core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement
-----BEGIN PGP SIGNATURE-----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=MByd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
'prev_engine' was declared inside the output loop and checked in the
inner after at least 1 pass of either loop. The variable should be
declared outside both loops as it needs to be persistent across the
entire loop structure.
Fixes: e5e32171a2 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211219001909.24348-1-matthew.brost@intel.com
(cherry picked from commit cbffbac9c1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Driver Changes:
- Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld)
- Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa)
- Fixed debugfs access crash if GuC failed to load (John Harrison)
- Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström)
- Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström)
- Exclude reserved stolen from driver use (Chris Wilson)
- Add memory region sanity checking and optional full test (Chris Wilson)
- Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett)
- Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost)
- Don't hog IRQs when destroying GuC contexts (John Harrison)
- Make GuC to Host communication more robust (Matthew Brost)
- Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst)
- Improve performance of reading GuC log from debugfs (John Harrison)
- Log when GuC fails to reset an engine (John Harrison)
- Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar)
- Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König)
- Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison)
- Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko)
- Add noreclaim annotations (Matthew Auld)
- Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost)
- Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti)
- Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison)
- Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa)
- Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior)
- Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi)
- Selftest for stealing of guc ids (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-6-andi.shyti@linux.intel.com
Rather than stealing bits from i915_sw_fence function pointer use
separate fields for function pointer and flags. If using two different
fields, the 4 byte alignment for the i915_sw_fence function pointer can
also be dropped.
v2:
(CI)
- Set new function field rather than flags in __i915_sw_fence_init
v3:
(Tvrtko)
- Remove BUG_ON(!fence->flags) in reinit as that will now blow up
- Only define fence->flags if CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is
defined
v4:
- Rebase, resend for CI
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116194929.10211-1-matthew.brost@intel.com
We should stop using the gen name and the "+" to reference
the newer platforms.
And on this case specifically we can simplify the debug
message even further.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015091129.83226-1-rodrigo.vivi@intel.com
Introduce 'set parallel submit' extension to connect UAPI to GuC
multi-lrc interface. Kernel doc in new uAPI should explain it all.
IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Daniel Vetter)
- Add IGT link and placeholder for media UMD link
v3:
(Kernel test robot)
- Fix warning in unpin engines call
(John Harrison)
- Reword a bunch of the kernel doc
v4:
(John Harrison)
- Add comment why perma-pin is done after setting gem context
- Update some comments / docs for proto contexts
v5:
(John Harrison)
- Rework perma-pin comment
- Add BUG_IN if context is pinned when setting gem context
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-17-matthew.brost@intel.com
When trying to bring IS_ACTIVE to linux/kconfig.h I thought it wouldn't
provide much value just encapsulating it in a boolean context. So I also
added the support for handling undefined macros as the IS_ENABLED()
counterpart. However the feedback received from Masahiro Yamada was that
it is too ugly, not providing much value. And just wrapping in a boolean
context is too dumb - we could simply open code it.
As detailed in commit babaab2f47 ("drm/i915: Encapsulate kconfig
constant values inside boolean predicates"), the IS_ACTIVE macro was
added to workaround a compilation warning. However after checking again
our current uses of IS_ACTIVE it turned out there is only
1 case in which it triggers a warning in clang (due
-Wconstant-logical-operand) and 2 in smatch. All the others
can simply use the shorter version, without wrapping it in any macro.
So here I'm dialing all the way back to simply removing the macro. That
single case hit by clang can be changed to make the constant come first,
so it doesn't think it's mask:
- if (context && CONFIG_DRM_I915_FENCE_TIMEOUT)
+ if (CONFIG_DRM_I915_FENCE_TIMEOUT && context)
As talked with Dan Carpenter, that logic will be added in smatch as
well, so it will also stop warning about it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005171728.3147094-1-lucas.demarchi@intel.com
Set number of engines before attempting to create contexts so the
function free_engines can clean up properly. Also check return of
alloc_engines for NULL.
v2:
(Tvrtko)
- Send as stand alone patch
(John Harrison)
- Check for alloc_engines returning NULL
v3:
(Checkpatch / Tvrtko)
- Remove braces around single line if statement
Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: d4433c7600 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001155825.6762-1-matthew.brost@intel.com
Now that we can handle destruction and re-creation of the arb session,
we can postpone the start of the session to the first submission that
requires it, to avoid keeping it running with no user.
v10: increase timeout when waiting in intel_pxp_start as firmware
session startup is slower right after boot.
v13: increase the same timeout by 50 milisec because previous timeout
was not enough to cover two lower level 100 milisec timeouts
in the session termination + creation steps.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-12-alan.previn.teres.alexis@intel.com
This api allow user mode to create protected buffers and to mark
contexts as making use of such objects. Only when using contexts
marked in such a way is the execution guaranteed to work as expected.
Contexts can only be marked as using protected content at creation time
(i.e. the parameter is immutable) and they must be both bannable and not
recoverable. Given that the protected session gets invalidated on
suspend, contexts created this way hold a runtime pm wakeref until
they're either destroyed or invalidated.
All protected objects and contexts will be considered invalid when the
PXP session is destroyed and all new submissions using them will be
rejected. All intel contexts within the invalidated gem contexts will be
marked banned. Userspace can detect that an invalidation has occurred via
the RESET_STATS ioctl, where we report it the same way as a ban due to a
hang.
v5: squash patches, rebase on proto_ctx, update kerneldoc
v6: rebase on obj create_ext changes
v7: Use session counter to check if an object it valid, hold wakeref in
context, don't add a new flag to RESET_STATS (Daniel)
v8: don't increase guilty count for contexts banned during pxp
invalidation (Rodrigo)
v9: better comments, avoid wakeref put race between pxp_inval and
context_close, add usage examples (Rodrigo)
v10: modify internal set/get-protected-context functions to not
return -ENODEV when setting PXP param to false or getting param
when running on pxp-unsupported hw or getting param when i915
was built with CONFIG_PXP off
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-11-alan.previn.teres.alexis@intel.com
We really only need memcpy restore for objects that affect the
operability of the migrate context. That is, primarily the page-table
objects of the migrate VM.
Add an object flag, I915_BO_ALLOC_PM_EARLY for objects that need early
restores using memcpy and a way to assign LMEM page-table object flags
to be used by the vms.
Restore objects without this flag with the gpu blitter and only objects
carrying the flag using TTM memcpy.
Initially mark the migrate, gt, gtt and vgpu vms to use this flag, and
defer for a later audit which vms actually need it. Most importantly, user-
allocated vms with pinned page-table objects can be restored using the
blitter.
Performance-wise memcpy restore is probably as fast as gpu restore if not
faster, but using gpu restore will help tackling future restrictions in
mappable LMEM size.
v4:
- Don't mark the aliasing ppgtt page table flags for early resume, but
rather the ggtt page table flags as intended. (Matthew Auld)
- The check for user buffer objects during early resume is pointless, since
they are never marked I915_BO_ALLOC_PM_EARLY. (Matthew Auld)
v5:
- Mark GuC LMEM objects with I915_BO_ALLOC_PM_EARLY to have them restored
before we fire up the migrate context.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-8-thomas.hellstrom@linux.intel.com
It's been invariant since
commit ccbc1b9794
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:30 2021 -0500
drm/i915/gem: Don't allow changing the VM on running contexts (v4)
this just completes the deed. I've tried to split out prep work for
more careful review as much as possible, this is what's left:
- get_ppgtt gets simplified since we don't need to grab a temporary
reference - we can rely on the temporary reference for the gem_ctx
while we inspect the vm. The new vm_id still needs a full
i915_vm_open ofc. This also removes the final caller of context_get_vm_rcu
- A pile of selftests can now just look at ctx->vm instead of
rcu_dereference_protected( , true) or similar things.
- All callers of i915_gem_context_vm also disappear.
- I've changed the hugepage selftest to set scrub_64K without any
locking, because when we inspect that setting we're also not taking
any locks either. It works because it's a selftests that's careful
(single threaded gives you nice ordering) and not a live driver
where races can happen from anywhere.
These can only be split up further if we have some intermediate state
with a bunch more rcu_dereference_protected(ctx->vm, true), just to
shut up lockdep and sparse.
The conversion to __rcu happened in
commit a4e7ccdac3
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 4 14:40:09 2019 +0100
drm/i915: Move context management under GEM
Note that we're not breaking the actual bugfix in there: The real
bugfix is pushing the i915_vm_relase onto a separate worker, to avoid
locking inversion issues. The rcu conversion was just thrown in for
entertainment value on top (no vm lookup isn't even close to anything
that's a hotpath where removing the single spinlock can be measured).
v2: Rebase over the change to move the i915_vm_put() into
i915_gem_context_release().
v3: Trivial conflict against repainted shed.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-9-daniel.vetter@ffwll.ch
Since
commit ccbc1b9794
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:30 2021 -0500
drm/i915/gem: Don't allow changing the VM on running contexts (v4)
the gem_ctx->vm can't change anymore. Plus we always set the
intel_context->vm, so might as well use the helper we have for that.
This makes it very clear that we always overwrite intel_context->vm
for userspace contexts, since the default is gt->vm, which is
explicitly reserved for kernel context use. It would be good to split
things up a bit further and avoid any possibility for an accident
where we run kernel stuff in userspace vm or the other way round.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-8-daniel.vetter@ffwll.ch
And use it anywhere we have open-coded checks for ctx->vm that really
only check for full ppgtt.
Plus for paranoia add a GEM_BUG_ON that checks it's really only set
when we have full ppgtt, just in case. gem_context->vm is different
since it's NULL in ggtt mode, unlike intel_context->vm or gt->vm,
which is always set.
v2: 0day found a testcase that I missed.
v3: Repaint shed (Jon, Tvrtko)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-7-daniel.vetter@ffwll.ch
Consolidates the "which is the vm my execbuf runs in" code a bit. We
do some get/put which isn't really required, but all the other users
want the refcounting, and I figured doing a function just for this
getparam to avoid 2 atomis is a bit much.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-6-daniel.vetter@ffwll.ch
The comment added in
commit b81dde7194
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue May 21 22:11:29 2019 +0100
drm/i915: Allow userspace to clone contexts on creation
and moved in
commit 27dbae8f36
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Nov 6 09:13:12 2019 +0000
drm/i915/gem: Safely acquire the ctx->vm when copying
suggested that i915_address_space were at least intended to be managed
through SLAB_TYPESAFE_BY_RCU:
* This ppgtt may have be reallocated between
* the read and the kref, and reassigned to a third
* context. In order to avoid inadvertent sharing
* of this ppgtt with that third context (and not
* src), we have to confirm that we have the same
* ppgtt after passing through the strong memory
* barrier implied by a successful
* kref_get_unless_zero().
But extensive git history search has not brough any such reuse to
light.
What has come to light though is that ever since
commit 2850748ef8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 4 14:39:58 2019 +0100
drm/i915: Pull i915_vma_pin under the vm->mutex
(yes this commit is earlier) the final i915_vma_put call has been
moved from i915_gem_context_free (now called _release) to
context_close, which means it's not actually safe anymore to access
the ctx->vm pointer without lock helds, because it might disappear at
any moment. Note that superficially things all still work, because the
i915_address_space is RCU protected since
commit b32fa81115
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jun 20 19:37:05 2019 +0100
drm/i915/gtt: Defer address space cleanup to an RCU worker
except the very clever macro above (which is designed to protected
against object reuse due to SLAB_TYPESAFE_BY_RCU or similar tricks)
results in an endless loop if the refcount of the ctx->vm ever
permanently drops to 0. Which it totally now can.
Fix that by moving the final i915_vm_put to where it should be.
Note that i915_gem_context is rcu protected, but _only_ the final
kfree. This means anyone who chases a pointer to a gem ctx solely
under the protection can pretty only call kref_get_unless_zero(). This
seems to be pretty much the case, aside from a bunch of cases that
consult the scheduling information without any further protection.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-3-daniel.vetter@ffwll.ch
gem context refcounting is another exercise in least locking design it
seems, where most things get destroyed upon context closure (which can
race with anything really). Only the actual memory allocation and the
locks survive while holding a reference.
This tripped up Jason when reimplementing the single timeline feature
in
commit 00dae4d3d3
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:12 2021 -0500
drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)
We could fix the bug by holding ctx->mutex in execbuf and clear the
pointer (again while holding the mutex) context_close, but it's
cleaner to just make the context object actually invariant over its
_entire_ lifetime. This way any other ioctl that's potentially racing,
but holding a full reference, can still rely on ctx->syncobj being
an immutable pointer. Which without this change, is not the case.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: 00dae4d3d3 ("drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-2-daniel.vetter@ffwll.ch
The only reason for this really is the i915_gem_engines->fence
callback engines_notify(), which exists purely as a fairly funky
reference counting scheme for that. Otherwise all other callers are
from process context, and generally fairly benign locking context.
Unfortunately untangling that requires some major surgery, and we have
a few i915_gem_context reference counting bugs that need fixing, and
they blow in the current hardirq calling context, so we need a
stop-gap measure.
Put a FIXME comment in when this should be removable again.
v2: Fix mock_context(), noticed by intel-gfx-ci.
Acked-by: Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-1-daniel.vetter@ffwll.ch
This essentially reverts
commit 89ff76bf9b
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Apr 2 13:42:18 2020 +0100
drm/i915/gem: Utilize rcu iteration of context engines
Note that the other use of __context_engines_await have disappeard in
the following commits:
ccbc1b9794 ("drm/i915/gem: Don't allow changing the VM on running contexts (v4)")
c7a71fc8ee ("drm/i915: Drop getparam support for I915_CONTEXT_PARAM_ENGINES")
4a766ae40e ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
None of these have any business to optimize their engine lookup with
rcu, unless extremely convincing benchmark data and a solid analysis
why we can't make that workload (whatever it is that does) faster with
a proper design fix.
Also since there's only one caller of context_apply_all left and it's
really just a loop, inline it and then inline the lopp body too. This
is how all other callers that take the engine lock loop over engines,
it's much simpler.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810130523.1972031-1-daniel.vetter@ffwll.ch
Disable bonding on gen12+ platforms aside from ones already supported by
the i915 - TGL, RKL, and ADL-S.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728192100.132425-1-matthew.brost@intel.com
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.
I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_luts to just a
slab_luts.
v2: Make slab static (Jason, 0day)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-5-daniel.vetter@ffwll.ch
When using GuC submission, if a context gets banned disable scheduling
and mark all inflight requests as complete.
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-25-matthew.brost@intel.com
Update the bonding extension to return -ENODEV when using GuC submission
as this extension fundamentally will not work with the GuC submission
interface.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-5-matthew.brost@intel.com
Implement GuC virtual engines. Rather simple implementation, basically
just allocate an engine, setup context enter / exit function to virtual
engine specific functions, set all other variables / functions to guc
versions, and set the engine mask to that of all the siblings.
v2: Update to work with proto-ctx
v3:
(Daniele)
- Drop include, add comment to intel_virtual_engine_has_heartbeat
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-2-matthew.brost@intel.com
Semaphores are an optimization and not required for basic GuC submission
to work properly. Disable until we have time to do the implementation to
enable semaphores and tune them for performance. Also long direction is
just to delete semaphores from the i915 so another reason to not enable
these for GuC submission.
This patch fixes an existing bugs where I915_ENGINE_HAS_SEMAPHORES was
not honored correctly.
v2: Reword commit message
v3:
(John H)
- Add text to commit indicating this also fixing an existing bug
v4:
(John H)
- s/bug/bugs
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-14-matthew.brost@intel.com
This essentially reverts
commit 84a1074920
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jan 24 11:36:08 2018 +0000
drm/i915: Shrink the GEM kmem_caches upon idling
mm/vmscan.c:do_shrink_slab() is a thing, if there's an issue with it
then we need to fix that there, not hand-roll our own slab shrinking
code in i915.
Also when this was added there was only one other caller of
kmem_cache_shrink (added 2005 to the acpi code). Now there's a 2nd one
outside of i915 code in a kunit test, which seems legit since that
wants to very carefully control what's in the kmem_cache. This out of
a total of over 500 calls to kmem_cache_create. This alone should have
been warning sign enough that we're doing something silly.
Noticed while reviewing a patch set from Jason to fix up some issues
in our i915_init() and i915_exit() module load/cleanup code. Now that
i915_globals.c isn't any different than normal init/exit functions, we
should convert them over to one unified table and remove
i915_globals.[hc] entirely.
v2: Improve commit message (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721183229.4136488-1-daniel.vetter@ffwll.ch
All the proto-context stuff for context creation exists to allow older
userspace drivers to set VMs and engine sets via SET_CONTEXT_PARAM.
Drivers need to update to use CONTEXT_CREATE_EXT_* for this going
forward. Force the issue by blocking the old mechanism on any future
hardware generations.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-31-jason@jlekstrand.net
Now that we have the whole engine set and VM at context creation time,
we can just assign those fields instead of creating first and handling
the VM and engines later. This lets us avoid creating useless VMs and
engine sets and lets us get rid of the complex VM setting code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-30-jason@jlekstrand.net
When the APIs were added to manage the engine set on a GEM context
directly from userspace, the questionable choice was made to allow
changing the engine set on a context at any time. This is horribly racy
and there's absolutely no reason why any userspace would want to do this
outside of trying to exercise interesting race conditions. By removing
support for CONTEXT_PARAM_ENGINES from ctx_setparam, we make it
impossible to change the engine set after the context has been fully
created.
This doesn't yet let us delete all the deferred engine clean-up code as
that's still used for handling the case where the client dies or calls
GEM_CONTEXT_DESTROY while work is in flight. However, moving to an API
where the engine set is effectively immutable gives us more options to
potentially clean that code up a bit going forward. It also removes a
whole class of ways in which a client can hurt itself or try to get
around kernel context banning.
v2 (Jason Ekstrand):
- Expand the commit mesage
v3 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_ENGINES returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-27-jason@jlekstrand.net
When the APIs were added to manage VMs more directly from userspace, the
questionable choice was made to allow changing out the VM on a context
at any time. This is horribly racy and there's absolutely no reason why
any userspace would want to do this outside of testing that exact race.
By removing support for CONTEXT_PARAM_VM from ctx_setparam, we make it
impossible to change out the VM after the context has been fully
created. This lets us delete a bunch of deferred task code as well as a
duplicated (and slightly different) copy of the code which programs the
PPGTT registers.
v2 (Jason Ekstrand):
- Expand the commit message
v3 (Daniel Vetter):
- Don't drop the __rcu on the vm pointer
v4 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_VM returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-26-jason@jlekstrand.net
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such as the context priority, others
are far trickier such as the VM or the set of engines. In order to swap
out the VM, for instance, we have to delay until all current in-flight
work is complete, swap in the new VM, and then continue. This leads to
a plethora of potential race conditions we'd really rather avoid.
In previous patches, we added a i915_gem_proto_context struct which is
capable of storing and tracking all such create parameters. This commit
delays the creation of the actual context until after the client is done
configuring it with SET_CONTEXT_PARAM. From the perspective of the
client, it has the same u32 context ID the whole time. From the
perspective of i915, however, it's an i915_gem_proto_context right up
until the point where we attempt to do something which the proto-context
can't handle. Then the real context gets created.
This is accomplished via a little xarray dance. When GEM_CONTEXT_CREATE
is called, we create a proto-context, reserve a slot in context_xa but
leave it NULL, the proto-context in the corresponding slot in
proto_context_xa. Then, whenever we go to look up a context, we first
check context_xa. If it's there, we return the i915_gem_context and
we're done. If it's not, we look in proto_context_xa and, if we find it
there, we create the actual context and kill the proto-context.
In order for this dance to work properly, everything which ever touches
a proto-context is guarded by drm_i915_file_private::proto_context_lock,
including context creation. Yes, this means context creation now takes
a giant global lock but it can't really be helped and that should never
be on any driver's fast-path anyway.
v2 (Daniel Vetter):
- Commit message grammatical fixes.
- Use WARN_ON instead of GEM_BUG_ON
- Rename lazy_create_context_locked to finalize_create_context_locked
- Rework the control-flow logic in the setparam ioctl
- Better documentation all around
v3 (kernel test robot):
- Make finalize_create_context_locked static
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-25-jason@jlekstrand.net
There's a big comment saying how useful it is but no one is using this
for anything anymore.
It was added in 2bfa996e03 ("drm/i915: Store owning file on the
i915_address_space") and used for debugfs at the time as well as telling
the difference between the global GTT and a PPGTT. In f6e8aa3871
("drm/i915: Report the number of closed vma held by each context in
debugfs") we removed one use of it by switching to a context walk and
comparing with the VM in the context. Finally, VM stats for debugfs
were entirely nuked in db80a1294c ("drm/i915/gem: Remove per-client
stats from debugfs/i915_gem_objects")
v2 (Daniel Vetter):
- Delete a struct drm_i915_file_private pre-declaration
- Add a comment to the commit message about history
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-24-jason@jlekstrand.net
We're about to start doing lazy context creation which means contexts
get created in i915_gem_context_lookup and we may start having more
errors than -ENOENT.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-23-jason@jlekstrand.net
This means that the proto-context needs to grow support for engine
configuration information as well as setparam logic. Fortunately, we'll
be deleting a lot of setparam logic on the primary context shortly so it
will hopefully balance out.
There's an extra bit of fun here when it comes to setting SSEU and the
way it interacts with PARAM_ENGINES. Unfortunately, thanks to
SET_CONTEXT_PARAM and not being allowed to pick the order in which we
handle certain parameters, we have think about those interactions.
v2 (Daniel Vetter):
- Add a proto_context_free_user_engines helper
- Comment on SSEU in the commit message
- Use proto_context_set_persistence in set_proto_ctx_param
v3 (Daniel Vetter):
- Fix a doc comment
- Do an explicit HAS_FULL_PPGTT check in set_proto_ctx_vm instead of
relying on pc->vm != NULL.
- Handle errors for CONTEXT_PARAM_PERSISTENCE
- Don't allow more resetting user engines
- Rework initialization of UCONTEXT_PERSISTENCE
v4 (Jason Ekstrand):
- Move hand-rolled initialization of UCONTEXT_PERSISTENCE to an
earlier patch
v5 (Jason Ekstrand):
- Move proto_context_set_persistence to this patch
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-22-jason@jlekstrand.net
What we really want to check is that size of the engines array, i.e.
args->size - sizeof(*user) is divisible by the element size, i.e.
sizeof(*user->engines) because that's what's required for computing the
array length right below the check. However, we're currently not doing
this and instead doing a compile-time check that sizeof(*user) is
divisible by sizeof(*user->engines) and avoiding the subtraction. As
far as I can tell, the only reason for the more confusing pair of checks
is to avoid a single subtraction of a constant.
The other thing the BUILD_BUG_ON might be trying to implicitly check is
that offsetof(user->engines) == sizeof(*user) and we don't have any
weird padding throwing us off. However, that's not the check it's doing
and it's not even a reliable way to do that check.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-21-jason@jlekstrand.net
This is the VM equivalent of i915_gem_context_lookup. It's only used
once in this patch but future patches will need to duplicate this lookup
code so it's better to have it in a helper.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-20-jason@jlekstrand.net
For now this is a no-op because everyone passes in a null SSEU but it
lets us get some of the error handling and selftest refactoring plumbed
through.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-19-jason@jlekstrand.net
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such the context priority, others are
far trickier such as the VM or the set of engines. In order to swap out
the VM, for instance, we have to delay until all current in-flight work
is complete, swap in the new VM, and then continue. This leads to a
plethora of potential race conditions we'd really rather avoid.
Unfortunately, both methods of setting the VM and the engine set are in
active use today so we can't simply disallow setting the VM or engine
set vial SET_CONTEXT_PARAM. In order to work around this wart, this
commit adds a proto-context struct which contains all the context create
parameters.
v2 (Daniel Vetter):
- Better commit message
- Use __set/clear_bit instead of set/clear_bit because there's no race
and we don't need the atomics
v3 (Daniel Vetter):
- Use manual bitops and BIT() instead of __set_bit
v4 (Daniel Vetter):
- Add a changelog to the commit message
- Better hyperlinking in docs
- Create the default PPGTT in i915_gem_create_context
v5 (Daniel Vetter):
- Hand-roll the initialization of UCONTEXT_PERSISTENCE
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-17-jason@jlekstrand.net
With the proto-context stuff added later in this series, we end up
having to duplicate set_priority. This lets us avoid duplicating the
validation logic.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-15-jason@jlekstrand.net
As far as I can tell, the only real reason for this is to avoid taking a
reference to the i915_gem_context. The cost of those two atomics
probably pales in comparison to the cost of the ioctl itself so we're
really not buying ourselves anything here. We're about to make context
lookup a tiny bit more complicated, so let's get rid of the one hand-
rolled case.
Some usermode drivers such as our Vulkan driver call GET_RESET_STATS on
every execbuf so the perf here could theoretically be an issue. If this
ever does become a performance issue for any such userspace drivers,
they can use set CONTEXT_PARAM_RECOVERABLE to false and look for -EIO
coming from execbuf to check for hangs instead.
v2 (Daniel Vetter):
- Add a comment in the commit message about recoverable contexts
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-14-jason@jlekstrand.net
This adds a bunch of complexity which the media driver has never
actually used. The media driver does technically bond a balanced engine
to another engine but the balanced engine only has one engine in the
sibling set. This doesn't actually result in a virtual engine.
This functionality was originally added to handle cases where we may
have more than two video engines and media might want to load-balance
their bonded submits by, for instance, submitting to a balanced vcs0-1
as the primary and then vcs2-3 as the secondary. However, no such
hardware has shipped thus far and, if we ever want to enable such
use-cases in the future, we'll use the up-and-coming parallel submit API
which targets GuC submission.
This makes I915_CONTEXT_ENGINES_EXT_BOND a total no-op. We leave the
validation code in place in case we ever decide we want to do something
interesting with the bonding information.
v2 (Jason Ekstrand):
- Don't delete quite as much code.
v3 (Tvrtko Ursulin):
- Add some history to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-10-jason@jlekstrand.net
This has never been used by any userspace except IGT and provides no
real functionality beyond parroting back parameters userspace passed in
as part of context creation or via setparam. If the context is in
legacy mode (where you use I915_EXEC_RENDER and friends), it returns
success with zero data so it's not useful for discovering what engines
are in the context. It's also not a replacement for the recently
removed I915_CONTEXT_CLONE_ENGINES because it doesn't return any of the
balancing or bonding information.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-9-jason@jlekstrand.net
This API is entirely unnecessary and I'd love to get rid of it. If
userspace wants a single timeline across multiple contexts, they can
either use implicit synchronization or a syncobj, both of which existed
at the time this feature landed. The justification given at the time
was that it would help GL drivers which are inherently single-timeline.
However, neither of our GL drivers actually wanted the feature. i965
was already in maintenance mode at the time and iris uses syncobj for
everything.
Unfortunately, as much as I'd love to get rid of it, it is used by the
media driver so we can't do that. We can, however, do the next-best
thing which is to embed a syncobj in the context and do exactly what
we'd expect from userspace internally. This isn't an entirely identical
implementation because it's no longer atomic if userspace races with
itself by calling execbuffer2 twice simultaneously from different
threads. It won't crash in that case; it just doesn't guarantee any
ordering between those two submits. It also means that sync files
exported from different engines on a SINGLE_TIMELINE context will have
different fence contexts. This is visible to userspace if it looks at
the obj_name field of sync_fence_info.
Moving SINGLE_TIMELINE to a syncobj emulation has a couple of technical
advantages beyond mere annoyance. One is that intel_timeline is no
longer an api-visible object and can remain entirely an implementation
detail. This may be advantageous as we make scheduler changes going
forward. Second is that, together with deleting the CLONE_CONTEXT API,
we should now have a 1:1 mapping between intel_context and
intel_timeline which may help us reduce locking.
v2 (Tvrtko Ursulin):
- Update the comment on i915_gem_context::syncobj to mention that it's
an emulation and the possible race if userspace calls execbuffer2
twice on the same context concurrently.
v2 (Jason Ekstrand):
- Wrap the checks for eb.gem_context->syncobj in unlikely()
- Drop the dma_fence reference
- Improved commit message
v3 (Jason Ekstrand):
- Move the dma_fence_put() to before the error exit
v4 (Tvrtko Ursulin):
- Add a comment about fence contexts to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-8-jason@jlekstrand.net
This API allows one context to grab bits out of another context upon
creation. It can be used as a short-cut for setparam(getparam()) for
things like I915_CONTEXT_PARAM_VM. However, it's never been used by any
real userspace. It's used by a few IGT tests and that's it. Since it
doesn't add any real value (most of the stuff you can CLONE you can copy
in other ways), drop it.
There is one thing that this API allows you to clone which you cannot
clone via getparam/setparam: timelines. However, timelines are an
implementation detail of i915 and not really something that needs to be
exposed to userspace. Also, sharing timelines between contexts isn't
obviously useful and supporting it has the potential to complicate i915
internally. It also doesn't add any functionality that the client can't
get in other ways. If a client really wants a shared timeline, they can
use a syncobj and set it as an in and out fence on every submit.
v2 (Jason Ekstrand):
- More detailed commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-7-jason@jlekstrand.net
