DT currently lists the port mode for the 88E6352 switch 1 to 88E6185
switch 2 as "rgmii-id" but referring to the schematics, it is in fact
a serdes link. The 88E6352 is configured with P5_MODE=6, S_SEL=1 and
S_MODE=1, which means port 5 is configured as 1000BASE-X.
This is confirmed by the value in the 88E6352 port 5 status register,
0x4e09, where C_MODE=9 meaning 1000BASE-X. It is also confirmed by
the 88E6185 port 9 status register, 0x5e8c, where C_MODE=4 meaning
cross-chip SERDES mode is selected.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to not apply delays
in any direction (mostly because the SJA1105T can't do that, so this
board uses PCB traces). To preserve that but also silence the driver,
use explicit delays of 0 ns. The delay information from the phy-mode is
ignored by new kernels (it's still RGMII as long as it's "rgmii*"
something), and the explicit {rx,tx}-internal-delay-ps properties are
ignored by old kernels, so the change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to apply both RX and
TX delays. To preserve that, add explicit 2 nanosecond delays, which are
identical with what the driver used to add (a 90 degree phase shift).
The delays from the phy-mode are ignored by new kernels (it's still
RGMII as long as it's "rgmii*" something), and the explicit
{rx,tx}-internal-delay-ps properties are ignored by old kernels, so the
change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add SPI NOR partition for uefi.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211019060155.945-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This commit adds configuration i2c busses for 24 NVMe slots and
2 M2 NVMe slots found on Mt.Jade hardware reference platform
with Ampere's Altra processor family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211019060155.945-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This change updates the configuration for the nct7802 hardware
monitor to correctly configure its temperature sensors.
Signed-off-by: Oskar Senft <osk@google.com>
Link: https://lore.kernel.org/r/20211105032910.446492-1-osk@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The PCIe host bridge has two interrupt lines, one that goes towards it
PCIE_INTR2 second level interrupt controller and one for its MSI second
level interrupt controller. The first interrupt line is not currently
managed by the driver, which is why it was not a functional problem.
The interrupt-map property was also only listing the PCI_INTA interrupts
when there are also the INTB, C and D.
Reported-by: Jim Quinlan <jim2101024@gmail.com>
Fixes: d5c8dc0d4c ("ARM: dts: bcm2711: Enable PCIe controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The GPIO controller is also an interrupt controller provider and is
currently missing the appropriate 'interrupt-controller' and
'#interrupt-cells' properties to denote that.
Fixes: fb026d3de3 ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The I2C interrupt controller line is off by 32 because the datasheet
describes interrupt inputs into the GIC which are for Shared Peripheral
Interrupts and are starting at offset 32. The ARM GIC binding expects
the SPI interrupts to be numbered from 0 relative to the SPI base.
Fixes: bb097e3e00 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This describes CRU in a way matching documentation and fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: cru@100: $nodename:0: 'cru@100' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /lib/python3.6/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
replaces the bit-banged i2c-gpio provided i2c functionality
with the hardware in the SoC.
During review of the MR32, Florian Fainelli pointed out that the
SoC has a real I2C-controller. Furthermore, the connected pins
(SDA and SCL) would line up perfectly for use. Back then I couldn't
get it working though and I left it with i2c-gpio (which worked).
Now we know the reason: the interrupt was incorrectly specified.
(Hence, this patch depends on Florian Fainelli's
"ARM: dts: BCM5301X: Fix I2C controller interrupt" patch).
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Define the Realtek RTL8365MB switch without interrupt support on the device
tree of Asus RT-AC88U.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Remove the unnecessary #address-cells & #size-cells in the gpio-keys node
from the device tree of Asus RT-AC88U.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch enables two properties for the QCA8337 switches on the MX65.
Set the SGMII transmit clock to falling edge
"qca,sgmii-txclk-falling-edge" to conform to the OEM configuration [1].
The new explicit PLL enable option "qca,sgmii-enable-pll" is required
[2].
[1] https://git.kernel.org/netdev/net-next/c/6c43809bf1be
[2] https://git.kernel.org/netdev/net-next/c/bbc4799e8bb6
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add rudimentary support for the Fairphone 1, based on MT6589 to boot to
UART console.
The recently added SMP support needs to be disabled for this board as
the kernel panics executing /init with it, even though the CPUs seem to
start up fine - maybe a stability issue.
[ 0.072010] smp: Bringing up secondary CPUs ...
[ 0.131888] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.191889] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.251890] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.251982] smp: Brought up 1 node, 4 CPUs
[ 0.254745] SMP: Total of 4 processors activated (7982.28 BogoMIPS).
[ 0.255582] CPU: All CPU(s) started in SVC mode.
[ 0.472039] Run /init as init process
[ 0.473317] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211024084535.30959-1-luca@z3ntu.xyz
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Switch away from using the deprecated 'host-wakeup-gpios' property,
and use a 'host-wakeup' interrupt instead, as suggested by the binding
documentation.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211031234137.87070-2-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The reset GPIO was marked active-high, which is against what's specified
in the documentation. Mark the reset GPIO as active-low. With this
change, Bluetooth can now be used on the i9100.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211031234137.87070-1-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
make dtbs_check:
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dt.yaml: ov5640@3c: 'AVDD-supply' is a required property
From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dt.yaml: ov5640@3c: 'DVDD-supply' is a required property
From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dt.yaml: ov5640@3c: 'DOVDD-supply' is a required property
From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
Fix this by describing the missing regulators.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/300149c730931914b77e17df6bcce89b67c3005f.1634222546.git.geert+renesas@glider.be
Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPaPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3wCghhRCsLl5axOKdbkJO2ZUApR71DwAn2Vjwo2Y
Jgo6v3bVWWhL43YwCkf6
=UNgI
-----END PGP SIGNATURE-----
Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb: gadget: f_mass_storage: Disable eps during disconnect
usb: gadget: udc: core: Revise comments for USB ep enable/disable
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: iowarrior: fix control-message timeouts
Documentation: USB: fix example bulk-message timeout
usb: dwc2: stm32mp15: set otg_rev
usb: dwc2: add otg_rev and otg_caps information for gadget driver
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
usb:gadget: f_uac1: fixed sync playback
Docs: usb: remove :c:func: for usb_register and usb_deregister
Docs: usb: update struct usb_driver
usb: gadget: configfs: change config attributes file operation
usb: gadget: configfs: add cfg_to_gadget_info() helper
usb: dwc3: Align DWC3_EP_* flag macros
...
This is a rather large update for the ARM devicetree files, after a few
quieter releases, with 775 total commits and 47 branches pulled into
this one. There are 5 new SoC types plus some minor variations, and
a total of 60 new machines, so I'm limiting the summary to the main
noteworthy items:
- Apple M1 gain support for PCI and pinctrl, getting a bit
closer to a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as
well as SM7225, 11 new smartphones, and three additional
Chromebooks, and improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version
of their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a
number of improvements for the recently added SAMA7 family.
The LAN966 SoC that was added in the platform code does not
have dts files yet. Two board files are added for the older
at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600
as BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new
development boards using RK3328/RK3399/RK3566, and one
Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the
new MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based
ebook readers, and three additional development boards, which
is notably less than their usual additions, but they also gain
improvements to their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with
a reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many
updates for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi
boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for
more hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub
home automation controllers, along with changes to other
machines
- Rob Herring continues his work on fixing dtc warnings all over
the tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc
-----BEGIN PGP SIGNATURE-----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=jp4P
-----END PGP SIGNATURE-----
Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089,
tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards,
and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
-----BEGIN PGP SIGNATURE-----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=dQa6
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
The end goal of the current buffer overflow detection work[0] is to gain
full compile-time and run-time coverage of all detectable buffer overflows
seen via array indexing or memcpy(), memmove(), and memset(). The str*()
family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this series
contains the foundational elements of several related buffer overflow
detection improvements by providing new common helpers and FORTIFY_SOURCE
changes needed to gain the introspection required for compiler visibility
into array sizes. Also included are a handful of already Acked instances
using the helpers (or related clean-ups), with many more waiting at the
ready to be taken via subsystem-specific trees[2]. The new helpers are:
- struct_group() for gaining struct member range introspection.
- memset_after() and memset_startat() for clearing to the end of structures.
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs.
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage under
GCC, and to prepare to fix the currently broken Clang support. Finishing
this work is part of the larger series[0], but depends on all the false
positives and buffer overflow bug fixes to have landed already and those
that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time
and run-time tests are added for FORTIFY_SOURCE and the mem*()-family
functions respectively. The compile time tests have found a legitimate
(though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage that
result in no known object code differences.
After this series (and the changes that have now landed via netdev
and usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds. However, due corner cases in
GCC[3] and Clang[4], I have not included the last two patches that turn
on these options, as I don't want to introduce any known warnings to
the build. Hopefully these can be solved soon.
[0] https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE
[2] https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/
[3] https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/
[4] https://bugs.llvm.org/show_bug.cgi?id=51682
[5] https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/
[6] https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/
-----BEGIN PGP SIGNATURE-----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=9xbT
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
One last set of small fixes for the soc tree:
- Incorrect ethernet phy settings found on i.mx and
allwinner platforms
- a revert for a Qualcomm DT change that caused a boot
regression
- four patches for incorrect settings in i.MX DT files
- new MAINTAINER file entries for dhcom boards
- a Kconfig fix for a reset driver that became unselectable
- three more code changes for bugs in reset drivers
-----BEGIN PGP SIGNATURE-----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=EB7G
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of small fixes for the soc tree:
- Incorrect ethernet phy settings found on i.mx and allwinner
platforms
- a revert for a Qualcomm DT change that caused a boot regression
- four patches for incorrect settings in i.MX DT files
- new MAINTAINER file entries for dhcom boards
- a Kconfig fix for a reset driver that became unselectable
- three more code changes for bugs in reset drivers"
* tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1
Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct
reset: socfpga: add empty driver allowing consumers to probe
reset: tegra-bpmp: Handle errors in BPMP response
reset: pistachio: Re-enable driver selection
reset: brcmstb-rescal: fix incorrect polarity of status bit
ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
The RPM and RPMh sleep stats are introduced on a number of platforms, to
aid the enablement of entering low power mode.
The MSM8916 support receives some polishing touches, followed by
introduction of the necessary pieces to use the DeviceTree on 32-bit
variants of the MSM8916 platform, in particular to boot the secondary
CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition
is introduced.
The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support.
MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5
gained a description of its LCD panel.
The Trogdor device on SC7180 gained support for a second source eDP
brigde, while SC7280 gains PCIe support and the newly introduced
Herobrine device.
Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour
of the newly introduced support for specifying the compatible directly
on the reserved-memory node.
The SM7225 platform is introduced, as a derrivative of SM6350, initial
support for the PM6350 PMIC and based on this the Fairphone 4 is
introduced.
The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs
to be baked into a single boot.img that can be booted on both devices.
As the GDSC driver has been extended to properly describe the
relationship between MMCX and MDSS_GDSC, the now deprecated mmcx
regulator is removed from SM8250.
SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was
also added for SM8150 and the SA8155p ADP got a couple of remoteprocs
enabled.
Additionally a number of DT validation issues was corrected across the
various platforms and devices.
-----BEGIN PGP SIGNATURE-----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=fQI7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OHZ9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS additional patches for v5.16
The RPM and RPMh sleep stats are introduced on a number of platforms, to
aid the enablement of entering low power mode.
The MSM8916 support receives some polishing touches, followed by
introduction of the necessary pieces to use the DeviceTree on 32-bit
variants of the MSM8916 platform, in particular to boot the secondary
CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition
is introduced.
The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support.
MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5
gained a description of its LCD panel.
The Trogdor device on SC7180 gained support for a second source eDP
brigde, while SC7280 gains PCIe support and the newly introduced
Herobrine device.
Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour
of the newly introduced support for specifying the compatible directly
on the reserved-memory node.
The SM7225 platform is introduced, as a derrivative of SM6350, initial
support for the PM6350 PMIC and based on this the Fairphone 4 is
introduced.
The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs
to be baked into a single boot.img that can be booted on both devices.
As the GDSC driver has been extended to properly describe the
relationship between MMCX and MDSS_GDSC, the now deprecated mmcx
regulator is removed from SM8250.
SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was
also added for SM8150 and the SA8155p ADP got a couple of remoteprocs
enabled.
Additionally a number of DT validation issues was corrected across the
various platforms and devices.
* tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits)
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock
arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine
arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: sdm630: Add disabled Venus support
arm64: dts: qcom: pm660l: Remove board-specific WLED configuration
arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone
arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings
arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add DT nodes for TCB and RTC blocks on SAMA7G5
- Add TCB0 for clocksource and clockevent functionality fallback only in
case PIT64B will fail to probe and as a testbed for this feature on
the Evaluation Kit.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYXbbIgAKCRAfOrpwrNPN
DP+LAQDaz1XM5X4rKy5epgcUu9DYEB8327Qat11UsvYIdKV6cQEA/Pgf4fTBe6fe
rJWvUXK0cNbR9DJeg4ZQe0r3ZFhdJA4=
=NCJT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=0nEh
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT #2 for 5.16:
- Add DT nodes for TCB and RTC blocks on SAMA7G5
- Add TCB0 for clocksource and clockevent functionality fallback only in
case PIT64B will fail to probe and as a testbed for this feature on
the Evaluation Kit.
* tag 'at91-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5-ek: use blocks 0 and 1 of TCB0 as cs and ce
ARM: dts: at91: sama7g5: add tcb nodes
ARM: dts: at91: sama7g5: add rtc node
Link: https://lore.kernel.org/r/20211025163428.26285-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a 'reg' entry for ICST clock nodes on the Arm Ltd platforms. The 'reg'
entry is the VCO register address. With this, the node name can be updated
to use a generic node name, 'clock-controller', and a unit-address.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211024232239.211822-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms.
The 'reg' entry is the LED control register address. With this, the node
name can be updated to use a generic node name, 'led', and a
unit-address.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211024232003.211484-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix clang-related relocation warning in futex code
- Fix incorrect use of get_kernel_nofault()
- Fix bad code generation in __get_user_check() when kasan is enabled
- Ensure TLB function table is correctly aligned
- Remove duplicated string function definitions in decompressor
- Fix link-time orphan section warnings
- Fix old-style function prototype for arch_init_kprobes()
- Only warn about XIP address when not compile testing
- Handle BE32 big endian for keystone2 remapping
-----BEGIN PGP SIGNATURE-----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=cxhy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- Fix clang-related relocation warning in futex code
- Fix incorrect use of get_kernel_nofault()
- Fix bad code generation in __get_user_check() when kasan is enabled
- Ensure TLB function table is correctly aligned
- Remove duplicated string function definitions in decompressor
- Fix link-time orphan section warnings
- Fix old-style function prototype for arch_init_kprobes()
- Only warn about XIP address when not compile testing
- Handle BE32 big endian for keystone2 remapping
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S
ARM: 9141/1: only warn about XIP address when not compile testing
ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype
ARM: 9138/1: fix link warning with XIP + frame-pointer
ARM: 9134/1: remove duplicate memcpy() definition
ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned
ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images
ARM: 9125/1: fix incorrect use of get_kernel_nofault()
ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
Rename thermal zones according to dt-schema.
Fix warnings like:
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml: thermal-zones: 'cpu-thermal0', 'cpu-thermal1', 'cpu-thermal2', 'cpu-thermal3' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020180002.195467-1-david@ixit.cz
rename node to comply with dt-schema
Fix warning:
arch/arm/boot/dts/qcom-ipq8064-rb3011.dt.yaml: s25fl016k@0: $nodename:0: 's25fl016k@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020204145.235050-1-david@ixit.cz
MMC nodes has to be named mmc@ to comply with dt-bindings.
Fix warnings as:
arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml: sdcc@12400000: $nodename:0: 'sdcc@12400000' does not match '^mmc(@.*)?$'
From schema: Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020201440.229196-1-david@ixit.cz
Fixes warnings regarding to memory and mdio nodes and
apply new naming following dt-schema.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz
Version dk01.1-c1 didn't have compatible specified, which was
causing dt-schema validation warnings.
Remove duplicated and useless board compatible from dtsi between board and device.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211009193102.76852-2-david@ixit.cz
In order to avoid having prefixes for multiple internal divisions of LG
use the "lg" prefix instead of "lge".
Fixes: ad3f04b7be ("ARM: dts: qcom: Add support for LG G Watch R")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928203815.77175-2-luca@z3ntu.xyz
'#clock-cells' is a required property of QMP PHY child node, not itself.
Drop it to fix the dtbs_check warnings below.
qcom-sdx55-t55.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
qcom-sdx55-mtp.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
qcom-sdx55-telit-fn980-tlb.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-11-shawn.guo@linaro.org
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64
tree together with the ARM32 include to allow booting this device on ARM32.
The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-15-stephan@gerhold.net
Add a special device tree include for MSM8916 on ARM32 that sets up
SMP and cpuidle without PSCI. This is meant for devices with signed
firmware that does not support PSCI and only allows booting ARM32 kernels.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-14-stephan@gerhold.net
Specify unit address for the memory node, to match the reg.
Signed-off-by: David Heidelberg <david@ixit.cz>
[bjorn: Rewrote commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020234431.298310-1-david@ixit.cz
The spear13xx PCI 'interrupt-map' property is not parse-able.
'#interrupt-cells' is missing and there are 3 #address-cells. Based on the
driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map'
is not needed.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211022141156.2592221-1-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use blocks 0 and 1 of TCB0 for clocksource and clockevent functionality.
PIT64B is already enabled on SAMA7G5 targets for this but TCB0 will be
used as a fallback only in case PIT64B will fail to probe.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211020094656.3343242-4-claudiu.beznea@microchip.com
Add RTC node.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[claudiu.beznea: add sama7g5 compatible as the IP has 2 extra registers
compared with sam9x60]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211020094656.3343242-2-claudiu.beznea@microchip.com
Add LPC uart routing to the device tree for Aspeed SoCs.
Signed-off-by: Oskar Senft <osk@google.com>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Link: https://lore.kernel.org/r/20210927023053.6728-6-chiawei_wang@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Rainier was missed when enabling all of the other machines in
commit 239566b032 ("ARM: dts: aspeed: Set earlycon boot argument").
Signed-off-by: Joel Stanley <joel@jms.id.au>
These were meant to be part of commit 4fb27b3f91 ("ARM: dts: aspeed:
rainier: Add system LEDs") but went missing.
Signed-off-by: Joel Stanley <joel@jms.id.au>
The state of this GPIO determines whether a factory reset has been
requested. If a physical switch is used, it can be high or low. During boot,
the software checks and records the state of this switch. If it is different
than the previous recorded state, then the read-write portions of memory are
reformatted.
Signed-off-by: Isaac Kurth <isaac.kurth@ibm.com>
Reviewed-by: Adriana Kobylak <anoo@us.ibm.com>
Link: https://lore.kernel.org/r/20210714214741.1547052-1-blisaac91@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Remove the gpio-keys entries for the power supply presence lines from
the Rainier device tree. The user space applications are going to change
from using libevdev to libgpiod.
Signed-off-by: B. J. Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210623230401.3050076-1-bjwyman@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Only the pass 1 Ingraham board (Rainier system) had a micro-controller
wired to GPIOP7 on ball Y23. Pass 2 boards have this ball wired to the
heartbeat LED, so remove the hog as this device tree supports pass 2.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210915214738.34382-5-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The MCTP LPC driver was loaded by hacking up the compatible in the
devicetree node for KCS 4. With the introduction of the raw KCS driver
this hack is no-longer required. Use the regular compatible string for
KCS 4 and configure the appropriate SerIRQ.
The reset state of the status bits on KCS 4 is inappropriate for the
MCTP LPC binding. Switch to KCS 3 which has a different reset behaviour.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Initial introduction of Inventec Transformers x86 family equipped with
AST2600 BMC SoC.
Signed-off-by: Tommy Lin <Lin.TommySC@inventec.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/7d7b20575f994a3c9018223a3c5f198d@inventec.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set I2C bus 14 to multi-master mode and add the panel device that will
register the I2C controller as a slave device.
In addition, in early Everest systems, the panel device was behind an
I2C switch, which doesn't work for slave mode. Get it working (albeit
unreliably, since a master transaction might switch the switch at any
moment) by defaulting the switch channel to the one with the panel.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-5-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Specifying gpio nodes under PCA led controllers no longer does anything,
so remove those nodes in the device trees.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
In keeping with previous systems, call the iio-hwmon bridge node
"iio-hwmon-battery" to distinguish it as the battery voltage
sensor.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
A series of changes to update the gpmc related bindings to yaml
format, and a few non-urgent dts fixes.
-----BEGIN PGP SIGNATURE-----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=2byI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFwh4kACgkQmmx57+YA
GNlt7w/8DMlz/ZcYin4zyJz4F9QpLxNvvLtBlL7yrtFpScYRXegEVL0gNR3S+1pE
+Jo5fL25NO6KaHa2n08ns6mNnUycnngBFlYLUwIlKnT+bshTql5uM90Gogjm4pG9
KItIx5bJR2xE22NgfLYUX74CYCtrFKKucLdl8Fnfj/TYKg3yBIR1jmfg7gXSkiqw
fopRFntlXMDkZR4mzlvuDzdzksqFXubYuEHDdsRlmXFfLGcuDq7QQFSk0G1Zf7XF
JI1eHWZnHjPBr8NT8qR2XxBVHt9KMDvtz1XmXhP9csqdVbCyTC8JWl7Lt7Gdcw1t
TTUnX97LyPa7T4K7if08U98yoSj5CyQsXyos1AScr5WWdhD5Y98Z6SM3EJeXto1a
zFQMiGRRhGFo3OYOcsXVefelXhzHxLcgxaEl9/A/hcUYu/8Ns2VpYho6C1H/L1ek
8to5d3R03jitywJbU2iv1AuyvFQqGobcsbdV0OrFWtIiIT4dzDIvmh7RcU14U95r
oh9kcAC4GCoXPZjrBjr6oFlK+gWm6KByvsYi4IvXXUskMjd/p2NDHF+Gl+4v0HwE
u12TvlNXbAe2GCBRXQ3HOVdafTRBqkFqYsDyncCHgSZxHqo8Lgm975vdDvljE6aF
JFDawUeEhmlduhCArTcPD3zQ/NsxKXUKFpCj+0UxHm3MfuqwP5w=
=mJMK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.16/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Changes for omap gpmc bindings and devicetree files for v5.16
A series of changes to update the gpmc related bindings to yaml
format, and a few non-urgent dts fixes.
* tag 'omap-for-v5.16/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap: fix gpmc,mux-add-data type
ARM: dts: omap: Fix boolean properties gpmc,cycle2cycle-{same|diff}csen
dt-bindings: memory-controllers: ti,gpmc: Convert to yaml
dt-bindings: mtd: ti,gpmc-onenand: Convert to yaml
dt-bindings: mtd: ti,gpmc-nand: Convert to yaml
dt-bindings: memory-controllers: Introduce ti,gpmc-child
dt-bindings: net: Remove gpmc-eth.txt
dt-bindings: mtd: Remove gpmc-nor.txt
Link: https://lore.kernel.org/r/pull-1634280279-284035@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN
Controllers can be connected via SPI or via SDIO.
Convert the two Device Tree binding documents to json-schema, and merge
them into a single document.
Add missing ti,wl1285 compatible value.
Add missing interrupt-names property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/23a2fbc46255a988e5d36f6c14abb7130480d200.1634646975.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
This adds the definition of the rtc device node. The RTC being able to
work with the oscillator at 12Mhz for now, it shares the same xtal than
the watchdog.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/all/20210823171613.18941-4-romain.perier@gmail.com
This is already in v5.15-rc5, but I'm adding it here as well to get
a clean build of the dts files.
* tag 'arm-soc/for-5.15/devicetree':
ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
ARM: dts: bcm2711: fix MDIO #address- and #size-cells
ARM: dts: bcm283x: Fix VEC address for BCM2711
of the actually non-matching fallback-string for usb-phys
on rk3066/rk3188 (most-specific compatible is and must always
be used).
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmFv1y4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdge5FB/9goi0XtyuwiVDSV9r0Ala7Q5+iMrUj0Qtv
9Vzh28CUodSUVJqY0VTbGfzZeb1mpw/Mf6vt0JwatKcYe3wwl88+noca1JERYMST
2iZDeCMF1sx++8/7fM0Dn1+1mOF7yZR7yoi4ybFDG4LHdJE6wNCkB48LVK5jDu7t
NvkPYGtYJG3Qdfaezw/cwVel/h4EwCY5Mh4Pdn6MXKKVafKZpDo0nuI0MjCKz+Gd
7cfSpP4QtwX78gles0IhwNXhvbvxPkrOulLDBCk/AEEvOWqNXKoDc3m66yCBBzsB
3xrlDLnpNvSutFajKEcwpQCZJVrnp3dYbzhHOcC343sMLzoJm2yb
=MOmw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rYMJ
-----END PGP SIGNATURE-----
Merge tag 'v5.16-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Adapt gpio subnode names to match the yaml binding and removal
of the actually non-matching fallback-string for usb-phys
on rk3066/rk3188 (most-specific compatible is and must always
be used).
* tag 'v5.16-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: remove usb-phy fallback string from rk3066a/rk3188
ARM: dts: rockchip: change gpio nodenames
Link: https://lore.kernel.org/r/3630369.N7QejLDta5@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFq0UoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4doggAu5reFlP/kBlBoQcqVZTZdeP+bQ14
lQVrp8qj6+Z6Im2BvXF/PbeyadFY2dTzTxIc3+LbA3dne4ukiO/Ihfl1Mv1EdWUr
6pdIEIFom97jh7TDyayDnCrJFNIdIetZGAwntv/CNL465YxptK/7GVksz3WBukYl
GAug+1c5U9V8Yd+YCSYUHNVviooeXMU2OjLJzy4wq1nm231mHoI3MsoLUlNNWlA8
qjHNYor5CPBkB7Djf6CVNjTmrCK4VcCMQs7AlYF3tFi9Dq0niyTD6Jsj2INeP4qA
jvs8wTGfEAltleCQsIuLeiCstWcQCCCAlGziskyvFOmRQTOqIuKFqkrNYA==
=iChy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NS3u
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.16:
- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.
* tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (42 commits)
ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
ARM: dts: ls1021a: move thermal-zones node out of soc/
ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node
ARM: dts: ls1021a-qds: change fpga to simple-mfd device
ARM: dts: ls1021a: add #power-domain-cells for power-controller node
ARM: dts: ls1021a: add #dma-cells to qdma node
ARM: dts: ls1021a: fix memory node for schema check
ARM: dts: ls1021a: remove regulators simple-bus
ARM: dts: ls1021a: disable ifc node by default
ARM: dts: ls1021a: breakup long values in thermal node
ARM: dts: ls1021a: fix board compatible to follow binding schema
ARM: dts: ls1021a: update pcie nodes for dt-schema check
ARM: dts: ls1021a-qds: Add node for QSPI flash
ARM: dts: ls1021a: change to use SPDX identifiers
ARM: dts: ls1021a: change dma channels order to match schema
ARM: dts: ls1021a: remove clock-names property for i2c nodes
ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties
ARM: dts: imx6: phytec: Add gpio pinctrl for i2c bus recovery
ARM: dts: imx6: skov: provide panel support for lt2 variants
ARM: dts: imx6qdl-apalis: Fix typo in ADC comment
...
Link: https://lore.kernel.org/r/20211016140138.1603-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the conversion of rockchip-usb-phy.yaml a long time used fallback
string for rk3066a/rk3188 was added. The linux driver doesn't do much with
the GRF phy address range, however the u-boot driver rockchip_usb2_phy.c
does. The bits in GRF_UOC0_CON2 for rk3066a/rk3188 and rk3288 for example
don't match. Remove the usb-phy fallback string for rk3066a/rk3188
to prevent possible strange side effects.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210828111218.10026-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Gemini PCI 'interrupt-map' does not vary by board, so let's move
the definition to a common location. This avoids having incomplete
interrupt properties (i.e. #interrupt-cells without interrupt-map).
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move the PCI 'interrupt-map-mask' and '#interrupt-cells' properties
alongside the 'interrupt-map' property in each board dts. This avoids
having incomplete set of interrupt properties which may fail validation.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Highlights:
----------
- MPU:
- ST boards:
- Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
with 512 MB of DDR3. Several connections are available on this
board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in
this tag.
- Change IRQ level for STUSB1600 on DKx boards.
- Fix SAI subclocks range.
- Add ck_usb0_48m clock in USB OHCI node device to match with
STM32MP15 datasheet.
- DH boards:
- Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
- Fix SAI pin muxing.
- Odyssey:
- Set DCMI pins.
-----BEGIN PGP SIGNATURE-----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=zn1y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=X4fu
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.16, round 1
Highlights:
----------
- MPU:
- ST boards:
- Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
with 512 MB of DDR3. Several connections are available on this
board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in
this tag.
- Change IRQ level for STUSB1600 on DKx boards.
- Fix SAI subclocks range.
- Add ck_usb0_48m clock in USB OHCI node device to match with
STM32MP15 datasheet.
- DH boards:
- Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
- Fix SAI pin muxing.
- Odyssey:
- Set DCMI pins.
* tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
ARM: dts: stm32: fix SAI sub nodes register range
ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey
ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
ARM: dts: stm32: add initial support of stm32mp135f-dk board
dt-bindings: stm32: document stm32mp135f-dk board
ARM: dts: stm32: add STM32MP13 SoCs support
Link: https://lore.kernel.org/r/9d52c3e2-a3b9-89f3-1896-7cd3560e7010@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New machines:
* TYAN S7106 BMC, a x86 server from about four years ago
- Descriptions for the AST2600 ADC, which now has an upstream driver
- Lots of GPIO line names. The OpenBMC project has adopted a scheme for
naming the lines, and new additions will follow this guide
- New I2C devices for Rainier, Everest, EthanolX, Mt Jade
- Fixes for fp5280g2 which has seen some recent development, including
the addtion of a QEmu machine for testing
-----BEGIN PGP SIGNATURE-----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=i5LZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6eyi
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.15
- New machines:
* TYAN S7106 BMC, a x86 server from about four years ago
- Descriptions for the AST2600 ADC, which now has an upstream driver
- Lots of GPIO line names. The OpenBMC project has adopted a scheme for
naming the lines, and new additions will follow this guide
- New I2C devices for Rainier, Everest, EthanolX, Mt Jade
- Fixes for fp5280g2 which has seen some recent development, including
the addtion of a QEmu machine for testing
* tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: fp5280g2: Use the 64M layout
ARM: dts: aspeed: Add TYAN S7106 BMC machine
ARM: dts: aspeed: rainier: Add power-config-full-load gpio
ARM: dts: aspeed: p10bmc: Define secure boot gpio
ARM: dts: aspeed: mtjade: Add some gpios
ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest
ARM: dts: everest: Define name for gpio line B6
ARM: dts: everest: Define name for gpio line Q2
ARM: dts: rainier: Define name for gpio line Q2
ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6
ARM: dts: aspeed: everest: Add I2C bus 15 muxes
ARM: dts: aspeed: rainier: Add system LEDs
ARM: dts: aspeed: amd-ethanolx: Add FRU EEPROM
ARM: dts: fp5280g2: Enable KCS 3 for MCTP binding
Link: https://lore.kernel.org/r/CACPK8XdrMzY9tzdof7KpzxKquTo7GcWW4N9Zqwtmmu73C7htXA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Flag the janice SPI display lines properly for the right line
semantics.
- Fix some errors in the Skomer regulator configuration.
- Fix some SD card pin configurations on Skomer.
- Assign the Skomer SD card a 300 ms power-on delay.
- Rewrite the battery nodes to use the standard binding
"monitored-battery" as used in the updated bindings, and
provide the right Samsung battery compatibles for the Samsung
phones.
-----BEGIN PGP SIGNATURE-----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=VZoq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vIcZ
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 DTS updates:
- Flag the janice SPI display lines properly for the right line
semantics.
- Fix some errors in the Skomer regulator configuration.
- Fix some SD card pin configurations on Skomer.
- Assign the Skomer SD card a 300 ms power-on delay.
- Rewrite the battery nodes to use the standard binding
"monitored-battery" as used in the updated bindings, and
provide the right Samsung battery compatibles for the Samsung
phones.
* tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Switch battery nodes to standard
ARM: dts: ux500: Skomer eMMC needs 300 ms power on
ARM: dts: ux500: Fix up SD card pin config
ARM: dts: ux500: Skomer regulator fixes
ARM: dts: ux500: Tag Janice display SPI correct
Link: https://lore.kernel.org/r/CACRpkdYf5GwRvG1Gemk4mE+aw6UnAVTY8OudwsVNPQXThHXu6g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
-----BEGIN PGP SIGNATURE-----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=KGAI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ptpv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
* tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits)
arm64: dts: broadcom: Add reference to RPi CM4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4
dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
dt-bindings: display: bcm2835: add optional property power-domains
ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
ARM: BCM53016: MR32: get mac-address from nvmem
ARM: BCM53016: Specify switch ports for Meraki MR32
ARM: dts: BCM53573: Add Tenda AC9 switch ports
ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
ARM: dts: BCM5301X: Specify switch ports for more devices
ARM: dts: NSP: Fix MX65 MDIO mux warnings
ARM: dts: NSP: Fix MX64/MX65 eeprom node name
ARM: dts: NSP: Fix MDIO mux node names
ARM: dts: NSP: Fix mpcore, mmc node names
ARM: dts: NSP: Add bcm958623hr board name to dts
ARM: dts: BCM5301X: Fix memory nodes names
ARM: dts: BCM5301X: Fix MDIO mux binding
ARM: dts: BCM5301X: Fix nodes names
...
Link: https://lore.kernel.org/r/20211013174016.831348-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
-----BEGIN PGP SIGNATURE-----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=x0TI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ur86
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.16
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
* tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom, add missing devices
ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY
ARM: dts: qcom: fill secondary compatible for multiple boards
ARM: dts: qcom: apq8064: adjust memory node according to specs
ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2
ARM: dts: qcom: Add support for LG G Watch R
dt-bindings: arm: qcom: Document APQ8026 SoC binding
ARM: dts: qcom: Add pm8226 PMIC
ARM: dts: qcom: msm8226: Add more SoC bits
dt-bindings: arm: qcom: Document SDX65 platform and boards
Link: https://lore.kernel.org/r/20211012174310.1017857-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Both the decompressor code and the kasan logic try to override
the memcpy() and memmove() definitions, which leading to a clash
in a KASAN-enabled kernel with XZ decompression:
arch/arm/boot/compressed/decompress.c:50:9: error: 'memmove' macro redefined [-Werror,-Wmacro-redefined]
#define memmove memmove
^
arch/arm/include/asm/string.h:59:9: note: previous definition is here
#define memmove(dst, src, len) __memmove(dst, src, len)
^
arch/arm/boot/compressed/decompress.c:51:9: error: 'memcpy' macro redefined [-Werror,-Wmacro-redefined]
#define memcpy memcpy
^
arch/arm/include/asm/string.h:58:9: note: previous definition is here
#define memcpy(dst, src, len) __memcpy(dst, src, len)
^
Here we want the set of functions from the decompressor, so undefine
the other macros before the override.
Link: https://lore.kernel.org/linux-arm-kernel/CACRpkdZYJogU_SN3H9oeVq=zJkRgRT1gDz3xp59gdqWXxw-B=w@mail.gmail.com/
Link: https://lore.kernel.org/lkml/202105091112.F5rmd4By-lkp@intel.com/
Fixes: d6d51a96c7 ("ARM: 9014/2: Replace string mem* functions for KASan")
Fixes: a7f464f3db ("ARM: 7001/2: Wire up support for the XZ decompressor")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Add support for parsing the "linux,usable-memory-range" DT property.
This property is used to describe the usable memory reserved for the
crash dump kernel, and thus makes the memory reservation explicit.
If present, Linux no longer needs to mask the program counter, and rely
on the "mem=" kernel parameter to obtain the start and size of usable
memory.
For backwards compatibility, the traditional method to derive the start
of memory is still used if "linux,usable-memory-range" is absent.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
A new 'chassis-type' root node property has recently been approved for
the device-tree specification.
Add this property for end-user devices (such as laptops,
smartphones and tablets) based on Samsung S5Pv210 ARM SoCs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211017101228.19478-3-krzysztof.kozlowski@canonical.com
A new 'chassis-type' root node property has recently been approved for
the device-tree specification.
Add this property for end-user devices (such as laptops,
smartphones and tablets) based on Samsung Exynos ARM SoCs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211017101228.19478-2-krzysztof.kozlowski@canonical.com
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-24-dmitry.baryshkov@linaro.org
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-23-dmitry.baryshkov@linaro.org
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-22-dmitry.baryshkov@linaro.org
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-21-dmitry.baryshkov@linaro.org
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-20-dmitry.baryshkov@linaro.org
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-19-dmitry.baryshkov@linaro.org
The majority of device tree nodes for mpps use xxxx-state as pinctrl
nodes. Change names of mpps pinctrl nodes for qcom-apq8060-dragonboard
board to follow that pattern.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-10-dmitry.baryshkov@linaro.org
Rename mpp node to mpps@50 (instead of mpp@50). Also add gpio-ranges
property to mpps device tree nodes, adding the mapping between pinctrl
and GPIO pins.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-9-dmitry.baryshkov@linaro.org
Currently all gpio nodenames are sort of identical to there label.
Nodenames should be of a generic type, so change them all.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211007144019.7461-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A small number fixes this time, mostly touching actual code:
- Add platform device for i.MX System Reset Controller (SRC) to fix
a regression caused by fw_devlink change.
- A fixup for a boot regression caused by my own rework for the
Qualcomm SCM driver.
- Multiple bugfixes for the Arm FFA and optee firmware drivers,
addressing problems when they are built as a loadable module.
- Four dts bugfixes for the Broadcom SoC used in Raspberry pi, addressing
VEC (video encoder), MDIO bus controller #address-cells/#size-cells,
SDIO voltage and PCIe host bridge dtc warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=87lq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A small number fixes this time, mostly touching actual code:
- Add platform device for i.MX System Reset Controller (SRC) to
fix a regression caused by fw_devlink change
- A fixup for a boot regression caused by my own rework for the
Qualcomm SCM driver
- Multiple bugfixes for the Arm FFA and optee firmware drivers,
addressing problems when they are built as a loadable module
- Four dts bugfixes for the Broadcom SoC used in Raspberry pi,
addressing VEC (video encoder), MDIO bus controller
#address-cells/#size-cells, SDIO voltage and PCIe host bridge
dtc warnings"
* tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: imx: register reset controller from a platform driver
iommu/arm: fix ARM_SMMU_QCOM compilation
ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
tee: optee: Fix missing devices unregister during optee_remove
ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
ARM: dts: bcm2711: fix MDIO #address- and #size-cells
ARM: dts: bcm283x: Fix VEC address for BCM2711
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
Referring to the note under USBH reset and clocks chapter of RM0436,
"In order to access USBH_OHCI registers it is necessary to activate the USB
clocks by enabling the PLL controlled by USBPHYC" (ck_usbo_48m).
The point is, when USBPHYC PLL is not enabled, OHCI register access
freezes the resume from STANDBY. It is the case when dual USBH is enabled,
instead of OTG + single USBH.
When OTG is probed, as ck_usbo_48m is USBO clock parent, then USBPHYC PLL
is enabled and OHCI register access is OK.
This patch adds ck_usbo_48m (provided by USBPHYC PLL) as clock of USBH
OHCI, thus USBPHYC PLL will be enabled and OHCI register access will be OK.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.
Fixes: 5afd65c3a0 ("ARM: dts: stm32: add sai support on stm32mp157c")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
STUSB1600 IRQ (Alert pin) is active low (open drain). Interrupts may get
lost currently, so fix the IRQ type.
Fixes: 83686162c0 ("ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. The
DCMI pins used on this output are defined in the pin state definition
&pinctrl/dcmi-1, AKA &dcmi_pins_b (added in mainline commit
02814a4152). Set these pins as the default
pinctrl of the DCMI peripheral in the board device tree.
The pins are not used for any other purpose, so it seems safe to assume
most users will not need to override (delete) what this patch provides.
status defaults to "disabled", so the peripheral will not be
unnecessarily started. And the users who actually intend to make use of
a camera on the DVP port will have this little part of the configuration
ready.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.
There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex, so opt for the second option.
Fixes: 76045bc457 ("ARM: dts: stm32: Add QSPI NOR on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add support of stm32mp135f discovery board (part number: STM32MP135F-DK).
It embeds a STM32MP135F SOC with 512 MB of DDR3.
Several connections are available on this board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in this commit.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead. This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Property "postion" is not documented in the mma8452 binding. Remove it
to resolve the error in "make dtbs_check"
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The FPGA is not really a bus but more like an MFD device. Change the
compatible string from "simple-bus" to "simple-mfd". This also fix a
node name issue with simple-bus schema.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the #power-domain-cells for power-controller node as required by the
schema.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the following error from "make dtbs_check"
memory: False schema does not allow ...
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no regulator bus in hardware. So move the regulator nodes out
and remove the regulators simple-bus. This also make the dts align with
the simple-bus schema.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Disable the bus in the SoC dtsi file to be enabled only in board dts
files. Also breakup long values in the ifc node to fix dtbs_check.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Align the compatible strings with the board binding defined in schema
file.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the missing node for qspi flash.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Although the ordering of DMA channels was not relevant in the txt binding,
it is defined as ordered in the converted yaml schema. Update the dts
to match the order.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The property is optional and not used in matching the clock in driver.
Remove it to avoid dtbs_check issues.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make use of the i2c bus recovery feature and enable it on PHYTEC
phyCORE-based modules and boards.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This force-converts the per-device battery node into the standard
properties using "simple-battery" for the HREF machines and the
corresponding Samsung battery for the mobile phones.
This is fine to do since the battery data in the DTS files has never
been deployed or used. In commit a1149ae975
"ARM: ux500: Disable Power Supply and Battery Management by default"
it was turned off and has not been switched back on since. In
the meantime standardized bindings for batteries have appeared
making the old AB8500 battery bindings obsolete.
The battery node which is now in the middle of an included file
is obviously a per-device piece of information so push this down
to each board. The HREF machines all have the same battery and can
share a single node in the HREF dtsi file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5.15, please pull the following:
- Stefan fixes the VEC (video encoder) bus address for 2711, fixes the
MDIO bus controller #address-cells/#size-cells inversion and the SDIO
regulator voltage ranges
- Nicolas fixes DTC warnings for the PCIe host bridge and its child
USB device
-----BEGIN PGP SIGNATURE-----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=EOTX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SPDH
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.15/devicetree' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.15, please pull the following:
- Stefan fixes the VEC (video encoder) bus address for 2711, fixes the
MDIO bus controller #address-cells/#size-cells inversion and the SDIO
regulator voltage ranges
- Nicolas fixes DTC warnings for the PCIe host bridge and its child
USB device
* tag 'arm-soc/for-5.15/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
ARM: dts: bcm2711: fix MDIO #address- and #size-cells
ARM: dts: bcm283x: Fix VEC address for BCM2711
Link: https://lore.kernel.org/r/20211012213841.1872021-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the device tree for a Netgear GS110EMX switch featuring 8 Gigabit
ports and 2 Multi-Gig ports (100M/1G/2.5G/5G/10G). An 88E6390X switch
sits at its core connecting to two 88X3310P 10G PHYs. The control plane
is handled by an 88F6811 Armada 381 SoC.
The following functionality is tested:
- 8 gigabit Ethernet ports connecting via 88E6390X to the 88F6811
- serial console UART
- 128 MB commercial grade DDR3L SDRAM
- 16 MB serial SPI NOR flash
The two 88X3310P 10G PHYs while detected during boot seem neither to
detect any link nor pass any traffic.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
dtbs_check currently complains that:
arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning
(pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format
error, expected "0,0"
Unsurprisingly pci@0,0 is the right address, as illustrated by its reg
property:
&pcie0 {
pci@0,0 {
/*
* As defined in the IEEE Std 1275-1994 document,
* reg is a five-cell address encoded as (phys.hi
* phys.mid phys.lo size.hi size.lo). phys.hi
* should contain the device's BDF as 0b00000000
* bbbbbbbb dddddfff 00000000. The other cells
* should be zero.
*/
reg = <0 0 0 0 0>;
};
};
The device is clearly 0. So fix it.
Also add a missing 'device_type = "pci"'.
Fixes: 258f92d2f8 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@redhat.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
The TYAN S7106 is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Oskar Senft <osk@google.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210909004920.1634322-1-osk@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the power-config-full-load described in:
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load
The power-config-full-load gpio is designed to be used to specify how
many power supplies the system should have, in rainier it is 2 or 4. If
enough power supplies fail so that the system no longer has redundancy
(no longer n+1), the hardware will signal to the Onboard Chip Controller
that the system may be oversubscribed, and performance may need to be
reduced so the system can maintain it's powered on state.
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211005192226.213539-1-anoo@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This contains various cleanup patches to 32-bit ARM Tegra device trees
and enables USB OTG mode on the Nexus 7.
-----BEGIN PGP SIGNATURE-----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=kkWf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=X0fi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.16-rc1
This contains various cleanup patches to 32-bit ARM Tegra device trees
and enables USB OTG mode on the Nexus 7.
* tag 'tegra-for-5.16-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Remove useless usb-ehci compatible string
ARM: tegra: Remove unused backlight-boot-off property
ARM: tegra: nexus7: Enable USB OTG mode
ARM: tegra: Add new properties to USB PHY device-tree nodes
ARM: tegra: Update Broadcom Bluetooth device-tree nodes
ARM: tegra: acer-a500: Correct compatible of ak8975 magnetometer
Link: https://lore.kernel.org/r/20211008201132.1678814-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Addition of a new variant in the sama5d2 family: the sama5d29 with
significant updates being CAN and Ethernet controllers;
- Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
maintained up to this moment, separately, in OpenWrt tree;
- Two more boards gained I2C bus recovery support;
- Tse850 updated with one Ethernet fix;
- Sama7g5ek gained ADC nodes and sama5d27_wlsom1 WiFi support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYWQuQwAKCRAfOrpwrNPN
DP3CAQCOSNWmCOwvlWJdu7/FjsxPsPXmUyUHW0oAFF80sEkaBQEAiN6QlIDvTB9U
Cxn/wYe2zbQ+vJbqkuODTqK104OUdA4=
=Ph50
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FHko
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT #1 for 5.16:
- Addition of a new variant in the sama5d2 family: the sama5d29 with
significant updates being CAN and Ethernet controllers;
- Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
maintained up to this moment, separately, in OpenWrt tree;
- Two more boards gained I2C bus recovery support;
- Tse850 updated with one Ethernet fix;
- Sama7g5ek gained ADC nodes and sama5d27_wlsom1 WiFi support.
* tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: dts: sama5d29: Add dtsi file for sama5d29
ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery support
ARM: dts: at91: tse850: the emac<->phy interface is rmii
ARM: dts: at91: add Exegin Q5xR5 board
dt-bindings: ARM: at91: document exegin q5xr5 board
dt-bindings: add vendor prefix for exegin
ARM: dts: at91: add CalAmp LMU5000 board
dt-bindings: ARM: at91: document CalAmp LMU5000 board
dt-bindings: add vendor prefix for calamp
ARM: dts: at91: at91sam9260: add pinctrl label
ARM: dts: at91-sama5d27_som1_ek: Added I2C bus recovery support
ARM: dts: at91: sama7g5ek: enable ADC on the board
ARM: dts: at91: sama7g5: add node for the ADC
ARM: dts: at91: sama5d27_wlsom1: add wifi device
Link: https://lore.kernel.org/r/20211011123438.16562-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
gpmc,mux-add-data is not boolean.
Fixes the below errors flagged by dtbs_check.
"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
gpmc,cycle2cycle-{same|diff}csen are boolean properties. Fix them
to prevent dtbs_check errors.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On SPEAr3xx, ethernet driver is not compatible with the SPEAr600
one.
Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and
needs some driver tuning compare to SPEAr600.
The v3.40 IP support was added to stmmac driver and this patch
fixes this issue and use the correct compatible string for
SPEAr3xx
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Input pin that indicates that the BMC is configured to boot with security
protections enforced.
Pulled up by default (secure). Placing the jumper will pull the pin down
(bypass security).
When in the secure boot state, it makes the EEPROM at 0x50 on bus 14
read only.
Link: https://lore.kernel.org/r/20210923074606.283393-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add S0_SCP_AUTH_FAIL, S1_SCP_AUTH_FAIL gpios to indicates firmware
authentication fail on each socket.
Add gpio RTC_BAT_SEN_EN to enable RTC battery adc sensor.
Add BMC_I2C4_O_EN gpio to go high at boot to enable access to I2C4 bus.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210917082945.19111-1-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:
- Fix compiler warning for sysc_init_soc() that got recently introduced
- Fix external abort for am335x pruss as otherwise some am335x will hang
- Use CLKDM_NOAUTO quirk also for dra7 dcan1
- Fix older NAND device node regression for omap3-sdp
-----BEGIN PGP SIGNATURE-----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=2z/N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFfRvUACgkQmmx57+YA
GNn9FA/9GlTM6ROI+JrSCIGMn0LwxhQbTWhRLWtTyYN6rJ02FgVJR2EgvVXZ1wAb
egbN7mpGMGzTvRUIIcLjeSQwvuPMdkwY9WpiwcDHB8zXAD9khSaWBbJmYAgtYaSt
uwatqzBwRl2nZM65FVNMa3x9+6FTa9QJGNexSqRLfLzAf1tK5IIDe7d2vN922TLf
f4hndqimNBTQ90+K1Hhh6S13TahLJJqxWuJGdy+ijBSmW+LAYCGnRBRZ0UwsIzAY
3tbg1p7fueTDcYvMhiQjGkOmx9H0DYTz3UZgGsX5xUqO4wzriF9SXgrCpv8v6g5i
8GUgctoRkh9KG4MNvA6ntsSMZLRqflkLlLTc3tJ/tUzRM+4EeyVw0MuKA7HB57f9
8uMQGJhaYWaA9aNgu5GPqr3i0dFtkgWwAQf4+mvVIEnRXwnSA35Z3/i+TTKwrdoa
2tcuqIYl0hUcqmcVqJyU0OHlA2BZ5UwMK8Dz48lSsqgM3zbOg1BEgKTmVCinD1xI
W1AafAusVhCcvLGjLVtiNd0/MDysvSCreDvUgE5wieNLMQd9mOTqzTPIqYAt0d3u
Mzk83glLj6QggDJyqpyKaKiZsZry6XRD5uGGYQ/igf4Bks9h99IvRy1LT6DcJjll
gU6TvemlUUqq9qc3/94B2Agwe13I25fszDJtXQV0MYoLqWhOFdM=
=fI0x
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.15
Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:
- Fix compiler warning for sysc_init_soc() that got recently introduced
- Fix external abort for am335x pruss as otherwise some am335x will hang
- Use CLKDM_NOAUTO quirk also for dra7 dcan1
- Fix older NAND device node regression for omap3-sdp
* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
soc: ti: omap-prm: Fix external abort for am335x pruss
bus: ti-sysc: Add break in switch statement in sysc_init_soc()
Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There's no such thing as a generic USB EHCI controller. The EHCI
controllers found on Tegra SoCs are instantiations that need Tegra-
specific glue to work properly, so drop the generic compatible string
and keep only the Tegra-specific ones.
Signed-off-by: Thierry Reding <treding@nvidia.com>
- A couple of fixes from Haibo Chen to update SPI NOR TX bus width for
i.MX6 and i.MX8 boards. This becomes necessary because spi-nor driver
starts using the setting in DT.
- Mark buck2 always-on for i.MX8MM Kontron-n801x-som board to avoid the
core supply being turned off unexpectedly.
- Fix eSDHC2 device tree settings for LS1028A SoC.
- Disable GIC CPU interface before calling stby-poweroff sequence to fix
power-off failure on i.MX6.
- Fix M2_RST# GPIO pinmux on i.MX8M venice-gw7902 boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFdm+0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7LyAf/QS/9SEi7xwgmsE6ywozsk/VZB8Ze
77MSlR1U/HoqtreF9RNGB31Wv2TI0Cxi05TEbSonFDrk4rHFdh158YQZk8sINWOT
AXIWso6qMqCA8onmHkTLgYKj2rFBdfzKffhdv/IhmIPW08DouFxRq1sHFOae0Dv4
Lo+4fhHqd3OYGPAi3Po9DgYOjJt7VujY7XRJJIrq3RMarxbXDAbpz7W12ioB/j1T
x24jxEnaDfgpfNiCRoks2CEttnA28iIY3BXMH6J37ilFrKWTdyT45oIFe4bs8u7n
ZRuwJs8W5FclRYVquXkDlh/i/h1YmxdDs80lseQl9G/dsZZ3oKxE+VpNrA==
=Xtlw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lVwf
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.15, round 2:
- A couple of fixes from Haibo Chen to update SPI NOR TX bus width for
i.MX6 and i.MX8 boards. This becomes necessary because spi-nor driver
starts using the setting in DT.
- Mark buck2 always-on for i.MX8MM Kontron-n801x-som board to avoid the
core supply being turned off unexpectedly.
- Fix eSDHC2 device tree settings for LS1028A SoC.
- Disable GIC CPU interface before calling stby-poweroff sequence to fix
power-off failure on i.MX6.
- Fix M2_RST# GPIO pinmux on i.MX8M venice-gw7902 boards.
* tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
arm64: dts: ls1028a: fix eSDHC2 node
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
arm64: dts: imx8: change the spi-nor tx
ARM: dts: imx: change the spi-nor tx
Link: https://lore.kernel.org/r/20211006125734.GA10197@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds the matching carrier for Raspberry Pi Compute Module 4.
Instead of xHCI USB host controller there is just a USB 2.0 interface
connected to the DWC2 controller from the BCM2711. As a result
there is a free PCIe Gen 2 socket. Also there are 2 full-size HDMI 2.0
connectors.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1628334401-6577-10-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
The Raspberry Pi Compute Module 4 (CM4) are SoMs which contain the
following:
* BCM2711 quad core processor
* up to 8 GB RAM
* up to 32 GB eMMC
* a GPIO expander
* Gigabit PHY BCM54210PE
* Wifi/BT module with internal and external antenna
The eMMC and the Wifi/BT module are optional.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1628334401-6577-9-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
A Wifi/BT chip is quite common for the Raspberry Pi boards. So move those
definitions into a separate dtsi in order to avoid copy & paste. This
change was inspired by a vendor tree patch from Phil Elwell.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1628334401-6577-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
DT schema check complains at sd_io_1v8_reg about the following:
[1800000, 1, 3300000, 0] is too long
Additional items are not allowed (3300000, 0 were unexpected)
So fix the states definition.
Fixes: 7dbe8c62ce ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1628334401-6577-3-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
The values of #address-cells and #size-cells are swapped. Fix this
and avoid the following DT schema warnings for mdio@e14:
#address-cells:0:0: 1 was expected
#size-cells:0:0: 0 was expected
Fixes: be8af7a9e3 ("ARM: dts: bcm2711-rpi-4: Enable GENET support")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1628334401-6577-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
The VEC has a different address (0x7ec13000) on the BCM2711 (used in
e.g. Raspberry Pi 4) compared to BCM283x (e.g. Pi 3 and earlier). This
was erroneously not taken account for.
Definition of the VEC in the devicetrees had to be moved from
bcm283x.dtsi to bcm2711.dtsi and bcm2835-common.dtsi to allow for this
differentiation.
Fixes: 7894bdc622 ("ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible")
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1626980528-3835-1-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
BB2D is a Vivante GC 2D Accelerator.
This adds the node to the dts file within a target module node.
Crossbar index number is used for interrupt mapping.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.
Fixes: ee32711195 ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add mandatory supply properties. The supply is always on, so it is just
a syntax issue, no functional change.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add mandatory supply properties. The supply is always on, so it is just
a syntax issue, no functional change.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Replace depreciated nodenames, fix label name to match scheme.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Hyphens should be used in label names. make dtbs_check complains
about that since it does not match the corresponding pattern
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Switch the compatible for the am33xx_pinmux pin controller node from
pinctrl-single to pinconf-single. The only change between these two
compatibles is that PCS_HAS_PINCONF will be true. This then allows
pinconf properties to be utilized.
The purpose of this change is to allow the PocketBeagle to use:
pinctrl-single,bias-pullup
pinctrl-single,bias-pulldown
This dts already defines these properites for gpio pins in the default
pinctrl state but it has no effect unless PCS_HAS_PINCONF is set.
The bias properties can then be modified on the corresponding gpio lines
through the gpiod uapi. The mapping between the pins and gpio lines is
defined by gpio-ranges under the gpio controller nodes in am33xx-l4.dtsi
Signed-off-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Nand is on CS1 so reg properties first field should be 1 not 0.
Fixes: 44e4716499 ("ARM: dts: omap3: Fix NAND device nodes")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- I2C EEPROM support on the RZA2MEVB development board,
- DMA, USB2.0, and audio support for the RZ/G2L SoC,
- USB2.0, I2C, audio, ADC, and CANFD support for the RZ/G2L SMARC EVK
development board,
- Support for more R-Car Gen3e SoCs (H3e, M3e, M3Ne(-2G), D3e, E3e,
H3Ne),
- PWM support for the R-Car M3-W+ and V3U SoCs,
- IPMMU support for SDHI on the R-Car V3U SoC,
- Switches support for the Falcon development board,
- Improve Ethernet PHY descriptions to fix reset handling after kexec,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYVbUMwAKCRCKwlD9ZEnx
cC3lAQCXJwi2QXqvWKKLPmnkT7GwD5OaF4F1ykBmfExD3fHpcwD5ATmkHwvIGkRG
JOH1BDNSmcq36xwaAsRXmCAWm0dG6wE=
=HxRU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9/VI
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.16
- I2C EEPROM support on the RZA2MEVB development board,
- DMA, USB2.0, and audio support for the RZ/G2L SoC,
- USB2.0, I2C, audio, ADC, and CANFD support for the RZ/G2L SMARC EVK
development board,
- Support for more R-Car Gen3e SoCs (H3e, M3e, M3Ne(-2G), D3e, E3e,
H3Ne),
- PWM support for the R-Car M3-W+ and V3U SoCs,
- IPMMU support for SDHI on the R-Car V3U SoC,
- Switches support for the Falcon development board,
- Improve Ethernet PHY descriptions to fix reset handling after kexec,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (45 commits)
arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets
ARM: dts: rzg1: Add missing Ethernet PHY resets
ARM: dts: r-mobile: Add missing Ethernet PHY resets
arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs
arm64: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
arm64: dts: renesas: Add compatible properties to AR8031 Ethernet PHYs
ARM: dts: renesas: Add compatible properties to uPD6061x Ethernet PHYs
ARM: dts: renesas: Add compatible properties to RTL8201FL Ethernet PHYs
ARM: dts: renesas: Add compatible properties to LAN8710A Ethernet PHYs
ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
ARM: dts: renesas: Add compatible properties to KSZ8081 Ethernet PHYs
ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs
arm64: dts: renesas: beacon: Fix Ethernet PHY mode
ARM: dts: renesas: Fix SMSC Ethernet compatible values
arm64: dts: renesas: rzg2l-smarc: Enable CANFD
arm64: dts: renesas: rzg2l-smarc-som: Enable ADC on SMARC platform
arm64: dts: renesas: rzg2l-smarc-som: Move extal and memory nodes to SOM DTSI
arm64: dts: renesas: r8a779a0: falcon-cpu: Add SW47-SW49 support
arm64: dts: renesas: rzg2l-smarc: Add Mic routing
arm64: dts: renesas: rzg2l-smarc: Enable audio
...
Link: https://lore.kernel.org/r/cover.1633081147.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Revert cc8870bf4c to fix the regression on i.MX6 that suspend
support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to
f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFMHfQUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7QUwf/dO+FrGSWlVxHeG/oKMb6iQqZs0zb
40F68OYCF+ucGJlwAkErnLcqxtC7rD8NHsGvxnXMbTNlhtjl5USw0tIki+3cw1EP
LggbTjlOCRDLnF2YmWfXN+hLz5On38TG9TvvWt8x2CBO9WXgipaG8JHCCsxdXZus
vk37hZSAlwqmkXHHDApBMsMTqma8ZlDRELrgnXeHL53pYFDxKWoOhL0WHvvZ+kFO
I3lnIB4FdAOgm+EoAAW2s6v/IJobhC19KoKBrtf3FRo6KQk5A6L8T2CFPMkL0cFf
zJboFIOmwMnw00O44RWKDPWDQKKMZYJubj+zHaAnUFRfg4D9KKSDQApffA==
=oDbx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=giT+
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.15:
- Revert cc8870bf4c to fix the regression on i.MX6 that suspend
support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to
f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.
* tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable fb
ARM: dts: imx6qdl-pico: Fix Ethernet support
ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine"
ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe
Link: https://lore.kernel.org/r/20210923063356.GK13480@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Bunch of DTS fixes to resolve addressing issues with some of the device
nodes, dropping unused/undocumented properties in various nodes, and
aligning node names with dtschema.
-----BEGIN PGP SIGNATURE-----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=t92O
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFcVMMACgkQmmx57+YA
GNno/w/+Ore7cFcGJmHnarzStAuf4a1xO62SFVp0vCpxPCDbB8HROOqejjtLZlkZ
tA2TqToVfyIIkhxddJgpmU3HDyjTI+79pu7/TWbnL2m22l+HH1HYOn66PQra8Omg
GDgrfYc5wb7ijAcOxyNNy5o4mB3AqksbW6AgE+AMlbZftiaTRIM/pNxkA5xfwcUf
1Hm1gRvatzegdginF54wCkaKb4hrfEvwQUQHqGcQD8rK8BL10ue2vHBVTvCVESyi
6daMi3KjKTo/3kKd0LmFG/Z9Z6kYvDq0K0Zkz9tFLpX1FesoMy0nNTf0sIWt5foP
WSgTOnjOu660kRqBqMuMWF/M9D58zyPA9CjTv43gIkEPttKbh65H3JUJF5AdiBDc
zkisF5AuXolbJmNfJE0mZRI5gtIYSDTCqOPgMCz0g5HOcaeU4DGXz4Pc3t5PFmRK
7LlDyWruesblCe41Ry2sdAlfSlHMQ7Nz2+b4oDK6SmtxGgAEL7Kg29nWarCkNdpH
EEmg/ZmnBPmZEBFKivwPXJoLsR810mmDYP8JBUuaIjr1l78i7FS3PP8jWdcy9KCQ
222dvYJSDJ8Aack7TileX5/Dgy/5pCgUmzAbQymadhmZGVQ2ck35jDSzW3y1H98y
iYrOHZEreuspCXb4ruLAxeTanrJStHg1+EYSgLDXutQzt4Gr6Ek=
=YUKB
-----END PGP SIGNATURE-----
Merge tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Juno/Vexpress fixes for v5.15
Bunch of DTS fixes to resolve addressing issues with some of the device
nodes, dropping unused/undocumented properties in various nodes, and
aligning node names with dtschema.
* tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes
arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address
arm: dts: vexpress: Drop unused properties from motherboard node
arm64: dts: arm: drop unused interrupt-names in MHU
ARM: dts: arm: align watchdog and mmc node names with dtschema
arm64: dts: arm: align watchdog and mmc node names with dtschema
arm64: dts: fvp: Remove panel timings
Link: https://lore.kernel.org/r/20210927105249.3583380-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This corrects the use of depricated chipid and clock names, for which
support was finally dropped from the driver. It also ensures that the
DSI PLL is fed by the correct clock, now that it's being migrated to not
rely on global clock names.
-----BEGIN PGP SIGNATURE-----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=xHHw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=C1Zc
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm DTS fixes for v5.15
This corrects the use of depricated chipid and clock names, for which
support was finally dropped from the driver. It also ensures that the
DSI PLL is fed by the correct clock, now that it's being migrated to not
rely on global clock names.
* tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: update Adreno clock names
ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference
ARM: dts: qcom: apq8064: use compatible which contains chipid
Link: https://lore.kernel.org/r/20210930025526.1146-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a label for the touchscreen to allow a custom baseboard to
disable this node if needed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The STMPE811 ADC on the Apalis SoM board can be used as a provider
of ADC capabilities to other devices, for example, when a custom
baseboard has an SN74LV4051 analog mux.
Pass the 'io-channel-cells' parameter to indicate such possibility.
While at it, also pass a label for the adc device, so that it can
be referenced in the custom baseboard.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It is recommended not to use underscore in node names.
Change it to dash.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make operating point definitions comply with binding
specifications.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make operating point definitions comply with binding
specifications.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Only led-X or led are allowed according to bindings definition.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds a devicetree for the Tolino Vision 5 Ebook reader. It is
based on boards called ¨e70k02¨. It is equipped with an imx6sl SoC.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds a devicetree for the Kobo Libra H2O Ebook reader. It is based on
boards called e70k02. It is equipped with an imx6sll SoC.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Netronix board E70K02 can be found some several Ebook-Readers,
at least the Kobo Libra H2O and the Tolino Vision 5. The board
is equipped with different SoCs requiring different pinmuxes.
For now the following peripherals are included:
- LED
- Power Key
- Cover (gpio via hall sensor)
- RC5T619 PMIC
- Backlight via lm3630a
- Wifi sdio chip detection (mmc-powerseq and stuff)
It is based on vendor kernel but heavily reworked due to many
changed bindings.
Known limitations: cold colored backlight does not work due to
incompatible hard coded overvoltage setting in the driver.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the partition layout also used by the bootloader.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SPI-NOR flash on the SoM was missing from the device tree.
The TQMa7 as a designated QSPI_RESET# pin, however depending on the
hardware configuration the pin may be unconnected, or be used for a
different purpose. With this in mind, we mux the pin as a pullup and
define an input hog for it, but keep it a separate pin group, so that it
is easy for dependent Device Trees to modify the configuration.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"TQ-Systems" is written with a dash.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The MPL3115A2 I2C pressure sensor driver does not take a VCC regulator.
The bindings are so far trivial, but the datasheet does not have a VCC
pin.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a device tree for a Colibri iMX6ULL 1GB which has a eMMC instead of
the raw NAND used on other SKUs.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Nexus 7 has OTG-cable microUSB port, enable OTG mode. USB peripheral
devices now can be connected to Nexus 7 using OTG adapter, switching
USB port into host mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add new properties to USB PHYs needed for enabling USB OTG mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The host-wakeup GPIO is now marked as deprecated in the broadcom-bluetooth
device-tree binding, it's replaced with the host-wakeup interrupt. Update
Tegra device-trees to the recent version of the Bluetooth binding.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The "ak,ak8975" compatible is not recognized by dt-bindings, it's
deprecated. Use supported "asahi-kasei,ak8975" compatible.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Thierry Reding <treding@nvidia.com>
With commit c709135e57 ("pinctrl: at91-pio4: add support for slew-rate")
and commit cbde6c823b ("pinctrl: at91-pio4: Fix slew rate disablement")
the slew-rate is enabled by default for each configured pin. The datasheet
specifies at chapter "Output Driver AC Characteristics" that HSIO
drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate
setting but are rather calibrated against an external 1% resistor mounted
on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal
frequency and the external load, it is possible to adjust their target
output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled
at the moment in device tree).
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com
Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain
GMAC's MDIO pins should be configured with slew-rate enabled, while the
data + signaling pins should be configured with slew-rate disabled when
GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets
the slew-rate as enabled for all pins. Adapt the device tree to comply
with these.
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com
SAMA7G5-EK board has DDR3L type of memory soldered. This needs 1.35V. The
1.35V for DDR3L rail at run-time is selected by the proper configuration
on SELV2 pin (for 1.35V it needs to be in high-z state). When suspended
the MCP16502 PMIC soldered on SAMA7G5-EK will use different sets of
configuration registers to provide proper voltages on its rail. Run-time
configuration registers could be configured differently than suspend
configuration register for MCP16502 (VSEL2 affects only run-time
configuration). In suspend states the DDR3L memory soldered on SAMA7G5-EK
switches to self-refresh. Even on self-refresh it needs to be powered by
a 1.35V rail. Thus, make sure the PMIC is configured properly when system
is suspended.
Fixes: 7540629e2f (ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210930154219.2214051-2-claudiu.beznea@microchip.com
Before commit 0e30f47232 ("mtd: spi-nor: add support for DTR protocol"),
for all PP command, it only support 1-1-1 mode, no matter the tx setting
in dts. But after the upper commit, the logic change. It will choose
the best mode(fastest mode) which flash device and spi-nor host controller
both support.
Though the spi-nor device on imx6sx-sdb/imx6ul(l/z)-14x14-evk board
do not support PP-1-4-4/PP-1-1-4, but if tx is 4 in dts file, it will also
impact the read mode selection. For the spi-nor device on the upper mentioned
boards, they support read 1-4-4 mode and read 1-1-4 mode according to the
device internal sfdp register. But qspi host controller do not support
read 1-4-4 mode. so need to set the tx to 1, let the common code finally
select read 1-1-4 mode, PP-1-1-1 mode.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Fixes: 0e30f47232 ("mtd: spi-nor: add support for DTR protocol")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The S5M8767 PMIC does not require anymore a safe DVS voltage, if the DVS
GPIO is not enabled. Although previously bindings required providing
this safe DVS voltage, but since commit 04f9f068a6 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") this
was ignored.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210928084949.27939-12-krzysztof.kozlowski@canonical.com
Add compatible values to Ethernet PHY subnodes representing Renesas
uPD60610 or uPD60611 PHYs on RZ/A1 boards. This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/335a1dfea905369da683e122e41e08ca1c5f90f7.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8201FL PHYs on RZ/A2 boards. This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/a23eca16869457684b0300379233e335b4e2047e.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing SMSC
LAN8710A PHYs on RZ/A1 and R-Mobile A1 boards. This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/247dc2074dae149af07b6d014985ad30eb362eda.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8041 PHYs on RZ/G1 and R-Car Gen2 boards. This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/f9e26625924f90eff34fe6f6f02b15fa272c5d80.1631174218.git.geert+renesas@glider.be
According to schematics, and confirmed by ID_REV register contents, the
Ethernet controllers on various development board are not SMSC LAN9220,
but different variants:
- KZM-A9-Dual and KZM-A9-GT: LAN9221,
- Bock-W and Marzen: LAN89218AQ.
Update the compatible values accordingly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/59c142176f795b3541c935df43ab11cecd77cc61.1631173813.git.geert+renesas@glider.be
Commit 078fb7aa6a ("arm: dts: vexpress: Fix addressing issues with
'motherboard-bus' nodes") broke booting on a couple of 32-bit VExpress
boards. The problem is #address-cells size changed, but interrupt-map
was not updated. This results in the timer interrupt (and all the
other motherboard interrupts) not getting mapped.
As the 'interrupt-map' properties are all just duplicates across boards,
just move them into vexpress-v2m.dtsi and vexpress-v2m-rs1.dtsi.
Strictly speaking, 'interrupt-map' is dependent on the parent
interrupt controller, but it's not likely we'll ever have a different
parent than GICv2 on these old platforms. If there was one,
'interrupt-map' can still be overridden.
Link: https://lore.kernel.org/r/20210924214221.1877686-1-robh@kernel.org
Fixes: 078fb7aa6a ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes")
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Reported-by: Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The core functions of string.c are those that may be implemented by
per-architecture functions, or overloaded by FORTIFY_SOURCE. As a
result, it needs to be built with __NO_FORTIFY. Without this, macros
will collide with function declarations. This was accidentally working
due to -ffreestanding (on some architectures). Make this deterministic
by explicitly setting __NO_FORTIFY and move all the helper functions
into string_helpers.c so that they gain the fortification coverage they
had been missing.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit bbc4d71d63 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") sets the RX/TX delay according to the phy-mode property in the
device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the
wrong setting.
Following the example of a900cac375 ("ARM: dts: sun7i: a20: bananapro:
Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
the Ethernet working again on this board.
Signed-off-by: Bastien Roucariès <rouca@debian.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210916081721.237137-1-rouca@debian.org
The SSI 1328 is a NAS box running a SL3516 SoC.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The edimax NS2502 is a NAS box running a SL3516 SoC.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently, it is no longer possible to retrieve a DHCP address
on the imx6qdl-pico board.
This issue has been exposed by commit f5d9aa79df ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").
Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.
Fixes: 98670a0bb0 ("ARM: dts: imx6qdl: Add imx6qdl-pico support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The micro-SD card doesn't feature a write-protect pin. Set the
corresponding property in the devicetree to handle this behavior
correctly and suppress driver warnings.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The MIC2025 switch input signal nEN is active low, describe it as such
in the DT. The previous change to this regulator polarity was incorrectly
influenced by broken quirks in gpiolib-of.c, which is now long fixed. So
fix this regulator polarity setting here once and for all.
Fixes: 3c3601cd6a ("ARM: dts: imx53: Update USB configuration on M53Menlo")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The panel already contains pinctrl-0 phandle, but it is missing
the default pinctrl-names property, so the pin configuration is
ignored. Fill in the missing pinctrl-names property, so the pin
configuration is applied.
Fixes: d81765d693 ("ARM: dts: imx53: Update LCD panel node on M53Menlo")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- ranges property should be grouped by region, with no functional
changes. Otherwise, schema dtbs_check would report the following errors.
"linux-imx/arch/arm/boot/dts/imx6qp-vicutp.dt.yaml: pcie@1ffc000: ranges: 'oneOf' conditional failed, one must be fixed:
linux-imx/arch/arm/boot/dts/imx6qp-vicutp.dt.yaml: pcie@1ffc000: ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640]] is not of type 'boolean'
True was expected
[[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640]] is not of type 'null'
[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640] is too long
From schema: linux-imx/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml"
- refer to commit 281f1f99cf ("PCI: dwc: Detect number of iATU windows").
The num-viewport is not required anymore, remove them totally.
- dt_binding_check complains "compatible: ['fsl,imx6qp-pcie', 'snps,dw-pcie']
is too long", remove "snps,dw-pcie" from the compatible string.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the ADC nodes to the AST2600 devicetree. Enable ADC1 for Rainier and
Everest systems and add an iio-hwmon node for the 7th channel to report
the battery voltage.
Tested on Rainier:
~# cat /sys/class/hwmon/hwmon11/in1_input
1347
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210916210045.31769-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The following warning is seen when the SPI GPIO driver probes:
gpio-expander@0 enforce active low on chipselect handle
The reason for this warning is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
[ 4.854337] m25p80@0 enforce active low on chipselect handle
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
[ 4.854337] m25p80@0 enforce active low on chipselect handle
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
[ 4.854337] m25p80@0 enforce active low on chipselect handle
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since the reg property was added to each channel node in commit
b86d3d21cd ("ARM: dts: imx6dl-yapp4: Add reg property to the lp5562
channel node") it is possible to skip unused channels.
Remove the actually unused white LED channel.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since the LED multicolor framework support was added in commit
92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Author of the framework attempted to accommodate this DT to the
framework in commit b86d3d21cd ("ARM: dts: imx6dl-yapp4: Add reg property
to the lp5562 channel node") but that is not sufficient. A color property
is now required even if the multicolor framework is not used, otherwise
the driver probe fails:
lp5562: probe of 1-0030 failed with error -22
Add the color property to fix this.
Fixes: 92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: <stable@vger.kernel.org>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The MAC-Address of the MR32's sole ethernet port is
located in offset 0x66 of the attached AT24C64 eeprom.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
the switch identifies itself as a BCM53012 (rev 5)...
This patch has been tested & verified on OpenWrt's
snapshot with Linux 5.10 (didn't test any older kernels).
The MR32 is able to "talk to the network" as before with
OpenWrt's SWITCHDEV b53 driver.
| b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
| libphy: dsa slave smi: probed
| b53-srab-switch 18007000.ethernet-switch poe (uninitialized):
| PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
| b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks.
| Please migrate to PHYLINK!
| DSA: tree 0 setup
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
BCM53573 family SoC have Ethernet switch connected to the first Ethernet
controller (accessible over MDIO).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
To match the new dts binding. Remove "subsys",unused
interrupt and slot node.Add "interrupt-names",
"linux,pci-domain" and pciecfg node.
Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/20210823032800.1660-7-chuanjia.liu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The partitions on the eMMC will not even appear sometimes, in the
datasheet for the Samsung KLMxGxxE4x we find that the power-on time
for a 4GB eMMC of this type is 300 ms and nowadays the block stack
is so fast so we are stressing it, and we need to specify that we
need this delay in the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A new dtsi file for sama5d29 SoC is added which basically inherits the sama5d2
dtsi with the mac controller compatible property updated.
Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210812140758.28273-1-Hari.PrasathGE@microchip.com
This went unnoticed until commit 7897b071ac ("net: macb: convert
to phylink") which tickled the problem. The sama5d3 emac has never
been capable of rgmii, and it all just happened to work before that
commit.
Fixes: 21dd0ece34 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se
With the conversion of rockchip,rk-timer.yaml the clock-names order
was set to "pclk", "timer", but nothing was fixed in the ARM dts section
of the mainline kernel, so the swap timer clock-names that don't fit.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210828102659.7348-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
After the conversion to YAML of the Operating Performance Points(OPP)
binding the operating-points property expects values in
a uint32-matrix with 2 items, so fix the notifications by adding
angle brackets.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/opp/opp-v1.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210828091233.19992-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
After the conversion to YAML of the Operating Performance Points(OPP)
binding the operating-points-v2 property expects the nodename to have
the '^opp-table(-[a-z0-9]+)?$' format, so rename all Rockchip ARM dts
opp-table node names.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/opp/opp-v2.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210828094512.26862-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rv1108 gmac node is checked with rockchip-dwmac.yaml,
snps,dwmac.yaml and ethernet-controller.yaml.
The nodename should have a pattern: "^ethernet(@.*)?$",
so change to nodename.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210828114240.12231-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The MK808 has a button inside the cover for the boot loader to do
some action. Add the adc-keys node to the rk3066a-mk808.dts file.
The rk3066 has a higher maximum DC supply voltage for the analog part of
SAR-ADC VDDA_SARADC of 2.75V then other Rockchip SoCs.
For the "rockchip,saradc" node is a vref-supply property required,
so add a regulator for it as well.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210828092755.24560-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
