Fix to return a negative error code from the error handling case instead
of 0 in function sun8i_dw_hdmi_bind().
Fixes: b7c7436a5f ("drm/sun4i: Implement A83T HDMI driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1605488969-5211-1-git-send-email-wangxiongfeng2@huawei.com
Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.
Note that for armada I also went ahead and made the ioctl array const.
Only cc'ing the driver people who've not been converted (everyone else
is way too much).
v2: Fix one misplaced const static, should be static const (0day)
v3:
- Improve commit message (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
When using the scaler on the A10-like frontend with single-planar formats,
the current code will setup the channel 0 filter (used for the R or Y
component) with a different phase parameter than the channel 1 filter (used
for the G/B or U/V components).
This creates a bleed out that keeps repeating on of the last line of the
RGB plane across the rest of the display. The Allwinner BSP either applies
the same phase parameter over both channels or use a separate one, the
condition being whether the input format is YUV420 or not.
Since YUV420 is both subsampled and multi-planar, and since YUYV is
subsampled but single-planar, we can rule out the subsampling and assume
that the condition is actually whether the format is single or
multi-planar. And it looks like applying the same phase parameter over both
channels for single-planar formats fixes our issue, while we keep the
multi-planar formats working properly.
Reported-by: Taras Galchenko <tpgalchenko@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-2-maxime@cerno.tech
The scaler filter phase setup in the allwinner kernel has two different
cases for setting up the scaler filter, the first one using different phase
parameters for the two channels, and the second one reusing the first
channel parameters on the second channel.
The allwinner kernel has a third option where the horizontal phase of the
second channel will be set to a different value than the vertical one (and
seems like it's the same value than one used on the first channel).
However, that code path seems to never be taken, so we can ignore it for
now, and it's essentially what we're doing so far as well.
Since we will have always the same values across each components of the
filter setup for a given channel, we can simplify a bit our frontend
structure by only storing the phase value we want to apply to a given
channel.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-1-maxime@cerno.tech
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
New driver:
Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config
-----BEGIN PGP SIGNATURE-----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=4H8J
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
- Fill asoc card owner in vc4.
- Program secondary CSC correctly in sun4i, and extend
register mapping to cover secondary CSC registers.
-----BEGIN PGP SIGNATURE-----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=AYyq
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9-rc6:
- Fill asoc card owner in vc4.
- Program secondary CSC correctly in sun4i, and extend
register mapping to cover secondary CSC registers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e3ab56cf-3b8e-9b21-f1b6-9a4989a52996@linux.intel.com
The new field 'dma_range_map' in struct device is used to facilitate the
use of single or multiple offsets between mapping regions of cpu addrs and
dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only
capable of holding a single uniform offset and had no region bounds
checking.
The function of_dma_get_range() has been modified so that it takes a single
argument -- the device node -- and returns a map, NULL, or an error code.
The map is an array that holds the information regarding the DMA regions.
Each range entry contains the address offset, the cpu_start address, the
dma_start address, and the size of the region.
of_dma_configure() is the typical manner to set range offsets but there are
a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
driver code. These cases now invoke the function
dma_direct_set_offset(dev, cpu_addr, dma_addr, size).
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[hch: various interface cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9epdgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG9IMH/jHCRSbcsIXHuQHn
xcRLlhrDHfXoBza7auHfPWx2+9DZsmaSJs/SEiTGNag0Bi7jBcWcwBpsep7iVG/+
WiftD5uOMhZigyuvfMFrt0mjr2Kr3wg5p58lwMBeBdm8iL5uKV8ehKsh05/Fral2
6hu3jP8L0PCZMpF+sZ7s2jlhfVUMmjA8VzXZCvgQtmhoraHiF3mzfkcSMxnHwBPO
HLo+TDDm49u+LbVsJT7+cSTiWxuUJCbix9Q4PCTx/BGg4ezYsjc6v0BnYRaYtrrA
1uYiT6PVBEUkYYBHKQlD3N2KnUmbKx7dGUF4t+peTg5/JiocAJMNi1N9Qzvv7N6Q
CqTiuio=
=q+kJ
-----END PGP SIGNATURE-----
Merge v5.9-rc5 into drm-next
Paul needs 1a21e5b930 ("drm/ingenic: Fix leak of device_node
pointer") and 3b5b005ef7 ("drm/ingenic: Fix driver not probing when
IPU port is missing") from -fixes to be able to merge further ingenic
patches into -next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
-----BEGIN PGP SIGNATURE-----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=pqMB
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-09-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9-rc5:
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/478b49d1-b1b3-c983-7056-8a89249be435@mblankhorst.nl
"Allwinner V3s" has secondary video layer (VI).
Decoded video is displayed in wrong colors until
secondary CSC registers are programmed correctly.
Fixes: 8830293905 ("drm/sun4i: Add DE2 CSC library")
Signed-off-by: Martin Cerveny <m.cerveny@computer.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-2-m.cerveny@computer.org
UAPI Changes:
None
Cross-subsystem Changes:
* Moves a bunch of miscellaneous DP code from the i915 driver into a set
of shared DRM DP helpers
Core Changes:
* New DRM DP helpers (see above)
Driver Changes:
* Implements usage of the aforementioned DP helpers in the nouveau
driver, along with some other various HPD related cleanup for nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/11e59ebdea7ee4f46803a21fe9b21443d2b9c401.camel@redhat.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into drm-next
Backmerge 5.9-rc4 as there is a nasty qxl conflict
that needs to be resolved.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Unlike we previously thought, the per-pixel alpha is just as broken on the
A20 as it is on the A10. Remove the quirk that says we can use it.
Fixes: dcf496a6a6 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-2-maxime@cerno.tech
Unlike what we previously thought, only the per-pixel alpha is broken on
the lowest plane and the per-plane alpha isn't. Remove the check on the
alpha property being set on the lowest plane to reject a mode.
Fixes: dcf496a6a6 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-1-maxime@cerno.tech
Function sun8i_vi_layer_get_csc_mode() is supposed to return CSC mode
but due to inproper return type (bool instead of u32) it returns just 0
or 1. Colors are wrong for YVU formats because of that.
Fixes: daab3d0e8e ("drm/sun4i: de2: csc_mode in de2 format struct is mostly redundant")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901220305.6809-1-jernej.skrabec@siol.net
It's writing too much data. regmap_bulk_write expects number of
register sized chunks to write, not a byte sized length of the
bounce buffer. Bounce buffer needs to be padded too, so that
regmap_bulk_write will not read past the end of the buffer.
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828125032.937148-1-megous@megous.com
If sun8i_r40_tcon_tv_set_mux() succeed, sun8i_r40_tcon_tv_set_mux()
doesn't have a corresponding put_device(). Thus add put_device()
to fix the exception handling for this function implementation.
Fixes: 0305189afb ("drm/sun4i: tcon: Add support for R40 TCON")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826010826.1785487-1-yukuai3@huawei.com
The LVDS controller can invert the polarity / lanes of the LVDS output.
The default polarity causes some issues on some panels.
However, U-Boot has always used the opposite polarity without any reported
issue, and the only currently supported LVDS panel in-tree (the TBS A711)
seems to be able to work with both settings.
Let's just use the same polarity than U-Boot to be more consistent and
hopefully support all the panels.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Ondrej Jirman <megous@megous.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200704133803.37330-1-maxime@cerno.tech
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8nLmkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGBEkH/RJAnEan4gcdkBDf
2xS0yk4XLMjKZwbz61VSeKMUBkGCsh1cWsaAtJJAIVYj/6o/7mld01sZCnOASLnJ
ET0nXL2NiT/f+prYkTE5qeYH225/Yfh5jgmrqZtx/uXFCwgE5Nzi3f72IXQDmCR+
kmpNhNox3YqQTKXhv7DXobDKcO0n8nZavnhxmA9SBZn2h9RHvmvJghD0UOfLjMpA
1SbknaE67n5JN/JjI6TkYWk4nuJmqfvmBL5IYVDEZYO4UlM5Bqzhw0XN7Ax70K3M
KRK/eiqRmNwun5MxWnbzQU7t7iTgVmzjHLTpWGcM3V4blgGXC3uhjc+p/R8KTQUE
bIydSzs=
=fDeo
-----END PGP SIGNATURE-----
Merge tag 'v5.8' into drm-next
I need to backmerge 5.8 as I've got a bunch of fixes sitting
on an rc7 base that I want to land.
Signed-off-by: Dave Airlie <airlied@redhat.com>
These functions are now empty and no longer
useful so remove the functions and their uses.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Bernard Zhao <bernard@vivo.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>,
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Icenowy Zheng <icenowy@aosc.io>,
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: dri-devel@lists.freedesktop.org,
Cc: linux-kernel@vger.kernel.org
Cc: opensource.kernel@vivo.com
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # Fixed build and a few warnings
Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larget cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
-
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages
-----BEGIN PGP SIGNATURE-----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=Yvtd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge v5.8-rc6 into drm-next
I've got a silent conflict + two trees based on fixes to merge.
Fixes a silent merge with amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
When the extra HPD polling in sun4i_hdmi was removed, the result of
HPD was accidentally inverted.
Fix this by inverting the check.
Fixes: bda8eaa6de ("drm: sun4i: hdmi: Remove extra HPD polling")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.org
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
-----BEGIN PGP SIGNATURE-----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=72wu
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b1e53620-7937-895c-bfcf-ed208be59c7c@linux.intel.com
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
-----BEGIN PGP SIGNATURE-----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=ZmKI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
To prepare for making connector creation optional in the driver, pass
the drm_display_info explicitly to dw_hdmi_support_scdc(). The pointer
is passed to the callers where required, particularly to the
dw_hdmi_phy_ops .init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-19-laurent.pinchart+renesas@ideasonboard.com
Replace the drm_connector pointer passed to the .mode_valid() function
with a const drm_display_info pointer, as that's all the function should
need. Use the display info passed to the bridge .mode_valid() operation
instead of retrieving it from the connector, to prepare for make
connector creation optional.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-16-laurent.pinchart+renesas@ideasonboard.com
Platform glue drivers for dw_hdmi may need to access device-specific
data from their .mode_valid() implementation. They currently have no
clean way to do so, and one driver hacks around it by accessing the
dev_private data of the drm_device retrieved from the connector.
Add a priv_data void pointer to the dw_hdmi_plat_data structure, and
pass it to the .mode_valid() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-12-laurent.pinchart+renesas@ideasonboard.com
The main DRM device is actually a virtual device so it doesn't have the
iommus property, which is instead on the DMA masters, in this case the
mixers.
Add a call to of_dma_configure with the mixers DT node but on the DRM
virtual device to configure it in the same way than the mixers.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech
(cherry picked from commit b718102dbd)
[Maxime: Applied to -fixes since it missed the merge window and display is
broken without it]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix
-----BEGIN PGP SIGNATURE-----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=IBzW
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"One sun4i fix and a connector hotplug race The ast fix is for a
regression in 5.6, and one of the i915 ones fixes an oops reported by
dhowells.
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix"
* tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fix missing break in switch statement for format->cpp[0] case 4
drm/sun4i: hdmi ddc clk: Fix size of m divider
drm/i915/display: Only query DP state of a DDI encoder
drm/i915/params: fix i915.reset module param type
drm/i915/gem: Mark the buffer pool as active for the cmdparser
drm/connector: notify userspace on hotplug after register complete
Rename the macro to DRM_GEM_CMA_DRIVER_OPS_VMAP to align naming with
SHMEM helpers and drm_gem_cma_prime_import_sg_table_vmap(). An variant of
the macro is provided for drivers that override the default .dumb_create
callback. Adapt drivers to the changes.
v3:
* rename macro to signal implicit vmap on imported buffers
v2:
* provide DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-3-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----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=KNAo
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
The main DRM device is actually a virtual device so it doesn't have the
iommus property, which is instead on the DMA masters, in this case the
mixers.
Add a call to of_dma_configure with the mixers DT node but on the DRM
virtual device to configure it in the same way than the mixers.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech
Older compilers warn about initializers with incorrect curly
braces:
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function 'sun6i_dsi_encoder_enable':
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: missing braces around initializer [-Werror=missing-braces]
union phy_configure_opts opts = { 0 };
^
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: (near initialization for 'opts.mipi_dphy') [-Werror=missing-braces]
Use the GNU empty initializer extension to avoid this.
Fixes: bb3b6fcb68 ("sun6i: dsi: Convert to generic phy handling")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428215105.3928459-1-arnd@arndb.de
gpiod_get_value() can return negative values if an error occurs.
In several places this error code was ignored.
Ensure that errors codes are handled correctly throughout the CEC
pin framework and CEC pin drivers.
The return code of the cec_pin_ops read() callback had to be changed
from 'bool' to 'int', which mean the prototype of that callback in the
sun4i drm driver also had to be changed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6cf5a7-3f27-5425-4d6a-550a17bc51e3@web.de
The ingenic driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-15-tzimmermann@suse.de
Now that de2_fmt_info contains only DRM <-> HW format mapping, it
doesn't make sense to return pointer to structure when searching by DRM
format. Rework that to return only HW format instead.
This doesn't make any functional change.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-7-jernej.skrabec@siol.net
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge v5.6-rc5 into drm-next
Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
DE3 VI layers support alpha blending, but DE2 VI layers do not.
Additionally, DE3 VI layers support 10-bit RGB and YUV formats.
Make a separate list for DE3.
Fixes: c50519e6db ("drm/sun4i: Add basic support for DE3")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-3-jernej.skrabec@siol.net
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:
- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.
- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.
- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).
In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).
Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.
The change is based on the following semantic patch, with manual review
and edits.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.attach = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
int fn(
struct drm_bridge *bridge
+ , enum drm_bridge_attach_flags flags
)
{
... when != S
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
S1
...
}
@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
int fn(
struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags
) {
<...
drm_bridge_attach(E1, E2, E3
+ , flags
)
...>
}
@@
expression E1, E2, E3;
@@
drm_bridge_attach(E1, E2, E3
+ , 0
)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
A20 SoC (found in Cubieboard 2 among others) requires different LVDS set
up procedure than A33. Timing controller (tcon) driver only implements
sun6i-style procedure, that doesn't work on A20 (sun7i).
Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219180858.4806-6-andrey.lebedev@gmail.com
Timing controllers on A20 are not equivalent: tcon0 on A20 supports
LVDS output and tcon1 does not. Separate the capabilities by
introducing independent set of quirks for each of the tcons.
Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219180858.4806-3-andrey.lebedev@gmail.com
We need to make sure that the DRM driver is fully registered before
allowing the panel to be attached. Otherwise, we may trigger a hotplug
event before sun4i_framebuffer_init() sets up drm->mode_config.funcs,
causing a NULL pointer dereference.
Fixes: 1a2703bd73 ("drm/sun4i: dsi: Allow binding the host without a panel")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200217060906.15152-1-samuel@sholland.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5JsVQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHZEH+wddtJO4dZk5TZdF
KZB2w2ldsCvrBZAmas1TVvm8ncvUf+ATUZcSIzvZ3YbLmxsuLF2Cz3kD+n+36Mvy
ejwq8Scl7jwnouYps/Gfd6rRj/uCafqST4qp15GMGeiy2ST4A8dJrv5IAgZhD8/N
SN1bSr1AXpZ2JlEzzLDQ/NdVoNMS6IzCOsaINZcc60/XQoQZFRBWamMJFqu+CmXD
SBJOybQNFJhziy45cGZSAl+67sSCcoPftwTs0Stu4CJsvFWRb3MsbNTDS51Hjcc4
3tdgGOhoNXzyzZr96MEAHmiaW4VLQv0PGgUfOajE35viMz48OrwCTru8Kbuae3XM
YHV4qJk=
=yiem
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkpecgAKCRDj7w1vZxhR
xU4CAQD/8ZzfYroiiEI7FHEgvnuldGYZqA9kbNAO2Vueeac0OgD+Jojewdxy+pJ9
dxfA/POdtzx3hOdN+U1YgaDC0hbXwww=
=XgKq
-----END PGP SIGNATURE-----
Merge v5.6-rc2 into drm-misc-next
Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The driver currently uses runtime PM to perform some of the module
initialization and cleanup. This has three problems:
1) There is no Kconfig dependency on CONFIG_PM, so if runtime PM is
disabled, the driver will not work at all, since the module will
never be initialized.
2) The driver does not ensure that the device is suspended when
sun6i_dsi_probe() fails or when sun6i_dsi_remove() is called. It
simply disables runtime PM. From the docs of pm_runtime_disable():
The device can be either active or suspended after its runtime PM
has been disabled.
And indeed, the device will likely still be active if sun6i_dsi_probe
fails. For example, if the panel driver is not yet loaded, we have
the following sequence:
sun6i_dsi_probe()
pm_runtime_enable()
mipi_dsi_host_register()
of_mipi_dsi_device_add(child)
...device_add()...
__device_attach()
pm_runtime_get_sync(dev->parent) -> Causes resume
bus_for_each_drv()
__device_attach_driver() -> No match for panel
pm_runtime_put(dev->parent) -> Async idle request
component_add()
__component_add()
try_to_bring_up_masters()
try_to_bring_up_master()
sun4i_drv_bind()
component_bind_all()
component_bind()
sun6i_dsi_bind() -> Fails with -EPROBE_DEFER
mipi_dsi_host_unregister()
pm_runtime_disable()
__pm_runtime_disable()
__pm_runtime_barrier() -> Idle request is still pending
cancel_work_sync() -> DSI host is *not* suspended!
Since the device is not suspended, the clock and regulator are never
disabled. The imbalance causes a WARN at devres free time.
3) The driver relies on being suspended when sun6i_dsi_encoder_enable()
is called. The resume callback has a comment that says:
Some part of it can only be done once we get a number of
lanes, see sun6i_dsi_inst_init
And then part of the resume callback only runs if dsi->device is not
NULL (that is, if sun6i_dsi_attach() has been called). However, as
the above call graph shows, the resume callback is guaranteed to be
called before sun6i_dsi_attach(); it is called before child devices
get their drivers attached.
Therefore, part of the controller initialization will only run if the
device is suspended between the calls to mipi_dsi_host_register() and
component_add() (which ends up calling sun6i_dsi_encoder_enable()).
Again, as shown by the above call graph, this is not the case. It
appears that the controller happens to work because it is still
initialized by the bootloader.
Because the connector is hardcoded to always be connected, the
device's runtime PM reference is not dropped until system suspend,
when sun4i_drv_drm_sys_suspend() ends up calling
sun6i_dsi_encoder_disable(). However, that is done as a system sleep
PM hook, and at that point the system PM core has already taken
another runtime PM reference, so sun6i_dsi_runtime_suspend() is
not called. Likewise, by the time the PM core releases its reference,
sun4i_drv_drm_sys_resume() has already re-enabled the encoder.
So after system suspend and resume, we have *still never called*
sun6i_dsi_inst_init(), and now that the rest of the display pipeline
has been reset, the DSI host is unable to communicate with the panel,
causing VBLANK timeouts.
Fix all of these issues by inlining the runtime PM hooks into the
encoder enable/disable functions, which are guaranteed to run after a
panel is attached. This allows sun6i_dsi_inst_init() to be called
unconditionally. Furthermore, this causes the hardware to be turned off
during system suspend and reinitialized on resume, which was not
happening before.
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-4-samuel@sholland.org
Currently, the DSI host blocks binding the display pipeline until the
panel is available. This unnecessarily prevents other display outpus
from working, and adds logspam to dmesg when the panel driver is built
as a module (the component master is unsuccessfully brought up several
times during boot).
Flip the dependency, instead requiring the host to be bound before the
panel is attached. The panel driver provides no functionality outside of
the display pipeline anyway.
Since the panel is now probed after the DRM connector, we need a hotplug
event to turn on the connector after the panel is attached.
This has the added benefit of fixing panel module removal/insertion.
Previously, the panel would be turned off when its module was removed.
But because the connector state was hardcoded, nothing knew to turn the
panel back on when it was re-attached. Now, with hotplug events
available, the connector state will follow the panel module state, and
the panel will be re-enabled properly.
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-3-samuel@sholland.org
The continued use of an ERR_PTR to signify "no panel" outside of
sun6i_dsi_attach is confusing because it is a double negative. Because
the connector always reports itself as connected, there is also the
possibility of sending an ERR_PTR to drm_panel_get_modes(), which would
crash.
Solve both of these by only storing the panel pointer if it is valid.
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-2-samuel@sholland.org
- Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3.
- Fix null pointer deref in drm_dp_mst_process_up_req().
-----BEGIN PGP SIGNATURE-----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=VCDX
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v5.6:
- Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3.
- Fix null pointer deref in drm_dp_mst_process_up_req().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com
This reverts commit 9db9c0cf58.
Setting mode_config.allow_fb_modifiers manually is completely
unnecessary. It is set automatically by drm_universal_plane_init() based
on the fact if modifier list is provided or not. Even more, it breaks
DE2 and DE3 as they don't support any modifiers beside linear. Modifiers
aware applications can be confused by provided empty modifier list - at
least linear modifier should be included, but it's not for DE2 and DE3.
Fixes: 9db9c0cf58 ("drm/sun4i: drv: Allow framebuffer modifiers in mode config")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126065937.9564-1-jernej.skrabec@siol.net
The DRC needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-2-maxime@cerno.tech
The backend needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-1-maxime@cerno.tech
In commit 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.
However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.
Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.
This fixes the scrolling artifacts seen on my A13 tablet.
Fixes: 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org
UAPI Changes:
- Commandline parser: Add support for panel orientation, and per-mode options.
- Fix IOCTL naming for dma-buf heaps.
Cross-subsystem Changes:
- Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi.
- Change DMA-BUF system-heap's name to system.
- Fix leak in error handling in dma_heap_ioctl(), and make a symbol static.
- Fix udma-buf cpu access.
- Fix ti devicetree bindings.
Core Changes:
- Add CTA-861-G modes with VIC >= 193.
- Change error handling and remove bug_on in *drm_dev_init.
- Export drm_panel_of_backlight() correctly once more.
- Add support for lvds decoders.
- Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo.
Driver Changes:
- Add support for dsi/px30 to rockchip.
- Add fb damage support to virtio.
- Use dma_resv locking wrappers in vc4, msm, etnaviv.
- Make functions in virtio static, and perform some simplifications.
- Add suspend support to sun4i.
- Add A64 mipi dsi support to sun4i.
- Add runtime pm suspend to komeda.
- Associated driver fixes.
-----BEGIN PGP SIGNATURE-----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=ye8f
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-01-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Commandline parser: Add support for panel orientation, and per-mode options.
- Fix IOCTL naming for dma-buf heaps.
Cross-subsystem Changes:
- Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi.
- Change DMA-BUF system-heap's name to system.
- Fix leak in error handling in dma_heap_ioctl(), and make a symbol static.
- Fix udma-buf cpu access.
- Fix ti devicetree bindings.
Core Changes:
- Add CTA-861-G modes with VIC >= 193.
- Change error handling and remove bug_on in *drm_dev_init.
- Export drm_panel_of_backlight() correctly once more.
- Add support for lvds decoders.
- Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo.
Driver Changes:
- Add support for dsi/px30 to rockchip.
- Add fb damage support to virtio.
- Use dma_resv locking wrappers in vc4, msm, etnaviv.
- Make functions in virtio static, and perform some simplifications.
- Add suspend support to sun4i.
- Add A64 mipi dsi support to sun4i.
- Add runtime pm suspend to komeda.
- Associated driver fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efc11139-1653-86bc-1b0f-0aefde219850@linux.intel.com
The MIPI DSI controller in Allwinner A64 is similar to A33.
But unlike A33, A64 doesn't have DSI_SCLK gating so add compatible
for Allwinner A64 with uninitialized has_mod_clk driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-6-jagan@amarulasolutions.com
regmap has special API to enable the controller bus clock while
initializing register space, and current driver is using
devm_regmap_init_mmio_clk which require to specify bus
clk_id argument as "bus"
But, the usage of clocks are varies between different Allwinner
DSI controllers. Clocking in A33 would need bus and mod clocks
where as A64 would need only bus clock.
Since A64 support only single bus clock, it is optional to
specify the clock-names on the controller device tree node.
So using NULL on clk_id would get the attached clock.
To support clk_id as "bus" and "NULL" during clock enablement
between controllers, this patch add generic code to handle
the bus clock using regmap_mmio_attach_clk with associated
regmap APIs.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-5-jagan@amarulasolutions.com
As per the user manual, look like mod clock is not mandatory
for all Allwinner MIPI DSI controllers, it is connected to
CLK_DSI_SCLK for A31 and not available in A64.
So, add compatible check for A31 and get mod clock accordingly.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-4-jagan@amarulasolutions.com
When the HDMI unbinds drm_connector_cleanup() and drm_encoder_cleanup()
are called. This also happens when the connector and the encoder are
destroyed. This double call triggers a NULL pointer exception.
The patch fixes this by removing the cleanup calls in the unbind
function.
Cc: <stable@vger.kernel.org>
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217124632.20820-1-stefan@olimex.com
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=Hj7G
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of stuff in here, though it hasn't been too insane this merge
apart from dealing with the security fun.
uapi:
- export different colorspace properties on DP vs HDMI
- new fourcc for ARM 16x16 block format
- syncobj: allow querying last submitted timeline value
- DRM_FORMAT_BIG_ENDIAN defined as unsigned
core:
- allow using gem vma manager in ttm
- connector/encoder/bridge doc fixes
- allow more than 3 encoders for a connector
- displayport mst suspend/resume reprobing support
- vram lazy unmapping, uniform vram mm and gem vram
- edid cleanups + AVI informframe bar info
- displayport helpers - dpcd parser added
dp_cec:
- Allow a connector to be associated with a cec device
ttm:
- pipelining with no_gpu_wait fix
- always keep BOs on the LRU
sched:
- allow free_job routine to sleep
i915:
- Block userptr from mappable GTT
- i915 perf uapi versioning
- OA stream dynamic reconfiguration
- make context persistence optional
- introduce DRM_I915_UNSTABLE Kconfig
- add fake lmem testing under unstable
- BT.2020 support for DP MSA
- struct mutex elimination
- Tigerlake display/PLL/power management improvements
- Jasper Lake PCH support
- refactor PMU for multiple GPUs
- Icelake firmware update
- Split out vga + switcheroo code
amdgpu:
- implement dma-buf import/export without helpers
- vega20 RAS enablement
- DC i2c over aux fixes
- renoir GPU reset
- DC HDCP support
- BACO support for CI/VI asics
- MSI-X support
- Arcturus EEPROM support
- Arcturus VCN encode support
- VCN dynamic powergating on RV/RV2
amdkfd:
- add navi12/14/renoir support to kfd
radeon:
- SI dpm fix ported from amdgpu
- fix bad DMA on ppc platforms
gma500:
- memory leak fixes
qxl:
- convert to new gem mmap
exynos:
- build warning fix
komeda:
- add aclk sysfs attribute
v3d:
- userspace cleanup uapi change
i810:
- fix for underflow in dispatch ioctls
ast:
- refactor show_cursor
mgag200:
- refactor show_cursor
arcgpu:
- encoder finding improvements
mediatek:
- mipi_tx, dsi and partial crtc support for MT8183 SoC
- rotation support
meson:
- add suspend/resume support
omap:
- misc refactors
tegra:
- DisplayPort support for Tegra 210, 186 and 194.
- IOMMU-backed DMA API fixes
panfrost:
- fix lockdep issue
- simplify devfreq integration
rcar-du:
- R8A774B1 SoC support
- fixes for H2 ES2.0
sun4i:
- vcc-dsi regulator support
virtio-gpu:
- vmexit vs spinlock fix
- move to gem shmem helpers
- handle large command buffers with cma"
* tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits)
drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.
drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF
drm/amdgpu/gfx10: re-init clear state buffer after gpu reset
merge fix for "ftrace: Rework event_create_dir()"
drm/amdgpu: Update Arcturus golden registers
drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access
drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt
Revert "drm/amd/display: enable S/G for RAVEN chip"
drm/amdgpu: disable gfxoff on original raven
drm/amdgpu: remove experimental flag for Navi14
drm/amdgpu: disable gfxoff when using register read interface
drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)
drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
drm/radeon: fix bad DMA from INTERRUPT_CNTL2
drm/amd/display: Fix debugfs on MST connectors
drm/amdgpu/nv: add asic func for fetching vbios from rom directly
drm/amdgpu: put flush_delayed_work at first
drm/amdgpu/vcn2.5: fix the enc loop with hw fini
...
The datasheet of V3s (and various other chips) wrote
that TCON0_DCLK_DIV can be >= 1 if only dclk is used,
and must >= 6 if dclk1 or dclk2 is used. As currently
neither dclk1 nor dclk2 is used (no writes to these
bits), let's set minimal division to 1.
If this minimal division is 6, some common dot clock
frequencies can't be produced (e.g. 30MHz will not be
possible and will fallback to 25MHz), which is
obviously not an expected behaviour.
Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
The LCD timing definitions between Linux DRM vs Allwinner are different,
below diagram shows this clear differences.
Active Front Sync Back
Region Porch Porch
<-----------------------><----------------><--------------><-------------->
//////////////////////|
////////////////////// |
////////////////////// |.................. ................
________________
<----- [hv]display ----->
<------------- [hv]sync_start ------------>
<--------------------- [hv]sync_end ---------------------->
<-------------------------------- [hv]total ------------------------------>
<----- lcd_[xy] --------> <- lcd_[hv]spw ->
<---------- lcd_[hv]bp --------->
<-------------------------------- lcd_[hv]t ------------------------------>
The DSI driver misinterpreted the vbp term from the BSP code to refer
only to the backporch, when in fact it was backporch + sync. Thus the
driver incorrectly used the vertical front porch plus sync in its
calculation of the DRQ set bit value, when it should not have included
the sync timing.
Including additional sync timings leads to flip_done timed out as:
WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
[CRTC:46:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00029-g09e5b0ed0a58 #18
Hardware name: Allwinner sun8i Family
Workqueue: events deferred_probe_work_func
[<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
[<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
[<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
[<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
[<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
[<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
[<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
[<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
[<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
[<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
[<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
[<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
[<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
[<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
[<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
[<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
[<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
[<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
[<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
[<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
[<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
[<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
[<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
[<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0)
[<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140)
[<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
[<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c)
[<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8)
[<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160)
[<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8)
[<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c)
[<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c)
[<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90)
[<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
[<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
[<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
[<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xde539fb0 to 0xde539ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 495200a78b24980e ]---
random: fast init done
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out
With the terms(as described in above diagram) fixed, the panel
displays correctly without any timeouts.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006160303.24413-2-icenowy@aosc.io
The formula in the BSP kernel indicates that a 16-byte overhead is used
when sending the HFP. However, this value is currently set to 6 in the
sun6i_mipi_dsi driver, which makes some panels flashing.
Fix this overhead value.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006160303.24413-3-icenowy@aosc.io
We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit da676c6aa6.
The original commit adds a start parameter to the calculation of the
start delay according to some old BSP versions from Allwinner. However,
there're two ways to add this delay -- add it in DSI controller or add
it in the TCON. Add it in both controllers won't work.
The code before this commit is picked from new versions of BSP kernel,
which has a comment for the 1 that says "put start_delay to tcon". By
checking the sun4i_tcon0_mode_set_cpu() in sun4i_tcon driver, it has
already added this delay, so we shouldn't repeat to add the delay in DSI
controller, otherwise the timing won't match.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001080253.6135-2-icenowy@aosc.io
The LCD timing definitions between Linux DRM vs Allwinner are different,
below diagram shows this clear differences.
Active Front Sync Back
Region Porch Porch
<-----------------------><----------------><--------------><-------------->
//////////////////////|
////////////////////// |
////////////////////// |.................. ................
________________
<----- [hv]display ----->
<------------- [hv]sync_start ------------>
<--------------------- [hv]sync_end ---------------------->
<-------------------------------- [hv]total ------------------------------>
<----- lcd_[xy] --------> <- lcd_[hv]spw ->
<---------- lcd_[hv]bp --------->
<-------------------------------- lcd_[hv]t ------------------------------>
The DSI driver misinterpreted the hbp term from the BSP code to refer
only to the backporch, when in fact it was backporch + sync. Thus the
driver incorrectly used the horizontal front porch plus sync in its
calculation of the DRQ set bit value, when it should not have included
the sync timing.
Including additional sync timings leads to flip_done timed out as:
WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
[CRTC:46:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13
Hardware name: Allwinner sun8i Family
Workqueue: events deferred_probe_work_func
[<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
[<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
[<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
[<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
[<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
[<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
[<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
[<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
[<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
[<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
[<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
[<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
[<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
[<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
[<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
[<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
[<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
[<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
[<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
[<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
[<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
[<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
[<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
[<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0)
[<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140)
[<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
[<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c)
[<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8)
[<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160)
[<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8)
[<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c)
[<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c)
[<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90)
[<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
[<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
[<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
[<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xde539fb0 to 0xde539ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace b57eb1e5c64c6b8b ]---
random: fast init done
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out
With the terms(as described in above diagram) fixed, the panel
displays correctly without any timeouts.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-2-jagan@amarulasolutions.com
Allwinner MIPI DSI controllers are supplied with SoC
DSI power rails via VCC-DSI pin.
Add support for this supply pin by adding voltage
regulator handling code to MIPI DSI driver.
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-6-jagan@amarulasolutions.com
