This reverts commit 0a5baee415.
The change introduced a regression on some chips. Reverting until
a proper solution can be found.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit ea368183ae.
Needed due to conflicts when reverting "drm/amdkfd: Unify gfx9/gfx10
context save area layouts".
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Event bitmask is a 64-bit mask with only 1 bit set. Sending this
event bitmask in KFD SMI event message is both wasteful of memory
and potentially limiting to only 64 events. Instead send event
index in SMI event message.
Please note this change does not break the ABI for the two event
types defined so far. The new index is identical to the mask used
before.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s_barrier triggers a debug exception when issued with PRIV=1,
DEBUG_EN=1. This causes spurious notifications to rocm-gdb.
Clear MODE before issuing s_barrier and restore MODE afterwards
in the context restore handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover,
the atomic adev->in_gpu_reset and hive->in_reset are used to avoid
re-entering GPU recovery.
During GPU reset and resume, it is unsafe that other threads access GPU,
which maybe cause GPU reset failed. Therefore the new rw_semaphore
adev->reset_sem is introduced, which protect GPU from being accessed by
external threads during recovery.
v2:
1. add rwlock for some ioctls, debugfs and file-close function.
2. change to use dqm->is_resetting and dqm_lock for protection in kfd
driver.
3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid
re-enter GPU recovery for the same GPU hang.
v3:
1. change back to use adev->reset_sem to protect kfd callback
functions, because dqm_lock couldn't protect all codes, for example:
free_mqd must be called outside of dqm_lock;
[ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[ 1230.177221] Call Trace:
[ 1230.178249] dump_stack+0x98/0xd5
[ 1230.179443] amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu]
[ 1230.180673] gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu]
[ 1230.181882] amdgpu_gart_unbind+0xa9/0xe0 [amdgpu]
[ 1230.183098] amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu]
[ 1230.184239] ? ttm_bo_put+0x171/0x5f0 [ttm]
[ 1230.185394] ttm_tt_unbind+0x21/0x40 [ttm]
[ 1230.186558] ttm_tt_destroy.part.12+0x12/0x60 [ttm]
[ 1230.187707] ttm_tt_destroy+0x13/0x20 [ttm]
[ 1230.188832] ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm]
[ 1230.189979] ttm_bo_put+0x1be/0x5f0 [ttm]
[ 1230.191230] amdgpu_bo_unref+0x1e/0x30 [amdgpu]
[ 1230.192522] amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu]
[ 1230.193833] free_mqd+0x25/0x40 [amdgpu]
[ 1230.195143] destroy_queue_cpsch+0x1a7/0x270 [amdgpu]
[ 1230.196475] pqm_destroy_queue+0x105/0x260 [amdgpu]
[ 1230.197819] kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu]
[ 1230.199154] kfd_ioctl+0x277/0x500 [amdgpu]
[ 1230.200458] ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu]
[ 1230.201656] ? tomoyo_file_ioctl+0x19/0x20
[ 1230.202831] ksys_ioctl+0x98/0xb0
[ 1230.204004] __x64_sys_ioctl+0x1a/0x20
[ 1230.205174] do_syscall_64+0x5f/0x250
[ 1230.206339] entry_SYSCALL_64_after_hwframe+0x49/0xbe
2. remove try_lock and introduce atomic hive->in_reset, to avoid
re-enter GPU recovery.
v4:
1. remove an unnecessary whitespace change in kfd_chardev.c
2. remove comment codes in amdgpu_device.c
3. add more detailed comment in commit message
4. define a wrap function amdgpu_in_reset
v5:
1. Fix some style issues.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Suggested-by: Luben Tukov <luben.tuikov@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some padding before the MODE register in the HWREGs block to
preserve the same layout as gfx9. This simplifies implementation of a
user-mode debugger.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The buffer allocated is of 1024 bytes. Allocate this from
heap instead of stack.
Also remove check for stack size since we're allocating from heap
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.
VM fault event is done in this patch.
v2: - remove UNREGISTER and add event ENABLE/DISABLE
- correct kfifo usage
- move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callbacks to KGD for navy flounder.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KFD support for Navy Flounder.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- fix some styling issues
- fixes for kernel-doc type
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_pasid.c isn't using the kfd2kgd interface any more. Remove redundant
code trying to look up a device for finding that interface.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for GWS in Arcturus, which needs MEC2 firmware #48
or above. Fix the MEC2 version check for Vega 10 GWS support,
since Vega 10 firmware adds 0x8000 to the actual firmware
revision. We were previously declaring support where it did not
exist.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PROCESS_QUANTUM, the time the hardware scheduler allows
processes to run before switching to other processes when it becomes
over-subscribed. Increase this to 10ms, to allow processes to better
amortize their task switch times.
Update HQD Quantum, the amount of time that an active queue stays
attached to the CP before we forcibly switch it for another active
queue for fairness.
Setting these so that HQD < PROCESS makes it easier to ensure that
we get fairness when we have multiple active queues on the device.
Otherwise we may start process-swapping before we get to all the
queues in a CP.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.9-2020-07-01:
amdgpu:
- DC DMUB updates
- HDCP fixes
- Thermal interrupt fixes
- Add initial support for Sienna Cichlid GPU
- Add support for unique id on Arcturus
- Major swSMU code cleanup
- Skip BAR resizing if the bios already did id
- Fixes for DCN bandwidth calculations
- Runtime PM reference count fixes
- Add initial UVD support for SI
- Add support for ASSR on eDP links
- Lots of misc fixes and cleanups
- Enable runtime PM on vega10 boards that support BACO
- RAS fixes
- SR-IOV fixes
- Use IP discovery table on renoir
- DC stream synchronization fixes
amdkfd:
- Track SDMA usage per process
- Fix GCC10 compiler warnings
- Locking fix
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
UAPI:
- Update comments to clarify MTYPE
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701155041.1102829-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
The function kobject_init_and_add alloc memory like:
kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs
->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller
->kmalloc_slab, in err branch this memory not free. If use
kmemleak, this path maybe catched.
These changes are to add kobject_put in kobject_init_and_add
failed branch, fix potential memleak.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
v2:
removed unwanted extra line
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use WARN to print messages with backtrace when evictions are triggered.
This can help determine the root cause of evictions and help spot driver
bugs triggering evictions unintentionally, or help with performance tuning
by avoiding conditions that cause evictions in a specific workload.
The messages are controlled by a new module parameter that can be changed
at runtime:
echo Y > /sys/module/amdgpu/parameters/debug_evictions
echo N > /sys/module/amdgpu/parameters/debug_evictions
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing code used the major version number of the DRM driver
instead of the device major number of the DRM subsystem for
validating access for a devices cgroup.
This meant that accesses allowed by the devices cgroup weren't
permitted and certain accesses denied by the devices cgroup were
permitted (if they matched the wrong major device number).
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Fixes: 6b855f7b83 ("drm/amdkfd: Check against device cgroup")
Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdkfd add support for sienna_cichlid virtual function
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Preserve scalar GPRs ttmp[4:11] and ttmp13
- Add single step exception during context save workaround
- Remove incorrect PC adjustment during context save
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The contents of macros are parsed by the assembler before conditions
have been tested. This causes assembly errors when using IP-specific
instructions in the IP-unified trap handler.
Add a preprocessing step to filter IP-specific code.
Also guard a Navi1x-specific instruction (no effect on Sienna_Cichlid).
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Replace SQC stores with TCP stores
- Synchronize with MSG_SAVEWAVE via lgkmcnt
- HW_REG_IB_STS is now read-only
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v4: drop get_tile_config, comment out other callbacks
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing code used the major version number of the DRM driver
instead of the device major number of the DRM subsystem for
validating access for a devices cgroup.
This meant that accesses allowed by the devices cgroup weren't
permitted and certain accesses denied by the devices cgroup were
permitted (if they matched the wrong major device number).
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Fixes: 6b855f7b83 ("drm/amdkfd: Check against device cgroup")
Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Currently pointer pdd is being dereferenced when assigning pointer
dpm and then pdd is being null checked. Fix this by checking if
pdd is null before the dereference of pdd occurs.
Addresses-Coverity: ("Dereference before null check")
Fixes: 32cb59f313 ("drm/amdkfd: Track SDMA utilization per process")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC 10 was complaining about how we append data to a buffer using snprintf:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c: In function ‘perf_show’:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:214:3: warning: ‘snprintf’ argument 4 overlaps destination object ‘buf’ [-Wrestrict]
214 | snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch fixes the warnings and makes the sysfs code more efficient
by remembering the offset in the buffer between append operations.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track SDMA usage on a per process basis and report it through sysfs.
The value in the sysfs file indicates the amount of time SDMA has
been in-use by this process since the creation of the process.
This value is in microsecond granularity.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the PCI bus number retrieved by PCI_BUS_NUM(pdev->devfn)
is wrong.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return statements in functions returning bool should use
true/false instead of 1/0.
drivers/gpu/drm/amd/amdkfd/kfd_int_process_v9.c:40:9-10:
WARNING: return of 0/1 in function 'event_interrupt_isr_v9' with return type bool
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The queue mask used for set_resources always assumes the queue number
per pipe is 8, so KFD needs to align with that by using function
amdgpu_queue_mask_bit_to_set_resource_bit().
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corrected two function names. Added a missing space.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCI domain has moved to 32-bits to accommodate virtualization,
so a 32-bit integer is exposed for domain to reflect this change.
Domain can be found in here:
/sys/class/kfd/kfd/topology/nodes/X/properties
Where X is the card number
Signed-off-by: Ori Messinger <ori.messinger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track GPU VRAM usage on a per process basis and report it through
sysfs.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current GWS usage model will only allows a single GWS-enabled
process to be active on the GPU at once. This ensures that a
barrier-using kernel gets a known amount of GPU hardware, to
prevent deadlock due to inability to go beyond the GWS barrier.
The HWS watches how many GWS entries are assigned to each process,
and goes into over-subscription mode when two processes need more
than the 64 that are available. The current KFD method for working
with this is to allocate all 64 GWS entries to each GWS-capable
process.
When more than one GWS-enabled process is in the runlist, we must
make sure the runlist is in over-subscription mode, so that the
HWS gets a chained RUN_LIST packet and continues scheduling
kernels.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than only enabling GWS support based on the hws_gws_support
modparm, also check whether the GPU's HWS firmware supports GWS.
Leave the old modparm in place in case users want to test GWS
on GPUs not yet in the support list.
v2: fix broken syntax from the first patch.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new kfd ioctl to allocate queue GWS. Queue
GWS is released on queue destroy.
v2: re-introduce this API with the following fixes squashed in:
- drm/amdkfd: fix null pointer dereference on dev
- drm/amdkfd: Return proper error code for gws alloc API
- drm/amdkfd: Remove GPU ID in GWS queue creation
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to surface the ASIC revision to user level, we want
to put it into the HSA topology. This can be because different
ASIC revisions may require user-level software to do different
things (e.g. patch code for things that are changed in later
hardware revisions).
The ASIC revision from the hardware is maximum of 4 bits at this
time, so put it into 4 of the open bits in the HSA capability.
Then user-level software can use this capability information to
know -- for each ASIC -- what revision-based things must be done.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete two printings which are not very useful, and change one from
pr_info() to pr_debug().
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Original cgroup v2 eBPF code for filtering device access made it
possible to compile with CONFIG_CGROUP_DEVICE=n and still use the eBPF
filtering. Change
commit 4b7d4d453f ("device_cgroup: Export devcgroup_check_permission")
reverted this, making it required to set it to y.
Since the device filtering (and all the docs) for cgroup v2 is no longer
a "device controller" like it was in v1, someone might compile their
kernel with CONFIG_CGROUP_DEVICE=n. Then (for linux 5.5+) the eBPF
filter will not be invoked, and all processes will be allowed access
to all devices, no matter what the eBPF filter says.
Signed-off-by: Odin Ugedal <odin@ugedal.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Originally, it kfrees the wrong pointer for mem_obj.
It would cause memory leak under stress test.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are spelling mistakes in pr_err messages and a comment. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ALLOC_MEM_FLAGS_* used are the same as the KFD_IOC_ALLOC_MEM_FLAGS_*,
but they are interweavedly used in kernel driver, resulting in bad
readability. For example, KFD_IOC_ALLOC_MEM_FLAGS_COHERENT is not
referenced in kernel, and it functions implicitly in kernel through
ALLOC_MEM_FLAGS_COHERENT, causing unnecessary confusion.
Replace all occurrences of ALLOC_MEM_FLAGS_* with
KFD_IOC_ALLOC_MEM_FLAGS_* to solve the problem.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
People are inclined to think of the previous pr_warn message as an
error, so use pre_debug instead.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise BOs may wait for the fence indefinitely and never be destroyed.
v2: Signal the fence right after destroying queues to avoid unnecessary
delaye-delete in kfd_process_wq_release
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because too many things are involved in this workaround, we need more
comments to avoid pitfalls.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a statement that is indented with spaces instead of a tab.
Replace spaces with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA MQD memory type is NC that causes MQD data overwritten
accidentally by an old stable cache line. Changing it to UC
default for GART will fix the issue.
The mqd_gfx9 parameter is meant for control stacks that are
allocated together with user mode queue MQDs. Setting
mqd_gfx9 to true maps the control stack pages as NC.
Here it was accidentally applied to SDMA MQDs,
which are allocated together with the HIQ MQD. Setting
the mqd_gfx9 to false avoids that.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Given we can query all the asic specific information from amdgpu_gfx_config,
we can make get_tile_config() generic.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous way of using SDMA queue count to infer whether we should unmap
SDMA engines has bugs. The reason it did not cause issues is because MEC
firmware unmaps all queues (CP + SDMA) when a unmap package for compute
engine is received. Becasue of that, only one unmap queue package
is needed, instead of one unmap queue package for CP and each SDMA engine,
which results in much simpler driver code.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those printings are duplicated or useless.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the queue creation failed, some resources were not freed. Fix it.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous code of calculating active CP queues is problematic if
some SDMA queues are inactive. Fix that by counting CP queues directly.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The queues represented in queue_bitmap are only CP queues.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The name is easier to understand the code.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Devices from Arcturus onwards will have their UUID exposed to Thunk.
Adding neccessary functions to the kernel to propagate the uuid.
Signed-off-by: Divya Shikre <DivyaUday.Shikre@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So far the kfd driver implemented same routines for runtime and system
wide suspend and resume (s2idle or mem). During system wide suspend the
kfd aquires an atomic lock that prevents any more user processes to
create queues and interact with kfd driver and amd gpu. This mechanism
created problem when amdgpu device is runtime suspended with BACO
enabled. Any application that relies on kfd driver fails to load because
the driver reports a locked kfd device since gpu is runtime suspended.
However, in an ideal case, when gpu is runtime suspended the kfd driver
should be able to:
- auto resume amdgpu driver whenever a client requests compute service
- prevent runtime suspend for amdgpu while kfd is in use
This change refactors the amdgpu and amdkfd drivers to support BACO and
runtime power management.
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During system suspend the kfd driver aquires a lock that prohibits
further kfd actions unless the gpu is resumed. This adds some info which
can be useful while debugging.
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Provide compute queues information in sysfs under /sys/class/kfd/kfd/proc.
The format is /sys/class/kfd/kfd/proc/<pid>/queues/<queue id>/XX where
XX are size, type, and gpuid three files to represent queue size, queue
type, and the GPU this queue uses. <queue id> folder and files underneath
are generated when a queue is created. They are removed when the queue is
destroyed.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sdma_queue_count increment should be done before
execute_queues_cpsch(), which calls pm_calc_rlib_size() where
sdma_queue_count is used to calculate whether over_subscription is
triggered.
With the previous code, when a SDMA queue is created,
compute_queue_count in pm_calc_rlib_size() is one more than the
actual compute queue number, because the queue_count has been
incremented while sdma_queue_count has not. This patch fixes that.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SW scheduler is previously called non HW scheduler, or non HWS. This
message is useful when triaging issues from dmesg.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To align with gfx v9, we use the map_queues packet to load hiq MQD.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is an issue that CP will check the HIQ queue to be configured and mapped
with KIQ ring, otherwise, it will be unable to read back the secure buffer while
the gfxoff is enabled even with trusted IP blocks.
v1 -> v2:
- Fix to remove surplus set_resources packets.
- Fill the whole configuration in MQD.
- Change the author as Aaron because he addressed the key point of this issue.
- Add kiq ring lock.
v2 -> v3:
- Free the lock while in error return case.
- Remove the programming only needed by the queue is unmapped.
v3 -> v4:
- Remove doorbell programming because it's used for restarting queue.
- Remove CP scheduler programming because map_queue packet will handle this.
v4 -> v5:
- Remove cp_hqd_active because mec ucode will enable it while use map_queues.
- Revise goto out_unlock.
- Correct the right doorbell offset for HIQ that kfd driver assigned in the
packet.
v5 -> v6:
- Merge Arcturus fix into this patch because it will get oops in Arcturus
platform.
Reported-by: Lisa Saturday <Lisa.Saturday@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-and-Tested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
TLB flush method has been deprecated using kfd2kgd interface.
This implementation is now on the amdgpu_amdkfd API.
[How]
TLB flush functions now implemented in amdgpu_amdkfd.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use filep->private_data to store a pointer to the kfd_process data
structure. Take an extra reference for that, which gets released in
the kfd_release callback. Check that the process calling kfd_ioctl
is the same that opened the file descriptor. Return -EBADF if it's
not, so that this error can be distinguished in user mode.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't use the HWS if it's known to be hanging. In a reset also
don't try to destroy the HIQ because that may hang on SRIOV if the
KIQ is unresponsive.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move HWS hang detection into unmap_queues_cpsch to catch hangs in all
cases. If this happens during a reset, don't schedule another reset
because the reset already in progress is expected to take care of it.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dqm->pipeline_mem wasn't used anywhere.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reading from /sys/kernel/debug/kfd/hang_hws would cause a kernel
oops because we didn't implement a read callback. Set the permission
to write-only to prevent that.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thunk driver would like to know the num_cp_queues data, however this data relied
on different asic specific. So it's better to get it from kfd driver.
v2: don't update name size.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thunk driver would like to know the num_sdma_queues_per_engine data, however
this data relied on different asic specific. So it's better to get it from kfd
driver.
v2: don't update the name size.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because queue_work schedule the work on the same CPU the interrupt
handler is running, if there are many interrupts pending, it takes
longer time for work queue to start, or even worse system will hang.
v2: queue work to same NUMA node for better cache locality
v3: handle cpumask_next wraparound case
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-next-5.6-2019-12-11:
amdgpu:
- Add MST atomic routines
- Add support for DMCUB (new helper microengine for displays)
- Add OEM i2c support in DC
- Use vstartup for vblank events on DCN
- Simplify Kconfig for DC
- Renoir fixes for DC
- Clean up function pointers in DC
- Initial support for HDCP 2.x
- Misc code cleanups
- GFX10 fixes
- Rework JPEG engine handling for VCN
- Add clock and power gating support for JPEG
- BACO support for Arcturus
- Cleanup PSP ring handling
- Add framework for using BACO with runtime pm to save power
- Move core pci state handling out of the driver for pm ops
- Allow guest power control in 1 VF case with SR-IOV
- SR-IOV fixes
- RAS fixes
- Support for power metrics on renoir
- Golden settings updates for gfx10
- Enable gfxoff on supported navi10 skus
- Update MAINTAINERS
amdkfd:
- Clean up generational gfx code
- Fixes for gfx10
- DIQ fixes
- Share more code with amdgpu
radeon:
- PPC DMA fix
- Register checker fixes for r1xx/r2xx
- Misc cleanups
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211223020.7510-1-alexander.deucher@amd.com
drm-fixes-5.5-2019-12-12:
amdgpu:
- DC fixes for renoir
- Gfx8 fence flush align with mesa
- Power profile fix for arcturus
- Freesync fix
- DC I2c over aux fix
- DC aux defer fix
- GPU reset fix
- GPUVM invalidation semaphore fixes for PCO and SR-IOV
- Golden settings updates for gfx10
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212223211.8034-1-alexander.deucher@amd.com
amdgpu is MIT licensed.
Fixes: ec8f24b7fa ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu is MIT licensed.
Fixes: ec8f24b7fa ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting
-----BEGIN PGP SIGNATURE-----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=3cs2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"Rob pointed out I missed his pull request for msm-next, it's been in
next for a while outside of my tree so shouldn't cause any unexpected
issues, it has some OCMEM support in drivers/soc that is acked by
other maintainers as it's outside my tree.
Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
some tegra, omap, mgag200 and one core fix.
Summary:
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting"
* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
drm/omap: fix dma_addr refcounting
drm/tegra: Run hub cleanup on ->remove()
drm/tegra: sor: Make the +5V HDMI supply optional
drm/tegra: Silence expected errors on IOMMU attach
drm/tegra: vic: Export module device table
drm/tegra: sor: Implement system suspend/resume
drm/tegra: Use proper IOVA address for cursor image
drm/tegra: gem: Remove premature import restrictions
drm/tegra: gem: Properly pin imported buffers
drm/tegra: hub: Remove bogus connection mutex check
ia64: agp: Replace empty define with do while
agp: Add bridge parameter documentation
agp: remove unused variable num_segments
agp: move AGPGART_MINOR to include/linux/miscdevice.h
agp: remove unused variable size in agp_generic_create_gatt_table
drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
drm/radeon: fix r1xx/r2xx register checker for POT textures
drm/amdgpu: fix GFX10 missing CSIB set(v3)
drm/amdgpu: should stop GFX ring in hw_fini
...
Up to this point, those functions are all the same for all ASICs, so
no need to call them by functions pointers. Removing the function
pointers will greatly increase the code readablity. If there is ever
need for those function pointers, we can add it back then.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
KFD has been verified to function on POWER systems (Talos II / Vega 64).
It should be available as a kernel configuration option on these systems.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFD has been verified to function on POWER systems (Talos II / Vega 64).
It should be available as a kernel configuration option on these systems.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The functions are the same as update_mqd().
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the mqd_diq_sdma buffer, there should be only one HIQ mqd. All DIQs
should be allocated somewhere else using the regular way.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is the same as KFD_MQD_TYPE_CP, so delete it. As a result, we will
have one less mqd mananger per device.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdkfd/kfd_iommu.c: In function kfd_iommu_device_init:
drivers/gpu/drm/amd/amdkfd/kfd_iommu.c:65:30: warning: variable top_dev set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1ae99eab34 ("drm/amdkfd: Initialize HSA_CAP_ATS_PRESENT capability in topology codes")
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After the recent cleanup, the functionalities provided by the previous
kfd_kernel_queue_*.c are actually all packet manager related. So rename
them to reflect that.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ops_asic_specific function pointers are actually quite generic after
using a simple if condition. Eliminate it by code refactoring.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The only difference that CIK kernel queue functions are different from
VI is avoid allocating eop_mem. We can achieve that by using a if
condition.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdkfd/kfd_device.c: In function
‘kgd2kfd_post_reset’:
drivers/gpu/drm/amd/amdkfd/kfd_device.c:745:11: warning:
variable ‘count’ set but not used [-Wunused-but-set-variable]
'count' is never used, so can be removed. Thus 'atomic_dec_return'
can be replaced as 'atomic_dec'
Fixes: e42051d213 ("drm/amdkfd: Implement GPU reset handlers in KFD")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is done for other GFX in commit bb2d2128a5. Port it to GFX10.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
workgroup context data writes from m->cp_hqd_cntl_stack_size, so we
should deduct it when calculating the used size.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Given control stack is now in the userspace context save restore area
on GFX10, the same as GFX8, it is not needed to copy it back to userspace.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ported from gfx9.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
create_cp_queue() could also work with SDMA queues, so we should rename
it. It only initialize the data values rather than creating queues.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dorbell_off in the queue properties is mainly used for the doorbell dw
offset in pci bar. We should not set it to the doorbell byte offset in
process doorbell pages. This makes the code much easier to read.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The doorbell offset could mean the byte offset or the dword offset,
and the 0 offset place is also different, sometimes the start of PCI
doorbell bar or the start of process doorbell pages. Use better name
to avoid confusion.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new code uses straightforward bit shifts and thus has better readability.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kernel queue functions for v9 and v10 are the same except
pm_map_process_v* which have small difference, so they should be reused.
This eliminates the need of reapplying several patches which were
applied on v9 but not on v10, such as bigger GWS and more than 2
SDMA engine support which were introduced on Arcturus.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
release_mem is only used for Hawaii, but because GFX7 and GFX8 share the
same function pointer structure, so we only delete release_mem for GFX9
and GFX10.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is cleaner.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bitmap in cu_info structure is defined as a 4x4 size array. In
Acturus, this matrix is initialized as a 4x2. Based on the 8 shaders.
In the gpu cache filling initialization, the access to the bitmap matrix
was done as an 8x1 instead of 4x2. Causing an out of bounds memory
access error.
Due to this, the number of GPU cache entries was inconsistent.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If device reset/suspend/resume failed for some reason, dqm lock is
hold forever and this causes deadlock. Below is a kernel backtrace when
application open kfd after suspend/resume failed.
Instead of holding dqm lock in pre_reset and releasing dqm lock in
post_reset, add dqm->sched_running flag which is modified in
dqm->ops.start and dqm->ops.stop. The flag doesn't need lock protection
because write/read are all inside dqm lock.
For HWS case, map_queues_cpsch and unmap_queues_cpsch checks
sched_running flag before sending the updated runlist.
v2: For no-HWS case, when device is stopped, don't call
load/destroy_mqd for eviction, restore and create queue, and avoid
debugfs dump hdqs.
Backtrace of dqm lock deadlock:
[Thu Oct 17 16:43:37 2019] INFO: task rocminfo:3024 blocked for more
than 120 seconds.
[Thu Oct 17 16:43:37 2019] Not tainted
5.0.0-rc1-kfd-compute-rocm-dkms-no-npi-1131 #1
[Thu Oct 17 16:43:37 2019] "echo 0 >
/proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Thu Oct 17 16:43:37 2019] rocminfo D 0 3024 2947
0x80000000
[Thu Oct 17 16:43:37 2019] Call Trace:
[Thu Oct 17 16:43:37 2019] ? __schedule+0x3d9/0x8a0
[Thu Oct 17 16:43:37 2019] schedule+0x32/0x70
[Thu Oct 17 16:43:37 2019] schedule_preempt_disabled+0xa/0x10
[Thu Oct 17 16:43:37 2019] __mutex_lock.isra.9+0x1e3/0x4e0
[Thu Oct 17 16:43:37 2019] ? __call_srcu+0x264/0x3b0
[Thu Oct 17 16:43:37 2019] ? process_termination_cpsch+0x24/0x2f0
[amdgpu]
[Thu Oct 17 16:43:37 2019] process_termination_cpsch+0x24/0x2f0
[amdgpu]
[Thu Oct 17 16:43:37 2019]
kfd_process_dequeue_from_all_devices+0x42/0x60 [amdgpu]
[Thu Oct 17 16:43:37 2019] kfd_process_notifier_release+0x1be/0x220
[amdgpu]
[Thu Oct 17 16:43:37 2019] __mmu_notifier_release+0x3e/0xc0
[Thu Oct 17 16:43:37 2019] exit_mmap+0x160/0x1a0
[Thu Oct 17 16:43:37 2019] ? __handle_mm_fault+0xba3/0x1200
[Thu Oct 17 16:43:37 2019] ? exit_robust_list+0x5a/0x110
[Thu Oct 17 16:43:37 2019] mmput+0x4a/0x120
[Thu Oct 17 16:43:37 2019] do_exit+0x284/0xb20
[Thu Oct 17 16:43:37 2019] ? handle_mm_fault+0xfa/0x200
[Thu Oct 17 16:43:37 2019] do_group_exit+0x3a/0xa0
[Thu Oct 17 16:43:37 2019] __x64_sys_exit_group+0x14/0x20
[Thu Oct 17 16:43:37 2019] do_syscall_64+0x4f/0x100
[Thu Oct 17 16:43:37 2019] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-next-5.5-2019-10-09:
amdgpu:
- Additional RAS enablement for vega20
- RAS page retirement and bad page storage in EEPROM
- No GPU reset with unrecoverable RAS errors
- Reserve vram for page tables rather than trying to evict
- Fix issues with GPU reset and xgmi hives
- DC i2c over aux fixes
- Direct submission for clears, PTE/PDE updates
- Improvements to help support recoverable GPU page faults
- Silence harmless SAD block messages
- Clean up code for creating a bo at a fixed location
- Initial DC HDCP support
- Lots of documentation fixes
- GPU reset for renoir
- Add IH clockgating support for soc15 asics
- Powerplay improvements
- DC MST cleanups
- Add support for MSI-X
- Misc cleanups and bug fixes
amdkfd:
- Query KFD device info by asic type rather than pci ids
- Add navi14 support
- Add renoir support
- Add navi12 support
- gfx10 trap handler improvements
- pasid cleanups
- Check against device cgroup
ttm:
- Return -EBUSY with pipelining with no_gpu_wait
radeon:
- Silence harmless SAD block messages
device_cgroup:
- Export devcgroup_check_permission
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010041713.3412-1-alexander.deucher@amd.com
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Participate in device cgroup. All kfd devices are exposed via /dev/kfd.
So use /dev/dri/renderN node.
Before exposing the device to a task check if it has permission to
access it. If the task (based on its cgroup) can access /dev/dri/renderN
then expose the device via kfd node.
If the task cannot access /dev/dri/renderN then process device data
(pdd) is not created. This will ensure that task cannot use the device.
In sysfs topology, all device nodes are visible irrespective of the task
cgroup. The sysfs node directories are created at driver load time and
cannot be changed dynamically. However, access to information inside
nodes is controlled based on the task's cgroup permissions.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add proper ifdefs around CIK code in kfd setup.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the current code if "device_info" is ever NULL then the kernel will
Oops so probably || was intended instead of &&.
Fixes: e392c887df ("drm/amdkfd: Use array to probe kfd2kgd_calls")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Function kgd2kfd_init is missing a void argument, add it
to clean up the non-ANSI function declaration.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously only PCIe-optimized SDMA engine hqds were
exposed in debug fs. Print all SDMA engine hqds.
Reported-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On device initialization, a chunk of GTT memory is pre-allocated for
HIQ and all SDMA queues mqd. The size of this allocation was wrong.
The correct sdma engine number should be PCIe-optimized SDMA engine
number plus xgmi SDMA engine number.
Reported-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The code use hex define, so should the printing.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the same idea as the kfd device info probe and move all the
probe control together for easy maintenance.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing synchronization with VGPR restore leads to intermittent
VGPR trashing in the user shader.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_atc_vmid_pasid_mapping_valid() is very similar to
get_atc_vmid_pasid_mapping_pasid(), so they can be merged into a new
function get_atc_vmid_pasid_mapping_info() to reduce register access
times. More importantly, getting the PASID and the valid bit atomically
with a single read fixes some potential race conditions where the
mapping changes between the two reads.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because we record the mapping under non HWS mode in the software,
we can query pasid through vmid using the stored mapping instead of
reading from ATC registers.
This also prepares for the defeatured ATC block in future ASICs.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes possible the vmid pasid mapping query through software.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since KFD pasid starts from 0x8000 (32768 in decimal), it is better
perceived as a hex number. Meanwhile, change the pasid type from
unsigned int to uint16_t to be consistent throughout the code.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GFX10 does not require the control stack to be right after mqd
buffer any more, so move it back to usersapce allocated CSWR buffer.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd needs drm_device to call into drm_cgroup functions
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is required to check against cgroup permissions.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep the same use of CHIP_IDs for navi12 in kfd
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add device info for both navi12 PF and VF
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently this function pointer is missing for GFX10. Considering it is
a void function since GFX9, fix it by checking the function pointer
before dereferencing it.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The packet manager is not needed for non HWS mode except Hawaii, so only
initialize it for Hawaii under non HWS mode. This will simplify debugging
under non HWS mode for all new asics, because it eliminates one variable
out of the equation in non HWS mode
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dozens of printing messages are compressed into 2 lines.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.
v2 (Felix Kuehling):
* Fix compile error (kfifo_free instead of fifo_free)
* Return proper error code
Signed-off-by: Allen Pais <allen.pais@oracle.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were deleted before, but somehow showed up again. Delete them again.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core:
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
panfrost:
- Multiple panfrost fixes for regulator support and page fault handling
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJdjZr6AAoJEAx081l5xIa+nboP+gPWzx45Q3IsbnaZmcdFTFEf
+/XgScoFcv5Uhd3aXtrSYDvPnSyNXpGsV5ccE/FtxNd4G75n20tPFxGNhjzyXfdc
B2x1IRgc82W1KxYwwDlmd+f/86h6uthFkh1ToKN3hsHWNm8Wu8AgoJnoWvqwluf9
natSFnQPQIvcADpbpyk8FiNcXvMg0qrKQ8aj3uPxqUs4/ftigzez+5vYJOkktoEJ
NFtlouVvIZejVo6l4Q5ebXXsol7On02iHUszpdJtb5FxMcBQwAafewCGln2622cA
8ooWmekZNtoHUH3WmUlrs7TqPKtoOqIEkMO8UvCJDwBB4/ft8sJRPDKFgk547E/8
Htv6MZXCSOT+/XxebM/wHijOg3MQVjPzO9s73YSmkytzGZVQ/Fgohl/6W+bN/xAm
j/huS5ZozengAldFJHG4wruSk820Vzx736x2pk+9sbpf7PdFDIpuZus8U8wHc411
hu3S2397IxyX4XswLg8BTaIOhCXwT7CluQ9mYD1THPgRzG5YPha8JelTcwwlVsD9
2Cw6mCUAqydHHMboWQnEhRXhuhVfGlPAdJTsdyoI6zdXYqU/ThihJPBgG0wSq0y0
fAsj/9NRqSzg6hk9vm1QdCeOthKOuAZ0PgLcVHI1RNSwEyrN8yOupVwe7+Mn+q2z
UNbfr2qXGqKxn6rqUy2W
=yCyF
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes built up over the past 1.5 weeks or so, it's two weeks of
amdgpu, some core cleanups and some panfrost fixes. I also finally
figured out why my desktop was slow to do a bunch of stuff (someone
gave it an IPv6 address which can't reach anything!).
core:
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
panfrost:
- Multiple panfrost fixes for regulator support and page fault
handling"
* tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/amd/display: prevent memory leak
drm/amdgpu/gfx10: add support for wks firmware loading
drm/amdgpu/display: include slab.h in dcn21_resource.c
drm/amdgpu/display: fix 64 bit divide
drm/panfrost: Prevent race when handling page fault
drm/panfrost: Remove NULL checks for regulator
drm/panfrost: Fix regulator_get_optional() misuse
drm: Measure Self Refresh Entry/Exit times to avoid thrashing
drm: Fix kerneldoc and remove unused struct member in self_refresh helper
drm/atomic: Rename crtc_state->pageflip_flags to async_flip
drm/atomic: Reject FLIP_ASYNC unconditionally
drm/atomic: Take the atomic toys away from X
drm/amdgpu: flag navi12 and 14 as experimental for 5.4
drm/kms: Duct-tape for mode object lifetime checks
drm/amdgpu: add navi12 pci id
drm/amdgpu: add navi14 PCI ID for work station SKU
drm/amdkfd: Swap trap temporary registers in gfx10 trap handler
drm/amd/powerplay: implement sysfs for getting dpm clock
drm/amd/display: Restore backlight brightness after system resume
drm/amd/display: Implement voltage limitation for dali
...
This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a cleanup
to the page walker API and a few memremap related changes round out the
series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of drivers by
using a refcount get/put attachment idiom and remove the convoluted
mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its only
user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without providing
a struct device
- Make walk_page_range() and related use a constant structure for function
pointers
-----BEGIN PGP SIGNATURE-----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=FRGg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a
cleanup to the page walker API and a few memremap related changes
round out the series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
and make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of
drivers by using a refcount get/put attachment idiom and remove the
convoluted mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its
only user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without
providing a struct device
- Make walk_page_range() and related use a constant structure for
function pointers"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
libnvdimm: Enable unit test infrastructure compile checks
mm, notifier: Catch sleeping/blocking for !blockable
kernel.h: Add non_block_start/end()
drm/radeon: guard against calling an unpaired radeon_mn_unregister()
csky: add missing brackets in a macro for tlb.h
pagewalk: use lockdep_assert_held for locking validation
pagewalk: separate function pointers from iterator data
mm: split out a new pagewalk.h header from mm.h
mm/mmu_notifiers: annotate with might_sleep()
mm/mmu_notifiers: prime lockdep
mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
mm/hmm: hmm_range_fault() infinite loop
mm/hmm: hmm_range_fault() NULL pointer bug
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
mm/mmu_notifiers: remove unregister_no_release
RDMA/odp: remove ib_ucontext from ib_umem
RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
...
-----BEGIN PGP SIGNATURE-----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=5CRH
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main pull request for 5.4-rc1 merge window. I don't think
there is anything outstanding so next week should just be fixes, but
we'll see if I missed anything. I landed some fixes earlier in the
week but got delayed writing summary and sending it out, due to a mix
of sick kid and jetlag!
There are some fixes pending, but I'd rather get the main merge out of
the way instead of delaying it longer.
It's also pretty large in commit count and new amd header file size.
The largest thing is four new amdgpu products (navi12/14, arcturus and
renoir APU support).
Otherwise it's pretty much lots of work across the board, i915 has
started landing tigerlake support, lots of icelake fixes and lots of
locking reworking for future gpu support, lots of header file rework
(drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
put into the places they are needed.
uapi:
- content protection type property for HDCP
core:
- rework include dependencies
- lots of drmP.h removals
- link rate calculation robustness fix
- make fb helper map only when required
- add connector->DDC adapter link
- DRM_WAIT_ON removed
- drop DRM_AUTH usage from drivers
dma-buf:
- reservation object fence helper
dma-fence:
- shrink dma_fence struct
- merge signal functions
- store timestamps in dma_fence
- selftests
ttm:
- embed drm_get_object struct into ttm_buffer_object
- release_notify callback
bridges:
- sii902x - audio graph card support
- tc358767 - aux data handling rework
- ti-snd64dsi86 - debugfs support, DSI mode flags support
panels:
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
Himax8279d, Sharp LD-D5116Z01B
- TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1
i915:
- Initial tigerlake platform support
- Locking simplification work, general all over refactoring.
- Selftests
- HDCP debug info improvements
- DSI properties
- Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
suspend/resume
- GuC fixes
- Perf fixes
- ElkhartLake enablement
- DP MST fixes
- GVT - command parser enhancements
amdgpu:
- add wipe memory on release flag for buffer creation
- Navi12/14 support (may be marked experimental)
- Arcturus support
- Renoir APU support
- mclk DPM for Navi
- DC display fixes
- Raven scatter/gather support
- RAS support for GFX
- Navi12 + Arcturus power features
- GPU reset for Picasso
- smu11 i2c controller support
amdkfd:
- navi12/14 support
- Arcturus support
radeon:
- kexec fix
nouveau:
- improved display color management
- detect lack of GPU power cables
vmwgfx:
- evicition priority support
- remove unused security feature
msm:
- msm8998 display support
- better async commit support for cursor updates
etnaviv:
- per-process address space support
- performance counter fixes
- softpin support
mcde:
- DCS transfers fix
exynos:
- drmP.h cleanup
lima:
- reduce logging
kirin:
- misc clenaups
komeda:
- dual-link support
- DT memory regions
hisilicon:
- misc fixes
imx:
- IPUv3 image converter fixes
- 32-bit RGB V4L2 pixel format support
ingenic:
- more support for panel related cases
mgag200:
- cursor support fix
panfrost:
- export GPU features register to userspace
- gpu heap allocations
- per-fd address space support
pl111:
- CLD pads wiring support removed from DT
rockchip:
- rework to use DRM PSR helpers
- fix bug in VOP_WIN_GET macro
- DSI DT binding rework
sun4i:
- improve support for color encoding and range
- DDC enabled GPIO
tinydrm:
- rework SPI support
- improve MIPI-DBI support
- moved to drm/tiny
vkms:
- rework CRC tracking
dw-hdmi:
- get_eld and i2s improvements
gm12u320:
- misc fixes
meson:
- global code cleanup
- vpu feature detect
omap:
- alpha/pixel blend mode properties
rcar-du:
- misc fixes"
* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
drm/nouveau: Fix ordering between TTM and GEM release
drm/nouveau/prime: Extend DMA reservation object lock
drm/nouveau: Fix fallout from reservation object rework
drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
drm/i915: to make vgpu ppgtt notificaiton as atomic operation
drm/i915: Flush the existing fence before GGTT read/write
drm/i915: Hold irq-off for the entire fake lock period
drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
drm/i915/gvt: update vgpu workload head pointer correctly
drm/mcde: Fix DSI transfers
drm/msm: Use the correct dma_sync calls harder
drm/msm: remove unlikely() from WARN_ON() conditions
drm/msm/dsi: Fix return value check for clk_get_parent
drm/msm: add atomic traces
drm/msm/dpu: async commit support
drm/msm: async commit support
drm/msm: split power control from prepare/complete_commit
drm/msm: add kms->flush_commit()
...
ttmp[4:5] hold information useful to the debugger. Use ttmp[14:15]
instead, aligning implementation with gfx9 trap handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttmp[4:5] hold information useful to the debugger. Use ttmp[14:15]
instead, aligning implementation with gfx9 trap handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds renoir kfd topology which is the same with Raven.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir is the same with Raven, will enable iommu event in future.
v2: fix the checking (Thong)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch inits renoir kfd device info, so we treat renoir as "dgpu"
(bypass iommu v2). Will enable needs_iommu_device till renoir iommu is ready.
v2: rebase and align the drm-next
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir's cache info should be the same with raven and carrizo's.
v2: fix missed "break"
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initial support of Navi14 in KFD. The device IDs will be added later.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The issue was accidentally introduced recently.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This optimizes out the pci device id usage in KFD and makes the code
more maintainable.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the virtual function PCI device id.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix sparse warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device_queue_manager.c:1846:6:
warning: symbol 'deallocate_hiq_sdma_mqd' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c: In function restore_process_worker:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:949:29: warning:
variable pdd set but not used [-Wunused-but-set-variable]
It is not used since
commit 5b87245faf ("drm/amdkfd: Simplify kfd2kgd interface")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The name field in node topology has not been used. We re-purpose it to
hold the asic name, which can be queried by user space applications
through sysfs.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From rdma.git
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies, and is being taken
into hmm.git due to dependencies in the next patches.
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The sequence of mmu_notifier_unregister_no_release(),
mmu_notifier_call_srcu() is identical to mmu_notifier_put() with the
free_notifier callback.
As this is the last user of those APIs, converting it means we can drop
them.
Link: https://lore.kernel.org/r/20190806231548.25242-11-jgg@ziepe.ca
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When using mmu_notifer_unregister_no_release() the caller must ensure
there is a SRCU synchronize before the mn memory is freed, otherwise use
after free races are possible, for instance:
CPU0 CPU1
invalidate_range_start
hlist_for_each_entry_rcu(..)
mmu_notifier_unregister_no_release(&p->mn)
kfree(mn)
if (mn->ops->invalidate_range_end)
The error unwind in amdkfd misses the SRCU synchronization.
amdkfd keeps the kfd_process around until the mm is released, so split the
flow to fully initialize the kfd_process and register it for find_process,
and with the notifier. Past this point the kfd_process does not need to be
cleaned up as it is fully ready.
The final failable step does a vm_mmap() and does not seem to impact the
kfd_process global state. Since it also cannot be undone (and already has
problems with undo if it internally fails), it has to be last.
This way we don't have to try to unwind the mmu_notifier_register() and
avoid the problem with the SRCU.
Along the way this also fixes various other error unwind bugs in the flow.
Fixes: 45102048f7 ("amdkfd: Add process queue manager module")
Link: https://lore.kernel.org/r/20190806231548.25242-10-jgg@ziepe.ca
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The amdgpu_task_info will be used when printing VM page fault for KFD
processes.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanatha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1a058c3376.
This interface is still in too much flux. Revert until
it's sorted out.
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Following bitmap layout logic introduced by:
"drm/amdgpu: support get_cu_info for Arcturus".
v2: squash in fixup for gfx_v9_0.c (Alex)
v3: squash in debug print output fix
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCC moved out of user SGPR allocation in gfx10. It's now stored
in SGPRs 106-107.
Also fixes incorrect SGPR read offsets.
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These moved from SGPRs in gfx9 to HWREG in gfx10.
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy/paste error, first 4 VGPRs are separated by 64 dwords (256 bytes).
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously submitted code was taken from an incorrect branch and
was non-functional.
Cc: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-By: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the trap is entered due to MODE.DEBUG_EN=1 and SAVECTX is raised
concurrently the handler cannot identify the source of the exception.
This causes the debugger to lose single step exception notification
when a context save request arrives at the same time.
When MODE.DEBUG_EN=1 and STATUS.HALT=0 (exception not already handled)
jump to the second-level trap handler upon entering the trap. The
second-level trap will set STATUS.HALT=1 and return to the shader.
If SAVECTX was raised then control flow will return to the trap, which
will then handle the context save request.
Cc: Tony Tye <tony.tye@amd.com>
Cc: Laurent Morichetti <laurent.morichetti@amd.com>
Cc: Qingchuan Shi <qingchuan.shi@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a wavefront raises TRAPSTS.XNACK_ERROR with STATUS.ALLOW_REPLAY=0
subsequent memory instructions have undefined behavior. In practice
SQC stores continue to work but TCP stores do not.
Context save is permitted to fail after XNACK error because the
wavefront will be halted and subsequently terminated. However the
debugger has an interest in retrieving the wavefront VGPR/LDS state.
Detect the out-of-spec case and use SQC stores during context save
in place of TCP stores.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enabling -Wimplicit-fallthrough, this patch silences
the following warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c: In function ‘mqd_manager_init_v10’:
./include/linux/dynamic_debug.h:122:52: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __dynamic_func_call(id, fmt, func, ...) do { \
^
./include/linux/dynamic_debug.h:143:2: note: in expansion of macro ‘__dynamic_func_call’
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
./include/linux/dynamic_debug.h:153:2: note: in expansion of macro ‘_dynamic_func_call’
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
./include/linux/printk.h:336:2: note: in expansion of macro ‘dynamic_pr_debug’
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c:432:3: note: in expansion of macro ‘pr_debug’
pr_debug("%s@%i\n", __func__, __LINE__);
^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_mqd_manager_v10.c:433:2: note: here
case KFD_MQD_TYPE_COMPUTE:
^~~~
by removing the call to pr_debug() in KFD_MQD_TYPE_CP:
"The mqd init for CP and COMPUTE will have the same routine." [1]
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
[1] https://lore.kernel.org/lkml/c735a1cc-a545-50fb-44e7-c0ad93ee8ee7@amd.com/
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Add missing break statement in order to prevent the code from falling
through to case CHIP_NAVI10.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: 14328aa58c ("drm/amdkfd: Add navi10 support to amdkfd. (v3)")
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
nouveau:
- bugfixes + TU116 enabling (minor iteration):w
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs: fb pitch setup
... plus a new panel quirk
-----BEGIN PGP SIGNATURE-----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=s190
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave is back in shape, but now family got it so I'm doing the pull.
Two things worthy of note:
- nouveau feature pull was way too late, Dave&me decided to not take
that, so Ben spun up a pull with just the fixes.
- after some chatting with the arm display maintainers we decided to
change a bit how that's maintained, for more oversight/review and
cross vendor collab.
More details below:
nouveau:
- bugfixes
- TU116 enabling (minor iteration) :w
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs:
- fb pitch setup
core:
- a new panel quirk
- misc fixes"
* tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits)
drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug
drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP
drm/nouveau: fix memory leak in nouveau_conn_reset()
drm/nouveau/dmem: missing mutex_lock in error path
drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau/i2c: Enable i2c pads & busses during preinit
drm/nouveau/disp/tu102-: wire up scdc parameter setter
drm/nouveau/core: recognise TU116 chipset
drm/nouveau/kms: disallow dual-link harder if hdmi connection detected
drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling
drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes
drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89.
drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq
drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers
drm/amd/display: Force uclk to max for every state
drm/amdkfd: Remove GWS from process during uninit
drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface
drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware
...
GPU cache info (part of virtual CRAT) size depends on CU number.
For arcturus, CU number has been increased. So the required memory
for vcrat also increases.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ACC VGPRs are a secondary VGPR set of same size as the primary VGPRs.
Save them as a block immediately following VGPRs.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CWSR (compute wave save/restore) is used for
preempting compute queues.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
some sdma engines are optimized for xgmi on arcturus.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the original formula, when sdma queue number is 64,
the left shift overflows. Use an equivalence that won't
overflow.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial support for ARCTURUS to kfd.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend map_process and set_resources pm4 packet to support
bigger gds size for arcturus.
v2: Only make the change for v9
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend map_queue and unmap_queue PM4 packets to support 8
SDMA engines. The new format is backward compatible.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we shut down a process without having destroyed its GWS-using
queues, it is possible that GWS BO will still be in the process
BO list during the gpuvm destruction. This list should be empty
at that time, so we should remove the GWS allocation at the
process uninit point if it is still around.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply the same setting to SH_MEM_CONFIG and VM_CONTEXT1_CNTL. This
makes the noretry param no longer KFD-specific. On GFX10 I'm not
changing SH_MEM_CONFIG in this commit because GFX10 has different
retry behaviour in the SQ and I don't have a way to test it at the
moment.
Suggested-by: Christian König <Christian.Koenig@amd.com>
CC: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by : Shaoyun.liu < Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The cp hang occurs in OCL conformance test only on supermicro
platform which has 40 cores and the test generates 40 threads.
The root cause is race condition in non-protected flags.
The fix is to add flags of is_evicted and is_active(init_mqd())
into protected area.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This works around difficult-to-reproduce soft hangs on oversubscribed
runlists.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New flag to disable an idle runlist optimization that is causing soft
hangs with some diffult-to-reproduce customer workloads. This will
serve as a workaround until the problem can be reproduced and the
root-cause determined.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oversubscription of queues or processes results in poor performance
mostly because HWS blinbly schedules busy and idle queues, resulting
in poor occupancy if many queues are idle.
Let users know with a warning message when transitioning from a
non-oversubscribed to an oversubscribed runlist.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just for cleanup.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since amdgpu has always requested PCIE atomics, kfd don't
need duplicated PCIE atomics enablement. Referring to amdgpu
request result is enough.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In XGMI configuration, more than one asic can be reset at same time,
kfd is able to handle this and no need to trigger the warning
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previous kfd doesn't use gws so this mask was set to 0.
Set it to 64 bit 1s because now kfd can use all 64 gws
resources.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes boot uniformly boottime and tai uniformly clocktai, to
address the remaining oversights.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
KFD (kernel fusion driver) is the kernel driver
for the compute backend for usermode compute
stack.
v2: squash in updates (Alex)
v3: squash in rebase fixes (Alex)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a folder structure to /sys/class/kfd/kfd/ called proc which contains
subfolders, each representing an active KFD process' PID, containing 1
file: pasid.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA queue allocation requires the dqm lock as it modify
the global dqm members. Enclose it in the dqm_lock.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 06b89b38f3.
This fix is not proper. allocate_mqd can't be moved before
allocate_sdma_queue as it depends on q->properties->sdma_id
set in later.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f77dac6cd6.
This fix is not proper. allocate_mqd can't be moved before
allocate_sdma_queue as it depends on q->properties->sdma_id
set in later.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can't have devices that are not completely initialized in kfd topology.
Otherwise it is a race condition when user access not completely
initialized device. This also addresses a kfd_topology_add_device accessing
NULL dqm pointer issue.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move HSA_CAP_ATS_PRESENT initialization logic from kfd iommu codes to
kfd topology codes. This removes kfd_iommu_device_init's dependency
on kfd_topology_add_device. Also remove duplicate code setting the
same.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA queue allocation requires the dqm lock at it modify
the global dqm members. Move up the dqm_lock so sdma
queue allocation is enclosed in the critical section. Move
mqd allocation out of critical section to avoid circular
lock dependency.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a new mqd allocation interface and split the original
init_mqd function into two functions: allocate_mqd and init_mqd.
Also renamed uninit_mqd to free_mqd. This is preparation work to
fix a circular lock dependency.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is prepare work to fix a circular lock dependency.
No logic change
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also calls load_mqd with current->mm struct. The mm
struct is used to read back user wptr of the queue.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't do the same for compute queues
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ported from gfx8, no changes in register setup.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Translate queue priority into pipe priority and write to MQDs.
The priority values are used to perform queue and pipe arbitration.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always mark evicted queues with q->properties.is_evicted = true, even
queues that are inactive for other reason. This simplifies maintaining
the eviction state as it doesn't require updating is_evicted when other
queue activation conditions change.
On the other hand, we now need to check those other queue activation
conditions whenever an evicted queues is restored. To minimize code
duplication, move the queue activation check into a macro so it can be
maintained in one central place.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Cox <Philip.Cox@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New stuff for 5.3:
- Add new thermal sensors for vega asics
- Various RAS fixes
- Add sysfs interface for memory interface utilization
- Use HMM rather than mmu notifier for user pages
- Expose xgmi topology via kfd
- SR-IOV fixes
- Fixes for manual driver reload
- Add unique identifier for vega asics
- Clean up user fence handling with UVD/VCE/VCN blocks
- Convert DC to use core bpc attribute rather than a custom one
- Add GWS support for KFD
- Vega powerplay improvements
- Add CRC support for DCE 12
- SR-IOV support for new security policy
- Various cleanups
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529220944.14464-1-alexander.deucher@amd.com
The pointer dev is set to null yet it is being dereferenced when
checking dev->dqm->sched_policy. Fix this by performing the check
on dev->dqm->sched_policy after dev has been assigned and null
checked. Also remove the redundant null assignment to dev.
Addresses-Coverity: ("Explicit null dereference")
Fixes: 1a058c3376 ("drm/amdkfd: New IOCTL to allocate queue GWS")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a field in map_queues packet to indicate whether
this is a gws control queue. Only one queue per process
can be gws control queue. Change num_gws field in
map_process packet to 7 bits
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new kfd ioctl to allocate queue GWS. Queue
GWS is released on queue destroy.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add functions in process queue manager to
set/unset queue gws. Also set process's number
of gws used. Currently only one queue in
process can use and use all gws.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On device initialization, KFD allocates all (64) gws which
is shared by all KFD processes.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_amdkfd interface to get num_gws and add num_gws
to /sys/class/kfd/kfd/topology/nodes/x/properties. Only report
num_gws if MEC FW support GWS barriers. Currently it is
determined by a module parameter which will be replaced
with MEC FW version check when firmware is ready.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TTM doesn't support CPU mapping of sg type bo (under which
mmio bo is created). Switch mmaping of mmio page to kfd
device file.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A multi-socket server can have multiple PCIe segments so BFD is not enough
to distingush each GPU. Also add domain number into account when generating
gpu_id.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the VegaM information to KFD
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a circular lock dependency exposed under userptr memory pressure.
The DQM lock is the only one taken inside the MMU notifier. We need
to make sure that no reclaim is done under this lock, and that
no other locks are taken under which reclaim is possible.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alloc format was never really supported by MEC FW. FW always
does one per pipe allocation.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose available numbers of both SDMA queue types in the topology.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Existing QUEUE_TYPE_SDMA means PCIe optimized SDMA queues.
Introduce a new QUEUE_TYPE_SDMA_XGMI, which is optimized
for non-PCIe transfer such as XGMI.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previous codes assumes there are two sdma engines.
This is not true e.g., Raven only has 1 SDMA engine.
Fix the issue by using sdma engine number info in
device_info.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids duplicated code.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of allocat hiq and sdma mqd from sub-allocator, allocate
them from a mqd trunk pool. This is done for all asics
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is preparation work to introduce more mqd allocation
scheme
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MEC FW for some new asic requires all SDMA MQDs to be in a continuous
trunk of memory right after HIQ MQD. Add a field in device queue manager
to hold the HIQ/SDMA MQD memory object and allocate MQD trunk on device
queue manager initialization.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also initialize mqd size on mqd manager initialization
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously mqd managers was initialized on demand. As there
are only a few type of mqd managers, the on demand initialization
doesn't save too much memory. Initialize them on device
queue initialization instead and delete the get_mqd_manager
interface. This makes codes more organized for future changes.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With introduction of new mqd allocation scheme for HIQ,
DIQ and HIQ use different mqd allocation scheme, DIQ
can't reuse HIQ mqd manager
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Global function mqd_manager_init just calls asic-specific functions and it
is not necessary. Delete it and introduce a mqd_manager_init interface in
dqm for asic-specific mqd manager init. Call mqd_manager_init interface
directly to initialize mqd manager
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is circular lock between gfx and kfd path with HMM change:
lock(dqm) -> bo::reserve -> amdgpu_mn_lock
To avoid this, move init/unint_mqd() out of lock(dqm), to remove nested
locking between mmap_sem and bo::reserve. The locking order
is: bo::reserve -> amdgpu_mn_lock(p->mn)
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttmp[4:5] is initialized by the SPI with SPI_GDBG_TRAP_DATA* values.
These values are more useful to the debugger than ttmp[14:15], which
carries dispatch_scratch_base*. There are too few registers to
preserve both.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SQ_WAVE_IB_STS.RCNT grew from 4 bits to 5 in gfx9. Do not truncate
when saving in the high bits of TTMP1.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If instruction fetch fails the wave cannot be halted and returned to
the shader without raising MEM_VIOL again. Currently the wave is
terminated if this occurs, but this loses information about the cause
of the fault. The debugger would prefer the faulting wave state to be
context-saved.
Poll inside the trap handler until TRAPSTS.SAVECTX indicates context
save is ready. Exit the poll loop and complete the remainder of the
exception handler, then return to the shader. The next instruction
fetch will be from the trap handler and not the faulting PC. Context
save will then deschedule the wave and save its state.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When MEM_VIOL is asserted the context save handler rewinds the
program counter. This is incorrect for any source of the exception.
MEM_VIOL may be raised in normal operation by out-of-bounds access
to LDS or GDS and does not require special handling.
Remove PC adjustment when MEM_VIOL has been raised.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix compute profile switching on process termination.
Add a dedicated reference counter to keep track of entry/exit to/from
compute profile. This enables switching compute profiles for other
reasons than process creation or termination.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sdma_queue_id is sdma queue index inside one sdma engine.
sdma_id is sdma queue index among all sdma engines. Use
those two names properly.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debug messages during SDMA queue allocation.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maximumly support 64 sdma queues
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix some spacing issues, log output, uses of !=NULL/==NULL, unneeded
extra lines and clean up a declaration from =1 to =true for clarity
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Upper level runtime need the xgmi hops info to determine the data path
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a new memory type (KFD_IOC_ALLOC_MEM_FLAGS_MMIO_REMAP) and
expose mmio page of HDP registers to user space through this new
memory type.
v2: moved remapped hdp regs to adev struct
v3: rename the new memory type to ALLOC_MEM_FLAGS_MMIO_REMAP
v4: use more generic function name
v5: Fail remapped mmio allocation for asics before gfx9
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=4Wu/
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Nothing too unusual here for rc2. Except the amdgpu DMCU firmware
loading fix caused build breakage with a different set of Kconfig
options. I've just reverted it for now until the AMD folks can rewrite
it to avoid that problem.
i915:
- boosting fix
- bump ready task fixes
- GVT - reset fix, error return, TRTT handling fix
amdgpu:
- DMCU firmware loading fix
- Polaris 10 pci id for kfd
- picasso screen corruption fix
- SR-IOV fixes
- vega driver reload fixes
- SMU locking fix
- compute profile fix for kfd
vmwgfx:
- integer overflow fixes
- dma sg fix
sun4i:
- HDMI phy fixes
gma500:
- LVDS detection fix
panfrost:
- devfreq selection fix"
* tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
Revert "drm/amd/display: Don't load DMCU for Raven 1"
drm/panfrost: Select devfreq
drm/gma500/cdv: Check vbt config bits when detecting lvds panels
drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read
drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()
drm/vmwgfx: Use the dma scatter-gather iterator to get dma addresses
drm/vmwgfx: Fix compat mode shader operation
drm/vmwgfx: Fix user space handle equal to zero
drm/vmwgfx: Don't send drm sysfs hotplug events on initial master set
drm/i915/gvt: Fix an error code in ppgtt_populate_spt_by_guest_entry()
drm/i915/gvt: do not let TRTTE and 0x4dfc write passthrough to hardware
drm/i915/gvt: add 0x4dfc to gen9 save-restore list
drm/i915/gvt: Tiled Resources mmios are in-context mmios for gen9+
drm/i915/gvt: use cmd to restore in-context mmios to hw for gen9 platform
drm/i915/gvt: emit init breadcrumb for gvt request
drm/amdkfd: Fix compute profile switching
drm/amdgpu: skip fw pri bo alloc for SRIOV
drm/amd/powerplay: fix locking in smu_feature_set_supported()
drm/amdgpu/gmc9: set vram_width properly for SR-IOV
drm/amdgpu/soc15: skip reset on init
...
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix compute profile switching on process termination.
Add a dedicated reference counter to keep track of entry/exit to/from
compute profile. This enables switching compute profiles for other
reasons than process creation or termination.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was added to amdgpu but was missed in amdkfd
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.rg
Use new helper pci_dev_id() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Method of getting firmware version is the same across ASICs, so remove
them from ASIC-specific files and create one in amdgpu_amdkfd.c. This new
created get_fw_version simply reads fw_version from adev->gfx than parsing
the ucode header.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS ECC event will combine with GPU reset event, due to
ECC interrupts are caused by uncorrectable error that triggers
GPU reset.
v2: Fix misleading-indentation warning
v3: fix build with CONFIG_HSA_AMD disabled
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to collaborate with HSA_CAPABILITY in libhsakmt.
v2: squash in NULL pointer check
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is circular lock between gfx and kfd path with HMM change:
lock(dqm) -> bo::reserve -> amdgpu_mn_lock
To avoid this, move init/unint_mqd() out of lock(dqm), to remove nested
locking between mmap_sem and bo::reserve. The locking order
is: bo::reserve -> amdgpu_mn_lock(p->mn)
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes for 5.1:
amdgpu:
- Fix missing fw declaration after dropping old CI DPM code
- Fix debugfs access to registers beyond the MMIO bar size
- Fix context priority handling
- Add missing license on some new files
- Various cleanups and bug fixes
radeon:
- Fix missing break in CS parser for evergreen
- Various cleanups and bug fixes
sched:
- Fix entities with 0 run queues
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221214134.3308-1-alexander.deucher@amd.com
We can directly calculate sdma doorbell indexes in the process doorbell
pages through the doorbell_index structure in amdgpu_device, so no need
to cache them in kgd2kfd_shared_resources any more. This alleviates the
adaptation needs when new SDMA configurations are introduced.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reserved doorbells for SDMA IH and VCN were not properly masked out
when allocating doorbells for CP user queues. This patch fixed that.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The similar definitions should be consecutive.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
dGPUs need their own topology devices. Don't assign them to APU topology
devices with CPU cores.
Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Elias Konstantinidis <ekondis@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ifdef x86_64 specific code.
Allow enabling CONFIG_HSA_AMD on ARM64.
v2: Fixed a compiler warning due to an unused variable
CC: Mark Nutter <Mark.Nutter@arm.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Mark Nutter <Mark.Nutter@arm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dGPUs need their own topology devices. Don't assign them to APU topology
devices with CPU cores.
Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Elias Konstantinidis <ekondis@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ifdef x86_64 specific code.
Allow enabling CONFIG_HSA_AMD on ARM64.
v2: Fixed a compiler warning due to an unused variable
CC: Mark Nutter <Mark.Nutter@arm.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Mark Nutter <Mark.Nutter@arm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kgd2kfd function pointers and global kgd2kfd pointer are no longer in use.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since amdkfd is merged into amdgpu module and amdgpu can access amdkfd
directly, move declaration of kgd2kfd functions from kfd_priv.h to
amdgpu_amdkfd.h
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=hFld
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Happy New Year, just decloaking from leave to get some stuff from the
last week in before rc1:
core:
- two regression fixes for damage blob and atomic
i915 gvt:
- Some missed GVT fixes from the original pull
amdgpu:
- new PCI IDs
- SR-IOV fixes
- DC fixes
- Vega20 fixes"
* tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits)
drm: Put damage blob when destroy plane state
drm: fix null pointer dereference on null state pointer
drm/amdgpu: Add new VegaM pci id
drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output
drm/amdgpu: add Vega20 PSP ASD firmware loading
drm/amd/display: Fix MST dp_blank REG_WAIT timeout
drm/amd/display: validate extended dongle caps
drm/amd/display: Use div_u64 for flip timestamp ns to ms
drm/amdgpu/uvd:Change uvd ring name convention
drm/amd/powerplay: add Vega20 LCLK DPM level setting support
drm/amdgpu: print process info when job timeout
drm/amdgpu/nbio7.4: add hw bug workaround for vega20
drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12
drm/amd/display: Optimize passive update planes.
drm/amd/display: verify lane status before exiting verify link cap
drm/amd/display: Fix bug with not updating VSP infoframe
drm/amd/display: Add retry to read ddc_clock pin
drm/amd/display: Don't skip link training for empty dongle
drm/amd/display: Wait edp HPD to high in detect_sink
drm/amd/display: fix surface update sequence
...
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.
This patch converts zone->managed_pages. Subsequent patches will convert
totalram_panges, totalhigh_pages and eventually managed_page_count_lock
will be removed.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On errors, dma_buf_get returns a negative error code, rather than NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New vega10 ids.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This allows user mode to map doorbell pages into GPUVM address space.
That way GPUs can submit to user mode queues (self-dispatch).
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is used for interoperability between ROCm compute and graphics
APIs. It allows importing graphics driver BOs into the ROCm SVM
address space for zero-copy GPU access.
The API is split into two steps (query and import) to allow user mode
to manage the virtual address space allocation for the imported buffer.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
top_dev->gpu is NULL for CPUs. Avoid dereferencing it if NULL.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gca/gfx_8_0_enum.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a known gfx9 HW issue, and this change can perfectly workaround
the issue.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes debug message get printed even when there is early return.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Vega12 and Polaris12 device info and device IDs to KFD.
Signed-off-by: Gang Ba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will make reading code much easier. This fixes a few spots missed in a
previous commit with the same title.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The flags are added when calling amdgpu_gmc_pd_addr().
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same statement is later done in kgd_set_pasid_vmid_mapping(), so no
need to do it in set_pasid_vmid_mapping().
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_amdkfd_ prefix to amdgpu functions served for amdkfd usage.
v2: fix indentation
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After amdkfd module is merged into amdgpu, KFD can call amdgpu directly
and no longer needs to use the function pointer. Replace those function
pointers with functions if they are not ASIC dependent.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kmemdup has implemented the function that kmalloc() + memcpy().
We prefer to kmemdup rather than code opened implementation.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c: In function 'destroy_queue_cpsch':
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c:1366:7: warning:
variable 'preempt_all_queues' set but not used [-Wunused-but-set-variable]
It never used since introduct in
commit 992839ad64 ("drm/amdkfd: Add static user-mode queues support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This mm_struct pointer should never be dereferenced. If running in
a user thread, just use current->mm. If running in a kernel worker
use get_task_mm to get a safe reference to the mm_struct.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware have the workaround to replace the atomic Ops with read-modify-write on CP side.
User should not expect atomic Ops on system memory works normally if system didn't not
support it.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-By: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Vega20 device IDs, device info and enable it in KFD.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
amdgpu_gpuvm_get_process_page_dir should return the page table address
in the format expected by the pm4_map_process packet for all ASIC
generations.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Vega20 supports 8 SDMA queues per engine
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wavefront context save data is of interest to userspace clients for
debugging static wavefront state. The MQD contains two parameters
required to parse the control stack and the control stack itself
is kept in the MQD from gfx9 onwards.
Add an ioctl to fetch the context save area and control stack offsets
and to copy the control stack to a userspace address if it is kept in
the MQD.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also save the version in struct kfd_dev so we only need to query
it once.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFD module doesn't support TONGA SRIOV, if init KFD module in TONGA SRIOV
environment, it will let compute ring IB test fail.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the flags of properties according to Asic type and pcie
capabilities.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we
need to workaround this.
For future compatibility, we also overwrite the bit in capability according
to the value of needs_iommu_device.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CWSR fails on Raven if the control stack is MTYPE_UC, which is used
for regular GART mappings. As a workaround we map it using MTYPE_NC.
The MEC firmware expects the control stack at one page offset from the
start of the MQD so it is part of the MQD allocation on GFXv9. AMDGPU
added a memory allocation flag just for this purpose.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Generate xGMI iolink for upper level usage
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the iolink type defines according to the new thunk spec
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thunk will generate the XGMI topology information when necessary with the hive_id
for each specified device
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move some KFD-related (but used in amdgpu_drv.c) definitions from
kfd_priv.h to kgd_kfd_interface.h so we don't need to include kfd_priv.h
in amdgpu_drv.c. This fixes a build failure when AMDGPU is enabled but
MMU_NOTIFIER is not.
This patch also disables KFD-related module options when HSA_AMD is not
enabled.
v2: rebase (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For compute vm acquired from amdgpu, vm.pasid is managed
by kfd. Decouple pasid from such vm on process destroy
to avoid duplicate pasid release.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make a amdgpu vm to a compute vm, the old pasid will be freed and
replaced with a pasid managed by kfd. Kfd can't reuse original pasid
allocated by amdgpu because kfd uses different pasid policy with amdgpu.
For example, all graphic devices share one same pasid in a process.
v2: rebase (Alex)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After merging KFD into amdgpu, move module parameters defined in KFD to
amdgpu_drv.c, where other module parameters are declared.
v2: add kernel-doc comments
v3: rebase and fix parameter variable name (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since KFD is only supported by single GPU driver, it makes sense to merge
amdgpu and amdkfd into one module. This patch is the initial step: merge
Kconfig and Makefile.
v2: also remove kfd from drm Kconfig
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User mode queue submissions don't go through KFD. Therefore we don't
know exactly when compute is idle or not idle. We use the existence
of user mode queues on a device as an approximation.
register_process is called when the first queue of a process is
created. Conversely unregister_process is called when the last queue
is destroyed. The first process that is registered takes compute
out of idle. The last process that is unregisters sets compute back
to idle.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
CU-masking allows a KFD client to control the set of CUs used by a
user mode queue for executing compute dispatches. This can be used
for optimizing the partitioning of the GPU and minimize conflicts
between concurrent tasks.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add DID and kfd_device_info for Raven.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
memory_exception_data is already initialized for not-present faults.
It only needs to be overridden for permission faults.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven multiple PPRs can be queued up by the hardware. When the
first of those requests is handled by the IOMMU driver, the memory
access succeeds. After that the application may be done with the
memory and unmap it. At that point the page table entries are
invalidated, but there are still outstanding duplicate PPRs for those
addresses. When the IOMMU driver processes those duplicate requests,
it finds invalid page table entries and triggers an invalid PPR fault.
As a workaround, don't signal invalid PPR faults on Raven to avoid
segfaulting applications that haven't done anything wrong. As a side
effect, real GPU memory access faults may go unnoticed by the
application.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven Invalid PPRs (peripheral page requests) can be reported
because multiple PPRs can be still queued when memory is freed.
Apply a rate limit to avoid flooding the log in this case.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven there is only one SDMA engine instead of previously assumed two,
so we need to adapt our code to this new scenario.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If there are several memory banks that has the same properties in CRAT,
we aggregate them into one memory bank. This cleans up memory banks on
APUs (e.g. Raven) where the CRAT reports each memory channel as a
separate bank. This only confuses user mode, which only deals with
virtual memory.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This will make reading code much easier.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This makes all module parameters use the same form. Meanwhile clean up
the surrounding code.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This avoids triggering a GPU reset or otherwise changing the HW
state. Instead KFD will hang, which allows HW debugging tools to
analyze the problem.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The bitmap index calculation should reverse the logic used on allocation
so it will clear the same bit used on allocation
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The reset will be performed in a new hw_exception work thread to
handle HWS hang without blocking the thread that detected the hang.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Lock KFD and evict existing queues on reset. Notify user mode by
signaling hw_exception events.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Upon VM Fault, the VMID and PASID written by HW are zeros in
Hawaii. Instead of reading from ih_ring_entry, read directly
from the registers. This workaround fix the soft hang issues
caused by mishandled VM Fault in Hawaii.
Signed-off-by: Lan Xiao <Lan.Xiao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
1. Pre-GFX9 the amdgpu ISR saves the vm-fault status and address per
per-vmid. amdkfd needs to get the information from amdgpu through the
new get_vm_fault_info interface. On GFX9 and later, all the required
information is in the IH ring
2. amdkfd unmaps all queues from the faulting process and create new
run-list without the guilty process
3. amdkfd notifies the runtime of the vm fault trap via EVENT_TYPE_MEMORY
Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Moses Reuben <moses.reuben@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process.
This fixes kernel oopses when a child process calls KFD ioctls with
a file descriptor inherited from the parent process.
Signed-off-by: Wei Lu <wei.lu2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The scheduler may raise SQ_WAVE_STATUS.SPI_PRIO via SQ_CMD before
context restore has completed. Restoring SPI_PRIO=0 after this point
may cause context save to fail as the lower priority wavefronts
are not selected for execution among spin-waiting wavefronts.
Leave SPI_PRIO at its SPI-initialized or scheduler-raised value.
v2: Also fix race with exception handler
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is no longer needed with the memalloc_nofs_save/restore in
dqm_lock/unlock.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is needed to prevent deadlocks when MMU notifiers run in
reclaim-FS context and take the DQM lock for userptr evictions.
Previously this was done by making all memory allocations under
DQM locks GFP_NOIO. This is error prone. Using
memalloc_nofs_save/restore will reliably affect all memory
allocations anywhere in the kernel while the DQM lock is held.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
getrawmonotonic64() and get_monotonic_boottime64() are deprecated
because of the nonstandard naming.
The replacement functions ktime_get_raw_ns() and ktime_get_boot_ns()
also simplify the callers.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is amdkfd pull for 4.18. The major new features are:
- Add support for GFXv9 dGPUs (VEGA)
- Add support for userptr memory mapping
In addition, there are a couple of small fixes and improvements, such as:
- Fix lock handling
- Fix rollback packet in kernel kfd_queue
- Optimize kfd signal handling
- Fix CP hang in APU
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514070126.GA1827@odedg-x270
When CONFIG_MMU_NOTIFIER is not enabled, struct mmu_notifier has an
incomplete type definition, which causes build errors.
../drivers/gpu/drm/amd/amdkfd/kfd_priv.h:607:22: error: field 'mmu_notifier' has incomplete type
../include/linux/kernel.h:979:32: error: dereferencing pointer to incomplete type
../include/linux/kernel.h:980:18: error: dereferencing pointer to incomplete type
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:434:2: error: implicit declaration of function 'mmu_notifier_unregister_no_release' [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:435:2: error: implicit declaration of function 'mmu_notifier_call_srcu' [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:438:21: error: variable 'kfd_process_mmu_notifier_ops' has initializer but incomplete type
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: error: unknown field 'release' specified in initializer
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: warning: excess elements in struct initializer [enabled by default]
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: warning: (near initialization for 'kfd_process_mmu_notifier_ops') [enabled by default]
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:534:2: error: implicit declaration of function 'mmu_notifier_register' [-Werror=implicit-function-declaration]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
