPI-companion, then the new
acpi_bus_type will cause the ACPI subsys to bind the device instantiated
for the connector with the fwnode by calling acpi_bind_one(). This will
result in a firmware_node symlink under /sys/class/card#-<connecter-name>/
which helps to verify that the fwnode-s and connectors are properly
matched.
Changes in v2:
- Make drm_connector_cleanup() call fwnode_handle_put() on
connector->fwnode and document this
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-3-hdegoede@redhat.com
Give connector sysfs devices there own device_type, this allows us to
check if a device passed to functions dealing with generic devices is
a drm_connector or not.
A check like this is necessary in the drm_connector_acpi_bus_match()
function added in the next patch in this series.
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-2-hdegoede@redhat.com
This should give a more complete view of the various bits of internal
resource manager state, for device local-memory.
v2(Thomas):
- Move the region printing into a nice helper
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819093419.295636-2-matthew.auld@intel.com
Implement the debug hook for the buddy resource manager. For this we
want to print out the status of the memory manager, including how much
memory is still allocatable, what page sizes we have etc. This will be
triggered when TTM is unable to fulfil an allocation request for device
local-memory.
v2(Thomas):
- s/MB/MiB
- s/KB/KiB
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819093419.295636-1-matthew.auld@intel.com
It's only used by the for_i915_gem_ww() macro and we can use
the (typically) on-stack _err variable in its place.
v2:
- Don't clear the _err variable when entering the loop
(Matthew Auld, Maarten Lankhorst).
- Use parentheses around the _err macro argument.
- Fix up comment.
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816171444.105469-1-thomas.hellstrom@linux.intel.com
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>.
stdarg.h is the only userspace header commonly used in the kernel.
GPL 2 version of <stdarg.h> can be extracted from
http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Delete/fixup few includes in anticipation of global -isystem compile
option removal.
Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition
of uintptr_t error (one definition comes from <stddef.h>, another from
<linux/types.h>).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[why]
dcn301_calculate_wm_and_dl() causes flickering when external monitor is
connected.
This issue has been fixed before by commit 0e4c0ae59d
("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however
part of the fix was gone after commit 2cbcb78c9e ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next").
[how]
Use dcn30_calculate_wm_and_dlg() instead as in the original fix.
Fixes: 2cbcb78c9e ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Oliver Logush <oliver.logush@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 04ed8459f3 ("drm/amdgpu: remove chash") removes the chash
architecture and its corresponding config CHASH.
There is still a reference to CHASH in the config DRM_AMDGPU in
./drivers/gpu/drm/Kconfig.
Remove this obsolete reference to config CHASH.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
