Commit Graph

3917 Commits

Author SHA1 Message Date
Nicholas Piggin
972472c746 ARM: mm: add missing pud_page define to 2-level page tables
Patch series "huge vmalloc mappings", v13.

The kernel virtual mapping layer grew support for mapping memory with >
PAGE_SIZE ptes with commit 0ddab1d2ed ("lib/ioremap.c: add huge I/O
map capability interfaces"), and implemented support for using those
huge page mappings with ioremap.

According to the submission, the use-case is mapping very large
non-volatile memory devices, which could be GB or TB:

  https://lore.kernel.org/lkml/1425404664-19675-1-git-send-email-toshi.kani@hp.com/

The benefit is said to be in the overhead of maintaining the mapping,
perhaps both in memory overhead and setup / teardown time.  Memory
overhead for the mapping with a 4kB page and 8 byte page table is 2GB
per TB of mapping, down to 4MB / TB with 2MB pages.

The same huge page vmap infrastructure can be quite easily adapted and
used for mapping vmalloc memory pages without more complexity for arch
or core vmap code.  However unlike ioremap, vmalloc page table overhead
is not a real problem, so the advantage to justify this is performance.

Several of the most structures in the kernel (e.g., vfs and network hash
tables) are allocated with vmalloc on NUMA machines, in order to
distribute access bandwidth over the machine.  Mapping these with larger
pages can improve TLB usage significantly, for example this reduces TLB
misses by nearly 30x on a `git diff` workload on a 2-node POWER9 (59,800
-> 2,100) and reduces CPU cycles by 0.54%, due to vfs hashes being
allocated with 2MB pages.

[ Other numbers?
  - The difference is even larger in a guest due to more costly TLB
    misses.
  - Eric Dumazet was keen on the network hash performance possibilities.
  - Other archs? Ding was doing x86 testing. ]

The kernel module allocator also uses vmalloc to map module images even on
non-NUMA, which can result in high iTLB pressure on highly modular distro
type of kernels.  This series does not implement huge mappings for modules
yet, but it's a step along the way.  Rick Edgecombe was looking at that
IIRC.

The per-cpu allocator similarly might be able to take advantage of this.
Also on the todo list.

The disadvantages of this I can see are:
* Memory fragmentation can waste some physical memory because it will
  attempt to allocate larger pages to fit the required size, rounding up
  (once the requested size is >= 2MB).
  - I don't see it being a big problem in practice unless some user
    crops up that allocates thousands of 2.5MB ranges. We can tewak
    heuristics a bit there if needed to reduce peak waste.
* Less granular mappings can make the NUMA distribution less balanced.
  - Similar to the above.
  - Could also allocate all major system hashes with one allocation
    up-front and spread them all across the one block, which should help
    overall NUMA distribution and reduce fragmentation waste.
* Callers might expect something about the underlying allocated pages.
  - Tried to keep the apperance of base PAGE_SIZE pages throughout the
    APIs and exposed data structures.
  - Added a VM_NO_HUGE_VMAP flag to hammer troublesome cases with.

- Finally, added a nohugevmalloc boot option to turn it off (independent
  of nohugeiomap).

This patch (of 14):

ARM uses its own PMD folding scheme which is missing pud_page which should
just pass through to pmd_page.  Move this from the 3-level page table to
common header.

Link: https://lkml.kernel.org/r/20210317062402.533919-2-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 11:20:39 -07:00
Linus Torvalds
0ff0edb550 Locking changes for this cycle were:
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of code
  - Futex simplifications & cleanups
  - Add debugging to the CSD code, to help track down a tenacious race (or hw problem)
  - Add lockdep_assert_not_held(), to allow code to require a lock to not be held,
    and propagate this into the ath10k driver
  - Misc LKMM documentation updates
  - Misc KCSAN updates: cleanups & documentation updates
  - Misc fixes and cleanups
  - Fix locktorture bugs with ww_mutexes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJDn0RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hPrRAAryS4zPnuDsfkVk0smxo7a0lK5ljbH2Xo
 28QUZXOl6upnEV8dzbjwG7eAjt5ZJVI5tKIeG0PV0NUJH2nsyHwESdtULGGYuPf/
 4YUzNwZJa+nI/jeBnVsXCimLVxxnNCRdR7yOVOHm4ukEwa+YTNt1pvlYRmUd4YyH
 Q5cCrpb3THvLka3AAamEbqnHnAdGxHKuuHYVRkODpMQ+zrQvtN8antYsuk8kJsqM
 m+GZg/dVCuLEPah5k+lOACtcq/w7HCmTlxS8t4XLvD52jywFZLcCPvi1rk0+JR+k
 Vd9TngC09GJ4jXuDpr42YKkU9/X6qy2Es39iA/ozCvc1Alrhspx/59XmaVSuWQGo
 XYuEPx38Yuo/6w16haSgp0k4WSay15A4uhCTQ75VF4vli8Bqgg9PaxLyQH1uG8e2
 xk8U90R7bDzLlhKYIx1Vu5Z0t7A1JtB5CJtgpcfg/zQLlzygo75fHzdAiU5fDBDm
 3QQXSU2Oqzt7c5ZypioHWazARk7tL6th38KGN1gZDTm5zwifpaCtHi7sml6hhZ/4
 ATH6zEPzIbXJL2UqumSli6H4ye5ORNjOu32r7YPqLI4IDbzpssfoSwfKYlQG4Tvn
 4H1Ukirzni0gz5+wbleItzf2aeo1rocs4YQTnaT02j8NmUHUz4AzOHGOQFr5Tvh0
 wk/P4MIoSb0=
 =cOOk
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:

 - rtmutex cleanup & spring cleaning pass that removes ~400 lines of
   code

 - Futex simplifications & cleanups

 - Add debugging to the CSD code, to help track down a tenacious race
   (or hw problem)

 - Add lockdep_assert_not_held(), to allow code to require a lock to not
   be held, and propagate this into the ath10k driver

 - Misc LKMM documentation updates

 - Misc KCSAN updates: cleanups & documentation updates

 - Misc fixes and cleanups

 - Fix locktorture bugs with ww_mutexes

* tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  kcsan: Fix printk format string
  static_call: Relax static_call_update() function argument type
  static_call: Fix unused variable warn w/o MODULE
  locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock()
  locking/rtmutex: Restrict the trylock WARN_ON() to debug
  locking/rtmutex: Fix misleading comment in rt_mutex_postunlock()
  locking/rtmutex: Consolidate the fast/slowpath invocation
  locking/rtmutex: Make text section and inlining consistent
  locking/rtmutex: Move debug functions as inlines into common header
  locking/rtmutex: Decrapify __rt_mutex_init()
  locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs
  locking/rtmutex: Inline chainwalk depth check
  locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c
  locking/rtmutex: Remove empty and unused debug stubs
  locking/rtmutex: Consolidate rt_mutex_init()
  locking/rtmutex: Remove output from deadlock detector
  locking/rtmutex: Remove rtmutex deadlock tester leftovers
  locking/rtmutex: Remove rt_mutex_timed_lock()
  MAINTAINERS: Add myself as futex reviewer
  locking/mutex: Remove repeated declaration
  ...
2021-04-28 12:37:53 -07:00
Linus Torvalds
8e47c5f0e2 xen: branch for v5.13-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYIZZdwAKCRCAXGG7T9hj
 vtaDAQDplyo+1T1Mv5DepYe0DnGYicOsCxzYzqMvhYkb+eubyAD/SFcsof/PtJAW
 2zropoo2NTnf+zQVuC638pdXVSK9VAc=
 =n1Tz
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

 - remove some PV ACPI cpu/memory hotplug code which has been broken for
   a long time

 - support direct mapped guests (other than dom0) on Arm

 - several small fixes and cleanups

* tag 'for-linus-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mapped
  xen-pciback: simplify vpci's find hook
  xen-blkfront: Fix 'physical' typos
  xen-blkback: fix compatibility bug with single page rings
  xen: Remove support for PV ACPI cpu/memory hotplug
  xen/pciback: Fix incorrect type warnings
2021-04-26 10:37:45 -07:00
Stefano Stabellini
f5079a9a2a xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mapped
Newer Xen versions expose two Xen feature flags to tell us if the domain
is directly mapped or not. Only when a domain is directly mapped it
makes sense to enable swiotlb-xen on ARM.

Introduce a function on ARM to check the new Xen feature flags and also
to deal with the legacy case. Call the function xen_swiotlb_detect.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210319200140.12512-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23 11:33:50 +02:00
Jisheng Zhang (syna)
aefdd4383b ARM: 9072/1: mm: remove set_kernel_text_r[ow]()
After commit 5a735583b7 ("arm/ftrace: Use __patch_text()"), the last
and only user of these functions has gone, remove them.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-04-18 19:15:11 +01:00
Will Deacon
6e085e0ac9 arm/arm64: Probe for the presence of KVM hypervisor
Although the SMCCC specification provides some limited functionality for
describing the presence of hypervisor and firmware services, this is
generally applicable only to functions designated as "Arm Architecture
Service Functions" and no portable discovery mechanism is provided for
standard hypervisor services, despite having a designated range of
function identifiers reserved by the specification.

In an attempt to avoid the need for additional firmware changes every
time a new function is added, introduce a UID to identify the service
provider as being compatible with KVM. Once this has been established,
additional services can be discovered via a feature bitmap.

Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
[maz: move code to its own file, plug it into PSCI]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-2-jianyong.wu@arm.com
2021-03-31 09:16:55 +01:00
Masahiro Yamada
32e9a0d5ff ARM: 9067/1: syscalls: switch to generic syscallhdr.sh
Many architectures duplicate similar shell scripts.

This commit converts ARM to use scripts/syscallhdr.sh, and also
collects OABI/OEBI syscalls into unistd-eabi.h/unistd-oabi.h,
removing unistd-common.h.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-25 14:13:14 +00:00
Ingo Molnar
e2db7592be locking: Fix typos in comments
Fix ~16 single-word typos in locking code comments.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-03-22 02:45:52 +01:00
Juergen Gross
a0e2bf7cb7 x86/paravirt: Switch time pvops functions to use static_call()
The time pvops functions are the only ones left which might be
used in 32-bit mode and which return a 64-bit value.

Switch them to use the static_call() mechanism instead of pvops, as
this allows quite some simplification of the pvops implementation.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311142319.4723-5-jgross@suse.com
2021-03-11 16:17:52 +01:00
Joel Stanley
08cbcb9702 ARM: 9060/1: kexec: Remove unused kexec_reinit callback
The last (only?) user of this was removed in commit ba364fc752 ("ARM:
Kirkwood: Remove mach-kirkwood"), back in v3.17.

Link: https://lore.kernel.org/r/20210210235243.398810-1-joel@jms.id.au

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-09 10:25:35 +00:00
Ard Biesheuvel
95731b8ee6 ARM: 9059/1: cache-v7: get rid of mini-stack
Now that we have reduced the number of registers that we need to
preserve when calling v7_invalidate_l1 from the boot code, we can use
scratch registers to preserve the remaining ones, and get rid of the
mini stack entirely. This works around any issues regarding cache
behavior in relation to the uncached accesses to this memory, which is
hard to get right in the general case (i.e., both bare metal and under
virtualization)

While at it, switch v7_invalidate_l1 to using ip as a scratch register
instead of r4. This makes the function AAPCS compliant, and removes the
need to stash r4 in ip across the call.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-09 10:25:18 +00:00
Linus Torvalds
6ff6f86bc4 ARM updates for 5.12-rc1:
- Generalise byte swapping assembly
 - Update debug addresses for STI
 - Validate start of physical memory with DTB
 - Do not clear SCTLR.nTLSMD in decompressor
 - amba/locomo/sa1111 devices remove method return type is void
 - address markers for KASAN in page table dump
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmAzrfYACgkQ9OeQG+St
 rGTmRQ/+MG9BO1WahlXZ9eVx6n6KmtwlzAy5m4B24GomvcXsa+T2s0Vs43hAsOQ2
 f/b6n1mPlwRjAvKW8IfO243HKDE6STGbtVPae6ts586QCODs8i3MQsq4SWmM/DMk
 TR87hTo1zd4baVT9tkM8/UdUwQjr0yRf4ZDhcCj09tMClnV/8ZAEE9/lLkBpDoer
 wcuPaDtRfJhN+Pqnm8ES8KPj15nVm/GFWBFoDWZIOCjyDnl8Y/1Bnz3NeqzfwM1o
 O0NS/9a1tMBn7TNGkkcJCimqOLZS2OgxLND8fie0rC5fmwzVomKXE24OdXpSQCps
 LiGJr+iQOaX6qNqJY2h1If8F+RPwKfh4Mrk12x0MWB6Ap2iKsQ6bmtUCNatmJ4PG
 5iKV5zY0SwKRYXAkXcNosEPUJqZirFHJCzrQ8IBmiSJ1cahZykWFgorDnA97kNLR
 Wlp2Y/037ug7EGZ0YSaXvbpuMyyjDP4TBKqBiSl7a90QYoXQg2QgcrBO3kVlh/5H
 Dxq9URvIpDLIGo1EUBU90kB54TUeDhJVHJWDfXNwOp4dP1Xm6b2w+d86GnUQanlC
 sinRut1ULMyitmIzg9F74MZKaSJ65ffEP3nZKIAlSSISQL+/bXtMDVtakVGsv1k1
 w4IdACf3GqbjHig4mOX0oW7IwtyfBY+0q3udY28ASW0ujsH9qHE=
 =BULT
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - Generalise byte swapping assembly

 - Update debug addresses for STI

 - Validate start of physical memory with DTB

 - Do not clear SCTLR.nTLSMD in decompressor

 - amba/locomo/sa1111 devices remove method return type is void

 - address markers for KASAN in page table dump

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
  ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
  amba: Make use of bus_type functions
  amba: Make the remove callback return void
  vfio: platform: simplify device removal
  amba: reorder functions
  amba: Fix resource leak for drivers without .remove
  ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
  ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
  ARM: 9051/1: vdso: remove unneded extra-y addition
  ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
  ARM: 9049/1: locomo: make locomo bus's remove callback return void
  ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
  ARM: 9047/1: smp: remove unused variable
  ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
  ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
  ARM: 9042/1: debug: no uncompress debugging while semihosting
  ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
  ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
  ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-22 14:27:07 -08:00
Linus Torvalds
99ca0edb41 arm64 updates for 5.12
- vDSO build improvements including support for building with BSD.
 
  - Cleanup to the AMU support code and initialisation rework to support
    cpufreq drivers built as modules.
 
  - Removal of synthetic frame record from exception stack when entering
    the kernel from EL0.
 
  - Add support for the TRNG firmware call introduced by Arm spec
    DEN0098.
 
  - Cleanup and refactoring across the board.
 
  - Avoid calling arch_get_random_seed_long() from
    add_interrupt_randomness()
 
  - Perf and PMU updates including support for Cortex-A78 and the v8.3
    SPE extensions.
 
  - Significant steps along the road to leaving the MMU enabled during
    kexec relocation.
 
  - Faultaround changes to initialise prefaulted PTEs as 'old' when
    hardware access-flag updates are supported, which drastically
    improves vmscan performance.
 
  - CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
    (#1024718)
 
  - Preparatory work for yielding the vector unit at a finer granularity
    in the crypto code, which in turn will one day allow us to defer
    softirq processing when it is in use.
 
  - Support for overriding CPU ID register fields on the command-line.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmAmwZcQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNLA1B/0XMwWUhmJ4ZPK4sr28YWHNGLuCFHDgkMKU
 dEmS806OF9d0J7fTczGsKdS4IKtXWko67Z0UGiPIStwfm0itSW2Zgbo9KZeDPqPI
 fH0s23nQKxUMyNW7b9p4cTV3YuGVMZSBoMug2jU2DEDpSqeGBk09NPi6inERBCz/
 qZxcqXTKxXbtOY56eJmq09UlFZiwfONubzuCrrUH7LU8ZBSInM/6Q4us/oVm4zYI
 Pnv996mtL4UxRqq/KoU9+cQ1zsI01kt9/coHwfCYvSpZEVAnTWtfECsJ690tr3mF
 TSKQLvOzxbDtU+HcbkNVKW0A38EIO1xXr8yXW9SJx6BJBkyb24xo
 =IwMb
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:

 - vDSO build improvements including support for building with BSD.

 - Cleanup to the AMU support code and initialisation rework to support
   cpufreq drivers built as modules.

 - Removal of synthetic frame record from exception stack when entering
   the kernel from EL0.

 - Add support for the TRNG firmware call introduced by Arm spec
   DEN0098.

 - Cleanup and refactoring across the board.

 - Avoid calling arch_get_random_seed_long() from
   add_interrupt_randomness()

 - Perf and PMU updates including support for Cortex-A78 and the v8.3
   SPE extensions.

 - Significant steps along the road to leaving the MMU enabled during
   kexec relocation.

 - Faultaround changes to initialise prefaulted PTEs as 'old' when
   hardware access-flag updates are supported, which drastically
   improves vmscan performance.

 - CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
   (#1024718)

 - Preparatory work for yielding the vector unit at a finer granularity
   in the crypto code, which in turn will one day allow us to defer
   softirq processing when it is in use.

 - Support for overriding CPU ID register fields on the command-line.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
  drivers/perf: Replace spin_lock_irqsave to spin_lock
  mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
  arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
  arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
  arm64: Defer enabling pointer authentication on boot core
  arm64: cpufeatures: Allow disabling of BTI from the command-line
  arm64: Move "nokaslr" over to the early cpufeature infrastructure
  KVM: arm64: Document HVC_VHE_RESTART stub hypercall
  arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
  arm64: Add an aliasing facility for the idreg override
  arm64: Honor VHE being disabled from the command-line
  arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
  arm64: cpufeature: Add an early command-line cpufeature override facility
  arm64: Extract early FDT mapping from kaslr_early_init()
  arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
  arm64: cpufeature: Add global feature override facility
  arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
  arm64: Simplify init_el2_state to be non-VHE only
  arm64: Move VHE-specific SPE setup to mutate_to_vhe()
  arm64: Drop early setting of MDSCR_EL2.TPMS
  ...
2021-02-21 13:08:42 -08:00
Linus Torvalds
5011bb9fbb ARM: SoC changes for v5.12
This is mostly 32-bit code for SoC platforms, and looks smaller
 than any such branch I remember from previous kernels, as most
 of this is now handled in other subsystems for modern platforms:
 
 - Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
   Renesas, and Samsung
 
 - Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung
 
 - Samsung SoC driver updates to make them loadable modules
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmApkHsACgkQYKtH/8kJ
 UidKTRAA4nFode+U/cvcfDoA4HoUseDTzEHL7WmEjnQk48lEbNI3B2rONFkzXtFC
 Wa8dvZw8EQ/bx/Sfe2WHUCVPEK6iVzb8AaaYPx06Xg6yFQjSEc4qdeeBtWFaRZoC
 tmGQWMNjB3IzxhrKGwCwhbuUuVdIWN7DlKcyx+5sMjg9oPO7Ptb557VtR5f1vjQC
 UR1KB1IBag2hNuE2BRPpmbOn/Jhq0ADQRrIm0sjvWN9CmArL7Og9WiuU0pwkmbqn
 AGnzsylJ8+kR70F4O+s20SOC+NkAK1uA80+QeNDX9IeCyI2mz5ubg1tkXLb9nIQQ
 qLYoMI7tUWTnROhcO10nSLz4wqcWWLKgf+6Wsod6lhUS8DNSYC5/bDf13UYHzGu0
 fQZZxp7hEabKcD/Ub8IpY4hUfeUfpWts/h0iUVkpQfCYAreRxUG8C7ZHjIWycdg9
 cOl6GyPLe397ONfX4XER0htICjUSrSCB09EpmoFfdBDBlbw/E1eZoKjTI0emEu2J
 bvA1x7orDdlCJcQn5dPpP1L2HTh1gLC8/LFFuAHtMozuxGqp7f5pHXn+6OhiHLcA
 l5+T/+53iVGxvfC4g3/Pk+SQAEjF0RpL/cA8EZ5kA0MmxuwQPt35yo2RobCTEfRi
 7yC0dD4HavvDK1gfAJ7Af7v4lBtX3MidvY5el+dNjuGKvBJTqGg=
 =2ehx
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "This is mostly 32-bit code for SoC platforms, and looks smaller than
  any such branch I remember from previous kernels, as most of this is
  now handled in other subsystems for modern platforms:

   - Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
     Renesas, and Samsung

   - Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung

   - Samsung SoC driver updates to make them loadable modules"

* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: arm: samsung: include S3C headers in platform entry
  MAINTAINERS: Add linux-actions ML for Actions Semi Arch
  ARM: s3c: irq-s3c24xx: staticize local functions
  ARM: s3c: irq-s3c24xx: include headers for missing declarations
  ARM: s3c: fix fiq for clang IAS
  ARM: imx: Remove unused IMX_GPIO_NR() macro
  soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
  ARM: OMAP2+: fix spellint typo
  MAINTAINERS: Update address for OMAP GPMC driver
  soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
  ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
  ARM: brcmstb: Add debug UART entry for 72116
  ARM: tegra: Don't enable unused PLLs on resume from suspend
  soc: samsung: pm_domains: Convert to regular platform driver
  soc: samsung: exynos-chipid: correct helpers __init annotation
  ARM: mach-imx: imx6ul: Print SOC revision on boot
  ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
  soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
  soc: samsung: exynos-asv: handle reading revision register error
  soc: samsung: exynos-asv: don't defer early on not-supported SoCs
2021-02-20 18:20:06 -08:00
Linus Torvalds
584ce3c9b4 SoC platform removal
There are a lot of platforms that have not seen any interesting code
 changes in the past five years or more.
 
 I made a list and asked around which ones are no longer in use [1], and
 received confirmation about six ARM platforms and the TI C6x architecture
 that have all reached the end of their life upstream, with no known
 users remaining:
 
  - efm32 -- added in 2011, first Cortex-M, no notable changes after 2013
  - picoxcell -- added in 2011, abandoned after 2012 acquisition
  - prima2 -- added in 20111, no notable changes since 2015
  - tango -- added in 2015, sporadic changes until 2017, but abandoned
  - u300 -- added in 2009, no notable changes since 2013
  - zx --added in 2015 for both 32, 2017 for 64 bit, no notable changes
  - arch/c6x -- added in 2011, but work stalled soon after that
 
 A number of other platforms on the original list turned out to still
 have users. In some cases there are out-of-tree patches and users
 that plan to contribute them in the future, in other cases the code
 is complete and works reliably.
 
 [1] https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmApiR8ACgkQYKtH/8kJ
 Uifl7A//RZVyxUSlbD/StS6oEOmkZH8j0L7yeYOKkSHGZI+6Dqxo6rooKymbeflk
 jJvDVQqLcrclT/7rWsKesdN8aW+ilfWrby5nDsWivsROrTw3DdvZgkjh7KYz7tA/
 OxygKQu4W9I+ywJltR4ykTUxXohjU+duHPuZJawQk64xE3Q0MWxJlQQ2kHJYVJRu
 /rWgNDQaI2d8HFhhEVsn4PC0RLWfUuBevKEuRYqZwM/oB/HuYjY+uTUGe2RhlgWb
 sbcoD93JP2MghSypq33/UtEl4Uk7Wpdv2bshTTv8DL5ToltY7wD8qIIh+aSJk9hP
 0FG3NTia7e9dqQQR2bskspGxP73iIuSN1exAbm/Ten5sysy6IsESmzqZRxXv+7Z1
 q1Oyc4wYaotJPAxMOE00RMLiRa5domI8V6Y10I5uyOcmpRvwWK2WfCOE7D3WSQ5M
 i1JiqLnC5JtJ0vyVBeRKo99zZImeXXrmS0n+fcARGtcKwAqKSvKxFcLTmkj3KqHv
 L4Xgy5f83QrMZWmldX7IiwWjTar2geBM7pFgG/z3R6JqkaxWiDHxyok6j1WUCE7b
 MViRZ8wT7JC5sIkHuwXZ4jvAXPqHq6J1rmJreU6N/jzmv/PTQoUnQ3C/MbDNhuv8
 NDVSRgrPcd/T0BrBkzIWk3t+Oh6ikDgflWsWkqIRFG0vCNx+KdM=
 =pf3b
 -----END PGP SIGNATURE-----

Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform removals from Arnd Bergmann:
 "There are a lot of platforms that have not seen any interesting code
  changes in the past five years or more.

  I made a list and asked around which ones are no longer in use, and
  received confirmation about six ARM platforms and the TI C6x
  architecture that have all reached the end of their life upstream,
  with no known users remaining:

   - efm32 - added in 2011, first Cortex-M, no notable changes after 2013

   - picoxcell - added in 2011, abandoned after 2012 acquisition

   - prima2 - added in 20111, no notable changes since 2015

   - tango - added in 2015, sporadic changes until 2017, but abandoned

   - u300 - added in 2009, no notable changes since 2013

   - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes

   - arch/c6x - added in 2011, but work stalled soon after that

  A number of other platforms on the original list turned out to still
  have users. In some cases there are out-of-tree patches and users that
  plan to contribute them in the future, in other cases the code is
  complete and works reliably"

Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/

* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: remove u300 platform
  ARM: remove tango platform
  ARM: remove zte zx platform
  ARM: remove sirf prima2/atlas platforms
  c6x: remove architecture
  MAINTAINERS: Remove deleted platform efm32
  ARM: drop efm32 platform
  ARM: Remove PicoXcell platform support
  ARM: dts: Remove PicoXcell platforms
2021-02-20 18:16:30 -08:00
Linus Torvalds
4a7859ea09 ARM fixes for 5.11:
- Fix latent bug with DC21285 (Footbridge PCI bridge) configuration
   accessors that affects GCC >= 4.9.2
 - Fix misplaced tegra_uart_config in decompressor
 - Ensure signal page contents are initialised
 - Fix kexec oops
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmAdHmUACgkQ9OeQG+St
 rGTctQ/8Dlwc3G40ziB7WgaSTKsx809e5rLmoT5EvzyCuuHy6wDIbtmmY+hb7HUU
 h1bys4epWYwbiYHsDDfGWKJy+qHA1sBfZunJdRVE0O/v1x5vMkLruyC8oh0NtplS
 LRj2HReK6oIuNFA/ywa30xcWvw/BnpM+saoptXQhdsuy26QNirUqQYsq/E2mMkBG
 Sq9KMtncxw3R1o4ahgJcDAQ7PtvKZIzkEym7gtF/PhaTuiDhmDCOMzVQwikGmgnw
 ci8Mtzvses6segdCrYGr+4f7G+D7LhEprXLCbpwT5tCoEXXTQ1SIQPIvTjX0qMip
 UpZ7gP+x7eQZTWv+OnKfgRf4pOC3sqKDth3glrYVJWBzoC7faW1KrY5ugpf4OmQ8
 /IKd33PUMmm+a0eHBX/Z/ZZplzIJn81O1gBswG3zfjSCw1xa53QlfZlWEhgttZmN
 aqTnaP5dcp0mlyOkvju4AcdQ9xBxdBlCQimSRDkCy3FPjgpwlw4zNVPhnYaoK7En
 sguTGXI8MXAB6MpxGom5oPQw+GtUngyZIrQlk6PbXpmfBUmqAOhRVg6TbyvbgMIy
 5i+CVyp3tIzFpY19pSnpNhbzTgnmybBRY0BqFBg8KH0s1r2SyxhhmqSm00bIw4Cf
 rNuLQtEy4YEVOdcmKlwX9sxUBUo/M27ZXkx7u96+QLapKAFyTb8=
 =V/Oi
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Fix latent bug with DC21285 (Footbridge PCI bridge) configuration
   accessors that affects GCC >= 4.9.2

 - Fix misplaced tegra_uart_config in decompressor

 - Ensure signal page contents are initialised

 - Fix kexec oops

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: kexec: fix oops after TLB are invalidated
  ARM: ensure the signal page contains defined contents
  ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor
  ARM: footbridge: fix dc21285 PCI configuration accessors
2021-02-06 15:07:51 -08:00
Russell King
4d62e81b60 ARM: kexec: fix oops after TLB are invalidated
Giancarlo Ferrari reports the following oops while trying to use kexec:

 Unable to handle kernel paging request at virtual address 80112f38
 pgd = fd7ef03e
 [80112f38] *pgd=0001141e(bad)
 Internal error: Oops: 80d [#1] PREEMPT SMP ARM
 ...

This is caused by machine_kexec() trying to set the kernel text to be
read/write, so it can poke values into the relocation code before
copying it - and an interrupt occuring which changes the page tables.
The subsequent writes then hit read-only sections that trigger a
data abort resulting in the above oops.

Fix this by copying the relocation code, and then writing the variables
into the destination, thereby avoiding the need to make the kernel text
read/write.

Reported-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com>
Tested-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-05 10:23:29 +00:00
Arnd Bergmann
f79bf56fb2 This pull request contains Broadcom ARM-based SoCs Kconfig/machine entry
changes for 5.12, please pull the following:
 
 - Maxime adds a select of the Broadcom STB standard L2 interrupt
   controller driver which is used in the Raspberry Pi 4 HDMI controller to
   support I2C and CEC interrupts
 
 - Florian adds a debug URT entry for the 72116 STB SoC
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmAXKL4ACgkQh9CWnEQH
 BwRcahAAhPImzrTkjsZhr1Qa9L26pwBPh2Q55C9vBUuYiAPei7OTdgf1tCPm3cja
 J70OlYZiFlOWUnTyha4G00gyVRLkAxDNau8iCoJ+2cHpUMHXgYz0Rg5dLXEpAFvH
 yvxYS+cj78f+thmogH60cu6AMqowU+868mK0ivlwKMt+z4Mce3fIPhJaxWGDNoBy
 GHHvwv3WBCw8ltlezEJDUrLQ3A1IMMIGk1qRKVpsd6kkH/h/lERuVowgvjztN0Qh
 QVi3pn3Xu3p9Y4OMQIbDkBiVklrkpcUODLA5ZBieDbmV6DmWMisKaFbYg0BBn/Kt
 pvKylCHITNDSh1lNcAnxnoiCm0kKf0CE6Y+m8jaVwoC6MNm6Vc0xrX4Uquz2TWjp
 5Z9lY0xO3YF2RhtlINkzO/VxndgJIp1f/2gpn3CNvF5pTbHx5ClQsCYk7YfohHYe
 DV237IeMLSgmLWW9ijujRqsgGB2GV2KMsJH3NVnqYwIYpbURgbZ+oZBfuKkeHyCi
 y22Kc3RT8EdRFHVbKiIO8npXRl4L6WBcJlwowmasbW150O6X8ckPgRdvXC9O9KVs
 x2v+0pjZz30kv0JeGy7HaUwJY8y84G7IHCRuXKy+BHZWMX6pFPbQq/sOo8xV45zt
 Vg/XcZDSBjLQZFBaookKurDlsB5on3sY6rzQrYbzzjkFYmLX1Iw=
 =aVSR
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.12/soc' of https://github.com/Broadcom/stblinux into arm/soc

This pull request contains Broadcom ARM-based SoCs Kconfig/machine entry
changes for 5.12, please pull the following:

- Maxime adds a select of the Broadcom STB standard L2 interrupt
  controller driver which is used in the Raspberry Pi 4 HDMI controller to
  support I2C and CEC interrupts

- Florian adds a debug URT entry for the 72116 STB SoC

* tag 'arm-soc/for-5.12/soc' of https://github.com/Broadcom/stblinux:
  ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
  ARM: brcmstb: Add debug UART entry for 72116

Link: https://lore.kernel.org/r/20210131221721.685974-6-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02 22:30:35 +01:00
Uwe Kleine-König
33d6d2bb7e ARM: 9049/1: locomo: make locomo bus's remove callback return void
The driver core ignores the return value of struct bus_type::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct locomo_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.

Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-01 19:44:30 +00:00
Uwe Kleine-König
074a6bda18 ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct sa1111_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.

Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-01 19:42:13 +00:00
Alain VOLMAT
9ca4efec0a ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
Update the sti platform LL_UART support to rely on
CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT from Kconfig

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-01 19:41:31 +00:00
Ard Biesheuvel
6468e898c6 ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
Take the 4 instruction byte swapping sequence from the decompressor's
head.S, and turn it into a rev_l GAS macro for general use. While
at it, make it use the 'rev' instruction when compiling for v6 or
later.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-01 19:41:30 +00:00
Dmitry Osipenko
538eea5362 ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor
The tegra_uart_config of the DEBUG_LL code is now placed right at the
start of the .text section after commit which enabled debug output in the
decompressor. Tegra devices are not booting anymore if DEBUG_LL is enabled
since tegra_uart_config data is executes as a code. Fix the misplaced
tegra_uart_config storage by embedding it into the code.

Cc: stable@vger.kernel.org
Fixes: 2596a72d33 ("ARM: 9009/1: uncompress: Enable debug in head.S")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-01-29 11:34:40 +00:00
Florian Fainelli
d5d5b7f3e2 ARM: brcmstb: Add debug UART entry for 72116
72116 has the same memory map as 7255 and the same physical address for
the UART, alias the definition accordingly.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-21 12:09:11 -08:00
Andre Przywara
a37e31fc97 firmware: smccc: Introduce SMCCC TRNG framework
The ARM DEN0098 document describe an SMCCC based firmware service to
deliver hardware generated random numbers. Its existence is advertised
according to the SMCCC v1.1 specification.

Add a (dummy) call to probe functions implemented in each architecture
(ARM and arm64), to determine the existence of this interface.
For now this return false, but this will be overwritten by each
architecture's support patch.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2021-01-21 17:42:46 +00:00
Arnd Bergmann
f3a732843a ARM: remove sirf prima2/atlas platforms
The SiRF Prima2 and Atlas platform code was contributed by Cambridge
Silicon Radio (CSR) after aquiring the original SiRF company, and
maintained by Barry Song. CSR was subsequently acquired by Qualcomm,
who no longer have an interest in maintaining the SoC platform but
instead have released more recent SoCs for the same market in the
Snapdragon family.

As Barry is no longer working for the company, nobody else there
wants to maintain it, and there are no third-party users, the
best way forward seems to be to completely remove it.

Thanks to Barry for maintaining the platform for the past ten years.

Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/lkml/c969392572604b98bcb3be44048c3165@hisilicon.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-20 09:41:37 +01:00
Uwe Kleine-König
cc6111375c ARM: drop efm32 platform
I didn't touch this code since it served as a platform to introduce
ARMv7-M support to Linux. The only known machine that runs Linux has only
4 MiB of RAM (that originally only exists to hold the display's framebuffer).

There are no known users and no further use foreseeable, so drop the
code.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210115155130.185010-2-u.kleine-koenig@pengutronix.de'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-15 17:42:10 +01:00
Randy Dunlap
87dbc209ea local64.h: make <asm/local64.h> mandatory
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.

This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.

Build-tested on 21 of 25 arch-es.  (tools problems on the others)

Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.

Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Linus Torvalds
4a1106afee EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
  - Refactor helper for discovering the EFI secure boot mode
  - Wire up EFI secure boot to IMA for arm64
  - Some fixes for the capsule loader
  - Expose the RT_PROP table via the EFI test module
  - Relax DT and kernel placement restrictions on ARM
 
 + followup fixes:
 
  - fix the build breakage on IA64 caused by recent capsule loader changes
  - suppress a type mismatch build warning in the expansion of
        EFI_PHYS_ALIGN on ARM
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl/kWCMACgkQEsHwGGHe
 VUqVlxAAg3jSS5w5fuaXON2xYZmgKdlRB0fjbklo1ZrWS6sEHrP+gmVmrJSWGZP+
 qFleQ6AxaYK57UiBXxS6Xfn7hHRToqdOAGnaSYzIg1aQIofRoLxvm3YHBMKllb+g
 x73IBS/Hu9/kiH8EVDrJSkBpVdbPwDnw+FeW4ZWUMF9GVmV8oA6Zx23BVSVsbFda
 jat/cEsJQS3GfECJ/Fg5ae+c/2zn5NgbaVtLxVnMnJfAwEpoPz3ogKoANSskdZg3
 z6pA1aMFoHr+lnlzcsM5zdboQlwZRKPHvFpsXPexESBy5dPkYhxFnHqgK4hSZglC
 c3QoO9Gn+KOJl4KAKJWNzCrd3G9kKY5RXkoei4bH9wGMjW2c68WrbFyXgNsO3vYR
 v5CKpq3+jlwGo03GiLJgWQFdgqX0EgTVHHPTcwFpt8qAMi9/JIPSIeTE41p2+AjZ
 cW5F0IlikaR+N8vxc2TDvQTuSsroMiLcocvRWR61oV/48pFlEjqiUjV31myDsASg
 gGkOxZOOz2iBJfK8lCrKp5p9JwGp0M0/GSHTxlYQFy+p4SrcOiPX4wYYdLsWxioK
 AbVhvOClgB3kN7y7TpLvdjND00ciy4nKEC0QZ5p5G59jSLnpSBM/g6av24LsSQwo
 S1HJKhQPbzcI1lhaPjo91HQoOOMZHWLes0SqK4FGNIH+0imHliA=
 =n7Gc
 -----END PGP SIGNATURE-----

Merge tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI updates from Borislav Petkov:
 "These got delayed due to a last minute ia64 build issue which got
  fixed in the meantime.

  EFI updates collected by Ard Biesheuvel:

   - Don't move BSS section around pointlessly in the x86 decompressor

   - Refactor helper for discovering the EFI secure boot mode

   - Wire up EFI secure boot to IMA for arm64

   - Some fixes for the capsule loader

   - Expose the RT_PROP table via the EFI test module

   - Relax DT and kernel placement restrictions on ARM

  with a few followup fixes:

   - fix the build breakage on IA64 caused by recent capsule loader
     changes

   - suppress a type mismatch build warning in the expansion of
     EFI_PHYS_ALIGN on ARM"

* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
  efi: ia64: disable the capsule loader
  efi: stub: get rid of efi_get_max_fdt_addr()
  efi/efi_test: read RuntimeServicesSupported
  efi: arm: reduce minimum alignment of uncompressed kernel
  efi: capsule: clean scatter-gather entries from the D-cache
  efi: capsule: use atomic kmap for transient sglist mappings
  efi: x86/xen: switch to efi_get_secureboot_mode helper
  arm64/ima: add ima_arch support
  ima: generalize x86/EFI arch glue for other EFI architectures
  efi: generalize efi_get_secureboot
  efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
  efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
  efi/libstub/x86: simplify efi_is_native()
2020-12-24 12:40:07 -08:00
Linus Torvalds
c45647f9f5 ARM updates for 5.11:
- Rework phys/virt translation
 - Add KASan support
 - Move DT out of linear map region
 - Use more PC-relative addressing in assembly
 - Remove FP emulation handling while in kernel mode
 - Link with '-z norelro'
 - remove old check for GCC <= 4.2 in ARM unwinder code
 - disable big endian if using clang's linker
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl/ghq0ACgkQ9OeQG+St
 rGQXsxAAilC+P06NRN3etSFOnJH8GzGNu89wbVW/0lft89o+EpN8oZ9kEYRdb4d1
 AJ1z4kGN0akKKNWWeg+1c2YzXh4xGvT1th1TzbBpCf8BxoMHFCSS1IZ98LZ3iiqy
 bpMRpq2LJG+Va/5lkPnkY7e2sL9Jj5BxFdHAYUUg1Ipc0tfh7hXWLnRMohE1EYmu
 E69AHTfyWs9ojgspCSg3KoUQ3eXUiaBslf8U4/zFhtmA9lwiOOozZ4ZRRgDWqI75
 bp6pGzxpqXIFdD1QyThgSb3gvVBahbsYN7kj1fmD5LokBVWxHawCyzkCzNzKEfDL
 ES+gc/wTewxwN928cjB5vfmOrAvd1T6amh/gsr39WnOIFngEPAGMBfApXAzhffsc
 L5TYaDI3DNbQ75FCySfVV2VwQhSW03XQHYtElVxzc2Z1Q1Q9yoscqLzgHDgDy3LM
 8s4CRviVtOzP9e/rNx48lUxgdQHmAjQ+dI4Y9NVxyphQzK0LLTv5Uc4zy/nG0F27
 QIFtGCDz3PHDPWLzGBudYcu9HAqwXVhZXf9pMeYgwgvmqBdz0BFbXhEbZaup6oDl
 H5k4iAZh3ADW38+8Vhp/D7CGDhznZm2dFNrgreJm2tHTEwd5xgpsUj1MaAMCcPbr
 HTxiy0i4p9wN1jl9iWFD4A3/KsBvAIJFB+wqqJOyWku0FikntjU=
 =fZGX
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux

Pull ARM updates from Russell King:

 - Rework phys/virt translation

 - Add KASan support

 - Move DT out of linear map region

 - Use more PC-relative addressing in assembly

 - Remove FP emulation handling while in kernel mode

 - Link with '-z norelro'

 - remove old check for GCC <= 4.2 in ARM unwinder code

 - disable big endian if using clang's linker

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
  ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
  ARM: 9038/1: Link with '-z norelro'
  ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
  ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
  ARM: 9035/1: uncompress: Add be32tocpu macro
  ARM: 9033/1: arm/smp: Drop the macro S(x,s)
  ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
  ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
  ARM: 9044/1: vfp: use undef hook for VFP support detection
  ARM: 9034/1: __div64_32(): straighten up inline asm constraints
  ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
  ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
  ARM: 9028/1: disable KASAN in call stack capturing routines
  ARM: 9026/1: unwind: remove old check for GCC <= 4.2
  ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
  ARM: 9024/1: Drop useless cast of "u64" to "long long"
  ARM: 9023/1: Spelling s/mmeory/memory/
  ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
  ARM: kvm: replace open coded VA->PA calculations with adr_l call
  ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
  ...
2020-12-22 13:34:27 -08:00
Russell King
ecbbb88727 Merge branch 'devel-stable' into for-next 2020-12-21 11:19:26 +00:00
Russell King
8cc9251737 Merge branches 'fixes' and 'misc' into for-next 2020-12-21 11:19:24 +00:00
Anshuman Khandual
76460d613d ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
Macros used as functions can be problematic from the compiler perspective.
There was a build failure report caused primarily because of non reference
of an argument variable. Hence convert PUD level pgtable helper macros into
functions in order to avoid such problems in the future. In the process, it

fixes the argument variables sequence in set_pud() which probably remained
hidden for being a macro.

https://lore.kernel.org/linux-mm/202011020749.5XQ3Hfzc-lkp@intel.com/
https://lore.kernel.org/linux-mm/5fa49698.Vu2O3r+dU20UoEJ+%25lkp@intel.com/

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21 11:19:19 +00:00
Linus Torvalds
e2ae634014 RISC-V Patches for the 5.11 Merge Window, Part 1
We have a handful of new kernel features for 5.11:
 
 * Support for the contiguous memory allocator.
 * Support for IRQ Time Accounting
 * Support for stack tracing
 * Support for strict /dev/mem
 * Support for kernel section protection
 
 I'm being a bit conservative on the cutoff for this round due to the
 timing, so this is all the new development I'm going to take for this
 cycle (even if some of it probably normally would have been OK).  There
 are, however, some fixes on the list that I will likely be sending along
 either later this week or early next week.
 
 There is one issue in here: one of my test configurations
 (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the
 .text.init alignment patch.  With any luck we'll sort out the issue, but
 given how many bugs get fixed all over the place and how unrelated those
 features seem my guess is that we're just running into something that's
 been lurking for a while and has already been fixed in the newer QEMU
 (though I wouldn't be surprised if it's one of these implicit
 assumptions we have in the boot flow).  If it was hardware I'd be
 strongly inclined to look more closely, but given that users can upgrade
 their simulators I'm less worried about it.
 
 There are two merge conflicts, both in build files.  They're both a bit
 clunky: arch/riscv/Kconfig is out of order (I have a script that's
 supposed to keep them in order, I'll fix it) and lib/Makefile is out of
 order (though GENERIC_LIB here doesn't mean quite what it does above).
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl/cHO4THHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiTlmD/4uDyNHBM1XH/XD4fSEwTYJvGLqt/Jo
 vtrGR/fm0SlQFUKCcywSzxcVAeGn56CACbEIDYLuL4xXRJmbwEuaRrHVx2sEhS9p
 pNhy+wus/SgDz5EUAawMyR2AEWgzl77hY5T/+AAo4yv65SGGBfsIdz5noIVwGNqW
 r0g5cw2O99z0vwu1aSrK4isWHconG9MfQnnVyepPSh67pyWS4aUCr1K3vLiqD2dE
 XcgtwdcgzUIY5aEoJNrWo5qTrcaG8m6MRNCDAKJ6MKdDA2wdGIN868G0wQnoURRm
 Y+yW7w3P20kM0b87zH50jujTWg38NBKOfaXb0mAfawZMapL60veTVmvs2kNtFXCy
 F6JWRkgTiRnGY72FtRR0igWXT5M7fz0EiLFXLMItGcgj79TUget4l/3sRMN47S/O
 cA/WiwptJH3mh8IkL6z5ZxWEThdOrbFt8F1T+Gyq/ayblcPnJaLn/wrWoeOwviWR
 fvEC7smuF5SBTbWZK5tBOP21Nvhb7bfr49Sgr8Tvdjl15tz97qK+2tsLXwkBoQnJ
 wU45jcXfzr5wgiGBOQANRite5bLsJ0TuOrTgA5gsGpv+JSDGbpcJbm0833x00nX/
 3GsW5xr+vsLCvljgPAtKsyDNRlGQu908Gxrat2+s8u92bLr1bwn30uKL5h6i/n1w
 QgWATuPPGXZZdw==
 =GWIH
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "We have a handful of new kernel features for 5.11:

   - Support for the contiguous memory allocator.

   - Support for IRQ Time Accounting

   - Support for stack tracing

   - Support for strict /dev/mem

   - Support for kernel section protection

  I'm being a bit conservative on the cutoff for this round due to the
  timing, so this is all the new development I'm going to take for this
  cycle (even if some of it probably normally would have been OK). There
  are, however, some fixes on the list that I will likely be sending
  along either later this week or early next week.

  There is one issue in here: one of my test configurations
  (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
  the .text.init alignment patch.

  With any luck we'll sort out the issue, but given how many bugs get
  fixed all over the place and how unrelated those features seem my
  guess is that we're just running into something that's been lurking
  for a while and has already been fixed in the newer QEMU (though I
  wouldn't be surprised if it's one of these implicit assumptions we
  have in the boot flow). If it was hardware I'd be strongly inclined to
  look more closely, but given that users can upgrade their simulators
  I'm less worried about it"

* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  arm64: Use the generic devmem_is_allowed()
  arm: Use the generic devmem_is_allowed()
  RISC-V: Use the new generic devmem_is_allowed()
  lib: Add a generic version of devmem_is_allowed()
  riscv: Fixed kernel test robot warning
  riscv: kernel: Drop unused clean rule
  riscv: provide memmove implementation
  RISC-V: Move dynamic relocation section under __init
  RISC-V: Protect all kernel sections including init early
  RISC-V: Align the .init.text section
  RISC-V: Initialize SBI early
  riscv: Enable ARCH_STACKWALK
  riscv: Make stack walk callback consistent with generic code
  riscv: Cleanup stacktrace
  riscv: Add HAVE_IRQ_TIME_ACCOUNTING
  riscv: Enable CMA support
  riscv: Ignore Image.* and loader.bin
  riscv: Clean up boot dir
  riscv: Fix compressed Image formats build
  RISC-V: Add kernel image sections to the resource tree
2020-12-18 10:43:07 -08:00
Linus Torvalds
005b2a9dc8 tif-task_work.arch-2020-12-14
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/YJxsQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjpyEACBdW+YjenjTbkUPeEXzQgkBkTZUYw3g007
 DPcUT1g8PQZXYXlQvBKCvGhhIr7/KVcjepKoowiNQfBNGcIPJTVopW58nzpqAfTQ
 goI2WYGn5EKFFKBPvtH04cJD/Wo8muXdxynKtqyZbnGGgZjQxPrE259b8dpHjBSR
 6L7HHkk0D1oU/5b6h6Ocpg9mc/0iIUCZylySAYY3eGO0JaVPJaXgZSJZYgHxCHll
 Lb+/y/fXdtm/0PmQ3ko0ev54g3yEWqZIX0NsZW1asrButIy+KLzQ2Mz1xFLFDMag
 prtIfwb8tzgc4dFPY090C/azjCh5CPpxqYS6FkRwS0p86n6OhkyXrqfily5Hs4/B
 NC7CBPBSH/j+NKUK7CYZcpTzTpxPjUr9p0anUdlvMJz8FhTb/3YEEZ1UTeWOeHmk
 Yo5SxnFghLeZZeZ1ok6rdymnVa7WEX12SCLGQX31BB2mld0tNbKb4b+FsBF6OUMk
 IUaX6OjwDFVRaysC88BQ4hjcIP1HxsViG4/VZDX15gjAAH2Pvb+7tev+lcDcOhjz
 TCD4GNFspTFzRhh9nT7oxQ679qCh9G9zHbzuIRewnrS6iqvo5SJQB3dR2yrWZRRH
 ySkQFiHpYOlnLJYv0jg9COlGwo2FUdcvKhCvkjQKKBz48rzW/IC0LwKdRQWZDFk3
 FKGzP/NBig==
 =cadT
 -----END PGP SIGNATURE-----

Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block

Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
 "This sits on top of of the core entry/exit and x86 entry branch from
  the tip tree, which contains the generic and x86 parts of this work.

  Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.

  With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
  signal.c, and also remove a deadlock work-around in io_uring around
  knowing that signal based task_work waking is invoked with the sighand
  wait queue head lock.

  The motivation for this work is to decouple signal notify based
  task_work, of which io_uring is a heavy user of, from sighand. The
  sighand lock becomes a huge contention point, particularly for
  threaded workloads where it's shared between threads. Even outside of
  threaded applications it's slower than it needs to be.

  Roman Gershman <romger@amazon.com> reported that his networked
  workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
  after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
  spent hammering on the sighand lock, showing 57% of the CPU time there
  [1].

  There are further cleanups possible on top of this. One example is
  TIF_PATCH_PENDING, where a patch already exists to use
  TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
  consolidation, but the work stands on its own as well"

[1] https://github.com/axboe/liburing/issues/215

* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
  io_uring: remove 'twa_signal_ok' deadlock work-around
  kernel: remove checking for TIF_NOTIFY_SIGNAL
  signal: kill JOBCTL_TASK_WORK
  io_uring: JOBCTL_TASK_WORK is no longer used by task_work
  task_work: remove legacy TWA_SIGNAL path
  sparc: add support for TIF_NOTIFY_SIGNAL
  riscv: add support for TIF_NOTIFY_SIGNAL
  nds32: add support for TIF_NOTIFY_SIGNAL
  ia64: add support for TIF_NOTIFY_SIGNAL
  h8300: add support for TIF_NOTIFY_SIGNAL
  c6x: add support for TIF_NOTIFY_SIGNAL
  alpha: add support for TIF_NOTIFY_SIGNAL
  xtensa: add support for TIF_NOTIFY_SIGNAL
  arm: add support for TIF_NOTIFY_SIGNAL
  microblaze: add support for TIF_NOTIFY_SIGNAL
  hexagon: add support for TIF_NOTIFY_SIGNAL
  csky: add support for TIF_NOTIFY_SIGNAL
  openrisc: add support for TIF_NOTIFY_SIGNAL
  sh: add support for TIF_NOTIFY_SIGNAL
  um: add support for TIF_NOTIFY_SIGNAL
  ...
2020-12-16 12:33:35 -08:00
Linus Torvalds
e994cc240a seccomp updates for v5.11-rc1
- Improve seccomp performance via constant-action bitmaps (YiFei Zhu & Kees Cook)
 
 - Fix bogus __user annotations (Jann Horn)
 
 - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl/ZG5IACgkQiXL039xt
 wCbhuw/+P77jwT/p1DRnKp5vG7TXTqqXrdhQZYNyBUxRaKSGCEMydvJn/h3KscyW
 4eEy9vZKTAhIQg5oI5OXZ9jxzFdpxEg8lMPSKReNEga3d0//H9gOJHYc782D/bf1
 +6x6I4qWv+LMM/52P60gznBH+3WFVtyM5Jw+LF5igOCEVSERoZ3ChsmdSZgkALG0
 DJXKL+Dy1Wj9ESeBtuh1UsKoh4ADTAoPC+LvfGuxn2T+VtnxX/sOSDkkrpHfX+2J
 UKkIgWJHeNmq74nwWjpNuDz24ARTiVWOVQX01nOHRohtu39TZcpU774Pdp4Dsj2W
 oDDwOzIWp4/27aQxkOKv6NXMwd29XbrpH1gweyuvQh9cohSbzx6qZlXujqyd9izs
 6Nh74mvC3cns6sQWSWz5ddU4dMQ4rNjpD2CK1P8A7ZVTfH+5baaPmF8CRp126E6f
 /MAUk7Rfbe6YfYdfMwhXXhTvus0e5yenGFXr46gasJDfGnyy4cLS/MO7AZ+mR0CB
 d9DnrsIJVggL5cZ2LZmivIng18JWnbkgnenmHSXahdLstmYVkdpo4ckBl1G/dXK0
 lDmi9j9FoTxB6OrztEKA0RZB+C1e6q7X7euwsHjgF9XKgD5S+DdeYwqd2lypjyvb
 d9VNLFdngD0CRY7wcJZKRma+yPemlPNurdMjF9LrqaAu232G1UA=
 =jJwG
 -----END PGP SIGNATURE-----

Merge tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull seccomp updates from Kees Cook:
 "The major change here is finally gaining seccomp constant-action
  bitmaps, which internally reduces the seccomp overhead for many
  real-world syscall filters to O(1), as discussed at Plumbers this
  year.

   - Improve seccomp performance via constant-action bitmaps (YiFei Zhu
     & Kees Cook)

   - Fix bogus __user annotations (Jann Horn)

   - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)"

* tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: Update kernel config
  seccomp: Remove bogus __user annotations
  seccomp/cache: Report cache data through /proc/pid/seccomp_cache
  xtensa: Enable seccomp architecture tracking
  sh: Enable seccomp architecture tracking
  s390: Enable seccomp architecture tracking
  riscv: Enable seccomp architecture tracking
  powerpc: Enable seccomp architecture tracking
  parisc: Enable seccomp architecture tracking
  csky: Enable seccomp architecture tracking
  arm: Enable seccomp architecture tracking
  arm64: Enable seccomp architecture tracking
  selftests/seccomp: Compare bitmap vs filter overhead
  x86: Enable seccomp architecture tracking
  seccomp/cache: Add "emulator" to check if filter is constant allow
  seccomp/cache: Lookup syscall allowlist bitmap for fast path
2020-12-16 11:30:10 -08:00
Linus Torvalds
7a932e5702 asm-generic: cross-architecture timer cleanup
This cleans up two ancient timer features that were never completed in
 the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
 
 There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
 of clocksource implementations, the ARM EBSA110 platform. Rather than
 changing to use modern timekeeping, we remove the platform entirely as
 Russell no longer uses his machine and nobody else seems to have one
 any more.
 
 The conditional code for using arch_gettimeoffset() is removed as
 a result.
 
 For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
 not using clockevent drivers: parisc, ia64, most of m68k, and one
 Arm platform. These all do timer ticks slighly differently, and this
 gets cleaned up to the point they at least all call the same helper
 function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
 in Kconfig, the polarity is now reversed, with the few remaining ones
 selecting LEGACY_TIMER_TICK instead.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1v8ACgkQmmx57+YA
 GNmCvQ/9EDlgCt92r8SB+LGafDtgB8TUQZeIrs9S2mByzdxwnw0lxObIXFCnhQgh
 RpG3dR+ONRDnC5eI149B377JOEFMZWe2+BtYHUHkFARtUEWatslQcz7yAGvVRK/l
 TS/qReb6piKltlzuanF1bMZbjy2OhlaDRcm+OlC3y5mALR33M4emb+rJ6cSdfk3K
 v1iZhrxtfQT77ztesh/oPkPiyQ6kNcz7SfpyYOb6f5VLlml2BZ7YwBSVyGY7urHk
 RL3XqOUP4KKlMEAI8w0E2nvft6Fk+luziBhrMYWK0GvbmI1OESENuX/c6tgT2OQ1
 DRaVHvcPG/EAY8adOKxxVyHhEJDSoz5GJV/EtjlOegsJk6RomczR1uuiT3Kvm7Ah
 PktMKv4xQht1E15KPSKbOvNIEP18w2s5z6gw+jVDv8pw42pVEQManm1D+BICqrhl
 fcpw6T1drf9UxAjwX4+zXtmNs+a+mqiFG8puU4VVgT4GpQ8umHvunXz2WUjZO0jc
 3m8ErJHBvtJwW5TOHGyXnjl9SkwPzHOfF6IcXTYWEDU4/gQIK9TwUvCjLc0lE27t
 FMCV2ds7/K1CXwRgpa5IrefSkb8yOXSbRZ56NqqF7Ekxw4J5bYRSaY7jb+qD/e+3
 5O1y+iPxFrpH+16hSahvzrtcdFNbLQvBBuRtEQOYuHLt2UJrNoU=
 =QpNs
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
 "This cleans up two ancient timer features that were never completed in
  the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.

  There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
  of clocksource implementations, the ARM EBSA110 platform. Rather than
  changing to use modern timekeeping, we remove the platform entirely as
  Russell no longer uses his machine and nobody else seems to have one
  any more.

  The conditional code for using arch_gettimeoffset() is removed as a
  result.

  For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
  not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
  platform. These all do timer ticks slighly differently, and this gets
  cleaned up to the point they at least all call the same helper
  function.

  Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
  Kconfig, the polarity is now reversed, with the few remaining ones
  selecting LEGACY_TIMER_TICK instead"

* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  timekeeping: default GENERIC_CLOCKEVENTS to enabled
  timekeeping: remove xtime_update
  m68k: remove timer_interrupt() function
  m68k: change remaining timers to legacy_timer_tick
  m68k: m68328: use legacy_timer_tick()
  m68k: sun3/sun3c: use legacy_timer_tick
  m68k: split heartbeat out of timer function
  m68k: coldfire: use legacy_timer_tick()
  parisc: use legacy_timer_tick
  ARM: rpc: use legacy_timer_tick
  ia64: convert to legacy_timer_tick
  timekeeping: add CONFIG_LEGACY_TIMER_TICK
  timekeeping: remove arch_gettimeoffset
  net: remove am79c961a driver
  ARM: remove ebsa110 platform
2020-12-16 00:07:17 -08:00
Linus Torvalds
157807123c asm-generic: mmu-context cleanup
This is a cleanup series from Nicholas Piggin, preparing for
 later changes. The asm/mmu_context.h header are generalized
 and common code moved to asm-gneneric/mmu_context.h.
 
 This saves a bit of code and makes it easier to change in
 the future.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1LsACgkQmmx57+YA
 GNm6kBAAq4/n6nuNnh6b9LhjXaZRG75gEyW7JvHl8KE5wmZHwDHqbwiQgU1b3lUs
 JJGbfKqi5ASKxNg6MpfYodmCOqeTUUYG0FUCb6lMhcxxMdfLTLYBvkNd6Y143M+T
 boi5b/iz+OUQdNPzlVeSsUEVsD59FIXmP/GhscWZN9VAyf/aLV2MDBIOhrDSJlPo
 ObexnP0Iw1E1NRQYDQ6L2dKTHa6XmHyUtw40ABPmd/6MSd1S+D+j3FGg+CYmvnzG
 k9g8FbNby8xtUfc0pZV4W/322WN8cDFF9bc04eTDZiAv1bk9lmfvWJ2bWjs3s2qt
 RO/suiZEOAta/WUX9vVLgYn2td00ef+AyjNUgffiUfvQfl++fiCDFTGl+MoCLjbh
 xQUPcRuRdED7bMKNrC0CcDOSwWEBWVXvkU/szBLDeE1sPjXzGQ80q1Y72k9y961I
 mqg7FrHqjZsxT9luXMAzClHNhXAtvehkJZBIdHlFok83EFoTQp48Da4jaDuOOhlq
 p/lkPJWOHegIQMWtGwRyGmG1qzil7b/QBNAPLgu9pF4TA+ySRBEB2BOr2jRSkj6N
 mNTHQbSYxBoktdt+VhtrSsxR+i8lwlegx+RNRFmKK3VH5da2nfiBaOY7zBQQHxCK
 yxQvXvsljSVpfkFKLc/S2nLQL1zTkRfFKV1Xmd3+3owR+EoqM60=
 =NpMX
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic mmu-context cleanup from Arnd Bergmann:
 "This is a cleanup series from Nicholas Piggin, preparing for later
  changes. The asm/mmu_context.h header are generalized and common code
  moved to asm-gneneric/mmu_context.h.

  This saves a bit of code and makes it easier to change in the future"

* tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits)
  h8300: Fix generic mmu_context build
  m68k: mmu_context: Fix Sun-3 build
  xtensa: use asm-generic/mmu_context.h for no-op implementations
  x86: use asm-generic/mmu_context.h for no-op implementations
  um: use asm-generic/mmu_context.h for no-op implementations
  sparc: use asm-generic/mmu_context.h for no-op implementations
  sh: use asm-generic/mmu_context.h for no-op implementations
  s390: use asm-generic/mmu_context.h for no-op implementations
  riscv: use asm-generic/mmu_context.h for no-op implementations
  powerpc: use asm-generic/mmu_context.h for no-op implementations
  parisc: use asm-generic/mmu_context.h for no-op implementations
  openrisc: use asm-generic/mmu_context.h for no-op implementations
  nios2: use asm-generic/mmu_context.h for no-op implementations
  nds32: use asm-generic/mmu_context.h for no-op implementations
  mips: use asm-generic/mmu_context.h for no-op implementations
  microblaze: use asm-generic/mmu_context.h for no-op implementations
  m68k: use asm-generic/mmu_context.h for no-op implementations
  ia64: use asm-generic/mmu_context.h for no-op implementations
  hexagon: use asm-generic/mmu_context.h for no-op implementations
  csky: use asm-generic/mmu_context.h for no-op implementations
  ...
2020-12-15 23:58:04 -08:00
Linus Torvalds
37373d9c37 Merge branch 'regset.followup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull regset updates from Al Viro:
 "Dead code removal, mostly.

  The only exception is a bit of cleanups on itanic (getting rid of
  redundant stack unwinds - each access_uarea() call does it and we call
  that 7 times in a row in ptrace_[sg]etregs(), *after* having done it
  ourselves in the caller; location where the user registers have been
  spilled won't change under us, and we can bloody well just call
  access_elf_reg() directly, giving it the unw_frame_info we'd
  calculated for our own purposes)"

* 'regset.followup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  c6x: kill ELF_CORE_COPY_FPREGS
  whack-a-mole: USE_ELF_CORE_DUMP
  [ia64] ptrace_[sg]etregs(): use access_elf_reg() instead of access_uarea()
  [ia64] missed cleanups from switch to regset coredumps
  arm: kill dump_task_regs()
2020-12-15 19:09:44 -08:00
Linus Torvalds
2cffa11e2a Generic interrupt and irqchips subsystem:
Core:
 
      - Consolidation and robustness changes for irq time accounting
 
      - Cleanup and consolidation of irq stats
 
      - Remove the fasteoi IPI flow which has been proved useless
 
      - Provide an interface for converting legacy interrupt mechanism into
        irqdomains
 
  Drivers:
 
      The rare event of not having completely new chip driver code, just new
      DT bindings and extensions of existing drivers to accomodate new
      variants!
 
      - Preliminary support for managed interrupts on platform devices
 
      - Correctly identify allocation of MSIs proxyied by another device
 
      - Generalise the Ocelot support to new SoCs
 
      - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
 
      - Work around spurious interrupts on Qualcomm PDC
 
      - Random fixes and cleanups
 
 Thanks,
 
 	tglx
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/YwZgTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoW4CD/90rTi1OQrMe3nb5okVjUZmktz/K3BN
 Cl5+evFiXiNoH+yJSMIVP+8eMAtBH6RgoaD0EUtSYmgzb9h/JRRQYwtPxobXcMb2
 2xcWyLPJkVJL431JKNM8BBRYjLA2VnQ6Ia+Kx3BxqpgKXn5+cEMh1dwIy27Ll2rj
 +2NHAQe1sHL7o/KcCDhYqbVIDjw5K/d7YPwjEuPeEoNv1DOxrOCdCEfgFN0jBtRE
 CoaRTBskeAaHIzHNp47Mxyz43g4tA/D8kB68X0OjpEykVkPUbgNK1FHSwaPbIsFT
 FTSPU3zg8Q6DZ+RGyjNJykIFgUbirlJxARk2c6Ct8Kc3DN6K1jQt4EsU7CXRCc98
 BTBjUNeFeNj3irZ4GHhyMKOQJCA1Z5nCRfBUGiW6gK8183us3BLfH5DM1zEsAYUh
 DCp+UKsLuXhbB80EWq7kl82/2mNGZ8En8EerE6XJA7Z3JN8FplOHEuLezYYzwzbb
 RIes971Vc50J2u2Wf/M2c3PDz3D/4FzfwUeA4LJfTnmOL09RYZ8CsqSckpx4ku/F
 XiBnjwtGEpDXWJ8z13DC7yONrxFGByV19+sqHTBlub5DmIs0gXjhC0dKAPAruUIS
 iCC+Vx6xLgOpTDu8shFsjibbi9Hb6vuZrF2Te+WR5Rf7d80C0J4b5K5PS4daUjr6
 IuD2tz+3CtPjHw==
 =iytv
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Generic interrupt and irqchips subsystem updates. Unusually, there is
  not a single completely new irq chip driver, just new DT bindings and
  extensions of existing drivers to accomodate new variants!

  Core:

   - Consolidation and robustness changes for irq time accounting

   - Cleanup and consolidation of irq stats

   - Remove the fasteoi IPI flow which has been proved useless

   - Provide an interface for converting legacy interrupt mechanism into
     irqdomains

  Drivers:

   - Preliminary support for managed interrupts on platform devices

   - Correctly identify allocation of MSIs proxyied by another device

   - Generalise the Ocelot support to new SoCs

   - Improve GICv4.1 vcpu entry, matching the corresponding KVM
     optimisation

   - Work around spurious interrupts on Qualcomm PDC

   - Random fixes and cleanups"

* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
  driver core: platform: Add devm_platform_get_irqs_affinity()
  ACPI: Drop acpi_dev_irqresource_disabled()
  resource: Add irqresource_disabled()
  genirq/affinity: Add irq_update_affinity_desc()
  irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
  irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
  platform-msi: Track shared domain allocation
  irqchip/ti-sci-intr: Fix freeing of irqs
  irqchip/ti-sci-inta: Fix printing of inta id on probe success
  drivers/irqchip: Remove EZChip NPS interrupt controller
  Revert "genirq: Add fasteoi IPI flow"
  irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
  irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
  irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
  irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
  irqchip/ocelot: Add support for Jaguar2 platforms
  irqchip/ocelot: Add support for Serval platforms
  irqchip/ocelot: Add support for Luton platforms
  irqchip/ocelot: prepare to support more SoC
  ...
2020-12-15 15:03:31 -08:00
Thomas Gleixner
3c41e57a1e irqchip updates for Linux 5.11
- Preliminary support for managed interrupts on platform devices
 - Correctly identify allocation of MSIs proxyied by another device
 - Remove the fasteoi IPI flow which has been proved useless
 - Generalise the Ocelot support to new SoCs
 - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
 - Work around spurious interrupts on Qualcomm PDC
 - Random fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl/Uxq8PHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDoW0P/0ZMDvFPxrfnJD46exUgUOPuuFF8jZxAlxD8
 7UExqar7u6yX7bbq394jPgtOOxldDagfCx/jCXgb9ja7DK5EHKRcrfjaDT8knHi2
 Keg5RaRMRi9TVltvWQTxAkXwSv0Atl881qqsndPeZCez0GNZp+HB34s+rNkZwBOu
 MBrWihMQOSv5QE6milsNc7HXLSHM1eLZ7Y2XgumNtKrIGEX9yZI7qwdMofwP8Za3
 ayMOvc1WAWaTJI7Mg5ac1yTCVbqLmRHhCtws6c6DMgaRu6SI0itmbpQzkDuJJIe3
 k9h4KQPaKAFcQsoo3GV0MKTMm63eq82XT3CAdv+htYRY1z95D2+nzNK+mJtsGptX
 gJ2zeJkUb4u+yVtNguL9qjo5ssCXV/6IybJxv6baaEFnSwQMUwqa066NdxmtqfIe
 1BOWnc153a7SRbQ34M9/llje+v8YJbueGMS2RFR2LQ6IjjpaHsXh+YCZokfA/kdk
 zGbOUD5WWFtFD1T3UoaJ4gFt+pzHjNqym4CcEj4S1Vf5y+POUkNmC+GYK+xfm2Fp
 WJMbdIUxJhHFRD9L1ShtfAVUSbp712VOOdILp9rYAkOdqfb51BVUiMUP++s2dGp1
 ZIT78qt7kTKT1CxbDdFAjzsi7RoMqdSGYgKmG4sVprELeZnFwq47nBkBr8XEQ1TT
 0ccEUOY8
 =7Z24
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates for 5.11 from Marc Zyngier:

  - Preliminary support for managed interrupts on platform devices
  - Correctly identify allocation of MSIs proxyied by another device
  - Remove the fasteoi IPI flow which has been proved useless
  - Generalise the Ocelot support to new SoCs
  - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
  - Work around spurious interrupts on Qualcomm PDC
  - Random fixes and cleanups

Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
2020-12-15 10:48:07 +01:00
Linus Torvalds
edd7ab7684 The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic implementation
     which builds the base for the kmap_local() API and make the
     kmap_atomic() interface wrappers which handle the disabling/enabling of
     preemption and pagefaults.
 
   - Switch the storage from per-CPU to per task and provide scheduler
     support for clearing mapping when scheduling out and restoring them
     when scheduling back in.
 
   - Merge the migrate_disable/enable() code, which is also part of the
     scheduler pull request. This was required to make the kmap_local()
     interface available which does not disable preemption when a mapping
     is established. It has to disable migration instead to guarantee that
     the virtual address of the mapped slot is the same accross preemption.
 
   - Provide better debug facilities: guard pages and enforced utilization
     of the mapping mechanics on 64bit systems when the architecture allows
     it.
 
   - Provide the new kmap_local() API which can now be used to cleanup the
     kmap_atomic() usage sites all over the place. Most of the usage sites
     do not require the implicit disabling of preemption and pagefaults so
     the penalty on 64bit and 32bit non-highmem systems is removed and quite
     some of the code can be simplified. A wholesale conversion is not
     possible because some usage depends on the implicit side effects and
     some need to be cleaned up because they work around these side effects.
 
     The migrate disable side effect is only effective on highmem systems
     and when enforced debugging is enabled. On 64bit and 32bit non-highmem
     systems the overhead is completely avoided.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XyQwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoUolD/9+R+BX96fGir+I8rG9dc3cbLw5meSi
 0I/Nq3PToZMs2Iqv50DsoaPYHHz/M6fcAO9LRIgsE9jRbnY93GnsBM0wU9Y8yQaT
 4wUzOG5WHaLDfqIkx/CN9coUl458oEiwOEbn79A2FmPXFzr7IpkufnV3ybGDwzwP
 p73bjMJMPPFrsa9ig87YiYfV/5IAZHi82PN8Cq1v4yNzgXRP3Tg6QoAuCO84ZnWF
 RYlrfKjcJ2xPdn+RuYyXolPtxr1hJQ0bOUpe4xu/UfeZjxZ7i1wtwLN9kWZe8CKH
 +x4Lz8HZZ5QMTQ9sCHOLtKzu2MceMcpISzoQH4/aFQCNMgLn1zLbS790XkYiQCuR
 ne9Cua+IqgYfGMG8cq8+bkU9HCNKaXqIBgPEKE/iHYVmqzCOqhW5Cogu4KFekf6V
 Wi7pyyUdX2en8BAWpk5NHc8de9cGcc+HXMq2NIcgXjVWvPaqRP6DeITERTZLJOmz
 XPxq5oPLGl7wdm7z+ICIaNApy8zuxpzb6sPLNcn7l5OeorViORlUu08AN8587wAj
 FiVjp6ZYomg+gyMkiNkDqFOGDH5TMENpOFoB0hNNEyJwwS0xh6CgWuwZcv+N8aPO
 HuS/P+tNANbD8ggT4UparXYce7YCtgOf3IG4GA3JJYvYmJ6pU+AZOWRoDScWq4o+
 +jlfoJhMbtx5Gg==
 =n71I
 -----END PGP SIGNATURE-----

Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull kmap updates from Thomas Gleixner:
 "The new preemtible kmap_local() implementation:

   - Consolidate all kmap_atomic() internals into a generic
     implementation which builds the base for the kmap_local() API and
     make the kmap_atomic() interface wrappers which handle the
     disabling/enabling of preemption and pagefaults.

   - Switch the storage from per-CPU to per task and provide scheduler
     support for clearing mapping when scheduling out and restoring them
     when scheduling back in.

   - Merge the migrate_disable/enable() code, which is also part of the
     scheduler pull request. This was required to make the kmap_local()
     interface available which does not disable preemption when a
     mapping is established. It has to disable migration instead to
     guarantee that the virtual address of the mapped slot is the same
     across preemption.

   - Provide better debug facilities: guard pages and enforced
     utilization of the mapping mechanics on 64bit systems when the
     architecture allows it.

   - Provide the new kmap_local() API which can now be used to cleanup
     the kmap_atomic() usage sites all over the place. Most of the usage
     sites do not require the implicit disabling of preemption and
     pagefaults so the penalty on 64bit and 32bit non-highmem systems is
     removed and quite some of the code can be simplified. A wholesale
     conversion is not possible because some usage depends on the
     implicit side effects and some need to be cleaned up because they
     work around these side effects.

     The migrate disable side effect is only effective on highmem
     systems and when enforced debugging is enabled. On 64bit and 32bit
     non-highmem systems the overhead is completely avoided"

* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  ARM: highmem: Fix cache_is_vivt() reference
  x86/crashdump/32: Simplify copy_oldmem_page()
  io-mapping: Provide iomap_local variant
  mm/highmem: Provide kmap_local*
  sched: highmem: Store local kmaps in task struct
  x86: Support kmap_local() forced debugging
  mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
  mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
  microblaze/mm/highmem: Add dropped #ifdef back
  xtensa/mm/highmem: Make generic kmap_atomic() work correctly
  mm/highmem: Take kmap_high_get() properly into account
  highmem: High implementation details and document API
  Documentation/io-mapping: Remove outdated blurb
  io-mapping: Cleanup atomic iomap
  mm/highmem: Remove the old kmap_atomic cruft
  highmem: Get rid of kmap_types.h
  xtensa/mm/highmem: Switch to generic kmap atomic
  sparc/mm/highmem: Switch to generic kmap atomic
  powerpc/mm/highmem: Switch to generic kmap atomic
  nds32/mm/highmem: Switch to generic kmap atomic
  ...
2020-12-14 18:35:53 -08:00
Linus Torvalds
0ca2ce81eb arm64 updates for 5.11:
- Expose tag address bits in siginfo. The original arm64 ABI did not
   expose any of the bits 63:56 of a tagged address in siginfo. In the
   presence of user ASAN or MTE, this information may be useful. The
   implementation is generic to other architectures supporting tags (like
   SPARC ADI, subject to wiring up the arch code). The user will have to
   opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra bits, if
   available, become visible in si_addr.
 
 - Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
   lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
   detriment of other platforms. With these changes, the kernel scans the
   Device Tree dma-ranges and the ACPI IORT information before deciding
   on a smaller ZONE_DMA.
 
 - Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
   with LTO, there is an increased risk of the compiler converting an
   address dependency headed by a READ_ONCE() invocation into a control
   dependency and consequently allowing for harmful reordering by the
   CPU.
 
 - Add CPPC FFH support using arm64 AMU counters.
 
 - set_fs() removal on arm64. This renders the User Access Override (UAO)
   ARMv8 feature unnecessary.
 
 - Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
   identifier file for SMMUv3, stop event counters support for i.MX8MP,
   enable the perf events-based hard lockup detector.
 
 - Reorganise the kernel VA space slightly so that 52-bit VA
   configurations can use more virtual address space.
 
 - Improve the robustness of the arm64 memory offline event notifier.
 
 - Pad the Image header to 64K following the EFI header definition
   updated recently to increase the section alignment to 64K.
 
 - Support CONFIG_CMDLINE_EXTEND on arm64.
 
 - Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
   bits for PtrAuth.
 
 - Switch to vmapped shadow call stacks.
 
 - Miscellaneous clean-ups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl/XcSgACgkQa9axLQDI
 XvGkwg//SLknimELD/cphf2UzZm5RFuCU0x1UnIXs9XYo5BrOpgVLLA//+XkCrKN
 0GLAdtBDfw1axWJudzgMBiHrv6wSGh4p3YWjLIW06u/PJu3m3U8oiiolvvF8d7Yq
 UKDseKGQnQkrl97J0SyA+Da/u8D11GEzp52SWL5iRxzt6vInEC27iTOp9n1yoaoP
 f3y7qdp9kv831ryUM3rXFYpc8YuMWXk+JpBSNaxqmjlvjMzipA5PhzBLmNzfc657
 XcrRX5qsgjEeJW8UUnWUVNB42j7tVzN77yraoUpoVVCzZZeWOQxqq5EscKPfIhRt
 AjtSIQNOs95ZVE0SFCTjXnUUb823coUs4dMCdftqlE62JNRwdR+3bkfa+QjPTg1F
 O9ohW1AzX0/JB19QBxMaOgbheB8GFXh3DVJ6pizTgxJgyPvQQtFuEhT1kq8Cst0U
 Pe+pEWsg9t41bUXNz+/l9tUWKWpeCfFNMTrBXLmXrNlTLeOvDh/0UiF0+2lYJYgf
 YAboibQ5eOv2wGCcSDEbNMJ6B2/6GtubDJxH4du680F6Emb6pCSw0ntPwB7mSGLG
 5dXz+9FJxDLjmxw7BXxQgc5MoYIrt5JQtaOQ6UxU8dPy53/+py4Ck6tXNkz0+Ap7
 gPPaGGy1GqobQFu3qlHtOK1VleQi/sWcrpmPHrpiiFUf6N7EmcY=
 =zXFk
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - Expose tag address bits in siginfo. The original arm64 ABI did not
   expose any of the bits 63:56 of a tagged address in siginfo. In the
   presence of user ASAN or MTE, this information may be useful. The
   implementation is generic to other architectures supporting tags
   (like SPARC ADI, subject to wiring up the arch code). The user will
   have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
   bits, if available, become visible in si_addr.

 - Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
   lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
   detriment of other platforms. With these changes, the kernel scans
   the Device Tree dma-ranges and the ACPI IORT information before
   deciding on a smaller ZONE_DMA.

 - Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
   with LTO, there is an increased risk of the compiler converting an
   address dependency headed by a READ_ONCE() invocation into a control
   dependency and consequently allowing for harmful reordering by the
   CPU.

 - Add CPPC FFH support using arm64 AMU counters.

 - set_fs() removal on arm64. This renders the User Access Override
   (UAO) ARMv8 feature unnecessary.

 - Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
   identifier file for SMMUv3, stop event counters support for i.MX8MP,
   enable the perf events-based hard lockup detector.

 - Reorganise the kernel VA space slightly so that 52-bit VA
   configurations can use more virtual address space.

 - Improve the robustness of the arm64 memory offline event notifier.

 - Pad the Image header to 64K following the EFI header definition
   updated recently to increase the section alignment to 64K.

 - Support CONFIG_CMDLINE_EXTEND on arm64.

 - Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
   bits for PtrAuth.

 - Switch to vmapped shadow call stacks.

 - Miscellaneous clean-ups.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
  perf/imx_ddr: Add system PMU identifier for userspace
  bindings: perf: imx-ddr: add compatible string
  arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
  arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
  arm64: mark __system_matches_cap as __maybe_unused
  arm64: uaccess: remove vestigal UAO support
  arm64: uaccess: remove redundant PAN toggling
  arm64: uaccess: remove addr_limit_user_check()
  arm64: uaccess: remove set_fs()
  arm64: uaccess cleanup macro naming
  arm64: uaccess: split user/kernel routines
  arm64: uaccess: refactor __{get,put}_user
  arm64: uaccess: simplify __copy_user_flushcache()
  arm64: uaccess: rename privileged uaccess routines
  arm64: sdei: explicitly simulate PAN/UAO entry
  arm64: sdei: move uaccess logic to arch/arm64/
  arm64: head.S: always initialize PSTATE
  arm64: head.S: cleanup SCTLR_ELx initialization
  arm64: head.S: rename el2_setup -> init_kernel_el
  arm64: add C wrappers for SET_PSTATE_*()
  ...
2020-12-14 16:24:30 -08:00
Ard Biesheuvel
d72c8b0e1c efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
Ensure that EFI_PHYS_ALIGN is an unsigned type, to prevent spurious
warnings from the type checks in the definition of the max() macro.

Link: https://lore.kernel.org/linux-efi/20201213151306.73558-1-ardb@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-12-14 16:25:06 +01:00
Palmer Dabbelt
7d95a88f92
Add and use a generic version of devmem_is_allowed()
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an
implementation of devmem_is_allowed() that's exactly the same as the version in
a handful of other ports.  Rather than duplicate code, I've put a generic
version of this in lib/ and used it for the RISC-V port.

* palmer/generic-devmem:
  arm64: Use the generic devmem_is_allowed()
  arm: Use the generic devmem_is_allowed()
  RISC-V: Use the new generic devmem_is_allowed()
  lib: Add a generic version of devmem_is_allowed()
2020-12-11 12:30:26 -08:00
Palmer Dabbelt
914ee96654
arm: Use the generic devmem_is_allowed()
This is exactly the same as the arm64 version, which I recently copied
into lib/ for use by the RISC-V port.

Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-11 12:28:24 -08:00
Ard Biesheuvel
54649911f3 efi: stub: get rid of efi_get_max_fdt_addr()
Now that ARM started following the example of arm64 and RISC-V, and
no longer imposes any restrictions on the placement of the FDT in
memory at boot, we no longer need per-arch implementations of
efi_get_max_fdt_addr() to factor out the differences. So get rid of
it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20201029134901.9773-1-ardb@kernel.org
2020-12-09 08:37:27 +01:00
Ard Biesheuvel
c0249238fe efi: arm: reduce minimum alignment of uncompressed kernel
Now that we reduced the minimum relative alignment between PHYS_OFFSET
and PAGE_OFFSET to 2 MiB, we can take this into account when allocating
memory for the decompressed kernel when booting via EFI. This minimizes
the amount of unusable memory we may end up with due to the base of DRAM
being occupied by firmware.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-12-09 08:37:27 +01:00
Ard Biesheuvel
4dbe44fb53 efi: capsule: clean scatter-gather entries from the D-cache
Scatter-gather lists passed to UpdateCapsule() should be cleaned
from the D-cache to ensure that they are visible to the CPU after a
warm reboot before the MMU is enabled. On ARM and arm64 systems, this
implies a D-cache clean by virtual address to the point of coherency.

However, due to the fact that the firmware itself is not able to map
physical addresses back to virtual addresses when running under the OS,
this must be done by the caller.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-12-09 08:37:27 +01:00
Nicolas Pitre
e64ab473dd ARM: 9034/1: __div64_32(): straighten up inline asm constraints
The ARM version of __div64_32() encapsulates a call to __do_div64 with
non-standard argument passing. In particular, __n is a 64-bit input
argument assigned to r0-r1 and __rem is an output argument sharing half
of that r0-r1 register pair.

With __n being an input argument, the compiler is in its right to
presume that r0-r1 would still hold the value of __n past the inline
assembly statement. Normally, the compiler would have assigned non
overlapping registers to __n and __rem if the value for __n is needed
again.

However, here we enforce our own register assignment and gcc fails to
notice the conflict. In practice this doesn't cause any problem as __n
is considered dead after the asm statement and *n is overwritten.
However this is not always guaranteed and clang rightfully complains.

Let's fix it properly by making __n into an input-output variable. This
makes it clear that those registers representing __n have been modified.
Then we can extract __rem as the high part of __n with plain C code.

This asm constraint "abuse" was likely relied upon back when gcc didn't
handle 64-bit values optimally. Turns out that gcc is now able to
optimize things and produces the same code with this patch applied.

Reported-by: Antony Yu <swpenim@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-08 10:15:52 +00:00
Arnd Bergmann
68061c02bb ARM: highmem: Fix cache_is_vivt() reference
The reference to cache_is_vivt() was moved into a header file,
which now causes a build failure in rare randconfig builds:

arch/arm/include/asm/highmem.h:52:43: error: implicit declaration of function 'cache_is_vivt' [-Werror,-Wimplicit-function-declaration]

Add an explicit include to make it build reliably.

Fixes: 2a15ba82fa ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20201204165930.3877571-1-arnd@kernel.org
2020-12-04 23:35:34 +01:00
Linus Torvalds
c84e1efae0 asm-generic: add correct MAX_POSSIBLE_PHYSMEM_BITS setting
This is a single bugfix for a bug that Stefan Agner found on 32-bit
 Arm, but that exists on several other architectures.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/BZx4ACgkQmmx57+YA
 GNnSPA/9HK0dwaGuXHRxKpt2ShHt5kOmixlmRJszYmuSIJde945EJNTP/+2l2Qs2
 TDXmOU8pdZSAZX2EHLLEksNsnhUoTBWzsn4WxHRTNVc2cYuHHA6PKMdAPV136ag/
 U0gnC7eCYKCDM3A1A/G4437PDI3vfm0Wzo6Biikxwhi861bshxjVs3DapDQw5+Zn
 bOS8CCNpmwpDC26ZAfIY8es32Hg063GhdJXQ01uqkaZLJdRn7ui6bkv18vi+b3gM
 QLeaubDT4+oH+HpJJpFZ01iugBFah5iJtg/JtWyap/LJSkelyjU9Gr7qrrpI7M3t
 hfDzk7fRjHO1XPn2bDc4InWJEoekE9vde5M0QKn3ID8dFO1M5tNqov2uH40m4fQD
 UM7irWe0BmP9Nms5LV7dMWChPn8FUEr34ZYAwF9B+YPL1Ec6GGn8mA/E0Iz8pre0
 MUgv5LZ8LYdeYvSSpXrgBkgv2pwni5rTc7/K9KtvGdkLQ3rOuihPBbPyR0YTYa8f
 UkboIky80lcx/uyhhu+OxWxe0q+Ug8WF87UkPIDDhsaF9W2DoErIwiCQhqS+AKs4
 9DiCBzLgF6mZ11ijK73DtLNBmQnKdssV9Bs5lnOO0XqYdoqiQ5gRJWrixvI0OWSa
 WGt66UV481rV/Oxlt1A/1lynYkZU0b121fFFB/EPbuFuUwZu9So=
 =xgYa
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fix from Arnd Bergmann:
 "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.

  This is a single bugfix for a bug that Stefan Agner found on 32-bit
  Arm, but that exists on several other architectures"

* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
2020-11-27 15:00:35 -08:00
Peter Collingbourne
23acdc76f1 signal: clear non-uapi flag bits when passing/returning sa_flags
Previously we were not clearing non-uapi flag bits in
sigaction.sa_flags when storing the userspace-provided sa_flags or
when returning them via oldact. Start doing so.

This allows userspace to detect missing support for flag bits and
allows the kernel to use non-uapi bits internally, as we are already
doing in arch/x86 for two flag bits. Now that this change is in
place, we no longer need the code in arch/x86 that was hiding these
bits from userspace, so remove it.

This is technically a userspace-visible behavior change for sigaction, as
the unknown bits returned via oldact.sa_flags are no longer set. However,
we are free to define the behavior for unknown bits exactly because
their behavior is currently undefined, so for now we can define the
meaning of each of them to be "clear the bit in oldact.sa_flags unless
the bit becomes known in the future". Furthermore, this behavior is
consistent with OpenBSD [1], illumos [2] and XNU [3] (FreeBSD [4] and
NetBSD [5] fail the syscall if unknown bits are set). So there is some
precedent for this behavior in other kernels, and in particular in XNU,
which is probably the most popular kernel among those that I looked at,
which means that this change is less likely to be a compatibility issue.

Link: [1] f634a6a4b5/sys/kern/kern_sig.c (L278)
Link: [2] 76f19f5fdc/usr/src/uts/common/syscall/sigaction.c (L86)
Link: [3] a449c6a3b8/bsd/kern/kern_sig.c (L480)
Link: [4] eded70c370/sys/kern/kern_sig.c (L699)
Link: [5] 3365779bec/sys/kern/sys_sig.c (L473)
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://linux-review.googlesource.com/id/I35aab6f5be932505d90f3b3450c083b4db1eca86
Link: https://lkml.kernel.org/r/878dbcb5f47bc9b11881c81f745c0bef5c23f97f.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23 10:31:05 -06:00
Peter Collingbourne
1d82b7898f arch: move SA_* definitions to generic headers
Most architectures with the exception of alpha, mips, parisc and
sparc use the same values for these flags. Move their definitions into
asm-generic/signal-defs.h and allow the architectures with non-standard
values to override them. Also, document the non-standard flag values
in order to make it easier to add new generic flags in the future.

A consequence of this change is that on powerpc and x86, the constants'
values aside from SA_RESETHAND change signedness from unsigned
to signed. This is not expected to impact realistic use of these
constants. In particular the typical use of the constants where they
are or'ed together and assigned to sa_flags (or another int variable)
would not be affected.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528
Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23 10:31:05 -06:00
Thomas Gleixner
7fd70c65fa ARM: irqstat: Get rid of duplicated declaration
irq_cpustat_t is exactly the same as the asm-generic one. Define
ack_bad_irq so the generic header does not emit the generic version of it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20201113141733.276505871@linutronix.de
2020-11-23 10:31:05 +01:00
Kees Cook
424c9102fa arm: Enable seccomp architecture tracking
To enable seccomp constant action bitmaps, we need to have a static
mapping to the audit architecture and system call table size. Add these
for arm.

Signed-off-by: Kees Cook <keescook@chromium.org>
2020-11-20 11:16:34 -08:00
Arnd Bergmann
cef3970381 arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.

I looked up the possible number of bits in source code and
datasheets, here is what I found:

 - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
 - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
   support more than 32 bits, even though supersections in theory allow
   up to 40 bits as well.
 - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
   XPA supports up to 60 bits in theory, but 40 bits are more than
   anyone will ever ship
 - On PowerPC, there are three different implementations of 36 bit
   addressing, but 32-bit is used without CONFIG_PTE_64BIT
 - On RISC-V, the normal page table format can support 34 bit
   addressing. There is no highmem support on RISC-V, so anything
   above 2GB is unused, but it might be useful to eventually support
   CONFIG_ZRAM for high pages.

Fixes: 61989a80fb ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a9 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16 16:57:18 +01:00
Jens Axboe
32d59773da arm: add support for TIF_NOTIFY_SIGNAL
Wire up TIF_NOTIFY_SIGNAL handling for arm.

Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-12 08:45:51 -07:00
Thomas Gleixner
2a15ba82fa ARM: highmem: Switch to generic kmap atomic
No reason having the same code in every architecture.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201103095857.582196476@linutronix.de
2020-11-06 23:14:56 +01:00
Arnd Bergmann
6239da2972 ARM: rpc: use legacy_timer_tick
rpc is the only user of the timer_tick() function now, and can
just call the newly added generic version instead.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30 21:57:05 +01:00
Ard Biesheuvel
450abd38fe ARM: kernel: use relative references for UP/SMP alternatives
Currently, the .alt.smp.init section contains the virtual addresses
of the patch sites. Since patching may occur both before and after
switching into virtual mode, this requires some manual handling of
the address when applying the UP alternative.

Let's simplify this by using relative offsets in the table entries:
this allows us to simply add each entry's address to its contents,
regardless of whether we are running in virtual mode or not.

Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-28 17:05:39 +01:00
Ard Biesheuvel
9443076e43 ARM: p2v: reduce p2v alignment requirement to 2 MiB
The ARM kernel's linear map starts at PAGE_OFFSET, which maps to a
physical address (PHYS_OFFSET) that is platform specific, and is
discovered at boot. Since we don't want to slow down translations
between physical and virtual addresses by keeping the offset in a
variable in memory, we implement this by patching the code performing
the translation, and putting the offset between PAGE_OFFSET and the
start of physical RAM directly into the instruction opcodes.

As we only patch up to 8 bits of offset, yielding 4 GiB >> 8 == 16 MiB
of granularity, we have to round up PHYS_OFFSET to the next multiple if
the start of physical RAM is not a multiple of 16 MiB. This wastes some
physical RAM, since the memory that was skipped will now live below
PAGE_OFFSET, making it inaccessible to the kernel.

We can improve this by changing the patchable sequences and the patching
logic to carry more bits of offset: 11 bits gives us 4 GiB >> 11 == 2 MiB
of granularity, and so we will never waste more than that amount by
rounding up the physical start of DRAM to the next multiple of 2 MiB.
(Note that 2 MiB granularity guarantees that the linear mapping can be
created efficiently, whereas less than 2 MiB may result in the linear
mapping needing another level of page tables)

This helps Zhen Lei's scenario, where the start of DRAM is known to be
occupied. It also helps EFI boot, which relies on the firmware's page
allocator to allocate space for the decompressed kernel as low as
possible. And if the KASLR patches ever land for 32-bit, it will give
us 3 more bits of randomization of the placement of the kernel inside
the linear region.

For the ARM code path, it simply comes down to using two add/sub
instructions instead of one for the carryless version, and patching
each of them with the correct immediate depending on the rotation
field. For the LPAE calculation, which has to deal with a carry, it
patches the MOVW instruction with up to 12 bits of offset (but we only
need 11 bits anyway)

For the Thumb2 code path, patching more than 11 bits of displacement
would be somewhat cumbersome, but the 11 bits we need fit nicely into
the second word of the u16[2] opcode, so we simply update the immediate
assignment and the left shift to create an addend of the right magnitude.

Suggested-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-28 16:59:43 +01:00
Ard Biesheuvel
e8e00f5afb ARM: p2v: switch to MOVW for Thumb2 and ARM/LPAE
In preparation for reducing the phys-to-virt minimum relative alignment
from 16 MiB to 2 MiB, switch to patchable sequences involving MOVW
instructions that can more easily be manipulated to carry a 12-bit
immediate. Note that the non-LPAE ARM sequence is not updated: MOVW
may not be supported on non-LPAE platforms, and the sequence itself
can be updated more easily to apply the 12 bits of displacement.

For Thumb2, which has many more versions of opcodes, switch to a sequence
that can be patched by the same patching code for both versions. Note
that the Thumb2 opcodes for MOVW and MVN are unambiguous, and have no
rotation bits in their immediate fields, so there is no need to use
placeholder constants in the asm blocks.

While at it, drop the 'volatile' qualifiers from the asm blocks: the
code does not have any side effects that are invisible to the compiler,
so it is free to omit these sequences if the outputs are not used.

Suggested-by: Russell King <linux@armlinux.org.uk>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-28 16:59:43 +01:00
Ard Biesheuvel
2730e8eaa4 ARM: p2v: use relative references in patch site arrays
Free up a register in the p2v patching code by switching to relative
references, which don't require keeping the phys-to-virt displacement
live in a register.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-28 16:59:43 +01:00
Ard Biesheuvel
0869f3b9da ARM: p2v: drop redundant 'type' argument from __pv_stub
We always pass the same value for 'type' so pull it into the __pv_stub
macro itself.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-28 16:59:43 +01:00
Ard Biesheuvel
22f2d23098 ARM: module: add support for place relative relocations
When using the new adr_l/ldr_l/str_l macros to refer to external symbols
from modules, the linker may emit place relative ELF relocations that
need to be fixed up by the module loader. So add support for these.

Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-28 16:59:43 +01:00
Ard Biesheuvel
0b1674638a ARM: assembler: introduce adr_l, ldr_l and str_l macros
Like arm64, ARM supports position independent code sequences that
produce symbol references with a greater reach than the ordinary
adr/ldr instructions. Since on ARM, the adrl pseudo-instruction is
only supported in ARM mode (and not at all when using Clang), having
a adr_l macro like we do on arm64 is useful, and increases symmetry
as well.

Currently, we use open coded instruction sequences involving literals
and arithmetic operations. Instead, we can use movw/movt pairs on v7
CPUs, circumventing the D-cache entirely.

E.g., on v7+ CPUs, we can emit a PC-relative reference as follows:

       movw         <reg>, #:lower16:<sym> - (1f + 8)
       movt         <reg>, #:upper16:<sym> - (1f + 8)
  1:   add          <reg>, <reg>, pc

For older CPUs, we can emit the literal into a subsection, allowing it
to be emitted out of line while retaining the ability to perform
arithmetic on label offsets.

E.g., on pre-v7 CPUs, we can emit a PC-relative reference as follows:

       ldr          <reg>, 2f
  1:   add          <reg>, <reg>, pc
       .subsection  1
  2:   .long        <sym> - (1b + 8)
       .previous

This is allowed by the assembler because, unlike ordinary sections,
subsections are combined into a single section in the object file, and
so the label references are not true cross-section references that are
visible as relocations. (Subsections have been available in binutils
since 2004 at least, so they should not cause any issues with older
toolchains.)

So use the above to implement the macros mov_l, adr_l, ldr_l and str_l,
all of which will use movw/movt pairs on v7 and later CPUs, and use
PC-relative literals otherwise.

Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-28 16:59:43 +01:00
Ard Biesheuvel
fc2933c133 ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address
Commit

  149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region")

created a permanent, read-only section mapping of the device tree blob
provided by the firmware, and added a set of macros to get the base and
size of the virtually mapped FDT based on the physical address. However,
while the mapping code uses the SECTION_SIZE macro correctly, the macros
use PMD_SIZE instead, which means something entirely different on ARM when
using short descriptors, and is therefore not the right quantity to use
here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names
of the macro and its parameter to clarify that it returns the virtual
address of the start of the FDT, based on the physical address in memory.

Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-28 14:59:30 +00:00
Andrew Jeffery
9fa2e7af3d ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe template
Setting both CONFIG_KPROBES=y and CONFIG_FORTIFY_SOURCE=y on ARM leads
to a panic in memcpy() when injecting a kprobe despite the fixes found
in commit e46daee53b ("ARM: 8806/1: kprobes: Fix false positive with
FORTIFY_SOURCE") and commit 0ac569bf6a ("ARM: 8834/1: Fix: kprobes:
optimized kprobes illegal instruction").

arch/arm/include/asm/kprobes.h effectively declares
the target type of the optprobe_template_entry assembly label as a u32
which leads memcpy()'s __builtin_object_size() call to determine that
the pointed-to object is of size four. However, the symbol is used as a handle
for the optimised probe assembly template that is at least 96 bytes in size.
The symbol's use despite its type blows up the memcpy() in ARM's
arch_prepare_optimized_kprobe() with a false-positive fortify_panic() when it
should instead copy the optimised probe template into place:

```
$ sudo perf probe -a aspeed_g6_pinctrl_probe
[  158.457252] detected buffer overflow in memcpy
[  158.458069] ------------[ cut here ]------------
[  158.458283] kernel BUG at lib/string.c:1153!
[  158.458436] Internal error: Oops - BUG: 0 [#1] SMP ARM
[  158.458768] Modules linked in:
[  158.459043] CPU: 1 PID: 99 Comm: perf Not tainted 5.9.0-rc7-00038-gc53ebf8167e9 #158
[  158.459296] Hardware name: Generic DT based system
[  158.459529] PC is at fortify_panic+0x18/0x20
[  158.459658] LR is at __irq_work_queue_local+0x3c/0x74
[  158.459831] pc : [<8047451c>]    lr : [<8020ecd4>]    psr: 60000013
[  158.460032] sp : be2d1d50  ip : be2d1c58  fp : be2d1d5c
[  158.460174] r10: 00000006  r9 : 00000000  r8 : 00000060
[  158.460348] r7 : 8011e434  r6 : b9e0b800  r5 : 7f000000  r4 : b9fe4f0c
[  158.460557] r3 : 80c04cc8  r2 : 00000000  r1 : be7c03cc  r0 : 00000022
[  158.460801] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  158.461037] Control: 10c5387d  Table: b9cd806a  DAC: 00000051
[  158.461251] Process perf (pid: 99, stack limit = 0x81c71a69)
[  158.461472] Stack: (0xbe2d1d50 to 0xbe2d2000)
[  158.461757] 1d40:                                     be2d1d84 be2d1d60 8011e724 80474510
[  158.462104] 1d60: b9e0b800 b9fe4f0c 00000000 b9fe4f14 80c8ec80 be235000 be2d1d9c be2d1d88
[  158.462436] 1d80: 801cee44 8011e57c b9fe4f0c 00000000 be2d1dc4 be2d1da0 801d0ad0 801cedec
[  158.462742] 1da0: 00000000 00000000 b9fe4f00 ffffffea 00000000 be235000 be2d1de4 be2d1dc8
[  158.463087] 1dc0: 80204604 801d0738 00000000 00000000 b9fe4004 ffffffea be2d1e94 be2d1de8
[  158.463428] 1de0: 80205434 80204570 00385c00 00000000 00000000 00000000 be2d1e14 be2d1e08
[  158.463880] 1e00: 802ba014 b9fe4f00 b9e718c0 b9fe4f84 b9e71ec8 be2d1e24 00000000 00385c00
[  158.464365] 1e20: 00000000 626f7270 00000065 802b905c be2d1e94 0000002e 00000000 802b9914
[  158.464829] 1e40: be2d1e84 be2d1e50 802b9914 8028ff78 804629d0 b9e71ec0 0000002e b9e71ec0
[  158.465141] 1e60: be2d1ea8 80c04cc8 00000cc0 b9e713c4 00000002 80205834 80205834 0000002e
[  158.465488] 1e80: be235000 be235000 be2d1ea4 be2d1e98 80205854 80204e94 be2d1ecc be2d1ea8
[  158.465806] 1ea0: 801ee4a0 80205840 00000002 80c04cc8 00000000 0000002e 0000002e 00000000
[  158.466110] 1ec0: be2d1f0c be2d1ed0 801ee5c8 801ee428 00000000 be2d0000 006b1fd0 00000051
[  158.466398] 1ee0: 00000000 b9eedf00 0000002e 80204410 006b1fd0 be2d1f60 00000000 00000004
[  158.466763] 1f00: be2d1f24 be2d1f10 8020442c 801ee4c4 80205834 802c613c be2d1f5c be2d1f28
[  158.467102] 1f20: 802c60ac 8020441c be2d1fac be2d1f38 8010c764 802e9888 be2d1f5c b9eedf00
[  158.467447] 1f40: b9eedf00 006b1fd0 0000002e 00000000 be2d1f94 be2d1f60 802c634c 802c5fec
[  158.467812] 1f60: 00000000 00000000 00000000 80c04cc8 006b1fd0 00000003 76f7a610 00000004
[  158.468155] 1f80: 80100284 be2d0000 be2d1fa4 be2d1f98 802c63ec 802c62e8 00000000 be2d1fa8
[  158.468508] 1fa0: 80100080 802c63e0 006b1fd0 00000003 00000003 006b1fd0 0000002e 00000000
[  158.468858] 1fc0: 006b1fd0 00000003 76f7a610 00000004 006b1fb0 0026d348 00000017 7ef2738c
[  158.469202] 1fe0: 76f3431c 7ef272d8 0014ec50 76f34338 60000010 00000003 00000000 00000000
[  158.469461] Backtrace:
[  158.469683] [<80474504>] (fortify_panic) from [<8011e724>] (arch_prepare_optimized_kprobe+0x1b4/0x1f8)
[  158.470021] [<8011e570>] (arch_prepare_optimized_kprobe) from [<801cee44>] (alloc_aggr_kprobe+0x64/0x70)
[  158.470287]  r9:be235000 r8:80c8ec80 r7:b9fe4f14 r6:00000000 r5:b9fe4f0c r4:b9e0b800
[  158.470478] [<801cede0>] (alloc_aggr_kprobe) from [<801d0ad0>] (register_kprobe+0x3a4/0x5a0)
[  158.470685]  r5:00000000 r4:b9fe4f0c
[  158.470790] [<801d072c>] (register_kprobe) from [<80204604>] (__register_trace_kprobe+0xa0/0xa4)
[  158.471001]  r9:be235000 r8:00000000 r7:ffffffea r6:b9fe4f00 r5:00000000 r4:00000000
[  158.471188] [<80204564>] (__register_trace_kprobe) from [<80205434>] (trace_kprobe_create+0x5ac/0x9ac)
[  158.471408]  r7:ffffffea r6:b9fe4004 r5:00000000 r4:00000000
[  158.471553] [<80204e88>] (trace_kprobe_create) from [<80205854>] (create_or_delete_trace_kprobe+0x20/0x3c)
[  158.471766]  r10:be235000 r9:be235000 r8:0000002e r7:80205834 r6:80205834 r5:00000002
[  158.471949]  r4:b9e713c4
[  158.472027] [<80205834>] (create_or_delete_trace_kprobe) from [<801ee4a0>] (trace_run_command+0x84/0x9c)
[  158.472255] [<801ee41c>] (trace_run_command) from [<801ee5c8>] (trace_parse_run_command+0x110/0x1f8)
[  158.472471]  r6:00000000 r5:0000002e r4:0000002e
[  158.472594] [<801ee4b8>] (trace_parse_run_command) from [<8020442c>] (probes_write+0x1c/0x28)
[  158.472800]  r10:00000004 r9:00000000 r8:be2d1f60 r7:006b1fd0 r6:80204410 r5:0000002e
[  158.472968]  r4:b9eedf00
[  158.473046] [<80204410>] (probes_write) from [<802c60ac>] (vfs_write+0xcc/0x1e8)
[  158.473226] [<802c5fe0>] (vfs_write) from [<802c634c>] (ksys_write+0x70/0xf8)
[  158.473400]  r8:00000000 r7:0000002e r6:006b1fd0 r5:b9eedf00 r4:b9eedf00
[  158.473567] [<802c62dc>] (ksys_write) from [<802c63ec>] (sys_write+0x18/0x1c)
[  158.473745]  r9:be2d0000 r8:80100284 r7:00000004 r6:76f7a610 r5:00000003 r4:006b1fd0
[  158.473932] [<802c63d4>] (sys_write) from [<80100080>] (ret_fast_syscall+0x0/0x54)
[  158.474126] Exception stack(0xbe2d1fa8 to 0xbe2d1ff0)
[  158.474305] 1fa0:                   006b1fd0 00000003 00000003 006b1fd0 0000002e 00000000
[  158.474573] 1fc0: 006b1fd0 00000003 76f7a610 00000004 006b1fb0 0026d348 00000017 7ef2738c
[  158.474811] 1fe0: 76f3431c 7ef272d8 0014ec50 76f34338
[  158.475171] Code: e24cb004 e1a01000 e59f0004 ebf40dd3 (e7f001f2)
[  158.475847] ---[ end trace 55a5b31c08a29f00 ]---
[  158.476088] Kernel panic - not syncing: Fatal exception
[  158.476375] CPU0: stopping
[  158.476709] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D           5.9.0-rc7-00038-gc53ebf8167e9 #158
[  158.477176] Hardware name: Generic DT based system
[  158.477411] Backtrace:
[  158.477604] [<8010dd28>] (dump_backtrace) from [<8010dfd4>] (show_stack+0x20/0x24)
[  158.477990]  r7:00000000 r6:60000193 r5:00000000 r4:80c2f634
[  158.478323] [<8010dfb4>] (show_stack) from [<8046390c>] (dump_stack+0xcc/0xe8)
[  158.478686] [<80463840>] (dump_stack) from [<80110750>] (handle_IPI+0x334/0x3a0)
[  158.479063]  r7:00000000 r6:00000004 r5:80b65cc8 r4:80c78278
[  158.479352] [<8011041c>] (handle_IPI) from [<801013f8>] (gic_handle_irq+0x88/0x94)
[  158.479757]  r10:10c5387d r9:80c01ed8 r8:00000000 r7:c0802000 r6:80c0537c r5:000003ff
[  158.480146]  r4:c080200c r3:fffffff4
[  158.480364] [<80101370>] (gic_handle_irq) from [<80100b6c>] (__irq_svc+0x6c/0x90)
[  158.480748] Exception stack(0x80c01ed8 to 0x80c01f20)
[  158.481031] 1ec0:                                                       000128bc 00000000
[  158.481499] 1ee0: be7b8174 8011d3a0 80c00000 00000000 80c04cec 80c04d28 80c5d7c2 80a026d4
[  158.482091] 1f00: 10c5387d 80c01f34 80c01f38 80c01f28 80109554 80109558 60000013 ffffffff
[  158.482621]  r9:80c00000 r8:80c5d7c2 r7:80c01f0c r6:ffffffff r5:60000013 r4:80109558
[  158.482983] [<80109518>] (arch_cpu_idle) from [<80818780>] (default_idle_call+0x38/0x120)
[  158.483360] [<80818748>] (default_idle_call) from [<801585a8>] (do_idle+0xd4/0x158)
[  158.483945]  r5:00000000 r4:80c00000
[  158.484237] [<801584d4>] (do_idle) from [<801588f4>] (cpu_startup_entry+0x28/0x2c)
[  158.484784]  r9:80c78000 r8:00000000 r7:80c78000 r6:80c78040 r5:80c04cc0 r4:000000d6
[  158.485328] [<801588cc>] (cpu_startup_entry) from [<80810a78>] (rest_init+0x9c/0xbc)
[  158.485930] [<808109dc>] (rest_init) from [<80b00ae4>] (arch_call_rest_init+0x18/0x1c)
[  158.486503]  r5:80c04cc0 r4:00000001
[  158.486857] [<80b00acc>] (arch_call_rest_init) from [<80b00fcc>] (start_kernel+0x46c/0x548)
[  158.487589] [<80b00b60>] (start_kernel) from [<00000000>] (0x0)
```

Fixes: e46daee53b ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE")
Fixes: 0ac569bf6a ("ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction")
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Luka Oreskovic <luka.oreskovic@sartura.hr>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Luka Oreskovic <luka.oreskovic@sartura.hr>
Cc: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27 12:11:51 +00:00
Linus Walleij
5615f69bc2 ARM: 9016/2: Initialize the mapping of KASan shadow memory
This patch initializes KASan shadow region's page table and memory.
There are two stage for KASan initializing:

1. At early boot stage the whole shadow region is mapped to just
   one physical page (kasan_zero_page). It is finished by the function
   kasan_early_init which is called by __mmap_switched(arch/arm/kernel/
   head-common.S)

2. After the calling of paging_init, we use kasan_zero_page as zero
   shadow for some memory that KASan does not need to track, and we
   allocate a new shadow space for the other memory that KASan need to
   track. These issues are finished by the function kasan_init which is
   call by setup_arch.

When using KASan we also need to increase the THREAD_SIZE_ORDER
from 1 to 2 as the extra calls for shadow memory uses quite a bit
of stack.

As we need to make a temporary copy of the PGD when setting up
shadow memory we create a helpful PGD_SIZE definition for both
LPAE and non-LPAE setups.

The KASan core code unconditionally calls pud_populate() so this
needs to be changed from BUG() to do {} while (0) when building
with KASan enabled.

After the initial development by Andre Ryabinin several modifications
have been made to this code:

Abbott Liu <liuwenliang@huawei.com>
- Add support ARM LPAE: If LPAE is enabled, KASan shadow region's
  mapping table need be copied in the pgd_alloc() function.
- Change kasan_pte_populate,kasan_pmd_populate,kasan_pud_populate,
  kasan_pgd_populate from .meminit.text section to .init.text section.
  Reported by Florian Fainelli <f.fainelli@gmail.com>

Linus Walleij <linus.walleij@linaro.org>:
- Drop the custom mainpulation of TTBR0 and just use
  cpu_switch_mm() to switch the pgd table.
- Adopt to handle 4th level page tabel folding.
- Rewrite the entire page directory and page entry initialization
  sequence to be recursive based on ARM64:s kasan_init.c.

Ard Biesheuvel <ardb@kernel.org>:
- Necessary underlying fixes.
- Crucial bug fixes to the memory set-up code.

Co-developed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Co-developed-by: Abbott Liu <liuwenliang@huawei.com>
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>

Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27 12:11:10 +00:00
Linus Walleij
c12366ba44 ARM: 9015/2: Define the virtual space of KASan's shadow region
Define KASAN_SHADOW_OFFSET,KASAN_SHADOW_START and KASAN_SHADOW_END for
the Arm kernel address sanitizer. We are "stealing" lowmem (the 4GB
addressable by a 32bit architecture) out of the virtual address
space to use as shadow memory for KASan as follows:

 +----+ 0xffffffff
 |    |
 |    | |-> Static kernel image (vmlinux) BSS and page table
 |    |/
 +----+ PAGE_OFFSET
 |    |
 |    | |->  Loadable kernel modules virtual address space area
 |    |/
 +----+ MODULES_VADDR = KASAN_SHADOW_END
 |    |
 |    | |-> The shadow area of kernel virtual address.
 |    |/
 +----+->  TASK_SIZE (start of kernel space) = KASAN_SHADOW_START the
 |    |   shadow address of MODULES_VADDR
 |    | |
 |    | |
 |    | |-> The user space area in lowmem. The kernel address
 |    | |   sanitizer do not use this space, nor does it map it.
 |    | |
 |    | |
 |    | |
 |    | |
 |    |/
 ------ 0

0 .. TASK_SIZE is the memory that can be used by shared
userspace/kernelspace. It us used for userspace processes and for
passing parameters and memory buffers in system calls etc. We do not
need to shadow this area.

KASAN_SHADOW_START:
 This value begins with the MODULE_VADDR's shadow address. It is the
 start of kernel virtual space. Since we have modules to load, we need
 to cover also that area with shadow memory so we can find memory
 bugs in modules.

KASAN_SHADOW_END
 This value is the 0x100000000's shadow address: the mapping that would
 be after the end of the kernel memory at 0xffffffff. It is the end of
 kernel address sanitizer shadow area. It is also the start of the
 module area.

KASAN_SHADOW_OFFSET:
 This value is used to map an address to the corresponding shadow
 address by the following formula:

   shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;

 As you would expect, >> 3 is equal to dividing by 8, meaning each
 byte in the shadow memory covers 8 bytes of kernel memory, so one
 bit shadow memory per byte of kernel memory is used.

 The KASAN_SHADOW_OFFSET is provided in a Kconfig option depending
 on the VMSPLIT layout of the system: the kernel and userspace can
 split up lowmem in different ways according to needs, so we calculate
 the shadow offset depending on this.

When kasan is enabled, the definition of TASK_SIZE is not an 8-bit
rotated constant, so we need to modify the TASK_SIZE access code in the
*.s file.

The kernel and modules may use different amounts of memory,
according to the VMSPLIT configuration, which in turn
determines the PAGE_OFFSET.

We use the following KASAN_SHADOW_OFFSETs depending on how the
virtual memory is split up:

- 0x1f000000 if we have 1G userspace / 3G kernelspace split:
  - The kernel address space is 3G (0xc0000000)
  - PAGE_OFFSET is then set to 0x40000000 so the kernel static
    image (vmlinux) uses addresses 0x40000000 .. 0xffffffff
  - On top of that we have the MODULES_VADDR which under
    the worst case (using ARM instructions) is
    PAGE_OFFSET - 16M (0x01000000) = 0x3f000000
    so the modules use addresses 0x3f000000 .. 0x3fffffff
  - So the addresses 0x3f000000 .. 0xffffffff need to be
    covered with shadow memory. That is 0xc1000000 bytes
    of memory.
  - 1/8 of that is needed for its shadow memory, so
    0x18200000 bytes of shadow memory is needed. We
    "steal" that from the remaining lowmem.
  - The KASAN_SHADOW_START becomes 0x26e00000, to
    KASAN_SHADOW_END at 0x3effffff.
  - Now we can calculate the KASAN_SHADOW_OFFSET for any
    kernel address as 0x3f000000 needs to map to the first
    byte of shadow memory and 0xffffffff needs to map to
    the last byte of shadow memory. Since:
    SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
    0x26e00000 = (0x3f000000 >> 3) + KASAN_SHADOW_OFFSET
    KASAN_SHADOW_OFFSET = 0x26e00000 - (0x3f000000 >> 3)
    KASAN_SHADOW_OFFSET = 0x26e00000 - 0x07e00000
    KASAN_SHADOW_OFFSET = 0x1f000000

- 0x5f000000 if we have 2G userspace / 2G kernelspace split:
  - The kernel space is 2G (0x80000000)
  - PAGE_OFFSET is set to 0x80000000 so the kernel static
    image uses 0x80000000 .. 0xffffffff.
  - On top of that we have the MODULES_VADDR which under
    the worst case (using ARM instructions) is
    PAGE_OFFSET - 16M (0x01000000) = 0x7f000000
    so the modules use addresses 0x7f000000 .. 0x7fffffff
  - So the addresses 0x7f000000 .. 0xffffffff need to be
    covered with shadow memory. That is 0x81000000 bytes
    of memory.
  - 1/8 of that is needed for its shadow memory, so
    0x10200000 bytes of shadow memory is needed. We
    "steal" that from the remaining lowmem.
  - The KASAN_SHADOW_START becomes 0x6ee00000, to
    KASAN_SHADOW_END at 0x7effffff.
  - Now we can calculate the KASAN_SHADOW_OFFSET for any
    kernel address as 0x7f000000 needs to map to the first
    byte of shadow memory and 0xffffffff needs to map to
    the last byte of shadow memory. Since:
    SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
    0x6ee00000 = (0x7f000000 >> 3) + KASAN_SHADOW_OFFSET
    KASAN_SHADOW_OFFSET = 0x6ee00000 - (0x7f000000 >> 3)
    KASAN_SHADOW_OFFSET = 0x6ee00000 - 0x0fe00000
    KASAN_SHADOW_OFFSET = 0x5f000000

- 0x9f000000 if we have 3G userspace / 1G kernelspace split,
  and this is the default split for ARM:
  - The kernel address space is 1GB (0x40000000)
  - PAGE_OFFSET is set to 0xc0000000 so the kernel static
    image uses 0xc0000000 .. 0xffffffff.
  - On top of that we have the MODULES_VADDR which under
    the worst case (using ARM instructions) is
    PAGE_OFFSET - 16M (0x01000000) = 0xbf000000
    so the modules use addresses 0xbf000000 .. 0xbfffffff
  - So the addresses 0xbf000000 .. 0xffffffff need to be
    covered with shadow memory. That is 0x41000000 bytes
    of memory.
  - 1/8 of that is needed for its shadow memory, so
    0x08200000 bytes of shadow memory is needed. We
    "steal" that from the remaining lowmem.
  - The KASAN_SHADOW_START becomes 0xb6e00000, to
    KASAN_SHADOW_END at 0xbfffffff.
  - Now we can calculate the KASAN_SHADOW_OFFSET for any
    kernel address as 0xbf000000 needs to map to the first
    byte of shadow memory and 0xffffffff needs to map to
    the last byte of shadow memory. Since:
    SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
    0xb6e00000 = (0xbf000000 >> 3) + KASAN_SHADOW_OFFSET
    KASAN_SHADOW_OFFSET = 0xb6e00000 - (0xbf000000 >> 3)
    KASAN_SHADOW_OFFSET = 0xb6e00000 - 0x17e00000
    KASAN_SHADOW_OFFSET = 0x9f000000

- 0x8f000000 if we have 3G userspace / 1G kernelspace with
  full 1 GB low memory (VMSPLIT_3G_OPT):
  - The kernel address space is 1GB (0x40000000)
  - PAGE_OFFSET is set to 0xb0000000 so the kernel static
    image uses 0xb0000000 .. 0xffffffff.
  - On top of that we have the MODULES_VADDR which under
    the worst case (using ARM instructions) is
    PAGE_OFFSET - 16M (0x01000000) = 0xaf000000
    so the modules use addresses 0xaf000000 .. 0xaffffff
  - So the addresses 0xaf000000 .. 0xffffffff need to be
    covered with shadow memory. That is 0x51000000 bytes
    of memory.
  - 1/8 of that is needed for its shadow memory, so
    0x0a200000 bytes of shadow memory is needed. We
    "steal" that from the remaining lowmem.
  - The KASAN_SHADOW_START becomes 0xa4e00000, to
    KASAN_SHADOW_END at 0xaeffffff.
  - Now we can calculate the KASAN_SHADOW_OFFSET for any
    kernel address as 0xaf000000 needs to map to the first
    byte of shadow memory and 0xffffffff needs to map to
    the last byte of shadow memory. Since:
    SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
    0xa4e00000 = (0xaf000000 >> 3) + KASAN_SHADOW_OFFSET
    KASAN_SHADOW_OFFSET = 0xa4e00000 - (0xaf000000 >> 3)
    KASAN_SHADOW_OFFSET = 0xa4e00000 - 0x15e00000
    KASAN_SHADOW_OFFSET = 0x8f000000

- The default value of 0xffffffff for KASAN_SHADOW_OFFSET
  is an error value. We should always match one of the
  above shadow offsets.

When we do this, TASK_SIZE will sometimes get a bit odd values
that will not fit into immediate mov assembly instructions.
To account for this, we need to rewrite some assembly using
TASK_SIZE like this:

-       mov     r1, #TASK_SIZE
+       ldr     r1, =TASK_SIZE

or

-       cmp     r4, #TASK_SIZE
+       ldr     r0, =TASK_SIZE
+       cmp     r4, r0

this is done to avoid the immediate #TASK_SIZE that need to
fit into a limited number of bits.

Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27 12:11:08 +00:00
Linus Walleij
d6d51a96c7 ARM: 9014/2: Replace string mem* functions for KASan
Functions like memset()/memmove()/memcpy() do a lot of memory
accesses.

If a bad pointer is passed to one of these functions it is important
to catch this. Compiler instrumentation cannot do this since these
functions are written in assembly.

KASan replaces these memory functions with instrumented variants.

The original functions are declared as weak symbols so that
the strong definitions in mm/kasan/kasan.c can replace them.

The original functions have aliases with a '__' prefix in their
name, so we can call the non-instrumented variant if needed.

We must use __memcpy()/__memset() in place of memcpy()/memset()
when we copy .data to RAM and when we clear .bss, because
kasan_early_init cannot be called before the initialization of
.data and .bss.

For the kernel compression and EFI libstub's custom string
libraries we need a special quirk: even if these are built
without KASan enabled, they rely on the global headers for their
custom string libraries, which means that e.g. memcpy()
will be defined to __memcpy() and we get link failures.
Since these implementations are written i C rather than
assembly we use e.g. __alias(memcpy) to redirected any
users back to the local implementation.

Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27 12:11:06 +00:00
Ard Biesheuvel
7a1be318f5 ARM: 9012/1: move device tree mapping out of linear region
On ARM, setting up the linear region is tricky, given the constraints
around placement and alignment of the memblocks, and how the kernel
itself as well as the DT are placed in physical memory.

Let's simplify matters a bit, by moving the device tree mapping to the
top of the address space, right between the end of the vmalloc region
and the start of the the fixmap region, and create a read-only mapping
for it that is independent of the size of the linear region, and how it
is organized.

Since this region was formerly used as a guard region, which will now be
populated fully on LPAE builds by this read-only mapping (which will
still be able to function as a guard region for stray writes), bump the
start of the [underutilized] fixmap region by 512 KB as well, to ensure
that there is always a proper guard region here. Doing so still leaves
ample room for the fixmap space, even with NR_CPUS set to its maximum
value of 32.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27 12:11:01 +00:00
Ard Biesheuvel
e9a2f8b599 ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS address
Before moving the DT mapping out of the linear region, let's prepare
for this change by removing all the phys-to-virt translations of the
__atags_pointer variable, and perform this translation only once at
setup time.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27 12:10:59 +00:00
Nicholas Piggin
292f70d7cd arm: use asm-generic/mmu_context.h for no-op implementations
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26 16:45:06 +01:00
Al Viro
1510723087 arm: kill dump_task_regs()
the last user had been fdpic

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-25 20:03:02 -04:00
Joe Perches
33def8498f treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25 14:51:49 -07:00
Linus Torvalds
e731f3146f ARM: SoC platform updates
SoC changes, a substantial part of this is cleanup of some of the older
 platforms that used to have a bunch of board files. In particular:
 
  - Removal of non-DT i.MX platforms that haven't seen activity in years,
    it's time to remove them.
  - A bunch of cleanup and removal of platform data for TI/OMAP platforms,
    moving over to genpd for power/reset control (yay!)
  - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
    closer to multiplatform support (not quite there yet, but getting
    close).
 
 THere are a few other changes too, smaller fixlets, etc. For new
 platform support, the primary ones re:
 
  - New SoC: Hisilicon SD5203, ARM926EJ-S platform.
  - Cpufreq support for i.MX7ULP
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TT4gPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx322MP/1mI56SyOFx30AqtWBPSjHJp+DzhOObyb4vD
 ndYuicBIn9tJwvVRBBZkfsbIU8EENVwrN3hOpesaj9L7xiqOqKakcnyC1REYmpIs
 8XBDfdZzy5PrMHIu3fF1ZDCQyO7KndGf5DfLVxJtcf1tSPQyQCuIA3FtS6d8Bxnz
 r491+om67ucnlFD5X0Spm3RdZH+ECmXx2iXwoS0Zi7P+X+S+ovG8wBV/X0ggeoBc
 Zgi4W01SiRupmSVZ6PA7FvWaLGQErQAALQOcFtMcFgjeWzc1v2QzcURELH8JW7ro
 72AH9st1Kvi3hoN2HNNzUnNUdQvZ+AdH8skMIpN/e1cBYqYStAF3gm/R9h+iVHbG
 GMmgzXHAFErfAW2UcF8tq1CzvQ5ChcTLNXdeoa8CeQbcDfocF3EyuKSPuDH+ve0H
 kk4tPesTAc6XCEVwLaGnoC75sdum5mSi8h9vqhln2KCdeTY7jxzH9YGHjm71Supb
 kV9vqo5Q5U/c5l2nU4r5q/DZdIahKsk3HIQZ0iG7BifAzamaTh4uyLVjtM6HSwNz
 tdHZaxoHd/PLI5IoeggFelx6qgvK5qVRLP0evgOdTLRFLj/ZbrOf0Q7DjdTy2BjZ
 Lgq461QqNapOzxq43G2IDT2+P62Q1+d+YLCKBgaGQaJicyU5m9STCNo3UBb1qH1h
 W6UwGF5z
 =0+Ee
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...
2020-10-24 10:33:08 -07:00
Linus Torvalds
746b25b1aa Kbuild updates for v5.10
- Support 'make compile_commands.json' to generate the compilation
    database more easily, avoiding stale entries
 
  - Support 'make clang-analyzer' and 'make clang-tidy' for static checks
    using clang-tidy
 
  - Preprocess scripts/modules.lds.S to allow CONFIG options in the module
    linker script
 
  - Drop cc-option tests from compiler flags supported by our minimal
    GCC/Clang versions
 
  - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
 
  - Use sha1 build id for both BFD linker and LLD
 
  - Improve deb-pkg for reproducible builds and rootless builds
 
  - Remove stale, useless scripts/namespace.pl
 
  - Turn -Wreturn-type warning into error
 
  - Fix build error of deb-pkg when CONFIG_MODULES=n
 
  - Replace 'hostname' command with more portable 'uname -n'
 
  - Various Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl+RfS0VHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGG1QP/2hzoMzK1YXErPUhGrhYU1rxz7Nu
 HkLTIkyKF1HPwSJf5XyNW/FTBI4SDlkNoVg/weEDCS1yFxxpvQLIck8ChzA1kIIM
 P+1IfBWOTzqn91XsapU2zwSno3gylphVchVIvYAB3oLUotGeMSluy1cQtBRzyA5D
 rj2Q7H8fzkzk3YoBcBC/BOKDlfo/usqQ1X/gsfRFwN/BJxeZSYoujNBE7KtHaDsd
 8K/ggBIqmST4NBn+M8c11d8CxzvWbtG1gq3EkUL5nG8T13DsGn1EFC0SPt85bkvv
 f9YywfJi37HixhZzK6tXYjN/PWoiEY6z90mhd0NtZghQT7kQMiTQ3sWrM8dX3ssf
 phBzO94uFQDjhyxOaSSsCoI/TIciAPo4+G8PNjcaEtj63IEfhEz/dnlstYwY5Y9P
 Pp3aZtVjSGJwGW2u2EUYj6paFVqjf6DXQjQKPNHnsYCEidIvFTjjguRGvx9gl6mx
 yd8oseOsAtOEf0alRe9MMdvN17O3UrRAxgBdap7fktg02TLVRGxZIbuwKmBf29ho
 ORl9zeFkYBn6XQFyuItJoXy/kYFyHDaBEPYCRQcY4dwqcjZIiAc/FhYbqYthJ59L
 5vLN2etmDIVSuUv1J5nBqHHGCqJChykbqg7riQ651dCNKw4gZB8ctCay2lXhBXMg
 1mqOcoG5WWL7//F+
 =tZRN
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Support 'make compile_commands.json' to generate the compilation
   database more easily, avoiding stale entries

 - Support 'make clang-analyzer' and 'make clang-tidy' for static checks
   using clang-tidy

 - Preprocess scripts/modules.lds.S to allow CONFIG options in the
   module linker script

 - Drop cc-option tests from compiler flags supported by our minimal
   GCC/Clang versions

 - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y

 - Use sha1 build id for both BFD linker and LLD

 - Improve deb-pkg for reproducible builds and rootless builds

 - Remove stale, useless scripts/namespace.pl

 - Turn -Wreturn-type warning into error

 - Fix build error of deb-pkg when CONFIG_MODULES=n

 - Replace 'hostname' command with more portable 'uname -n'

 - Various Makefile cleanups

* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: Use uname for LINUX_COMPILE_HOST detection
  kbuild: Only add -fno-var-tracking-assignments for old GCC versions
  kbuild: remove leftover comment for filechk utility
  treewide: remove DISABLE_LTO
  kbuild: deb-pkg: clean up package name variables
  kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
  kbuild: enforce -Werror=return-type
  scripts: remove namespace.pl
  builddeb: Add support for all required debian/rules targets
  builddeb: Enable rootless builds
  builddeb: Pass -n to gzip for reproducible packages
  kbuild: split the build log of kallsyms
  kbuild: explicitly specify the build id style
  scripts/setlocalversion: make git describe output more reliable
  kbuild: remove cc-option test of -Werror=date-time
  kbuild: remove cc-option test of -fno-stack-check
  kbuild: remove cc-option test of -fno-strict-overflow
  kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
  kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
  kbuild: do not create built-in objects for external module builds
  ...
2020-10-22 13:13:57 -07:00
Linus Torvalds
00937f36b0 pci-v5.10-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl+QUFkUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vw6SQ/9FHiAlHIa48/l5ZweqAuN3XnU8hoO
 sqMoJE8eqTkIYIT0aQdW6b1sDB0YE6b4UVxzg+UL/E0qYeJqgIUakig7QkyyF1qU
 aT5hq2ic+lk88G7AAxK3kgQGPk+JvP1EFIyOu6HBWzzDDzgLme1Iuh/5ulc2/lo+
 E4biy0WOnI8vMfCieXGK4bSpc17Rn0+3N4cuVwZXBlntsvicE90VqeWBzqti1sk5
 R6gkZuW+EIUNHHL7TLlkCeYZq6QNbXWzhfKCiaGW2wW4eJ4Ek1/ncQjyTbCFytKU
 7OIYvrH20XO3L5GEfJ5fdbWErI1dRpoHO4NmhWljyBcVh44VYnM2ixhA7TuJ+TOk
 OtMbtoJAlP+QDlVdAW6rmRYmMPLFK/AQl5Aq7ftY22b2rYXqP20BobPy2MpDT71T
 sGC8z0ABl/ijo23g3I+3/2VzP/RzGhZJ0ZqagrXj8jHtg8SVy2fLcR5nr/dlrgFk
 TG83zML6ui1KViyx5nzElaEtw18aTqP61CNQxijQtNoYwKBTtRKNTrdRr4Qo7Hi6
 6S+No3+4z8Kf8d90y0LkJQqr7JRkG6nI3AhXHO3rxXpXJOD2+QzlpwBZTQnASqq7
 3kC1doUPmN97rFUYPQWWyOs6xSMcGbGIz8Uus3shH6yDtNxgpnIVoctH55hTEh6w
 nSY/4ssIfzJxZCE=
 =RCFo
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
     Liu)
   - Add schedule point in pci_read_config() to reduce max latency
     (Jiang Biao)
   - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)

  Resource management:
   - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
     Pieralisi)

  PCIe native device hotplug:
   - Reduce noisiness on hot removal (Lukas Wunner)

  Power management:
   - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
     that was done on the basis of spec typo (Bjorn Helgaas)
   - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
     ambiguity (Krzysztof Wilczyński)
   - Remove unused pcibios_pm_ops (Vaibhav Gupta)

  IOMMU:
   - Enable Translation Blocking for external devices to harden against
     DMA attacks (Rajat Jain)

  Error handling:
   - Add an ACPI APEI notifier chain for vendor CPER records to enable
     device-specific error handling (Shiju Jose)

  ASPM:
   - Remove struct aspm_register_info to simplify code (Saheed O.
     Bolarinwa)

  Amlogic Meson PCIe controller driver:
   - Build as module by default (Kevin Hilman)

  Ampere Altra PCIe controller driver:
   - Add MCFG quirk to work around non-standard ECAM implementation
     (Tuan Phan)

  Broadcom iProc PCIe controller driver:
   - Set affinity mask on MSI interrupts (Mark Tomlinson)

  Broadcom STB PCIe controller driver:
   - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
   - Add DT bindings for more Brcmstb chips (Jim Quinlan)
   - Add bcm7278 register info (Jim Quinlan)
   - Add bcm7278 PERST# support (Jim Quinlan)
   - Add suspend and resume pm_ops (Jim Quinlan)
   - Add control of rescal reset (Jim Quinlan)
   - Set additional internal memory DMA viewport sizes (Jim Quinlan)
   - Accommodate MSI for older chips (Jim Quinlan)
   - Set bus max burst size by chip type (Jim Quinlan)
   - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Use dev_err_probe() to reduce redundant messages (Anson Huang)

  Freescale Layerscape PCIe controller driver:
   - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
   - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint test support for lS1088a (Xiaowei Bao)
   - Add MSI-X support for ls1088a (Xiaowei Bao)

  HiSilicon HIP PCIe controller driver:
   - Handle HIP-specific errors via ACPI APEI (Yicong Yang)

  HiSilicon Kirin PCIe controller driver:
   - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)

  Intel VMD host bridge driver:
   - Factor out physical offset, bus offset, IRQ domain, IRQ allocation
     (Jon Derrick)
   - Use generic PCI PM correctly (Jon Derrick)

  Marvell Aardvark PCIe controller driver:
   - Fix compilation on s390 (Pali Rohár)
   - Implement driver 'remove' function and allow to build it as module
     (Pali Rohár)
   - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
   - Convert mvebu a3700 internal SMCC firmware return codes to errno
     (Pali Rohár)
   - Fix initialization with old Marvell's Arm Trusted Firmware (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:
   - Fix hibernation in case interrupts are not re-created (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:
   - Stop checking return value of debugfs_create() functions (Greg
     Kroah-Hartman)
   - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)

  Qualcomm PCIe controller driver:
   - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)

  Renesas R-Car PCIe controller driver:
   - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
     (Lad Prabhakar)
   - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
   - Add DT support for r8a7742 (Lad Prabhakar)

  Socionext UniPhier Pro5 controller driver:
   - Add DT descriptions of iATU register (host and endpoint) (Kunihiko
     Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
     unavoidable) (Hou Zhiqiang)
   - Fix endpoint Header Type check so multi-function devices work (Hou
     Zhiqiang)
   - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
   - Stop leaking MSI page in suspend/resume (Jisheng Zhang)
   - Add common iATU register support instead of keystone-specific code
     (Kunihiko Hayashi)
   - Major config space access and other cleanups in dwc core and
     drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
     kirin, meson, qcom, tegra) (Rob Herring)
   - Add multiple PFs support for endpoint (Xiaowei Bao)
   - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)

  Miscellaneous:
   - Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
   - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
   - Fix "cast truncates bits from constant value" warnings (Gustavo
     Pimentel)
   - Remove redundant zeroing for sg_init_table() (Julia Lawall)
   - Use scnprintf(), not snprintf(), in sysfs "show" functions
     (Krzysztof Wilczyński)
   - Remove unused assignments (Krzysztof Wilczyński)
   - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
   - Simplify bool comparisons (Krzysztof Wilczyński)
   - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
     Miao)
   - Simplify return expressions (Qinglang Miao)"

* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
  PCI: vmd: Update VMD PM to correctly use generic PCI PM
  PCI: vmd: Create IRQ allocation helper
  PCI: vmd: Create IRQ Domain configuration helper
  PCI: vmd: Create bus offset configuration helper
  PCI: vmd: Create physical offset helper
  PCI: v3-semi: Remove unneeded break
  PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
  PCI/ASPM: Remove struct pcie_link_state.l1ss
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
  PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
  PCI/ASPM: Remove struct aspm_register_info.latency_encoding
  PCI/ASPM: Remove struct aspm_register_info.enabled
  PCI/ASPM: Remove struct aspm_register_info.support
  PCI/ASPM: Use 'parent' and 'child' for readability
  PCI/ASPM: Move LTR path check to where it's used
  PCI/ASPM: Move pci_clear_and_set_dword() earlier
  PCI: dwc: Fix MSI page leakage in suspend/resume
  ...
2020-10-22 12:41:00 -07:00
Linus Torvalds
709ebe6dff ARM development for 5.10-rc1:
- handle inexact watchpoint addresses from Douglas Anderson.
 - decompressor serial debug cleanups from Linus Walleij.
 - update L2 cache prefetch bits from Guillaume Tucker.
 - add text offset and malloc size to the decompressor kexec data.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl+MwEcACgkQ9OeQG+St
 rGSfEw//QywY4JWkK/4Qi35jiihr4b6ANUDbai2QbeOMCu00aUfpRXTmm/J6/+LU
 ACFLW456L405PmdPx6GirpRvkUOoGnfs/SMwO3GCxiK02vtnh7Ewy4wQi5ZbeIXQ
 0scYBadzdpt3WVI/Lxq9grN476X2xZetwpZq05H4WHip6xwTH/JNeMPNhNuP1HgQ
 GoTFl+xTA8SirNobzzrhpLfBja3xdN6lVjmB6b+DdBBtbgh/k/4oFjLT1eHAJ511
 SBQWuN3GjXMXhDfX93g+17qJNZE40593DSMzgdnK5KrxEC2YzsbGNI0eulID6Zlf
 lhB9kktvEZ5NfnItBUFqB+To+8Jr0eRu1Dj2Bu9qJ6c4pNo6bDt++D45Aj/jADKx
 wrLiuOl4g9wJ376DJCp6+LkDAcwaAjg4QTdt8GfAEifbnPCTq74vaKo2xGTeBI1E
 sbxaXcSSan+uP6NA7/cq/SwEhgA9knyCICgFNXb68hEyR4X9CCMPav+3tNOz6V8E
 u62DQkKJU2v7wnwR7lDJxKu08xlf2XBX3P+OSA0FlMYbTsBmKveTywIqEzKNQWvm
 e0gdgWIfCKfQmxVmpuS+3zsSTR1ZSmLkSwTV22juoJ9jQn2p6n5LJnnzT/Pl3ldS
 WG0DVGQYQSkgSkrbsiudZ70HfrK6UAm4VkJR5ay98HyS3XT537k=
 =0hdr
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - handle inexact watchpoint addresses (Douglas Anderson)

 - decompressor serial debug cleanups (Linus Walleij)

 - update L2 cache prefetch bits (Guillaume Tucker)

 - add text offset and malloc size to the decompressor kexec data

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: add malloc size to decompressor kexec size structure
  ARM: add TEXT_OFFSET to decompressor kexec image structure
  ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values
  ARM: 9010/1: uncompress: Print the location of appended DTB
  ARM: 9009/1: uncompress: Enable debug in head.S
  ARM: 9008/1: uncompress: Drop excess whitespace print
  ARM: 9006/1: uncompress: Wait for ready and busy in debug prints
  ARM: 9005/1: debug: Select flow control for all debug UARTs
  ARM: 9004/1: debug: Split waituart to CTS and TXRDY
  ARM: 9003/1: uncompress: Delete unused debug macros
  ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses
2020-10-20 09:18:31 -07:00
Linus Torvalds
5a32c3413d dma-mapping updates for 5.10
- rework the non-coherent DMA allocator
  - move private definitions out of <linux/dma-mapping.h>
  - lower CMA_ALIGNMENT (Paul Cercueil)
  - remove the omap1 dma address translation in favor of the common
    code
  - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
  - support per-node DMA CMA areas (Barry Song)
  - increase the default seg boundary limit (Nicolin Chen)
  - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
  - various cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IiPwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPKEQ//TM8vxjucnRl/pklpMin49dJorwiVvROLhQqLmdxw
 286ZKpVzYYAPc7LnNqwIBugnFZiXuHu8xPKQkIiOa2OtNDTwhKNoBxOAmOJaV6DD
 8JfEtZYeX5mKJ/Nqd2iSkIqOvCwZ9Wzii+aytJ2U88wezQr1fnyF4X49MegETEey
 FHWreSaRWZKa0MMRu9AQ0QxmoNTHAQUNaPc0PeqEtPULybfkGOGw4/ghSB7WcKrA
 gtKTuooNOSpVEHkTas2TMpcBp6lxtOjFqKzVN0ml+/nqq5NeTSDx91VOCX/6Cj76
 mXIg+s7fbACTk/BmkkwAkd0QEw4fo4tyD6Bep/5QNhvEoAriTuSRbhvLdOwFz0EF
 vhkF0Rer6umdhSK7nPd7SBqn8kAnP4vBbdmB68+nc3lmkqysLyE4VkgkdH/IYYQI
 6TJ0oilXWFmU6DT5Rm4FBqCvfcEfU2dUIHJr5wZHqrF2kLzoZ+mpg42fADoG4GuI
 D/oOsz7soeaRe3eYfWybC0omGR6YYPozZJ9lsfftcElmwSsFrmPsbO1DM5IBkj1B
 gItmEbOB9ZK3RhIK55T/3u1UWY3Uc/RVr+kchWvADGrWnRQnW0kxYIqDgiOytLFi
 JZNH8uHpJIwzoJAv6XXSPyEUBwXTG+zK37Ce769HGbUEaUrE71MxBbQAQsK8mDpg
 7fM=
 =Bkf/
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - rework the non-coherent DMA allocator

 - move private definitions out of <linux/dma-mapping.h>

 - lower CMA_ALIGNMENT (Paul Cercueil)

 - remove the omap1 dma address translation in favor of the common code

 - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)

 - support per-node DMA CMA areas (Barry Song)

 - increase the default seg boundary limit (Nicolin Chen)

 - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)

 - various cleanups

* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
  ARM/ixp4xx: add a missing include of dma-map-ops.h
  dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
  dma-direct: factor out a dma_direct_alloc_from_pool helper
  dma-direct check for highmem pages in dma_direct_alloc_pages
  dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
  dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
  dma-mapping: move dma-debug.h to kernel/dma/
  dma-mapping: remove <asm/dma-contiguous.h>
  dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
  dma-contiguous: remove dma_contiguous_set_default
  dma-contiguous: remove dev_set_cma_area
  dma-contiguous: remove dma_declare_contiguous
  dma-mapping: split <linux/dma-mapping.h>
  cma: decrease CMA_ALIGNMENT lower limit to 2
  firewire-ohci: use dma_alloc_pages
  dma-iommu: implement ->alloc_noncoherent
  dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
  dma-mapping: add a new dma_alloc_pages API
  dma-mapping: remove dma_cache_sync
  53c700: convert to dma_alloc_noncoherent
  ...
2020-10-15 14:43:29 -07:00
Linus Torvalds
0b8417c141 Power management updates for 5.10-rc1
- Rework cpufreq statistics collection to allow it to take place
    when fast frequency switching is enabled in the governor (Viresh
    Kumar).
 
  - Make the cpufreq core set the frequency scale on behalf of the
    driver and update several cpufreq drivers accordingly (Ionela
    Voinescu, Valentin Schneider).
 
  - Add new hardware support to the STI and qcom cpufreq drivers and
    improve them (Alain Volmat, Manivannan Sadhasivam).
 
  - Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
    Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
    Gerhold, Viresh Kumar).
 
  - Fix several assorted issues in the operating performance points
    (OPP) framework (Stephan Gerhold, Viresh Kumar).
 
  - Allow devfreq drivers to fetch devfreq instances by DT enumeration
    instead of using explicit phandles and modify the devfreq core
    code to support driver-specific devfreq DT bindings (Leonard
    Crestez, Chanwoo Choi).
 
  - Improve initial hardware resetting in the tegra30 devfreq driver
    and clean up the tegra cpuidle driver (Dmitry Osipenko).
 
  - Update the cpuidle core to collect state entry rejection
    statistics and expose them via sysfs (Lina Iyer).
 
  - Improve the ACPI _CST code handling diagnostics (Chen Yu).
 
  - Update the PSCI cpuidle driver to allow the PM domain
    initialization to occur in the OSI mode as well as in the PC
    mode (Ulf Hansson).
 
  - Rework the generic power domains (genpd) core code to allow
    domain power off transition to be aborted in the absence of the
    "power off" domain callback (Ulf Hansson).
 
  - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
    Wysocki).
 
  - Fix the handling of timer_expires in the PM-runtime framework on
    32-bit systems and the handling of device links in it (Grygorii
    Strashko, Xiang Chen).
 
  - Add IO requests batching support to the hibernate image saving and
    reading code and drop a bogus get_gendisk() from there (Xiaoyi
    Chen, Christoph Hellwig).
 
  - Allow PCIe ports to be put into the D3cold power state if they
    are power-manageable via ACPI (Lukas Wunner).
 
  - Add missing header file include to a power capping driver (Pujin
    Shi).
 
  - Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
 
  - Kevin Hilman steps down as designated reviwer of adaptive voltage
    scaling (AVS) driverrs (Kevin Hilman).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl+F4A4SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxX6QP/iELq9/OsH0aJdDQlY9tnh2Oa13+HB/Y
 w1e6W+ZR/YjPgUpMVARwRLKf/gn7dUEwRDHVpGvDOyun+HACCPHB2hg8iktbxdVl
 NFAVGZCCRezXqz3opL1hl8C3Dh0CqUPUjWXGMr+Lw2TZQKT+hx9K1dm9Epe3ivyT
 RlVH/wifei80cFRcUUj7DI5KLCAyk+uKkZIFnZHAGKK6qOHMqRL5sDZsMUwWpd2i
 AdghABjePbaiLTAoZuUsJINAGY4DnIt6ASRdMJ4iksiD6pFITwFs0HSOPe7hZLlv
 zbwDPI5+TIkrOy9/aWoMaEIH1OQiFN/O++Slvdjn7gMsRgoW4d300ru4Jo1pOHxb
 5twxagCCqlOf4YAaSrMCH4HT+c6fOWoGj2AKzX3DMJyO3/WN+8XNvUxKtC5Px1u+
 pWRASjfQMO2j6nNjTCTwDJdYzggiKa54rYH2k7svX7XnTIAf+2E1gv8b4rMTgQrZ
 0rq9kULYlhgk3EYjd/DndkvxunRlmiqhzrYB4jc9eDSPNzB8FZEbw1ZMRQTFfjK0
 kp0vaEpTJ7JfKSCfluB4UmTuQoGogLl0xbzc+2NNIpwdNmrH2Srvq6wbj35jEDTU
 tqsTsBP+XZFOWyFOw/L2J47LTOp0TJnz8z4aycLfrmdNUVnXJoU1sXgFlDzETMgT
 0E6cTVwLF7Zi
 =rGhy
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These rework the collection of cpufreq statistics to allow it to take
  place if fast frequency switching is enabled in the governor, rework
  the frequency invariance handling in the cpufreq core and drivers, add
  new hardware support to a couple of cpufreq drivers, fix a number of
  assorted issues and clean up the code all over.

  Specifics:

   - Rework cpufreq statistics collection to allow it to take place when
     fast frequency switching is enabled in the governor (Viresh Kumar).

   - Make the cpufreq core set the frequency scale on behalf of the
     driver and update several cpufreq drivers accordingly (Ionela
     Voinescu, Valentin Schneider).

   - Add new hardware support to the STI and qcom cpufreq drivers and
     improve them (Alain Volmat, Manivannan Sadhasivam).

   - Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
     Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
     Gerhold, Viresh Kumar).

   - Fix several assorted issues in the operating performance points
     (OPP) framework (Stephan Gerhold, Viresh Kumar).

   - Allow devfreq drivers to fetch devfreq instances by DT enumeration
     instead of using explicit phandles and modify the devfreq core code
     to support driver-specific devfreq DT bindings (Leonard Crestez,
     Chanwoo Choi).

   - Improve initial hardware resetting in the tegra30 devfreq driver
     and clean up the tegra cpuidle driver (Dmitry Osipenko).

   - Update the cpuidle core to collect state entry rejection statistics
     and expose them via sysfs (Lina Iyer).

   - Improve the ACPI _CST code handling diagnostics (Chen Yu).

   - Update the PSCI cpuidle driver to allow the PM domain
     initialization to occur in the OSI mode as well as in the PC mode
     (Ulf Hansson).

   - Rework the generic power domains (genpd) core code to allow domain
     power off transition to be aborted in the absence of the "power
     off" domain callback (Ulf Hansson).

   - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
     Wysocki).

   - Fix the handling of timer_expires in the PM-runtime framework on
     32-bit systems and the handling of device links in it (Grygorii
     Strashko, Xiang Chen).

   - Add IO requests batching support to the hibernate image saving and
     reading code and drop a bogus get_gendisk() from there (Xiaoyi
     Chen, Christoph Hellwig).

   - Allow PCIe ports to be put into the D3cold power state if they are
     power-manageable via ACPI (Lukas Wunner).

   - Add missing header file include to a power capping driver (Pujin
     Shi).

   - Clean up the qcom-cpr AVS driver a bit (Liu Shixin).

   - Kevin Hilman steps down as designated reviwer of adaptive voltage
     scaling (AVS) drivers (Kevin Hilman)"

* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
  cpufreq: stats: Fix string format specifier mismatch
  arm: disable frequency invariance for CONFIG_BL_SWITCHER
  cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
  cpufreq: stats: Add memory barrier to store_reset()
  cpufreq: schedutil: Simplify sugov_fast_switch()
  ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
  ACPI: EC: PM: Flush EC work unconditionally after wakeup
  PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
  PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
  cpufreq: Move traces and update to policy->cur to cpufreq core
  cpufreq: stats: Enable stats for fast-switch as well
  cpufreq: stats: Mark few conditionals with unlikely()
  cpufreq: stats: Remove locking
  cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
  PM: domains: Allow to abort power off when no ->power_off() callback
  PM: domains: Rename power state enums for genpd
  PM / devfreq: tegra30: Improve initial hardware resetting
  PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
  PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
  PM / devfreq: Add devfreq_get_devfreq_by_node function
  ...
2020-10-14 10:45:41 -07:00
Linus Torvalds
a09b1d7850 xen: branch for v5.10-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX4aNVgAKCRCAXGG7T9hj
 vlrDAQDQ2qelTKKMEV9atKr0RTkHAKrhUidzlTINjFx7BIrTfQEA7TmDr3j0weQU
 521+bxE803OEWElp2Qta30boXgGGXQo=
 =jKt7
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

 - two small cleanup patches

 - avoid error messages when initializing MCA banks in a Xen dom0

 - a small series for converting the Xen gntdev driver to use
   pin_user_pages*() instead of get_user_pages*()

 - intermediate fix for running as a Xen guest on Arm with KPTI enabled
   (the final solution will need new Xen functionality)

* tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: Fix typo in xen_pagetable_p2m_free()
  x86/xen: disable Firmware First mode for correctable memory errors
  xen/arm: do not setup the runstate info page if kpti is enabled
  xen: remove redundant initialization of variable ret
  xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*()
  xen/gntdev.c: Mark pages as dirty
2020-10-14 10:34:45 -07:00
Matthew Wilcox
b2b29d6d01 mm: account PMD tables like PTE tables
We account the PTE level of the page tables to the process in order to
make smarter OOM decisions and help diagnose why memory is fragmented.
For these same reasons, we should account pages allocated for PMDs.  With
larger process address spaces and ASLR, the number of PMDs in use is
higher than it used to be so the inaccuracy is starting to matter.

[rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor]
  Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.com

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Link: http://lkml.kernel.org/r/20200627184642.GF25039@casper.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:31 -07:00
Linus Torvalds
c90578360c Merge branch 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull copy_and_csum cleanups from Al Viro:
 "Saner calling conventions for csum_and_copy_..._user() and friends"

[ Removing 800+ lines of code and cleaning stuff up is good  - Linus ]

* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ppc: propagate the calling conventions change down to csum_partial_copy_generic()
  amd64: switch csum_partial_copy_generic() to new calling conventions
  sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
  xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
  mips: propagate the calling convention change down into __csum_partial_copy_..._user()
  mips: __csum_partial_copy_kernel() has no users left
  mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
  sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
  i386: propagate the calling conventions change down to csum_partial_copy_generic()
  sh: propage the calling conventions change down to csum_partial_copy_generic()
  m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
  arm: propagate the calling convention changes down to csum_partial_copy_from_user()
  alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
  saner calling conventions for csum_and_copy_..._user()
  csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
  csum_partial_copy_nocheck(): drop the last argument
  unify generic instances of csum_partial_copy_nocheck()
  icmp_push_reply(): reorder adding the checksum up
  skb_copy_and_csum_bits(): don't bother with the last argument
2020-10-12 16:24:13 -07:00
Linus Torvalds
34eb62d868 Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle them
 (include these bits into the output image vs discarding them silently)
 are both highly idiosyncratic and also version dependent.
 
 Instead of this historically problematic mess, this tree by Kees Cook (et al)
 adds build time asserts and build time warnings if there's any orphan section
 in the kernel or if a section is not sized as expected.
 
 And because we relied on so many silent assumptions in this area, fix a metric
 ton of dependencies and some outright bugs related to this, before we can
 finally enable the checks on the x86, ARM and ARM64 platforms.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Edv4RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hiKBAApdJEOaK7hMc3013DYNctklIxEPJL2mFJ
 11YJRIh4pUJTF0TE+EHT/D+rSIuRsyuoSmOQBQ61/wVSnyG067GjjVJRqh/eYaJ1
 fDhJi2FuHOjXl+CiN0KxzBjjp+V4NhF7jHT59tpQSvfZeg7FjteoxfztxaCp5ek3
 S3wHB3CC4c4jE3lfjHem1E9/PwT4kwPYx1c3gAUdEqJdjkihjX9fWusfjLeqW6/d
 Y5VkApi6bL9XiZUZj5l0dEIweLJJ86+PkKJqpo3spxxEak1LSn1MEix+lcJ8e1Kg
 sb/bEEivDcmFlFWOJnn0QLquCR0Cx5bz1pwsL0tuf0yAd4+sXX5IMuGUysZlEdKM
 BHL9h5HbevGF4BScwZwZH7lyEg7q67s5KnRu4hxy0Swfcj7y0oT/9lXqpbpZ2DqO
 Hd+bRRQKIbqnTMp0hcit9LfpLp93vj0dBlaV5ocAJJlu62u9VnwGG5HQuZ5giLUr
 kA1SLw63Y1wopFRxgFyER8les7eLsu0zxHeK44rRVlVnfI99OMTOgVNicmDFy3Fm
 AfcnfJG0BqBEJGQz5es34uQQKKBwFPtC9NztopI62KiwOspYYZyrO1BNxdOc6DlS
 mIHrmO89HMXuid5eolvLaFqUWirHoWO8TlycgZxUWVHc2txVPjAEU/axouU/dSSU
 w/6GpzAa+7g=
 =fXAw
 -----END PGP SIGNATURE-----

Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull orphan section checking from Ingo Molnar:
 "Orphan link sections were a long-standing source of obscure bugs,
  because the heuristics that various linkers & compilers use to handle
  them (include these bits into the output image vs discarding them
  silently) are both highly idiosyncratic and also version dependent.

  Instead of this historically problematic mess, this tree by Kees Cook
  (et al) adds build time asserts and build time warnings if there's any
  orphan section in the kernel or if a section is not sized as expected.

  And because we relied on so many silent assumptions in this area, fix
  a metric ton of dependencies and some outright bugs related to this,
  before we can finally enable the checks on the x86, ARM and ARM64
  platforms"

* tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  x86/boot/compressed: Warn on orphan section placement
  x86/build: Warn on orphan section placement
  arm/boot: Warn on orphan section placement
  arm/build: Warn on orphan section placement
  arm64/build: Warn on orphan section placement
  x86/boot/compressed: Add missing debugging sections to output
  x86/boot/compressed: Remove, discard, or assert for unwanted sections
  x86/boot/compressed: Reorganize zero-size section asserts
  x86/build: Add asserts for unwanted sections
  x86/build: Enforce an empty .got.plt section
  x86/asm: Avoid generating unused kprobe sections
  arm/boot: Handle all sections explicitly
  arm/build: Assert for unwanted sections
  arm/build: Add missing sections
  arm/build: Explicitly keep .ARM.attributes sections
  arm/build: Refactor linker script headers
  arm64/build: Assert for unwanted sections
  arm64/build: Add missing DWARF sections
  arm64/build: Use common DISCARDS in linker script
  arm64/build: Remove .eh_frame* sections due to unwind tables
  ...
2020-10-12 13:39:19 -07:00
Linus Torvalds
e6412f9833 EFI changes for v5.10:
- Preliminary RISC-V enablement - the bulk of it will arrive via the RISCV tree.
 
  - Relax decompressed image placement rules for 32-bit ARM
 
  - Add support for passing MOK certificate table contents via a config table
    rather than a EFI variable.
 
  - Add support for 18 bit DIMM row IDs in the CPER records.
 
  - Work around broken Dell firmware that passes the entire Boot#### variable
    contents as the command line
 
  - Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we can
    identify it in the memory map listings.
 
  - Don't abort the boot on arm64 if the EFI RNG protocol is available but
    returns with an error
 
  - Replace slashes with exclamation marks in efivarfs file names
 
  - Split efi-pstore from the deprecated efivars sysfs code, so we can
    disable the latter on !x86.
 
  - Misc fixes, cleanups and updates.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Ec9QRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1inTQ//TYj3kJq/7sWfUAxmAsWnUEC005YCNf0T
 x3kJQv3zYX4Rl4eEwkff8S1PrqqvwUP5yUZYApp8HD9s9CYvzz5iG5xtf/jX+QaV
 06JnTMnkoycx2NaOlbr1cmcIn4/cAhQVYbVCeVrlf7QL8enNTBr5IIQmo4mgP8Lc
 mauSsO1XU8ZuMQM+JcZSxAkAPxlhz3dbR5GteP4o2K4ShQKpiTCOfOG1J3FvUYba
 s1HGnhHFlkQr6m3pC+iG8dnAG0YtwHMH1eJVP7mbeKUsMXz944U8OVXDWxtn81pH
 /Xt/aFZXnoqwlSXythAr6vFTuEEn40n+qoOK6jhtcGPUeiAFPJgiaeAXw3gO0YBe
 Y8nEgdGfdNOMih94McRd4M6gB/N3vdqAGt+vjiZSCtzE+nTWRyIXSGCXuDVpkvL4
 VpEXpPINnt1FZZ3T/7dPro4X7pXALhODE+pl36RCbfHVBZKRfLV1Mc1prAUGXPxW
 E0MfaM9TxDnVhs3VPWlHmRgavee2MT1Tl/ES4CrRHEoz8ZCcu4MfROQyao8+Gobr
 VR+jVk+xbyDrykEc6jdAK4sDFXpTambuV624LiKkh6Mc4yfHRhPGrmP5c5l7SnCd
 aLp+scQ4T7sqkLuYlXpausXE3h4sm5uur5hNIRpdlvnwZBXpDEpkzI8x0C9OYr0Q
 kvFrreQWPLQ=
 =ZNI8
 -----END PGP SIGNATURE-----

Merge tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI changes from Ingo Molnar:

 - Preliminary RISC-V enablement - the bulk of it will arrive via the
   RISCV tree.

 - Relax decompressed image placement rules for 32-bit ARM

 - Add support for passing MOK certificate table contents via a config
   table rather than a EFI variable.

 - Add support for 18 bit DIMM row IDs in the CPER records.

 - Work around broken Dell firmware that passes the entire Boot####
   variable contents as the command line

 - Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
   can identify it in the memory map listings.

 - Don't abort the boot on arm64 if the EFI RNG protocol is available
   but returns with an error

 - Replace slashes with exclamation marks in efivarfs file names

 - Split efi-pstore from the deprecated efivars sysfs code, so we can
   disable the latter on !x86.

 - Misc fixes, cleanups and updates.

* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  efi: mokvar: add missing include of asm/early_ioremap.h
  efi: efivars: limit availability to X86 builds
  efi: remove some false dependencies on CONFIG_EFI_VARS
  efi: gsmi: fix false dependency on CONFIG_EFI_VARS
  efi: efivars: un-export efivars_sysfs_init()
  efi: pstore: move workqueue handling out of efivars
  efi: pstore: disentangle from deprecated efivars module
  efi: mokvar-table: fix some issues in new code
  efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
  efivarfs: Replace invalid slashes with exclamation marks in dentries.
  efi: Delete deprecated parameter comments
  efi/libstub: Fix missing-prototypes in string.c
  efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
  cper,edac,efi: Memory Error Record: bank group/address and chip id
  edac,ghes,cper: Add Row Extension to Memory Error Record
  efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
  efi/libstub: Add efi_warn and *_once logging helpers
  integrity: Load certs from the EFI MOK config table
  integrity: Move import of MokListRT certs to a separate routine
  efi: Support for MOK variable config table
  ...
2020-10-12 13:26:49 -07:00
Ionela Voinescu
6699e91c07 arm: disable frequency invariance for CONFIG_BL_SWITCHER
big.LITTLE switching complicates the setting of a correct cpufreq-based
frequency invariance scale factor due to (as observed in
drivers/cpufreq/vexpress-spc-cpufreq.c):
 - Incorrect current and maximum frequencies as a result of the
   exposure of a virtual frequency table to the cpufreq core,
 - Missed updates as a result of asynchronous frequency adjustments
   caused by frequency changes in other CPU pairs.

Given that its functionality is atypical in regards to frequency
invariance and this is an old technology, disable frequency
invariance for when big.LITTLE switching is configured in to prevent
incorrect scale setting.

Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08 17:17:27 +02:00
Ionela Voinescu
a20b7053b5 cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
Compared to other arch_* functions, arch_set_freq_scale() has an atypical
weak definition that can be replaced by a strong architecture specific
implementation.

The more typical support for architectural functions involves defining
an empty stub in a header file if the symbol is not already defined in
architecture code. Some examples involve:
 - #define arch_scale_freq_capacity	topology_get_freq_scale
 - #define arch_scale_freq_invariant	topology_scale_freq_invariant
 - #define arch_scale_cpu_capacity	topology_get_cpu_scale
 - #define arch_update_cpu_topology	topology_update_cpu_topology
 - #define arch_scale_thermal_pressure	topology_get_thermal_pressure
 - #define arch_set_thermal_pressure	topology_set_thermal_pressure

Bring arch_set_freq_scale() in line with these functions by renaming it to
topology_set_freq_scale() in the arch topology driver, and by defining the
arch_set_freq_scale symbol to point to the new function for arm and arm64.

While there are other users of the arch_topology driver, this patch defines
arch_set_freq_scale for arm and arm64 only, due to their existing
definitions of arch_scale_freq_capacity. This is the getter function of the
frequency invariance scale factor and without a getter function, the
setter function - arch_set_freq_scale() has not purpose.

Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com> (BL_SWITCHER and topology parts)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08 17:17:27 +02:00
Christoph Hellwig
a1fd09e8e6 dma-mapping: move dma-debug.h to kernel/dma/
Most of dma-debug.h is not required by anything outside of kernel/dma.
Move the four declarations needed by dma-mappin.h or dma-ops providers
into dma-mapping.h and dma-map-ops.h, and move the remainder of the
file to kernel/dma/debug.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06 07:07:05 +02:00
Christoph Hellwig
5db5d93089 dma-mapping: remove <asm/dma-contiguous.h>
Just provide a weak default definition of dma_contiguous_early_fixup and
let arm override it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06 07:07:05 +02:00
Stefano Stabellini
f88af7229f xen/arm: do not setup the runstate info page if kpti is enabled
The VCPUOP_register_runstate_memory_area hypercall takes a virtual
address of a buffer as a parameter. The semantics of the hypercall are
such that the virtual address should always be valid.

When KPTI is enabled and we are running userspace code, the virtual
address is not valid, thus, Linux is violating the semantics of
VCPUOP_register_runstate_memory_area.

Do not call VCPUOP_register_runstate_memory_area when KPTI is enabled.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
CC: Bertrand Marquis <Bertrand.Marquis@arm.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Link: https://lore.kernel.org/r/20200924234955.15455-1-sstabellini@kernel.org
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-04 18:41:33 -05:00
Christoph Hellwig
38225f2ef2 ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets
Switch the omap1510 platform ohci device to use dma_direct_set_offset
to set the DMA offset instead of using direct hooks into the DMA
mapping code and remove the now unused hooks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2020-09-25 06:15:32 +02:00
Masahiro Yamada
596b0474d3 kbuild: preprocess module linker script
There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)

The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.

You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.

scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.

You can add arch-specific sections in <asm/module.lds.h>.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
2020-09-25 00:36:41 +09:00
Lorenzo Pieralisi
fc177304d1 ARM/PCI: Remove unused fields from struct hw_pci
The msi_ctrl, io_optional and align_resource fields in struct hw_pci are
currently unused by arm/mach PCI host controller drivers and we won't
be adding any new users.

Remove them and related code.

Link: https://lore.kernel.org/r/20200904141607.4066-1-lorenzo.pieralisi@arm.com
Link: https://lore.kernel.org/r/20200916103045.28651-1-lorenzo.pieralisi@arm.com
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
2020-09-18 22:39:09 +01:00
Valentin Schneider
15e5d5b45b arch_topology, arm, arm64: define arch_scale_freq_invariant()
arch_scale_freq_invariant() is used by schedutil to determine whether
the scheduler's load-tracking signals are frequency invariant. Its
definition is overridable, though by default it is hardcoded to 'true'
if arch_scale_freq_capacity() is defined ('false' otherwise).

This behaviour is not overridden on arm, arm64 and other users of the
generic arch topology driver, which is somewhat precarious:
arch_scale_freq_capacity() will always be defined, yet not all cpufreq
drivers are guaranteed to drive the frequency invariance scale factor
setting. In other words, the load-tracking signals may very well *not*
be frequency invariant.

Now that cpufreq can be queried on whether the current driver is driving
the Frequency Invariance (FI) scale setting, the current situation can
be improved. This combines the query of whether cpufreq supports the
setting of the frequency scale factor, with whether all online CPUs are
counter-based FI enabled.

While cpufreq FI enablement applies at system level, for all CPUs,
counter-based FI support could also be used for only a subset of CPUs to
set the invariance scale factor. Therefore, if cpufreq-based FI support
is present, we consider the system to be invariant. If missing, we
require all online CPUs to be counter-based FI enabled in order for the
full system to be considered invariant.

If the system ends up not being invariant, a new condition is needed in
the counter initialization code that disables all scale factor setting
based on counters.

Precedence of counters over cpufreq use is not important here. The
invariant status is only given to the system if all CPUs have at least
one method of setting the frequency scale factor.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-18 19:11:20 +02:00
Jim Quinlan
e0d072782c dma-mapping: introduce DMA range map, supplanting dma_pfn_offset
The new field 'dma_range_map' in struct device is used to facilitate the
use of single or multiple offsets between mapping regions of cpu addrs and
dma addrs.  It subsumes the role of "dev->dma_pfn_offset" which was only
capable of holding a single uniform offset and had no region bounds
checking.

The function of_dma_get_range() has been modified so that it takes a single
argument -- the device node -- and returns a map, NULL, or an error code.
The map is an array that holds the information regarding the DMA regions.
Each range entry contains the address offset, the cpu_start address, the
dma_start address, and the size of the region.

of_dma_configure() is the typical manner to set range offsets but there are
a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
driver code.  These cases now invoke the function
dma_direct_set_offset(dev, cpu_addr, dma_addr, size).

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[hch: various interface cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2020-09-17 18:43:56 +02:00
Christoph Hellwig
3799e402a4 ARM/dma-mapping: move various helpers from dma-mapping.h to dma-direct.h
Move the helpers to translate to and from direct mapping DMA addresses
to dma-direct.h.  This not only is the most logical place, but the new
placement also avoids dependency loops with pending commits.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-17 18:43:24 +02:00
Christoph Hellwig
002a26fb55 ARM/dma-mapping: remove dma_to_virt
dma_to_virt is entirely unused, remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-17 18:43:24 +02:00
Christoph Hellwig
f982438e82 ARM/dma-mapping: remove a __arch_page_to_dma #error
The __arch_page_to_dma hook is long gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-17 18:43:24 +02:00
Marc Zyngier
5ebf353af2 ARM: Remove custom IRQ stat accounting
Let's switch the arm code to the core accounting, which already
does everything we need.

Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17 16:37:28 +01:00
Marc Zyngier
8aa837cb7a ARM: Kill __smp_cross_call and co
The old IPI registration interface is now unused on arm, so let's
get rid of it.

Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17 16:37:28 +01:00
Ard Biesheuvel
6208857b8f efi/libstub: arm32: Base FDT and initrd placement on image address
The way we use the base of DRAM in the EFI stub is problematic as it
is ill defined what the base of DRAM actually means. There are some
restrictions on the placement of FDT and initrd which are defined in
terms of dram_base, but given that the placement of the kernel in
memory is what defines these boundaries (as on ARM, this is where the
linear region starts), it is better to use the image address in these
cases, and disregard dram_base altogether.

Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Tested-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-09-16 18:53:42 +03:00
Linus Walleij
4df24fef09 ARM: 9005/1: debug: Select flow control for all debug UARTs
Instead of a flow control selection mechanism specifically for
8250, make this available for all debug UARTs. If the debug
UART supports waiting for CTS to be asserted, then this code
can be activated for terminals that need it.

We keep the defaults for EBSA110, Footbridge, Gemini and RPC
so that this still works as expected for these older platforms:
they assume that flow control shall be enabled for debug
prints.

I switch the location of the check for
ifdef CONFIG_DEBUG_UART_FLOW_CONTROL from the actual debug
UART drivers: the code would get compiled-out for 8250 and
Tegra unless their custom config (or passing -DFLOW_CONTROL
in the Tegra case) was not set. Instead this is conditional
at the three places where we print debug messages. The idea
is that debug UARTs can be implemented without this ifdef
boilerplate so they look cleaner, alas the ifdef has to be
somewhere.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-09-15 14:35:28 +01:00
Linus Walleij
2c50a570e9 ARM: 9004/1: debug: Split waituart to CTS and TXRDY
This patch was triggered by a remark from Russell that
introducing a call to the waituart (needed to fix debug prints
on the Qualcomm platforms) was dangerous because in some cases
this will involve waiting for a modem CTS (clear to send)
signal, and debug messages would maybe not work on platforms
with no modem connected to the UART port: they will just
hang waiting for the modem to assert CTS and this might never
happen.

Looking through all UART debug drivers implementing the waituart
macro I discovered that all users except two actually use this
macro to check if the UART is ready for TX, let's call this
TXRDY.

Only two debug UART drivers actually check for CTS:
- arch/arm/include/debug/8250.S
- arch/arm/include/debug/tegra.S

The former is very significant since the 8250 is possibly
the most common UART on the planet.

We have the following problem: the semantics of waituart are
ambiguous making it dangerous to introduce the macro to debug
code fixing debug prints for Qualcomm. To start to pry this
problem apart, this patch does the following:

- Convert all debug UART drivers to define two macros:

  - waituartcts with the clear semantic to wait for CTS
    to be asserted

  - waituarttxrdy with the clear semantic to wait for the TX
    capability of the UART to be ready

- When doing this take care to assign the right function to
  each drivers macro, so they now do exactly the above.

- Update the three sites in the kernel invoking the waituart
  macro to call waituartcts/waituarttxrdy in sequence, so that
  the functional impact on the kernel should be zero.

After this we can start to change the code sites using this
code to do the right thing.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-09-15 14:35:27 +01:00
Marc Zyngier
56afcd3dbd ARM: Allow IPIs to be handled as normal interrupts
In order to deal with IPIs as normal interrupts, let's add
a new way to register them with the architecture code.

set_smp_ipi_range() takes a range of interrupts, and allows
the arch code to request them as if the were normal interrupts.
A standard handler is then called by the core IRQ code to deal
with the IPI.

This means that we don't need to call irq_enter/irq_exit, and
that we don't need to deal with set_irq_regs either. So let's
move the dispatcher into its own function, and leave handle_IPI()
as a compatibility function.

On the sending side, let's make use of ipi_send_mask, which
already exists for this purpose.

One of the major difference is that we end up, in some cases
(such as when performing IRQ time accounting on the scheduler
IPI), end up with nested irq_enter()/irq_exit() pairs.
Other than the (relatively small) overhead, there should be
no consequences to it (these pairs are designed to nest
correctly, and the accounting shouldn't be off).

Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-13 17:05:39 +01:00
Christoph Hellwig
5ceda74093 dma-direct: rename and cleanup __phys_to_dma
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious.  Try
to improve the situation by renaming __phys_to_dma to
phys_to_dma_unencryped, and not forcing architectures that want to
override phys_to_dma to actually provide __phys_to_dma.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11 09:14:43 +02:00
Christoph Hellwig
7bc5c428a6 dma-direct: remove __dma_to_phys
There is no harm in just always clearing the SME encryption bit, while
significantly simplifying the interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11 09:14:25 +02:00
Florian Fainelli
4e5cafa8b3 ARM: brcmstb: Add debug UART entry for 72615
72165 has the same memory map as 7278 and the same physical address for
the UART, alias the definition accordingly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-04 13:42:16 -07:00
Kees Cook
0c918e753f arm/build: Assert for unwanted sections
In preparation for warning on orphan sections, enforce
expected-to-be-zero-sized sections (since discarding them might hide
problems with them suddenly gaining unexpected entries).

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/20200821194310.3089815-19-keescook@chromium.org
2020-09-01 10:03:18 +02:00
Kees Cook
512dd2eebe arm/build: Add missing sections
Add missing text stub sections .vfp11_veneer and .v4_bx, as well as
missing DWARF sections, when present in the build.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/20200821194310.3089815-18-keescook@chromium.org
2020-09-01 10:03:18 +02:00
Kees Cook
3b14aefb84 arm/build: Explicitly keep .ARM.attributes sections
In preparation for adding --orphan-handling=warn, explicitly keep the
.ARM.attributes section (at address 0[1]) by expanding the existing
ELF_DETAILS macro into ARM_DETAILS.

[1] https://reviews.llvm.org/D85867

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://lore.kernel.org/lkml/CAKwvOdk-racgq5pxsoGS6Vtifbtrk5fmkmnoLxrQMaOvV0nPWw@mail.gmail.com/
Link: https://lore.kernel.org/r/20200821194310.3089815-17-keescook@chromium.org
2020-09-01 10:03:18 +02:00
Kees Cook
d7e3b065dc arm/build: Refactor linker script headers
In preparation for adding --orphan-handling=warn, refactor the linker
script header includes, and extract common macros.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/20200821194310.3089815-16-keescook@chromium.org
2020-09-01 10:03:17 +02:00
Al Viro
1d60be3c25 arm: propagate the calling convention changes down to csum_partial_copy_from_user()
... and get rid of the "clean the destination on error" crap.
Simplifies the fault handlers and the function itself...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20 15:45:16 -04:00
Al Viro
c693cc4676 saner calling conventions for csum_and_copy_..._user()
All callers of these primitives will
	* discard anything we might've copied in case of error
	* ignore the csum value in case of error
	* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.

That suggest the following calling conventions:
	* don't pass err_ptr - just return 0 on error.
	* don't bother with zeroing destination, etc. in case of error
	* don't pass the initial sum - just use 0xffffffff.

This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff.  Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.

A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them.  Not sure if it's worth
a separate commit...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20 15:45:15 -04:00
Al Viro
cc44c17baf csum_partial_copy_nocheck(): drop the last argument
It's always 0.  Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.

However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20 15:45:14 -04:00
Al Viro
6e41c585e3 unify generic instances of csum_partial_copy_nocheck()
quite a few architectures have the same csum_partial_copy_nocheck() -
simply memcpy() the data and then return the csum of the copy.

hexagon, parisc, ia64, s390, um: explicitly spelled out that way.

arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32,
nios2, openrisc, riscv, unicore32: end up picking the same thing spelled
out in lib/checksum.h (with varying amounts of perversions along the way).

everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc,
sh, sparc, x86, xtensa) have non-generic variants.  For all except c6x
the declaration is in their asm/checksum.h.  c6x uses the wrapper
from asm-generic/checksum.h that would normally lead to the lib/checksum.h
instance, but in case of c6x we end up using an asm function from arch/c6x
instead.

Screw that mess - have architectures with private instances define
_HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default
one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY
*not* defined.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20 15:45:14 -04:00
Florian Fainelli
6b84ca265f ARM: brcmstb: Add debug UART entry for 72614
72164 has the same memory map as 7278 and the same physical address for
the UART, alias the definition accordingly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-08-17 09:20:34 -07:00
Linus Torvalds
b923f1247b A set oftimekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
    implementation.
 
    S390 requires that the VDSO data pointer is handed in to the counter
    read function when time namespace support is enabled. Adding the pointer
    is a NOOP for all other architectures because the compiler is supposed
    to optimize that out when it is unused in the architecture specific
    inline. The change also solved a similar problem for MIPS which
    fortunately has time namespaces not yet enabled.
 
    S390 needs to update clock related VDSO data independent of the
    timekeeping updates. This was solved so far with yet another sequence
    counter in the S390 implementation. A better solution is to utilize the
    already existing VDSO sequence count for this. The core code now exposes
    helper functions which allow to serialize against the timekeeper code
    and against concurrent readers.
 
    S390 needs extra data for their clock readout function. The initial
    common VDSO data structure did not provide a way to add that. It now has
    an embedded architecture specific struct embedded which defaults to an
    empty struct.
 
    Doing this now avoids tree dependencies and conflicts post rc1 and
    allows all other architectures which work on generic VDSO support to
    work from a common upstream base.
 
  - A trivial comment fix.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl82tGYTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoRkKD/9YEYlYPQ4omRNVNIJRnalBH6OB/GOk
 jTJ4RCvNP2ew6XtgEz5Yg1VqxrmJP4MLNCnMr7mQulfezUmslK0uJMlqZC4dgYth
 PUhliLyFi5PK+CKaY+2NFlZMAoE53YlJ2FVPq114FUW4ASVbucDPXpmhO22cc2Iu
 0RD3z9/+vQmA8lUqI6wPIFTC+euN+2kbkeZjt7BlkBAdiRBga5UnarFzetq0nWyc
 kcprQ2qZfGLYzRY6dRuvNLz27Ta7SAlVGOGUDpWr9MISLDFQzHwhVATDNFW3hLGT
 Fr5xNqStUVxxTzYkfCj/Podez0aR3por8bm9SoWxZn7oeLdLgTsDwn2pY0J0PjyB
 wWz9lmqT1vzrHEfQH1YhHvycowl6azue9rT2ERWwZTdbADEwu6Zr8ufv2XHcMu0J
 dyzSYa81cQrTeAwwdNjODs+QCTX+0G6u86AU2Xg+YgqkAywcAMvzcff/9D62hfv2
 5BSz+0OeitQCnSvHILUPw4XT/2rNZfhlcmc4tkzoBFewzDsMEqWT19p+GgqcRNiU
 5Jl4kGnaeHjP0e5Vn/ZJurKaF3YEJwgjkohDORloaqo0AXiYo1ANhDlKvSRu5hnU
 GDIWOVu8ATXwkjMFcLQz7O5/J1MqJCkleIjSCDjLDhhMbLY/nR9L3QS9jbqiVVRN
 nTZlSMF6HeQmew==
 =y8Z5
 -----END PGP SIGNATURE-----

Merge tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timekeeping updates from Thomas Gleixner:
 "A set of timekeeping/VDSO updates:

   - Preparatory work to allow S390 to switch over to the generic VDSO
     implementation.

     S390 requires that the VDSO data pointer is handed in to the
     counter read function when time namespace support is enabled.
     Adding the pointer is a NOOP for all other architectures because
     the compiler is supposed to optimize that out when it is unused in
     the architecture specific inline. The change also solved a similar
     problem for MIPS which fortunately has time namespaces not yet
     enabled.

     S390 needs to update clock related VDSO data independent of the
     timekeeping updates. This was solved so far with yet another
     sequence counter in the S390 implementation. A better solution is
     to utilize the already existing VDSO sequence count for this. The
     core code now exposes helper functions which allow to serialize
     against the timekeeper code and against concurrent readers.

     S390 needs extra data for their clock readout function. The initial
     common VDSO data structure did not provide a way to add that. It
     now has an embedded architecture specific struct embedded which
     defaults to an empty struct.

     Doing this now avoids tree dependencies and conflicts post rc1 and
     allows all other architectures which work on generic VDSO support
     to work from a common upstream base.

   - A trivial comment fix"

* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Delete repeated words in comments
  lib/vdso: Allow to add architecture-specific vdso data
  timekeeping/vsyscall: Provide vdso_update_begin/end()
  vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
2020-08-14 14:26:08 -07:00
Linus Torvalds
9ad57f6dfc Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction,
   mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util,
   memory-hotplug, cleanups, uaccess, migration, gup, pagemap),

 - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops,
   checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump,
   exec, kdump, rapidio, panic, kcov, kgdb, ipc).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
  mm/gup: remove task_struct pointer for all gup code
  mm: clean up the last pieces of page fault accountings
  mm/xtensa: use general page fault accounting
  mm/x86: use general page fault accounting
  mm/sparc64: use general page fault accounting
  mm/sparc32: use general page fault accounting
  mm/sh: use general page fault accounting
  mm/s390: use general page fault accounting
  mm/riscv: use general page fault accounting
  mm/powerpc: use general page fault accounting
  mm/parisc: use general page fault accounting
  mm/openrisc: use general page fault accounting
  mm/nios2: use general page fault accounting
  mm/nds32: use general page fault accounting
  mm/mips: use general page fault accounting
  mm/microblaze: use general page fault accounting
  mm/m68k: use general page fault accounting
  mm/ia64: use general page fault accounting
  mm/hexagon: use general page fault accounting
  mm/csky: use general page fault accounting
  ...
2020-08-12 11:24:12 -07:00
Christoph Hellwig
428e2976a5 uaccess: remove segment_eq
segment_eq is only used to implement uaccess_kernel.  Just open code
uaccess_kernel in the arch uaccess headers and remove one layer of
indirection.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Link: http://lkml.kernel.org/r/20200710135706.537715-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:58 -07:00
Linus Torvalds
952ace797c IOMMU Updates for Linux v5.9
Including:
 
 	- Removal of the dev->archdata.iommu (or similar) pointers from
 	  most architectures. Only Sparc is left, but this is private to
 	  Sparc as their drivers don't use the IOMMU-API.
 
 	- ARM-SMMU Updates from Will Deacon:
 
 	  -  Support for SMMU-500 implementation in Marvell
 	     Armada-AP806 SoC
 
 	  - Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
 
 	  - DT compatible string updates
 
 	  - Remove unused IOMMU_SYS_CACHE_ONLY flag
 
 	  - Move ARM-SMMU drivers into their own subdirectory
 
 	- Intel VT-d Updates from Lu Baolu:
 
 	  - Misc tweaks and fixes for vSVA
 
 	  - Report/response page request events
 
 	  - Cleanups
 
 	- Move the Kconfig and Makefile bits for the AMD and Intel
 	  drivers into their respective subdirectory.
 
 	- MT6779 IOMMU Support
 
 	- Support for new chipsets in the Renesas IOMMU driver
 
 	- Other misc cleanups and fixes (e.g. to improve compile test
 	  coverage)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl8ygTIACgkQK/BELZcB
 GuPZmRAAzSLuUNoQPWrFUbocNuZ/YHUCKdluKdYx26AgtYFwBrwzDAHPdq8HF8Hm
 y8w2xiUVVP9uZ8gnDkAuwXBtg+yOnG9sRNFZMNdtCy1Q0ehp0HNsn/6NabxVpSml
 QuAmd2PxMMopQRVLOR5YYvZl6JdiZx19W8X+trgwnR9Kghqq+7QXI9+D00jztRxQ
 Qvh/9NvIdX3k+5R4ZPJaV6OhaFvxzQzQZwKuO61VqFOWZRH1z9Oo+aXDCWTFUjYN
 IClTcG8qOK2W9/SOyYDXMoz30Yf0vcuDxhafi2JJVNcTPRmMWoeqff6yKslp76ea
 lTepDcIKld1Ul9NoqfYzhhKiEaLcgMEW2ua6vk5YFVxBBqJfg5qdtDZzBxa0FiNx
 TQrZFX3xjtZC6tRyy+eKWOj6vx7l0ONwwDxRc3HdvL+xE+KUdmsg82qHU4cAHRjp
 U2dgTdlkTEd56q4BEQxmJAHYMIUrx2QAp6pa2+Jv/Iqpi9PsZ2k+l9Gy6h+rM7dn
 Est/1gA4kDhKdCKfTx7g9EL6AAoU50WttxNmwMxrUrXX3fsstfY1fKgyZUPpkL7V
 V5iXbbsdMQLHzOF2qiqIIMxMGYxr/x/FJ1DnSJ7j+jAXMF77d2B9iQttzImOVN2c
 VXBxcVstWN7/xXjIy13C/83bRKwWqXaaS4cbv3Di0ZGFeD2oAF0=
 =3O2Z
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - Remove of the dev->archdata.iommu (or similar) pointers from most
   architectures. Only Sparc is left, but this is private to Sparc as
   their drivers don't use the IOMMU-API.

 - ARM-SMMU updates from Will Deacon:

     - Support for SMMU-500 implementation in Marvell Armada-AP806 SoC

     - Support for SMMU-500 implementation in NVIDIA Tegra194 SoC

     - DT compatible string updates

     - Remove unused IOMMU_SYS_CACHE_ONLY flag

     - Move ARM-SMMU drivers into their own subdirectory

 - Intel VT-d updates from Lu Baolu:

     - Misc tweaks and fixes for vSVA

     - Report/response page request events

     - Cleanups

 - Move the Kconfig and Makefile bits for the AMD and Intel drivers into
   their respective subdirectory.

 - MT6779 IOMMU Support

 - Support for new chipsets in the Renesas IOMMU driver

 - Other misc cleanups and fixes (e.g. to improve compile test coverage)

* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
  iommu/amd: Move Kconfig and Makefile bits down into amd directory
  iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
  iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
  iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
  iommu: Add gfp parameter to io_pgtable_ops->map()
  iommu: Mark __iommu_map_sg() as static
  iommu/vt-d: Rename intel-pasid.h to pasid.h
  iommu/vt-d: Add page response ops support
  iommu/vt-d: Report page request faults for guest SVA
  iommu/vt-d: Add a helper to get svm and sdev for pasid
  iommu/vt-d: Refactor device_to_iommu() helper
  iommu/vt-d: Disable multiple GPASID-dev bind
  iommu/vt-d: Warn on out-of-range invalidation address
  iommu/vt-d: Fix devTLB flush for vSVA
  iommu/vt-d: Handle non-page aligned address
  iommu/vt-d: Fix PASID devTLB invalidation
  iommu/vt-d: Remove global page support in devTLB flush
  iommu/vt-d: Enforce PASID devTLB field mask
  iommu: Make some functions static
  iommu/amd: Remove double zero check
  ...
2020-08-11 14:13:24 -07:00
Mike Rapoport
f9cb654cb5 asm-generic: pgalloc: provide generic pgd_free()
Most architectures define pgd_free() as a wrapper for free_page().

Provide a generic version in asm-generic/pgalloc.h and enable its use for
most architectures.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-7-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Mike Rapoport
1355c31eeb asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()
For most architectures that support >2 levels of page tables,
pmd_alloc_one() is a wrapper for __get_free_pages(), sometimes with
__GFP_ZERO and sometimes followed by memset(0) instead.

More elaborate versions on arm64 and x86 account memory for the user page
tables and call to pgtable_pmd_page_ctor() as the part of PMD page
initialization.

Move the arm64 version to include/asm-generic/pgalloc.h and use the
generic version on several architectures.

The pgtable_pmd_page_ctor() is a NOP when ARCH_ENABLE_SPLIT_PMD_PTLOCK is
not enabled, so there is no functional change for most architectures
except of the addition of __GFP_ACCOUNT for allocation of user page
tables.

The pmd_free() is a wrapper for free_page() in all the cases, so no
functional change here.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-5-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Mike Rapoport
ca15ca406f mm: remove unneeded includes of <asm/pgalloc.h>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"

Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table.  These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.

In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>

In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.

This patch (of 8):

In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory.  Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.

As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.

The process was somewhat automated using

	sed -i -E '/[<"]asm\/pgalloc\.h/d' \
                $(grep -L -w -f /tmp/xx \
                        $(git grep -E -l '[<"]asm/pgalloc\.h'))

where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.

[rppt@linux.ibm.com: fix powerpc warning]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Linus Torvalds
40ddad1913 ARM development for 5.9-rc1:
- add arch/arm/Kbuild from Masahiro Yamada.
 - simplify act_mm macro, since it contains an open-coded
   get_thread_info.
 - VFP updates for Clang from Stefan Agner.
 - Fix unwinder for Clang from Nathan Huckleberry.
 - Remove unused it8152 PCI host controller, used by the removed cm-x2xx
   platforms from Mike Rapoport.
 - Further explanation of __range_ok().
 - Remove kimage_voffset that isn't used anymore from Marc Zyngier.
 - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel.
 - Documentation cleanup for mach-* from Pete Zaitcev.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl8sOXMACgkQ9OeQG+St
 rGRFCBAAlBOdZmiB4/UW59LEdBRhNg4C0HNQmOxQqp6oMZLw9Whu3SDHeBePVvqA
 gp8z3rJL6N6XhSmv0dplWxgX2FrBfscjlwa7wLcwtz1NCTeGT1xL6s2dwH2q8Ocw
 swfcFhdFiJ+ewtylfYqogGPQyFXOPnTGv7B/cH+IX1kP0OcpgDb+pDy24MrrrD4r
 6DC8fIkZtDcvABJGSEthiMx29Pn1jbGAZWW3acVDtnMgppzB6brMH/A1HirMo0G9
 qGxejqJ+/DgsQciRBxfSI2N4U42XRVacW1vGdN19tFWYhHNStx9PnV9JHo61sQFM
 UiI1fARat8dlY8qT72binE1gbDZ4HOLJ5181BjDEchoO/qnxxi0tOlOlFO6PB0fz
 innRDC5TGLjBb/9B5YkHLSoDDo0erovJUV1m1pz/T9Dd6rO+1BV6Q2GI312dxLVR
 IfRJ8PVI9WZaYjZgxp14m1l0tRNI0BJoRT6QjADwAxo5leRFho6KbsfAgNCm8/ni
 lfqo3kHrLnd3pojljiuvW8/oBdqYTA86VAlfzyJ/rFOHMlROeFGCoCDqsBeqR1gZ
 pX3zQU5Jf8pJXsXaM1hXO/CcK61Nr4/m18uyjLpJeyYNJWz3CZ/hndhLJR91cShT
 hTP1bB/UQlprOP6CgjTPj1MCCA9HCRCo8k5y/s9VKpMZ8SM9Ghw=
 =RWzO
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - add arch/arm/Kbuild from Masahiro Yamada.

 - simplify act_mm macro, since it contains an open-coded
   get_thread_info.

 - VFP updates for Clang from Stefan Agner.

 - Fix unwinder for Clang from Nathan Huckleberry.

 - Remove unused it8152 PCI host controller, used by the removed cm-x2xx
   platforms from Mike Rapoport.

 - Further explanation of __range_ok().

 - Remove kimage_voffset that isn't used anymore from Marc Zyngier.

 - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel.

 - Documentation cleanup for mach-* from Pete Zaitcev.

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8996/1: Documentation/Clean up the description of mach-<class>
  ARM: 8995/1: drop Thumb-2 workaround for ancient binutils
  ARM: 8994/1: mm: drop kimage_voffset which was only used by KVM
  ARM: uaccess: add further explanation of __range_ok()
  ARM: 8993/1: remove it8152 PCI controller driver
  ARM: 8992/1: Fix unwind_frame for clang-built kernels
  ARM: 8991/1: use VFP assembler mnemonics if available
  ARM: 8990/1: use VFP assembler mnemonics in register load/store macros
  ARM: 8989/1: use .fpu assembler directives instead of assembler arguments
  ARM: 8982/1: mm: Simplify act_mm macro
  ARM: 8981/1: add arch/arm/Kbuild
2020-08-06 10:17:00 -07:00
Thomas Gleixner
4c5a116ada vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
MIPS already uses and S390 will need the vdso data pointer in
__arch_get_hw_counter().

This works nicely as long as the architecture does not support time
namespaces in the VDSO. With time namespaces enabled the regular
accessor to the vdso data pointer __arch_get_vdso_data() will return the
namespace specific VDSO data page for tasks which are part of a
non-root time namespace. This would cause the architectures which need
the vdso data pointer in __arch_get_hw_counter() to access the wrong
vdso data page.

Add a vdso_data pointer argument to __arch_get_hw_counter() and hand it in
from the call sites in the core code. For architectures which do not need
the data pointer in their counter accessor function the compiler will just
optimize it out.

Fix up all existing architecture implementations and make MIPS utilize the
pointer instead of invoking the accessor function.

No functional change and no change in the resulting object code (except
MIPS).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/draft-87wo2ekuzn.fsf@nanos.tec.linutronix.de
2020-08-06 10:57:30 +02:00
Linus Torvalds
e4cbce4d13 The main changes in this cycle were:
- Improve uclamp performance by using a static key for the fast path
 
  - Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
    better power efficiency of RT tasks on battery powered devices.
    (The default is to maximize performance & reduce RT latencies.)
 
  - Improve utime and stime tracking accuracy, which had a fixed boundary
    of error, which created larger and larger relative errors as the values
    become larger. This is now replaced with more precise arithmetics,
    using the new mul_u64_u64_div_u64() helper in math64.h.
 
  - Improve the deadline scheduler, such as making it capacity aware
 
  - Improve frequency-invariant scheduling
 
  - Misc cleanups in energy/power aware scheduling
 
  - Add sched_update_nr_running tracepoint to track changes to nr_running
 
  - Documentation additions and updates
 
  - Misc cleanups and smaller fixes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8oJDURHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1ixLg//bqWzFlfWirvngTgDxDnplwUTyKXmMCcq
 R1IYhlyK2O5FxvhbRmdmW11W3yzyTPvgCs6Q/70negGaPNe2w1OxfxiK9NMKz5eu
 M1LoXas7pL5g7Pr/ZxxHk/8VqJLV4t9MkodiiInmV6lTaznT3sU6a/kpYQjJyFnG
 Tuu9jd6JhdRKmePDJnNmUBoGQ7JiOQDcX4HtkcQ3OA+An3624tmJzbW1yts+uj7J
 ZWo2EY60RfbA9MxQXGPOaR/nAjngWs4Q6tddAh10mftsPq1gR2iFUKju1d31MQt/
 RHLdiqJf+AyUC4popKG7a+7ilCKMBwPociSreTJNPyEUQ1X4AM3vUVk4yjUoiDph
 k2WdsCF8/JRdhXg0NnrpPUqOaAbQj53EeXnitEb92E7WyTZgLOvAtpV//xZo6utp
 2QHerfrQ9SoGQjz/ho78za5vQtV1x25yDhd+X4XV4QEhIy85G9/2JCpC/Kc/TXLf
 OO7A4X69XztKTEJhP60g8ldCPUe4N2vbh1vKY6oAD8AFQVVNZ6n7375/Qa//b0/k
 ++hcYkPc2EK97/aBFdvzDgqb7aUo7Mtn2ibke16sQU4szulaoRuAHQG4jdGKMwbD
 dk2VBoxyxeYFXWHsNneSe87+ha3sd0dSN0ul1EB/SlFrVELMvy634YXnMYGW8ima
 PzyPB0ezpuA=
 =PbO7
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

 - Improve uclamp performance by using a static key for the fast path

 - Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
   better power efficiency of RT tasks on battery powered devices.
   (The default is to maximize performance & reduce RT latencies.)

 - Improve utime and stime tracking accuracy, which had a fixed boundary
   of error, which created larger and larger relative errors as the
   values become larger. This is now replaced with more precise
   arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.

 - Improve the deadline scheduler, such as making it capacity aware

 - Improve frequency-invariant scheduling

 - Misc cleanups in energy/power aware scheduling

 - Add sched_update_nr_running tracepoint to track changes to nr_running

 - Documentation additions and updates

 - Misc cleanups and smaller fixes

* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
  sched/doc: Document capacity aware scheduling
  sched: Document arch_scale_*_capacity()
  arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
  Documentation/sysctl: Document uclamp sysctl knobs
  sched/uclamp: Add a new sysctl to control RT default boost value
  sched/uclamp: Fix a deadlock when enabling uclamp static key
  sched: Remove duplicated tick_nohz_full_enabled() check
  sched: Fix a typo in a comment
  sched/uclamp: Remove unnecessary mutex_init()
  arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
  sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
  arch_topology, sched/core: Cleanup thermal pressure definition
  trace/events/sched.h: fix duplicated word
  linux/sched/mm.h: drop duplicated words in comments
  smp: Fix a potential usage of stale nr_cpus
  sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
  sched: nohz: stop passing around unused "ticks" parameter.
  sched: Better document ttwu()
  sched: Add a tracepoint to track rq->nr_running
  ...
2020-08-03 14:58:38 -07:00
Linus Torvalds
9ba19ccd2d These were the main changes in this cycle:
- LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops.
 
  - KCSAN updates: the most important change is that GCC 11 now has all fixes in place
                   to support KCSAN, so GCC support can be enabled again. Also more annotations.
 
  - futex updates: minor cleanups and simplifications
 
  - seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities.
 
  - lockdep updates:
     - simplify IRQ trace event handling
     - add various new debug checks
     - simplify header dependencies, split out <linux/lockdep_types.h>, decouple
       lockdep from other low level headers some more
     - fix NMI handling
 
  - misc cleanups and smaller fixes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8n9/wRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hZFQ//dD+AKw9Nym+WbylovmeD0qxWxPyeN/jG
 vBVDTOJIJLtZTkZf6YHcYOJlPwaMDYUQluqTPQhsaQZy/NoEb5NM2cFAj2R9gjyT
 O8665T1dvhW9Sh353mBpuwviqdrnvCeHTBEcglSlFY7hxToYAflUN0+DXGVtNys8
 PFNf3L9SHT0GLVC8+di/eJzQaRqxiB0Pq7kvh2RvPJM/dcQNA9Ho3CCNO5j6qGoY
 u7OnMT8xJXkgbdjjUO4RO0v9VjMuNthZ2JiONDgvgKtJfIL2wt5YXIv1EYX0GuWp
 WZgIzE4o1G7GJOOzKpFfZFyK8grHu2fWgK1plvodWjlLkBmltJZ1qyOM+wngd/m2
 TgtPo73/YFbxFUbbBpkb0eiIaH2t99kMvfCWd05+GiPCtzn9UL9GfFRWd42vonwc
 sQWjFrHKlnuzifUfNcLmKg7R2nUtF3Dm/SydiTJ+9NtH/QA17YJKWnlE1moulNtQ
 p7H7+8UdcvSQ7F38A74v2IYNIyDsv5qcE8ar4QHdaanBBX/LCyD0UlfgsgxEReXf
 GDKkpx7LFQlI6Y2YB+dZgkCwhNBl3/OQ3v6hC95B37fA67dAIQyPIWHiHbaM+029
 gghqU4GcUcbjSnHPzl9PPL+hi9MyXrMjpb7CBXytg4NI4EE1waHR+0kX14V8ndRj
 MkWQOKPUgB0=
 =3MTT
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:

 - LKMM updates: mostly documentation changes, but also some new litmus
   tests for atomic ops.

 - KCSAN updates: the most important change is that GCC 11 now has all
   fixes in place to support KCSAN, so GCC support can be enabled again.
   Also more annotations.

 - futex updates: minor cleanups and simplifications

 - seqlock updates: merge preparatory changes/cleanups for the
   'associated locks' facilities.

 - lockdep updates:
    - simplify IRQ trace event handling
    - add various new debug checks
    - simplify header dependencies, split out <linux/lockdep_types.h>,
      decouple lockdep from other low level headers some more
    - fix NMI handling

 - misc cleanups and smaller fixes

* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  kcsan: Improve IRQ state trace reporting
  lockdep: Refactor IRQ trace events fields into struct
  seqlock: lockdep assert non-preemptibility on seqcount_t write
  lockdep: Add preemption enabled/disabled assertion APIs
  seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
  seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
  seqlock: Reorder seqcount_t and seqlock_t API definitions
  seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
  seqlock: Properly format kernel-doc code samples
  Documentation: locking: Describe seqlock design and usage
  locking/qspinlock: Do not include atomic.h from qspinlock_types.h
  locking/atomic: Move ATOMIC_INIT into linux/types.h
  lockdep: Move list.h inclusion into lockdep.h
  locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
  futex: Remove unused or redundant includes
  futex: Consistently use fshared as boolean
  futex: Remove needless goto's
  futex: Remove put_futex_key()
  rwsem: fix commas in initialisation
  docs: locking: Replace HTTP links with HTTPS ones
  ...
2020-08-03 14:39:35 -07:00
Linus Torvalds
145ff1ec09 arm64 and cross-arch updates for 5.9:
- Removal of the tremendously unpopular read_barrier_depends() barrier,
   which is a NOP on all architectures apart from Alpha, in favour of
   allowing architectures to override READ_ONCE() and do whatever dance
   they need to do to ensure address dependencies provide LOAD ->
   LOAD/STORE ordering. This work also offers a potential solution if
   compilers are shown to convert LOAD -> LOAD address dependencies into
   control dependencies (e.g. under LTO), as weakly ordered architectures
   will effectively be able to upgrade READ_ONCE() to smp_load_acquire().
   The latter case is not used yet, but will be discussed further at LPC.
 
 - Make the MSI/IOMMU input/output ID translation PCI agnostic, augment
   the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
   bus-specific parameter and apply the resulting changes to the device
   ID space provided by the Freescale FSL bus.
 
 - arm64 support for TLBI range operations and translation table level
   hints (part of the ARMv8.4 architecture version).
 
 - Time namespace support for arm64.
 
 - Export the virtual and physical address sizes in vmcoreinfo for
   makedumpfile and crash utilities.
 
 - CPU feature handling cleanups and checks for programmer errors
   (overlapping bit-fields).
 
 - ACPI updates for arm64: disallow AML accesses to EFI code regions and
   kernel memory.
 
 - perf updates for arm64.
 
 - Miscellaneous fixes and cleanups, most notably PLT counting
   optimisation for module loading, recordmcount fix to ignore
   relocations other than R_AARCH64_CALL26, CMA areas reserved for
   gigantic pages on 16K and 64K configurations.
 
 - Trivial typos, duplicate words.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl8oTcsACgkQa9axLQDI
 XvEj6hAAkn39mO5xrR/Vhpg3DyFPk63ZlMSX9SsOeVyaLbovT6stTs1XAZXPpnkt
 rV3gwACyGSrqH6+uey9pHgHJuPF2TdrGEVK08yVKo9KGW/6yXSIncdKFE4jUJ/WJ
 wF5j7eMET2aGzcpm5AlzMmq6HOrKB8nZac9H8/x6H+Ox2WdgJkEjOkDvyqACUyum
 N3FsTZkWj2pIkTXHNgDZ8KjxVLO8HlFaB2hkxFDl9NPlX2UTCQJ8Tg1KiPLafKaK
 gUvH4usQDFdb5RU/UWogre37J4emO0ZTApZOyju+U+PMMWlWVHjZ4isUIS9zz/AE
 JNZ23dnKZX2HrYa5p8HZx175zwj/vXUqUHCZPLvQXaAudCEhF8BVljPiG0e80FV5
 GHFUgUbylKspp01I/9L+2JvsG96Mr0e+P3Sx7L2HTI42cmtoSa14+MpoSRj7zlft
 Qcl8hfrVOjCjUnFRHa/1y1cGvnD9GbgnKJR7zgVxl9bD/Jd48r1HUtwRORZCzWFr
 mRPVbPS72fWxMzMV9DZYJm02jJY9kLX2BMl49njbB8MhAhzOvrMVzoVVtMMeRFLR
 XHeJpmg36W09FiRGe7LRXlkXIhCQzQG2bJfiphuupCfhjRAitPoq8I925G6Pig60
 c8RWaXGU7PrEsdMNrL83vekvGKgqrkoFkRVtsCoQ2X6Hvu/XdYI=
 =mh79
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 and cross-arch updates from Catalin Marinas:
 "Here's a slightly wider-spread set of updates for 5.9.

  Going outside the usual arch/arm64/ area is the removal of
  read_barrier_depends() series from Will and the MSI/IOMMU ID
  translation series from Lorenzo.

  The notable arm64 updates include ARMv8.4 TLBI range operations and
  translation level hint, time namespace support, and perf.

  Summary:

   - Removal of the tremendously unpopular read_barrier_depends()
     barrier, which is a NOP on all architectures apart from Alpha, in
     favour of allowing architectures to override READ_ONCE() and do
     whatever dance they need to do to ensure address dependencies
     provide LOAD -> LOAD/STORE ordering.

     This work also offers a potential solution if compilers are shown
     to convert LOAD -> LOAD address dependencies into control
     dependencies (e.g. under LTO), as weakly ordered architectures will
     effectively be able to upgrade READ_ONCE() to smp_load_acquire().
     The latter case is not used yet, but will be discussed further at
     LPC.

   - Make the MSI/IOMMU input/output ID translation PCI agnostic,
     augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
     bus-specific parameter and apply the resulting changes to the
     device ID space provided by the Freescale FSL bus.

   - arm64 support for TLBI range operations and translation table level
     hints (part of the ARMv8.4 architecture version).

   - Time namespace support for arm64.

   - Export the virtual and physical address sizes in vmcoreinfo for
     makedumpfile and crash utilities.

   - CPU feature handling cleanups and checks for programmer errors
     (overlapping bit-fields).

   - ACPI updates for arm64: disallow AML accesses to EFI code regions
     and kernel memory.

   - perf updates for arm64.

   - Miscellaneous fixes and cleanups, most notably PLT counting
     optimisation for module loading, recordmcount fix to ignore
     relocations other than R_AARCH64_CALL26, CMA areas reserved for
     gigantic pages on 16K and 64K configurations.

   - Trivial typos, duplicate words"

Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
  arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
  arm64/mm: save memory access in check_and_switch_context() fast switch path
  arm64: sigcontext.h: delete duplicated word
  arm64: ptrace.h: delete duplicated word
  arm64: pgtable-hwdef.h: delete duplicated words
  bus: fsl-mc: Add ACPI support for fsl-mc
  bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
  of/irq: Make of_msi_map_rid() PCI bus agnostic
  of/irq: make of_msi_map_get_device_domain() bus agnostic
  dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
  of/device: Add input id to of_dma_configure()
  of/iommu: Make of_map_rid() PCI agnostic
  ACPI/IORT: Add an input ID to acpi_dma_configure()
  ACPI/IORT: Remove useless PCI bus walk
  ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
  ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
  ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
  arm64: enable time namespace support
  arm64/vdso: Restrict splitting VVAR VMA
  arm64/vdso: Handle faults on timens page
  ...
2020-08-03 14:11:08 -07:00
Grygorii Strashko
aa54ea903a ARM: percpu.h: fix build error
Fix build error for the case:
  defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)

config: keystone_defconfig

  CC      arch/arm/kernel/signal.o
  In file included from ../include/linux/random.h:14,
                    from ../arch/arm/kernel/signal.c:8:
  ../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
  ../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
      : "Q" (*(const unsigned long *)current_stack_pointer));
                                     ^~~~~~~~~~~~~~~~~~~~~
                                     user_stack_pointer

Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-30 13:01:04 -07:00
Peter Zijlstra
f05d67179d Merge branch 'locking/header' 2020-07-29 16:14:21 +02:00
Herbert Xu
7ca8cf5347 locking/atomic: Move ATOMIC_INIT into linux/types.h
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h.
This allows users of atomic_t to use ATOMIC_INIT without having to
include atomic.h as that way may lead to header loops.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au
2020-07-29 16:14:18 +02:00
Russell King
2350ebe2c4 ARM: uaccess: add further explanation of __range_ok()
Detail the success return condition, and that we rely on KERNEL_DS
being zero for this to operate correctly.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-07-22 09:50:55 +01:00
Valentin Schneider
25980c7a79 arch_topology, sched/core: Cleanup thermal pressure definition
The following commit:

  14533a16c4 ("thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code")

moved the definition of arch_set_thermal_pressure() to sched/core.c, but
kept its declaration in linux/arch_topology.h. When building e.g. an x86
kernel with CONFIG_SCHED_THERMAL_PRESSURE=y, cpufreq_cooling.c ends up
getting the declaration of arch_set_thermal_pressure() from
include/linux/arch_topology.h, which is somewhat awkward.

On top of this, sched/core.c unconditionally defines
o The thermal_pressure percpu variable
o arch_set_thermal_pressure()

while arch_scale_thermal_pressure() does nothing unless redefined by the
architecture.

arch_*() functions are meant to be defined by architectures, so revert the
aforementioned commit and re-implement it in a way that keeps
arch_set_thermal_pressure() architecture-definable, and doesn't define the
thermal pressure percpu variable for kernels that don't need
it (CONFIG_SCHED_THERMAL_PRESSURE=n).

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200712165917.9168-2-valentin.schneider@arm.com
2020-07-22 10:22:05 +02:00
Mike Rapoport
6da5238fa3 ARM: 8993/1: remove it8152 PCI controller driver
The it8152 PCI host controller was only used by cm-x2xx platforms.
Since these platforms were removed, there is no point to keep it8152
driver.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-07-21 16:33:41 +01:00
Stefan Agner
2cbd1cc3dc ARM: 8991/1: use VFP assembler mnemonics if available
The integrated assembler of Clang 10 and earlier do not allow to access
the VFP registers through the coprocessor load/store instructions:
arch/arm/vfp/vfpmodule.c:342:2: error: invalid operand for instruction
        fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK));
        ^
arch/arm/vfp/vfpinstr.h:79:6: note: expanded from macro 'fmxr'
        asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr   " #_vfp_ ", %0"
            ^
<inline asm>:1:6: note: instantiated into assembly here
        mcr p10, 7, r0, cr8, cr0, 0 @ fmxr      FPEXC, r0
            ^

This has been addressed with Clang 11 [0]. However, to support earlier
versions of Clang and for better readability use of VFP assembler
mnemonics still is preferred.

Ideally we would replace this code with the unified assembler language
mnemonics vmrs/vmsr on call sites along with .fpu assembler directives.
The GNU assembler supports the .fpu directive at least since 2.17 (when
documentation has been added). Since Linux requires binutils 2.21 it is
safe to use .fpu directive. However, binutils does not allow to use
FPINST or FPINST2 as an argument to vmrs/vmsr instructions up to
binutils 2.24 (see binutils commit 16d02dc907c5):
arch/arm/vfp/vfphw.S: Assembler messages:
arch/arm/vfp/vfphw.S:162: Error: operand 0 must be FPSID or FPSCR pr FPEXC -- `vmsr FPINST,r6'
arch/arm/vfp/vfphw.S:165: Error: operand 0 must be FPSID or FPSCR pr FPEXC -- `vmsr FPINST2,r8'
arch/arm/vfp/vfphw.S:235: Error: operand 1 must be a VFP extension System Register -- `vmrs r3,FPINST'
arch/arm/vfp/vfphw.S:238: Error: operand 1 must be a VFP extension System Register -- `vmrs r12,FPINST2'

Use as-instr in Kconfig to check if FPINST/FPINST2 can be used. If they
can be used make use of .fpu directives and UAL VFP mnemonics for
register access.

This allows to build vfpmodule.c with Clang and its integrated assembler.

[0] https://reviews.llvm.org/D59733

Link: https://github.com/ClangBuiltLinux/linux/issues/905

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-07-21 16:33:39 +01:00
Stefan Agner
ee440336e5 ARM: 8990/1: use VFP assembler mnemonics in register load/store macros
The integrated assembler of Clang 10 and earlier do not allow to access
the VFP registers through the coprocessor load/store instructions:
<instantiation>:4:6: error: invalid operand for instruction
 LDC p11, cr0, [r10],#32*4 @ FLDMIAD r10!, {d0-d15}
     ^

This has been addressed with Clang 11 [0]. However, to support earlier
versions of Clang and for better readability use of VFP assembler
mnemonics still is preferred.

Replace the coprocessor load/store instructions with explicit assembler
mnemonics to accessing the floating point coprocessor registers. Use
assembler directives to select the appropriate FPU version.

This allows to build these macros with GNU assembler as well as with
Clang's built-in assembler.

[0] https://reviews.llvm.org/D59733

Link: https://github.com/ClangBuiltLinux/linux/issues/905

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-07-21 16:33:38 +01:00
Will Deacon
002dff36ac asm/rwonce: Don't pull <asm/barrier.h> into 'asm-generic/rwonce.h'
Now that 'smp_read_barrier_depends()' has gone the way of the Norwegian
Blue, drop the inclusion of <asm/barrier.h> in 'asm-generic/rwonce.h'.

This requires fixups to some architecture vdso headers which were
previously relying on 'asm/barrier.h' coming in via 'linux/compiler.h'.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Will Deacon <will@kernel.org>
2020-07-21 10:50:36 +01:00
Peter Zijlstra
a634291588 arm: Break cyclic percpu include
In order to use <asm/percpu.h> in irqflags.h, we need to make sure
asm/percpu.h does not itself depend on irqflags.h.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200623083721.454517573@infradead.org
2020-07-10 12:00:02 +02:00
Joerg Roedel
fb0fd5f70c arm: Remove dev->archdata.iommu pointer
There are no users left, all drivers have been converted to use the
per-device private pointer offered by IOMMU core.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200625130836.1916-12-joro@8bytes.org
2020-06-30 11:59:48 +02:00
Ard Biesheuvel
2a55280a36 efi/libstub: arm: Print CPU boot mode and MMU state at boot
On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.

So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,

  EFI stub: Entering in SVC mode with MMU enabled

Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:

  efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
  efi: CPSR at EFI stub entry        : 0x600001d3
  efi: SCTLR at EFI stub entry       : 0x00c51838
  efi: CPSR after ExitBootServices() : 0x600001d3
  efi: SCTLR after ExitBootServices(): 0x00c50838

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-06-17 15:29:11 +02:00
Mike Rapoport
974b9b2c68 mm: consolidate pte_index() and pte_offset_*() definitions
All architectures define pte_index() as

	(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)

and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().

For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.

Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.

The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.

The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().

[rppt@linux.ibm.com: v2]
  Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update]
  Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update]
  Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build]
  Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Mike Rapoport
65fddcfca8 mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s <file> <header>" % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include <linux/%s>" % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include <linux/"):
		    in_hdrs = True
		elif not moved and in_hdrs:
		    moved = True
		    print hdr_to_move
		print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport
ca5999fde0 mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Dmitry Safonov
e8d7b73532 arm: add loglvl to unwind_backtrace()
Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level argument to unwind_backtrace() as a preparation for
introducing show_stack_loglvl().

As a good side-effect arm_syscall() is now printing errors with the same
log level as the backtrace.

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-6-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:10 -07:00
Dmitry Safonov
5489ab50c2 arm/asm: add loglvl to c_backtrace()
Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level argument to c_backtrace() as a preparation for introducing
show_stack_loglvl().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-5-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:10 -07:00
Christoph Hellwig
fca7f8e6fd arm: rename flush_cache_user_range to flush_icache_user_range
flush_icache_user_range will be the name for a generic primitive.  Move
the arm name so that arm already has an implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: http://lkml.kernel.org/r/20200515143646.3857579-24-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08 11:05:58 -07:00
Christoph Hellwig
97f52c1536 arm,sparc,unicore32: remove flush_icache_user_range
flush_icache_user_range is only used by <asm-generic/cacheflush.h>, so
remove it from the architectures that implement it, but don't use
<asm-generic/cacheflush.h>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Link: http://lkml.kernel.org/r/20200515143646.3857579-19-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08 11:05:57 -07:00