[Why]
Video plane gets rejected for non-zero src_y and src_x on DCN2.x.
[How]
Limit the rejection till DCN1.x and verified MPO, by dragging video
playback beyond display's left (0, 0) co-ordinates.
Fixes: d89f6048bd ("drm/amd/display: Reject non-zero src_y and src_x for video planes")
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need HPD IRQ notifications (RX, short pulse) to properly handle
DP MST for DPIA connections.
[How]
A null pointer exception currently occurs when these are received
so add a check to validate that we have a handler installed for
the notification.
Extend the HPD handler to also handle HPD IRQ (RX) since the logic is
the same.
Fixes: e27c41d5b0 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Jude Shih <shenshih@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Per DRM spec we only need to hold that lock when touching
connector->state - which we do not do in that handler.
Taking this locking introduces unnecessary dependencies with other
threads which is bad for performance and opens up the potential for
a deadlock since there are multiple locks being held at once.
[How]
Remove the connection_mutex lock/unlock routine and just iterate over
the drm connectors normally. The iter helpers implicitly lock the
connection list so this is safe to do.
DC link access also does not need to be guarded since the link
table is static at creation - we don't dynamically add or remove links,
just streams.
Fixes: e27c41d5b0 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Jude Shih <shenshih@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trivial patch which adds a comment for macro
endif's in amdgpu_dm.c
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
make action upon failure in "drm_atomic_add_affected_connectors()"
consistent with the rest of failures in amdgpu_dm_atomic_check().
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no reason to allow for partial buffers from userspace in our
debugfs. In this particular case callers will zero out the wr_buf but if
callers in the future don't do that we might be looking at corrupt data.
Linus puts it better than I can in
https://lkml.org/lkml/2021/10/26/993
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If timing and bpp of displays on mst hub are not changed,
pbn, slot_num for displays should not be changed. Linux
user mode may initiate atomic_check with different display
configuration after set mode finished. This will call to
amdgpu_dm to re-compute payload, slot_num of displays and
saved to dm_connect_state. stream->timing.flags.dsc, pbn,
slot_num are updated to values which may be different from
that were used for set mode. when dsc hub with 3 4k@60hz dp
connected, 3 dsc engines are enabled. timing.flags.dsc = 1.
timing.flags.dsc are changed to 0 due to atomic check. when
dsc hub is unplugged, amdgpu driver check timing.flags.dsc
for last mode set and find out flags.dsc = 0, then does not
disable dsc.
[HOW]
check status of displays on dsc mst hubs. re-compute pbn,
slot_num, timing.flags.dsc only if there is mode, connect
or enable/disable change.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 652de07add ("drm/amd/display: Fully switch to dmub for all dcn21
asics") switched over to using dmub on Renoir to fix Gitlab 1735, but this
implied a new dependency on newer firmware which might not be met on older
kernel versions.
Since sw_init runs before hw_init, there is an opportunity to determine
whether or not the firmware version is new to adjust the behavior.
Cc: Roman.Li@amd.com
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1772
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Fixes: 652de07add ("drm/amd/display: Fully switch to dmub for all dcn21 asics")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When updating a single connector, use
drm_kms_helper_connector_hotplug_event instead of
drm_kms_helper_hotplug_event.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-5-contact@emersion.fr
CVE-2021-42327 was fixed by:
commit f23750b5b3
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date: Wed Oct 13 16:04:13 2021 -0400
drm/amdgpu: fix out of bounds write
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland)
Fixes: 918698d5c2 ("drm/amd/display: Return the number of bytes parsed than allocated")
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMUB binary is common for both A0 and B0. Hence, driver should
notify FW about the support for DPIA in B0.
[How]
Added dpia_supported bit in dmub_fw_boot_options and will be set
only for B0.
Assign dpia_supported to true before dm_dmub_hw_init
in B0 case.
v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex)
Signed-off-by: Jude Shih <shenshih@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Notify data from outbox corrupt, the notify type should be 2 (HPD) instead of 0
(No data). We copied the address instead of the value. The memory might be
freed in the end of outbox IRQ
[How]
We should allocate the memory of notify and copy the whole content from outbox to
hpd handle function
Fixes: 88f52b1fff ("drm/amd/display: Support for SET_CONFIG processing with DMUB")
Signed-off-by: Jude Shih <shenshih@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
B0 has pipe mux for DIGC and DIGD which can be connected to PHYF/PHYG or
PHYC/PHY D.
[How]
Based on chip internal hardware revision id determine it is B0 and set
DMUB scratch register so DMUBFW can connect the display pipe is
connected correctly to the dig.
Cc: Wayne Lin <wayne.lin@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When writing long AUX commands some sinks will respond will write status
update requiring source to read status.
[How]
When a write request is replied with data (AUX_ACK_M), retry a read of
write status to determine when the write is completed.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To expose new power optimization flags to PSR interface. It allows the
PSR related power features can be enabled separately base on different
use scenarios.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stutter mode is a power saving feature on GPUs, however at
least one early raven system exhibits stability issues with
it. Add a quirk to disable it for that system.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214417
Fixes: 005440066f ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
Nope!
Cross-subsystem Changes:
drm_dp_update_payload_part1() takes a new argument for specifying what the
VCPI slot start is
Core Changes:
Make the DP MST helpers aware of the current starting VCPI slot/VCPI total
slot count...
Driver Changes:
...and then add support for taking advantage of this for 128b/132b links on DP
2.0 for amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf8e724cc0c8803d58a8d730fd6883c991376a76.camel@redhat.com
Need to guard some things with CONFIG_DRM_AMD_DC_DCN.
Fixes: 41724ea273 ("drm/amd/display: Add DP 2.0 MST DM Support")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027223914.1776061-1-alexander.deucher@amd.com
[Why]
Add DP2 MST and debugfs support
[How]
Update the slot info based on the link encoding format
Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-5-lyude@redhat.com
8b/10b encoding format requires to reserve the first slot for
recording metadata. Real data transmission starts from the second slot,
with a total of available 63 slots available.
In 128b/132b encoding format, metadata is transmitted separately
in LLCP packet before MTP. Real data transmission starts from
the first slot, with a total of 64 slots available.
v2:
* Move total/start slots to mst_state, and copy it to mst_mgr in
atomic_check
v3:
* Only keep the slot info on the mst_state
* add a start_slot parameter to the payload function, to facilitate non
atomic drivers (this is a temporary workaround and should be removed when
we are moving out the non atomic driver helpers)
v4:
*fixed typo and formatting
v5: (no functional changes)
* Fixed formatting in drm_dp_mst_update_slots()
* Reference mst_state instead of mst_state->mgr for debugging info
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
[v5 nitpicks]
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-3-lyude@redhat.com
This reverts commits ddab8bd788 ("drm/amd/display: Fix two cursor duplication
when using overlay") and e7d9560aea ("Revert "drm/amd/display: Fix overlay
validation by considering cursors"").
tl;dr ChromeOS uses the atomic interface for everything except the cursor. This
is incorrect and forces amdgpu to disable some hardware features. Let's revert
the ChromeOS-specific workaround in mainline and allow the Chrome team to keep
it internally in their own tree.
See [1] for more details. This patch is an alternative to [2], which added
ChromeOS detection.
[1]: https://lore.kernel.org/amd-gfx/JIQ_93_cHcshiIDsrMU1huBzx9P9LVQxucx8hQArpQu7Wk5DrCl_vTXj_Q20m_L-8C8A5dSpNcSJ8ehfcCrsQpfB5QG_Spn14EYkH9chtg0=@emersion.fr/
[2]: https://lore.kernel.org/amd-gfx/20211011151609.452132-1-contact@emersion.fr/
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: ddab8bd788 ("drm/amd/display: Fix two cursor duplication when using overlay")
Fixes: e7d9560aea ("Revert "drm/amd/display: Fix overlay validation by considering cursors"")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On renoir usb-c port stops functioning on resume after f/w update.
New dmub firmware caused regression due to conflict with dmcu.
With new dmub f/w dmcu is superseded and should be disabled.
[How]
- Disable dmcu for all dcn21.
Check dmesg for dmub f/w version.
The old firmware (before regression):
[drm] DMUB hardware initialized: version=0x00000001
All other versions require this patch for renoir.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.
Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For optimal power savings on panels that can support it.
This was previously left disabled by default because of issues with
compositors that do not pageflip and scan out directly to the
frontbuffer.
For these compositors we now have detection methods that wait for x
number of pageflips after a full update - triggered by a buffer or
format change typically.
This may introduce bugs or new cases not tested by users so this is
only currently targeting newer DCN.
[How]
Add code in DM to set PSR state by default for newer DCN while falling
back to the feature mask for older.
Add a global debug flag that can be set to disable it for either.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current logic checks whether the cursor plane blending
properties match the primary plane's. However that's wrong,
because the cursor is painted on all planes underneath. If
the cursor is over the primary plane and the overlay plane,
it's painted on both pipes.
Iterate over the CRTC planes and check their scaling match
the cursor's.
v4: fix typo in commit message (Harry)
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For those video format with 60 fps, the user space player could
ask for 120Hz for playback.
[How]
Add 120 in the table of common rates.
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Condition variable sometimes terminated unexpectedly
[How]
Use wait_for_completion_timeout to avoid unexpected termination of CV
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. HPD callback function has deadlock problem
2. HPD status is not assigned
3. There is crash due to null pointer
4. link_enc is NULL in DPIA case
[How]
1. Fix deadlock problem by moving it out of the
drm_modeset_lock
2. Assign HPD status from the notify of outbox
from dmub FW
3. Fix the crash by checking if pin or enc exists
4. Use link_enc_cfg_get_link_enc_used_by_link to
dynamically assign
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.
[How]
1) DMUB posts SET_CONFIG reply as an Outbox1 message of type
DMUB_OUT_CMD__SET_CONFIG_REPLY.
2) The dmub async to sync mechanism for AUX is modified to accommodate
SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ind_block_64b_no_128bcl means INDEP_64B && INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx10.3.
ind_block_64b means INDEP_64B && !INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx9 and gfx10.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current FPU code for DCN2x is located under dml/dcn2x.
This is not aligned with DC's general source tree
structure.
[How]
Move FPU code for DCN2x to dml/dcn20.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow us to query instances versions more cleanly.
Instancing support is not consistent unfortunately. SDMA is a
good example. Sienna cichlid has 4 total SDMA instances, each
enumerated separately (HWIDs 42, 43, 68, 69). Arcturus has 8
total SDMA instances, but they are enumerated as multiple
instances of the same HWIDs (4x HWID 42, 4x HWID 43). UMC
is another example. On most chips there are multiple
instances with the same HWID. This allows us to support both
forms.
v2: rebase
v3: clarify instancing support
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, we will run into error case path.
v2: fix build when CONFIG_DRM_AMD_DC_DCN is not set
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP versions rather than asic_type to differentiate
IP version specific features.
v2: drop unrelated change
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
add display related cyan_skillfish files in.
makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag.
v2: squash in clang fixes from Harry, Nathan
v3: squash in missing CONFIG_DRM_AMD_DC check (Alex)
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Jun Lei <jun.lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path
[how]
pass in pci deviceid, and break once dal_version initialized.
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Stack variable params.backlight_ramping_override is uninitialized, so it
contains junk data
[How]
Initialize the variable to false
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To support per lane lane setting adjustment, we need to change cur_lane_setting
to an array one for each lane as the first step.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, the 32bit kernel build fails due to an incorrect string
format specifier. ARRAY_SIZE() returns size_t type as it uses sizeof().
However, we specify it in a string as %ld. This causes a compiler error
and causes the 32bit build to fail.
[How]
Change the %ld to %zu as size_t (which sizeof() returns) is an unsigned
integer data type. We use 'z' to ensure it also works with 64bit build.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hayden Goodfellow <Hayden.Goodfellow@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
DC core is being released from DM before it's referenced
from hpd_rx wq destruction code.
How: Move hpd_rx destruction before DC core destruction.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some games, ie. Doom Eternal, present from compute following compute
post-fx and would benefit from having DCC image stores available.
DCN on gfx10_3 doesn't need INDEPENDENT_128B_BLOCKS = 0 so we can expose
these modifiers capable of DCC image stores.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds the missing logic to set the correct value of dcc_ind_blk for this tiling version.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need to do this workaround if we start setting this value when we fill the plane attributes.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The "base_addr_is_mc_addr" field was added for dcn3.1 support but
pa_config was never updated to set it to false.
Uninitialized memory causes it to be set to true which results in
address mistranslation and white screen.
[How]
Use memset to ensure all fields are initialized to 0 by default.
Fixes: 64b1d0e8d5 ("drm/amd/display: Add DCN3.1 HWSEQ")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.
Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Intermittently, there presents two occurrences of 0 stream
commits in a single HPD event. Current HDCP sequence does
not consider such scenerio, and will thus disable HDCP.
[How]
Add condition check to include stream remove and re-enable
case for HDCP enable.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When system is in Z10 HPD interrupts cannot fire, we may miss display
configuration changes.
[How]
When Zstate is enabled, if DMUB indicate DCN has lost power, do a
complete detection periodically.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
call stack of amdgpu dsc mst pbn, slot num calculation is as below:
-compute_bpp_x16_from_target_bandwidth
-decide_dsc_target_bpp_x16
-setup_dsc_config
-dc_dsc_compute_bandwidth_range
-compute_mst_dsc_configs_for_link
-compute_mst_dsc_configs_for_state
from pbn -> dsc target bpp_x16
bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth.
Beside pixel clock and bpp, num_slices_h and bpp_increment_div
will also affect bpp_x16.
from dsc target bpp_x16 -> pbn
within dm_update_mst_vcpi_slots_for_dsc,
pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true);
drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
{
return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006),
8 * 54 * 1000 * 1000);
}
bpp / 16 trunc digits after decimal point. This will cause calculation
delta. drm_dp_calc_pbn_mode does not have other informations,
like num_slices_h, bpp_increment_div. therefore, it does not do revese
calcuation properly from bpp_x16 to pbn.
pbn from drm_dp_calc_pbn_mode is less than pbn from
compute_mst_dsc_configs_for_state. This cause not enough mst slot
allocated to display. display could not visually light up.
[How]
pass pbn from compute_mst_dsc_configs_for_state to
dm_update_mst_vcpi_slots_for_dsc
Cc: stable@vger.kernel.org
Reviewed-by: Scott Foster <Scott.Foster@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f5b6a20c7e.
This patch broke new settings from taking effect. Hotplug is
required for new settings to take effect.
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need a check for NULL pointer access for ddc pin and aux engine.
[How]
Adding a check for ddc pin and aux engine accesses.
Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] When a connector is unplugged, dpms is forced off so that some
connector allocations are cleared off. This is done outside the commit
sequence from the userspace. This causes HUBP blank. Due to the blank
hubp, a non blocking commit which queues flip will encounter a timeout
waiting for the flip_done because prior to writing the surface flip
address, hubp was in blank.
[How] Add a marker to DM's crtc state and use this field to indicate
whether dpms was forced off during an HPD. Check for this marker before
queuing the flip.
Reviewed-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, we will try to get dm.dc_lock in handle_hpd_rx_irq() when
link lost happened, which is risky and could cause deadlock.
e.g. If we are under procedure to enable MST streams and then monitor
happens to toggle short hpd to notify link lost, then
handle_hpd_rx_irq() will get blocked due to stream enabling flow has
dc_lock. However, under MST, enabling streams involves communication
with remote sinks which need to use handle_hpd_rx_irq() to handle
sideband messages. Thus, we have deadlock here.
[How]
Target is to have handle_hpd_rx_irq() finished as soon as possilble.
Hence we can react to interrupt quickly. Besides, we should avoid to
grabe dm.dc_lock within handle_hpd_rx_irq() to avoid deadlock situation.
Firstly, revert patches which introduced to use dm.dc_lock in
handle_hpd_rx_irq():
* commit ("drm/amd/display: NULL pointer error during ")
* commit ("drm/amd/display: Only one display lights up while using MST")
* commit ("drm/amd/display: take dc_lock in short pulse handler only")
Instead, create work to handle irq events which needs dm.dc_lock.
Besides:
* Create struct hpd_rx_irq_offload_work_queue for each link to handle
its short hpd events
* Avoid to handle link lost/ automated test if the link is disconnected
* Defer dc_lock needed works in dc_link_handle_hpd_rx_irq(). This
function should just handle simple stuff for us (e.g. DPCD R/W).
However, deferred works should still be handled by the order that
dc_link_handle_hpd_rx_irq() used to be.
* Change function name dm_handle_hpd_rx_irq() to
dm_handle_mst_sideband_msg() to be more specific
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assert only when FPU is not enabled.
Fixes: 0ea7ee8217 ("drm/amd/display: Add DC_FP helper to check FPU state")
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If we're running a headless config with 0 links then the vblank
workqueue will be NULL - causing a NULL pointer exception during
any commit.
[How]
Guard access to the workqueue if it's NULL and don't queue or flush
work if it is.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700
Fixes: 58aa1c50e5 ("drm/amd/display: Use vblank control events for PSR enable/disable")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On
failure this logs a warning to the kernel journal. However warnings
shouldn't be used for atomic test-only commit failures: user-space
might be perfoming a lot of atomic test-only commits to find the
best hardware configuration.
Downgrade the log to a regular DRM atomic message. While at it, use
the new device-aware logging infrastructure.
This fixes error messages in the kernel when running gamescope [1].
[1]: https://github.com/Plagman/gamescope/issues/245
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pointer sink is being inintialized with a value that is never read,
it is later being re-assigned a new value. Remove the redundant
initialization.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When forced modes are used during certain IGT tests,
without a real connector, dc_sink would be null when
standard modes are added by the driver. Calling the
function to update freesync capabilities at this
point will result in an error being printed
[How]
Use emulated sink when available. If both the normal
and emulated sink are not available, set all freesync
parameters to 0.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors exhibit corruption at 16bpp DSC.
[How]
- Add helpers for patching edid caps.
- Use it for limiting DSC target bitrate to 15bpp for known monitors
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Max target bpp override is an option for working around
DSC issues. It is supported on DC level, but was not
used in DM.
[How]
Use actual option value instead of 0.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To add support for HPD interrupt handling from DMUB.
HPD interrupt could be triggered from outbox1 from DMUB
[HOW]
1) Use queue_work to handle hpd task from outbox1
2) Add handle_hpd_irq_helper to share interrupt handling code
between legacy and DMUB HPD from outbox1
3) Added DMUB HPD handling in dmub_srv_stat_get_notification().
HPD handling callback function and wake up the DMUB thread.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Retrieve 128/132b link cap.
2. 128/132b link training and payload allocation.
3. UHBR10 link rate support.
[squash in warning fixes - Alex]
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Scatter/gather is APU feature starting from carrizo.
adev->apu_flags is not used for all APUs.
adev->flags & AMD_IS_APU can be used for all APUs.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Compilation of the workqueue fails if not building with the DCN config
option set.
[How]
Guard calls to the flush with the DCN config option to fix the build.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR can disable the HUBP along with the OTG when PSR is active.
We'll hit a pageflip timeout when the OTG is disable because we're no
longer updating the CRTC vblank counter and the pflip high IRQ will
not fire on the flip.
In order to flip the page flip timeout occur we should modify the
enter/exit conditions to match DRM requirements.
[How]
Use our deferred handlers for DRM vblank control to notify DMCU(B)
when it can enable or disable PSR based on whether vblank is disabled or
enabled respectively.
We'll need to pass along the stream with the notification now because
we want to access the CRTC state while the CRTC is locked to get the
stream state prior to the commit.
Retain a reference to the stream so it remains safe to continue to
access and release that reference once we're done with it.
Enable/disable logic follows what we were previously doing in
update_planes.
The workqueue has to be flushed before programming streams or planes
to ensure that we exit out of idle optimizations and PSR before
these events occur if necessary.
To keep the skip count logic the same to avoid FBCON PSR enablement
requires copying the allow condition onto the DM IRQ parameters - a
field that we can actually access from the worker.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The current implementation for idle optimization support only has a
single work item that gets reshuffled into the system workqueue
whenever we receive an enable or disable event.
We can have mismatched events if the work hasn't been processed or if
we're getting control events from multiple displays at once.
This fixes this issue and also makes the implementation usable for
PSR control - which will be addressed in another patch.
[How]
We need to be able to flush remaining work out on demand for driver stop
and psr disable so create a driver specific workqueue instead of using
the system one. The workqueue will be single threaded to guarantee the
ordering of enable/disable events.
Refactor the queue to allocate the control work and deallocate it
after processing it.
Pass the acrtc directly to make it easier to handle psr enable/disable
in a later patch.
Rename things to indicate that it's not just MALL specific.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While reading remote EDID via Startech 1-to-4 hub, occasionally we
won't get response in time and won't light up corresponding monitor.
Ideally, we can still add generic modes for userspace to choose to try
to light up the monitor and which is done in
drm_helper_probe_single_connector_modes(). So the main problem here is
that we fail .mode_valid since we don't create remote dc_sink for this
case.
[How]
Also add default dc_sink if we can't get the EDID.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With kernel module parameter "freesync_video" is enabled, if the mode
is changed to preferred mode(the mode with highest rate), then Freesync
fails because the preferred mode is treated as one of freesync video
mode, and then be configurated as freesync video mode(fixed refresh
rate).
[How]
Skip freesync fixed rate configurating when modeset to preferred mode.
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMUB firmware info is printed before it gets initialized.
Correct this order to ensure true value is conveyed.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fully isolate FPU operations in a single place, we must avoid
situations where compilers spill FP values to registers due to FP enable
in a specific C file. Note that even if we isolate all FPU functions in
a single file and call its interface from other files, the compiler
might enable the use of FPU before we call DC_FP_START. Nevertheless, it
is the programmer's responsibility to invoke DC_FP_START/END in the
correct place. To highlight situations where developers forgot to use
the FP protection before calling the DC FPU interface functions, we
introduce a helper that checks if the function is invoked under FP
protection. If not, it will trigger a kernel warning.
Changes cince V3:
- Rebase
Changes cince V2 (Christian):
- Do not use this_cpu_* between get/put_cpu_ptr().
- In the kernel documentation, better describe restrictions.
- Make dc_assert_fp_enabled trigger the ASSERT message.
Changes since V1:
- Remove fp_enable variables
- Rename dc_is_fp_enabled to dc_assert_fp_enabled
- Replace wrong variable type
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC invokes DC_FPU_START/END in multiple parts of the code; this can
create a situation where we invoke this FPU operation in a nested way or
exit too early. For avoiding this situation, this commit adds a
mechanism where dc_fpu_begin/end manages the access to
kernel_fpu_begin/end.
Change since V3:
- Rebase
Change since V2:
- Christian: Do not use this_cpu_* between get/put_cpu_ptr().
Change since V1:
- Use a better variable names
- Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable
and disable
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC invokes DC_FPU_START/END in multiple parts of the code; this can
create a situation where we invoke this FPU operation in a nested way or
exit too early. For avoiding this situation, this commit adds a
mechanism where dc_fpu_begin/end manages the access to
kernel_fpu_begin/end.
Change since V3:
- Christian: Move PPC64 code to dc_fpu_begin/end.
Change since V2:
- Christian: Do not use this_cpu_* between get/put_cpu_ptr().
Change since V1:
- Use a better variable names
- Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable
and disable
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Display Manager initializes array of vblank workqueues, but only 1 is used.
[How]
Use single instance init instead of array.
Reviewed-by: Qingqing Zhou <Qingqing.Zhuo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On platforms that support multiple backlights, register
each one separately. This lets us manage them independently
rather than registering a single backlight and applying the
same settings to both.
v2: fix typo:
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We've gotten a number of reports about backlight control not
working on panels which indicate that they use aux backlight
control. A recent patch:
commit 2d73eabe29
Author: Camille Cho <Camille.Cho@amd.com>
Date: Thu Jul 8 18:28:37 2021 +0800
drm/amd/display: Only set default brightness for OLED
[Why]
We used to unconditionally set backlight path as AUX for panels capable
of backlight adjustment via DPCD in set default brightness.
[How]
This should be limited to OLED panel only since we control backlight via
PWM path for SDR mode in LCD HDR panel.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes some other code to only use aux for backlight control on
OLED panels. The commit message seems to indicate that PWM should
be used for SDR mode on HDR panels. Do something similar for
backlight control in general. This may need to be revisited if and
when HDR started to get used.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It has been decided that opm state query support will be dropped.
Therefore link encryption enabled and save current encryption states
won't be used anymore and there are no foreseeable usages in the future.
We will remove these two interfaces for clean up.
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix make htmldocs complaint:
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:628: warning: Excess function parameter 'interrupt_params' description in 'DMUB_TRACE_MAX_READ'
v2:
Moved DMUB_TRACE_MAX_READ macro above function documentation
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
CC: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new line to phy_settings output
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Print a debug message when dcc validation fails in the display driver.
Most DCC enablement related errors are from userspace. Adding a debug
print in case of a failure from display driver will aid quicker triage.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't populate the const array common_rates on the stack but instead it
static. Makes the object code smaller by 80 bytes:
Before:
text data bss dec hex filename
268019 98322 256 366597 59805 ../display/amdgpu_dm/amdgpu_dm.o
After:
text data bss dec hex filename
267843 98418 256 366517 597b5 ../display/amdgpu_dm/amdgpu_dm.o
Reduction of 80 bytes
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the unknown CEA parse case on DMUB-enabled ASICs, dmesg will
print an error message like below, this will be captured by
automation tools as it has the word like ERROR during boot up
and treated as a false error, as it does not break bootup process.
So use DRM_WARN printing for this.
[drm:amdgpu_dm_update_freesync_caps [amdgpu]] *ERROR* Unknown EDID CEA parser results
v2: Use DRM_WARN to print such info.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The original logic is to update eDP's backlight level
on every amdgpu dm atomic commit, which causes excessive
DMUB write. As a result, when playing game or moving window
around, DMUB timeout and system lagging are observed.
[How]
We only need to update eDP's backlight level when current level
doesn't match requested level.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Changes in DM needed to support Freesync HDMI on DMUB.
[How]
Change implementation to parse CEA blocks in case of DMUB-enabled ASICs.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 33f409e60e.
The patch that we are reverting here was originally applied because it
fixes multiple IGT issues and flickering in Android. However, after a
discussion with Sean Paul and Mark, it looks like that this patch might
cause problems on ChromeOS. For this reason, we decided to revert this
patch.
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Mark Yacoub <markyacoub@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Sometimes, DP receiver chip power-controlled externally by an
Embedded Controller could be treated and used as eDP,
if it drives mobile display. In this case,
we shouldn't be doing power-sequencing, hence we can skip
waiting for T7-ready and T9-ready."
[How]
Added a feature mask to enable eDP no power sequencing feature.
To enable this, set 0x10 flag in amdgpu.dcfeaturemask on
Linux command line.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need for a separate flag now that DCN3.1 is not in bring up.
Fold into DRM_AMD_DC_DCN like previous DCN IPs.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After panel power up, if PSR entry attempted too early,
PSR state may get stuck in transition.
This could happen if the panel is not ready
to respond to the SDP PSR entry message.
In this case dmub f/w is unable to abort PSR entry
since abortion is not permitted after the SDP has been sent.
[How]
Skip 5 pageflips before PSR enable.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC reports the following warning with W=1:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_psr.c:70:13:
warning:
variable ‘dc’ set but not used [-Wunused-but-set-variable]
70 | struct dc *dc = NULL;
| ^~
This variable is not used in function, this commit remove it to
fix the warning.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recently, we added support for an experimental feature named Freesync
video; for more details on that, refer to:
commit 6f59f229f8 ("drm/amd/display: Skip modeset for front porch change")
commit d10cd527f5 ("drm/amd/display: Add freesync video modes based on preferred modes")
commit 0eb1af2e82 ("drm/amd/display: Add module parameter for freesync video mode")
Nevertheless, we did not document it in detail in our driver. This
commit introduces a kernel-doc and expands the module parameter
description.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Improve the maintain/read abilities of dm code.
[How]
Create amdgpu_dm_psr.c/h files.
Move psr function from amdgpu_dm.c
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For each CRTC state, check the size of Gamma and Degamma LUTs so
unexpected and larger sizes wouldn't slip through.
TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes
v2: fix assignments in if clauses, Mark's email.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
- Commit from userspace could cause link stream to disable and hdcp
auth to reset when the HDCP has already been enabled at the moment.
CP should fall back to DESIRED from ENABLED in such cases.
- This change was previously reverted due to a regression caused, which
has now been cleared.
[HOW]
In hdcp display removal, change CP to DESIRED if at the moment CP
is ENABLED before the auth reset and removal of linked list element.
Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add debugfs entry to force dsc decoding at PCON when DSC capable
external RX is connected. In such case, it is free to test DSC
decoding at external RX or at PCON.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We update scaling settings when scaling mode has been changed.
However when changing mode from native resolution the scaling mode previously
set gets ignored.
[How]
Perform scaling settings update on modeset.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
