These changes are mostly minor non-urgent fixes for typos and binding checks.
The system-power-controller gets configured for more am3 devices as it's not
am335x-boneblack speicif. For for am437x we add magnetic card reader support.
Note that the asahi-kasei,ak8975 binding changes may produce a new binding
check warning as the binding related change is merged separately.
-----BEGIN PGP SIGNATURE-----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=LVA6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Vsxc
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.17/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.17 merge window
These changes are mostly minor non-urgent fixes for typos and binding checks.
The system-power-controller gets configured for more am3 devices as it's not
am335x-boneblack speicif. For for am437x we add magnetic card reader support.
Note that the asahi-kasei,ak8975 binding changes may produce a new binding
check warning as the binding related change is merged separately.
* tag 'omap-for-v5.17/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: Use correct vendor prefix for Asahi Kasei Corp.
ARM: dts: motorola-mapphone: Drop second ti,wlcore compatible value
ARM: dts: am437x-gp-evm: enable ADC1
ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module
ARM: dts: am437x-cm-t43: Use a correctly spelled DT property
ARM: dts: am335x-icev2: Add system-power-controller to RTC node
ARM: dts: am335x-boneblack-common: move system-power-controller
ARM: dts: elpida_ecb240abacn: Change Elpida compatible
Link: https://lore.kernel.org/r/pull-1639659798-679261@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add OPP tables and power domains to all peripheral devices which
support power management on Tegra20 SoC.
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Extend memory OPPs with 500 MHz entry. This clock rate is used by ASUS
Transformer tablets.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PEB-AV-02 expansion adapter extends the phyBOARD-Mira boards to
connect parallel LCD displays, either with capacitive or resistive
touch.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PHYTEC PEV-EVAL-01 expansion board adds support for additional
gpio-triggered user-leds and gpio-key support.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add USB overcurrent pin muxing on SoM layer. On DRC02 and PDK2 the USB
overcurrent pin isn't connected, but a USB hub on the board takes care
of the USB overcurrent instead. Therefore disable it there with the
property disable-over-current.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently, the imx6q-wandboard Ethernet does not transmit any
data.
This issue has been exposed by commit f5d9aa79df ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").
Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.
Fixes: 77591e4245 ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description")
Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Wacom I2C support for the reMarkable 2 eInk tablet using the
generic I2C HID framework.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This property doesn't seem to exist in the documentation nor
in source code, but for some reason it is defined in a bunch
of device trees.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211123161919.1506755-1-danct12@riseup.net
Make Nexus 7 device-tree to use common LVDS bridge description. This makes
device-trees more consistent.
[digetx@gmail.com: factored Nexus7 change into separate patch and wrote commit message]
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
CPU of Nyan Chromebooks is overheating badly because apparently hardware
soctherm controller doesn't work well. Add CPU thermal zones to enable
software thermal control over CPU and fix the overheat trouble.
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable CPU DFLL node on Nyan Chromebooks. DFLL was previously disabled due
to Linux kernel CPUFreq driver which didn't support suspend-resume. That
problem was fixed years ago, but DFLL was never re-enabled.
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable HDMI CEC on Nyan Chromebooks. It allows to control TV over HDMI.
Suggested-by: Thomas Graichen <thomas.graichen@gmail.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If an USB port is an OTG port, then we should add the usb-role-switch
property. Otherwise XUSB setup fails and therefore padctl is unable to
set up the ports. This leads to broken USB and PCIe ports. Add the
usb-role-switch properties to Tegra124 device-trees to fix the problem.
The error message shown without this patch is e.g:
usb2-0: usb-role-switch not found for otg mode
[digetx@gmail.com: improved commit message]
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add dedicated device-tree for 1080p version of Nyan Big in order to
describe display panel properly. FHD panel doesn't support modes other
than 1080p, hence it's wrong to use incompatible lower resolution panel
in device-tree.
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device-tree for ASUS Transformer Pad TF300TG, which is a NVIDIA
Tegra30-based 2-in-1 detachable, originally running Android. It's a
variant of the TF300T that has a 3G modem.
Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(asus-tf300t)
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>
All Tegra30 ASUS tablets have a similar design pattern in terms of
hardware integration of LVDS display panels, like exactly the same GPIOs
are used for power and reset, etc. Add a common device-tree for LVDS
display panels of Tegra30 ASUS tablets to avoid replicating the
boilerplate panel description.
[digetx@gmail.com: factored out common part into separate patch and wrote commit message]
Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add common DTSI for Tegra30 ASUS Transformers. It will be used by multiple
device-trees of ASUS devices. The common part initially was born out of
the ASUS TF300T tablet's device-tree that was created by Michał Mirosław.
It was heavily reworked and improved by Svyatoslav Ryhel, Maxim Schwalm,
Ion Agorria et al.
[digetx@gmail.com: factored out common part into separate patch and wrote commit message]
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Co-developed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move the default state pinmux definition into the pinmux node. There's
no need for the indirection via the phandle.
Note that the phandle indirection is kept for the EMC operating
performance point tables because they reference nodes that are defined
in an external file.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the correct "reset-gpios" property for the I2C mux reset GPIO
reference instead of the deprecated "reset-gpio" property.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SLINK controller found on Tegra30 is not compatible with its
predecessor found on Tegra20. Drop the fallback compatible string.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Ouya board specifies the #reset-cells property for the GPIO
controller. Since the GPIO controller doesn't provide reset controls
this is not needed, so they can be dropped.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The clock-frequency property was never used and is deprecated now.
Remove it from Nexus 7 device-tree.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The +V1.2_VDD_CORE regulator on Apalis and Colibri boards uses the
unsupported ti,vsel{0,1}-state-low properties. It turns out that these
are in fact the default and can be overridden by ti,vsel{0,1}-state-high
properties if needed. Drop them since they are not needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Medcom Wide and PAZ00 boards don't specify the power supply for the
backlight, which means that the Linux driver will provide a dummy one.
Wire up an explicit dummy to also make the DT schema validation succeed.
Unfortunately I don't have access to the schematics for the Medcom Wide,
so I don't know if a more accurate description is possible.
The AC100 (PAZ00) schematics from here:
https://www.s-manuals.com/pdf/motherboard/compal/compal_la-6352p_r1.0a_schematics.pdf
aren't entirely clear which one of the supplies powers backlight, but
the panel supply is probably close enough.
Based on work by David Heidelberg <david@ixit.cz>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PHY reset GPIO references belong in the USB PHY nodes, where they
already exist. There is no need to keep them in the USB controller's
device tree node as well.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The device tree node for the built-in ASIX Ethernet device on Colibri
boards needs a compatible string in order to pass DT schema validation.
Add the USB VID,PID compatible string as required by the DT schema for
USB devices.
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
The "pwm-" prefix currently matches the DT schema for PWM controllers
and throws an error in that case. This is something that should be fixed
in the PWM DT schema, but in this case we can also preempt any such
conflict by naming the nodes after the pins like we do for many others
of these nodes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make the order of the clocks and clock-names properties match the order
in the device tree bindings. This isn't strictly necessary from a point
of view of the operating system because matching will be done based on
the clock-names, but it makes it easier to validate the device trees
against the DT schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CML1 and PLL_E clocks are never explicitly used by the AHCI
controller found on Tegra124, so drop them from the corresponding device
tree node.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The I2C controller found on Tegra124 is not fully compatible with the
Tegra114 version, so drop the fallback compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
OPP table name now should start with "opp-table" and OPP entries
shouldn't contain commas and @ signs in accordance to the new schema
requirement. Reorganize CPU and EMC OPP table device-tree nodes.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DT schema requires that nodes representing thermal zones include a
"-thermal" suffix in their name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When the Tegra High-Speed UART is used instead of the regular UART, the
reg-shift property is implied from the compatible string and should not
be explicitly listed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to be able to pass DT schema validation, change the GPU nodes'
unit-address to the standard notation. Previously this was using a "0,"
prefix that originated from a time when the top-level device tree node
contained #address-cells = <2>.
Note that this technically breaks backwards-compatibility with certain
older versions of the U-Boot bootloader because early versions used a
hard-coded DT path lookup to find the GPU node and perform some fixups
on it. However, this was changed to a compatible string based lookup in
April 2016, so it's reasonable to expect people to update U-Boot on the
systems that they want to use this updated kernel DTB with.
Signed-off-by: Thierry Reding <treding@nvidia.com>
GPIO hog nodes must have a "hog-" prefix or "-hog" suffix according to
the DT schema. Rename all such nodes to allow validation to pass.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra memory controller provides reset controls for hotflush reset,
so the #reset-cells property must be specified.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TKE (time-keeping engine) found on Tegra114 and later is no longer
backwards compatible with the version found on Tegra20, so update the
compatible string list accordingly.
Note that while the hardware block is strictly backwards-compatible, an
architectural timer exists on those newer SoCs that is more reliable, so
that should always be preferred.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regulators defined at the top level in device tree are no longer part of
a simple bus and therefore don't have a reg property. Nodes without a
reg property shouldn't have a unit-address either, so drop the unit
address from the node names. To ensure nodes aren't duplicated (in which
case they would end up merged in the final DTB), append the name of the
regulator to the node name.
[treding@nvidia.com: factored out patch and wrote commit message]
Signed-off-by: David Heidelberg <david@ixit.cz>
Co-developed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Clocks defined at the top level in device tree are no longer part of a
simple bus and therefore don't have a reg property. Nodes without a reg
property shouldn't have a unit-address either, so drop the unit address
from the node names. To ensure nodes aren't duplicated (in which case
they would end up merged in the final DTB), append the name of the clock
to the node name.
[treding@nvidia.com: factored out patch and wrote commit message]
Signed-off-by: David Heidelberg <david@ixit.cz>
Co-developed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PMIC found on Dalmore, TN7 and Roth is a TPS65913, so add the
specific compatible string in addition to the generic Palmas series
compatible string.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The external memory controller should be sorted after the memory
controller to keep the ordering by unit-address intact.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Identify the PHY by its compatible ID value. In some cases during
boot, the PHY needs to be reset to be accessible, but this is only
possible if the PHY is recognized. In that case, the automatic
detection of the PHY does not work and a static compatible ID
value is need.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to datasheet Microchip LAN8710A/LAN8710Ai DS00002164B [1]
the reset should stay asserted for at least 100uS and software
should wait at least 200nS. On other DHCOM SoMs with the SMSC
LAN8710Ai PHY both reset delays are 500us. This should be plenty
and for consistency, the i.MX6 SoM should also use these delays.
[1] https://ww1.microchip.com/downloads/en/DeviceDoc/00002164B.pdf
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Add the LEDs to the Freecom FSG-3 that were missing.
- Add a devicetree for the Gorami MultiLink Router
- Add a devicetree for the Gateway GW7001 Router
This completes the migration of all IXP4xx devices to
device tree files.
Next merge window we will delete the remaining board files,
it cannot be done now because of cross-tree dependencies.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmG34tsACgkQQRCzN7AZ
XXN4ZxAAvGLWHQQskEKIuwxjoFYstku52Wxg2eyBUgTEVfu1hSYWhzVfS1R216D1
fySzBkGprctHw8hoMDEZFFjd9zkpeS17Y0evAq9qka7I1pnZTHAhLYGG/jeLd15Y
xCTSDk+6Z2RGRjRC3NkRuxog9st7/EnJaDVInV5GuyA0Nev4s1nqgY6TfWNabhcY
NvRnrF55JK7KAELRsFMTbYvSqNe65w7hunysOIUPTalaGWA9DtPcm27aavzYiNgi
q1TBRorkQLV10TH3PWRPu7uVK/YqBIqrf3RzT6X/XfKk0SPg99eQguSt8kZ1U3HA
ao3uo9F1I9HYbxgfNvLrWRRh/PIoAnD2kHzfAKTH5xWrPpLOc3JDsLHorFh3p6+n
HJIZzQQwcLV/atFRa/hb3r61hwOVArx5svtk2g/6ELj9BU/3zOc0wFffYc5fhSAd
+SGMdx2PC08JTYvMm8dxp/zt2ItqnqO716TcPpX5bUUEg1jttp8HQJNXxPNTlFNT
AsfhC6jhEXfgGgeJf3iEEzmfYCqb0GWm6oRVynzLanr+MHQNNcHdMKl9CKnU/VS4
HOP2e+DCh51eD7H2CENIuEDjpOuSdp5dh7oFZGmjvqWbJcc/2lAHAWVEOz8aKQJl
4LGUToHCc/+J63eS1a33tjAaBpGa5ELmH16ejRbrfk9S+YJ9P/I=
=Hzm2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LdLA
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dtx-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS changes for v5.17:
- Add the LEDs to the Freecom FSG-3 that were missing.
- Add a devicetree for the Gorami MultiLink Router
- Add a devicetree for the Gateway GW7001 Router
This completes the migration of all IXP4xx devices to
device tree files.
Next merge window we will delete the remaining board files,
it cannot be done now because of cross-tree dependencies.
* tag 'ixp4xx-dtx-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Add devicetree for Gateway 7001
ARM: dts: Add Goramo MultiLink device tree
ARM: dts: Add FSG3 system controller and LEDs
Link: https://lore.kernel.org/r/CACRpkdYiWK7TEbZrh4_0WT5obMk=ZSc7AQVUSPXL+-uZ_hsUEA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"fsl,imx-ckih1" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckil" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-osc" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckih2" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckih1" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckil" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-osc" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckih2" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckih1" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckil" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-osc" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckih2" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckih1" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-ckil" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-osc" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-osc" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx-clk32" is useless since no driver deals with it, so let's drop it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The nxp,imx7-mipi-csi2.yaml binding requires ports to be grouped in a
ports node, as multiple ports are present. Fix imx7s.dtsi and the only
board file that references the mipi_csi ports.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reset-names property isn't defined by the nxp,imx7-mipi-csi2.yaml
binding, and isn't used by the corresponding driver as it acquires the
reset with a NULL ID. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The fsl,csis-hs-settle property isn't defined by the
nxp,imx7-mipi-csi2.yaml binding, and isn't parsed by the corresponding
driver. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With the updated dt-bindings for the spba-bus, rename spba@xxxx
to spba-bus@xxxx. There are no functional changes.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYbdvvAAKCRAfOrpwrNPN
DBVFAP9n8QGFvjmhgc5MjMp7cfYziVlRTXW16rejmVHXZIGMOgD/dTj3jffyVGQK
+n9vhUqa+apnVjufzwvy0RpMzRc+iwY=
=8QU6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aUEQ
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT #1 for 5.17:
- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit
* tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: Add QSPI0 node
ARM: dts: at91: sama7g5: Add QSPI nodes
ARM: dts: at91: sama5d2: Name the qspi clock
ARM: dts: at91: add Microchip EVB-KSZ9477 board
ARM: dts: at91: sama5d2_xplained: remove PA11__SDMMC0_VDDSEL from pinctrl
ARM: dts: at91: update alternate function of signal PD20
Link: https://lore.kernel.org/r/20211213161451.90786-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DragonBoard 410c is a convenient device for testing and debugging.
Since there is support for using ARM32 kernels on MSM8916 now, also
build the DB410c DTB on ARM32 so it can be used for testing. ARM64
is still the main supported architecture for DB410c but it actually
works great on ARM32 as well.
The "apq8016-sbc.dts" is simply included as-is from ARM64 similar
to the approach used for Raspberry Pi (e.g. bcm2711-rpi-4-b.dts).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-1-stephan@gerhold.net
Steven Maddox reported in the OpenWrt bugzilla, that his
RaidSonic IB-NAS4220-B was no longer booting with the new
OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was
working with the previous OpenWrt 19.07 series (uses 4.14).
|[ 5.548038] No RedBoot partition table detected in 30000000.flash
|[ 5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0
|[ 5.739093] No RedBoot partition table detected in 30000000.flash
|...
|[ 7.039504] Waiting for root device /dev/mtdblock3...
The provided bootlog shows that the RedBoot partition parser was
looking for the partition table "at offset 0x0". Which is strange
since the comment in the device-tree says it should be at 0xfe0000.
Further digging on the internet led to a review site that took
some useful PCB pictures of their review unit back in February 2009.
Their picture shows a Spansion S29GL128N11TFI01 flash chip.
>From Spansion's Datasheet:
"S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors"
Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his
unit: "131072".
With the 128 KiB Sector/Erasesize in mind. This patch changes the
fis-index-block property to (0xfe0000 / 0x20000) = 0x7f.
Fixes: b5a923f8c7 ("ARM: dts: gemini: Switch to redboot partition parsing")
Reported-by: Steven Maddox <s.maddox@lantizia.me.uk>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Steven Maddox <s.maddox@lantizia.me.uk>
Link: https://lore.kernel.org/r/20211206004334.4169408-1-linus.walleij@linaro.org'
Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SPEAr320s SOC is a SPEAr320 SOC variant.
Mostly identical to the SPEAr320 SOC variant, it has a
new interrupt routing for PL_PGIOs.
Add spear320s.dtsi to handle SPEAr320s SOC
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20211202095255.165797-7-herve.codina@bootlin.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Resources used by plgpio and pinmux are conflicting on SPEAr310
and SPEAr320.
Use the newly introduced regmap property in plgpio node to use
pinmux resources from plgpio and so avoid the conflict.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20211202095255.165797-5-herve.codina@bootlin.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
regression that LCDIF driver stops probe, because interconnect
provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG0BOsUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6BFAgArJtx8QmpSgBGPXfWtvu5F63J2lfy
aTBuXvLQACly80yWwTsm0GLvtc8nKDsPIU6PodfL8OPHEG1IqqgOkUP2rP6JTh2f
IoIXMYBITdSfETW99GO4Yd7RDQ2KXvPkfHlDUTvgWV+8NJPrttSNgP4lCeNR9Me+
wM/OhWNQGssKvEs2/Myr3Nq9QutCfGxJYdODu3hOHBfvASwpZCiRAFB2RJefshJq
1S9ML8cDkQYNRys7LN2Ynby0Hpa8MdXLn6/JEA/C+jrBjxEL8KE+pFCHeptXWzZY
Yj+9DEdRTAt9rhpojXjfGdssJwlOK/IYlrjLfNsplYKM0PNLzqdj/s9i/g==
=w2VR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B220
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.16, round 2:
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
regression that LCDIF driver stops probe, because interconnect
provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.
* tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Vladimir Oltean to update SJA1105 switch RGMII delay for
a few boards, so that kernel doesn't warn on the legacy bindings.
- Remove redundant interrupt declaration for gpio-keys on board
ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15
and later.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmGgsRAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7cvAgAqnWK9OcpXErsi/ACWOqJ64F4yT8k
ePzcGPvzFeNbuk2bm8l/zz7WueoKzM5tvk9bocwyUveXDwIIBIC6CoDU0yiHHh9P
x9hhoU9VaY0GhFKzBfCuMXb7i0r5QIMOH++TJ1muFP+wRgBkGdPhyL+ijvd1EhQK
K0QB+izgdcI1TvCypC2eZMY5vsyOCmnqE3EpQVzJSDfzJeFa48jFZ2eybGd6l9AQ
/3W4nWQwS/930TbMSM1hh24v8gGxwei+GWbwPREKT2Fu/Rj9jctX2s01/nsMu73Q
0bpf7nXx+uxS3CaN8vWIKEDRHsOeHPIIJ7wwBShIwh3XQtLb6lmS546rXA==
=8XSh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3mvY
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.16:
- A series from Vladimir Oltean to update SJA1105 switch RGMII delay for
a few boards, so that kernel doesn't warn on the legacy bindings.
- Remove redundant interrupt declaration for gpio-keys on board
ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15
and later.
* tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch
ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch
ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch
Link: https://lore.kernel.org/r/20211126100716.GF4216@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Naming clocks is a good practice. The atmel-quadspi driver supports
an unnamed clock for the peripheral clock in order to be backward
compatible with old DTs, but it is recommended to name the clocks
on new DTs. The driver's bindings file requires the clock-names
property, so name the clock.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211209102542.254153-1-tudor.ambarus@microchip.com
The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.
Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.
Reported-by: David Heidelberg <david@ixit.cz>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
this helps human readers considerably to determine the line name for a
given offset or vice versa.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[ nsaenz: corrected patch title ]
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://lore.kernel.org/r/20211130161147.317653-1-u.kleine-koenig@pengutronix.de
This adds a device tree for the Gateway 7001 AP, based on
Intel IXP422.
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The old "ak" vendor prefix that was never officially accepted was still
being used in some device trees. Convert to the correct vendor prefix
(i.e. "asahi-kasei").
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TI wlcore DT bindings specify using a single compatible value for
each variant, and the Linux kernel driver matches against the first
compatible value since commit 078b30da3f ("wlcore: add wl1285
compatible") in v4.13.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ADC0 and ADC1 pins are available on external connector J22.
Enable ADC1 which was missing.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This hardware module is close to the am33xx ADC module but instead of
featuring a touchscreen it has a magnetic reader capability.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
