- Fix ARR39-C issue with scaled integer addition in rb func
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[What]
This change allows adjustment to the Visual Confirm
height border.
[Why]
Aids debugging and testing
[How]
Use the existing infrastructure to implement logic to
draw borders
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
With eDP DSC enabled and set 4K 60Hz, there would be screen
corruption when booting to OS or enabling the driver.
[HOW]
Avoid powering down VDD when we cannot apply eDP fast boot.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
- Adding a DM interface to enable DSC over eDP on Linux
- DSC over eDP will allow to power savings by reducing
the bandwidth required to support panel's modes
- Apply link optimization algorithm to reduce link bandwidth
when DSC is enabled
[how]
- Read eDP panel's DSC capabilities
- Apply DSC policy on eDP panel based on its DSC capabilities
- Enable DSC encoder's on the pipe
- Enable DSC on panel's side by setting DSC_ENABLE DPCD register
- Adding link optimization algorithm to reduce link rate or lane
count based
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previous LTTPR change has caused a regression that led to an
issue where LTTPR is disabled
[HOW]
Extended changes from previous fix to DCN30X
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In fast boot sequence, when change dispclk, otg is disabled but digfe
is enabled. This may cause dig fifo error.
[How]
Reset dig fifo after enable otg.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DML itself is SW only, putting the logic as part of resource makes it
hw dependent and thus impossible to compile separately from dc.
Separate compilation is critical for unit testing as well as bbox tool
development
[how]
create new dml wrapper.
Copy logic from the validation functions into dml wrapper as base
implementation. Dml wrapper has internal/static implementations
for all helpers, and does not reference other functions.
It may reference dc structures/types for convenience.
This change now has all the changes for DML isolation squashed into
one.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a bug in MSA programming sequence that mistakenly set
MSA vsp/hsp to 1 for positive polarity. This is incorrect.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The previous changes for fixing MPO underflow with multiple
display connected caused a regression where the machine runs
into a hang when doing multiple driver pnp with multiple displays
connected
[HOW]
Reverted offending change
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We're currently flushing commands that had been previously been
flushed or are currently being processed by the DMCUB when we don't
immediately wait for idle after command execution.
[How]
Avoiding reflushing the data by keeping track of the last wptr.
We'll treat this as the actual rptr by creating a copy of the inbox
and modifying the copy's rptr.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to integration issues with branch merging,
a regression happened that prevented secondary
displays from lighting up or enabling certain features
[How]
Separated the new logic to be for DCN31 only and retained
pre DCN31 logic for all other ASICs
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMIO/DOORBELL BOs encode control data and should be pinned in GTT
domain before enabling PCIe connected peer devices in accessing it
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Accounting system to track amount of available memory (system, TTM
and VRAM of a device) relies on BO's domain. The change is to rely
instead on allocation flag indicating BO type - VRAM, GTT, USERPTR,
MMIO or DOORBELL
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Dmesg errors are found on dcn3.1 during reset test, but it's not
a really failure. So reduce it to a debug print.
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
It doesn't make sense to guard DC_LOG_DP2 by CONFIG_DRM_AMD_DCN, and
this also caused build failure for allmodconfig; So drop the guard
to fix the compile failure;
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed
There is a potential memleak if not call kobject_put.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch
already been called, the start_cpsch will not be called since there is no resume in this
case. When reset been triggered again, driver should avoid to do uninitialization again.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support that allow the userspace tool like RGP to get the GFX clock
value at runtime, the fix follow the old way to show the min/current/max
clocks level for compatible consideration.
=== Test ===
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz *
1: 1100Mhz
2: 1600Mhz
then run stress test on one APU system.
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz
1: 1040Mhz *
2: 1600Mhz
The current GFXCLK value is updated at runtime.
BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260
Reviewed-by: Huang Ray <Ray.Huang@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
After commit ("drm/amdgpu/display: add support for multiple backlights")
number of eDPs is defined while registering backlight device.
However the panel's extended caps get updated once before register call.
That leads to regression with extended caps like oled brightness control.
[How]
Update connector ext caps after register_backlight_device
Fixes: 7fd13baeb7 ("drm/amdgpu/display: add support for multiple backlights")
Link: https://www.reddit.com/r/AMDLaptops/comments/qst0fm/after_updating_to_linux_515_my_brightness/
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Samuel Čavoj <samuel@cavoj.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jasdeep Dhillon <Jasdeep.Dhillon@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Print Navi1x fine grained clocks in a consistent manner with other SOCs.
Don't show aritificial DPM level when the current clock equals min or max.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver initialization is driven by IP version from IP
discovery table. So add error print when failing to add
ip block during driver initialization, this will be more
friendly to user to know which IP version is not correct.
[ 40.467361] [drm] host supports REQ_INIT_DATA handshake
[ 40.474076] [drm] add ip block number 0 <nv_common>
[ 40.474090] [drm] add ip block number 1 <gmc_v10_0>
[ 40.474101] [drm] add ip block number 2 <psp>
[ 40.474103] [drm] add ip block number 3 <navi10_ih>
[ 40.474114] [drm] add ip block number 4 <smu>
[ 40.474119] [drm] add ip block number 5 <amdgpu_vkms>
[ 40.474134] [drm] add ip block number 6 <gfx_v10_0>
[ 40.474143] [drm] add ip block number 7 <sdma_v5_2>
[ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init
[ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device.
v2: use dev_err to multi-GPU system
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also print the message index and parameter of the stuck command.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support that allow the userspace tool like RGP to get the GFX clock
value at runtime, the fix follow the old way to show the min/current/max
clocks level for compatible consideration.
=== Test ===
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz *
1: 1100Mhz
2: 1600Mhz
then run stress test on one APU system.
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz
1: 1040Mhz *
2: 1600Mhz
The current GFXCLK value is updated at runtime.
BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260
Reviewed-by: Huang Ray <Ray.Huang@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
asic_family was a duplicate of asic_type, both of type amd_asic_type.
Replace all instances of device_info->asic_family with adev->asic_type
and remove asic_family from device_info.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch to IP version checking instead of asic_type on various KFD
version checks.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Converts KFD switch statements to use IP version checking instead
of asic_type.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Defined as GC HWIP >= IP_VERSION(9, 0, 1).
Also defines KFD_GC_VERSION to return GC HWIP version.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver initialization is driven by IP version from IP
discovery table. So add error print when failing to add
ip block during driver initialization, this will be more
friendly to user to know which IP version is not correct.
[ 40.467361] [drm] host supports REQ_INIT_DATA handshake
[ 40.474076] [drm] add ip block number 0 <nv_common>
[ 40.474090] [drm] add ip block number 1 <gmc_v10_0>
[ 40.474101] [drm] add ip block number 2 <psp>
[ 40.474103] [drm] add ip block number 3 <navi10_ih>
[ 40.474114] [drm] add ip block number 4 <smu>
[ 40.474119] [drm] add ip block number 5 <amdgpu_vkms>
[ 40.474134] [drm] add ip block number 6 <gfx_v10_0>
[ 40.474143] [drm] add ip block number 7 <sdma_v5_2>
[ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init
[ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device.
v2: use dev_err to multi-GPU system
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also print the message index and parameter of the stuck command.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck review:
./drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c:1174:14-18
:Unneeded variable
Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These get funcs simply return an adev field. Replace funcs/calls with
direct field accesses instead.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update developers with next level of info about unsupported
display configuration query that led to atomic check failure.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In DC we want to wait for the INBOX0 HW Lock command to ACK before
continuing. This is to ensure that the lock has been successfully
acquired before programming HW in DC.
[How]
Add interfaces to send messages on INBOX0, poll for their completation
and clear the ack.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Link encoder assignment tracking variables need to be (re)initialised
whenever dc_state is (re)initialised. Otherwise variables used for
dynamic encoder assignment (especially the link encoder availability
pool) are out of sync with dc_state and future encoder assignments are
invalid.
[How]
Initialise encoder assignment variables when creating new dc_state
resource.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Stream ordering and count can vary from one state to the next. Only
checking a subset of entries in the encoder assignment table can lead to
invalid encoder assignments.
[How]
Check all entries in encoder assignment table when querying it.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some panels require to use TPS3 pattern to wake up link in PSR mode.
[How]
To add TPS3 selection information in PSR settings command and pass to
DMUB FW.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improvements to INBOX0 HW Lock
- Add support for sending TPS3 pattern
- Fix Coverity Issues
- Fixes for DMUB
- Fix RGB MPO underflow with multiple displays
- WS fixes and code restructure
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For dpia link, link->hpd_status indicates current state, but driver
fails to capture hpd transitions in certain scenarios such as during
link training.
[How]
Added link->hpd_pending flag that captures arrival of new hpd.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity discovers holes in logic that needs to be addressed for
improved code integrity.
[How]
Address issues found by coverity without changing the actual logic.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
At every reference to stream pointer, we need to increment/decrement the
kref_count. Not doing so will result in invalid stream pointer still
alive after hibernate cycle.
[how]
Call stream retain/release whenever the link encoder assignment is set
to true/false since it indicates if we want to reference the stream
pointer or not.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link encoder assignment leaves the old stream data when it was
unassigned. When the clear encoder assignment is called, it based on the
old stale data to access the de-allocated stream.
[How]
There should be no need to explicitly clean up the link encoder
assignment if the unassign loop does the work properly, the loop should
base on the current state to clean up the assignment.
Also, the unassignment should better clean up the values in the
assignement slots as well.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
According to eDP spec, DPCD 1.3 is only for eDP DPCD v1.4
In dpcd_set_link_settings function, the driver is just above v1.3
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: ChiawenHuang <chiawen.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
reduce az indirect register dump. need add az clock_gating control field
used in some project.
[how]
conditional output indrect register in the log. add clock_gating feild
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A built firmware binary may be aligned to 16-bytes with padding at the
end as necessary. In the case that padding was applied the meta info
will not be detected correctly and we won't be able to allocate the
appropriate firmware and tracebuffer sizes.
[How]
To maintain compatibility with already released firmware where this
occurs we need to try every meta offset from 0..15 inclusive.
Extract out the meta info checker into a helper function that's called
for each of these offsets and exit early when we've found it.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link_enc_cfg API operates in one of two modes depending on the stage
of application of dc_state to hardware. The API is the safest way to
query link encoder assignments.
[How]
Use results of link encoder assignment query using link_enc_cfg API.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
With RGB MPO enabled, playing a video with multiple displays connected
results in underflow when closing the video window
[HOW]
Reverted the old change to fix this problem, which prevented pipe splits
for multiple display configurations and caused high MCLK speeds during
idle. Added a two step call to dc_update_planes_and_stream, first time
with pipe split disabled and the second time with pipe split enabled,
which fixed the underflow issue
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
matching the dmcub_support with all other dcn version.
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
PSR set power command wasn't setting panel instance
and command version which caused both streams
to overwrite the same PSR state.
[how]
Pass panel instance to the set power command function
and to DMUB and set command version enum
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
1. The code to blank all dp display have been called many times,
so add helpers in dc_link to make it more concise.
2. Add some check to fix the dmesg errors at boot and resume from S3
on dcn3.1 during DQE's promotion test.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the variables named is_end_of_payload and hpd_status are already
bool type, the ?: conditional operator is unnecessary any more.
Clean them up here.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We set WC memtype for aper_base but don't check return value
of arch_io_reserve_memtype_wc(). Be more defensive and return
early on error.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ttm_backend_bind() only needed for TTM_PL_TT
and AMDGPU_PL_PREEMPT.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These bits are de-facto part of the uAPI, so declare them in a uAPI header.
The corresponding bit-fields and enums in user mode are defined in
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/blob/master/include/hsakmttypes.h
HSA_CAP_... -> HSA_CAPABILITY
HSA_MEM_HEAP_TYPE_... -> HSA_HEAPTYPE
HSA_MEM_FLAGS_... -> HSA_MEMORYPROPERTY
HSA_CACHE_TYPE_... -> HsaCacheType
HSA_IOLINK_TYPE_... -> HSA_IOLINKTYPE
HSA_IOLINK_FLAGS_... -> HSA_LINKPROPERTY
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the shadow buffer support from generic framebuffer emulation, it's
possible now to have runpm kicked when no update for console.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Completes removal of kgd_dev. Direct references to amdgpu_device objects
should now be used instead.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove get_amdgpu_device and other remaining kgd_dev references aside
from declaration/kfd struct entry and initialization.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v10_3.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v10.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v9.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v8.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static funcs in amdgpu_amdkfd_gfx_v7.c now using amdgpu_device.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Patch series to remove kgd_dev struct and replace all instances with
amdgpu_device objects.
amdgpu_device needs to be declared in kgd_kfd_interface.h to be visible
to kfd2kgd_calls.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
panels:
- add some new panels
fbdev:
- fix double-free
- remove unused scrolling acceleration
- CONFIG_FB dep improvements
locking:
- improve contended locking logging
- naming collision fix
dma-buf:
- add dma_resv_for_each_fence iterator
- fix fence refcounting bug
- name locking fixesA
prime:
- fix object references during mmap
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix
-----BEGIN PGP SIGNATURE-----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=qMNk
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"I missed a drm-misc-next pull for the main pull last week. It wasn't
that major and isn't the bulk of this at all. This has a bunch of
fixes all over, a lot for amdgpu and i915.
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
panels:
- add some new panels
fbdev:
- fix double-free
- remove unused scrolling acceleration
- CONFIG_FB dep improvements
locking:
- improve contended locking logging
- naming collision fix
dma-buf:
- add dma_resv_for_each_fence iterator
- fix fence refcounting bug
- name locking fixesA
prime:
- fix object references during mmap
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix"
* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
drm/ttm: Double check mem_type of BO while eviction
drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
drm/amdgpu: drop jpeg IP initialization in SRIOV case
drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
drm/amd/display: Don't lock connection_mutex for DMUB HPD
drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
drm/amdkfd: Fix retry fault drain race conditions
drm/amdkfd: lower the VAs base offset to 8KB
drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
drm/i915/fb: Fix rounding error in subsampled plane size calculation
drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
drm/locking: fix __stack_depot_* name conflict
drm/virtio: Fix NULL dereference error in virtio_gpu_poll
drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
drm/amd/amdkfd: Don't sent command to HWS on kfd reset
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF/AjYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1hkIAJ6sFDbvb4M4LMwf
Slh2NVL9o5sLMBDzVwnVlyMSKDbMn1WBKreGssaLgZjGDc74lxsdSmw5l9MZm0JN
xlq95Q6XFiuu+0qDHPWwfDz3JFO4TqW2ZLLPWk9NnkNbRXqccSrlVRi1RpgE1t3/
NUtS8CQLu6A2BYMc6mkk3aV6IwSNKOkWbM5eBHSvU4j8B6lLbNQop0AfO/wyY1xB
U6LiVE1RpN/b7Yv+75ITtNzuHzVIBx6305FvSnOlKbMKKvIClt96Vd2OeuoEkK+6
wGU8JraB1+fc0GckAhynNrjWQWdvi0MAhFWWEJxjS20OGcV1rXDduNfkVNauO1Zn
+dNyJ3s=
=g9fz
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15' into drm-next
I got a drm-fixes which had some 5.15 stuff in it, so to avoid
the mess just backmerge here.
Linux 5.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
MIGRATE_PFN_LOCKED is used to indicate to migrate_vma_prepare() that a
source page was already locked during migrate_vma_collect(). If it
wasn't then the a second attempt is made to lock the page. However if
the first attempt failed it's unlikely a second attempt will succeed,
and the retry adds complexity. So clean this up by removing the retry
and MIGRATE_PFN_LOCKED flag.
Destination pages are also meant to have the MIGRATE_PFN_LOCKED flag
set, but nothing actually checks that.
Link: https://lkml.kernel.org/r/20211025041608.289017-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fix for udl, CONFIG_FB dependency improvements, a fix for a circular
locking depency in imx, a NULL pointer dereference fix for virtio, and a
naming collision fix for drm/locking.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYYuA2wAKCRDj7w1vZxhR
xQdZAP4oqiWpCO1JfnZdvEJ/lOULqvdzYkbUZexshGLdbb4ECwEA83TzIbQvXP8p
jsC1hPNAIsOBkQ+nGZwJkTOtDcpEAQ4=
=N2pK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2021-11-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Removed the TTM Huge Page functionnality to address a crash, a timeout
fix for udl, CONFIG_FB dependency improvements, a fix for a circular
locking depency in imx, a NULL pointer dereference fix for virtio, and a
naming collision fix for drm/locking.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110082114.vfpkpnecwdfg27lk@gilmour
Fixes: 96b8dd4423 ("drm/amdgpu/amdgpu_vcn: convert to IP version checking")
Signed-off-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: b05b9c591f ("drm/amdgpu: clean up set IP function")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Video plane gets rejected for non-zero src_y and src_x on DCN2.x.
[How]
Limit the rejection till DCN1.x and verified MPO, by dragging video
playback beyond display's left (0, 0) co-ordinates.
Fixes: d89f6048bd ("drm/amd/display: Reject non-zero src_y and src_x for video planes")
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need HPD IRQ notifications (RX, short pulse) to properly handle
DP MST for DPIA connections.
[How]
A null pointer exception currently occurs when these are received
so add a check to validate that we have a handler installed for
the notification.
Extend the HPD handler to also handle HPD IRQ (RX) since the logic is
the same.
Fixes: e27c41d5b0 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Jude Shih <shenshih@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Per DRM spec we only need to hold that lock when touching
connector->state - which we do not do in that handler.
Taking this locking introduces unnecessary dependencies with other
threads which is bad for performance and opens up the potential for
a deadlock since there are multiple locks being held at once.
[How]
Remove the connection_mutex lock/unlock routine and just iterate over
the drm connectors normally. The iter helpers implicitly lock the
connection list so this is safe to do.
DC link access also does not need to be guarded since the link
table is static at creation - we don't dynamically add or remove links,
just streams.
Fixes: e27c41d5b0 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Jude Shih <shenshih@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trivial patch which adds a comment for macro
endif's in amdgpu_dm.c
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The check for whether to drain retry faults must be under the mmap write
lock to serialize with munmap notifier callbacks.
We were also missing checks on child ranges. To fix that, simplify the
logic by using a flag rather than checking on each prange. That also
allows draining less freqeuntly when many ranges are unmapped at once.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Alex Sierra <Alex.Sierra@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The low 16MB of virtual address space are currently reserved for kernel
mode allocations mapped into user virtual address space. This causes
conflicts with HMM/SVM mappings at low virtual addresses. We tried to
move those kernel mode allocations to the upper half of the 64-bit
virtual address space for GFX9, which is naturally reserved for kernel
use. However, TBA (trap handler code) has problems to access addresses
in the high virtual space. We have decided to set this to 8KB of the
lower address space as a temporary fix, while investigate TBA address
problem. It is very unlikely for user space to map memory at this low
region.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
make action upon failure in "drm_atomic_add_affected_connectors()"
consistent with the rest of failures in amdgpu_dm_atomic_check().
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD pre_reset should be called before reset been executed, it will
hold the lock to prevent other rocm process to sent the packlage to hiq
during host execute the real reset on the HW
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There was a change(below) target for such issue:
d82e2c249c ("drm/amdgpu: Fix crash on device remove/driver unload")
But the fix for VI ASICs was missing there. This is a supplement for
that.
Fixes: d82e2c249c ("drm/amdgpu: Fix crash on device remove/driver unload")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle SI DC support when CONFIG_DRM_AMD_DC_SI is not
set.
Fixes: f7f12b2582 ("drm/amdgpu: default to true in amdgpu_device_asic_has_dc_support")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a kfd_bo was shared (e.g. a dmabuf export), the original kfd_bo may be
freed when the amdgpu_bo still lives on. Free the kfd_bo struct in the
release_notify callback then the amdgpu_bo is freed.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-By: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When kfd need to be reset, sent command to HWS might cause hang and get unnecessary timeout.
This change try not to touch HW in pre_reset and keep queues to be in the evicted state
when the reset is done, so they are not put back on the runlist. These queues will be destroied
on process termination.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of the ib padding process, accessing the RLC_SPM_* register may
trigger gfx hang. Since gfxoff may be already kicked during the whole period.
To address that, we manually toggle gfx on/off around the RLC_SPM_*
register access.
This can resolve the gfx hang issue observed on running Talos with RDP launched
in parallel.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error count reset for xgmi3x16 pcs is missed.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously there was a check based on chip # for chips that aligned to
>=CHIP_NAVI10 to have RLC stopped as part of DPMS check. This was because
of gfxclk being controlled by RLC in the newer designs.
As part of IP version checking though, this got changed to match IP
version for SMU. Because Renoir designs also include smu11 that meant
that even GFX9 started to stop RLC earlier.
Adjust to match GFX IP version instead of SMU IP version to restore the
previous behavior.
Fixes: a8967967f6 ("drm/amdgpu/amdgpu_smu: convert to IP version checking")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
csb bo is not unpinned in gfx 9. It will lead to pin_count leak on
driver unload.
[How]
Call bo_free_kernel corresponding to bo_create_kernel in
gfx_rlc_init_csb. This will also unify the code path with other gfx
versions.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For Vega10, disabling gart of gfxhub could mess up KIQ and PSP
under sriov mode, and lead to DMAR on host side.
[How]
Skip writing GMC registers under sriov.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sysfs_emit and sysfs_emit_at requrie a page boundary
aligned buf address. Make them happy!
v2: fix sysfs_emit -> sysfs_emit_at missed conversions
Cc: Lang Yu <lang.yu@amd.com>
Cc: Darren Powell <darren.powell@amd.com>
Fixes: 6db0c87a0a ("amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1774
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BOs need to be reserved before they are added or removed, so ensure that
they are reserved during kfd_mem_attach and kfd_mem_detach
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]:
When we call hmm_range_fault to map memory after a migration, we don't
expect memory to be migrated again as a result of hmm_range_fault. The
driver ensures that all memory is in GPU-accessible locations so that
no migration should be needed. However, there is one corner case where
hmm_range_fault can unexpectedly cause a migration from DEVICE_PRIVATE
back to system memory due to a write-fault when a system memory page in
the same range was mapped read-only (e.g. COW). Ranges with individual
pages in different locations are usually the result of failed page
migrations (e.g. page lock contention). The unexpected migration back
to system memory causes a deadlock from recursive locking in our
driver.
[How]:
Creating a task reference new member under svm_range_list struct.
Setting this with "current" reference, right before the hmm_range_fault
is called. This member is checked against "current" reference at
svm_migrate_to_ram callback function. If equal, the migration will be
ignored.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no reason to allow for partial buffers from userspace in our
debugfs. In this particular case callers will zero out the wr_buf but if
callers in the future don't do that we might be looking at corrupt data.
Linus puts it better than I can in
https://lkml.org/lkml/2021/10/26/993
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The huge page functionality in TTM does not work safely because PUD and
PMD entries do not have a special bit.
get_user_pages_fast() considers any page that passed pmd_huge() as
usable:
if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) ||
pmd_devmap(pmd))) {
And vmf_insert_pfn_pmd_prot() unconditionally sets
entry = pmd_mkhuge(pfn_t_pmd(pfn, prot));
eg on x86 the page will be _PAGE_PRESENT | PAGE_PSE.
As such gup_huge_pmd() will try to deref a struct page:
head = try_grab_compound_head(pmd_page(orig), refs, flags);
and thus crash.
Thomas further notices that the drivers are not expecting the struct page
to be used by anything - in particular the refcount incr above will cause
them to malfunction.
Thus everything about this is not able to fully work correctly considering
GUP_fast. Delete it entirely. It can return someday along with a proper
PMD/PUD_SPECIAL bit in the page table itself to gate GUP_fast.
Fixes: 314b6580ad ("drm/ttm, drm/vmwgfx: Support huge TTM pagefaults")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Thomas Hellström <thomas.helllstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Update subject per Thomas' &Christian's review]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/0-v2-a44694790652+4ac-ttm_pmd_jgg@nvidia.com
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
[Why & How]
In order to have dc_enable_dmub_notifications() more precise, add
one more condition to check if dc->debug.dpia_debug.bits.disable_dpia
is false.
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During Z10, root clock gating and memory low power registers needs to
to be restored if optimization is enabled in driver.
[How]
Added new DMUB boot option for root clock gating and memory low power.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The MPC memory clocks should be powered down when not in use.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPO is only used for DP2.0. HPO HW control should be
disable when not being used to save power.
[How]
Shutdown HPO HW control during init hw.
Shutdown HPO HW control during stream disable.
Enable HPO HW control during stream enable if DP2.0.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
write LINK_SQUARE_PATTERN_num + 1 for square pulse pattern.
Specs requirement to write this register prior to write LINK_QUAL_LANEX_SET.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
State can be cleared without removing individual streams (by
calling dc_remove_stream_from_ctx()). This can leave the
encoder assignment module in an incoherent state and cause
future assignments to be incorrect.
[How]
Clear encoder assignments when committing 0 streams or
re-initializing hardware.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In scenario when 1 display connected with pipe split (2 pipes in use)
and 3 new displays simultaneously hotplugged via MST hub (4 pipes in use),
mpcc may get reprogram to other vtg, remaining busy.
In this case waiting for mpcc idle timeouts with error like this:
[drm] REG_WAIT timeout 1us * 100000 tries - mpc2_assert_idle_mpcc
RIP: 0010:mpc2_assert_mpcc_idle_before_connect
Call Trace:
dcn20_update_mpcc
dcn20_program_front_end_for_ctx
dc_commit_state
amdgpu_dm_atomic_commit_tail
...
[How]
Add pipe split change condition to disable dangling plane.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MST monitor sends link loss short pulse continuous but sink is
occupy by HDMI input to lead link training fail.
[How]
disable link once retraining fail.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Yu-ting Shen <yu-tshen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It was found that the system would hang on a dummy pstate when playing
4k60 videos on a 1080p 390Hz monitor.
[HOW]
Properly select the dummy_pstate_latency_ms when firmware assisted
memory clock switching is enabled instead of assuming that the highest
latency would work for every monitor timing.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Felipe Clark <felclark@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix spacing issue for the format string.
Addresses-Coverity-ID: 1446765: ("Invalid printf format string")
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If timing and bpp of displays on mst hub are not changed,
pbn, slot_num for displays should not be changed. Linux
user mode may initiate atomic_check with different display
configuration after set mode finished. This will call to
amdgpu_dm to re-compute payload, slot_num of displays and
saved to dm_connect_state. stream->timing.flags.dsc, pbn,
slot_num are updated to values which may be different from
that were used for set mode. when dsc hub with 3 4k@60hz dp
connected, 3 dsc engines are enabled. timing.flags.dsc = 1.
timing.flags.dsc are changed to 0 due to atomic check. when
dsc hub is unplugged, amdgpu driver check timing.flags.dsc
for last mode set and find out flags.dsc = 0, then does not
disable dsc.
[HOW]
check status of displays on dsc mst hubs. re-compute pbn,
slot_num, timing.flags.dsc only if there is mode, connect
or enable/disable change.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplicated kfd_resume_iommu which already runs
in mdgpu_amdkfd_device_init.
Tested-By: Ken Moffat <zarniwhoop@ntlworld.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For yellow carp, the desired CGPG hysteresis value is 0x4E20.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 652de07add ("drm/amd/display: Fully switch to dmub for all dcn21
asics") switched over to using dmub on Renoir to fix Gitlab 1735, but this
implied a new dependency on newer firmware which might not be met on older
kernel versions.
Since sw_init runs before hw_init, there is an opportunity to determine
whether or not the firmware version is new to adjust the behavior.
Cc: Roman.Li@amd.com
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1772
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Fixes: 652de07add ("drm/amd/display: Fully switch to dmub for all dcn21 asics")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ASICs not supporting power profile mode, don't show the attribute.
Verify that the function has been implemented by the subsystem.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This better aligns that the caller can make a mistake with the buffer
and -EINVAL should be returned, but if the hardware doesn't support
the feature it should be -EOPNOTSUPP.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prevent possible issues from set and get being called simultaneously.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was added by commit bd8dcea93a ("drm/amd/pm: add callbacks to
read/write sysfs file pp_power_profile_mode") but the feature was
deprecated from PMFW. Remove it from the driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously Renoir compiler gfx target version was forced to Raven.
Update driver side for completeness.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is more useful when talking to the SMU team to have the information
in this format, save one less step to manually do it.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If some pages fail to migrate to system memory, don't update
prange->actual_loc = 0. This prevents endless CPU page faults after
partial migration failures due to contested page locks.
Migration to RAM must be complete during migrations from VRAM to VRAM and
during evictions. Implement retry and fail if the migration to RAM fails.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stack and heap pages tend to be shared by many small allocations.
Concurrent access by CPU and GPU is therefore likely, which can lead to
thrashing. Avoid this by setting the preferred location to system memory.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The preferred location should be used as the migration destination
whenever it is accessible by the faulting GPU. System memory is always
accessible. Peer memory is accessible if it's in the same XGMI hive.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran has different register mask definitions for
regiter MC_VM_XGMI_LFB_CNTL. Use the correct masks
to interpret fields of this register.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In advance tdr mode, the real bad job will be resubmitted twice, while
in drm_sched_resubmit_jobs_ext, there's a dma_fence_put, so the bad job
is put one more time than other jobs.
[How]
Adding dma_fence_get before resbumit job in
amdgpu_device_recheck_guilty_jobs and put the fence for normal jobs
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB
-----BEGIN PGP SIGNATURE-----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=jdhH
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Summary below. i915 starts to add support for DG2 GPUs, enables DG1
and ADL-S support by default, lots of work to enable DisplayPort 2.0
across drivers. Lots of documentation updates and fixes across the
board.
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB"
* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
drm/amd/display: MST support for DPIA
drm/amdgpu: Fix even more out of bound writes from debugfs
drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
drm/amdgpu/UAPI: rearrange header to better align related items
drm/amd/display: Enable dpia in dmub only for DCN31 B0
drm/amd/display: Fix USB4 hot plug crash issue
drm/amd/display: Fix deadlock when falling back to v2 from v3
drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
drm/amd/display: move FPU associated DCN301 code to DML folder
drm/amd/display: fix link training regression for 1 or 2 lane
drm/amd/display: add two lane settings training options
drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
drm/amd/display: implement decide lane settings
drm/amd/display: adopt DP2.0 LT SCR revision 8
drm/amd/display: FEC configuration for dpia links in MST mode
drm/amd/display: FEC configuration for dpia links
drm/amd/display: Add workaround flag for EDID read on certain docks
drm/amd/display: Set phy_mux_sel bit in dmub scratch register
...
When updating a single connector, use
drm_kms_helper_connector_hotplug_event instead of
drm_kms_helper_hotplug_event.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-5-contact@emersion.fr
by confidential computing solutions to query different aspects of the
system. The intent behind it is to unify testing of such aspects instead
of having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess.
-----BEGIN PGP SIGNATURE-----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=Na0U
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic confidential computing updates from Borislav Petkov:
"Add an interface called cc_platform_has() which is supposed to be used
by confidential computing solutions to query different aspects of the
system.
The intent behind it is to unify testing of such aspects instead of
having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess"
* tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Replace the use of mem_encrypt_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_es_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_active() with cc_platform_has()
x86/sme: Replace occurrences of sme_active() with cc_platform_has()
powerpc/pseries/svm: Add a powerpc version of cc_platform_has()
x86/sev: Add an x86 version of cc_platform_has()
arch/cc: Introduce a function to check for confidential computing features
x86/ioremap: Selectively build arch override encryption functions
The DMA mask on SI parts is 40 bits not 44. Copy
paste typo.
Fixes: 244511f386 ("drm/amdgpu: simplify and cleanup setting the dma mask")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1762
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
- DPIA MST slot registers are not programmed during payload
allocation and hence MST does not work with DPIA.
- HPD RX interrupts are not handled for DPIA.
[How]
- Added inbox command to program the MST slots whenever
payload allocation happens for DPIA links.
- Added support for handling HPD RX interrupts
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CVE-2021-42327 was fixed by:
commit f23750b5b3
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date: Wed Oct 13 16:04:13 2021 -0400
drm/amdgpu: fix out of bounds write
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland)
Fixes: 918698d5c2 ("drm/amd/display: Return the number of bytes parsed than allocated")
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add secondary instance version info for soc15 parts.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add secondary instance version info for vega20, arcturure, and
aldebaran.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMUB binary is common for both A0 and B0. Hence, driver should
notify FW about the support for DPIA in B0.
[How]
Added dpia_supported bit in dmub_fw_boot_options and will be set
only for B0.
Assign dpia_supported to true before dm_dmub_hw_init
in B0 case.
v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex)
Signed-off-by: Jude Shih <shenshih@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Notify data from outbox corrupt, the notify type should be 2 (HPD) instead of 0
(No data). We copied the address instead of the value. The memory might be
freed in the end of outbox IRQ
[How]
We should allocate the memory of notify and copy the whole content from outbox to
hpd handle function
Fixes: 88f52b1fff ("drm/amd/display: Support for SET_CONFIG processing with DMUB")
Signed-off-by: Jude Shih <shenshih@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A deadlock in the kernel occurs when we fallback from the V3 to V2
add_topology_to_display or remove_topology_to_display because they
both try to acquire the dtm_mutex but recursive locking isn't
supported on mutex_lock().
[How]
Make the mutex_lock/unlock more fine grained and move them up such that
they're only required for the psp invocation itself.
Fixes: bf62221e9d ("drm/amd/display: Add DCN3.1 HDCP support")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On certain configs, SMU clock table voltages don't match which cause parser
to behave incorrectly by leaving dcfclk and socclk table entries unpopulated.
[HOW]
Currently the function that finds the corresponding clock for a given voltage
only checks for exact voltage level matches. In the case that no match gets
found, parser now falls back to searching for the max clock which meets the
requested voltage (i.e. its corresponding voltage is below requested).
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN301 to DML, where all FPU code
should locate.
Cc: Christian König <christian.koenig@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We have a regression that cause maximize lane settings to use
uninitialized data from unused lanes.
This will cause link training to fail for 1 or 2 lanes because the lane
adjust is populated incorrectly sometimes.
v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex)
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
option 1: disallow different lanes to have different lane settings
option 2: dpcd lane settings will always use the same hw lane settings
even if it doesn't match requested lane adjust
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
As DP features expands, we have encountered many situations where we
must configure a different DPCD lane setting from hw lane settings we
output. The change is to decouple hw lane settings from dpcd lane
settings to provide flexibility to configure dpcd and hw individually.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Decouple lane settings decision logic all to its own function. The
function takes in lane adjust array and link training settings and
decide what hw lane setting and dpcd lane setting should be used.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
revision 8 SCR requires DP Source to write TPS2 and FFE lane adjustment
in one 5 byte write aux transaction.
It specifies to read aux rd interval value as soon as we turn on TPS1
pattern.
Cc: Wayne Lin <wayne.lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To fix the check condition for fec enable for dpia links in MST mode.
[How]
dc_link_should_enable_fec() to be used to check whether fec should be
enabled in MST mode.
Cc: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To fix the check condition for fec enable for dpia links.
[How]
dc_link_should_enable_fec() to be used to check whether fec should be
enabled.
Cc: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain docks appear to NAK I2C writes to the segment pointer with the
MOT (middle of transaction) bit clear. This behaviour can cause EDID
reads from higher segments to fail.
[How]
Add workaround flag for links which connect to docks exhibiting this
issue.
Cc: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
B0 has pipe mux for DIGC and DIGD which can be connected to PHYF/PHYG or
PHYC/PHY D.
[How]
Based on chip internal hardware revision id determine it is B0 and set
DMUB scratch register so DMUBFW can connect the display pipe is
connected correctly to the dig.
Cc: Wayne Lin <wayne.lin@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
DCN303's 4 channel SOC BB causes problems at strobe
how:
workaround to manually adjust strobe calculation using FCLK
restrict.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new DC version brings improvements in the following areas:
- Improvements for USB4;
- Isolate FPU code for DCN20, DCN301, and DSC;
- Fixes on Linking training;
- Refactoring some parts of the code, such as PSR;
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change adds a config flag to allow non fullscreen MPO during ODM.
Scaling calculation will still fail configurations where video is only
one one side of the screen.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
For audio packet type 0x02, there are 2 Layouts:
Layout = 0 for 2 channels
and Layout = 1 for > 2 channels.
Layout will affect bandwidth check.
Currently, for HDMI FRL, Layout field isn't set and has a default value
of 0, so theoretically only 2-channel audio for audio packet type 0x02
is supported now.
How:
1. Set Layout properly according to maximum audio channel numbers for
audios with audio packet type 0x02.
2. 8ch LPCM audio is not supported for timing modes with v_active <= 576.
Reviewed-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We found a compilation error that we thought was caused by the 3DLUT
patch; later on, we figured out the root cause of the problem, but we
already applied the revert in the wrong patch. This commit brings it
back the 3DLUT fix.
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add flag to control root clock gating in init_hw
- Add flag to indicate a diags environment is being used
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When writing long AUX commands some sinks will respond will write status
update requiring source to read status.
[How]
When a write request is replied with data (AUX_ACK_M), retry a read of
write status to determine when the write is completed.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently the naming of preferred_training_settings is ambiguous and has
caused confusion regarding its purpose and usage.
[How]
Add comment to clarify the intention.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently there are use cases that require DP link to maintain fixed VS
and PE in HW regardless of what the sink requests. BIOS integrated info
table will specify whether we need to use the fixed drive settings, and
the drive settings to use.
[How]
Implement changes to parse the integrated info table and set the fixed
drive settings accordingly.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is unnecessary in clk_mgr
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Every other CM LUT power down sequence is deferred to next vupdate as
memory powerdown updates immediately while selecting LUTs is double
buffered. Previous update to defer LUT power down missed GAMCOR and
DSCL, causing some visible flicker when entering/exiting fullscreen
video playback.
[HOW]
Update dpp deferred update loop to check for valid DPPs in res_pool
instead of referencing dcn_ip which turns out to not be populated during
runtime. Move GAMCOR and DSCL powerdown to dpp deferred updates.
Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
i2c memory doesn't get set to light sleep on hw init as intended
[HOW]
Set i2c to light sleep after reg gets zeroed, ensuring memory power
control doesn't get disabled for any other DIO memory
Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Crash when USB4 is connected.
[How]
Added an ASIC specific code guard.
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate code that uses
FPU in DSC to DML, where all FPU code should locate.
This change does not refactor any functions but move code around.
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Created new fields that matches new B0 structs On DCN31 the mapping of
DIO output to PHY differs from A0 to B0 boards with new PHY C20 & this
new mapping needed to be handled.
[How]
Mapped new structure based on new structs Added logic for mapping over
A0 and B0 boards Hooked all new structs together.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To expose new power optimization flags to PSR interface. It allows the
PSR related power features can be enabled separately base on different
use scenarios.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updating certain variable blanking calculations to use ceiling function.
Reviewed-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit when FPU is enabled to only functions that does FPU operations for
dcn20_resource_construct, which gets called during driver
initialization.
Enabling FPU operation disables preemption. Sleeping functions(mutex
(un)lock, memory allocation using GFP_KERNEL, etc.) should not be called
when preemption is disabled.
Fixes the following case caught by enabling
CONFIG_DEBUG_ATOMIC_SLEEP in kernel config
[ 1.338434] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[ 1.347395] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 197, name: systemd-udevd
[ 1.356356] CPU: 7 PID: 197 Comm: systemd-udevd Not tainted 5.13.0+ #3
[ 1.356358] Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021
[ 1.356360] Call Trace:
[ 1.356361] dump_stack+0x6b/0x86
[ 1.356366] ___might_sleep.cold+0x87/0x98
[ 1.356370] __might_sleep+0x4b/0x80
[ 1.356372] mutex_lock+0x21/0x50
[ 1.356376] smu_get_uclk_dpm_states+0x3f/0x80 [amdgpu]
[ 1.356538] pp_nv_get_uclk_dpm_states+0x35/0x50 [amdgpu]
[ 1.356711] init_soc_bounding_box+0xf9/0x210 [amdgpu]
[ 1.356892] ? create_object+0x20d/0x340
[ 1.356897] ? dcn20_resource_construct+0x46f/0xd30 [amdgpu]
[ 1.357077] dcn20_resource_construct+0x4b1/0xd30 [amdgpu]
...
Tested on: 5700XT (NAVI10 0x1002:0x731F 0x1DA2:0xE410 0xC1)
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the vbios config and driver config are different, if we update
clock to lower before call program_timing and program_pixel_clk, garbage
appear.
[How]
Align bw context with hw config when system resume
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For asics without a callback, use the current level rather than 0xff.
This can avoid an unnecesary forced level set on older asics when
set by the user.
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stutter mode is a power saving feature on GPUs, however at
least one early raven system exhibits stability issues with
it. Add a quirk to disable it for that system.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214417
Fixes: 005440066f ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove GPRs init for ALDEBARAN in gpu reset temporarily, will add the init once the
algorithm is stable.
v2: Only remove GPRs init in gpu reset.
v3: Suspend needs it, only skip it in gpu reset.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Actually, cu_mask has been copied to mqd memory and
does't have to persist in queue_properties. Remove it
from queue_properties.
And use struct mqd_update_info to store such properties,
then pass it to update queue operation.
v2:
* Rename pqm_update_queue to pqm_update_queue_properties.
* Rename struct queue_update_info to struct mqd_update_info.
* Rename pqm_set_cu_mask to pqm_update_mqd.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, queue is updated with data in queue_properties.
And all allocated resource in queue_properties will not
be freed until the queue is destroyed.
But some properties(e.g., cu mask) bring some memory
management headaches(e.g., memory leak) and make code
complex. Actually they have been copied to mqd and
don't have to persist in queue_properties.
Add an argument into update queue to pass such properties,
then we can remove them from queue_properties.
v2: Don't use void *.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip GPRs init in specific condition since current GPRs init algorithm only works for some CU settings.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TA version should only be displayed in firmware version column.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_fence_driver_sw_fini() should be executed before
amdgpu_device_ip_fini(), otherwise fence driver resource
won't be properly freed as adev->rings have been tore down.
Fixes: 72c8c97b15 ("drm/amdgpu: Split amdgpu_device_fini into early and late")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, all kfd BOs use same destruction routine. But pinned
BOs are not unpinned properly. Separate them from general routine.
v2 (Felix):
Add safeguard to prevent user space from freeing signal BO.
Kunmap signal BO in the event of setting event page error.
Just kunmap signal BO to avoid duplicating the code.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The userptr can be unmapped by application and still registered to
driver, restore userptr work return user pages will get -EFAULT bad
address error. Pretend this error as succeed. GPU access this userptr
will have VM fault later, it is better than application soft hangs with
stalled user mode queues.
v2: squash in warning fix (Alex)
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a GPU hits the bad_page_threshold, it will not be initialized by
the amdgpu driver. This means that the table cannot be cleared, nor can
information gathering be performed (getting serial number, BDF, etc).
If the bad_page_threshold kernel parameter is set to -2,
continue to initialize the GPU, while printing a warning to dmesg that
this action has been done
v2: squash in Luben's fix to restore RAS info reporting
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dmesg doesn't warn when the number of bad pages approaches the
threshold for page retirement. WARN when the number of bad pages
is at 90% or greater for easier checks and planning, instead of waiting
until the GPU is full of bad pages.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Why]
A deadlock in the kernel occurs when we fallback from the V3 to V2
add_topology_to_display or remove_topology_to_display because they
both try to acquire the dtm_mutex but recursive locking isn't
supported on mutex_lock().
[How]
Make the mutex_lock/unlock more fine grained and move them up such that
they're only required for the psp invocation itself.
Fixes: bf62221e9d ("drm/amd/display: Add DCN3.1 HDCP support")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[WHY]
On certain configs, SMU clock table voltages don't match which cause parser
to behave incorrectly by leaving dcfclk and socclk table entries unpopulated.
[HOW]
Currently the function that finds the corresponding clock for a given voltage
only checks for exact voltage level matches. In the case that no match gets
found, parser now falls back to searching for the max clock which meets the
requested voltage (i.e. its corresponding voltage is below requested).
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
CVE-2021-42327 was fixed by:
commit f23750b5b3
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date: Wed Oct 13 16:04:13 2021 -0400
drm/amdgpu: fix out of bounds write
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland)
Fixes: 918698d5c2 ("drm/amd/display: Return the number of bytes parsed than allocated")
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
UAPI Changes:
Nope!
Cross-subsystem Changes:
drm_dp_update_payload_part1() takes a new argument for specifying what the
VCPI slot start is
Core Changes:
Make the DP MST helpers aware of the current starting VCPI slot/VCPI total
slot count...
Driver Changes:
...and then add support for taking advantage of this for 128b/132b links on DP
2.0 for amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf8e724cc0c8803d58a8d730fd6883c991376a76.camel@redhat.com
Need to guard some things with CONFIG_DRM_AMD_DC_DCN.
Fixes: 41724ea273 ("drm/amd/display: Add DP 2.0 MST DM Support")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027223914.1776061-1-alexander.deucher@amd.com
[Why]
Add DP2 MST and debugfs support
[How]
Update the slot info based on the link encoding format
Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-5-lyude@redhat.com
[Why]
configure/call DC interface for DP2 mst support. This is needed to make DP2
mst work.
[How]
- add encoding type, logging, mst update/reduce payload functions
Use the link encoding to determine the DP type (1.4 or 2.0) and add a
flag to dc_stream_update to determine whether to increase/reduce
payloads.
v2:
* add DP_UNKNOWN_ENCODING handling
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-4-lyude@redhat.com
8b/10b encoding format requires to reserve the first slot for
recording metadata. Real data transmission starts from the second slot,
with a total of available 63 slots available.
In 128b/132b encoding format, metadata is transmitted separately
in LLCP packet before MTP. Real data transmission starts from
the first slot, with a total of 64 slots available.
v2:
* Move total/start slots to mst_state, and copy it to mst_mgr in
atomic_check
v3:
* Only keep the slot info on the mst_state
* add a start_slot parameter to the payload function, to facilitate non
atomic drivers (this is a temporary workaround and should be removed when
we are moving out the non atomic driver helpers)
v4:
*fixed typo and formatting
v5: (no functional changes)
* Fixed formatting in drm_dp_mst_update_slots()
* Reference mst_state instead of mst_state->mgr for debugging info
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
[v5 nitpicks]
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-3-lyude@redhat.com
In order to better track where in the kernel the dma-buf code is used,
put the symbols in the namespace DMA_BUF and modify all users of the
symbols to properly import the namespace to not break the build at the
same time.
Now the output of modinfo shows the use of these symbols, making it
easier to watch for users over time:
$ modinfo drivers/misc/fastrpc.ko | grep import
import_ns: DMA_BUF
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20211010124628.17691-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commits ddab8bd788 ("drm/amd/display: Fix two cursor duplication
when using overlay") and e7d9560aea ("Revert "drm/amd/display: Fix overlay
validation by considering cursors"").
tl;dr ChromeOS uses the atomic interface for everything except the cursor. This
is incorrect and forces amdgpu to disable some hardware features. Let's revert
the ChromeOS-specific workaround in mainline and allow the Chrome team to keep
it internally in their own tree.
See [1] for more details. This patch is an alternative to [2], which added
ChromeOS detection.
[1]: https://lore.kernel.org/amd-gfx/JIQ_93_cHcshiIDsrMU1huBzx9P9LVQxucx8hQArpQu7Wk5DrCl_vTXj_Q20m_L-8C8A5dSpNcSJ8ehfcCrsQpfB5QG_Spn14EYkH9chtg0=@emersion.fr/
[2]: https://lore.kernel.org/amd-gfx/20211011151609.452132-1-contact@emersion.fr/
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: ddab8bd788 ("drm/amd/display: Fix two cursor duplication when using overlay")
Fixes: e7d9560aea ("Revert "drm/amd/display: Fix overlay validation by considering cursors"")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On arcturus, not all platforms use PMFW based fan control. On such
ASICs fan control by PMFW will be disabled in PPTable. Disable hwmon
knobs for fan control also as it is not possible to report or control
fan speed on such platforms through driver.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The extended bits were not available for use on vega20 and
presumably arcturus as well.
Fixes: a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12")
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing check in smu_v11_0_init_display_count(),
Fixes: af3b89d3a6 ("drm/amdgpu/smu11.0: convert to IP version checking")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if VCN instances are harvested when controlling
VCN power gating and setting up VCN clocks.
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some navy flounder boards do not properly mark harvested
VCN instances. Fix that here.
v2: use IP versions
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use the id variable, just use the constant
plus instance offset directly.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use the tmp variable, just use the constant
directly.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roughly the same code was present in all VCN versions.
Consolidate it into a single function.
v2: use AMDGPU_UCODE_ID_VCN + i, check if num_inst >= 2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Only enable firmware for the instance that is enabled.
v2: use AMDGPU_UCODE_ID_VCN + i
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all migrate.cpages returned from migrate_vma_setup can be migrated,
for example non anonymous page, or out of device memory. So after
migrate_vma_pages returns, add debug message to count pages are
successfully migrated which has MIGRATE_PFN_VALID and
MIGRATE_PFN_MIGRATE flag set.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cpages is only updated by migrate_vma_setup. So capture its value at
that point to clarify the significance of the number. The next patch
will add counting of actually migrated pages after migrate_vma_pages for
debug purposes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP firmware will be responsible for applying the GRBM CAM remapping in
the production. And the GRBM_CAM_INDEX / GRBM_CAM_DATA registers will be
protected by PSP under security policy. So remove it according to the
new security policy.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable GPU metrics feature in one VF mode.
These are only possible in one VF mode because the VF is dedicated in that case.
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
bios_golden_init will override dccg_init during init_hw.
[How]
Move dccg_init to after bios_golden_init.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The original latencies were causing underflow in some modes
[how]
Replace with the up-to-date watermark values based on new measurments
Reviewed-by: Ahmad Othman <ahmad.othman@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Z9 latency is higher than when we originally tuned the watermark
parameters, causing underflow. Increasing the value until the latency
issues is resolved.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Immediate flip can be enabled dynamically and has higher BW requirements
when validating which voltage mode to use.
If we validate when it's not set then potentially DCFCLK will be too low
and we will underflow.
[How]
DM always requires support so always require it as part of DML input
parameters.
This can't be enabled unconditionally on older ASIC because it blocks
some expected modes so only target DCN3.1 for now.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Prefetch BW calculated is lower than the DML reference because of a
porting error that's excluding cursor and row bandwidth from the
pixel data bandwidth.
[How]
Change the dml_max4 to dml_max3 and include cursor and row bandwidth
in the same calculation as the rest of the pixel data during vactive.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The requirement is that image width up to 4096 shall be supported
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.
Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Change the error message when the bad_page_threshold is reached,
explicitly stating that the GPU will not be initialized.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is driven by the IP
discovery table now.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is now driven by
amdgpu IP discovery code.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since IP enumeration is now driven by
amdgpu IP discovery code.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
raven_device_info is not used when KFD_SUPPORT_IOMMU_V2 is not
set.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hawaii_device_info is not used when CONFIG_DRM_AMDGPU_CIK is not
set.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check was incorrectly converted to IP version checking.
Fixes: 4b0ad84254 ("drm/amdgpu/gfx10: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When selecting between levels in the force performance levels interface
sclk (gfxclk) was not set correctly for all levels. Select the proper
sclk settings for all levels.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1726
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the following coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:427:
WARNING: use scnprintf or sprintf.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, hw_id_name string is NULL for SDMA 2 and 3 when dumping
ip version from VBIOS.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Output a warning message if RAS TA returns UNSUPPORTED_ERROR_INJ status.
v2: implement it in psp_ras_ta_check_status function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create new function to check status returned by RAS TA.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1445d967fb.
This patch introduced a couple of dmesg warnings, this is not a valid
approach anymore. For this reason, we are reverting this patch, and we
need to revert the workaround patch.
v2: squash in unused variable removal (Alex)
Cc: Hanghong Ma <hanghong.ma@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
V3_4 is latest in use.
[How]
Add bios parser support for firmware_info_v3_4 along
with some relevant fields it is also retrieving from dce_info
and smu_info.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
* Fix some issues such as DP2 problem, prefetch bandwidth calculation
for DCN3.1 and others.
* Increased Z9 latency and removed z10 save after dsc disable.
* Revert a couple of bad changes.
* Added missing PSR state patch.
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable hdmistream and hdmichar root clocks when not being used.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
bios_golden_init will override dccg_init during init_hw.
[How]
Move dccg_init to after bios_golden_init.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Z10 save is done during PSR and bootup.
DSC disable does not need to save for Z10.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable dpstreamclk, symclk32_se, and symclk32_le when not in use.
Reviewed-by: Ariel Bernstein <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The original latencies were causing underflow in some modes
[how]
Replace with the up-to-date watermark values based on new measurments
Reviewed-by: Ahmad Othman <ahmad.othman@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Z9 latency is higher than when we originally tuned the watermark
parameters, causing underflow. Increasing the value until the latency
issues is resolved.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Immediate flip can be enabled dynamically and has higher BW requirements
when validating which voltage mode to use.
If we validate when it's not set then potentially DCFCLK will be too low
and we will underflow.
[How]
DM always requires support so always require it as part of DML input
parameters.
This can't be enabled unconditionally on older ASIC because it blocks
some expected modes so only target DCN3.1 for now.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable root clock for dsc when not being used.
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
PSR_STATE2b was introduced on DMCUB side, but not on the driver side,
which caused convert_psr_state helper function to return
PSR_STATE_INVALID. That caused visual lagging during state transition.
[how]
Add PSR_STATE2b to dc_psr_state and convert_psr_state
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Prefetch BW calculated is lower than the DML reference because of a
porting error that's excluding cursor and row bandwidth from the
pixel data bandwidth.
[How]
Change the dml_max4 to dml_max3 and include cursor and row bandwidth
in the same calculation as the rest of the pixel data during vactive.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remap phyd32clk to PHYF and PHYG for B0, PHYC and PHYD are unused
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The requirement is that image width up to 4096 shall be supported
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Error message on Linux when booting.
[How]
Removed power down on boot from DCN31 HW init
to match DCN10 HW init.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Derek Lai <derek.lai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Calculation of scaling ratio can result in a crash due to zero'd src or
dst plane rects.
[How]
Validate that src and dst rects are valid before using for scaling
calculations.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hardware team has recommended to generically hard code this register to
0xFF as part of the effort to eventually remove this control. However
we set it to 0xF instead.
This causes 4 of audio 8ch to be muted.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
One of the current VPG power on calls is unnecessary
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some DP2.0 RX requires us to set MST_EN even for SST configuration.
We added this debug option so we can configure this temporary workaround
for the RX.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When rapidly plugging and unplugging a DP sink, detection link
training can be mistakenly skipped.
This is due to the hotplug processing occurring before the
encoder assignment logic has had a chance to process the removal
of a stream. The encoder that would be used for detection link
training is then erroneously reported as already in use and
detection link training is skipped.
[How]
During hot plug processing, only determine a link encoder to be
unavailable for a particular link if it has been assigned to a
different link.
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When copying a stream, the encoder assigned to it is copied too.
Encoder assignment should only happen when executing the encoder
assignment function link_encs_assign().
[How]
Clear the link encoder pointer for copied stream.
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable root clock for dpp when not being used.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On renoir usb-c port stops functioning on resume after f/w update.
New dmub firmware caused regression due to conflict with dmcu.
With new dmub f/w dmcu is superseded and should be disabled.
[How]
- Disable dmcu for all dcn21.
Check dmesg for dmub f/w version.
The old firmware (before regression):
[drm] DMUB hardware initialized: version=0x00000001
All other versions require this patch for renoir.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_irq_uninstall is called in irq_fini_hw so that irq is disabled in sw
stage. SMU (and maybe other IP blocks) fini_hw will call irq_put for
cleanup and the whole cleanup process will be skipped because of
drm->irq_enable = false.
[How]
Move ip_fini_early before irq_fini_hw.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ROCr needs to be able to identify all devices that have direct access to
fine grain memory, which should include CPUs that are connected to GPUs
over xGMI. The GPU hive ID can be mapped onto the CPU hive ID since the
CPU is part of the hive.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some registers' access will fail without PSP RL after resume.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should unreference a gem object instead of an amdgpu bo here.
Fixes: fd9a9f8801 ("drm/amdgpu: Use GEM obj reference for KFD BOs")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missed a few asics.
v2: update comment
Fixes: 82d05736c4 ("drm/amdgpu/amdgpu_psp: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VEGA20 is 11.0.2, but it's handled by powerplay, not
swsmu.
Fixes: a8967967f6 ("drm/amdgpu/amdgpu_smu: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When creating unregistered new svm range to recover retry fault, avoid
new svm range to overlap with ranges or userptr ranges managed by TTM,
otherwise svm migration will trigger TTM or userptr eviction, to evict
user queues unexpectedly.
Change helper amdgpu_ttm_tt_affect_userptr to return userptr which is
inside the range. Add helper svm_range_check_vm_userptr to scan all
userptr of the vm, and return overlap userptr bo start, last.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.
Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missed in the conversion to IP version checking.
Fixes: af3b89d3a6 ("drm/amdgpu/smu11.0: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When IOMMU disabled in sbios and kfd in iommuv2 path,
IOMMU resume failure blocks system resume. Don't allow kfd to
use iommu v2 when iommu is disabled.
Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When IOMMU disabled in sbios and kfd in iommuv2 path, iommuv2
init will fail. But this failure should not block amdgpu driver init.
Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
migrate_vma_setup may return cpages 0, means 0 page can be migrated,
treat this as error case to skip the rest of vma migration steps.
Change svm_migrate_vma_to_vram and svm_migrate_vma_to_ram to return the
number of pages migrated successfully or error code. The caller add up
all the successful migration pages and update prange->actual_loc only if
the total migrated pages is not 0.
This also removes the warning message "VRAM BO missing during
validation" if migration cpages is 0.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No function change, use pr_debug_ratelimited to avoid per page debug
message overflowing dmesg buf and console log.
use dev_err to show error message from unexpected situation, to provide
clue to help debug without enabling dynamic debug log. Define dev_fmt to
output function name in error message.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when smu->adev->pm.ac_power == 0, message parameter with bit 16 set is saved
to smu->current_power_limit.
Fixes: 0cb4c62125 ("drm/amd/pm: correct power limit setting for SMU V11)"
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode2 reset, the GPU is temporarily removed from the
mgpu_info list. As a result, page retirement fails because it
cannot find the GPU in the GPU list.
To fix this, create our own list of GPUs that support MCE notifier
based page retirement and use that list to check if the UMC error
occurred on a GPU that supports MCE notifier based page retirement.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the missing call to re-enable RAS error injections on the Aldebaran
mode2 reset code path.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When system boots in headless mode, connecting a 4k display creates a
null pointer dereference due to hubp for a certain plane being null.
Add a condition to check for null hubp before dereferencing it.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE legacy optimization path isn't well tested under new DC optimization
flow which can result in underflow occuring when initializing X11 on
Carrizo.
[How]
Retain the legacy optimization flow for DCE and keep the new one for DCN
to satisfy optimizations being correctly applied for ASIC that can
support it.
Fixes: 34316c1e56 ("drm/amd/display: Optimize bandwidth on following fast update")
Reported-by: Tom St Denis <tom.stdenis@amd.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For optimal power savings on panels that can support it.
This was previously left disabled by default because of issues with
compositors that do not pageflip and scan out directly to the
frontbuffer.
For these compositors we now have detection methods that wait for x
number of pageflips after a full update - triggered by a buffer or
format change typically.
This may introduce bugs or new cases not tested by users so this is
only currently targeting newer DCN.
[How]
Add code in DM to set PSR state by default for newer DCN while falling
back to the feature mask for older.
Add a global debug flag that can be set to disable it for either.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display support for cyan skillfish is ready now. Enable it!
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current logic checks whether the cursor plane blending
properties match the primary plane's. However that's wrong,
because the cursor is painted on all planes underneath. If
the cursor is over the primary plane and the overlay plane,
it's painted on both pipes.
Iterate over the CRTC planes and check their scaling match
the cursor's.
v4: fix typo in commit message (Harry)
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_range_list svms declaration removed to avoid werror when
CONFIG_HSA_AMD_SVM is not enabled.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export svm_range_list_lock_and_flush_work to make other kfd parts be
able to sync svm_range_list.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Avoid conflict with address ranges mapped by SVM
mechanism that try to be allocated again through
ioctl_alloc in the same process. And viceversa.
[How]
For ioctl_alloc_memory_of_gpu allocations
Check if the address range passed into ioctl memory
alloc does not exist already in the kfd_process
svms->objects interval tree.
For SVM allocations
Look for the address range into the interval tree VA from
the VM inside of each pdds used in a kfd_process.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's used internally by firmware. Using it in the driver
could conflict with firmware.
v2: squash in fix for navi1x (Alex)
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's used internally by firmware. Using it in the driver
could conflict with firmware.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Allow empty drm leases for creating separate GEM namespaces.
Cross-subsystem Changes:
- Slightly rework dma_buf_poll.
- Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
the lockless dma-resv functions.
Core Changes:
- Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
- Add more DP2 headers.
- fix CONFIG_FB dependency in fb_helper.
- Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
- Fix crash on a 0 or invalid EDID.
Driver Changes:
- Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
- Add mode_valid to ti-sn65dsi86 bridge.
- Support multiple syncobjs in v3d.
- Add R8, RGB332 and RGB888 pixel formats to GUD.
- Use devm_add_action_or_reset in dw-hdmi-cec.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmFdfuwACgkQ/lWMcqZw
E8OTgg/+Nmsqhj1tsbSCWF1yx81CXHVSOhExPaMl+GPs6+y+sZ+U2rN99dnbULvA
U56eOmjc8FvgmK89BwhSYNt++QYIRRpzjBGlCYm4bwpgqFOmYsK+en35PYMwHdxM
Ke8newhzqa6/detvjX52igddZzrBv1Cs8aXuV5rw7Dg0ivlSlQUV0MO8JYwCliWI
arRT8bg7wzUzhyRZqwqOqKXjvRirqBlFjJmvfL0WgHevZbzYuXbn4eWCUgCVthMH
pU9QgK6FMW912pBxVppDO2aTDmNvqwj1BsB3RFfRuqS/JJ4s/gf39JxsipnI+/qn
kPxZVFzzonR8Nl6h9sPi1jZrcVDCBebFgyG8hSgIVb/09U7AVYomtP18VKeh8yCy
Pp4iQINqOcyMPmXKF491LIL92dcXZAIRaRQFKc/ZSHcfIDA7ZB1+7zf1ixBjlxjP
GqtjLbmPspI2DzBRlTFEdf58jvX70E5nFYdQyYcy3VprJHuqEgL5PKz2Xcnve6R0
dEkGA2vMrGtb23YyjbFTNfkdvg9WYXze9HbQLt7kc8mI77TugkG0/rCcwv5pEEu3
WSwqMeb+5H+7va4AI715MoXbxgnCba2zPTUm1s8kSqTK0Oighc/vWcnnJ4iVuEGE
8Xt8AIIYUtccufR6ujucVUh7nju2ZOnFE7S92LybnGnByAIADfM=
=qxpr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.16:
UAPI Changes:
- Allow empty drm leases for creating separate GEM namespaces.
Cross-subsystem Changes:
- Slightly rework dma_buf_poll.
- Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
the lockless dma-resv functions.
Core Changes:
- Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
- Add more DP2 headers.
- fix CONFIG_FB dependency in fb_helper.
- Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
- Fix crash on a 0 or invalid EDID.
Driver Changes:
- Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
- Add mode_valid to ti-sn65dsi86 bridge.
- Support multiple syncobjs in v3d.
- Add R8, RGB332 and RGB888 pixel formats to GUD.
- Use devm_add_action_or_reset in dw-hdmi-cec.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Wed 06 Oct 2021 20:48:12 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2602f4e9-a8ac-83f8-6c2a-39fd9ca2e1ba@linux.intel.com
Remove all but the first include of reg_helper.h and core_types.h
from dcn201_clk_mgr.c.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adev_to_drm is used everywhere, so improve recent changes
when accessing drm_device pointer from amdgpu_device.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fix the deadlock with the BO reservations during SVM_BO evictions
while allocations in VRAM are concurrently performed. More specific,
while the ttm waits for the fence to be signaled (ttm_bo_wait), it
already has the BO reserved. In parallel, the restore worker might be
running, prefetching memory to VRAM. This also requires to reserve the
BO, but blocks the mmap semaphore first. The deadlock happens when the
SVM_BO eviction worker kicks in and waits for the mmap semaphore held
in restore worker. Preventing signal the fence back, causing the
deadlock until the ttm times out.
We don't need to hold the BO reservation anymore during validation
and mapping. Now the physical addresses are taken from hmm_range_fault.
We also take migrate_mutex to prevent range migration while
validate_and_map update GPU page table.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Got Werror when building with Clang-13:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:195:2:
error: variable 'ts' is used uninitialized whenever switch default is
taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:200:9:
note: uninitialized use occurs here
return ts;
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:180:2:
note: variable 'ts' is declared here
enum dpia_set_config_ts ts;
^
1 error generated.
Fix it.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable result is being initialized with a value that is never
read, it is being updated immediately afterwards in both branches
of an if statement. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missed when converting the driver over to IP based
initialization.
Tested-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unify BO evicting functionality for possible memory
types in amdgpu_ttm.c.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPALT detection for B0 PHY has its own set of RDPCSPIPE registers
[How]
Use RDPCSPIPE registers to detect if DPALT lane is 4 lane
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The existing limit was mistakenly bigger than 4k for DCN 3.1
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Overriding link setting inside override_training_settings
result in fallback link settings being ignored. This can
potentially cause link training to always fail and consequently
result in an infinite loop of link training to occur in
dp_verify_link_cap during detection.
[How]
Since preferred link settings are already considered inside
decide_link_settings, skip the check in override_training_settings
to avoid infinite link training loops.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For those video format with 60 fps, the user space player could
ask for 120Hz for playback.
[How]
Add 120 in the table of common rates.
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Aldebaran, GPU driver will handle bad page retirement
for GPU memory even though UMC is host managed. As a result,
register a bad page retirement handler on the mce notifier
chain to retire bad pages on Aldebaran.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check first if debugfs is initialized before creating
amdgpu debugfs files.
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
YELLOW_CARP_B0 address was not correct
[How]
Set YELLOW_CARP_B0 to 0x1A.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Condition variable sometimes terminated unexpectedly
[How]
Use wait_for_completion_timeout to avoid unexpected termination of CV
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. HPD callback function has deadlock problem
2. HPD status is not assigned
3. There is crash due to null pointer
4. link_enc is NULL in DPIA case
[How]
1. Fix deadlock problem by moving it out of the
drm_modeset_lock
2. Assign HPD status from the notify of outbox
from dmub FW
3. Fix the crash by checking if pin or enc exists
4. Use link_enc_cfg_get_link_enc_used_by_link to
dynamically assign
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
1. Remove unnecessary dummy interrupt source for USB4 HPD & HPD RX
2. Adjust parameter for DPCD writing of link training process of DPIA link
3. Adjust specific AUX defer delay for DPIA link
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Additional debug flags that can be useful for testing USB4 DP
link training.
Add flags:
- 0x2 : Forces USB4 DP link to non-LTTPR mode
- 0x4 : Extends status read intervals to about 60s.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIB_BE_CNTL<i>.DIG_HPD_SELECT selects the HPD block being used
by the display endpoint assigned to DIG<i>. In the case of USB4
display endpoints, no physical HPD block is assigned.
[How]
Setting DIB_BE_CNTL<i>.DIG_HPD_SELECT to 5 indicates that no HPD
is assigned to a display endpoint. Firmware decrements the
HPD_SELECT value by 1 before writing it to the register.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.
[How]
1) DMUB posts SET_CONFIG reply as an Outbox1 message of type
DMUB_OUT_CMD__SET_CONFIG_REPLY.
2) The dmub async to sync mechanism for AUX is modified to accommodate
SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To add support for dpia debug options.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We requires information from DPCD in order to identify USB4 DP
tunneling targets.
[How]
Add USB4 DP tunneling fields to DPCD struct and populate these fields
during sink detection.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.
[How]
1) Added inbox1 DPIA command subtype DMUB_CMD__DPIA_SET_CONFIG_ACCESS to
issue SET_CONFIG command to DMUB in dc_process_dmub_set_config_async().
DMUB processes the command with DPIA sends reply back immediately or
in an outbox1 message triggering an outbox1 interrupt to driver.
2) DMUB posts SET_CONFIG reply as an Outbox1 message of type
DMUB_OUT_CMD__SET_CONFIG_REPLY.
3) The dmub async to sync mechanism for AUX is modified to accommodate
SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Clear training pattern sequence for hop in display path once clock
recovery and equalization phases of DP tunnel link training completed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Equalisation is the mandatory second phase of DisplayPort link training
over a USB4 DP tunnel.
[How]
Implement equalisation phase for DP tunneled over USB4 in DPIA
training module.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Clock recovery is the mandatory first phase of DP link training.
[How]
- Implement clock recovery phase in DPIA training module.
- Add helper functions for building SET_CONFIG messages.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Training settings need to be applied to DPIA link at start of each
training loop. Note: FEC readiness should be configured before link
training while FEC enablement should be configured once training is
complete.
[How]
- Implement DPIA link configuration function.
- Account for dynamically assigned link encoders during link
configuration.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Training of DPIA link differs enough from that of conventional
DP link to warrant a separate implementation.
[How]
- Implement top-level of DPIA training loop.
- Make functions shared between DP and DPIA link training "public".
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Conventional links are trained with fallback during sink detection.
Have DPIA links trained with fallback too.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Driver does not need to train the first hop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
1. Add stub for getting tunneling device data
2. Add check for phy_repeater_cnt < 0xff to LTTPR check
3. Add two more bits of information to DPIA links
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add stub for DPIA link training and define new DPIA DMUB commands
to support it.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We will need a way to distinguish physically connected
links and DPIA endpoints.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To add support for HPD & HPD RX interrupt handling for USB4 DPIA in
YELLOW_CARP_B0. USB4 DPIA HPD & HPD RX interrupts are issued from DMUB to
driver as a outbox1 message.
[HOW]
1) Created get_link_index_from_dpia_port_index() to retrieve link index
from dpia port index for HPD & HPD RX dmub notifications.
2) Added DMUB HPD & HPD RX handling in dmub_srv_stat_get_notification().
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To enable dc links for USB4 DPIA ports and AUX command tunneling
for YELLOW_CARP_B0.
[HOW]
1) Created dc links for all USB4 DPIA ports in create_links().
dc_link_construct() implementation is split for legacy DDC and DPIAs.
As usb4 has no ddc, ddc->ddc_pin will be set to NULL for its dc link
and this parameter will be used to identify the dc links as DPIA. The
dc link for DPIA is further to be enhanced with implementation for link
encoder and link initialization.
2) usb4_dpia_count in struct resource_pool will be initialized to 4 in
dcn31_resource_construct() if the DCN is YELLOW_CARP_B0.
3) Enabled DMUB AUX via outbox for YELLOW_CARP_B0.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
USB4 endpoints are dynamically mapped. We create additional link
encoders for USB4 use when DC is created and destroy them when DC
is destructed
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ind_block_64b_no_128bcl means INDEP_64B && INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx10.3.
ind_block_64b means INDEP_64B && !INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx9 and gfx10.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DQE's promotion test, error appears in dmesg at boot
on dcn3.1;
[How]
Add NULL pointor check for the pointor to the amdgpu_dm_connector;
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Trying to enable multiple displays simultaneously exposed shortcomings
with the algorithm for dynamic link encoder assignment.
The main problems were:
- Assuming stream order remained constant across states would
sometimes lead to invalid DIG encoder assignment.
- Incorrect logic for deciding whether or not a DIG could support a
stream would also sometimes lead to invalid DIG encoder assignment.
- Changes in encoder assignment were wholesale while updating of the
pipe backend is incremental. This would lead to the hardware state
not matching the software state even with valid encoder assignments.
[How]
The following changes fix the identified problems.
- Use stream pointer rather than stream index to track streams across
states.
- Fix DIG compatibility check by examining the link signal type
rather than the stream signal type.
- Modify assignment algorithm to make incremental updates so software
and hardware states remain coherent.
Additionally:
- Add assertions and an encoder assignment validation
function link_enc_cfg_validate() to detect potential problems with
encoder assignment closer to their root cause.
- Reduce the frequency with which the assignment algorithm is
executed. It should not be necessary for fast state validation.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The codes to blank all dp display have been called many times,
so add a helper in dc_link to make it more concise.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- New firmware version
- Fix DMUB problems on stress test.
- Improve link training by skip overrride for preferred link
- Refinement of FPU code structure for DCN2
- Fix 3DLUT skipped programming
- Fix detection of 4 lane for DPALT
- Fix dcn3 failure due to dmcbu_abm not created
- Limit display scaling to up to 4k for DCN 3.1
- Add helper for blanking all dp displays
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPALT detection for B0 PHY has its own set of RDPCSPIPE registers
[How]
Use RDPCSPIPE registers to detect if DPALT lane is 4 lane
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The existing limit was mistakenly bigger than 4k for DCN 3.1
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current FPU code for DCN2x is located under dml/dcn2x.
This is not aligned with DC's general source tree
structure.
[How]
Move FPU code for DCN2x to dml/dcn20.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Overriding link setting inside override_training_settings
result in fallback link settings being ignored. This can
potentially cause link training to always fail and consequently
result in an infinite loop of link training to occur in
dp_verify_link_cap during detection.
[How]
Since preferred link settings are already considered inside
decide_link_settings, skip the check in override_training_settings
to avoid infinite link training loops.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen.
Fixes: c9a6b82f45 ("drm/amdgpu: Implement DPC recovery")
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen.
Fixes: c9a6b82f45 ("drm/amdgpu: Implement DPC recovery")
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure that we notice this in error reports.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 728e7e0cd6.
Further discussion reveals that this feature is severely broken
and needs to be reverted ASAP.
GPU reset can never be delayed by userspace even for debugging or
otherwise we can run into in kernel deadlocks.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Depends on DRM_AMDGPU_SI and DRM_AMD_DC
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the rare event when GFX IP suspend coincides with a s0ix entry, don't
schedule a delayed work, instead signal PMFW immediately to allow GFXOFF
entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be
signaled about GFXOFF status before amd-pmc module passes OS HINT
to PMFW telling that everything is ready for a safe s0ix entry.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr,
but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it!
Fixes: 264fb4d332 ("drm/amdgpu: Add multi-GPU DMA mapping helpers")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
YELLOW_CARP_B0 address was not correct
[How]
Set YELLOW_CARP_B0 to 0x1A.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG.
[How]
Fix DIG mapping.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 4b7786d87f)
[Why]
Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used.
[How]
Make sure RDPCSPIPE registers are programmed correctly.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit bdd1a21b52)
Depends on DRM_AMDGPU_SI and DRM_AMD_DC
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Running into bugchecks during stress test where rptr is 0xFFFFFFFF.
Typically this is caused by a hard hang, and can come from HW outside
of DCN.
[How]
To prevent bugchecks when writing the DMUB rptr, fist check that the
rptr is valid.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove two repeated includings in line 46 and 47.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the rare event when GFX IP suspend coincides with a s0ix entry, don't
schedule a delayed work, instead signal PMFW immediately to allow GFXOFF
entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be
signaled about GFXOFF status before amd-pmc module passes OS HINT
to PMFW telling that everything is ready for a safe s0ix entry.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IP_VERSION(11, 0, 13) does the exact same thing as
IP_VERSION(11, 0, 12) so squash them together.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add jpeg2.6 start/end with updated PCTL0_MMHUB_DEEPSLEEP_IB address.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.lilu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move jpeg2 shared macro to header file
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.lilu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr,
but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it!
Fixes: 264fb4d332 ("drm/amdgpu: Add multi-GPU DMA mapping helpers")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If you set amdgpu.discovery=2 you can force the the driver to
fetch the IP discovery table from a file rather than from the
table shipped on the device. This is useful for debugging and
for device bring up and emulation when the tables may be in flux.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can get the pdev and asic type from the adev. No need
to pass them explicitly.
v2: squash in build fix for !CONFIG_HSA_AMD from Anson
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle SRIOV requirements when adding IP blocks.
v2: add comment about UVD/VCE support on vega20 SR-IOV
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split into several smaller per IP functions to make it
easier to handle ordering issues for things like
SR-IOV in a follow up patch.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow us to query instances versions more cleanly.
Instancing support is not consistent unfortunately. SDMA is a
good example. Sienna cichlid has 4 total SDMA instances, each
enumerated separately (HWIDs 42, 43, 68, 69). Arcturus has 8
total SDMA instances, but they are enumerated as multiple
instances of the same HWIDs (4x HWID 42, 4x HWID 43). UMC
is another example. On most chips there are multiple
instances with the same HWID. This allows us to support both
forms.
v2: rebase
v3: clarify instancing support
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For new chips with no explicit entry in the PCI ID list.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new asic type for asics where we don't have an
explicit entry in the PCI ID list. We don't need
an asic type for these asics, other than something higher
than the existing ones, so just use this for all new
asics.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Default to PSP ucode loading unless the user specifies
direct.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the table rather than asic specific harvest registers.
v2: remove harvesting register checking
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcoding it. We already have the number of VCN
instances from a previous patch, so just update the VCN
instances for chips with static tables.
v2: squash in checks for SDMA3,4 (Guchun)
v3: clarify VCN changes
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are missed.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can store the VCN IP revision for each instance of VCN.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, we will run into error case path.
v2: fix build when CONFIG_DRM_AMD_DC_DCN is not set
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: squash in fix for navy flounder and sienna cichlid
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: switch if statement to a switch statement
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are not going to support any new chips with the old
non-DC code so make it the default.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcoding based on asic_type, use the IP
discovery table to configure the driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hardcode the IP versions for asics without IP discovery tables
and then enumerate the asics based on the IP versions.
TODO: fix SR-IOV support
v2: Squash in HDP fix for Renoir
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So they can be driven by IP discovery table.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can track grab the appropriate DCE info out of the
IP discovery table. This is a separare IP from DCN.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: drop unrelated change
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcoding based on asic_type, use the IP
discovery table to configure the driver.
v2: rebase
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: rebase
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: rebase
v3: switch some if statements to switch statements
v4: add yellow carp fix (Yifan)
v5: squash in fixes for YC and GS (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than hardcoding based on asic_type, use the IP
discovery table to configure the driver.
Only tested on Navi10 so far.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drive the asic setup from the IP discovery table rather than
hardcoded settings based on asic type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: squash in gmc fixes
v3: rebase
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bind to all 0x1002 GPU devices.
For now we explicitly return -ENODEV for generic bindings.
Remove this check once IP discovery based checking is in place.
v2: rebase (Alex)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once we claim all 0x1002 PCI display class devices, we will
need to filter out devices owned by radeon.
v2: rename radeon id array to make it more clear that
the devices are not supported by amdgpu.
add r128, mach64 pci ids as well
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: rebase, squash in navi10 fixes (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: rebase
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial support for all navi based parts.
v2: rebase
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So they can be driven by IP dicovery table.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can track grab the appropriate XGMI info out of the
IP discovery table.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prerequisite for using IP versions in the driver rather
than asic type.
v2: Use IP_VERSION() macro instead of new function
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can check the IP versions directly rather than using
asic type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Useful for debugging and new asic validation.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clear error count when persistant harvesting is not enabled
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some reason we're defining DP 2.0 definitions inside our
driver. Now that patches to introduce relevant definitions
are slated to be merged into drm-next this is causing conflicts.
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c:33:
In file included from ./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:70:
In file included from ./drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu_mode.h:36:
./include/drm/drm_dp_helper.h:1322:9: error: 'DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER' macro redefined [-Werror,-Wmacro-redefined]
^
./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dp_types.h:881:9: note: previous definition is here
^
1 error generated.
[How]
Guard all display driver defines with #ifndef for now. Once we pull
in the new definitions into amd-staging-drm-next we will follow
up and drop definitions from our driver and provide follow-up
header updates for any addition DP 2.0 definitions required
by our driver.
We also ensure drm_dp_helper.h is included before dc_dp_types.h.
v3: Ensure drm_dp_helper.h is included before dc_dp_types.h
v2: Add one missing endif
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In ras poison mode, page retirement will be handled by the irq handler of the
module which consumes corrupted data.
v2: rename ras_process_cb to ras_poison_consumption_handler.
move the handler's implementation from ASIC specific file to common
file.
v3: call gpu reset for xGMI connected mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the s2idle stress test sdma resume fail occasionally,in the
failed case GPU is in the gfxoff state.This issue may introduce
by firmware miss handle doorbell S/R and now temporary fix the issue
by forcing exit gfxoff for sdma resume.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
add display related cyan_skillfish files in.
makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag.
v2: squash in clang fixes from Harry, Nathan
v3: squash in missing CONFIG_DRM_AMD_DC check (Alex)
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Jun Lei <jun.lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 299f040e85.
This patchset breaks on intel platforms and was previously NACK'd by
Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-2-sean@poorly.run
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.
Remove the implementation of mem_encrypt_active() across all arches.
For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-16-greenfoo@u92.eu
This patch is to add cyan_skillfish asic header files.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Jun Lei <jun.lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support libdrm tests.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle all DMA IOMMU group related dependencies before the
group is removed and we try to access it after free.
v2:
Move the actul handling function to TTM
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We use the number_instance index that we get from the fw discovery blob
to index into an array for example.
Update error messages (Alex)
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The two AMD drivers have their own custom offsetof() implementation
that now triggers a warning with recent versions of clang:
drivers/gpu/drm/radeon/radeon_atombios.c:133:14: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]
Change all the instances to use the normal offsetof() provided
by the kernel that does not have this problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use resource_size function on resource object
instead of explicit computation.
Clean up coccicheck warning:
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:905:10-13: ERROR: Missing
resource_size with res
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The overflow check in amdgpu_bo_list_create() causes a warning with
clang-14 on 64-bit architectures, since the limit can never be
exceeded.
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c:74:18: error: result of comparison of constant 256204778801521549 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (num_entries > (SIZE_MAX - sizeof(struct amdgpu_bo_list))
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The check remains useful for 32-bit architectures, so just avoid the
warning by using size_t as the type for the count.
Fixes: 920990cb08 ("drm/amdgpu: allocate the bo_list array after the list")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX9+, format modifiers are always enabled and ensure the
frame-buffers can be scanned out at ADDFB2 time.
On GFX8-, format modifiers are not supported and no other check
is performed. This means ADDFB2 IOCTLs will succeed even if the
tiling isn't supported for scan-out, and will result in garbage
displayed on screen [1].
Fix this by adding a check for tiling flags for GFX8 and older.
The check is taken from radeonsi in Mesa (see how is_displayable
is populated in gfx6_compute_surface).
Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel)
[1]: https://github.com/swaywm/wlroots/issues/3185
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
