add support that allow the userspace tool like RGP to get the GFX clock
value at runtime, the fix follow the old way to show the min/current/max
clocks level for compatible consideration.
=== Test ===
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz *
1: 1100Mhz
2: 1600Mhz
then run stress test on one APU system.
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz
1: 1040Mhz *
2: 1600Mhz
The current GFXCLK value is updated at runtime.
BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260
Reviewed-by: Huang Ray <Ray.Huang@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When selecting between levels in the force performance levels interface
sclk (gfxclk) was not set correctly for all levels. Select the proper
sclk settings for all levels.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1726
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are three identical spelling mistakes in dev_err messages.
Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'watermarks_table' must be freed instead 'clocks_table', because
'clocks_table' is known to be NULL at this point and 'watermarks_table' is
never freed if the last kzalloc fails.
Fixes: c98ee89736 ("drm/amd/pm: add the fine grain tuning function for vangogh")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As OOB(out-of-band) interface may be used to update the power limits.
Thus to make sure the power limits reporting of our driver always
reflects the correct values, the internal cache must be aligned
carefully.
V2: add support for out-of-band of other ASICs
align cached current power limit with OOB imposed
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform dependent to independent throttle status translation
for vangogh.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to revise two names of sensor values for vangogh.
New smu metrics table is supported by new pmfw
(from version 4.63.36.00 ), it includes two parts, one part is
the current smu metrics table data and the other part is the
average smu metrics table data. The hwmon will read the current gfxclk
and mclk from the current smu metrics table data.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to remove the "set" function of pp_dpm_mclk for vangogh.
For vangogh, mclk bonds with fclk, they will lock each other
on the same perfomance level. But according to the smu message from pmfw,
only fclk is allowed to set value manually, so remove the unnecessary
code of "set" function for mclk.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add support for new smu metrics table for vangogh.
It will support new and legacy smu metrics table in the meanwhile.
New pmfw version is 4.63.36.00, and new smu interface version is #3.
v1: check smu pmfw version to determine to use new or legacy smu metrics
table
v2: check smu interface version to determine to use new or legacy smu
metrics table
v3: revise wrong symbol
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add the callback to get vbios bootup values for
vangogh, it will get the bootup values of gfxclk, mclk, socclk and so
on.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the same thing we do for Renoir. We can check, but since
the sbios has started DPM, it will always return true which
causes the driver to skip some of the SMU init when it shouldn't.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver doesn't keep the default bootup power limit and expose it
to user. As requested we add it in driver.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the gpu_metrics interface implementations to use the latest
upgraded data structures.
V2: fit the data type change of energy_accumulator
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to correct the name of one function for vangogh.
This function is used to print the clock levels of all kinds of IP
components.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per discussions with PMFW team, the driver only needs to
notify the PMFW when the RLC is disabled. The RLC FW will notify
the PMFW directly when it's enabled.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Making them an error confuses users and the errors are harmless
as not all asics support all profiles.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1488
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should commit the value after restore them back to default as well.
$ echo "r" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are spelling mistakes in error and warning messages, the text
power_dpm_force_perfomance_level is missing a letter r and should be
power_dpm_force_performance_level. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to make the error log more clear for fine grain tuning
function, it covers Raven/Raven2/Picasso/Renoir/Vangogh.
The fine grain tuning function uses the sysfs file -- pp_od_clk_voltage,
but only when another sysfs file -- power_dpm_force_performance_level is
switched to "manual" mode, it is allowed to access "pp_od_clk_voltage".
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement hwmon API for reading/setting slow and fast PPT limit.
APU power is managed to system-level requirements through the PPT
(package power tracking) feature. PPT is intended to limit power to the
requirements of the power source and could be dynamically updated to
maximize APU performance within the system power budget.
Here FAST_PPT_LIMIT manages the ~10 ms moving average of APU power,
while SLOW_PPT_LIMIT manages the configurable, thermally significant
moving average of APU power (default ~5000 ms).
User could read slow/fast ppt limit using command "cat power*_cap" or
"sensors" in the hwmon device directory. User could adjust values of
slow/fast ppt limit as needed depending on workloads through command
"echo ## > power*_cap".
Example:
$ echo 15000000 > power1_cap
$ echo 18000000 > power2_cap
$ sensors
amdgpu-pci-0300
Adapter: PCI adapter
slowPPT: 9.04W (cap = 15.00 W)
fastPPT: 9.04W (cap = 18.00 W)
v2: align with existing interfaces for the getting/setting of PPT
limits. Encode the upper 8 bits of limit value to distinguish
slow and fast power limit type.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the soft gpu metrics is not asic related data structure.
unify them to reduce duplicate code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check GFX DPM and PG bit before enable GFXOFF on Vangogh
smu post init.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fill in the data member of v2 gpu metrics
table for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the SpareX is reserved by SMU firmware, the driver is never use it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fix below build error while we are using the kconfig
without x86.
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_get_smu_metrics_data':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:300:10:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
300 | boot_cpu_data.x86_max_cores * sizeof(uint16_t));
| ^~~~~~~~~~~~~
| boot_cpuid
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_read_sensor':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:1320:11:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
1320 | *size = boot_cpu_data.x86_max_cores * sizeof(uint16_t);
| ^~~~~~~~~~~~~
| boot_cpuid
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_od_edit_dpm_table':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:1460:19:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
1460 | if (input[0] >= boot_cpu_data.x86_max_cores) {
| ^~~~~~~~~~~~~
| boot_cpuid
v2: fix #ifdef and add comment for APU only
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to modify the fine grain tuning function for vangogh.
This patch uses the existing old flag to make the two sysfs files
work separately -- "power_dpm_force_performance_level" and
"pp_od_clk_voltage".
Only the power_dpm_force_performance_level is switched to "manual"
mode, the fine grain tuning function will be started.
In other mode, including "high","low","min_sclk","min_mclk",
"standard" and "peak", the fine grain tuning function will be shut down,
and the frequency range of gfx and cpu clock will be restored the
default values.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kernel test robot throws below warnings ->
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:594:6:
warning: no previous prototype for 'vangogh_clk_dpm_is_enabled'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:594:6:
warning: no previous prototype for function 'vangogh_clk_dpm_is_enabled'
[-Wmissing-prototypes]
Mark vangogh_clk_dpm_is_enabled() as static.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to implement the processor fine grain feature for vangogh.
It's similar with gfx clock, the only difference is below:
echo "p core_id level value" > pp_od_clk_voltage
1. "p" - set the cclk (processor) frequency
2. "core_id" - 0/1/2/3, represents which cpu core you want to select
2. "level" - 0 or 1, "0" represents the min value, "1" represents the
max value
3. "value" - the target value of cclk frequency, it should be limited in
the safe range
v2: fix some missing changes as Evan's suggestion.
v3: add version check and fix the restore.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The core processor clocks will be stored in smu metric table, then we
add this runtime information into amdgpu_pm_info interface.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add the workload map for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to support the function to change power profile mode for
vangogh. Vangogh supports 5 kinds of power profile mode:
"FULL SCREEN 3D", "VIDEO", "VR", "COMPUTE" and "CUSTOM".
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Enable gfxoff for Vangogh during smu_post_init.
System will not enter GfxOff without allow message.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Steps to enter gfxoff mode on Vangogh
1. Send EnableGfxOff message to SMU
2. Send AllowGfxOff message to SMU
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCIE MMIO bar needs to be restored firstly after the reset event
triggers. So it's unable to access the registers to wait for response
from SMU. Becasue the value of mmMP1_SMN_C2PMSG_90 is invalid at that
moment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU reset is handled via SMU similar to previous APUs.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
VanGogh supports feature mask checking which exposed by smu firmware. It
has to initial at first, otherwise, all SMU_FEATURE_xxx masks are
invalid.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The get_allowed_feature_mask is superfluous on vangogh.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN/JPEG PG won't be a feature mask bit which exposed by vangogh smu
firmware. So remove it.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent change added a new BOOTUP_DEFAULT power profile mode
to the PP_SMC_POWER_PROFILE enum but omitted updating the
corresponding profile_name array. Fix this by adding in the
missing BOOTUP_DEFAULT to profile_name[].
Addresses-Coverity: ("Out-of-bounds read")
Fixes: c27c9778a1 ("drm/amd/powerplay: support BOOTUP_DEFAULT power profile mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This pacth is to add the parameters of power profiles for vangogh,
includeing "profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk".
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable dclk/vclk dpm function in "auto" power profile
for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add support to umd P-state function for vangogh.
It enables the "set" function of 3 sysfs nodes: pp_dpm_mclk,
pp_dpm_fclk, pp_dpm_socclk, the functions is used to set the DPM
frequency level of memclk/fclk/socclk.
Due to only after enabling the "power_dpm_force_performance_level"
sysfs node, it is allowed to set these three nodes,
so this patch also enables the "powe_dpm_force_performance_level"
sysfs node, which is used to change power profile.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add some basic functions to support
umd P-state function for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add some basic functions to support umd
P-state function for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable the "fetch" function of pp_dpm_vclk and
pp_dpm_dclk.
It allows to fetch the current frequency of vcn and dcn and their
DPM levels for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add new feature map macros to resolve duplicate name.
Vangogh uses one different format to name some feature bits of swSMU, it
causes some duplicate name in the existing feature map list.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
